{"title":"Top Sellers","description":null,"products":[{"product_id":"jbl-club-a5055-5-channel-car-amplifier-with-bass-remote","title":"JBL Club A5055 5-Channel Car Amplifier with Bass Remote","description":"\u003cp\u003eThe JBL Club A5055 is a five-channel car amplifier designed to power a complete speaker-and-subwoofer upgrade from one compact chassis. It supplies dedicated amplification for front and rear speakers along with a separate subwoofer channel, helping replace the limited output of many factory or aftermarket radios. This layout is suited to drivers who want a more organized system without adding separate full-range and mono amplifiers.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the Club A5055 delivers 50 watts RMS to each of four full-range channels and 320 watts RMS to its subwoofer channel. At 2 ohms, the full-range channels are rated at 75 watts RMS each and the subwoofer channel at 500 watts RMS. It can also be configured in three-channel mode, with two bridged full-range channels and the subwoofer channel operating together.\u003c\/p\u003e\u003cp\u003eThe four main channels use Class AB amplification, while the subwoofer channel uses Class D amplification. This Class AB+D arrangement is designed to provide full-range speaker power and dedicated bass power within one amplifier. Balanced differential inputs are used to help reduce noise and distortion, including noise that can be introduced by a vehicle electrical system.\u003c\/p\u003e\u003cp\u003eSystem tuning is handled with selectable high-pass and low-pass filtering for the front and rear channels, plus a low-pass filter for the subwoofer channel. The subwoofer section also includes adjustable bass boost and a 0\/180-degree phase switch. These controls allow the amplifier to be matched more carefully to installed speakers, subwoofers, and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eThe Club A5055 accepts both low-level and speaker-level input signals, making it suitable for many aftermarket-radio and factory-radio installations. Its selectable DC or remote turn-on mode supports different signal and turn-on arrangements. A wired remote bass control module is included for convenient adjustment of subwoofer level from the driver's seat.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four full-range speakers and one subwoofer from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e780-Watt RMS Total:\u003c\/strong\u003e Combines full-range and subwoofer output in a single chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB+D Design:\u003c\/strong\u003e Uses Class AB full-range channels and a Class D subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Supports integration with aftermarket or factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Lets you tailor speaker and subwoofer frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Provides accessible subwoofer-level adjustment from the front seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club A5055 uses a low-profile chassis measuring 14-3\/16 inches wide, 2-1\/16 inches high, and 7-1\/8 inches deep. Its compact footprint is intended for installations where available mounting space is limited. An onboard LED indicates power or protection status, while protection circuitry addresses short circuits, high temperature, overvoltage, and undervoltage conditions.\u003c\/p\u003e\u003cp\u003eUse 4-gauge power and ground wiring as recommended by JBL, and select speakers and a subwoofer whose impedance and RMS power needs fit the amplifier's rated operating modes. The amplifier accepts RCA low-level inputs or speaker-level signals through the included bare-wire-to-RCA adapters; installation wiring and hardware are not included. Set crossover, gain, bass boost, and phase controls during system setup, and mount the included remote bass module where it can be reached safely.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632100302918,"sku":"AMPCBA5055AM","price":494.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51KaoyFys-L.jpg?v=1784394134"},{"product_id":"jbl-club-a600-mono-subwoofer-amplifier-with-remote-bass-control","title":"JBL Club A600 Mono Subwoofer Amplifier with Remote Bass Control","description":"\u003cp\u003eThe JBL Club A600 is a mono car amplifier designed to power a dedicated subwoofer system. It delivers 350 watts RMS at 4 ohms or 600 watts RMS at 2 ohms, providing a focused low-frequency upgrade for systems that need more bass output. Its compact, low-profile form helps make installation practical where vehicle space is limited.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to drivers building a subwoofer system around either an aftermarket receiver or a factory radio. It accepts both low-level preamp and speaker-level input signals, allowing it to work with a broad range of source units. Bare wire-to-RCA adapters are included for speaker-level signal connections.\u003c\/p\u003e\u003cp\u003eThe Club A600 uses Class D amplifier technology for high-output mono subwoofer amplification with efficient current use. Balanced Differential Inputs are designed to help reduce noise and distortion, including susceptibility to radiated engine noise. The result is a controlled bass foundation that can be tuned to complement the vehicle's full-range speakers.\u003c\/p\u003e\u003cp\u003eOnboard controls allow the amplifier to be adjusted for the subwoofer and enclosure being used. The variable low-pass filter operates from 32 to 320 Hz with a 12 dB-per-octave slope, while bass boost is adjustable from 0 to 12 dB at 45 Hz. A selectable 0- or 180-degree phase setting can help integrate bass response with the rest of the system.\u003c\/p\u003e\u003cp\u003eThe included wired remote bass control module gives the driver a convenient way to adjust bass level from the seat. Protection circuitry monitors for short circuits, high temperature, overvoltage, and undervoltage conditions, with an LED indicator for protection status. This makes the Club A600 a straightforward foundation for a single-subwoofer or properly impedance-matched multi-subwoofer installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS at 2 Ohms:\u003c\/strong\u003e Supplies substantial mono power for a compatible subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Design:\u003c\/strong\u003e Delivers efficient subwoofer amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Connects with factory or aftermarket car stereos.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Helps match bass output to the rest of the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Bass Control:\u003c\/strong\u003e Lets the driver adjust bass level conveniently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Monitors electrical and thermal fault conditions during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club A600 has a low-profile, compact chassis intended for installations with limited mounting space. Its control layout includes input-level adjustment, crossover frequency, bass boost, phase, and turn-on mode settings for system configuration. Integrated protection circuitry and a status LED provide operational monitoring for several common fault conditions.\u003c\/p\u003e\u003cp\u003eUse 8-gauge power and ground leads as recommended by JBL, and match the connected subwoofer load to the amplifier's rated 2- or 4-ohm power specifications. The amplifier includes two bare wire-to-RCA adapters for speaker-level integration, while power wiring and installation hardware for those connections are not included. Install the remote bass control using its included cable and mounting screws where it can be safely reached from the driver's seat.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632100335686,"sku":"AMPCBA600AM","price":387.34,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51ibw4PIjXL.jpg?v=1784394175"},{"product_id":"jbl-club-644f-4-x-6-two-way-car-speakers","title":"JBL Club 644F 4\" x 6\" Two-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 644F is a pair of 4\" x 6\" two-way car speakers designed to replace compatible factory-installed speakers. It provides a compact upgrade path for vehicles that use this common oval speaker size. With 92dB sensitivity, it is suited to systems powered by a factory radio as well as aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThese speakers handle 40 watts RMS and up to 120 watts peak per speaker. Their 75Hz–20kHz frequency response covers midrange and high-frequency reproduction while fitting the limited mounting space often found in factory locations. The 3-ohm nominal impedance is designed to draw more power from compatible car audio systems than a typical 4-ohm speaker.\u003c\/p\u003e\u003cp\u003eJBL's Plus One™ woofer cone architecture increases cone area within the speaker's size class. This design is intended to support higher sensitivity and greater low-frequency output than similarly sized conventional cones. The result is a responsive speaker intended for everyday music listening and direct factory-speaker replacement.\u003c\/p\u003e\u003cp\u003eThe woofer uses an acoustically damped, UV-resistant polypropylene cone for clean operation and durability in automotive environments. JBL also equips the Club 644F with a larger magnet structure to support its power-handling capacity. Its two-way configuration uses an integrated high-frequency driver to keep installation straightforward.\u003c\/p\u003e\u003cp\u003eThe Club 644F works well as a front- or rear-speaker upgrade where the vehicle accepts a 4\" x 6\" speaker. It can be used with a factory head unit or paired with an appropriately matched external amplifier. Confirm vehicle fitment, mounting depth, mounting-hole pattern, and wiring connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Two-Way Design:\u003c\/strong\u003e Fits compatible oval factory speaker locations while reproducing midrange and high-frequency information from one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Power Handling:\u003c\/strong\u003e Supports continuous power up to 40 watts per speaker for properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Helps compatible car audio systems deliver more power than with a conventional 4-ohm speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Cone Architecture:\u003c\/strong\u003e Uses increased cone area to support sensitivity and low-frequency output within the same speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Provides a damped cone material designed for heat and humidity found in vehicle interiors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92dB Sensitivity:\u003c\/strong\u003e Supports efficient output with factory radios and modestly powered aftermarket systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 644F uses a polypropylene woofer cone with acoustic damping and UV resistance for automotive use. Its Plus One™ cone design and larger magnet structure are engineered to support output and power handling in a compact 4\" x 6\" format. The speakers are finished in black and supplied as a pair.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle accepts 4\" x 6\" speakers and compare the available mounting space with the speaker's 157.0mm overall width, 99.5mm overall height, and 55.6mm depth. Use the included foam gasket as appropriate for the mounting surface, and verify polarity when connecting speaker wire. Vehicle-specific mounting adapters, wiring harnesses, or fasteners may be needed depending on the application.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632135823430,"sku":"JBLSPKCB644F","price":91.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61P_nFEtrnL.jpg?v=1784396595"},{"product_id":"jbl-club-64csq-6-5-component-speaker-system","title":"JBL Club 64CSQ 6.5\" Component Speaker System","description":"\u003cp\u003eThe JBL Club 64CSQ is a 6-1\/2-inch, two-way component speaker system designed for upgrading a vehicle's front-stage sound. It separates the woofer and tweeter so each can be placed where it works best in the vehicle. The system includes external crossovers to direct the appropriate frequencies to each driver.\u003c\/p\u003e\u003cp\u003eThis set is intended for listeners who want a more detailed and adjustable alternative to factory full-range door speakers. Its 95-watt RMS power rating supports use with compatible aftermarket amplification, while its 3-ohm nominal impedance and 93dB sensitivity make it suitable for many car-audio upgrade paths. The 48Hz-21kHz frequency response covers bass and midrange from the woofer along with high-frequency detail from the separate tweeters.\u003c\/p\u003e\u003cp\u003eThe woofer uses a carbon-fiber cone with JBL Plus One architecture. This design increases cone area relative to similarly sized speakers, helping the 6.5-inch woofer move air efficiently. The result is a focused foundation for vocals, instruments, and midbass in a properly installed vehicle system.\u003c\/p\u003e\u003cp\u003eFor the upper frequencies, the Club 64CSQ uses edge-driven silk-dome tweeters. The supplied crossovers use a 5kHz crossover point, and their tweeter output can be set to 0dB or +3dB. That adjustment can help tailor treble balance around the selected tweeter location.\u003c\/p\u003e\u003cp\u003eThe component format gives installers flexibility for door, dash, sail-panel, or A-pillar-oriented layouts where vehicle fitment allows. JBL includes multiple tweeter mounting pieces, including Starfish and I-Mount hardware, along with woofer grilles and adapter rings. It is a practical choice for a front-speaker upgrade paired with a compatible head unit or amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible driver placement than a coaxial speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Fiber Woofer:\u003c\/strong\u003e The woofer cone is designed for accurate, clear musical reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Architecture:\u003c\/strong\u003e Increased cone area helps the woofer deliver stronger low-frequency output for its size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk-Dome Tweeters:\u003c\/strong\u003e Separate silk-dome tweeters provide smooth high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Level:\u003c\/strong\u003e Select 0dB or +3dB output to better match the tweeter installation location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eY40 Ferrite Magnet:\u003c\/strong\u003e The woofer motor uses a Y40 ferrite magnet to support high sensitivity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 64CSQ combines carbon-fiber woofer cones, Y40 ferrite magnets, silk-dome tweeters, and separate passive crossovers. The set includes protective woofer grilles, multi-hole adapter rings, a foam gasket, and JBL logo badges. Its separate-driver design allows the tweeters and woofers to be positioned independently when the vehicle and installation plan permit.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific woofer opening, mounting depth, and wiring requirements before purchase. JBL lists a 158.2mm woofer outside diameter, 128.3mm cutout diameter, and 51.5mm mounting depth; the I-Mount tweeter hardware uses a 1-3\/4-inch cutout and 1-inch mounting depth. Use the included crossovers between the audio source or amplifier and the individual woofer and tweeter, and set the tweeter level to 0dB or +3dB as needed.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632136609862,"sku":"JBLSPKCB64CSQ","price":312.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/613BLGygoRL.jpg?v=1784396690"},{"product_id":"jbl-stage82am-8-200w-rms-car-subwoofer","title":"JBL STAGE82AM 8\" 200W RMS Car Subwoofer","description":"\u003cp\u003eThe JBL STAGE82AM is an 8-inch component car subwoofer designed to add low-frequency output to a compatible vehicle audio system. It is a passive driver, so it requires an external amplifier and a properly built sealed or ported enclosure. Its compact 8-inch format can suit systems where available enclosure space is limited.\u003c\/p\u003e\u003cp\u003eWith 200 watts RMS and 800 watts peak power handling, the Stage 82 is intended for use with an amplifier matched to its 4-ohm nominal impedance. Its 88 dB sensitivity and 38 Hz to 200 Hz frequency-response rating support bass reinforcement across the low-frequency range. Use an amplifier low-pass crossover to keep higher frequencies out of the subwoofer.\u003c\/p\u003e\u003cp\u003eThe driver uses a polypropylene cone with a high-roll rubber surround. This material combination is designed to provide a rigid cone surface with a durable, flexible suspension for repeated movement. A 1.5-inch voice coil supports the subwoofer's power-handling capability.\u003c\/p\u003e\u003cp\u003eThe Stage 82 has a single 4-ohm voice coil and conventional wired speaker terminals. JBL specifies a 7-1\/16-inch mounting cutout, 3-3\/4-inch mounting depth, and 8-1\/8-inch outer diameter. Check enclosure clearance, mounting-hole placement, and available depth before installation.\u003c\/p\u003e\u003cp\u003eFor a complete bass upgrade, pair the Stage 82 with a suitable mono or bridged amplifier, an enclosure, speaker wire, and the required vehicle power and signal wiring. JBL provides sealed and vented enclosure recommendations for this driver, allowing system builders to choose a compact sealed alignment or a tuned ported design. A foam mounting gasket is included to help seal the driver to its enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Subwoofer:\u003c\/strong\u003e Compact component driver for a dedicated bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Handling:\u003c\/strong\u003e Supports amplifier power matched to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm-stable amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a lightweight, rigid diaphragm for bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Supports cone movement with durable suspension material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5-Inch Voice Coil:\u003c\/strong\u003e Supports the driver’s rated power-handling design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage 82 uses a polypropylene cone, high-roll rubber surround, and a 1.5-inch voice coil in a round 8-inch driver format. Its outer diameter is 8-1\/8 inches, with a mounting height of 7\/16 inch above the mounting surface. The included foam gasket helps create a seal between the driver frame and enclosure.\u003c\/p\u003e\u003cp\u003eInstall this subwoofer in a sealed or ported enclosure sized for the driver, using a 7-1\/16-inch cutout and at least 3-3\/4 inches of mounting depth. Connect it to an external amplifier that is appropriate for a 4-ohm, 200-watt RMS subwoofer, observing terminal polarity. JBL recommends 14 AWG to 8 AWG speaker wire depending on run length, with heavier wire preferred for runs over 6 feet.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632466354246,"sku":"STAGE82AM","price":102.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51o2aUmyDbL.jpg?v=1784400355"},{"product_id":"pioneer-gm-dx874-4-channel-class-d-car-amplifier","title":"Pioneer GM-DX874 4-Channel Class-D Car Amplifier","description":"\u003cp\u003eThe Pioneer GM-DX874 is a bridgeable four-channel car amplifier designed to add clean, configurable power to an upgraded vehicle audio system. It can drive front and rear speakers independently, or be configured for two- or three-channel applications including a bridged subwoofer channel. This makes it a practical choice for listeners building a full-range system now or planning a staged upgrade.\u003c\/p\u003e\u003cp\u003eIts continuous output is rated at 100 watts RMS per channel at 4 ohms, 150 watts RMS per channel at 2 ohms, and 300 watts RMS per bridged pair at 4 ohms. The wide 10 Hz to 50 kHz frequency response supports full-range speaker systems and high-resolution playback-capable sources. Class-D operation helps deliver this power from a compact chassis that is easier to place than many conventional amplifiers.\u003c\/p\u003e\u003cp\u003eSeparate variable high-pass and low-pass filtering lets the GM-DX874 be matched to speakers or subwoofers. Both crossover ranges adjust from 40 Hz to 500 Hz with a 12 dB\/octave slope. This helps remove unnecessary low bass from smaller speakers or limit a subwoofer channel to low-frequency content.\u003c\/p\u003e\u003cp\u003eThe amplifier accepts RCA-level and speaker-level signals, allowing it to work with many aftermarket receivers as well as compatible factory-radio systems. Automatic signal sensing can turn the amplifier on when it detects a speaker-level input signal, though a system remote wire may be needed with some head units. A two-channel\/four-channel input selector provides additional flexibility when planning system wiring.\u003c\/p\u003e\u003cp\u003eFor bass-focused channel B setups, the included wired bass boost remote adjusts 50 Hz boost from 0 dB to 18 dB. Gold-plated RCA connections, audio film capacitors, and a low-impedance output-filter coil support the amplifier's signal path. Built-in protection monitors abnormal conditions and can mute or shut down output if overheating, DC output, or a speaker-wire short is detected.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class-D Amplification:\u003c\/strong\u003e Powers four speakers or supports bridged system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Per Channel:\u003c\/strong\u003e Delivers rated continuous power at 4-ohm stereo loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable HPF And LPF:\u003c\/strong\u003e Adjusts crossover points from 40 Hz to 500 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution Frequency Range:\u003c\/strong\u003e Extends from 10 Hz to 50 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Connects to compatible factory-radio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Boost Remote:\u003c\/strong\u003e Adjusts channel B bass boost from 0 dB to 18 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GM-DX874 uses a compact 252 mm × 60 mm × 215 mm chassis and weighs 2.5 kg without wiring leads. Its connection layout includes RCA inputs for channels A and B, an RCA pass-through output from channel A, block-style power and speaker terminals, and a POWER\/PROTECT indicator. The amplifier incorporates gold-plated RCA connections and a protection system for temperature, DC-output, and short-circuit conditions.\u003c\/p\u003e\u003cp\u003eInstall it in a rigid, well-ventilated location with clearance above the chassis; do not cover it with carpet or a floor mat. The amplifier is intended for 12 V negative-ground vehicles and requires separately sold battery, ground, signal, and fuse components; Pioneer specifies an 80 A external battery-line fuse within 30 cm of the positive battery terminal. Use 8 AWG to 16 AWG speaker wire, match speaker impedance to the selected configuration, and set gain and crossover controls after wiring is complete.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633217888326,"sku":"GM-DX874","price":376.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61nQcSz1iqL.jpg?v=1784418239"},{"product_id":"pioneer-gm-dx975-5-channel-class-d-car-amplifier","title":"Pioneer GM-DX975 5-Channel Class-D Car Amplifier","description":"\u003cp\u003eThe Pioneer GM-DX975 is a five-channel Class-D car amplifier designed to power front speakers, rear speakers, and a subwoofer from one compact chassis. It is suited to drivers building a complete amplified audio system without adding separate full-range and mono amplifiers. Its five-channel layout provides dedicated amplification for a four-speaker system plus bass reinforcement.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the GM-DX975 delivers 75 watts RMS to each of four full-range channels and 350 watts RMS to its subwoofer channel. The subwoofer channel can provide up to 600 watts RMS at 2 ohms, while the full-range channels can be bridged for a three-channel configuration. This flexibility supports conventional front-and-rear speaker systems as well as systems focused on amplified front components and a subwoofer.\u003c\/p\u003e\u003cp\u003eClass-D amplification helps deliver substantial output in a compact format suited to space-conscious vehicle installations. The full-range channels extend to 50 kHz and the amplifier is Hi-Res Audio Certified, making it appropriate for systems intended to preserve extended high-frequency playback. Gold-plated RCA terminals and high-grade electronic components support dependable signal connections within a properly installed system.\u003c\/p\u003e\u003cp\u003eBuilt-in crossover controls allow the system to be tailored to the speakers and subwoofer being used. The A\/B channels offer selectable high-pass or low-pass filtering from 40 Hz to 500 Hz, while the subwoofer channel includes an adjustable low-pass filter in the same range. A selectable subwoofer low-pass slope and bass boost control add further tuning options for bass integration.\u003c\/p\u003e\u003cp\u003eThe GM-DX975 can accept RCA-level signals or speaker-level signals from a compatible factory or aftermarket stereo. Its speaker-level input can automatically turn the amplifier on when it detects a head-unit speaker signal, though this function may not work with every head unit. A wired bass boost remote is included for convenient adjustment of subwoofer bass boost from the listening position.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four full-range speaker channels and one dedicated subwoofer channel from a single amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Amplification:\u003c\/strong\u003e Provides efficient amplified power in a compact chassis for vehicle audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certified:\u003c\/strong\u003e Full-range response extends to 50 kHz for compatible high-resolution audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Power Configuration:\u003c\/strong\u003e Supports five-channel operation or three-channel operation with bridged full-range channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Adjustable high-pass and low-pass filters help match output to speakers and subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Lets the listener adjust subwoofer bass boost from an accessible mounted location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GM-DX975 uses a compact 302 mm-wide chassis with high-grade electronic components and gold-plated RCA terminals. Its layout includes gain controls, filter controls, input-selection switches, power\/protection indication, speaker-level input, and a connection for the wired bass boost remote. The protection system monitors abnormal conditions including output shorts, DC voltage at the speaker output, and excessive internal temperature.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a rigid surface with adequate ventilation above the chassis, and do not cover it with carpet or a floor mat. It requires a 12-volt negative-ground vehicle electrical system, with separately sold battery and ground wiring sized for the installation length; speaker and subwoofer wire should be 12 to 16 AWG. Use RCA inputs with an aftermarket receiver or the supplied-style speaker-input connection method with compatible factory speaker outputs, but do not connect both input types at the same time.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633218117702,"sku":"GM-DX975","price":612.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61nNIJ0ctFL.jpg?v=1784418341"},{"product_id":"rockford-fosgate-p2d2-10-10-dual-2-ohm-subwoofer","title":"Rockford Fosgate P2D2-10 10\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P2D2-10 is a 10-inch dual voice coil car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. Its dual 2-ohm voice coils give installers flexibility when planning the final amplifier load. It is intended for use with an external subwoofer amplifier and a properly built enclosure.\u003c\/p\u003e\u003cp\u003eThis model suits listeners who want a compact 10-inch woofer for a trunk, hatchback, SUV, or custom vehicle enclosure. With a 300-watt RMS power rating, it is sized for moderate-power bass systems rather than a high-power competition build. The P2D2-10 can be used in either sealed or vented box designs depending on available space and system goals.\u003c\/p\u003e\u003cp\u003eThe Kevlar fiber reinforced paper cone is paired with a rubber surround and a dual linear spider assembly. This combination is designed to support controlled cone movement while handling sustained bass playback. Its 84 dB sensitivity rating and 29-250 Hz frequency-response specification place it squarely in the sub-bass and bass range.\u003c\/p\u003e\u003cp\u003eRockford Fosgate equips the P2D2-10 with a high-temperature, four-layer voice coil, a spun-laced Nomex reinforcement collar, and integrated spider venting in the StampCast basket. The extended pole piece and bumped vented backplate provide clearance and ventilation around the motor structure. Dual 10-AWG nickel-plated compression terminals provide substantial speaker-wire connection points.\u003c\/p\u003e\u003cp\u003eFor a balanced upgrade path, pair this subwoofer with an amplifier selected for its final wired impedance and approximately its 300-watt RMS rating. A sealed enclosure uses less volume and follows the published 0.50-0.85 cubic-foot range, while the recommended vented design uses 1.40 cubic feet gross internal volume. The included decorative trim ring provides a finished appearance, and an optional grille insert can be added for cone protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching around 300 watts of continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility when configuring an amplifier load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar-Reinforced Paper Cone:\u003c\/strong\u003e Combines a paper-cone character with added fiber reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStampCast Vented Basket:\u003c\/strong\u003e Integrates spider venting to help manage voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVAST Cone Design:\u003c\/strong\u003e Increases effective cone area compared with conventional mounting designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-AWG Compression Terminals:\u003c\/strong\u003e Accommodates larger speaker wire for secure connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2D2-10 uses a Kevlar fiber reinforced paper cone, protective textured PVC magnet cover, dual linear spiders, and embedded 16-AWG tinsel leads. Its high-temperature voice coil uses a spun-laced Nomex reinforcement collar, while the extended pole piece and bumped vented backplate support the motor assembly. A diamond-cut cast aluminum trim ring is included, with an optional grille insert available separately.\u003c\/p\u003e\u003cp\u003eConfirm a 9.13-inch cutout and at least 5.92 inches of mounting depth before installation. Use a sealed enclosure between 0.50 and 0.85 cubic feet, or follow the published 1.40-cubic-foot vented enclosure design with a 4-inch by 14-inch port. Match the amplifier to the final impedance created by the dual 2-ohm coils, and set gain carefully to avoid overpowering the 300-watt RMS-rated woofer.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634276655174,"sku":"P2-D2-10","price":179.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61l2a1xUQmL.jpg?v=1784429313"},{"product_id":"rockford-fosgate-p3d4-12-12-dual-4-ohm-subwoofer","title":"Rockford Fosgate P3D4-12 12\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3D4-12 is a 12-inch dual 4-ohm voice coil subwoofer designed to add controlled low-frequency output to a car audio system. Its dual-coil configuration provides wiring flexibility for matching a compatible mono or multi-channel amplifier. It is suited to listeners building a dedicated bass system or upgrading an existing subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eWith a 600-watt RMS power rating and 1,200-watt maximum rating, this subwoofer is intended for amplified installations rather than direct connection to a factory radio. Its stated frequency response reaches from 28 Hz to 250 Hz for bass-focused playback. The 85 dB sensitivity specification and 12-inch cone make it appropriate for systems designed around solid, sustained low-end output.\u003c\/p\u003e\u003cp\u003eThe P3D4-12 uses an anodized aluminum cone and dustcap with a Santoprene rubber surround. This combination is built to support cone control and durability during high-excursion bass reproduction. A 2.5-inch, four-layer high-temperature voice coil is reinforced with a spun-laced Nomex collar.\u003c\/p\u003e\u003cp\u003eRockford Fosgate incorporates a StampCast hybrid basket, integrated spider venting, and an extended pole piece with a bumped vented backplate. These design elements are intended to support structural rigidity and motor cooling. The VAST surround design increases effective cone area compared with a conventional surround attachment.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in sealed or vented enclosures depending on the desired system response and available vehicle space. A sealed box offers a compact installation path, while the recommended vented design is tuned for stronger output around its port tuning frequency. Its dual 4-ohm coils can be wired in series or parallel to create an 8-ohm or 2-ohm nominal load for a compatible amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm or 8-ohm wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Cone:\u003c\/strong\u003e Provides a rigid diaphragm for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStampCast Hybrid Basket:\u003c\/strong\u003e Combines strength with reduced resonance and weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpider Venting:\u003c\/strong\u003e Helps move air around the motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-AWG Push Terminals:\u003c\/strong\u003e Accommodate substantial speaker wire for secure connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3D4-12 uses an anodized aluminum cone and dustcap, Santoprene surround, dual linear spiders, and a protective PVC-textured magnet cover. Its high-temperature, four-layer voice coil uses a spun-laced Nomex reinforcement collar, while the basket integrates venting around the spider area. A diamond-cut cast-aluminum trim ring is included, and the design accepts an optional grille.\u003c\/p\u003e\u003cp\u003eAllow for an 11.25-inch cutout and 6.66-inch mounting depth, plus sufficient clearance behind the motor and terminals. Rockford Fosgate specifies a 0.75 to 1.25 cubic-foot sealed enclosure range or a 1.79 cubic-foot optimum vented enclosure; enclosure volume should account for driver and port displacement. Use an amplifier and wiring configuration compatible with the final 2-ohm or 8-ohm nominal load, and use a subsonic filter with a vented enclosure.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634341273670,"sku":"P3-D4-12","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61K01-QkdML_ea2f0239-eeb3-40d6-b378-930b5bfda0fb.jpg?v=1784430736"},{"product_id":"rockford-fosgate-p3sd4-12-12-shallow-dvc-subwoofer","title":"Rockford Fosgate P3SD4-12 12\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3SD4-12 is a 12-inch shallow-mount car subwoofer designed to add substantial low-frequency output where conventional deep subwoofers will not fit. Its low-profile mounting depth helps make bass upgrades practical in trucks, compact vehicles, and custom enclosures with limited behind-panel space. Dual 4-ohm voice coils provide wiring flexibility for matching a compatible mono or multi-channel amplifier.\u003c\/p\u003e\u003cp\u003eRated for 400 watts RMS and 800 watts maximum power, this Punch P3S model is intended for systems that need controlled, full-bodied bass without requiring an oversized enclosure. Its 34-250 Hz frequency response supports the low bass and upper-bass range typically handed off by a subwoofer crossover. The 85 dB sensitivity specification and 12-inch cone area make it suitable for a properly matched amplified system.\u003c\/p\u003e\u003cp\u003eThe P3SD4-12 uses an anodized aluminum cone and aluminum dustcap to provide a rigid moving surface, while the M-Roll Santoprene surround supports cone movement. A dual linear spider and aluminum voice-coil former are part of the motor and suspension assembly. These components are designed to support stable operation in a compact shallow-mount format.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a StampCast basket with integrated spider venting to help manage airflow around the motor structure. The shallow motor assembly preserves installation clearance while maintaining a 2.5-inch, 4-layer voice coil. Custom 10-AWG nickel-plated push terminals simplify connection of appropriately sized speaker wire.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in either a sealed or vented enclosure, letting the installer choose between compact sealed-box behavior or the increased output available from a properly tuned ported design. A 1.00 cubic-foot sealed enclosure is the published recommendation, while the recommended vented enclosure volume is 1.25 cubic feet. Pair it with an amplifier and enclosure designed around its final wired impedance and 400-watt RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount 12-Inch Design:\u003c\/strong\u003e Fits systems where mounting depth is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports 2-ohm or 8-ohm single-sub wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400-Watt RMS Rating:\u003c\/strong\u003e Matches appropriately sized subwoofer amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Cone:\u003c\/strong\u003e Provides a rigid, lightweight cone surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Spider Venting:\u003c\/strong\u003e Helps move air around the motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatible:\u003c\/strong\u003e Allows enclosure tuning for installation goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3SD4-12 combines an anodized aluminum cone and dustcap, M-Roll Santoprene surround, dual linear spider, and aluminum voice-coil former. Its StampCast basket is built with integrated spider venting, and the subwoofer includes a diamond-cut cast-aluminum trim ring. The assembly is engineered around a shallow 3.65-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the enclosure has at least an 11.22-inch cutout and sufficient mounting clearance before installation. For a sealed build, use the published 1.00 cubic-foot recommendation or the 0.60-1.20 cubic-foot recommended range; for a vented build, use the 1.25 cubic-foot recommendation with the specified port configuration. Set amplifier gain conservatively, use a low-pass crossover, and use a subsonic filter with a vented enclosure.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634546008134,"sku":"P3SD412","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71WqQ_PeMjL_74e6d282-59ae-4903-9c6e-c62c6ae85866.jpg?v=1784431794"},{"product_id":"rockford-fosgate-r2-500x1-500w-class-d-mono-amplifier","title":"Rockford Fosgate R2-500X1 500W Class-D Mono Amplifier","description":"\u003cp\u003eThe Rockford Fosgate R2-500X1 is a mono car amplifier designed to power a subwoofer system with controlled, adjustable bass output. It delivers 300 watts RMS at 4 ohms or 500 watts RMS at 2 ohms, making it suitable for a variety of subwoofer wiring configurations. Its compact chassis helps add dedicated bass amplification without requiring a large mounting area.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building or upgrading a vehicle subwoofer system, including systems retaining a factory radio. High-level input capability allows connection to compatible factory speaker wiring, while RCA inputs support aftermarket source units. A selectable auto turn-on feature can use DC-offset signal sensing when high-level inputs are used.\u003c\/p\u003e\u003cp\u003eIts full-range Class-D design is engineered for efficient operation from a vehicle's 12-volt electrical system. The mono output is fixed low-pass for subwoofer use, with a variable low-pass crossover to help blend the subwoofer with the rest of the system. A variable infrasonic filter can reduce very low frequencies sent to the subwoofer, particularly useful with vented enclosures.\u003c\/p\u003e\u003cp\u003eRockford Fosgate C.L.E.A.N. input and output indicators assist with gain setup by showing when input or amplifier output distortion begins. This provides a practical reference for setting source-unit volume and amplifier gain. The variable Punch EQ adds selectable bass boost at 45 Hz, so it should be adjusted carefully after basic gain setup.\u003c\/p\u003e\u003cp\u003eThe R2-500X1 can serve as the bass amplifier in a factory-radio upgrade or an aftermarket multi-amplifier system. Its RCA pass-through connections can simplify routing signal to another compatible amplifier. A wired remote level control is included for adjusting subwoofer output from the front of the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Mono Output:\u003c\/strong\u003e Delivers up to 500 watts RMS into a 2-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Amplification:\u003c\/strong\u003e Provides efficient mono amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup Indicators:\u003c\/strong\u003e Helps identify clipping during source and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the subwoofer crossover point from 50 to 250 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Infrasonic Filter:\u003c\/strong\u003e Filters frequencies from 15 to 40 Hz below the selected point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer output level remotely.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier uses a cast-aluminum heat sink with a top-mounted control panel for access after installation. Nickel-plated set-screw terminals are used for power, ground, remote, and speaker connections. Blue and red status indicators identify power operation and protection or thermal conditions.\u003c\/p\u003e\u003cp\u003eInstall the amplifier where its heat sink has at least 1 inch of surrounding air space, and mount it away from moisture and excessive heat. Use either the RCA low-level inputs or the high-level input harness, never both at once. The manufacturer specifies an 80-amp battery fuse, installed within 18 inches of the battery, and recommends keeping the chassis ground connection under 30 inches.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45641030041670,"sku":"R2-500X1","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71wEmwmhJnL.jpg?v=1784435303"},{"product_id":"rockford-fosgate-r2-750x5-prime-5-channel-amplifier","title":"Rockford Fosgate R2-750X5 Prime 5-Channel Amplifier","description":"\u003cp\u003eThe Rockford Fosgate R2-750X5 is a five-channel car audio amplifier designed to power front and rear speakers plus a subwoofer from one chassis. It provides separate full-range and subwoofer amplification for a more complete system upgrade than a single mono or four-channel amplifier. Its compact 1.9-inch-tall design helps it fit in many vehicle installations where space is limited.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to drivers building or updating a system with four cabin speakers and one passive subwoofer. The four full-range channels can run stereo speakers at 4 or 2 ohms, while the dedicated subwoofer channel supports a 4- or 2-ohm load. The front and rear channels can also be configured as two bridged pairs at 4 ohms when the system calls for more power to compatible speakers.\u003c\/p\u003e\u003cp\u003eRated output is 50 watts RMS per full-range channel plus 200 watts RMS for the subwoofer channel at 4 ohms. At 2 ohms, it delivers 100 watts RMS per full-range channel and 350 watts RMS to the subwoofer channel. Independent front, rear, and sub input-gain controls and adjustable crossover sections allow the amplifier to be matched to a wide variety of speaker and subwoofer combinations.\u003c\/p\u003e\u003cp\u003eThe R2-750X5 uses full-range Class-D circuitry to reduce electrical-system demand compared with less-efficient amplifier designs. Rockford Fosgate C.L.E.A.N. setup circuitry uses clip indicators to assist with gain adjustment, while the P.O.W.E.R. supply is designed to increase dynamic output as vehicle voltage rises. A variable Punch EQ on the subwoofer section and a variable infrasonic filter provide additional low-frequency tuning options.\u003c\/p\u003e\u003cp\u003eFor system integration, the amplifier accepts low-level RCA signals or high-level speaker signals through dedicated front, rear, and subwoofer inputs. Its 2\/4\/5-channel input selector supports source units with different numbers of audio outputs, including many factory-radio upgrade paths. An included RLC remote level control gives the installer a convenient way to adjust the subwoofer level from the cabin.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four speakers and one subwoofer from a single amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750-Watt Rated Power:\u003c\/strong\u003e Supplies dedicated RMS power across full-range and subwoofer channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Range Class-D:\u003c\/strong\u003e Provides efficient amplification for speakers and bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup:\u003c\/strong\u003e Clip indicators assist with setting amplifier gain appropriately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\/4\/5 Input Selector:\u003c\/strong\u003e Adapts to head units with different channel-output configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded RLC Remote:\u003c\/strong\u003e Enables convenient adjustment of subwoofer output level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2-750X5 uses a cast-aluminum heatsink and convection cooling to manage operating heat. Its top-mounted control panel keeps gain, crossover, and tuning adjustments accessible after installation. Blue and red status indicators identify power, protection, input clipping, and output clipping conditions for the front, rear, and subwoofer sections.\u003c\/p\u003e\u003cp\u003eUse 4 AWG power wiring and a properly installed 120 A fuse, which is recommended but not included. Match the full-range channels to 4- or 2-ohm stereo speaker loads, or use 4-ohm loads for bridged front or rear channel pairs; connect the dedicated subwoofer channel to a 4- or 2-ohm subwoofer load. Configure the input selector, gain controls, crossovers, and subwoofer filter during installation to suit the source unit and connected speakers.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45641878077510,"sku":"R2-750X5","price":539.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71n748CxJZL_c1ca6bd1-34a0-4d1f-8879-9ace1b3708ef.jpg?v=1784435743"},{"product_id":"shure-mv7-k-dynamic-usb-c-xlr-podcast-microphone","title":"Shure MV7+K Dynamic USB-C\/XLR Podcast Microphone","description":"\u003cp\u003eThe Shure MV7+K is a dynamic podcast microphone designed for spoken-word recording, livestreaming, broadcasting, gaming, and vocal content creation. Its cardioid pickup pattern focuses on sound directly in front of the microphone, helping reduce pickup of unwanted room sound from the sides and rear. It is suited to creators who need a close-address microphone with both direct USB-C convenience and conventional XLR connectivity.\u003c\/p\u003e\u003cp\u003eUsing USB-C, the MV7+K connects directly to compatible computers, phones, and tablets while providing digital audio and onboard processing controls. Its USB output supports real-time headphone monitoring through the built-in 3.5 mm output, making it practical for checking mic level and computer playback during a session. The passive XLR output also allows connection to a mixer or audio interface.\u003c\/p\u003e\u003cp\u003eThe microphone uses a moving-coil dynamic transducer with a 50 Hz to 16 kHz frequency response and a unidirectional cardioid pattern. This close-mic design is intended to maintain vocal intelligibility with a balanced tone. Voice Isolation Technology combines the directional capsule with DSP to help emphasize the speaker over nearby background sound.\u003c\/p\u003e\u003cp\u003eShure's onboard DSP provides Auto Level Mode, real-time denoising, a Digital Popper Stopper, adjustable tone, reverb, compression, limiting, and high-pass filtering. These controls are available through MOTIV Mix for desktop and Shure MOTIV Audio and Video apps for mobile use. The microphone retains the most recently used settings for faster repeat setup.\u003c\/p\u003e\u003cp\u003eA full-color LED touch panel adds live level metering, customizable lighting behavior, brightness control, and tap-to-mute operation. The MV7+K can be mounted on a standard microphone stand or boom using its adjustable yoke and 5\/8-inch-27 threaded mount. For a system upgrade path, use USB-C for a compact plug-and-play setup or XLR with an external interface or mixer when adding outboard recording equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid USB-C\/XLR Outputs:\u003c\/strong\u003e Connect directly to a computer or mobile device, or use an XLR mixer or audio interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Dynamic Capsule:\u003c\/strong\u003e Focuses on the speaker in front of the microphone for close-mic vocal capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Isolation Technology:\u003c\/strong\u003e Combines directional pickup and DSP to help reduce unwanted background sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard DSP Suite:\u003c\/strong\u003e Includes Auto Level, denoising, pop filtering, tone control, reverb, compression, limiting, and high-pass filtering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Touch Panel:\u003c\/strong\u003e Provides tap-to-mute control, level display, and configurable color and brightness behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Monitoring:\u003c\/strong\u003e The 3.5 mm output supports direct, latency-free monitoring with compatible headphones or earphones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MV7+K uses a diecast aluminum housing with an adjustable yoke assembly and black foam windscreen. Its all-metal construction is designed for regular desktop, boom-arm, and studio use. The LED touch panel runs along the body for visible status, level monitoring, and mute control.\u003c\/p\u003e\u003cp\u003eFor USB operation, connect the included 3 m USB-C to USB-C cable to a compatible computer, phone, or tablet, then connect headphones to the 3.5 mm monitor output if desired. For analog operation, connect its passive XLR output to a mixer or audio interface; Shure notes that XLR audio is not affected by software settings. Mount the microphone to a 5\/8-inch-27 stand or boom thread, or use the included 5\/8-inch-to-3\/8-inch adapter where needed.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45668961714246,"sku":"MV7+K","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81SkpwyPZnL.jpg?v=1784474774"},{"product_id":"shure-sm57-lc-dynamic-cardioid-instrument-microphone","title":"Shure SM57-LC Dynamic Cardioid Instrument Microphone","description":"\u003cp\u003eThe Shure SM57-LC is a wired dynamic instrument microphone designed for close-miking amplified instruments, drums, percussion, and selected vocal applications. Its cardioid pickup pattern helps concentrate capture on the intended source while reducing pickup from the rear and surrounding stage or studio noise. It is a practical choice when a dependable XLR microphone is needed for live sound reinforcement or recording.\u003c\/p\u003e\u003cp\u003eThis microphone is well suited to guitar and bass cabinets, snare drums, toms, brass, woodwinds, and acoustic instruments. Its contoured frequency response includes a presence rise intended to support attack and detail from instrument sources. The result is a focused, direct sound character that can help instruments remain defined in a mix.\u003c\/p\u003e\u003cp\u003eThe SM57-LC uses a moving-coil dynamic element, so it does not require phantom power for operation. Its 40 Hz to 15 kHz frequency response covers the core range of many amplified and acoustic instrument sources. The cardioid pattern also supports close placement, helping reduce unwanted bleed in multi-microphone setups.\u003c\/p\u003e\u003cp\u003eShure equips the SM57 design with a pneumatic shock-mount system to help reduce handling noise and mechanical vibration. The housing uses enamel-painted die-cast steel with a polycarbonate grille and stainless steel screen. This construction is intended for regular transport, stage use, and studio sessions.\u003c\/p\u003e\u003cp\u003eFor use in a recording or live-sound system, connect the microphone's male XLR output to a mixer, audio interface, microphone preamp, or other compatible XLR microphone input. The SM57-LC package includes a swivel stand adapter and storage bag, while an XLR cable is required separately. Placement can be adjusted around a speaker cone or drum head to tailor attack, bass response, and overall balance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Moving-Coil Element:\u003c\/strong\u003e Operates without phantom power and is suited to instrument and vocal capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Polar Pattern:\u003c\/strong\u003e Focuses on the source in front while reducing rear pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContoured Frequency Response:\u003c\/strong\u003e Adds presence for defined attack and instrumental detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePneumatic Shock Mount:\u003c\/strong\u003e Helps reduce handling noise and mechanical vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale XLR Output:\u003c\/strong\u003e Connects to compatible professional microphone inputs with an XLR cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Stand Adapter:\u003c\/strong\u003e Provides a practical mounting option for microphone stands.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM57-LC has a dark gray, enamel-painted die-cast steel housing with a polycarbonate grille and stainless steel screen. Its compact body measures 157 mm long, with a maximum width of 32 mm. The microphone weighs 0.284 kg and uses a three-pin male XLR connector.\u003c\/p\u003e\u003cp\u003eMount the microphone with the included A25D swivel stand adapter and connect it using a compatible XLR microphone cable, which is not included with the SM57-LC. For guitar or bass cabinets, placement close to the cone emphasizes attack; moving farther back can produce a more balanced capture. For drums and percussion, aim the microphone toward the desired striking surface while keeping unwanted sound sources behind the microphone.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45669113888838,"sku":"SM57-LC","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51oELchNdFL.jpg?v=1784478434"},{"product_id":"presonus-audiobox-usb-96-complete-recording-bundle","title":"PreSonus AudioBox USB 96 Complete Recording Bundle","description":"\u003cp\u003eThe PreSonus AudioBox USB 96 Complete Bundle is an all-in-one desktop recording package built around a 2-input, 2-output USB audio interface. It brings together an interface, compact powered studio monitors, a condenser microphone, monitoring headphones, cables, and recording software access. It is designed to give musicians, podcasters, vocalists, and beginning producers a coordinated starting point for recording at home.\u003c\/p\u003e\u003cp\u003eAt the center of the package, the AudioBox USB 96 captures and plays back audio at up to 24-bit\/96 kHz resolution. Its two front-panel XLR\/1\/4-inch combo inputs accept microphones, guitars, basses, and line-level sources. A front-panel Mix control blends direct input sound with computer playback for latency-free hardware monitoring while recording.\u003c\/p\u003e\u003cp\u003eThe included M7 MKII is a cardioid back-electret condenser microphone intended for close vocal and instrument capture. Its directional cardioid pattern helps focus on the sound source in front of the microphone. The included HD7 headphones use 50 mm neodymium drivers and a semi-open acoustic design for detailed monitoring during tracking and mix review.\u003c\/p\u003e\u003cp\u003eA pair of Eris 3.5 powered monitors provides nearfield playback for editing, arranging, and general listening. Each speaker uses a 3.5-inch woven glass-fiber composite low-frequency driver and a 1-inch silk-dome tweeter. High- and low-frequency controls allow the monitor response to be adjusted for placement and room conditions.\u003c\/p\u003e\u003cp\u003eThis bundle can serve as a first complete recording workspace or as a portable front end for a larger computer-based setup. The AudioBox provides balanced main outputs for monitor upgrades, MIDI input and output for compatible hardware, and a dedicated headphone output. The included perpetual Studio One Pro license provides a recording and production platform for building projects around the supplied hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2x2 USB Audio Interface:\u003c\/strong\u003e Records and plays back up to two channels at 24-bit\/96 kHz resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Combo Inputs:\u003c\/strong\u003e Connect microphones, instruments, and line-level sources through two front-panel inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Monitoring Control:\u003c\/strong\u003e Blends live input with computer playback without software-monitoring latency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM7 MKII Condenser Microphone:\u003c\/strong\u003e Cardioid microphone supports vocal and instrument recording with phantom power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEris 3.5 Powered Monitors:\u003c\/strong\u003e Compact 50-watt Class AB monitor pair includes acoustic-tuning controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio One Pro License:\u003c\/strong\u003e Includes a perpetual license for computer-based recording and production.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AudioBox USB 96 uses a compact black chassis designed for desktop and mobile recording use. The Eris 3.5 monitors use vinyl-laminated medium-density fiberboard cabinets, while the HD7 headphones use lightweight construction with long-lasting ear pads. The bundle combines dedicated recording, monitoring, and playback components rather than relying on a computer's built-in audio hardware.\u003c\/p\u003e\u003cp\u003eConnect the AudioBox to a computer through USB 2.0, then connect the M7 MKII to either combo input with its XLR cable and enable +48V phantom power when needed. Connect powered monitors to the balanced left and right main outputs using appropriate 1\/4-inch TRS cables, or use the HD7 headphones from the interface's 1\/4-inch headphone output. Position the Eris monitors at ear level in a nearfield listening arrangement, and use their high- and low-frequency controls to suit the room and speaker placement.\u003c\/p\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":45669122900038,"sku":"AUDIOBOX 25TH STUDIO HARDWARE","price":314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71gVkzwmZ4L.jpg?v=1784479205"},{"product_id":"presonus-eris-3-5-wh-3-5-powered-studio-monitor-pair","title":"PreSonus ERIS-3.5-WH 3.5\" Powered Studio Monitor Pair","description":"\u003cp\u003eThe PreSonus Eris 3.5 is a compact pair of powered 3.5-inch media reference monitors designed for close-range listening at a desk, workstation, or small studio. One cabinet contains the amplification and connections, while the second cabinet is powered from it with the included speaker wire. This arrangement provides a practical monitoring solution without requiring a separate stereo amplifier or receiver.\u003c\/p\u003e\u003cp\u003eThese monitors are well suited to music production, editing, gaming, content creation, and everyday computer audio where clearer stereo presentation is useful. Their 80 Hz to 20 kHz frequency response and 2-way active design help present a broad range of program material in a compact footprint. The front-panel volume control, auxiliary input, and headphone output keep everyday controls within easy reach.\u003c\/p\u003e\u003cp\u003eEach Eris 3.5 pair uses 50 watts of Class AB amplification, split as 25 watts per speaker. A 3.5-inch woven glass-fiber composite low-frequency driver handles the lower range, while a 1-inch ultra-low-mass silk-dome tweeter reproduces high frequencies. The system is specified for up to 98 dB peak SPL at one meter.\u003c\/p\u003e\u003cp\u003eFor placement flexibility, the Eris 3.5 includes continuously variable High and Low Acoustic Tuning controls. The high-frequency control adjusts response around 10 kHz, while the low-frequency control adjusts response around 100 Hz, each by up to ±6 dB. These controls can help tailor the speakers for desk placement, room acoustics, and personal listening preferences.\u003c\/p\u003e\u003cp\u003eConnection options include balanced 1\/4-inch TRS inputs, unbalanced RCA inputs, and a front-panel 1\/8-inch stereo line input for compatible line-level sources. A front-panel 1\/8-inch headphone output mutes the speakers when headphones are connected. The package includes the essential interconnect and speaker cables needed to begin a basic wired setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W Class AB Amplification:\u003c\/strong\u003e Delivers 25 watts to each speaker from the built-in amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Composite Woofer:\u003c\/strong\u003e Provides compact low-frequency reproduction for near-field listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk-Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a lightweight silk-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Tuning Controls:\u003c\/strong\u003e Lets you adjust high and low frequency response for your space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Analog Input Types:\u003c\/strong\u003e Supports balanced TRS, RCA, and front-panel 1\/8-inch stereo sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Headphone Output:\u003c\/strong\u003e Enables private listening and mutes the monitor speakers when used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe white Eris 3.5 pair uses vinyl-laminated medium-density fiberboard cabinets and a 2-way active monitor design. The active speaker houses the controls, inputs, power connection, and amplifier, while the matching passive speaker receives amplified signal through its bare-wire terminals. Each cabinet measures 5.6 inches wide by 8.3 inches high by 6.5 inches deep.\u003c\/p\u003e\u003cp\u003ePlace the monitors on a stable desk, shelf, or speaker stands with the tweeters near ear height and the pair aimed toward the listening position. Connect the supplied bare-wire speaker cable from the active speaker to the passive speaker, matching positive and negative terminals, then connect one line-level source by TRS, RCA, or the front 1\/8-inch input. The included foam feet can be fitted beneath both cabinets for isolation, and the rear tuning controls can be adjusted after placement.\u003c\/p\u003e","brand":"PreSonus","offers":[{"title":"Default Title","offer_id":45669127553094,"sku":"ERIS-3-5 WHITE","price":99.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71kVd2XkdNL.jpg?v=1784479735"},{"product_id":"zoom-h1essential-32-bit-float-stereo-handy-recorder","title":"Zoom H1essential 32-Bit Float Stereo Handy Recorder","description":"\u003cp\u003eThe Zoom H1essential is a compact stereo handheld recorder for musicians, podcasters, filmmakers, and creators who need dedicated audio capture away from a phone or camera. Its built-in 90-degree X\/Y microphone arrangement records a stereo image with natural left-to-right placement. It stores recordings to a microSD card and provides straightforward onboard recording and playback controls.\u003c\/p\u003e\u003cp\u003e32-bit float WAV recording is the core recording format, helping preserve usable detail when sources are very quiet or playback levels need adjustment in post-production. Recording is available in stereo or mono at 44.1, 48, or 96 kHz. This makes the H1essential well suited to location sound, rehearsals, interviews, ambience, and simple music demos.\u003c\/p\u003e\u003cp\u003eThe onboard X\/Y microphones are directional and rated to handle sound-pressure levels up to 120 dB SPL. A 3.5 mm MIC\/LINE IN jack adds support for an external microphone or line-level source, including microphones that need plug-in power. A selectable low-cut filter at 80, 160, or 240 Hz can help reduce wind and vocal pop noise.\u003c\/p\u003e\u003cp\u003eFor computer, smartphone, and tablet workflows, the USB-C connection supports both file transfer and USB microphone use. In USB microphone mode, the H1essential operates at 48 kHz\/16-bit with 2-in\/2-out audio. The 3.5 mm PHONE\/LINE OUT connection can feed headphones, a camera input, or another compatible device.\u003c\/p\u003e\u003cp\u003eThe H1essential also supports practical capture and review tools including pre-recording, automatic recording, overdubbing, markers, A-B repeat, and variable-speed playback. Firmware Version 2.0 added input-gain adjustment, AI Noise Reduction, and MP3 recording and export functions. Its small footprint, tripod mounting threads, built-in speaker, and AAA battery operation make it an easy addition to a portable recording kit.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Bit Float WAV Recording:\u003c\/strong\u003e Records 32-bit float WAV files for flexible level adjustment during editing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90-Degree X\/Y Stereo Microphones:\u003c\/strong\u003e Captures a focused stereo sound field with natural width.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 dB SPL Handling:\u003c\/strong\u003e Built-in microphones accommodate loud sources such as live performances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Microphone Mode:\u003c\/strong\u003e Works as a 48 kHz\/16-bit USB microphone with compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Mic\/Line Input:\u003c\/strong\u003e Connect a stereo mini-plug microphone or line-level source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFirmware 2.0 Features:\u003c\/strong\u003e Adds input gain, AI Noise Reduction, and MP3 functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H1essential uses a compact handheld layout with a high-contrast 128 x 64 OLED display, dedicated transport controls, a side-mounted volume control, and a POWER\/HOLD switch. Its built-in speaker allows quick playback without headphones, while the integrated tripod mounting threads support more stable placement. Quiet controls are designed to reduce handling noise during operation.\u003c\/p\u003e\u003cp\u003eInsert a compatible microSDHC or microSDXC card before recording, then power the unit with two AAA batteries, USB bus power, or the optional Zoom AD-17 AC adapter. Use the onboard X\/Y microphones for portable stereo capture, connect an external source through the MIC\/LINE IN jack when needed, or connect the PHONE\/LINE OUT jack to headphones, a camera, or another compatible input. For computer and mobile workflows, use a USB-C cable that supports data transfer.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669226905670,"sku":"ZH1essential","price":109.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ZSeXVXWdL.jpg?v=1784485358"},{"product_id":"zoom-h6essential-6-track-32-bit-float-handy-recorder","title":"Zoom H6essential 6-Track 32-Bit Float Handy Recorder","description":"\u003cp\u003eThe Zoom H6essential is a portable handheld recorder designed to capture multi-source audio without the conventional gain-setting workflow. Its included X\/Y microphone capsule and four XLR\/TRS combo inputs provide six standard input channels for music sessions, interviews, location sound, and podcast production. Recording is made directly to a compatible microSD card in 32-bit float WAV format.\u003c\/p\u003e\u003cp\u003eMusicians can connect microphones, mixers, and line-level sources to the four combo inputs while using the included X\/Y capsule for a stereo room or ensemble capture. Podcasters can record up to four XLR-connected voices while retaining the built-in mic capsule for ambience or additional sources. For video work, the 3.5 mm line output can feed a camera while the headphone output supports monitoring.\u003c\/p\u003e\u003cp\u003eThe included XYH-6e capsule uses a 90-degree X\/Y stereo arrangement with unidirectional microphones. It is specified for sound-pressure levels up to 135 dB SPL and is intended to provide a focused stereo image with natural depth and width. The H6essential also includes a built-in speaker for quick playback reference.\u003c\/p\u003e\u003cp\u003eDual A\/D converter circuits support the recorder's 32-bit float workflow by automatically selecting between converters with different input gains. This architecture is designed to preserve a broad usable dynamic range across quiet and loud source material. The recorder supports 44.1, 48, and 96 kHz WAV recording, along with BWF and iXML metadata support.\u003c\/p\u003e\u003cp\u003eThe H6essential can also serve as a USB-C audio interface for computers, smartphones, and tablets while recording to its SD card at the same time. Its 3.0 interchangeable capsule system supports compatible optional capsules, including the SSH-6e stereo shotgun capsule and EXH-6e dual XLR\/TRS input capsule. Optional BTA-1 hardware adds wireless remote-control and compatible wireless timecode capabilities.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Bit Float Recording:\u003c\/strong\u003e Records WAV files with a format designed to preserve usable detail across a wide range of input levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix Standard Input Channels:\u003c\/strong\u003e The included stereo X\/Y capsule and four combo inputs allow up to six channels to be captured in the standard configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour XLR\/TRS Inputs:\u003c\/strong\u003e Locking combo jacks accept XLR microphones and TRS line-level connections for flexible source hookup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Phantom Power:\u003c\/strong\u003e Each of the four XLR\/TRS inputs can supply +48 V phantom power for compatible condenser microphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Audio Interface:\u003c\/strong\u003e Provides 6-in\/2-out multichannel or 2-in\/2-out stereo interface operation and supports simultaneous SD-card recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Guidance:\u003c\/strong\u003e Built-in spoken menu guidance supports accessible navigation through the recorder's controls and settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H6essential uses a portable handheld-recorder layout with dedicated track buttons, a selection dial, physical transport controls, a 2.00-inch full-color LCD, and a POWER\/HOLD switch. Zoom does not publish a chassis-material specification, but the design includes a removable microphone capsule system, side-mounted input jacks, a battery compartment for four AA cells, and tripod mounting threads. A built-in speaker, 3.5 mm headphone output, and 3.5 mm line output support monitoring and playback without additional hardware.\u003c\/p\u003e\u003cp\u003eFor standalone recording, install a compatible microSDHC or microSDXC card, connect sources to the mic capsule and\/or inputs 1 through 4, and power the recorder with four AA batteries or USB-C power. Use XLR connections for dynamic or condenser microphones, enabling phantom power only for microphones that require it; use TRS connections for mixers and other line-level devices. Passive guitars and basses should be connected through a mixer or effects device rather than directly to the recorder.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669227561030,"sku":"ZH6essential","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61qhiEHtIIL.jpg?v=1784485648"},{"product_id":"arturia-keylab-essential-49-mk3-usb-midi-keyboard-controller","title":"Arturia KeyLab Essential 49 mk3 USB MIDI Keyboard Controller","description":"\u003cp\u003eThe Arturia KeyLab Essential 49 mk3 is a 49-key USB MIDI keyboard controller designed for hands-on music production, performance, and songwriting. It provides keyboard control, pads, faders, encoders, transport functions, and software navigation in one desktop-friendly controller. It is intended for musicians who want more direct control of virtual instruments and DAW projects than a computer keyboard and mouse can provide.\u003c\/p\u003e\u003cp\u003eThe velocity-sensitive hybrid synth-piano keybed supports expressive parts while retaining a compact controller format. Eight RGB pads can be used for MIDI notes, finger drumming, clip launching, and other assignable functions, while pitch and modulation wheels add familiar performance control. Chord mode, Scale mode, Hold, and the multi-mode arpeggiator help create melodic and rhythmic ideas without interrupting the writing process.\u003c\/p\u003e\u003cp\u003eKeyLab Essential 49 mk3 is built around practical DAW and instrument workflow rather than onboard sound generation. Its nine rotary encoders, nine 30 mm faders, transport switches, command switches, and clickable encoder provide tactile access to mix and instrument parameters. A 2.5-inch LCD display with contextual buttons supplies real-time feedback for presets, parameters, and navigation.\u003c\/p\u003e\u003cp\u003eFor software-based production, the controller integrates with Arturia Analog Lab and supports custom DAW scripts for Ableton Live, Logic Pro, FL Studio, Cubase, and Bitwig Studio. It also supports MCU\/HUI control protocols and offers up to six user presets for custom control assignments. The 5-pin MIDI output extends control to compatible external MIDI instruments such as synthesizers and drum machines.\u003c\/p\u003e\u003cp\u003eThis controller fits naturally into a computer-based recording setup, whether used as a first full-size production keyboard or as an upgrade from a smaller pad controller. USB-C supplies power and connects the keyboard to a computer and Arturia MIDI Control Center. A rear control-pedal input can be assigned for sustain, expression, or footswitch operation, helping tailor the controller to studio or performance needs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e49-Key Hybrid Keybed:\u003c\/strong\u003e Velocity-sensitive keys provide a synth-piano playing feel for melodic, chordal, and bass parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Performance Pads:\u003c\/strong\u003e Eight touch- and pressure-sensitive pads support drums, notes, clips, and customizable assignments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreative Play Modes:\u003c\/strong\u003e Chord, Scale, Hold, and multi-mode arpeggiator functions help develop musical ideas quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAW Control Surface:\u003c\/strong\u003e Nine faders, encoders, transport controls, and custom scripts streamline software production workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch LCD Display:\u003c\/strong\u003e Contextual controls and real-time visual feedback simplify preset browsing and parameter adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal MIDI Connectivity:\u003c\/strong\u003e USB-C, 5-pin MIDI output, and pedal input support computer-based and hardware MIDI setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KeyLab Essential 49 mk3 uses a focused desktop layout with a 49-note keyboard, dedicated performance controls, RGB pads, faders, encoders, and a central display. Its hybrid synth-piano keybed is velocity-sensitive, and the controller uses a minimum of 40% recycled plastic. Arturia also specifies 100% recyclable packaging for the mk3 series.\u003c\/p\u003e\u003cp\u003eConnect the included USB-A-to-USB-C cable between the controller and a compatible computer for power and MIDI communication. Install the desired DAW and included software, then select the appropriate KeyLab Essential integration or control protocol within the software. A compatible pedal can be connected to the control input for sustain, expression, or footswitch duties, while the 5-pin MIDI output can connect the controller to external MIDI gear.\u003c\/p\u003e","brand":"Arturia","offers":[{"title":"Default Title","offer_id":45669357191238,"sku":"KEYLAB ESSENTIAL 49","price":249.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71VF1iPO7TL.jpg?v=1784494032"},{"product_id":"arturia-minilab-3-25-key-universal-midi-controller","title":"Arturia MiniLab 3 25-Key Universal MIDI Controller","description":"\u003cp\u003eThe Arturia MiniLab 3 is a compact 25-key MIDI controller for making music with a computer, compatible iPad, or external MIDI equipment. It gives producers and performers hands-on control of virtual instruments, DAW functions, clips, and software parameters without relying entirely on a mouse. Its small footprint suits home studios, mobile production setups, learning environments, and desktop workspaces where space is limited.\u003c\/p\u003e\u003cp\u003eThis controller is designed for musicians who want to play melodies, program drums, shape sounds, and adjust mix functions from one compact surface. The velocity-sensitive slim keys provide expressive MIDI note input, while the RGB pads can be used for finger drumming, clip launching, performance functions, or transport control. Eight encoders and four faders add direct access to assignable sound and project controls.\u003c\/p\u003e\u003cp\u003eMiniLab 3 does not generate audio on its own; it sends MIDI data to software instruments, DAWs, or connected MIDI hardware. Its performance character comes from responsive key, pad, touch-strip, encoder, and fader control rather than an onboard sound engine. Built-in arpeggiator, chord, hold, octave, and semitone transpose functions help turn simple note input into playable musical parts.\u003c\/p\u003e\u003cp\u003eArturia integrates MiniLab 3 with Analog Lab and supports DAW workflows through dedicated scripts or MCU\/HUI control where applicable. The mini display and clickable browser encoder provide visual feedback while navigating presets and controller functions. Up to five user presets support customized mappings for different instruments, software projects, or external MIDI devices.\u003c\/p\u003e\u003cp\u003eFor a production system, MiniLab 3 can serve as the front-end controller for a laptop-based studio, iPad music setup, or MIDI hardware rig. USB-C provides computer and iPad connectivity and bus power, while the 5-pin DIN MIDI output can address external instruments. A pedal input also lets players add sustain, expression, or footswitch control to a compact keyboard workflow.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 Velocity-Sensitive Slim Keys\u003c\/strong\u003e Compact keys provide expressive MIDI note input for melodies, bass lines, and chords.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Performance Pads\u003c\/strong\u003e Eight velocity- and pressure-sensitive pads support drums, clips, transport functions, and custom assignments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Endless Encoders\u003c\/strong\u003e Rotary controls provide hands-on adjustment of mapped instrument and DAW parameters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Assignable Faders\u003c\/strong\u003e Faders offer direct control of levels, effects, and other software functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C and MIDI DIN\u003c\/strong\u003e Connect to computers, compatible iPads, and external MIDI equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCreative Play Modes\u003c\/strong\u003e Arpeggiator, chord, hold, octave, and transpose functions expand performance options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eMiniLab 3 combines a compact white enclosure with a 25-key slim keyboard, RGB-lit pads, low-profile pitch and modulation touch strips, faders, encoders, and a high-contrast OLED display. Arturia states that the controller is made with a minimum of 50% recycled plastic and ships in fully recyclable cardboard packaging. Its layout groups playing, browsing, performance, and mixing controls into a portable desktop-oriented format.\u003c\/p\u003e\u003cp\u003eConnect the included USB-C to USB-A cable directly to a computer USB port for power and MIDI communication, or use USB-C with a compatible iPad setup. Connect external synths or MIDI devices through the 5-pin DIN MIDI output, and connect an optional sustain, expression, or footswitch pedal to the 1\/4-inch TRS control input. Install the included or chosen music software, select MiniLab 3 in the software MIDI settings, and use Arturia's dedicated DAW scripts when available for deeper control integration.\u003c\/p\u003e","brand":"Arturia","offers":[{"title":"Default Title","offer_id":45669368102982,"sku":"MINILAB 3","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51EjMyfRuyL.jpg?v=1784495187"},{"product_id":"mackie-cr3-5-3-5-powered-studio-monitors","title":"Mackie CR3.5 3.5\" Powered Studio Monitors","description":"\u003cp\u003eThe Mackie CR3.5 is a compact pair of powered 3.5-inch studio monitors designed for desktop production, content creation, gaming, and everyday music listening. One speaker contains the amplification and connections, while the included speaker wire links it to the companion passive speaker. This arrangement provides a straightforward nearfield listening setup without requiring a separate amplifier.\u003c\/p\u003e\u003cp\u003eFor creators, the CR3.5 offers a transparent tone setting intended for tracking and mixing at close range. Its 3.5-inch woven woofers and 1-inch silk-dome tweeters are paired with a 3.0 kHz crossover and a custom-tuned rear port. The system is rated for 50 watts RMS of bi-amplified Class A\/B power and reaches a specified peak output of 100 dB.\u003c\/p\u003e\u003cp\u003eA front-panel tone control lets listeners adjust the presentation for the task at hand. Turned fully counter-clockwise, it provides the monitor's transparent response; rotating it clockwise adds bass presence and brighter high frequencies. A separate front volume control manages the level from all connected sources and also switches the powered monitor on or off.\u003c\/p\u003e\u003cp\u003eThe CR3.5 accepts balanced or unbalanced 1\/4-inch TRS connections, stereo RCA sources, and a 3.5 mm stereo line input. These inputs can remain connected at the same time and are summed rather than automatically switched. A front 3.5 mm headphone output provides private listening and mutes the speaker power amplifier when headphones are connected.\u003c\/p\u003e\u003cp\u003eThe rear-panel location switch supports desktop and bookshelf listening positions, helping adapt the monitors for close listening or placement farther away. A left\/right powered-speaker position selector lets the amplified speaker sit on either side of a workspace. For users who want more low-frequency extension, the monitors can be used as part of a larger playback setup with a compatible line-level source and subwoofer arrangement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Watt RMS Amplification:\u003c\/strong\u003e Bi-amplified Class A\/B power drives the monitor pair without an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Woven Woofers:\u003c\/strong\u003e Compact drivers handle the low- and mid-frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk-Dome Tweeters:\u003c\/strong\u003e Dedicated high-frequency drivers include protective grilles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone Control:\u003c\/strong\u003e Adjusts from transparent monitoring toward enhanced bass and highs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation Switch:\u003c\/strong\u003e Select desktop or bookshelf mode for the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Line Inputs:\u003c\/strong\u003e Connect through 1\/4-inch TRS, RCA, or 3.5 mm inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CR3.5 uses rectangular solid-MDF enclosures finished in black vinyl wrap. Each cabinet includes a custom-tuned rear port tube that extends low-frequency response using rear woofer radiation. The powered speaker has a white power-ring LED surrounding the Mackie Running Man logo, while the companion passive speaker does not illuminate.\u003c\/p\u003e\u003cp\u003ePlace the monitors on a desktop for close nearfield listening or farther away on a shelf with the appropriate location mode selected. Connect a line-level source only; do not connect a power-amplifier output to the monitor inputs. Use the included red-and-black speaker wire to connect the powered and passive cabinets through their spring clips, matching positive and negative terminals.\u003c\/p\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":45669384323142,"sku":"CR3-5","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71OpVseqjZL.jpg?v=1784496168"},{"product_id":"mackie-profx10v3-10-channel-analog-usb-mixer","title":"Mackie PROFX10V3 10-Channel Analog USB Mixer","description":"\u003cp\u003eThe Mackie PROFX10V3 is a compact 10-channel analog mixer with USB recording for live sound, home studios, streaming, and content production. It brings microphones, instruments, stereo sources, and computer audio together in one hands-on control surface. Four Onyx microphone preamps provide the front end for vocal, spoken-word, and instrument capture.\u003c\/p\u003e\u003cp\u003eThis mixer is well suited to creators and performers who need more control than a basic audio interface provides. Its channel processing, built-in effects, and dedicated monitoring controls help manage a small live rig or desktop recording setup. Channels 1 and 2 also support direct Hi-Z instrument connection, reducing the need for a separate DI box in compatible setups.\u003c\/p\u003e\u003cp\u003eAudio is routed to a computer through USB 2.0 with 24-bit conversion and selectable sample rates up to 192 kHz. The USB system supports one stereo input and two stereo outputs, enabling separate playback routing alongside the main mix. A blend control supports direct hardware monitoring for overdub work without relying solely on computer monitoring.\u003c\/p\u003e\u003cp\u003eThe GigFX engine supplies 24 onboard effect presets, including room, hall, plate, chorus, delay, echo, flange, and slapback-style effects. One-knob compression on channels 1 and 2 helps manage dynamic vocal or instrument sources. Three-band EQ and a 100 Hz low-cut filter on mic-input channels provide practical tone shaping at the mixer.\u003c\/p\u003e\u003cp\u003eFor a complete small system, connect microphones and instruments to the input channels, route the main outputs to powered speakers or an amplifier, and use the headphone\/control-room output for monitoring. The PROFX10V3 also includes an FX send, footswitch connection for FX mute, and channel inserts for compatible external processing. Its compact format can serve as the central mixer for a desktop workstation, rehearsal space, podcast setup, or compact performance rig.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Channel Analog Mixing:\u003c\/strong\u003e Combines microphone, instrument, stereo line, and computer audio sources in one mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Onyx Mic Preamps:\u003c\/strong\u003e Provides up to 60 dB of gain for compatible microphones and sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz USB Audio:\u003c\/strong\u003e Connects to a computer for high-resolution recording and playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGigFX Effects Engine:\u003c\/strong\u003e Adds 24 selectable effects presets without requiring an external processor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Hardware Monitoring:\u003c\/strong\u003e Blends computer playback with the mixer feed for practical overdub monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel 1\/2 Hi-Z Inputs:\u003c\/strong\u003e Allows direct connection of guitars and other high-impedance instruments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PROFX10V3 uses a compact tabletop mixer layout with dedicated channel controls, main meters, a preset display, and front-panel main outputs. Mackie specifies a rugged design, while the published documentation focuses on the mixer’s physical controls and connection layout rather than naming a specific chassis material. At 10.7 inches wide and 4.9 pounds, it is sized for portable use and fixed desktop setups.\u003c\/p\u003e\u003cp\u003eConnect microphones to the XLR inputs, line-level sources to the appropriate 1\/4-inch or stereo inputs, and powered speakers or an amplifier to the main outputs. Channels 1 and 2 accept balanced mic or line signals through combo inputs and can be switched to Hi-Z for direct instruments. For computer recording, connect the USB-B port to a compatible computer, set levels before raising the main output, and use the headphone\/control-room blend control when tracking overdubs.\u003c\/p\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":45669396021318,"sku":"PROFX10V3","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61hpfwWg6mL.jpg?v=1784498592"},{"product_id":"se-electronics-v7-dynamic-supercardioid-vocal-microphone","title":"sE Electronics V7 Dynamic Supercardioid Vocal Microphone","description":"\u003cp\u003eThe sE Electronics V7 is a wired dynamic handheld microphone designed for live vocals, speech, broadcasting, podcasting, and instrument recording. Its supercardioid pickup pattern focuses on the intended source while helping reduce pickup from surrounding stage sound. It connects through a standard 3-pin XLR output for use with compatible mixers, audio interfaces, preamps, and PA systems.\u003c\/p\u003e\u003cp\u003eBuilt around the DMC7 dynamic capsule, the V7 uses an aluminum voice coil and neodymium magnet. Its specified 40 Hz to 19 kHz frequency range and 2.0 mV\/Pa sensitivity support a detailed, open vocal presentation without requiring phantom power. The microphone can also be used on sources such as electric guitar cabinets and drums.\u003c\/p\u003e\u003cp\u003eThe supercardioid pattern is intended for close-miked use where isolation matters. This can be useful on louder stages, rehearsal rooms, houses of worship, and recording spaces where monitor speakers or nearby instruments may otherwise enter the microphone. As with other directional microphones, placement relative to PA speakers and monitors remains important for feedback control.\u003c\/p\u003e\u003cp\u003eA patented integrated shockmount isolates the capsule from mechanical vibration to help reduce handling, footfall, and low-frequency rumble. The internal windscreen helps reduce wind noise and plosive sounds during close vocal use. The standard V7 includes a red internal windscreen plus a spare black internal windscreen.\u003c\/p\u003e\u003cp\u003eThe V7 is an appropriate upgrade for performers and creators who need a durable XLR vocal microphone with focused pickup and a practical handheld format. It can be used directly with an existing mixer or interface that provides a microphone input, or added to a PA and recording setup as a dedicated vocal or instrument microphone. Its included stand clip and thread adapter also make fixed-position use straightforward.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic DMC7 Capsule:\u003c\/strong\u003e Uses a dynamic capsule designed for vocals, speech, and selected instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupercardioid Pickup:\u003c\/strong\u003e Helps focus on the sound source while reducing surrounding stage bleed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Voice Coil:\u003c\/strong\u003e Supports the V7's specified open and detailed sound character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Shockmount:\u003c\/strong\u003e Helps reduce handling noise, vibration, and low-frequency rumble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Windscreen:\u003c\/strong\u003e Internal windscreen helps reduce plosives and unwanted wind noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Output:\u003c\/strong\u003e Provides a standard 3-pin balanced microphone connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V7 uses an all-metal zinc-alloy chassis with a beveled spring-steel mesh grille. The beveled grille edge is designed to help keep the microphone from rolling when placed on a flat surface. Its 54 mm diameter, 184 mm length, and 305 g weight provide a substantial handheld format for stage and studio work.\u003c\/p\u003e\u003cp\u003eConnect the V7's 3-pin male XLR output to a compatible microphone cable, then connect the cable to a mixer, microphone preamp, recording interface, or PA input. Point the microphone toward the voice or instrument and keep PA speakers positioned behind the microphone to reduce feedback risk. For stand use, install the included microphone clip and thread adapter on a compatible mic stand.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669466734662,"sku":"V7","price":89.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81RN5dkz-XL.jpg?v=1784505488"},{"product_id":"se-electronics-x1-a-large-diaphragm-condenser-microphone","title":"sE Electronics X1 A Large-Diaphragm Condenser Microphone","description":"\u003cp\u003eThe sE Electronics X1 A is a wired cardioid condenser microphone for studio recording, podcasting, vocals, instruments, and close-miked sources. It connects through a standard 3-pin XLR output and is designed for use with microphone preamps or audio interfaces that provide 48 V phantom power. Its focused cardioid pickup pattern helps prioritize the sound in front of the microphone while reducing pickup from the rear.\u003c\/p\u003e\u003cp\u003eBuilt for creators who need one microphone for varied sessions, the X1 A is suited to vocals, acoustic instruments, guitar cabinets, drums, brass, piano, and room recording. Its frequency range extends from 20 Hz to 20 kHz, with a balanced response intended for detailed capture. The microphone's 20 mV\/Pa sensitivity supports practical use with typical recording interfaces and console preamps.\u003c\/p\u003e\u003cp\u003eA switchable -20 dB attenuation pad expands the X1 A's usable range for high-volume sources and close-miking. With the pad disengaged, it handles up to 130 dB SPL; with the pad engaged, maximum SPL handling reaches 150 dB SPL at 0.5% THD and 1 kHz. This makes it suitable for louder applications such as amplified guitar, brass, and drum recording when paired with an appropriate preamp gain setting.\u003c\/p\u003e\u003cp\u003eThe X1 A also includes a switchable 100 Hz low-cut filter with a 6 dB-per-octave slope. This filter can help reduce rumble, footfall noise, and excess low-frequency buildup from close placement. Used alongside careful microphone positioning, it gives recording setups a straightforward way to manage unwanted low end before the signal reaches the recording chain.\u003c\/p\u003e\u003cp\u003eIts 2\/3-inch back-electret condenser capsule is housed in a durable all-metal chassis with an integrated windscreen and a gold-plated XLR connector. The internal windscreen helps reduce wind noise and plosive effects while protecting the capsule. The X1 A can serve as a primary entry-level studio microphone or as a flexible additional microphone in a growing recording setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Pickup Pattern:\u003c\/strong\u003e Focuses on the source in front of the microphone and reduces rear pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\/3-Inch Condenser Capsule:\u003c\/strong\u003e Captures vocals and instruments with a broad 20 Hz to 20 kHz frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable -20 dB Pad:\u003c\/strong\u003e Supports close-miking and louder sources by reducing the incoming signal level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 Hz Low-Cut Filter:\u003c\/strong\u003e Helps manage rumble, footfall noise, and excess proximity-effect bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 dB Maximum SPL:\u003c\/strong\u003e Handles high sound-pressure sources when the attenuation pad is engaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-Metal Housing:\u003c\/strong\u003e Provides durable physical protection and helps reject electrical interference.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X1 A uses an all-metal body, an integrated windscreen, and a gold-plated 3-pin male XLR connector. It measures 58 mm in diameter and 169 mm long, with a microphone weight of 390 g. The package includes a swivel microphone clip and a microphone-stand thread adapter for physical mounting.\u003c\/p\u003e\u003cp\u003eMount the microphone on a stable stand using the included clip and adapter, then connect its XLR output to a compatible microphone preamp, mixer, or audio interface. Enable 48 V phantom power only through equipment intended to supply P48 power, and begin with conservative preamp gain. For loud instruments or close placement, engage the -20 dB pad; use the 100 Hz low-cut filter when low-frequency noise or buildup needs reduction.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669492883526,"sku":"X1 A","price":91.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61YvTnJ9KaL.jpg?v=1784508332"}],"url":"https:\/\/audiowatt.store\/collections\/top-sellers.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}