{"product_id":"hifonics-zs5768cx-5x7-6x8-2-way-coaxial-speakers","title":"Hifonics ZS5768CX 5x7\/6x8\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hifonics ZS5768CX is a pair of 5x7\/6x8-inch two-way coaxial car speakers designed for replacing compatible factory door, rear-deck, or panel-mounted speakers. They provide a straightforward upgrade path for vehicles using this common oval speaker format. A supplied 6x8-inch adapter plate helps support installation in applicable 6x8-inch locations.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 90 watts RMS and 250 watts peak power handling at 4 ohms. With an 88 dB sensitivity rating and a 46 Hz to 20 kHz frequency response, the pair is suited to factory-radio replacement systems as well as properly matched aftermarket amplification. The coaxial layout places the tweeter within the woofer assembly to combine midrange, bass, and high-frequency reproduction in one mounting position.\u003c\/p\u003e\u003cp\u003eThe sound design combines an Alpha-Cellulose poly woofer cone with a 1-inch Neo-Mylar soft-dome tweeter. The rigid, lightweight cone is intended to support responsive midbass performance, while the soft-dome tweeter handles upper-frequency detail. A passive Butterworth crossover directs frequencies between the woofer and tweeter for a controlled transition.\u003c\/p\u003e\u003cp\u003eHifonics uses a pure-copper voice coil on a lightweight Kapton former, with an overcoil cooling arrangement that exchanges air through the spider area. The epoxy-infused natural-fiber spider is designed to balance flexibility with structural support. A ferrite magnet motor and stamped-steel basket provide the foundation for the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe ZS5768CX is a practical choice for listeners upgrading worn or limited factory speakers without moving to a separate component-speaker system. Its moisture-resistant rubber surround and high-temperature adhesive support use in typical vehicle environments. Pair it with a compatible 4-ohm factory or aftermarket audio channel, while confirming vehicle-specific mounting depth, cutout, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8-Inch Fitment:\u003c\/strong\u003e Fits the stated speaker size category and includes a 6x8-inch adapter plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates the woofer and tweeter into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports 90 watts RMS and 250 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Tweeter:\u003c\/strong\u003e A 1-inch soft-dome tweeter delivers high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Woofer Cone:\u003c\/strong\u003e Lightweight, rigid cone material supports responsive midbass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Helps transition frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThese speakers use an anti-resonant stamped-steel basket, ferrite magnet motor, pure-copper voice coil, Kapton former, and epoxy-infused natural-fiber spider. The woofer uses an Alpha-Cellulose cone with a moisture-resistant rubber surround and high-temperature adhesive. No speaker grilles are included, reflecting their intended use in many factory replacement locations where the vehicle already provides a grille.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle accepts 5x7-inch or 6x8-inch speakers and verify both the mounting cutout and depth before ordering. The listed chassis depth is 2.13 inches, and the quick-start guide lists a 4.92 x 7.09-inch cutout measurement. Use the included 6x8-inch adapter plate where appropriate, connect using the spade terminals or soldered connections, and match the speakers to a compatible 4-ohm audio channel.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631966511174,"sku":"ZS5768CX","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61MiAouC2wL.jpg?v=1784390852","url":"https:\/\/audiowatt.store\/products\/hifonics-zs5768cx-5x7-6x8-2-way-coaxial-speakers","provider":"Audio Watt Store","version":"1.0","type":"link"}