{"title":"Speakers","description":null,"products":[{"product_id":"soundxtreme-st-503-5-25-3-way-coaxial-speakers","title":"SoundXtreme ST-503 5.25\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe SoundXtreme ST-503 is a pair of 5.25-inch, 3-way coaxial car speakers intended as a replacement for factory-installed speakers. It provides a compact option for vehicles that use 5.25-inch speaker locations. The full-range coaxial layout keeps the woofer and high-frequency drivers together in each speaker assembly.\u003c\/p\u003e\u003cp\u003eThis set is suited to listeners looking to refresh an aging factory speaker system or build a basic replacement system around a compatible head unit or amplifier. Its 4-ohm impedance is the common nominal load used by many car-audio systems. Confirm the vehicle's opening size, mounting depth, and connector arrangement before ordering.\u003c\/p\u003e\u003cp\u003eThe ST-503 uses a 3-way design, combining a woofer section with integrated midrange and high-frequency reproduction. This arrangement is designed to cover a broad portion of the audible range from each mounting location. The published frequency response is 100 Hz to 20 kHz, so low bass below that range is better handled by a dedicated subwoofer when deeper bass is desired.\u003c\/p\u003e\u003cp\u003eA polypropylene mid-woofer cone and PEI dome tweeter are specified for the speaker system. The listed 20 mm voice coil and 5.3-ounce magnet are part of its compact coaxial construction. With an 88 dB sensitivity rating, output will depend on the source unit or amplifier power, installation quality, and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eRated for 320 watts peak power, the ST-503 is intended for everyday replacement-speaker use rather than as a standalone bass solution. It can be used with a factory radio or an aftermarket system that is compatible with 4-ohm speakers. For a balanced upgrade, pair it with clean amplification and properly fitted mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch Size:\u003c\/strong\u003e Fits applications designed for compact round speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Integrates multiple driver elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports common factory and aftermarket car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Peak Rating:\u003c\/strong\u003e Provides the published peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Mounting Depth:\u003c\/strong\u003e Helps with fitment planning behind the mounting surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST-503 uses a polypropylene mid-woofer cone, PEI dome tweeter, 20 mm voice coil, and 5.3-ounce magnet. Its full-range 3-way coaxial construction combines the driver elements in a single round speaker assembly. The listed outside diameter is 5.25 inches.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle accepts a 5.25-inch round speaker and has at least 2.5 inches of mounting clearance before installation. Verify factory mounting-hole alignment, terminal connection type, and any required adapters separately, as fitment hardware is vehicle-specific. Use two matching speakers as a left\/right pair and observe correct positive and negative polarity when wiring.\u003c\/p\u003e","brand":"SoundXtreme","offers":[{"title":"Default Title","offer_id":45613243301958,"sku":"ST-503","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81OXZUIcUdL.jpg?v=1784350558"},{"product_id":"audiobank-ad36tw-4-inch-super-tweeter-speaker","title":"Audio360 AD36TW 4-Inch Super Tweeter Speaker","description":"\u003cp\u003eThe AUDIO360 AD36TW is a 4-inch super tweeter designed to add high-frequency detail to a car-audio system. It is a 4-ohm speaker with a published frequency range of 2 kHz to 20 kHz. This makes it suited to systems that need a dedicated driver for upper-frequency reproduction alongside midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eWith a published sensitivity of 105 dB, the AD36TW is intended for applications where efficient high-frequency output is important. Its 1,800-watt maximum-power specification identifies it as a pro-car-audio-oriented component, while no RMS power rating is published. Match the speaker with compatible amplification and system tuning rather than selecting equipment from maximum-power figures alone.\u003c\/p\u003e\u003cp\u003eThe AD36TW uses a titanium diaphragm and a CCAW voice coil. Titanium is specified for the diaphragm material, while CCAW refers to copper-clad aluminum wire in the voice coil. These published construction details distinguish the driver from basic paper- or polymer-diaphragm tweeters.\u003c\/p\u003e\u003cp\u003eThis super tweeter is a practical choice for enthusiasts building a multi-driver setup that needs more presence in the upper frequencies. Its 4-ohm nominal impedance allows it to be considered for amplifiers or passive networks designed for 4-ohm speaker loads. The published 2 kHz to 20 kHz range provides a useful starting point when planning system crossover points.\u003c\/p\u003e\u003cp\u003eThe 12.3-ounce magnet specification supports the AD36TW's dedicated high-frequency-driver design. Use it as part of a properly configured car-audio system rather than as a full-range replacement speaker. Because published mounting measurements and included accessories are not available, confirm physical fitment and installation hardware before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Supports matching with compatible 4-ohm amplifier or crossover channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800W Maximum Power:\u003c\/strong\u003e Published maximum-power handling for pro-car-audio system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the rated speaker input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD36TW combines a titanium diaphragm, CCAW voice coil, and a published 12.3-ounce magnet. It is specified as a 4-inch tweeter with a 4-ohm nominal impedance. The design is focused on reproducing the upper portion of a multi-speaker car-audio system's frequency range.\u003c\/p\u003e\u003cp\u003eInstall the AD36TW only with equipment appropriate for a 4-ohm tweeter and configure the system so the speaker is used within its published 2 kHz to 20 kHz range. An appropriate crossover or high-pass arrangement should be selected as part of the overall system design; no crossover is specified as included. Verify available mounting depth, cutout requirements, wiring hardware, and package contents with the seller or installer before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613780926534,"sku":"AD36TW","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61UsGYKeH-L.jpg?v=1784350819"},{"product_id":"audio360-ad43tw-4-72-led-super-tweeter","title":"Audio360 AD43TW 4.72\" LED Super Tweeter","description":"\u003cp\u003eThe Audio360 AD43TW is a 4.72-inch super tweeter designed to add focused high-frequency output to car and marine audio systems. It is intended for listeners building systems that need more treble presence, detail, and projection than conventional full-range speakers alone provide. Its 4-ohm nominal impedance supports integration with appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eCovering a stated 2 kHz to 18 kHz frequency range, the AD43TW is built to reproduce the upper-frequency information that helps instruments, vocals, and percussion remain distinct in a high-output system. Its 106 dB sensitivity rating indicates efficient output from relatively modest amplifier power. The result is a forward, detailed high-frequency character suited to custom audio installations.\u003c\/p\u003e\u003cp\u003eThe AD43TW uses a phenolic diaphragm and a CCAW voice coil. This material combination is specified for durable operation and responsive high-frequency reproduction. A 16.9-ounce magnet supports the tweeter assembly for stable performance.\u003c\/p\u003e\u003cp\u003eFull LED lighting is integrated into the design, adding a visual element for installations where appearance is part of the build. The lighting offers different lighting options according to the product listing. This makes the AD43TW a practical fit for custom vehicle and marine setups that combine audio upgrades with illuminated trim.\u003c\/p\u003e\u003cp\u003eUse the AD43TW as part of a properly designed multi-speaker system, rather than as a replacement for midrange or bass drivers. Pair it with compatible amplification and suitable high-frequency filtering to keep the tweeter operating within its stated frequency range. Its compact 4.72-inch format can suit custom panels, pods, and other dedicated tweeter locations where installation space allows.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.72-Inch Super Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency output in a compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W Maximum Power:\u003c\/strong\u003e Provides stated peak power-handling capacity for high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports use with compatible car or marine amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps produce efficient and prominent treble output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Provides the specified durable diaphragm construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull LED Lighting:\u003c\/strong\u003e Adds illuminated styling with different lighting options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD43TW combines a phenolic diaphragm, CCAW voice coil, and 16.9-ounce magnet in a compact super-tweeter design. Its full LED treatment gives it a distinct appearance for visible custom installations. The product is specified for car and marine audio use.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting space before installation; the product is listed as 4.72 inches, while the overall packaged\/product dimensions are listed as 5 x 5 x 5 inches. Connect it only to an amplifier configuration compatible with a 4-ohm speaker load, and use appropriate crossover or high-pass protection for a super tweeter. Plan LED wiring separately from speaker wiring and follow the supplied product instructions where available.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613830504518,"sku":"AD43TW","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61G2qkQsifL.jpg?v=1784350841"},{"product_id":"audiobank-ad44tw-3-93-super-tweeter-speakers","title":"Audio360 AD44TW 3.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Audio360 AD44TW is a 3.93-inch super tweeter pair designed to add dedicated high-frequency output to a car-audio system. It is suited to builds that need more presence and detail in the upper-frequency range than full-range speakers alone can provide. With a 4-ohm nominal impedance, the pair is intended for use in wired automotive audio installations.\u003c\/p\u003e\u003cp\u003eEach AD44TW is rated for up to 2200 watts maximum power, for a listed 4400-watt total maximum power rating for the pair. Its 106 dB sensitivity specification supports strong output from comparatively modest amplifier power when the system is set up correctly. The stated 1.5 kHz to 20 kHz frequency range focuses this driver on upper midrange and treble reproduction.\u003c\/p\u003e\u003cp\u003eA PEI diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAR. This material combination is intended to support consistent high-frequency reproduction in a car-audio environment. The 13-ounce magnet specification contributes to the driver assembly's structure and stability.\u003c\/p\u003e\u003cp\u003eThe AD44TW is a practical choice for enthusiasts building a louder, more detailed multi-speaker system. It can complement dedicated midrange drivers, coaxial speakers, and a properly configured amplifier system. Because it is a super tweeter, it is best used as part of a frequency-managed setup rather than as a stand-alone full-range speaker.\u003c\/p\u003e\u003cp\u003eFor a matched left-and-right installation, this listing includes two AD44TW super tweeters. Their compact 3.93-inch size can suit custom panels, doors, pillars, or other suitable locations when adequate mounting space is available. Final output and tonal balance depend on proper crossover selection, amplifier matching, and careful level setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.93-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2200W Maximum Per Tweeter:\u003c\/strong\u003e Supports high-output system planning when properly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps the tweeters produce strong output efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Ounce Magnet:\u003c\/strong\u003e Adds mass to the driver motor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD44TW uses a PEI diaphragm and a CCAR voice coil in a compact super-tweeter format. Each driver is specified with a 13-ounce magnet and a 3.93-inch speaker size. The black, wired design is intended for automotive audio use.\u003c\/p\u003e\u003cp\u003eInstall the pair in a secure location with appropriate clearance for the mounting arrangement and wiring. Use a suitable high-pass crossover or other frequency-management method to keep low-frequency content out of the tweeters, and match the amplifier and crossover to the 4-ohm load. Confirm polarity between left and right speakers, then set gain conservatively to integrate their output with the rest of the system.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613888274502,"sku":"AD44TW","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71q0Do52zVL.jpg?v=1784350865"},{"product_id":"audio360-ad48tw-5-49-super-tweeter","title":"Audio360 AD48TW 5.49\" Super Tweeter","description":"\u003cp\u003eThe Audio360 AD48TW is a high-frequency super tweeter designed to add upper-range detail to a car or marine audio system. It is intended for listeners building systems that need dedicated treble reproduction beyond what larger speakers or subwoofers provide. The requested configuration includes two AD48TW tweeters for left- and right-channel use.\u003c\/p\u003e\u003cp\u003eEach AD48TW is rated at 4 ohms and listed with 2,500 watts maximum power handling, for 5,000 watts total maximum handling across the pair. Its 107 dB sensitivity rating indicates efficient output from comparatively modest amplifier power. The stated 2 kHz to 20 kHz frequency range focuses the driver on upper-midrange and high-frequency duties.\u003c\/p\u003e\u003cp\u003eA phenolic diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are part of the driver design specified for this model. A 15.2-ounce magnet is also listed for each tweeter.\u003c\/p\u003e\u003cp\u003eThe AD48TW is suited to systems using separate low-, mid-, and high-frequency drivers rather than as a replacement for a full-range speaker. It can complement midrange speakers and subwoofers by handling the upper portion of the audible frequency range. Its wired connection format makes it appropriate for conventional amplified car-audio speaker wiring.\u003c\/p\u003e\u003cp\u003eThis model is listed for car and marine audio applications, giving installers flexibility when selecting a high-frequency driver for a vehicle or boat system. Proper system matching remains important because the 4-ohm load must be compatible with the amplifier channel and crossover arrangement. The product is listed as a super tweeter, so it should be integrated as part of a multi-driver system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Tweeter Design:\u003c\/strong\u003e Adds dedicated high-frequency output to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifier channels designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with appropriate system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers upper-midrange and treble frequencies specified for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Uses the specified phenolic material for the diaphragm assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD48TW uses a phenolic diaphragm, CCAW voice coil, and a listed 15.2-ounce magnet. Its published overall size is 5.49 by 4.72 inches, placing it in the large-format super-tweeter category. The model is specified as a wired dynamic-driver tweeter for automotive and marine-oriented audio applications.\u003c\/p\u003e\u003cp\u003eMount the pair where their high-frequency output can be directed toward the listening area and where the 5.49 by 4.72-inch footprint can be accommodated. Connect each tweeter to an amplifier or speaker circuit compatible with a 4-ohm load, and use an appropriate crossover or high-pass arrangement so the driver operates within its listed 2 kHz to 20 kHz frequency range. Confirm available mounting clearance and system wiring before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613945684038,"sku":"AD48TW","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61FX_9_-5SL.jpg?v=1784350890"},{"product_id":"audio360-ad6510p-6-5-4-way-coaxial-car-speakers","title":"Audio360 AD6510P 6.5\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Audio360 AD6510P is a 6.5-inch 4-way coaxial car speaker designed for vehicle audio upgrades where space and straightforward fitment matter. Its compact format is suited to many door-panel, rear-deck, and custom speaker locations that accept a 6.5-inch driver. It is intended for listeners who want to replace factory speakers or build out an aftermarket sound system.\u003c\/p\u003e\u003cp\u003eThis model combines a 4-way coaxial layout with a 4-ohm nominal impedance for use with compatible aftermarket head units and amplifiers. The 92 dB sensitivity rating supports efficient output from modest-power sources while remaining suitable for amplified systems. Its sound character is aimed at strong midbass presence and clear everyday playback.\u003c\/p\u003e\u003cp\u003eThe AD6510P is rated at 650 watts maximum power and 325 watts RMS per speaker. These published ratings make proper amplifier gain setting especially important for reliable operation. Match the system carefully and avoid driving the speakers into audible distortion.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber edge form the core of the speaker's woofer assembly. This material combination is designed to provide a durable moving surface while helping control cone movement. The coaxial construction keeps the multi-driver arrangement in a single speaker location, which can simplify an upgrade where separate tweeter mounting is not planned.\u003c\/p\u003e\u003cp\u003eWith a stated 2.76-inch mounting depth and 5.63-inch cutout diameter, the AD6510P can be considered for installations with limited rear clearance. Verify the vehicle's factory opening, available depth, mounting-hole pattern, and window or mechanism clearance before purchase. It can serve as part of a front- or rear-speaker upgrade when paired with compatible wiring and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits many common vehicle speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Design:\u003c\/strong\u003e Combines multiple drivers into one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides published headroom for compatible amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Helps guide amplifier matching and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output with compatible source power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket head units and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6510P uses an injection-molded cone with a rubber edge for a durable speaker assembly. Its 4-way coaxial design places the speaker elements together in a compact footprint. This makes it practical for installations that do not have separate locations for dedicated tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle supports a 5.63-inch cutout and at least 2.76 inches of mounting depth before installation. Use appropriate vehicle-specific brackets or adapters when required, and check clearance behind the speaker before fastening it in place. For amplified use, set gains conservatively and use compatible 4-ohm-capable equipment.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614092386374,"sku":"AD6510P","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FgnYTL49L.jpg?v=1784358286"},{"product_id":"audio360-ad6915p-6x9-4-way-coaxial-car-speakers","title":"AUDIO360 AD6915P 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe AUDIO360 AD6915P is a 6x9-inch 4-way coaxial car speaker designed for factory-location upgrades in vehicles with compatible 6x9 mounting positions. It provides an all-in-one speaker configuration for replacing worn or underperforming door or rear-deck speakers. Its 4-ohm design supports use with many aftermarket head units and amplifiers.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want fuller output and stronger midbass from a factory-sized speaker location. The stated 92 dB sensitivity helps it produce substantial output from available amplifier power. It is suited to everyday listening systems as well as custom car-audio installations using 6x9 speaker locations.\u003c\/p\u003e\u003cp\u003eThe AD6915P is rated at 1000 watts maximum power and 500 watts RMS. Proper power matching remains important, so amplifier output and gain settings should be selected carefully for the speaker system. A compatible amplifier can help provide controlled output when higher volume is desired.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber surround form the speaker's primary moving assembly. This construction is intended to support cone control and durability during regular vehicle use. The coaxial layout places multiple drivers within the 6x9 speaker format for broad sound coverage from a single mounting location.\u003c\/p\u003e\u003cp\u003eWith a 3.54-inch mounting depth and an 8.58 x 5.87-inch cutout requirement, the AD6915P should be measured against the vehicle's available space before purchase. It can be used in compatible doors, rear decks, or custom panels. Vehicle-specific mounting adapters, wiring harnesses, or hardware may be needed depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible factory-size speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides stated high-output power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket radios and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6915P uses an injection-molded cone with a rubber surround. These materials are specified to support cone control and long-term durability. Its 4-way coaxial construction consolidates the speaker elements into a single 6x9-inch assembly.\u003c\/p\u003e\u003cp\u003eConfirm both the 3.54-inch mounting depth and 8.58 x 5.87-inch cutout dimensions against the intended location before installation. Use vehicle-appropriate brackets, wiring adapters, and mounting hardware where required; their inclusion is not confirmed. For amplified systems, match the amplifier configuration to the 4-ohm speaker load and set gains conservatively.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614093959238,"sku":"AD6915P","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81C2zDpDq9L.jpg?v=1784358325"},{"product_id":"audio360-ads6525m-6-5-dual-voice-coil-midrange-speaker","title":"AUDIO360 ADS6525M 6.5\" Dual Voice Coil Midrange Speaker","description":"\u003cp\u003eThe AUDIO360 ADS6525M is a 6.5-inch car-audio midrange speaker designed to bring vocal and instrumental detail into a custom vehicle sound system. It is intended for listeners building or upgrading systems that need dedicated midrange output rather than a full-range replacement speaker. Its compact 6.5-inch format supports use in many door-panel and custom-pod applications where a focused midrange driver is desired.\u003c\/p\u003e\u003cp\u003eWith 325 watts RMS power handling and 650 watts maximum power handling, the ADS6525M is made for amplified car-audio setups with appropriate power matching. The driver is positioned for clear, assertive midrange reproduction at higher listening levels. Matching amplifier output carefully to the RMS rating is the practical way to use its stated power capability.\u003c\/p\u003e\u003cp\u003eA dual voice coil design with a stated 4-ohm configuration provides wiring flexibility when planning a multi-speaker installation. This can be useful in systems where the amplifier, speaker count, and final load need to be considered together. Confirm the final wiring load with the amplifier manufacturer before installation.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black press-paper cone and cloth-edge suspension. This combination is specified to keep the moving assembly lightweight while supporting controlled midrange reproduction. An oversized motor structure is also part of the driver design for its intended high-output car-audio role.\u003c\/p\u003e\u003cp\u003eA robust steel basket provides the mounting structure for the ADS6525M. The speaker is suited to door panels, custom speaker pods, and performance-oriented car-audio builds where a dedicated midrange driver is part of the system plan. Because it is a midrange speaker, system design should account for the other drivers and crossover strategy needed for the desired overall frequency coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched amplified system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides a stated short-term maximum power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Format:\u003c\/strong\u003e Fits applications designed for a 6.5-inch driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coil Design:\u003c\/strong\u003e Offers flexibility when planning speaker wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Paper Cone:\u003c\/strong\u003e Uses a lightweight black paper-cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket Structure:\u003c\/strong\u003e Provides a robust frame for mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS6525M combines a black press-paper cone, cloth-edge suspension, oversized motor structure, and steel basket. These confirmed construction elements support its role as a dedicated midrange driver in a vehicle audio system. The speaker is finished in black.\u003c\/p\u003e\u003cp\u003eVerify vehicle mounting clearance, mounting-hole dimensions, and electrical compatibility before ordering, as cutout and mounting-depth measurements are not confirmed. The speaker is described for door panels, custom pods, and competition-oriented systems; use wiring appropriate for its dual voice coil configuration and confirm the final impedance load against the amplifier's specifications. For a balanced system, plan the remaining frequency ranges with compatible drivers and suitable crossover settings.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614101332038,"sku":"ADS6525M (MIDRANGE)","price":28.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71cC_WIyWzL.jpg?v=1784358638"},{"product_id":"audiotek-at-spw10ga-25rg-10-gauge-25-ft-speaker-wire","title":"Audiotek AT-SPW10GA\/25RG 10-Gauge 25-Ft Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW10GA\/25RG is a 25-foot roll of 10-gauge speaker wire for connecting speakers in vehicle, mobile, marine, UTV, and home audio installations. Its heavy-gauge design gives installers a substantial cable option for audio-system wiring where equipment and terminals accept 10 AWG conductors. It is intended for custom wiring projects rather than as a plug-and-play terminated cable.\u003c\/p\u003e\u003cp\u003eThis cable is suited to installers replacing damaged speaker wiring, building a custom system, or routing new wire to speakers. The 25-foot length can be cut to suit the layout of an individual installation. Because it is supplied as bulk cable, the final routing and termination can be matched to the vehicle or audio-system design.\u003c\/p\u003e\u003cp\u003eA flexible multi-strand construction helps the cable bend and twist around interior panels, enclosures, and other installation obstacles. The listed 469-strand count supports its high-strand design. An ultra-flat profile is also specified to help with routing through tighter spaces.\u003c\/p\u003e\u003cp\u003eThe clear, glossy jacket is designed to insulate the cable while maintaining flexibility. Audiotek lists resistance to heat, oil, chemicals, and abrasion, with a stated operating-temperature range of -40 to 105°C. Soft PVC insulation adds protection for installed runs in demanding mobile-audio environments.\u003c\/p\u003e\u003cp\u003eUse the AT-SPW10GA\/25RG as part of a complete speaker connection path between compatible amplifiers, crossovers, and speakers. It can support custom car-audio, home-audio, marine, UTV, and other mobile-audio wiring projects. Select compatible terminals, connectors, and routing protection separately based on the equipment and installation location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Gauge Cable:\u003c\/strong\u003e Provides a heavy-gauge speaker-wire option for compatible audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Roll:\u003c\/strong\u003e Gives installers cut-to-length flexibility for custom wire routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e469-Strand Construction:\u003c\/strong\u003e Uses a high strand count to support cable flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Glossy Jacket:\u003c\/strong\u003e Insulates the cable while maintaining a clean installation appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft PVC Insulation:\u003c\/strong\u003e Helps the cable bend more easily during routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Resistance:\u003c\/strong\u003e Listed jacket resists heat, oil, chemicals, and abrasion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-SPW10GA\/25RG uses a clear coated jacket over finely stranded cable construction. Its flexible, ultra-flat design is intended to make routing more manageable in confined areas. The jacket is specified for heat, oil, chemical, and abrasion resistance, with a listed temperature range of -40 to 105°C.\u003c\/p\u003e\u003cp\u003eMeasure the intended route before cutting so the 25-foot roll is allocated appropriately between speakers and audio components. Confirm that the amplifier, crossover, speaker terminals, and any connectors used can accept 10-gauge wire. Route the cable away from moving parts, sharp edges, and excessive heat, and use suitable protection where the cable passes through panels or other potentially abrasive areas.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614199046214,"sku":"AT-SPW10GA\/25RG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81AQHeu5TML.jpg?v=1784360564"},{"product_id":"audiotek-at-spw10ga-50rg-10-gauge-50-ft-speaker-wire","title":"Audiotek AT-SPW10GA\/50RG 10-Gauge 50-Ft Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW10GA\/50RG is a 50-foot roll of 10-gauge speaker wire for routing speaker-level audio signals in vehicle and home audio installations. It provides bulk cable for replacing damaged runs, building custom-length leads, or wiring speakers during a new system installation. The 10-gauge format is intended for applications where a heavier speaker cable is desired.\u003c\/p\u003e\u003cp\u003eThis cable is suited to installers and DIY users assembling car stereo, mobile-audio, or home-theater speaker connections. Its 50-foot length offers material for several shorter runs or one longer routing path, depending on the layout. Cut the wire to the lengths needed for the installation rather than working around fixed pre-terminated cables.\u003c\/p\u003e\u003cp\u003eThe AT-SPW10GA\/50RG uses copper-clad aluminum conductors in a multi-strand construction. This design is made to provide a flexible cable for audio wiring while keeping the cable practical for general installation use. Properly matched speaker wire helps carry the amplified signal from an amplifier or receiver to connected speakers.\u003c\/p\u003e\u003cp\u003eA transparent, flexible outer jacket surrounds the conductors and helps protect the cable during routing. The jacket is specified to resist heat, oil, and abrasion, which is useful when wire must be routed through vehicle interiors, panels, or other active installation areas. Its clear finish also makes the cable easy to identify within an audio wiring layout.\u003c\/p\u003e\u003cp\u003eUse this speaker wire as part of a complete audio upgrade with compatible speakers, an amplifier or receiver, and suitable terminations. Plan the route before cutting cable, leave enough slack for service, and keep speaker wiring away from potential pinch points. The cable is appropriate for custom car-audio wiring as well as compatible home audio speaker connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Gauge Wire:\u003c\/strong\u003e Provides a heavier-gauge speaker cable option for custom audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot Roll:\u003c\/strong\u003e Supplies bulk cable that can be cut to installation-specific lengths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCA Conductors:\u003c\/strong\u003e Copper-clad aluminum construction balances conductivity and material efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Strand Construction:\u003c\/strong\u003e Supports flexibility when routing cable through an installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparent Jacket:\u003c\/strong\u003e Makes the cable easy to identify in a wiring layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Outer Jacket:\u003c\/strong\u003e Designed to resist heat, oil, and abrasion during use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-SPW10GA\/50RG combines multi-strand copper-clad aluminum conductors with a heavy-duty transparent jacket. Its flexible jacket is designed for routing in automotive and home audio environments where cable may encounter heat, oil, abrasion, and normal installation handling. The clear exterior gives the cable a straightforward, utility-focused appearance.\u003c\/p\u003e\u003cp\u003eMeasure each route before cutting the 50-foot roll, then strip and terminate the ends with connectors or speaker terminals suitable for the connected equipment. Route the wire carefully through protected areas and avoid sharp edges, moving parts, high-heat locations, and pinch points. Confirm amplifier or receiver compatibility with the connected speakers and use appropriate polarity at both ends of every speaker run.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614199799878,"sku":"AT-SPW10GA\/50RG","price":16.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81AQHeu5TML_7291692b-18b2-4640-ae83-51ac80c4ed43.jpg?v=1784360595"},{"product_id":"audiotek-at-spw14ga-100rg-100-foot-14-gauge-speaker-wire","title":"Audiotek AT-SPW14GA\/100RG 100-Foot 14-Gauge Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW14GA\/100RG is a 100-foot roll of 14-gauge speaker wire for vehicle audio wiring projects. It provides bulk cable for connecting compatible speakers to an amplifier or receiver speaker output. The long roll format is useful when custom-length runs are needed throughout a vehicle.\u003c\/p\u003e\u003cp\u003eThis speaker wire is intended for installers and do-it-yourself users replacing factory speaker wiring or building a custom car audio system. Its 14-gauge size offers a substantial conductor size for speaker connections where a heavier cable is desired. Cut the cable to the required length for each speaker location during installation.\u003c\/p\u003e\u003cp\u003eThe cable uses oxygen-free wire construction as listed for this model. This construction is paired with a clear PVC outer design that makes the cable's internal conductor colors visible. Red and clear wires help distinguish the two sides of the speaker connection.\u003c\/p\u003e\u003cp\u003eClear PVC insulation gives the cable a clean, straightforward appearance for visible or concealed routing. The contrasting conductor colors can help maintain consistent polarity while making multiple speaker runs. Properly matching positive and negative connections at both ends of every run is important for a correctly wired speaker system.\u003c\/p\u003e\u003cp\u003eThe AT-SPW14GA\/100RG fits into a car audio upgrade as connection wire between compatible speakers and their amplifier or receiver. It can be measured and cut for door speakers, rear speakers, or other speaker locations as the installation requires. Speaker terminals, connectors, tools, and other installation hardware should be selected separately for the specific vehicle and audio equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Foot Roll:\u003c\/strong\u003e Provides bulk cable for multiple custom speaker-wire runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-Gauge Wire:\u003c\/strong\u003e Uses 14-gauge speaker cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen-Free Construction:\u003c\/strong\u003e Listed with oxygen-free wire material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear PVC Design:\u003c\/strong\u003e Uses clear PVC outer insulation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed And Clear Wires:\u003c\/strong\u003e Helps visually distinguish the cable conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar Audio Use:\u003c\/strong\u003e Designed as speaker wire for vehicle audio installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Audiotek AT-SPW14GA\/100RG uses a clear PVC design with red and clear internal wires. Its 14-gauge format is supplied on a 100-foot roll for measured, custom-length installation. The clear jacket and contrasting wire colors support straightforward visual identification while routing cable.\u003c\/p\u003e\u003cp\u003ePlan each speaker run before cutting the wire and leave suitable length for routing and termination. Connect each conductor consistently from the amplifier or receiver speaker output to the corresponding speaker terminal. Select compatible terminals, connectors, protective routing materials, and installation tools separately as needed for the vehicle and equipment.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614200062022,"sku":"AT-SPW14GA\/100RG","price":19.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81izeUW7QVL.jpg?v=1784360620"},{"product_id":"audiotek-at-spw16ga-100rg-16-gauge-100-ft-speaker-wire","title":"Audiotek AT-SPW16GA\/100RG 16-Gauge 100-Ft Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW16GA\/100RG is a 100-foot roll of 16-gauge speaker wire for running audio signals between amplifiers or receivers and speakers. It provides bulk cable for installations where factory wiring is being replaced, extended, or routed to new speaker locations. The red and clear conductors help identify polarity during installation.\u003c\/p\u003e\u003cp\u003eThis wire is intended for vehicle speaker wiring and can also be used for compatible home audio speaker connections. Its 100-foot length gives installers flexibility for multi-speaker layouts, longer vehicle runs, and custom routing. It is supplied as un-terminated cable, allowing the installer to cut each run to the required length.\u003c\/p\u003e\u003cp\u003eWith a 16 AWG rating, the AT-SPW16GA\/100RG is sized for general speaker-level signal wiring. Correct wire selection depends on the length of the run, speaker load, and amplifier or receiver requirements. Using clearly identified positive and negative conductors supports consistent speaker polarity throughout the system.\u003c\/p\u003e\u003cp\u003eThe cable uses a clear PVC jacket with red and clear internal conductors. The jacket is described as flexible and resistant to heat, oil, and abrasion for routing through automotive interiors and other installation environments. Its multi-strand construction is designed to make the cable easier to handle than a solid-core speaker wire.\u003c\/p\u003e\u003cp\u003eThe AT-SPW16GA\/100RG fits into a car-audio upgrade as the connection path between an aftermarket head unit or amplifier and the speakers. It can be used when adding replacement door speakers, component systems, rear-fill speakers, or a separate amplified speaker stage. Match the installation method and termination hardware to the equipment being connected.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-Gauge Wire:\u003c\/strong\u003e Provides a dedicated speaker-wire size for general audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Foot Length:\u003c\/strong\u003e Supports custom-cut runs across larger installation areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed\/Clear Conductors:\u003c\/strong\u003e Helps identify polarity while wiring speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear PVC Jacket:\u003c\/strong\u003e Protects the paired conductors during routing and handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Strand Construction:\u003c\/strong\u003e Supports flexible routing through vehicle interiors and panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCA Conductor Design:\u003c\/strong\u003e Uses copper-clad aluminum conductors for audio wiring applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-SPW16GA\/100RG uses paired red and clear conductors inside a transparent PVC outer jacket. The jacket is described as durable, flexible, and resistant to heat, oil, and abrasion. This design keeps the cable identifiable during routing while helping protect the conductors from normal installation wear.\u003c\/p\u003e\u003cp\u003eMeasure each speaker run before cutting and leave enough length for service access and clean routing. Keep positive and negative connections consistent from the source to each speaker, using the red\/clear conductor identification as your reference. Select terminals, adapters, loom, and mounting hardware separately as needed for the vehicle and equipment.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614200455238,"sku":"AT-SPW16GA\/100RG","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81AQHeu5TML_18b74b1d-a75d-4753-b549-ab7f24743393.jpg?v=1784360658"},{"product_id":"audiotek-at-spw16ga-770rg-16-gauge-770-ft-speaker-wire","title":"Audiotek AT-SPW16GA\/770RG 16 Gauge 770 Ft Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW16GA\/770RG is a 16-gauge speaker cable supplied in a 770-foot length for audio-system wiring projects. It is intended for professional speaker applications where a substantial bulk length is useful for running cable to multiple speakers. The long format supports custom installation work without relying on several short wire sections.\u003c\/p\u003e\u003cp\u003eThis cable is suited to installers, system builders, and users creating custom speaker leads for vehicle or other audio applications. Its 16-gauge construction provides a defined wire size for planning speaker runs and termination hardware. The 770-foot quantity is particularly practical for larger projects, repeat installations, or stocking a shop's cable supply.\u003c\/p\u003e\u003cp\u003eAudiotek specifies stranded copper conductors, a construction chosen for flexibility and coilability during handling. The cable uses a thick, durable, flexible rubber outer jacket to help it route through an installation environment. This combination is designed around speaker-level signal distribution rather than low-current shielded microphone-cable use.\u003c\/p\u003e\u003cp\u003eThe AT-SPW16GA\/770RG is intended for high-current audio applications, including connections in loudspeaker and amplifier systems. Its speaker-cable format makes it appropriate for creating the wire paths between an amplifier or receiver and compatible passive speakers. Select the final run length and termination method to suit the requirements of the individual system.\u003c\/p\u003e\u003cp\u003eFor an upgrade or new-build audio system, this bulk cable provides a common wiring foundation before speakers, amplifiers, terminals, and connectors are installed. It can be cut to project-specific lengths, helping keep runs organized and appropriately sized for the layout. Use compatible speaker terminals or connectors as required by the equipment being connected.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-Gauge Cable:\u003c\/strong\u003e Provides a defined speaker-wire size for system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e770-Foot Length:\u003c\/strong\u003e Supports extensive custom wiring and multiple installation runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStranded Copper Conductors:\u003c\/strong\u003e Promote flexibility and convenient cable handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Outer Jacket:\u003c\/strong\u003e Adds durable, flexible exterior protection for routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProfessional Speaker Use:\u003c\/strong\u003e Designed for professional speaker-application wiring projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Audio Design:\u003c\/strong\u003e Intended for amplifier and loudspeaker connection environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-SPW16GA\/770RG combines stranded copper conductors with a thick, durable, flexible rubber outer jacket. This construction is designed to make the cable coilable and manageable while providing a protected exterior for custom audio installations. The cable is specified as 16 gauge and is supplied in a 770-foot quantity.\u003c\/p\u003e\u003cp\u003eMeasure each speaker run before cutting the cable, then use terminals or connectors that match the amplifier, receiver, and speaker connections in the system. Route the wire carefully, avoid pinch points and sharp edges, and maintain consistent polarity at every speaker connection. This cable is intended for speaker-level wiring in high-current audio applications, not as a replacement for shielded low-current microphone cable.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614200684614,"sku":"AT-SPW16GA\/770RG","price":116.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71wIWaUjjzL.jpg?v=1784360691"},{"product_id":"audiotek-at-spw18ga-770rg-18-gauge-770-foot-speaker-wire","title":"Audiotek AT-SPW18GA\/770RG 18-Gauge 770-Foot Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW18GA\/770RG is a bulk roll of 18-gauge speaker wire for building or replacing speaker-level audio connections. Its 770-foot length provides ample cable for larger vehicle installations, multiple-speaker systems, and custom wiring projects. It is intended for installers and enthusiasts who need wire supplied in one continuous bulk package.\u003c\/p\u003e\u003cp\u003eThis speaker cable is designed for audio-system wiring between an amplifier or receiver and compatible speakers. The 18-gauge format is suited to organized speaker runs where the system design calls for this wire size. It can be used when creating new speaker leads or replacing existing wiring during an upgrade.\u003c\/p\u003e\u003cp\u003eThe AT-SPW18GA\/770RG is listed with oxygen-free construction and stranded conductors. Stranded wire is flexible for routing through typical installation paths and for forming custom cable lengths. The cable is described for professional speaker applications and custom speaker-cable building.\u003c\/p\u003e\u003cp\u003eA durable, flexible rubber outer jacket helps protect the internal conductors during handling and routing. The jacketed construction supports cleaner cable management compared with loose conductor wire. Cut the required length from the roll to suit the layout of each speaker connection.\u003c\/p\u003e\u003cp\u003eThis Audiotek bulk wire is a practical component for car audio and other speaker-cable projects requiring long runs of 18-gauge wire. Pair it with appropriately sized speaker terminals, connectors, or other termination hardware selected for the installation. Verify the wire gauge, cable length, routing plan, and amplifier-to-speaker requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Gauge Wire:\u003c\/strong\u003e Provides an 18 AWG speaker-cable format for compatible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e770-Foot Bulk Roll:\u003c\/strong\u003e Supplies long-length wire for extensive custom wiring projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen-Free Construction:\u003c\/strong\u003e Listed with oxygen-free material construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStranded Conductors:\u003c\/strong\u003e Supports flexible handling when routing and terminating cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Outer Jacket:\u003c\/strong\u003e Features a thick, durable flexible rubber outer jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker Application:\u003c\/strong\u003e Intended for speaker connections and custom audio cable building.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-SPW18GA\/770RG uses stranded conductors inside a thick, durable flexible rubber outer jacket. This construction is designed for handling and routing as part of a speaker-wiring installation. The product is supplied as a 770-foot bulk roll rather than pre-terminated speaker cables.\u003c\/p\u003e\u003cp\u003eMeasure each planned speaker run before cutting cable and leave appropriate service length for routing and termination. Use connectors or terminals that match the equipment and installation method, and follow the amplifier, receiver, and speaker manufacturers' wiring guidance. Confirm that 18-gauge wire is appropriate for the required run length and system design.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614201012294,"sku":"AT-SPW18GA\/770RG","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71AY65H4Y2L.jpg?v=1784360725"},{"product_id":"audiotek-atw460bk-1-600w-titanium-super-tweeter","title":"Audiotek ATW460BK 1\" 600W Titanium Super Tweeter","description":"\u003cp\u003eThe Audiotek ATW460BK is a 1-inch car-audio super tweeter designed to add upper-frequency output to an amplified speaker system. It is intended for listeners who want more definition and projection from vocals, percussion, and other high-frequency details than typical factory speakers provide. Its 8-ohm impedance makes it important to match the tweeter with compatible amplification and system wiring.\u003c\/p\u003e\u003cp\u003eThis is a dedicated high-frequency driver rather than a full-range speaker or a direct replacement for a complete door-speaker system. The rated frequency response begins at 3,000 Hz and extends to 25,000 Hz, supporting use above midrange drivers or woofers. A built-in capacitor filter is specified to help limit low-frequency content sent to the tweeter.\u003c\/p\u003e\u003cp\u003eThe ATW460BK is specified with a 600-watt maximum power rating and 100 dB sensitivity. Its output character is intended for systems where clear, forward high frequencies are needed to complement bass and midrange drivers. Because it is a super tweeter, it is most appropriate as part of a multi-speaker setup with a properly planned crossover approach.\u003c\/p\u003e\u003cp\u003eA die-cast aluminum frame provides the mounting structure, while the listed diaphragm composition is aluminum. The product is also described as a titanium super tweeter design with a bullet-style center section. This bullet configuration is intended to protect the voice-coil area while supporting focused high-frequency dispersion.\u003c\/p\u003e\u003cp\u003eWith a 2-inch overall diameter and 2-7\/8-inch mounting depth, the ATW460BK can be considered for custom panels, speaker pods, and other locations with adequate rear clearance. Spade terminals are specified for straightforward speaker-wire connections. It is supplied as one tweeter with installation accessories listed in the package contents.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Super Tweeter:\u003c\/strong\u003e Adds dedicated high-frequency output to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Maximum Rating:\u003c\/strong\u003e Handles the manufacturer-listed maximum power level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Ohm Impedance:\u003c\/strong\u003e Supports matching with compatible amplifier channels and crossover networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 kHz–25 kHz Response:\u003c\/strong\u003e Covers upper midrange and high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 dB Sensitivity:\u003c\/strong\u003e Designed for efficient output from suitable system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Capacitor Filter:\u003c\/strong\u003e Helps block lower frequencies from reaching the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ATW460BK uses a die-cast aluminum frame and is specified with an aluminum dome and aluminum voice coil. Its compact 1-inch tweeter format is paired with a bullet-style center design. The listed overall diameter is 2 inches, and the mounting depth is 2-7\/8 inches.\u003c\/p\u003e\u003cp\u003eUse this tweeter with a compatible high-frequency signal path and amplification suited to an 8-ohm load. Confirm mounting clearance before installation, especially behind custom panels or pods. Connect using its spade terminals, observe speaker polarity, and avoid sending low-frequency bass content to the tweeter.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614201372742,"sku":"ATW450S","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71euHnLb5QL.jpg?v=1784360759"},{"product_id":"audison-ap1p-1-14-tweeter-component-with-crossover","title":"Audison AP1P 1.14\" Tweeter Component with Crossover","description":"\u003cp\u003eThe Audison AP1P is a 29 mm (1.14 in.) car-audio tweeter component designed to add focused high-frequency reproduction to a component speaker system. It is intended for factory-system upgrades and custom installations where fitment flexibility is important. The supplied APCX P 2T passive crossover provides the required high-pass filtering for the tweeter.\u003c\/p\u003e\u003cp\u003eWith an 8-ohm nominal impedance and 92 dB sensitivity, the AP1P is engineered for integration with compatible component-system amplification and crossover networks. Its published frequency response extends from 1.2 kHz to 25 kHz. A Tetolon fibre dome and 25 mm CCAW voice coil support detailed upper-frequency output with low moving mass.\u003c\/p\u003e\u003cp\u003eAudison uses a double-Neodymium magnetic group in the AP1P motor assembly. This design is paired with a dome profile optimized through FEM simulations for broad off-axis dispersion. That makes the tweeter well suited to locations such as factory sail panels, dash positions, and A-pillars where listening angles can vary.\u003c\/p\u003e\u003cp\u003eAIF, or Any Install Faceplate, gives the AP1P three faceplate options for different installation approaches. The OEM faceplate supports factory-style placement, while mesh and spoke grille options are intended for A-pillar applications. This flexibility helps an installer select a finish and protection level appropriate to the mounting location.\u003c\/p\u003e\u003cp\u003eThe included APCX P 2T crossover is a 12 dB\/octave high-pass network with a 4 kHz crossover point. Its selectable tweeter-level setting offers 0 dB or +3 dB adjustment for system tuning. The AP1P is a practical match for a compatible midrange or woofer section in an Audison Prima-style two-way front-stage upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tweeter:\u003c\/strong\u003e Compact 1.14-inch format supports flexible vehicle placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplates:\u003c\/strong\u003e Three faceplate styles accommodate OEM and custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Neodymium Motor:\u003c\/strong\u003e Supports extended high-frequency performance in a compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Lightweight coil construction supports dynamic high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fibre Dome:\u003c\/strong\u003e Dome material is designed for accurate upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX P 2T Crossover:\u003c\/strong\u003e Included high-pass network provides 4 kHz, 12 dB\/octave filtering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP1P combines a Tetolon fibre dome, 25 mm CCAW voice coil, and double-Neodymium magnetic group in a compact tweeter assembly. Its faceplate system includes OEM, mesh-grille, and spoke-grille options, allowing the cosmetic finish and acoustic opening to be matched to the mounting position. Audison specifies a 22 x 2.5 mm Neodymium magnet size and a tweeter weight of 0.067 kg.\u003c\/p\u003e\u003cp\u003eUse the AP1P with its supplied APCX P 2T passive crossover rather than connecting it directly to a full-range signal. The crossover is specified as a 4 kHz, 12 dB\/octave high-pass design and provides 0 dB or +3 dB tweeter-level adjustment. Confirm available mounting clearance against the listed AP1P and faceplate dimensions, and use the supplied mounting hardware appropriate to the selected OEM, flush, or angled installation method.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217003078,"sku":"AP1P","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UD2jVAaHL.jpg?v=1784361764"},{"product_id":"audison-ap-2-mv-2-wide-range-speakers","title":"Audison AP 2 MV 2\" Wide-Range Speakers","description":"\u003cp\u003eThe Audison AP 2 MV is a compact 2-inch wide-range speaker designed for OEM dashboard and A-pillar locations. It is intended to reproduce both midrange and high-frequency content from a single small driver, helping move the front soundstage higher in the vehicle. This makes it a practical solution for vehicles with limited factory speaker space.\u003c\/p\u003e\u003cp\u003eRather than functioning as a conventional tweeter alone, the AP 2 MV covers a broad 150 Hz to 20 kHz operating range. Its wide-band capability can reduce the need for a crossover point between separate midrange and tweeter drivers in the upper-frequency range. The result is suited to installations seeking coherent vocals, instruments, and high-frequency detail from a compact OEM-style location.\u003c\/p\u003e\u003cp\u003eThe AP 2 MV uses a 25 mm CCAW double-layer voice coil to support its 25 W continuous and 50 W peak power ratings. Its low 145 Hz resonance frequency is notable for a 50 mm driver and supports integration with a door woofer at an appropriate crossover point. With a 4-ohm nominal impedance, it is designed for use in compatible factory-replacement and aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eAn aluminum cone and copper shorting ring are used to support extended high-frequency response and impedance control. The compact motor incorporates a symmetrical double-neodymium magnetic assembly for controlled excursion in a shallow package. These engineering details allow the driver to fit where a larger midrange speaker may not be practical.\u003c\/p\u003e\u003cp\u003eAudison includes a multi-tab OEM adapter intended to support direct replacement in many General Motors, Toyota, and Mercedes applications. The AP 2 MV can also be used as a midrange in a three-way system, or as a surround or center-channel speaker where space is restricted. Confirm the factory opening, mounting depth, wiring connection, and system crossover settings before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Range Response:\u003c\/strong\u003e Covers 150 Hz to 20 kHz from one compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Inch OEM Format:\u003c\/strong\u003e Fits many 50 mm dashboard and A-pillar locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Supports power handling and low-frequency extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cone:\u003c\/strong\u003e Provides a rigid diaphragm for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Shorting Ring:\u003c\/strong\u003e Helps flatten impedance for extended high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Adapter Included:\u003c\/strong\u003e Supports installation in many GM, Toyota, and Mercedes vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 2 MV combines an aluminum cone, copper shorting ring, 25 mm CCAW double-layer voice coil, and neodymium magnetic motor in a compact basket. Its symmetrical double-neodymium magnet assembly is designed for excursion control while preserving the shallow dimensions needed for OEM-oriented installations. Each component weighs 0.15 kg.\u003c\/p\u003e\u003cp\u003eUse the supplied multi-tab adapter only after confirming its fit with the specific vehicle and factory speaker location. The speaker is suited to 50 mm OEM dash or A-pillar positions, and may also be used as a three-way midrange, surround speaker, or center-channel driver. Match it to a compatible 4-ohm audio channel and configure crossover settings appropriate to the rest of the system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217330758,"sku":"AP2MV","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ObkiJbv0L.jpg?v=1784361799"},{"product_id":"audison-ap-4-4-midrange-speakers","title":"Audison AP 4 4\" Midrange Speakers","description":"\u003cp\u003eThe Audison AP 4 is a pair of 4-inch car-audio midbass\/midrange drivers designed for factory-location upgrades where space is limited. Their compact format and shallow installation profile help address fitment challenges in many OEM speaker positions. They are intended for listeners building a more detailed front stage or replacing small factory drivers.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 40-watt continuous power handling, and 91 dB sensitivity, the AP 4 is suited to compatible factory-power and amplified systems. Its 80 Hz to 7.5 kHz frequency response covers a broad midbass and midrange range for a driver of this size. The sound-oriented design focuses on clear, balanced reproduction through the vocal and upper-midrange region.\u003c\/p\u003e\u003cp\u003eA 25 mm pure-copper voice coil supports controlled performance through the mid-high frequencies. The cone is engineered to provide a calibrated mechanical low-pass behavior, so Audison states that a passive crossover is not required to maximize driver efficiency. This makes the AP 4 a practical option for system designs that need a dedicated small-format midrange or midbass driver.\u003c\/p\u003e\u003cp\u003eThe water-repellent treated paper cone uses a profile developed with FEM simulation and optimized with Klippel Scan Vibrometer measurement. Its shallow Triple Wave TPU surround is designed to support linear excursion. Together, these elements support a compact driver intended for accurate output in OEM-style mounting locations.\u003c\/p\u003e\u003cp\u003eThe AP 4 can be used as part of a component-based car-audio upgrade with appropriate system tuning and amplification. It is supplied as a pair, allowing installation across left and right speaker locations. Confirm the vehicle's opening diameter, mounting depth, wiring polarity, and available signal range before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Driver Size:\u003c\/strong\u003e Fits applications designed for 100 mm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Handling:\u003c\/strong\u003e Supports power-matched factory or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Copper Voice Coil:\u003c\/strong\u003e Helps maintain balanced mid-high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a treated paper cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Supports linear cone excursion in a shallow profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Low-Pass Behavior:\u003c\/strong\u003e Reduces the need for a passive crossover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 4 uses a water-repellent treated paper cone, a 25 mm pure-copper voice coil, and a thermoplastic polyurethane surround with Audison's shallow Triple Wave profile. Its compact basket has an abrasion-resistant, scratch-resistant coating. The driver has a nominal 100 mm diameter, a 103 mm outer diameter, and a 0.4 kg listed weight.\u003c\/p\u003e\u003cp\u003eCheck for a 93 mm installation opening and approximately 41 mm of mounting-depth clearance before purchase; the manufacturer also lists a 43 mm overall depth dimension. Use the pair in matching left\/right locations with a compatible 4-ohm signal path and power source. APG 4 protective grilles are listed by Audison as an optional accessory rather than a confirmed included item.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217625670,"sku":"AP4","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71nDD8nYniL.jpg?v=1784361841"},{"product_id":"audison-ap-6-5-6-5-prima-series-woofers","title":"Audison AP 6.5 6.5\" Prima Series Woofers","description":"\u003cp\u003eThe Audison AP 6.5 is a pair of 165 mm (6.5-inch) Prima Series woofers designed for vehicle speaker upgrades where factory locations and practical mounting depth matter. With a 4-ohm nominal impedance and 70 watts continuous power handling, they are suited to replacing compatible door or rear-deck midbass drivers. Their compact installation profile helps support OEM-style integration without requiring an oversized speaker location.\u003c\/p\u003e\u003cp\u003eThese woofers are intended for listeners building a more detailed and controlled front-stage or full-range speaker system. The 60 Hz to 5 kHz operating range supports midbass and midrange duties, while the 93.5 dB sensitivity helps them deliver useful output from modestly powered systems. They can be used in an upgrade path with compatible tweeters, amplification, and system tuning selected for the vehicle.\u003c\/p\u003e\u003cp\u003eA 32 mm pure-copper voice coil is used to support power handling and low-frequency control. The water-repellent treated paper cone has a profile developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer testing. This engineering is intended to provide a controlled mechanical low-pass characteristic without a passive filter fitted to the woofer itself.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 uses a TPU surround with Audison's shallow Triple Wave profile, designed to maintain excursion linearity. Its high-density-flux ferrite motor, compact basket, and damping epoxy-secured motor structure support a durable installation in a vehicle environment. The design is focused on a direct-fit-oriented speaker upgrade rather than a large custom build.\u003c\/p\u003e\u003cp\u003eFor system planning, match the AP 6.5 with a compatible 4-ohm amplifier channel or head-unit output and allow for its 56 mm mounting-depth dimension. The woofer is supplied as a pair, while protective grilles are not included. Audison offers the APG 6.5 grille set separately for installations where exposed-driver protection is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits many common 6.5-inch vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 W Continuous Power:\u003c\/strong\u003e Supports amplifier-matched system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm Copper Voice Coil:\u003c\/strong\u003e Helps provide controlled low-frequency performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Suits the changing conditions inside vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Designed for linear cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Mounting Depth:\u003c\/strong\u003e Helps fit constrained OEM speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 combines a water-repellent treated paper cone, TPU Triple Wave surround, high-density-flux ferrite magnet, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The speaker terminals use high-current fast-on connections with double contacts for both positive and negative poles, plus temperature-resistant covers to help protect against accidental short circuits.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's available opening and depth with the AP 6.5 dimensions: 165 mm overall diameter, 141 mm mounting cutout reference, and 56 mm mounting-depth reference. Use correct polarity at the marked terminals and select amplification appropriate for a 4-ohm speaker rated at 70 watts continuous power. For exposed installations, plan for separately available Audison APG 6.5 protective grilles.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218412102,"sku":"AP6-5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zYDg-5m1L.jpg?v=1784361935"},{"product_id":"audison-ap-6-5p-6-5-component-woofer-pair","title":"Audison AP 6.5P 6.5\" Component Woofer Pair","description":"\u003cp\u003eThe Audison AP 6.5P is a pair of 165 mm (6.5-inch) component woofers designed for upgrading factory door-speaker locations. It is intended for listeners who want stronger midbass capability and greater power handling than typical OEM speakers can provide. Its compact format supports installations where available depth and mounting space are limited.\u003c\/p\u003e\u003cp\u003eWith 110 W continuous and 330 W peak power handling per speaker, the AP 6.5P is suited to systems using an external amplifier as well as carefully configured factory-system upgrades. Its 4-ohm nominal impedance makes it compatible with many conventional car-audio amplifier channels. The 92.5 dB sensitivity specification supports efficient output from an appropriately matched system.\u003c\/p\u003e\u003cp\u003eThe woofer uses a 32 mm Copper-Clad Aluminum Wire voice coil to manage higher applied power while keeping moving mass controlled. Audison specifies 5.6 mm Xmax for increased cone travel during dynamic passages. The result is a woofer engineered for controlled midbass response and dependable operation within its rated range.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone provides the diaphragm material, while the magnetic assembly is sized to help maintain cone control at high excursion. The basket was engineered to reduce airflow resistance while retaining a compact shape. These design choices support use in OEM-style door locations where installation clearance is an important consideration.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P is a woofer component rather than a complete coaxial speaker, making it a practical foundation for a custom component system. It can be paired with compatible tweeters, crossover networks, amplification, and sound treatment based on the vehicle and installation goals. For a front-stage upgrade, confirm fitment, available mounting depth, and the crossover plan before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits the common 6.5-inch speaker class for many door-speaker upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 W Continuous Handling:\u003c\/strong\u003e Supports use with appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm CCAW Voice Coil:\u003c\/strong\u003e Helps manage power while supporting controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Excursion:\u003c\/strong\u003e Rated at 5.6 mm Xmax for handling demanding dynamic peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Water-repellent cone material is suited to automotive-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Basket:\u003c\/strong\u003e Designed to ease installation in OEM-style speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P combines a water-repellent treated paper cone, 32 mm CCAW voice coil, compact basket, and substantial magnetic assembly. Audison designed the basket to lower airflow resistance while preserving a compact installation profile. Each speaker has a specified weight of 1.45 kg.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and panel clearance before ordering or installation. The manufacturer lists a 165 mm overall diameter, 141 mm mounting-hole diameter, 75 mm total depth, and 66.5 mm mounting depth. Because this is a woofer component, use suitable high-pass and low-pass filtering, and select compatible tweeters and crossovers when building a component system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218805318,"sku":"AP6-5P","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618Ch2qrJ1L.jpg?v=1784361979"},{"product_id":"audison-ap8-8-woofer-pair","title":"Audison AP8 8\" Woofer Pair","description":"\u003cp\u003eThe Audison AP8 is an 8-inch, 4-ohm Prima Series woofer designed for vehicle locations that use an 8-inch OEM woofer. It is intended to add capable low-frequency and midbass output in factory-style speaker positions without requiring a deep driver. Its broad 200 mm cone area helps it suit upgrades where space limits the use of a separate subwoofer.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power, the AP8 is built for use in properly matched amplified car-audio systems. Its 93.5 dB sensitivity supports efficient output from compatible amplification. The stated 35 Hz to 3 kHz frequency response gives it a useful operating range for dedicated woofer duties.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone forms the basis of the AP8's acoustic design. Audison specifies a cone profile developed through FEM simulation and optimized with Klippel Scan Vibrometer measurements. A shallow TPU Triple Wave surround is used to support controlled cone travel and excursion linearity.\u003c\/p\u003e\u003cp\u003eThe AP8 uses a 25 mm voice coil and a high-density-flux ferrite motor assembly. Its mechanical low-pass behavior is designed so a passive crossover is not required to maximize woofer efficiency. This makes the driver especially relevant in OEM-integration installations where packaging and connection simplicity matter.\u003c\/p\u003e\u003cp\u003eWith a 174 mm mounting cutout and 66 mm mounting depth, the AP8 is intended for relatively shallow factory woofer locations. Dual-contact positive and negative fast-on terminals provide connection flexibility at the speaker. It can be used as part of a larger Prima upgrade with compatible amplification, signal processing, and higher-frequency speakers selected for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Woofer:\u003c\/strong\u003e Fits applications designed around 200 mm OEM woofer locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports properly matched amplified system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm-rated car audio amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Provides a treated cone for automotive speaker use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Supports controlled excursion in a shallow-profile design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Contact Fast-On Terminals:\u003c\/strong\u003e Allows flexible, quick speaker-wire connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP8 combines a water-repellent treated paper cone, TPU surround, 25 mm voice coil, and high-density-flux ferrite magnet. Its compact basket has an abrasion-resistant, scratch-resistant coating, while the motor is secured with damping epoxy adhesive. A temperature-resistant plastic terminal cover helps protect the connections against accidental short circuits.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation: the technical drawing lists a 174 mm cutout dimension and 66 mm mounting-depth dimension. Use appropriate speaker wiring and a compatible 4-ohm amplifier channel, then set amplifier gain and filtering for the installed system. The manufacturer notes a grille is included; confirm vehicle-specific mounting hardware and adapter requirements separately.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219165766,"sku":"AP8","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81WnJItlBxL.jpg?v=1784362025"},{"product_id":"audison-apbmwk4e-4-bmw-mini-2-way-component-speakers","title":"Audison APBMWK4E 4\" BMW-Mini 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APBMW K4E is a 4-inch, two-way component speaker kit engineered for select BMW and MINI vehicles with factory two-way audio systems. It combines a 100 mm midrange driver, a separate 29 mm tweeter, and a dedicated crossover network. The kit is designed around BMW-MINI compatible mounting and Plug \u0026amp; Play connections.\u003c\/p\u003e\u003cp\u003eThis system is intended for owners replacing factory front mid-high speakers while retaining an OEM-style installation approach. Its LargeBasket configuration uses an aluminum die-cast basket designed for compatible BMW-MINI mounting locations. Vehicle-specific fitment should be verified before purchase.\u003c\/p\u003e\u003cp\u003eThe 100 mm midrange uses a water-repellent pressed-paper cone for natural midrange reproduction. Its 90 Hz resonance frequency supports high-pass filtering in the 150-200 Hz range when used in an appropriately configured system. The published system frequency response is 90 Hz to 23 kHz.\u003c\/p\u003e\u003cp\u003eA 29 mm Tetolon tweeter handles the upper-frequency range and uses a 25 mm voice coil. Its off-axis dispersion characteristics were optimized using FEM simulations, helping suit OEM tweeter positions that are not directly aimed at the listener. The supplied crossover provides a 6 kHz high-pass section at 6 dB per octave.\u003c\/p\u003e\u003cp\u003eWith 50 W continuous and 100 W peak power handling at 4 ohms, the APBMW K4E can be used as part of a factory-speaker replacement or a more extensive BMW-MINI audio upgrade. Plug \u0026amp; Play connectors, a supplied tweeter support, and a 30 cm extension cable simplify integration with compatible factory locations. It can also be paired with compatible Audison BMW underseat subwoofer solutions when a broader system upgrade is planned.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW-MINI Two-Way Design:\u003c\/strong\u003e Built for select factory two-way BMW and MINI speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Pressed-Paper Midrange:\u003c\/strong\u003e Water-repellent cone supports natural midrange character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Separate tweeter extends response through the high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Connections:\u003c\/strong\u003e Compatible connectors reduce the need for wiring modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kHz Crossover:\u003c\/strong\u003e Dedicated high-pass crossover helps divide midrange and tweeter duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor System:\u003c\/strong\u003e Compact magnetic assembly helps minimize speaker bulk and weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW K4E midrange uses an aluminum die-cast basket, neodymium magnetic group, 25 mm fiberglass voice coil, and removable damping motor cover. Its water-repellent pressed-paper cone is paired with a 29 mm Tetolon tweeter using a 25 mm voice coil. The crossover uses high-quality components and Plug \u0026amp; Play connections.\u003c\/p\u003e\u003cp\u003eThis kit is intended for select BMW-MINI vehicles equipped with factory two-way systems and compatible large-basket mounting locations. A tweeter support and 30 cm Plug \u0026amp; Play extension are supplied to assist installation in OEM placements. Confirm vehicle fitment, mounting configuration, and amplifier or factory-system compatibility before installation; some BMW models with non-standard fixings may require the separately available APBMW A4E adapter kit.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219526214,"sku":"APBMWK4E","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zf7xVJZbL.jpg?v=1784362072"},{"product_id":"audison-apbmw-k4m-4-bmw-mini-2-way-component-speakers","title":"Audison APBMW K4M 4\" BMW\/MINI 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APBMW K4M is a 4-inch, two-way component speaker kit engineered for upgrading compatible BMW and MINI factory two-way audio systems. It combines a 100 mm midrange driver with a separate 29 mm tweeter, an inline high-pass crossover, and vehicle-oriented Plug \u0026amp; Play connections. The kit is intended to improve clarity and tonal balance while retaining an OEM-style installation approach.\u003c\/p\u003e\u003cp\u003eThe 100 mm midrange uses a water-repellent pressed-paper cone, selected for natural midrange reproduction. Its 90 Hz resonance frequency supports high-pass filtering in the 150–200 Hz range when used in a properly configured system. With 50 watts continuous and 100 watts peak power handling, it is suited to factory-system upgrades and appropriately matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA 29 mm Tetolon-dome tweeter handles the upper-frequency range and is designed for off-axis dispersion in vehicle interiors. The supplied crossover uses a 6 kHz high-pass point with a 6 dB\/octave slope for the tweeter. A selectable -3 dB or 0 dB tweeter adjustment helps accommodate placement and listening preference.\u003c\/p\u003e\u003cp\u003eAudison uses neodymium magnetic assemblies to keep the components compact, while the midrange employs a 25 mm fiberglass voice coil and an aluminum die-cast basket. The midrange's removable damping motor cover and the water-repellent cone support use in factory-style door locations. Plug \u0026amp; Play connectors are built into the system to simplify integration where the vehicle fitment is compatible.\u003c\/p\u003e\u003cp\u003eThe APBMW K4M is a practical fit for listeners seeking a BMW\/MINI-specific front, rear-deck, or other OEM-location speaker upgrade, subject to vehicle compatibility. A 300 mm extension cable and tweeter support are supplied for installation flexibility and OEM-position placement. Some vehicles may require an optional mounting adapter, so fitment should be checked before ordering.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI Upgrade Design:\u003c\/strong\u003e Developed for compatible factory two-way BMW and MINI audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Midrange:\u003c\/strong\u003e Compact 4-inch driver fits small-basket OEM-style speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Water-repellent cone supports natural midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Tweeter:\u003c\/strong\u003e 29 mm dome is optimized for off-axis high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline High-Pass Crossover:\u003c\/strong\u003e Protects and routes high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Connections:\u003c\/strong\u003e Vehicle-oriented connectors simplify compatible installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW K4M pairs a neodymium motor system with an aluminum die-cast midrange basket to manage space and weight in OEM-oriented installations. Its 25 mm fiberglass midrange voice coil is designed for power handling and rigidity, while the separate tweeter uses a Tetolon dome. The kit also includes a removable damping motor cover, tweeter support, crossover hardware, and a 300 mm extension lead.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker-basket style, factory-system configuration, and available tweeter location before installation. Connect the included crossover between the vehicle wiring and tweeter as directed, then use the supplied extension cable where needed. Certain BMW\/MINI models require the optional Audison APBMW A4E adapter for non-standard mounting points; professional installation is recommended when factory trim, door panels, or wiring must be modified.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219952198,"sku":"APBMWK4M","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71CWacBZdfL.jpg?v=1784362116"},{"product_id":"audison-apbmw-x4e-4-bmw-mini-coaxial-speakers","title":"Audison APBMW X4E 4\" BMW\/MINI Coaxial Speakers","description":"\u003cp\u003eThe Audison APBMW X4E is a pair of 4-inch, two-way coaxial speakers engineered for selected BMW and MINI factory speaker locations using the large-basket fitment. It is intended for vehicles that cannot accommodate a separate front two-way system, as well as compatible rear-speaker upgrade locations. The coaxial layout combines the midrange driver and tweeter in one OEM-oriented assembly.\u003c\/p\u003e\u003cp\u003eEach APBMW X4E handles up to 40 watts continuous and 80 watts peak at a 4-ohm impedance. Its 100 Hz to 22 kHz frequency response supports midrange and high-frequency reproduction in a factory-style speaker position. With 88 dB sensitivity, it is designed to work within an appropriately matched OEM-replacement or amplified system.\u003c\/p\u003e\u003cp\u003eThe midrange section uses a water-repellent pressed-paper cone intended to provide a natural midrange character. A 25 mm fiberglass woofer voice coil supports power handling and stiffness. The built-in Tetolon dome tweeter uses a 20 mm voice coil and a 24 mm diaphragm.\u003c\/p\u003e\u003cp\u003eA neodymium magnetic assembly helps keep the speaker compact for BMW\/MINI OEM locations. The die-cast aluminum basket is made for the APBMW X4E large-basket mounting format and uses BMW\/MINI-compatible Plug \u0026amp; Play connectors. Its removable damping motor cover can be taken off where installation clearance is limited.\u003c\/p\u003e\u003cp\u003eThe APBMW X4E is a practical choice for replacing compatible factory coaxial speakers while retaining vehicle-specific mounting and connection provisions. A 30 cm extension cable with Plug \u0026amp; Play connectors is supplied to add flexibility when routing the connection. Confirm the vehicle's original speaker basket, mounting location, and audio-system configuration before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI Large-Basket Fitment:\u003c\/strong\u003e Dedicated basket and fixing arrangement suit compatible OEM speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates midrange and tweeter functions in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Power:\u003c\/strong\u003e Supports properly matched factory-replacement or amplified speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Water-repellent cone material supports natural midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e Optimized dispersion helps suit off-axis OEM speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Extension:\u003c\/strong\u003e Included 30 cm extension aids installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW X4E combines a neodymium magnetic group, 25 mm fiberglass woofer voice coil, water-repellent pressed-paper cone, and Tetolon dome tweeter. Its aluminum die-cast basket is designed for mechanical rigidity and BMW\/MINI-compatible placement. A removable damping motor cover is included as part of the speaker design.\u003c\/p\u003e\u003cp\u003eUse these speakers only where the vehicle accepts the APBMW X4E large-basket mounting format. Connect through the supplied 30 cm Plug \u0026amp; Play extension as needed, and verify clearance, connector style, and factory audio-system configuration before fitting. Although the cone is water-repellent, speakers should not be installed in locations exposed directly to water, excessive humidity, dust, or dirt.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614220968006,"sku":"APBMWX4E","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Uhr3k53kL.jpg?v=1784362241"},{"product_id":"audison-apk130-5-25-2-way-component-speaker-system","title":"Audison APK130 5.25\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK130 is a 5.25-inch, two-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over coaxial speakers. The kit combines AP 5 woofers, AP 1 tweeters, compact APCX TW passive crossovers, and protective grilles. Its 4-ohm design is intended for use with compatible factory or aftermarket car audio amplification.\u003c\/p\u003e\u003cp\u003eThis system is suited to installations with 130 mm speaker locations, including many OEM door and rear-panel placements. The separate 26 mm tweeters allow higher frequencies to be positioned closer to the listener than the woofers. That arrangement can help support a more focused front-stage installation when properly mounted and tuned.\u003c\/p\u003e\u003cp\u003eThe APK130 is rated for 75 watts continuous and 225 watts peak power handling per system, with a 70 Hz to 20 kHz published frequency response. The AP 5 woofer uses a 32 mm pure-copper voice coil, water-repellent treated paper cone, and TPU Triple Wave surround. Its 93 dB sensitivity specification supports efficient operation from appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm Tetolon-fibre diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to address response effects that can occur around 10 kHz to 13 kHz when the tweeter is installed behind restrictive OEM grilles. The included APCX TW crossover provides a selectable 0 dB or +2 dB tweeter level setting for different mounting conditions.\u003c\/p\u003e\u003cp\u003eFor an OEM-oriented upgrade, the compact woofer basket and reduced mounting depth help fit available factory speaker locations. High-current fast-on terminals on the woofers use double contacts on both positive and negative poles for flexible connection. The system can be used as a front component stage with an external amplifier or a compatible head unit, provided power and mounting requirements are checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Rating:\u003c\/strong\u003e Handles appropriately matched amplifier power for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 5 Woofer:\u003c\/strong\u003e 130 mm woofer uses a treated paper cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Tweeter:\u003c\/strong\u003e 26 mm Tetolon-fibre tweeter covers high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e APCX TW offers 0 dB and +2 dB settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Protective grilles are supplied with the speaker system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 5 woofer combines a compact, abrasion-resistant coated basket with a damping-epoxy-secured motor, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. Its 32 mm pure-copper voice coil is paired with an 85 x 40 x 13 mm magnet assembly. The AP 1 tweeter uses a neodymium magnet and a 20 mm CCAW voice coil on a Kapton former with ferrofluid cooling.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm woofer and provides sufficient mounting clearance before purchase; the AP 5 is listed at 48.5 mm mounting depth and 119 mm for Dimension B. Wire each AP 1 tweeter through its supplied APCX TW crossover, following the marked connections and preserving polarity. Use the 0 dB setting for an unobstructed A-pillar tweeter location, or the +2 dB setting when the tweeter is installed behind an OEM grille.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614222245958,"sku":"APK130","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81K_dJe06AL.jpg?v=1784362376"},{"product_id":"audison-apk163-6-5-3-way-component-speaker-set","title":"Audison APK163 6.5\" 3-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 163 is a 4-ohm, three-way component speaker system designed for upgrading factory car audio while retaining practical OEM-style installation options. It combines a 6.5-inch AP 6.5 woofer, 4-inch AP 4 midbass, and 1-inch AP 1 tweeter with dedicated passive crossover networks. This arrangement is suited to listeners who want greater frequency coverage and separation than a typical two-way component system.\u003c\/p\u003e\u003cp\u003eWith 125 watts continuous and 375 watts peak power handling, the APK 163 is intended for use with an appropriately matched aftermarket amplifier or a capable factory-powered upgrade. Its specified 50 Hz to 20 kHz frequency response covers bass, midrange, and treble duties across three separate drivers. The system's 4-ohm nominal impedance supports conventional car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil and a water-repellent pressed-paper cone to provide controlled low-frequency output. The AP 4 midbass extends the system's vocal and upper-midrange coverage, helping place more of the musical range in dedicated drivers. A 26 mm Tetolon-fiber AP 1 tweeter handles high frequencies and incorporates an acoustic lens intended for OEM grille installations.\u003c\/p\u003e\u003cp\u003eAudison equips the APK 163 with separate compact crossovers for the woofer, midbass, and tweeter. This design helps simplify OEM replacement installations by avoiding the need to route additional crossover wiring through the vehicle door. The tweeter crossover also provides 0 dB and +2 dB level settings for adjustment based on tweeter position and grille placement.\u003c\/p\u003e\u003cp\u003eThe woofer and midbass use water-repellent treated paper cones, TPU surrounds, and compact baskets intended for shallow OEM locations. Their Triple Wave surround profile is engineered to support linear cone excursion, while the woofer uses high-current fast-on terminals with dual contacts for flexible connection. Grilles and crossover networks are included, making the APK 163 a complete passive three-way front-stage speaker package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Separate woofer, midbass, and tweeter cover dedicated frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Individual networks simplify integration of each speaker component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Selection:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cones:\u003c\/strong\u003e Treated woofer and midbass cones suit vehicle-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Focused Connections:\u003c\/strong\u003e Woofer fast-on terminals support quick, flexible wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer and AP 4 midbass use high-density-flux ferrite magnets, water-repellent pressed-paper cones, and TPU Triple Wave surrounds. Their compact baskets have an abrasion-resistant, scratch-resistant coating, while the woofer motor is secured with damping epoxy adhesive. The AP 1 tweeter uses a 26 mm Tetolon-fiber diaphragm and wide-roll surround.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has mounting positions for a 165 mm woofer, 100 mm midbass, and 26 mm tweeter before installation. Install each included crossover with its intended driver and use the specified passive crossover points rather than bypassing the networks. Select the tweeter crossover's 0 dB or +2 dB setting according to placement, particularly when the tweeter is mounted behind a restrictive factory grille.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614222704710,"sku":"APK163","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61LYj2RlIVL.jpg?v=1784362419"},{"product_id":"audison-apk-165-6-5-2-way-component-speaker-system","title":"Audison APK 165 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK 165 is a 4-ohm, 6.5-inch two-way component speaker system designed for upgrading factory front-stage audio. It combines an AP 6.5 woofer, AP 1 tweeter, APCX TW passive crossover, and included grilles. The system is intended for installations where separate woofer and tweeter locations can improve staging and detail over a basic full-range door speaker.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous power handling and 300 watts peak power handling, the APK 165 is suited to systems using an appropriate external amplifier or compatible amplified source. Its 60 Hz to 20 kHz frequency response covers the main midbass and high-frequency range for a component front stage. The woofer's 93.5 dB SPL specification supports effective output from moderate-power car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. This combination is engineered for controlled low-frequency reproduction and linear cone travel. The woofer has a listed maximum linear excursion of ±2.5 mm and an 80 Hz resonant frequency.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround and an acoustic lens. The lens is designed to help address response effects in the 10 kHz to 13 kHz range that can occur when a tweeter is mounted behind restrictive factory grilles. This makes the system especially relevant for OEM-style mounting locations as well as exposed A-pillar placements.\u003c\/p\u003e\u003cp\u003eAn APCX TW passive high-pass crossover is included to direct high frequencies to the tweeter. Its selectable 0 dB and +2 dB level settings allow adjustment for different tweeter mounting conditions. The APK 165 can serve as the front component stage in a larger system with rear fill, a dedicated amplifier, DSP processing, and a subwoofer for deeper bass.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofer and tweeter support more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Matches appropriately powered 4-ohm amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX TW Crossover:\u003c\/strong\u003e Provides a high-pass network for the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Supports use in vehicle door locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Terminals:\u003c\/strong\u003e Helps simplify woofer connection during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its treated paper cone is paired with a thermoplastic polyurethane surround, while the tweeter incorporates a wide-roll surround and acoustic lens. Included grilles provide an additional finishing option where the speakers are not concealed by factory trim.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available 165 mm speaker opening, mounting depth, mounting-hole pattern, and tweeter location before installation. Use the supplied passive crossover between the signal source or amplifier and the tweeter, selecting 0 dB for an A-pillar installation without an added grille or +2 dB when the tweeter is installed behind an OEM grille. The woofer's high-current fast-on terminals use double contacts on both positive and negative poles for connection flexibility.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223130694,"sku":"APK165","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL.jpg?v=1784362462"},{"product_id":"audison-apk165ohm2-6-5-2-way-component-speaker-set","title":"Audison APK165OHM2 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 165 Ω2 is a 6.5-inch, two-way component speaker system for vehicle audio upgrades. It combines AP 6.5 Ω2 woofers, AP 1 tweeters, dedicated passive crossovers, and grilles. The separate woofer and tweeter components allow placement that better suits factory speaker locations than a single coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis system uses a 2-ohm nominal impedance and is intended for amplifiers that are stable at a 2-ohm speaker load. It is rated for 100 watts continuous power handling and 300 watts peak power. Confirm amplifier load capability and available installation space before choosing this version.\u003c\/p\u003e\u003cp\u003eThe APK 165 Ω2 has a specified frequency response of 50 Hz to 20 kHz and a 95 dB sensitivity rating. Its 75 Hz woofer resonance frequency and 2.8 mm maximum linear excursion support useful low-frequency output within a properly installed door or factory speaker location. A separate tweeter is used to cover upper frequencies instead of asking the woofer to reproduce the full range.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 Ω2 woofer uses a water-repellent treated paper cone and a TPU surround with Audison's Triple Wave profile. Its 25 mm voice coil has a 10 mm winding height, while the compact basket is finished with an abrasion- and scratch-resistant coating. The AP 1 tweeter incorporates an acoustic lens intended to help balance response in the 10 kHz to 13 kHz region when used behind restrictive factory grilles.\u003c\/p\u003e\u003cp\u003eTwo separate passive crossovers divide the signal between the woofer and tweeter. The APCX WF Ω2 woofer network uses a low-loss inductor, while the APCX TW Ω2 tweeter network provides selectable Hi-Contour operation. Integrated crossover leads terminate in polarity-differentiated fast-on connectors to support OEM-style speaker replacement wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm System:\u003c\/strong\u003e Designed to draw more power from compatible 2-ohm-stable amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Direct woofer and tweeter frequencies to their intended drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Contour Tweeter Setting:\u003c\/strong\u003e Provides a selectable upper-frequency contour option for installation conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Woofer Cone:\u003c\/strong\u003e Uses water-repellent paper material for the 6.5-inch woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Leads:\u003c\/strong\u003e Polarity-differentiated connectors simplify crossover-to-speaker connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer uses a 165 mm frame with a 127 mm cone diameter, a 25 mm voice coil, and an 85 x 32 x 15 mm magnet. Its TPU Triple Wave surround is designed for linear excursion, while the compact basket is coated for abrasion and scratch resistance. The 26 mm AP 1 tweeter uses a 20 mm voice coil and an acoustic lens, and protective grilles are included.\u003c\/p\u003e\u003cp\u003eInstall the woofers only where the vehicle provides adequate mounting depth and clearance, and mount the tweeters securely behind a protective grille. Route the amplifier signal first to the supplied APCX WF Ω2 and APCX TW Ω2 passive networks, then connect each network to its matching driver using the integrated fast-on leads. Use an amplifier that is explicitly rated for 2-ohm operation, observe polarity, and select the tweeter contour setting according to the mounting position and factory-grille presence.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223589446,"sku":"APK165OHM2","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL_c825f717-f13c-4df3-9bd2-045249988241.jpg?v=1784362512"},{"product_id":"audison-apk165p-6-5-2-way-component-speaker-system","title":"Audison APK165P 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK165P is a 6.5-inch, 2-way component speaker system for upgrading front-stage sound in compatible vehicle locations. It pairs separate AP 6.5P woofers with AP 1P tweeters and dedicated passive crossover modules. The system is designed for installations where the woofer and tweeter are mounted separately rather than in a single coaxial speaker location.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 115-watt continuous power handling, and 345-watt peak power handling, this system is suited to aftermarket audio systems using a compatible head unit or external amplifier. Its 50 Hz to 24 kHz stated system frequency response covers bass and midrange from the door woofer through high frequencies from the separate tweeter. The 92.5 dB SPL system sensitivity rating supports efficient output from properly matched equipment.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P woofer uses a water-repellent treated paper cone and a 32 mm CCAW voice coil. Its 5.6 mm Xmax specification and compact basket are intended to support factory-style door mounting locations. The AP 1P tweeter uses a 29 mm Tetolon fibre dome with a 25 mm CCAW voice coil.\u003c\/p\u003e\u003cp\u003eAudison's AIF, or Any Install Faceplate, system gives the AP 1P tweeter interchangeable mounting options. Three mounting accessories are supplied to support different installation approaches, helping accommodate common factory tweeter locations and custom placements. The tweeter's double-neodymium magnetic assembly and FEM-optimized dome profile are engineered for high-frequency extension and off-axis dispersion.\u003c\/p\u003e\u003cp\u003eSeparate compact crossover modules divide the signal between the woofer and tweeter. The woofer low-pass filter is specified at 4 kHz with a 6 dB\/octave slope, while the tweeter high-pass filter is 4 kHz with a 12 dB\/octave slope. This makes the APK165P a practical component set for a front-speaker upgrade built around compatible 4-ohm amplification and proper vehicle-specific mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate 6.5-inch woofers and 29 mm tweeters allow dedicated placement of each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e115 W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting:\u003c\/strong\u003e Interchangeable faceplates and supplied mounting accessories support varied mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Copper-clad aluminum wire voice coils are used in both woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Separate compact woofer and tweeter crossover modules simplify signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e The AP 6.5P woofer cone is treated for automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P woofer combines a treated paper cone, 32 mm CCAW voice coil, compact basket, and a 100 x 40 x 18 mm magnetic assembly. The AP 1P tweeter uses a Tetolon fibre dome, 25 mm CCAW voice coil, and double-neodymium magnetic assembly. The system also provides a selectable tweeter level setting of 0 dB or +3 dB at the crossover.\u003c\/p\u003e\u003cp\u003eConfirm door opening diameter, mounting depth, and clearance behind the panel before installation; the AP 6.5P lists a 141 mm cutout diameter and 66.5 mm mounting depth. Route each channel through its assigned passive crossover rather than connecting the tweeter directly to a full-range amplifier output. Secure all components firmly, use the appropriate faceplate and mounting accessory for the tweeter location, and confirm polarity before reassembling vehicle trim.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614226604102,"sku":"APK165P","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71KYClkNHCL.jpg?v=1784362857"},{"product_id":"audison-apk570-5-x-7-2-way-component-speakers","title":"Audison APK570 5 x 7\" 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APK570 is a 2-way component speaker system designed for vehicles with factory 5 x 7-inch elliptical door-speaker locations. It combines AP 570 woofers, AP 1 tweeters, and dedicated APCX TW 570 passive crossovers. This kit is intended for replacing factory door speakers while retaining a separate tweeter layout.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous and 300 watts peak power handling, the APK570 is suited to amplified systems as well as compatible factory or aftermarket head-unit upgrades. Its 4-ohm nominal impedance supports common car-audio amplification configurations. The rated 55 Hz to 20 kHz frequency response covers midbass through high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe AP 570 woofer uses a 32 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer measurement. A Triple Wave surround is used to support linear cone excursion.\u003c\/p\u003e\u003cp\u003eThe separate AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround. Its acoustic lens is designed to address in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM tweeter placements. The dedicated crossover routes high frequencies to the tweeter at a specified 3 kHz high-pass point.\u003c\/p\u003e\u003cp\u003eFor OEM-focused installation, the APK570 uses a compact woofer basket and reduced mounting depth. High-current double-contact Faston terminals simplify woofer and tweeter connections, while the compact crossover includes selectable tweeter attenuation. It is a practical option when a vehicle already accommodates 5 x 7-inch door woofers and separate tweeters.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7-Inch Component System:\u003c\/strong\u003e Fits vehicles designed for elliptical 5 x 7-inch door woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Power:\u003c\/strong\u003e Supports substantial power in an appropriately matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Separate Tweeters:\u003c\/strong\u003e Provides dedicated high-frequency reproduction outside the woofer location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Directs high frequencies to the tweeters at 3 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Offers 0 dB or +2 dB attenuation selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps suit the woofer to door-mounted use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 570 woofer combines a treated paper cone, Triple Wave surround, pure-copper voice coil, and compact coated basket. Its motor is secured with damping epoxy adhesive, while the AP 1 tweeter uses a wide-roll surround and acoustic lens. The crossover is compact and includes Faston connectors intended to reduce connection errors.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 5 x 7-inch woofer openings and provisions for separate tweeters before installation. Use the included dedicated APCX TW 570 crossovers between the audio source or amplifier and the individual woofer and tweeter connections. Match the system to a compatible 4-ohm amplifier or speaker output and observe the 100-watt continuous power rating when setting amplifier gain.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614227062854,"sku":"APK570","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71aKwGyxdOL.jpg?v=1784362895"},{"product_id":"audison-apk690-6x9-2-way-component-speaker-system","title":"Audison APK690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK690 is a Prima Series 2-way component speaker system designed for vehicles with factory 6 x 9-inch door speaker locations. It combines AP 690 elliptical woofers, AP 1 tweeters, and dedicated APCX TW 690 passive crossovers. This configuration provides a practical upgrade path for vehicles that need separate high-frequency placement rather than a coaxial speaker.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power handling, the APK690 presents a 4-ohm load to the audio system. Its specified system frequency response is 40 Hz to 20 kHz, covering bass and midrange output from the wofer section along with high-frequency extension from the separate tweeters. The woofer sensitivity is rated at 95 dB SPL.\u003c\/p\u003e\u003cp\u003eThe AP 690 woofer uses a 25 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized with Klippel R\u0026amp;D Scan Vibrometer measurements. A Triple Wave surround is used to support linear cone excursion, while the compact basket is intended to help with OEM-style door installations.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter has a 26 mm diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to help compensate for in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM mounting locations. The separate tweeter arrangement gives installers flexibility to retain or improve factory high-frequency speaker positions.\u003c\/p\u003e\u003cp\u003eEach system uses an APCX TW 690 crossover, which applies a 6 dB-per-octave high-pass filter at 3.3 kHz for the tweeter. The compact crossover includes a 0 dB or +3 dB tweeter-level setting for adjustment after installation. The APK690 can be used as part of a factory-radio upgrade or paired with a compatible 4-ohm aftermarket amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible vehicle-specific placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports systems rated up to 100 watts continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e APCX TW 690 networks manage tweeter filtering and level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Choose 0 dB or +3 dB tweeter attenuation settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Treated woofer cone is designed for door-speaker environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Woofer Coil:\u003c\/strong\u003e 25 mm voice coil supports power handling and cone control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 690 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its 90 x 32 x 15 mm woofer magnet and 25 mm voice coil are paired with a treated paper cone and Triple Wave surround. The AP 1 tweeter uses a 26 mm diaphragm, while the compact APCX TW 690 crossover measures 46.5 x 37.5 x 20.1 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6 x 9-inch elliptical woofer and has adequate mounting clearance before purchase. Install the AP 1 tweeters and AP 690 woofers through the supplied APCX TW 690 crossovers; the crossover's fast-on connectors are intended to simplify correct connections. Match the system to a compatible 4-ohm amplifier or speaker channel, and use the 0 dB or +3 dB tweeter setting to suit the final mounting location.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614227554374,"sku":"APK690","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-VOSfKKVL.jpg?v=1784362949"},{"product_id":"audison-apx4-4-2-way-coaxial-speakers","title":"Audison APX4 4\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX4 is a pair of 4-inch, 2-way coaxial car speakers designed for compact factory speaker locations. Its integrated woofer and tweeter arrangement provides a space-conscious way to upgrade systems that use 100 mm speakers. With a 4-ohm load and 40 watts of continuous power handling, it is suited to factory-radio upgrades or properly matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA concentric coaxial tweeter places the high-frequency driver at the center of the woofer for a single sound-emission point. This design is intended to support consistent phase response and a focused acoustic image from typical vehicle speaker positions. The tweeter also uses an acoustic lens designed for linear response in off-axis installations.\u003c\/p\u003e\u003cp\u003eThe APX4 covers a specified 80 Hz to 23 kHz frequency range, with 91 dB SPL sensitivity. Its compact format is useful where a larger door speaker will not fit or where an OEM-sized 4-inch opening is available. The 120-watt peak rating provides additional short-term power capacity when paired with a suitable audio system.\u003c\/p\u003e\u003cp\u003eAudison uses a water-repellent treated paper woofer cone with a profile developed through FEM simulation and optimized with Klippel Scan Vibrometer testing. The TPU surround uses the shallow Triple Wave profile to support excursion linearity. A 32 mm pure-copper woofer voice coil is paired with a 15 mm tweeter voice coil.\u003c\/p\u003e\u003cp\u003eFor installation flexibility, the APX4 uses a low-profile basket and has a 41 mm mounting depth. It can be considered for factory-location replacements where its mounting dimensions and 4-ohm impedance match the vehicle's requirements. Verify the available opening, mounting depth, wiring, and amplifier or head-unit compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter into one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Woofer:\u003c\/strong\u003e Fits applications designed around a 4-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric Tweeter:\u003c\/strong\u003e Uses a single sound-emission point for coherent driver alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Handling:\u003c\/strong\u003e Matches modest factory-radio or aftermarket amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave Surround:\u003c\/strong\u003e TPU surround profile supports controlled cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e41 mm Mounting Depth:\u003c\/strong\u003e Low-profile format helps with OEM-location installation planning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX4 uses a water-repellent treated paper cone, a TPU surround, and a compact basket with abrasion-resistant, scratch-proof coating. Its motor is secured with damping epoxy adhesive. High-current fast-on terminals use double contacts on both positive and negative poles, with a temperature-resistant plastic terminal cover.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 100 mm speaker and provides at least the required 41 mm mounting depth before purchase. Observe speaker polarity when connecting the terminals, securely fasten the speakers to the vehicle structure, and keep wiring away from sharp edges, moving parts, heat sources, moisture, and vehicle electrical equipment. Protective grilles are not included; APG 4 grilles are available separately.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614232862790,"sku":"APX4","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71mrSm2nWzL.jpg?v=1784363186"},{"product_id":"audison-apx5-5-25-2-way-coaxial-speakers","title":"Audison APX5 5.25\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX5 is a 130 mm two-way coaxial speaker designed for compact factory-location upgrades in vehicle doors or rear panels. It combines a woofer and centrally mounted tweeter in one assembly, helping simplify installation where separate component speakers are not practical. With a 4-ohm nominal impedance and 50 W continuous power handling, it is suited to compatible factory radios or modest external amplification.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners seeking a clearer, more coherent upgrade from worn or basic OEM speakers while retaining a straightforward coaxial layout. Its concentric tweeter places high-frequency output at the same acoustic center as the woofer. Audison designs this arrangement to support a consistent in-phase response and soundstage presentation.\u003c\/p\u003e\u003cp\u003eThe APX5 uses a 5-inch-class woofer with a stated frequency response of 70 Hz to 23 kHz and 93 dB sensitivity. That range supports midbass and treble reproduction for full-range door or rear-fill duties, while a subwoofer can handle the lowest bass frequencies in a larger system. Its 150 W peak rating provides additional short-term power capacity beyond the 50 W continuous rating.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone and TPU Triple Wave suspension are used in the woofer assembly. The shallow suspension profile is engineered for linear excursion, with a stated Xmax of 2 mm. A 32 mm pure-copper woofer voice coil supports power handling and low-frequency control.\u003c\/p\u003e\u003cp\u003eThe APX5 is part of Audison's Prima speaker range and can be used as a direct-fit-style replacement when vehicle dimensions allow. Its low-profile basket and 48 mm mounting-depth dimension are intended to aid OEM integration. For systems needing added protection or a finished appearance, Audison lists the APG 5 protective grille set as a compatible accessory.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric Tweeter:\u003c\/strong\u003e Helps maintain a single acoustic emission point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 W Continuous Handling:\u003c\/strong\u003e Matches compatible factory radios and modest amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e93 dB Sensitivity:\u003c\/strong\u003e Supports useful output from moderate available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave Suspension:\u003c\/strong\u003e Supports controlled, linear woofer excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds durability for typical vehicle-door environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX5 uses a compact, abrasion-resistant and scratch-resistant coated basket with the motor secured using damping epoxy adhesive. Its woofer combines a treated paper cone, TPU surround, and 32 mm pure-copper voice coil. The integrated 24 mm tweeter includes an acoustic lens intended to maintain linear response in off-axis in-door placement.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm speaker and verify the available mounting opening, outer diameter, and depth before ordering. Audison lists dimensions of 119 mm for B, 48 mm for D, and 51 mm for C; installers should compare these measurements with the factory location and any adapter requirements. Connect the speakers to a compatible 4-ohm source and avoid exceeding the 50 W continuous power rating.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614233223238,"sku":"APX5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UQIenvESL.jpg?v=1784363228"},{"product_id":"audison-apx570-5-x-7-2-way-coaxial-speakers","title":"Audison APX570 5 x 7\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX570 is a pair of 5 x 7-inch, 2-way coaxial car speakers designed for replacement or upgrade use in compatible factory speaker locations. Its coaxial layout combines the woofer and tweeter into one assembly, helping simplify installations where separate tweeter mounting is not practical. With a 4-ohm impedance and 70-watt continuous power handling, it is suited to systems using a compatible factory radio or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA concentric 24 mm tweeter is positioned within the woofer so both drivers share a single point of sound emission. This arrangement is intended to support a more consistent phase response between high and low frequencies. An integrated acoustic lens is used to help maintain a linear response when the speakers are installed off-axis in vehicle doors.\u003c\/p\u003e\u003cp\u003eThe APX570 uses a water-repellent treated paper cone and a TPU surround with Audison's shallow Triple Wave profile. The surround profile is engineered to support linear cone excursion, while the 32 mm pure-copper woofer voice coil is designed for power handling and low-frequency control. Its published frequency response is 60 Hz to 23 kHz, with 93 dB sensitivity.\u003c\/p\u003e\u003cp\u003eFor OEM-oriented installations, the APX570 uses a compact, low-profile basket and a 63 mm mounting depth. The oval 5 x 7-inch format can suit vehicles equipped for this speaker shape, provided the factory opening, mounting pattern, window clearance, and connector arrangement are checked before installation. The speakers use high-current fast-on terminals with double contacts for both positive and negative connections.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a direct coaxial replacement where a compact all-in-one design is preferred over a separate component system. They are a practical match for listeners seeking an Audison Prima-series speaker upgrade without adding external tweeters or crossover housings. Grilles are not included, so installations behind factory door panels or with separately sourced grilles should be planned accordingly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 24 mm Tweeter:\u003c\/strong\u003e Uses a single emission point for consistent driver alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Continuous Handling:\u003c\/strong\u003e Supports compatible amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Helps support linear cone movement during excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds moisture resistance for typical door installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Basket:\u003c\/strong\u003e Supports OEM-oriented installation with a 63 mm mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX570 has a water-repellent treated paper cone, TPU surround, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The centered tweeter incorporates an acoustic lens, and the speaker was developed using the KLIPPEL suite.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 5 x 7-inch speakers and compare the factory opening with the APX570's 182 x 126 mm mounting-hole dimensions before ordering. Allow for the published 63 mm mounting depth and verify clearance behind the mounting surface, including window travel in doors. Use the double-contact fast-on terminals with correct polarity, and note that grilles are not included.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614233714758,"sku":"APX570","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ywmFTbmVL.jpg?v=1784363272"},{"product_id":"audison-av1-1ii-1-1-tweeter-set","title":"Audison AV1-1II 1.1\" Tweeter Set","description":"\u003cp\u003eThe Audison AV1-1II is a pair of 28 mm (1.1 in.) Voce II component tweeters designed to upgrade the high-frequency range of a car audio system. It is intended for systems that need clearer treble detail, more controlled upper-frequency output, and flexible mounting options. With a 4-ohm nominal impedance, the AV1-1II is suited to appropriately configured aftermarket speaker systems.\u003c\/p\u003e\u003cp\u003eIts Hi-Res Audio certification and 1,000 to 40,000 Hz frequency-response specification support extended high-frequency playback. The larger 28 mm Tetolon soft dome is designed to provide smooth, natural treble character while maintaining useful off-axis response in vehicle cabins. This makes it a practical choice for dash, sail-panel, or A-pillar locations where listeners are not directly on-axis with the tweeters.\u003c\/p\u003e\u003cp\u003eA 28 mm CCAW voice coil is wound on an aluminum former and paired with a neodymium magnetic motor. This combination is engineered for low moving mass, thermal stability, and controlled transient response. Audison specifies a 900 Hz resonant frequency and 91 dB sensitivity for the AV1-1II.\u003c\/p\u003e\u003cp\u003eThe AV1-1II uses Audison AIF (Any Install Faceplate) technology to support different mounting approaches. Included mounting hardware includes a watch-band mount, double-angle cup, flush-mounting ring, and metal mounting spring. Mesh and spoke grille options provide additional installation and appearance flexibility.\u003c\/p\u003e\u003cp\u003eFor an active DSP-based system, Audison recommends high-pass filtering the AV1-1II as low as 1,800 Hz with a 24 dB\/octave Linkwitz-Riley slope when paired in a two-way system with a 6.5-inch woofer. When used with a smaller midrange such as the AV 3.0 II, Audison recommends a crossover point around 3,000 Hz. The tweeters can also be used as part of compatible Voce II passive or active component-system configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certified:\u003c\/strong\u003e Supports extended response up to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Dome:\u003c\/strong\u003e Delivers smooth and natural high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Helps reduce moving mass and dynamic compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Provides a compact, high-flux magnetic assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplate System:\u003c\/strong\u003e Supports multiple mounting and aiming options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Grade Connector:\u003c\/strong\u003e Enables convenient serviceable wiring connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV1-1II combines a Tetolon-fibre dome and surround with a 28 mm CCAW voice coil, aluminum former, and neodymium magnet. It does not use ferrofluid. The supplied faceplates, mounting accessories, grille options, pre-wired P\u0026amp;P cable, and Audison logo badges support a tailored installation.\u003c\/p\u003e\u003cp\u003eUse the included flush ring, watch-band mount, double-angle cup, or metal spring according to the available vehicle location and desired aiming. The tweeter provides standard terminals plus an OEM-grade two-pin connection, with a matching bare-wire pigtail included for connection by solder or mechanical crimp. Use an appropriate high-pass crossover; for active DSP systems, Audison recommends 1,800 Hz at 24 dB\/octave in a two-way alignment with a 6.5-inch woofer.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614237155398,"sku":"AV1-1II","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81zalMdi5RL.jpg?v=1784363486"},{"product_id":"audison-av-3-0-ii-3-midrange-speakers","title":"Audison AV 3.0 II 3\" Midrange Speakers","description":"\u003cp\u003eThe Audison AV 3.0 II is a compact 70 mm midrange speaker designed to reproduce the vocal and instrument range in an upgraded car audio system. It is intended for systems where a dedicated midrange driver can improve placement and detail compared with relying on a door woofer alone. Its compact format supports installations where space is limited, including suitable door and A-pillar locations.\u003c\/p\u003e\u003cp\u003eThis speaker is a practical choice for builders assembling a three-way front stage with separate tweeters and woofers. Its 50 W continuous power handling and 90 dB sensitivity make it suitable for a properly configured amplified system. The AV 3.0 II is engineered for controlled mid-frequency output from 160 Hz to 13 kHz.\u003c\/p\u003e\u003cp\u003eA semi-pressed paper cone with cotton fibers combines low mass with mechanical damping for natural midrange reproduction. The rubber surround and optimized suspension are designed to support controlled cone movement. FEM-designed cone geometry is used to promote more consistent dispersion for listeners seated off-axis in a vehicle cabin.\u003c\/p\u003e\u003cp\u003eThe AV 3.0 II uses a 26 mm CCAW voice coil, neodymium motor, and built-in copper shorting ring. This motor arrangement is designed to reduce inductance modulation and support upper-midrange extension. Its die-cast aluminum basket provides a rigid chassis structure while the compact motor layout keeps mounting depth to 31.2 mm.\u003c\/p\u003e\u003cp\u003eFor system integration, the AV 3.0 II provides both conventional terminals and an OEM-style two-pin connector with an included bare-wire pigtail. A black mesh metal grille is included to protect the driver after installation. It is designed to work as a dedicated midrange in an actively filtered system or with an appropriately matched three-way crossover network.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 mm Midrange Driver:\u003c\/strong\u003e Adds a dedicated driver for vocals, instruments, and central soundstage detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-Pressed Paper Cone:\u003c\/strong\u003e Cotton-fiber pulp construction balances low mass, rigidity, and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 mm CCAW Voice Coil:\u003c\/strong\u003e Supports efficient motor control and heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Shorting Ring:\u003c\/strong\u003e Reduces inductance modulation for clearer upper-midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Delivers magnetic strength in a compact mounting format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Connection Options:\u003c\/strong\u003e OEM-style connector and standard terminals simplify system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 3.0 II combines an aluminum chassis, neodymium magnet, glass-fiber voice-coil former, semi-pressed paper cone, and rubber surround. Its die-cast basket is designed for rigidity and airflow around the moving assembly. The included black mesh grille protects the speaker, while optional AVG 3.0 S II silver grilles provide an alternate appearance.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space against the 84 mm outer diameter and 31.2 mm mounting depth before installation. The supplied OEM-style pigtail can be soldered or crimped to vehicle speaker wiring, while standard terminals remain available as an alternative. For active DSP systems, Audison recommends a 300-500 Hz Linkwitz-Riley high-pass filter at 24 dB\/octave, with a symmetrical low-pass filter set at the tweeter's high-pass frequency.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614237581382,"sku":"AV3-0II","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71QWvVq3cjL.jpg?v=1784363532"},{"product_id":"audison-avk-6a-p-ii-6-5-2-way-active-speaker-kit","title":"Audison AVK 6A P II 6.5\" 2-Way Active Speaker Kit","description":"\u003cp\u003eThe Audison AVK 6A P II is a 6.5-inch two-way active component speaker kit built around separate AV 6.5 P II mid-bass drivers and AV 1.1 II tweeters. It is intended for vehicle audio systems using an active crossover, DSP, or separate amplifier channels rather than an included passive crossover network. This configuration gives an installer control over crossover frequency, level, time alignment, and equalization.\u003c\/p\u003e\u003cp\u003eThe AV 6.5 P II woofer is rated for 150 watts continuous power handling and uses a 40 mm CCAW voice coil. Its 45-7,500 Hz frequency response, pressed paper cone, ferrite motor, and 4-ohm nominal impedance support use as the mid-bass foundation of an active front stage. The woofer is designed to cover bass and midrange duties before handing off to the separate tweeter.\u003c\/p\u003e\u003cp\u003eThe AV 1.1 II tweeter uses a 28 mm Tetolon fiber dome and has a stated frequency response of 1,000-40,000 Hz. It is Hi-Res Audio compliant under the stated JAS\/IEC 60268-5 test condition. Its extended upper-frequency range and separate mounting hardware help accommodate typical off-axis vehicle placements.\u003c\/p\u003e\u003cp\u003eBecause this is the active version of the AVK 6 P II system, no passive crossovers are included. Audison recommends a 24 dB\/octave Linkwitz-Riley high-pass filter as low as 1,800 Hz for the AV 1.1 II when paired in a two-way system with a 6.5-inch woofer. The AV 6.5 P II can be high-pass filtered as low as 70 Hz with the same filter alignment.\u003c\/p\u003e\u003cp\u003eThe kit is suited to enthusiasts and installers assembling a DSP-based front-stage upgrade with independent woofer and tweeter channels. OEM-style two-pin connectors and standard terminals provide wiring flexibility, while supplied pigtail wiring supports service-friendly disconnection. Optional Audison AVG 6.5 B II or AVG 6.5 S II grilles are available separately for the woofers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Two-Way Configuration:\u003c\/strong\u003e Separates woofer and tweeter filtering for DSP-based system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous Woofer Rating:\u003c\/strong\u003e Supports substantial mid-bass power handling with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm CCAW Woofer Coil:\u003c\/strong\u003e Helps support excursion capability and heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Inductance Motor Design:\u003c\/strong\u003e Aluminum shorting ring supports cleaner upper-midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting System:\u003c\/strong\u003e Faceplates and multiple mounting accessories aid installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 P II combines a die-cast aluminum basket, magnet cover, high-density-flux ferrite magnet, pressed paper cone, and butyl rubber surround. Its motor incorporates an aluminum shorting ring, while the 28 mm AV 1.1 II tweeter uses a Tetolon fiber dome and neodymium magnet. The woofer has a 165 mm overall diameter, a 140.8 mm Dimension B measurement, and a 74.2 mm Dimension C measurement; installation clearance should be verified against the vehicle and the supplied dimensional drawing.\u003c\/p\u003e\u003cp\u003eThis kit needs an active crossover solution such as a DSP and separate amplified channels for the tweeters and woofers, because passive crossovers are not supplied. Audison specifies 24 dB\/octave Linkwitz-Riley filtering, with the tweeter high-passed from 1,800 Hz in a two-way alignment and the woofer high-passed from 70 Hz. The package includes woofer and tweeter drivers, faceplates, four tweeter mounting accessories, a plug-and-play cable, and Audison logo badges.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614241873990,"sku":"AVK6APII","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TLlGEKfLL.jpg?v=1784363738"},{"product_id":"audison-avk6sii-6-5-2-way-component-speaker-kit","title":"Audison AVK6SII 6.5\" 2-Way Component Speaker Kit","description":"\u003cp\u003eThe Audison AVK6SII is a 6.5-inch, 2-way component speaker kit designed for a front-stage car audio upgrade. It pairs separate AV 6.5 S II mid-bass woofers with AV 1.0 II tweeters and dedicated passive crossover networks. The separate-driver layout allows the tweeters to be positioned higher in the cabin while the woofers fit typical door or kick-panel locations.\u003c\/p\u003e\u003cp\u003eThis kit is intended for listeners who want more controlled mid-bass, clearer vocals, and extended treble than a coaxial or factory speaker arrangement can typically provide. The 6.5-inch woofers are rated for 125 watts continuous power each and use a 36 mm CCAW voice coil. Their 50 Hz to 5.5 kHz operating range supports use as the mid-bass foundation of a two-way front stage.\u003c\/p\u003e\u003cp\u003eThe AV 1.0 II tweeters use 25.4 mm Tetolon fiber domes and are Hi-Res Audio certified with response specified to 40 kHz. Their compact form and supplied mounting hardware support flush, angled, and surface-oriented placement choices. This can be useful where factory sail panels, A-pillars, or custom tweeter locations place the listener off-axis.\u003c\/p\u003e\u003cp\u003eAudison separates the passive networks into an AVCX 2 W low-pass crossover for each woofer and an AVCX 2 T high-pass crossover for each tweeter. The woofer section uses a 6 dB\/octave low-pass network, while the tweeter section uses a 12 dB\/octave high-pass network. The crossover system is set around 3.5 kHz with the woofer Mid-Contour control off, and it provides adjustments for tweeter output and woofer mid-contour response.\u003c\/p\u003e\u003cp\u003eThe AVK6SII is suitable for a passive two-channel installation or for a system planned around bi-amplification. It includes plug-and-play speaker pigtails alongside standard speaker terminals, which can simplify serviceability and vehicle integration. For an active DSP-based installation, Audison specifies a 3 kHz, 24 dB\/octave high-pass point for the AV 1.0 II tweeter and a 70 Hz, 24 dB\/octave high-pass point for the AV 6.5 S II woofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support more flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125 W Continuous Woofer Rating:\u003c\/strong\u003e Supports matching with appropriately powered external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res AV 1.0 II Tweeters:\u003c\/strong\u003e Extends high-frequency response to a specified 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Woofer Voice Coil:\u003c\/strong\u003e A 36 mm coil supports excursion and thermal handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Dedicated woofer and tweeter networks simplify component placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Response Controls:\u003c\/strong\u003e Adjust tweeter level and woofer mid-contour for the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 S II woofer combines a pressed paper cone, butyl rubber surround, die-cast aluminum basket, and high-density-flux ferrite magnet assembly. Its motor includes an aluminum shorting ring to reduce inductance, while the 36 mm copper-clad aluminum voice coil is paired with a compact 61 mm mounting-depth specification. The AV 1.0 II uses a Tetolon fiber dome and AIF faceplate system with four supplied faceplates.\u003c\/p\u003e\u003cp\u003eConfirm available door clearance and the required 140.8 mm woofer mounting opening before installation; the woofer has a 165 mm outside diameter and 61 mm mounting depth. Install each AVCX 2 W and AVCX 2 T crossover in a dry, secure location and follow the labeled wiring layout for passive or bi-amplified operation. The kit includes mounting options for the tweeters, plus OEM-style two-pin pigtails that may be soldered or crimped to vehicle wiring.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242234438,"sku":"AVK6SII","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ql6H74ILL.jpg?v=1784363782"},{"product_id":"audison-avx-6-5-ii-6-5-2-way-coaxial-speakers","title":"Audison AVX 6.5 II 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison AVX 6.5 II is a 6.5-inch, 2-way coaxial speaker set from the VOCE II line. It combines a 165 mm woofer and centrally mounted 25.4 mm dome tweeter in each speaker, providing a compact solution where separate tweeter locations are not practical. The set is intended for vehicle audio upgrades that need broad bandwidth and a cohesive point-source layout.\u003c\/p\u003e\u003cp\u003eIts coaxial architecture places the tweeter at the center of the woofer, helping the two drivers originate sound from the same location. This is useful in door, rear-deck, or factory-style speaker positions where listening angles vary. The rated low-frequency response extends from 45 Hz, while high-frequency response reaches 40 kHz.\u003c\/p\u003e\u003cp\u003eThe woofer uses a semi-pressed paper cone, rubber surround, aluminum chassis, 40 mm CCAW voice coil, and high-density-flux ferrite magnet. The central tweeter uses a Tetolon fibre dome and surround, 25 mm CCAW voice coil, and neodymium magnet. These materials support the AVX 6.5 II's wide operating range in a compact coaxial format.\u003c\/p\u003e\u003cp\u003eAudison supplies separate passive crossover modules for the woofer and tweeter: AVCX 2 XW and AVCX 2 XT. This separates the filtering duties rather than using a single shared inline network. The speaker can alternatively be used in an active two-way system with DSP-based filtering and separate amplifier channels for the woofer and tweeter sections.\u003c\/p\u003e\u003cp\u003eThe AVX 6.5 II suits installations seeking an upgraded 6.5-inch coaxial solution with passive-crossover flexibility and an active-system upgrade path. OEM-style 2-pin connectors with bare-wire pigtails are included for serviceable vehicle wiring, while conventional speaker terminals remain available. Confirm available mounting clearance and the vehicle's speaker mounting arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one vehicle-friendly speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certification:\u003c\/strong\u003e Supports high-frequency reproduction extending to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 1-Inch Tweeter:\u003c\/strong\u003e Centers the tweeter within the woofer for point-source emission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Includes dedicated AVCX 2 XW and AVCX 2 XT modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive-System Capability:\u003c\/strong\u003e Supports DSP-based active two-way filtering and tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Connections:\u003c\/strong\u003e Includes 2-pin pigtail connectors for serviceable vehicle wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVX 6.5 II uses an aluminum chassis, semi-pressed paper woofer cone, rubber surround, ferrite woofer motor, and neodymium tweeter motor. Its 25.4 mm Tetolon fibre dome tweeter is mounted concentrically, and the woofer uses a 40 mm CCAW voice coil on a glass-fiber former. Overall dimension A is 165 mm, with a listed overall depth of 74.2 mm.\u003c\/p\u003e\u003cp\u003eFor passive operation, connect the woofer and tweeter sections through the included AVCX 2 XW and AVCX 2 XT crossover modules. For an active DSP installation, Audison recommends a 70 Hz high-pass filter for the woofer and a 3 kHz high-pass point for the tweeter, both using 24 dB\/octave Linkwitz-Riley filters. Check mounting depth, mounting diameter, wiring polarity, and amplifier capability before fitting the speakers.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242889798,"sku":"AVX6-5II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_wdvghMlL.jpg?v=1784363838"},{"product_id":"audison-c2o-coaxial-to-optical-audio-converter","title":"Audison C2O Coaxial-to-Optical Audio Converter","description":"\u003cp\u003eThe Audison C2O is a compact car-audio interface that converts either a coaxial S\/PDIF digital source or an analog AUX source into a TOSLINK optical digital output. It helps connect portable music players and smartphones to a compatible processor or other component with an optical digital input. This makes it useful when the source device and the receiving audio component use different digital connection formats.\u003c\/p\u003e\u003cp\u003eThe C2O accepts a 75-ohm electrical coaxial S\/PDIF signal at resolutions up to 24-bit\/192 kHz. Its optical output preserves the incoming digital signal path at up to 24-bit\/192 kHz when using the coaxial input. For an analog source, it converts the incoming signal to a 24-bit\/48 kHz optical output.\u003c\/p\u003e\u003cp\u003eAn adjustable analog input stage accommodates source levels from 0.1 to 2 Vrms. The analog AUX input uses a 3.5 mm stereo jack that supports 3-pole and 4-pole plugs, making it suited to many portable devices. Analog-input performance is specified at 0.002% THD, a 5 Hz to 24 kHz bandwidth, and a 105 dB A-weighted signal-to-noise ratio.\u003c\/p\u003e\u003cp\u003eThe C2O automatically manages its two inputs, with analog AUX assigned priority when both sources are present. When the analog signal stops, it can switch to the coaxial digital input after 6, 9, or 12 seconds; 6 seconds is the default setting. This arrangement can simplify a system using both a portable analog device and a dedicated coaxial digital player.\u003c\/p\u003e\u003cp\u003eIts coaxial input includes an isolation transformer intended to reduce susceptibility to electromagnetic interference in a vehicle environment. The compact 69 x 26 x 54.5 mm housing can be positioned close to the source device to keep signal cabling short. It is designed for 6 to 30 VDC vehicle electrical systems and can be activated by a conventional remote signal or a +12V remote connection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial-to-Optical Conversion:\u003c\/strong\u003e Converts electrical coaxial S\/PDIF audio to a TOSLINK optical output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog AUX Conversion:\u003c\/strong\u003e Converts a 3.5 mm analog source to 24-bit\/48 kHz optical audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz Support:\u003c\/strong\u003e Passes compatible coaxial digital sources to optical at high resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable AUX Level:\u003c\/strong\u003e Matches analog source levels from 0.1 to 2 Vrms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Input Selection:\u003c\/strong\u003e Gives AUX priority and switches to digital after a selectable delay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolated Coaxial Input:\u003c\/strong\u003e Uses an isolation transformer to help reduce EMI-related noise.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C2O uses a small interface enclosure measuring 69 mm wide, 26 mm high, and 54.5 mm deep, with a listed weight of 0.048 kg. Its connection layout provides a 3.5 mm analog input, electrical coaxial S\/PDIF input, and optical output. An internal selector sets the analog-input level and the delay before digital-input activation.\u003c\/p\u003e\u003cp\u003eInstall the C2O in a dry, protected location with access to the source device and the receiving component's optical input. Use a 75-ohm coaxial cable for a coaxial digital source and a TOSLINK cable no longer than 4.5 m for the optical connection. Confirm that the receiving processor or device accepts the output resolution associated with the selected source, then connect vehicle power, ground, and the appropriate remote turn-on wiring.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614250426438,"sku":"C2O","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/611SNzFOZ3L.jpg?v=1784364040"},{"product_id":"cerwin-vega-cvp69-6x9-4-ohm-full-range-speaker","title":"Cerwin-Vega CVP69 6x9\" 4-Ohm Full-Range Speaker","description":"\u003cp\u003eThe Cerwin-Vega CVP69 is a single 6x9-inch PRO Series full-range car speaker designed for vehicle audio systems that need higher output capability than typical factory speakers. Its 4-ohm impedance makes it suitable for common car-audio amplifier channels and compatible system designs. It is intended for custom installations in cars, trucks, SUVs, vans, motorcycles, and other vehicle-based audio applications.\u003c\/p\u003e\u003cp\u003eWith a 150-watt RMS and 300-watt maximum power rating, the CVP69 is built for systems that prioritize strong output and controlled midrange presence. Its 94 dB sensitivity rating helps it produce substantial output from available amplifier power. The published 50 Hz to 20 kHz frequency-response range supports broad-band reproduction from a single pro-style driver.\u003c\/p\u003e\u003cp\u003eThe CVP69 uses a treated paper cone and treated cloth surround to provide a durable moving assembly for high-output use. A 1.5-inch high-temperature, single-layer voice coil supports its stated power handling. Its ferrite motor uses a high-density, high B\/L design intended to maintain driver control under demanding playback conditions.\u003c\/p\u003e\u003cp\u003eA heavy-duty stamped-steel basket provides a rigid mounting platform for the speaker assembly. The driver has a 20-ounce ferrite magnet structure and a 4.53-inch magnet diameter. This construction makes it a practical choice for installations where a pro-driver format and physical durability are priorities.\u003c\/p\u003e\u003cp\u003eThe CVP69 is sold individually, allowing installers to build a matched pair or larger multi-speaker layout as needed. It can be used as part of a high-output system with compatible amplification and optional dedicated tweeters or subwoofers. Verify the vehicle's mounting opening, mounting depth, wiring, and available power before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplifier-powered systems designed around substantial continuous output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch PRO Driver:\u003c\/strong\u003e Fits applications designed for an oval 6x9-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides a lightweight cone material for responsive sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a durable structural base for secure mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP69 combines a treated paper cone, treated cloth surround, ferrite magnet, high-temperature voice coil, and stamped-steel basket. Its pro-driver construction is focused on output capability and mechanical durability. The speaker uses a single 4-ohm voice coil and does not include a grille.\u003c\/p\u003e\u003cp\u003eAllow for an 8.74 x 5.98-inch mounting cutout and 3.07 inches of mounting depth behind the mounting surface. Confirm that the vehicle panel has sufficient clearance for the 9.29 x 6.46-inch overall frame and 3.17-inch total depth. For best results, use secure mounting hardware, correct-polarity speaker wiring, and an amplifier channel matched appropriately to the speaker's 4-ohm load and 150-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614314848326,"sku":"CER-CVP69","price":56.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61uyNrKUwIL.jpg?v=1784366022"},{"product_id":"cerwin-vega-eq770-7-band-parametric-car-audio-equalizer","title":"Cerwin-Vega EQ770 7-Band Parametric Car Audio Equalizer","description":"\u003cp\u003eThe Cerwin-Vega EQ770 is a 7-band car audio equalizer designed to give a compatible mobile audio system more direct control over tonal balance and signal level. It is installed between a source unit and external amplifiers, making it useful when a system needs more tuning flexibility than basic head-unit controls provide. Dedicated front, rear, and subwoofer outputs support a multi-amplifier system layout.\u003c\/p\u003e\u003cp\u003eThis processor is intended for listeners building or refining an amplified car audio system with separate bass control. Its seven EQ controls address fixed center frequencies from 50 Hz through 16 kHz, helping users adjust bass weight, vocal presence, and high-frequency balance. A master volume control and separate subwoofer-level control make it easier to tailor overall and bass output from the front panel.\u003c\/p\u003e\u003cp\u003eThe EQ770 provides up to 7 volts RMS of output for sending a strong preamp-level signal to compatible amplifiers. Its specified 10 Hz to 50 kHz frequency response, 90 dB signal-to-noise ratio, and 70 dB channel separation support clean signal routing within a properly configured system. The unit uses an onboard 30V bipolar switching power supply.\u003c\/p\u003e\u003cp\u003eFor bass-system integration, the EQ770 includes a selectable low-pass frequency setting at 60 Hz or 90 Hz. This provides a simple way to choose the low-pass point used for the subwoofer output. A front-to-rear fader control is also provided for systems using four speakers.\u003c\/p\u003e\u003cp\u003eSource flexibility includes main, auxiliary, and AUX 2\/MP3 input options, with an AUX\/Main source selector and auxiliary gain control. The EQ770 is a practical upgrade for systems using external amplifiers and RCA signal connections. Its night-illumination design keeps the front-panel controls visible during nighttime driving.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Band Equalizer:\u003c\/strong\u003e Adjusts seven fixed frequency ranges for more detailed tonal tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7V RMS Output:\u003c\/strong\u003e Sends a high-level preamp signal to compatible external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Level Control:\u003c\/strong\u003e Adjusts bass-output level independently from the main volume.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Low-Pass Filter:\u003c\/strong\u003e Offers 60 Hz or 90 Hz subwoofer frequency selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Preamp Output Zones:\u003c\/strong\u003e Provides dedicated front, rear, and subwoofer signal outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUX and MP3 Inputs:\u003c\/strong\u003e Adds source options beyond the main audio input.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EQ770 uses a compact under-dash processor layout with front-panel rotary controls for volume, subwoofer level, fader, auxiliary gain, and equalizer adjustment. Its RCA input and output connections are nickel-plated, and the front panel includes night illumination. The control layout places frequently adjusted system settings within easy reach.\u003c\/p\u003e\u003cp\u003eMount the unit beneath the dashboard or on a suitable interior hump using the supplied-style bracket arrangement described in the manual. The wiring diagram routes the main source into the equalizer, then routes front, rear, and subwoofer outputs to their respective external amplifiers; it also requires switched +12V, ground, and remote-turn-on connections. Use the 60 Hz or 90 Hz low-pass selection with the subwoofer amplifier path, then set output levels conservatively during system tuning.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614322057286,"sku":"CER-EQ770","price":151.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51iswd0_9GL.jpg?v=1784366277"},{"product_id":"cerwin-vega-h25-2-5-full-range-car-speakers","title":"Cerwin-Vega H25 2.5\" Full-Range Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H25 is a pair of compact 2.5-inch full-range car speakers for replacing small factory speakers or completing a custom vehicle audio installation. Their compact mounting dimensions suit locations where a larger door or dash speaker will not fit. Each speaker uses a 4-ohm nominal impedance for compatibility with many car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eWith 10 watts RMS and 30 watts maximum power handling per speaker, the H25 is intended for low-power factory-radio or appropriately matched amplified applications. Its 83 Hz to 20 kHz frequency-response specification supports a broad range of musical detail within a small-speaker format. A sensitivity rating of 82 dB at 1W\/1m indicates that proper power matching is important for expected output.\u003c\/p\u003e\u003cp\u003eThe H25 uses a responsive treated paper cone to reproduce the audible range assigned to the speaker. A UV-treated foam surround supports cone movement while helping the assembly withstand normal automotive conditions. The full-range design provides a practical solution where a separate tweeter and crossover system are not required.\u003c\/p\u003e\u003cp\u003eA strontium ferrite magnet motor structure supports the speaker's operation, while the powder-coated stamped-steel basket provides a rigid mounting foundation. This construction is designed to help control unwanted vibration at the speaker frame. The result is a compact replacement speaker focused on clear, direct sound in small factory locations.\u003c\/p\u003e\u003cp\u003eSold as a pair, the H25 can be used for left- and right-channel replacement in compatible vehicle positions. A speaker fitment adapter is included to assist with installation in applicable factory locations. Cerwin-Vega identifies the H25 for drop-in use in select GM, Ford, Chrysler, Jeep, Dodge, and Asian-import factory-speaker locations, but vehicle-specific fitment should always be checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Full-Range Design:\u003c\/strong\u003e Fits compact speaker locations while covering a broad frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides responsive full-range sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and material durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrontium Ferrite Magnet:\u003c\/strong\u003e Provides the speaker's magnetic motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Adapter Included:\u003c\/strong\u003e Helps adapt the speakers for applicable factory locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H25 combines a treated paper cone, UV-treated foam surround, strontium ferrite woofer magnet, and powder-coated stamped-steel basket. Its basket construction provides a stable frame for the compact driver. The set is sold as two speakers for stereo installation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has sufficient space for the 2.36-inch overall diameter, 2.05-inch cutout, 1.26-inch mounting depth, and 1.42-inch overall height before purchase. Match the speakers to a 4-ohm audio system and keep amplifier power appropriate for the 10-watt RMS rating per speaker. The included fitment adapter may assist in compatible factory locations, though mounting and wiring requirements vary by vehicle.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614330904646,"sku":"CER-H25","price":89.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61K0-6ZdeRL.jpg?v=1784366396"},{"product_id":"cerwin-vega-h35-3-5-2-way-coaxial-speakers","title":"Cerwin-Vega H35 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H35 is a pair of compact 3.5-inch, 2-way coaxial car speakers designed for replacing factory speakers in space-limited locations. Each speaker combines a woofer and tweeter in one assembly, helping simplify a full-range speaker upgrade. It is suited to vehicles with compatible 3.5-inch factory locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith 40 watts RMS and 120 watts maximum power handling per speaker, the H35 is intended for use with a compatible factory radio or an appropriately matched aftermarket amplifier. Its 4-ohm nominal impedance suits common car-audio speaker circuits. The 84 Hz to 20 kHz published frequency response covers midrange and high-frequency duties in a compact format.\u003c\/p\u003e\u003cp\u003eThe H35 uses a responsive polypropylene woofer cone with a UV-treated foam surround. This material combination is designed to support controlled cone movement while adding resistance to sun-related wear. A strontium ferrite woofer magnet provides the motor structure for the woofer section.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI balanced-dome tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter. Built-in tweeter protection is included to help protect the high-frequency driver during demanding playback.\u003c\/p\u003e\u003cp\u003eFor a clean installation, the H35 has a 3.11-inch cutout requirement and a 1.54-inch mounting depth. Its rigid stamped-steel basket is powder coated, and the pair does not include grilles according to the manufacturer specification chart. Confirm vehicle-specific fitment, panel clearance, and mounting-hole alignment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports power matching with compatible head units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a lightweight cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Helps support long-term durability in vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Routes frequencies between drivers and protects the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H35 uses a powder-coated, rigid stamped-steel basket with a strontium ferrite woofer magnet. Its woofer uses a polypropylene cone and UV-treated foam surround, while the centrally mounted PEI balanced-dome tweeter uses a neodymium magnet. The set is sold as a pair and is specified without grilles.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 3.11-inch cutout, 1.54-inch mounting depth, and 3.43-inch speaker diameter before ordering. Mount the speakers securely to a flat baffle and seal the frame to reduce air leaks around the mounting surface. Observe speaker polarity when wiring and use an amplifier or receiver compatible with 4-ohm speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614349189190,"sku":"CER-H35","price":73.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_IM6REBML.jpg?v=1784366746"},{"product_id":"cerwin-vega-h40-4-2-way-coaxial-speaker-set","title":"Cerwin-Vega H40 4\" 2-Way Coaxial Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H40 is a pair of 4-inch, 2-way coaxial car speakers designed to replace compact factory speakers or support a custom full-range audio upgrade. Its coaxial layout places the tweeter and woofer together, helping simplify installation where space is limited. The set is intended for vehicle locations that accept a 4-inch speaker and have sufficient mounting clearance.\u003c\/p\u003e\u003cp\u003eRated at 50 watts RMS and 150 watts maximum, the H40 is suited to systems using a compatible factory radio or aftermarket amplification. Its 4-ohm nominal impedance matches the common impedance used by many car-audio speaker systems. The 85 Hz to 20 kHz frequency response focuses on midrange and high-frequency reproduction, with bass support available from larger speakers or a subwoofer when desired.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles the main vocal, midrange, and upper-bass duties. The UV-treated foam surround supports cone movement and is designed for durability in automotive use. With an 84 dB sensitivity rating, proper power matching and clean signal setup are important for getting the most from the speakers.\u003c\/p\u003e\u003cp\u003eThe H40 uses a dynamically balanced 1\/2-inch PEI tweeter with a neodymium magnet for high-frequency reproduction. An integrated crossover directs frequencies between the woofer and tweeter, while built-in tweeter protection helps safeguard the high-frequency driver. This design keeps the system compact without requiring an external crossover module.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the H40 can serve in dash, door, or other compact factory speaker positions when the vehicle's fitment and clearances match its measurements. It is sold as a stereo pair and includes mesh steel grilles for installations where the speakers are exposed. Confirm the 3.70-inch cutout requirement and 1.81-inch mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Rating:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides responsive midrange and upper-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2-Inch PEI Tweeter:\u003c\/strong\u003e Handles high frequencies in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Protection:\u003c\/strong\u003e Helps protect the tweeter during high-level playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Steel Grilles Included:\u003c\/strong\u003e Adds protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H40 uses a powder-coated, rigid stamped steel basket, a polypropylene cone, and a UV-treated foam surround. Its woofer uses a strontium ferrite magnet, while the tweeter uses a neodymium magnet. These materials support a compact, vehicle-oriented speaker design.\u003c\/p\u003e\u003cp\u003eMeasure the vehicle's opening, panel clearance, and window or mechanism clearance before mounting. The required cutout diameter is 94 mm (3.70 inches), and mounting depth is 46 mm (1.81 inches). Mount the speaker securely to a flat baffle, seal around the frame to reduce air leaks, observe polarity, and use a grommet where speaker wire passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614356267078,"sku":"CER-H40","price":86.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71k-d65oJQL.jpg?v=1784366793"},{"product_id":"cerwin-vega-h410-4x10-2-way-coaxial-speakers","title":"Cerwin-Vega H410 4\"x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H410 is a 4-inch by 10-inch, 2-way coaxial full-range speaker set for replacing compatible factory car speakers. It combines a woofer and tweeter in each speaker to cover bass, midrange, and high-frequency content from one mounting location. The set is sold as a pair for a matched left-and-right speaker upgrade.\u003c\/p\u003e\u003cp\u003eDesigned for vehicles using the uncommon 4-inch by 10-inch speaker format, the H410 helps retain a factory-style fit while updating worn or limited original speakers. Its 4-ohm nominal impedance suits typical mobile-audio speaker applications. Confirm the vehicle's opening dimensions, mounting depth, and panel clearance before installation.\u003c\/p\u003e\u003cp\u003eThe H410 is rated for 70 watts RMS and 210 watts maximum power handling. With a 90 Hz to 20 kHz frequency response and 89 dB sensitivity at 1 watt\/1 meter, it is intended for full-range playback in an appropriate vehicle installation. It can be used as part of a basic speaker replacement or in a system supported by a properly matched amplifier.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and UV-treated foam surround form the low- and mid-frequency section of each speaker. The coaxial 1-inch PEI tweeter is dynamically balanced and uses a neodymium magnet. An integrated crossover directs frequencies between the woofer and tweeter while providing tweeter protection.\u003c\/p\u003e\u003cp\u003eFor structural support, the H410 uses a rigid stamped-steel basket with a powder-coated finish and a strontium ferrite woofer magnet. Its 2.36-inch mounting depth can be useful where rear-deck or door-panel space is limited, but depth behind the mounting surface must be checked. The speakers do not include grilles according to the manufacturer specification table.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\"x10\" Coaxial Format:\u003c\/strong\u003e Fits compatible oval speaker openings with integrated full-range drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Separates woofer and tweeter frequency duties internally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and durability in vehicle use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H410 combines a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and neodymium tweeter magnet. Its rigid stamped-steel basket is powder coated, and the coaxial layout places the tweeter within the woofer assembly. This construction is designed for a conventional full-range vehicle-speaker installation.\u003c\/p\u003e\u003cp\u003eUse the 9.41-inch by 3.78-inch cutout requirement, 10.90-inch by 4.33-inch overall frame size, and 2.36-inch mounting depth to verify fitment. Mount the speakers securely to a flat baffle and seal the frame to help prevent air leaks; check window, trim-panel, and structural clearance before cutting. Observe speaker polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614358888518,"sku":"CER-H410","price":112.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71eb9fvlruL.jpg?v=1784366835"},{"product_id":"cerwin-vega-h46-4x6-2-way-coaxial-speakers","title":"Cerwin-Vega H46 4\"x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H46 is a pair of 4\" x 6\" 2-way coaxial full-range car speakers for replacing compatible factory speakers or refreshing an existing vehicle audio system. Its compact oval format is intended for vehicle locations that accept 4\" x 6\" speakers. The pair combines a woofer and centrally mounted tweeter to cover bass, midrange, and high-frequency playback from a single speaker location.\u003c\/p\u003e\u003cp\u003eEach H46 uses a polypropylene woofer cone with a UV-treated foam surround. This combination is designed to support responsive midbass and midrange reproduction while maintaining the cone's movement at the speaker edge. A 1\" PEI tweeter handles the upper frequencies for added detail in vocals, percussion, and instruments.\u003c\/p\u003e\u003cp\u003eThe H46 is rated for 50 watts RMS and 150 watts maximum power handling, with a 4-ohm nominal impedance. Its published frequency response is 83 Hz to 20 kHz, with a sensitivity rating of 83 dB at 1 watt\/1 meter. These specifications make it suited to compatible factory-radio replacement applications or systems using appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the woofer and tweeter, while tweeter protection is included to help safeguard the high-frequency driver. The tweeter uses a neodymium magnet, and the woofer uses a strontium ferrite magnet. Together, these components support the H46's coaxial design without requiring separate external crossover hardware.\u003c\/p\u003e\u003cp\u003eThe H46 is sold as a pair for matching left and right speaker positions. Its 1.73\" mounting depth can be helpful where installation space is limited, but vehicle fitment should still be checked before purchase. For a more complete audio upgrade, these speakers can be paired with a compatible 4-ohm source unit or amplifier and installed in properly sized factory or custom locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Reproduces high frequencies in the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a responsive woofer diaphragm for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between woofer and tweeter with tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H46 uses a responsive polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and powder-coated rigid stamped steel basket. A strontium ferrite woofer magnet and neodymium tweeter magnet are used in the driver assembly. The speakers are supplied as a matched pair and do not include grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4\" x 6\" speaker and compare available space with the 5.71\" x 3.50\" cutout requirement, 1.73\" mounting depth, and 6.10\" x 4.02\" overall dimensions. Use a compatible 4-ohm audio source or amplifier, and follow vehicle-specific wiring and mounting practices. Because fitment hardware and wiring accessories are not specified, installers should verify what their vehicle requires before installation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614360395846,"sku":"CER-H46","price":86.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71kZfYP6ewL.jpg?v=1784366870"},{"product_id":"cerwin-vega-h52-5-25-2-way-coaxial-speaker-set","title":"Cerwin-Vega H52 5.25\" 2-Way Coaxial Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H52 is a pair of 5.25-inch, 2-way coaxial car speakers for replacing worn factory speakers or building a compact full-range system. Each speaker combines a woofer and centrally mounted tweeter to cover bass, midrange, and high-frequency content from one mounting location. It is designed for vehicles with suitable 5.25-inch speaker locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith a 70W RMS and 210W maximum power rating, the H52 is suited to factory-radio upgrades as well as compatible aftermarket amplification. Its 4-ohm nominal impedance is common in mobile-audio systems. The 88Hz-20kHz frequency response emphasizes full-range playback, while deeper bass is typically handled by a separate subwoofer when desired.\u003c\/p\u003e\u003cp\u003eThe H52 uses a polypropylene woofer cone to reproduce midrange and lower-frequency detail. A UV-treated foam surround supports cone movement while helping the speaker withstand the changing conditions found in vehicle interiors. The result is a practical coaxial format for daily driving and straightforward speaker replacement projects.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter, while built-in tweeter protection is intended to help guard against excessive high-frequency stress. This arrangement keeps the installation simpler than a separate-component speaker system.\u003c\/p\u003e\u003cp\u003eA strontium ferrite woofer magnet and powder-coated stamped-steel basket provide the speaker's motor and mounting structure. The 1.77-inch mounting depth can be useful where door or rear-deck space is limited, but vehicle-specific clearance should always be checked before installation. Mesh grilles are included for installations where the speakers are exposed rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in a compact, single-speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports use with compatible factory radios or aftermarket amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Handles high-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Helps divide frequencies between drivers and protect the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Grilles Included:\u003c\/strong\u003e Adds protection for custom or exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H52 uses a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and a powder-coated rigid stamped-steel basket. Its coaxial layout places the PEI tweeter within the woofer assembly, reducing the number of separate components needed for a conventional speaker upgrade. The speakers are sold as a pair and include mesh grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the intended location accepts a 5.25-inch speaker and check the 4.45-inch cutout diameter, 5.08-inch overall diameter, and 1.77-inch mounting depth before ordering. Mount the speaker securely to a flat, sealed baffle surface, keep wiring protected from sharp metal edges, and observe speaker polarity. The H52 can be used in door or rear-deck locations where the vehicle provides sufficient clearance.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614361083974,"sku":"CER-H52","price":114.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71DvSPDxeAL.jpg?v=1784366908"},{"product_id":"cerwin-vega-h652-6-5-2-way-coaxial-speakers","title":"Cerwin-Vega H652 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H652 is a pair of 6.5-inch, 2-way coaxial full-range car speakers designed for replacing compatible factory speakers or building a straightforward speaker upgrade. Each speaker combines a woofer and tweeter in one assembly, helping deliver a broad frequency range from a standard-size mounting location. The pair is rated for 90 watts RMS and 270 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eThis HED Series model is intended for listeners who want clearer full-range sound from a 6.5-inch speaker position without moving to a separate component-speaker setup. Its 4-ohm nominal impedance is suited to common car-audio speaker systems that support 4-ohm loads. Confirm your vehicle's opening, mounting depth, and wiring arrangement before installation.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles bass and midrange duties, while the 1-inch PEI tweeter reproduces higher frequencies. The tweeter uses a neodymium magnet and a dynamically balanced design. Together, the coaxial layout provides a compact full-range solution for front or rear speaker locations where fitment permits.\u003c\/p\u003e\u003cp\u003eThe H652 uses an integrated crossover with tweeter protection to manage the handoff between the woofer and tweeter. This design supports smoother frequency transitions while helping protect the tweeter during higher-volume operation. The speaker's specified frequency response is 89 Hz to 20 kHz, with an 88 dB sensitivity rating at 1W\/1M.\u003c\/p\u003e\u003cp\u003eFor a complete vehicle system, the H652 can be used as a compatible replacement pair or combined with additional speakers and appropriate amplification. Its 1.77-inch mounting depth can be useful where door or rear-deck clearance is limited, but vehicle fitment should always be measured. Mesh grilles are included for installations where the speakers are exposed rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 1-inch tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Power Handling:\u003c\/strong\u003e Supports systems matched to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Handles bass and midrange reproduction in a durable cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Provides the woofer with a durable, compliant outer suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter and includes tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Uses a rigid, powder-coated steel frame to support the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H652 uses a polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and strontium ferrite woofer magnet. Its basket is a powder-coated, rigid stamped-steel design. The speakers include mesh grilles and are sold as a pair.\u003c\/p\u003e\u003cp\u003eVerify a 4.88-inch cutout, 1.77-inch mounting-depth clearance, and 6.26-inch overall-diameter clearance at the intended location before purchase. Wire each speaker with correct polarity to a compatible 4-ohm car-audio channel. Use the included mesh grilles when the installation does not retain a suitable factory grille or panel.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614361935942,"sku":"CER-H652","price":121.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/710ZSqpN0iL.jpg?v=1784366950"},{"product_id":"cerwin-vega-h653-6-5-3-way-coaxial-speakers","title":"Cerwin-Vega H653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H653 is a pair of 6.5-inch, 3-way coaxial car speakers designed as a direct full-range upgrade from many factory door or rear-deck speakers. Each speaker combines a woofer, dedicated midrange driver, and tweeter in one assembly. This format helps add more complete sound coverage without requiring separate component crossovers.\u003c\/p\u003e\u003cp\u003eThe H653 uses a 6.5-inch polypropylene woofer for the lower frequencies, a 2.5-inch midrange for vocal and instrumental detail, and a 1-inch PEI balanced-dome tweeter for upper-frequency reproduction. Its published frequency response is 89 Hz to 20 kHz. With a 4-ohm nominal impedance, it is intended for conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003ePower handling is rated at 90 watts RMS and 270 watts peak per speaker. The pair is rated for 180 watts RMS and 540 watts peak combined. Its 88 dB sensitivity rating and integrated crossover make it suitable for use with a compatible factory radio or an external amplifier matched appropriately to the speakers.\u003c\/p\u003e\u003cp\u003eDurability-focused construction includes polypropylene cones, UV-treated foam surrounds, ferrite woofer magnets, and powder-coated stamped-steel baskets. The coaxial layout keeps the midrange and tweeter integrated with the woofer, simplifying installation where space is limited. Built-in tweeter protection is included as part of the internal crossover network.\u003c\/p\u003e\u003cp\u003eThe H653 is suited to listeners replacing worn factory speakers or building a straightforward full-range system in compatible factory locations. It can be used in door or rear-deck positions when the mounting dimensions and available depth are confirmed. For systems seeking deeper low bass, these speakers can be paired with a separate subwoofer and properly configured amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports 90 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Midrange Driver:\u003c\/strong\u003e Handles important midrange information between bass and treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail with a neodymium magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover Protection:\u003c\/strong\u003e Includes tweeter protection without an external crossover box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H653 uses a powder-coated, rigid stamped-steel basket with a ferrite woofer magnet, polypropylene cone, and UV-treated foam surround. Its 1-inch PEI tweeter and 2.5-inch midrange are mounted concentrically with the 6.5-inch woofer. The manufacturer specification sheet also lists grilles for this model.\u003c\/p\u003e\u003cp\u003eConfirm both the 4.88-inch cutout requirement and 1.77-inch mounting-depth requirement before installation, as factory 6.5-inch locations can vary by vehicle. Wire each speaker with correct polarity and use a compatible 4-ohm speaker channel. The integrated crossover simplifies hookup, but vehicle-specific mounting adapters, harnesses, or hardware may still be required depending on the installation location.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614362394694,"sku":"CER-H653","price":194.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71XYe0aitoL.jpg?v=1784366996"}],"url":"https:\/\/audiowatt.store\/collections\/speakers.oembed?page=5","provider":"Audio Watt Store","version":"1.0","type":"link"}