{"title":"Pro Audio Cables","description":null,"products":[{"product_id":"mogami-gold-3-5-2rca-06-3-5mm-trs-to-dual-rca-cable","title":"Mogami GOLD 3.5-2RCA-06 3.5mm TRS to Dual RCA Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 RCA 06 is a 6-foot stereo breakout cable with one 3.5mm TRS male plug on one end and two RCA male plugs on the other. It is designed to route left\/right analog audio from a device with a 3.5mm stereo output to equipment with stereo RCA inputs. This format is useful for connecting portable players, computers, media devices, and other compatible sources to an amplifier, receiver, mixer, or powered audio system.\u003c\/p\u003e\u003cp\u003eThe cable carries a stereo analog signal, with the dual RCA connectors separating the left and right channels at the destination. Its 6-foot length provides practical reach for nearby components while keeping cable routing manageable. It is intended for line-level stereo connections rather than speaker-level wiring.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with its 2930 two-channel snake cable, using 26 AWG conductors and a shielded construction. XLPE insulation, a drain wire, and a served spiral shield are part of the underlying cable design. These construction details support tidy, durable analog audio routing in systems where cable handling and electrical noise control matter.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used on the connectors, and the cable uses straight connectors at both ends. The 3.5mm TRS plug is male, while each RCA connector is also male. This makes the cable a direct connection solution when the source has a 3.5mm stereo output and the receiving equipment has open left\/right RCA inputs.\u003c\/p\u003e\u003cp\u003eFor vehicle, home, studio, DJ, or portable-audio integration, this cable can bridge compatible stereo outputs and RCA inputs without combining channels. It is a useful option when adding an external source to a system with analog RCA connectivity. As with any analog connection, the source and destination should be powered down or volume reduced before connecting equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm-to-RCA Stereo Breakout:\u003c\/strong\u003e Connects one 3.5mm TRS stereo output to separate left and right RCA inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Cable Length:\u003c\/strong\u003e Provides 6 feet of reach for nearby source components and audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2930 Snake Cable:\u003c\/strong\u003e Uses Mogami 2930 two-channel snake cable as the cable platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielded 26 AWG Construction:\u003c\/strong\u003e Uses shielded 26 AWG conductors for analog audio signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold-plated connector contacts support repeated connection and disconnection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Male Connectors:\u003c\/strong\u003e Features a straight 3.5mm TRS male plug and two straight RCA male plugs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 RCA 06 uses a black flexible PVC outer jacket over Mogami 2930 cable construction. Its underlying cable design includes XLPE insulation, a drain wire, and a served spiral shield. The assembly is terminated with gold-plated contacts and straight male connectors on both ends.\u003c\/p\u003e\u003cp\u003eConnect the 3.5mm TRS male plug to a compatible stereo line or headphone output, then connect the two RCA male plugs to matching left and right RCA inputs. Confirm that the receiving equipment has RCA inputs rather than outputs, and observe left\/right channel markings where provided. Devices without a 3.5mm output or systems without RCA inputs require appropriate separate adapters or conversion hardware.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599285248070,"sku":"GOLD 3.5 2 RCA 06","price":101.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/718uJOsrqEL.jpg?v=1784263759"},{"product_id":"mogami-gold-3-5-2-rca-20-3-5mm-trs-to-dual-rca-cable","title":"Mogami GOLD 3.5 2 RCA 20 3.5mm TRS To Dual RCA Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 RCA 20 is a 20-foot stereo breakout cable with one 3.5mm TRS male plug on one end and dual RCA male plugs on the other. It provides a direct way to connect a device with a stereo 3.5mm output to an audio component with left\/right RCA inputs. This makes it useful for linking portable players, computers, media devices, mixers, amplifiers, powered speakers, and compatible car-audio auxiliary inputs.\u003c\/p\u003e\u003cp\u003eThis cable is intended for listeners, DJs, musicians, and installers who need a long analog stereo connection without using separate adapters. The 3.5mm TRS plug carries stereo left and right audio, while the two RCA plugs route those channels individually to a stereo input. Its 20-foot length supports systems where the source and destination are positioned farther apart.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2930 two-channel snake cable, using individually twisted and shielded conductor pairs. The construction includes XLPE insulation, drain wires, and served spiral bare-copper shielding. These features are designed to help control unwanted interference in audio installations.\u003c\/p\u003e\u003cp\u003eGold-plated connector contacts support reliable repeated connections, while the flexible PVC outer jacket is made for regular handling. The cable uses a 26 AWG conductor construction and remains shielded from end to end. Its black finish keeps the installation visually discreet in home, studio, live-sound, and vehicle applications.\u003c\/p\u003e\u003cp\u003eFor a car-audio upgrade, the GOLD 3.5 2 RCA 20 can be used where a 3.5mm stereo source needs to feed an RCA-equipped auxiliary input, amplifier, processor, or mixer. It is a passive analog cable and does not add Bluetooth, USB audio, charging, or digital-audio conversion. Confirm that the equipment being connected uses compatible male\/female 3.5mm TRS and RCA connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm TRS to Dual RCA:\u003c\/strong\u003e Splits one stereo mini-jack output into separate left and right RCA channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides extra reach for remote sources, equipment racks, and vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2930 Cable Construction:\u003c\/strong\u003e Uses Mogami two-channel snake cable with individually twisted shielded pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shielding:\u003c\/strong\u003e Helps reduce susceptibility to radio-frequency and electrical interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Supports dependable signal contact through repeated plugging and unplugging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PVC Jacket:\u003c\/strong\u003e Provides a durable, manageable outer covering for routing and everyday use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines a black flexible PVC outer jacket with individually shielded internal channels. Each channel uses a drain wire and served spiral bare-copper shield, and the conductors use XLPE insulation. The assembly has gold-plated contacts and straight 3.5mm TRS and RCA male connectors.\u003c\/p\u003e\u003cp\u003eConnect the 3.5mm TRS male plug to a compatible stereo output, then connect the RCA plugs to the matching left and right RCA input channels on the destination equipment. Route the cable away from power wiring and moving parts when possible, and avoid sharply bending or pinching it during installation. This cable is for stereo analog audio connections and requires compatible female ports at both ends.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599285477446,"sku":"GOLD 3.5 2 RCA 20","price":137.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pMPX7CkcL.jpg?v=1784263782"},{"product_id":"mogami-gold-3-5-2-ts-15-3-5mm-to-dual-1-4-ts-cable","title":"Mogami GOLD 3.5 2 TS 15 3.5mm To Dual 1\/4\" TS Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 TS 15 is a 15-foot stereo Y-adapter cable that connects one 3.5mm TRS stereo connection with two 1\/4-inch TS mono connections. It is intended for line-level stereo audio routing between portable, desktop, studio, and live-sound equipment. The split 1\/4-inch ends carry the left and right channels separately.\u003c\/p\u003e\u003cp\u003eThis cable is useful when a laptop, phone, tablet, portable recorder, or audio interface has a 3.5mm stereo jack but the receiving equipment uses separate 1\/4-inch unbalanced inputs. It can connect a stereo source to two mixer channels, a PA system, or other left\/right line inputs. It may also be used in the opposite direction when compatible line-level connections are required.\u003c\/p\u003e\u003cp\u003eThe GOLD 3.5 2 TS 15 is designed for users who need a longer stereo breakout cable without adding separate adapters and patch cables. Its 15-foot overall length provides reach for studio desks, DJ setups, rehearsal spaces, and equipment racks. An 18-inch fan-out at the dual 1\/4-inch end helps route the left and right plugs to adjacent or spaced input jacks.\u003c\/p\u003e\u003cp\u003eMogami builds this model with W2930 multicore microphone snake cable, using two individually shielded conductors. The cable construction includes XLPE insulation, a drain wire, and spiral bare-copper shielding to help limit interference in electrically busy environments. Gold-plated contact surfaces are used on the connectors.\u003c\/p\u003e\u003cp\u003eAs an unbalanced stereo breakout cable, this model is a practical link between consumer-style 3.5mm stereo audio and professional-style dual 1\/4-inch TS connections. It is not a balanced TRS-to-TRS cable and does not convert an unbalanced signal to balanced operation. For systems with compatible line-level jacks, it provides a direct left\/right connection path with no external converter required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo Y-Adapter Format:\u003c\/strong\u003e Splits one 3.5mm stereo connection into separate left and right 1\/4-inch TS connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Foot Overall Length:\u003c\/strong\u003e Provides added reach for studio, DJ, desktop, and live-sound setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Inch Fan-Out:\u003c\/strong\u003e Gives the dual 1\/4-inch plugs room to reach separate input jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2930 Cable Construction:\u003c\/strong\u003e Uses Mogami multicore microphone snake cable for the main cable assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Conductors:\u003c\/strong\u003e Helps reduce unwanted noise pickup between the two audio channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides durable contact surfaces for repeated connections and disconnects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses a black flexible PVC jacket with gold-plated connector contacts and straight connectors at both ends. Its two-channel construction uses 26 AWG conductors with individual shielding, a drain wire, and spiral bare-copper shielding. The 3.5mm TRS plug and both 1\/4-inch TS plugs are male connectors.\u003c\/p\u003e\u003cp\u003eConnect the 3.5mm TRS end to a compatible stereo line or headphone output, then connect the two 1\/4-inch TS plugs to the left and right unbalanced inputs of a mixer, amplifier, PA, recorder, or interface. For reverse use, connect the two 1\/4-inch TS outputs to a compatible stereo 3.5mm input. Confirm that connected equipment is set up for line-level operation where applicable, and use the 18-inch fan-out to keep the left and right channels organized.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599285870662,"sku":"GOLD 3.5 2 TS 15","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71eE12ksxKL.jpg?v=1784263799"},{"product_id":"mogami-gold-3-5-2-xlrf-03-dual-xlrf-to-3-5mm-cable","title":"Mogami GOLD 3.5 2 XLRF 03 Dual XLRF to 3.5mm Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 03 is a 3-foot stereo Y-adapter cable that connects left and right XLR line-level outputs to a single 3.5mm stereo input. It is designed for setups where a mixer, preamp, or audio interface needs to feed a portable recorder, computer, or other device with a 1\/8-inch stereo input. The cable terminates in two XLR female connectors and one 3.5mm TRS male plug.\u003c\/p\u003e\u003cp\u003eThis cable is suited to studio, broadcast, livestream, and location-recording systems that need a compact analog stereo connection. Its dual XLR female ends connect to the source equipment's XLR male outputs, while the 3.5mm plug connects to the destination input. The Y configuration keeps the left and right channels organized in one cable run.\u003c\/p\u003e\u003cp\u003eMogami builds this adapter with multicore microphone snake cable for flexible handling in portable and installed audio systems. Gold-contact connectors are used at both ends, and the connectors are straight for conventional routing through equipment racks, desks, and recorder bags. The 3-foot overall length is useful when connected equipment is positioned nearby.\u003c\/p\u003e\u003cp\u003eThe cable provides a practical interface between professional XLR-based line-level gear and devices using a 3.5mm stereo input. Because the destination connection is a stereo 3.5mm TRS plug, it combines separate left and right channels into one miniature stereo connection. Confirm that the destination has a 3.5mm stereo input and that the source provides dual XLR line-level outputs.\u003c\/p\u003e\u003cp\u003eGOLD 3.5-2XLRF cables are directional by connector type and are not intended to be reversed. The XLR female connectors are intended for the source side, while the 3.5mm TRS male plug goes to the destination input. For the opposite connection direction—from a 3.5mm stereo output to dual XLR inputs—the corresponding dual-XLR-male version is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR Female Ends:\u003c\/strong\u003e Connects to left and right XLR male source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm Stereo TRS Plug:\u003c\/strong\u003e Feeds a single 1\/8-inch stereo input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Foot Length:\u003c\/strong\u003e Suits close-range recorder, interface, and mixer connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticore Snake Cable:\u003c\/strong\u003e Provides flexible cable handling for audio setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Uses gold-contact terminations at both cable ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Bodies:\u003c\/strong\u003e Supports standard routing and conventional equipment placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis black Y-adapter uses Mogami multicore microphone snake cable and straight connectors at both ends. The assembly separates into two XLR female connectors at the fan-out and terminates in one 3.5mm TRS male plug. Gold-contact connectors are specified for the cable.\u003c\/p\u003e\u003cp\u003eConnect the two XLR female ends to the left and right XLR male line outputs of the source device, then insert the 3.5mm TRS plug into a compatible stereo input. Keep the 18-inch fan-out accessible so the XLR connectors can reach the source outputs without strain. This cable is intended for line-level stereo routing and is not the reverse-direction adapter for feeding dual XLR inputs from a 3.5mm output.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286034502,"sku":"GOLD 3.5 2 XLRF 03","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL.jpg?v=1784263824"},{"product_id":"mogami-gold-3-5-2-xlrf-06-dual-xlrf-y-adapter-cable","title":"Mogami GOLD 3.5 2 XLRF 06 Dual XLRF Y-Adapter Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 06 is a 6-foot stereo breakout cable with one 3.5mm TRS male plug and two XLR female connectors. It is designed for routing a stereo line-level signal from left and right XLR outputs to a device equipped with a 3.5mm stereo input. This configuration can simplify connections between mixers, preamps, audio interfaces, and recorders or computers with a miniature stereo input.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio, live-sound, streaming, recording, and portable-production systems where compatible connectors are already present. Its dual XLR female ends connect to corresponding XLR male output connectors, while the 3.5mm TRS plug connects to the destination's stereo input. The left and right XLR legs provide a practical way to combine a two-channel source into one stereo mini-jack connection.\u003c\/p\u003e\u003cp\u003eMogami builds this GOLD-series Y-adapter with multicore microphone snake cable for flexible handling in professional audio environments. The cable uses gold-contact connectors and straight connector housings at both ends. Its 18-inch fan-out gives the two XLR female connectors useful separation when connecting adjacent output channels.\u003c\/p\u003e\u003cp\u003eThe 3.5mm TRS end carries an unbalanced stereo connection, so this cable should not be treated as a fully balanced end-to-end signal path. It is best used with compatible line-level equipment and appropriately configured input and output levels. For applications requiring a 3.5mm output to feed dual XLR inputs, Mogami offers the separate 3.5-2XLRM configuration with XLR male connectors.\u003c\/p\u003e\u003cp\u003eAt 6 feet overall, the GOLD 3.5 2 XLRF 06 fits compact desktop rigs, portable recording kits, and nearby rack or mixer connections. It can replace multi-adapter setups with one purpose-built stereo cable. The included Mogami limited lifetime warranty supports long-term use by the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo XLR-to-3.5mm Breakout:\u003c\/strong\u003e Connects dual XLR female ends to one 3.5mm TRS male plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Overall Length:\u003c\/strong\u003e Provides reach for close-range studio and production connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Inch XLR Fan-Out:\u003c\/strong\u003e Separates the left and right XLR connectors for easier routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Uses gold-contact terminations for durable connection points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticore Cable Construction:\u003c\/strong\u003e Uses Mogami multicore microphone snake cable for flexible handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Design:\u003c\/strong\u003e Keeps both the TRS plug and XLR connectors straight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 XLRF 06 uses a black, flexible multicore cable with a Y-split construction. It has a straight 3.5mm TRS male connector on one end and two straight 3-pin XLR female connectors on the other. Gold contacts and the 18-inch fan-out are part of the cable's purpose-built audio-interconnect design.\u003c\/p\u003e\u003cp\u003eConnect the XLR female connectors to compatible left and right XLR male outputs, then connect the 3.5mm TRS plug to a compatible stereo line input. Verify that the destination accepts a 3.5mm stereo input and set connected devices for suitable line-level operation. This model is directional by connector gender; use the separate 3.5-2XLRM version when a 3.5mm source must feed dual XLR female inputs.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286198342,"sku":"GOLD 3.5 2 XLRF 06","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL_6bd3d50e-bef2-4b60-a757-381f923d727d.jpg?v=1784263840"},{"product_id":"mogami-gold-3-5-2-xlrf-20-dual-xlrf-to-3-5mm-cable","title":"Mogami GOLD 3.5 2 XLRF 20 Dual-XLRF to 3.5mm Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 20 is a 20-foot stereo breakout cable with one 3.5mm TRS male plug and two 3-pin XLR female connectors. It is designed to route separate left and right audio channels from XLR-equipped source outputs to a device with a 3.5mm stereo line input. This configuration is useful for connecting mixers, preamps, audio interfaces, or other dual-XLR-output equipment to compatible recorders and computer audio inputs.\u003c\/p\u003e\u003cp\u003eThe dual XLR female ends connect to XLR male outputs, while the 3.5mm TRS plug connects to the destination's stereo mini input. Although it uses XLR connectors at the source end, the stereo 3.5mm TRS termination means the complete connection is not balanced end-to-end. This is a directional adapter cable and is not intended as the reverse of a 3.5mm output-to-dual-XLR-input cable.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2930 two-channel multicore microphone snake cable. The cable construction uses individually shielded pairs, helping keep the left and right channels organized within one flexible outer jacket. Its two-channel design makes it well suited to stereo line-level routing where a single cable run is preferred over two separate cables.\u003c\/p\u003e\u003cp\u003eGold-contact connectors and straight connector bodies support reliable repeated connections in studio, mobile-recording, DJ, and installed audio setups. The 20-foot overall length provides extra reach for equipment racks, workstations, recording spaces, and stage-side connections. An approximately 18-inch fan-out separates the two XLR female connectors for access to adjacent or spaced output jacks.\u003c\/p\u003e\u003cp\u003eThis cable is a practical fit when the source provides left and right audio on separate XLR male outputs and the receiving device accepts a 3.5mm stereo line input. It does not convert microphone-level signals, provide gain control, or change connector gender at the XLR source end. For the opposite signal direction, a cable with dual XLR male connectors is required instead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo XLR Breakout:\u003c\/strong\u003e Routes separate left and right channels to one 3.5mm TRS input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Cable Length:\u003c\/strong\u003e Provides reach for studio and recording-system connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR Female Ends:\u003c\/strong\u003e Connect to XLR male source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2930 Snake Cable:\u003c\/strong\u003e Uses two individually shielded audio channels in one jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Supports dependable contact surfaces for repeated connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Design:\u003c\/strong\u003e Suits conventional equipment-panel and recorder connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 XLRF 20 uses Mogami W2930 two-channel multicore cable with flexible PVC construction, XLPE insulation, drain wires, and served spiral shielding for each channel. The main cable section has a two-channel snake layout, while the XLR ends are split into a fan-out. Straight connectors at both ends keep the cable suitable for standard front-, side-, and rear-panel connections.\u003c\/p\u003e\u003cp\u003eConnect the two XLR female connectors to the corresponding left and right XLR male line outputs of the source device, then connect the 3.5mm TRS plug to a compatible stereo line input. Confirm that the receiving 3.5mm jack accepts stereo line-level audio and set levels at the source or destination as needed. Do not use this cable where dual XLR male connectors are required at the destination, and do not treat the complete connection as balanced.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286493254,"sku":"GOLD 3.5 2 XLRF 20","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL_2f71a582-b92e-481b-9ade-994af63be68b.jpg?v=1784263862"},{"product_id":"mogami-gold-3-5-3-5-03-3-5mm-stereo-patch-cable","title":"Mogami GOLD 3.5 3.5 03 3.5mm Stereo Patch Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 3.5 03 is a 3-foot stereo audio patch cable with 3.5mm TRS male plugs on both ends. It provides a direct analog connection between compatible devices with 3.5mm stereo input and output jacks. The short length is well suited to tidy desktop, portable, and component-audio connections.\u003c\/p\u003e\u003cp\u003eThis cable is intended for listeners and system builders who need a dependable 3.5mm-to-3.5mm stereo link. It can connect sources such as phones, tablets, computers, portable players, and compatible A\/V equipment. Both ends use straight connectors for conventional front, side, or rear-panel jack access.\u003c\/p\u003e\u003cp\u003eTwo individually shielded conductors help separate the stereo channels while the cable carries left and right analog audio. The construction is designed to help limit the influence of handling and nearby electrical noise on a low-level audio connection. Gold-plated connector contacts provide the cable's plug contact surfaces.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2447 flexible microphone cable. That cable stock uses a flexible PVC outer jacket and a compact 5mm outer diameter. The result is a cable that can be routed easily in close-range setups without adding unnecessary bulk.\u003c\/p\u003e\u003cp\u003eUse the GOLD 3.5 3.5 03 when both connected components have standard 3.5mm stereo TRS jacks. It is an appropriate link between an auxiliary source and a compatible audio input, or between compact audio components. No adapters are included, so equipment with different connector types will require the appropriate separate adapter or cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm TRS To 3.5mm TRS:\u003c\/strong\u003e Connects two compatible stereo mini-jack devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot Length:\u003c\/strong\u003e Supports short, organized component connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connectors:\u003c\/strong\u003e Fits standard non-recessed jack layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides gold-plated plug contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Conductors:\u003c\/strong\u003e Separates and shields the two audio conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PVC Jacket:\u003c\/strong\u003e Helps make routing and handling easier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable has black insulation, straight molded-style connector housings, and gold-plated contacts. Its W2447 cable stock has a 5mm outer diameter, 26 AWG conductors, individually served shields, and a flexible PVC jacket. These details support a compact, flexible form for routine analog audio interconnect use.\u003c\/p\u003e\u003cp\u003eConnect one TRS plug to a 3.5mm stereo output and the other to a 3.5mm stereo input. Confirm that both devices use standard 3.5mm TRS stereo jacks; this cable does not convert connector sizes or formats. Avoid sharply bending the cable at the connectors and route it away from pinch points where practical.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286886470,"sku":"GOLD 3.5 3.5 03","price":75.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61NTA5Jl4qL.jpg?v=1784263878"},{"product_id":"mogami-gold-db25-db25-05-8-channel-db25-analog-cable","title":"Mogami GOLD DB25-DB25-05 8-Channel DB25 Analog Cable","description":"\u003cp\u003eThe Mogami GOLD DB25-DB25-05 is a 5-foot, 8-channel analog interface cable built for routing multiple balanced audio channels between compatible DB25-equipped devices. It provides a compact alternative to running eight separate analog cables, helping keep equipment racks, patchbays, interfaces, and consoles organized. Its industry-standard analog DB25 pinout supports multichannel analog I\/O connections.\u003c\/p\u003e\u003cp\u003eThis cable is suited to recording studios, production rooms, broadcast installations, and other fixed audio systems using D-sub analog connections. It can connect compatible converters, consoles, patchbays, recording interfaces, and other multitrack equipment with DB25 analog I\/O. Both ends use DB25 connectors, so it is intended for systems that already provide matching analog DB25 ports.\u003c\/p\u003e\u003cp\u003eMogami builds this interface cable around its 2932 Neglex multipair cable, an eight-channel design with individually shielded wire sets. The construction is designed to help reduce electromagnetic and radio-frequency interference between channels. Individual channel identification also helps simplify organization during installation and service.\u003c\/p\u003e\u003cp\u003eEach channel uses stranded copper conductors, XLPE insulation, a drain wire, and a served bare-copper spiral shield. The flexible PVC outer jacket helps the cable route through studio furniture and behind equipment while maintaining an overall diameter of approximately 11.5 mm. Metal D-sub shells and thumbscrews provide a secure physical connection at each end.\u003c\/p\u003e\u003cp\u003eThe GOLD DB25-DB25-05 is a signal cable only and does not add inputs, outputs, amplification, or audio conversion. It is a practical connection link for systems already configured around the standard analog DB25 format. For installations requiring additional reach, Mogami offers this cable type in other lengths.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Carries eight channels of analog audio through one DB25-to-DB25 cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Analog Pinout:\u003c\/strong\u003e Supports compatible multichannel equipment using industry-standard DB25 analog wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2932 Cable:\u003c\/strong\u003e Uses an eight-channel Neglex multipair cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Shielding:\u003c\/strong\u003e Shielded wire sets help limit interference between audio channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal D-Sub Shells:\u003c\/strong\u003e Rugged connector shells protect the DB25 terminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Foot Length:\u003c\/strong\u003e Provides a short 5-foot run for nearby rack or patchbay connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses a flexible PVC outer jacket over Mogami 2932 eight-channel multipair cable. Its channel pairs use XLPE insulation, individual drain wires, and served bare-copper spiral shielding. All-metal DB25 shells, gold-plated contacts, and metal thumbscrews are used at the connector ends.\u003c\/p\u003e\u003cp\u003eConfirm that both connected devices use DB25 analog I\/O and the same industry-standard analog pinout before installation. Align each DB25 connector carefully, seat it fully, and tighten the thumbscrews by hand to secure the connection. The 5-foot length is well suited to close-proximity equipment such as interfaces, converters, consoles, and patchbays.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599287083078,"sku":"GOLD DB25-DB25-05","price":219.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51Qd_xsFPfL.jpg?v=1784263896"},{"product_id":"mogami-gold-inst-silent-r-18-18-guitar-cable","title":"Mogami GOLD INST SILENT R 18 18' Guitar Cable","description":"\u003cp\u003eThe Mogami GOLD INST SILENT R-18 is an 18-foot instrument cable built for guitar, bass, acoustic-electric, keyboard, and pedal-based rigs using 1\/4-inch TS connections. It combines a right-angle Neutrik silentPLUG on the instrument end with a straight Neutrik connector on the amplifier or pedal end. This layout helps keep the instrument-side connection compact while providing a conventional straight connection at the other end.\u003c\/p\u003e\u003cp\u003eThe right-angle silentPLUG is designed for musicians who need to change instruments during a session or performance without the usual disconnect pop. Its internal switching mechanism silences the cable while it is unplugged. The red-finished silentPLUG end also makes it easy to identify which side belongs at the instrument.\u003c\/p\u003e\u003cp\u003eThis cable is made with Mogami 2524 instrument cable, using an oxygen-free copper conductor and a conductive PVC sub-shield. The cable construction is intended for unbalanced, high-impedance instrument signals. Its carbon-impregnated PVC layer helps reduce handling-related noise when the cable moves during use.\u003c\/p\u003e\u003cp\u003eAn ultra-high-density served spiral shield surrounds the cable construction to support noise rejection in stage, rehearsal, recording, and home music setups. The 18-foot length provides useful reach between an instrument and an amplifier, pedalboard, or interface without requiring an extension. Both ends use 1\/4-inch TS male connectors for standard mono instrument connections.\u003c\/p\u003e\u003cp\u003eThe GOLD INST SILENT R-18 is a practical upgrade for players who want a dedicated cable for a primary instrument connection. Its right-angle plug can suit recessed or side-mounted instrument jacks, while the straight plug can connect to an amp or pedalboard input. Mogami includes a lifetime warranty with this Gold Instrument Silent series cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeutrik silentPLUG:\u003c\/strong\u003e Automatically silences the cable while unplugged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Instrument End:\u003c\/strong\u003e Helps fit side-mounted and recessed instrument jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Foot Length:\u003c\/strong\u003e Provides reach for stage and studio setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2524 Cable:\u003c\/strong\u003e Uses Mogami's low-noise instrument cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Center Conductor:\u003c\/strong\u003e Uses an oxygen-free copper signal conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductive PVC Sub-Shield:\u003c\/strong\u003e Helps reduce handling-related static noise.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses black Mogami 2524 wire with a 6.0 mm outer diameter, a conductive carbon PVC sub-shield, a served OFC main shield, and a flexible PVC outer jacket. The silentPLUG is a Neutrik right-angle 1\/4-inch TS male connector, and the opposite end is a straight Neutrik 1\/4-inch TS male connector. The right-angle silent connector has a red finish for quick identification.\u003c\/p\u003e\u003cp\u003eConnect the right-angle silentPLUG to the instrument and the straight plug to an amplifier input, pedalboard input, or other compatible 1\/4-inch TS instrument input. The cable is intended for unbalanced instrument connections, not balanced TRS or speaker-level connections. For silent instrument changes, leave the receiving equipment connected and use the silentPLUG end at the instrument.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599287246918,"sku":"GOLD INST SILENT R 18","price":119.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61FU5NsSrXL.jpg?v=1784263913"},{"product_id":"mogami-gold-inst-silent-r-25-25-silent-instrument-cable","title":"Mogami GOLD INST SILENT R 25 25' Silent Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INST SILENT R 25 is a 25-foot unbalanced instrument cable built for guitars, basses, keyboards, pedals, and other equipment using 1\/4-inch TS connections. It combines a right-angle Neutrik Silent Plug at one end with a straight Neutrik connector at the other. The Silent Plug is designed to reduce switching noise when disconnecting or connecting an instrument.\u003c\/p\u003e\u003cp\u003eThis cable is well suited to players who need a longer stage or studio run while keeping a low-capacitance instrument connection. Its right-angle end can be useful at recessed or side-mounted instrument jacks where a straight connector may protrude farther. The straight end provides a conventional connection for an amplifier, pedalboard, or compatible input.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with its 2524 instrument cable, which uses a #20 AWG oxygen-free copper center conductor. The cable's 130 pF\/m capacitance specification helps make it appropriate for high-impedance instrument signals. A conductive PVC sub-shield is used to help control handling-related noise in moving cable applications.\u003c\/p\u003e\u003cp\u003eThe cable uses a served shield around the signal path for coverage against external interference. Its black PVC outer jacket has a 6.0 mm outside diameter, balancing protection with practical flexibility. The internal construction is rated for repeated flexing and is intended for instrument-cable use rather than speaker-level wiring.\u003c\/p\u003e\u003cp\u003eFor a guitar or bass setup, place the red right-angle Silent Plug end at the instrument and connect the straight end to a pedal, amplifier, or other compatible 1\/4-inch TS input. The 25-foot length gives added reach for larger performance spaces, rehearsal rooms, and studio layouts. It can also serve as a single unbalanced link within a compatible pedal-and-amplifier signal chain.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Length:\u003c\/strong\u003e Provides extended reach for stage, studio, and rehearsal setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeutrik Silent Plug:\u003c\/strong\u003e Helps reduce pop noise during instrument hot-swapping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Connector:\u003c\/strong\u003e Fits neatly at many instrument-mounted 1\/4-inch jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2524 Cable:\u003c\/strong\u003e Uses a #20 AWG oxygen-free copper center conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductive PVC Layer:\u003c\/strong\u003e Helps reduce handling-related cable noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Density Shielding:\u003c\/strong\u003e Adds protection against external noise and interference.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD INST SILENT R 25 uses black Mogami 2524 cable with a PE dielectric, conductive carbon-PVC sub-shield, served main shield, and PVC jacket. Its center conductor is oxygen-free copper, while the cable jacket measures 6.0 mm in outside diameter. One end uses a 1\/4-inch TS right-angle Neutrik Silent Plug, and the other uses a 1\/4-inch TS straight Neutrik connector with a gold-plated contact.\u003c\/p\u003e\u003cp\u003eConnect the right-angle Silent Plug end to the instrument side and the straight end to a compatible 1\/4-inch TS input on a pedal, amplifier, keyboard, or other unbalanced instrument device. Route the cable away from power cords where practical and avoid sharp bends or pinching under equipment. This is a mono TS instrument cable, so both connected devices should use compatible unbalanced 1\/4-inch TS connections.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599287476294,"sku":"GOLD INST SILENT R 25","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61FU5NsSrXL_4f8cb2af-4f31-46e4-b55b-524fa1605989.jpg?v=1784263937"},{"product_id":"mogami-gold-inst-silent-s-10r-10-instrument-cable","title":"Mogami GOLD INST SILENT S 10R 10' Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INST SILENT S 10R is a 10-foot unbalanced instrument cable for connecting an electric guitar, bass, keyboard, or pedal-equipped instrument to an amplifier, pedalboard, interface, or other compatible 1\/4-inch TS input. It combines a straight Neutrik silentPLUG connector with a right-angle 1\/4-inch TS connector. This configuration is useful when an instrument jack or pedalboard layout benefits from a lower-profile right-angle connection.\u003c\/p\u003e\u003cp\u003eThe straight silentPLUG is designed to mute the cable while it is disconnected, helping reduce the pop associated with swapping guitars or basses with an active signal path. It is intended for musicians who change instruments during rehearsals, recording sessions, or live performances. The cable carries a mono, unbalanced instrument signal rather than a balanced TRS or speaker-level connection.\u003c\/p\u003e\u003cp\u003eMogami builds this Gold Instrument Silent cable around its W2524 instrument cable design. Its oxygen-free copper center conductor, conductive carbon-PVC sub-shield, and ultra-high-density spiral shield are designed to support low handling noise and shielding in typical instrument-cable use. The construction is suited to high-impedance passive pickup applications where cable handling and capacitance can matter.\u003c\/p\u003e\u003cp\u003eAt 10 feet long, this cable suits short runs between an instrument and amp, pedalboard, or recording input. The right-angle plug can help reduce protrusion from side-mounted or recessed instrument jacks. The straight silentPLUG should be used at the end where silent instrument swapping is desired.\u003c\/p\u003e\u003cp\u003eThe GOLD INST SILENT S 10R is a complete terminated cable, so no separate connectors or soldering are required. It can be used as part of a guitar or bass rig, or with other unbalanced 1\/4-inch TS instruments that accept this connection type. Mogami covers the cable with its lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides a compact instrument-cable run for stage, studio, or practice setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeutrik silentPLUG:\u003c\/strong\u003e Mutes the cable while disconnected to reduce switching pops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight-To-Right-Angle Ends:\u003c\/strong\u003e Accommodates standard inputs and space-conscious instrument jack locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4-Inch TS Connectors:\u003c\/strong\u003e Supports mono, unbalanced instrument-signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2524 Cable Construction:\u003c\/strong\u003e Uses Mogami's high-impedance guitar cable design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Includes Mogami lifetime warranty coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis cable uses a black PVC jacket over an ultra-high-density served spiral shield, conductive carbon-PVC sub-shield, polyethylene insulation, and oxygen-free copper conductor. The cable's finished connector arrangement is one straight Neutrik silentPLUG and one right-angle TS plug, with gold-plated contacts. Its 6.0 mm outer cable diameter provides a substantial yet manageable instrument-cable profile.\u003c\/p\u003e\u003cp\u003eConnect the silentPLUG end to the instrument when silent swapping is the priority, then connect the right-angle end where its compact orientation is most useful. Use the cable only between compatible unbalanced 1\/4-inch TS instrument-level connections; it is not a speaker cable. Keep the cable away from sharp edges, avoid tightly kinking it, and route it so plugs are not subjected to excessive side force.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599287640134,"sku":"GOLD INST SILENT S 10R","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JI3Eb4OUL.jpg?v=1784263955"},{"product_id":"mogami-gold-inst-silent-s-18r-18-guitar-instrument-cable","title":"Mogami GOLD INST SILENT S 18R 18' Guitar Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INST SILENT S 18R is an 18-foot unbalanced instrument cable for connecting an electric guitar, bass, keyboard, or similar instrument to an amplifier or pedal system. It uses 1\/4-inch TS plugs, with a straight silentPLUG at one end and a right-angle plug at the other. This configuration helps keep the cable routing practical when an instrument or pedal setup benefits from a low-profile right-angle connection.\u003c\/p\u003e\u003cp\u003eThe straight Neutrik silentPLUG is designed for the instrument end of the cable. Its internal switch mutes the cable while it is unplugged, helping reduce pops and squeals when changing instruments under load. The red finish identifies the silent end for quicker setup onstage or in a studio.\u003c\/p\u003e\u003cp\u003eMogami builds this cable with W2524 instrument cable, which uses an oxygen-free copper center conductor and a conductive PVC sub-shield. The cable construction is intended to reduce handling-related noise that can occur as an instrument cable is moved, flexed, or stepped on. Its high-density shield supports dependable signal transfer in typical instrument-level signal paths.\u003c\/p\u003e\u003cp\u003eThis is a passive, mono TS cable intended for unbalanced instrument connections rather than balanced TRS lines or amplifier-to-speaker connections. The 18-foot length provides useful reach between a player and an amp, pedalboard, or recording input without requiring an extension. The right-angle end can be especially useful at pedal inputs or side-mounted instrument jacks.\u003c\/p\u003e\u003cp\u003eAs part of a guitar or bass setup, the GOLD INST SILENT S 18R can replace a standard instrument lead where quieter instrument changes and durable connector construction are priorities. It pairs naturally with pedals, amplifiers, DI inputs, and other equipment that accepts a 1\/4-inch TS instrument signal. A limited lifetime manufacturer warranty is included with the cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Silent Plug:\u003c\/strong\u003e Mutes the instrument cable during unplugging to help reduce switching noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle TS Plug:\u003c\/strong\u003e Provides a space-conscious connection for pedals, amps, and side-mounted jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Foot Length:\u003c\/strong\u003e Gives practical reach for stage, rehearsal, and studio instrument setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2524 Cable:\u003c\/strong\u003e Uses a #20 AWG oxygen-free copper center conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductive PVC Layer:\u003c\/strong\u003e Helps drain microphonic noise created by cable movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Density Shielding:\u003c\/strong\u003e Supports low-noise unbalanced instrument signal transmission.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable has a black PVC outer jacket with a 6.0 mm outside diameter and a conductive carbon-PVC sub-shield beneath its served main shield. Neutrik connector components are used, including gold-plated contacts and a red rubber-overlaid straight silentPLUG housing. The right-angle connector helps reduce cable protrusion where space is limited.\u003c\/p\u003e\u003cp\u003eConnect the straight silentPLUG end to the instrument and the right-angle TS end to an amplifier input, pedal input, or other compatible 1\/4-inch TS instrument input. It is intended for instrument-level connections and should not be connected between an amplifier output and a speaker cabinet. For active instruments using a TRS output jack to switch battery power, the silent-muting function may not operate as expected.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599287869510,"sku":"GOLD INST SILENT S 18R","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JI3Eb4OUL_6307aa5f-03d7-4265-8599-1d028b2d5ff0.jpg?v=1784263979"},{"product_id":"mogami-gold-inst-silent-s-25-25-silent-instrument-cable","title":"Mogami GOLD INST SILENT S 25 25' Silent Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INST SILENT S 25 is a 25-foot unbalanced instrument cable with straight 1\/4-inch TS connectors. It is designed for connecting an electric guitar, bass, keyboard, or pedal-equipped instrument to an amplifier, pedal, or compatible unbalanced input. Its Neutrik Silent Plug helps prevent the loud switching pop that can occur when unplugging an instrument from a live signal chain.\u003c\/p\u003e\u003cp\u003eThis cable is suited to players who need extra reach on stage, in rehearsal spaces, or in studio setups. One end uses a straight Neutrik Silent Plug with a red identifying finish, while the other uses a standard straight Neutrik 1\/4-inch TS connector. The silent end is intended for the instrument side of the connection.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with its 2524 instrument cable, which uses an oxygen-free copper center conductor and a conductive carbon-PVC sub-shield. The cable's ultra-high-density spiral shield is designed to support reliable signal shielding in environments with potential electrical interference. Carbon-impregnated PVC also helps reduce handling noise caused by cable movement.\u003c\/p\u003e\u003cp\u003eThe 25-foot length provides practical flexibility for players moving between an instrument and an amp, pedalboard, recording interface, or stage input. Its straight-to-straight connector layout works well where both jacks are easy to access and do not require a low-profile right-angle plug. The cable carries a standard mono TS instrument signal rather than a balanced XLR or stereo TRS connection.\u003c\/p\u003e\u003cp\u003eFor a guitar or bass rig, the Silent Plug can be connected at the instrument output and the conventional straight plug can feed the first pedal or amplifier input. This makes it a useful upgrade for setups where instruments are changed during rehearsals or performances. Mogami includes a lifetime warranty with the Gold Instrument Silent series.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeutrik Silent Plug:\u003c\/strong\u003e Helps mute the cable while disconnecting an instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Length:\u003c\/strong\u003e Provides extended reach for stage and studio setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Center Conductor:\u003c\/strong\u003e Uses oxygen-free copper for signal transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Shielding:\u003c\/strong\u003e Helps protect the unbalanced signal from interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductive PVC Sub-Shield:\u003c\/strong\u003e Supports low-noise cable handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight TS Connectors:\u003c\/strong\u003e Fits standard 1\/4-inch mono instrument jacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD INST SILENT S 25 uses Mogami 2524 coaxial instrument cable with a black PVC outer jacket, clear polyethylene insulation, conductive carbon-PVC sub-shield, and served spiral shield. Its oxygen-free copper center conductor is paired with Neutrik 1\/4-inch TS connector components. The Silent Plug end is marked in red for quick identification.\u003c\/p\u003e\u003cp\u003eConnect the red Silent Plug end to the instrument output, then connect the standard straight plug to an amplifier input, pedal input, or other compatible unbalanced 1\/4-inch TS input. It is intended for instrument-level mono connections and should not be used in place of a speaker cable between an amplifier head and passive speaker cabinet. Route the cable away from power cords where practical and avoid sharp bends or pinch points during setup.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599288033350,"sku":"GOLD INST SILENT S 25","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61lTV1wuo1L.jpg?v=1784263997"},{"product_id":"mogami-gold-inst-silent-s-25r-25-silent-instrument-cable","title":"Mogami GOLD INST SILENT S 25R 25' Silent Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INST SILENT S 25R is a 25-foot unbalanced instrument cable made for connecting guitars, basses, keyboards, and other compatible instruments to amps, pedals, or direct boxes. It combines a right-angle 1\/4-inch TS plug at one end with a straight Neutrik Silent Plug at the other. This layout is useful where a right-angle connection helps keep the cable close to a side-mounted instrument jack.\u003c\/p\u003e\u003cp\u003eThe straight Silent Plug is designed to mute the instrument cable while it is unplugged, helping reduce the pop that can occur during instrument changes under load. This makes the cable well suited to players who switch guitars during rehearsals, performances, or recording sessions. The silent connector is identified by its red finish.\u003c\/p\u003e\u003cp\u003eMogami builds this cable with its 2524 instrument cable, using an oxygen-free copper core and a conductive polymer sub-shield. A high-density spiral shield helps protect the unbalanced signal path from external interference. Carbon-impregnated PVC is used as an anti-static layer to help reduce handling noise.\u003c\/p\u003e\u003cp\u003eWith 25 feet of reach, this cable provides useful distance between an instrument and an amplifier, pedalboard, or recording setup. The right-angle plug can be especially practical with instruments whose output jacks are located on the body edge. Its TS connections are intended for standard mono instrument-level signal paths.\u003c\/p\u003e\u003cp\u003eThe GOLD INST SILENT S 25R is a focused upgrade for players who want a long instrument cable with quiet unplugging capability and durable Neutrik connector components. It is appropriate for electric guitar, bass guitar, acoustic-electric guitar, keyboards, pedals, and similar unbalanced instrument connections. Mogami includes its limited lifetime manufacturer warranty with the cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Length:\u003c\/strong\u003e Provides extended reach for stage, studio, and practice setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Silent Plug:\u003c\/strong\u003e Mutes the cable during unplugging to reduce switching noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle TS Plug:\u003c\/strong\u003e Helps manage cable routing at side-mounted instrument jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2524 Cable:\u003c\/strong\u003e Uses Mogami instrument cable construction for unbalanced signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Core:\u003c\/strong\u003e Oxygen-free copper conductor supports clear instrument signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Layer Shielding:\u003c\/strong\u003e Spiral, polymer, and anti-static layers help control noise.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis cable uses black Mogami 2524 instrument wire with Neutrik connector components and gold-plated contacts. Its construction includes an oxygen-free copper core, conductive polymer sub-shield, high-density spiral shield, and carbon-impregnated PVC anti-static layer. The straight Silent Plug has a red finish for identification.\u003c\/p\u003e\u003cp\u003eConnect the straight Silent Plug end to the instrument when using its quiet unplugging function, and connect the right-angle TS end to the remaining instrument-level connection as needed. Use it with 1\/4-inch TS instrument inputs and outputs, such as a guitar or bass feeding a pedalboard, amplifier, or DI input. Do not connect the Silent Plug to an amplifier speaker output.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599288262726,"sku":"GOLD INST SILENT S 25R","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JI3Eb4OUL_c6c63137-ab17-4c60-b0ce-36c7e37fd398.jpg?v=1784264022"},{"product_id":"mogami-gold-instrument-18r-18-right-angle-instrument-cable","title":"Mogami GOLD INSTRUMENT-18R 18' Right-Angle Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INSTRUMENT-18R is an 18-foot unbalanced instrument cable designed for electric guitar, bass, pedalboard, and other high-impedance 1\/4-inch TS connections. It uses one straight plug and one right-angle plug, providing a practical option where a low-profile connection is helpful at the instrument, pedal, or amplifier. The cable is intended to carry an instrument-level signal between compatible devices.\u003c\/p\u003e\u003cp\u003eThis cable is suited to players building a dependable guitar-to-amp or guitar-to-pedalboard connection for rehearsal, recording, or performance use. Its 18-foot length provides room to move while keeping the setup manageable. The right-angle end can help reduce protrusion from side-mounted or recessed instrument jacks.\u003c\/p\u003e\u003cp\u003eMogami builds the Gold Instrument series around its W2524 instrument cable, a single-conductor, shielded cable made for high-impedance applications. The oxygen-free copper conductor and relatively low cable capacitance support clear signal transfer over the cable run. A conductive carbon-PVC sub-shield is included to reduce noise created when the cable is handled or flexed.\u003c\/p\u003e\u003cp\u003eThe cable's served shield helps reject externally induced electrical interference in typical studio, rehearsal, and stage environments. Its black PVC outer jacket surrounds a 20 AWG center conductor, insulation, sub-shield, and shield structure. Gold-contact 1\/4-inch TS connectors provide the physical connection at each end.\u003c\/p\u003e\u003cp\u003eUse the GOLD INSTRUMENT-18R as a direct lead from a passive or active instrument to an amplifier, pedal, DI-compatible instrument input, or other unbalanced TS instrument connection. It is not a speaker cable and should not be used between an amplifier head and a speaker cabinet. For complete system planning, pair it with equipment that accepts standard 1\/4-inch TS instrument-level connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Foot Instrument Lead:\u003c\/strong\u003e Provides a practical reach for guitar, bass, pedalboard, and amplifier setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight-To-Right-Angle Ends:\u003c\/strong\u003e Combines a standard plug with a low-profile right-angle TS plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2524 Cable:\u003c\/strong\u003e Uses shielded high-impedance instrument cable with a 20 AWG OFC conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-PVC Sub-Shield:\u003c\/strong\u003e Helps reduce noise caused by cable movement and handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Shield:\u003c\/strong\u003e Helps limit interference pickup around electrical and lighting equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Factory-assembled Mogami cable assemblies are covered for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD INSTRUMENT-18R uses a black PVC jacket over a polyethylene-insulated oxygen-free copper conductor, conductive carbon-PVC sub-shield, and served shield. The bulk W2524 cable has a 6.0 mm outer diameter and is designed for flexible instrument-cable use. One end is straight and the other is right angle, with gold-contact 1\/4-inch TS plugs.\u003c\/p\u003e\u003cp\u003eConnect the cable between an electric guitar, bass, pedal, pedalboard, or other compatible unbalanced instrument source and an instrument-level input. Choose the right-angle end for the jack location where reduced plug projection is most useful, then route the cable to avoid sharp bends, pinch points, and foot traffic. Use proper over-under coiling when storing the cable, and use a dedicated speaker cable rather than this instrument cable for amplifier-to-cabinet connections.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599289966662,"sku":"GOLD INSTRUMENT-18R","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/513ngux-T2L.jpg?v=1784264117"},{"product_id":"mogami-gold-instrument-25-25-ft-ts-instrument-cable","title":"Mogami GOLD INSTRUMENT-25 25 ft TS Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INSTRUMENT-25 is a 25-foot unbalanced instrument cable for connecting an electric guitar, bass, keyboard, or effects device to an amplifier, pedalboard, or compatible audio input. It uses straight 1\/4-inch TS male connectors at both ends for traditional instrument-cable connections. Its length suits stage setups, rehearsal spaces, and studio rigs that need more reach than a short patch cable.\u003c\/p\u003e\u003cp\u003eThis cable is built around Mogami 2524 high-impedance instrument cable, using a 20 AWG oxygen-free copper center conductor. Its low-capacitance construction is intended to help retain the character of passive instrument pickups over a longer cable run. It is designed for musicians and audio users who want a durable, shielded cable for regular performance or recording use.\u003c\/p\u003e\u003cp\u003eA conductive carbon-PVC sub-shield is used to reduce handling-related noise caused by movement and flexing. The cable also uses a high-density served shield to help limit interference around unbalanced instrument signals. This makes it a practical choice for guitar-to-amp, bass-to-pedalboard, and instrument-to-DI or interface connections where a quiet signal path is important.\u003c\/p\u003e\u003cp\u003eBoth ends terminate in straight 1\/4-inch TS male plugs with gold-plated contacts and a black epoxy finish. The TS format carries a mono, unbalanced signal and is the standard connection used by most passive electric instruments, stompboxes, and guitar amplifiers. It is not a speaker cable and should not be used between a power amplifier and a passive speaker cabinet.\u003c\/p\u003e\u003cp\u003eThe 25-foot length can serve as a main instrument lead between a player and an amp or as a longer connection in a pedal-based rig. Its 6.0 mm outer cable diameter provides a substantial jacket while retaining flexibility for routing and coiling. Mogami backs the Gold Instrument cable line with a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Length:\u003c\/strong\u003e Provides extra reach for stage, rehearsal, and studio setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2524 Cable:\u003c\/strong\u003e Uses low-capacitance high-impedance instrument cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 AWG OFC Conductor:\u003c\/strong\u003e Uses an oxygen-free copper center conductor for signal transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon PVC Sub-Shield:\u003c\/strong\u003e Helps reduce noise from cable movement and handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Density Served Shield:\u003c\/strong\u003e Helps reduce electromagnetic interference in unbalanced signal paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Gold-Plated TS Plugs:\u003c\/strong\u003e Fits standard 1\/4-inch mono instrument connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD INSTRUMENT-25 uses a 6.0 mm black PVC outer jacket, polyethylene insulation, a conductive PVC sub-shield, and a served shield made with oxygen-free copper strands. Its 20 AWG center conductor is constructed from 50 strands of 0.12 mm oxygen-free copper. Straight TS plugs at both ends have gold-plated contacts and a black epoxy finish.\u003c\/p\u003e\u003cp\u003eConnect one end to a guitar, bass, keyboard, pedal output, or other 1\/4-inch TS instrument output, then connect the other end to a compatible amplifier, pedal input, DI box, or instrument input. Route the cable away from AC adapters, power transformers, and high-current power wiring when possible. Coil it loosely after use and avoid using it as a speaker-level cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599290130502,"sku":"GOLD INSTRUMENT-25","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61eZpidCHVL.jpg?v=1784264134"},{"product_id":"mogami-gold-instrument-25r-25-ft-ts-instrument-cable","title":"Mogami GOLD INSTRUMENT-25R 25 ft TS Instrument Cable","description":"\u003cp\u003eThe Mogami GOLD INSTRUMENT-25R is a 25-foot unbalanced instrument cable for connecting an electric guitar, bass, keyboard, pedalboard, or other compatible instrument to an amplifier or audio device with 1\/4-inch TS inputs. Its straight-to-right-angle connector layout helps provide a practical fit at a guitar-mounted output jack or tightly spaced pedal connection. It is designed for players who need a longer cable run without adding unnecessary handling noise or interference.\u003c\/p\u003e\u003cp\u003eThis cable uses Mogami W2524 instrument cable, built around a 20 AWG oxygen-free copper center conductor. Its low-capacitance design is intended to retain the natural character of passive instrument pickups across a longer run. The result is a clean, unbalanced signal path suited to rehearsal rooms, stages, studios, and home practice rigs.\u003c\/p\u003e\u003cp\u003eA conductive carbon-PVC sub-shield is placed beneath the main shield to help control noise caused by cable movement, flexing, or foot contact. The dense served shield also helps reduce interference entering the signal path. These construction details make the cable appropriate for active performers and setups located near power supplies, lighting, or other electronic equipment.\u003c\/p\u003e\u003cp\u003eOne end uses a standard straight 1\/4-inch TS plug, while the other uses a right-angle 1\/4-inch TS plug. The right-angle end can reduce connector protrusion where space is limited and can be especially useful at side-mounted or front-facing instrument jacks. Gold-plated contacts support reliable electrical contact and corrosion resistance over regular use.\u003c\/p\u003e\u003cp\u003eThe GOLD INSTRUMENT-25R fits between an instrument and amp, an instrument and pedalboard, or other compatible unbalanced 1\/4-inch TS connections. At 25 feet, it gives players useful room to move while retaining the robust construction of Mogami W2524 cable. It is backed by Mogami's limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Length:\u003c\/strong\u003e Provides extra reach for stage, studio, and rehearsal setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2524 Cable:\u003c\/strong\u003e Uses Mogami's 20 AWG instrument cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Plug:\u003c\/strong\u003e Helps manage space at guitar jacks and pedals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon PVC Sub-Shield:\u003c\/strong\u003e Helps reduce noise caused by cable movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Shield:\u003c\/strong\u003e Helps block external electrical interference from the signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Support durable, corrosion-resistant connector contact.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable has a black PVC outer jacket with a 6.0 mm outside diameter, a clear polyethylene insulation layer, and a conductive PVC sub-shield beneath its served copper shield. Its oxygen-free copper center conductor measures 0.565 mm², equivalent to 20 AWG. The straight and right-angle TS connectors use gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the straight or right-angle 1\/4-inch TS plug to the output on a compatible unbalanced instrument, pedal, or amplifier, then connect the remaining plug to the matching TS input. The right-angle plug is useful where a straight connector would extend too far from the instrument or pedalboard. This is a mono unbalanced cable and is not intended for balanced XLR or TRS stereo connections.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599290294342,"sku":"GOLD INSTRUMENT-25R","price":109.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61O_oUi3_EL.jpg?v=1784264152"},{"product_id":"mogami-gold-speaker-so-15-15-speakon-speaker-cable","title":"Mogami GOLD SPEAKER SO-15 15' speakON Speaker Cable","description":"\u003cp\u003eThe Mogami GOLD SPEAKER SO-15 is a 15-foot amplifier-to-speaker-cabinet cable built for systems using 4-pole Neutrik speakON connections. It provides a dedicated, locking speaker-level connection between a power amplifier and a compatible cabinet. This makes it a practical choice for bass rigs, PA systems, stage monitoring, and other professional audio applications.\u003c\/p\u003e\u003cp\u003eIts 14 AWG, four-conductor cable construction is designed to maintain a low-resistance path from amplifier to speaker. The highly stranded conductors support a flexible handling feel while carrying speaker-level signal. Mogami uses low-inductance star wiring to support efficient power transfer and controlled low-frequency performance.\u003c\/p\u003e\u003cp\u003eThe GOLD SPEAKER SO-15 is intended for players, engineers, and installers who need a dependable speakON-to-speakON cable at a moderate 15-foot reach. Locking speakON connectors help prevent an accidental disconnect during setup or performance. Straight connectors at both ends keep the format simple for conventional amplifier and cabinet panel layouts.\u003c\/p\u003e\u003cp\u003eInside, this cable uses Mogami W2921 Superflexible Studio Speaker Cable, a four-conductor design with bare NEGLEX OFC copper conductors. Each conductor is sized at 14 AWG, with flexible PVC insulation and a matte-black flexible PVC outer jacket. The cable's construction is engineered for low DC resistance and low inductance.\u003c\/p\u003e\u003cp\u003eUse the GOLD SPEAKER SO-15 when both the amplifier's speaker output and the cabinet input use compatible 4-pole speakON connections. It is a speaker cable, not an instrument or line-level cable, and should be used only between a power amplifier and a passive speaker cabinet. The included 15-foot length suits rigs where the amp head and cabinet need some practical spacing without excessive cable slack.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Foot Length:\u003c\/strong\u003e Provides practical reach between an amplifier and speaker cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Pole speakON Plugs:\u003c\/strong\u003e Supports compatible locking speaker connections at both ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 AWG Conductors:\u003c\/strong\u003e Uses large-gauge conductors for low-resistance speaker signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Conductor Design:\u003c\/strong\u003e Built with four highly stranded internal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Inductance Star Wiring:\u003c\/strong\u003e Helps support efficient power transfer and bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Uses gold-contact straight speakON male plugs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD SPEAKER SO-15 is built around Mogami W2921 cable with bare NEGLEX OFC copper conductors, PVC conductor insulation, and a flexible matte-black PVC jacket. Its 11.3 mm outer cable diameter provides a substantial, professional speaker-cable format. Both ends use straight 4-pole Neutrik speakON male plugs with gold contacts.\u003c\/p\u003e\u003cp\u003eConnect one end to the speaker output of a compatible power amplifier and the other to a compatible passive speaker cabinet, then fully engage each speakON locking connector. Confirm that your amplifier and cabinet use matching 4-pole speakON connections before purchase. Do not use this cable as a guitar\/instrument cable, microphone cable, line-level interconnect, or AC power cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599290490950,"sku":"GOLD SPEAKER SO-15","price":252.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71no2xGjCpL.jpg?v=1784264172"},{"product_id":"mogami-gold-speaker-so-20-20-speakon-speaker-cable","title":"Mogami GOLD SPEAKER SO-20 20' speakON Speaker Cable","description":"\u003cp\u003eThe Mogami GOLD SPEAKER SO-20 is a 20-foot amplifier-to-speaker-cabinet cable for professional audio systems using 4-pole speakON connections. It is intended to carry amplified speaker-level signal between a power amplifier or bass head and a compatible cabinet. This is a speaker cable, not an instrument or line-level audio cable.\u003c\/p\u003e\u003cp\u003eBuilt around Mogami W2921 quad speaker cable, the GOLD SPEAKER SO-20 uses four highly stranded 14 AWG conductors. Its low-resistance construction is designed to support efficient power transfer in demanding amplifier-to-cabinet runs. The four-conductor format also supports low-inductance star wiring.\u003c\/p\u003e\u003cp\u003eThis cable is well suited to bass rigs, live-sound speaker systems, and other setups where a secure speakON connection is preferred. The 20-foot length provides useful placement flexibility for an amplifier and cabinet on stage or in a rehearsal space. Its black PVC jacket keeps the installation appearance clean and professional.\u003c\/p\u003e\u003cp\u003eNeutrik 4-pole speakON male plugs are fitted at both ends, providing twist-lock speaker connections. Gold contacts are specified for the connectors. Straight connector bodies make the cable easy to route from rear-mounted amplifier and cabinet connections.\u003c\/p\u003e\u003cp\u003eThe GOLD SPEAKER SO-20 fits into systems that already use 4-pole speakON-equipped amplifiers and speaker cabinets. It provides a ready-terminated alternative to assembling a bulk speaker cable and connectors separately. Mogami includes its limited lifetime manufacturer warranty with the cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides flexible amplifier-to-cabinet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2921 Speaker Cable:\u003c\/strong\u003e Uses Mogami quad speaker cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour 14 AWG Conductors:\u003c\/strong\u003e Supports low-resistance speaker-level signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStar Wiring Design:\u003c\/strong\u003e Helps maintain low inductance in the cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Pole speakON Plugs:\u003c\/strong\u003e Provides secure twist-lock speaker connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Contacts:\u003c\/strong\u003e Specified connector contacts complement the terminated design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD SPEAKER SO-20 uses a black flexible PVC outer jacket over four individually insulated NEGLEX oxygen-free copper conductors. The W2921 cable has a nominal 11.3 mm outer jacket diameter, while each insulated conductor measures 3.4 mm overall. Straight Neutrik 4-pole speakON connectors are installed at both cable ends.\u003c\/p\u003e\u003cp\u003eConnect one end to a compatible amplifier speaker output and the other to a compatible speaker-cabinet input, then twist the speakON connectors to lock them in place. Confirm that the amplifier and cabinet use compatible 4-pole speakON connections and follow the equipment manufacturers' wiring and impedance requirements. Use this cable only for amplifier-to-passive-speaker connections, not for line-level audio or instrument connections.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599290654790,"sku":"GOLD SPEAKER SO-20","price":298.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71no2xGjCpL_668e6994-81c6-48d8-8cf5-6fb86a0ed142.jpg?v=1784264187"},{"product_id":"mogami-gold-speaker-so-25-25-speakon-speaker-cable","title":"Mogami GOLD SPEAKER SO-25 25' speakON Speaker Cable","description":"\u003cp\u003eThe Mogami GOLD SPEAKER SO-25 is a 25-foot speaker cable with speakON connectors at both ends. It is designed to connect a compatible amplifier or powered output to a passive speaker cabinet. This is a professional audio speaker cable, not an instrument, microphone, or line-level signal cable.\u003c\/p\u003e\u003cp\u003eThis cable is suited to musicians, sound engineers, rehearsal spaces, studios, and PA users who need a longer speaker-level connection with speakON terminations. Its 25-foot length can be useful when an amplifier and cabinet need to be positioned farther apart onstage or in a rack-based system. Confirm that both connected devices use compatible speakON connections and matching pin assignments.\u003c\/p\u003e\u003cp\u003eThe GOLD SPEAKER SO-25 uses four conductors of Mogami 2921 speaker cable. Its low-resistance, 14 AWG conductors are intended for speaker-level signal transfer between an amplifier and cabinet. The star-quad cable construction is designed to keep inductance low for a consistent connection over its full 25-foot run.\u003c\/p\u003e\u003cp\u003eMogami 2921 uses highly stranded bare NEGLEX oxygen-free copper conductors with color-coded PVC insulation. A flexible matte-black PVC outer jacket protects the internal conductors while supporting repeated setup and teardown. The completed cable uses 4-pole speakON connectors for locking amplifier-to-speaker connections.\u003c\/p\u003e\u003cp\u003eUse the GOLD SPEAKER SO-25 where a speakON-to-speakON speaker run is needed between compatible equipment. It can fit bass, guitar, keyboard, studio-monitor, and professional PA speaker-cabinet applications when the equipment is designed for speaker-level speakON wiring. It is covered by Mogami's lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Length:\u003c\/strong\u003e Provides extra reach for amplifier-to-cabinet speaker connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003espeakON-to-speakON Ends:\u003c\/strong\u003e Connects equipment using compatible locking speakON ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2921 Cable:\u003c\/strong\u003e Uses Mogami's four-conductor studio speaker cable platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 AWG Conductors:\u003c\/strong\u003e Uses 2.53 mm² conductors for low-resistance speaker wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStar-Quad Construction:\u003c\/strong\u003e Four-conductor layout is engineered for low inductance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Includes Mogami lifetime warranty coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable is built around four highly stranded bare NEGLEX oxygen-free copper conductors, each protected by PVC insulation. Its flexible PVC jacket has a matte-black finish, an 11.3 mm outside diameter, and color-coded internal conductors in brown, red, orange, and yellow. The cable is rated for use from -20°C to +70°C (-4°F to +158°F).\u003c\/p\u003e\u003cp\u003eConnect one speakON end to a compatible amplifier or powered speaker output and the other to a compatible passive speaker cabinet input. Twist each connector until it locks, and route the cable to avoid pinching, sharp edges, and excessive strain. Verify connector pinout and speaker-load compatibility with the documentation for the amplifier and cabinet before powering the system.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599290818630,"sku":"GOLD SPEAKER SO-25","price":344.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71no2xGjCpL_2358502b-bbba-4113-a1ab-db3f7c59a503.jpg?v=1784264204"},{"product_id":"mogami-gold-speaker-03-3-1-4-ts-speaker-cable","title":"Mogami GOLD SPEAKER-03 3' 1\/4\" TS Speaker Cable","description":"\u003cp\u003eThe Mogami GOLD SPEAKER-03 is a 3-foot speaker cable with straight 1\/4-inch TS male connectors at both ends. It is designed to link a power amplifier or amplifier head to a passive speaker cabinet equipped with compatible 1\/4-inch speaker connections. Its short length is useful for compact amp-and-cabinet setups where excess cable is unnecessary.\u003c\/p\u003e\u003cp\u003eThis cable is intended for musicians, studios, rehearsal rooms, and live-performance rigs using separate amplifiers and speaker cabinets. It uses speaker-cable construction rather than instrument-cable construction, making it appropriate for carrying amplified speaker-level signals. Both cable ends use the same straight TS connector format for straightforward amp-to-cabinet routing.\u003c\/p\u003e\u003cp\u003eThe GOLD SPEAKER-03 uses Mogami W3082 coaxial speaker cable with 14 AWG oxygen-free copper conductors. Its low-resistance conductor design supports efficient signal transfer across a short speaker run. The cable is specified with a capacitance of 77 pF per foot and inductance of 0.12 microhenry per foot.\u003c\/p\u003e\u003cp\u003eMogami W3082 construction combines a central conductor with a served outer conductor in a coaxial layout. The cable uses PVC insulation and a flexible black PVC outer jacket, while its carbon-impregnated PVC construction is designed to control handling noise. An ultra-high-density spiral shield helps limit noise transfer into and out of the cable.\u003c\/p\u003e\u003cp\u003eUse the GOLD SPEAKER-03 when an amplifier and passive cabinet have 1\/4-inch TS speaker jacks and are positioned close together. It can replace a worn or unsuitable speaker lead in a compatible amplifier-to-cabinet signal path. Verify that the amplifier and cabinet are matched according to their own impedance and power requirements before connecting them.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot Length:\u003c\/strong\u003e Keeps close-range amplifier-to-cabinet connections neat and manageable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4-Inch TS Connectors:\u003c\/strong\u003e Provides straight male TS plugs on both cable ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW3082 Speaker Cable:\u003c\/strong\u003e Uses Mogami's coaxial W3082 cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 AWG OFC Conductors:\u003c\/strong\u003e Provides substantial oxygen-free copper conductor size for speaker-level signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PVC Jacket:\u003c\/strong\u003e Adds a durable, flexible exterior for regular setup use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Includes Mogami's lifetime manufacturer warranty coverage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD SPEAKER-03 is built around Mogami W3082 cable, with 80 strands of 0.18 mm oxygen-free copper in both the inner conductor and served outer conductor. It has white PVC insulation, a flexible black PVC jacket, and an approximately 6.5 mm outer jacket diameter. The straight plugs use copper cores with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect one TS plug to a compatible amplifier speaker output and the other to a compatible passive speaker cabinet input. This is a 3-foot TS-to-TS speaker cable, so no adapters are included or required when both components use standard 1\/4-inch TS speaker connections. Do not substitute an instrument cable where a speaker cable is required, and follow the amplifier and cabinet manufacturers' connection and impedance instructions.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599291015238,"sku":"GOLD SPEAKER-03","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/515epzfaxxL.jpg?v=1784264225"},{"product_id":"mogami-gold-speaker-06-6-ts-speaker-cable","title":"Mogami GOLD SPEAKER-06 6' TS Speaker Cable","description":"\u003cp\u003eThe Mogami GOLD SPEAKER-06 is a 6-foot speaker cable made to connect an amplifier or amp head to a passive speaker cabinet with 1\/4-inch TS speaker jacks. It provides a purpose-built alternative to using a standard instrument cable for an amp-to-cabinet connection. Both ends use straight 1\/4-inch TS male plugs for a direct, simple hookup.\u003c\/p\u003e\u003cp\u003eThis cable is intended for musicians, studios, rehearsal spaces, and live-performance rigs that use amplifiers and passive cabinets with 1\/4-inch speaker connections. Its 6-foot length is suited to short amp-head-to-cabinet runs. Confirm that both the amplifier speaker output and the cabinet input use compatible 1\/4-inch TS speaker connections before installation.\u003c\/p\u003e\u003cp\u003eMogami builds the GOLD SPEAKER-06 with W3082 coaxial speaker cable and approximately 14 AWG conductors. The cable uses oxygen-free copper conductors and a coaxial construction with a served shield conductor. This construction is designed for speaker-level signal transfer between an amplifier and a passive cabinet.\u003c\/p\u003e\u003cp\u003eThe W3082 cable has a flexible black PVC jacket, while the Gold Speaker assembly uses gold-plated connector contacts and copper-core 1\/4-inch plugs. Its shielded construction helps limit noise transfer into or out of the cable. Carbon-impregnated PVC is used to reduce handling noise.\u003c\/p\u003e\u003cp\u003eUse the GOLD SPEAKER-06 as the final connection from a compatible amplifier speaker output to a passive speaker cabinet. It is not a replacement for an instrument or patch cable between a guitar, pedal, mixer, or line-level device. The cable is supplied as a single 6-foot TS-to-TS speaker cable and is covered by Mogami's limited lifetime warranty for the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier-to-Cabinet Cable:\u003c\/strong\u003e Built for connecting a power amp or amp head to a passive speaker cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Length:\u003c\/strong\u003e Provides a compact connection length for nearby amplifier and cabinet placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/4-Inch TS Connectors:\u003c\/strong\u003e Uses straight male TS plugs at both ends for compatible speaker jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW3082 Cable:\u003c\/strong\u003e Uses Mogami coaxial speaker cable with approximately 14 AWG conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors support low-resistance speaker connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold-plated connector contacts and copper-core plugs complete the cable assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD SPEAKER-06 uses black flexible PVC-jacketed W3082 cable with a coaxial layout. Its inner and served shield conductors are each specified at 2.03 mm², and the cable has an approximately 6.5 mm outside diameter. The straight plug format keeps the connection conventional and easy to identify in amplifier-and-cabinet setups.\u003c\/p\u003e\u003cp\u003eConnect one TS plug to the amplifier's speaker output and the other to the passive cabinet's compatible 1\/4-inch speaker input with the amplifier powered off. Use it only where a speaker cable is required, rather than as an instrument or line-level interconnect. Keep the 6-foot run free of sharp bends, crushing, and strain at the connector ends.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599291899974,"sku":"GOLD SPEAKER-06","price":101.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61GIqf7AWaL.jpg?v=1784264250"},{"product_id":"mogami-gold-stage-20-20-ft-xlr-microphone-cable","title":"Mogami GOLD STAGE-20 20 Ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STAGE-20 is a 20-foot balanced microphone cable with a 3-pin XLR female connector on one end and a 3-pin XLR male connector on the other. It is intended for connecting microphones, mixers, stage boxes, preamps, and other equipment with balanced XLR connections. Its stage-oriented construction addresses the handling, coiling, and repeated setup demands common in live sound, broadcast, and studio environments.\u003c\/p\u003e\u003cp\u003eBuilt around Mogami W2791 Stage\/Broadcast cable, the GOLD STAGE-20 uses two 24 AWG conductors made from 105 strands of annealed bare copper each. This high-strand-count construction is designed to retain flexibility during frequent handling. A braided shield and twisted-pair balanced configuration help support low-noise signal transfer in electrically active environments.\u003c\/p\u003e\u003cp\u003eThe cable is suited to vocal microphones, instrument microphones, DI boxes, and balanced analog audio connections that use standard 3-pin XLR ports. Its electrical design includes controlled resistance, capacitance, and inductance characteristics for balanced microphone cable applications. Gold-contact, black-body XLR connectors provide a ready-to-use connection without requiring separate termination.\u003c\/p\u003e\u003cp\u003eFor touring rigs and installed production systems, the 5.5 mm flexible PVC jacket is compact enough for practical routing while remaining intended for rugged use. The W2791 cable construction is rated for operation from -20°C to +70°C (-4°F to +158°F). Its specified 131,000-cycle flex life supports applications involving repeated coiling and deployment.\u003c\/p\u003e\u003cp\u003eThe GOLD STAGE-20 can serve as a dependable primary microphone lead or as a standard-length connection between balanced XLR audio components. It is a direct fit for systems that already use XLR microphones and balanced inputs or outputs. Mogami backs this cable with a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot XLR Cable:\u003c\/strong\u003e Provides a practical length for microphone, stage, and studio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Two-Conductor Design:\u003c\/strong\u003e Supports balanced analog microphone and line-level signal paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105-Strand Copper Conductors:\u003c\/strong\u003e Helps maintain flexibility during frequent handling and coiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraided Shield:\u003c\/strong\u003e Adds durable shielding around the internal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLR Connectors:\u003c\/strong\u003e Uses 3-pin XLR male and female terminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's stated lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STAGE-20 uses Mogami W2791 cable with 24 AWG, 105-strand annealed bare-copper conductors, XLPE insulation, a braided shield, and a flexible PVC jacket. The cable has a 5.5 mm outer diameter and black jacket finish. Its XLR terminations use black connector bodies with gold contacts.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or source with a male XLR output, then connect the male XLR end to a mixer, interface, stage box, preamp, or other device with a female XLR input. Confirm that both connected devices use standard 3-pin balanced XLR wiring. No separate adapter is specified, so an adapter may be needed when connecting to TRS, RCA, USB, or other connector formats.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296061510,"sku":"GOLD STAGE-20","price":113.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iooTLzcxL.jpg?v=1784264271"},{"product_id":"mogami-gold-stage-30-30-ft-xlr-microphone-cable","title":"Mogami GOLD STAGE-30 30 Ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STAGE-30 is a 30-foot balanced XLR microphone cable designed for dependable signal routing between microphones, mixers, interfaces, stage boxes, and other XLR-equipped audio gear. It provides a practical connection length for live stages, rehearsal rooms, broadcast setups, and studio tracking spaces. Its female-to-male 3-pin XLR configuration supports standard balanced microphone connections.\u003c\/p\u003e\u003cp\u003eThis cable is intended for users who regularly deploy, coil, and move microphone lines. Mogami builds the Gold Stage series around its W2791 broadcast microphone cable, which uses high-strand-count conductors, a binder and filler system, and a braided shield. That construction is suited to applications where flexibility and repeated handling matter.\u003c\/p\u003e\u003cp\u003eThe W2791 cable uses two 24 AWG conductors and a braided shield for balanced audio signal transmission. Its electrical specifications include low conductor resistance and controlled capacitance characteristics. These details support clean signal delivery across the cable's 30-foot length in compatible balanced audio systems.\u003c\/p\u003e\u003cp\u003eFor demanding locations, the cable remains specified for use from -20°C to +70°C (-4°F to +158°F). Its 105-strand annealed bare-copper conductors are designed to retain flexibility during repeated movement. The black flexible PVC jacket has a compact 5.5 mm outside diameter for straightforward routing on stage or in a production setup.\u003c\/p\u003e\u003cp\u003eGold-contact, black-body 3-pin XLR connectors terminate the cable with one male and one female end. It can be used as a direct microphone lead or as part of a larger XLR signal chain between a microphone and an input device. The factory-assembled cable is covered by Mogami's lifetime warranty for the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot XLR Run:\u003c\/strong\u003e Provides useful reach for stage, studio, and broadcast microphone setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced 3-Pin XLR:\u003c\/strong\u003e Connects standard XLR microphones to compatible balanced inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2791 Cable:\u003c\/strong\u003e Uses Mogami's two-conductor broadcast microphone cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105-Strand Conductors:\u003c\/strong\u003e Supports flexibility for frequent handling and cable management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraided Shield:\u003c\/strong\u003e Adds shielding and physical durability for regularly used cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Factory-assembled cable is covered for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STAGE-30 uses Mogami W2791 cable with 105 strands of 0.05 mm annealed bare copper in each conductor, XLPE insulation, a braided shield, and a flexible black PVC jacket. The cable measures 5.5 mm in outside diameter and is fitted with black-body, gold-contact 3-pin XLR connectors. Its construction is specified for repeated flexing, with a manufacturer-rated flex life of 131,000 cycles under Mogami test methods.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or other device with a male XLR output, then connect the male XLR end to a mixer, audio interface, stage box, preamp, or other compatible female XLR input. Route the cable away from pinch points, sharp edges, and high-traffic areas where practical, and use cable ties or floor-safe cable covers when needed. This is a portable stage and production cable, not a cable specified for in-wall installation.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296225350,"sku":"GOLD STAGE-30","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iooTLzcxL_a7511dc8-4fe2-47fd-948a-142489d40912.jpg?v=1784264291"},{"product_id":"mogami-gold-stage-50-50-ft-xlr-microphone-cable","title":"Mogami GOLD STAGE-50 50 Ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STAGE-50 is a 50-foot balanced XLR microphone cable made for dependable signal routing between microphones, mixers, preamps, stage boxes, and other professional audio equipment. It provides a long-reach connection for live sound, broadcast, remote production, and studio applications. The cable terminates in standard 3-pin XLR male and female connectors for common balanced microphone and line-level connections.\u003c\/p\u003e\u003cp\u003eThis cable is designed for users who regularly coil, deploy, and handle cables in demanding environments. Its Mogami 2791 cable construction uses high-strand-count conductors intended to remain flexible while supporting repeated handling. The compact cable profile also helps it route cleanly through stage, rack, and recording setups.\u003c\/p\u003e\u003cp\u003eThe GOLD STAGE-50 uses two 24 AWG conductors in a balanced configuration with a braided shield. This construction is designed to support clean signal transfer while helping reduce interference in environments with lighting, power, wireless, and other electronic equipment. Gold-contact XLR connectors provide the familiar microphone-cable interface used across professional audio systems.\u003c\/p\u003e\u003cp\u003eInside, the cable uses 105 strands of 0.05 mm annealed bare copper per conductor and XLPE conductor insulation. The high strand count contributes to the cable's flexibility and long flex-life rating. Mogami specifies the underlying 2791 cable for use down to -20°C (-4°F), helping it remain practical for cold-weather production work.\u003c\/p\u003e\u003cp\u003eThe 50-foot length suits runs from a stage microphone to a mixer, snake, or interface positioned farther away. It can also serve as a balanced connection for compatible XLR-equipped gear when the signal wiring is appropriate. For a complete setup, pair it with equipment that provides matching 3-pin XLR connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot XLR Run:\u003c\/strong\u003e Provides extended reach for stage, studio, and broadcast routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Construction:\u003c\/strong\u003e Uses two conductors for balanced microphone or line connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105-Strand Conductors:\u003c\/strong\u003e Supports flexibility for frequent setup and teardown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraided Shield:\u003c\/strong\u003e Helps reduce electromagnetic interference in active production environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLR Ends:\u003c\/strong\u003e Uses 3-pin XLR male and female connectors with gold contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Coverage:\u003c\/strong\u003e Includes Mogami's limited lifetime manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STAGE-50 is built around Mogami 2791 balanced microphone cable with 24 AWG, 105-strand annealed bare-copper conductors, XLPE insulation, a braided shield, and a flexible PVC outer jacket. Its cable diameter is 5.5 mm, and the finished cable uses black-body 3-pin XLR connectors with gold contacts. The underlying cable is rated for operation from -20°C to +70°C (-4°F to +158°F).\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or source with a male XLR output, then connect the male XLR end to a mixer, preamp, stage box, interface, or other destination with a female XLR input. Confirm that both devices use standard 3-pin XLR wiring and that a 50-foot cable run fits the planned routing path. Avoid sharply kinking the cable, and coil it loosely after use to support reliable long-term handling.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296389190,"sku":"GOLD STAGE-50","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iooTLzcxL_b61c7385-704a-4459-8603-f9cb1fdb035a.jpg?v=1784264312"},{"product_id":"mogami-gold-studio-06-6-xlr-male-to-female-cable","title":"Mogami GOLD STUDIO-06 6' XLR Male to Female Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-06 is a 6-foot analog XLR microphone and balanced audio cable with a 3-pin XLR male connector on one end and a 3-pin XLR female connector on the other. It is designed for linking microphones, audio interfaces, mixers, preamps, powered speakers, and other compatible XLR-equipped equipment. Its short length suits close-range studio, broadcast, and live-sound connections where excess cable is unnecessary.\u003c\/p\u003e\u003cp\u003eThis cable uses Mogami Neglex W2534 Studio Quad cable, a four-conductor design intended to improve rejection of electromagnetic and radio-frequency interference. The quad construction is useful where audio lines pass near power supplies, lighting equipment, wireless devices, or other potential noise sources. It carries balanced analog audio and is also suited to certain unbalanced-equipment connections when properly wired.\u003c\/p\u003e\u003cp\u003eEach conductor uses oxygen-free copper and XLPE insulation, while a served bare-copper shield surrounds the internal conductors. This combination is designed to maintain a low-noise signal path while keeping the cable flexible enough for regular studio routing. The black flexible PVC outer jacket has a 6.0 mm outer diameter.\u003c\/p\u003e\u003cp\u003eBlack-body 3-pin XLR connectors with gold contacts complete the assembly. The connector format provides a standard male-to-female XLR link for common microphone and balanced line-level applications. Gold-plated contacts are used to help maintain dependable connector contact over repeated connections.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-06 is a practical choice for users building a compact recording setup, connecting a vocal microphone to an interface, or wiring balanced gear in a rack or desktop system. It can also serve as part of a larger Mogami Gold Studio cable system when consistent connector types and cable construction are preferred. Mogami covers factory-assembled Gold cable assemblies with its lifetime warranty for the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot XLR Cable:\u003c\/strong\u003e Provides a compact connection length for nearby audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Core:\u003c\/strong\u003e Uses four conductors for enhanced noise-cancellation performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors carry balanced analog audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Cross-linked polyethylene insulates each internal conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Bare-copper spiral shielding helps reduce external interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLR Ends:\u003c\/strong\u003e Black 3-pin XLR connectors provide male-to-female connectivity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-06 combines four 24 AWG oxygen-free copper conductors, XLPE conductor insulation, a served bare-copper shield, and a flexible PVC jacket. Its nominal cable diameter is 6.0 mm, and the assembly is finished in black with black-body, gold-contact XLR connectors. The cable uses blue and clear conductor identification within its quad configuration.\u003c\/p\u003e\u003cp\u003eConnect the XLR female end to a microphone or other device with an XLR male output, then connect the XLR male end to a compatible XLR female input on an interface, mixer, preamp, powered speaker, or other balanced audio device. Confirm that both devices use standard 3-pin XLR connections and route the cable away from AC power cords where practical. This is a single analog XLR-to-XLR cable and does not replace adapters, converters, or additional channels required by the rest of a system.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296979014,"sku":"GOLD STUDIO-06","price":75.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71x_MqznKyL.jpg?v=1784264348"},{"product_id":"mogami-gold-studio-10-10-xlr-microphone-cable","title":"Mogami GOLD STUDIO-10 10' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-10 is a 10-foot balanced XLR microphone cable with one 3-pin XLR female connector and one 3-pin XLR male connector. It is designed to link microphones, mixers, audio interfaces, preamps, and other equipment with compatible XLR connections. Its quad-conductor construction is intended for clean signal transfer in studio, stage, broadcast, and installed audio applications.\u003c\/p\u003e\u003cp\u003eThis cable is suited to recording musicians, engineers, content creators, and live-sound users who need a practical 10-foot connection between nearby components. The length works well for a microphone stand to an interface or mixer, or for short balanced connections within a rack or control-room setup. It is a signal cable rather than a speaker cable and is not intended for amplified speaker-level connections.\u003c\/p\u003e\u003cp\u003eAt its core is Mogami W2534 Neglex Quad cable, using four oxygen-free copper conductors in a quad arrangement. This configuration supports common-mode noise rejection when used in a balanced XLR signal path. The cable also uses a served bare-copper shield to help reduce susceptibility to interference.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-10 uses black-body 3-pin XLR connectors with gold-plated contacts. Gold-plated contacts are used to provide corrosion resistance at the connection points. The flexible PVC jacket and approximately 6 mm outer diameter make the cable suitable for routine routing around studio furniture, microphone stands, and equipment racks.\u003c\/p\u003e\u003cp\u003eUse the GOLD STUDIO-10 where both devices provide standard 3-pin XLR connections and a 10-foot run is appropriate. It can connect a microphone to a mixer or audio interface, or carry balanced line-level audio between compatible XLR-equipped devices. A single cable is included, so stereo or dual-microphone setups require additional cables.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot XLR Cable:\u003c\/strong\u003e Provides a 10-foot connection for nearby audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Uses four conductors for balanced signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2534 Cable:\u003c\/strong\u003e Built with Mogami's 24 AWG quad microphone cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare Copper Shield:\u003c\/strong\u003e Adds shielding around the internal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Helps resist corrosion at the connector contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Ends:\u003c\/strong\u003e Includes one XLR female and one XLR male connector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible PVC outer jacket. Its nominal outside diameter is 6.0 mm, and the finished cable is black with black-body XLR connectors. The contacts are gold-plated, while the internal conductors use blue and clear insulation colors in the quad construction.\u003c\/p\u003e\u003cp\u003eConnect the XLR female end to a microphone or device with a male XLR output, then connect the XLR male end to a compatible female XLR input on a mixer, interface, preamp, or powered audio device. Route the cable away from AC power cords and avoid sharp bends, pinching, or strain at the connector ends. Confirm that both connected devices use standard 3-pin XLR connections before installation.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599297208390,"sku":"GOLD STUDIO-10","price":87.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71x_MqznKyL_8e22bc04-d553-4bfa-992d-b7a8062829db.jpg?v=1784264369"},{"product_id":"mogami-gold-studio-100-100-ft-xlr-microphone-cable","title":"Mogami GOLD STUDIO-100 100 ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-100 is a 100-foot balanced XLR microphone cable designed for studio, broadcast, live-sound, and installed-audio signal paths. It connects an XLR-output source such as a microphone or mixer to an XLR-input device such as a preamp, interface, console, or powered speaker. Its quad-conductor construction is intended to help maintain a clean, low-noise signal over a long cable run.\u003c\/p\u003e\u003cp\u003eThis cable is a practical choice for users working around power supplies, lighting equipment, computers, and other potential sources of electromagnetic or radio-frequency interference. Mogami uses its Neglex W2534 quad microphone cable, which pairs four conductors with a served bare-copper shield. The design is especially suited to balanced analog audio connections where interference rejection and dependable handling matter.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-100 uses a male 3-pin XLR connector at one end and a female 3-pin XLR connector at the other. Both connectors have black bodies and gold-plated contacts for corrosion resistance at the contact points. The 100-foot length supports longer microphone, stage, control-room, and equipment-rack runs without requiring an added extension cable.\u003c\/p\u003e\u003cp\u003eInside, oxygen-free copper conductors use XLPE insulation, while the outer jacket is flexible PVC with a 6 mm overall diameter. The W2534 cable's balanced quad connection has a specified capacitance of 29.6 pF per foot at 1 kHz between conductors. Its compact diameter helps make the cable easier to route through studio furniture, cable pathways, and portable production setups.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-100 fits naturally into systems built around microphones, mic preamps, recording interfaces, mixers, processors, and powered speakers with standard 3-pin XLR connections. It is not a speaker cable, power cable, or digital AES\/EBU cable. Mogami covers the assembled cable with a limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Foot XLR Run:\u003c\/strong\u003e Provides reach for studio, stage, broadcast, and installed-audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors support dependable analog audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce exposure to RF and electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Contacts:\u003c\/strong\u003e Helps resist contact corrosion at the connector interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Conductor Insulation:\u003c\/strong\u003e Supports stable electrical performance and soldering durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-100 is built around Mogami W2534 cable with four 24 AWG oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible black PVC jacket. The cable measures 0.236 inch (6 mm) in outside diameter. It is factory terminated with straight, black-body, 3-pin XLR female and XLR male connectors with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or other XLR-output device, then connect the male XLR end to a compatible XLR input on a preamp, mixer, recorder, interface, processor, or powered speaker. Route the cable away from AC power wiring where practical, avoid sharp bends or pinching, and use appropriate cable management for the 100-foot length. No adapters are included; equipment with non-XLR connections requires a separately selected, correctly wired adapter or interface cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599298388038,"sku":"GOLD STUDIO-100","price":274.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VAtZTpzTL.jpg?v=1784264420"},{"product_id":"mogami-gold-studio-25-25-xlr-microphone-cable","title":"Mogami GOLD STUDIO-25 25' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-25 is a 25-foot balanced XLR microphone cable with a 3-pin XLR male connector on one end and a 3-pin XLR female connector on the other. It is designed for connecting microphones, mic preamps, mixers, interfaces, powered speakers, and other compatible balanced audio equipment. Its quad-conductor construction is intended to help maintain a low-noise signal path in studio, live-sound, broadcast, and home-recording setups.\u003c\/p\u003e\u003cp\u003eThis cable is a practical choice for users working around power supplies, lighting, computers, wireless equipment, and other potential sources of electromagnetic or radio-frequency interference. Mogami uses its W2534 Neglex Quad cable design, which combines four 24 AWG conductors with a served bare-copper shield. The result is a flexible XLR cable built for balanced audio runs where noise rejection is important.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-25 uses oxygen-free copper conductors and XLPE insulation. This construction supports stable electrical characteristics while keeping the cable at a compact 0.236-inch outer diameter. The black PVC jacket is suited to regular routing between studio equipment, microphones, patch points, and stage positions.\u003c\/p\u003e\u003cp\u003eGold-plated connector contacts are used to support corrosion resistance at the connection points, while the XLR connectors use black bodies for a professional appearance. The cable carries a 25-foot, or 7.6-meter, length that gives useful reach for vocal booths, tracking rooms, podcast spaces, rehearsal rooms, and portable live rigs. It is a signal cable only and does not replace speaker cable or an instrument cable where those connection types are required.\u003c\/p\u003e\u003cp\u003eFor an audio system upgrade, the GOLD STUDIO-25 can be used wherever a standard balanced XLR male-to-female connection is needed. It pairs naturally with XLR-output microphones and XLR-input audio interfaces, mixers, preamps, processors, and powered speakers. Mogami includes a lifetime warranty with this cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot XLR Run:\u003c\/strong\u003e Provides 25 feet of reach for microphone and balanced line-level connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Uses four conductors to support improved common-mode noise rejection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors carry balanced audio signals through the cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare Copper Served Shield:\u003c\/strong\u003e Adds shielding against electromagnetic and radio-frequency interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Contacts:\u003c\/strong\u003e Helps resist corrosion at the connector contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Cross-linked polyethylene insulation supports the cable's electrical and mechanical design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-25 is built around Mogami W2534 quad microphone cable with four 24 AWG oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible black PVC jacket. Its cable diameter is 0.236 inch, helping it fit cleanly into studio and stage cable runs. Black-body 3-pin XLR connectors with gold-plated contacts complete the assembly.\u003c\/p\u003e\u003cp\u003eConnect the XLR female end to a microphone or another device with a male XLR output, then connect the XLR male end to a mixer, interface, preamp, powered speaker, or other device with a female XLR input. Use it for balanced microphone or line-level connections; confirm that both devices use standard 3-pin XLR wiring before installation. Route the cable away from AC power cables where practical and avoid sharp bends, pinching, or strain on the connector ends.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599298551878,"sku":"GOLD STUDIO-25","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61AnSRh4MoL.jpg?v=1784264442"},{"product_id":"mogami-gold-studio-50-50-xlr-microphone-cable","title":"Mogami GOLD STUDIO-50 50' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-50 is a 50-foot balanced XLR microphone cable built for dependable signal connections in studio, broadcast, live sound, and home-recording systems. It connects equipment with a 3-pin XLR male output to equipment with a 3-pin XLR female input. Its quad-conductor construction is designed to help reduce unwanted noise on longer runs where power, lighting, wireless devices, or other electronics may be nearby.\u003c\/p\u003e\u003cp\u003eThis cable is a practical choice for microphones, audio interfaces, mixers, preamps, powered monitors, and other XLR-equipped pro-audio components. The 50-foot length provides useful reach between a recording space and control position, across a stage, or through a larger room. It is intended for balanced audio connections and can also be useful in systems where grounding or wiring conditions make noise control important.\u003c\/p\u003e\u003cp\u003eAt its core is Mogami W2534 Neglex Quad cable, using four 24 AWG oxygen-free copper conductors. The quad geometry increases common-mode noise rejection compared with conventional two-conductor balanced cable designs. Combined with the cable's bare copper served shield, it supports a low-noise signal path for microphone and line-level audio applications.\u003c\/p\u003e\u003cp\u003eXLPE conductor insulation and a flexible PVC outer jacket support a compact 0.236-inch cable diameter. The black jacket is easy to route through studio furniture, racks, stands, and cable-management paths without the bulk of a larger mic cable. Gold-plated XLR contacts are used to help resist corrosion at the connection points.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-50 fits naturally into a system upgrade where dependable balanced wiring is needed between existing XLR-equipped components. It does not add features or processing; it provides a properly shielded physical link between compatible audio devices. For installations requiring a 50-foot XLR male-to-female run, it offers a single-cable solution with a limited lifetime manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot XLR Run:\u003c\/strong\u003e Provides reach for studio, stage, broadcast, and home-audio routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Uses four conductors to help reduce induced noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors carry balanced audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare Copper Shield:\u003c\/strong\u003e Served shield helps guard against RF and electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Helps resist corrosion at the XLR connection points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Lifetime Warranty:\u003c\/strong\u003e Backed by Mogami's limited lifetime manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-50 combines a black flexible PVC jacket with XLPE insulation, four internal conductors, and a served bare copper shield. Its finished cable diameter is 0.236 inch, making it suitable where a smaller-diameter quad microphone cable is preferred. Black-body 3-pin XLR connectors and gold-plated contacts complete the assembly.\u003c\/p\u003e\u003cp\u003eConnect the XLR male end to a compatible female XLR output and the XLR female end to a compatible male XLR input. Route the cable away from AC power cords, power supplies, and lighting-control wiring when practical, and leave enough slack to avoid stress at either connector. No adapters, mounting hardware, or additional accessories are included with the cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599298977862,"sku":"GOLD STUDIO-50","price":186.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71x_MqznKyL_613df248-4835-456c-95e2-df528ddd3dcb.jpg?v=1784264463"},{"product_id":"mogami-gold-studio-75-75-ft-xlr-microphone-cable","title":"Mogami GOLD STUDIO-75 75 ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-75 is a 75-foot balanced XLR microphone cable designed for connecting microphones, mixers, preamps, interfaces, processors, and other professional audio equipment with standard 3-pin XLR connections. Its long reach suits studio rooms, stage setups, broadcast work, and installed audio paths where equipment cannot be positioned close together. The cable uses a male XLR connector on one end and a female XLR connector on the other.\u003c\/p\u003e\u003cp\u003eThis cable is intended for users who need dependable signal transfer in environments where electromagnetic or radio-frequency interference can be a concern. Its four-conductor Neglex Quad construction helps reject induced noise that may be picked up around lighting, power equipment, computers, or other electronic devices. It is appropriate for balanced microphone and line-level audio connections.\u003c\/p\u003e\u003cp\u003eMogami builds the GOLD STUDIO-75 around its W2534 Neglex Quad microphone cable, using 24 AWG oxygen-free copper conductors and a served bare-copper shield. The balanced quad layout is engineered to help cancel electromagnetic induction while maintaining a low-noise signal path. This makes it a practical choice for recording, live sound, and equipment interconnect applications.\u003c\/p\u003e\u003cp\u003eThe cable has a black flexible PVC jacket with a 0.236-inch outside diameter, providing a compact profile for a quad-conductor microphone cable. XLPE conductor insulation supports stable electrical characteristics and helps prevent shrink-back during soldering. Black-body XLR connectors with gold-plated contacts complete the assembly.\u003c\/p\u003e\u003cp\u003eUse the GOLD STUDIO-75 where a single long XLR run is needed between compatible audio components. It can serve as a microphone lead, a balanced connection between rack equipment, or a studio line cable where noise rejection is important. The cable is supplied as a finished 75-foot assembly and is covered by Mogami's limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Foot XLR Run:\u003c\/strong\u003e Provides extended reach for studio, stage, and installed audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Four-conductor W2534 cable helps reduce induced electromagnetic noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Uses oxygen-free copper conductors for balanced audio signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Adds shielding against RF and electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Helps resist contact corrosion at the XLR terminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Provides stable electrical properties and soldering heat resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-75 uses a flexible black PVC outer jacket over Mogami W2534 quad microphone cable. Its internal construction includes four 24 AWG OFC conductors, XLPE insulation, and a served bare-copper shield. The finished cable is terminated with black-body, 3-pin XLR male and female connectors with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or device with a male XLR output, and connect the male XLR end to a mixer, interface, preamp, powered speaker, or other device with a female XLR input. Confirm that both devices use standard 3-pin XLR connections before installation. Route the cable away from power wiring where possible and use appropriate cable management or floor protection for long runs.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299141702,"sku":"GOLD STUDIO-75","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VAtZTpzTL_5826bcb1-b59c-4909-a4a1-3337af72c3d5.jpg?v=1784264483"},{"product_id":"mogami-gold-trs-trs-06-6-ft-balanced-trs-audio-cable","title":"Mogami GOLD TRS-TRS-06 6 ft Balanced TRS Audio Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-TRS-06 is a 6-foot balanced audio interconnect with 1\/4-inch TRS male connectors at both ends. It is intended for routing balanced line-level audio between compatible equipment, including audio interfaces, mixers, patch points, and powered speakers. Its short length is practical for nearby components in studio, stage, broadcast, or desktop audio systems.\u003c\/p\u003e\u003cp\u003eThis cable is designed for users who need a dependable balanced connection where electrical noise can be a concern. Balanced TRS wiring helps compatible source and destination equipment reject common-mode noise along the signal path. It is appropriate for recording, monitoring, live-sound, and equipment-rack interconnect applications.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-TRS-06 uses Mogami W2534 Neglex Studio Quad cable, a four-conductor design with an overall served bare-copper shield. The quad conductor geometry is designed to improve rejection of electromagnetic and radio-frequency interference compared with conventional two-conductor cable designs. This makes it well suited to installations near power supplies, lighting, computers, and other potential noise sources.\u003c\/p\u003e\u003cp\u003eEach end is fitted with a straight 1\/4-inch TRS male connector with gold-plated contacts and a black body. The flexible PVC outer jacket helps the cable route cleanly between adjacent equipment while protecting the internal conductors. Cross-linked polyethylene conductor insulation is used in the cable construction.\u003c\/p\u003e\u003cp\u003eUse this cable when both devices provide compatible 1\/4-inch balanced TRS connections. It is an interconnect cable rather than a speaker cable, so it is not intended to carry amplified speaker output to passive loudspeakers. The 6-foot length can be used as a direct connection within a compact signal chain without leaving excessive slack.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS Connectivity:\u003c\/strong\u003e Connects compatible 1\/4-inch balanced line-level equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Foot Length:\u003c\/strong\u003e Provides 6 feet of reach for nearby gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Studio Quad Cable:\u003c\/strong\u003e Uses four conductors for noise-rejection performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Adds an overall shield against external interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Uses gold-plated contacts on both straight TRS connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PVC Jacket:\u003c\/strong\u003e Supports practical routing in studio and live-audio setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable is built around Mogami W2534 quad cable with 24 AWG oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible black PVC jacket. Its cable diameter is approximately 6.0 mm, while the straight black-body connectors use gold-plated contacts. The assembly is shielded and uses the same connector type on each end.\u003c\/p\u003e\u003cp\u003eConnect one TRS plug to a balanced 1\/4-inch line output and the other to a balanced 1\/4-inch line input, such as an interface-to-monitor or mixer-to-powered-speaker connection. Verify that both devices use 1\/4-inch TRS balanced analog connections; adapters may be needed for XLR, RCA, 3.5 mm, or other connector formats. Do not use this cable between a power amplifier's speaker outputs and passive speakers.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299305542,"sku":"GOLD TRS-TRS-06","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61DgPndM6LL.jpg?v=1784264500"},{"product_id":"mogami-gold-trs-trs-20-20-ft-balanced-trs-cable","title":"Mogami GOLD TRS-TRS-20 20 Ft Balanced TRS Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-TRS-20 is a 20-foot balanced audio interconnect with 1\/4-inch TRS male connectors at both ends. It is designed to carry line-level audio between compatible balanced equipment while helping reduce the hum and interference that can occur in electrically busy studio or live-sound setups. It is a practical choice for connecting audio interfaces, mixers, patch bays, outboard processors, powered speakers, and similar gear.\u003c\/p\u003e\u003cp\u003eThis cable uses Mogami Neglex Studio Quad W2534 cable, a four-conductor design intended for balanced analog signal paths. Its construction supports clear signal transfer with strong rejection of electromagnetic and radio-frequency interference. The cable is suited to recording, broadcast, rehearsal, performance, and installed audio applications where a balanced 1\/4-inch connection is available.\u003c\/p\u003e\u003cp\u003eEach end is fitted with a straight 1\/4-inch TRS male connector with gold-plated contacts and a black connector body. The TRS format supports balanced mono line-level connections when used with appropriately wired equipment. It is not an adapter cable and does not change connector formats or convert balanced and unbalanced signal types.\u003c\/p\u003e\u003cp\u003eA served bare-copper spiral shield surrounds the internal conductors, while the flexible PVC outer jacket helps protect the cable during routine handling and routing. The W2534 cable construction uses oxygen-free copper conductors and cross-linked polyethylene insulation. Its approximately 6 mm outer diameter provides a substantial yet manageable cable profile for studio and stage runs.\u003c\/p\u003e\u003cp\u003eThe 20-foot length is useful when equipment is separated by a console, rack, desktop, speaker stand, or stage position. Use it between two devices with 1\/4-inch TRS balanced input and output connections for the intended signal path. For systems using XLR, RCA, TS, 3.5 mm, or speaker-level connections, select the correct cable or adapter for those connections instead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides reach for studio, stage, and powered-speaker connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS Ends:\u003c\/strong\u003e Connects compatible 1\/4-inch balanced line-level equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Studio Quad:\u003c\/strong\u003e Uses Mogami W2534 four-conductor cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce externally induced noise and interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides durable connector contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC Outer Jacket:\u003c\/strong\u003e Adds flexible protection for regular cable routing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-TRS-20 combines 24 AWG oxygen-free copper conductors, cross-linked polyethylene insulation, a served bare-copper shield, and a black PVC jacket. Its straight TRS connectors use black bodies and gold-plated contacts. The cable is built around Mogami W2534 Neglex Studio Quad bulk cable.\u003c\/p\u003e\u003cp\u003eConnect one TRS plug to a balanced 1\/4-inch line output and the other to a balanced 1\/4-inch line input, such as an interface-to-monitor controller, mixer-to-powered speaker, or processor-to-mixer connection. Route the cable away from AC power cords and power supplies when possible, and avoid sharply bending or crushing it. This package includes one 20-foot TRS-to-TRS cable; additional cables are needed for separate left and right stereo channels when each channel uses its own balanced output.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299469382,"sku":"GOLD TRS-TRS-20","price":119.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61DgPndM6LL_93535ae2-6a3c-447c-986b-c18882ff587e.jpg?v=1784264518"},{"product_id":"mogami-gold-trs-trs-30-30-ft-balanced-trs-cable","title":"Mogami GOLD TRS-TRS-30 30 Ft Balanced TRS Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-TRS-30 is a 30-foot balanced audio interconnect with 1\/4-inch TRS male connectors at both ends. It is designed to carry line-level balanced signals between compatible studio, live-sound, and playback components. The long reach supports installations where equipment cannot be placed close together.\u003c\/p\u003e\u003cp\u003eThis cable is suited to connecting balanced outputs and inputs on audio interfaces, mixers, soundboards, outboard processors, and powered speakers. Its 1\/4-inch TRS connectors are intended for equipment that uses balanced TRS line connections. It is not a speaker wire and is not a direct substitute for RCA, XLR, or 3.5 mm connections without appropriate adapters.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2534 Neglex Studio Quad cable, a four-conductor oxygen-free copper design. The quad construction and served bare-copper shield help reduce susceptibility to electromagnetic and radio-frequency interference. This makes the cable particularly practical for longer balanced runs near power equipment, lighting, or other potential noise sources.\u003c\/p\u003e\u003cp\u003eGold-plated contacts and black-bodied straight TRS plugs provide the physical connection at each end. The cable uses XLPE conductor insulation and a flexible PVC outer jacket for regular routing and handling. Its approximately 6.0 mm outer diameter balances durability with manageable cable routing.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-TRS-30 as a balanced line-level link in a recording, podcast, PA, or powered-monitor system. It can connect a balanced 1\/4-inch line output to a matching balanced 1\/4-inch input when the equipment supports that signal format. A limited lifetime manufacturer warranty is included with the cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot Length:\u003c\/strong\u003e Provides reach for more flexible equipment placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS Ends:\u003c\/strong\u003e Connects compatible 1\/4-inch balanced line-level gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2534 Neglex Quad:\u003c\/strong\u003e Uses four-conductor Mogami Studio Quad cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Conductors:\u003c\/strong\u003e Uses 24 AWG oxygen-free copper conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce external noise pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines four 24 AWG OFC conductors, XLPE insulation, a served bare-copper shield, and a flexible PVC jacket. Both ends terminate in straight 1\/4-inch TRS male plugs with black bodies and gold-plated contacts. The W2534 cable stock has an approximately 6.0 mm outer diameter.\u003c\/p\u003e\u003cp\u003eFor installation, connect each end to a compatible 1\/4-inch TRS balanced line-level jack, such as an interface output and powered-speaker input or a mixer and processor connection. Route the cable away from AC power cords, transformers, and high-current wiring where practical. If either device uses XLR, RCA, 3.5 mm, or another connector type, a correctly wired adapter or different cable is required.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299633222,"sku":"GOLD TRS-TRS-30","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61W1XFfYjHL.jpg?v=1784264537"},{"product_id":"mogami-gold-trs-xlrf-15-15-trs-to-xlr-female-cable","title":"Mogami GOLD TRS-XLRF-15 15' TRS-to-XLR Female Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRF-15 is a 15-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR female connector on the other. It is designed for balanced analog connections between compatible studio, stage, and powered audio equipment. Its connector combination helps bridge equipment that uses 1\/4-inch balanced line connections and XLR connections.\u003c\/p\u003e\u003cp\u003eThis cable is intended for musicians, engineers, content creators, and system installers who need a longer balanced interconnect with specific TRS-to-XLRF termination. The 15-foot length provides useful reach for equipment racks, mixers, interfaces, patching setups, and other installations where short cables are not sufficient. Confirm the connector gender and signal requirements of both devices before purchase.\u003c\/p\u003e\u003cp\u003eMogami wires this assembly with Neglex W2534 quad microphone cable, a four-conductor design used for balanced audio applications. The quad construction and served copper shield are engineered to reduce susceptibility to electromagnetic and radio-frequency interference. This makes the cable suitable for runs near power supplies, lighting equipment, and other potential noise sources.\u003c\/p\u003e\u003cp\u003eThe cable uses oxygen-free copper conductors, cross-linked polyethylene insulation, and a flexible PVC outer jacket. Gold-plated connector contacts and black connector bodies complete the assembly. The result is a durable, shielded cable intended for repeated professional audio use.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-XLRF-15 where a balanced 1\/4-inch TRS output or connection needs to mate with a male XLR connector. It can serve as part of a studio patching system, recording setup, or compatible powered-speaker accessory connection. It is a signal cable only and does not provide power, amplification, or audio conversion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-XLRF Termination:\u003c\/strong\u003e Connects a 1\/4-inch TRS female jack to a male XLR connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Foot Length:\u003c\/strong\u003e Provides added reach for equipment and patching layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce interference entering the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRF-15 uses Mogami W2534 Neglex Quad cable with oxygen-free copper conductors, cross-linked polyethylene insulation, a served bare-copper shield, and a flexible PVC jacket. The cable has a nominal 6.0 mm outer diameter and black exterior. Its black-body connectors use gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the XLR female end to a compatible 3-pin XLR male connector. This is a single-channel analog interconnect, not a speaker-power cable or a digital adapter. Route it away from AC power wiring where practical, and verify that both connected devices are designed for the intended balanced line-level connection.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300583494,"sku":"GOLD TRS-XLRF-15","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61B0dsn61xL.jpg?v=1784264554"},{"product_id":"mogami-gold-trs-xlrf-20-20-ft-trs-to-xlrf-cable","title":"Mogami GOLD TRS-XLRF-20 20-Ft TRS to XLRF Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRF-20 is a 20-foot balanced audio cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR female connector on the other. It is designed to bridge compatible balanced connections in studio, live-sound, recording-interface, and powered-speaker setups. The extended length helps place equipment farther apart while maintaining a single continuous balanced connection.\u003c\/p\u003e\u003cp\u003eThis cable is suited to users connecting gear with a balanced 1\/4-inch TRS output or input to equipment using a female XLR connection. Its connector arrangement is useful for compatible line-level audio paths, including certain mixers, processors, interfaces, monitors, and powered speakers. Verify both devices' connector gender, signal direction, and signal level before purchase.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex W2534 Studio Quad cable, a four-conductor design intended for balanced analog audio. The quad conductor geometry and spiral bare-copper shield are designed to help reduce susceptibility to electromagnetic and radio-frequency interference. This makes it a practical choice for installations where cable runs pass near power supplies, lighting, or other electronic equipment.\u003c\/p\u003e\u003cp\u003eThe cable uses XLPE conductor insulation and flexible PVC jacketing around the internal cable structure. Gold-plated connector contacts support dependable contact surfaces, while the black-bodied 1\/4-inch TRS and XLR connectors provide clear, professional-style terminations. The finished cable is shielded and uses 24 AWG conductors.\u003c\/p\u003e\u003cp\u003eAs part of a system upgrade, the GOLD TRS-XLRF-20 can replace a shorter cable or add reach between compatible balanced components. It is a single-channel cable, not a speaker cable, stereo breakout cable, or TRS-to-dual-XLR adapter. Mogami includes a lifetime warranty with this Gold-series cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides added reach for studio, stage, and equipment-rack connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRF Wiring:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and female XLR audio interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses a four-conductor cable construction for balanced audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Provides stranded oxygen-free copper conductors in the cable assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps protect the audio path from external electrical interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides gold-plated connector contact surfaces at both cable ends.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRF-20 uses black connector bodies, gold-plated contacts, flexible PVC jacketing, XLPE conductor insulation, and a served bare-copper shield. Its W2534-based quad construction contains four 24 AWG oxygen-free copper conductors and has a nominal 6.0 mm outer cable diameter. The cable is black and supplied as a finished, shielded audio interconnect.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the 3-pin female XLR end to a matching male XLR connector. Route the cable away from AC power cables and avoid tight bends, pinching, or strain on the connectors. Confirm that your equipment supports the required balanced wiring and appropriate signal level; this cable does not convert line level to microphone level or change connector gender beyond its fixed TRS-male-to-XLR-female format.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300747334,"sku":"GOLD TRS-XLRF-20","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61B0dsn61xL_58bea519-36dd-435d-af86-f3dca186ec4f.jpg?v=1784264572"},{"product_id":"mogami-gold-trs-xlrm-03-3-trs-to-xlr-male-cable","title":"Mogami GOLD TRS-XLRM-03 3' TRS To XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-03 is a 3-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It provides a direct physical connection between equipment using these two connector formats. Its short length is useful where nearby components need a tidy, purpose-built interconnect.\u003c\/p\u003e\u003cp\u003eThis cable is intended for balanced audio signal routing in studio, live-sound, broadcast, and powered-speaker setups. It is suited to users connecting compatible TRS and female XLR ports without relying on separate adapters. Confirm both the connector gender and the signal requirements of the equipment before installation.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-XLRM-03 uses Mogami Neglex Studio Quad 2534 cable, a four-conductor design made for balanced audio applications. Its quad construction and served bare-copper shield are designed to help reduce susceptibility to electromagnetic and radio-frequency interference. This makes it a practical choice for signal paths installed near power supplies, lighting equipment, or other electronics.\u003c\/p\u003e\u003cp\u003eEach end uses a black-body connector with gold-plated contacts. The cable uses 24 AWG oxygen-free copper conductors with XLPE insulation and a flexible PVC jacket. These materials support a compact, shielded cable assembly for routine professional audio use.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-XLRM-03 where a 3-foot run is sufficient between compatible balanced TRS and XLR equipment. It can serve as part of an interface, mixer, processor, monitor, or patching setup where a male XLR termination is required. The included cable is backed by a limited lifetime manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRM Connection:\u003c\/strong\u003e Links a 1\/4-inch TRS male plug to a 3-pin XLR male plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot Length:\u003c\/strong\u003e Supports short, organized equipment-to-equipment audio runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex 2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Uses oxygen-free copper conductors in the cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Adds shielding against electromagnetic and radio-frequency interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines a flexible black PVC jacket, XLPE conductor insulation, oxygen-free copper conductors, and a served bare-copper shield. Its black-body 1\/4-inch TRS and 3-pin XLR male connectors use gold-plated contacts. The cable assembly is shielded and uses Mogami Neglex Studio Quad 2534 construction.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible TRS jack and the XLR male end to a compatible female XLR jack. The cable is 3 feet long, so it is best used between nearby components rather than across a room or vehicle. Check connector gender, port type, and the equipment's signal-level requirements before connecting devices.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300911174,"sku":"GOLD TRS-XLRM-03","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL.jpg?v=1784264589"},{"product_id":"mogami-gold-trs-xlrm-10-10-trs-to-xlr-male-cable","title":"Mogami GOLD TRS-XLRM-10 10' TRS to XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-10 is a 10-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It is intended for balanced analog signal routing where equipment uses different connector formats. The cable provides a direct connection without relying on separate adapters.\u003c\/p\u003e\u003cp\u003eThis cable is suited to studio, live-sound, broadcast, and powered-speaker setups with compatible balanced TRS and XLR connections. It can be used to link gear such as mixers, audio interfaces, patch bays, signal processors, and monitor systems. Both ends are male, so the connected equipment must provide matching female inputs or outputs.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex Quad 2534 cable, a four-conductor design used for balanced audio applications. Its quad construction and served copper shield are designed to help reduce the pickup of electromagnetic interference around audio equipment. This makes it a practical choice for organized signal routing in electrically busy setups.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used at the TRS and XLR terminations, while the connectors use black bodies. The cable has a flexible PVC outer jacket and a nominal 6.0 mm outside diameter. Its 24 AWG oxygen-free-copper conductors balance compact handling with professional audio-cable construction.\u003c\/p\u003e\u003cp\u003eThe 10-foot length is useful when components are separated by a rack, desk, speaker stand, or console position. It is a single-channel cable rather than a stereo pair or multi-channel snake. Use it where the destination and source are designed for compatible balanced TRS-to-XLR signal wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRM Wiring:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and XLR female ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides added reach for studio and system routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad 2534 Cable:\u003c\/strong\u003e Uses four conductors for balanced analog audio cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Provides stranded oxygen-free-copper signal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Helps limit interference pickup in demanding installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold-plated connector contacts complete both cable ends.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRM-10 uses Mogami Neglex Quad 2534 cable with XLPE conductor insulation, a served shield, and a flexible PVC jacket. The finished cable is black and has black-body connectors with gold-plated contacts. Its nominal cable outside diameter is 6.0 mm.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male plug to a compatible female balanced TRS jack and the XLR male end to a compatible female XLR connector. Confirm that the source, destination, signal level, and balanced wiring are appropriate for the equipment before installation. Route the cable away from power wiring where practical and avoid sharply bending or crushing the cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301009478,"sku":"GOLD TRS-XLRM-10","price":95.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL_7ab87d2c-7389-405a-a9e3-aa47cb55779f.jpg?v=1784264603"},{"product_id":"mogami-gold-trs-xlrm-20-20-trs-to-xlrm-patch-cable","title":"Mogami GOLD TRS-XLRM-20 20' TRS-to-XLRM Patch Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-20 is a 20-foot balanced patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It is designed to link compatible balanced audio equipment that uses these two connector formats. The extended length is useful when equipment needs to be positioned farther apart without adding couplers or extensions.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio, recording, live-sound, and powered-speaker setups using balanced line connections. It can help simplify connections between compatible mixers, interfaces, processors, monitor controllers, powered speakers, and other professional audio equipment. Connector type, signal level, and pinout should be verified on both devices before use.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex W2534 Quad high-definition microphone cable. Its four-conductor quad construction and served copper shield are designed to support balanced signal transmission in environments where electromagnetic or radio-frequency interference may be present. The cable uses oxygen-free copper conductors and a flexible PVC outer jacket.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used at both the 1\/4-inch TRS and XLR male terminations. The black-body, straight connectors provide a conventional, practical format for patching compatible gear. XLPE conductor insulation is used within the W2534 cable construction.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-XLRM-20 fits into systems that need a direct balanced TRS-to-XLR male cable rather than an adapter plus a separate cable. Its 20-foot reach supports organized routing between racks, workstations, stage equipment, and powered speakers. Mogami includes a lifetime warranty with this Gold-series cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-XLRM Terminations:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and 3-pin XLR male interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides extended reach for equipment placement and cable routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Quad Construction:\u003c\/strong\u003e Uses four conductors for balanced audio signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Cable:\u003c\/strong\u003e Uses Mogami's quad high-definition microphone cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold contact plating is used at both connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Served bare-copper shielding supports noise-resistant cable construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRM-20 uses flexible PVC jacketing around W2534 Neglex Quad cable, with XLPE conductor insulation and a served bare-copper shield. Its four 24 AWG oxygen-free copper conductors are arranged in a quad configuration. Both ends use straight, black-body connectors with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eUse this cable only where a balanced 1\/4-inch TRS male connection and a 3-pin XLR male connection are appropriate for the connected equipment. Route the cable away from AC power cords, power supplies, and areas where it may be pinched or repeatedly stressed. Do not use it as a speaker cable for passive speakers, and confirm the required connector gender and signal level before purchase.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301238854,"sku":"GOLD TRS-XLRM-20","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL_f9b4d62c-1a5c-4020-b43f-ae8a9d3a70a6.jpg?v=1784264623"},{"product_id":"mogami-gold-db25-xlrf-05-8-channel-db25-to-xlrf-cable","title":"Mogami GOLD-DB25-XLRF-05 8-Channel DB25 to XLRF Cable","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRF-05 is a 5-foot analog breakout snake that routes eight channels between a DB25-equipped recording interface or patchbay and eight female XLR connections. It consolidates multiple balanced analog paths into one organized cable run. This makes it useful where equipment uses the common analog DB25 interface format.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio systems, recording interfaces, consoles, outboard gear, and patchbay installations that need eight analog channels at once. Its DB25 male connector uses locking thumb screws, while the fanout terminates in eight 3-pin female XLR connectors. Confirm both the connector gender and the analog DB25 pinout of the connected equipment before ordering.\u003c\/p\u003e\u003cp\u003eBuilt with Mogami W2932 eight-channel multicore cable, this assembly uses individually shielded pairs to support orderly multichannel analog signal routing. The cable construction includes XLPE insulation, a spiral shield, and drain wire for each channel. These features are designed for controlled studio wiring where cable organization and signal isolation matter.\u003c\/p\u003e\u003cp\u003eGold-contact XLR female connectors and a metal DB25 shell provide durable connection points for repeated studio use. The DB25 connector includes extended metal thumb screws for hand-tightened installation. A Techflex-protected fanout helps protect the individual XLR tails where the main cable separates into separate channels.\u003c\/p\u003e\u003cp\u003eThe 5-foot length is suited to short runs between adjacent rack equipment, patchbays, and console I\/O. It can carry eight analog channels in either direction, depending on the connected equipment and signal flow. It is a cable assembly only and does not add inputs, outputs, amplification, or audio conversion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Routes eight balanced analog signal paths through one DB25-to-XLR fanout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDB25-to-XLR Female Format:\u003c\/strong\u003e Provides one locking DB25 male connector and eight 3-pin female XLR connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Foot Length:\u003c\/strong\u003e Fits short equipment-to-patchbay or rack-to-rack cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2932 Cable:\u003c\/strong\u003e Uses an eight-channel multicore cable with individually shielded pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLRs:\u003c\/strong\u003e Uses gold-contact female XLR connectors for the fanout ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal DB25 Hardware:\u003c\/strong\u003e Includes a rugged metal D-sub shell and hand-grip thumb screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses Mogami W2932 multicore snake cable with 26 AWG conductors, XLPE insulation, flexible PVC jacketing, drain wires, and served spiral shielding. Its main cable section has an approximately 11.5 mm outer diameter, while the individual fanout channels are protected with a braided Techflex sleeve. The black finish and numbered channel identification support tidy studio cable management.\u003c\/p\u003e\u003cp\u003eConnect the locking DB25 male end to equipment with a compatible analog DB25 port, then connect the eight female XLR ends to corresponding male XLR connections. Tighten the DB25 thumb screws by hand and avoid placing strain on the fanout transition. This cable is wired to the industry-standard analog DB25 pinout, but the connected equipment should be checked for pinout compatibility before installation.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301435462,"sku":"GOLD-DB25-XLRF-05","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61W42Og1mkL.jpg?v=1784264641"},{"product_id":"mogami-gold-db25-xlrf-10-8-channel-db25-to-xlr-female-cable","title":"Mogami GOLD-DB25-XLRF-10 8-Channel DB25 to XLR Female Cable","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRF-10 is a 10-foot, 8-channel analog breakout cable for studio recording interfaces, consoles, and patchbays with a DB25 analog connection. It terminates in one lockable male DB25 connector and eight 3-pin female XLR connectors. This model is intended to organize multiple balanced analog audio paths in one cable assembly.\u003c\/p\u003e\u003cp\u003eIt is a practical choice for connecting a DB25-equipped interface or patchbay to equipment fitted with male XLR outputs. The eight-channel fan-out avoids using eight separate cables and keeps related channels grouped together. Its industry-standard analog DB25 wiring is intended for compatible multichannel analog equipment.\u003c\/p\u003e\u003cp\u003eThe cable uses individually twisted, shielded pairs to carry each channel separately. Each pair includes a drain wire and spiral bare-copper shield, helping support orderly analog signal routing in studio and live-recording setups. Numbered and color-coded conductors make individual channels easier to identify during installation or service.\u003c\/p\u003e\u003cp\u003eMogami's W2932 multicore construction uses XLPE insulation and a flexible PVC outer jacket. The compact 8-channel cable measures approximately 0.453 inches in overall diameter, supporting routing behind racks, through furniture openings, or between nearby equipment. Metal DB25 hardware with thumb screws provides a secured connection at the interface end.\u003c\/p\u003e\u003cp\u003eUse the GOLD-DB25-XLRF-10 where a DB25 analog output or input needs to break out to eight female XLR connections over a 10-foot run. It fits well in systems built around multichannel converters, recording interfaces, analog consoles, and patchbays. Confirm both the connector genders and the DB25 analog pinout of the connected equipment before ordering.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Routes eight analog audio channels through one DB25 breakout cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDB25 to XLR Female:\u003c\/strong\u003e Connects one male DB25 plug to eight female XLR connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides a 10-foot, or 3-meter, equipment-to-equipment cable run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Pairs:\u003c\/strong\u003e Separates channels with twisted pairs, drain wires, and spiral shields.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Uses cross-linked polyethylene insulation for dimensional stability during termination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal DB25 Shell:\u003c\/strong\u003e Includes a metal D-sub shell and easy-grip thumb screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe assembly uses Mogami W2932 8-channel multicore cable with a flexible PVC jacket, individually shielded pairs, XLPE insulation, and printed channel identification. The DB25 end uses a rugged metal shell with threaded thumb screws, while the breakout end provides eight 3-pin female XLR connectors. The cable is specified for operation from -20°C to +70°C (-4°F to +158°F).\u003c\/p\u003e\u003cp\u003eConnect the DB25 plug to a compatible analog DB25 port and secure it with its thumb screws; connect each labeled female XLR to the corresponding male XLR output. Route the fan-out legs so channel labels remain visible and avoid sharply bending or pinching the cable. This cable does not convert digital audio, change connector gender, or add audio channels beyond those supplied by the connected DB25-equipped device.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301599302,"sku":"GOLD-DB25-XLRF-10","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61W42Og1mkL_95a30abc-9fcd-46b0-b6b2-628c5ceaa23f.jpg?v=1784264659"},{"product_id":"mogami-gold-db25-xlrm-05-8-channel-db25-to-xlrm-snake","title":"Mogami GOLD-DB25-XLRM-05 8-Channel DB25 to XLRM Snake","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRM-05 is a 5-foot, eight-channel analog interface snake with one DB25 male connector and eight XLR male fan-out connectors. It is designed for linking equipment that uses an industry-standard analog DB25 interface to balanced XLR connections. This configuration is useful for patch bays, recording interfaces, consoles, converters, and outboard equipment.\u003c\/p\u003e\u003cp\u003eEach channel uses individually twisted and shielded conductors to help maintain separation between channels in a compact multicore cable. The cable's low-capacitance construction and copper shielding are intended for clean balanced analog signal routing. It provides an organized alternative to running eight separate XLR cables between compatible devices.\u003c\/p\u003e\u003cp\u003eThe DB25 end uses a rugged all-metal D-sub shell with precision pin termination and extended metal thumb screws. These screws provide a secure connection while allowing hand-tightened installation and removal. The XLR male fan-out connectors use gold contacts and are protected with Techflex braided sleeving.\u003c\/p\u003e\u003cp\u003eChannel identification is simplified with individually numbered jackets at the fan-out end. This makes it easier to trace corresponding channels during installation, troubleshooting, and equipment changes. The eight-channel layout is especially practical where rack-mounted interfaces and patch bays concentrate multiple balanced analog lines in a small space.\u003c\/p\u003e\u003cp\u003eThis cable is wired to the industry-standard analog DB25 pinout and is intended for compatible analog equipment. It is a passive connection cable and does not add microphone preamps, conversion, processing, or amplification. Confirm the pinout and connector gender of the equipment being connected before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Routes up to eight balanced analog channels through one DB25-to-XLRM assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry-Standard Analog Pinout:\u003c\/strong\u003e Supports analog devices using the common DB25 audio wiring format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLRM Connectors:\u003c\/strong\u003e Provides eight male XLR fan-out terminations for compatible balanced connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Channel Shielding:\u003c\/strong\u003e Twisted, shielded pairs help reduce interference and channel-to-channel interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal D-Sub Shell:\u003c\/strong\u003e The DB25 connector uses a durable metal shell for physical protection and shielding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumbered Techflex Fan-Outs:\u003c\/strong\u003e Individually numbered, braided-protected channels aid routing and identification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-DB25-XLRM-05 combines OFC conductors, XLPE insulation, a PVC outer jacket, individually shielded pairs, and a bare-copper served spiral shield. Its DB25 connector has an all-metal shell, while the eight XLR male connectors use gold contacts. Techflex braided sleeves protect the individual fan-out legs.\u003c\/p\u003e\u003cp\u003eConnect the DB25 male end to a compatible analog DB25 port and secure it using the attached metal thumb screws. Route the numbered XLR male ends to matching XLR female inputs, outputs, or patch-bay points as required by the connected equipment. Verify that the destination equipment uses the industry-standard analog DB25 pinout and that male XLR connectors are appropriate for the application.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301828678,"sku":"GOLD-DB25-XLRM-05","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71aOoRyCwLL.jpg?v=1784264676"},{"product_id":"mogami-gold-db25-xlrm-10-8-channel-db25-to-xlrm-snake","title":"Mogami GOLD-DB25-XLRM-10 8-Channel DB25 to XLRM Snake","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRM-10 is a 10-foot, eight-channel analog breakout snake designed to connect a DB25-equipped audio interface, console, converter, or patchbay to eight XLR male connections. It consolidates multiple balanced analog audio paths into one organized cable run. This makes it useful where rack equipment and studio wiring need a clean, serviceable connection method.\u003c\/p\u003e\u003cp\u003eBuilt around Mogami 2932 Neglex multicore cable, this assembly uses individually twisted and shielded channel pairs. The construction is intended to help minimize interference between channels and reduce exposure to electromagnetic and radio-frequency noise. It is suited to line-level analog routing in recording, broadcast, and production environments.\u003c\/p\u003e\u003cp\u003eThe cable uses an industry-standard analog DB25 pinout and provides eight XLR 3-pin male connectors at the fanout end. It is appropriate for equipment that uses compatible analog DB25 I\/O wiring. Confirm the pinout requirement of connected equipment before purchase, particularly when working with digital or non-standard DB25 interfaces.\u003c\/p\u003e\u003cp\u003eEach channel is individually jacketed and marked with printed, underlined numbering to make identification easier during installation and troubleshooting. The 10-foot length provides useful reach for routing between a rack, console, patchbay, or outboard equipment. Its flexible PVC jacket and compact multicore format help reduce cable clutter compared with eight separate XLR cables.\u003c\/p\u003e\u003cp\u003eA rugged all-metal D-sub shell, gold-contact terminations, and metal thumb screws support repeated connection and removal in studio systems. The underlying Mogami 2932 cable is specified for operation from -20°C to 70°C. This cable is a practical system-building component for balanced analog signal paths where a DB25 fanout to XLR male connectors is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Breaks out one DB25 connection to eight XLR male connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry-Standard Pinout:\u003c\/strong\u003e Designed for compatible analog DB25-equipped audio hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Pairs:\u003c\/strong\u003e Helps limit noise pickup and channel-to-channel interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2932 Construction:\u003c\/strong\u003e Uses 8-channel Neglex multicore studio snake cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumbered Channel Identification:\u003c\/strong\u003e Printed, underlined markings simplify routing and maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal D-Sub Hardware:\u003c\/strong\u003e All-metal shell and thumb screws support secure attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-DB25-XLRM-10 combines a flexible 8-channel Mogami 2932 cable with individually shielded twisted pairs, flexible PVC jacketing, and a rugged metal D-sub shell. Its XLR fanout uses gold-contact connectors, while the DB25 connector is secured with easy-grab metal thumb screws. The cable's overall bulk-cable diameter is approximately 11.5 mm, helping it remain manageable for multi-channel routing.\u003c\/p\u003e\u003cp\u003eConnect the DB25 end only to equipment using the compatible industry-standard analog DB25 pinout, then route the eight numbered XLR male ends to corresponding XLR female inputs. Use the channel numbers to maintain consistent signal assignments between the source and destination. This assembly is intended for balanced analog audio connections; it is not an AES\/EBU digital DB25 breakout cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599302189126,"sku":"GOLD-DB25-XLRM-10","price":325.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71k5HMbGdNL.jpg?v=1784264717"},{"product_id":"mogami-gold-key-s-06r-6-stereo-keyboard-cable","title":"Mogami GOLD-KEY-S-06R 6' Stereo Keyboard Cable","description":"\u003cp\u003eThe Mogami GOLD-KEY-S-06R is a 6-foot unbalanced stereo keyboard and instrument cable for sending left and right channels through a single paired cable assembly. It uses two 1\/4-inch TS connections at each end, making it appropriate for keyboards, synthesizers, electronic pianos, drum machines, and other gear with separate unbalanced left and right outputs. The paired construction helps keep a stereo run organized instead of requiring two loose instrument cables.\u003c\/p\u003e\u003cp\u003eThis cable is intended for musicians and engineers who need a short stereo connection between an instrument and a DI box, mixer, audio interface, amplifier, or powered speaker system. The dual right-angle end is useful at the instrument side where rear-panel space can be limited. Dual straight plugs at the destination side provide a conventional connection for inputs and patching.\u003c\/p\u003e\u003cp\u003eEach channel is unbalanced and individually shielded, helping keep the left and right signal paths separated within the cable assembly. Mogami specifies its Neglex 2965 Siamese cable for this Gold Keyboard S model. The cable uses oxygen-free copper conductors and high-density spiral shielding as part of its construction.\u003c\/p\u003e\u003cp\u003eThe GOLD-KEY-S-06R uses 1\/4-inch TS male plugs rather than a single 1\/4-inch TRS stereo plug. This means it carries stereo as two separate mono connections: one plug for left and one plug for right. Colored channel identification helps distinguish the two connections during setup.\u003c\/p\u003e\u003cp\u003eFor a compact keyboard rig, this cable can simplify wiring from stereo outputs to two unbalanced line-level inputs. Its 6-foot length suits close-range connections on a stage, desktop production setup, or studio workstation. Mogami covers Gold series cables with its lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo Pair:\u003c\/strong\u003e Carries separate left and right unbalanced signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Length:\u003c\/strong\u003e Suits short runs between nearby audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual TS Plugs:\u003c\/strong\u003e Uses two 1\/4-inch mono connections at each end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Instrument End:\u003c\/strong\u003e Helps accommodate tight rear-panel keyboard connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex 2965 Cable:\u003c\/strong\u003e Uses Mogami Siamese left\/right cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Contacts:\u003c\/strong\u003e Gold-plated plug contacts support reliable signal connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-KEY-S-06R combines two shielded channels in Mogami's 2965 Siamese cable format. It uses oxygen-free copper conductors, high-density spiral shielding, flexible cable jacketing, and gold-contact 1\/4-inch plugs. The two channels are individually identified for easier left\/right routing.\u003c\/p\u003e\u003cp\u003eConnect the two right-angle TS plugs to the left and right unbalanced outputs of a keyboard or other stereo source, then connect the two straight TS plugs to matching unbalanced inputs on a DI box, mixer, interface, amplifier, or powered speakers. Use this cable only where separate 1\/4-inch TS left and right connections are required. It does not replace a single balanced TRS cable or a single stereo TRS-to-dual-TS breakout cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599302418502,"sku":"GOLD-KEY-S-06R","price":137.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61bBeZify5L.jpg?v=1784264737"},{"product_id":"mogami-gold-key-s-15r-15-stereo-keyboard-cable","title":"Mogami GOLD KEY S-15R 15' Stereo Keyboard Cable","description":"\u003cp\u003eThe Mogami GOLD KEY S-15R is a 15-foot unbalanced stereo keyboard cable set for connecting a keyboard, synthesizer, or other stereo instrument with dual 1\/4-inch TS outputs. It provides two matched signal paths in a Siamese side-by-side cable construction, keeping left and right channels together for cleaner routing. One end uses straight plugs, while the other uses right-angle plugs for more flexible placement around instrument panels, mixers, amplifiers, and interfaces.\u003c\/p\u003e\u003cp\u003eThis cable is intended for players and engineers who need to carry separate left and right unbalanced signals without using two loose instrument cables. The paired layout helps keep a stereo keyboard connection organized between an instrument and a destination with dual 1\/4-inch TS inputs. Red and white channel markers help identify the two cable runs during setup and troubleshooting.\u003c\/p\u003e\u003cp\u003eMogami builds the Gold Key S series with 2965 Siamese left\/right cable and oxygen-free copper conductors. Its Ultra High Density Spiral Shield is designed to support a low-noise unbalanced signal path. The cable is specified with low capacitance for accurate signal response in keyboard and instrument applications.\u003c\/p\u003e\u003cp\u003eEach channel terminates in a Neutrik 1\/4-inch TS male connector, with a straight plug at one end and a 90-degree plug at the other. The right-angle ends can help reduce protrusion from closely spaced jacks and support more compact cable routing. Gold contacts are specified for the connectors.\u003c\/p\u003e\u003cp\u003eThe GOLD KEY S-15R fits stereo keyboard rigs, synthesizer setups, stage amplifiers, mixers, audio interfaces, and other equipment using dual unbalanced 1\/4-inch TS connections. It is not a balanced TRS cable and should be matched to equipment with separate left and right unbalanced outputs and inputs. The package includes a pair of 15-foot stereo keyboard cables and is covered by Mogami's lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Stereo Channels:\u003c\/strong\u003e Carries separate left and right unbalanced instrument signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Foot Length:\u003c\/strong\u003e Provides 15 feet of reach per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiamese Cable Layout:\u003c\/strong\u003e Keeps the two stereo channels together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Conductors:\u003c\/strong\u003e Uses oxygen-free copper core conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Shielding:\u003c\/strong\u003e Uses an Ultra High Density Spiral Shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed Plug Orientation:\u003c\/strong\u003e Straight and 90-degree TS plugs support flexible routing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD KEY S-15R uses Mogami 2965 Siamese left\/right cable construction, black outer cabling, oxygen-free copper conductors, and spiral shielding. Neutrik connectors are fitted at both ends of each channel, with gold contacts specified for the plugs. Red and white identification tape distinguishes the stereo channels.\u003c\/p\u003e\u003cp\u003eConnect the two straight or right-angle 1\/4-inch TS plugs to the separate left and right outputs of a stereo keyboard, then connect the matching ends to two unbalanced TS inputs on a mixer, amplifier, interface, or other audio device. Choose the right-angle end where reduced connector clearance is useful, such as at a keyboard output panel or tightly spaced equipment rack. Keep the red and white channel identifiers consistent from source to destination to preserve left\/right orientation.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599302549574,"sku":"GOLD-KEY-S-15R","price":159.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51dDKZ_SQBL.jpg?v=1784264755"},{"product_id":"mogami-gold-key-s-20r-20-stereo-keyboard-cable","title":"Mogami GOLD-KEY-S-20R 20' Stereo Keyboard Cable","description":"\u003cp\u003eThe Mogami GOLD-KEY-S-20R is a 20-foot unbalanced stereo cable set for connecting keyboards, synthesizers, organs, digital pianos, and other stereo devices with left\/right 1\/4-inch TS outputs. It provides two matched signal paths in a single Siamese-style cable assembly, helping keep a stereo setup organized between an instrument and a mixer, amplifier, powered speaker system, or audio interface. The package includes a pair of cables with dual right-angle TS plugs on one end and dual straight TS plugs on the other.\u003c\/p\u003e\u003cp\u003eThis cable is intended for unbalanced stereo line-level connections, where separate left and right TS connections are needed. Its right-angle plugs can be useful at instruments or equipment with closely spaced rear-panel jacks, helping reduce connector protrusion in tighter setups. Red and white channel markers identify the two cable paths for left\/right routing.\u003c\/p\u003e\u003cp\u003eMogami builds the Gold Key S series with Neglex 2965 dual coaxial cable, using oxygen-free copper conductors and individually shielded channels. The cable's Ultra High Density spiral shielding is designed to help reduce noise pickup in studio and live-sound signal paths. Its unbalanced TS configuration should be matched to equipment that uses 1\/4-inch TS left\/right connections.\u003c\/p\u003e\u003cp\u003eEach cable path uses a 1\/4-inch TS male connector at both ends, with a right-angle connector at one end and a straight connector at the other. Neutrik connectors are specified for the assembly, while the contacts are gold plated. This layout lets users choose the end orientation that works best at the keyboard, mixer, interface, or powered speaker.\u003c\/p\u003e\u003cp\u003eThe GOLD-KEY-S-20R is a practical option when a stereo instrument needs a 20-foot run without managing two entirely separate loose cables. It fits applications such as keyboard-to-mixer, keyboard-to-powered-speaker, and stereo effects or playback-device routing where unbalanced TS inputs and outputs are available. A limited lifetime manufacturer warranty is included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Stereo Paths:\u003c\/strong\u003e Carries separate left and right unbalanced signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides 6.1 meters of reach for setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTS Plug Configuration:\u003c\/strong\u003e Uses dual 1\/4-inch TS male connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Ends:\u003c\/strong\u003e Helps accommodate space-conscious equipment connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex 2965 Cable:\u003c\/strong\u003e Uses dual coaxial oxygen-free copper construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Identification:\u003c\/strong\u003e Red and white markers distinguish stereo paths.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable assembly uses black Mogami 2965 Siamese dual-channel cable with oxygen-free copper conductors, shielding, flexible PVC jacketing, and gold-plated contacts. Each signal channel is individually shielded, while the paired construction keeps the left and right runs together. Neutrik connectors are specified, with straight TS plugs at one end and right-angle TS plugs at the other.\u003c\/p\u003e\u003cp\u003eConnect the two right-angle or straight plugs to the left and right 1\/4-inch TS outputs of a keyboard or other unbalanced stereo source, then connect the opposite ends to corresponding TS inputs on a mixer, interface, amplifier, or powered speakers. Match the red- and white-marked cables consistently at both ends to preserve channel assignment. This is an unbalanced cable set and is not a substitute for dual balanced TRS connections.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599302746182,"sku":"GOLD-KEY-S-20R","price":174.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71GEXqhjoML.jpg?v=1784264772"},{"product_id":"mogami-gold-key-sb-10r-10-balanced-stereo-keyboard-cable","title":"Mogami GOLD-KEY-SB-10R 10' Balanced Stereo Keyboard Cable","description":"\u003cp\u003eThe Mogami GOLD-KEY-SB-10R is a 10-foot balanced stereo cable designed for keyboards, synthesizers, organs, digital pianos, and other equipment with separate left and right 1\/4-inch balanced outputs. It provides two matched audio paths in one cable assembly, helping keep stereo connections organized between an instrument and a mixer, powered speaker system, amplifier, or audio interface. The cable uses two straight TRS plugs at one end and two right-angle TRS plugs at the other.\u003c\/p\u003e\u003cp\u003eThis cable is intended for balanced line-level stereo connections, where the source and destination both provide 1\/4-inch TRS balanced jacks. Its dual-channel format supports separate left and right signals without needing two individual cables. The 10-foot length suits nearby stage rigs, desktop studio systems, keyboard stands, and rack-based setups.\u003c\/p\u003e\u003cp\u003eMogami specifies oxygen-free copper conductors and dual twisted-pair construction inside a single stereo microphone cable. Each channel is shielded to support clean signal transfer in installations where electrical interference may be present. Gold-contact 1\/4-inch TRS connectors complete the balanced signal path.\u003c\/p\u003e\u003cp\u003eThe right-angle connector pair is useful at the instrument end when rear or side panel clearance is limited. The straight connector pair can be routed to a mixer, powered speakers, audio interface, or other balanced stereo destination. This arrangement helps reduce cable protrusion around a keyboard or synth while retaining a straightforward connection at the receiving equipment.\u003c\/p\u003e\u003cp\u003eUse the GOLD-KEY-SB-10R as part of a balanced keyboard rig rather than as a speaker cable or an unbalanced guitar lead. It is a practical upgrade for users who want a dedicated left\/right cable assembly with matched channel lengths and durable professional-style construction. Mogami includes its Limited Lifetime \"No Excuses\" Warranty for new cables purchased through authorized resellers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Stereo Format:\u003c\/strong\u003e Carries separate left and right balanced audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Fits compact stage and studio equipment layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual TRS Connections:\u003c\/strong\u003e Supports balanced 1\/4-inch left\/right input and output pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Plug End:\u003c\/strong\u003e Helps manage clearance at keyboard or synth jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Conductors:\u003c\/strong\u003e Uses oxygen-free copper cable cores.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's Limited Lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-KEY-SB-10R combines two channels within one stereo microphone-cable assembly, using dual twisted-pair conductors, oxygen-free copper cores, and Ultra High Density spiral shielding. The channels are individually shielded and use numbered protected jackets. Its 1\/4-inch TRS connectors have gold contacts, with two straight plugs on one end and two right-angle plugs on the other.\u003c\/p\u003e\u003cp\u003eConnect the two TRS plugs to the left and right balanced outputs of a compatible keyboard, synthesizer, organ, or digital piano, then connect the matching pair to balanced TRS inputs on a mixer, interface, amplifier, powered speaker, or loudspeaker system. Confirm that both devices use 1\/4-inch TRS balanced connections; this cable is not intended to convert between balanced and unbalanced formats. Place the right-angle end where lower-profile routing is most useful, and avoid tightly bending the cable at the connector exits.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599302975558,"sku":"GOLD-KEY-SB-10R","price":186.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51BcR5npl4L.jpg?v=1784264792"},{"product_id":"mogami-gold-key-sb-20r-20-balanced-stereo-keyboard-cable","title":"Mogami GOLD-KEY-SB-20R 20' Balanced Stereo Keyboard Cable","description":"\u003cp\u003eThe Mogami GOLD-KEY-SB-20R is a 20-foot balanced stereo cable pair designed to connect keyboards, synthesizers, organs, and digital pianos with left and right 1\/4-inch TRS outputs. It provides two matched signal paths in a Siamese-style joined cable layout, keeping a stereo connection organized between an instrument and a mixer, audio interface, powered speaker system, or amplifier. One end uses dual right-angle TRS plugs, while the other uses dual straight TRS plugs.\u003c\/p\u003e\u003cp\u003eThis cable is intended for balanced stereo line-level connections where separate left and right channels are required. Its balanced TRS wiring helps support noise rejection in compatible balanced audio systems, which is useful for longer runs on stage or in a recording setup. The 20-foot length provides placement flexibility without requiring two separate loose cables.\u003c\/p\u003e\u003cp\u003eMogami builds the Gold Key SB series with Mogami 3106 stereo line\/microphone cable, using oxygen-free copper conductors and a high-density spiral shield. The joined left\/right construction helps simplify cable routing while retaining separate channels for stereo operation. Red and white identification markings distinguish the two cable paths.\u003c\/p\u003e\u003cp\u003eDual right-angle connectors are suited to keyboards and other equipment where jack clearance is limited or where a cable needs to route closely along the rear panel. The opposite straight connectors provide a conventional connection at the receiving end of the signal chain. All four plugs are 1\/4-inch TRS male connectors with gold contacts.\u003c\/p\u003e\u003cp\u003eThe GOLD-KEY-SB-20R is a practical choice for musicians, engineers, and installers building a balanced stereo instrument connection. It can serve as a direct keyboard-to-mixer run or as part of a larger live sound, studio, or powered-speaker system. A limited lifetime manufacturer warranty is included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Stereo Pair:\u003c\/strong\u003e Carries separate left and right balanced TRS signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Supports flexible equipment placement and organized routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Ends:\u003c\/strong\u003e Helps conserve space at keyboard output jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 3106 Cable:\u003c\/strong\u003e Uses joined stereo line\/microphone cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors support reliable signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Shielding:\u003c\/strong\u003e High-density shielding helps reduce unwanted noise pickup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses a black Siamese left\/right configuration that keeps its two balanced channels together for cleaner routing. Its Mogami 3106 cable construction uses 24 AWG oxygen-free copper conductors, XLPE insulation, PVC jacketing, and an ultra-high-density spiral shield. The connectors are Neutrik 1\/4-inch TRS plugs, with right-angle plugs at one end and straight plugs at the other.\u003c\/p\u003e\u003cp\u003eConnect the paired right-angle TRS plugs to the left and right balanced outputs of a keyboard, synthesizer, organ, or digital piano, then connect the straight TRS plugs to corresponding balanced line inputs. Match the red and white channel identifiers consistently at both ends to preserve left\/right orientation. This is a stereo cable pair for balanced TRS connections; it is not a speaker cable and does not convert balanced outputs to unbalanced connections.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599303139398,"sku":"GOLD-KEY-SB-20R","price":219.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51BcR5npl4L_445262af-7ed6-47af-acc9-7a6d0181c879.jpg?v=1784264815"},{"product_id":"mogami-gold-trsxlrm-30-30-foot-trs-to-xlr-male-cable","title":"Mogami GOLD-TRSXLRM-30 30-Foot TRS to XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD-TRSXLRM-30 is a 30-foot balanced audio cable with a 1\/4-inch TRS male connector on one end and an XLR male connector on the other. It provides a practical way to join compatible balanced line-level equipment with different connector formats. This cable is intended for studio, live-sound, and powered-speaker signal paths.\u003c\/p\u003e\u003cp\u003eThis cable is suited to users connecting mixers, audio interfaces, keyboards, processors, powered speakers, and other equipment with compatible balanced TRS and XLR connections. Its 30-foot length provides added reach for equipment placed across a room, stage, or control area. Verify the connector gender and input or output type on both devices before ordering.\u003c\/p\u003e\u003cp\u003eThe Gold TRS-XLRM uses Mogami Neglex W2534 quad microphone cable, a four-conductor design made for balanced audio applications. The quad construction and spiral copper shield are designed to help reduce the effects of electromagnetic and radio-frequency interference. It is a signal cable for audio interconnection, not a speaker cable for carrying amplified speaker power.\u003c\/p\u003e\u003cp\u003eXLPE conductor insulation is used in the cable construction for stable electrical characteristics, while the flexible PVC outer jacket supports routine routing and handling. The cable uses a served bare-copper shield around the conductors. Gold-contact connector terminations provide the TRS-to-XLRM interface.\u003c\/p\u003e\u003cp\u003eUse the GOLD-TRSXLRM-30 where a balanced 1\/4-inch TRS connection needs to interface with a female XLR input or panel connector. It can be a useful part of a system upgrade when replacing a shorter run or standardizing a balanced signal path. Mogami backs the Gold TRS-XLRM series with a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot Length:\u003c\/strong\u003e Provides reach for spaced studio or live-sound equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS to XLRM Ends:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and female XLR ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Wiring:\u003c\/strong\u003e Supports balanced line-level audio signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for enhanced noise-canceling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps protect the signal from external interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-TRSXLRM-30 is built around Mogami W2534 Neglex Quad cable with 24 AWG OFC conductors, XLPE insulation, a served bare-copper shield, and a flexible PVC jacket. Its quad conductor arrangement and dense spiral shield are designed for balanced audio runs in environments where electromagnetic or radio-frequency noise can be a concern. The cable has gold-contact TRS and XLRM connector terminations.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the XLR male end to a compatible female XLR input or connector. Route the cable away from AC power cords, power supplies, and other potential interference sources where practical. This cable is for low-level audio interconnection; do not use it between a power amplifier and a passive speaker.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599303303238,"sku":"GOLD-TRSXLRM-30","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71F_THexVRL.jpg?v=1784264835"},{"product_id":"mogami-mcp-gt-r-20-20-right-angle-instrument-cable","title":"Mogami MCP GT R 20 20' Right-Angle Instrument Cable","description":"\u003cp\u003eThe Mogami MCP GT R 20 is a 20-foot unbalanced instrument cable designed for guitar, bass, keyboards, pedals, and other equipment using 1\/4-inch TS connections. It uses a right-angle plug on one end and a straight plug on the other, helping accommodate instruments or pedals with side-mounted jacks. This configuration provides a practical connection path while maintaining a single-channel instrument-level signal path.\u003c\/p\u003e\u003cp\u003ePart of the Mogami CorePlus line, this cable is intended for players and performers who need a dependable everyday cable for rehearsal, stage, studio, or home use. Its 20-foot length gives useful reach between an instrument and amplifier, pedalboard, DI box, or recording interface. The right-angle connector can help reduce cable protrusion where space around the output jack is limited.\u003c\/p\u003e\u003cp\u003eCorePlus instrument cables use an ultra-high-density spiral shield to help reduce the effects of external interference. Finely stranded bare copper conductors support flexibility for routine setup and teardown. Mogami also specifies optimized capacitance for a neutral tonal response across the cable run.\u003c\/p\u003e\u003cp\u003eThe MCP GT R 20 is an analog mono TS-to-TS cable, not a speaker cable, balanced microphone cable, or stereo audio cable. It is suited to unbalanced instrument connections that use standard 1\/4-inch phone jacks. Use it wherever a guitar-style cable is required between compatible equipment.\u003c\/p\u003e\u003cp\u003eFor a system upgrade, this cable can replace a worn, noisy, or inconveniently shaped instrument lead without changing the rest of the signal chain. The right-angle end is especially useful at many guitar, bass, and pedalboard connections, while the straight end fits conventional amplifier and pedal inputs. Its black jacket and flexible construction make it appropriate for portable music rigs and fixed practice setups alike.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides practical reach for instruments, pedals, amplifiers, and recording setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRight-Angle Connector:\u003c\/strong\u003e Helps manage clearance at side-mounted instrument or pedal jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector:\u003c\/strong\u003e Fits standard 1\/4-inch TS input and output connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTS Instrument Format:\u003c\/strong\u003e Carries a mono unbalanced instrument-level audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Shielding:\u003c\/strong\u003e Helps reduce unwanted external interference during signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorePlus Construction:\u003c\/strong\u003e Uses finely stranded bare copper for flexibility and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MCP GT R 20 uses Mogami CorePlus construction with finely stranded bare copper conductors, an ultra-high-density spiral shield, and a durable outer jacket. Mogami specifies optimized capacitance for neutral tonal response in its CorePlus instrument-cable design. The cable is finished in black and uses one right-angle and one straight 1\/4-inch TS connector.\u003c\/p\u003e\u003cp\u003eConnect the right-angle end where a low-profile cable exit is useful, such as an instrument output jack or pedalboard connection, and connect the straight end to the compatible destination. This cable is intended for mono unbalanced 1\/4-inch TS instrument connections. It does not require external power, adapters, or special configuration when used with compatible TS-equipped gear.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599303467078,"sku":"MCP GT R 20","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/6171qyPRAvL.jpg?v=1784264852"}],"url":"https:\/\/audiowatt.store\/collections\/pro-audio-cables.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}