{"title":"Ribbon Microphones","description":null,"products":[{"product_id":"se-electronics-rnr1-active-ribbon-microphone","title":"sE Electronics RNR1 Active Ribbon Microphone","description":"\u003cp\u003eThe sE Electronics RNR1 is an active ribbon microphone designed for detailed professional recording. It combines the natural tonal character associated with ribbon microphones with active electronics that support a broad, usable frequency range. It is suited to studios and recording setups that need a figure-8 microphone for vocals, instruments, room capture, and ensemble work.\u003c\/p\u003e\u003cp\u003eThe RNR1 uses a hand-tensioned 2.5 µm aluminum ribbon and a figure-8 pickup pattern. This pattern captures sound from the front and rear of the microphone while reducing pickup from the sides. It can be useful for close-miking selected sources, stereo techniques, and room or ambient recording applications.\u003c\/p\u003e\u003cp\u003eIts active internal electronics require standard 48V phantom power and are designed around discrete Class-A circuitry. Two custom Rupert Neve-designed transformers are incorporated into the signal path. This architecture supports the microphone's sensitivity and helps retain detail across its specified frequency range.\u003c\/p\u003e\u003cp\u003eA switchable 100 Hz low-cut filter provides a practical way to reduce low-frequency rumble, footfall noise, and excessive proximity effect when needed. The RNR1 is specified for use on vocals, acoustic guitar, electric guitar cabinets, piano, strings, woodwinds, brass, drum kits, cymbals, and room sources. Its 137 dB maximum SPL rating also supports placement near louder sound sources when appropriate technique is used.\u003c\/p\u003e\u003cp\u003eThe microphone includes a custom shockmount to help isolate it from stand-borne vibration and mechanical noise. A wooden box, metal case, thread adapter, and user manual are also included for storage, transport, and setup. Pair it with a balanced XLR cable and a preamp or audio interface that provides compliant 48V phantom power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Ribbon Design:\u003c\/strong\u003e Uses active electronics to operate from 48V phantom power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 µm Aluminum Ribbon:\u003c\/strong\u003e Hand-tensioned ribbon element captures detailed source information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure-8 Pattern:\u003c\/strong\u003e Picks up front and rear sources while reducing side pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Custom Transformers:\u003c\/strong\u003e Includes two Rupert Neve-designed transformers in the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 Hz Low-Cut Filter:\u003c\/strong\u003e Helps reduce rumble, footfall noise, and proximity buildup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Shockmount Included:\u003c\/strong\u003e Helps minimize vibration transferred through the microphone stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RNR1 has a precision-machined chassis with distinctive scalloped edges around the ribbon assembly. Its hand-crafted ribbon is paired with neodymium magnets, active discrete electronics, and gold-plated XLR connector contacts. The microphone measures 47 mm in diameter and 268 mm long, with a weight of 860 g.\u003c\/p\u003e\u003cp\u003eMount the RNR1 in its included shockmount on a stable microphone stand, then connect it with a balanced 3-pin XLR cable. Enable 48V phantom power from a compatible preamp, console, or audio interface before use, and use the 100 Hz low-cut switch when low-frequency rumble or proximity effect needs control. Position the front or rear lobe toward the desired source and keep the side nulls aimed toward unwanted sound where practical.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669438586950,"sku":"RNR1","price":1599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71DmtTbwZ0L.jpg?v=1784503388"},{"product_id":"se-electronics-vr1-passive-ribbon-microphone","title":"sE Electronics VR1 Passive Ribbon Microphone","description":"\u003cp\u003eThe sE Electronics VR1 is a passive ribbon microphone built for recording instruments and voices with the natural character associated with ribbon designs. It is especially suited to close-miking electric guitar cabinets where conventional ribbon microphones can sometimes sound overly dark. Its slim profile also makes it practical in tight studio and stage-miking positions.\u003c\/p\u003e\u003cp\u003eDesigned for guitar amps, drum overheads, acoustic guitar, piano, brass, woodwinds, strings, room recording, and vocals, the VR1 covers a wide range of sources. Its figure-8 pickup pattern captures sound from the front and rear while rejecting sound from the sides. This makes placement and room acoustics important parts of getting the desired result.\u003c\/p\u003e\u003cp\u003eThe VR1 provides a 20 Hz to 18 kHz frequency range, extending further into high frequencies than many traditional passive ribbon designs. Its sound is intended to retain ribbon smoothness while preserving useful detail and edge from dynamic sources. With a maximum SPL rating of 135 dB, it is specified for demanding sources such as guitar cabinets and drums.\u003c\/p\u003e\u003cp\u003eAt its core is a hand-crafted, hand-tensioned 2.5 µm aluminum ribbon paired with a neodymium magnet. sE Electronics uses a mechanical design intended to deliver extended frequency response without active electronics. The result is a passive microphone with 300-ohm impedance and a recommended load impedance above 1 kOhm.\u003c\/p\u003e\u003cp\u003eThe VR1 connects through a standard 3-pin male XLR output and does not require phantom power to operate. It is phantom-protected, which helps accommodate setups where +48 V cannot be switched off. A shock mount, stand clip, thread adapter, and wooden storage case are included to support placement and transport.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Ribbon Design:\u003c\/strong\u003e Delivers ribbon microphone character without requiring operating power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Frequency Range:\u003c\/strong\u003e Covers 20 Hz to 18 kHz for detailed instrument capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Tensioned Aluminum Ribbon:\u003c\/strong\u003e Uses a 2.5 µm ribbon made for consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure-8 Polar Pattern:\u003c\/strong\u003e Captures front and rear sound while rejecting side sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL Handling:\u003c\/strong\u003e Rated up to 135 dB for loud musical sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Custom Shock Mount:\u003c\/strong\u003e Supports centered, reversed, flat, or angled microphone positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VR1 uses an all-metal housing with a flat, rounded-edge chassis, gold-plated XLR connector, and neodymium magnet assembly. Measuring only 19.5 mm (0.77 in.) thick, it can sit close to a cabinet grille, drum head, or other confined recording position. The microphone weighs 230 g and includes protective storage accessories.\u003c\/p\u003e\u003cp\u003eConnect the VR1 to a microphone preamp or audio interface using a balanced 3-pin XLR microphone cable, with an input load above 1 kOhm recommended. Phantom power is not needed for operation, although the microphone is phantom-protected when +48 V is present. Use the included shock mount when flexible angle adjustment or vibration isolation is useful, and position the front or rear lobe of its figure-8 pattern toward the desired source.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669485969478,"sku":"VR1","price":409.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81-rXflkdqL.jpg?v=1784507948"},{"product_id":"se-electronics-vr2-active-ribbon-microphone","title":"sE Electronics VR2 Active Ribbon Microphone","description":"\u003cp\u003eThe sE Electronics VR2 is an active ribbon microphone built for recording sources that benefit from the natural character of a ribbon design while retaining useful high-frequency detail. It is suited to studio and live-recording applications including vocals, acoustic guitar, electric guitar cabinets, drums, piano, strings, brass, and woodwinds. Its active electronics provide a practical option for engineers working with interfaces, mixers, and preamps that supply 48V phantom power.\u003c\/p\u003e\u003cp\u003eThe VR2 uses a figure-8 pickup pattern, capturing sound from the front and rear while rejecting sound arriving at its sides. This makes it useful when room contribution, source placement, and off-axis rejection are important parts of the recording setup. The 20 Hz to 18 kHz frequency range supports close-miked instruments as well as more open room, overhead, and ensemble applications.\u003c\/p\u003e\u003cp\u003eA hand-crafted, hand-tensioned 2.5-micron aluminum ribbon is paired with a neodymium magnet structure and active circuitry. This combination is designed to provide the smooth, detailed response associated with ribbon microphones while supplying a usable output for longer cable runs and lower-output sources. The VR2 is rated for sound-pressure levels up to 135 dB at 0.5% THD measured at 1 kHz.\u003c\/p\u003e\u003cp\u003eThe slim, flat chassis helps the VR2 fit where conventional side-address microphones can be difficult to position. It can be placed close to a guitar cabinet, drum head, or inside a kick drum when used with its included custom shockmount. The shockmount allows centered, reversed, flat, or angled microphone positioning for flexible placement around instruments and amplifiers.\u003c\/p\u003e\u003cp\u003eFor a complete recording chain, pair the VR2 with a balanced XLR input that provides standard 48V phantom power. Its 200-ohm electrical impedance and recommended load impedance above 1 kilohm support use with compatible microphone preamps, mixers, and audio interfaces. A wooden case, stand clip, thread adapter, and shockmount are included to support storage and mounting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Ribbon Electronics:\u003c\/strong\u003e Uses 48V phantom power for an active ribbon microphone signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand-Tensioned Aluminum Ribbon:\u003c\/strong\u003e Features a 2.5-micron aluminum ribbon assembled by hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure-8 Polar Pattern:\u003c\/strong\u003e Captures front and rear sound while rejecting sound at the sides.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 Hz–18 kHz Response:\u003c\/strong\u003e Covers low-frequency body and extended upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Flat Chassis:\u003c\/strong\u003e Fits close to cabinets, drums, and other tight recording positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom Shockmount Included:\u003c\/strong\u003e Supports centered, reversed, flat, or angled microphone placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VR2 has an all-metal housing, a flat round-edged chassis, and a gold-plated 3-pin XLR connector. Its microphone body measures 33 mm long, 20 mm wide, and 187 mm high, with a weight of 360 g. The compact profile is less than 3\/4 inch thick for placement in confined setups.\u003c\/p\u003e\u003cp\u003eConnect the VR2 to a compatible balanced XLR microphone input that supplies 48V phantom power according to IEC 61938. sE Electronics specifies a balanced cable with studio-grade connectors and a load impedance greater than 1 kilohm. Use the included shockmount, stand clip, and thread adapter to position the microphone for vocals, instruments, guitar cabinets, drum kits, or room recording.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669490196550,"sku":"VR2","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71DJmykgazL.jpg?v=1784508019"},{"product_id":"se-electronics-x1-r-passive-ribbon-microphone","title":"sE Electronics X1 R Passive Ribbon Microphone","description":"\u003cp\u003eThe sE Electronics X1 R is a passive ribbon microphone designed for studio recording, broadcast, voice-over, and instrument capture. It brings the naturally smooth character associated with ribbon microphones to applications where a durable, versatile microphone is needed. Its figure-8 pickup pattern captures sound from the front and rear while reducing pickup from the sides.\u003c\/p\u003e\u003cp\u003eThis microphone is a practical option for recording guitar cabinets, drum overheads, brass, woodwinds, strings, piano, acoustic guitar, and vocals. Its 135 dB maximum SPL rating supports close placement on loud sources when appropriate. The passive design connects through a standard 3-pin XLR microphone connection and does not require phantom power for operation.\u003c\/p\u003e\u003cp\u003eThe X1 R uses a hand-crafted 2.5 µm aluminum ribbon element positioned between neodymium magnets. sE Electronics combines traditional ribbon construction with mechanical elements derived from its VR1 and VR2 high-frequency extension technology. This design gives the microphone a classic ribbon-style response with a gentle lift in the upper frequencies.\u003c\/p\u003e\u003cp\u003eWith a 20 Hz to 16 kHz frequency range and 1.8 mV\/Pa sensitivity, the X1 R is suited to recording chains with a capable microphone preamp. Its 200-ohm electrical impedance and passive electronics make it a straightforward addition to an XLR-equipped interface, mixer, or standalone preamp. The microphone is phantom-protected, although phantom power is not required.\u003c\/p\u003e\u003cp\u003eThe X1 R fits well into a microphone collection as a contrasting option to dynamic and condenser models. Use it alone for smooth instrument capture, or pair it with another microphone when recording a guitar cabinet, drum kit, or room sound. A swivel mic clip and stand-thread adapter are included for basic placement on a microphone stand.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Ribbon Design:\u003c\/strong\u003e Delivers the smooth, natural character associated with ribbon microphones without requiring external powering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5 µm Aluminum Ribbon:\u003c\/strong\u003e Uses a hand-crafted aluminum ribbon element for detailed sound capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFigure-8 Pattern:\u003c\/strong\u003e Captures sound from the front and rear while reducing side pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL Handling:\u003c\/strong\u003e Handles up to 135 dB SPL for loud instruments and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended HF Technology:\u003c\/strong\u003e Incorporates VR1 and VR2 design elements for a gentle high-frequency lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged Metal Housing:\u003c\/strong\u003e Provides durable physical construction and helps reject electrical interference.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X1 R has an all-metal housing, a hand-crafted ribbon element, neodymium magnets, and a gold-plated XLR connector. Its 510 g microphone weight gives it a substantial feel for stand-mounted studio or location use. The durable construction is intended for regular recording use, including high-volume sources.\u003c\/p\u003e\u003cp\u003eMount the microphone with the included swivel mic clip and mic stand-thread adapter, then connect its 3-pin male XLR output to a compatible microphone input. Position the front or rear lobe toward the intended source, keeping the sides oriented toward sounds you want reduced. It does not require phantom power, though the microphone is phantom-protected.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669492916294,"sku":"X1 R","price":246.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81n2QdY8sXL.jpg?v=1784508374"}],"url":"https:\/\/audiowatt.store\/collections\/ribbon-microphones.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}