{"product_id":"audison-avk6sii-6-5-2-way-component-speaker-kit","title":"Audison AVK6SII 6.5\" 2-Way Component Speaker Kit","description":"\u003cp\u003eThe Audison AVK6SII is a 6.5-inch, 2-way component speaker kit designed for a front-stage car audio upgrade. It pairs separate AV 6.5 S II mid-bass woofers with AV 1.0 II tweeters and dedicated passive crossover networks. The separate-driver layout allows the tweeters to be positioned higher in the cabin while the woofers fit typical door or kick-panel locations.\u003c\/p\u003e\u003cp\u003eThis kit is intended for listeners who want more controlled mid-bass, clearer vocals, and extended treble than a coaxial or factory speaker arrangement can typically provide. The 6.5-inch woofers are rated for 125 watts continuous power each and use a 36 mm CCAW voice coil. Their 50 Hz to 5.5 kHz operating range supports use as the mid-bass foundation of a two-way front stage.\u003c\/p\u003e\u003cp\u003eThe AV 1.0 II tweeters use 25.4 mm Tetolon fiber domes and are Hi-Res Audio certified with response specified to 40 kHz. Their compact form and supplied mounting hardware support flush, angled, and surface-oriented placement choices. This can be useful where factory sail panels, A-pillars, or custom tweeter locations place the listener off-axis.\u003c\/p\u003e\u003cp\u003eAudison separates the passive networks into an AVCX 2 W low-pass crossover for each woofer and an AVCX 2 T high-pass crossover for each tweeter. The woofer section uses a 6 dB\/octave low-pass network, while the tweeter section uses a 12 dB\/octave high-pass network. The crossover system is set around 3.5 kHz with the woofer Mid-Contour control off, and it provides adjustments for tweeter output and woofer mid-contour response.\u003c\/p\u003e\u003cp\u003eThe AVK6SII is suitable for a passive two-channel installation or for a system planned around bi-amplification. It includes plug-and-play speaker pigtails alongside standard speaker terminals, which can simplify serviceability and vehicle integration. For an active DSP-based installation, Audison specifies a 3 kHz, 24 dB\/octave high-pass point for the AV 1.0 II tweeter and a 70 Hz, 24 dB\/octave high-pass point for the AV 6.5 S II woofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support more flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125 W Continuous Woofer Rating:\u003c\/strong\u003e Supports matching with appropriately powered external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res AV 1.0 II Tweeters:\u003c\/strong\u003e Extends high-frequency response to a specified 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Woofer Voice Coil:\u003c\/strong\u003e A 36 mm coil supports excursion and thermal handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Dedicated woofer and tweeter networks simplify component placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Response Controls:\u003c\/strong\u003e Adjust tweeter level and woofer mid-contour for the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 S II woofer combines a pressed paper cone, butyl rubber surround, die-cast aluminum basket, and high-density-flux ferrite magnet assembly. Its motor includes an aluminum shorting ring to reduce inductance, while the 36 mm copper-clad aluminum voice coil is paired with a compact 61 mm mounting-depth specification. The AV 1.0 II uses a Tetolon fiber dome and AIF faceplate system with four supplied faceplates.\u003c\/p\u003e\u003cp\u003eConfirm available door clearance and the required 140.8 mm woofer mounting opening before installation; the woofer has a 165 mm outside diameter and 61 mm mounting depth. Install each AVCX 2 W and AVCX 2 T crossover in a dry, secure location and follow the labeled wiring layout for passive or bi-amplified operation. The kit includes mounting options for the tweeters, plus OEM-style two-pin pigtails that may be soldered or crimped to vehicle wiring.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242234438,"sku":"AVK6SII","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ql6H74ILL.jpg?v=1784363782","url":"https:\/\/audiowatt.store\/products\/audison-avk6sii-6-5-2-way-component-speaker-kit","provider":"Audio Watt Store","version":"1.0","type":"link"}