{"title":"Viper","description":null,"products":[{"product_id":"directed-508d-dual-zone-field-disturbance-sensor","title":"Directed 508D Dual-Zone Field Disturbance Sensor","description":"\u003cp\u003eThe Directed 508D is a dual-zone field disturbance sensor designed to add proximity and interior-intrusion detection to a compatible vehicle security system. It creates adjustable sensing fields that react to moving high-density objects near and within the protected area. This makes it a practical security accessory for vehicles where conventional door and shock triggers do not provide perimeter coverage.\u003c\/p\u003e\u003cp\u003eThe 508D is especially suited to convertibles, removable-top vehicles, and other applications where open-cabin protection is useful. Its outer field can provide a pre-warning response before an object reaches the inner protected field. The inner field is intended to activate a connected system's full alarm response when intrusion is detected closer to or inside the vehicle.\u003c\/p\u003e\u003cp\u003eDetection is based on RF field-disturbance technology operating at 2.4 GHz rather than ultrasonic sensing. The sensor responds to movement by high-density objects and is designed not to react to wind or rain. Its field can extend through upholstery, glass, plastic, and wood, while metal blocks the field.\u003c\/p\u003e\u003cp\u003eSeparate negative-trigger outputs support two stages of security-system response. The green wire provides a short pre-warning output for the outer field, while the blue wire provides a longer full-alarm output for the inner field. Built-in status LEDs indicate which field has detected motion during setup and testing.\u003c\/p\u003e\u003cp\u003eThe 508D fits into an alarm upgrade path for compatible Directed systems and other security systems able to accept appropriate trigger connections. It can interface with a Directed system that offers a multiplex input for perimeter-intrusion response, or with an optional 516U Vocalarm module. Field size is adjustable, allowing the installer to tune coverage for the vehicle and installation location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Zone Detection:\u003c\/strong\u003e Provides separate outer warning and inner alarm sensing areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.4 GHz RF Technology:\u003c\/strong\u003e Detects moving high-density objects using field disturbance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible-Friendly Coverage:\u003c\/strong\u003e Adds protection where open-cabin security is needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Fields:\u003c\/strong\u003e Lets the installer tailor outer and inner coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Trigger Outputs:\u003c\/strong\u003e Supports pre-warning and full-alarm system responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LEDs:\u003c\/strong\u003e Green and red indicators assist with adjustment and testing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 508D uses a compact wired sensor module with separate power, ground, pre-warning, and full-alarm connections. Its RF sensing field is designed to pass through common non-metal cabin materials, including upholstery, glass, plastic, and wood, but is blocked by metal. The unit can be mounted directly to metal when required.\u003c\/p\u003e\u003cp\u003eMount the sensor along the vehicle centerline, commonly beneath a center console or armrest, while keeping its adjustment controls accessible. Connect red to constant +12V, connect black to ground or an armed-output ground as appropriate, and connect the green and blue negative-trigger outputs to the compatible security system. Adjust the combined outer\/inner field first, then adjust the inner field; the sensor has a 10-second activation delay after power is applied.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45633310195782,"sku":"508D","price":86.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61V7IcIBeyL.jpg?v=1784420443"},{"product_id":"viper-3103v-1-way-vehicle-security-system","title":"Viper 3103V 1-Way Vehicle Security System","description":"\u003cp\u003eThe Viper 3103V is a 1-way vehicle security system designed to add remote-controlled arming, door-lock control, impact detection, and audible alarm response to a compatible vehicle. It is suited to drivers who want a dedicated aftermarket alarm without remote-start functionality. Two compact 2-button remotes provide direct control of the core security and convenience functions.\u003c\/p\u003e\u003cp\u003eThe system combines an onboard shock sensor with door, ignition, and optional connected trigger inputs to monitor the vehicle while armed. Light impacts produce a Warn Away response, while heavier impacts can trigger the full alarm response. A six-tone siren, flashing parking lights, and optional horn output provide noticeable vehicle-status and alarm indication.\u003c\/p\u003e\u003cp\u003eIts security character is focused on clear, practical deterrence rather than two-way remote confirmation. The system supports a six-tone siren sequence and can be configured for Real Panic Sound horn output when enabled by the installer. The included remotes have up to a 1\/4-mile stated operating range, although actual range varies with surroundings and radio interference.\u003c\/p\u003e\u003cp\u003eViper equips the 3103V with an onboard Stinger DoubleGuard shock sensor and Failsafe Starter Kill capability. The starter-interrupt circuit is intended to help prevent unauthorized starting when properly installed. Code-hopping remote technology and 66-bit encryption are also used to help protect remote commands from code grabbing.\u003c\/p\u003e\u003cp\u003eThe 3103V works well as a foundational security upgrade for vehicles that need aftermarket keyless entry, alarm coverage, or remote trunk-release capability. Its two auxiliary outputs can be integrated with compatible optional vehicle functions such as trunk release or another convenience accessory. Professional installation is strongly recommended because vehicle-specific interfaces, relays, and labor may be required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 1-Way Remotes:\u003c\/strong\u003e Includes two 2-button 7122V transmitters for everyday arm, disarm, and auxiliary control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Shock Sensor:\u003c\/strong\u003e Detects light and heavy impacts for graduated Warn Away and full-alarm responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFailsafe Starter Kill:\u003c\/strong\u003e Provides a starter-interrupt circuit when installed in the vehicle's starter circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Tone Siren:\u003c\/strong\u003e Delivers an audible alarm response with flashing parking-light indication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Keyless Entry:\u003c\/strong\u003e Controls compatible power door locks through the system's lock and unlock outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Auxiliary Outputs:\u003c\/strong\u003e Supports compatible optional functions such as trunk release or another convenience feature.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 3103V uses a dedicated control module with an onboard adjustable shock sensor, an integrated starter-kill relay, a status-LED connection, and a valet-button connection. Its two-button remotes use an internal transmitting antenna and transmit LED, keeping routine operation simple. The system also includes selectable positive or negative parking-light output capability and low-current control outputs for compatible vehicle circuits.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended because the system must be integrated with the vehicle's constant-power, ignition, ground, door-trigger, parking-light, siren, starter, and optional lock or auxiliary circuits. Low-current outputs must not be connected directly to motors or other high-current circuits without an appropriate relay. For best results, have the installer verify vehicle compatibility, set shock-sensor sensitivity, connect door-lock interfaces where applicable, and test every protected zone after installation.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45665431912518,"sku":"3103V","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/418014yX7-L.jpg?v=1784450406"},{"product_id":"viper-3105v-1-way-car-alarm-and-keyless-entry","title":"Viper 3105V 1-Way Car Alarm and Keyless Entry","description":"\u003cp\u003eThe Viper 3105V is a 1-way vehicle security and keyless-entry system designed to add remote-controlled protection to compatible vehicles. It combines arming, disarming, panic operation, door-lock control, and alarm responses in one system. This is a practical choice for drivers who want a traditional security upgrade without a two-way remote display.\u003c\/p\u003e\u003cp\u003eThe system uses two included four-button remotes for everyday lock, unlock, panic, and auxiliary-channel commands. Its one-way design sends commands from the transmitter to the vehicle, while the vehicle communicates status through siren chirps, parking-light flashes, and the status LED. A Revenger soft-chirp siren provides audible confirmation with a six-tone response character.\u003c\/p\u003e\u003cp\u003eFor security coverage, the 3105V includes an onboard dual-stage shock sensor, door-trigger inputs, an instant-trigger input, and ignition monitoring. The system can provide warning and full-alarm responses depending on the trigger source and programming. Its FailSafe starter-disable circuit is intended to help prevent unauthorized starting when properly installed.\u003c\/p\u003e\u003cp\u003eThe Viper 3105V is suited to vehicles needing security and keyless-entry functions where factory equipment is limited or where an existing system requires replacement. Auxiliary outputs can be configured for supported relay-driven functions such as trunk release or other accessories. An optional external sensor can also be added through the dedicated sensor harness connection.\u003c\/p\u003e\u003cp\u003eThis alarm can serve as a foundation for a larger vehicle-security installation. Its wiring includes door-lock outputs, parking-light control, dome-light supervision, and programmable auxiliary channels for integration with compatible vehicle circuits. Professional installation is recommended because correct vehicle-specific wiring, relay use, and sensor adjustment are essential to safe operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Way Remote Control:\u003c\/strong\u003e Included remotes send lock, unlock, panic, and auxiliary commands to the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Channel Design:\u003c\/strong\u003e Supports security operation plus two programmable auxiliary-channel outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFailSafe Starter Disable:\u003c\/strong\u003e Helps interrupt the starter circuit when the armed system is properly installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Stage Shock Sensor:\u003c\/strong\u003e Built-in adjustable sensor can provide warning and full-trigger responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevenger Soft-Chirp Siren:\u003c\/strong\u003e Six-tone siren provides audible arm, disarm, and alarm confirmation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyless Entry Outputs:\u003c\/strong\u003e Low-current lock and unlock outputs integrate with compatible power-door-lock circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system centers on a compact control module with an integrated adjustable dual-stage shock sensor. A separate windshield-mounted Control Center combines the antenna, status LED, and valet\/program button for a clean, centralized installation. The included siren, harnesses, remotes, and control-center cable support a complete basic security-system installation.\u003c\/p\u003e\u003cp\u003eInstallation requires vehicle-specific connections for constant power, ignition, ground, siren, door triggers, parking lights, and door locks. Low-current outputs must drive relays or compatible low-current inputs rather than motors or solenoids directly. Mount the Control Center high on the windshield with its cable fully extended for remote range, and have the system installed by a trained professional.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666030551110,"sku":"3105V","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/8132Nr4G26L.jpg?v=1784450733"},{"product_id":"viper-3108v-1-way-vehicle-security-system","title":"Viper 3108V 1-Way Vehicle Security System","description":"\u003cp\u003eThe Viper 3108V is a 1-way vehicle security and keyless-entry system designed to add alarm protection and remote convenience functions to a compatible vehicle. It combines remote arming and disarming, impact detection, a siren, and flashing parking-light confirmation. With two included 4-button transmitters, it provides control from up to 1\/4 mile away under suitable conditions.\u003c\/p\u003e\u003cp\u003eThis system is suited to drivers seeking an aftermarket security upgrade with remote door-lock control and auxiliary-output capability. The 1-way remotes send commands to the vehicle but do not provide confirmation back to the transmitter. Vehicle-specific integration, including door locks and starter interrupt operation, depends on professional installation and the vehicle's wiring.\u003c\/p\u003e\u003cp\u003eIts security response is built around a dual-stage, adjustable shock sensor housed in the control module. Light impacts can produce a Warn Away response, while heavier impacts can trigger a full alarm response. The included six-tone siren and flashing parking-light output provide audible and visual indication when the system is armed, disarmed, or triggered.\u003c\/p\u003e\u003cp\u003eThe 3108V uses Code Hopping technology, which changes the remote-control code during communication for added transmission security. Its Control Center combines the in-vehicle antenna, status LED, and Valet button in one assembly. The module also includes programmable settings for functions such as active or passive arming, lock pulse duration, siren duration, and auxiliary-channel behavior.\u003c\/p\u003e\u003cp\u003eFor a more integrated vehicle upgrade, the system supports remote keyless entry, ignition-controlled door locks when connected, and two auxiliary outputs for compatible relay-driven functions. A pre-wired starter-kill relay is included for installations that use starter interruption. The system is also compatible with the optional Viper SmartStart Pro module for smartphone-based control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 1-Way Remotes:\u003c\/strong\u003e Includes two 4-button transmitters for arming, disarming, panic, and auxiliary commands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1\/4-Mile Range:\u003c\/strong\u003e Provides remote control from up to approximately 1,500 feet under suitable conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Stage Shock Sensor:\u003c\/strong\u003e Detects lighter impacts for warning response and heavier impacts for full alarm triggering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Tone Siren:\u003c\/strong\u003e Included 514N siren supplies audible alarm and confirmation chirps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Interrupt:\u003c\/strong\u003e Pre-wired starter-kill relay supports compatible starter-disable installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartStart Pro Ready:\u003c\/strong\u003e Supports an optional module for smartphone-based vehicle security control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system centers on a compact control module with an integrated, adjustable dual-stage shock sensor. Its separate Control Center incorporates the RF antenna, status LED, and Valet\/Program button, helping keep important controls accessible to the driver. The included siren, harnesses, remote controls, and starter-kill relay support a complete security-system installation.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended because the system requires connections to vehicle power, ignition, ground, door triggers, parking lights, siren wiring, and optional door-lock or auxiliary circuits. The Control Center is typically mounted high on the windshield with its supplied adhesive, while the module should be secured to a large wiring loom rather than firmly mounted to metal. Use relays when connecting the system's low-current outputs to motors or other high-current circuits.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666112929862,"sku":"3108V","price":159.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71sHk2icsTL.jpg?v=1784450783"},{"product_id":"viper-3308v-lcd-2-way-vehicle-security-system","title":"Viper 3308V LCD 2-Way Vehicle Security System","description":"\u003cp\u003eThe Viper 3308V is a two-way vehicle security system designed to add remote-controlled protection, status confirmation, and convenience functions to a compatible vehicle. Its LCD two-way transmitter confirms commands and can report alarm activity back to the user. A second one-way four-button transmitter provides straightforward everyday control.\u003c\/p\u003e\u003cp\u003eThis system is intended for drivers who want an added layer of monitoring beyond a factory key fob. It supports arming and disarming, panic operation, flashing parking-light confirmation, and remote keyless-entry functions when the vehicle is properly connected. The included impact sensor responds differently to lighter and heavier impacts for graduated alert behavior.\u003c\/p\u003e\u003cp\u003eThe 3308V's two-way communication is centered on clear feedback rather than audio performance. The LCD remote displays vehicle and security-status icons, while its notification settings can use audible beeps and\/or vibration. Listed operating range is up to 1\/4 mile, though actual range can vary with the installation environment and surrounding interference.\u003c\/p\u003e\u003cp\u003eSecurity hardware includes a six-tone siren, Real Panic Sound horn-honk capability, an impact sensor, and starter-interrupt support. The system can also use vehicle door, ignition, trunk, hood, and optional-sensor inputs when those circuits or accessories are installed. Nuisance Prevention Circuitry helps limit repeated alarm cycles from the same triggering source.\u003c\/p\u003e\u003cp\u003eFor system expansion, the 3308V provides two auxiliary outputs for compatible convenience functions such as trunk release or window automation when properly installed. It is also compatible with the Viper SmartStart Pro platform, with the compatible VSM550 SmartStart Pro 4G LTE GPS module offered separately. Professional installation is required to integrate the system correctly with vehicle-specific wiring, locks, lighting, and security circuits.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way LCD Remote:\u003c\/strong\u003e Confirms received commands and reports alarm-status information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1\/4-Mile Range:\u003c\/strong\u003e Provides remote operation from a stated distance of up to one-quarter mile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Sensor:\u003c\/strong\u003e Detects lighter impacts for Warn Away and heavier impacts for a full alarm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Tone Siren:\u003c\/strong\u003e Supplies distinctive audible alarm and confirmation tones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Interrupt:\u003c\/strong\u003e Supports prevention of unauthorized engine starting when properly installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Auxiliary Outputs:\u003c\/strong\u003e Enables compatible add-on functions such as trunk release or convenience accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system combines a concealed control module with a windshield-mounted Control Center that integrates the in-vehicle antenna, status LED, and Valet button. The primary two-way remote uses an LCD status display, internal antenna, programmable response settings, and a replaceable CR2450 battery. The companion one-way remote uses an internal antenna, transmit LED, and four command buttons.\u003c\/p\u003e\u003cp\u003eThis product is intended for professional installation only. A qualified installer should verify vehicle compatibility and connect the security, door-lock, parking-light, siren, trigger, and optional auxiliary circuits as applicable; features such as trunk release, starter interrupt, and door locking require the appropriate vehicle connections and, in some cases, additional parts or labor.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666211594310,"sku":"3308V","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ZCHGqyEBL.jpg?v=1784450830"},{"product_id":"viper-5305v-2-way-lcd-car-alarm-and-remote-start-system","title":"Viper 5305V 2-Way LCD Car Alarm and Remote Start System","description":"\u003cp\u003eThe Viper 5305V is a vehicle security, keyless-entry, and remote-start system designed to add everyday convenience and monitored alarm functions to compatible automatic-transmission vehicles. Its two-way LCD remote provides command confirmation and vehicle-status feedback, helping the driver know whether a lock, unlock, alarm, or remote-start command was received. A companion one-way remote is also included for straightforward secondary control.\u003c\/p\u003e\u003cp\u003eRemote start can warm or cool a parked vehicle when its factory climate settings have been left in the desired position. The system offers a stated operating range of up to 1\/4 mile under suitable conditions and includes programmable remote-start runtime options. It is intended for fuel-injected automatic-transmission applications, with vehicle-specific integration requirements determined during installation.\u003c\/p\u003e\u003cp\u003eFor security coverage, the 5305V combines a Stinger DoubleGuard shock sensor, Failsafe Starter Kill capability, a status LED, and a Revenger six-tone siren. The adjustable shock sensor provides a lighter Warn Away response for minor impacts and a full alarm response for stronger impacts. The LCD remote can report command responses and alarm-related status through its on-screen icons.\u003c\/p\u003e\u003cp\u003eThe system uses 66-bit remote-code encryption and supports up to four vehicles from the included LCD transmitter when additional compatible systems are programmed. Four auxiliary outputs provide pathways for supported vehicle functions such as trunk release, rear hatch control, lighting, or other convenience features. Actual auxiliary functions depend on the vehicle, wiring, and any required interfaces or relays.\u003c\/p\u003e\u003cp\u003eThe 5305V is suited to drivers building a professionally integrated security and remote-start upgrade rather than a simple plug-in accessory. Its separate ESP2 and D2D connections support compatible Directed\/XpressKit vehicle interfaces, while Viper SmartStart compatibility allows an optional smartphone-control upgrade. The included control center combines the RF antenna, status LED, and valet\/emergency-override control in one installation component.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way LCD Remote:\u003c\/strong\u003e Confirms supported commands and displays vehicle-status feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1\/4-Mile Range:\u003c\/strong\u003e Provides remote operation from a stated maximum range under suitable conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Start:\u003c\/strong\u003e Starts compatible automatic-transmission vehicles for a programmable runtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoubleGuard Shock Sensor:\u003c\/strong\u003e Supports Warn Away and full-alarm impact responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Auxiliary Outputs:\u003c\/strong\u003e Enables compatible add-on convenience functions with proper integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartStart Compatibility:\u003c\/strong\u003e Supports an optional Viper smartphone-control module.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system centers on a compact control module with an integrated starter-kill relay, onboard remote-start relays, and separate ESP2 and D2D ports. Its package includes a 514LN six-tone soft-chirp siren, a DoubleGuard shock sensor, a windshield-mounted control center\/antenna, status LED, transmitters, and installation harnesses. The LCD transmitter uses a backlit display and dedicated command controls, while the companion transmitter provides one-way operation.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended because remote-start and security integration varies substantially by vehicle. Mount the control center high on the front windshield using its supplied adhesive, and use the included shutdown switch and pin switch as directed by the installation documentation. Some vehicles may require a data interface, bypass module, additional relays, or vehicle-specific programming to retain factory functions and enable remote start correctly.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666330148934,"sku":"5305V","price":199.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/718zCMoRQxL.jpg?v=1784450883"},{"product_id":"viper-5308v-2-way-lcd-remote-start-security-system","title":"Viper 5308V 2-Way LCD Remote Start \u0026 Security System","description":"\u003cp\u003eThe Viper 5308V is a vehicle security and remote start system built for drivers who want everyday convenience alongside monitored alarm protection. Its included 2-way LCD transmitter sends commands and receives confirmation or alarm-status pages, while a separate 1-way transmitter provides straightforward four-button control. The system can remotely start a compatible vehicle from up to 1\/4 mile away when professionally installed.\u003c\/p\u003e\u003cp\u003eThis system is suited to owners who want to warm or cool a parked vehicle before getting in while adding remote locking, unlocking, and alarm functions. The LCD remote displays system status information, including remote-start, alarm, sensor, door, hood or trunk, and battery-status indicators. Audible and vibration notification settings can be adjusted on the 2-way transmitter.\u003c\/p\u003e\u003cp\u003eSecurity coverage includes the supplied impact sensor, which provides a Warn Away response to lighter impacts and a full alarm response to heavier impacts. The system also supports door, ignition, trunk or hood trigger monitoring when those vehicle connections are installed. A six-tone siren, flashing parking-light output, panic mode, and optional starter interrupt support a more complete vehicle-security setup.\u003c\/p\u003e\u003cp\u003eThe 5308V uses command-confirming two-way communication so the LCD transmitter can page back after receiving a command or when an alarm event occurs. Its remote-start operation supports gasoline and diesel starting sequences, with programmable runtime options of 12, 24, or 60 minutes. Timer mode can be configured to start at three-hour intervals, and temperature mode can check for a 0°F threshold every three hours.\u003c\/p\u003e\u003cp\u003eFor expanded control, the 5308V is compatible with the Viper SmartStart Pro platform when the separate compatible module is added. It also provides auxiliary outputs for installer-configured convenience functions such as trunk release or other supported accessories. Professional installation by an authorized dealer is required because compatibility and available functions depend on the vehicle and its wiring interfaces.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way LCD Confirmation:\u003c\/strong\u003e The included LCD transmitter confirms commands and reports system-status pages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1\/4-Mile Range:\u003c\/strong\u003e Start, arm, disarm, and control supported functions from a distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Sensor:\u003c\/strong\u003e Provides Warn Away and full-alarm responses for lighter or heavier impacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Start:\u003c\/strong\u003e Starts a compatible fuel-injected vehicle for a programmed runtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyless Entry Integration:\u003c\/strong\u003e Locks and unlocks connected factory power door locks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartStart Pro Ready:\u003c\/strong\u003e Supports optional Viper SmartStart Pro cellular\/GPS expansion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 5308V combines an in-vehicle control system with a windshield-mounted Control Center, a 2-way LCD remote, and a 1-way transmitter. The Control Center incorporates the system antenna, a status LED, and a Control\/Valet button. The LCD transmitter uses an internal antenna, display, programming button, command buttons, and a replaceable CR2450 battery.\u003c\/p\u003e\u003cp\u003eInstallation should be completed by an authorized dealer because remote-start and security integration require vehicle-specific wiring and programming. Confirm vehicle compatibility before purchase, especially for factory immobilizer, door-lock, trunk, hood, diesel, and climate-control interfaces. Set the parking brake, leave the vehicle in Park or Neutral, and never use remote start in an enclosed or poorly ventilated space.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666445066310,"sku":"5308V","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61kbTasyfoL.jpg?v=1784450927"},{"product_id":"viper-5706v-2-way-security-and-remote-start-system","title":"Viper 5706V 2-Way Security and Remote Start System","description":"\u003cp\u003eThe Viper 5706V is a two-way vehicle security and remote start system designed to combine alarm functions, keyless-entry control, and remote engine starting in one installed package. It is intended for drivers who want confirmation that a command was received rather than relying only on a one-way transmitter. Its LCD remote can report system status while supporting daily arm, disarm, trunk, and remote-start functions.\u003c\/p\u003e\u003cp\u003eThis system uses a 4-channel security platform with door and trunk trigger inputs to monitor key vehicle access points. A shock sensor provides impact detection, with adjustable sensitivity for tailoring the response to the vehicle and installation environment. The system can also provide siren, parking-light, horn-honk, and starter-control connections when professionally integrated.\u003c\/p\u003e\u003cp\u003eIts communication approach centers on a two-way Responder LC remote, which displays status icons and text confirmations for system, siren, alarm-zone, and remote-start activity. The remote can show clock, runtime, or temperature information during remote start when configured. A companion one-way remote provides a straightforward secondary controller for another driver or as a backup.\u003c\/p\u003e\u003cp\u003eThe 5706V supports remote starting through a heavy-gauge ignition, accessory, and starter wiring harness. It offers tachometer learning and Virtual Tach capability for engine-start monitoring, with dedicated brake, hood, neutral-safety, and diesel wait-to-start inputs. These safeguards and vehicle-specific connections make correct setup important for dependable operation.\u003c\/p\u003e\u003cp\u003eFor a complete security upgrade, the system can be integrated with compatible door locks, trunk release, factory-alarm arm\/disarm circuits, and an external Xpresskit interface through its D2D port. Its Control Center combines the in-vehicle antenna, status LED, and valet\/control button at the windshield. Professional installation is recommended because compatibility, bypass requirements, and wiring methods vary by vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way LCD Remote:\u003c\/strong\u003e Displays command confirmations and key system-status information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Mile Range:\u003c\/strong\u003e Provides extended operating distance under suitable conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Start Capability:\u003c\/strong\u003e Starts or stops the engine from the remote.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Channel Security:\u003c\/strong\u003e Supports door and trunk trigger monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Shock Sensor:\u003c\/strong\u003e Lets an installer tailor impact-detection sensitivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompanion One-Way Remote:\u003c\/strong\u003e Adds a second five-button control option.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 5706V is a vehicle-integrated electronic security system built around a central control module, separate Control Center, remote transmitters, harnesses, and sensor connections. The manufacturer documentation does not publish enclosure-material specifications. Its Control Center design places the two-way antenna, status LED, and valet\/control button together for accessible operation and visible status indication.\u003c\/p\u003e\u003cp\u003eInstallation requires connection to the vehicle's power, ground, ignition, accessory, starter, brake, hood, door, and related circuits as applicable. The Control Center is typically mounted at the upper windshield, while the main module and wiring are installed inside the vehicle. A compatible vehicle interface or bypass module may be needed for certain vehicles, and the manufacturer specifies professional installation for this product.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666560245830,"sku":"5706V","price":259.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71sjYanI-5L.jpg?v=1784450983"},{"product_id":"viper-5808v-2-way-led-remote-start-security-system","title":"Viper 5808V 2-Way LED Remote Start \u0026 Security System","description":"\u003cp\u003eThe Viper 5808V is a vehicle security and remote-start system designed to add everyday convenience while helping protect a parked vehicle. Its included 2-way LED remote confirms system commands, while the companion 1-way remote provides straightforward control. The system supports remote start, arming, disarming, keyless-entry functions, panic activation, and auxiliary-channel control when properly installed.\u003c\/p\u003e\u003cp\u003eThis system suits drivers who want remote vehicle control along with security functions in one installed package. The 2-way transmitter provides LED and audible confirmations for supported commands and system messages, helping the user know whether a command was received. Viper rates the system for up to a 1-mile operating range.\u003c\/p\u003e\u003cp\u003eSecurity operation combines an impact sensor, six-tone siren, flashing parking-light output, and starter interrupt. The shock sensor distinguishes minor impacts from major impacts, allowing a Warn Away response for lighter disturbances and a full alarm trigger for more serious events. Point-of-entry monitoring can also be configured during installation for supported vehicle connections.\u003c\/p\u003e\u003cp\u003eFor daily use, the 5808V can control compatible power door-lock functions during arming and disarming. It also provides four auxiliary outputs that an installer can configure for compatible vehicle conveniences such as trunk release, powered hatch control, windows, or other supported accessories. Actual functions depend on the vehicle, connected hardware, and installer programming.\u003c\/p\u003e\u003cp\u003eThe 5808V can be expanded with the optional Viper SmartStart Pro VSM550 4G LTE GPS module for app-based connectivity. Its remote-start and security functions are intended for professionally integrated vehicle systems rather than plug-in use. This makes it a practical upgrade path for vehicles that need an aftermarket remote-start and alarm solution with future SmartStart Pro compatibility.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way LED Remote:\u003c\/strong\u003e Delivers command confirmations and supported system alerts through LEDs and tones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1-Mile Range:\u003c\/strong\u003e Provides long-distance remote control under suitable operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Start:\u003c\/strong\u003e Starts or stops a properly installed compatible vehicle remotely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Security Functions:\u003c\/strong\u003e Includes impact sensing, starter interrupt, parking-light flash, and a six-tone siren.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyless Entry And AUX Control:\u003c\/strong\u003e Supports door-lock control plus four installer-configurable auxiliary outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartStart Pro Compatible:\u003c\/strong\u003e Works with the optional VSM550 SmartStart Pro 4G LTE GPS module.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system uses a compact 2-way LED command-confirming transmitter, a 1-way 5-button transmitter, and an in-vehicle control center. The control center incorporates the system antenna, status LED, and valet\/control button. The 2-way remote has an internal antenna, LED confirmation indicators, command buttons, function button, and USB charging port.\u003c\/p\u003e\u003cp\u003eProfessional installation by an authorized dealer is required because vehicle wiring, remote-start safety circuits, door locks, alarm zones, and optional features vary by vehicle. The control center is typically installed at the upper portion of the front windshield, while the main system and wiring are integrated behind vehicle trim. Additional modules, parts, programming, and labor may be required depending on the vehicle and desired functions.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666693251142,"sku":"5808V","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61CsK95Ma0L.jpg?v=1784451042"},{"product_id":"viper-5908v-2-way-lcd-remote-start-security-system","title":"Viper 5908V 2-Way LCD Remote Start \u0026 Security System","description":"\u003cp\u003eThe Viper 5908V is a vehicle security and remote-start system designed to add two-way control, remote engine starting, and alarm protection to a professionally installed vehicle electronics system. Its color LCD transmitter provides command confirmation and system-status feedback, helping the driver know whether a command was received. A companion one-way five-button remote is also included for straightforward everyday operation.\u003c\/p\u003e\u003cp\u003eThis system is suited to drivers who want remote access to locking, unlocking, arming, disarming, panic, and remote-start functions from a longer distance. The primary two-way remote supports up to a claimed one-mile operating range under favorable conditions. Its screen can show confirmations, alerts, vehicle status, remote battery information, and event history.\u003c\/p\u003e\u003cp\u003eFor vehicle protection, the 5908V combines an impact sensor, starter interrupt capability, point-of-entry trigger support, flashing parking-light output, and a six-tone siren. The shock sensor differentiates between minor and major impacts, allowing Warn Away and full-trigger responses when properly installed. The two-way remote can receive alerts for supported security events.\u003c\/p\u003e\u003cp\u003eThe system is built around Viper's integrated Control Center, which combines the in-vehicle antenna, status LED, and Valet control button. The rechargeable LCD remote uses a USB-C charging connection and offers configurable display, theme, language, alert, brightness, and screen-timeout settings. Its internal antenna supports two-way communication between the vehicle and the primary transmitter.\u003c\/p\u003e\u003cp\u003eAs part of an upgrade path, the 5908V supports remote keyless entry, ignition-controlled door locks, and two auxiliary outputs when these functions are connected and configured during installation. It is also compatible with the Viper SmartStart Pro system when the separately sold SmartStart Pro module is added. Because vehicle integration, remote-start safety circuits, and optional features vary by application, professional installation by an authorized dealer is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Color LCD Remote:\u003c\/strong\u003e Confirms supported commands and displays system feedback on a color screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 1-Mile Range:\u003c\/strong\u003e Provides long-distance vehicle control under favorable operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact Sensor:\u003c\/strong\u003e Detects minor and major impacts for Warn Away or full-trigger responses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Start:\u003c\/strong\u003e Starts or stops a properly configured compatible vehicle from the remote.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Interrupt:\u003c\/strong\u003e Helps prevent engine starting while the security system is armed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartStart Pro Compatibility:\u003c\/strong\u003e Supports an optional Viper SmartStart Pro upgrade module.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 5908V package centers on a color LCD two-way transmitter, a compact one-way companion transmitter, and an in-vehicle Control Center with integrated antenna, status LED, and Valet switch. The LCD remote uses an internal antenna and rechargeable battery with USB-C charging. Its configurable interface includes multiple display themes, feedback colors, screen-brightness settings, and selectable alert behavior.\u003c\/p\u003e\u003cp\u003eThis system must be installed by an authorized professional because connection requirements and available functions depend on the vehicle. Remote keyless entry, door-lock control, auxiliary functions, defroster control, and SmartStart Pro capability require correct vehicle-specific wiring, configuration, and in some cases additional parts or labor. Never use remote start in an enclosed or partially enclosed area without ventilation.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666791882822,"sku":"5908V","price":469.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71QQlnsMPQL.jpg?v=1784451083"},{"product_id":"viper-7817v-2-way-1-button-led-remote","title":"Viper 7817V 2-Way 1-Button LED Remote","description":"\u003cp\u003eThe Viper 7817V is a 2-way, 1-button LED remote designed as a replacement or additional transmitter for a compatible Viper remote-start or security system. It gives the driver a simple handheld way to send a primary command without carrying a larger multi-button remote. This model is identified by its 7817V part number and is listed for compatibility with the Viper D9817V system.\u003c\/p\u003e\u003cp\u003eIts single-button layout is suited to users who prefer straightforward daily operation. Depending on how the compatible vehicle system is configured, the button can be used for functions such as remote start, door locking or unlocking, stopping a remote-started vehicle, and car finder. Function availability and button behavior are determined by the installed system configuration.\u003c\/p\u003e\u003cp\u003eTwo-way communication distinguishes the 7817V from a basic one-way transmitter. Its transmit and confirmation LED provides visual feedback during command-related operation, while the remote can receive confirmation from a compatible vehicle system. If a requested confirmation is not received, the compatible system documentation indicates that the remote can provide an out-of-range alert.\u003c\/p\u003e\u003cp\u003eViper rates this remote for up to 1 mile of operating range under suitable conditions. Actual range can vary with vehicle placement, building density, radio interference, weather, battery condition, and the installed vehicle system. The remote's internal antenna supports its transmit-and-receive operation without an external antenna protruding from the case.\u003c\/p\u003e\u003cp\u003eThe 7817V is a practical replacement path for an owner who needs another compatible 2-way remote for a D9817V system. It is not a complete remote-start or security system by itself and requires a compatible installed Viper system to perform vehicle functions. Confirm the vehicle system model and programming requirements before purchasing or pairing a replacement transmitter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Communication:\u003c\/strong\u003e Sends commands and receives compatible system confirmation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Button Control:\u003c\/strong\u003e Keeps primary remote operation simple and compact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Feedback:\u003c\/strong\u003e Transmit and confirmation LED indicates command activity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 1-Mile Range:\u003c\/strong\u003e Supports longer-distance operation under suitable conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Antenna:\u003c\/strong\u003e Supports wireless communication without an external antenna.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD9817V Compatibility:\u003c\/strong\u003e Listed for the Viper D9817V system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 7817V uses a compact black remote design with one command button, an internal antenna, and a transmit\/confirmation LED. Viper identifies it as a 2-way LED remote; no material composition is published for the housing. The single-button format is intended for direct, everyday access to configured vehicle-system commands.\u003c\/p\u003e\u003cp\u003eThis is a handheld replacement or add-on transmitter, not a component that requires vehicle mounting or direct wiring. It must be used with a compatible installed Viper system, and remote functions vary by system configuration. Confirm compatibility with the D9817V system and have pairing, programming, or system-related service handled through an authorized installer or dealer when needed.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666882256966,"sku":"7817V","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51lYR4CY_2L.jpg?v=1784451120"},{"product_id":"viper-7858v-2-way-5-button-led-remote","title":"Viper 7858V 2-Way 5-Button LED Remote","description":"\u003cp\u003eThe Viper 7858V is a 2-way, 5-button LED transmitter designed as a replacement or additional remote for compatible Viper remote-start and security systems. It gives drivers a dedicated handheld control for supported lock, unlock, remote-start, auxiliary, and security functions. This is a transmitter only, not a complete remote-start or security system.\u003c\/p\u003e\u003cp\u003eIts 2-way communication capability is intended to provide feedback from a compatible installed system after commands are sent. LED indicators beside the buttons communicate related command activity, while the remote can also provide tones for confirmations and alerts. This helps the user distinguish between a transmitted command, a received response, and an out-of-range condition.\u003c\/p\u003e\u003cp\u003eThe 7858V is well suited to owners who need to replace a lost or damaged compatible remote, or who want an additional programmed transmitter for another driver. Its five-button layout combines direct vehicle commands with a Function button for accessing additional command levels and remote settings. Available actions depend on the vehicle system and the way it was installed and programmed.\u003c\/p\u003e\u003cp\u003eAn internal antenna handles both transmitting and receiving information, supporting the remote's 2-way LED operation. The remote has a rechargeable battery charged through its USB port, eliminating the need for routine replacement of a disposable transmitter battery. Viper identifies the transmitter with up to 1 mile of operating range under suitable conditions.\u003c\/p\u003e\u003cp\u003eFor a complete system, the 7858V works as part of the remote-control interface rather than replacing the vehicle-mounted control module, antenna, wiring, or required installation hardware. Viper lists it as a replacement or additional remote for compatible systems including the 5808V and D9858V. Proper pairing to the installed system is required before use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way LED Communication:\u003c\/strong\u003e Receives supported system responses after commands are sent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Button Layout:\u003c\/strong\u003e Provides access to primary and advanced compatible-system functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Command Indicators:\u003c\/strong\u003e Button-associated LEDs show related operating activity and confirmations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRechargeable Remote Battery:\u003c\/strong\u003e The built-in battery charges through the remote's USB port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Antenna:\u003c\/strong\u003e Supports wireless transmit and receive communication with the installed system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-Range Operation:\u003c\/strong\u003e Viper rates the remote for up to 1 mile of range.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 7858V uses a compact handheld remote design with an internal antenna, five command buttons, a dedicated Function button, and LED confirmation indicators positioned by the buttons. Its rechargeable design is built around a USB charging port for the remote battery. The layout is intended to keep common commands and status feedback readily accessible without requiring a display screen.\u003c\/p\u003e\u003cp\u003eUse this transmitter only with a confirmed compatible Viper system and compatible 2-way antenna setup. Pairing requires access to the installed system's Control Center or valet\/programming button, so professional assistance is appropriate when the vehicle system, antenna compatibility, or programming status is unknown. Command availability, including remote start, trunk release, auxiliary channels, and security functions, depends on the installed system and vehicle integration.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45666940026950,"sku":"7858V","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61gJnY_V-SL.jpg?v=1784451156"},{"product_id":"viper-7957v-2-way-color-lcd-remote-transmitter","title":"Viper 7957V 2-Way Color LCD Remote Transmitter","description":"\u003cp\u003eThe Viper 7957V is a replacement or add-on 2-way remote transmitter for compatible Viper security and remote-start systems. Its color LCD screen provides visual command confirmation, system-status information, menu access, and system messages. It is intended for owners who need to replace a lost remote or add another command-confirming transmitter to an existing compatible installation.\u003c\/p\u003e\u003cp\u003eThis transmitter uses two-way communication, allowing the remote to receive status updates after supported commands are sent to the vehicle. Screen icons, feedback text, tones, and alerts help indicate whether a command was received or whether a condition prevented it from operating. Actual functions depend on the compatible Viper system and how that system was installed and programmed.\u003c\/p\u003e\u003cp\u003eThe 7957V has direct controls for common functions including lock or arm, unlock or disarm, remote start, auxiliary outputs, and panic. Its function button also opens user and advanced menus for navigation, settings, vehicle selection, and supported feature commands. A color LCD interface makes it easier to review command feedback and recent system activity without relying only on audible confirmation.\u003c\/p\u003e\u003cp\u003ePersonalization is built into the display interface, with selectable themes, feedback colors, vehicle images, vehicle colors, languages, naming options, and time-and-date settings. The remote can also display event history with date, time, and activity information when used with a compatible system. Power-save settings allow adjustment of display brightness, screen timeout, and page-alert behavior.\u003c\/p\u003e\u003cp\u003eThe Viper 7957V is designed to work as part of an installed Viper vehicle security or remote-start system rather than as a standalone remote-start product. Confirm your current system model, antenna arrangement, and programming requirements before ordering. Professional pairing is a practical choice when adding this transmitter to an existing vehicle system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Communication:\u003c\/strong\u003e Receives supported command confirmations and system-status updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor LCD Display:\u003c\/strong\u003e Shows feedback, system information, menus, and alerts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Charging:\u003c\/strong\u003e Charges the remote's internal rechargeable battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Command Controls:\u003c\/strong\u003e Supports lock, unlock, start, AUX, and panic commands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustomizable Interface:\u003c\/strong\u003e Offers themes, languages, vehicle images, and display settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Vehicle Capability:\u003c\/strong\u003e Can support Car 1 and Car 2 selection when enabled.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 7957V uses an internal antenna, a color LCD display, physical command buttons, a function button, and a USB-C charging port. The display is designed to present vehicle-system feedback, menu selections, event information, and customizable visual settings. Its button-and-screen layout keeps frequently used vehicle commands separate from deeper menu navigation.\u003c\/p\u003e\u003cp\u003eThis transmitter must be paired to a compatible, already installed Viper system before use. Verify system compatibility and retain access to the vehicle's installed Control Center or valet\/programming switch for registration procedures. Remote-start, trunk, auxiliary, alarm, defrost, and convenience functions operate only when they are supported and configured on the paired vehicle system.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45667022733382,"sku":"7957V","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61-88BHcpfL.jpg?v=1784451195"},{"product_id":"viper-db3-all-in-one-door-lock-override-module","title":"Viper DB3 All-In-One Door Lock \u0026 Override Module","description":"\u003cp\u003eThe Viper DB3 is a universal, flashable data-bus interface module designed to integrate compatible aftermarket remote-start and security systems with a vehicle’s factory electronics. It combines door-lock control and override\/bypass functionality in one compact module. The DB3 is intended for installers building a cleaner, more vehicle-specific integration than conventional hardwired interfaces alone.\u003c\/p\u003e\u003cp\u003eThis module is designed for compatible vehicles that use modern factory data networks, including multi-CAN architectures. Its dual CAN transceivers help it communicate with vehicles that use more than one CAN network. Vehicle compatibility, available functions, and required wiring vary by make, model, year, trim, ignition type, and installed accessories.\u003c\/p\u003e\u003cp\u003eThe DB3 is well suited to remote-start-ready applications, security-system integration, and factory-key-fob control configurations where supported. It can support 3X Lock Start on applicable vehicles, allowing remote-start activation through the factory remote. It does not produce or process audio; its role is to manage vehicle-interface functions within an aftermarket security or remote-start installation.\u003c\/p\u003e\u003cp\u003eDirected’s Directechs platform provides vehicle-specific configuration information and installation documentation for supported applications. The module is flashable so the installer can load the appropriate firmware and feature set for the vehicle being serviced. This approach helps match the interface to the vehicle rather than relying on one fixed configuration.\u003c\/p\u003e\u003cp\u003eThe DB3 can be used with compatible Directed remote-start and SmartStart systems, and it works with compatible vehicle-specific T-harnesses where available. It also retains connection compatibility with DBALL2 T-harness solutions. For dependable operation and correct programming, this module is intended for professional installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-In-One Interface:\u003c\/strong\u003e Combines vehicle override and door-lock integration in one module.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual CAN Transceivers:\u003c\/strong\u003e Supports compatible vehicles with multi-CAN network architectures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlashable Firmware:\u003c\/strong\u003e Lets installers configure the module for supported vehicle applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3X Lock Start Support:\u003c\/strong\u003e Enables factory-fob remote-start activation on applicable vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-Harness Compatibility:\u003c\/strong\u003e Works with compatible vehicle-specific T-harnesses for streamlined installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartStart Ready:\u003c\/strong\u003e Supports integration with compatible Directed SmartStart systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DB3 uses a compact black module enclosure with dedicated harness connections for vehicle and accessory integration. Its hardware architecture includes dual CAN transceivers, a relocated two-pin RF port on the input side, and a unique module ID that can be used for service-history lookup. The package includes the DB3 module, four color-coded harnesses, and a warning sticker.\u003c\/p\u003e\u003cp\u003eInstallation requires selecting the correct firmware, vehicle-specific guide, and wiring method before connecting the module. Depending on the vehicle and available harness solution, installation generally requires vehicle wiring connections and may use a compatible T-harness to reduce connection work. Verify compatibility through Directed’s vehicle application resources and have a trained installer perform programming, wiring, and function testing.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45667080405062,"sku":"DB3","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61xC2E_2VVL.jpg?v=1784451230"},{"product_id":"viper-ds4-digital-remote-start-system-with-bluetooth","title":"Viper DS4 Digital Remote Start System with Bluetooth","description":"\u003cp\u003eThe Viper DS4 is a digital remote-start platform designed to integrate remote-start capability, vehicle interface functions, and Bluetooth control in one compact system. It is intended for vehicles that can support a properly programmed and professionally installed remote-start solution. The included module, universal wiring harnesses, and mountable temperature sensor provide the core hardware for a vehicle-specific installation.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth provides nearby smartphone control and supports wireless system programming through the Directed DirectLink workflow. Within Bluetooth range, compatible functions can include lock, unlock, remote start, trunk release, panic activation, and notifications, depending on the vehicle and system configuration. Directed lists Bluetooth control range at approximately 30 feet under typical conditions.\u003c\/p\u003e\u003cp\u003eThe DS4 is a low-current system suited to newer vehicles or applications that do not require the high-current relay hardware found in the DS4+ platform. Its embedded vehicle interface is designed to work with vehicle-specific firmware and installation documentation. Final features, wiring requirements, and supported commands depend on the exact vehicle, firmware, and installer configuration.\u003c\/p\u003e\u003cp\u003eFor everyday operation, the DS4 can retain use of a compatible factory key fob through 3X Lock Start, allowing remote start by pressing the OEM remote's lock button three times where supported. The included remote-mount temperature sensor is used to read cabin temperature and can report temperature to compatible two-way LED or LCD remote upgrades. No long-range RF remote is included with this base system.\u003c\/p\u003e\u003cp\u003eThe DS4 also provides a practical upgrade path for expanded control and security. Compatible D2D accessory ports support add-on components such as RF remote kits, SmartStart\/GPS modules, and security hardware. A DS4 Security Upgrade Kit is required to add the listed siren, shock, and tilt security functions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Bluetooth:\u003c\/strong\u003e Enables nearby smartphone control and wireless programming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3X Lock Start:\u003c\/strong\u003e Uses a compatible factory remote for remote start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEmbedded Vehicle Interface:\u003c\/strong\u003e Supports firmware-based integration with compatible vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Temperature Sensor:\u003c\/strong\u003e Provides a remote-mount cabin temperature reading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eD2D 2.0 Expansion:\u003c\/strong\u003e Connects compatible accessories through integrated communication ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurable Platform:\u003c\/strong\u003e Can be set up for remote start or security-capable operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DS4 uses a black plastic module housing with integrated connection ports, onboard fuse protection, and dedicated harness connections for data, analog input\/output, temperature sensing, and accessories. Its layout separates peripheral connections from vehicle-side connections to support organized routing. The base DS4 is the low-current version of the platform and does not include the DS4+ model's high-current relay fuse set.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended because the module must be flashed with vehicle-specific firmware and wired according to the applicable installation guide. The package includes universal harnesses, while a vehicle-specific T-harness may be available separately for supported applications. Verify vehicle compatibility, required bypass or integration hardware, and available factory-remote functions before purchase.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45667138175046,"sku":"DS4","price":143.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/616qJYmQuSL.jpg?v=1784451272"},{"product_id":"viper-pursuit-pro9233z-factory-keyless-security-upgrade","title":"VIPER Pursuit PRO9233Z Factory Keyless Security Upgrade","description":"\u003cp\u003eThe VIPER Pursuit PRO9233Z is a vehicle security upgrade designed for vehicles that already have factory keyless entry. It uses the vehicle's existing OEM remote controls to arm and disarm the security system, helping retain the familiar factory lock and unlock operation. This makes it a practical option for adding alarm functions without replacing the original key fobs.\u003c\/p\u003e\u003cp\u003eThe system is intended for drivers who want added vehicle monitoring while preserving factory-style daily operation. A dual-stage shock sensor provides a warning-level response and a full-trigger response, while door, hood, trunk, and shock inputs can be used as security trigger zones. Parking-light, siren, horn, and LED feedback help communicate system status.\u003c\/p\u003e\u003cp\u003eThe PRO9233Z includes a starter-interrupt output that can be used with the appropriate installation hardware to disable the starter circuit while the alarm is armed. It also supports automatic arming, automatic locking, ignition-controlled locking, and ignition-controlled unlocking through programmable settings. These options allow the installation to be configured around the vehicle and owner preferences.\u003c\/p\u003e\u003cp\u003eIts design supports integration with factory lock circuitry and selected data interfaces. The system has a FlashLogic-compatible data port for supported door-lock or transponder interfaces, plus a telematics and Weblink programming port. With a connected compatible CarLink interface, supported functions may be extended to a smartphone or tablet.\u003c\/p\u003e\u003cp\u003eThe PRO9233Z fits as a security-focused upgrade path for a factory-keyless vehicle rather than as a replacement remote-start or keyless-entry system. It can be configured for positive or negative lock, unlock, and trunk-shunt signals, helping it adapt to different vehicle wiring arrangements. Professional installation is strongly recommended because proper operation depends on vehicle-specific wiring, circuit testing, and safe placement of the module and sensor.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Remote Operation:\u003c\/strong\u003e Uses the vehicle's existing OEM keyless-entry remotes for arming and disarming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Stage Shock Sensor:\u003c\/strong\u003e Provides separate warning and full-trigger shock detection inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarter Interrupt Output:\u003c\/strong\u003e Supports a starter-disable circuit when properly installed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Security Functions:\u003c\/strong\u003e Offers programmable auto arming, locking, and relocking settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlashLogic Compatibility:\u003c\/strong\u003e Supports FlashLogic-based programming and compatible data-interface integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelematics Port:\u003c\/strong\u003e Supports compatible CarLink and Weblink-connected expansion options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRO9233Z uses a modular vehicle-security layout with a 14-pin main input\/output harness, a 5-pin control connector, a 2-pin door-lock connector, a 4-pin shock-sensor connection, a DBI port, and a telematics port. Its design separates vehicle inputs, lock-control connections, sensor wiring, and optional interface connections for organized integration. Manufacturer documentation does not specify enclosure material, but it identifies dedicated connections for the supplied shock sensor and LED\/valet programming control.\u003c\/p\u003e\u003cp\u003eInstall the module in a protected location, mount the shock sensor securely to a solid vehicle surface or sturdy harness, and adjust sensitivity after all connections are complete. The LED\/valet control requires a 5\/16-inch dashboard mounting hole, and wiring must be verified against the specific vehicle before connection. Professional installation is recommended, particularly for ignition, starter-interrupt, factory-lock, parking-light, data-bus, and trigger-circuit connections.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45667204792390,"sku":"PRO9233Z","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/41JZIcvZ0DL.jpg?v=1784451335"},{"product_id":"viper-vsm550-smartstart-pro-4g-lte-gps-module","title":"Viper VSM550 SmartStart Pro 4G LTE GPS Module","description":"\u003cp\u003eThe Viper VSM550 SmartStart Pro is a connected-vehicle GPS and smartphone-control module for compatible aftermarket remote-start and security systems. It adds app-based vehicle location, monitoring, alerts, and supported control functions without requiring a handheld remote for everyday access. It can also operate as a stand-alone GPS device for vehicle location and selected alerts.\u003c\/p\u003e\u003cp\u003eThis module is designed for drivers who want to check on a personal vehicle, family vehicle, or small fleet from a smartphone. Location-on-demand, location sharing, speed alerts, and SmartFence boundary alerts help keep vehicle activity visible. A SmartStart service plan is required for cellular communication and connected features.\u003c\/p\u003e\u003cp\u003eIts performance focus is connected convenience rather than audio reproduction. The VSM550 communicates over a 4G LTE cellular connection and uses integrated GPS for location-based features, with operation dependent on vehicle and phone signal availability. Two-way confirmation and vehicle-status functions are available when the module is paired and configured with a compatible system.\u003c\/p\u003e\u003cp\u003eThe compact module is intended for a concealed under-dash installation, helping keep the hardware out of sight. Status LEDs indicate cellular-network communication, data communication, and GPS acquisition during setup and troubleshooting. The module also uses a GPS sleep mode to reduce power consumption after inactivity.\u003c\/p\u003e\u003cp\u003eFor a full remote-control upgrade, the VSM550 pairs with most compatible digital remote-start or security systems and is optimized for Viper DS4 and DS4+ platforms. When properly integrated, it can support remote start\/stop, lock, unlock, trunk, panic, auxiliary functions, and compatible vehicle-status reporting. It is a practical add-on for building a Viper SmartStart-connected vehicle system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4G LTE Connectivity:\u003c\/strong\u003e Connects the vehicle to SmartStart services through a cellular network.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated GPS:\u003c\/strong\u003e Provides on-demand vehicle location and location-sharing capabilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartFence Alerts:\u003c\/strong\u003e Notifies you when the vehicle enters or exits a preset boundary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeed and Lockdown Alerts:\u003c\/strong\u003e Reports preset speed-threshold events and unwanted vehicle movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible System Control:\u003c\/strong\u003e Adds supported remote start, lock, unlock, and status functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealth Under-Dash Mounting:\u003c\/strong\u003e Keeps the module concealed inside the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VSM550 is a compact black SmartStart Pro module with integrated GPS capability and side-mounted orange, green, and white status LEDs. Its harness-based design supports multiple Directed connection methods, including D2D, ESP, and analog-wire applications. The module is intended to mount high in the vehicle with the marked side facing upward and with minimal obstruction to communications.\u003c\/p\u003e\u003cp\u003eInstall and verify the compatible remote-start or security system before connecting the SmartStart module. Use only the applicable supplied connector and configuration wiring for the host system; the white 4-pin data connector is specifically for Directed digital systems. Activation requires the module AirID and a SmartStart account, while GPS-only use can be configured as a stand-alone installation.\u003c\/p\u003e","brand":"Viper","offers":[{"title":"Default Title","offer_id":45667295297606,"sku":"VSM550","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81vuDEaYHFL.jpg?v=1784451381"}],"url":"https:\/\/audiowatt.store\/collections\/viper.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}