{"title":"USB Microphones","description":null,"products":[{"product_id":"rode-nt1gen5b-1-inch-usb-xlr-condenser-microphone","title":"RØDE NT1GEN5B 1-Inch USB\/XLR Condenser Microphone","description":"\u003cp\u003eThe RØDE NT1GEN5B is a large-diaphragm studio condenser microphone designed for vocal recording, instruments, voiceovers, podcasting, and home-studio production. Its Dual Connect design gives creators a choice between traditional analog XLR operation and direct USB-C recording to a computer. This flexibility helps simplify a first recording setup while keeping a path open for use with an audio interface or mixer.\u003c\/p\u003e\u003cp\u003eIts 1-inch HF6 condenser capsule uses a cardioid pickup pattern that focuses on sound in front of the microphone while reducing pickup from behind it. The side-address design is intended for placing the front of the microphone, marked by its gold dot, toward the performer or sound source. With a 20Hz–20kHz frequency range, 4dBA equivalent noise rating, and 142 dB SPL maximum rating, it is equipped for quiet detail as well as loud sources.\u003c\/p\u003e\u003cp\u003eWhen connected by XLR, the NT1GEN5B functions as an analog condenser microphone and requires 48V phantom power from a compatible preamp, mixer, or interface. The XLR output is a conventional 3-pin connection with 100-ohm output impedance. This mode is useful for studio systems that already have microphone preamps and balanced XLR inputs.\u003c\/p\u003e\u003cp\u003eUSB-C mode adds a built-in Revolution Preamp, digital conversion up to 192kHz, and 24-bit or 32-bit floating-point recording support. The microphone can connect directly to a compatible Mac or Windows computer without an external audio interface. Its onboard DSP supports APHEX processing tools including a compressor, noise gate, high-pass filter, Aural Exciter, and Big Bottom when used at 48kHz.\u003c\/p\u003e\u003cp\u003eThe NT1GEN5B includes the SM6 shock mount with pop filter, a 3m USB-C cable, a 6m XLR cable, and a dust cover. The shock mount helps reduce vibration and handling noise, while the adjustable pop filter helps control vocal plosives. It is a practical choice for creators who want one microphone that can work in a direct-to-computer setup today and in an XLR-based studio system later.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Connect Output:\u003c\/strong\u003e Use either analog XLR or direct USB-C computer connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch HF6 Capsule:\u003c\/strong\u003e Large-diaphragm cardioid design captures focused studio recordings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Self-Noise:\u003c\/strong\u003e 4dBA equivalent noise supports detailed quiet-source recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Bit Float USB:\u003c\/strong\u003e Provides expanded level recovery flexibility in compatible software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In DSP:\u003c\/strong\u003e Enables APHEX processing through compatible RØDE software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Recording Kit:\u003c\/strong\u003e Includes shock mount, pop filter, XLR cable, USB-C cable, and dust cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe NT1GEN5B has a rugged aluminum body with a black high-grade finish. Its HF6 capsule is internally shock-mounted to help reduce external vibration reaching the capsule. The microphone measures 189mm high by 52mm wide and 52mm deep, with a weight of 308g.\u003c\/p\u003e\u003cp\u003eMount the microphone in the included SM6 shock mount on a compatible microphone stand or studio arm; the mount supports 3\/8-inch and 5\/8-inch threads. Point the gold dot toward the performer and place the pop filter between the source and capsule for vocal work. Connect by XLR to equipment providing 48V phantom power, or use the included USB-C cable for direct computer recording; XLR and USB cannot be used simultaneously.\u003c\/p\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":45668852662342,"sku":"NT1GEN5B","price":213.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51-vfZouwQL.jpg?v=1784467897"},{"product_id":"rode-nt-usb-professional-usb-condenser-microphone","title":"RØDE NT-USB+ Professional USB Condenser Microphone","description":"\u003cp\u003eThe RØDE NT-USB+ is a USB condenser microphone designed to capture clear voice, vocal, and instrument recordings directly to a computer, tablet, or compatible smartphone. It provides a streamlined alternative to a separate XLR microphone, audio interface, and preamp setup. Its class-compliant USB connection supports straightforward plug-and-play use for recording, streaming, calls, and content creation.\u003c\/p\u003e\u003cp\u003eThis microphone is suited to podcasters, musicians, streamers, voice-over creators, and remote workers who want a dedicated desktop microphone. Its cardioid pickup pattern focuses on sound from the front of the microphone while helping reduce pickup from behind it. The included pop filter helps reduce plosive bursts when recording speech and vocals.\u003c\/p\u003e\u003cp\u003eThe NT-USB+ uses a studio-grade condenser capsule with a pressure-gradient acoustic design and an ultra-low-noise Revolution Preamp. It supports 24-bit, 48 kHz digital audio over USB-C for detailed recordings without requiring an external audio interface. With a 20 Hz to 20 kHz frequency range and 118 dB maximum input SPL at 10% THD, it can be used for spoken word, singing, and instruments.\u003c\/p\u003e\u003cp\u003eA built-in 3.5 mm headphone output supports direct, zero-latency monitoring while recording or streaming. Dedicated headphone level and monitor-mix controls allow the user to balance microphone monitoring with audio coming from the connected device. This makes it easier to hear performance and playback without the delayed monitoring that can occur through software.\u003c\/p\u003e\u003cp\u003eFor users who want additional voice shaping, the NT-USB+ supports onboard processing configured through compatible RØDE software. Available processing includes a noise gate, compressor, high-pass filter settings, and APHEX Aural Exciter and Big Bottom processing. The included desktop tripod, ring mount, pop filter, and USB-C cable provide a complete starting setup, while the ring mount can also attach to compatible tripods or studio arms.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Condenser Capsule:\u003c\/strong\u003e Focuses pickup toward the speaker or performer in front of the microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevolution Preamp:\u003c\/strong\u003e Provides high-gain microphone amplification with a low-noise design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit \/ 48 kHz Audio:\u003c\/strong\u003e Delivers high-resolution digital recording through its USB-C connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero-Latency Monitoring:\u003c\/strong\u003e Lets you monitor the microphone directly through connected headphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP Processing:\u003c\/strong\u003e Supports configurable compression, noise gate, filtering, and APHEX processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesktop Recording Kit:\u003c\/strong\u003e Includes a tripod, ring mount, pop filter, and USB-C cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe NT-USB+ has a compact desktop-oriented design with a 184 mm length, 62 mm width, and 50 mm depth. Its ring mount holds the microphone in position and includes a removable 1\/4-inch to 5\/8-inch thread adapter for use with compatible mounting hardware. A front-facing gold dot identifies the front of the cardioid capsule for correct placement.\u003c\/p\u003e\u003cp\u003eConnect the included SC29 USB-C to USB-C cable between the microphone and a USB-C-equipped computer, tablet, or smartphone. A computer with only USB-A ports requires a compatible USB-C-to-USB-A cable, while Lightning-equipped iPhone and iPad models require a compatible Lightning accessory cable. Attach the supplied pop filter for speech or vocal recording, connect headphones to the 3.5 mm output when monitoring is needed, and select NT-USB+ as the input and output device in the recording or communication app.\u003c\/p\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":45668882186310,"sku":"NTUSB+","price":157.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51Qshd1JNaL.jpg?v=1784469333"},{"product_id":"rode-podmicusb-dynamic-usb-xlr-broadcast-microphone","title":"RØDE PODMICUSB Dynamic USB\/XLR Broadcast Microphone","description":"\u003cp\u003eThe RØDE PODMICUSB is a dynamic broadcast microphone designed for spoken-word recording, livestreaming, gaming, voice-over work, and content creation. It combines a traditional analog XLR output with a USB-C digital connection, allowing it to work in either a conventional audio setup or a direct-to-computer recording workflow. This flexibility helps creators start simply and expand into mixers or audio interfaces later.\u003c\/p\u003e\u003cp\u003eIts end-address cardioid pickup pattern focuses on the speaker in front of the microphone while reducing pickup from the sides and rear. The dynamic capsule is intended for close-mic vocal use, making it well suited to desk-based podcast and streaming setups. For strongest voice capture, RØDE recommends positioning the microphone approximately 5 to 10 cm from the mouth.\u003c\/p\u003e\u003cp\u003eWhen connected by USB, the PODMICUSB uses a built-in Revolution Preamp and onboard APHEX processing. RØDE Central provides access to input gain and sound-shaping tools including a high-pass filter, noise gate, compressor, Aural Exciter, and Big Bottom processing. Configured processing settings remain stored in the microphone for use with other compatible software and devices over USB.\u003c\/p\u003e\u003cp\u003eThe integrated 3.5 mm headphone output supports direct monitoring while recording through USB. Its onboard control adjusts headphone level, while a press of the control enables or disables zero-latency microphone monitoring. This gives solo creators a straightforward way to hear their voice without relying on a separate headphone interface.\u003c\/p\u003e\u003cp\u003eThe PODMICUSB is built around an all-metal body with an internal shock mount, internal pop filter, and included external pop filter. Its integrated swing mount lets the microphone be angled on a compatible stand or studio arm. Use USB-C for a compact computer or mobile setup, or use XLR with an audio interface, mixer, or other analog microphone input.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR and USB-C Outputs:\u003c\/strong\u003e Connect directly to a computer or mobile device, or integrate with an XLR-based audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Cardioid Capsule:\u003c\/strong\u003e Focuses on the voice in front of the microphone and helps reduce surrounding room noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard APHEX DSP:\u003c\/strong\u003e Enables adjustable vocal processing through compatible RØDE software when using USB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring:\u003c\/strong\u003e Provides a 3.5 mm headphone output with level control and selectable zero-latency monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Pop and Shock Protection:\u003c\/strong\u003e Internal filtering and suspension help reduce plosives, knocks, and vibration noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded USB-C Cable and Pop Filter:\u003c\/strong\u003e Supplies core accessories for direct USB recording out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PODMICUSB has a black, all-metal broadcast-style enclosure with a high-power neodymium dynamic capsule. An internal shock mount reduces handling and vibration transfer, while internal and external pop filtering help control plosive sounds. The microphone includes an integrated swing mount for directional positioning and secure adjustment.\u003c\/p\u003e\u003cp\u003eMount the microphone to a stand or boom arm using its 5\/8-inch or 3\/8-inch threaded mount. Connect the supplied 3 m USB-C cable for direct recording to a compatible computer or mobile device, or connect a separately purchased XLR cable to an audio interface or mixer. Leave clearance at the rear for cabling, place the grille toward the speaker, and disengage phantom power when using the XLR output.\u003c\/p\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":45668882350150,"sku":"PODMICUSB","price":190.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ElAcEsHiL.jpg?v=1784469375"},{"product_id":"rode-podmicusbw-podmic-usb-dynamic-broadcast-microphone","title":"RØDE PODMICUSBW PodMic USB Dynamic Broadcast Microphone","description":"\u003cp\u003eThe RØDE PODMICUSBW PodMic USB is a white dynamic broadcast microphone made for podcasting, streaming, voice-over work, gaming, and other speech-focused recording. It provides both analog XLR and digital USB-C connections, allowing it to work in a traditional audio setup or directly with a computer or compatible mobile device. This dual-connect approach helps users move between simple desktop recording and more expanded audio systems without changing microphones.\u003c\/p\u003e\u003cp\u003eIts end-address cardioid design is intended to focus on the speaker in front of the microphone while reducing pickup from the sides and rear. The dynamic capsule is suited to close-mic voice recording, with RØDE recommending placement about 5 to 10 cm from the mouth. Its stated 20 Hz to 20 kHz frequency range and high maximum SPL rating support clear spoken-word capture in a variety of recording environments.\u003c\/p\u003e\u003cp\u003eFor USB recording, the PodMic USB includes RØDE's Revolution Preamp and onboard APHEX processing. Available processing includes a high-pass filter, noise gate, compressor, Aural Exciter, and Big Bottom controls through compatible RØDE software. This gives users a direct-recording path with adjustable vocal processing without requiring a separate hardware processor.\u003c\/p\u003e\u003cp\u003eA built-in 3.5mm headphone output supports zero-latency monitoring when the microphone is connected by USB. The onboard headphone volume control lets the user adjust monitoring level directly from the microphone. This is useful for checking voice level and audio quality while recording or streaming.\u003c\/p\u003e\u003cp\u003eThe PODMICUSBW can connect by XLR to an audio interface, mixer, or other analog audio equipment, or by USB-C for plug-and-play digital use. Its integrated swing mount supports practical positioning on a microphone stand or studio arm. The included USB-C cable and pop filter help establish a complete basic USB recording setup, while the XLR output provides an upgrade path into a larger production system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR And USB-C Outputs:\u003c\/strong\u003e Connects to mixers, interfaces, computers, and compatible mobile devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Cardioid Capsule:\u003c\/strong\u003e Prioritizes close speech capture while reducing surrounding sound pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPHEX DSP Processing:\u003c\/strong\u003e Provides adjustable vocal processing through compatible RØDE software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero-Latency Headphone Monitoring:\u003c\/strong\u003e Monitor USB recordings through the integrated 3.5mm output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Pop And Shock Protection:\u003c\/strong\u003e Helps reduce plosives, vibration, and handling-related noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Metal Construction:\u003c\/strong\u003e Provides a durable housing for regular studio or desktop use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PodMic USB uses a robust all-metal body with a white finish, integrated swing mount, internal shock mount, and internal pop filter. A removable external pop filter is included for additional plosive control. The microphone weighs 900 g and measures 172 mm long, 107 mm wide, and 62 mm high.\u003c\/p\u003e\u003cp\u003eMount the integrated swing mount to a compatible microphone stand or studio arm using its 5\/8-inch or 3\/8-inch thread support, then angle the microphone toward the speaker. For direct recording, connect the supplied SC29 USB-C cable to a USB-C-equipped computer or compatible device and select the PodMic USB as the input source. For an analog setup, connect its 3-pin XLR output to a mixer or audio interface, and disable phantom power on the connected input.\u003c\/p\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":45668882612294,"sku":"PODMICUSBW","price":183.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/717WRAhMD9L.jpg?v=1784469418"},{"product_id":"rode-x-xdm-100-dynamic-usb-streaming-microphone","title":"RØDE X XDM-100 Dynamic USB Streaming Microphone","description":"\u003cp\u003eThe RØDE X XDM-100 is a dynamic USB microphone built for streamers, gamers, and creators who want a focused voice sound without adding a separate audio interface. Its end-address design connects directly to a computer through USB-C, keeping a desktop streaming or gaming setup straightforward. A built-in 3.5mm headphone output also provides a direct monitoring point at the microphone.\u003c\/p\u003e\u003cp\u003eIts dynamic capsule and cardioid pickup pattern are designed to prioritize the voice in front of the microphone while reducing capture from the surrounding room. This makes the XDM-100 well suited to desk setups where keyboard, mouse, fan, or room noise may be present. For close speaking, RØDE recommends positioning the microphone approximately 2 to 6 inches from the mouth.\u003c\/p\u003e\u003cp\u003eThe XDM-100 uses an ultra-low-noise, high-gain Revolution Preamp and 24-bit\/48 kHz analog-to-digital conversion. Its frequency range extends from 20 Hz to 20 kHz for full-range voice capture. Internal DSP supports voice processing when used with RØDE's UNIFY software.\u003c\/p\u003e\u003cp\u003eUNIFY adds virtual mixing and routing for microphone, game, chat, music, browser, and system audio sources. It also provides adjustable voice tools including a high-pass filter, noise gate, compressor, APHEX Aural Exciter, and Big Bottom processing. The microphone can function as both the computer's audio input and headphone output device.\u003c\/p\u003e\u003cp\u003eThe XDM-100 is supplied with practical accessories for a more complete streaming station, including a PSM1 shock mount, foam pop shield, USB-C cable, and headphone extension cable. It is a USB-powered solution for users who want a dedicated vocal microphone with direct headphone monitoring. Pair it with a compatible desktop stand or studio arm to position it close to the speaker.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Cardioid Capsule:\u003c\/strong\u003e Focuses pickup toward the speaker while helping reduce room and desk noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Connectivity:\u003c\/strong\u003e Connects directly to a compatible computer without a separate audio interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRevolution Preamp:\u003c\/strong\u003e Provides high-gain, ultra-low-noise microphone circuitry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/48 kHz Conversion:\u003c\/strong\u003e Delivers high-resolution digital audio to the connected computer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Headphone Monitoring:\u003c\/strong\u003e Uses a 3.5mm output for zero-latency monitoring, level control, and mute functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNIFY Integration:\u003c\/strong\u003e Adds virtual mixing, routing, and adjustable voice processing for streaming workflows.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XDM-100 has a black microphone body with an end-address grille, status LED, integrated USB-C connection, and 3.5mm headphone output. Its included PSM1 shock mount uses elastic suspension to help isolate the microphone from vibrations that can travel through a desk or boom arm. A foam pop shield is included to help manage plosive sounds during close vocal use.\u003c\/p\u003e\u003cp\u003eConnect the included USB-C to USB-C cable from the microphone to a compatible computer and select the XDM-100 as the input and output device in the computer's audio settings. If the computer uses USB-A, a compatible USB-C to USB-A cable is required. Mount the included shock mount to a compatible desktop stand or studio arm, keep the microphone close to the speaker, and use the supplied pop shield for close-up voice work.\u003c\/p\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":45668939169862,"sku":"XDM100","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51Oa5wrqLUL.jpg?v=1784471134"},{"product_id":"shure-mv6-usb-gaming-microphone","title":"Shure MV6 USB Gaming Microphone","description":"\u003cp\u003eThe Shure MV6 is a dynamic USB gaming microphone designed for streaming, gaming, podcasting, voice chat, and desktop recording. It connects through USB-C for a straightforward setup with compatible computers and mobile devices. Its cardioid pickup pattern is engineered to focus on the person speaking into the microphone while reducing pickup from the rear and sides.\u003c\/p\u003e\u003cp\u003eThis microphone is suited to gamers, streamers, and creators who want a dedicated voice microphone without adding an XLR interface or separate preamp to their desk. The built-in 3.5 mm headphone output allows direct headphone monitoring while recording, streaming, or chatting. A touch-operated mute control provides quick microphone muting from the desktop.\u003c\/p\u003e\u003cp\u003eThe MV6 uses a moving-coil dynamic transducer with a 50 Hz to 15 kHz frequency response. Its focused cardioid pattern and Voice Isolation Technology help reduce the impact of room noise, keyboard noise, fans, and other off-axis distractions. This makes it particularly practical for speech-focused use in typical home gaming or streaming spaces.\u003c\/p\u003e\u003cp\u003eInternal DSP tools include Auto Level Mode, Digital Popper Stopper, Real-time Denoiser, a tone control, and a high-pass filter. Auto Level Mode adjusts microphone gain in real time, while the Denoiser and Popper Stopper are intended to help manage background noise and plosive sounds. Settings can be adjusted through the Shure MOTIV Mix desktop app or compatible Shure MOTIV mobile apps.\u003c\/p\u003e\u003cp\u003eThe MV6 includes a round desktop base stand and a 1 m USB-C to USB-C cable, creating a ready-to-use desktop microphone setup. Its 5\/8-inch-27 threaded mount also supports compatible microphone mounting hardware when a boom arm or alternate stand is preferred. The USB-C, headphone-monitoring, and software-control features make it a flexible upgrade for a gaming desk or creator workstation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Cardioid Capsule:\u003c\/strong\u003e Focuses vocal pickup toward the front of the microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Isolation Technology:\u003c\/strong\u003e Helps reduce room and off-axis background noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Level Mode:\u003c\/strong\u003e Automatically adjusts gain based on voice level and distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-time DSP:\u003c\/strong\u003e Includes denoising and plosive-reduction processing for speech.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring:\u003c\/strong\u003e Provides a 3.5 mm output for direct listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Connectivity:\u003c\/strong\u003e Connects directly to compatible computers and mobile devices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MV6 uses a diecast zinc-alloy housing and a desktop-oriented form factor inspired by Shure's broadcast-style microphone designs. It includes a sturdy round base desktop stand, while the microphone itself uses a standard 5\/8-inch-27 threaded mounting point. The touch mute button offers an integrated control point without requiring a separate inline switch.\u003c\/p\u003e\u003cp\u003eFor setup, connect the included USB-C to USB-C cable between the microphone and a compatible USB-C host device, then select the MV6 as the audio input in the desired game, streaming, chat, or recording software. Connect headphones to the 3.5 mm output for direct monitoring and adjust microphone, monitor-mix, tone, denoiser, popper-stopper, and high-pass-filter settings in MOTIV Mix where desired. Lightning-equipped iOS devices require a separate USB-C to Lightning cable.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45668961681478,"sku":"MV6","price":169.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61u0AqBTp3L.jpg?v=1784474733"},{"product_id":"shure-mv7-k-dynamic-usb-c-xlr-podcast-microphone","title":"Shure MV7+K Dynamic USB-C\/XLR Podcast Microphone","description":"\u003cp\u003eThe Shure MV7+K is a dynamic podcast microphone designed for spoken-word recording, livestreaming, broadcasting, gaming, and vocal content creation. Its cardioid pickup pattern focuses on sound directly in front of the microphone, helping reduce pickup of unwanted room sound from the sides and rear. It is suited to creators who need a close-address microphone with both direct USB-C convenience and conventional XLR connectivity.\u003c\/p\u003e\u003cp\u003eUsing USB-C, the MV7+K connects directly to compatible computers, phones, and tablets while providing digital audio and onboard processing controls. Its USB output supports real-time headphone monitoring through the built-in 3.5 mm output, making it practical for checking mic level and computer playback during a session. The passive XLR output also allows connection to a mixer or audio interface.\u003c\/p\u003e\u003cp\u003eThe microphone uses a moving-coil dynamic transducer with a 50 Hz to 16 kHz frequency response and a unidirectional cardioid pattern. This close-mic design is intended to maintain vocal intelligibility with a balanced tone. Voice Isolation Technology combines the directional capsule with DSP to help emphasize the speaker over nearby background sound.\u003c\/p\u003e\u003cp\u003eShure's onboard DSP provides Auto Level Mode, real-time denoising, a Digital Popper Stopper, adjustable tone, reverb, compression, limiting, and high-pass filtering. These controls are available through MOTIV Mix for desktop and Shure MOTIV Audio and Video apps for mobile use. The microphone retains the most recently used settings for faster repeat setup.\u003c\/p\u003e\u003cp\u003eA full-color LED touch panel adds live level metering, customizable lighting behavior, brightness control, and tap-to-mute operation. The MV7+K can be mounted on a standard microphone stand or boom using its adjustable yoke and 5\/8-inch-27 threaded mount. For a system upgrade path, use USB-C for a compact plug-and-play setup or XLR with an external interface or mixer when adding outboard recording equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid USB-C\/XLR Outputs:\u003c\/strong\u003e Connect directly to a computer or mobile device, or use an XLR mixer or audio interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Dynamic Capsule:\u003c\/strong\u003e Focuses on the speaker in front of the microphone for close-mic vocal capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Isolation Technology:\u003c\/strong\u003e Combines directional pickup and DSP to help reduce unwanted background sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP Suite:\u003c\/strong\u003e Includes Auto Level, denoising, pop filtering, tone control, reverb, compression, limiting, and high-pass filtering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Touch Panel:\u003c\/strong\u003e Provides tap-to-mute control, level display, and configurable color and brightness behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring:\u003c\/strong\u003e The 3.5 mm output supports direct, latency-free monitoring with compatible headphones or earphones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MV7+K uses a diecast aluminum housing with an adjustable yoke assembly and black foam windscreen. Its all-metal construction is designed for regular desktop, boom-arm, and studio use. The LED touch panel runs along the body for visible status, level monitoring, and mute control.\u003c\/p\u003e\u003cp\u003eFor USB operation, connect the included 3 m USB-C to USB-C cable to a compatible computer, phone, or tablet, then connect headphones to the 3.5 mm monitor output if desired. For analog operation, connect its passive XLR output to a mixer or audio interface; Shure notes that XLR audio is not affected by software settings. Mount the microphone to a 5\/8-inch-27 stand or boom thread, or use the included 5\/8-inch-to-3\/8-inch adapter where needed.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45668961714246,"sku":"MV7+K","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81SkpwyPZnL.jpg?v=1784474774"},{"product_id":"shure-mv7-w-usb-c-xlr-dynamic-podcast-microphone-white","title":"Shure MV7+-W USB-C\/XLR Dynamic Podcast Microphone, White","description":"\u003cp\u003eThe Shure MV7+-W is a dynamic podcast microphone designed for close-miked speech, streaming, voiceover work, and recording. Its cardioid pickup pattern helps focus on the speaker while reducing pickup from the sides and rear. The white finish gives creators a clean visual option for on-camera desktop and studio setups.\u003c\/p\u003e\u003cp\u003eThis microphone suits podcasters, gamers, livestreamers, musicians, and remote presenters who want a direct USB-C workflow with the option to move to an XLR-based audio system. USB-C connection supports digital recording with onboard processing and headphone monitoring. The passive XLR output connects to compatible mixers and audio interfaces for analog signal paths.\u003c\/p\u003e\u003cp\u003eThe MV7+ is voiced for vocal intelligibility and balanced close-mic sound, with a dynamic moving-coil capsule that is well suited to spoken-word applications. Its 50 Hz to 16 kHz specified frequency response covers the core range of voice and vocal detail. Voice Isolation Technology combines the cardioid pattern with DSP to help reduce unwanted ambient sound.\u003c\/p\u003e\u003cp\u003eShure's onboard DSP tools provide practical control without requiring separate processing hardware in a USB setup. Auto Level Mode adjusts microphone gain automatically, while the real-time Denoiser, Digital Popper Stopper, tone control, compressor, limiter, high-pass filter, and reverb modes can be adjusted through compatible Shure software. A 3.5 mm headphone output provides direct monitoring.\u003c\/p\u003e\u003cp\u003eThe MV7+-W is built around an all-metal diecast aluminum housing and adjustable yoke for flexible placement on a stand or boom arm. Its LED touch panel supports touch-to-mute operation, live level metering, and customizable color and brightness settings. This hybrid design can serve as a simple USB microphone today and remain useful when adding an XLR interface or mixer later.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid USB-C and XLR Outputs:\u003c\/strong\u003e Connect directly to a computer or mobile device, or use a compatible XLR mixer or interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Dynamic Capsule:\u003c\/strong\u003e Focuses on the speaker's voice for close-mic podcasting, streaming, and voice recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Level Mode:\u003c\/strong\u003e Automatically adjusts gain to help maintain a consistent voice level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Voice DSP:\u003c\/strong\u003e Includes denoising, pop reduction, tone control, compression, limiting, high-pass filtering, and reverb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Touch Panel:\u003c\/strong\u003e Provides tap-to-mute control, level indication, and configurable lighting behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Headphone Monitoring:\u003c\/strong\u003e The 3.5 mm output lets you monitor microphone and computer audio without added delay.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MV7+-W uses a rugged diecast aluminum housing, adjustable yoke, and foam windscreen for a durable desktop or boom-mounted microphone arrangement. Its white body is paired with a customizable LED touch panel that can display metering or selected lighting patterns. The microphone weighs 573.5 g and uses a standard 5\/8-inch-27 mounting thread.\u003c\/p\u003e\u003cp\u003eFor plug-and-play use, connect the included 3 m USB-C-to-USB-C cable to a compatible computer, phone, or tablet and connect headphones to the 3.5 mm monitor output if desired. For analog use, connect the passive XLR output to a compatible mixer or audio interface; Shure notes that XLR audio is not affected by software settings. The included 5\/8-inch-to-3\/8-inch adapter helps fit stands using the smaller European thread standard.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45668961812550,"sku":"MV7+W","price":282.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81jiprM2l_L.jpg?v=1784474874"},{"product_id":"shure-mv88-usbc-usb-c-stereo-microphone","title":"Shure MV88-USBC USB-C Stereo Microphone","description":"\u003cp\u003eThe Shure MV88-USBC is a compact stereo condenser microphone that connects directly to a compatible USB-C phone, tablet, or computer for mobile recording. It is designed for creators who want a more controlled audio capture option than a device's built-in microphone. Its direct USB-C connection avoids separate pairing, charging, and cable requirements for everyday recording.\u003c\/p\u003e\u003cp\u003eBuilt for vlogging, interviews, voice recording, music, and field capture, the MV88-USBC uses a mid-side capsule arrangement to create an adjustable stereo image. Selectable capture modes allow the microphone to suit focused voice pickup, two-person interviews, stereo ambience, or raw mid-side recording. This makes it practical for users who record in changing locations and with different sound sources.\u003c\/p\u003e\u003cp\u003eThe microphone works with Shure MOTIV mobile and desktop apps for recording and sound adjustment. Auto Level Mode can manage gain in real time, while Real-Time Denoiser is available to reduce unwanted background noise. Manual controls in compatible MOTIV apps include gain, compression, five-band EQ, high-pass filtering, and stereo-width adjustment.\u003c\/p\u003e\u003cp\u003eFive customizable recording presets provide a starting point for speech, singing, acoustic instruments, loud sources, or a flat response. The adjustable stereo setting spans a 60° to 135° width, helping users choose a narrower or wider sound field. Mono cardioid and mono bi-directional modes provide alternate pickup options when stereo recording is not the goal.\u003c\/p\u003e\u003cp\u003eThe MV88-USBC is housed in metal and measures just 67.9 mm long, making it easy to carry with a mobile recording setup. Its microphone barrel can tilt, flip, and rotate up to 90 degrees to aim toward the source in portrait or landscape use. A foam windscreen and protective carrying case are included for basic portable recording use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Direct Connection:\u003c\/strong\u003e Plugs into compatible USB-C devices without a separate audio cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-Side Stereo Design:\u003c\/strong\u003e Uses cardioid and bidirectional capsules for adjustable stereo capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Polar Patterns:\u003c\/strong\u003e Supports stereo, cardioid, bi-directional, and raw mid-side recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Level Mode:\u003c\/strong\u003e Adjusts microphone gain in real time for more consistent levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Denoiser:\u003c\/strong\u003e Helps reduce background noise through compatible MOTIV app processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Positioning:\u003c\/strong\u003e Tilts, flips, and rotates up to 90 degrees for source alignment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MV88-USBC uses lightweight all-metal construction with a black finish and a compact integrated USB-C connector. It weighs 40.5 g and combines a 10 mm cardioid condenser cartridge with a 10 mm bidirectional condenser cartridge. A status LED indicates connection, mute, settings-lock, and firmware-update states.\u003c\/p\u003e\u003cp\u003ePlug the microphone directly into a compatible USB-C device, then use a recording app or the Shure MOTIV app to confirm input and adjust settings. The reversible USB-C connector permits either connection orientation, while the pivoting barrel helps aim the microphone toward the source. It supports phone cases up to 2.1 mm thick; thicker cases may require a USB-C extension adapter.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45668977115206,"sku":"MV88-USBC","price":159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71cvBnNRP2L.jpg?v=1784475337"},{"product_id":"presonus-revelator-usb-condenser-microphone","title":"PreSonus REVELATOR USB Condenser Microphone","description":"\u003cp\u003eThe PreSonus REVELATOR is a USB condenser microphone designed for podcasting, streaming, voice-over work, online interviews, and home recording. It combines a microphone, USB audio interface, mixer, onboard effects processor, and headphone amplifier in one desktop-ready unit. This approach helps reduce the need for separate recording hardware for computer-based voice and content-creation setups.\u003c\/p\u003e\u003cp\u003eIts three selectable polar patterns make it suitable for more than one recording situation. Cardioid mode focuses on a single source, omnidirectional mode captures sound around the microphone, and Figure-8 mode is useful for two-person recordings. That flexibility supports solo podcasts, shared interviews, vocals, acoustic instruments, and collaborative sessions.\u003c\/p\u003e\u003cp\u003eThe mono condenser capsule has a 20 Hz to 20 kHz frequency response, 1 mV\/Pa sensitivity, and a maximum SPL rating of 110 dB at less than 3% THD. These specifications support detailed voice and acoustic-instrument capture within its intended desktop recording role. A built-in 1\/8-inch active stereo headphone output provides direct monitoring while recording or streaming.\u003c\/p\u003e\u003cp\u003eRevelator includes onboard Fat Channel processing with a high-pass filter, noise gate, compressor models, EQ models, and limiter. Voice effects include comb filter, delay, doubler, ring modulator, vocoder, and reverb, with eight factory presets and eight user preset locations. Processing settings can be managed from the microphone and through PreSonus Universal Control software.\u003c\/p\u003e\u003cp\u003eFor streaming and remote production, the USB-C-compatible USB 2.0 connection supports integrated computer audio routing and two stereo loopback channels. Multi Mode configures Revelator as three stereo devices: Revelator, Revelator Loopback 1, and Revelator Loopback 2. This makes it practical to combine a microphone with computer playback, calls, game audio, or backing tracks in one desktop recording system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Polar Patterns\u003c\/strong\u003e Cardioid, omnidirectional, and Figure-8 modes adapt to solo or shared recordings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP\u003c\/strong\u003e Fat Channel processing and voice effects shape sound without external hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreset Storage\u003c\/strong\u003e Eight factory presets and eight user slots support repeatable setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoopback Audio\u003c\/strong\u003e Two stereo loopback channels route computer audio for streams and calls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring\u003c\/strong\u003e The 1\/8-inch output supports direct, zero-latency monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Bus Power\u003c\/strong\u003e USB-C-compatible USB 2.0 operation does not require a separate power supply.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REVELATOR uses a black desktop microphone design with a built-in stand and integrated cable management. Its compact enclosure measures 5.13 inches wide by 5.13 inches deep and 8.94 inches high. Front-panel hardware controls provide access to direct monitoring, microphone gain, headphone level, mute, and preset selection.\u003c\/p\u003e\u003cp\u003eConnect the microphone to a compatible computer or supported mobile device through its USB-C-compatible USB 2.0 connection, then select it as the recording and playback device in the desired application. Connect headphones to the 1\/8-inch TRS active stereo output for monitoring, and use Universal Control for advanced routing, polar-pattern selection, monitor mixing, and preset management. For remote interviews or streaming, Multi Mode can separate microphone audio and loopback sources for application-based routing.\u003c\/p\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":45669200658502,"sku":"REVELATOR","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81THNU46LbL.jpg?v=1784481384"},{"product_id":"zoom-am7-usb-c-mid-side-stereo-microphone-for-android","title":"Zoom Am7 USB-C Mid-Side Stereo Microphone for Android","description":"\u003cp\u003eThe Zoom Am7 is a compact USB-C mid-side stereo microphone designed to bring higher-quality audio recording to compatible Android devices. It connects directly to an Android device's USB Type-C port, making it a practical option for recording music, interviews, ambient sound, and video without carrying a separate recorder. Its integrated design keeps the recording setup compact for mobile production.\u003c\/p\u003e\u003cp\u003eBuilt for creators who use an Android phone or tablet as their recording platform, the Am7 works with the free Zoom Handy Recorder app and other Android apps that accept an external microphone input. It can also be used with compatible camera applications for improved sound when shooting video. A combined stereo mini jack provides headphone monitoring and can also serve as a line-level output.\u003c\/p\u003e\u003cp\u003eThe Am7 uses a Mid-Side stereo microphone configuration with selectable 90-degree, 120-degree, and M-S recording modes. The 90-degree setting suits a more focused stereo image, while the 120-degree setting captures a broader left-to-right sound field. M-S recording allows stereo width adjustment after recording in the Handy Recorder app.\u003c\/p\u003e\u003cp\u003eA rotating microphone capsule helps maintain correct stereo orientation when switching between audio recording and video recording positions. This is useful when filming in landscape orientation or changing between front and rear camera use. The capsule can be aimed toward the sound source while the connected device remains positioned for the shot.\u003c\/p\u003e\u003cp\u003eFor practical level control, the Am7 includes a manual MIC GAIN knob and LED level indication. The microphone supports 44.1 kHz or 48 kHz recording at 16-bit resolution and handles sound-pressure levels up to 120 dB SPL. It is powered by the connected device, so no separate battery is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Android Connection:\u003c\/strong\u003e Connects directly to compatible Android devices with a USB Type-C port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-Side Stereo System:\u003c\/strong\u003e Captures stereo audio with selectable 90-degree, 120-degree, and M-S modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotatable Capsule:\u003c\/strong\u003e Helps preserve stereo orientation for audio or camera recording positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Gain Control:\u003c\/strong\u003e Front-panel MIC GAIN knob allows direct recording-level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone and Line Output:\u003c\/strong\u003e Stereo mini jack supports monitoring and line-level output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandy Recorder Support:\u003c\/strong\u003e Free Zoom app enables recording, editing, effects, and M-S width adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Am7 combines a compact M-S stereo microphone, USB Type-C connector, gain knob, stereo-width switch, LED level indicator, and stereo mini jack in one portable housing. Its microphone assembly rotates for orientation changes, and the included case adjuster can be removed when a device case interferes with full USB-C insertion. A foam windscreen is included to help reduce wind noise during outdoor recording.\u003c\/p\u003e\u003cp\u003eTo use it, fully connect the Am7 to a compatible Android device's USB-C port and open the Handy Recorder app or another app that supports external microphones. Set the desired stereo width, point the mid-microphone arrow toward the recording subject, and adjust gain while watching the LED level indicator. For monitoring, connect headphones to the stereo mini jack; Zoom recommends using Airplane Mode during recording to reduce possible wireless-interference noise.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669218975814,"sku":"ZAm7","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Gf4du07PL.jpg?v=1784482713"},{"product_id":"zoom-podtrak-p2-dual-usb-mic-podcast-recorder","title":"Zoom PodTrak P2 Dual USB Mic Podcast Recorder","description":"\u003cp\u003eThe Zoom PodTrak P2 is a compact two-person podcast recorder designed for creators using USB microphones. It accepts up to two USB mics, provides two headphone outputs, and records directly to a microSDHC or microSDXC card. This focused layout helps simplify mobile interviews, co-hosted shows, and small recording setups without requiring a computer.\u003c\/p\u003e\u003cp\u003eIt is well suited to podcasters, streamers, journalists, educators, and content teams recording conversations with one host and one guest. Each USB mic has its own input level control and mute function, while both participants can monitor through headphones. A computer, smartphone, or tablet can also be connected for calls, playback, streaming, or interface use.\u003c\/p\u003e\u003cp\u003eThe P2 records WAV files at 48 kHz and 24-bit resolution in stereo or mono formats. It can save a stereo mix or create separate microphone and USB-device files in Multi Track mode for later editing. Up to four tracks can be recorded and played back simultaneously.\u003c\/p\u003e\u003cp\u003eBuilt-in TONE, AI Noise Reduction, and COMP processing help shape monitored audio and the signal sent to a connected computer, smartphone, or tablet. Its AIF Mix Minus function can prevent a remote caller's own voice from being returned to them, reducing feedback during call-in interviews. The P2 also operates as a 2-in\/2-out USB audio interface at 48 kHz and 24-bit.\u003c\/p\u003e\u003cp\u003eFor portable setups, the recorder can run from four AA batteries, USB bus power, a compatible USB AC adapter, or a 5V portable battery. It can stream audio to a connected device while recording to a memory card at the same time. This makes the P2 a practical central recorder for a two-USB-mic podcast kit with headphones, storage, and a remote-call device.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual USB Mic Inputs:\u003c\/strong\u003e Connect two USB microphones for a straightforward two-person recording setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Headphone Outputs:\u003c\/strong\u003e Lets both participants monitor the session from stereo mini-jack headphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48 kHz\/24-Bit WAV Recording:\u003c\/strong\u003e Captures stereo or mono WAV files to supported microSD cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Noise Reduction:\u003c\/strong\u003e Helps reduce unwanted background noise in monitored and USB-sent audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Mix Minus:\u003c\/strong\u003e Prevents remote-call audio from feeding back to the caller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Audio Interface:\u003c\/strong\u003e Provides 2-in\/2-out audio connectivity for computers and mobile devices.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PodTrak P2 uses a compact, purpose-built recorder enclosure measuring 82 mm wide, 116 mm deep, and 43 mm high. Zoom does not specify the enclosure material. Its control layout includes separate USB mic level controls, mute controls, level indicators, recording and playback controls, and a shared headphone-volume control.\u003c\/p\u003e\u003cp\u003eInsert a compatible microSDHC or microSDXC card, connect one or two USB microphones to the USB Type-A ports, and connect headphones to the two stereo mini-jack outputs. Use the USB Type-C data port to connect a computer, smartphone, or tablet for audio-interface operation, remote guests, file transfer, or streaming; a USB AC adapter is recommended when using a smartphone or tablet. The unit can be powered by four AA batteries, USB bus power, a 5V portable battery, or a 12W-or-higher USB AC adapter.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669235458118,"sku":"ZP2","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/714JFMbKmhL.jpg?v=1784487466"},{"product_id":"zoom-zum-2-usb-condenser-microphone","title":"Zoom ZUM-2 USB Condenser Microphone","description":"\u003cp\u003eThe Zoom ZUM-2 is a USB condenser microphone designed for direct recording, streaming, podcasting, voice-over work, online communication, and music creation with a computer. It connects through USB-C and is powered by the computer’s USB bus, eliminating the need for a separate audio interface or external microphone preamp. Its plug-and-play design helps simplify a desktop recording setup for creators who want a dedicated microphone rather than relying on a built-in computer mic.\u003c\/p\u003e\u003cp\u003eBuilt around a back electret condenser capsule, the ZUM-2 uses a supercardioid pickup pattern to focus on the sound in front of the microphone while reducing pickup from surrounding room noise and off-axis sources. This makes it well suited to close-miked spoken-word applications such as podcasts, livestreams, gaming chat, voice-over recording, and video calls. The side-address format supports natural placement on a desktop stand or compatible microphone arm.\u003c\/p\u003e\u003cp\u003eThe microphone supports 24-bit digital audio at sample rates up to 96 kHz, giving compatible recording software access to high-resolution capture settings. Its specified 20 Hz to 20 kHz frequency response covers the standard audible range, while its 135 dB SPL maximum rating provides headroom for louder vocal or instrument sources. The ZUM-2 records mono microphone audio through its USB connection.\u003c\/p\u003e\u003cp\u003eA built-in 3.5 mm stereo headphone output provides a convenient monitoring point directly on the microphone. The dedicated front-mounted headphone volume control lets users adjust the listening level without reaching for computer settings. This output is intended for monitoring computer audio through headphones connected to the microphone.\u003c\/p\u003e\u003cp\u003eThe included foam windscreen helps reduce breath noise and vocal plosives during close microphone use. Zoom also includes a USB Type-A to USB Type-C cable, a TPS-4 tabletop tripod mic stand, a pivoting stand mount, and a threaded adapter. Together, these accessories provide a ready-to-use desktop recording setup that can also be adapted for compatible microphone stands.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Computer Connection:\u003c\/strong\u003e Connects directly to a computer without an audio interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupercardioid Pickup Pattern:\u003c\/strong\u003e Focuses on the source while reducing unwanted surrounding sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/96 kHz Audio:\u003c\/strong\u003e Supports high-resolution recording in compatible software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring Output:\u003c\/strong\u003e Provides a 3.5 mm stereo connection for headphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Volume Knob:\u003c\/strong\u003e Adjusts headphone listening level directly from the microphone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Desktop Accessories:\u003c\/strong\u003e Includes a windscreen, tripod stand, mount, adapter, and USB cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZUM-2 has a black cylindrical body with a side-address microphone format, integrated blue power indicator, USB Type-C port, headphone output, and headphone volume knob. Its back electret condenser design and supercardioid pattern are intended for close, front-facing voice capture. The microphone measures 54 mm in diameter by 150 mm long and weighs 422 g.\u003c\/p\u003e\u003cp\u003eConnect the included USB Type-A to USB Type-C cable between the microphone and a compatible Mac or Windows computer, then select ZUM-2 as the input and output device in the operating system or recording application. Position the microphone with the speaking side facing the user and use the included foam windscreen for close vocal work. The included TPS-4 tabletop tripod and pivoting mount support desktop placement, while the supplied 5\/8-inch to 3\/8-inch threaded adapter helps accommodate compatible stand hardware.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669296078918,"sku":"ZUM2","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61vBd1JWENL.jpg?v=1784488768"},{"product_id":"zoom-zum-2pmp-usb-podcast-microphone-pack","title":"Zoom ZUM-2PMP USB Podcast Microphone Pack","description":"\u003cp\u003eThe Zoom ZUM-2PMP Podcast Mic Pack is a computer-based recording bundle for podcasting, streaming, voice-over work, music ideas, and video calls. It combines a USB condenser microphone with monitoring headphones, a desktop tripod, a foam windscreen, and a USB cable. This configuration gives a new creator a coordinated desktop recording setup without requiring a separate audio interface.\u003c\/p\u003e\u003cp\u003eAt the center of the pack is the ZUM-2 USB microphone, a back electret condenser design with a supercardioid pickup pattern. Its focused pattern is intended to prioritize the person speaking into the front of the microphone while reducing off-axis room sound. The microphone supports recording at up to 24-bit\/96 kHz for detailed computer-based capture.\u003c\/p\u003e\u003cp\u003eThe ZUM-2 includes a 3.5 mm headphone output and a dedicated volume control for listening to computer audio through the mic. The included ZHP-2 closed-back headphones provide isolation for monitoring while recording. Their 40 mm neodymium drivers, 68-ohm impedance, and 3-meter cable suit desktop listening and voice-production sessions.\u003c\/p\u003e\u003cp\u003eFor placement, the included TPS-4 tabletop tripod provides a compact, height-adjustable base for the microphone. Its collapsible legs, rubber feet, and metal-threaded connection support portable desktop setups. A pivoting microphone mount helps angle the ZUM-2 toward the speaker, while the fitted foam windscreen helps reduce breath noise and plosive sounds.\u003c\/p\u003e\u003cp\u003eThe ZUM-2PMP connects directly to a compatible PC or Mac using the included USB Type-C to Type-A cable. It uses USB bus power and does not require a separate microphone preamp or external power supply for normal computer use. It can serve as a straightforward starting point for users who may later add a boom arm, larger desktop stand, or other computer-based recording accessories.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Podcast Pack:\u003c\/strong\u003e Includes microphone, headphones, tripod, windscreen, cable, and guide.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupercardioid USB Microphone:\u003c\/strong\u003e Focuses on the speaker while reducing off-axis sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/96 kHz Audio:\u003c\/strong\u003e Supports detailed computer recording at multiple sample rates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring Output:\u003c\/strong\u003e Connect headphones directly to the microphone for computer-audio monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosed-Back Headphones:\u003c\/strong\u003e Provide isolation for recording, streaming, and voice-over monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact TPS-4 Tripod:\u003c\/strong\u003e Offers adjustable tabletop microphone placement with folding legs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZUM-2 uses a sturdy cylindrical microphone housing with a Type-C computer connection, 3.5 mm headphone output, and front-panel headphone-volume control. The supplied TPS-4 tripod has a metal-threaded connector, collapsible legs, and rubber feet for stable tabletop use. The package also includes a pivoting microphone mount and a custom-fitted foam windscreen.\u003c\/p\u003e\u003cp\u003eAttach the ZUM-2 to the pivoting mount and TPS-4 tripod, then position the microphone so its front faces the speaker. Connect the included 2-meter USB Type-C to Type-A cable from the microphone to a compatible PC or Mac, then select ZUM-2 as the input and output device in the computer sound settings. Plug the included headphones into the microphone's 3.5 mm output when direct monitoring of computer audio is desired.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669298831430,"sku":"ZUM2 Podcast Mic Pack","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71urIFTQgES.jpg?v=1784488837"},{"product_id":"mackie-em-carbon-premium-usb-condenser-microphone","title":"Mackie EM-Carbon Premium USB Condenser Microphone","description":"\u003cp\u003eThe Mackie EM-Carbon is a USB condenser microphone designed for recording, streaming, podcasting, voiceovers, interviews, and music creation. It connects directly to a computer through USB-C, avoiding the need for a separate audio interface for basic recording setups. Its included desktop stand and plug-and-play operation make it suitable for creators building a practical desktop recording system.\u003c\/p\u003e\u003cp\u003eThis side-address microphone uses a 14 mm condenser capsule and supports a 20 Hz to 20 kHz frequency response. It is suited to capturing spoken voice, vocals, instruments, and room sound with a detailed full-range presentation. The 126 dB maximum input SPL also gives it capacity for louder sound sources when gain is set appropriately.\u003c\/p\u003e\u003cp\u003eFive selectable polar patterns let the EM-Carbon adapt to different recording situations. Cardioid is useful for a single speaker or vocalist, while bidirectional can serve two-person interviews from opposite sides of the microphone. Stereo, super-cardioid, and omnidirectional modes broaden its use for instruments, field capture, group discussions, and ambient recording.\u003c\/p\u003e\u003cp\u003eOnyx microphone preamp circuitry and 16-bit\/48 kHz digital audio conversion provide the microphone's USB recording path. Front-panel gain, mute, and headphone-volume controls keep key adjustments within reach. The dedicated headphone output allows direct monitoring from the microphone while also playing computer audio.\u003c\/p\u003e\u003cp\u003eThe EM-Carbon fits naturally into a computer-based content-creation setup and can be used on its included stand or a standard microphone stand. It includes a USB-C cable with a USB-A computer connection, helping simplify initial setup. Mackie also includes Waveform OEM software and the DAW Essentials plugin bundle for users starting a recording workflow.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive Polar Patterns:\u003c\/strong\u003e Select stereo, cardioid, figure-8, super-cardioid, or omnidirectional pickup for different sources and recording layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 mm Condenser Capsule:\u003c\/strong\u003e Captures voice, instruments, and other detailed sound sources across a 20 Hz to 20 kHz response range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Connectivity:\u003c\/strong\u003e Connects directly to a compatible computer with a class-compliant, driver-free USB audio connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnyx Preamp Circuitry:\u003c\/strong\u003e Provides the microphone's integrated low-noise recording signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring:\u003c\/strong\u003e Use the 1\/8-inch stereo headphone jack and independent volume control for convenient listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard Controls:\u003c\/strong\u003e Gain, mute, polar-pattern, and headphone-volume controls support quick adjustments while recording.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EM-Carbon has a black, side-address microphone design with an integrated standard microphone stand mount. Mackie describes its construction as rugged; the manufacturer does not specify a housing material composition. A red internal LED illuminates when the microphone mute switch is engaged.\u003c\/p\u003e\u003cp\u003eFor setup, connect the USB-C end of the included cable to the microphone and the USB-A end directly to an available computer USB port. Mackie advises connecting directly to the computer rather than through a USB hub or keyboard port. Position the microphone so the intended source addresses the side of the microphone, then select the polar pattern and adjust gain for the recording task.\u003c\/p\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":45669382783046,"sku":"CARBON","price":245.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51kLnseXhwL.jpg?v=1784495700"},{"product_id":"mackie-em-usb-usb-condenser-microphone","title":"Mackie EM-USB USB Condenser Microphone","description":"\u003cp\u003eThe Mackie EM-USB is a USB condenser microphone designed to record directly to a computer without requiring a separate audio interface. It provides a straightforward recording solution for home studios, podcasts, livestreams, video calls, and online content creation. USB-C connectivity and onboard controls keep the setup focused and uncluttered.\u003c\/p\u003e\u003cp\u003eA cardioid, unidirectional pickup pattern concentrates on sound in front of the microphone while helping reduce pickup from the sides and rear. This makes the EM-USB well suited to single-person voice recording, spoken-word work, and close-miked musical ideas. Its 14 mm condenser capsule covers a 30 Hz to 18 kHz frequency response.\u003c\/p\u003e\u003cp\u003eBuilt-in gain control lets users adjust microphone input sensitivity at the mic, helping match its output to a computer or recording application. A dedicated mute switch turns off the microphone signal while computer playback can still be heard through connected headphones. The power and mute LED gives a clear visual indication of operating status.\u003c\/p\u003e\u003cp\u003eThe integrated headphone output supports direct monitoring and computer playback through stereo headphones with a 1\/8-inch connector. Its independent headphone level control makes it easier to set a comfortable listening level without adjusting the computer's main output. With up to 400 mW of stereo output power, the EM-USB combines microphone and monitoring functions in one desktop-friendly device.\u003c\/p\u003e\u003cp\u003eThe EM-USB fits naturally into a compact creator setup, connecting to a computer through the included USB-C-to-USB-A cable. A tripod stand and mic clip are included for immediate desktop placement, while the mic clip can also support compatible stand or boom-mount use. Waveform OEM recording software and the DAW Essentials plugin bundle are included for users building a recording workflow.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Recording Interface:\u003c\/strong\u003e Connects directly to a computer for USB audio recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 mm Condenser Capsule:\u003c\/strong\u003e Captures detailed voice and instrument recordings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Pickup Pattern:\u003c\/strong\u003e Focuses on the source in front of the mic.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring:\u003c\/strong\u003e Provides a 1\/8-inch headphone output with level control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain And Mute Controls:\u003c\/strong\u003e Adjust input sensitivity and silence the microphone quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Desktop Accessories:\u003c\/strong\u003e Comes with a tripod stand, mic clip, and USB cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EM-USB uses a compact, rugged microphone body intended for regular desktop and portable recording use. Its controls and connections are placed on the microphone itself, including the USB-C port, headphone jack, headphone level knob, gain knob, mute switch, and status LED. The microphone measures 7.1 inches high by 1.8 inches wide and weighs 0.87 lb.\u003c\/p\u003e\u003cp\u003eFor setup, connect the included USB-C end of the cable to the microphone and the USB-A end directly to an available computer USB port. Connect stereo headphones with a 1\/8-inch plug for monitoring, then select the EM-USB as the computer's input and output device when needed. Use the included tripod stand for desktop recording, or use the supplied mic clip with a compatible microphone stand or boom.\u003c\/p\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":45669387370566,"sku":"EM-USB","price":268.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61fSJHzq_ZL.jpg?v=1784497145"},{"product_id":"se-electronics-neom-usb-cardioid-usb-condenser-microphone","title":"sE Electronics NEOM USB Cardioid USB Condenser Microphone","description":"\u003cp\u003eThe sE Electronics NEOM USB is a plug-and-play USB condenser microphone for recording, streaming, podcasting, voice chat, and mobile content creation. Its integrated USB audio interface connects directly to compatible computers and mobile devices without requiring a separate microphone preamp or audio interface. It is designed for creators who want a compact desktop recording solution with direct headphone monitoring.\u003c\/p\u003e\u003cp\u003eA 16 mm back-electret condenser capsule and cardioid pickup pattern focus capture toward the front of the microphone while reducing sound arriving from the sides and rear. This makes the NEOM USB suited to close-miked speech, vocals, acoustic instruments, and other single-source recording tasks. The microphone is side-addressed, so the speaker or performer addresses the front surface above the controls rather than the top.\u003c\/p\u003e\u003cp\u003eThe integrated converter supports 24-bit recording and sample rates up to 192 kHz. Lower supported rates are also available for typical recording and streaming workflows, including 44.1 kHz and 48 kHz. For most applications, sE recommends using 48 kHz at 24-bit resolution.\u003c\/p\u003e\u003cp\u003eFront-panel controls make it possible to set microphone gain and create a personal headphone balance without changing the signal heard by an audience. Separate Mic Level and Playback Level controls adjust the direct microphone signal and computer playback in the headphone mix. A rear 1\/8-inch headphone output provides direct monitoring, while the illuminated sE logo functions as a mute button.\u003c\/p\u003e\u003cp\u003eThe NEOM USB includes a metal desktop stand, microphone clip, thread adapter, and USB-C to USB-A cable for a ready-to-use desktop setup. The clip can be removed for use with a full-size microphone stand, making the microphone adaptable to a desk, boom arm, or studio stand. For mobile and USB-C host devices, the appropriate USB-C, Lightning, or micro-USB cable or adapter may be needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 mm Cardioid Capsule:\u003c\/strong\u003e Captures a focused front-facing source while reducing pickup from the sides and rear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit \/ 192 kHz Audio:\u003c\/strong\u003e Supports high-resolution digital recording through its built-in USB audio interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Headphone Monitoring:\u003c\/strong\u003e The 1\/8-inch headphone output lets users monitor from the microphone rather than computer audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent Monitor Mix:\u003c\/strong\u003e Mic Level and Playback Level controls adjust the headphone blend independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Connectivity:\u003c\/strong\u003e Connects to compatible Mac, Windows, iOS, and Android devices with suitable cables or adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Shock Isolation:\u003c\/strong\u003e The internally mounted capsule helps reduce rumble and handling-related vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe NEOM USB combines a 16 mm back-electret condenser capsule with an internal shock-mount system in a compact side-address microphone body. Its included desktop stand is metal and uses rubber feet to help minimize vibration transfer from the desk. The microphone also provides an LED gain indication and a logo-mounted mute control for clear operational feedback.\u003c\/p\u003e\u003cp\u003eConnect the microphone to a compatible USB-equipped computer or mobile device, then select it as the input and output device in the recording or streaming software as needed. Use the included USB-C to USB-A cable for USB-A hosts; USB-C, Lightning, or micro-USB devices require the appropriate cable or adapter. Position the front of the microphone about 6 inches from the speaker or singer, set gain so the LED does not flash red, and use a pop filter when recording vocals if desired.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669431377990,"sku":"NEOM USB","price":95.38,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71JqASMCXqL.jpg?v=1784502516"}],"url":"https:\/\/audiowatt.store\/collections\/usb-microphones.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}