Gravity GR-1386H 5.25" 2-Way Coaxial Car Speakers

The Gravity GR-1386H is a pair of 5.25-inch, 2-way coaxial car speakers designed as a replacement or upgrade for compatible factory speaker locations. Its coaxial layout places the tweeter and main cone in one speaker assembly, helping simplify installation where separate component speakers are not needed. The speakers use a 4-ohm design for use with compatible car audio systems.

These speakers are suited to drivers replacing worn, damaged, or basic factory speakers in vehicles that accept 5.25-inch speakers. The published 60 Hz to 20 kHz frequency response covers bass, midrange, and treble information within the stated range. An 88 dB sensitivity rating is specified for the GR-1386H.

Each GR-1386H speaker combines a silver alpha cellulose cone with a moisture-resistant rubber surround. This material combination is paired with a Neo Mylar soft-dome tweeter for high-frequency reproduction. The result is a compact full-range coaxial speaker format intended for everyday in-car listening.

Gravity specifies peak power handling of 200 watts total for the pair and 95 watts each. A 25 mm voice coil and 10 oz magnet are listed as part of the speaker construction. Continuous RMS power handling is not published in the confirmed product information, so amplifier matching should not be based on the peak figure alone.

The GR-1386H can be used with a compatible factory head unit or with an aftermarket audio system, provided the vehicle has suitable 5.25-inch mounting locations. Spade speaker terminals support conventional speaker-wire connections. Confirm the vehicle's mounting depth, cutout, mounting-hole pattern, and available clearance before ordering because those measurements are not published for this model.

Key Features

• 5.25-Inch Coaxial Format: Combines woofer and tweeter functions in each speaker.
• 2-Way Design: Uses a dedicated tweeter for upper-frequency reproduction.
• 4-Ohm Impedance: Matches many standard car audio speaker circuits.
• Cellulose Cone: Silver alpha cellulose cone forms the main driver.
• Rubber Surround: Moisture-resistant rubber surrounds the cone edge.
• Spade Terminals: Provides straightforward speaker-wire connection points.

Design & Installation

The GR-1386H uses an anti-resonant stamped-steel basket, a 10 oz magnet, and a 25 mm voice coil. Its main driver uses a silver alpha cellulose cone with a moisture-resistant rubber surround, while the coaxially mounted tweeter is a Neo Mylar soft-dome design. These confirmed materials and components support its compact 2-way construction.

Use these speakers only in vehicle locations designed for compatible 5.25-inch speakers, after checking physical fitment at the door, dash, rear deck, or other mounting position. Connect speaker wiring to the supplied spade terminals with correct polarity, then secure the speakers using the included screws where suitable. The package listing identifies a pair of GR-1386H speakers, speaker wire, screws, and a user manual; vehicle-specific adapters, harnesses, and mounting brackets are not confirmed as included.