{"product_id":"hertz-hcp2-compact-2-channel-ab-class-amplifier","title":"Hertz HCP2 Compact 2-Channel AB-Class Amplifier","description":"\u003cp\u003eThe Hertz HCP2 is a compact two-channel car audio amplifier designed to add dedicated power to an aftermarket or factory-based audio system. It supports stereo operation for a pair of speakers or bridged mono operation for a single compatible load. Pre-In and Speaker-In connections provide options for integrating it with a wide range of source units.\u003c\/p\u003e\u003cp\u003eFor stereo systems, the HCP2 delivers 55 watts RMS per channel into 4 ohms or 85 watts RMS per channel into 2 ohms at 1% THD. Its AB-Class amplifier stage is intended for drivers who want more controlled, externally amplified sound from front speakers, rear speakers, or component systems. The amplifier is stable down to 2 ohms per channel in stereo operation.\u003c\/p\u003e\u003cp\u003eThe HCP2 can also be configured in mono mode for a 4-ohm bridged load. In that configuration, it produces 170 watts RMS at 14.4 volts and 1% THD. This makes it suitable for a modest subwoofer channel when the connected load meets the amplifier's minimum bridged impedance requirement.\u003c\/p\u003e\u003cp\u003eHertz equips the HCP2 with balanced input circuitry to help reject electromagnetic interference at its preamplified and speaker-level inputs. Its selectable crossover section includes full-range operation, an 80 Hz high-pass filter, and a 50 to 500 Hz low-pass filter. A selectable 50 Hz bass boost offers 0, 6, or 12 dB of low-frequency adjustment.\u003c\/p\u003e\u003cp\u003eThe compact chassis measures 8.46 by 7.48 by 1.97 inches, allowing the amplifier to fit in many space-conscious vehicle installations. ART automatic remote turn-on and turn-off can operate with the Speaker-In connection, reducing the need for a separate remote signal from certain factory radios. A full-range pre-out is also provided for system expansion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel or Bridged Operation:\u003c\/strong\u003e Run a stereo speaker pair or bridge the channels for a compatible 4-ohm mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-In and Speaker-In:\u003c\/strong\u003e Connect to aftermarket RCA outputs or speaker-level outputs from many factory radios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eART Auto Turn-On:\u003c\/strong\u003e Automatically turns the amplifier on and off with a speaker-level input signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossover Section:\u003c\/strong\u003e Select full-range, 80 Hz high-pass, or 50 to 500 Hz low-pass operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Bass Boost:\u003c\/strong\u003e Adjust 50 Hz boost to 0, 6, or 12 dB for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Input Circuitry:\u003c\/strong\u003e Helps reduce electromagnetic interference entering through the audio inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCP2 uses an extruded aluminum heat sink designed to transfer heat away from its internal electronics and dissipate it through the amplifier's sides. Its compact 1.97-inch-high enclosure weighs 3.96 pounds and is sized for installations where amplifier space is limited. The amplifier includes a 20-amp onboard fuse requirement and operates from an 11 to 15 VDC vehicle electrical system.\u003c\/p\u003e\u003cp\u003eInstall the HCP2 securely with clearance around the chassis for heat dissipation, then connect the source through either Pre-In or Speaker-In. Use stereo speaker wiring with loads no lower than 2 ohms per channel, or use a single 4-ohm load when bridging the amplifier. Set the crossover, gain sensitivity, mono switch, and bass boost according to the speakers or subwoofer being powered.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631731695686,"sku":"HCP2","price":298.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61E90G6f43L.jpg?v=1784380754","url":"https:\/\/audiowatt.store\/products\/hertz-hcp2-compact-2-channel-ab-class-amplifier","provider":"Audio Watt Store","version":"1.0","type":"link"}