Ortofon STYLUS NCS Nightclub S Replacement Stylus

The Ortofon STYLUS NCS Nightclub S is a replacement stylus assembly for legacy Ortofon Nightclub S DJ cartridge systems. It restores the tracking and playback characteristics of a worn Nightclub S stylus without requiring replacement of the compatible cartridge body. It is intended for DJs who use vinyl in performance-focused setups.

This stylus uses a spherical diamond tip designed for dependable groove contact during scratching, back-cueing, mixing, and beat juggling. Its recommended 3.0 g tracking force provides a practical setup target for compatible turntables and tonearms. The specified tracking-force range extends from 2.0 to 5.0 g.

Ortofon specifies a 6 mV output level at 1 kHz and 5 cm/sec when used in its intended cartridge system. The published frequency response is 20 Hz to 20 kHz, rated +3 / -2 dB. This combination suits DJ playback where stable tracking and useful output level are important.

The Nightclub S stylus has an R 18 µm spherical tip radius and a 20-degree tracking angle. Ortofon rates tracking ability at 80 µm at 315 Hz with the recommended tracking force. These specifications support cueing and record handling techniques that place added demands on stylus stability.

STYLUS NCS is a replacement part rather than a complete cartridge or turntable system. It is made for compatible Ortofon Concorde Nightclub Series and OM Nightclub Series cartridge applications. Replace the existing stylus carefully, then rebalance the tonearm and set tracking force before playback.

Key Features

• Nightclub S Replacement: Restores a compatible Ortofon Nightclub S cartridge setup.
• Spherical Diamond Tip: Supports stable groove contact during DJ handling.
• R 18 µm Tip Radius: Uses Ortofon's specified spherical stylus profile.
• 3.0 g Recommended Tracking: Provides the manufacturer's primary setup target.
• 20 Hz–20 kHz Response: Covers the specified DJ playback frequency range.
• 80 µm Tracking Ability: Helps maintain contact during cueing and scratching.

Design & Installation

The STYLUS NCS is a yellow spherical replacement stylus assembly for the Ortofon Nightclub S family. Its diamond stylus has an R 18 µm spherical profile and a specified 20-degree tracking angle. The design is intended for the high-contact demands of DJ mixing, back-cueing, and scratching.

Install this stylus only on a compatible Ortofon Nightclub Series Concorde or OM cartridge body. With the turntable powered off, remove the worn stylus and fit the replacement without touching the diamond tip; then set the tonearm to the recommended 3.0 g tracking force. Confirm proper alignment, tonearm balance, and clean record condition before performance use.