{"product_id":"kenwood-kfc-1633mrw-6-5-2-way-marine-speakers","title":"Kenwood KFC-1633MRW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1633MRW is a pair of 6.5-inch, 2-way marine speakers designed for boat and watercraft audio systems. They provide a practical replacement or upgrade path for worn, low-output, or non-marine-rated factory speakers. Their 4-ohm design allows connection to compatible marine receivers or external amplifiers.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want clear full-range music reproduction in open-air marine environments. A polypropylene woofer handles the main midrange and lower-frequency duties, while the balanced-dome tweeter supports upper-frequency detail. The result is a straightforward two-way speaker design for everyday on-water listening.\u003c\/p\u003e\u003cp\u003eThe KFC-1633MRW is rated for 20 watts RMS and 100 watts peak power per speaker. Its 84 dB sensitivity and 65 Hz to 20 kHz frequency response describe a speaker suited to moderate-power marine audio systems. Match amplification to the continuous RMS rating rather than the peak-power figure when planning a system.\u003c\/p\u003e\u003cp\u003eKenwood uses a water-resistant polypropylene cone woofer in this model to support use around splashing water and marine conditions. The speaker also uses a balanced-dome tweeter and a fixed white grille. These construction details make it appropriate for installations where exposed speaker locations are common.\u003c\/p\u003e\u003cp\u003eWith a 130 mm cutout requirement and 55.9 mm mounting depth, the KFC-1633MRW can fit many standard 6.5-inch speaker locations when mounting measurements are confirmed first. It can be used as a pair on its own or combined with additional marine speakers and a compatible amplifier. The included mounting hardware and installation template help support a clean installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Two-Way Design:\u003c\/strong\u003e Combines a woofer and tweeter in each speaker for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20W RMS Power:\u003c\/strong\u003e Supports continuous operation with appropriately matched marine audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Peak Power:\u003c\/strong\u003e Handles short musical peaks within its specified maximum rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Cone:\u003c\/strong\u003e Uses a polypropylene woofer cone suited to marine speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Adds high-frequency reproduction from a 1-inch tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm marine receiver or amplifier channels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1633MRW uses a 160 mm polypropylene cone woofer, a 25 mm balanced-dome tweeter, and a 227 g magnet. Each speaker is protected by a fixed white grille. The pair has a listed net weight of 1.2 kg with grilles.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth, cutout diameter, and screw-hole layout before installation. Kenwood specifies a 130 mm cutout, 55.9 mm mounting depth, and four 4 to 4.5 mm mounting holes per speaker. Connect each speaker to a compatible amplifier or receiver output with correct polarity, and use the supplied screws and speed clips where appropriate.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141211206,"sku":"KFC-1633MRW","price":97.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/510HZvT-PbS.jpg?v=1784405478","url":"https:\/\/audiowatt.store\/products\/kenwood-kfc-1633mrw-6-5-2-way-marine-speakers","provider":"Audio Watt Store","version":"1.0","type":"link"}