Rockford Fosgate P2V2-65HO 6.5" 2-Way Convertible Speakers

The Rockford Fosgate P2V2-65HO is a pair of 6.5-inch, 2-way convertible car speakers designed for vehicles that need either a traditional coaxial replacement or a separate-tweeter component layout. Its removable tweeters let the same set adapt to a single factory door location or to systems with dash or A-pillar tweeter positions. This flexibility helps simplify an upgrade when the vehicle’s original speaker arrangement varies by trim level.

Each speaker uses a 2-ohm high-output design and is rated for 75 watts RMS and 150 watts peak power. The system covers a stated 49 Hz to 25 kHz frequency range, pairing midbass capability with a dedicated 3/4-inch inverted-dome tweeter. It is suited to listeners who want a more capable front-stage upgrade while retaining the option to use factory-style locations.

Rockford Fosgate’s I.L.M. Interchangeable Locking Mechanism allows the tweeter to lock into the woofer for coaxial operation or be removed for component-style installation. When the tweeter is relocated, the included woofer phase plug installs in its place. This approach keeps the woofer assembly configured correctly in either setup.

The P2V2-65HO combines a mica-reinforced polypropylene cone, Santoprene half-roll surround, linear Nomex spider, and a glass-fiber-reinforced PA66 composite basket. Its vented Kapton voice-coil former and Y35 ferrite motor structure are engineered for thermal management and controlled operation. A removable motor cover also helps when rear mounting clearance is limited.

For component-style use, the package includes external passive crossover networks with a 9 kHz, 12 dB-per-octave high-pass filter and selectable 0 dB or -3 dB tweeter input. The tweeters can be installed in the included flush- or surface-mount cups, while coaxial use keeps installation concentrated at the woofer location. Mounting hardware and a cutout template are included, but speaker grilles are sold separately.

Key Features

• Convertible Configuration: Use as coaxial speakers or separate-tweeter components.
• 2-Ohm High Output: Designed for compatible 2-ohm vehicle audio applications.
• I.L.M. Tweeter Lock: Secures or releases the tweeter from the woofer.
• External Passive Crossovers: Support separate tweeter installation with selectable attenuation.
• Durable Woofer Construction: Reinforced cone, surround, spider, and composite basket.
• Removable Motor Cover: Helps accommodate tighter mounting-depth applications.

Design & Installation

The P2V2-65HO uses a 20–40% mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, linear Nomex spider, braided tinsel leads, and a 15% glass-fiber-reinforced PA66 basket. The high-strength Y35 ferrite motor is paired with an overhung voice coil and vented Kapton former. Copper spring contacts in the tweeter cups support front-side tweeter servicing, and the motor cover can be removed where depth is restricted.

Confirm the vehicle’s available mounting space before purchase: the stated speaker cutout diameter is 5.42 inches, mounting depth is 2.50 inches with the motor cover or 2.26 inches without it, and front clearance is 0.43 inch. For coaxial use, retain the tweeter in the woofer; for a component layout, remove the tweeter, install the supplied phase plug, and use the included external passive crossover. Check amplifier or factory-system compatibility with the speakers’ 2-ohm nominal impedance, and note that grilles are not included.