Warzone WZ68PTi 6x8" Coaxial Speaker Pair

The Warzone WZ68PTi is a pair of 6x8-inch coaxial car speakers designed for replacing compatible factory speakers or building a straightforward aftermarket audio upgrade. Its 4-ohm design suits common automotive speaker applications where a 6x8-inch mounting location is available. The pair combines a woofer and tweeter in each speaker, helping simplify installation compared with separate-component speaker systems.

With a stated 160-watt RMS system rating and 480-watt maximum system rating, these speakers are intended for systems that need stronger output than basic replacement speakers. The 92dB sensitivity specification supports efficient sound production from an appropriate car-audio source or amplifier. Their stated 52Hz–20kHz frequency response covers bass, midrange, and treble ranges handled by the coaxial design.

A glass-fiber woofer cone forms the foundation of the WZ68PTi's midrange and lower-frequency reproduction. A 50mm PEI dome tweeter is mounted concentrically to handle upper frequencies, keeping both drivers aligned within the same speaker assembly. The specified 4.5kHz crossover point divides the signal between the woofer and tweeter.

The woofer uses a 15-ounce ferrite magnet, while the tweeter uses an NdFeB magnet in a circuit-driven design. These materials and the two-way layout give the speaker pair a purpose-built structure for full-range automotive listening. The speaker is specified as a coaxial model, so it can be used where a compact, all-in-one speaker solution is preferred.

Before purchase, compare the vehicle's available speaker opening and behind-panel clearance with the published cutout and mounting-depth measurements. The WZ68PTi has a 5.12 by 7.31-inch cutout requirement and a 2.36-inch mounting depth. It is a practical option for compatible 6x8-inch locations when matched with suitable wiring, mounting hardware, and power delivery.

Key Features

• 6x8-Inch Coaxial Pair: Provides two full-range speakers for compatible vehicle locations.
• Two-Way Driver Layout: Combines a woofer and dome tweeter in each speaker.
• 160W RMS System Rating: Supports use in appropriately matched aftermarket audio systems.
• Glass-Fiber Woofer Cone: Forms the speaker's primary midrange and low-frequency driver.
• 50mm PEI Dome Tweeter: Handles high-frequency detail within the coaxial assembly.
• 4.5kHz Crossover: Directs frequencies between the woofer and tweeter.

Design & Installation

The WZ68PTi uses a glass-fiber woofer cone, a 50mm PEI dome tweeter, and separate magnet systems for its woofer and tweeter sections. The woofer is specified with a 15-ounce ferrite magnet, while the tweeter uses an NdFeB magnet. Its coaxial construction places both drivers in one integrated 6x8-inch speaker assembly.

Confirm that the vehicle accepts a 6x8-inch speaker and check the 5.12 by 7.31-inch cutout, 5.79 by 8.03-inch overall dimensions, and 2.36-inch mounting depth before installation. Use vehicle-appropriate adapters or mounting hardware only if required by the application, as included accessories are not confirmed. Match the speakers to a compatible 4-ohm audio system and avoid exceeding the stated power ratings.