sE Electronics V7MC2STMP3 V7 MC2 Wireless Mic Capsule

The sE Electronics V7MC2STMP3 is a V7 MC2 dynamic wireless microphone capsule made for use with compatible Sennheiser handheld wireless transmitters. It lets vocalists and presenters bring the V7 microphone platform to an existing wireless system rather than replacing the complete transmitter setup. This version is supplied in the standard grey finish with an MP03 protective pouch and thread cover.

Designed for vocals and speech, the V7 MC2 uses a supercardioid pickup pattern to focus on the intended voice while reducing pickup from surrounding sources. Its 40 Hz to 19 kHz frequency range and aluminum voice coil are engineered for a clear, open vocal character. The directional pattern also supports use on stages where monitor and PA placement must be considered carefully.

The capsule uses sE Electronics' DMC7 dynamic capsule design with a neodymium magnet and 300-ohm electrical impedance. Sensitivity is rated at 2.0 mV/Pa, or -54 dBV. These specifications match the V7 sound platform in a capsule format intended for compatible Sennheiser wireless handheld transmitters.

A patented integrated shockmount helps isolate the capsule from mechanical vibration to reduce handling-related noise. An internal windscreen helps control wind noise and vocal plosives, and a spare black internal windscreen is included for replacement or appearance customization. Gold-plated contacts provide the connection between the capsule and transmitter.

The V7 MC2 is a practical upgrade path for performers, houses of worship, event presenters, and production teams already using a compatible Sennheiser handheld wireless system. Its all-metal design is built around a zinc-alloy chassis and spring-steel grille. The included MP03 pouch and thread cover help protect the capsule when it is removed from the transmitter for transport or storage.

Key Features

• Sennheiser System Compatibility: Designed for compatible Sennheiser wireless handheld transmitters.
• Supercardioid Pattern: Focuses on the vocalist or speaker while reducing surrounding pickup.
• Dynamic DMC7 Capsule: Uses an aluminum voice coil and neodymium magnet.
• Integrated Shockmount: Helps reduce mechanical vibration and handling noise.
• Gold-Plated Contacts: Provide a reliable capsule-to-transmitter signal connection.
• MP03 Protection Set: Includes a protective pouch and thread cover for storage.

Design & Installation

The V7 MC2 uses an all-metal construction with a durable zinc-alloy chassis and a beveled spring-steel grille. The grille's beveled edge helps reduce rolling when the transmitter is set on a flat surface. An internal windscreen is fitted inside the grille, with a spare black screen included.

This is a replacement or upgrade capsule, not a complete wireless microphone system. Install it only on a confirmed compatible Sennheiser handheld transmitter, following the transmitter and capsule instructions; a wireless transmitter, receiver, and associated system components are required for operation. Keep the thread cover on the capsule connection during storage, and use the included MP03 pouch for transport.