{"product_id":"jbl-club-102-10-car-audio-subwoofer","title":"JBL Club 102 10\" Car Audio Subwoofer","description":"\u003cp\u003eThe JBL Club 102 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket vehicle sound system. It is a passive driver, so it requires a separate compatible subwoofer amplifier and enclosure. With 350 watts RMS power handling, it is suited to systems that need stronger bass without stepping up to a larger 12-inch driver.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners building a trunk, cargo-area, or custom enclosure installation. Its Selectable Smart Impedance (SSI™) switch lets the installer choose either a 2-ohm or 4-ohm nominal load to better match an amplifier. That flexibility can also be useful when planning future amplifier or subwoofer-system changes.\u003c\/p\u003e\u003cp\u003eThe Club 102 uses a polypropylene driver with a 2-inch voice coil, high-roll rubber surround, and double-stack magnet design. Its vented basket is designed to promote airflow around the voice coil during operation. The result is a subwoofer engineered for controlled bass reproduction and sustained use within its rated power range.\u003c\/p\u003e\u003cp\u003eJBL rates the Club 102 for a 35Hz–500Hz frequency response at -6dB and 83dB sensitivity at 1W\/1m. A sealed enclosure can support a compact, controlled installation, while a properly designed vented enclosure can emphasize output in the upper-bass region. Enclosure selection, amplifier setup, and crossover settings will strongly affect final in-vehicle performance.\u003c\/p\u003e\u003cp\u003eThe Club 102 installs from the outside of its enclosure and uses a 9-inch cutout with a 5-1\/8-inch mounting depth. An EVA foam gasket is included to help create an airtight seal between the frame and enclosure. It is a practical choice for custom systems where enclosure space, amplifier impedance, and clean installation appearance all matter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Impedance Switch:\u003c\/strong\u003e Select 2-ohm or 4-ohm operation to match a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Supports substantial continuous power in a properly configured system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Polypropylene Driver:\u003c\/strong\u003e Provides dedicated bass output for car audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Stack Magnet:\u003c\/strong\u003e Supports the driver’s power-handling and excursion-focused design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Steel Basket:\u003c\/strong\u003e Promotes airflow around the voice coil during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Supports cone travel while maintaining stable edge suspension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 102 combines a polypropylene cone with a large inverted dust cap, high-roll rubber surround, steel basket, and vented basket construction. Its trim-ring design is intended to conceal mounting hardware for a cleaner finished appearance. The included EVA foam gasket helps seal the subwoofer frame against the enclosure mounting surface.\u003c\/p\u003e\u003cp\u003eUse a compatible external amplifier rated to operate safely at the selected 2-ohm or 4-ohm setting, and turn the amplifier off before changing the SSI™ switch position. JBL specifies a 9-inch cutout and 5-1\/8-inch mounting depth; confirm clearance behind the mounting surface before installation. The terminals accept bare or tinned speaker wire, with 14 AWG to 8 AWG wire recommended depending on run length.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632266010694,"sku":"JBLSUBCB102","price":163.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61cf72_ODQL.jpg?v=1784398850","url":"https:\/\/audiowatt.store\/products\/jbl-club-102-10-car-audio-subwoofer","provider":"Audio Watt Store","version":"1.0","type":"link"}