Rockford Fosgate GF-25 2.5" Flush Mount Speaker Grilles

The Rockford Fosgate GF-25 is a pair of 2.5-inch flush-mount speaker grilles designed for select Punch V2 speaker installations. It provides a finished, low-profile appearance by mounting the grille assembly into the panel rather than sitting above it. This makes it a practical accessory for custom vehicle audio panels where speaker protection and a clean visual result are both important.

The GF-25 is intended for installers and enthusiasts building systems around compatible Rockford Fosgate 2.5-inch Punch V2 speakers and component-system midranges. It is compatible with the P1V2-25 and P3V2-25, plus the 2.5-inch midrange locations used in P3V2-65, P3V2-69, and P3V2-69C2 systems. It is not a speaker itself, so speaker output, power handling, and tonal balance remain determined by the companion speakers and system setup.

Its flush-mount structure uses a metal bezel and C-backer arrangement to secure the assembly through a prepared panel opening. The grille mesh installs into keyed slots in the bezel after the speaker is mounted. This arrangement covers the speaker while preserving a tidy, integrated installation layout.

For GF-25 installations, Rockford Fosgate includes grille mesh pieces, flange locator rings, metal bezels, C-backers, machine screws, and a cutout template. The flange locator ring is used with compatible speakers that have Twist-Lock flanges. A 3.86-inch cutout and 0.93-inch mounting depth should be planned into the mounting surface before installation.

The GF-25 is well suited to a system upgrade where compatible Punch V2 speakers are being installed in a custom door, dash, kick-panel, or interior panel location. Its 4.57-inch outer diameter creates a larger finished trim area around the 2.5-inch speaker opening. Use it only with the listed compatible models and confirm clearance behind the panel for the C-backer, wiring, and speaker assembly.

Key Features

• Flush-Mount Format: Recesses the grille assembly into the panel for a low-profile finished appearance.
• 2.5-Inch Speaker Fitment: Designed around compatible 2.5-inch Punch V2 speaker applications.
• Specified Compatibility: Fits P1V2-25, P3V2-25, P3V2-65, P3V2-69, and P3V2-69C2 applications.
• Metal Bezel Assembly: Uses a metal bezel and C-backer to secure the flush-mount structure.
• Keyed Grille Mesh: Mesh aligns with the bezel's keyed slots for proper final assembly.
• Included Cutout Template: Helps mark the required panel opening before cutting and mounting.

Design & Installation

The GF-25 uses a multi-piece flush-mount design with grille mesh, a metal bezel, C-backer, and flange locator ring for applicable Twist-Lock speaker frames. Its specified outer diameter is 4.57 inches, while the mounting depth is 0.93 inches. The grille mesh snaps into the metal bezel after the speaker has been secured.

Plan for a 3.86-inch cutout and inspect the rear of the mounting location for wiring, window tracks, or other obstructions before cutting. The C-backer is positioned behind the panel and joined to the metal bezel with the supplied longer screws; the compatible speaker then attaches with the shorter screws. Pull and connect speaker wiring before final assembly, align the grille logo, press the mesh into the keyed bezel slots, and test the audio system after installation.