{"title":"Subwoofer Boxes \u0026 Enclosures","description":null,"products":[{"product_id":"audison-apbx10ds-prima-10-sealed-subwoofer-enclosure","title":"Audison APBX10DS Prima 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Audison APBX10DS is a passive 10-inch subwoofer system supplied in a compact, sealed enclosure. It is designed for adding controlled low-frequency output to a vehicle audio system without building a custom subwoofer box. Its 12-liter enclosure and shallow overall profile help make it practical for trunk installations where available space is limited.\u003c\/p\u003e\u003cp\u003eThis model uses a dual 4-ohm subwoofer configuration and is rated for 400 watts continuous power handling and 800 watts peak power handling. It is intended for use with an external subwoofer amplifier, rather than operating as a powered enclosure. The sealed-box design supports a concise, controlled bass character suited to a wide range of music.\u003c\/p\u003e\u003cp\u003eThe enclosure uses Audison's 2S², or 2 Sides\/2 Sounds, layout. It can be installed with the driver facing down to emphasize low-frequency extension, or facing up for a more direct presentation with added punch and definition. This gives installers flexibility to tune placement around cargo-space and listening priorities.\u003c\/p\u003e\u003cp\u003eThe APBX10DS is built around the APS 10 D driver, with a high-density flux ferrite motor and a water-repellent pressed-paper cone. Its cone, dustcap, and basket geometry is engineered for long linear excursion, specified at 11 mm one-way. A substantial motor assembly optimized with FEM modeling helps maintain driver control during higher-excursion operation.\u003c\/p\u003e\u003cp\u003eFor system integration, the enclosure includes Audison's SSP Sub Smart Plug connection system, combining conventional push terminals with a plug-and-play terminal block. It was developed to pair with compatible Audison amplified and DSP-based systems, while its passive design also leaves amplifier selection to the installer. Leveling feet with Velcro inserts and a supplied metal protection grille support practical everyday installation and use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Sealed Enclosure:\u003c\/strong\u003e Delivers installed bass reinforcement in a compact 12-liter cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Handling:\u003c\/strong\u003e Supports matching with a suitably rated external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Configuration:\u003c\/strong\u003e Provides impedance setup flexibility through the enclosure connection system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Mounting Design:\u003c\/strong\u003e Allows down-firing or up-firing installation to suit the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSP Sub Smart Plug:\u003c\/strong\u003e Combines push terminals and a quick-release plug-and-play terminal block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Driver Grille:\u003c\/strong\u003e Helps protect the subwoofer driver in cargo-area installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBX10DS uses a sealed, ultra-low-profile cabinet with rounded corners that aid positioning and help reinforce the enclosure structure. Its 10-inch driver combines a high-density flux ferrite magnet with a water-repellent pressed-paper cone. The supplied metal grille provides driver protection, while leveling feet with Velcro inserts help keep the enclosure stable on carpeted surfaces.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer enclosure and requires an external amplifier plus appropriate signal routing and power wiring. Confirm amplifier stability and configure the 4+4-ohm impedance through the SSP connection system before final wiring. The enclosure may be mounted driver-up or driver-down, but allow clearance for the grille, feet, wiring connection, and driver movement.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614221295686,"sku":"APBX10DS","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pmR6NyCjL.jpg?v=1784362282"},{"product_id":"audison-avbx-10-d4-ii-10-sealed-subwoofer-enclosure","title":"Audison AVBX 10 D4 II 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Audison AVBX 10 D4 II is a compact, passive 10-inch sealed subwoofer enclosure designed for vehicle audio systems where installation space is limited. It combines a factory-loaded AV 10 D4 II dual-voice-coil subwoofer with an enclosure acoustically matched to the driver. This makes it a practical low-frequency upgrade for OEM-integrated and custom car audio systems.\u003c\/p\u003e\u003cp\u003eIts sealed, ultra-shallow enclosure is intended to produce controlled and articulate bass while taking up less space than a conventional large subwoofer box. The 25-400 Hz frequency response supports low-bass reproduction as well as integration with a properly configured front speaker system. With 550 watts continuous power handling, it is suited to an external amplifier selected and set up for the subwoofer's dual 4-ohm voice-coil configuration.\u003c\/p\u003e\u003cp\u003eThe AVBX 10 D4 II uses a 4+4-ohm dual voice coil, giving an installer flexibility when planning amplifier and system wiring. The loaded AV 10 D4 II driver uses a CCAW voice coil, glass-fiber former, polypropylene cone with mica injection, and rubber surround. Its 16.8 mm Xmax and 20 mm Xmech specifications support controlled cone travel within the enclosure design.\u003c\/p\u003e\u003cp\u003eAudison builds the enclosure from 15 mm high-density MDF and adds internal bracing to help limit panel vibration and unwanted enclosure resonance. The driver uses an aluminum chassis and high-density-flux ferrite magnet assembly. Together, these construction details support a rigid platform for the installed subwoofer.\u003c\/p\u003e\u003cp\u003eFor placement flexibility, Audison's 2S² architecture allows the AVBX 10 D4 II to be used in either down-firing or up-firing orientation. Its Sub Smart Plug terminal combines a plug-and-play quick-release connection with conventional push terminals. This makes the enclosure appropriate for installations that require accessible wiring or periodic removal for cargo-space use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Loaded Enclosure:\u003c\/strong\u003e A complete sealed subwoofer box with a 250 mm AV 10 D4 II driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Supports systems using an appropriately matched external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Design:\u003c\/strong\u003e Helps fit bass reinforcement into space-conscious vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm MDF Construction:\u003c\/strong\u003e High-density panels and internal bracing help control enclosure vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation System:\u003c\/strong\u003e Supports either down-firing or up-firing placement in the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVBX 10 D4 II uses a sealed enclosure constructed from 15 mm high-density MDF with internal bracing. The installed subwoofer features an aluminum chassis, high-density-flux ferrite magnet, CCAW voice coil, glass-fiber former, polypropylene-with-mica cone, and rubber surround. Audison specifies a compact enclosure footprint with dimensions identified as A: 531 mm, B: 361 mm, and C: 160 mm.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer box, so it requires an external amplifier and proper speaker wiring; an installer should account for the dual 4-ohm voice coils when designing the final load. Use the Sub Smart Plug connection for quick removal where appropriate, or use the integrated push terminals for conventional wiring. Confirm vehicle clearance, mounting security, amplifier compatibility, and the intended up-firing or down-firing orientation before installation.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614239252550,"sku":"AVBX 10 D4 II","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81NZcuA8DHL.jpg?v=1784363628"},{"product_id":"audison-avbx-12-d4-ii-12-sealed-subwoofer-box","title":"Audison AVBX 12 D4 II 12\" Sealed Subwoofer Box","description":"\u003cp\u003eThe Audison AVBX 12 D4 II is a loaded 12-inch passive subwoofer enclosure designed for vehicle systems that need substantial low-frequency support without requiring a deep enclosure. Its sealed, ultra-shallow format helps it fit more easily in space-conscious trunk and cargo-area installations. It is built around the matching Audison AV 12 D4 II dual-voice-coil subwoofer.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners building an OEM-upgrade or custom car-audio system who want controlled bass from a ready-to-install box. The sealed alignment is engineered for defined bass notes and natural decay rather than the character of a ported enclosure. Its 25-400 Hz rated frequency response supports integration with a properly configured front speaker system.\u003c\/p\u003e\u003cp\u003eThe installed AV 12 D4 II driver uses dual 4-ohm voice coils, providing flexibility when planning amplifier load and wiring configuration. It is rated for 550 watts continuous power handling and 1100 watts peak power handling. A 84.5 dB sensitivity rating and 16.8 mm Xmax support meaningful low-frequency output when paired with a suitable amplifier.\u003c\/p\u003e\u003cp\u003eAudison uses a high-density 15 mm MDF enclosure with internal bracing to help control panel vibration and enclosure resonance. The loaded driver combines an aluminum chassis, high-density-flux ferrite magnet, CCAW voice coil, glass-fiber former, and polypropylene cone with mica injection. These materials are selected to support rigidity, excursion control, and dependable thermal behavior.\u003c\/p\u003e\u003cp\u003eThe AVBX 12 D4 II is part of Audison's VOCE II system family and can serve as the bass foundation of a component-speaker upgrade. Its 2S² architecture supports either down-firing or up-firing placement according to available vehicle space and acoustic goals. The integrated Sub Smart Plug terminal provides both plug-and-play and push-connector connection options for system integration and service access.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes the AV 12 D4 II subwoofer in a purpose-matched sealed box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility when matching a compatible subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Supports substantial amplifier power with appropriate setup and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Design:\u003c\/strong\u003e Helps preserve cargo space while supporting controlled bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm Braced MDF Cabinet:\u003c\/strong\u003e Adds enclosure rigidity and helps reduce unwanted panel resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation Architecture:\u003c\/strong\u003e Allows down-firing or up-firing placement to suit the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVBX 12 D4 II uses a sealed enclosure constructed from high-density 15 mm MDF with internal bracing. Its driver features an aluminum chassis, high-density-flux ferrite magnet, CCAW voice coil, glass-fiber former, polypropylene-with-mica cone, and rubber surround. The enclosure measures 607 mm by 401 mm by 175 mm across dimensions A, B, and C in Audison's dimensional drawing.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer box, so it requires a separate compatible amplifier, wiring, and signal integration in the vehicle. Use the dual 4-ohm voice-coil configuration only with an amplifier that is stable at the resulting wired load, and set crossover and gain controls correctly for the system. Measure the intended mounting area before purchase, then choose down-firing or up-firing orientation based on clearance and the desired installation layout.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614240596038,"sku":"AVBX 12 D4 II","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81DRsulNAfL.jpg?v=1784363677"},{"product_id":"cerwin-vega-h6e10dv-dual-10-vented-subwoofer-enclosure","title":"Cerwin-Vega H6E10DV Dual 10\" Vented Subwoofer Enclosure","description":"\u003cp\u003eThe Cerwin-Vega H6E10DV is a loaded passive subwoofer enclosure built around two 10-inch HED Series subwoofers. It gives a car audio system a dedicated low-frequency foundation without requiring the buyer to select an enclosure and separate woofers. The preloaded design is intended for drivers who want a straightforward bass upgrade from a single enclosure.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want more bass presence for daily driving and bass-forward music. Its dual-subwoofer layout provides greater cone area than a single 10-inch enclosure. The finished assembly keeps the system focused on low-frequency reproduction while leaving the main speakers to handle mids and highs.\u003c\/p\u003e\u003cp\u003eThe H6E10DV uses a factory-tuned vented enclosure, a design that uses a port to support efficient low-frequency output. Cerwin-Vega rates the complete enclosure for 500 watts RMS and 2,000 watts maximum power handling. Its final wired impedance is 2 ohms, so amplifier compatibility should be confirmed before installation.\u003c\/p\u003e\u003cp\u003eEach subwoofer uses a polypropylene cone with a treated-foam surround, stamped-steel basket, ferrite magnet, and 2-inch voice coil. The stated frequency response is 20 Hz to 500 Hz. These material choices are paired with a 3\/4-inch MDF enclosure to provide a substantial platform for the loaded drivers.\u003c\/p\u003e\u003cp\u003eThe H6E10DV is a passive enclosure rather than a powered subwoofer, so it requires a separate external car amplifier and appropriate wiring. It can be used with an aftermarket receiver or a factory-audio integration setup that provides a suitable amplifier signal path. With its 30-inch length, check available cargo-area space before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Drivers:\u003c\/strong\u003e Two HED Series subwoofers are preinstalled in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports substantial continuous amplifier power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for an amplifier stable at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented MDF Enclosure:\u003c\/strong\u003e Factory-tuned ported construction supports efficient bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cones:\u003c\/strong\u003e Durable cone material paired with treated-foam surrounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grille:\u003c\/strong\u003e Includes a grille to help protect the subwoofer area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses 3\/4-inch medium-density fiberboard with a black carpet exterior. It has a rectangular form factor, factory-embroidered Cerwin-Vega Mobile branding, and a protective grille. The internal subwoofers use stamped-steel baskets and ferrite ceramic magnets.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in the vehicle cargo area so it cannot move during driving or high-output playback. Connect its single binding-post terminal to a compatible external amplifier, and verify that the amplifier is stable at the enclosure's 2-ohm final impedance. Measure the planned location against the 30-inch long by 13-inch high by 13-inch wide enclosure dimensions before installation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614397456454,"sku":"CER-H6E10DV","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UXcFiip7L.jpg?v=1784367567"},{"product_id":"cerwin-vega-h6e12sv-12-vented-subwoofer-enclosure","title":"Cerwin-Vega H6E12SV 12\" Vented Subwoofer Enclosure","description":"\u003cp\u003eThe Cerwin-Vega H6E12SV is a loaded, passive 12-inch subwoofer enclosure for adding low-frequency output to a car audio system. It combines one HED Series subwoofer with a factory-tuned vented cabinet, so the subwoofer and enclosure are already matched. Because it is passive, it requires an external amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to drivers who want a straightforward bass upgrade without selecting a separate raw subwoofer and building a custom box. Its 2-ohm final impedance and 250-watt RMS power handling make amplifier matching an important part of the installation. The vented design is intended to provide strong low-bass presence in a compact, ready-to-use format.\u003c\/p\u003e\u003cp\u003eThe installed subwoofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, and ferrite ceramic magnet. These materials support a durable mobile-audio driver design while the 2-inch voice coil handles the enclosure's rated power range. Cerwin-Vega lists a 20 Hz to 500 Hz frequency response for the loaded enclosure.\u003c\/p\u003e\u003cp\u003eThe cabinet is built from 3\/4-inch medium-density fiberboard and finished in black carpet. Its angled hatchback-style profile is designed for common trunk and cargo-area installations. The enclosure measures approximately 21 inches long by 15 inches wide by 14 inches high.\u003c\/p\u003e\u003cp\u003ePair the H6E12SV with a stable external amplifier that is appropriate for a 2-ohm load and rated near its 250-watt RMS handling. It can be used as the bass foundation of a factory-radio upgrade when the proper amplifier integration hardware is added. A compatible 12-inch HED mesh grille is available separately from Cerwin-Vega for added driver protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes one preinstalled HED Series subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design:\u003c\/strong\u003e Lets you choose a compatible external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Handling:\u003c\/strong\u003e Supports properly matched amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for compatible 2-ohm amplifier operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Cabinet:\u003c\/strong\u003e Uses a ported enclosure alignment for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-Inch MDF Construction:\u003c\/strong\u003e Provides a rigid enclosure structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H6E12SV uses a 3\/4-inch MDF vented enclosure with a black carpet exterior and an angled hatchback-style cabinet shape. The installed driver combines a polypropylene cone, treated-foam surround, stamped-steel basket, ferrite magnet, and 2-inch voice coil. Its single-voice-coil configuration presents a 2-ohm final load.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a trunk, hatch, or cargo area where its 21 x 15 x 14 inch dimensions will fit while leaving clearance for the port and wiring. Connect it to a properly installed external amplifier that is stable at 2 ohms, then set gain and low-pass filtering conservatively to match the system. The enclosure has one binding-post terminal connection; use appropriate speaker wire and follow amplifier and vehicle wiring safety practices.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614404141126,"sku":"CER-H6E12SV","price":229.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71yMKzB1XAL.jpg?v=1784367631"},{"product_id":"cerwin-vega-vpas68-6-x-8-powered-underseat-subwoofer","title":"Cerwin Vega VPAS68 6 x 8\" Powered Underseat Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VPAS68 is a compact active subwoofer enclosure designed to add low-frequency support to a vehicle audio system without consuming much cargo space. Its integrated mono amplifier and loaded 6 x 8-inch subwoofer combine the major bass components in one enclosure. The slim 2.8-inch height makes it a practical option for many underseat or other space-restricted installations.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want more bass from a factory or aftermarket stereo while keeping the installation focused and compact. It accepts either RCA low-level input or speaker-level input, allowing it to work with a variety of source units. A wired remote level control is included for adjusting subwoofer output from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eThe VPAS68 is rated for 100 watts RMS and 300 watts maximum power at a 4-ohm final impedance. Its frequency response is specified at 20 Hz to 150 Hz, with an adjustable low-pass filter to blend the subwoofer with the vehicle's main speakers. Input gain, bass boost, and phase controls provide useful adjustment during setup.\u003c\/p\u003e\u003cp\u003eIts all-in-one layout uses a built-in Class D monoblock amplifier with a PWM MOSFET power supply and thermal-protection circuit. The amplifier is integrated with a cast aluminum heatsink for heat dissipation. A high-temperature voice coil, polypropylene cone, and rubber surround support everyday mobile-audio use.\u003c\/p\u003e\u003cp\u003eThe VPAS68 can serve as a straightforward bass upgrade for systems that do not need a separate amplifier and large subwoofer enclosure. RCA input is the preferred connection when a head unit or signal processor provides RCA outputs, while high-level inputs support systems without them. It is suited to installations where measured available space and secure mounting are prioritized.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 6 x 8-Inch Format:\u003c\/strong\u003e Adds bass support in a slim enclosure designed for tight vehicle spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Class D Amplifier:\u003c\/strong\u003e Combines the amplifier and loaded subwoofer in one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power:\u003c\/strong\u003e Provides a measured power rating for a compact powered bass upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Connects to aftermarket radios, processors, or factory speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Sets the upper bass range from 50 Hz to 150 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer level from a mounted control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VPAS68 uses a sealed underseat-style enclosure with a black Coated Tough Guard finish. Its integrated amplifier is housed with a cast aluminum heatsink, while the 6 x 8-inch woofer uses a polypropylene cone, rubber surround, ferrite magnet, and high-temperature copper voice coil. Power and protect LEDs provide operating-status indication.\u003c\/p\u003e\u003cp\u003eBefore purchasing, measure the intended mounting area against the enclosure dimensions of 10.2 x 7.6 x 2.8 inches. Use either the RCA low-level inputs or the speaker-level inputs, not both at the same time. Cerwin Vega specifies 8 AWG or heavier power and ground wire, a ground run under 39 inches, and a 16 AWG or heavier remote-turn-on lead when using remote turn-on wiring.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45619806961734,"sku":"CER-VPAS68","price":225.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UzhXmBHcL.jpg?v=1784370654"},{"product_id":"cerwin-vega-vr10-10-powered-underseat-subwoofer","title":"Cerwin Vega VR10 10\" Powered Underseat Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VR10 is a compact 10-inch active subwoofer enclosure made for adding low-frequency reinforcement without dedicating a large portion of the vehicle to a separate subwoofer box and amplifier. Its slim 12.2 x 9.0 x 3.0-inch enclosure is intended for underseat or other tight-space installations. The integrated amplifier creates a self-contained bass upgrade for compatible factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eThis model is designed for drivers who want fuller bass response while maintaining usable cargo and cabin space. It combines a 10-inch, 2-ohm subwoofer with a built-in passive radiator to extend low-frequency performance from its compact enclosure. The result is a focused bass addition suited to everyday music listening rather than a large, externally amplified enclosure installation.\u003c\/p\u003e\u003cp\u003eThe VR10 is rated for 200 watts RMS at 2 ohms and 450 watts maximum power. Its specified frequency response is 35Hz to 150Hz, with an adjustable low-pass filter covering 75Hz to 150Hz. A 0 to 12dB bass boost and 35Hz subsonic filter provide adjustment options for matching the subwoofer to the vehicle and music preferences.\u003c\/p\u003e\u003cp\u003eFor system integration, the VR10 provides both RCA low-level and high-level signal inputs. This allows it to connect with many aftermarket receivers as well as systems that use speaker-level outputs. Adjustable input sensitivity, delayed soft remote turn-on, and thermal-protection circuitry support practical installation and daily operation.\u003c\/p\u003e\u003cp\u003eA wired remote subwoofer control and remote bass knob are included for convenient level adjustment from the front of the vehicle. The amplifier is integrated into a cast-aluminum heat-sink structure, helping manage heat in the compact design. The VR10 can serve as a straightforward standalone bass upgrade without requiring a separate external subwoofer amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Active Subwoofer:\u003c\/strong\u003e Combines the subwoofer, enclosure, and amplifier in one compact unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Delivers 200 watts RMS at 2 ohms and 100Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Passive Radiator:\u003c\/strong\u003e Supports extended bass response from the slim enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports connection to many factory and aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets you set the bass blend from 75Hz to 150Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Provides convenient adjustment of subwoofer level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VR10 uses a slim enclosure format measuring 12.2 x 9.0 x 3.0 inches. Its integrated amplifier is housed with a cast-aluminum heat-sink design, while a built-in passive radiator supports the enclosure's low-frequency performance. PWM MOSFET power-supply design and a thermal-protection circuit are specified for the powered system.\u003c\/p\u003e\u003cp\u003eConfirm available clearance before mounting under a seat or in another compact location, including space for wiring and ventilation. Connect the unit using either its RCA low-level inputs or high-level inputs, then use the adjustable input sensitivity, low-pass filter, bass boost, and included remote level control to blend output with the rest of the audio system. Professional installation is recommended when vehicle power, ground, remote-turn-on, or factory-system integration is required.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45619997704262,"sku":"CER-VR10","price":432.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51l3Ko8fHML.jpg?v=1784370747"},{"product_id":"cerwin-vega-xe12dv-dual-12-loaded-vented-enclosure","title":"Cerwin-Vega XE12DV Dual 12\" Loaded Vented Enclosure","description":"\u003cp\u003eThe Cerwin-Vega XE12DV is a loaded car-audio subwoofer enclosure designed to add low-frequency output without requiring you to choose and build a separate subwoofer box. It combines two 12-inch XED Series subwoofers in a factory-tuned vented enclosure. This makes it a practical option for vehicle owners seeking a ready-to-install bass upgrade.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for use with an external car-audio amplifier and is specified with a 2-ohm nominal impedance. Its 450-watt RMS power rating gives shoppers a useful target when selecting an amplifier. The XE12DV is suited to systems where strong bass presence is desired while retaining a straightforward enclosure-based installation.\u003c\/p\u003e\u003cp\u003eThe vented cabinet design is engineered to support efficient low-frequency performance from the dual subwoofers. With a listed frequency response of 20 Hz to 500 Hz, it is intended to cover the bass range rather than reproduce full-range audio. It can complement factory or aftermarket speakers by handling the low-end portion of the system.\u003c\/p\u003e\u003cp\u003eEach loaded subwoofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, ferrite magnet, and dual voice coils. These materials form the core of the XED Series woofer design used in this enclosure. The cabinet is built from 3\/4-inch MDF and finished in black carpet for a conventional trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eThe XE12DV provides a single spring-post terminal connection for the enclosure. Cerwin-Vega's installation guide recommends an amplifier rated from 250 to 500 watts RMS and a minimum of 16-gauge speaker wire, with 14-gauge preferred. Secure mounting is important so the enclosure remains stable during operation in a vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Subwoofers:\u003c\/strong\u003e Two preloaded XED Series woofers provide a complete bass enclosure solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e450W RMS Handling:\u003c\/strong\u003e Supports amplifier matching within the manufacturer's recommended 250 to 500 watt RMS range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Load:\u003c\/strong\u003e Designed for connection to a compatible 2-ohm-stable car-audio amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Enclosure:\u003c\/strong\u003e The factory-tuned ported cabinet supports low-frequency output and airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMDF Cabinet Construction:\u003c\/strong\u003e A 3\/4-inch medium-density fiberboard enclosure provides a solid mounting structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring-Post Terminal:\u003c\/strong\u003e A single enclosure terminal offers a straightforward speaker-wire connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XE12DV uses a hatchback-style enclosure with an angled back, black carpet exterior, and factory-embroidered Cerwin-Vega branding. Its loaded woofers use polypropylene cones, treated-foam surrounds, stamped-steel baskets, and ferrite magnets. Mesh grilles are included to help protect the front of the subwoofers.\u003c\/p\u003e\u003cp\u003ePlace the enclosure in a suitable trunk or cargo area and secure it before use, as recommended in the installation guide. Connect the spring-post terminal to an external amplifier with correct polarity, using at least 16-gauge wire; 14-gauge wire is preferred. Match the amplifier carefully to the enclosure's 2-ohm nominal impedance and 450-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45620439941190,"sku":"CER-XE12DV","price":338.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61SDxwzlQdL.jpg?v=1784370943"},{"product_id":"gravity-g12bd1-12-powered-subwoofer-enclosure","title":"Gravity G12BD1 12\" Powered Subwoofer Enclosure","description":"\u003cp\u003eThe Gravity G12BD1 is a loaded 12-inch car subwoofer enclosure designed to add dedicated low-frequency output to a vehicle audio system. It combines a pre-mounted Warzone Series subwoofer with a vented enclosure, providing a space-conscious way to add bass without building a custom box. Product listings describe an integrated amplifier for an all-in-one installation approach.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for drivers who want stronger bass response than factory full-range speakers can provide. Its ported enclosure design is tuned to reinforce low frequencies and give bass notes more presence. The 4-ohm final load also makes system matching more straightforward when planning the rest of the audio system.\u003c\/p\u003e\u003cp\u003eThe G12BD1 is rated for 500 watts RMS and 1,000 watts peak power. The enclosure provides 2.00 cubic feet of internal air space and is tuned to 38 Hz. These characteristics suit listeners seeking extended, low-frequency reinforcement from a single 12-inch enclosure.\u003c\/p\u003e\u003cp\u003eGravity uses a heavy-duty MDF enclosure construction for rigidity and durability. The loaded driver is pre-installed and wired to its final 4-ohm impedance, reducing the work involved compared with sourcing a separate subwoofer and enclosure. Its black finish is designed to integrate neatly in a trunk or cargo area.\u003c\/p\u003e\u003cp\u003eBefore purchase, measure the intended mounting location and plan for secure installation. The published enclosure dimensions are 20 x 17 x 17.5 inches, so it is best suited to vehicles with adequate trunk or cargo space. Verify the amplifier configuration, power wiring requirements, and included accessories with the selling dealer before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated bass output from one loaded driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports continuous-power system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W Peak Rating:\u003c\/strong\u003e Indicates short-term maximum power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Final Load:\u003c\/strong\u003e Simplifies amplifier and wiring compatibility planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Enclosure:\u003c\/strong\u003e Uses a ported design tuned for low-frequency reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Loaded MDF Box:\u003c\/strong\u003e Reduces the need to build and wire a separate enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G12BD1 uses a black, heavy-duty MDF wedge-style enclosure with a vented design. Its 2.00-cubic-foot air space and 38 Hz tuning are part of the assembled enclosure package. The subwoofer is pre-loaded and pre-wired at a 4-ohm final impedance.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a dry, secure trunk or cargo-area location where it cannot move while driving. Confirm that the 20 x 17 x 17.5-inch enclosure will fit before ordering, and allow suitable clearance for any amplifier section and wiring connections. Product listings identify the unit as powered, but the published amplifier electrical details and wiring-kit contents should be verified with the dealer.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625793413190,"sku":"G12BD1","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81lbzd6LJYL.jpg?v=1784374288"},{"product_id":"gravity-g12bd2-dual-12-ported-loaded-subwoofer-enclosure","title":"Gravity G12BD2 Dual 12\" Ported Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe Gravity G12BD2 is a dual 12-inch loaded car-subwoofer enclosure designed to add low-frequency output to a vehicle audio system without building a custom box. Its two subwoofers are pre-installed in a ported enclosure and wired to an 8-ohm final load. This makes it a practical option for installers seeking a ready-made enclosure format.\u003c\/p\u003e\u003cp\u003eThe enclosure is rated for 800 watts RMS and 1,600 watts peak power handling. Its published frequency-response range is 30 Hz to 1.5 kHz, with the ported enclosure tuned to 30 Hz. The design is intended to emphasize low-bass reproduction in a trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eGravity identifies the G12BD2 as part of its Warzone Series. The system uses two 12-inch drivers in a vented, wedge-style enclosure with 4.00 cubic feet of stated air space. The pre-wired 8-ohm configuration helps define the amplifier load that the rest of the system must support.\u003c\/p\u003e\u003cp\u003eThe enclosure uses heavy-duty MDF construction, giving the assembled unit a rigid cabinet structure for its installed drivers. At 34.5 inches wide, 19.5 inches high, and 18.75 inches deep, it is suited to vehicles with sufficient cargo-space clearance. Measure the intended location and account for space around the enclosure before purchase.\u003c\/p\u003e\u003cp\u003eOnline listings describe the G12BD2 inconsistently as both a loaded enclosure and an active powered enclosure. The confirmed technical details specify pre-loaded subwoofers and an 8-ohm final impedance, but do not publish amplifier specifications. Confirm the supplied amplification configuration and connection requirements with the retailer before planning the wiring installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Configuration:\u003c\/strong\u003e Uses two pre-installed 12-inch subwoofers in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Rating:\u003c\/strong\u003e Supports up to 800 watts RMS power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,600W Peak Rating:\u003c\/strong\u003e Provides a published 1,600-watt peak power-handling rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Ohm Final Load:\u003c\/strong\u003e Pre-wired enclosure presents an 8-ohm final impedance load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Cabinet:\u003c\/strong\u003e Vented enclosure is tuned to 30 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty MDF:\u003c\/strong\u003e MDF enclosure construction provides a durable cabinet foundation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G12BD2 uses a wedge-style, ported enclosure made from heavy-duty MDF. Its stated internal air space is 4.00 cubic feet, and the ported layout is tuned to 30 Hz. The two subwoofers arrive pre-loaded in the enclosure and are listed with single voice coils.\u003c\/p\u003e\u003cp\u003ePlan installation around the enclosure's 34.5 x 19.5 x 18.75-inch dimensions and confirm that the vehicle has adequate cargo-area clearance. Match the system to the enclosure's stated 8-ohm final load and 800-watt RMS rating. Because published listings conflict on whether amplification is integrated, verify the exact package contents, wiring requirements, and required accessories with the selling retailer before installation.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625883263046,"sku":"G12BD2","price":338.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81bTHYUi_uL.jpg?v=1784374334"},{"product_id":"gravity-g8bd2-dual-8-powered-ported-subwoofer-enclosure","title":"Gravity G8BD2 Dual 8\" Powered Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Gravity G8BD2 is a self-powered car subwoofer enclosure designed to add low-frequency output without requiring a separate external amplifier. It combines two 8-inch subwoofers, an integrated amplifier, and a ported enclosure in one assembled package. This approach can simplify a bass upgrade for vehicles where adding multiple separate components is less practical.\u003c\/p\u003e\u003cp\u003eRated at 600 watts RMS and 1,200 watts maximum power, the G8BD2 is intended for listeners seeking a more substantial bass foundation from a compact dual-subwoofer layout. Its listed 30 Hz to 1 kHz frequency response covers the low-frequency range commonly handled by a vehicle subwoofer system. The powered design keeps amplification and enclosure components together.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a ported configuration, which uses an opening in the cabinet to support low-frequency output. This design is paired with a listed enclosure air space of 3.5 cubic feet. The G8BD2 is specified as an enclosed powered subwoofer system for car-audio use.\u003c\/p\u003e\u003cp\u003eHeavy-duty MDF construction provides the enclosure structure for the dual-driver assembly. The cabinet measures 26.75 inches wide by 17 inches high by 14 inches deep, so measuring the intended cargo-area location before purchase is important. The listed product weight is 40 pounds.\u003c\/p\u003e\u003cp\u003eThe G8BD2 can be used with an existing car stereo as part of a complete vehicle-audio upgrade. Because it is an active enclosure, it still requires proper vehicle power, ground, turn-on, and audio-signal connections during installation. Confirm the available mounting space and have the installation planned around the vehicle's electrical and audio-system configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch Drivers:\u003c\/strong\u003e Two compact subwoofers are built into one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplification:\u003c\/strong\u003e The enclosure is an active, powered subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Rating:\u003c\/strong\u003e Provides the listed continuous power rating for the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W Maximum Power:\u003c\/strong\u003e Provides the listed maximum power-handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Cabinet:\u003c\/strong\u003e Uses a vented enclosure design for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty MDF Construction:\u003c\/strong\u003e Provides a rigid cabinet structure for the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G8BD2 combines two 8-inch subwoofers and integrated amplification in a heavy-duty MDF ported enclosure. Its listed cabinet dimensions are 26.75 x 17 x 14 inches, with a listed weight of 40 pounds. The system is specified with a single voice coil and 8-ohm DC resistance.\u003c\/p\u003e\u003cp\u003ePlan installation in a secure, ventilated vehicle location that accommodates the enclosure's full dimensions and allows access for wiring. A proper installation requires vehicle power, ground, remote turn-on, and an audio signal connection; the exact included accessories and connection types are not confirmed. Professional installation is advisable when vehicle wiring, signal integration, or secure mounting is needed.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626620543046,"sku":"G8BD2","price":225.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/pixelcut-export_c3e82955-da5b-4be6-b4cc-42b4a39105bc.png?v=1784374924"},{"product_id":"hertz-dbx25-3-10-car-subwoofer-enclosure","title":"Hertz DBX25-3 10\" Car Subwoofer Enclosure","description":"\u003cp\u003eThe Hertz DBX25-3 is a complete 10-inch car subwoofer enclosure designed to add low-frequency output to an existing vehicle audio system. It provides a practical way to introduce bass without designing and building a separate enclosure. The 4-ohm passive configuration is intended for connection to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis subwoofer box is suited to listeners who want fuller bass response from factory or aftermarket speakers while keeping the installation relatively contained. Its 32-400 Hz frequency-response specification supports use as the low-frequency portion of a multi-speaker car audio system. With 150 W continuous power handling and 600 W peak power handling, it should be matched carefully with an amplifier and correctly configured crossover.\u003c\/p\u003e\u003cp\u003eThe DBX25-3 uses a 250 mm (10-inch) subwoofer with a polypropylene cone reinforced with mica injection. Its high-excursion butyl rubber surround and ribbed cone surface support controlled cone movement and rigidity. The result is a bass-focused driver built for integration in a dedicated enclosure.\u003c\/p\u003e\u003cp\u003eA high-density-flux ferrite magnet and 38 mm voice coil are part of the driver design. The enclosure uses a very thick MDF cabinet to provide a rigid mounting structure for the subwoofer. Its angled rear wall is designed to reduce rear-wave reflections while helping the enclosure fit more easily in vehicle cargo areas.\u003c\/p\u003e\u003cp\u003eThe DBX25-3 can serve as a compact bass upgrade alongside full-range door speakers, component speakers, or an aftermarket head unit. Its plated high-current terminals provide the connection point for speaker wire from the amplifier. Secure mounting, sensible gain adjustment, and a low-pass crossover are important for reliable system integration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated low-frequency output to a vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Connects to an amplifier rated for a 4-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 W Continuous Handling:\u003c\/strong\u003e Supports amplifier matching for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Mica Cone:\u003c\/strong\u003e Uses a stiffened cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick MDF Enclosure:\u003c\/strong\u003e Provides a rigid cabinet structure for the installed driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled Rear Panel:\u003c\/strong\u003e Helps placement while reducing rear-wave reflections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DBX25-3 combines a polypropylene cone with mica injection, a high-excursion butyl rubber surround, and a high-density-flux ferrite magnet. Its enclosure is constructed from thick MDF and uses an angled rear panel. The cabinet includes plated high-current terminals for the speaker-level connection from an external amplifier.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure location where it cannot shift during driving and where it does not interfere with vehicle equipment. Connect it only to an amplifier that is stable at 4 ohms, then set amplifier gain and low-pass filtering appropriately for the rest of the system. Use appropriately sized, protected speaker cable and keep wiring clear of sharp edges, moving parts, moisture, and heat sources.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631724159046,"sku":"DBX25-3","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81b9Frkm3qL.jpg?v=1784379782"},{"product_id":"hertz-dbx-30-3-12-4-ohm-subwoofer-enclosure","title":"Hertz DBX 30.3 12\" 4-Ohm Subwoofer Enclosure","description":"\u003cp\u003eThe Hertz DBX 30.3 is a passive 12-inch subwoofer enclosure designed to add low-frequency output to a car audio system without requiring a custom-built box. Its factory enclosure helps simplify a bass upgrade where available trunk or cargo space is limited. It is intended for use with an external amplifier matched appropriately to its 4-ohm load and 250-watt continuous power rating.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want a dedicated bass channel to support full-range door speakers or a factory head unit with added amplification. The 12-inch driver is designed for bass reproduction from 28 to 300 Hz, covering deep low-end content as well as upper-bass impact. With a rated sensitivity of 91 dB SPL, it can be integrated into systems that prioritize efficient output from moderate amplifier power.\u003c\/p\u003e\u003cp\u003eThe DBX 30.3 uses a polypropylene cone with mica injection, a material combination selected for a rigid diaphragm structure. Its cone also features deep surface ribbing to increase rigidity, while the butyl-rubber surround supports driver excursion. A high-density-flux ferrite magnet and 1.5-inch voice coil form the motor system behind the enclosed driver.\u003c\/p\u003e\u003cp\u003eHertz builds the enclosure from thick MDF to provide a rigid cabinet structure for the installed subwoofer. The rear panel is angled to help reduce internal back-wave reflections and to make placement easier in a vehicle. High-current plated terminals provide the connection point for speaker wire from an external amplifier.\u003c\/p\u003e\u003cp\u003eAt 19 inches wide, 8.9 inches deep, and 13.5 inches high, the DBX 30.3 offers a compact factory-enclosure format for a 12-inch subwoofer. It can serve as the bass foundation in an entry-level or moderate-power upgrade system. Pair it with a stable amplifier that delivers power suitable for a 4-ohm, 250-watt continuous subwoofer load, then set crossover and gain controls carefully during installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated low-frequency reinforcement in a prebuilt enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250-Watt Continuous Rating:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifiers rated for a 4-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Mica Cone:\u003c\/strong\u003e Combines a rigid cone structure with mineral reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick MDF Cabinet:\u003c\/strong\u003e Creates a rigid enclosure structure for the installed driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled Rear Panel:\u003c\/strong\u003e Helps fit the enclosure against vehicle interior contours.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DBX 30.3 combines a thick MDF cabinet with an angled rear wall and a high-density-flux ferrite motor. Its polypropylene cone with mica injection, deep cone ribbing, and high-excursion butyl-rubber surround are designed as part of the installed driver system. The enclosure uses high-current plated terminals for its speaker-level connection from an amplifier.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely on a stable vehicle surface so it cannot move during driving, and leave room around the terminal area for wiring. Connect it to an external amplifier that is compatible with a 4-ohm load and configured for the subwoofer's 250-watt continuous rating. Use the amplifier's low-pass crossover and gain settings to blend the enclosure with the vehicle's main speakers rather than using it as a full-range speaker.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631724191814,"sku":"DBX30-3","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71D0WVWBqaL.jpg?v=1784379824"},{"product_id":"hertz-mpbx-250-s2-10-sealed-loaded-subwoofer-enclosure","title":"Hertz MPBX 250 S2 10\" Sealed Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe Hertz MPBX 250 S2 is a loaded 10-inch passive subwoofer enclosure designed for vehicle systems that need meaningful bass output without requiring a large box. Its sealed, ultra-shallow enclosure format helps it fit where conventional subwoofer enclosures may be impractical. It is built around the 2-ohm MPS 250 S2 shallow subwoofer platform.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners building a compact amplified subwoofer system in cars, trucks, and other vehicles with limited installation height. With 500 watts continuous power handling and a 2-ohm nominal impedance, it should be paired with an amplifier that is stable at 2 ohms and appropriately power-matched. Its specified frequency response is 25 to 400 Hz.\u003c\/p\u003e\u003cp\u003eThe MPBX 250 S2 uses a sealed cabinet to provide a controlled bass foundation in a compact footprint. Hertz specifies a polypropylene cone, a single 38 mm voice coil, and a high-density flux ferrite magnet in the loaded subwoofer. The shallow enclosure measures 160 mm deep externally, helping accommodate under-seat and other low-clearance applications.\u003c\/p\u003e\u003cp\u003eIts enclosure construction uses 15 mm wood panels, panel-to-panel internal bracing, solid corners, and internal sound-absorbing material. These elements are designed to limit cabinet resonances while supporting the enclosed driver. Rounded cabinet corners also make placement easier in tighter vehicle spaces.\u003c\/p\u003e\u003cp\u003eHertz 2S² (2 Sides\/2 Sounds) design supports either up-firing or down-firing placement. The supplied leveling feet use hook-and-loop inserts for down-firing installation, while the SSP Sub Smart Plug system provides a removable Plug-\u0026amp;-Play terminal block alongside traditional push terminals. A screw-less mesh grille is included to help protect the driver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Enclosure:\u003c\/strong\u003e A 160 mm external depth supports installations with limited available height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Continuous Handling:\u003c\/strong\u003e Supports amplifier matching for substantial low-frequency system output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Loaded Design:\u003c\/strong\u003e Uses a single 2-ohm shallow 10-inch subwoofer configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation Options:\u003c\/strong\u003e Allows up-firing or down-firing placement to suit the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Wood Cabinet:\u003c\/strong\u003e 15 mm wood panels and internal bracing help control enclosure resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSP Connection System:\u003c\/strong\u003e Combines a removable Plug-\u0026amp;-Play block with traditional push terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPBX 250 S2 combines a polypropylene-cone subwoofer with a high-density flux ferrite magnet in a rigid sealed box. Its cabinet includes 15 mm wood construction, internal sound-absorbing material, panel-to-panel bracing, solid corners, and rounded exterior corners. The included mesh grille has an adjustable logo position for installation orientation.\u003c\/p\u003e\u003cp\u003eMeasure the available space before installation using the 531 x 160 x 361 mm overall dimensions. For down-firing use, install the supplied leveling feet with their hook-and-loop inserts on a suitable carpeted surface; up-firing can be used when that placement better suits the system. Connect the enclosure to a compatible 2-ohm-stable subwoofer amplifier using either the SSP Plug-\u0026amp;-Play terminal block or the conventional push terminals, and secure the enclosure so it cannot move while driving.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631786057798,"sku":"MPBX250S2-1","price":707.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81gf7kAFBPL.jpg?v=1784382818"},{"product_id":"jbl-club1000d-dual-10-ported-subwoofer-enclosure","title":"JBL CLUB1000D Dual 10\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe JBL CLUB1000D is a loaded, ported car subwoofer enclosure with two 10-inch polypropylene drivers. It is designed for vehicle audio systems that need added low-frequency output without separately selecting subwoofers and building a box. Its 2-ohm nominal impedance makes it intended for use with a compatible external car amplifier.\u003c\/p\u003e\u003cp\u003eWith 700 watts RMS and 1,400 watts peak power handling, the CLUB1000D is suited to bass-focused upgrades in cars, trucks, and SUVs with sufficient cargo-space clearance. The enclosure’s specified frequency response extends from 30Hz to 400Hz at -6dB. JBL rates sensitivity at 86dB measured at 1W\/1m.\u003c\/p\u003e\u003cp\u003eThe enclosure uses JBL Slipstream Port Technology, a double-flared port design intended to reduce air turbulence in the port. This design helps limit port noise and distortion associated with moving air through a conventional port. It is a practical choice for listeners seeking a ported enclosure character with strong low-end presence.\u003c\/p\u003e\u003cp\u003eIts wedge-shaped cabinet and rounded-corner design allow flexibility when positioning the enclosure in a trunk or cargo area. The cabinet measures 26 inches wide and uses two different depths, helping it fit against angled seating or cargo-area surfaces. A removable JBL logo badge lets the visible branding be positioned to suit the installation.\u003c\/p\u003e\u003cp\u003eThe CLUB1000D can be integrated into a system with an aftermarket amplifier, wiring, and source unit. JBL specifies at least 10 AWG speaker wire for connections to this dual-subwoofer enclosure. Secure mounting in a trunk or cargo-area corner helps keep the enclosure stable while preserving usable vehicle space.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Drivers:\u003c\/strong\u003e Two polypropylene subwoofers provide a ready-to-install bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W RMS Handling:\u003c\/strong\u003e Supports substantial continuous power from a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Load:\u003c\/strong\u003e Designed for an amplifier stable at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlipstream Port Technology:\u003c\/strong\u003e Double-flared port design helps reduce turbulence and port noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedge Cabinet Shape:\u003c\/strong\u003e Supports flexible placement in trunks and cargo areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Lets you choose the JBL badge placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CLUB1000D uses a 13\/16-inch (21mm) MDF enclosure with a black carpet covering. Its wedge-box profile incorporates rounded corners and a ported design, while the two 10-inch drivers use polypropylene cones. The black finish is suited to a traditional trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eConnect the enclosure’s positive and negative terminals to a compatible amplifier while observing correct polarity. JBL specifies a minimum 10 AWG (5mm²) speaker wire for the CLUB1000D, and recommends securing the enclosure to its mounting surface in a trunk or cargo-area location that does not interfere with cargo, folding rear seats, or the trunk lid. Confirm available clearance using its 26-inch width, 17-inch maximum depth, and 14-1\/8-inch height before installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632217317446,"sku":"JBLSUBCB1000D","price":494.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/615c8a7HmiL.jpg?v=1784398397"},{"product_id":"jbl-club1000p-10-ported-subwoofer-enclosure","title":"JBL CLUB1000P 10\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe JBL CLUB1000P is a loaded, ported car subwoofer enclosure built around one 10-inch polypropylene driver. It provides a ready-made bass upgrade for vehicles where adding a separate enclosure and subwoofer is not preferred. The enclosure presents a 2-ohm nominal load and is designed for use with an external car audio amplifier.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners who want added low-frequency extension in a compact wedge-style enclosure. Its rated frequency response is 35Hz to 400Hz at -6dB, giving it a range intended for bass reinforcement rather than full-range playback. JBL rates the CLUB1000P at 350 watts RMS and 1,050 watts peak power handling.\u003c\/p\u003e\u003cp\u003eThe CLUB1000P uses JBL Slipstream Port Technology, a double-flared port design intended to reduce air turbulence inside the port. Reducing turbulence helps limit audible port noise during bass playback. This design supports the use of a compact ported enclosure while maintaining low-frequency output.\u003c\/p\u003e\u003cp\u003eA wedge enclosure profile with rounded corners allows flexible placement in a trunk or cargo area. The angled cabinet shape can make it easier to position the enclosure around available vehicle space. A removable JBL logo badge lets the visible branding be oriented to suit the selected placement.\u003c\/p\u003e\u003cp\u003eThe enclosure uses 18mm MDF construction with a black carpet covering for an integrated automotive appearance. It connects directly to an amplifier's speaker outputs using the enclosure's positive and negative terminals. For a complete system, pair it with a properly configured amplifier and suitable power, ground, signal, and speaker wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 10-Inch Enclosure:\u003c\/strong\u003e Includes one installed 10-inch polypropylene subwoofer driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for substantial bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for an amplifier stable at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlipstream Port Technology:\u003c\/strong\u003e Double-flared port design helps reduce air turbulence and port noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedge Cabinet Profile:\u003c\/strong\u003e Rounded-corner shape supports flexible trunk or cargo-area positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Allows the JBL badge to be positioned for the installation layout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CLUB1000P enclosure is constructed from 11\/16-inch (18mm) MDF and finished in black carpet. Its wedge-shaped cabinet measures 17-5\/8 inches wide by 14-15\/16 inches high, with shallow and deep depths of 10-7\/16 and 13-5\/8 inches. The installed driver uses a 2-inch voice coil and a polypropylene cone.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a location that does not interfere with cargo, folding rear seats, or the trunk lid; a trunk or cargo-area corner is commonly suitable. Connect its positive and negative terminals to an amplifier while observing polarity, and use at least 11 AWG (4mm²) speaker wire. JBL recommends professional installation when the required tools or vehicle-specific installation experience are not available.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632221806662,"sku":"JBLSUBCB1000P","price":340.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ulb3nNJdL.jpg?v=1784398444"},{"product_id":"jbl-jblsubcb1000ssl-10-shallow-loaded-subwoofer-enclosure","title":"JBL JBLSUBCB1000SSL 10\" Shallow Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe JBL Club 1000SSL is a compact loaded subwoofer enclosure designed to add low-frequency output where vehicle space is limited. It combines a single 10-inch shallow aluminum driver with an integrated passive radiator in a prebuilt enclosure. This makes it a practical option for drivers who want a finished bass solution rather than sourcing a separate subwoofer and box.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a sealed, down-firing layout intended to deliver controlled bass response while keeping the cabinet profile low. Its specified frequency response is 35Hz to 400Hz at -6dB, supporting sub-bass and upper-bass reinforcement in a car audio system. With a 2-ohm nominal impedance, it is designed to connect to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThe Club 1000SSL is rated to handle 350 watts RMS and 1,050 watts peak. Its 82.5dB sensitivity rating is measured at 1W\/1m, and it uses a 2-inch voice coil. These specifications provide clear amplifier-matching reference points when planning a system upgrade.\u003c\/p\u003e\u003cp\u003eJBL builds the enclosure from 3\/4-inch MDF and covers it in black carpet for everyday vehicle use. The cabinet measures only 4-1\/2 inches high, helping it fit in locations where a conventional subwoofer box may be impractical. A down-firing driver arrangement helps keep the woofer integrated into the enclosure design.\u003c\/p\u003e\u003cp\u003eRemovable feet allow the enclosure to be positioned in different orientations to suit available cargo-area space. The included removable JBL logo badge can be installed where desired, while the supplied steel plates and hardware support secure mounting. Use the Club 1000SSL as the bass section of an amplified car audio system with an amplifier that is appropriate for its 2-ohm load and power-handling rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Aluminum Driver:\u003c\/strong\u003e A shallow 250mm subwoofer is preinstalled in the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDown-Firing Sealed Design:\u003c\/strong\u003e Keeps the driver facing downward in a compact sealed cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Passive Radiator:\u003c\/strong\u003e Works with the enclosure design to support low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Provides a clear continuous-power target for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Feet:\u003c\/strong\u003e Allow flexible enclosure orientation for available vehicle space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Lets you choose where to place the JBL branding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 1000SSL uses 3\/4-inch (18mm) MDF construction with a rugged black carpet covering. Its shallow cabinet measures 24-7\/8 inches wide, 4-1\/2 inches high, and 13-1\/8 inches deep. The enclosure includes a down-firing subwoofer, passive radiator, removable feet, removable badge, and supplied mounting hardware.\u003c\/p\u003e\u003cp\u003eConnect the enclosure's positive and negative terminals to an external amplifier while observing correct polarity. JBL specifies at least 4mm² (11 AWG) speaker wire for the enclosure connection, and the enclosure should be securely mounted where it will not obstruct cargo, folding seats, or the trunk lid. Confirm adequate clearance and avoid routing hardware or wiring near vehicle brake lines, fuel lines, or wiring harnesses.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632227606598,"sku":"JBLSUBCB1000SSL","price":460.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71s2OBp8zML.jpg?v=1784398494"},{"product_id":"jbl-jblsubcb1200d-dual-12-ported-subwoofer-enclosure","title":"JBL JBLSUBCB1200D Dual 12\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe JBL JBLSUBCB1200D is a loaded, ported car subwoofer enclosure built around two 12-inch JBL Club polypropylene drivers. It provides a ready-made bass foundation for vehicle audio systems that need more low-frequency output without designing and building a custom enclosure. With a final nominal impedance of 2 ohms and 800 watts RMS power handling, it is intended for use with a properly matched external subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis dual-subwoofer enclosure is designed for listeners who want a substantial bass upgrade in a vehicle with adequate cargo space. Its 30 Hz to 400 Hz frequency response specification supports deep bass reproduction while allowing the enclosure to integrate with a system's main speakers through appropriate amplifier crossover settings. The 89 dB sensitivity rating helps describe its output efficiency when measured at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eJBL's Slipstream Port Technology uses a double-flared port design intended to reduce turbulence inside the port. Reducing turbulence helps limit port noise and distortion that can occur in compact ported enclosures. The result is a cleaner ported-bass presentation when the enclosure is powered and tuned appropriately.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a wedge-box profile with rounded corners, allowing flexibility when positioning it in a trunk or cargo area. This shape can help make better use of available vehicle space while giving installers options for enclosure orientation. The black carpet finish provides a traditional car-audio appearance that coordinates easily with many interiors.\u003c\/p\u003e\u003cp\u003eFor a complete bass system, pair the Club 1200D with an external amplifier that is stable at its 2-ohm nominal load and whose output is matched thoughtfully to the enclosure's 800-watt RMS rating. An amplifier installation kit, power wiring, signal connection, and secure vehicle mounting are also required but are not listed as included. A removable JBL logo badge lets the finished installation retain a cleaner or more customized look.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Drivers:\u003c\/strong\u003e Two 300 mm polypropylene drivers provide a preloaded bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Handling:\u003c\/strong\u003e Supports substantial continuous amplifier power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Load:\u003c\/strong\u003e Designed for a compatible external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlipstream Port Technology:\u003c\/strong\u003e Double-flared port design helps reduce turbulence and port noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedge Enclosure Profile:\u003c\/strong\u003e Offers flexible placement options in vehicle cargo areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable JBL Badge:\u003c\/strong\u003e Lets you choose the logo placement or remove it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 1200D uses a 13\/16-inch (21 mm) MDF enclosure with a black carpet covering. Its wedge-box shape and rounded corners are designed for flexible placement, while the ported layout incorporates JBL Slipstream Port Technology. The enclosure contains two 12-inch polypropylene drivers and measures 32-1\/16 inches wide by 15-1\/16 inches high, with 14-1\/16-inch and 17-1\/8-inch depth measurements.\u003c\/p\u003e\u003cp\u003eConfirm available cargo-area clearance before purchase, accounting for the enclosure's width, height, and wedge depth. Connect it only to an external amplifier compatible with a 2-ohm nominal speaker load, and set amplifier gain and crossover controls carefully for the system. Secure the enclosure to prevent movement during driving, and follow the included owner's manual or use a qualified car-audio installer for vehicle-specific installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632276430918,"sku":"JBLSUBCB1200D","price":596.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61a6-EEW-3L.jpg?v=1784398957"},{"product_id":"jbl-club-1200ssl-12-shallow-loaded-subwoofer-enclosure","title":"JBL Club 1200SSL 12\" Shallow Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe JBL Club 1200SSL is a loaded 12-inch shallow subwoofer enclosure designed to add low-frequency output where cargo space is limited. Its low-profile enclosure is suited to vehicle installations that cannot accommodate a conventional full-depth subwoofer box. The enclosure comes loaded and ready to connect to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis model uses a down-firing sealed enclosure design with a passive radiator and a 12-inch aluminum driver. JBL rates it at 400 watts RMS and 1,200 watts peak power handling at a nominal 2-ohm impedance. The specified frequency response is 30Hz to 400Hz at -6dB.\u003c\/p\u003e\u003cp\u003eThe down-firing arrangement places the active subwoofer beneath the enclosure, helping protect the driver in everyday cargo-area use. A passive radiator supports bass performance without requiring a large ported enclosure. This approach is intended for listeners who want a compact bass upgrade with controlled, accurate low-frequency reproduction.\u003c\/p\u003e\u003cp\u003eWith a height of just 4-7\/8 inches, the Club 1200SSL can work in space-conscious vehicle layouts. Removable feet allow the enclosure to be positioned for the available space and preferred orientation. The removable JBL logo badge also gives installers flexibility in how the enclosure is presented after installation.\u003c\/p\u003e\u003cp\u003eThe Club 1200SSL is a passive subwoofer enclosure, so it should be paired with an amplifier that is compatible with its 2-ohm nominal load and 400-watt RMS rating. It can be used as the bass foundation in an aftermarket audio system alongside a factory or aftermarket head unit and appropriate amplifier integration. JBL specifies at least 4 mm² (11 AWG) speaker wire for connections to the enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Aluminum Driver:\u003c\/strong\u003e Provides a purpose-built low-frequency driver in a compact loaded enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous 400-watt RMS rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDown-Firing Sealed Design:\u003c\/strong\u003e Places the active driver under the enclosure for a protected, space-conscious layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Radiator:\u003c\/strong\u003e Supports bass output without the space requirements of a conventional port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Feet:\u003c\/strong\u003e Allow flexible placement direction to suit available vehicle space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Lets installers position the JBL badge where it suits the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is built from 3\/4-inch (18mm) medium-density fiberboard with a rugged black carpet covering. Its shallow cabinet measures 27-5\/8 inches wide, 14-5\/8 inches deep, and 4-7\/8 inches high. The down-firing layout, removable feet, and removable logo badge support a clean, adaptable installation.\u003c\/p\u003e\u003cp\u003eConnect the enclosure's positive and negative terminals to the speaker outputs of a compatible amplifier, observing correct polarity. JBL specifies speaker wire of at least 4 mm² (11 AWG) for enclosure connections. Secure the enclosure to a suitable mounting surface in a cargo or trunk area that does not interfere with cargo, fold-down seats, or trunk-lid operation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632281247814,"sku":"JBLSUBCB1200SSL","price":524.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81nl61SocEL.jpg?v=1784399002"},{"product_id":"jbl-stage-1200d-dual-12-ported-subwoofer-enclosure","title":"JBL Stage 1200D Dual 12\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe JBL Stage 1200D is a loaded dual 12-inch subwoofer enclosure for adding dedicated low-frequency output to a vehicle audio system. It combines two JBL Stage subwoofers in a factory-configured ported cabinet, eliminating the need to select and build a separate enclosure. It is intended for listeners who want a straightforward bass upgrade while retaining a compact enclosure profile for its class.\u003c\/p\u003e\u003cp\u003eThis enclosure is rated for 500 watts RMS and 1,000 watts peak power handling at a 2-ohm nominal impedance. Its ported, slot-vented design is engineered to improve efficiency and support strong bass output. The stated 34 Hz to 200 Hz frequency response allows it to cover deep bass while integrating with an appropriately configured full-range speaker system.\u003c\/p\u003e\u003cp\u003eTwo 12-inch JBL Stage drivers are preinstalled and wired as a single 2-ohm enclosure load. Each woofer uses a 2-inch voice coil, while the published system sensitivity is 94 dB at 2.83V\/1m. This makes the Stage 1200D a suitable match for a mono amplifier designed to operate safely at 2 ohms.\u003c\/p\u003e\u003cp\u003eThe enclosure uses 5\/8-inch MDF construction with a black carpet covering for a durable, vehicle-oriented finish. Its slot port and tapered-depth cabinet are designed to provide usable output without the bulk of many conventional dual-subwoofer boxes. The black finish also helps it blend into trunks, hatchbacks, and cargo areas.\u003c\/p\u003e\u003cp\u003eThe Stage 1200D is supplied as a complete loaded enclosure, so an external amplifier and installation wiring are still required. It can serve as the bass section of a new system or as an upgrade to a factory or aftermarket stereo when paired with the proper amplifier integration equipment. Use the amplifier's crossover controls and gain settings carefully to support clean integration with the vehicle's main speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Drivers:\u003c\/strong\u003e Two preinstalled JBL Stage subwoofers provide a complete bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports substantial continuous power with a suitable external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Load:\u003c\/strong\u003e Configured for compatible mono amplifiers rated for 2-ohm operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlot-Ported Cabinet:\u003c\/strong\u003e Ported enclosure design improves system efficiency and bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Construction:\u003c\/strong\u003e Rigid cabinet material supports dependable in-vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Efficient design helps produce strong output from amplifier power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage 1200D uses a rugged 5\/8-inch MDF enclosure covered in black carpet. Its dual-driver, slot-ported layout is housed in a cabinet measuring 30-1\/8 inches wide by 15 inches high, with 13-11\/16-inch and 10-1\/2-inch depth measurements. The enclosure contains two 12-inch drivers and is supplied ready for connection.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a suitable vehicle cargo area and connect its positive and negative terminals to a compatible external amplifier while observing polarity. JBL specifies at least 0.5 mm² (20 AWG) speaker wire for the connection to the enclosure. Choose an amplifier that is stable at the enclosure's 2-ohm nominal impedance, and use crossover and gain settings appropriate for the rest of the audio system.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632350912582,"sku":"JBLSUBST1200DAM","price":512.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/612W-R5AnHL.jpg?v=1784399497"},{"product_id":"jbl-jblsubst1200sam-12-sealed-car-subwoofer-enclosure","title":"JBL JBLSUBST1200SAM 12\" Sealed Car Subwoofer Enclosure","description":"\u003cp\u003eThe JBL Stage 1200S is a loaded, sealed car subwoofer enclosure designed to add low-frequency output without requiring a custom-built box. It combines one 12-inch subwoofer with a compact, slim-profile enclosure for vehicles where cargo-space flexibility matters. This is a practical option for listeners upgrading a factory or aftermarket audio system with dedicated bass reinforcement.\u003c\/p\u003e\u003cp\u003eThe enclosure is built around a 2-ohm 12-inch woofer rated for 250 watts RMS power handling. Its specified 34Hz-200Hz frequency response supports bass duties across a broad low-frequency range. With 91dB sensitivity measured at 2.83V\/1m, it is designed to work efficiently with an appropriately matched external amplifier.\u003c\/p\u003e\u003cp\u003eA sealed enclosure design helps keep the installation straightforward while providing a controlled bass foundation for music playback. The Stage 1200S is factory loaded and tuned, eliminating the need to select a separate box or install a loose subwoofer into an enclosure. It is suited to systems that need a complete bass enclosure rather than a component-only subwoofer.\u003c\/p\u003e\u003cp\u003eThe included Stage 122 subwoofer uses a polypropylene cone, rubber surround, and 2-inch voice coil. These components are paired with a 5\/8-inch MDF enclosure covered in black carpet. JBL also states that its car speakers undergo environmental and full-power reliability testing as part of product development.\u003c\/p\u003e\u003cp\u003eBecause this is a passive loaded enclosure, it should be connected to a compatible external subwoofer amplifier and installed securely in the vehicle. Its 2-ohm nominal impedance should be matched to an amplifier that is rated to operate at 2 ohms. The compact enclosure format makes it a sensible addition to a system with an aftermarket radio, factory radio integration, or an existing amplifier upgrade plan.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes one preinstalled JBL Stage 122 subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Cabinet Design:\u003c\/strong\u003e Provides a ready-to-install bass enclosure format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Handling:\u003c\/strong\u003e Supports properly matched external amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Impedance:\u003c\/strong\u003e Designed for compatible 2-ohm-stable subwoofer amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e91dB Sensitivity:\u003c\/strong\u003e Helps convert amplifier power into usable output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim MDF Construction:\u003c\/strong\u003e Fits more easily than many conventional enclosures.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage 1200S uses a 5\/8-inch MDF enclosure with a black carpet covering and a sealed cabinet configuration. Its loaded 12-inch driver has a polypropylene cone, rubber surround, and 2-inch voice coil. The enclosure measures 17.25 inches wide by 14.5 inches high, with 11.5-inch and 7.75-inch depth measurements.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure location with sufficient clearance for its dimensions and wire routing. It requires an external amplifier capable of driving a 2-ohm load; set amplifier gain and crossover controls appropriately for the system rather than using gain as a volume control. The package includes the enclosure, an owner's manual, and two JBL brand stickers, but no amplifier or amplifier wiring kit is listed.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632357531718,"sku":"JBLSUBST1200SAM","price":288.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61yPpNAT9gL.jpg?v=1784399544"},{"product_id":"memphis-fdbrontg12-12-ford-bronco-tailgate-subwoofer-enclosure","title":"Memphis FDBRONTG12 12\" Ford Bronco Tailgate Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis FDBRONTG12 is a vehicle-specific, unloaded enclosure designed to add a single 12-inch subwoofer to the swing gate of a Ford Bronco. It gives Bronco owners a dedicated bass location without using conventional cargo-area enclosure space. The enclosure is intended for a clean, integrated installation while allowing the swing gate to remain functional.\u003c\/p\u003e\u003cp\u003eThis enclosure is for listeners building a custom Bronco audio system who want to select their own compatible 12-inch subwoofer and amplification. Because it is sold without a subwoofer, its final bass output and power handling depend on the driver and amplifier chosen. Memphis specifically designs the cutout around its MM1224 12-inch subwoofer, which is sold separately.\u003c\/p\u003e\u003cp\u003eThe FDBRONTG12 uses a sealed enclosure format, supporting controlled low-frequency performance based on the installed subwoofer. Its swing-gate location keeps the driver mounted at the rear of the vehicle while preserving available interior room. This makes it a practical foundation for a bass upgrade in a vehicle used for daily driving, travel, or off-road recreation.\u003c\/p\u003e\u003cp\u003eA durable black bedliner-style exterior gives the enclosure a rugged finish suited to the Bronco environment. Custom-cut Memphis branding provides a finished appearance without changing the enclosure's vehicle-specific purpose. Integrated speaker terminals and RGB LED connectors help keep subwoofer and lighting connections organized during installation.\u003c\/p\u003e\u003cp\u003eThe enclosure mounts directly to the Bronco swing gate and includes hardware for an OEM-style fit. It can be paired with a compatible 12-inch subwoofer, an appropriately matched mono amplifier, and the required power, ground, signal, and speaker wiring. Confirm vehicle fitment and subwoofer mounting compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-Inch Cutout:\u003c\/strong\u003e Accommodates one compatible 12-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-Gate Mounting:\u003c\/strong\u003e Uses the Bronco tailgate area to conserve cabin space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Provides a dedicated sealed subwoofer mounting platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedliner Exterior:\u003c\/strong\u003e Adds a durable, rugged black exterior finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Connections:\u003c\/strong\u003e Includes speaker terminals and RGB LED connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Hardware:\u003c\/strong\u003e Mounting hardware is included for vehicle-specific installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe FDBRONTG12 is a vehicle-specific enclosure with a round 12-inch subwoofer opening, black sprayliner\/bedliner-style finish, and custom-cut Memphis branding. Its design mounts to the Bronco swing gate rather than occupying the main cargo floor. The enclosure is sold unloaded, so it does not include a subwoofer or amplifier.\u003c\/p\u003e\u003cp\u003eInstall the enclosure using the included mounting hardware and verify that the selected 12-inch subwoofer fits the cutout and enclosure before final assembly. Connect the chosen subwoofer to the integrated terminals, and connect RGB lighting only if the installed subwoofer supports it and the system includes compatible lighting wiring. Use an amplifier matched to the installed subwoofer's manufacturer power and impedance requirements, and verify swing-gate operation after installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171882054,"sku":"FDBRONTG12","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/913UAVkThIL.jpg?v=1784408651"},{"product_id":"memphis-audio-mbe8d12-dual-8-ported-subwoofer-enclosure","title":"Memphis Audio MBE8D12 Dual 8\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis Audio MBE8D12 is a loaded ported subwoofer enclosure with two 8-inch MB Series subwoofers. It provides a compact way to add dedicated low-frequency output to a car-audio system without designing and building a separate enclosure. Its narrow 6.3-inch depth can suit installations where space is limited.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners who want a ready-to-install bass foundation while retaining flexibility in amplifier selection. Memphis FLEX Technology allows the system impedance to be configured for either 1 ohm or 2 ohms. This gives installers a choice when matching the enclosure to a compatible mono amplifier.\u003c\/p\u003e\u003cp\u003eThe MBE8D12 is rated for 700 watts RMS and 1,400 watts peak power handling. Its specified sensitivity is 84. The side-loaded port is part of the enclosure design and is intended to support strong bass output from the dual 8-inch configuration.\u003c\/p\u003e\u003cp\u003eMemphis builds the enclosure from 100% MDF and finishes it in custom stitched carpet. A high-current, nickel-plated compression terminal provides the speaker connection point. These details support a clean, purpose-built installation rather than an exposed component-subwoofer setup.\u003c\/p\u003e\u003cp\u003eFor an under-seat or down-firing application, the included rubber feet can be fitted to the 8-inch enclosure. The loaded design means the subwoofers and enclosure are already matched as a single assembly. Add a compatible amplifier, appropriate wiring, and a properly configured signal path to complete the system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch MB Subwoofers:\u003c\/strong\u003e Delivers a complete dual-subwoofer bass enclosure in one package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Technology:\u003c\/strong\u003e Selects between 1-ohm and 2-ohm system impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching using continuous-power guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Loaded Port:\u003c\/strong\u003e Uses a ported enclosure layout for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% MDF Enclosure:\u003c\/strong\u003e Provides a rigid cabinet material for the loaded system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Rubber Feet:\u003c\/strong\u003e Supports optional down-firing placement on 8-inch models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MBE8D12 uses a 100% MDF enclosure with a side-loaded port, custom stitched carpet exterior, and a high-current nickel-plated compression terminal. It measures 20 inches long, 14 inches high, and 6.3 inches deep, with a 6.3-inch bottom depth. The compact dual-8-inch format is designed as a finished loaded enclosure rather than a bare box.\u003c\/p\u003e\u003cp\u003eMeasure the intended mounting space before installation, including clearance for the side port and wiring at the terminal. Choose the 1-ohm or 2-ohm FLEX configuration only with an amplifier designed to operate at that load, and set amplifier gain appropriately for the enclosure's 700-watt RMS rating. The included rubber feet may be installed when using the enclosure in a down-firing application.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633173651526,"sku":"MBE8D12","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71B3UVbOlZL.jpg?v=1784408896"},{"product_id":"memphis-mjme8s1v2-8-loaded-ported-subwoofer-enclosure","title":"Memphis MJME8S1V2 8\" Loaded Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis MJME8S1V2 is a loaded ported enclosure built around one 8-inch MOJO Mini subwoofer. It provides a ready-to-install bass solution for vehicles where adding low-frequency output without designing a custom enclosure is the goal. Its 1-ohm final impedance is intended for use with a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want a compact single-subwoofer upgrade for a car or truck audio system. The ported cabinet is designed to support strong low-frequency output, with a confirmed frequency response of 38-150 Hz. It handles 900 watts RMS and 1,800 watts peak power.\u003c\/p\u003e\u003cp\u003eThe installed MOJO Mini subwoofer uses a vented cast-aluminum basket, a fiberglass-reinforced dust cap, and a VGroove rubber surround. A 4-layer copper 2-inch voice coil and heat-dissipating aluminum heat sink help manage heat during demanding playback. Memphis also specifies DVVC Direct Vent Voice Coil Cooling for additional voice-coil ventilation.\u003c\/p\u003e\u003cp\u003eThe MJME8S1V2 combines its bass system with a finished enclosure that is practical for visible cargo-area installations. Its carpet-wrapped cabinet and piano-black gloss front panel provide a clean appearance while the ported design supports the subwoofer's output range. The enclosure has one 8-inch woofer and a single 1-ohm final load.\u003c\/p\u003e\u003cp\u003eUse this loaded enclosure as the bass section of a system with an external amplifier that is stable at 1 ohm and appropriately power matched. Confirm the available cargo or behind-seat space before purchase, especially the enclosure's 20.7-inch width and 16.2-inch bottom depth. A properly selected amplifier, wiring kit, and secure mounting arrangement are required for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 8-Inch MOJO Mini Subwoofer:\u003c\/strong\u003e Provides a complete bass enclosure with one installed subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900W RMS Power Handling:\u003c\/strong\u003e Supports substantial continuous power with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Impedance:\u003c\/strong\u003e Designed for an amplifier rated to operate at 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Supports bass output across its specified operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Layer Copper Voice Coil:\u003c\/strong\u003e Uses a 2-inch coil built for heat management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiano-Black Front Panel:\u003c\/strong\u003e Adds a gloss-finished visual detail to the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJME8S1V2 uses a carpet-wrapped, ported enclosure with a piano-black gloss finished front panel. The cabinet is listed with 3\/4-inch medium-density fiberboard construction, while the subwoofer uses a vented cast-aluminum basket, fiberglass-reinforced dust cap, VGroove rubber surround, and aluminum heat sink.\u003c\/p\u003e\u003cp\u003eMeasure the intended installation area before ordering: the enclosure is 20.7 inches wide, 12.7 inches high, 13.7 inches deep at the top, and 16.2 inches deep at the bottom. Wire the spring-post input to an external amplifier that is stable at the enclosure's 1-ohm load; the terminals accept up to 10-gauge speaker wire. Secure the enclosure to prevent movement during driving and keep the port unobstructed.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633178959942,"sku":"MJME8S1V2","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-DYYHU34L.jpg?v=1784409469"},{"product_id":"memphis-audio-mjmechev8d1v2-dual-8-subwoofer-enclosure","title":"Memphis Audio MJMECHEV8D1V2 Dual 8\" Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis Audio MJMECHEV8D1V2 is a vehicle-specific loaded subwoofer enclosure for 2007 and newer Chevrolet and GMC crew cab trucks. It combines two 8-inch MOJO Mini subwoofers in a compact enclosure designed for an under-seat-style truck installation. This solution gives truck owners a purpose-built way to add substantial bass without commissioning a custom enclosure.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for Chevrolet Silverado and GMC Sierra crew cab owners who want a direct-fit bass upgrade. Its vehicle-specific form is designed to fit with zero customization, helping preserve usable cabin space and simplify the planning process. The loaded design means the subwoofers are already matched to the enclosure.\u003c\/p\u003e\u003cp\u003eDual 8-inch MOJO Mini subwoofers and a side-ported enclosure provide a high-output bass foundation for a compatible audio system. The assembly is rated for 1,800 watts RMS and 3,600 watts peak power. Its 1-ohm final impedance is intended for use with an amplifier that is stable at a 1-ohm load.\u003c\/p\u003e\u003cp\u003eMemphis equips the subwoofers with stitched foam surrounds, heat-dissipating aluminum heat sinks, and DVVC Direct Vent Voice Coil Cooling. These features are designed to manage heat during demanding playback and support consistent operation. Protective high-excursion grilles help shield the woofers in an active truck cabin environment.\u003c\/p\u003e\u003cp\u003eThe MJMECHEV8D1V2 is a practical foundation for a dedicated low-frequency upgrade while retaining the factory radio or pairing with an aftermarket source unit. Add a properly matched mono amplifier, power wiring, signal integration, and installation hardware to complete the system. Its factory-oriented fit and preloaded configuration make it well suited to installers and truck owners seeking a more streamlined bass package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Designed for 2007 and newer Chevrolet and GMC crew cab trucks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch Subwoofers:\u003c\/strong\u003e Includes two MOJO Mini 8-inch subwoofers in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Provides a 1-ohm final impedance for a compatible mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Ported Enclosure:\u003c\/strong\u003e Uses a ported enclosure with a side-mounted port design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct Vent Voice Coil Cooling helps manage subwoofer heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles:\u003c\/strong\u003e High-excursion grilles help protect the exposed subwoofers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses a Memphis-branded durable bedliner finish intended to withstand regular truck-cabin use. Its loaded configuration combines two MOJO Mini subwoofers with stitched foam surrounds and aluminum heat sinks. Protective high-excursion grilles add physical protection at the woofer locations.\u003c\/p\u003e\u003cp\u003eVerify vehicle trim, rear-seat clearance, and amplifier compatibility before installation. Connect the enclosure to an amplifier rated for a 1-ohm load and match amplifier output responsibly to the enclosure's 1,800-watt RMS rating. Professional installation is recommended when integrating with a factory audio system or routing amplifier power wiring.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633179058246,"sku":"MJMECHEV8D1V2","price":899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71F-hWQZPrL.jpg?v=1784409509"},{"product_id":"memphis-mjmeford8d1v2-dual-8-mojo-mini-ford-enclosure","title":"Memphis MJMEFORD8D1V2 Dual 8\" MOJO Mini Ford Enclosure","description":"\u003cp\u003eThe Memphis MJMEFORD8D1V2 is a vehicle-specific loaded subwoofer enclosure for select Ford trucks. It combines two 8-inch MOJO Mini subwoofers in a side-ported enclosure intended to install beneath the rear seat. This provides a dedicated bass upgrade without requiring custom enclosure fabrication.\u003c\/p\u003e\u003cp\u003eThis enclosure is designed for 2009-up Ford F-150 SuperCrew trucks and 2017-up Ford F-250 and F-350 Super Duty trucks. Its vehicle-specific form is intended to fit the interior without modification. Confirm the exact truck configuration before purchase and installation.\u003c\/p\u003e\u003cp\u003eThe dual 8-inch arrangement is wired for a 1-ohm final impedance and is rated for 1800 watts RMS and 3600 watts peak power. The ported enclosure design is built to support strong low-frequency output in a pickup cabin. It is suited to systems using a compatible high-power mono subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eMOJO Mini subwoofer engineering includes Direct Vent Voice Coil Cooling (DVVC), a heat-dissipating aluminum heat sink, and a vented cast-aluminum basket. Each woofer uses a four-layer copper 2-inch voice coil. These features are designed to help manage heat and maintain structural support during sustained bass playback.\u003c\/p\u003e\u003cp\u003eThe enclosure has a Memphis-branded durable bedliner finish for a rugged installed appearance. Protective high-excursion metal grilles are included to help shield the woofers in the rear-seat area. With the enclosure and subwoofers already matched, an installer can focus on amplifier selection, power wiring, signal integration, and system tuning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Designed for select Ford SuperCrew and Super Duty trucks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch Subwoofers:\u003c\/strong\u003e Includes two MOJO Mini 8-inch woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Matches compatible mono amplifiers rated for 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1800-Watt RMS Rating:\u003c\/strong\u003e Supports substantial continuous system power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Ported Enclosure:\u003c\/strong\u003e Uses a ported design for low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Metal Grilles:\u003c\/strong\u003e Helps protect woofers beneath the rear seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJMEFORD8D1V2 uses a side-ported enclosure finished in durable bedliner coating, with protective high-excursion grilles over the subwoofers. Its woofer hardware includes vented cast-aluminum baskets, fiberglass-reinforced dust caps, VGroove rubber surrounds, aluminum heat sinks, and four-layer copper voice coils. The loaded design supplies the enclosure and both subwoofers as one matched assembly.\u003c\/p\u003e\u003cp\u003eInstall the enclosure under the rear seat in a confirmed compatible Ford truck, following the vehicle-specific placement intended by Memphis. Use a compatible mono amplifier that is stable at the enclosure's 1-ohm final impedance, plus appropriate power, ground, speaker, and signal wiring. The manufacturer and product listings do not identify an amplifier or wiring kit as included, so those components should be planned separately.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633179123782,"sku":"MJMEFORD8D1V2","price":899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71mZZ60rY3L.jpg?v=1784409545"},{"product_id":"memphis-mjpe12d1-dual-12-1-ohm-loaded-enclosure","title":"Memphis MJPE12D1 Dual 12\" 1-Ohm Loaded Enclosure","description":"\u003cp\u003eThe Memphis MJPE12D1 is a preloaded dual 12-inch subwoofer enclosure for vehicle audio systems that need substantial low-frequency output without building a custom box. It combines two subwoofers and a ported enclosure in one ready-to-install assembly. Its 1-ohm nominal load is intended for a compatible external subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to drivers with enough cargo-area space for a full-size dual-subwoofer system. The front-ported design is tuned to 34 Hz, giving the system a low-bass-focused character. It can be a practical upgrade for a factory or aftermarket stereo when paired with the appropriate amplifier and integration hardware.\u003c\/p\u003e\u003cp\u003eThe MJPE12D1 is rated for 1,500 watts RMS and 3,000 watts peak power handling. Those ratings describe the complete loaded enclosure rather than an individual subwoofer. For dependable operation, amplifier setup should be matched to the enclosure's 1-ohm impedance and RMS rating.\u003c\/p\u003e\u003cp\u003eIts enclosure is constructed from 100% MDF and finished in custom-stitched carpet. A front load port supports the ported enclosure design, while a high-current nickel-plated compression terminal provides the connection point. These details help make the enclosure suitable for conventional trunk, hatch, or cargo-area installations where its dimensions can be accommodated.\u003c\/p\u003e\u003cp\u003eThe integrated subwoofers use black polypropylene dust caps, woven tinsel leads, and high-temperature BASV voice coil formers. These construction details support the enclosure's intended high-power bass role. The MJPE12D1 can serve as the bass foundation of a system with an aftermarket monoblock amplifier, wiring kit, and signal integration appropriate for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Configuration:\u003c\/strong\u003e Two preinstalled 12-inch subwoofers provide a complete bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with a compatible 1-ohm-stable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Load Port:\u003c\/strong\u003e Ported design is tuned to 34 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% MDF Enclosure:\u003c\/strong\u003e Provides a rigid enclosure structure for the installed subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNickel-Plated Compression Terminal:\u003c\/strong\u003e Offers a dedicated high-current speaker-wire connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPE12D1 uses a 100% MDF enclosure with a custom-stitched carpet exterior. Its front port, black polypropylene dust caps, and woven tinsel leads are part of the integrated design. The enclosure measures 34.65 inches long, 15.15 inches high, 12.6 inches deep at the top, and 17.72 inches deep at the bottom.\u003c\/p\u003e\u003cp\u003eConfirm the available cargo-space dimensions before purchase, including clearance for the front port and wiring at the terminal. Connect it only to an external amplifier that is stable at a 1-ohm load, and set amplifier gain and filtering carefully. An amplifier, wiring, and vehicle-specific signal integration are separate system components and are not identified as included with the enclosure.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183645766,"sku":"MJPE12D1","price":699.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VU2Ln-8_L.jpg?v=1784410632"},{"product_id":"memphis-prxe12dft-dual-12-ported-loaded-enclosure","title":"Memphis PRXE12DFT Dual 12\" Ported Loaded Enclosure","description":"\u003cp\u003eThe Memphis PRXE12DFT is a preloaded dual 12-inch subwoofer enclosure for adding substantial bass to a car-audio system without designing a separate box and driver combination. It combines two Memphis Power Reference PRXL12FT subwoofers in one front-ported cabinet. This makes it a practical option for listeners who want a single, complete bass enclosure for a trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eThe enclosure is rated for 800 watts RMS and 1,600 watts peak power handling. Its dual 12-inch driver layout is intended to provide strong low-frequency output when paired with an appropriately matched mono amplifier. Because it is already loaded, the buyer can focus on amplifier selection, wiring, and vehicle placement rather than choosing and mounting separate subwoofers.\u003c\/p\u003e\u003cp\u003eEach included PRXL12FT subwoofer uses Memphis FLEX Triple Selectable Impedance technology. The driver impedance can be configured for 1-, 2-, or 4-ohm operation, while the complete enclosure offers 0.5-, 1-, or 2-ohm wiring configurations. This flexibility can help the enclosure work with different compatible amplifier load ratings.\u003c\/p\u003e\u003cp\u003eA front-firing rectangular port is part of the enclosure design, with a plastic port flare at the opening. The port and flare are designed to support vented-box bass output while helping reduce audible port turbulence. The result is a loaded enclosure suited to systems where a ported bass character is preferred.\u003c\/p\u003e\u003cp\u003eRGB lighting is integrated into the woofer cone accents and the Memphis logo on the front of the enclosure. The lighting can be hardwired to a 12-volt source for fixed colors, or used with the separately sold Memphis MXRGBBTC RGB controller for additional control. This lets the enclosure serve as both a bass upgrade and a visible component in a custom audio installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Loaded Design:\u003c\/strong\u003e Two preinstalled Power Reference subwoofers simplify system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Handling:\u003c\/strong\u003e Supports a properly matched high-output mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Offers multiple enclosure load options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Directs port output toward the cabin area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlared Port Opening:\u003c\/strong\u003e Helps reduce turbulence at the port outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Illuminates woofer accents and the Memphis front logo.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRXE12DFT is an integrated, ported loaded enclosure with two 12-inch PRXL12FT subwoofers, a front-facing rectangular port, and a molded plastic port flare. The black enclosure presentation is complemented by RGB cone accents and an illuminated Memphis logo. Its tapered cabinet dimensions are listed as 35 inches long, 15.5 inches high, 14 inches top depth, and 16.5 inches bottom depth.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a suitable cargo area and connect its spring-post input with speaker wire up to 10 AWG. Match the amplifier to the selected final enclosure impedance and its 800-watt RMS rating; the default enclosure load is listed as 2 ohms. Changing the enclosure impedance requires removing both subwoofers to access their wiring, and RGB lighting requires a 12-volt power and ground connection or a compatible optional RGB controller.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633199603782,"sku":"PRXE12DFT","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71g713htWoL.jpg?v=1784414577"},{"product_id":"memphis-prxe12sft-12-rgb-ported-loaded-enclosure","title":"Memphis PRXE12SFT 12\" RGB Ported Loaded Enclosure","description":"\u003cp\u003eThe Memphis PRXE12SFT is a loaded, ported subwoofer enclosure built around a single 12-inch Power Reference woofer. It provides a ready-to-install bass foundation for vehicle audio systems that need low-frequency output without designing a separate enclosure. The compact cabinet format helps simplify a subwoofer upgrade by combining the woofer and enclosure in one assembly.\u003c\/p\u003e\u003cp\u003eThis enclosure is designed for listeners who want a single-subwoofer solution with adaptable amplifier matching. Its FLEX selectable-impedance design supports 1-ohm, 2-ohm, or 4-ohm configurations, allowing the system to be tailored around a compatible mono amplifier. The enclosure is factory configured at 2 ohms, while other impedance selections require access to the woofer wiring.\u003c\/p\u003e\u003cp\u003eWith a 400-watt RMS and 800-watt peak power rating, the PRXE12SFT is intended for an amplifier matched to its continuous power capability and selected load. The front-firing rectangular port directs output toward the cabin. A plastic port flare is used to promote smoother airflow and help reduce audible port noise.\u003c\/p\u003e\u003cp\u003eThe loaded woofer uses an RGB LED cone accent, and the Memphis logo on the baffle is also RGB illuminated. This gives the enclosure a coordinated lighting feature while retaining a conventional carpeted enclosure appearance. The lighting can be hardwired to a 12-volt source or used with a compatible optional RGB controller.\u003c\/p\u003e\u003cp\u003eThe PRXE12SFT fits systems where enclosure space, amplifier load flexibility, and integrated lighting are all considerations. Its trapezoidal cabinet measures 22 inches long by 15.5 inches high, with 14-inch top depth and 16.5-inch bottom depth. A single set of spring-post terminals accepts speaker wire up to 10 AWG for connection to the amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-Inch Loaded Design:\u003c\/strong\u003e Combines one subwoofer and a matched ported enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Supports 1-ohm, 2-ohm, or 4-ohm system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Handling:\u003c\/strong\u003e Provides a continuous-power target for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Directs bass forward through a rectangular vent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlastic Port Flare:\u003c\/strong\u003e Helps smooth airflow and reduce vent noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Illuminates the woofer cone and Memphis logo.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses an MDF cabinet wrapped in black carpet, with a front-firing rectangular port and molded plastic flare. Its loaded PRX-series woofer uses a black polypropylene cone, stitched butyl rubber surround, reinforced spider, woven tinsel leads, and a high-temperature TIL voice-coil former. The cabinet holds one 12-inch woofer and uses a single terminal cup with spring-post speaker connections.\u003c\/p\u003e\u003cp\u003eConfirm the available vehicle space before installation using the listed 22 x 15.5 x 14 x 16.5-inch enclosure dimensions. Match the amplifier to the enclosure's 400-watt RMS rating and the selected 1-, 2-, or 4-ohm load; the factory configuration is 2 ohms. Changing impedance requires removing the woofer to access its wiring, and RGB operation requires the included harness to be connected to 12-volt power and ground or to an optional compatible RGB controller.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633199800390,"sku":"PRXE12SFT","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/714pB1a-yTL.jpg?v=1784414633"},{"product_id":"rockford-fosgate-p1-2x10-dual-10-ported-subwoofer-enclosure","title":"Rockford Fosgate P1-2X10 Dual 10\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P1-2X10 is a loaded, ported enclosure designed to add dedicated low-frequency output to a car audio system without requiring a custom subwoofer box. It combines two 10-inch Punch P1 subwoofers in a preassembled vented cabinet. This is a practical option for listeners who want a straightforward bass upgrade with a single enclosure connection point.\u003c\/p\u003e\u003cp\u003eThe enclosure is internally wired for a 2-ohm nominal load and handles 500 watts RMS total. Its two P1S4-10 single-voice-coil woofers share the system power rating at 250 watts RMS each. Match it with a mono amplifier that is stable at 2 ohms and appropriately rated for the enclosure's recommended 250-500 watts RMS range.\u003c\/p\u003e\u003cp\u003eA ported enclosure is intended to support strong bass output and low-frequency extension while using a ready-made cabinet. The P1-2X10 uses a front-firing tuned port with a high-flow, low-noise design. This makes it well suited to vehicles where a conventional rectangular enclosure can be secured in the cargo area.\u003c\/p\u003e\u003cp\u003eEach P1 subwoofer uses a Kevlar-reinforced paper-pulp cone, high-density NBR surround, 2-inch voice coil, and vented motor structure. These construction details support controlled cone movement and thermal management during sustained listening. The enclosure's internally wired configuration eliminates the need to wire the two woofers together externally.\u003c\/p\u003e\u003cp\u003eThe cabinet is built from 5\/8-inch MDF and finished in high-density black carpet for a durable, integrated appearance. High-current binding posts provide the amplifier connection, with red for positive and black for negative. The P1-2X10 is a complete loaded-subwoofer solution, but it still requires a compatible external amplifier, amplifier wiring, and installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch P1 Woofers:\u003c\/strong\u003e Two factory-installed Punch P1 subwoofers provide a complete bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Load:\u003c\/strong\u003e Internal wiring simplifies connection to a compatible 2-ohm mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Handling:\u003c\/strong\u003e Supports sustained system power up to 500 watts RMS total.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Front-firing tuned port supports efficient low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Solid MDF construction provides a stable enclosure structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Binding Posts:\u003c\/strong\u003e Convenient speaker-wire terminals connect the enclosure to an amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1-2X10 uses a rectangular, hatchback-style ported cabinet constructed from 5\/8-inch MDF and covered in high-density black carpet. Its front-firing port is designed for high airflow with reduced port noise, while the two Punch P1 woofers use Kevlar-reinforced paper-pulp cones, high-density NBR surrounds, and vented motor assemblies. A single terminal cup with high-current binding posts provides the external connection.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure location with adequate clearance for its 13.125-inch height, 31.125-inch width, and 15.125-inch depth. Connect the amplifier's positive speaker output to the enclosure's red terminal and negative output to the black terminal, using 16- to 12-AWG speaker wire with approximately 5\/8 inch of insulation removed. Disconnect the vehicle battery negative terminal before installation, and use an external amplifier rated for a 2-ohm load.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634057994310,"sku":"P1-2X10","price":459.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61tX6hF8xWL.jpg?v=1784427877"},{"product_id":"rockford-fosgate-p1-2x12-dual-12-ported-subwoofer-enclosure","title":"Rockford Fosgate P1-2X12 Dual 12\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P1-2X12 is a loaded dual-12-inch subwoofer enclosure built for adding dedicated low-frequency output to a car audio system. It combines two Punch P1S4-12 single-voice-coil subwoofers in a factory-built vented cabinet. The enclosure arrives internally wired as a 2-ohm load, simplifying amplifier matching and system installation.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners who want a straightforward bass upgrade without designing or building a custom box. Its ported alignment is designed to support strong output in the lower bass range while retaining useful musical detail. With 500 watts RMS system power handling, it is suited to a properly matched mono amplifier that is stable at 2 ohms.\u003c\/p\u003e\u003cp\u003eEach installed Punch P1S4-12 woofer uses a Kevlar-reinforced paper cone, high-density NBR half-roll surround, and high-temperature voice coil. The two 4-ohm single-voice-coil woofers are wired in parallel inside the enclosure to create the final 2-ohm nominal load. The system is rated for 1,000 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eThe cabinet uses 5\/8-inch MDF construction and high-density carpet covering for a durable, finished appearance in a trunk or cargo area. Its proprietary high-flow, low-noise port is designed to move air efficiently while reducing port turbulence. High-current binding posts provide a single external connection point for the prewired enclosure.\u003c\/p\u003e\u003cp\u003eThe P1-2X12 works as the bass section of a complete aftermarket audio system. Pair it with a compatible amplifier delivering power within the enclosure's 100-500 watt RMS range at 2 ohms, then set a suitable low-pass filter for integration with full-range speakers. Its all-in-one design also makes it practical for vehicles where the enclosure may need to be removed to regain cargo space.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Configuration:\u003c\/strong\u003e Two Punch P1S4-12 subwoofers provide a ready-to-install bass system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Load:\u003c\/strong\u003e Internal wiring creates a 2-ohm nominal load for a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500 Watts RMS:\u003c\/strong\u003e Supports substantial continuous amplifier power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Cabinet:\u003c\/strong\u003e Ported enclosure design supports efficient low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Construction:\u003c\/strong\u003e Rigid cabinet material helps support dependable enclosure structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Flow Port:\u003c\/strong\u003e Proprietary port design is intended to reduce audible port noise.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is constructed from 5\/8-inch medium-density fiberboard and covered in high-density carpet. It houses two 12-inch P1S4-12 woofers with Kevlar-reinforced paper cones, NBR surrounds, and steel baskets. The vented design includes a proprietary high-flow, low-noise port and high-current binding posts for the external speaker connection.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a trunk or cargo area, allowing the port and woofers adequate clearance. Connect the amplifier's positive speaker output to the enclosure's red terminal and the negative output to the black terminal; the installation documentation specifies 16- to 12-AWG speaker cable. Use a 2-ohm-stable amplifier, keep amplifier output within the enclosure's RMS rating range, and use an active low-pass crossover for integration with the rest of the system.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634081652806,"sku":"P1-2X12","price":489.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61UvedZa01L.jpg?v=1784427946"},{"product_id":"rockford-fosgate-p3-2x12-dual-12-ported-subwoofer-enclosure","title":"Rockford Fosgate P3-2X12 Dual 12\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P3-2X12 is a factory-loaded, dual 12-inch subwoofer enclosure for adding substantial low-frequency output to a car or truck audio system. It combines two Punch P3 dual-voice-coil woofers in a vented cabinet, eliminating the need to select and build a separate enclosure. The enclosure is internally wired for a 1-ohm final load, making amplifier matching more straightforward for systems built around a stable mono amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners who want deeper bass response and greater output than typical full-range door speakers can provide. Its ported design is engineered to support strong low-bass performance while maintaining the efficiency associated with a vented enclosure. With 1,200 watts RMS total power handling, it is suited to a properly configured high-power subwoofer stage.\u003c\/p\u003e\u003cp\u003eTwo 12-inch Punch P3 woofers provide the moving surface area needed for impactful bass in larger vehicles and systems that prioritize bass presence. The installed P3D4-12 woofers use dual 4-ohm voice coils, and the enclosure's internal wiring combines them into its rated 1-ohm load. This preconfigured setup avoids the need to rewire the individual subwoofer voice coils for normal use.\u003c\/p\u003e\u003cp\u003eThe cabinet uses 5\/8-inch MDF construction and high-density carpet covering for a durable, vehicle-friendly finish. Rockford Fosgate's high-flow, low-noise port design is built into the enclosure to manage airflow, while high-current binding posts provide the external amplifier connection. The enclosure is sized for trunk, cargo-area, or other protected vehicle installations where its full dimensions can be accommodated.\u003c\/p\u003e\u003cp\u003eThe P3-2X12 is a passive loaded enclosure, so it requires a separate amplifier, amplifier wiring, and signal integration with the vehicle's audio system. A mono amplifier designed to operate at 1 ohm and matched appropriately to the enclosure's 1,200-watt RMS rating is the intended configuration. It can serve as the bass foundation of a complete aftermarket audio upgrade while the vehicle's existing speakers handle midrange and high-frequency content.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch P3 Woofers:\u003c\/strong\u003e Two loaded Punch P3 subwoofers provide substantial cone area for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Internal wiring presents a 1-ohm nominal load to a compatible mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained high-power bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Enclosure:\u003c\/strong\u003e The ported cabinet design supports efficient, high-output low-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e MDF construction creates a rigid foundation for the installed subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Binding Posts:\u003c\/strong\u003e External terminals provide a secure connection point for amplifier speaker wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3-2X12 enclosure is constructed from 5\/8-inch MDF and covered in high-density carpet. Its vented design incorporates proprietary high-flow, low-noise ports, while the cabinet uses high-current binding posts for the amplifier connection. The loaded woofers are P3D4-12 dual 4-ohm models, with aluminum cone and dustcap assemblies, StampCast baskets, integrated spider venting, and protective PVC-textured magnet covers.\u003c\/p\u003e\u003cp\u003eConfirm that the intended mounting location has clearance for the enclosure's 15.125-inch height, 33.875-inch width, and 15.75-inch depth before purchase. Connect the amplifier's positive speaker output to the enclosure's red terminal and its negative output to the black terminal; the enclosure is designed for a 1-ohm mono amplifier connection. Disconnect the vehicle battery's negative terminal before installation, route speaker wire away from high-current vehicle wiring, and secure the enclosure so it cannot shift while driving.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634312831046,"sku":"P3-2X12","price":789.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/615Fi1hsYxL.jpg?v=1784430484"},{"product_id":"rockford-fosgate-p300-10-10-powered-subwoofer-enclosure","title":"Rockford Fosgate P300-10 10\" Powered Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P300-10 is a self-powered bass enclosure built around a single 10-inch subwoofer and an integrated 300-watt RMS amplifier. It provides a compact way to add low-frequency output without separately selecting, wiring, and mounting an external amplifier and subwoofer enclosure. The sealed wedge enclosure is suited to vehicle installations where cargo-space efficiency and straightforward integration are priorities.\u003c\/p\u003e\u003cp\u003eThis model is designed for drivers upgrading either a factory or aftermarket audio system. Its RCA and speaker-level input options allow it to accept signal from a variety of source units, including systems without dedicated preamp outputs. A selectable automatic turn-on function can further simplify integration with compatible factory speaker wiring.\u003c\/p\u003e\u003cp\u003eThe P300-10 is rated for 300 watts RMS and 600 watts peak, with a 35 Hz to 200 Hz frequency response. Its adjustable low-pass crossover lets the bass range be blended with the vehicle's full-range speakers. An adjustable Punch Bass control and 0°\/180° phase switch provide additional setup flexibility for the vehicle and installation location.\u003c\/p\u003e\u003cp\u003eRockford Fosgate uses a matched, closed-loop approach that combines the woofer, amplifier, and enclosure as one system. The built-in 12 dB-per-octave Butterworth low-pass filter is adjustable from 50 Hz to 200 Hz. Gain adjustment and the included wired Punch Level Control make it possible to set the enclosure's output for the system and make bass-level changes from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eThe enclosure uses quick-disconnect power and signal connections, which can make removal easier when cargo space is needed. Its wedge profile measures 13.3 inches high by 18.0 inches wide, with 8.9-inch and 5.9-inch depth measurements. It is a practical powered-subwoofer option for trunk or passenger-compartment installations with adequate ventilation around the amplifier section.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Amplifier:\u003c\/strong\u003e Integrated amplification is matched to the included 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Enclosure:\u003c\/strong\u003e Compact cabinet profile helps conserve usable vehicle space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And Speaker-Level Inputs:\u003c\/strong\u003e Connects with aftermarket or many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Crossover:\u003c\/strong\u003e Adjusts from 50 Hz to 200 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePunch Bass Control:\u003c\/strong\u003e Provides adjustable bass boost from 0 to +12 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Punch Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer output remotely.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P300-10 combines a proprietary 10-inch woofer, integrated amplifier, and sealed enclosure in a single assembly. The enclosure is constructed from 5\/8-inch MDF and covered in industrial heat-activated vinyl. A Power\/Protect indicator and protection circuitry help communicate operating status, while the quick-disconnect power connector supports convenient service or removal.\u003c\/p\u003e\u003cp\u003eInstallation requires battery power, chassis ground, and an input signal connection; a remote turn-on lead may be used, or the unit can be configured for DC-offset or audio-sense turn-on. Use the supplied RCA\/speaker harness for low-level RCA or high-level speaker input, set the input-level switch accordingly, and secure the enclosure in a structurally sound location. Leave at least 1 inch of air space around the amplifier heatsink, use properly fused power wiring, and have a qualified installer complete the work if needed.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634347860038,"sku":"P300-10","price":339.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81zxcNNdtsL.jpg?v=1784430793"},{"product_id":"rockford-fosgate-p300-12-12-powered-subwoofer-enclosure","title":"Rockford Fosgate P300-12 12\" Powered Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P300-12 is a self-contained powered subwoofer system that combines a 12-inch woofer, integrated amplifier, and sealed enclosure in one package. It is intended for drivers who want to add low-frequency output without separately selecting and matching a subwoofer, amplifier, and box. With the amplifier built into the enclosure, it reduces the number of components required for a bass upgrade.\u003c\/p\u003e\u003cp\u003eThe integrated Class-D amplifier is rated at 300 watts RMS and 600 watts peak. Its sealed enclosure design supports controlled bass response and straightforward placement in a trunk or cargo area. The system uses a closed-loop design intended to match the woofer, amplifier, and enclosure as a complete assembly.\u003c\/p\u003e\u003cp\u003eThe P300-12 can work with aftermarket receivers through its RCA low-level input or with many factory systems through its speaker-level input. A selectable input level and automatic turn-on options help it integrate into a range of vehicle audio systems. Its remote, DC-offset, and audio-sensing turn-on modes provide installation flexibility.\u003c\/p\u003e\u003cp\u003eBuilt-in tuning controls allow the subwoofer to be adjusted to blend with the vehicle's main speakers. The variable low-pass crossover operates from 50 Hz to 200 Hz, while the Punch Bass control provides adjustable boost centered at 45 Hz. A 0°\/180° phase switch can help optimize bass response based on enclosure placement and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eThe wedge-shaped enclosure measures 15.0 inches high by 19.8 inches wide, with depths of 11.0 and 7.0 inches. It uses 5\/8-inch MDF construction with an industrial heat-activated vinyl covering. A wired Punch Level Control is included for convenient bass-level adjustment from the driver's seat.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 300W RMS Amplifier:\u003c\/strong\u003e Combines amplification and subwoofer enclosure in one system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Punch Woofer:\u003c\/strong\u003e Delivers dedicated low-frequency output from a sealed enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And Speaker-Level Inputs:\u003c\/strong\u003e Supports aftermarket and many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Crossover:\u003c\/strong\u003e Adjusts from 50 Hz to 200 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePunch Bass EQ:\u003c\/strong\u003e Provides 0 to +12 dB adjustment at 45 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Punch Level Control:\u003c\/strong\u003e Lets the driver adjust bass level remotely.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P300-12 uses a sealed 5\/8-inch MDF wedge enclosure covered in industrial heat-activated vinyl. Its built-in amplifier uses Class-D circuitry, convection cooling, and an extruded-aluminum heat sink. Power and protect indicators, thermal protection, and over\/under-voltage protection are incorporated into the design.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a suitable trunk or cargo-area location, leaving access to its controls and connections. The system requires vehicle power, ground, and an audio signal connection; it accepts either RCA low-level or speaker-level signal input. Use the included remote level control for on-the-go adjustment, and set gain, crossover, bass boost, phase, input type, and turn-on mode during system setup.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634355331142,"sku":"P300-12","price":389.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81CVI3H4yfL.jpg?v=1784430902"},{"product_id":"rockford-fosgate-p300-8p-8-powered-subwoofer-enclosure","title":"Rockford Fosgate P300-8P 8\" Powered Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate P300-8P is a self-contained powered subwoofer system built for adding low-frequency output without assembling a separate amplifier, enclosure, and woofer. It combines an 8-inch woofer, a ported MDF enclosure, and a 300-watt RMS Class-D amplifier in one compact package. This approach is well suited to factory or aftermarket audio systems that need more bass while conserving vehicle space.\u003c\/p\u003e\u003cp\u003eIts slim enclosure measures 11.4 inches high, 17.6 inches wide, and 5.6 inches deep, making it a practical option for many trucks, small cars, hatchbacks, and sedans. The vented enclosure is designed to support efficient bass output from the compact 8-inch driver. A protective grille helps shield the woofer in active cargo or seating areas.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is matched to the enclosure's dedicated low-impedance woofer and delivers 300 watts RMS. A variable low-pass crossover, adjustable bass boost, and phase control help blend the subwoofer with the vehicle's full-range speakers. The included Punch Level Control lets the listener adjust bass level from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eThe P300-8P supports both low-level RCA and high-level speaker inputs, allowing it to work with many aftermarket radios and factory audio systems. Its auto turn-on selector offers remote-trigger, DC-offset-sense, and audio-sense operating modes. This flexibility can simplify integration when a conventional remote turn-on lead is not available.\u003c\/p\u003e\u003cp\u003eQuick-disconnect signal and power connections make the enclosure easier to remove when vehicle space is needed. The MDF enclosure uses a heat-activated vinyl finish designed to resist marks. For an upgrade path focused on adding a compact bass system, the P300-8P provides amplification, enclosure, and subwoofer integration in a single unit.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-In-One Powered Enclosure:\u003c\/strong\u003e Combines the woofer, amplifier, and vented cabinet in one system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Class-D Amplifier:\u003c\/strong\u003e Provides efficient power matched to the integrated subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim 8-Inch Design:\u003c\/strong\u003e Helps fit bass reinforcement into space-limited vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Connects to factory speaker wiring or aftermarket RCA outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Sound Controls:\u003c\/strong\u003e Low-pass crossover, bass boost, and phase settings support system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Punch Level Control:\u003c\/strong\u003e Lets the driver adjust bass level from the front seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P300-8P uses a 5\/8-inch MDF vented enclosure with a heat-activated vinyl finish. Its dedicated 8-inch woofer uses dual 1-ohm voice coils, an injection-molded polypropylene cone and dust cap, and a stamped-steel basket with cooling vents. The integrated amplifier uses an extruded-aluminum heatsink and convection cooling, while the enclosure includes a heavy-duty mesh grille for woofer protection.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a location that preserves clearance for the driver, venting, wiring, and vehicle-seat movement. Use the high-level inputs for speaker-output integration or the RCA inputs for a compatible aftermarket source unit; the amplifier accepts 8 AWG power and ground wiring and an 18 AWG remote lead when using remote-trigger turn-on. Set the crossover, bass boost, phase control, and input level after installation to blend bass output with the rest of the system.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634364702790,"sku":"P300-8P","price":309.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71NsV7W-qgL.jpg?v=1784431278"},{"product_id":"rockford-fosgate-r2-2x10-dual-10-sealed-subwoofer-enclosure","title":"Rockford Fosgate R2-2X10 Dual 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate R2-2X10 is a dual 10-inch loaded subwoofer enclosure for adding dedicated low-frequency output to a car audio system. It combines two Prime R2 dual-voice-coil subwoofers in a factory-built sealed enclosure, eliminating the need to select separate drivers and build a box. This makes it a practical option for listeners who want a ready-to-wire bass upgrade.\u003c\/p\u003e\u003cp\u003eThe enclosure is internally wired as a 2-ohm mono load and is rated for 500 watts RMS total power handling. Its sealed alignment is suited to systems seeking a compact, controlled bass foundation rather than the added enclosure complexity of a custom ported design. An external amplifier is required to operate the enclosure.\u003c\/p\u003e\u003cp\u003eEach enclosure uses an R2D2-10 replacement woofer with a dual voice coil design, polypropylene cone, foam surround, and integrated trim ring. The two-driver layout increases cone area over a single 10-inch subwoofer while keeping the enclosure in a trunk-friendly rectangular format. High-current binding posts provide a straightforward connection point for speaker wire from the amplifier.\u003c\/p\u003e\u003cp\u003eRockford Fosgate builds the cabinet from 5\/8-inch MDF and covers it in high-density carpet for a finished appearance and everyday vehicle use. The enclosure measures 12.2 inches high, 30.12 inches wide, and 12.11 inches deep. Its black carpeted finish helps it integrate cleanly with many trunk and cargo-area installations.\u003c\/p\u003e\u003cp\u003eThe R2-2X10 fits well into a system built around a compatible 2-ohm-stable mono amplifier and an existing factory or aftermarket source unit. Because the woofers and enclosure are already matched and wired, installation can be simpler than assembling individual subwoofers, a separate box, and internal wiring. Use appropriate amplifier setup, secure mounting, and safe wire routing to complete the upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Design:\u003c\/strong\u003e Two pre-installed R2D2-10 subwoofers provide increased cone area in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Handling:\u003c\/strong\u003e Supports 500 watts RMS total system power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Mono Load:\u003c\/strong\u003e Internal wiring presents a 2-ohm load to a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Factory-built sealed cabinet simplifies subwoofer system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e MDF construction provides a rigid foundation for the loaded drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Binding Posts:\u003c\/strong\u003e Rear terminals accept 16 AWG to 12 AWG speaker wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2-2X10 uses a precision-built sealed enclosure constructed from 5\/8-inch MDF and finished in high-density black carpet. It is loaded with two R2D2-10 dual-voice-coil subwoofers featuring polypropylene cones, foam surrounds, stamped baskets, integrated trim rings, and dual 12 AWG compression terminals. The cabinet uses high-current binding posts for its external amplifier connection.\u003c\/p\u003e\u003cp\u003eConnect the amplifier's positive speaker output to the enclosure's red terminal and the negative output to the black terminal. Use 16 AWG to 12 AWG speaker wire, strip approximately 5\/8 inch of insulation, and route speaker wire away from high-current vehicle wiring where possible. Disconnect the vehicle battery's negative terminal before installation, securely mount the enclosure, and pair it with a 2-ohm-stable mono amplifier matched appropriately to its 500-watt RMS total rating.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45640693219398,"sku":"R2-2X10","price":339.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71AaXvttnrL.jpg?v=1784435151"},{"product_id":"rockford-fosgate-r2-2x12-dual-12-sealed-subwoofer-enclosure","title":"Rockford Fosgate R2-2X12 Dual 12\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate R2-2X12 is a loaded car-audio subwoofer enclosure that combines two 12-inch Prime R2 subwoofers in one factory-built sealed cabinet. It is designed for vehicle owners who want to add dedicated low-frequency output without selecting separate drivers and building an enclosure. The enclosure is internally wired and ready to connect to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis model presents a practical bass upgrade for cars, trucks, SUVs, and hatchbacks with sufficient cargo-area space. Its dual-subwoofer layout increases cone area over a single-sub setup while keeping installation straightforward. The sealed enclosure design is intended for a controlled low-frequency foundation that complements amplified full-range speakers.\u003c\/p\u003e\u003cp\u003eThe R2-2X12 is rated for 500 watts RMS and 1,000 watts peak power as a complete enclosure. Its factory wiring presents a 2-ohm nominal load to a mono amplifier, so amplifier selection should focus on stable 2-ohm operation and an appropriate continuous-power rating. Rockford Fosgate specifies CTA-2031 power-handling compliance for this enclosure.\u003c\/p\u003e\u003cp\u003eInside are two R2D2-12 dual-voice-coil subwoofers, each using a polypropylene cone, foam surround, stamped steel basket, and copper voice coil on an aluminum former. The driver design also incorporates a poly-cotton spider, stitched flexible lead wires, and vented motor components. These engineering details support the enclosure's role as a complete, purpose-matched bass section.\u003c\/p\u003e\u003cp\u003eThe R2-2X12 fits well into a system upgrade path where a factory or aftermarket stereo feeds an external mono amplifier. Because the enclosure is already loaded and wired, the primary remaining tasks are choosing a compatible amplifier, running suitable power and signal wiring, and securing the enclosure in the vehicle. Its high-current binding posts provide a direct connection point for the amplifier's speaker output.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Subwoofers:\u003c\/strong\u003e Two factory-installed R2D2-12 drivers provide a complete bass solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Load:\u003c\/strong\u003e Internal wiring simplifies matching with a 2-ohm-stable mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt RMS Rating:\u003c\/strong\u003e Supports continuous power handling for properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Factory-built cabinet avoids separate box design and driver installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Dense MDF construction provides a durable enclosure structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Binding Posts:\u003c\/strong\u003e Compression terminals accept 16 AWG to 12 AWG speaker wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is constructed from 5\/8-inch MDF and finished in high-density carpet. It uses high-current binding posts and houses two dual-voice-coil R2D2-12 subwoofers with integrated trim rings, stamped steel baskets, polypropylene cones, foam surrounds, and aluminum voice-coil formers. The sealed cabinet is pre-loaded, so the subwoofers and enclosure are matched from the factory.\u003c\/p\u003e\u003cp\u003eMeasure the intended cargo area against the enclosure's 14.37-inch height, 34.06-inch width, and 12.51-inch depth before purchase. Connect an amplifier's positive speaker output to the red enclosure terminal and its negative output to the black terminal, using 16 AWG to 12 AWG speaker wire; Rockford Fosgate identifies a 2-ohm mono amplifier configuration. Disconnect the vehicle battery's negative terminal before installation, route speaker wire away from high-current wiring, and securely mount the enclosure so it cannot shift while driving.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45640808136774,"sku":"R2-2X12","price":369.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71CtKbVa3bL.jpg?v=1784435203"},{"product_id":"rockford-fosgate-rfgnrl-fwe-10-front-subwoofer-enclosure","title":"Rockford Fosgate RFGNRL-FWE 10\" Front Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate RFGNRL-FWE is a vehicle-specific front subwoofer enclosure designed for select Polaris GENERAL 1000 side-by-side models. It provides a dedicated location for one compatible 10-inch Rockford Fosgate subwoofer while preserving a clean, integrated appearance. The enclosure itself is sold empty, allowing the system to be configured around the selected subwoofer and amplifier.\u003c\/p\u003e\u003cp\u003eThis sealed enclosure is intended for GENERAL owners adding low-frequency capability to a Rockford Fosgate motorsports audio system. Its front-mounted design installs on the passenger side behind the dash and glove compartment, keeping the subwoofer installation out of the main cabin area. Once the interior panels are reinstalled, the enclosure is concealed for a stealth-oriented finish.\u003c\/p\u003e\u003cp\u003eDesigned around a sealed enclosure format, the RFGNRL-FWE supports controlled bass performance when paired with an appropriate compatible 10-inch subwoofer. It is compatible with specified Rockford Fosgate Prime Marine and Power Series slim subwoofer models. Subwoofer power handling, impedance, and final output depend on the separately purchased woofer and amplifier.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a roto-molded, seamless HDPE composite construction with a texture and color intended to complement the vehicle interior. Its vehicle-specific shape is engineered to use factory mounting locations, reducing the need for custom fabrication. An amplifier bracket is included to help position a compatible amplifier near the enclosure.\u003c\/p\u003e\u003cp\u003eThe RFGNRL-FWE is designed to work alongside Rockford Fosgate GENERAL-specific audio components, including the RFGNRL-K8 amplifier wiring kit. It can be used in compatible two-seat and four-seat GENERAL 1000 configurations. Confirm vehicle trim, factory options, subwoofer selection, amplifier requirements, and wiring needs before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer Fitment:\u003c\/strong\u003e Holds one compatible Rockford Fosgate 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Provides an optimized enclosed mounting environment for compatible woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Design:\u003c\/strong\u003e Fits behind the passenger-side dash and glove compartment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoto-Molded Construction:\u003c\/strong\u003e Seamless composite design balances durability and low weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Mount Installation:\u003c\/strong\u003e Uses existing vehicle mounting points with minimal drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Bracket Included:\u003c\/strong\u003e Provides a dedicated nearby mounting location for an amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RFGNRL-FWE is built as a black, vehicle-specific sealed enclosure with a round 10-inch subwoofer opening. Its roto-molded HDPE composite construction is designed for a lightweight, durable, seamless form factor. The exterior texture and color are matched to the intended vehicle interior, helping the enclosure blend in after installation.\u003c\/p\u003e\u003cp\u003eInstallation places the enclosure behind the passenger-side dash and glove compartment in compatible Polaris GENERAL 1000 two-seat or four-seat vehicles. The kit includes the enclosure, wire harness, amplifier bracket, mounting hardware, and plastic wire tie wraps; the subwoofer is not included. Rockford Fosgate specifies use with its GENERAL-specific RFGNRL-K8 amplifier wiring kit, and the enclosure is not compatible with RIDE COMMAND Edition or heater-equipped applications.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45643046617158,"sku":"RFGNRL-FWE","price":439.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61w-dc-9YhL.jpg?v=1784436406"},{"product_id":"rockford-fosgate-rfrngr-fwe-10-polaris-ranger-sub-enclosure","title":"Rockford Fosgate RFRNGR-FWE 10\" Polaris Ranger Sub Enclosure","description":"\u003cp\u003eThe Rockford Fosgate RFRNGR-FWE is a vehicle-specific front subwoofer enclosure engineered for select Polaris Ranger models. It provides a dedicated location for a single 10-inch subwoofer while preserving a clean, integrated appearance inside the vehicle. The enclosure is sold empty, allowing the system to be matched with a compatible subwoofer and amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for Ranger owners who want to add low-frequency output without using a generic box or sacrificing a large amount of cabin space. Its optimized sealed design supports controlled bass performance from compatible marine-grade Rockford Fosgate subwoofers. Once installed, the enclosure is designed to remain discreet under the passenger-side seat area.\u003c\/p\u003e\u003cp\u003eThe RFRNGR-FWE uses a roto-molded construction that is designed for lightweight, durable, seamless use in off-road environments. Its texture and color are matched to the vehicle interior for a more factory-integrated presentation. The enclosure is also Element Ready and carries an IPX6 water-intrusion rating for exposure to outdoor conditions.\u003c\/p\u003e\u003cp\u003eCompatible applications include select full-size Polaris Ranger 900, Ranger 1000, Ranger 900 Crew, and Ranger 1000 Crew models. It mounts beneath the passenger-side seat area, with a supplied bracket used when installing in applicable Crew models. Vehicle configuration, factory options, and model year should be verified before purchase.\u003c\/p\u003e\u003cp\u003eThe enclosure works as part of a larger Rockford Fosgate Ranger audio upgrade path. It is designed to work with Rockford Fosgate PM and RM series subwoofers and is intended to pair with an appropriate amplifier and source unit. Matching the selected subwoofer's impedance and power needs to the amplifier remains essential for proper system setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Sealed Enclosure:\u003c\/strong\u003e Provides a purpose-built sealed air space for a compatible 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Designed for select Polaris Ranger models rather than universal mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoto-Molded Construction:\u003c\/strong\u003e Uses a seamless molded design intended for lightweight durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStealth Under-Seat Placement:\u003c\/strong\u003e Mounts under the passenger-side seat area for an integrated installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Protection:\u003c\/strong\u003e Built for exposure to dust, UV, temperature changes, water, corrosion, and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Hole Mounting:\u003c\/strong\u003e Uses existing vehicle mounting points with minimal drilling required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RFRNGR-FWE has a black, texture-matched enclosure body designed to blend with the Ranger interior. Its roto-molded construction avoids conventional panel seams and is intended for powersports use. The enclosure is IPX6 water-intrusion rated and has been tested to ASTM B117 and D4329 standards.\u003c\/p\u003e\u003cp\u003eInstallation places the enclosure beneath the passenger-side seat after removing the applicable storage tray. The included harness routes forward beneath the floor and connects to the enclosure pigtail, while supplied tie wraps help secure the harness to the vehicle wiring. A compatible 10-inch Rockford Fosgate subwoofer, an appropriately matched amplifier, and correct polarity\/impedance wiring are required; professional installation is recommended if the installer is unsure.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45645214449734,"sku":"RFRNGR-FWE","price":439.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81cmGeHEMXL.jpg?v=1784437697"},{"product_id":"rockford-fosgate-rfyxz-fwe-10-front-subwoofer-enclosure","title":"Rockford Fosgate RFYXZ-FWE 10\" Front Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate RFYXZ-FWE is an unloaded, vehicle-specific front subwoofer enclosure for select Yamaha YXZ models. It provides a dedicated location for a single 10-inch subwoofer while preserving a clean, integrated appearance after the vehicle body panels are reinstalled. This enclosure is intended for Yamaha YXZ owners building a more complete off-road audio system.\u003c\/p\u003e\u003cp\u003eIts optimized sealed design is made for controlled low-frequency performance when paired with a compatible Rockford Fosgate subwoofer and appropriate amplification. A sealed enclosure can support focused bass response without requiring a separate custom box. The enclosure itself does not include a subwoofer or amplifier.\u003c\/p\u003e\u003cp\u003eThe RFYXZ-FWE is engineered around compatible Rockford Fosgate Prime marine 10-inch models, including the RM110D2, RM110D2B, RM110D4, and RM110D4B. This gives installers options to select the subwoofer voice-coil configuration that suits their amplifier and system wiring plan. Choose amplification and wiring based on the subwoofer installed, not the enclosure alone.\u003c\/p\u003e\u003cp\u003eFor off-road use, the enclosure uses compression-molded fiberglass-reinforced polymer with a UV-resistant finish. Its texture and color are matched to the Yamaha YXZ interior for a factory-style visual fit. Rockford Fosgate also identifies the enclosure as Element Ready, with IPX6 water-intrusion rating and ASTM B117 and D4329 testing.\u003c\/p\u003e\u003cp\u003eThe enclosure is designed to bolt into OEM mounting locations with minimal disassembly and modification. Once installed and covered by the vehicle panels, it maintains a discreet appearance rather than occupying an exposed cargo area. It can serve as the bass foundation for a Yamaha YXZ audio upgrade using compatible Rockford Fosgate source, amplifier, and speaker components.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer Fitment:\u003c\/strong\u003e Holds one compatible 10-inch Rockford Fosgate subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimized Sealed Design:\u003c\/strong\u003e Provides a dedicated sealed enclosure for bass-system installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Designed for select Yamaha YXZ models and interior locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Mounting Locations:\u003c\/strong\u003e Bolts into factory mounting holes for integrated placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant FRP Construction:\u003c\/strong\u003e Fiberglass-reinforced polymer construction supports outdoor motorsports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Protection:\u003c\/strong\u003e Built for exposure to dust, water, UV, vibration, and temperature changes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RFYXZ-FWE uses compression-molded fiberglass-reinforced polymer and a UV-resistant finish. Its black, interior-matched texture is intended to blend with the Yamaha YXZ cabin once the surrounding panels are returned to place. The enclosure is rated IPX6 for water intrusion and is associated with ASTM B117 and D4329 environmental testing.\u003c\/p\u003e\u003cp\u003eInstallation uses the supplied subwoofer harness, mounting hardware, wire tie wraps, and foam tape. The enclosure mounts through OEM vehicle mounting holes, though the installation procedure requires panel removal and may require minor modification. Disconnect the negative battery terminal before installation, follow the supplied instructions, and use an amplifier and wiring appropriate for the compatible subwoofer selected.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45646327119942,"sku":"RFYXZ-FWE","price":439.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81iLUgxgrVL.jpg?v=1784438360"},{"product_id":"rockford-fosgate-rngr18-fwe-10-ranger-subwoofer-enclosure","title":"Rockford Fosgate RNGR18-FWE 10\" Ranger Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate RNGR18-FWE is a vehicle-specific 10-inch subwoofer enclosure designed for select 2018+ Polaris Ranger models. It uses the under-seat location normally associated with the vehicle's 5-gallon-bucket emboss, helping add bass without occupying the cargo area. The enclosure is sold empty, allowing the system builder to select a compatible Rockford Fosgate Color Optix subwoofer separately.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for Ranger owners who want a cleaner, integrated bass upgrade than a universal box can provide. Its molded exterior is texture- and color-matched to complement the vehicle interior. It can mount under the front or rear passenger seat location, subject to confirmed vehicle compatibility.\u003c\/p\u003e\u003cp\u003eThe Gen-2 enclosure uses a vented design intended to provide stronger output than the earlier Gen-1 version. An included port cap lets the enclosure be configured as sealed for a tighter bass character. The cap is also intended for use when the UTV may be submerged.\u003c\/p\u003e\u003cp\u003eRockford Fosgate designed the RNGR18-FWE for use with 10-inch M1 and M2 Color Optix subwoofers, including specified M1D4 and M2D4 models. The enclosure accommodates one subwoofer with an 8.90-inch cutout and up to 4.23 inches of mounting depth. Since no subwoofer or amplifier is built in, power handling and final impedance depend on the separately selected subwoofer and amplifier.\u003c\/p\u003e\u003cp\u003eFor an integrated Ranger audio build, the RNGR18-FWE can be used as the bass enclosure within a Rockford Fosgate motorsports system. It includes a wiring harness and installation hardware to support vehicle-specific installation. Verify the Rockford Fosgate compatibility chart for the exact Ranger model, year, and seating configuration before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer Fitment:\u003c\/strong\u003e Accommodates one compatible 10-inch Rockford Fosgate Color Optix subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Or Sealed Operation:\u003c\/strong\u003e Use the included port cap for a sealed enclosure configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder-Seat Placement:\u003c\/strong\u003e Uses the Ranger's 5-gallon-bucket emboss location under a passenger seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Matched Finish:\u003c\/strong\u003e Texture and color are matched to the Ranger interior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Inhibited Construction:\u003c\/strong\u003e Molded Centrex plastic incorporates integrated UV inhibitors for outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Mounting:\u003c\/strong\u003e Bolts to factory mounting locations with only minimal drilling required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RNGR18-FWE uses a molded composite enclosure design with injection-molded Centrex plastic and integrated UV inhibitors. Its exterior is finished to coordinate with the vehicle interior, while the vented layout and removable port cap provide configuration flexibility. The enclosure is rated IPX6 for water intrusion and is part of Rockford Fosgate's Element Ready motorsports product family.\u003c\/p\u003e\u003cp\u003eInstall the enclosure only after confirming fitment for the specific Ranger model and seat location. Mount it using the supplied hardware and OEM mounting points, with minimal drilling required where applicable. A compatible 10-inch subwoofer, suitable amplifier, and system-level wiring or integration components are required separately; the enclosure package includes its dedicated wiring harness and mounting hardware.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45648776626246,"sku":"RNGR18-FWE","price":549.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/619KiURzqnL.jpg?v=1784439681"},{"product_id":"rockford-fosgate-rzr14-fwe-10-vented-subwoofer-enclosure","title":"Rockford Fosgate RZR14-FWE 10\" Vented Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate RZR14-FWE is a direct-fit, unloaded 10-inch subwoofer enclosure designed for select Polaris RZR vehicles. It creates a dedicated location for adding low-frequency output without using a conventional cargo-area enclosure. The enclosure installs beneath the passenger-side dash in place of the factory glove box for an integrated appearance.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for RZR owners building or expanding a Rockford Fosgate off-road audio system. It accepts compatible 10-inch Rockford Fosgate Element Ready subwoofers, which are sold separately. Its vehicle-specific shape helps retain a clean cabin layout while adding a purpose-built location for bass.\u003c\/p\u003e\u003cp\u003eThe RZR14-FWE uses a vented enclosure design to support stronger output than a sealed configuration in the intended application. A supplied vent cap lets the enclosure be closed when a tighter bass character is preferred or when additional water protection is needed. This gives the installer flexibility to match the setup to riding conditions and listening preferences.\u003c\/p\u003e\u003cp\u003eIts roto-molded composite construction is designed for lightweight, seamless durability in motorsports use. The enclosure is texture- and color-matched to blend with the RZR interior after the body panels are reinstalled. It is also Color Optix ready when used with compatible M1 or M2 Color Optix subwoofers and the appropriate lighting-control components.\u003c\/p\u003e\u003cp\u003eThe RZR14-FWE is a foundation component rather than a complete subwoofer system. A compatible 10-inch subwoofer, suitable amplifier, wiring, and source signal are required to produce bass. It can be used as part of Rockford Fosgate RZR audio-system upgrades that combine front speakers, amplification, source equipment, and optional Color Optix lighting control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Mounts in select Polaris RZR models beneath the passenger-side dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer Provision:\u003c\/strong\u003e Designed for compatible Rockford Fosgate 10-inch subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Alignment:\u003c\/strong\u003e Ported design supports louder bass output in the intended installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Vent Cap:\u003c\/strong\u003e Lets the port be closed for sealed operation or water-focused use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor Optix Ready:\u003c\/strong\u003e Supports compatible illuminated M1 and M2 subwoofer upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoto-Molded Construction:\u003c\/strong\u003e Lightweight seamless composite enclosure suits off-road vehicle environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses a roto-molded composite blend with a seamless form that is designed for motorsports durability. Its exterior texture and color are matched to complement the vehicle interior, while its under-dash location creates a discreet installed result. The vented design uses a 3-inch-diameter, 10-inch-long vent and can be converted to a sealed configuration with the included cap.\u003c\/p\u003e\u003cp\u003eInstallation uses the vehicle-specific enclosure location and OEM mounting points on compatible RZR models, replacing the factory glove box. Confirm vehicle fitment before purchase, especially if the vehicle has a Polaris heater option or is an RZR PRO model. Install a compatible 10-inch subwoofer, amplifier, wiring, and any desired Color Optix controller separately, and follow the applicable Rockford Fosgate installation instructions.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45650969362502,"sku":"RZR14-FWE","price":469.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71uCIMoP2UL.jpg?v=1784440834"},{"product_id":"rockford-fosgate-rzr19pxp-rss-10-rzr-pro-xp-rear-subwoofer","title":"Rockford Fosgate RZR19PXP-RSS 10\" RZR Pro XP Rear Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate RZR19PXP-RSS is a rear subwoofer add-on kit for select Polaris RZR Pro XP 4-seat models. It adds a second 10-inch M2 Series subwoofer to a compatible existing Rockford Fosgate aftermarket Pro XP Stage 4, 5, or 6 audio system. This kit is intended for riders who want to expand bass output without changing the vehicle-specific fit and finish of their current system.\u003c\/p\u003e\u003cp\u003eThe loaded rear enclosure uses an M2D4-10IB 10-inch dual-voice-coil subwoofer and is designed for under-seat placement. Its vented configuration supports strong low-frequency output for open-cabin UTV use. A supplied port cap can close the vent for a more sealed enclosure response or when submerging the vehicle.\u003c\/p\u003e\u003cp\u003eThis is a vehicle-specific solution rather than a universal subwoofer box. The enclosure is designed to integrate into select Pro XP 4-seat cabins without reducing passenger space. It is not a standalone powered subwoofer and requires a compatible external amplification setup.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's Element Ready construction is intended for powersports conditions involving water, dirt, mud, UV exposure, and vibration. The M2 subwoofer uses a mineral-filled polypropylene cone, UV-stable foam surround, and integrated weather-oriented connectivity. Color Optix RGB lighting is built into the included subwoofer for systems equipped with a compatible lighting controller.\u003c\/p\u003e\u003cp\u003eThe RZR19PXP-RSS is an upgrade-path product for an existing compatible Rockford Fosgate Pro XP audio package, including systems with or without Ride Command where listed for the vehicle. Its integrated harness and OEM mounting-point design are intended to simplify installation. Confirm the exact RZR Pro XP 4-seat trim, year, factory audio configuration, and existing Rockford Fosgate stage system before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary 10-Inch Bass:\u003c\/strong\u003e Adds a loaded M2 10-inch rear subwoofer to a compatible existing audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Enclosure:\u003c\/strong\u003e Fits select RZR Pro XP 4-seat models beneath the rear seat area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Or Sealed Operation:\u003c\/strong\u003e Use the included port cap to close the enclosure vent when needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-And-Play Harness:\u003c\/strong\u003e Uses an integral harness for compatible Rockford Fosgate Pro XP system connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Mounting Points:\u003c\/strong\u003e Designed to bolt into the vehicle without cutting or drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Built for exposure to off-road water, dirt, mud, UV, and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RZR19PXP-RSS includes the RZR19PXP-M2RWE loaded rear enclosure with an M2D4-10IB 10-inch subwoofer. The subwoofer uses a mineral-filled polypropylene cone, UV-stable foam surround, dual voice coils, and a weather-oriented Deutsch connector. The black enclosure is designed around the rear seating area of select four-seat RZR Pro XP models and includes mounting hardware plus grille or trim components.\u003c\/p\u003e\u003cp\u003eInstallation is intended only for a confirmed compatible RZR Pro XP 4-seat vehicle with the required Rockford Fosgate aftermarket Stage 4, 5, or 6 audio system already installed. Attach the enclosure at the OEM mounting locations and connect the integral harness to the compatible system; no cutting or drilling is intended for the prescribed application. Keep the vent open for the supplied vented configuration, or install the port cap when a sealed response or added protection during submersion is preferred.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45651932938310,"sku":"RZR19PXP-RSS","price":729.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51fgrOMWs3L.jpg?v=1784441374"},{"product_id":"rockford-fosgate-t1s-1x12-12-slim-sealed-subwoofer-enclosure","title":"Rockford Fosgate T1S-1X12 12\" Slim Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Rockford Fosgate T1S-1X12 is a loaded, sealed enclosure built around one 12-inch Power T1 slim subwoofer. It is designed for vehicles where conventional deep subwoofer boxes take up too much usable space. Its shallow wedge profile helps it fit behind truck seats and in other depth-limited cargo areas.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners who want a complete bass upgrade without selecting a separate subwoofer and box. The internal subwoofer is factory installed and the enclosure is prewired for a 1-ohm final load. Pair it with a compatible mono amplifier that is stable at 1 ohm and appropriately matched to its 600-watt RMS rating.\u003c\/p\u003e\u003cp\u003eThe sealed enclosure design is tuned for controlled bass response and integrates well with a wide range of music styles. Its specified frequency response is 27 to 250 Hz, supporting low-frequency extension while retaining upper-bass definition. The enclosure provides 0.85 cubic feet of internal air volume for the installed T1 slim driver.\u003c\/p\u003e\u003cp\u003eThe T1S-1X12 uses a shallow-mount T1S1-12 subwoofer with a 3-inch, four-layer voice coil and a neodymium motor structure. Rockford Fosgate's VAST surround design increases effective cone area, while its Integrated Copper Cap Heat Sinking shorting ring technology is designed to improve motor linearity and reduce distortion. These engineering elements allow a slim driver to deliver substantial excursion within a compact mounting profile.\u003c\/p\u003e\u003cp\u003eThe enclosure can serve as the bass foundation for a factory-radio upgrade or as part of a more complete aftermarket audio system. Quick-release input terminals simplify amplifier connection, and included mounting brackets help secure the enclosure in the vehicle. Its single 1-ohm configuration is especially suited to a mono amplifier designed to provide strong output at a 1-ohm load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes one factory-installed Power T1 slim subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Prewired for compatible 1-ohm-stable mono amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-Watt RMS Handling:\u003c\/strong\u003e Supports continuous amplifier power up to 600 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Cabinet:\u003c\/strong\u003e Provides shallow depth for space-conscious vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Mesh Grille:\u003c\/strong\u003e Helps guard the subwoofer against cargo-area damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-Release Terminals:\u003c\/strong\u003e Makes speaker-wire connection and service more convenient.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1S-1X12 enclosure uses 5\/8-inch medium-density fiberboard construction and a durable black carpet finish. It features stitched Rockford Fosgate and Diamond-R logos, along with a heavy-duty mesh grille over the subwoofer. The angled wedge cabinet measures 14.5 inches high by 31.5 inches wide, with depths of 4.2 and 6.3 inches.\u003c\/p\u003e\u003cp\u003eInstall the enclosure on a solid, flat vehicle surface and use the supplied hold-down brackets and screws to prevent movement while driving. Connect it only to an amplifier rated for a 1-ohm speaker load, then set gain and crossover controls carefully to avoid distortion. Confirm the available mounting width, height, and both enclosure depths before purchase, particularly for behind-seat truck installations.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45655530668102,"sku":"T1S-1X12","price":949.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71m1aov2wIL.jpg?v=1784443502"},{"product_id":"rockford-fosgate-t1sg-12-12-slim-subwoofer-grille","title":"Rockford Fosgate T1SG-12 12\" Slim Subwoofer Grille","description":"\u003cp\u003eThe Rockford Fosgate T1SG-12 is a protective 12-inch mesh grille made for select Power Series T1 slim subwoofers. It helps shield the subwoofer cone and surround from accidental contact in exposed vehicle installations. This is a passive accessory rather than a speaker, amplifier, or powered subwoofer.\u003c\/p\u003e\u003cp\u003eIt is intended for owners of compatible Rockford Fosgate T1 slimline 12-inch subwoofers who want added physical protection without changing their existing enclosure or electronics. The grille is designed to integrate with the subwoofer's removable trim ring. That makes it a practical addition for trunk, cargo-area, under-seat, and other exposed installations.\u003c\/p\u003e\u003cp\u003eBecause the T1SG-12 is a grille insert, it has no RMS power rating, impedance, or sound output of its own. Its role is physical protection for the moving cone and surround rather than altering the subwoofer's electrical performance. Use it with a properly installed compatible T1 slim subwoofer and its original trim ring.\u003c\/p\u003e\u003cp\u003eThe grille uses a stamped steel mesh construction with a black finish. Its formed profile is made to sit within the trim-ring arrangement used by compatible T1 slim models. Rockford Fosgate notes that the grille adds approximately one inch to the subwoofer's mounting height.\u003c\/p\u003e\u003cp\u003eFor a Power T1 slim subwoofer system, the T1SG-12 is an accessory upgrade that can be added after the subwoofer is installed. It is specifically listed for the T1S1-12 and T1S2-12 12-inch slim subwoofers. The package includes one grille, an owner's manual, and a mounting diagram printed on the back of the packaging.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Fitment:\u003c\/strong\u003e Designed for compatible 12-inch Power T1 slim subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Mesh:\u003c\/strong\u003e Provides a durable protective barrier over the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrim-Ring Integration:\u003c\/strong\u003e Installs within the subwoofer's removable trim-ring assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCone And Surround Protection:\u003c\/strong\u003e Helps reduce accidental contact with moving woofer parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Accessory:\u003c\/strong\u003e Adds approximately one inch to mounting height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Setup Reference:\u003c\/strong\u003e Packaging includes a rear mounting diagram for guidance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T1SG-12 uses black stamped metal mesh formed as a grille insert. Its design is intended to work with the factory-style removable trim ring on compatible Power T1 slim subwoofers. The steel mesh construction is intended to protect the exposed cone and surround from incidental impacts.\u003c\/p\u003e\u003cp\u003eInstallation involves removing the compatible subwoofer's existing trim ring, positioning the grille insert, and re-securing the trim ring. Confirm that the subwoofer is a T1S1-12 or T1S2-12 and allow for the approximately one-inch added mounting height before finalizing enclosure clearance. No wiring, power connection, or amplifier adjustment is required for this passive grille accessory.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45656469012550,"sku":"T1SG-12","price":44.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pNQvwd8KL.jpg?v=1784444221"}],"url":"https:\/\/audiowatt.store\/collections\/subwoofer-boxes-enclosures.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}