{"product_id":"rockford-fosgate-tms69bl9813-6x9-saddlebag-speaker-kit","title":"Rockford Fosgate TMS69BL9813 6x9\" Saddlebag Speaker Kit","description":"\u003cp\u003eThe Rockford Fosgate TMS69BL9813 is a rear saddlebag-lid speaker retrofit kit for select 1998-2013 Harley-Davidson motorcycles. It adds a pair of 6x9-inch coaxial speakers to compatible factory hard saddlebags, providing a way to expand a fairing audio system without replacing the bag lids. The kit includes the cutting templates, mounting parts, grilles, and harnesses needed for the saddlebag installation.\u003c\/p\u003e\u003cp\u003eThis kit is intended for riders building a Rockford Fosgate motorcycle audio system with rear speakers. Its direct-connect harness is designed to integrate with compatible Rockford Fosgate compact-chassis Punch and Power amplifiers rather than factory Harley-Davidson amplifiers. If retaining a factory Harley-Davidson head unit, the factory radio needs to be flashed for use with this kit.\u003c\/p\u003e\u003cp\u003eEach included TMS69 speaker is a 6x9-inch, 2-way coaxial design rated for 100 watts RMS and 200 watts peak. A carbon-fiber-reinforced polypropylene cone and Santoprene VAST surround support midbass output, while the 1-inch film-dome tweeter handles high frequencies. The 4-ohm speakers have a specified frequency response of 56 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eElement Ready construction is designed for the environmental exposure associated with motorcycle use, including dust, UV light, temperature changes, water, corrosion, and vibration. The speaker assembly uses an ultra-high-temperature glass-reinforced polymer frame, while the kit uses painted stamped-steel grilles with ASA plastic frames. A sandwich-clamping gasket arrangement helps seal the speaker installation at the saddlebag lid.\u003c\/p\u003e\u003cp\u003eThe TMS69BL9813 is designed for factory Harley-Davidson hardshell saddlebag lids on specified touring motorcycles. The included cutout guides and two-piece mounting system allow the speakers to be fitted into existing lids rather than requiring pre-cut or color-matched replacement lids. Leave at least 2 inches of clearance below each speaker magnet when packing the saddlebags.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Speakers:\u003c\/strong\u003e Adds two full-range rear speakers to compatible saddlebag lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier-powered motorcycle audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Built for exposure to outdoor riding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Connect Harness:\u003c\/strong\u003e Simplifies connection to compatible Rockford Fosgate amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Templates Included:\u003c\/strong\u003e Helps position the required saddlebag-lid openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Mounting System:\u003c\/strong\u003e Secures speakers, grilles, and rings through the lids.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe included TMS69 speakers use carbon-fiber-reinforced polypropylene cones, Santoprene VAST surrounds, 1-inch film-dome tweeters, and neodymium motor structures. Their frames are made from ultra-high-temperature glass-reinforced polymer. The kit's painted stamped-steel grilles use ASA plastic frames for UV protection, and the sandwich-clamping gasket design supports an environmental seal at the lid.\u003c\/p\u003e\u003cp\u003eInstallation requires cutting the existing factory saddlebag lids with the supplied templates, then mounting the grille, mounting ring, and speaker with the included hardware. The main harness routes to a compatible Rockford Fosgate compact-chassis Punch or Power amplifier, with individual saddlebag harnesses routing inside each bag. This kit is for compatible ABS plastic factory lids; fiberglass lids are not supported, and some CVO, Screaming Eagle, Tour-Pak, and H-D Power Lock applications may require modification or may not be compatible.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45659575877702,"sku":"TMS69BL9813","price":709.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/715lYVLz0WL.jpg?v=1784445992","url":"https:\/\/audiowatt.store\/products\/rockford-fosgate-tms69bl9813-6x9-saddlebag-speaker-kit","provider":"Audio Watt Store","version":"1.0","type":"link"}