Rockford Fosgate GS-675 6.75" Surface-Mount Grilles

The Rockford Fosgate GS-675 is a pair of 6.75-inch surface-mount speaker grilles made for a clean, protected finish around compatible Punch V2 speakers. They provide a finished exterior over the speaker installation while helping shield the speaker from incidental contact. This accessory is intended for installations where the grille can extend above the mounting surface.

These grilles are designed specifically for Rockford Fosgate P1V2-675 and P2V2-675 6.75-inch speakers. Their model-specific fit helps align the grille assembly with the compatible speaker frame and factory speaker cutout. They are not presented as universal grilles for other speaker models or sizes.

The GS-675 is a protective and cosmetic accessory rather than an audio-producing component. It does not add power handling, change impedance, or replace the speaker itself; the installed speaker determines the system's sound character. The grille mesh allows the compatible speaker to remain covered while maintaining an open front profile.

A surface-mount layout is useful when a flush-mounted trim ring is not required and added grille height is acceptable. The assembly uses a grille bezel around the speaker and a keyed mesh grille that snaps into place after the speaker is secured. This creates a finished appearance without exposed grille-retention hardware on the front.

For a matched Punch V2 installation, the GS-675 works with the same speaker cutout used by the compatible 6.75-inch speakers. It is supplied as a pair for a left-and-right speaker installation. The mesh is removable and paintable for projects that call for a coordinated interior finish.

Key Features

• 6.75-Inch Surface Fit: Designed around compatible Rockford Fosgate 6.75-inch Punch V2 speakers.
• Model-Specific Compatibility: Fits P1V2-675 and P2V2-675 speaker models.
• Surface-Mount Assembly: Adds a finished grille assembly above the mounting panel.
• Snap-In Mesh: Keyed grille mesh snaps into the bezel after installation.
• Paintable Mesh: Removable grille mesh can be painted for custom applications.
• Pair Packaging: Includes two grille meshes and two grille bezels.

Design & Installation

The GS-675 uses Centrex and ASA plastic construction with a black finish. Each position consists of a grille bezel and removable mesh grille, with the mesh keyed for proper alignment. Its 7.55-inch outer diameter provides coverage around the compatible 6.75-inch speaker installation, while its surface-mounted height is 1.09 inches.

Use these grilles only with P1V2-675 or P2V2-675 speakers and verify clearance behind and in front of the mounting panel before cutting. The speaker is placed in the grille bezel, the assembly is secured to the panel using the speaker's supplied screws, and the grille mesh is snapped into place with the logo oriented correctly. The package includes a cutout template; for this 6.75-inch surface-mount application, the grille uses the same speaker cutout as the compatible speaker.