{"product_id":"memphis-mjp844-mojo-pro-8-dual-4-ohm-subwoofer","title":"Memphis MJP844 MOJO Pro 8\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Memphis MJP844 is an 8-inch MOJO Pro car subwoofer built for systems that need substantial bass output from a compact driver. Its dual 4-ohm voice-coil configuration gives installers useful wiring flexibility when matching the subwoofer to a compatible amplifier. It is intended for a properly designed enclosure and an external car-audio amplifier.\u003c\/p\u003e\u003cp\u003eThis model is designed around high-SPL use, making it a practical choice for listeners who prioritize strong bass impact and system output. The 750-watt RMS rating provides the key power target for amplifier selection and gain setup. Its 1,500-watt peak rating describes short-duration power handling rather than the continuous amplifier-matching target.\u003c\/p\u003e\u003cp\u003eThe MJP844 uses a 2.5-inch voice coil with Memphis DVVC Direct Vent Voice Coil Cooling. Cross-drilled front-plate venting supports airflow around the motor structure during demanding use. An aluminum shorting ring is included to reduce inductance.\u003c\/p\u003e\u003cp\u003eIts moving assembly combines a rigid paper cone with a double-stitched foam surround and progressive spider. These components are supported by a die-cast basket designed to provide a stable mounting structure. Single-sided compression terminals provide the connection points for the dual voice coils.\u003c\/p\u003e\u003cp\u003eWith a 7.3-inch cutout requirement and 5.6-inch mounting depth, the MJP844 can be planned into custom compact bass systems where space is limited. The dual 4-ohm coils can be wired for either a 2-ohm parallel load or an 8-ohm series load. Pair it with an amplifier that is stable at the chosen final impedance and set up for approximately 750 watts RMS of clean power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching around 750 watts of continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct venting helps manage voice-coil heat under use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Voice Coil:\u003c\/strong\u003e Provides a substantial thermal platform for this compact subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone:\u003c\/strong\u003e Forms the primary diaphragm for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Basket:\u003c\/strong\u003e Provides a rigid foundation for the motor and suspension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP844 combines a rigid paper cone, double-stitched foam surround, progressive spider, die-cast basket, and 105-ounce magnet structure. Its motor includes a cross-drilled front plate, DVVC cooling, and an aluminum shorting ring. Single-sided compression terminals are used for speaker-wire connections.\u003c\/p\u003e\u003cp\u003ePlan for a 7.3-inch cutout and at least 5.6 inches of mounting depth before building or purchasing an enclosure. Wire both 4-ohm coils correctly to reach either a 2-ohm parallel or 8-ohm series final load, and verify that the amplifier supports that load. Use an external amplifier, enclosure, appropriate wiring, and careful gain adjustment for a complete installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183580230,"sku":"MJP844","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Gx1CgvY5L.jpg?v=1784410592","url":"https:\/\/audiowatt.store\/products\/memphis-mjp844-mojo-pro-8-dual-4-ohm-subwoofer","provider":"Audio Watt Store","version":"1.0","type":"link"}