{"product_id":"se-electronics-se7sfp-sidefire-condenser-microphone-pair","title":"sE Electronics sE7sF(P) SideFire Condenser Microphone Pair","description":"\u003cp\u003eThe sE Electronics sE7sF(P) sE7 sideFire is a factory-matched pair of small-diaphragm condenser microphones designed for instrument recording and live sound. Its 90-degree side-address capsule layout helps solve placement challenges where a traditional end-address pencil microphone may be difficult to position. It is well suited to drums, percussion, acoustic guitar, piano, strings, woodwinds, choirs, and stereo ambience capture.\u003c\/p\u003e\u003cp\u003eEach microphone uses a cardioid pickup pattern to focus on the intended source while reducing pickup from the rear. The 1\/2-inch back-electret condenser capsule is designed for clear, balanced reproduction and fast transient response. This makes the pair practical for detailed sources such as cymbals, acoustic instruments, and percussion.\u003c\/p\u003e\u003cp\u003eThe sE7 sideFire uses discrete Class-A electronics and a transformerless output stage. Its equivalent noise level is rated at 16 dB(A), with a 78 dB signal-to-noise ratio. The resulting design is intended to capture fine detail without adding unnecessary noise in studio or stage signal chains.\u003c\/p\u003e\u003cp\u003eA switchable 20 dB attenuation pad expands the microphone's maximum SPL handling from 136 dB to 156 dB SPL. This supports close placement on loud sources such as snare drums, brass instruments, and percussion. A switchable 80 Hz low-cut filter can help reduce rumble, footfall noise, wind noise, and excessive proximity-effect bass.\u003c\/p\u003e\u003cp\u003eThe matched-pair configuration is selected for closely consistent performance, making it appropriate for stereo techniques and ambient recording. Connect each microphone to an XLR-equipped microphone preamp, mixer, or audio interface that supplies 48V phantom power. The included clips, thread adapters, and windscreens provide the basic hardware needed to mount the pair on standard microphone stands.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e90-Degree SideFire Capsule:\u003c\/strong\u003e Enables practical positioning in tight or awkward miking locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Matched Pair:\u003c\/strong\u003e Supports consistent stereo and ambient microphone techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Pickup Pattern:\u003c\/strong\u003e Focuses on the source and reduces rear pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 20 dB Pad:\u003c\/strong\u003e Accommodates high-SPL instruments and close-miking applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 Hz Low-Cut Filter:\u003c\/strong\u003e Helps reduce low-frequency rumble and excessive bass buildup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-A Transformerless Circuit:\u003c\/strong\u003e Provides a short, clean signal path for detailed capture.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe sE7 sideFire has an all-metal chassis, a gold-plated 3-pin male XLR connector, and a 90-degree rotated capsule arrangement. Each microphone measures 23 mm in diameter and 130 mm in length, with a weight of 163 g. The metal housing is designed to support durable studio and stage use while helping reject electrical interference.\u003c\/p\u003e\u003cp\u003eUse one microphone for close instrument capture or deploy both for stereo overhead, spaced-pair, or ambient applications. Each mic requires a balanced XLR connection and 48V phantom power from a compatible mixer, microphone preamp, or audio interface. Engage the 20 dB pad for very loud sources, and use the 80 Hz low-cut filter when low-frequency noise or close-placement bass buildup is a concern.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669452021830,"sku":"sE7sF(P)","price":246.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71CWQ4OW9fL.jpg?v=1784504276","url":"https:\/\/audiowatt.store\/products\/se-electronics-se7sfp-sidefire-condenser-microphone-pair","provider":"Audio Watt Store","version":"1.0","type":"link"}