{"product_id":"hertz-sx200neo-8-2-way-spl-coaxial-speaker-set","title":"Hertz SX200NEO 8\" 2-Way SPL Coaxial Speaker Set","description":"\u003cp\u003eThe Hertz SX200NEO is an 8-inch, 2-way SPL coaxial speaker set designed for high-output vehicle audio installations. It combines a large midbass woofer and centrally mounted tweeter in one speaker assembly, simplifying installation where a coaxial format is preferred. With a 4-ohm nominal impedance and 130 watts continuous power handling, it is intended for systems that need substantial output from a compact 8-inch speaker location.\u003c\/p\u003e\u003cp\u003eThis model is suited to car, motorcycle, and powersports-style builds where exposed speaker locations may encounter sunlight, humidity, or occasional water exposure. Its pressed-paper cone receives water- and humidity-resistant treatment plus anti-UV treatment. A protective rubber gasket further supports use in installations where environmental durability is an important consideration.\u003c\/p\u003e\u003cp\u003eThe SX200NEO is voiced for sound-pressure-oriented systems, with a specified 100 Hz to 20 kHz frequency response and 100 dB sensitivity. Its 1.4-inch PEI dome tweeter is designed to extend high-frequency output while the 8-inch woofer handles the midbass and midrange range. A resettable solid-state protection circuit is integrated for the tweeter.\u003c\/p\u003e\u003cp\u003eHertz uses special N38 H neodymium magnets for both the woofer and tweeter motor assemblies. This allows the speaker to retain a relatively shallow 3.26-inch mounting depth while supporting a double-layer copper woofer voice coil wound on a polyamide former. The woofer uses a 1.5-inch voice coil, while the tweeter uses a 1.1-inch voice coil.\u003c\/p\u003e\u003cp\u003eFor system upgrades, the SX200NEO can be paired with an amplifier matched appropriately to its 4-ohm load and 130-watt continuous rating. Double Faston terminals support conventional speaker wiring and can be used for daisy-chaining multiple units. Verify mounting clearance, cutout dimensions, wiring polarity, and amplifier settings before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130W Continuous Handling:\u003c\/strong\u003e Supports amplified high-output audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNature-Proof Cone Treatment:\u003c\/strong\u003e Resists humidity, water exposure, and UV degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN38 H Neodymium Motors:\u003c\/strong\u003e Helps reduce motor size and speaker weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction with integrated protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Faston Terminals:\u003c\/strong\u003e Allow conventional wiring and speaker daisy-chaining.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SX200NEO uses a water-repellent pressed-paper cone, special N38 H neodymium woofer and tweeter magnets, a double-layer copper woofer voice coil, and a PEI dome tweeter. Its protective rubber gasket complements the cone's water-, humidity-, and UV-resistant treatments. Each speaker is specified at 1.32 kg and has an 82.8 mm mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting position accommodates the 208 mm outer diameter, 182.7 mm mounting diameter, 199 mm cutout requirement, and 82.8 mm mounting depth. Connect the speaker to a 4-ohm-compatible amplifier or head-unit channel, observing correct polarity at the Faston terminals. For higher-output systems, use an amplifier whose clean continuous output is appropriate for the speaker's 130-watt continuous rating and avoid clipping.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631860637766,"sku":"SX200NEO","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71EMsBysJGL.jpg?v=1784384560","url":"https:\/\/audiowatt.store\/products\/hertz-sx200neo-8-2-way-spl-coaxial-speaker-set","provider":"Audio Watt Store","version":"1.0","type":"link"}