{"title":"Tweeters","description":null,"products":[{"product_id":"audiobank-ad36tw-4-inch-super-tweeter-speaker","title":"Audio360 AD36TW 4-Inch Super Tweeter Speaker","description":"\u003cp\u003eThe AUDIO360 AD36TW is a 4-inch super tweeter designed to add high-frequency detail to a car-audio system. It is a 4-ohm speaker with a published frequency range of 2 kHz to 20 kHz. This makes it suited to systems that need a dedicated driver for upper-frequency reproduction alongside midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eWith a published sensitivity of 105 dB, the AD36TW is intended for applications where efficient high-frequency output is important. Its 1,800-watt maximum-power specification identifies it as a pro-car-audio-oriented component, while no RMS power rating is published. Match the speaker with compatible amplification and system tuning rather than selecting equipment from maximum-power figures alone.\u003c\/p\u003e\u003cp\u003eThe AD36TW uses a titanium diaphragm and a CCAW voice coil. Titanium is specified for the diaphragm material, while CCAW refers to copper-clad aluminum wire in the voice coil. These published construction details distinguish the driver from basic paper- or polymer-diaphragm tweeters.\u003c\/p\u003e\u003cp\u003eThis super tweeter is a practical choice for enthusiasts building a multi-driver setup that needs more presence in the upper frequencies. Its 4-ohm nominal impedance allows it to be considered for amplifiers or passive networks designed for 4-ohm speaker loads. The published 2 kHz to 20 kHz range provides a useful starting point when planning system crossover points.\u003c\/p\u003e\u003cp\u003eThe 12.3-ounce magnet specification supports the AD36TW's dedicated high-frequency-driver design. Use it as part of a properly configured car-audio system rather than as a full-range replacement speaker. Because published mounting measurements and included accessories are not available, confirm physical fitment and installation hardware before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Supports matching with compatible 4-ohm amplifier or crossover channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800W Maximum Power:\u003c\/strong\u003e Published maximum-power handling for pro-car-audio system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the rated speaker input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD36TW combines a titanium diaphragm, CCAW voice coil, and a published 12.3-ounce magnet. It is specified as a 4-inch tweeter with a 4-ohm nominal impedance. The design is focused on reproducing the upper portion of a multi-speaker car-audio system's frequency range.\u003c\/p\u003e\u003cp\u003eInstall the AD36TW only with equipment appropriate for a 4-ohm tweeter and configure the system so the speaker is used within its published 2 kHz to 20 kHz range. An appropriate crossover or high-pass arrangement should be selected as part of the overall system design; no crossover is specified as included. Verify available mounting depth, cutout requirements, wiring hardware, and package contents with the seller or installer before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613780926534,"sku":"AD36TW","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61UsGYKeH-L.jpg?v=1784350819"},{"product_id":"audio360-ad43tw-4-72-led-super-tweeter","title":"Audio360 AD43TW 4.72\" LED Super Tweeter","description":"\u003cp\u003eThe Audio360 AD43TW is a 4.72-inch super tweeter designed to add focused high-frequency output to car and marine audio systems. It is intended for listeners building systems that need more treble presence, detail, and projection than conventional full-range speakers alone provide. Its 4-ohm nominal impedance supports integration with appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eCovering a stated 2 kHz to 18 kHz frequency range, the AD43TW is built to reproduce the upper-frequency information that helps instruments, vocals, and percussion remain distinct in a high-output system. Its 106 dB sensitivity rating indicates efficient output from relatively modest amplifier power. The result is a forward, detailed high-frequency character suited to custom audio installations.\u003c\/p\u003e\u003cp\u003eThe AD43TW uses a phenolic diaphragm and a CCAW voice coil. This material combination is specified for durable operation and responsive high-frequency reproduction. A 16.9-ounce magnet supports the tweeter assembly for stable performance.\u003c\/p\u003e\u003cp\u003eFull LED lighting is integrated into the design, adding a visual element for installations where appearance is part of the build. The lighting offers different lighting options according to the product listing. This makes the AD43TW a practical fit for custom vehicle and marine setups that combine audio upgrades with illuminated trim.\u003c\/p\u003e\u003cp\u003eUse the AD43TW as part of a properly designed multi-speaker system, rather than as a replacement for midrange or bass drivers. Pair it with compatible amplification and suitable high-frequency filtering to keep the tweeter operating within its stated frequency range. Its compact 4.72-inch format can suit custom panels, pods, and other dedicated tweeter locations where installation space allows.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.72-Inch Super Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency output in a compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W Maximum Power:\u003c\/strong\u003e Provides stated peak power-handling capacity for high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible car or marine amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps produce efficient and prominent treble output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Provides the specified durable diaphragm construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull LED Lighting:\u003c\/strong\u003e Adds illuminated styling with different lighting options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD43TW combines a phenolic diaphragm, CCAW voice coil, and 16.9-ounce magnet in a compact super-tweeter design. Its full LED treatment gives it a distinct appearance for visible custom installations. The product is specified for car and marine audio use.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting space before installation; the product is listed as 4.72 inches, while the overall packaged\/product dimensions are listed as 5 x 5 x 5 inches. Connect it only to an amplifier configuration compatible with a 4-ohm speaker load, and use appropriate crossover or high-pass protection for a super tweeter. Plan LED wiring separately from speaker wiring and follow the supplied product instructions where available.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613830504518,"sku":"AD43TW","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61G2qkQsifL.jpg?v=1784350841"},{"product_id":"audiobank-ad44tw-3-93-super-tweeter-speakers","title":"Audio360 AD44TW 3.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Audio360 AD44TW is a 3.93-inch super tweeter pair designed to add dedicated high-frequency output to a car-audio system. It is suited to builds that need more presence and detail in the upper-frequency range than full-range speakers alone can provide. With a 4-ohm nominal impedance, the pair is intended for use in wired automotive audio installations.\u003c\/p\u003e\u003cp\u003eEach AD44TW is rated for up to 2200 watts maximum power, for a listed 4400-watt total maximum power rating for the pair. Its 106 dB sensitivity specification supports strong output from comparatively modest amplifier power when the system is set up correctly. The stated 1.5 kHz to 20 kHz frequency range focuses this driver on upper midrange and treble reproduction.\u003c\/p\u003e\u003cp\u003eA PEI diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAR. This material combination is intended to support consistent high-frequency reproduction in a car-audio environment. The 13-ounce magnet specification contributes to the driver assembly's structure and stability.\u003c\/p\u003e\u003cp\u003eThe AD44TW is a practical choice for enthusiasts building a louder, more detailed multi-speaker system. It can complement dedicated midrange drivers, coaxial speakers, and a properly configured amplifier system. Because it is a super tweeter, it is best used as part of a frequency-managed setup rather than as a stand-alone full-range speaker.\u003c\/p\u003e\u003cp\u003eFor a matched left-and-right installation, this listing includes two AD44TW super tweeters. Their compact 3.93-inch size can suit custom panels, doors, pillars, or other suitable locations when adequate mounting space is available. Final output and tonal balance depend on proper crossover selection, amplifier matching, and careful level setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.93-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2200W Maximum Per Tweeter:\u003c\/strong\u003e Supports high-output system planning when properly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps the tweeters produce strong output efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Ounce Magnet:\u003c\/strong\u003e Adds mass to the driver motor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD44TW uses a PEI diaphragm and a CCAR voice coil in a compact super-tweeter format. Each driver is specified with a 13-ounce magnet and a 3.93-inch speaker size. The black, wired design is intended for automotive audio use.\u003c\/p\u003e\u003cp\u003eInstall the pair in a secure location with appropriate clearance for the mounting arrangement and wiring. Use a suitable high-pass crossover or other frequency-management method to keep low-frequency content out of the tweeters, and match the amplifier and crossover to the 4-ohm load. Confirm polarity between left and right speakers, then set gain conservatively to integrate their output with the rest of the system.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613888274502,"sku":"AD44TW","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71q0Do52zVL.jpg?v=1784350865"},{"product_id":"audio360-ad48tw-5-49-super-tweeter","title":"Audio360 AD48TW 5.49\" Super Tweeter","description":"\u003cp\u003eThe Audio360 AD48TW is a high-frequency super tweeter designed to add upper-range detail to a car or marine audio system. It is intended for listeners building systems that need dedicated treble reproduction beyond what larger speakers or subwoofers provide. The requested configuration includes two AD48TW tweeters for left- and right-channel use.\u003c\/p\u003e\u003cp\u003eEach AD48TW is rated at 4 ohms and listed with 2,500 watts maximum power handling, for 5,000 watts total maximum handling across the pair. Its 107 dB sensitivity rating indicates efficient output from comparatively modest amplifier power. The stated 2 kHz to 20 kHz frequency range focuses the driver on upper-midrange and high-frequency duties.\u003c\/p\u003e\u003cp\u003eA phenolic diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are part of the driver design specified for this model. A 15.2-ounce magnet is also listed for each tweeter.\u003c\/p\u003e\u003cp\u003eThe AD48TW is suited to systems using separate low-, mid-, and high-frequency drivers rather than as a replacement for a full-range speaker. It can complement midrange speakers and subwoofers by handling the upper portion of the audible frequency range. Its wired connection format makes it appropriate for conventional amplified car-audio speaker wiring.\u003c\/p\u003e\u003cp\u003eThis model is listed for car and marine audio applications, giving installers flexibility when selecting a high-frequency driver for a vehicle or boat system. Proper system matching remains important because the 4-ohm load must be compatible with the amplifier channel and crossover arrangement. The product is listed as a super tweeter, so it should be integrated as part of a multi-driver system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Tweeter Design:\u003c\/strong\u003e Adds dedicated high-frequency output to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifier channels designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with appropriate system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers upper-midrange and treble frequencies specified for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Uses the specified phenolic material for the diaphragm assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD48TW uses a phenolic diaphragm, CCAW voice coil, and a listed 15.2-ounce magnet. Its published overall size is 5.49 by 4.72 inches, placing it in the large-format super-tweeter category. The model is specified as a wired dynamic-driver tweeter for automotive and marine-oriented audio applications.\u003c\/p\u003e\u003cp\u003eMount the pair where their high-frequency output can be directed toward the listening area and where the 5.49 by 4.72-inch footprint can be accommodated. Connect each tweeter to an amplifier or speaker circuit compatible with a 4-ohm load, and use an appropriate crossover or high-pass arrangement so the driver operates within its listed 2 kHz to 20 kHz frequency range. Confirm available mounting clearance and system wiring before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613945684038,"sku":"AD48TW","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61FX_9_-5SL.jpg?v=1784350890"},{"product_id":"audiotek-atw460bk-1-600w-titanium-super-tweeter","title":"Audiotek ATW460BK 1\" 600W Titanium Super Tweeter","description":"\u003cp\u003eThe Audiotek ATW460BK is a 1-inch car-audio super tweeter designed to add upper-frequency output to an amplified speaker system. It is intended for listeners who want more definition and projection from vocals, percussion, and other high-frequency details than typical factory speakers provide. Its 8-ohm impedance makes it important to match the tweeter with compatible amplification and system wiring.\u003c\/p\u003e\u003cp\u003eThis is a dedicated high-frequency driver rather than a full-range speaker or a direct replacement for a complete door-speaker system. The rated frequency response begins at 3,000 Hz and extends to 25,000 Hz, supporting use above midrange drivers or woofers. A built-in capacitor filter is specified to help limit low-frequency content sent to the tweeter.\u003c\/p\u003e\u003cp\u003eThe ATW460BK is specified with a 600-watt maximum power rating and 100 dB sensitivity. Its output character is intended for systems where clear, forward high frequencies are needed to complement bass and midrange drivers. Because it is a super tweeter, it is most appropriate as part of a multi-speaker setup with a properly planned crossover approach.\u003c\/p\u003e\u003cp\u003eA die-cast aluminum frame provides the mounting structure, while the listed diaphragm composition is aluminum. The product is also described as a titanium super tweeter design with a bullet-style center section. This bullet configuration is intended to protect the voice-coil area while supporting focused high-frequency dispersion.\u003c\/p\u003e\u003cp\u003eWith a 2-inch overall diameter and 2-7\/8-inch mounting depth, the ATW460BK can be considered for custom panels, speaker pods, and other locations with adequate rear clearance. Spade terminals are specified for straightforward speaker-wire connections. It is supplied as one tweeter with installation accessories listed in the package contents.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Super Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency output to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Rating:\u003c\/strong\u003e Handles the manufacturer-listed maximum power level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Ohm Impedance:\u003c\/strong\u003e Supports matching with compatible amplifier channels and crossover networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 kHz–25 kHz Response:\u003c\/strong\u003e Covers upper midrange and high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 dB Sensitivity:\u003c\/strong\u003e Designed for efficient output from suitable system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Capacitor Filter:\u003c\/strong\u003e Helps block lower frequencies from reaching the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ATW460BK uses a die-cast aluminum frame and is specified with an aluminum dome and aluminum voice coil. Its compact 1-inch tweeter format is paired with a bullet-style center design. The listed overall diameter is 2 inches, and the mounting depth is 2-7\/8 inches.\u003c\/p\u003e\u003cp\u003eUse this tweeter with a compatible high-frequency signal path and amplification suited to an 8-ohm load. Confirm mounting clearance before installation, especially behind custom panels or pods. Connect using its spade terminals, observe speaker polarity, and avoid sending low-frequency bass content to the tweeter.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614201372742,"sku":"ATW450S","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71euHnLb5QL.jpg?v=1784360759"},{"product_id":"audison-ap1p-1-14-tweeter-component-with-crossover","title":"Audison AP1P 1.14\" Tweeter Component with Crossover","description":"\u003cp\u003eThe Audison AP1P is a 29 mm (1.14 in.) car-audio tweeter component designed to add focused high-frequency reproduction to a component speaker system. It is intended for factory-system upgrades and custom installations where fitment flexibility is important. The supplied APCX P 2T passive crossover provides the required high-pass filtering for the tweeter.\u003c\/p\u003e\u003cp\u003eWith an 8-ohm nominal impedance and 92 dB sensitivity, the AP1P is engineered for integration with compatible component-system amplification and crossover networks. Its published frequency response extends from 1.2 kHz to 25 kHz. A Tetolon fibre dome and 25 mm CCAW voice coil support detailed upper-frequency output with low moving mass.\u003c\/p\u003e\u003cp\u003eAudison uses a double-Neodymium magnetic group in the AP1P motor assembly. This design is paired with a dome profile optimized through FEM simulations for broad off-axis dispersion. That makes the tweeter well suited to locations such as factory sail panels, dash positions, and A-pillars where listening angles can vary.\u003c\/p\u003e\u003cp\u003eAIF, or Any Install Faceplate, gives the AP1P three faceplate options for different installation approaches. The OEM faceplate supports factory-style placement, while mesh and spoke grille options are intended for A-pillar applications. This flexibility helps an installer select a finish and protection level appropriate to the mounting location.\u003c\/p\u003e\u003cp\u003eThe included APCX P 2T crossover is a 12 dB\/octave high-pass network with a 4 kHz crossover point. Its selectable tweeter-level setting offers 0 dB or +3 dB adjustment for system tuning. The AP1P is a practical match for a compatible midrange or woofer section in an Audison Prima-style two-way front-stage upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tweeter:\u003c\/strong\u003e Compact 1.14-inch format supports flexible vehicle placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplates:\u003c\/strong\u003e Three faceplate styles accommodate OEM and custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Neodymium Motor:\u003c\/strong\u003e Supports extended high-frequency performance in a compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Lightweight coil construction supports dynamic high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fibre Dome:\u003c\/strong\u003e Dome material is designed for accurate upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX P 2T Crossover:\u003c\/strong\u003e Included high-pass network provides 4 kHz, 12 dB\/octave filtering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP1P combines a Tetolon fibre dome, 25 mm CCAW voice coil, and double-Neodymium magnetic group in a compact tweeter assembly. Its faceplate system includes OEM, mesh-grille, and spoke-grille options, allowing the cosmetic finish and acoustic opening to be matched to the mounting position. Audison specifies a 22 x 2.5 mm Neodymium magnet size and a tweeter weight of 0.067 kg.\u003c\/p\u003e\u003cp\u003eUse the AP1P with its supplied APCX P 2T passive crossover rather than connecting it directly to a full-range signal. The crossover is specified as a 4 kHz, 12 dB\/octave high-pass design and provides 0 dB or +3 dB tweeter-level adjustment. Confirm available mounting clearance against the listed AP1P and faceplate dimensions, and use the supplied mounting hardware appropriate to the selected OEM, flush, or angled installation method.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217003078,"sku":"AP1P","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UD2jVAaHL.jpg?v=1784361764"},{"product_id":"audison-av1-1ii-1-1-tweeter-set","title":"Audison AV1-1II 1.1\" Tweeter Set","description":"\u003cp\u003eThe Audison AV1-1II is a pair of 28 mm (1.1 in.) Voce II component tweeters designed to upgrade the high-frequency range of a car audio system. It is intended for systems that need clearer treble detail, more controlled upper-frequency output, and flexible mounting options. With a 4-ohm nominal impedance, the AV1-1II is suited to appropriately configured aftermarket speaker systems.\u003c\/p\u003e\u003cp\u003eIts Hi-Res Audio certification and 1,000 to 40,000 Hz frequency-response specification support extended high-frequency playback. The larger 28 mm Tetolon soft dome is designed to provide smooth, natural treble character while maintaining useful off-axis response in vehicle cabins. This makes it a practical choice for dash, sail-panel, or A-pillar locations where listeners are not directly on-axis with the tweeters.\u003c\/p\u003e\u003cp\u003eA 28 mm CCAW voice coil is wound on an aluminum former and paired with a neodymium magnetic motor. This combination is engineered for low moving mass, thermal stability, and controlled transient response. Audison specifies a 900 Hz resonant frequency and 91 dB sensitivity for the AV1-1II.\u003c\/p\u003e\u003cp\u003eThe AV1-1II uses Audison AIF (Any Install Faceplate) technology to support different mounting approaches. Included mounting hardware includes a watch-band mount, double-angle cup, flush-mounting ring, and metal mounting spring. Mesh and spoke grille options provide additional installation and appearance flexibility.\u003c\/p\u003e\u003cp\u003eFor an active DSP-based system, Audison recommends high-pass filtering the AV1-1II as low as 1,800 Hz with a 24 dB\/octave Linkwitz-Riley slope when paired in a two-way system with a 6.5-inch woofer. When used with a smaller midrange such as the AV 3.0 II, Audison recommends a crossover point around 3,000 Hz. The tweeters can also be used as part of compatible Voce II passive or active component-system configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certified:\u003c\/strong\u003e Supports extended response up to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Dome:\u003c\/strong\u003e Delivers smooth and natural high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Helps reduce moving mass and dynamic compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Provides a compact, high-flux magnetic assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplate System:\u003c\/strong\u003e Supports multiple mounting and aiming options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Grade Connector:\u003c\/strong\u003e Enables convenient serviceable wiring connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV1-1II combines a Tetolon-fibre dome and surround with a 28 mm CCAW voice coil, aluminum former, and neodymium magnet. It does not use ferrofluid. The supplied faceplates, mounting accessories, grille options, pre-wired P\u0026amp;P cable, and Audison logo badges support a tailored installation.\u003c\/p\u003e\u003cp\u003eUse the included flush ring, watch-band mount, double-angle cup, or metal spring according to the available vehicle location and desired aiming. The tweeter provides standard terminals plus an OEM-grade two-pin connection, with a matching bare-wire pigtail included for connection by solder or mechanical crimp. Use an appropriate high-pass crossover; for active DSP systems, Audison recommends 1,800 Hz at 24 dB\/octave in a two-way alignment with a 6.5-inch woofer.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614237155398,"sku":"AV1-1II","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81zalMdi5RL.jpg?v=1784363486"},{"product_id":"cerwin-vega-vt1-1-silk-dome-tweeters","title":"Cerwin-Vega VT1 1\" Silk Dome Tweeters","description":"\u003cp\u003eThe Cerwin-Vega VT1 is a pair of 1-inch silk dome tweeters designed to add dedicated high-frequency detail to a vehicle audio system. It is intended for listeners upgrading dull, incomplete, or damaged factory treble reproduction. The pair uses a 4-ohm design and includes external crossovers for a more complete add-on tweeter installation.\u003c\/p\u003e\u003cp\u003eSilk dome construction gives the VT1 a smooth high-frequency character intended to reproduce vocal detail, cymbals, and upper musical textures with clarity. Its specified frequency response is 91 Hz to 20 kHz, with 90 dB sensitivity measured at 1W\/1M. The tweeters are rated for 60 watts RMS and 180 watts peak power handling each.\u003c\/p\u003e\u003cp\u003eA neodymium magnet motor structure supports the compact VT1 design while providing the magnetic drive needed for high-frequency playback. Cerwin-Vega identifies the tweeter as a dynamically balanced dome design. The supplied external crossover includes tweeter protection to help manage the high-frequency signal sent to each tweeter.\u003c\/p\u003e\u003cp\u003eThe VT1 is suited to custom car-audio systems, replacement installations, and upgrades that need dedicated highs alongside compatible midrange or full-range speakers. With 4-ohm impedance per tweeter, it should be matched to an amplifier or head-unit speaker output designed for that load. Proper crossover wiring and polarity are important for balanced integration with the rest of the system.\u003c\/p\u003e\u003cp\u003eInstallation flexibility allows the tweeters to be used in surface-mount or flush-mount locations where space permits. Their compact 2.40-inch overall diameter and 0.846-inch mounting depth can suit many dash, door, or rear-deck applications. Confirm the available mounting area, clearance, and wiring path before beginning installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Reproduces detailed high frequencies with a smooth tonal character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Supports compact, efficient tweeter motor performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Rating:\u003c\/strong\u003e Provides continuous power handling per tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common car-audio speaker-output configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct high-frequency signal to the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Protection:\u003c\/strong\u003e Helps protect the tweeters through the included crossovers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VT1 uses a balanced silk dome diaphragm and neodymium magnet motor structure in a compact 1-inch tweeter format. Each unit has a 2.40-inch overall diameter, 1.14-inch overall height, and 0.846-inch mounting depth. The set is supplied as a pair and does not include grilles according to the published specification.\u003c\/p\u003e\u003cp\u003eFor surface mounting, position the supplied mounting cup at the desired angle and route the speaker wire through the cup before securing the tweeter. For flush mounting, verify panel clearance and opening requirements before cutting; the installation guide calls for at least 1 inch of clearance behind the panel for the flush-mount arrangement. Connect each passive crossover input to the amplifier speaker output and its tweeter output to the corresponding VT1, observing positive and negative polarity.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45620281081926,"sku":"CER-VT1","price":101.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Fg_Puco5L.jpg?v=1784370881"},{"product_id":"gravity-g-220tw-1-silk-dome-tweeters","title":"Gravity G-220TW 1\" Silk Dome Tweeters","description":"\u003cp\u003eThe Gravity G-220TW is a 1-inch car-audio dome tweeter set designed to add dedicated high-frequency reproduction to a vehicle sound system. It is intended for listeners building or refreshing a speaker system that needs clearer treble detail beyond what larger drivers typically reproduce. The compact tweeter format makes it suitable for custom installations and component-style upgrades.\u003c\/p\u003e\u003cp\u003eIts silk-dome design is made for smooth reproduction of upper-frequency content such as vocals, cymbals, strings, and ambient details. By assigning treble information to dedicated tweeters, a system can better separate high-frequency material from midrange and bass duties. The result depends on the vehicle, mounting location, crossover setup, and supporting equipment.\u003c\/p\u003e\u003cp\u003eThe G-220TW is rated for 300 watts maximum power and uses a neodymium magnet. Neodymium allows a compact motor structure, which is useful in tweeter applications where installation space can be limited. The product is specified as a wired vehicle speaker component rather than a standalone amplified audio system.\u003c\/p\u003e\u003cp\u003eThese tweeters are a practical fit for car-audio systems using compatible midrange speakers, coaxial speakers, or subwoofers. They can be considered when replacing damaged tweeters or adding high-frequency drivers to a custom front-stage setup. Correct frequency protection and power matching should be determined by the installer or system designer.\u003c\/p\u003e\u003cp\u003eThe G-220TW is sold as a pair in retail listings, providing left- and right-channel tweeters for a stereo installation. Its 1-inch dome size supports compact placement in suitable factory locations, custom panels, or other purpose-built mounting positions. Verify available space, mounting method, and wiring requirements before purchase or installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact tweeter format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Maximum Rating:\u003c\/strong\u003e Supplies a published maximum-power figure for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Uses a compact magnetic motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Audio Application:\u003c\/strong\u003e Intended for wired car-audio speaker installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Retail listings identify the product as a stereo pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor:\u003c\/strong\u003e Supports installation where larger speakers will not fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-220TW combines a silk dome with a neodymium magnet assembly in a compact tweeter design. Retail information identifies a black and metallic appearance, while the product is classified as a vehicle tweeter. Its small 1-inch driver size is intended for installations where high-frequency drivers need minimal mounting space.\u003c\/p\u003e\u003cp\u003eUse the G-220TW as part of a compatible left\/right car-audio system, with mounting locations selected for fit and desired sound staging. Confirm the available mounting dimensions and use appropriate wiring, crossover protection, and amplifier or head-unit settings for the rest of the system. Manufacturer-confirmed impedance, crossover point, mounting cutout, mounting depth, and included mounting hardware specifications were not located.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625104924742,"sku":"G-220TW","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91CjjUUmQBL.jpg?v=1784373814"},{"product_id":"gravity-g-230tw-1-inch-silk-dome-tweeters","title":"Gravity G-230TW 1-Inch Silk Dome Tweeters","description":"\u003cp\u003eThe Gravity G-230TW is a 1-inch dome tweeter set designed to add dedicated high-frequency reproduction to a vehicle audio system. It is intended for systems where factory speakers or larger aftermarket drivers need more definition in the upper-frequency range. Adding separate tweeters can help bring vocals, percussion, and fine musical details forward in the listening experience.\u003c\/p\u003e\u003cp\u003eThis model is suited to car-audio upgrades using compatible 4-ohm speaker outputs and a properly configured high-frequency crossover. Its listed 350-watt maximum power handling gives installers a reference point when selecting and setting up an amplifier. An RMS power rating is not confirmed, so amplifier matching should not be based on the maximum-power figure alone.\u003c\/p\u003e\u003cp\u003eThe G-230TW uses a 1-inch silk dome design with a neodymium magnet, according to available product listings. A silk dome is intended for smooth high-frequency playback, while the compact neodymium motor structure helps keep the tweeter installation footprint small. The result is a dedicated treble driver for complementing midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eThese tweeters are listed as a pair, making them appropriate for left- and right-channel front-stage installations. They can be used in common tweeter locations such as door sail panels, dashboards, A-pillars, or custom pods when space and vehicle safety systems allow. Proper placement and aiming can affect stereo imaging and perceived treble level.\u003c\/p\u003e\u003cp\u003eFor a complete upgrade, install the G-230TW set with the appropriate passive crossover or active high-pass filtering. This protects the tweeters from low-frequency content that they are not designed to reproduce. Careful gain setting, correct polarity, and conservative equalization are important for clean integration with the rest of the system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Power:\u003c\/strong\u003e Listed maximum-power capability for system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Suits compatible car-audio speaker outputs and crossover networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Supports a compact tweeter motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Supports left- and right-channel stereo installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Audio Design:\u003c\/strong\u003e Intended for aftermarket automotive sound-system upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-230TW combines a silk dome diaphragm with a neodymium magnet structure and a black metallic appearance. Its compact 1-inch format is designed for use where a dedicated tweeter can be mounted without the space requirements of a larger speaker. Available listings identify it as a wired automotive tweeter set.\u003c\/p\u003e\u003cp\u003eUse a suitable crossover or high-pass filter between the amplifier or head-unit speaker output and each tweeter. Confirm mounting depth, cutout requirements, and clearance behind the selected location before modifying a door panel, dash, or trim piece. Maintain polarity from source to crossover to tweeter, secure all wiring, and avoid excessive treble boost or amplifier gain.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625182683206,"sku":"G-230TW","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91HyjKbS7zL.jpg?v=1784373859"},{"product_id":"gravity-g-245tw-1-silk-dome-car-tweeter-kit","title":"Gravity G-245TW 1\" Silk Dome Car Tweeter Kit","description":"\u003cp\u003eThe Gravity G-245TW is a 1-inch silk dome car tweeter kit designed to add dedicated high-frequency reproduction to a vehicle audio system. It is intended for listeners who want clearer upper-range detail than full-range door speakers alone may provide. Its 4-ohm nominal impedance supports use in many aftermarket car-audio speaker systems.\u003c\/p\u003e\u003cp\u003eThis tweeter covers a stated 2 kHz to 30 kHz frequency range and has a stated sensitivity of 94 dB. The silk dome is designed for high-frequency playback, helping reproduce details such as vocals, percussion, and ambient information. It is a suitable addition when building a more complete front-stage speaker system.\u003c\/p\u003e\u003cp\u003eGravity rates the G-245TW for up to 300 watts maximum power handling. Maximum power is not the same as continuous RMS power, so amplifier selection and crossover settings should be made carefully. A properly configured high-pass signal is important when integrating any tweeter into a car audio system.\u003c\/p\u003e\u003cp\u003eA neodymium magnet supports the compact driver design, while the stamped steel basket is specified as anti-resonant. The tweeter uses spade speaker terminals for a direct wired connection. These features support practical installation in custom and replacement speaker locations.\u003c\/p\u003e\u003cp\u003eThe included flush and swivel mounting options allow the G-245TW to be positioned for the installation layout and desired listening direction. It can be used in locations such as doors, dash panels, sail panels, or custom enclosures when space and mounting dimensions permit. Pair it with compatible midrange or full-range speakers to divide the audio spectrum across dedicated drivers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Provides dedicated reproduction of upper-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–30 kHz Response:\u003c\/strong\u003e Covers a broad stated high-frequency operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Integrates with many aftermarket car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Supports a compact tweeter motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush and Swivel Mounts:\u003c\/strong\u003e Gives installers placement and aiming flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-245TW combines a silk dome diaphragm, neodymium magnet, and anti-resonant stamped steel basket. Its black finish and compact 1-inch dome format suit a range of vehicle-interior installation locations. Spade terminals provide a straightforward connection point for speaker wire.\u003c\/p\u003e\u003cp\u003eChoose either the flush-mount or swivel-mount hardware based on the panel location and preferred sound direction. Confirm available mounting clearance before cutting or drilling, and observe polarity when wiring the tweeters. Use the tweeters with an appropriate high-pass crossover or filtered signal; a crossover is not confirmed as included with this kit.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625248055366,"sku":"G-245TW","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81DI8ENelRL.jpg?v=1784373897"},{"product_id":"gravity-g-250tw-1-premium-dome-tweeters","title":"Gravity G-250TW 1\" Premium Dome Tweeters","description":"\u003cp\u003eThe Gravity G-250TW is a pair of 1-inch premium dome tweeters designed to add dedicated high-frequency reproduction to a car audio system. They are intended for listeners upgrading a factory speaker setup or completing a component-style speaker installation. Their compact size supports placement in common tweeter locations where clearer upper-frequency detail is desired.\u003c\/p\u003e\u003cp\u003eWith a published 2 kHz to 30 kHz frequency response and 94 dB sensitivity, these tweeters are specified for reproducing high-frequency content such as vocals, cymbals, and spatial details. The 4-ohm impedance allows them to be considered alongside other 4-ohm car-audio speaker components. Their 350W maximum-power rating is a maximum specification rather than a stated RMS rating.\u003c\/p\u003e\u003cp\u003eThe G-250TW uses a silk dome diaphragm and a 25 mm voice coil. This combination is paired with a high-density neodymium magnet assembly, a compact magnet type commonly used where installation space is limited. Ferrofluid cooling is also specified to support thermal management at the tweeter assembly.\u003c\/p\u003e\u003cp\u003eGravity lists tweeter protection as part of the product specification. The design is also described with a two-way mounting system, giving installers a choice between flush mounting and angled mounting. This flexibility can help accommodate different panel layouts and listening-position requirements.\u003c\/p\u003e\u003cp\u003eThese tweeters are suited to systems that need a dedicated high-frequency driver rather than relying only on full-range door speakers. Use them with system components selected for their published 4-ohm impedance and high-frequency operating range. Because crossover, wiring, and amplifier specifications are not documented in the available product data, confirm those details with the seller or installer before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Compact dome tweeter design for dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W Maximum Power:\u003c\/strong\u003e Published maximum-power specification for the pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car-audio speaker-system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e High-density magnet design in a compact tweeter assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrofluid Cooling:\u003c\/strong\u003e Specified cooling feature for the tweeter motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Mounting:\u003c\/strong\u003e Supports flush installation or angled mounting placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-250TW combines a silk dome, 25 mm voice coil, high-density neodymium magnet, and ferrofluid cooling in a compact 1-inch tweeter format. Gravity also lists tweeter protection and a 4-ohm impedance rating. The product is sold as a pair of tweeters.\u003c\/p\u003e\u003cp\u003eChoose either the flush or angled mounting option according to the available panel location and intended listening direction. Check the vehicle panel and mounting location before cutting or drilling, since published cutout and mounting-depth dimensions were not available. Confirm compatible crossover, wiring, amplifier, and installation-hardware requirements separately, as those items are not specified in the available product data.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625719947334,"sku":"G-250TW","price":35.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/9187VrVd3CL.jpg?v=1784374239"},{"product_id":"hertz-c26-1-cento-series-component-tweeters","title":"Hertz C26 1\" Cento Series Component Tweeters","description":"\u003cp\u003eThe Hertz C26 is a pair of 1-inch component tweeters designed to add dedicated upper-frequency reproduction to a car audio system. They are intended for systems that need clearer high-frequency detail than a full-range door speaker alone can provide. With a 4-ohm nominal impedance, the C26 is suited to compatible component-speaker and amplified-system installations.\u003c\/p\u003e\u003cp\u003eA 26 mm Tetolon dome and 20 mm voice coil form the acoustic core of the C26. This design is specified for detailed, natural reproduction through the mid-high and high-frequency range. Its published response extends from 1.8 kHz to 22.5 kHz, helping it cover the frequencies commonly assigned to a dedicated tweeter.\u003c\/p\u003e\u003cp\u003eThe C26 uses a neodymium magnet assembly, which allows a compact physical format for installation in factory-style locations or custom panels. Hertz specifies a 92 dB SPL sensitivity, supporting use with appropriately matched component systems. The tweeter is rated for 120 watts peak power when high-pass filtered at 2.5 kHz with a 12 dB-per-octave slope.\u003c\/p\u003e\u003cp\u003eIts faceplate and dispersion design are engineered to support off-axis installations, an important consideration in dashboards, sail panels, and A-pillars where speakers may not point directly at the listener. The result is a practical option for installers seeking a compact tweeter with a controlled listening-area response. The 1-inch dome format also works well as part of a front-stage upgrade using separate woofers and a suitable crossover network.\u003c\/p\u003e\u003cp\u003eThe C26 is sold as a pair and is designed for component-system use rather than direct full-range operation. It can be installed in flush or wedge-mount configurations using the available mounting arrangements. For reliable operation, pair it with a properly selected high-pass crossover and amplification that are appropriate for its 4-ohm load and published power-handling condition.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 mm Tetolon Dome:\u003c\/strong\u003e Provides dedicated reproduction of mid-high and high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm Voice Coil:\u003c\/strong\u003e Supports the compact 1-inch tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Delivers magnetic strength in a small assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB SPL Sensitivity:\u003c\/strong\u003e Helps the tweeter work efficiently in matched systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.8 kHz–22.5 kHz Response:\u003c\/strong\u003e Covers a broad published high-frequency operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting Format:\u003c\/strong\u003e Supports flush and wedge-mount installation approaches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C26 combines a Tetolon dome diaphragm with a neodymium magnet and compact 20 mm voice coil. Each tweeter has a 44 mm overall outside diameter, a 38.5 mm cutout requirement, and a 9.1 mm mounting depth. The compact dimensions can be useful when adapting factory tweeter locations or building custom panels.\u003c\/p\u003e\u003cp\u003eUse the C26 as part of a properly crossed-over component system; Hertz specifies its 120-watt peak rating with a 2.5 kHz high-pass filter at 12 dB per octave. Confirm that the mounting location has clearance for its 20 mm overall height and 9.1 mm mounting depth. Flush mounting is appropriate for recessed locations, while wedge mounting can help aim the tweeter toward the listening area when placement allows.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631719866438,"sku":"C26","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71WGMt_9RQL.jpg?v=1784378270"},{"product_id":"hertz-c26oe-1-oem-component-tweeters","title":"Hertz C26OE 1\" OEM Component Tweeters","description":"\u003cp\u003eThe Hertz C26OE is a pair of 26 mm (1 in.) component tweeters designed for OEM-location car-audio upgrades. It addresses the need to add or replace high-frequency drivers while working within factory-style mounting locations. Each tweeter uses a 4-ohm design and includes installation-focused accessories for integration.\u003c\/p\u003e\u003cp\u003eIts soft Tetolon dome is intended to reproduce upper-frequency detail with a natural character. The 20 mm voice coil and neodymium motor support controlled response through the tweeter's specified 1.8 kHz to 22.5 kHz frequency range. With 92 dB SPL sensitivity, the C26OE can be paired thoughtfully with compatible front-stage components.\u003c\/p\u003e\u003cp\u003eHertz designed the C26OE faceplate geometry using FEM-based modeling for OEM-placement installations. This approach is intended to support a more linear response when the tweeter is mounted off-axis in factory locations such as dash or pillar positions. It is a practical option for installers building a cleaner-looking upgrade without adding prominent custom pods.\u003c\/p\u003e\u003cp\u003eThe included CCX 26 cable crossover is built into the wiring to reduce the space required for an OEM upgrade. Its 6 dB-per-octave high-pass filtering helps route appropriate high-frequency content to the tweeters. The tweeters are rated for 120 watts peak when high-pass filtered at 2.5 kHz with a 12 dB-per-octave filter.\u003c\/p\u003e\u003cp\u003eUse the C26OE as part of a properly filtered front-stage upgrade rather than as a full-range speaker. Its compact dimensions, low individual speaker weight, and OEM-oriented mounting hardware make it suited to vehicles with available factory tweeter positions. Confirm the available mounting space, wiring polarity, and crossover strategy before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 mm Tetolon Dome:\u003c\/strong\u003e Soft-dome diaphragm supports detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Compact motor structure supports controlled transient response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Oriented Geometry:\u003c\/strong\u003e FEM-designed faceplate supports off-axis factory-location installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Cable Crossover:\u003c\/strong\u003e Built-in filtering saves space in upgrade installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many car-audio amplifier and component-system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Accessories:\u003c\/strong\u003e Helps adapt the tweeters to OEM-style placements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C26OE combines a 26 mm soft Tetolon dome with a 20 mm voice coil and neodymium magnet. Each tweeter weighs approximately 0.037 kg (0.08 lb.), helping keep the assembly compact for confined factory locations. Hertz specifies a 19 x 3 mm magnet size and a shallow 17.7 mm physical dimension.\u003c\/p\u003e\u003cp\u003eInstall the pair in suitable factory tweeter locations and use the supplied CCX 26 in-line crossover cables as intended. Observe polarity and keep the tweeters high-pass filtered; Hertz specifies the 120 W peak rating with a 2.5 kHz, 12 dB-per-octave high-pass condition. Verify vehicle-specific mounting fitment before modifying trim panels or factory wiring.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631719899206,"sku":"C26OE","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Z5j7BznbL.jpg?v=1784378307"},{"product_id":"hertz-ml280-3-1-38-tetolon-dome-tweeters","title":"Hertz ML280-3 1.38\" Tetolon Dome Tweeters","description":"\u003cp\u003eThe Hertz ML280-3 is a pair of Mille Legend Series component tweeters designed to reproduce the upper-frequency detail that factory speakers and basic component systems can miss. Its 35 mm (1.38 in.) Tetolon fiber dome is intended for systems where clarity, extension, and controlled dispersion are important. With a 4-ohm nominal impedance, these tweeters are suited to properly designed aftermarket car-audio installations.\u003c\/p\u003e\u003cp\u003eThis model is for listeners building or refining a premium front stage with separate midrange or woofer drivers. Its 1 kHz to 28 kHz frequency-response specification and 92 dB sensitivity support detailed treble reproduction when paired with an appropriate crossover network. The low 900 Hz resonant frequency also gives installers flexibility when designing the high-pass crossover point.\u003c\/p\u003e\u003cp\u003eHertz uses a neodymium motor optimized through FEA magnetic-flux simulations to support transient control. An extremely pure copper short-circuit ring is incorporated to support high-frequency extension. The 28 mm voice coil and 28 mm effective radiating diameter complement the compact dome design.\u003c\/p\u003e\u003cp\u003eThe ML280-3 uses a Tetolon fiber dome geometry developed to reduce distortion and improve high-frequency dispersion. Its die-cast aluminum faceplate is profiled to support frequency response and off-axis performance. The frame structure and rear acoustic chamber are derived from CNC-machined solid aluminum for a mechanically rigid assembly.\u003c\/p\u003e\u003cp\u003eFor a complete system, these tweeters should be matched with compatible midbass or midrange drivers, amplification, and a correctly configured passive or active crossover. Hertz specifies its 180-watt peak handling with a high-pass filter at 1.8 kHz and 12 dB per octave. This makes the ML280-3 a focused component for a custom system rather than a direct full-range speaker replacement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm Tetolon Dome:\u003c\/strong\u003e Produces extended high-frequency output with a compact 1.38-inch diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Provides a compact magnetic structure for responsive operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900 Hz Resonance:\u003c\/strong\u003e Supports flexibility when setting an appropriate high-pass crossover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Short-Circuit Ring:\u003c\/strong\u003e Helps support clean extension into the upper-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Faceplate:\u003c\/strong\u003e Uses a profiled die-cast design intended to improve dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Rear Chamber:\u003c\/strong\u003e CNC-machined aluminum construction helps control unwanted mechanical resonance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe tweeter combines a Tetolon fiber dome, neodymium magnet, die-cast aluminum faceplate, and a CNC-machined aluminum frame and rear chamber. Hertz also specifies high-density damping beneath the dome and low-density absorbing material in the rear chamber. These construction elements are designed to manage resonance and support smooth acoustic output.\u003c\/p\u003e\u003cp\u003ePlan installation around the published 53.4 mm outer dimension, 29 mm mounting dimension, and 13.5 mm depth dimension. Use a high-pass crossover at or above the manufacturer’s stated 1.8 kHz, 12 dB-per-octave power-handling condition. For best system integration, mount the pair symmetrically and match them with 4-ohm compatible amplification and complementary midrange or midbass drivers.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631763447878,"sku":"ML280-3","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71oeDbpEnZL.jpg?v=1784382085"},{"product_id":"hertz-mp25-3-1-14-tetolon-dome-tweeters","title":"Hertz MP25-3 1.14\" Tetolon Dome Tweeters","description":"\u003cp\u003eThe Hertz MP25-3, also identified by Hertz as the MP 25.3 PRO, is a pair of 29 mm (1.14-inch) car-audio tweeters designed for component speaker upgrades. They reproduce upper-midrange and high-frequency detail that factory speakers can lack, making them suitable for front-stage systems. Their 4-ohm design allows integration with compatible car-audio amplifiers and passive or active crossover systems.\u003c\/p\u003e\u003cp\u003eEach tweeter uses a Tetolon soft dome and a 25 mm ferrofluid-cooled voice coil. This combination is engineered for detailed treble reproduction with controlled response across its specified 1.4 kHz to 22.5 kHz frequency range. With 91 dB SPL sensitivity, the MP25-3 is intended to work efficiently in a properly configured system.\u003c\/p\u003e\u003cp\u003eA high-density neodymium magnetic circuit provides compact motor structure and control of the moving assembly. Hertz's Center Tuning Duct design allows air exchange between the dome and rear chamber, supporting the tweeter's 1,200 Hz resonant frequency. The rear chamber is damped to support a controlled high-pass roll-off when the tweeter is filtered correctly.\u003c\/p\u003e\u003cp\u003eThe MP25-3 is rated for 120 watts peak power when high-pass filtered at 2.5 kHz with a 12 dB-per-octave slope. A separate crossover is required; these tweeters should not be connected to a full-range signal without appropriate high-pass protection. They can be used in custom two-way or three-way systems when crossover points, slopes, and amplifier gain are selected for the rest of the system.\u003c\/p\u003e\u003cp\u003eHertz includes installation hardware intended to support flush, angled surface, and OEM-style mounting approaches. The compact 17 mm (0.67-inch) mounting depth can help with installations in factory sail panels, dash locations, or custom pods. Pair the tweeters with compatible midrange or woofer drivers and a properly matched crossover network for a balanced front soundstage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Dome:\u003c\/strong\u003e Soft-dome diaphragm supports detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Compact high-flux motor supports transient control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Voice Coil:\u003c\/strong\u003e Ferrofluid cooling helps manage thermal demands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Tuning Duct:\u003c\/strong\u003e Tunes rear-chamber airflow to lower resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91 dB Sensitivity:\u003c\/strong\u003e Supports efficient use with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting Hardware:\u003c\/strong\u003e Supports flush, angled, and OEM-style installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP25-3 uses a Tetolon fiber soft dome, a 25 mm voice coil, and a neodymium magnetic circuit. Its rear chamber contains damping material, while the faceplate geometry is designed by Hertz for off-axis installation behavior. Each speaker weighs 0.07 kg (0.14 lb), helping keep the tweeter assembly compact for custom or factory-location mounting.\u003c\/p\u003e\u003cp\u003eUse these tweeters only with a suitable high-pass crossover or DSP crossover setting. Hertz specifies the 120-watt peak rating with a 2.5 kHz, 12 dB-per-octave high-pass filter; system tuning should account for the companion drivers and amplifier gain. The included flush-mount, angled surface-mount, and OEM-mounting accessories provide multiple placement options, but verify available panel depth and opening dimensions before installation.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631775539270,"sku":"MP25-3","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Y0IJbFiIL.jpg?v=1784382484"},{"product_id":"hertz-mp28-3-1-38-component-tweeters","title":"Hertz MP28-3 1.38\" Component Tweeters","description":"\u003cp\u003eThe Hertz MP 28.3 Mille Pro is a 35 mm (1.38 in.) component tweeter designed for detailed high-frequency reproduction in a car audio upgrade. It is intended for systems that need a dedicated tweeter rather than a coaxial speaker’s built-in high-frequency driver. With a 4-ohm nominal impedance and 91 dB sensitivity, it is suited to use with compatible passive crossovers and component-speaker systems.\u003c\/p\u003e\u003cp\u003eThis tweeter uses a Tetolon fiber dome and a 28 mm CCAW voice coil to keep the moving assembly light while maintaining control. Its frequency response is specified from 1 kHz to 25 kHz, supporting upper-frequency detail and dispersion for front-stage listening. The faceplate geometry is engineered to support more consistent output when the tweeter is installed off-axis, such as in factory-style dashboard or pillar locations.\u003c\/p\u003e\u003cp\u003eA double neodymium motor is used for efficient magnetic control, while the rear acoustic chamber is damped with natural-fiber non-woven material. Hertz specifies a 900 Hz resonant frequency, which supports integration with an appropriately filtered midwoofer. The supplied MPCX 2T.3 crossover uses a 12 dB\/octave high-pass network at 3.5 kHz.\u003c\/p\u003e\u003cp\u003eThe MP 28.3 is rated for up to 180 watts peak when high-pass filtered at 1.8 kHz with a 12 dB\/octave slope. For normal component-system use, the included crossover provides the specified 3.5 kHz crossover point and selectable 0 dB or -2 dB tweeter level. This makes it practical for tailoring treble output to the vehicle’s mounting position and interior acoustics.\u003c\/p\u003e\u003cp\u003eHertz includes multiple mounting accessories for flush and angled installation options. An angled support can help direct the tweeter toward the listening area when mounting on an A-pillar or dashboard. The MP 28.3 can be used as a replacement or upgrade tweeter in a properly designed passive component system, or with active processing when the installer provides suitable filtering and protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm Tetolon Dome:\u003c\/strong\u003e Supports detailed high-frequency output with broad off-axis dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm CCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire for a light moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Neodymium Motor:\u003c\/strong\u003e Provides efficient magnetic control in a compact structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamped Rear Chamber:\u003c\/strong\u003e Helps control resonance and supports lower-frequency integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded MPCX 2T.3 Crossover:\u003c\/strong\u003e Provides 12 dB\/octave high-pass filtering at 3.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Allows 0 dB or -2 dB output adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 28.3 combines a Tetolon fiber dome, ferrofluid-cooled CCAW voice coil, double neodymium magnet system, and extended rear chamber. The compact driver measures 53.4 mm across at its widest stated physical dimension and weighs 0.075 kg (0.16 lb) per speaker. Its faceplate and mounting system are designed for both cosmetic integration and useful aiming flexibility.\u003c\/p\u003e\u003cp\u003eUse the supplied MPCX 2T.3 crossover for the manufacturer-specified 3.5 kHz high-pass point and connect the tweeter according to the crossover’s marked terminals. Flush-mounting rings, an angled support, and a watchband accessory are provided for installation flexibility. Select the 0 dB or -2 dB crossover setting after listening from the driver’s seat, especially when the tweeters are mounted close to the windshield or aimed directly at occupants.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631779110982,"sku":"MP28-3","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pCQ3u7oFL.jpg?v=1784382632"},{"product_id":"hertz-st25aneo-2-1-8-compression-tweeters","title":"Hertz ST25ANEO-2 1.8\" Compression Tweeters","description":"\u003cp\u003eThe Hertz ST25ANEO-2 is a pair of compact 44 mm (1.8-inch) high-efficiency compression tweeters for car-audio systems. It is designed to add focused upper-frequency output where conventional full-range speakers or midranges need dedicated treble support. The ST 25A NEO active-version design supplies the tweeters themselves for use in a properly configured active or filtered system.\u003c\/p\u003e\u003cp\u003eWith a 3 kHz to 20 kHz frequency-response specification and 107 dB SPL sensitivity, these tweeters are intended for systems that prioritize high-frequency presence and output. Their aluminum dome is lightweight for responsive high-frequency reproduction. A 4-ohm nominal impedance supports matching with compatible car-audio amplification and crossover networks.\u003c\/p\u003e\u003cp\u003eThe ST25ANEO-2 uses a 25 mm CCAR copper-clad aluminum ribbon voice coil and a neodymium motor. Hertz specifies N38 H neodymium for the motor assembly, helping keep the driver compact and light. The compression-driver format also incorporates a phase plug and loading horn optimized using FEM design methods.\u003c\/p\u003e\u003cp\u003eHertz rates each tweeter for 100 watts peak when it is high-pass filtered at 5 kHz with a 12 dB-per-octave slope. This filter requirement is important: the tweeters should not be connected directly to a full-range signal. A suitable active crossover, DSP, or passive high-pass network is needed to limit low-frequency energy.\u003c\/p\u003e\u003cp\u003eThe compact housing uses high-current screw terminals for speaker-wire connection and includes body waterproofing with anti-UV treatment. Its published dimensions should be checked against the intended custom panel, pod, or mounting location before installation. These tweeters are a practical match for an SPL-oriented multi-driver build that needs dedicated high-frequency drivers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm Compression Driver:\u003c\/strong\u003e Compact high-efficiency tweeter format for dedicated high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 W Peak Handling:\u003c\/strong\u003e Rated with a 5 kHz, 12 dB-per-octave high-pass filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB SPL Sensitivity:\u003c\/strong\u003e Supports strong output with comparatively modest amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN38 H Neodymium Motor:\u003c\/strong\u003e Provides a compact magnetic motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome:\u003c\/strong\u003e Lightweight diaphragm material for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAR Voice Coil:\u003c\/strong\u003e Copper-clad aluminum ribbon coil supports thermal and mechanical capability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST25ANEO-2 combines an aluminum dome, CCAR voice coil, neodymium magnet, and FEM-optimized phase plug\/loading horn. Hertz also specifies body waterproofing and anti-UV treatment, along with high-current screw terminals. Each component weighs 0.39 kg (0.86 lb).\u003c\/p\u003e\u003cp\u003eUse these tweeters as part of a filtered system, with a high-pass point at 5 kHz and a 12 dB-per-octave slope specified for the peak-power rating. Confirm the 57 mm, 43.5 mm, 55.5 mm, and 29.7 mm published dimensional references against the planned installation location. Pair them with compatible 4-ohm amplification, an active crossover or DSP, and suitable midrange drivers for a complete system.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631858999366,"sku":"ST25ANEO-2","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51C59aw4q2L.jpg?v=1784384079"},{"product_id":"hertz-st25kneo-2-1-8-compression-tweeter-kit","title":"Hertz ST25KNEO-2 1.8\" Compression Tweeter Kit","description":"\u003cp\u003eThe Hertz ST25KNEO-2 is a compact 44 mm (1.8-inch) high-efficiency compression tweeter kit designed to add focused high-frequency output to a car audio system. It is intended for systems that need dedicated treble reproduction above the midrange range. With a 4-ohm nominal impedance and 107 dB sensitivity rating, it is suited to high-output speaker installations.\u003c\/p\u003e\u003cp\u003eThis kit is a practical option for enthusiasts building or upgrading an SPL-oriented system with separate midrange drivers. Its aluminium dome and horn-loaded design are engineered to reproduce upper-frequency detail from 3 kHz to 20 kHz. The compact neodymium motor helps keep the assembly lighter and more space-conscious than conventional large-magnet compression tweeters.\u003c\/p\u003e\u003cp\u003eThe ST25KNEO-2 uses a 25 mm CCAR copper-clad aluminium ribbon voice coil and an extra-light aluminium membrane. Hertz also specifies a FEM-optimized phase plug and loading horn, intended to support controlled high-frequency output. Its 100-watt peak power-handling specification applies with a 5 kHz high-pass filter at 12 dB per octave.\u003c\/p\u003e\u003cp\u003eAs the kit version of Hertz's ST 25 Neo platform, the ST25KNEO-2 includes metal mesh grilles and inline crossover filters. These included filters help support high-pass use when integrating the tweeters with compatible midrange speakers. High-current screw terminals provide a secure connection point for speaker wiring.\u003c\/p\u003e\u003cp\u003eThe tweeters fit naturally into multi-driver front-stage, door-panel, custom-pod, and show-style audio upgrades where placement and aiming can be planned carefully. Their waterproofed, anti-UV-treated body is designed for exposure to outdoor conditions without discoloration over time. Confirm mounting clearance, amplifier setup, crossover point, and polarity before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e44 mm Compression Tweeter:\u003c\/strong\u003e Compact horn-loaded design for dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 W Peak Handling:\u003c\/strong\u003e Rated with a 5 kHz, 12 dB\/octave high-pass filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports strong output with modest amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Keeps the tweeter compact and lightweight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium Dome:\u003c\/strong\u003e Extra-light membrane supports upper-frequency response to 20 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKit Accessories:\u003c\/strong\u003e Includes inline crossover filters and metal mesh grilles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST25KNEO-2 combines a neodymium N38 H motor, aluminium dome, CCAR voice coil, and FEM-optimized phase plug and loading horn. Hertz specifies body waterproofing and anti-UV treatment for durability in exposed installations. Each tweeter weighs 0.39 kg and uses high-current screw terminals.\u003c\/p\u003e\u003cp\u003eUse these tweeters in a properly filtered multi-speaker system rather than as full-range speakers. Hertz specifies the 100 W peak rating with a 5 kHz high-pass filter at 12 dB per octave, and the included inline crossover filters should be installed according to their supplied instructions. Check the 57 mm overall diameter and 29.7 mm mounting-depth dimension before choosing a mounting location.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631859228742,"sku":"ST25KNEO-2","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51D_kgHOtKL.jpg?v=1784384135"},{"product_id":"infinity-primus-753t-0-75-silk-dome-tweeters","title":"Infinity Primus 753T 0.75\" Silk Dome Tweeters","description":"\u003cp\u003eThe Infinity Primus 753T is a pair of 0.75-inch car audio tweeters designed to add dedicated high-frequency reproduction to a vehicle sound system. Its edge-driven silk dome design is intended for clear upper-frequency detail, making it a practical choice for a component-speaker installation or a tweeter replacement. The pair includes in-line crossovers to help route appropriate frequencies to the tweeters.\u003c\/p\u003e\u003cp\u003eEach Primus 753T tweeter is rated for 40 watts RMS power handling and 120 watts peak power handling. With a 91 dB sensitivity rating measured at 2.83V\/1m, the set is designed to work efficiently with compatible factory or aftermarket amplification. Its specified frequency response is 2 kHz to 20 kHz at -6 dB.\u003c\/p\u003e\u003cp\u003eThe 3\/4-inch silk dome diaphragm is edge-driven, a construction intended to reproduce the upper range with a smooth, detailed character. The compact tweeter format can be useful where a full-range speaker cannot be installed but added treble definition is desired. A 3-ohm nominal impedance should be considered when matching the tweeters with the vehicle's amplifier or head unit.\u003c\/p\u003e\u003cp\u003eIncluded in-line crossovers use a 5 kHz crossover point with a 12 dB-per-octave slope. These crossovers are an important part of the system because they direct lower frequencies away from the tweeters. Use the supplied crossover on each channel rather than wiring the tweeters as full-range drivers.\u003c\/p\u003e\u003cp\u003eThe Primus 753T package includes mounting hardware for several installation approaches, including flush, surface, and Starfish-style mounting options. This gives an installer flexibility when working with dash panels, sail panels, factory tweeter openings, or custom locations. It is suited to a system upgrade where properly placed tweeters and compatible midrange speakers are used to improve front-stage coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome:\u003c\/strong\u003e Uses a silk dome tweeter designed for detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.75-Inch Tweeters:\u003c\/strong\u003e Compact 3\/4-inch format suits many dedicated tweeter locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Handling:\u003c\/strong\u003e Supports up to 40 watts RMS per tweeter system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Peak Handling:\u003c\/strong\u003e Provides a 120-watt peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn-Line Crossovers:\u003c\/strong\u003e Included crossovers operate at 5 kHz with a 12 dB\/octave slope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Flush, surface, and Starfish mounting hardware is supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Primus 753T uses 3\/4-inch edge-driven silk dome tweeters and is supplied in a black finish. Its package includes threaded flush-mount adapters, locking nuts, surface-mount cups, and Starfish tweeter mounts. The mounting parts support different placement methods without requiring the installer to source basic tweeter hardware separately.\u003c\/p\u003e\u003cp\u003eFor installation, place one included in-line crossover between each tweeter and the audio system, observing speaker polarity. Confirm that the selected location has adequate clearance and that the amplifier or source unit is compatible with the 3-ohm nominal impedance. Flush mounting, surface mounting, and use of the supplied Starfish mounts should be chosen according to the vehicle's available panel space and factory tweeter location.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632043384902,"sku":"INFSPKPR753T","price":81.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61xYTZ8S6ZL.jpg?v=1784392666"},{"product_id":"audison-av1-1-1-1-voce-series-tweeters-pair","title":"Audison AV1-1 1.1\" Voce Series Tweeters (Pair)","description":"\u003cp\u003eThe Audison AV 1.1 is a pair of 28 mm (1.1-inch) component tweeters designed to add dedicated high-frequency reproduction to a car audio system. They are suited to replacing factory tweeters or building a custom active or passive component front stage. With a 4-ohm nominal impedance and 92 dB sensitivity, they can be matched with compatible car-audio amplification and crossover hardware.\u003c\/p\u003e\u003cp\u003eThese tweeters are intended for listeners who want a separate high-frequency driver rather than relying on a coaxial speaker’s integrated tweeter. Their specified 1.2 kHz to 22 kHz frequency response supports detailed upper-frequency reproduction when the drivers are properly high-pass filtered. The compact 48 mm outer diameter also helps with installations in factory sail panels, dash locations, or custom A-pillar pods where space permits.\u003c\/p\u003e\u003cp\u003eThe AV 1.1 uses a Tetolon dome, a silk-and-cotton material with proprietary damping treatment. Audison pairs this dome with a lightweight, double-layer CCAW copper-clad aluminum voice coil to keep the moving assembly compact. The design is intended to provide efficient, controlled high-frequency output with a natural level of detail.\u003c\/p\u003e\u003cp\u003eAn annular rear damping chamber and dedicated damping material are part of the AV 1.1’s acoustic design. This rear-chamber construction is engineered to extend usable low-frequency response for a tweeter and reduce harmonic distortion. A high-flux-density neodymium magnet supports the compact motor assembly.\u003c\/p\u003e\u003cp\u003eThe AV 1.1 can be used with compatible Audison Voce woofers, midrange drivers, passive crossovers, or an active DSP-based system. Audison specifies high-pass filtering at 2.0 kHz with a 12 dB\/octave slope for the tweeter’s 180-watt peak power-handling specification. Proper crossover selection, polarity, aiming, and level matching are important for integrating the tweeters into a balanced system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Dome:\u003c\/strong\u003e Silk-and-cotton dome material supports smooth high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e High-flux motor design keeps the tweeter assembly compact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Layer CCAW Voice Coil:\u003c\/strong\u003e Lightweight copper-clad aluminum construction promotes efficient operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnnular Rear Chamber:\u003c\/strong\u003e Damped rear volume supports lower tweeter crossover capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with compatible car-audio amplifiers and crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Profile:\u003c\/strong\u003e 48 mm outer diameter and 15.2 mm mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 1.1 combines a 28 mm Tetolon dome with a 28 mm double-layer CCAW voice coil on a Kapton former. Its neodymium motor measures 27.9 mm, while the annular rear damping chamber uses dedicated damping material. Each tweeter weighs 0.073 kg and has a total depth of 28 mm.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation: the specified mounting diameter is 44.8 mm, outer diameter is 48 mm, and mounting depth is 15.2 mm. Use a suitable high-pass crossover or DSP setting; Audison specifies a 2.0 kHz high-pass filter at 12 dB\/octave for the listed peak-power condition. The pair is supplied with grilles, and installation should be planned around correct left\/right aiming, secure mounting, and matching the tweeter level to the accompanying midbass or midrange drivers.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45632058523718,"sku":"AV1-1","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71MFq9JxwgL.jpg?v=1784393136"},{"product_id":"infinity-ref757t-0-75-edge-driven-textile-dome-tweeters","title":"Infinity REF757T 0.75\" Edge-Driven Textile Dome Tweeters","description":"\u003cp\u003eThe Infinity REF757T is a pair of 0.75-inch car audio tweeters designed to restore clear, detailed high frequencies in an upgraded or replacement speaker system. They are a focused solution for vehicles with dull, damaged, or limited factory tweeters. The compact format and included mounting options support a range of custom and factory-location installations.\u003c\/p\u003e\u003cp\u003eEach REF757T uses an edge-driven textile dome design intended to produce smooth treble response through the upper frequency range. With a 2.5 kHz to 21 kHz frequency response, the pair is suited to handling the high-frequency portion of music rather than full-range playback. Their 93 dB sensitivity rating helps them work efficiently with appropriately matched factory or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe tweeters are rated at 45 watts RMS and 135 watts peak each, with a 3-ohm nominal impedance. This low-impedance design is intended to help make effective use of available power in car audio systems. Passive in-line crossovers are included to direct suitable high-frequency content to the tweeters and help protect them from lower frequencies.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a key part of the REF757T package. Surface-mount, flush-mount, and Starfish mounting hardware are included, allowing the tweeters to be positioned in many dash, sail-panel, door, or factory tweeter locations. The surface-mount housing uses a ball-and-socket arrangement that can be aimed to approximately 40 degrees.\u003c\/p\u003e\u003cp\u003eThe REF757T is a practical choice for listeners building a component-style front stage or replacing factory tweeters while retaining a compatible factory radio or adding an amplifier. It can be paired with properly crossed-over midrange or full-range speakers to create a more complete frequency presentation. Fitment should be checked against the selected mounting method, available panel clearance, and the vehicle's existing wiring configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.75-Inch Textile Dome:\u003c\/strong\u003e Focuses on detailed high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Design:\u003c\/strong\u003e Supports smooth, controlled treble response at higher output levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45W RMS Handling:\u003c\/strong\u003e Accommodates appropriately matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Impedance:\u003c\/strong\u003e Helps draw useful power from compatible car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive In-Line Crossovers:\u003c\/strong\u003e Filter lower frequencies before they reach the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Includes flush, surface, and Starfish mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF757T uses textile edge-driven dome tweeters with a compact circular profile. Its included I-Mount and Starfish hardware provides several physical installation approaches without requiring a single fixed mounting style. The package also includes Infinity logo badges, mounting screws, washers, nuts, and flush-mount hardware.\u003c\/p\u003e\u003cp\u003eUse one included passive in-line crossover for each tweeter, connecting the crossover input to the appropriate high-frequency speaker signal and its output to the tweeter. Verify polarity, available depth, cutout size, and trim-panel clearance before drilling or modifying a vehicle panel. For factory locations, the Starfish brackets can be trimmed and adapted as needed; some installations may require additional vehicle-specific mounting hardware.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632082477126,"sku":"INFSPKRF757TUS","price":125.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61H803YbHTL.jpg?v=1784393568"},{"product_id":"jbl-club-194t-3-4-edge-driven-dome-tweeters","title":"JBL CLUB-194T 3\/4\" Edge-Driven Dome Tweeters","description":"\u003cp\u003eThe JBL CLUB-194T is a pair of 3\/4-inch edge-driven dome tweeters designed to add focused high-frequency detail to a car audio system. They are suited to replacing worn factory tweeters or building a component-style speaker upgrade. The compact format supports placement in many common factory and custom locations.\u003c\/p\u003e\u003cp\u003eWith 50 watts RMS and 150 watts peak power handling, these tweeters are intended for systems using a compatible head unit or external amplifier. Their 92dB sensitivity rating at 2.83V helps them work efficiently in an automotive environment. The 3.0-ohm nominal impedance should be considered when matching them with an amplifier or crossover network.\u003c\/p\u003e\u003cp\u003eThe CLUB-194T covers a specified frequency range of 3kHz to 20kHz, concentrating on upper-midrange and treble information rather than bass. This makes it a practical companion for door, dash, or kick-panel midrange speakers that handle the lower frequencies. An included in-line crossover pigtail is supplied for each tweeter.\u003c\/p\u003e\u003cp\u003eJBL's edge-driven dome design is paired with a compact 19mm tweeter size for installations where space is limited. The package includes multiple mounting pieces so installers can choose a surface, flush, or Starfish-adapter approach. This flexibility can help retain a clean appearance when upgrading factory speaker locations.\u003c\/p\u003e\u003cp\u003eThe supplied Starfish mounts are designed for placement behind factory grilles and for varied mounting arrangements, including locations such as an A-pillar. The I-Mount hardware adds flush- and surface-mount options, with an angled flush-mount position available. Together, the included hardware supports a tailored installation without requiring every vehicle to use the same mounting method.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-Inch Tweeter Size:\u003c\/strong\u003e Compact 19mm format suits many factory and custom locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Dome Design:\u003c\/strong\u003e Designed for dedicated high-frequency reproduction in a vehicle system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports power-matched head-unit or amplifier-based installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0-Ohm Impedance:\u003c\/strong\u003e Match with compatible amplification and crossover equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStarfish Mounts:\u003c\/strong\u003e Six break-off tabs support varied mounting configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI-Mount Hardware:\u003c\/strong\u003e Supports flush, surface, and angled mounting approaches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach CLUB-194T uses a compact edge-driven dome tweeter assembly measuring approximately 32.5mm across and 16.8mm high. The package includes two tweeters, flush-mount cups, threaded flush-mount adapters, surface-mount cups, Starfish mounts, plastic locking nuts, spacers, washers, and screws. These parts provide several mechanical mounting choices from one product package.\u003c\/p\u003e\u003cp\u003eFor a flush I-Mount installation, JBL specifies a 1-3\/4-inch cutout and 1-inch mounting depth; the flush-mounted tweeter can be angled up to plus or minus 40 degrees. Use the supplied in-line crossover pigtails when wiring the tweeters, and observe polarity markings during connection. Confirm available mounting clearance, amplifier compatibility with a 3.0-ohm load, and suitable crossover integration before installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632111509574,"sku":"CLUB-194T","price":115.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61dG8JX_v-L.jpg?v=1784394340"},{"product_id":"jbl-club-64ctp-6-5-component-speakers-with-tweeter-pods","title":"JBL Club 64CTP 6.5\" Component Speakers With Tweeter Pods","description":"\u003cp\u003eThe JBL Club 64CTP is a 6-1\/2-inch two-way component speaker system designed for vehicle audio upgrades. It separates the woofer and tweeter so installers can place the high frequencies independently from the midbass drivers. The system includes dedicated crossovers and tweeter pods to support a more flexible installation than a conventional coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis set is suited to drivers replacing factory door speakers while seeking separate tweeter placement. Its 3.0-ohm nominal impedance and 92dB sensitivity are specified for efficient operation in automotive audio systems. Power handling is rated at 70W RMS and 210W peak for the complete component system.\u003c\/p\u003e\u003cp\u003eThe 6-1\/2-inch woofers use JBL Plus One cone architecture, which increases cone area within the speaker size. Their acoustically damped polypropylene cones are UV-resistant for use in the heat and humidity of a vehicle environment. The published frequency response is 55Hz to 20kHz.\u003c\/p\u003e\u003cp\u003eSeparate tweeters help bring upper-frequency detail closer to the preferred listening position. The included external crossovers use a 5.5kHz crossover point and provide a selectable tweeter output level of 0dB or +3dB. This adjustment can help account for tweeter mounting location and cabin acoustics.\u003c\/p\u003e\u003cp\u003eThe Club 64CTP package supports several tweeter mounting approaches, including flush, surface, Starfish adapter, I-Mount, and pod installations. The dedicated pods offer angle adjustment after mounting for more controlled aiming. It is a practical choice for a component-speaker upgrade where door woofer fitment and flexible tweeter positioning are both important.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates the 6-1\/2-inch woofers and tweeters for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to 70 watts RMS per system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Cone Architecture:\u003c\/strong\u003e Provides increased cone area within the 6-1\/2-inch woofer format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Acoustically damped, UV-resistant cones suit automotive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0dB or +3dB tweeter output to suit placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Pods:\u003c\/strong\u003e Allows post-mount tweeter aiming for different listening positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 64CTP uses 6-1\/2-inch polypropylene woofers with JBL Plus One cone architecture and separate tweeters. External crossovers divide the signal at 5.5kHz, while the tweeter system includes flush-mount, surface-mount, Starfish, I-Mount, and pod hardware. Grilles, adapter rings, mounting hardware, spacers, washers, and foam gasket material are included.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and available door-panel clearance before installation. The woofer has a 158.0mm outside diameter, 127.0mm cutout diameter, and 51.5mm mounting depth. Connect each woofer and tweeter through its included crossover, then select the 0dB or +3dB tweeter level and aim the pod or I-Mount tweeter as needed.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632136675398,"sku":"JBLSPKCB64CTP","price":248.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61-NfmkIErL.jpg?v=1784396751"},{"product_id":"kenwood-kfc-st01-13-16-add-on-tweeters","title":"Kenwood KFC-ST01 13\/16\" Add-On Tweeters","description":"\u003cp\u003eThe Kenwood KFC-ST01 is a compact add-on tweeter designed to extend a car audio system’s high-frequency reproduction. Its 13\/16-inch PEI balanced-dome design is intended for installations where additional treble detail is needed beyond the capability or placement of existing speakers. With a 5 kHz to 25 kHz frequency-response range, it is suited to the upper-frequency portion of a properly configured speaker system.\u003c\/p\u003e\u003cp\u003eThis tweeter is a practical option for listeners upgrading factory audio or supplementing compatible aftermarket speakers. It uses a 4-ohm nominal impedance and is rated for 40 watts of input power, helping it align with many conventional car-audio speaker circuits. Its 90 dB sensitivity specification provides useful output efficiency for a compact tweeter.\u003c\/p\u003e\u003cp\u003eThe KFC-ST01 uses a PEI balanced-dome tweeter diaphragm. This driver format is engineered for high-frequency playback in a small physical package, allowing it to be positioned closer to the listening area when the installation permits. Its compact 47 x 47 mm face dimensions can support discreet placement in many custom or add-on locations.\u003c\/p\u003e\u003cp\u003eKenwood rates the KFC-ST01 at 160 watts peak power and 40 watts rated input power. The stated operating range begins at 5 kHz, so it is designed to complement speakers that handle the lower and midrange frequencies. System power, impedance, and high-frequency signal routing should be matched appropriately during installation.\u003c\/p\u003e\u003cp\u003eFor a focused system upgrade, the KFC-ST01 can be used where a small dedicated tweeter is preferred over replacing larger door or dash speakers. Kenwood lists a 2-meter cord and bracket among the supplied accessories, supporting an add-on mounting approach. It is a straightforward choice for vehicle owners building or refreshing a component-style high-frequency stage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e13\/16-Inch Tweeter:\u003c\/strong\u003e Compact size for dedicated high-frequency installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome:\u003c\/strong\u003e Designed for clear upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Rated Input:\u003c\/strong\u003e Supports appropriately matched car-audio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160W Peak Power:\u003c\/strong\u003e Handles short-duration musical peaks within specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common car-audio speaker circuit designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 kHz–25 kHz Response:\u003c\/strong\u003e Covers the upper-frequency range for added detail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-ST01 centers on a 13\/16-inch PEI balanced-dome tweeter driver in a compact 47 mm-wide, 47 mm-high housing. Its specified overall depth is 27.9 mm, and each tweeter has a listed mass of 0.064 kg. The small form factor is suited to installations that need a dedicated high-frequency driver without the footprint of a larger speaker.\u003c\/p\u003e\u003cp\u003eKenwood lists a 2-meter cord and mounting bracket as included accessories. Confirm available mounting clearance before installation, especially the 27.9 mm depth, and use a system configuration that directs suitable high-frequency content to the tweeter. Match the 4-ohm impedance and 40-watt rated input specification with compatible audio equipment and wiring practices.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633158152262,"sku":"KFC-ST01","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81SRpIEzIeL.jpg?v=1784406329"},{"product_id":"memphis-mjpt25-1-mojo-pro-bullet-tweeters","title":"Memphis MJPT25 1\" MOJO Pro Bullet Tweeters","description":"\u003cp\u003eThe Memphis MJPT25 is a pair of 1-inch MOJO Pro bullet tweeters designed to add dedicated high-frequency output to a vehicle audio system. They are suited to systems that need more vocal presence, cymbal detail, and upper-frequency projection than factory speakers can provide. With a 4-ohm load and high 105 dB sensitivity, these tweeters are intended for high-output aftermarket applications.\u003c\/p\u003e\u003cp\u003eEach MJPT25 tweeter is rated for 100 watts RMS and 200 watts peak power handling. This power capability makes the pair appropriate for use with a properly matched external amplifier or a high-powered multi-channel system. Their 1,500-20,000 Hz frequency response focuses performance on the upper midrange and treble range.\u003c\/p\u003e\u003cp\u003eThe tweeters use aluminum dome diaphragms and a neodymium magnet motor structure. A billet phase plug is incorporated into the bullet-style design. This construction supports a compact high-efficiency format for installations where strong high-frequency output is a priority.\u003c\/p\u003e\u003cp\u003eThe MJPT25 uses a rear-mount threaded body design that allows the mounting surface to be secured between the threaded trim ring and mounting collar. Its compact 1-inch, 25 mm driver size works well in custom panels, doors, dash locations, motorcycle fairings, and other suitable speaker pods. A 1.69-inch mounting cutout is specified for installation.\u003c\/p\u003e\u003cp\u003eFor system integration, the included capacitors provide a basic first-order high-pass filter when another crossover is not being used. This helps protect the tweeters from low-frequency content that they are not designed to reproduce. Pair the MJPT25 with compatible midrange speakers, an appropriate crossover strategy, and amplifier power matched to its RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Rating:\u003c\/strong\u003e Supports use in properly matched amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Delivers strong output with efficient power use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits many aftermarket amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Phase Plug:\u003c\/strong\u003e Forms part of the durable bullet-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Rear Mount:\u003c\/strong\u003e Simplifies secure mounting through a prepared panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPT25 combines an aluminum dome, billet phase plug, neodymium magnet, and gold-plated compression terminals in a compact bullet-tweeter assembly. Its threaded body, trim ring, and mounting collar are designed to secure the tweeter from the rear of the mounting surface. Grilles are not included.\u003c\/p\u003e\u003cp\u003ePlan for a 1.69-inch cutout and approximately 1.5 inches of mounting depth, while confirming clearance behind the mounting panel before drilling. Connect speaker wiring to the compression terminals, observing polarity, and use the included inline capacitor on the positive lead if no other suitable high-pass crossover is installed. The terminals accept up to 16-gauge speaker wire.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183875142,"sku":"MJPT25","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81kUsCMVeyL.jpg?v=1784410669"},{"product_id":"memphis-mjpt35-1-4-mojo-pro-bullet-tweeters","title":"Memphis MJPT35 1.4\" MOJO Pro Bullet Tweeters","description":"\u003cp\u003eThe Memphis MJPT35 is a pair of 35 mm (1.4-inch) MOJO Pro bullet tweeters designed to add dedicated high-frequency output to a vehicle or powersports audio system. It is intended for installations where conventional full-range speakers need added treble presence and projection. With a 4-ohm nominal impedance, the pair can be planned into compatible amplified or crossover-based systems.\u003c\/p\u003e\u003cp\u003eThese tweeters are aimed at listeners building a high-output component setup, including car, motorcycle-fairing, and side-by-side applications. Their high-efficiency design supports strong output from a compact driver. The 108 dB sensitivity specification helps them complement efficient midrange speakers in a MOJO Pro-style system.\u003c\/p\u003e\u003cp\u003eThe MJPT35 is rated for 125 watts RMS and 250 watts peak power handling. That rating makes proper amplifier gain setting and frequency management important when integrating the tweeters into a system. Use components and wiring appropriate for a 4-ohm high-frequency speaker circuit.\u003c\/p\u003e\u003cp\u003eMemphis equips the MJPT35 with a neodymium magnet to keep the tweeter assembly compact. A billet phase plug is part of the driver design, while gold-plated compression terminals provide a secure speaker-wire connection. The threaded body mounting design is intended to simplify installation in custom panels and other suitable mounting locations.\u003c\/p\u003e\u003cp\u003eThe MOJO Pro platform is described by Memphis as water-resistant and suitable for demanding outdoor-oriented audio applications. The MJPT35 is sold as a pair, making it appropriate for left- and right-channel placement. It can be used as part of a new component build or as a high-frequency upgrade alongside compatible midrange drivers and amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm Bullet Tweeters:\u003c\/strong\u003e Compact dedicated drivers for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car audio speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e108 dB Sensitivity:\u003c\/strong\u003e Efficient design suited to high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Phase Plug:\u003c\/strong\u003e Integrated element in the bullet-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Body Mount:\u003c\/strong\u003e Helps simplify secure custom-panel installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPT35 uses a compact neodymium-magnet motor structure, billet phase plug, and gold-plated compression terminals. Its threaded-body format is designed for a clean, secure mounting approach. Memphis lists the product without grilles.\u003c\/p\u003e\u003cp\u003eAllow for the specified 1.5-inch mounting depth when selecting a location, and confirm clearance behind the panel before drilling. Install the pair as left and right high-frequency channels in a compatible 4-ohm system, with amplifier output and crossover setup selected to suit the 125-watt RMS rating. The water-resistant MOJO Pro design makes it suitable for vehicle and powersports-oriented installations where exposure can be a consideration.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633184038982,"sku":"MJPT35","price":198.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iJ4evzCeL.jpg?v=1784410719"},{"product_id":"memphis-msa1v-1-aluminum-dome-tweeters","title":"Memphis MSA1V 1\" Aluminum Dome Tweeters","description":"\u003cp\u003eThe Memphis MSA1V is a pair of 1-inch aluminum dome tweeters designed to add dedicated high-frequency output to a car audio system. They are suited to listeners replacing worn factory tweeters or building a component-style speaker arrangement. The compact design helps place treble reproduction where it can improve front-stage focus.\u003c\/p\u003e\u003cp\u003eEach MSA1V uses an aluminum dome diaphragm intended for clear, detailed high-frequency reproduction. With an 88 dB sensitivity rating and a published 75-watt RMS, 150-watt peak power rating, these tweeters are designed for systems with appropriately matched amplification. They can be used as part of a balanced upgrade when paired with compatible midrange or midbass speakers.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a central feature of the MSA1V package. The tweeters support angle, flush, and surface-mount configurations, allowing installers to select a placement that suits the vehicle and desired listening position. This makes them practical for doors, sail panels, dash locations, or custom panels where space and aiming requirements vary.\u003c\/p\u003e\u003cp\u003eTwo-way passive crossovers are included to support proper frequency division in a compatible component system. Using the supplied crossovers helps route the appropriate signal range to the tweeters rather than sending them a full-range signal. This simplifies integration with compatible speaker wiring and amplification.\u003c\/p\u003e\u003cp\u003eThe MSA1V has a shallow published mounting depth of 0.6875 inch, helping it fit locations with limited rear clearance. A 54 mm, or 2.125-inch, mounting-hole template is published for this model. Grilles are included, and the tweeters are sold as a pair for a matched left and right installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome:\u003c\/strong\u003e Dedicated tweeter design for detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Mount Design:\u003c\/strong\u003e Supports angle, flush, and surface installation methods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossovers:\u003c\/strong\u003e Included two-way crossovers aid component-system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e Requires only 0.6875 inch of published depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Provides protective covers for installed tweeters.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MSA1V uses a 1-inch aluminum dome tweeter design with a published 13-ounce magnet size. Its compact form supports multiple mounting styles without changing the tweeter model. The pair includes grilles and is specified with a 2-year warranty.\u003c\/p\u003e\u003cp\u003eChoose flush, surface, or angle mounting based on available panel depth and the desired tweeter direction. Confirm the published 0.6875-inch mounting depth and 2.125-inch mounting-hole template before modifying a panel. Connect the tweeters through the included two-way passive crossovers in a compatible system and match power to the published rating.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633187741766,"sku":"MSA1V","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Q-cl_rsoS.jpg?v=1784411782"},{"product_id":"memphis-prx10-1-pei-dome-car-tweeters-with-crossovers","title":"Memphis PRX10 1\" PEI Dome Car Tweeters with Crossovers","description":"\u003cp\u003eThe Memphis PRX10 is a pair of 1-inch car audio dome tweeters designed to add high-frequency detail to a factory or aftermarket sound system. They are intended for vehicles where existing speakers lack clarity in vocals, cymbals, and other upper-frequency information. With a compact format and multiple mounting options, they can be used in many dash, door, sail-panel, or custom-install locations.\u003c\/p\u003e\u003cp\u003eThese tweeters use PEI dome diaphragms and are rated for 50 watts RMS and 100 watts peak power. Their 4-ohm impedance supports integration with many common car audio amplifiers and speaker systems. The 3,200-20,000 Hz frequency response focuses performance on the upper range where tweeters are most effective.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system allows the listening angle to be adjusted after installation. This can help direct high frequencies toward the listening area instead of firing away from occupants. The result is a more deliberate installation approach when replacing factory tweeters or building a component-style system.\u003c\/p\u003e\u003cp\u003eThe PRX10 package includes separate external crossovers to route appropriate frequencies to the tweeters. This helps protect the tweeters from lower-frequency content that they are not designed to reproduce. The included quick-slide wire connections and mounting hardware support a cleaner installation process.\u003c\/p\u003e\u003cp\u003eThese Memphis Power Reference tweeters are suited to listeners upgrading dull or damaged factory high-frequency drivers, as well as installers adding dedicated tweeters to a compatible speaker system. Flush-mount and angled surface-mount hardware allow placement choices based on the vehicle and desired aiming position. They can be paired with compatible full-range speakers and an appropriately configured amplifier or factory system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome:\u003c\/strong\u003e Produces dedicated high-frequency output in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports systems with up to 50 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Integrates with many car audio speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter Design:\u003c\/strong\u003e Allows aiming toward the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Includes flush and angled surface-mount hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX10 uses a 1-inch PEI dome tweeter design with a compact 0.75-inch listed mounting depth and a 0.75-ounce magnet. Its pivoting assembly is designed to make aiming more flexible than a fixed-position tweeter. The package includes flush-mount housings, retaining rings, and angled surface-mount housings for different installation approaches.\u003c\/p\u003e\u003cp\u003eFor installation, mount the tweeters high in the vehicle when practical and aim them toward the listeners for more direct high-frequency delivery. Connect each tweeter through its included crossover rather than wiring it directly to a full-range output. Confirm available mounting depth, cutout space, wiring polarity, and system power before installation; factory locations may require vehicle-specific adaptation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633195212870,"sku":"PRX10","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UFtq4ewTL.jpg?v=1784412983"},{"product_id":"memphis-prx410-4x10-2-way-coaxial-speakers","title":"Memphis PRX410 4x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX410 is a pair of 4x10-inch, 2-way coaxial car speakers designed as a direct-size upgrade for many factory speaker locations. It gives drivers a practical way to replace aging OEM speakers while retaining a compact 4x10-inch footprint. With 50 watts RMS power handling per speaker, the pair is suited to factory-radio upgrades or moderate-power aftermarket systems.\u003c\/p\u003e\u003cp\u003eThese speakers combine a full-range woofer and a centrally mounted tweeter in one assembly. The graphite-reinforced polypropylene cone is designed to reproduce midrange and upper-bass information, while the PEI dome tweeter handles higher frequencies. This coaxial layout helps simplify installation where a separate component-speaker system is not needed.\u003c\/p\u003e\u003cp\u003eThe PRX410 uses a multi-direction pivot tweeter system, allowing the tweeter to be aimed toward the listening area when installation space permits. This can help tailor high-frequency direction in dash, rear-deck, or other factory 4x10-inch locations. An integrated 6 dB tweeter crossover supports proper signal routing to the tweeter.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm impedance and 89 dB sensitivity, the PRX410 is compatible with many conventional car-audio speaker applications. Its 120 Hz to 20 kHz listed frequency response focuses it on clear vocal, instrument, and high-frequency reproduction. For a system that needs deeper low bass, it can be paired with a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eThe Power Reference Series design balances factory-location fitment with upgrade-oriented materials and adjustable treble dispersion. A 13-ounce magnet supports the speaker motor structure, while the butyl rubber surround is intended for durability during regular use. Included grilles provide an option for custom or exposed speaker installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x10-Inch Coaxial Format:\u003c\/strong\u003e Fits many factory-style 4x10-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports moderate aftermarket amplifier or radio power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail in a compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter System:\u003c\/strong\u003e Allows directional adjustment of high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many factory and aftermarket systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX410 uses a graphite-reinforced polypropylene cone, a butyl rubber surround, and a PEI dome tweeter. Its black Power Reference styling keeps the appearance understated when used behind factory panels or with the included grilles. The 2-way coaxial construction places the woofer and tweeter in one speaker frame.\u003c\/p\u003e\u003cp\u003eConfirm both the vehicle's factory opening and available mounting clearance before ordering. Memphis lists a 2.5-inch mounting depth; the speaker should be wired with correct polarity and powered within its 50-watt RMS rating. The pivot tweeter may be aimed toward the listening position where panel clearance allows, and a subwoofer can be added if deeper bass is desired.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633195966534,"sku":"PRX410","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/819g6CaNenL.jpg?v=1784413538"},{"product_id":"memphis-prx46-4x6-2-way-coaxial-speakers","title":"Memphis PRX46 4x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX46 is a pair of 4x6-inch, 2-way coaxial car speakers designed for replacing or upgrading compatible factory speaker locations. Its compact format helps address the limited space often found in dash, door, or rear-deck 4x6-inch applications. Each speaker combines a woofer and tweeter in one assembly for straightforward full-range speaker replacement.\u003c\/p\u003e\u003cp\u003eWith 30 watts RMS and 60 watts peak handling per speaker, the PRX46 is suited to modest-power car audio systems. Its 4-ohm impedance supports use with compatible factory or aftermarket audio equipment. The 86 dB sensitivity rating and 125 Hz to 20 kHz frequency response define its published operating specifications.\u003c\/p\u003e\u003cp\u003eThe speaker uses a polypropylene woofer cone with a polyurethane surround. This material combination is intended to provide a durable moving assembly for midrange and upper-bass reproduction. A PEI dome tweeter handles higher-frequency content within the coaxial design.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system lets the installer aim the tweeter during installation. This can be useful when the speaker location is off-axis from the listening position. The integrated 6 dB tweeter crossover is designed to direct appropriate frequencies to the tweeter.\u003c\/p\u003e\u003cp\u003eThe PRX46 is part of the Memphis Audio Power Reference speaker line and can be used as a focused factory-speaker replacement or as one part of a broader vehicle audio upgrade. Its 2.125-inch mounting depth should be checked against the available depth behind the intended mounting surface. Installation hardware and short speaker leads are included, while grilles are not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x6-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Per Speaker:\u003c\/strong\u003e Supports compatible moderate-power factory or aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting PEI Dome Tweeter:\u003c\/strong\u003e Allows high-frequency output to be aimed during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyurethane Surround:\u003c\/strong\u003e Supports controlled cone movement and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Routes high-frequency content to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX46 uses a black-on-black M-Cone appearance, a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and an 11-ounce magnet. Its 2-way coaxial layout places the tweeter within the woofer assembly, reducing the need for separately mounted external tweeters. Grilles are not included.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 4x6-inch speaker opening, mounting pattern, and available 2.125-inch mounting depth before ordering. The package includes two speakers, two 12-inch speaker leads, eight 1-inch screws, eight speed clips, and a user manual. For amplified systems, match the amplifier setup appropriately to the speakers' 4-ohm impedance and 30-watt RMS-per-speaker rating.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633195999302,"sku":"PRX46","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/715Vhu4JaIL.jpg?v=1784413577"},{"product_id":"memphis-prx60-6-5-oversized-2-way-coaxial-speakers","title":"Memphis PRX60 6.5\" Oversized 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX60 is a pair of 6.5-inch oversized, 2-way coaxial car speakers from the Power Reference line. It is designed as a practical replacement or upgrade for compatible factory speaker locations. The coaxial layout combines a woofer and tweeter in each speaker for a compact full-range installation.\u003c\/p\u003e\u003cp\u003eThese speakers suit listeners replacing worn factory drivers or building a modest audio-system upgrade without moving to separate component speakers. Each speaker is rated for 50 watts RMS and 100 watts peak power at 4 ohms. Their 88 dB sensitivity supports use with appropriately matched factory or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe PRX60 uses a polypropylene woofer cone with a polyurethane surround, paired with a PEI dome tweeter. This material combination is intended to provide a durable moving assembly for everyday vehicle use. The speaker’s published frequency response is 73 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eA multi-direction pivot tweeter system allows the high-frequency driver to be aimed after installation. This can help direct upper-frequency output toward the listening area when the speakers are installed low in doors or other off-axis factory locations. An integrated 6 dB tweeter crossover is included within the coaxial design.\u003c\/p\u003e\u003cp\u003eThe oversized 6.5-inch format fits many common speaker positions, but vehicle fitment should always be checked against the mounting dimensions before purchase. The PRX60 has a 2.5-inch listed mounting depth and a 5-9\/16-inch cutout requirement. It is supplied as a pair with grilles and installation hardware for a more complete replacement-speaker package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports properly matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Lets installers aim the tweeter after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Filters the tweeter within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversized 6.5-Inch Fitment:\u003c\/strong\u003e Suits many compatible factory speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX60 uses a graphite-reinforced polypropylene cone design, polyurethane surround, PEI dome tweeter, and 10-ounce magnet structure. Its black-on-black M-Cone appearance keeps the presentation understated behind factory grilles or when using the included grilles. The speakers are built as conventional 4-ohm coaxial replacements rather than separate woofer-and-tweeter component sets.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle’s available mounting depth, cutout diameter, and mounting-hole pattern before installation. The published top-mount depth is 2-9\/16 inches, bottom-mount depth is 2-3\/4 inches, and cutout diameter is 5-9\/16 inches. Connect each speaker with correct positive and negative polarity, use an audio source or amplifier compatible with a 4-ohm load, and set amplifier gain appropriately for the 50-watt RMS rating.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633196556358,"sku":"PRX60","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/812z0aLlUbL.jpg?v=1784413727"},{"product_id":"memphis-prx602-6-5-2-way-coaxial-car-speakers","title":"Memphis PRX602 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX602 is a pair of 6.5-inch, 2-way coaxial car speakers designed as a straightforward replacement or upgrade for many factory speaker locations. They combine a woofer and tweeter in each speaker, allowing installation without separate external crossover networks. This makes them suitable for drivers replacing worn factory speakers or building an entry-level aftermarket audio system.\u003c\/p\u003e\u003cp\u003eEach PRX602 speaker is rated to handle 50 watts RMS and 100 watts peak power at 4 ohms. That power range works with many factory radios while also providing a sensible match for a modest aftermarket amplifier. With 88 dB sensitivity, the speakers are intended for everyday in-car listening rather than high-power competition systems.\u003c\/p\u003e\u003cp\u003eThe coaxial design uses a graphite-reinforced polypropylene cone for the woofer and a PEI dome tweeter for high frequencies. Its pivoting tweeter can be aimed toward the listening area to help tailor high-frequency direction in installations where the speakers are mounted low in doors or off-axis. An integrated 6 dB tweeter crossover is included within the speaker assembly.\u003c\/p\u003e\u003cp\u003eMemphis specifies a butyl rubber surround and a 10-ounce magnet structure for this model. The black speaker design is intended to blend into factory-style locations, and protective grilles are included for custom or exposed installations. The specified frequency response is 100 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eThe PRX602 can serve as front or rear full-range speakers in a compatible vehicle, provided the mounting dimensions and speaker fitment are verified first. They are sold as a pair, so two pairs may be used for vehicles with four compatible speaker locations. For amplified systems, choose an amplifier whose clean per-channel output is appropriate for the speakers' 50-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for simplified replacement installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports moderate factory-radio or aftermarket-amplifier power levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting PEI Tweeter:\u003c\/strong\u003e Lets the installer direct treble toward the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Filters the tweeter within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphite-Reinforced Polypropylene Cone:\u003c\/strong\u003e Provides the woofer cone material specified for this model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Speaker Grilles:\u003c\/strong\u003e Adds protection for installations with exposed speaker faces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX602 uses a graphite-reinforced polypropylene woofer cone, butyl rubber surround, PEI dome tweeter, and 10-ounce magnet structure. Its black finish and coaxial layout provide a clean appearance in replacement or custom speaker locations. The tweeter is mounted centrally and uses a multi-direction pivot system.\u003c\/p\u003e\u003cp\u003eVerify vehicle-specific fitment before purchase, including the 4-7\/8-inch cutout requirement and available mounting clearance. The listed top-mount depth is 2-1\/4 inches, while the bottom-mount depth is 2-11\/16 inches. The package includes two speakers, two grilles, mounting hardware, speaker leads, and a mounting template; adapters or vehicle-specific harnesses may still be required for a factory installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633196687430,"sku":"PRX602","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81EByFiD29L.jpg?v=1784413770"},{"product_id":"memphis-prx6902-6x9-2-way-coaxial-speakers","title":"Memphis PRX6902 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX6902 is a pair of 6x9-inch, 2-way coaxial car speakers from the Power Reference series. It is designed to replace compatible factory speakers with a full-range speaker solution that combines a woofer and tweeter in each location. This makes it a practical option for vehicles that use 6x9-inch speaker positions and need an audio-system refresh.\u003c\/p\u003e\u003cp\u003eEach speaker handles up to 60 watts RMS and 120 watts peak at a 4-ohm impedance. With 90 dB sensitivity and a 55 Hz to 20 kHz frequency response, the PRX6902 is suited to factory-radio upgrades as well as modest aftermarket amplification. Its 2-way configuration covers bass, midrange, and treble from a single coaxial assembly.\u003c\/p\u003e\u003cp\u003eThe woofer uses a polypropylene cone with a polyurethane surround. This material combination is intended to provide controlled cone movement while supporting regular in-vehicle use. A PEI dome tweeter handles high-frequency reproduction and is mounted within the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eMemphis equips the PRX6902 with a pivot-mount, multi-direction tweeter system. The tweeter can be aimed to help tailor high-frequency direction for the installation location. An integrated 6 dB tweeter crossover is also specified to manage the transition to the tweeter.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a straightforward front- or rear-speaker replacement plan, and they can also be used as part of a larger system with a separate subwoofer for deeper bass. Verify available mounting depth, mounting-hole pattern, and vehicle-specific adapter needs before installation. The pair includes protective grilles and installation hardware for applications where those parts are needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports continuous power up to 60 watts each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies through a dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6902 uses a black Power Reference design with a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and 14-ounce magnet. Each speaker is a 4-ohm, 2-way coaxial unit with a specified 3-inch mounting depth. Protective grilles are included, and retailer package documentation identifies black steel-mesh grilles with plastic frames.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and has adequate depth behind the mounting surface before ordering. The package is listed with two speakers, two 12-inch speaker leads, two grilles, eight 1-3\/8-inch screws, and eight speed clips. Use vehicle-specific mounting adapters or wiring harnesses when the factory opening or connector differs from the included hardware.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633197211718,"sku":"PRX6902","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81wLgswXRPL.jpg?v=1784414019"},{"product_id":"memphis-prx6903-6x9-3-way-coaxial-car-speakers","title":"Memphis PRX6903 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX6903 is a pair of 6x9-inch, 3-way coaxial car speakers designed as a direct-size audio upgrade for compatible factory speaker locations. It combines woofer, midrange, and tweeter elements into each speaker to provide full-range playback from a single mounting position. This makes it a practical option for replacing worn or limited factory 6x9 speakers.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 120 watts peak power handling per speaker, the PRX6903 is suited to systems that need a moderate-power full-range speaker. Its 90 dB sensitivity supports efficient operation in a variety of car-audio installations. The 4-ohm design is compatible with common aftermarket speaker outputs.\u003c\/p\u003e\u003cp\u003eThe 3-way coaxial layout is intended to bring midrange and high-frequency detail into the same location as the 6x9 woofer. A PEI dome tweeter handles the upper frequencies, while the multi-direction pivot tweeter system allows the tweeter angle to be adjusted for the installation. This can help direct high-frequency sound toward the listening area where space permits.\u003c\/p\u003e\u003cp\u003eMemphis uses a polyurethane surround and stealthy black-on-black M-Cone design for the PRX6903. The surround supports cone movement while contributing to the speaker's durable construction. Its integrated appearance suits installations where the speaker may be visible behind a grille or rear deck opening.\u003c\/p\u003e\u003cp\u003eThe PRX6903 fits into a system upgrade path for vehicles that use 6x9-inch speakers and have sufficient mounting clearance. It can be used as a replacement pair or matched with other compatible full-range speakers in a larger system. Grilles, speaker leads, mounting hardware, and a user manual are included for installation flexibility.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Size:\u003c\/strong\u003e Fits compatible 6x9-inch factory or custom speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, midrange, and tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports 60 watts RMS and 120 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Adds protection and installation flexibility where speakers are exposed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6903 uses a polyurethane surround, PEI dome tweeter, and black-on-black M-Cone design. Each speaker has a 14-ounce magnet and a 3-inch mounting depth. The pair is supplied with two grilles for installations that require visible speaker protection.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and provides at least 3 inches of mounting depth before installation. Match the speakers to a compatible 4-ohm source or amplifier and avoid exceeding their 60-watt RMS rating per speaker. The package includes two 12-inch speaker leads, eight screws, eight speed clips, and a user manual; vehicle-specific mounting adapters or wiring interfaces may still be needed depending on the vehicle.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633197375558,"sku":"PRX6903","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81BQIsBDF9L.jpg?v=1784414063"},{"product_id":"pioneer-ts-a301tw-0-75-component-dome-tweeters","title":"Pioneer TS-A301TW 0.75\" Component Dome Tweeters","description":"\u003cp\u003eThe Pioneer TS-A301TW is a pair of 20 mm component dome tweeters designed to add dedicated high-frequency reproduction to a car audio system. They are suited to listeners who want clearer treble detail than a full-range factory speaker location may provide. An included inline high-pass network is specified for use with the tweeters to help direct appropriate frequencies to the drivers.\u003c\/p\u003e\u003cp\u003eEach tweeter uses a polyetherimide (PEI) hard-dome diaphragm and a neodymium magnet. This combination is designed for controlled high-frequency output in a compact package. With a stated frequency response extending from 1.8 kHz to 58 kHz, the TS-A301TW is intended to reproduce upper-midrange and treble information.\u003c\/p\u003e\u003cp\u003eThe TS-A301TW is rated for 100 watts RMS and 450 watts maximum music power, with ratings specified as equivalent to 4 ohms. Its 90 dB sensitivity rating is measured at 1 watt\/1 meter. The nominal impedance is 6 ohms, so amplifier and speaker-system compatibility should be considered before installation.\u003c\/p\u003e\u003cp\u003eThese tweeters are a practical add-on for systems that need more high-frequency presence from the front stage. They can complement compatible midrange or full-range speakers when installed with the supplied network. The 3,800 Hz crossover frequency helps define where the dedicated tweeter begins its intended operating range.\u003c\/p\u003e\u003cp\u003ePioneer includes Multi-Fit installation adapters to support different mounting approaches and applicable original-equipment tweeter locations. The package also includes mounting hardware, brackets, wire adapters, and inline networks. This makes the TS-A301TW well suited to a component-style upgrade where vehicle space and mounting depth have been checked in advance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm PEI Dome:\u003c\/strong\u003e A hard-dome tweeter diaphragm handles detailed upper frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Rating:\u003c\/strong\u003e Supports systems with appropriately matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e450W Maximum Power:\u003c\/strong\u003e Provides a stated maximum music-power handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.8 kHz–58 kHz Response:\u003c\/strong\u003e Covers upper-midrange and high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline High-Pass Network:\u003c\/strong\u003e Helps route suitable frequencies to each tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Fit Adapters:\u003c\/strong\u003e Supports flexible mounting in compatible vehicle locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A301TW uses a 20 mm PEI hard-dome diaphragm paired with a neodymium magnet. Each tweeter has a compact 50 mm outside diameter and a stated 16 mm mounting depth. No speaker grilles are included.\u003c\/p\u003e\u003cp\u003eUse the included inline high-pass network; Pioneer cautions against operating the tweeter independently of its specified network. Confirm the available mounting space, 38 mm cutout requirement, and vehicle-specific wiring before installation. The supplied adapters, brackets, wire adapters, foam gaskets, covers, clips, and screws support several installation arrangements.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633228996678,"sku":"TS-A301TW","price":60.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61xPVAGOIUL.jpg?v=1784419035"},{"product_id":"pioneer-ts-b351pro-3-5-bullet-tweeters","title":"Pioneer TS-B351PRO 3.5\" Bullet Tweeters","description":"\u003cp\u003eThe Pioneer TS-B351PRO is a pair of 3.5-inch bullet tweeters designed to add focused high-frequency output to a car-audio system. It is built for listeners assembling high-sensitivity systems where clear upper-frequency reproduction is needed alongside mid-bass drivers and subwoofers. With a 3,000 Hz to 22,000 Hz frequency response, it is intended to handle the upper range rather than full-range or bass duties.\u003c\/p\u003e\u003cp\u003ePart of Pioneer’s P.R.O. Series, the TS-B351PRO is suited to open-show and high-SPL-oriented installations. Its 100 dB sensitivity rating helps it produce substantial output from available amplifier power. The 4-ohm nominal impedance makes it suitable for use with compatible car-audio amplification and crossover arrangements.\u003c\/p\u003e\u003cp\u003eThe tweeter uses a titanium diaphragm in a horn-style bullet design. This combination is designed for direct, efficient high-frequency projection in systems that need to remain audible at elevated listening levels. Pioneer rates the pair at 150 watts nominal power handling and 300 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eAn aluminum die-cast chassis supports the tweeter assembly, while a ferrite magnet provides the motor structure. The field-serviceable tweeter unit can be repaired using Pioneer’s compatible replacement diaphragm repair kit. This makes the TS-B351PRO a practical choice for systems where serviceability is important.\u003c\/p\u003e\u003cp\u003eThese tweeters work best as part of a properly filtered multi-speaker setup, not as standalone speakers. Pioneer specifies a 3,000 Hz crossover frequency and instructs installers to use the specified network. Pair them with appropriately crossed-over mid-bass speakers, a compatible amplifier, and secure mounting hardware for a balanced system upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Bullet Tweeters:\u003c\/strong\u003e Focused high-frequency drivers for multi-speaker car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragms:\u003c\/strong\u003e Provide a durable diaphragm material for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Nominal Handling:\u003c\/strong\u003e Supports amplified systems with appropriate crossover protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output with available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many compatible car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-Serviceable Design:\u003c\/strong\u003e Allows replacement of the tweeter diaphragm assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-B351PRO combines a titanium tweeter diaphragm with an aluminum die-cast chassis and ferrite magnet. Its bullet-style, horn-oriented layout is made for efficient high-frequency output, and the chassis is designed to provide a rigid mounting structure. No speaker grilles are included.\u003c\/p\u003e\u003cp\u003eConfirm fitment before installation: each tweeter requires a 3-inch cutout and 1-3\/4-inch mounting depth, with a 4-inch outer diameter. Mounting screws are included, but the system must use the specified crossover network; Pioneer cautions against operating the speaker independently. Secure the capacitor body and lead wire after wiring, and keep capacitor leads away from metal parts.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633235320902,"sku":"TS-B351PRO","price":91.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71YaxsnbEYL.jpg?v=1784419757"},{"product_id":"pioneer-ts-t110-7-8-hard-dome-tweeters","title":"Pioneer TS-T110 7\/8\" Hard Dome Tweeters","description":"\u003cp\u003eThe Pioneer TS-T110 is a pair of compact 7\/8-inch hard dome tweeters made to add dedicated high-frequency output to a car audio system. They are suited to replacing worn factory tweeters or supplementing a system that lacks upper-frequency detail. With a 4-ohm nominal impedance and 40-watt nominal power handling, they are designed for use with compatible car audio amplification.\u003c\/p\u003e\u003cp\u003eThese tweeters cover a 2,500 Hz to 30,000 Hz frequency range, focusing on the upper range of music where vocal detail, cymbals, strings, and ambient information are heard. Their 90 dB sensitivity rating supports clear output from modest power. The result is a focused high-frequency addition rather than a full-range speaker replacement.\u003c\/p\u003e\u003cp\u003ePioneer specifies a 22 mm PPTA hard dome tweeter design with a lightweight polyimide diaphragm and a uniquely shaped wave guide. This engineering is intended to support wide dispersion from a small mounting footprint. A heat-resistant voice coil, magnetic fluid, and strontium magnet are also listed in the original product specifications.\u003c\/p\u003e\u003cp\u003eThe TS-T110 includes high-pass filtering at 7,000 Hz with a 6 dB-per-octave slope to protect the tweeters from lower-frequency content. This makes the pair appropriate for use as dedicated high-frequency drivers in a properly configured speaker system. Match them with compatible front speakers and an audio source or amplifier that supports the system's impedance and power requirements.\u003c\/p\u003e\u003cp\u003eFlexible flush- and surface-mount options help the TS-T110 fit common door-panel, dash-corner, and trim-panel locations. Its 2-inch mounting-hole requirement and 3\/4-inch mounting depth should be checked against the selected installation point before purchase. Proper placement, secure mounting, and correct polarity are important for balanced stereo imaging and reliable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e22 mm Hard Dome:\u003c\/strong\u003e Compact 7\/8-inch tweeters handle dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Maximum Power:\u003c\/strong\u003e Rated for 120 watts maximum and 40 watts nominal power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,500–30,000 Hz Response:\u003c\/strong\u003e Covers the upper-frequency range for added detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports clear output with compatible low-to-moderate power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In High-Pass Filtering:\u003c\/strong\u003e 7,000 Hz, 6 dB-per-octave filtering limits low-frequency content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Mounting Choices:\u003c\/strong\u003e Supports flush or surface mounting for installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-T110 uses a compact 22 mm PPTA hard dome design with a heat-resistant voice coil, magnetic fluid, and a 22 g strontium magnet. Pioneer also specifies a lightweight polyimide tweeter diaphragm and uniquely shaped wave guide. The assembly has a metal-mesh and heat-resistant-resin grille construction listed in the original specifications.\u003c\/p\u003e\u003cp\u003eFor flush installation, allow for a 2-inch mounting hole, 3\/4-inch mounting depth, and approximately 3\/8-inch protrusion. Surface mounting is also supported, with the original installation guide showing door-side and dashboard-corner placement examples. Use the specified high-pass-filtered connection arrangement, observe positive and negative polarity, and verify available panel depth before cutting or drilling.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633279066182,"sku":"TS-T110","price":70.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61B6JAgIYJL.jpg?v=1784420110"},{"product_id":"rockford-fosgate-m2-ts-1-marine-tweeter-kit","title":"Rockford Fosgate M2-TS 1\" Marine Tweeter Kit","description":"\u003cp\u003eThe Rockford Fosgate M2-TS is a pair of 1-inch add-on marine tweeters designed to extend high-frequency output in compatible audio systems. It is intended for boat, powersports, and other open-air installations where full-range speakers may benefit from added treble presence. The kit is designed to complement Rockford Fosgate M1 and M2 Color Optix full-range speakers.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 200-watt RMS power handling, and 97 dB sensitivity rated at 2.83V\/1m, the M2-TS is built for efficient high-frequency reproduction. Its aluminum diaphragm and neodymium motor structure support detailed upper-frequency playback. A marine-grade PEI rubber surround and high-temperature Kapton voice-coil former support demanding outdoor use.\u003c\/p\u003e\u003cp\u003eA sealed external passive high-pass crossover is included with each tweeter. The crossover uses an 18 dB-per-octave slope to direct appropriate frequencies to the tweeters while helping protect them from lower-frequency content. Metalized polyester film capacitors are used in the crossover design.\u003c\/p\u003e\u003cp\u003eThe Element Ready construction addresses the conditions commonly found in marine and motorsports installations. The front and grille are rated IPX6, while the frame is rated IPX5. UV-stable ASA plastic, stainless-steel mesh protection, and gold-plated marine-grade brass terminals help support use around water spray, sunlight, and corrosive environments.\u003c\/p\u003e\u003cp\u003eThe M2-TS kit offers two mounting approaches to suit different installation layouts. Use the included rear-mount flush hardware for a compact, integrated appearance, or use the included white horn-loading mounting flanges for more focused projection. It is a practical upgrade for listeners who want to add dedicated high-frequency coverage without replacing their compatible full-range speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Tweeters:\u003c\/strong\u003e Dedicated tweeters add upper-frequency detail to compatible speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Handling:\u003c\/strong\u003e Supports higher-output marine and motorsports audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 dB\/Octave Crossover:\u003c\/strong\u003e Filters low frequencies before they reach the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e IPX6 front\/grille and IPX5 frame resist water spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Mounting Options:\u003c\/strong\u003e Included flush and horn-loading hardware supports flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Terminals:\u003c\/strong\u003e Gold-plated brass connections resist corrosion in outdoor environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M2-TS uses an aluminum diaphragm, marine-grade PEI rubber surround, high-temperature Kapton voice-coil former, and dual neodymium motor structure. Its UV-stable ASA frame and grille construction are paired with a stainless-steel mesh grille for added protection. The external crossover is fully sealed for marine-oriented installation environments.\u003c\/p\u003e\u003cp\u003eFor flush mounting, the installation requires a 1.75-inch mounting hole and uses the included clamp system. The optional horn-loading flange requires a 3-5\/8-inch mounting hole and includes an O-ring. Connect each tweeter through its included external crossover, observe the white-positive and black-negative speaker-wire polarity, and confirm amplifier stability when wiring the tweeters with compatible M2 full-range speakers.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45633846902854,"sku":"M2-TS","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61H2sZqHxYL.jpg?v=1784425843"},{"product_id":"rockford-fosgate-p1t-s-punch-1-tweeter-kit","title":"Rockford Fosgate P1T-S Punch 1\" Tweeter Kit","description":"\u003cp\u003eThe Rockford Fosgate P1T-S is a pair of 1-inch car-audio tweeters designed to add focused high-frequency detail to an existing speaker system. It is suited to vehicles with dull, missing, or poorly positioned factory tweeters, as well as custom installations that need dedicated high-frequency drivers. The kit includes external passive crossovers to help route appropriate frequencies to the tweeters.\u003c\/p\u003e\u003cp\u003eEach P1T-S uses a treated PEI dome diaphragm and a 4-ohm design. Its specified 3.5 kHz to 22 kHz frequency response targets the upper-frequency range where vocal articulation, cymbal detail, and spatial cues are heard. With 60 watts RMS power handling for the system, these tweeters are intended for properly matched aftermarket amplification or speaker-level systems used within their ratings.\u003c\/p\u003e\u003cp\u003eThe included crossover network uses a 3.5 kHz high-pass point with a 12 dB-per-octave Butterworth slope. This helps prevent excessive low-frequency energy from reaching the small tweeter diaphragms. Selectable 0 dB, -2 dB, and -4 dB tweeter-level settings allow the installer to reduce output when a vehicle's mounting position makes the high frequencies too prominent.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's DDC Discreet Dual Clamp mounting system is designed to support clean integration in door panels, sail panels, dashboards, or custom pods. The P1T-S can be mounted flush or surface-mounted with an angled presentation option. This flexibility can help aim high-frequency output toward the listening area when factory locations are limited.\u003c\/p\u003e\u003cp\u003eThe P1T-S works well as an add-on high-frequency upgrade alongside compatible midrange or midbass speakers. It is a dedicated tweeter kit rather than a full component speaker set, so it does not include woofers. For a balanced system, use its supplied crossovers and pair it with speakers that can cover the frequencies below the tweeters' high-pass range.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome:\u003c\/strong\u003e Treated dome design reproduces upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-Watt RMS Rating:\u003c\/strong\u003e Supports properly matched aftermarket system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio speaker system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e High-pass filtering protects the tweeters from lower frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Level Settings:\u003c\/strong\u003e Choose 0 dB, -2 dB, or -4 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDDC Mounting System:\u003c\/strong\u003e Supports flush and angled surface installation options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1T-S uses black 1-inch treated PEI dome tweeters with Rockford Fosgate's DDC mounting arrangement. The compact driver format is paired with separate crossover housings, allowing the crossover components to be positioned away from the visible tweeter location. The kit's specified net weight is 1.20 pounds.\u003c\/p\u003e\u003cp\u003eFor flush mounting, the specified cutout is 1.75 inches and the mounting depth is 0.91 inch. Use the included crossover between the audio source or amplifier output and each tweeter, following polarity and the crossover terminal markings. The supplied mounting hardware supports flush and surface mounting, including an angled surface-mount configuration, so placement can be chosen for vehicle fitment and listening direction.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634171109446,"sku":"P1T-S","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61KbgQ7oaJL.jpg?v=1784428424"},{"product_id":"rockford-fosgate-p2v2-ts-3-4-convertible-tweeter-kit","title":"Rockford Fosgate P2V2-TS 3\/4\" Convertible Tweeter Kit","description":"\u003cp\u003eThe Rockford Fosgate P2V2-TS is a pair of 3\/4-inch car-audio tweeters designed to add or replace high-frequency drivers in an OEM or custom system. It is intended for vehicles with a dedicated tweeter location, such as a dash or A-pillar position, as well as installations that need an added high-frequency stage. The kit includes the necessary passive crossover networks to filter the signal for the tweeters.\u003c\/p\u003e\u003cp\u003eThese 4-ohm tweeters are suited to listeners replacing frequency-limited factory tweeters or building a component-style front stage. Their 3.5 kHz to 25 kHz frequency response focuses on upper-frequency detail, while the 90 dB sensitivity rating helps them work efficiently with compatible amplification. The supplied crossover offers a standard 0 dB input and an optional -3 dB input for adjusting tweeter level.\u003c\/p\u003e\u003cp\u003eEach P2V2-TS uses a 3\/4-inch Tetolon inverted-dome design. The compact driver size supports placement where a larger tweeter will not fit, while the supplied cups provide two installation approaches. Flush mounting creates a more integrated appearance, while surface mounting can simplify placement in an exposed location.\u003c\/p\u003e\u003cp\u003ePower handling is rated at 75 watts RMS and 150 watts peak for the kit's specified configuration. The included passive crossover uses a 9 kHz, 12 dB-per-octave high-pass filter to direct appropriate frequencies to the tweeters. This makes the P2V2-TS a focused high-frequency addition rather than a full-range speaker replacement.\u003c\/p\u003e\u003cp\u003eThe package is designed for a complete left-and-right installation, with two tweeters, two crossover networks, mounting cups, wiring extensions, hardware, connectors, and zip ties included. It can be used as part of a planned speaker upgrade where mounting depth, cutout size, impedance, and wiring route have been checked in advance. Professional installation is a practical option when integrating with factory wiring or mounting in vehicle trim panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-Inch Tetolon Dome:\u003c\/strong\u003e Compact inverted-dome tweeters reproduce the upper-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Design:\u003c\/strong\u003e Matches the specified nominal impedance for compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Supports systems rated within its continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossovers Included:\u003c\/strong\u003e Filters low frequencies before they reach the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose standard 0 dB or reduced -3 dB input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush Or Surface Mounting:\u003c\/strong\u003e Included cups support two common installation styles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2V2-TS uses Tetolon inverted-dome tweeters and includes dedicated flush-mount and surface-mount cups. Copper spring contacts in the cups allow front-side tweeter servicing with the included removal tool. The kit also includes two passive crossover networks, with separate mounting screws for the tweeters and crossovers.\u003c\/p\u003e\u003cp\u003eConfirm available space before installation: flush mounting requires a 1.54-inch cutout and 0.78 inch of mounting depth, while surface mounting uses a 1.22-inch mounting diameter and 0.57 inch of depth. Route wiring before mounting, observe positive and negative polarity, and use the included crossover networks according to the installation instructions. The included 18-inch crossover extensions, crimp butt connectors, and zip ties support a tidy installation.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634310733894,"sku":"P2V2-TS","price":279.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/516MIYTy5eL.jpg?v=1784430389"},{"product_id":"rockford-fosgate-r1t-s-1-tweeter-kit-pair","title":"Rockford Fosgate R1T-S 1\" Tweeter Kit (Pair)","description":"\u003cp\u003eThe Rockford Fosgate Prime R1T-S is a pair of compact 1-inch car-audio tweeters designed to add dedicated high-frequency detail to an existing speaker system. It is a practical option when factory speakers lack clarity in vocals, cymbals, and other upper-range content. The kit uses 4-ohm tweeters and is intended for vehicle audio installations.\u003c\/p\u003e\u003cp\u003eThis kit is suited to listeners building a basic component-style front stage or replacing damaged factory tweeters. Its compact size and included mounting options make it useful for locations such as sail panels, door panels, dash locations, or custom pods where space permits. Flush, surface, and angle-mount hardware supports different installation approaches.\u003c\/p\u003e\u003cp\u003eThe R1T-S uses Mylar balanced-dome tweeters, a lightweight diaphragm design intended to reproduce upper frequencies with controlled detail. Its specified frequency response is 2.5 kHz to 22 kHz, covering the high-frequency range that smaller full-range door speakers may not reproduce as effectively. Sensitivity is rated at 72.5 dB at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eEach tweeter has an integrated passive high-pass crossover, so the driver is filtered from lower frequencies that are better handled by a midrange or woofer. The crossover is specified at 4.5 kHz with a 6 dB-per-octave slope. This simplifies adding the tweeters to a compatible speaker system while maintaining the intended high-frequency role.\u003c\/p\u003e\u003cp\u003eWith 40 watts RMS and 80 watts maximum power handling, the R1T-S can be matched with modest aftermarket amplification or an appropriately powered head-unit system. The kit is sold as a pair and includes grilles, trim rings, mounting hardware, and flush\/surface\/angle mounts. It can serve as a focused high-frequency upgrade alongside compatible door speakers or component-system midrange drivers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Tweeter Kit:\u003c\/strong\u003e Adds dedicated high-frequency output to a vehicle sound system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMylar Balanced Dome:\u003c\/strong\u003e Lightweight diaphragm supports extended high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Pass Crossover:\u003c\/strong\u003e Helps protect the tweeters from lower-frequency content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Handling:\u003c\/strong\u003e Matches appropriately powered aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Supports flush, surface, and angle installation configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair With Installation Hardware:\u003c\/strong\u003e Includes mounts, grilles, trim rings, and mounting hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R1T-S uses black Mylar balanced-dome tweeters with included grilles and trim rings for a finished appearance. The compact kit is built around a 0.5-inch voice coil and 1-inch nominal tweeter format. Its supplied mounting pieces allow the installer to select a mounting presentation appropriate to the vehicle panel and listening position.\u003c\/p\u003e\u003cp\u003eFor flush mounting, allow for a 0.76-inch mounting depth and a 1.83-inch mounting diameter; the flush-mount assembly has a 2.13-inch outside diameter. Surface or angle mounting requires 1.06 inches of depth, with a 1.81-inch mounting diameter. Maintain correct speaker polarity and use the integrated high-pass crossover when wiring the tweeters into a compatible system.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45639859601478,"sku":"R1TS","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51O5MOhpw0L.jpg?v=1784434643"},{"product_id":"rockford-fosgate-t1t-s-1-component-tweeter-kit","title":"Rockford Fosgate T1T-S 1\" Component Tweeter Kit","description":"\u003cp\u003eThe Rockford Fosgate T1T-S is a pair of 1-inch component tweeters made to add dedicated high-frequency reproduction to a vehicle audio system. It is suited to replacing worn factory tweeters or building a component system with separate woofer and tweeter placement. The included passive crossovers help protect the tweeters by directing appropriate high-frequency content to them.\u003c\/p\u003e\u003cp\u003eEach T1T-S uses a treated fabric dome with an integral suspension and neodymium motor structure. This design is intended for smooth, detailed treble reproduction across its specified 3 kHz to 22 kHz frequency range. With 90 dB sensitivity, the kit can integrate with a range of compatible aftermarket amplification setups.\u003c\/p\u003e\u003cp\u003eThe included external high-pass crossover network operates at 3 kHz with an 18 dB-per-octave Butterworth slope. It provides selectable tweeter attenuation at 0 dB, -2 dB, or -4 dB to help balance output with the rest of the system. The crossover also provides on-axis and off-axis output options for adapting the tweeter setup to its mounting location.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a central part of the T1T-S kit. It includes flush-mount and surface-mount hardware, allowing installers to place the tweeters in panels, pillars, sail panels, or other suitable locations. The flush installation uses a standard 1-3\/4-inch mounting opening and has a shallow mounting depth.\u003c\/p\u003e\u003cp\u003eThe T1T-S works well as the high-frequency section of a custom component speaker upgrade. Its 4-ohm nominal impedance and 75-watt RMS power rating should be matched with an appropriately configured amplifier or speaker channel. Dedicated crossover wiring and included connector leads simplify integration when used according to the installation instructions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Fabric Dome:\u003c\/strong\u003e Treated dome design reproduces dedicated high-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Handling:\u003c\/strong\u003e Supports compatible amplified component-system installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal High-Pass Crossover:\u003c\/strong\u003e Filters low frequencies at 3 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Attenuation:\u003c\/strong\u003e Provides 0 dB, -2 dB, and -4 dB settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e Includes flush and surface installation hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDDC Tweeter Mount:\u003c\/strong\u003e Uses a discreet clamping flush-mount system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1T-S combines a treated fabric dome, integral suspension, and neodymium motor structure in a compact tweeter assembly. Its Discreet Dual Clamp mounting arrangement secures the flush-mount hardware around the mounting opening, while the tweeter uses a snap-in fit and trim ring. The protective grille is integral to the tweeter design and is not removable.\u003c\/p\u003e\u003cp\u003eFor flush mounting, use a standard 1-3\/4-inch hole saw opening and allow approximately 0.91 inch of mounting depth. Connect each tweeter through its supplied external high-pass crossover, observing polarity and using only one selected positive attenuation terminal. Surface hardware offers approximately 10-degree or 30-degree mounting angles where aiming toward the listening area is preferred.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45656551325766,"sku":"T1T-S","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/615gQ27KmXL.jpg?v=1784444266"},{"product_id":"rockford-fosgate-t2t-s-1-aluminum-dome-tweeter-kit","title":"Rockford Fosgate T2T-S 1\" Aluminum Dome Tweeter Kit","description":"\u003cp\u003eThe Rockford Fosgate T2T-S is a pair of 1-inch aluminum dome tweeters designed for adding dedicated high-frequency reproduction to a car audio system. It is intended for listeners building or upgrading a component-style front stage rather than relying on full-range door speakers alone. Each kit includes a dedicated high-pass crossover to route appropriate frequencies to the tweeters.\u003c\/p\u003e\u003cp\u003eThis kit is suited to installations where clearer upper-frequency detail and more focused treble placement are desired. The 4-ohm tweeters are rated for 75 watts RMS and 150 watts peak power per set. Their 3 kHz to 22 kHz frequency-response specification supports use above a compatible midrange or woofer section.\u003c\/p\u003e\u003cp\u003eThe T2T-S uses 1-inch aluminum dome tweeters with a 1-inch voice coil and a published sensitivity of 90 dB at 1 watt\/1 meter. The supplied high-pass Butterworth crossover is specified at 3 kHz with an 18 dB-per-octave slope. This provides frequency filtering for the tweeters rather than requiring them to receive a full-range signal directly.\u003c\/p\u003e\u003cp\u003eIts crossover offers selectable tweeter-output connections for 0 dB, -2 dB, or -4 dB attenuation. An Axis switch provides ON and OFF settings to help accommodate tweeter placement relative to the listener. These provisions can be useful when mounting locations create different perceived treble levels from side to side or between vehicles.\u003c\/p\u003e\u003cp\u003eThe T2T-S can be used as part of a custom component-speaker system with compatible midrange drivers, amplifier channels, and source equipment. Rockford Fosgate recommends 22.5 to 75 watts RMS of amplifier power for the set. It is a dedicated tweeter system, so matching crossover points, power, and mounting locations should be considered when planning the overall system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact tweeter format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports use with appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated High-Pass Crossover:\u003c\/strong\u003e Filters low frequencies before they reach the tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Attenuation:\u003c\/strong\u003e Offers 0 dB, -2 dB, and -4 dB output settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxis Switch:\u003c\/strong\u003e Provides ON and OFF settings for placement-related tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Mounting Options:\u003c\/strong\u003e Includes hardware for surface, angle, and flush mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T2T-S employs aluminum dome tweeters, integral non-removable protective grilles, and Rockford Fosgate's Discreet Dual Clamp mounting design. The kit includes polished-aluminum and brushed-aluminum trim-ring sets, allowing the visible finish to be selected during installation. The flush-mount arrangement uses a 1.75-inch mounting hole and a center screw that applies clamping pressure around the opening.\u003c\/p\u003e\u003cp\u003eFor flush mounting, confirm clearance for the specified 0.95-inch mounting depth and use the included template to mark the opening. The kit includes a high-pass crossover, so wire the amplifier or source output to the crossover input and connect each tweeter with correct polarity. Select only one positive attenuation terminal on the T2T-S crossover—0 dB, -2 dB, or -4 dB—then set the Axis switch as appropriate for the installation.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45657221169222,"sku":"T2T-S","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ehhb0EgjL.jpg?v=1784444678"},{"product_id":"stx-audio-stx-55tw-3-4-super-tweeter","title":"STX Audio STX-55TW 3.4\" Super Tweeter","description":"\u003cp\u003eThe STX Audio STX-55TW is a 3.4-inch super tweeter designed to add dedicated high-frequency output to a car or pro-audio speaker system. It is intended for systems that need more presence and definition in the upper-frequency range than full-range speakers alone may provide. Its 4-ohm nominal impedance supports integration with compatible car-audio amplification and speaker networks.\u003c\/p\u003e\u003cp\u003eThis tweeter is aimed at enthusiasts building custom vehicle audio systems, including high-output setups that need a separate driver for treble detail. The listed 105 dB sensitivity supports efficient output from relatively modest amplifier power. Its stated frequency range of 2 kHz to 18 kHz focuses its role on upper-midrange and high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the moving diaphragm, paired with a CCAW voice coil. This combination is intended for the fast, controlled operation required of a high-frequency driver. The STX-55TW is rated for up to 800 watts maximum power handling; an RMS power rating is not confirmed.\u003c\/p\u003e\u003cp\u003eThe compact 3.4-inch format is suited to custom panels, speaker pods, and other locations where a dedicated tweeter can be positioned toward the listening area. It can complement midrange speakers or other drivers in a multi-way system rather than replace them. Proper frequency division is important because this is a super tweeter, not a full-range speaker.\u003c\/p\u003e\u003cp\u003eFor system upgrades, the STX-55TW can be used where clearer cymbals, vocal articulation, and upper-frequency detail are desired. Its listed 7.9-ounce magnet supports the driver assembly, while its metallic appearance coordinates with many custom-install applications. The standard STX-55TW listing is for one tweeter; separate paired listings are also sold under different package SKUs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many compatible car-audio amplifiers and speaker networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output in high-output system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Provides a rigid diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice-coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W Maximum Rating:\u003c\/strong\u003e Indicates the listed maximum power-handling specification, not RMS power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-55TW uses a titanium diaphragm and CCAW voice coil in a compact super-tweeter format. It has a listed metallic finish and a 7.9-ounce magnet. Product-listing dimensions are 2.5 x 4 x 4 inches, with a listed item weight of 0.66 kg.\u003c\/p\u003e\u003cp\u003eInstall the tweeter in a secure location aimed appropriately for the listening area, using a mounting arrangement suited to the vehicle or custom panel. Connect it by wire with correct polarity and pair it with a compatible amplifier or speaker circuit. Because no included crossover specifications are confirmed, use an appropriately selected high-pass crossover or active crossover setup to protect the tweeter from low-frequency content.\u003c\/p\u003e","brand":"STX Audio","offers":[{"title":"Default Title","offer_id":45661770580038,"sku":"STX-55TW","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71gwgEtmXAL.jpg?v=1784448408"},{"product_id":"stxaudio-stx-580tw-2-94-super-tweeter","title":"STXAudio STX-580TW 2.94\" Super Tweeter","description":"\u003cp\u003eThe STXAudio STX-580TW is a 2.94-inch super tweeter designed to add dedicated high-frequency output to a car-audio or professional audio speaker system. It is intended for listeners building a more detailed top end than a full-range or factory speaker setup can provide alone. With a 4-ohm nominal impedance, it is suited to systems using compatible external amplification or speaker channels.\u003c\/p\u003e\u003cp\u003eThis super tweeter is specified for a 3 kHz to 20 kHz frequency range, covering upper-frequency material such as vocal presence, percussion detail, and instrument overtones. Its 103 dB sensitivity rating indicates efficient output relative to input power. The result is a focused high-frequency driver meant to complement midrange and bass drivers rather than replace them.\u003c\/p\u003e\u003cp\u003eThe STX-580TW carries a 500-watt maximum power rating. Because a maximum rating is not the same as continuous RMS power handling, amplifier matching should be based on the amplifier's clean output, system crossover settings, and the complete speaker system. This approach helps keep the tweeter operating within an appropriate filtered frequency range.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the high-frequency radiating surface, while the voice coil uses CCAW construction. These confirmed design details support a lightweight moving assembly for upper-frequency reproduction. The compact 2.94-inch format is useful where installation space is limited.\u003c\/p\u003e\u003cp\u003eThe STX-580TW is a practical addition for custom car-audio builds that need a dedicated high-frequency driver. It can be integrated with compatible mids, woofers, and an appropriately configured crossover or high-pass filter. Confirm available mounting space, system impedance, and amplifier configuration before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.94-Inch Super Tweeter:\u003c\/strong\u003e Compact high-frequency driver format for custom audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Maximum Power:\u003c\/strong\u003e Supports systems designed for substantial peak power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many common car-audio amplifier and speaker configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e103 dB Sensitivity:\u003c\/strong\u003e Provides efficient output from a relatively compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a lightweight, rigid diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-580TW uses a compact super-tweeter layout with a titanium diaphragm and CCAW voice coil. Its 2.94-inch size helps it fit into installations where larger high-frequency drivers may not be practical. The product is specified as a super tweeter, so it is intended to work as part of a multi-driver system.\u003c\/p\u003e\u003cp\u003eInstall the tweeter securely in a location that preserves clearance and directs high-frequency output toward the listening area. Use a compatible 4-ohm amplifier channel or speaker network, and protect the driver with an appropriate high-pass crossover setting; no crossover frequency or included crossover is confirmed. Verify the mounting method, supplied accessories, and wiring requirements with the selling source before beginning the installation.\u003c\/p\u003e","brand":"STX Audio","offers":[{"title":"Default Title","offer_id":45661852860486,"sku":"STX-580TW","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ncqmA20RL.jpg?v=1784448445"},{"product_id":"stx-audio-stx-600tw-3-71-super-tweeter","title":"STX Audio STX-600TW 3.71\" Super Tweeter","description":"\u003cp\u003eThe STX Audio STX-600TW is a 3.71-inch super tweeter designed to add dedicated high-frequency output to a car audio system. It is intended for listeners building systems that need clearer treble presence alongside larger midrange speakers, subwoofers, or high-output bass sections. Its 4-ohm nominal impedance supports use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis model is built for the upper-frequency range, with a published frequency response of 2 kHz to 20 kHz. That makes it suited to reproducing details such as cymbals, vocal articulation, and other upper-register information that may be less prominent in bass-focused systems. The listed 105 dB sensitivity indicates efficient output relative to the power applied.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAW, or copper-clad aluminum wire. These materials are identified in the published product information and are central to the STX-600TW's driver construction. The speaker is rated at up to 1000 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eThe compact super-tweeter format makes the STX-600TW an option for custom car-audio installations where a dedicated treble driver is desired without using a full-size coaxial speaker. It can complement a system with separate mids and bass drivers by concentrating on the published 2 kHz to 20 kHz range. Proper system tuning remains important because this is a specialized high-frequency speaker rather than a full-range driver.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the STX-600TW is most appropriate in a properly designed multi-speaker system using compatible amplification and filtering. Its 4-ohm load should be matched to an amplifier channel that supports that impedance. Verify enclosure, mounting, crossover, and wiring requirements with the rest of the system before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.71-Inch Super Tweeter:\u003c\/strong\u003e Provides a compact dedicated driver for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with compatible 4-ohm car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Rating:\u003c\/strong\u003e Published maximum power-handling specification for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for the high-frequency driver assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses copper-clad aluminum wire in the voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-600TW combines a titanium diaphragm with a CCAW voice coil in a compact 3.71-inch super-tweeter format. Published product information lists a compact magnet size of 1.30 x 0.39 x 0.28 inches. Its design is focused on dedicated high-frequency reproduction rather than full-range playback.\u003c\/p\u003e\u003cp\u003eMount the tweeters securely in a location that supports their 3.71-inch form factor and directs high-frequency sound toward the listening area. Use a compatible 4-ohm amplifier channel and an appropriate crossover or high-pass filter so the driver is used within its published 2 kHz to 20 kHz frequency range. Set amplifier gain conservatively and follow the instructions for the amplifier and any external crossover used in the installation.\u003c\/p\u003e","brand":"STX Audio","offers":[{"title":"Default Title","offer_id":45661918756934,"sku":"STX-600TW","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/716enupN6_L.jpg?v=1784448485"},{"product_id":"stx-audio-stx-700tw-4-03-super-tweeter","title":"STX Audio STX-700TW 4.03\" Super Tweeter","description":"\u003cp\u003eThe STX Audio STX-700TW is a 4.03-inch super tweeter designed to add upper-frequency output to a car-audio speaker system. It is intended for listeners building systems that need dedicated high-frequency reproduction beyond what larger midrange or full-range drivers typically provide. Its published frequency response spans 2 kHz to 20 kHz.\u003c\/p\u003e\u003cp\u003eThis is a 4-ohm, wired tweeter with a published maximum power rating of 1,500 watts and a sensitivity rating of 105 dB. Those specifications position it for high-output vehicle-audio applications where efficient high-frequency output is important. An RMS power rating is not published in the available product information.\u003c\/p\u003e\u003cp\u003eThe STX-700TW uses a titanium diaphragm and a CCAW voice coil. Titanium is the stated diaphragm material, while the copper-clad aluminum wire voice coil is specified as part of the driver construction. The listed magnet weight is 12.3 ounces.\u003c\/p\u003e\u003cp\u003eAs a dedicated super tweeter, the STX-700TW is suited to complementing compatible midrange speakers, woofers, or subwoofers in a multi-driver system. Its 2 kHz to 20 kHz stated operating range focuses on the upper portion of the audible spectrum rather than bass reproduction. The 105 dB sensitivity specification indicates an efficient driver relative to the input signal.\u003c\/p\u003e\u003cp\u003eThe available product data identifies this as a single 4.03-inch driver for car-audio use. It can be considered for custom door-panel, dash, pillar, or enclosure applications only after confirming the actual mounting surface and clearances. Published information does not provide vehicle-specific fitment, cutout diameter, mounting depth, RMS power handling, or crossover details.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.03-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to a multi-speaker car-audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers the published upper-frequency operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible 4-ohm speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses titanium as the stated diaphragm material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STX-700TW combines a titanium diaphragm, CCAW voice coil, and a listed 12.3-ounce magnet assembly. It is a compact, wired dynamic-driver tweeter intended for car-audio systems. The published unit size is 4.03 inches, or approximately 10.2 cm.\u003c\/p\u003e\u003cp\u003eMatch the tweeter to a compatible 4-ohm channel and configure the system so it receives the appropriate high-frequency signal. Confirm mounting depth, cutout requirements, terminal access, protection method, and supplied hardware before installation, as these details are not published in the available specifications. A crossover is not listed as included, so verify all required signal-management components for the planned system.\u003c\/p\u003e","brand":"STX Audio","offers":[{"title":"Default Title","offer_id":45662875385926,"sku":"STX-700TW","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/pixelcut-export_3_4eb93f0b-8940-481d-b1e8-b80e7b7a4e62.jpg?v=1784449063"},{"product_id":"warzone-wz20tw-2-88-super-tweeter-speakers-pair","title":"Warzone WZ20TW 2.88\" Super Tweeter Speakers (Pair)","description":"\u003cp\u003eThe Warzone WZ20TW is a pair of compact 2.88-inch super tweeters intended to add high-frequency detail to a car-audio speaker system. They are designed for installations where larger speakers handle midrange and bass while dedicated tweeters reproduce upper-frequency content. Each tweeter has a 4-ohm nominal impedance for use with compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis pair is rated for up to 1,000 watts total maximum power, or 500 watts maximum per tweeter. A 105 dB sensitivity rating indicates that the tweeters are designed for efficient output when correctly integrated into an audio system. Their stated 2.5 kHz to 20 kHz frequency range focuses on the upper portion of the audible spectrum.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the high-frequency radiating surface, while the voice coil uses CCAW construction. These materials are specified for the WZ20TW and form the core of its compact super-tweeter design. The result is a purpose-built driver for adding treble presence rather than replacing a full-range speaker.\u003c\/p\u003e\u003cp\u003eThe WZ20TW uses a compact 25 mm x 5 mm magnet, also listed as 0.98 x 0.20 inches. This small magnet assembly can be useful where mounting space is limited. The speakers are wired, passive drivers and need an appropriate audio signal and system configuration.\u003c\/p\u003e\u003cp\u003eUse the WZ20TW pair as part of a properly balanced multi-speaker car-audio system. Match the system to the 4-ohm impedance and use suitable high-frequency filtering or crossover settings for tweeter operation. Because these are dedicated tweeters, they are most appropriate alongside midrange, coaxial, or component speakers that cover lower frequencies.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.88-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Includes two WZ20TW tweeters for stereo installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many compatible car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from a compatible system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragms:\u003c\/strong\u003e Specified diaphragm material for high-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Uses copper-clad aluminum wire voice-coil construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ20TW is a wired, passive dynamic tweeter with a titanium diaphragm, CCAW voice coil, and compact 25 mm x 5 mm magnet. Its 2.88-inch size supports placement in compact custom panels or other appropriate tweeter locations. The pair is intended for car-audio use and is listed with car mounting.\u003c\/p\u003e\u003cp\u003eConfirm that the amplifier or crossover can work with a 4-ohm tweeter load before wiring. Install the pair as high-frequency drivers in a balanced system, using appropriate crossover protection rather than sending low-frequency bass content to the tweeters. Mounting hardware, crossover components, and wiring details are not confirmed in the available product information, so verify package contents and installation needs before purchase.\u003c\/p\u003e","brand":"Warzone","offers":[{"title":"Default Title","offer_id":45668413276230,"sku":"WZ20TW","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71WTKPC2BXL.jpg?v=1784453083"},{"product_id":"warzone-wz25tw-2-93-super-tweeter-speakers","title":"Warzone WZ25TW 2.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Warzone WZ25TW is a pair of 2.93-inch super tweeters designed to add dedicated high-frequency output to a car-audio system. They are intended for listeners building or upgrading a system that needs clearer upper-frequency detail beyond what larger speakers may reproduce. Each tweeter uses a 4-ohm nominal impedance for compatibility with appropriately matched car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis pair is suited to custom car-audio installations where separate tweeters are being added to complement midrange speakers, coaxials, or a broader multi-speaker setup. The WZ25TW has a stated 3 kHz to 20 kHz frequency range, covering the upper part of the audible spectrum. Its 106 dB sensitivity rating indicates it is designed for efficient output when correctly integrated into a system.\u003c\/p\u003e\u003cp\u003eWarzone specifies up to 550 watts maximum power per tweeter, or 1100 watts total maximum power for the pair. Maximum power is not an RMS rating, so amplifier selection should be based on careful system matching rather than the maximum figure alone. Proper gain setting is important when adding high-sensitivity tweeters to an existing system.\u003c\/p\u003e\u003cp\u003eA titanium diaphragm is used for the sound-producing element, while the voice coil is specified as CCAW. This material combination is intended for a compact tweeter design focused on high-frequency reproduction. The compact magnet is listed at 0.98 inches by 0.28 inches.\u003c\/p\u003e\u003cp\u003eThe WZ25TW is a wired, car-mount tweeter pair that can be used as part of a vehicle audio upgrade. Its compact 2.93-inch format can suit installations with limited space, subject to confirming the available mounting location. For a balanced result, pair it with compatible speakers, amplification, and frequency filtering appropriate for a tweeter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.93-Inch Super Tweeters:\u003c\/strong\u003e Compact dedicated tweeters for high-frequency system support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches compatible 4-ohm car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Supports efficient output in a properly matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Uses a CCAW voice-coil construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Maximum Each:\u003c\/strong\u003e Rated at 1100W total maximum power per pair.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ25TW uses a compact 2.93-inch tweeter layout with a titanium diaphragm and CCAW voice coil. Its magnet dimensions are listed as 0.98 inches by 0.28 inches. The pair is designed for wired connection and car mounting.\u003c\/p\u003e\u003cp\u003eConfirm that the intended mounting location accommodates the tweeter and its mounting tabs before installation. Connect each tweeter only to a compatible 4-ohm audio channel or system configuration, and use appropriate high-frequency filtering for tweeter operation. Set amplifier gain conservatively and integrate the pair with the rest of the system to maintain balanced output.\u003c\/p\u003e","brand":"Warzone","offers":[{"title":"Default Title","offer_id":45668414652486,"sku":"WZ25TW","price":43.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71bJXBKTd9L.jpg?v=1784453140"}],"url":"https:\/\/audiowatt.store\/collections\/tweeters.oembed?page=3","provider":"Audio Watt Store","version":"1.0","type":"link"}