{"product_id":"rockford-fosgate-p1v2-65-6-5-3-way-coaxial-speakers","title":"Rockford Fosgate P1V2-65 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate P1V2-65 is a pair of 6.5-inch, 4-ohm 3-way coaxial car speakers designed to replace factory full-range drivers in compatible door or rear-deck locations. By integrating a midrange, inverted-dome tweeter, and piezo super tweeter into each speaker, it provides a more complete frequency range than a typical single-cone OEM speaker. It is intended for everyday vehicle audio upgrades where improved clarity and output are desired without moving to a separate component-speaker system.\u003c\/p\u003e\u003cp\u003eEach P1V2-65 speaker is rated for 75 watts RMS and 150 watts peak, with 88 dB sensitivity at 1 watt\/1 meter. Its 49 Hz to 25 kHz frequency response supports bass and midrange duties while extending into higher frequencies through the integrated tweeter array. The 4-ohm nominal impedance is suited to common aftermarket head units and compatible car-audio amplifiers.\u003c\/p\u003e\u003cp\u003eThe 3-way layout uses a 6.5-inch mica-reinforced polypropylene cone, a 3\/4-inch Tetolon inverted-dome tweeter, and a 3\/8-inch polypropylene piezo super tweeter. This arrangement is designed to add high-frequency detail while retaining the simple, single-location installation of a coaxial speaker. An internal tweeter high-pass network is specified at 9 kHz with a 6 dB-per-octave slope.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's VAST 2.0 surround architecture increases usable cone area compared with a conventional surround arrangement. The speaker also uses a Santoprene half-roll surround, linear Nomex spider, vented Kapton voice-coil former, and Y35 ferrite motor structure. These construction elements support controlled cone movement and heat management in normal vehicle-audio use.\u003c\/p\u003e\u003cp\u003eFor fitment flexibility, the P1V2-65 has a removable motor cover and an updated mounting flange. It requires a 5.67-inch cutout and has a 2.48-inch mounting depth with the motor cover installed, or 2.24 inches without it. The pair includes basic installation hardware and wiring accessories, while protective grilles are sold separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines midrange, tweeter, and piezo elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Per Speaker:\u003c\/strong\u003e Supports properly matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with common car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST 2.0 Surround:\u003c\/strong\u003e Increases available cone area for efficient air movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Frequency Network:\u003c\/strong\u003e Uses a 9 kHz tweeter high-pass crossover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Motor Cover:\u003c\/strong\u003e Reduces mounting depth for tighter installation locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1V2-65 uses a mica-reinforced polypropylene cone with a chemically bonded Santoprene surround, plus a glass-fiber-reinforced PA66 composite basket. Its overhung voice coil uses a vented Kapton former, while the Y35 ferrite motor, linear Nomex spider, stitched tinsel leads, and co-molded terminals support the speaker assembly. An integrated concealed crossover network is built into the coaxial design.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's available opening, depth, and front-side clearance with the 5.67-inch cutout, 2.48-inch mounting depth, and 0.51-inch front-side-clearance requirements. The package includes screws, a cutout template, short speaker-wire leads, crimp connectors, and spade terminals; grilles are not included. Observe terminal polarity, route wiring before mounting, and verify that door glass, locks, and other moving parts clear the speaker.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634261188678,"sku":"P1V2-65","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61qf7eVpWpL.jpg?v=1784429038","url":"https:\/\/audiowatt.store\/products\/rockford-fosgate-p1v2-65-6-5-3-way-coaxial-speakers","provider":"Audio Watt Store","version":"1.0","type":"link"}