{"product_id":"rockford-fosgate-p1s2-10-10-2-ohm-subwoofer","title":"Rockford Fosgate P1S2-10 10\" 2-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P1S2-10 is a 10-inch, single-voice-coil car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. Its 2-ohm nominal impedance and 250-watt RMS power rating make it suited to a properly matched mono amplifier. It is intended for listeners who want fuller bass than factory door speakers can reproduce.\u003c\/p\u003e\u003cp\u003eThis Punch P1 model uses a Kevlar-reinforced paper cone and dust cap to provide a rigid radiating surface for bass playback. A high-density NBR half-roll surround supports cone movement, while a poly-cotton spider is designed for resistance to tearing and fatigue. The result is a subwoofer built for controlled low-frequency reinforcement in a compact 10-inch format.\u003c\/p\u003e\u003cp\u003eThe P1S2-10 has a 2.0-inch, four-layer voice coil with a high-temperature design and a spun-laced Nomex reinforcement collar. Its vented spider cavity helps promote voice-coil cooling during operation. The motor system incorporates an extended pole piece and bumped backplate to support the woofer's excursion capability.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in either a sealed or vented enclosure, allowing the system design to be tailored to available space and bass preference. Rockford Fosgate specifies a 0.59 cubic-foot sealed enclosure as its recommended sealed alignment. For a vented build, the published alignment is 1.40 cubic feet tuned to 37.3 Hz.\u003c\/p\u003e\u003cp\u003eWith a 5.33-inch mounting depth and 9.125-inch mounting cutout diameter, the P1S2-10 should be measured against the available enclosure and vehicle clearance before installation. Its single 2-ohm voice coil presents a 2-ohm load when used by itself. Pair it with an amplifier that is stable at 2 ohms and appropriately rated for its 250-watt RMS handling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e250-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power rather than peak-only ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm SVC Design:\u003c\/strong\u003e Provides a single 2-ohm nominal load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar-Reinforced Paper Cone:\u003c\/strong\u003e Combines paper-cone character with added structural reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Spider Cavity:\u003c\/strong\u003e Helps promote cooling around the voice-coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-AWG Push Terminals:\u003c\/strong\u003e Uses insulated, nickel-plated terminals for secure speaker-wire connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatibility:\u003c\/strong\u003e Supports enclosure options for different installation goals and space constraints.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1S2-10 is constructed around a sturdy 16-gauge compound-bend frame with optimized motor magnetics, an extended pole piece, and bumped backplate. It uses a protective PVC-textured magnet cover, decorative ABS trim ring, high-density NBR half-roll surround, and a tear- and fatigue-resistant poly-cotton spider. These components support the woofer's mechanical structure and everyday car-audio use.\u003c\/p\u003e\u003cp\u003eAllow at least 5.33 inches of mounting depth behind the baffle and cut a 9.125-inch mounting opening. Rockford Fosgate recommends a 0.50 to 0.85 cubic-foot sealed enclosure range, with 0.59 cubic feet specified as the reference sealed volume; its vented recommendation is 1.40 cubic feet tuned to 37.3 Hz using one 3-inch by 8-inch port. For system setup, the manual recommends an active 80-100 Hz low-pass crossover at 12 dB per octave for subwoofer operation.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634116550726,"sku":"P1-S2-10","price":119.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61rwkgUc0OL.jpg?v=1784427994","url":"https:\/\/audiowatt.store\/products\/rockford-fosgate-p1s2-10-10-2-ohm-subwoofer","provider":"Audio Watt Store","version":"1.0","type":"link"}