Warzone WZ-E682 6x8" Coaxial Car Speakers

The Warzone WZ-E682 is a pair of 6x8-inch coaxial car speakers made for upgrading compatible factory door, rear-door, or rear-deck speaker locations. Each speaker combines a woofer and an integrated tweeter in one assembly, helping add full-range sound without requiring a separate tweeter mounting position. This format is well suited to vehicle owners replacing worn factory speakers or building a straightforward aftermarket audio system.

With a 4-ohm nominal impedance, the WZ-E682 is intended for use with compatible mobile-audio equipment. The pair is rated for 325 watts RMS and 650 watts maximum power, which equals 162.5 watts RMS per speaker. Matching the speakers with appropriately powered, clean amplification is important for dependable operation.

The coaxial design is specified to reproduce frequencies from 52 Hz to 20 kHz for broad low-, mid-, and high-frequency coverage. A 2-inch PEI dome tweeter handles the upper range, with a stated 1,000 Hz to 20 kHz response and 94 dB sensitivity. The 5 kHz crossover point divides upper-frequency duties between the woofer and tweeter.

The woofer uses a 1.2-inch voice coil and a 20-ounce ferrite magnet. Its listed sensitivity is 91 dB, and its resonant frequency is 65 Hz. These published specifications describe the driver assembly used to deliver full-range playback from a compact 6x8-inch speaker format.

For system upgrades, the WZ-E682 can serve as a direct replacement where the vehicle has adequate 6x8-inch space and compatible mounting provisions. Verify the opening, mounting depth, frame clearance, terminal connection, and factory mounting pattern before installation. The package includes two speakers and two protective grilles for a complete left-and-right speaker-pair upgrade.

Key Features

• 6x8-Inch Coaxial Pair: Combines woofer and tweeter functions in each speaker.
• 325W RMS Per Pair: Supports system matching with compatible amplification.
• 4-Ohm Impedance: Works with compatible 4-ohm mobile-audio equipment.
• 2-Inch PEI Dome Tweeter: Handles high-frequency detail within the speaker assembly.
• 52 Hz–20 kHz Response: Covers a broad published full-range frequency span.
• Protective Grilles Included: Includes two grilles for the speaker pair.

Design & Installation

The WZ-E682 uses a coaxial layout that places a 2-inch PEI dome tweeter within the 6x8-inch woofer assembly. Its woofer is specified with a 1.2-inch voice coil and 20-ounce ferrite magnet, while the integrated tweeter uses a 5 kHz crossover point. This design consolidates full-range reproduction into each speaker location.

Confirm a 5.12 x 7.31-inch cutout and at least 2.64 inches of mounting depth before ordering. The overall frame measures 5.79 x 8.03 inches, with a listed height of 3.71 inches; factory brackets, mounting-hole patterns, grille clearance, and wiring connections remain vehicle dependent. Use compatible 4-ohm equipment, secure the speakers firmly, and set amplifier gain appropriately for the published RMS rating.