{"product_id":"se-electronics-dynacaster-dcm-8-dynamic-microphone","title":"sE Electronics DYNACASTER DCM 8 Dynamic Microphone","description":"\u003cp\u003eThe sE Electronics DYNACASTER DCM 8 is a front-addressed cardioid dynamic microphone designed for broadcast-style voice capture, podcasting, livestreaming, recording, and instrument use. Its XLR-based design suits creators and musicians who use an audio interface, mixer, or microphone preamp rather than a USB microphone. The focused cardioid pickup pattern helps prioritize the source in front of the microphone while reducing pickup from the rear.\u003c\/p\u003e\u003cp\u003eFor voice work, the DCM 8 is built to provide a close, controlled presentation with onboard tools for adjusting the microphone's tonal starting point. Two recessed acoustic trim switches provide six available EQ configurations for tailoring low- and high-frequency character before software or console processing. This gives users practical adjustment options without requiring an external inline EQ for basic voicing changes.\u003c\/p\u003e\u003cp\u003eThe microphone includes sE's switchable DYNAMITE preamp, which provides an additional 30 dB of gain when engaged. The active mode requires 48V phantom power and is useful with interfaces or preamps that do not provide ample gain for a typical dynamic microphone. With the preamp switched off, the DCM 8 can be used as a conventional passive dynamic microphone.\u003c\/p\u003e\u003cp\u003eA DMC8 dynamic capsule with an aluminum voice coil and neodymium magnet supports a stated 20 Hz to 19 kHz frequency range. The microphone is front-addressed, making it well suited to boom-arm and desk-mounted setups where the speaker addresses the end of the mic. Its integrated capsule shock-absorption system is designed to reduce the need for a separate external shockmount.\u003c\/p\u003e\u003cp\u003eThe DCM 8 combines several useful recording accessories into its body, including an internal three-layer pop filter and an integrated stand mount with a wide swivel range. The internal pop filter is removable for cleaning, while an external windscreen is also supplied for users who prefer additional wind protection. Its all-metal housing, XLR output, included thread adapter, and boom-arm compatibility make it a practical fit for podcast, streaming, studio, vocal, and instrument-recording systems.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable DYNAMITE Preamp:\u003c\/strong\u003e Adds 30 dB of gain when powered by 48V phantom power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Dynamic Capsule:\u003c\/strong\u003e Focuses on the source in front of the microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix EQ Configurations:\u003c\/strong\u003e Recessed acoustic trim switches tailor low and high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Shock Absorption:\u003c\/strong\u003e Helps reduce vibration and handling-related mechanical noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Layer Pop Filter:\u003c\/strong\u003e Helps control plosives without an external pop filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Addressed XLR Design:\u003c\/strong\u003e Works with interfaces, mixers, stands, and broadcast boom arms.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DCM 8 uses an all-metal housing with a matte black finish, a gold-plated 3-pin male XLR connector, and a black external windscreen. Its front-addressed body incorporates the capsule shock-absorption system, internal pop filter, recessed control switches, and stand mount into one microphone assembly. The rear-mounted controls are recessed to help protect settings during transport and regular use.\u003c\/p\u003e\u003cp\u003eConnect the microphone to an audio interface, mixer, or microphone preamp using a balanced XLR-to-XLR microphone cable. Enable 48V phantom power only when using the DYNAMITE preamp; the active preamp mode draws 3.0 mA and requires phantom power delivered through XLR connections. Mount the microphone on a compatible stand or broadcast boom arm using its integrated mount and supplied thread adapter, then position the front of the microphone toward the speaker or sound source.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669430820934,"sku":"DYNACASTER DCM 8","price":286.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81pvDs1FtHL.jpg?v=1784502219","url":"https:\/\/audiowatt.store\/products\/se-electronics-dynacaster-dcm-8-dynamic-microphone","provider":"Audio Watt Store","version":"1.0","type":"link"}