{"title":"Patch Cables","description":null,"products":[{"product_id":"mogami-gold-3-5-2rca-06-3-5mm-trs-to-dual-rca-cable","title":"Mogami GOLD 3.5-2RCA-06 3.5mm TRS to Dual RCA Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 RCA 06 is a 6-foot stereo breakout cable with one 3.5mm TRS male plug on one end and two RCA male plugs on the other. It is designed to route left\/right analog audio from a device with a 3.5mm stereo output to equipment with stereo RCA inputs. This format is useful for connecting portable players, computers, media devices, and other compatible sources to an amplifier, receiver, mixer, or powered audio system.\u003c\/p\u003e\u003cp\u003eThe cable carries a stereo analog signal, with the dual RCA connectors separating the left and right channels at the destination. Its 6-foot length provides practical reach for nearby components while keeping cable routing manageable. It is intended for line-level stereo connections rather than speaker-level wiring.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with its 2930 two-channel snake cable, using 26 AWG conductors and a shielded construction. XLPE insulation, a drain wire, and a served spiral shield are part of the underlying cable design. These construction details support tidy, durable analog audio routing in systems where cable handling and electrical noise control matter.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used on the connectors, and the cable uses straight connectors at both ends. The 3.5mm TRS plug is male, while each RCA connector is also male. This makes the cable a direct connection solution when the source has a 3.5mm stereo output and the receiving equipment has open left\/right RCA inputs.\u003c\/p\u003e\u003cp\u003eFor vehicle, home, studio, DJ, or portable-audio integration, this cable can bridge compatible stereo outputs and RCA inputs without combining channels. It is a useful option when adding an external source to a system with analog RCA connectivity. As with any analog connection, the source and destination should be powered down or volume reduced before connecting equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm-to-RCA Stereo Breakout:\u003c\/strong\u003e Connects one 3.5mm TRS stereo output to separate left and right RCA inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Cable Length:\u003c\/strong\u003e Provides 6 feet of reach for nearby source components and audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2930 Snake Cable:\u003c\/strong\u003e Uses Mogami 2930 two-channel snake cable as the cable platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielded 26 AWG Construction:\u003c\/strong\u003e Uses shielded 26 AWG conductors for analog audio signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold-plated connector contacts support repeated connection and disconnection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Male Connectors:\u003c\/strong\u003e Features a straight 3.5mm TRS male plug and two straight RCA male plugs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 RCA 06 uses a black flexible PVC outer jacket over Mogami 2930 cable construction. Its underlying cable design includes XLPE insulation, a drain wire, and a served spiral shield. The assembly is terminated with gold-plated contacts and straight male connectors on both ends.\u003c\/p\u003e\u003cp\u003eConnect the 3.5mm TRS male plug to a compatible stereo line or headphone output, then connect the two RCA male plugs to matching left and right RCA inputs. Confirm that the receiving equipment has RCA inputs rather than outputs, and observe left\/right channel markings where provided. Devices without a 3.5mm output or systems without RCA inputs require appropriate separate adapters or conversion hardware.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599285248070,"sku":"GOLD 3.5 2 RCA 06","price":101.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/718uJOsrqEL.jpg?v=1784263759"},{"product_id":"mogami-gold-3-5-2-rca-20-3-5mm-trs-to-dual-rca-cable","title":"Mogami GOLD 3.5 2 RCA 20 3.5mm TRS To Dual RCA Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 RCA 20 is a 20-foot stereo breakout cable with one 3.5mm TRS male plug on one end and dual RCA male plugs on the other. It provides a direct way to connect a device with a stereo 3.5mm output to an audio component with left\/right RCA inputs. This makes it useful for linking portable players, computers, media devices, mixers, amplifiers, powered speakers, and compatible car-audio auxiliary inputs.\u003c\/p\u003e\u003cp\u003eThis cable is intended for listeners, DJs, musicians, and installers who need a long analog stereo connection without using separate adapters. The 3.5mm TRS plug carries stereo left and right audio, while the two RCA plugs route those channels individually to a stereo input. Its 20-foot length supports systems where the source and destination are positioned farther apart.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2930 two-channel snake cable, using individually twisted and shielded conductor pairs. The construction includes XLPE insulation, drain wires, and served spiral bare-copper shielding. These features are designed to help control unwanted interference in audio installations.\u003c\/p\u003e\u003cp\u003eGold-plated connector contacts support reliable repeated connections, while the flexible PVC outer jacket is made for regular handling. The cable uses a 26 AWG conductor construction and remains shielded from end to end. Its black finish keeps the installation visually discreet in home, studio, live-sound, and vehicle applications.\u003c\/p\u003e\u003cp\u003eFor a car-audio upgrade, the GOLD 3.5 2 RCA 20 can be used where a 3.5mm stereo source needs to feed an RCA-equipped auxiliary input, amplifier, processor, or mixer. It is a passive analog cable and does not add Bluetooth, USB audio, charging, or digital-audio conversion. Confirm that the equipment being connected uses compatible male\/female 3.5mm TRS and RCA connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm TRS to Dual RCA:\u003c\/strong\u003e Splits one stereo mini-jack output into separate left and right RCA channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides extra reach for remote sources, equipment racks, and vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2930 Cable Construction:\u003c\/strong\u003e Uses Mogami two-channel snake cable with individually twisted shielded pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shielding:\u003c\/strong\u003e Helps reduce susceptibility to radio-frequency and electrical interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Supports dependable signal contact through repeated plugging and unplugging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PVC Jacket:\u003c\/strong\u003e Provides a durable, manageable outer covering for routing and everyday use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines a black flexible PVC outer jacket with individually shielded internal channels. Each channel uses a drain wire and served spiral bare-copper shield, and the conductors use XLPE insulation. The assembly has gold-plated contacts and straight 3.5mm TRS and RCA male connectors.\u003c\/p\u003e\u003cp\u003eConnect the 3.5mm TRS male plug to a compatible stereo output, then connect the RCA plugs to the matching left and right RCA input channels on the destination equipment. Route the cable away from power wiring and moving parts when possible, and avoid sharply bending or pinching it during installation. This cable is for stereo analog audio connections and requires compatible female ports at both ends.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599285477446,"sku":"GOLD 3.5 2 RCA 20","price":137.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pMPX7CkcL.jpg?v=1784263782"},{"product_id":"mogami-gold-3-5-2-ts-15-3-5mm-to-dual-1-4-ts-cable","title":"Mogami GOLD 3.5 2 TS 15 3.5mm To Dual 1\/4\" TS Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 TS 15 is a 15-foot stereo Y-adapter cable that connects one 3.5mm TRS stereo connection with two 1\/4-inch TS mono connections. It is intended for line-level stereo audio routing between portable, desktop, studio, and live-sound equipment. The split 1\/4-inch ends carry the left and right channels separately.\u003c\/p\u003e\u003cp\u003eThis cable is useful when a laptop, phone, tablet, portable recorder, or audio interface has a 3.5mm stereo jack but the receiving equipment uses separate 1\/4-inch unbalanced inputs. It can connect a stereo source to two mixer channels, a PA system, or other left\/right line inputs. It may also be used in the opposite direction when compatible line-level connections are required.\u003c\/p\u003e\u003cp\u003eThe GOLD 3.5 2 TS 15 is designed for users who need a longer stereo breakout cable without adding separate adapters and patch cables. Its 15-foot overall length provides reach for studio desks, DJ setups, rehearsal spaces, and equipment racks. An 18-inch fan-out at the dual 1\/4-inch end helps route the left and right plugs to adjacent or spaced input jacks.\u003c\/p\u003e\u003cp\u003eMogami builds this model with W2930 multicore microphone snake cable, using two individually shielded conductors. The cable construction includes XLPE insulation, a drain wire, and spiral bare-copper shielding to help limit interference in electrically busy environments. Gold-plated contact surfaces are used on the connectors.\u003c\/p\u003e\u003cp\u003eAs an unbalanced stereo breakout cable, this model is a practical link between consumer-style 3.5mm stereo audio and professional-style dual 1\/4-inch TS connections. It is not a balanced TRS-to-TRS cable and does not convert an unbalanced signal to balanced operation. For systems with compatible line-level jacks, it provides a direct left\/right connection path with no external converter required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo Y-Adapter Format:\u003c\/strong\u003e Splits one 3.5mm stereo connection into separate left and right 1\/4-inch TS connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Foot Overall Length:\u003c\/strong\u003e Provides added reach for studio, DJ, desktop, and live-sound setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Inch Fan-Out:\u003c\/strong\u003e Gives the dual 1\/4-inch plugs room to reach separate input jacks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2930 Cable Construction:\u003c\/strong\u003e Uses Mogami multicore microphone snake cable for the main cable assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Conductors:\u003c\/strong\u003e Helps reduce unwanted noise pickup between the two audio channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides durable contact surfaces for repeated connections and disconnects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses a black flexible PVC jacket with gold-plated connector contacts and straight connectors at both ends. Its two-channel construction uses 26 AWG conductors with individual shielding, a drain wire, and spiral bare-copper shielding. The 3.5mm TRS plug and both 1\/4-inch TS plugs are male connectors.\u003c\/p\u003e\u003cp\u003eConnect the 3.5mm TRS end to a compatible stereo line or headphone output, then connect the two 1\/4-inch TS plugs to the left and right unbalanced inputs of a mixer, amplifier, PA, recorder, or interface. For reverse use, connect the two 1\/4-inch TS outputs to a compatible stereo 3.5mm input. Confirm that connected equipment is set up for line-level operation where applicable, and use the 18-inch fan-out to keep the left and right channels organized.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599285870662,"sku":"GOLD 3.5 2 TS 15","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71eE12ksxKL.jpg?v=1784263799"},{"product_id":"mogami-gold-3-5-2-xlrf-03-dual-xlrf-to-3-5mm-cable","title":"Mogami GOLD 3.5 2 XLRF 03 Dual XLRF to 3.5mm Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 03 is a 3-foot stereo Y-adapter cable that connects left and right XLR line-level outputs to a single 3.5mm stereo input. It is designed for setups where a mixer, preamp, or audio interface needs to feed a portable recorder, computer, or other device with a 1\/8-inch stereo input. The cable terminates in two XLR female connectors and one 3.5mm TRS male plug.\u003c\/p\u003e\u003cp\u003eThis cable is suited to studio, broadcast, livestream, and location-recording systems that need a compact analog stereo connection. Its dual XLR female ends connect to the source equipment's XLR male outputs, while the 3.5mm plug connects to the destination input. The Y configuration keeps the left and right channels organized in one cable run.\u003c\/p\u003e\u003cp\u003eMogami builds this adapter with multicore microphone snake cable for flexible handling in portable and installed audio systems. Gold-contact connectors are used at both ends, and the connectors are straight for conventional routing through equipment racks, desks, and recorder bags. The 3-foot overall length is useful when connected equipment is positioned nearby.\u003c\/p\u003e\u003cp\u003eThe cable provides a practical interface between professional XLR-based line-level gear and devices using a 3.5mm stereo input. Because the destination connection is a stereo 3.5mm TRS plug, it combines separate left and right channels into one miniature stereo connection. Confirm that the destination has a 3.5mm stereo input and that the source provides dual XLR line-level outputs.\u003c\/p\u003e\u003cp\u003eGOLD 3.5-2XLRF cables are directional by connector type and are not intended to be reversed. The XLR female connectors are intended for the source side, while the 3.5mm TRS male plug goes to the destination input. For the opposite connection direction—from a 3.5mm stereo output to dual XLR inputs—the corresponding dual-XLR-male version is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR Female Ends:\u003c\/strong\u003e Connects to left and right XLR male source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm Stereo TRS Plug:\u003c\/strong\u003e Feeds a single 1\/8-inch stereo input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Foot Length:\u003c\/strong\u003e Suits close-range recorder, interface, and mixer connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticore Snake Cable:\u003c\/strong\u003e Provides flexible cable handling for audio setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Uses gold-contact terminations at both cable ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Bodies:\u003c\/strong\u003e Supports standard routing and conventional equipment placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis black Y-adapter uses Mogami multicore microphone snake cable and straight connectors at both ends. The assembly separates into two XLR female connectors at the fan-out and terminates in one 3.5mm TRS male plug. Gold-contact connectors are specified for the cable.\u003c\/p\u003e\u003cp\u003eConnect the two XLR female ends to the left and right XLR male line outputs of the source device, then insert the 3.5mm TRS plug into a compatible stereo input. Keep the 18-inch fan-out accessible so the XLR connectors can reach the source outputs without strain. This cable is intended for line-level stereo routing and is not the reverse-direction adapter for feeding dual XLR inputs from a 3.5mm output.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286034502,"sku":"GOLD 3.5 2 XLRF 03","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL.jpg?v=1784263824"},{"product_id":"mogami-gold-3-5-2-xlrf-06-dual-xlrf-y-adapter-cable","title":"Mogami GOLD 3.5 2 XLRF 06 Dual XLRF Y-Adapter Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 06 is a 6-foot stereo breakout cable with one 3.5mm TRS male plug and two XLR female connectors. It is designed for routing a stereo line-level signal from left and right XLR outputs to a device equipped with a 3.5mm stereo input. This configuration can simplify connections between mixers, preamps, audio interfaces, and recorders or computers with a miniature stereo input.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio, live-sound, streaming, recording, and portable-production systems where compatible connectors are already present. Its dual XLR female ends connect to corresponding XLR male output connectors, while the 3.5mm TRS plug connects to the destination's stereo input. The left and right XLR legs provide a practical way to combine a two-channel source into one stereo mini-jack connection.\u003c\/p\u003e\u003cp\u003eMogami builds this GOLD-series Y-adapter with multicore microphone snake cable for flexible handling in professional audio environments. The cable uses gold-contact connectors and straight connector housings at both ends. Its 18-inch fan-out gives the two XLR female connectors useful separation when connecting adjacent output channels.\u003c\/p\u003e\u003cp\u003eThe 3.5mm TRS end carries an unbalanced stereo connection, so this cable should not be treated as a fully balanced end-to-end signal path. It is best used with compatible line-level equipment and appropriately configured input and output levels. For applications requiring a 3.5mm output to feed dual XLR inputs, Mogami offers the separate 3.5-2XLRM configuration with XLR male connectors.\u003c\/p\u003e\u003cp\u003eAt 6 feet overall, the GOLD 3.5 2 XLRF 06 fits compact desktop rigs, portable recording kits, and nearby rack or mixer connections. It can replace multi-adapter setups with one purpose-built stereo cable. The included Mogami limited lifetime warranty supports long-term use by the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo XLR-to-3.5mm Breakout:\u003c\/strong\u003e Connects dual XLR female ends to one 3.5mm TRS male plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Overall Length:\u003c\/strong\u003e Provides reach for close-range studio and production connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Inch XLR Fan-Out:\u003c\/strong\u003e Separates the left and right XLR connectors for easier routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Uses gold-contact terminations for durable connection points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticore Cable Construction:\u003c\/strong\u003e Uses Mogami multicore microphone snake cable for flexible handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Design:\u003c\/strong\u003e Keeps both the TRS plug and XLR connectors straight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 XLRF 06 uses a black, flexible multicore cable with a Y-split construction. It has a straight 3.5mm TRS male connector on one end and two straight 3-pin XLR female connectors on the other. Gold contacts and the 18-inch fan-out are part of the cable's purpose-built audio-interconnect design.\u003c\/p\u003e\u003cp\u003eConnect the XLR female connectors to compatible left and right XLR male outputs, then connect the 3.5mm TRS plug to a compatible stereo line input. Verify that the destination accepts a 3.5mm stereo input and set connected devices for suitable line-level operation. This model is directional by connector gender; use the separate 3.5-2XLRM version when a 3.5mm source must feed dual XLR female inputs.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286198342,"sku":"GOLD 3.5 2 XLRF 06","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL_6bd3d50e-bef2-4b60-a757-381f923d727d.jpg?v=1784263840"},{"product_id":"mogami-gold-3-5-2-xlrf-20-dual-xlrf-to-3-5mm-cable","title":"Mogami GOLD 3.5 2 XLRF 20 Dual-XLRF to 3.5mm Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 20 is a 20-foot stereo breakout cable with one 3.5mm TRS male plug and two 3-pin XLR female connectors. It is designed to route separate left and right audio channels from XLR-equipped source outputs to a device with a 3.5mm stereo line input. This configuration is useful for connecting mixers, preamps, audio interfaces, or other dual-XLR-output equipment to compatible recorders and computer audio inputs.\u003c\/p\u003e\u003cp\u003eThe dual XLR female ends connect to XLR male outputs, while the 3.5mm TRS plug connects to the destination's stereo mini input. Although it uses XLR connectors at the source end, the stereo 3.5mm TRS termination means the complete connection is not balanced end-to-end. This is a directional adapter cable and is not intended as the reverse of a 3.5mm output-to-dual-XLR-input cable.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2930 two-channel multicore microphone snake cable. The cable construction uses individually shielded pairs, helping keep the left and right channels organized within one flexible outer jacket. Its two-channel design makes it well suited to stereo line-level routing where a single cable run is preferred over two separate cables.\u003c\/p\u003e\u003cp\u003eGold-contact connectors and straight connector bodies support reliable repeated connections in studio, mobile-recording, DJ, and installed audio setups. The 20-foot overall length provides extra reach for equipment racks, workstations, recording spaces, and stage-side connections. An approximately 18-inch fan-out separates the two XLR female connectors for access to adjacent or spaced output jacks.\u003c\/p\u003e\u003cp\u003eThis cable is a practical fit when the source provides left and right audio on separate XLR male outputs and the receiving device accepts a 3.5mm stereo line input. It does not convert microphone-level signals, provide gain control, or change connector gender at the XLR source end. For the opposite signal direction, a cable with dual XLR male connectors is required instead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo XLR Breakout:\u003c\/strong\u003e Routes separate left and right channels to one 3.5mm TRS input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Cable Length:\u003c\/strong\u003e Provides reach for studio and recording-system connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR Female Ends:\u003c\/strong\u003e Connect to XLR male source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2930 Snake Cable:\u003c\/strong\u003e Uses two individually shielded audio channels in one jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Supports dependable contact surfaces for repeated connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Design:\u003c\/strong\u003e Suits conventional equipment-panel and recorder connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 XLRF 20 uses Mogami W2930 two-channel multicore cable with flexible PVC construction, XLPE insulation, drain wires, and served spiral shielding for each channel. The main cable section has a two-channel snake layout, while the XLR ends are split into a fan-out. Straight connectors at both ends keep the cable suitable for standard front-, side-, and rear-panel connections.\u003c\/p\u003e\u003cp\u003eConnect the two XLR female connectors to the corresponding left and right XLR male line outputs of the source device, then connect the 3.5mm TRS plug to a compatible stereo line input. Confirm that the receiving 3.5mm jack accepts stereo line-level audio and set levels at the source or destination as needed. Do not use this cable where dual XLR male connectors are required at the destination, and do not treat the complete connection as balanced.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286493254,"sku":"GOLD 3.5 2 XLRF 20","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL_2f71a582-b92e-481b-9ade-994af63be68b.jpg?v=1784263862"},{"product_id":"mogami-gold-3-5-3-5-03-3-5mm-stereo-patch-cable","title":"Mogami GOLD 3.5 3.5 03 3.5mm Stereo Patch Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 3.5 03 is a 3-foot stereo audio patch cable with 3.5mm TRS male plugs on both ends. It provides a direct analog connection between compatible devices with 3.5mm stereo input and output jacks. The short length is well suited to tidy desktop, portable, and component-audio connections.\u003c\/p\u003e\u003cp\u003eThis cable is intended for listeners and system builders who need a dependable 3.5mm-to-3.5mm stereo link. It can connect sources such as phones, tablets, computers, portable players, and compatible A\/V equipment. Both ends use straight connectors for conventional front, side, or rear-panel jack access.\u003c\/p\u003e\u003cp\u003eTwo individually shielded conductors help separate the stereo channels while the cable carries left and right analog audio. The construction is designed to help limit the influence of handling and nearby electrical noise on a low-level audio connection. Gold-plated connector contacts provide the cable's plug contact surfaces.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2447 flexible microphone cable. That cable stock uses a flexible PVC outer jacket and a compact 5mm outer diameter. The result is a cable that can be routed easily in close-range setups without adding unnecessary bulk.\u003c\/p\u003e\u003cp\u003eUse the GOLD 3.5 3.5 03 when both connected components have standard 3.5mm stereo TRS jacks. It is an appropriate link between an auxiliary source and a compatible audio input, or between compact audio components. No adapters are included, so equipment with different connector types will require the appropriate separate adapter or cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm TRS To 3.5mm TRS:\u003c\/strong\u003e Connects two compatible stereo mini-jack devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot Length:\u003c\/strong\u003e Supports short, organized component connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connectors:\u003c\/strong\u003e Fits standard non-recessed jack layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides gold-plated plug contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Conductors:\u003c\/strong\u003e Separates and shields the two audio conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PVC Jacket:\u003c\/strong\u003e Helps make routing and handling easier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable has black insulation, straight molded-style connector housings, and gold-plated contacts. Its W2447 cable stock has a 5mm outer diameter, 26 AWG conductors, individually served shields, and a flexible PVC jacket. These details support a compact, flexible form for routine analog audio interconnect use.\u003c\/p\u003e\u003cp\u003eConnect one TRS plug to a 3.5mm stereo output and the other to a 3.5mm stereo input. Confirm that both devices use standard 3.5mm TRS stereo jacks; this cable does not convert connector sizes or formats. Avoid sharply bending the cable at the connectors and route it away from pinch points where practical.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286886470,"sku":"GOLD 3.5 3.5 03","price":75.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61NTA5Jl4qL.jpg?v=1784263878"},{"product_id":"mogami-gold-trs-trs-06-6-ft-balanced-trs-audio-cable","title":"Mogami GOLD TRS-TRS-06 6 ft Balanced TRS Audio Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-TRS-06 is a 6-foot balanced audio interconnect with 1\/4-inch TRS male connectors at both ends. It is intended for routing balanced line-level audio between compatible equipment, including audio interfaces, mixers, patch points, and powered speakers. Its short length is practical for nearby components in studio, stage, broadcast, or desktop audio systems.\u003c\/p\u003e\u003cp\u003eThis cable is designed for users who need a dependable balanced connection where electrical noise can be a concern. Balanced TRS wiring helps compatible source and destination equipment reject common-mode noise along the signal path. It is appropriate for recording, monitoring, live-sound, and equipment-rack interconnect applications.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-TRS-06 uses Mogami W2534 Neglex Studio Quad cable, a four-conductor design with an overall served bare-copper shield. The quad conductor geometry is designed to improve rejection of electromagnetic and radio-frequency interference compared with conventional two-conductor cable designs. This makes it well suited to installations near power supplies, lighting, computers, and other potential noise sources.\u003c\/p\u003e\u003cp\u003eEach end is fitted with a straight 1\/4-inch TRS male connector with gold-plated contacts and a black body. The flexible PVC outer jacket helps the cable route cleanly between adjacent equipment while protecting the internal conductors. Cross-linked polyethylene conductor insulation is used in the cable construction.\u003c\/p\u003e\u003cp\u003eUse this cable when both devices provide compatible 1\/4-inch balanced TRS connections. It is an interconnect cable rather than a speaker cable, so it is not intended to carry amplified speaker output to passive loudspeakers. The 6-foot length can be used as a direct connection within a compact signal chain without leaving excessive slack.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS Connectivity:\u003c\/strong\u003e Connects compatible 1\/4-inch balanced line-level equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Foot Length:\u003c\/strong\u003e Provides 6 feet of reach for nearby gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Studio Quad Cable:\u003c\/strong\u003e Uses four conductors for noise-rejection performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Adds an overall shield against external interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Uses gold-plated contacts on both straight TRS connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible PVC Jacket:\u003c\/strong\u003e Supports practical routing in studio and live-audio setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable is built around Mogami W2534 quad cable with 24 AWG oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible black PVC jacket. Its cable diameter is approximately 6.0 mm, while the straight black-body connectors use gold-plated contacts. The assembly is shielded and uses the same connector type on each end.\u003c\/p\u003e\u003cp\u003eConnect one TRS plug to a balanced 1\/4-inch line output and the other to a balanced 1\/4-inch line input, such as an interface-to-monitor or mixer-to-powered-speaker connection. Verify that both devices use 1\/4-inch TRS balanced analog connections; adapters may be needed for XLR, RCA, 3.5 mm, or other connector formats. Do not use this cable between a power amplifier's speaker outputs and passive speakers.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299305542,"sku":"GOLD TRS-TRS-06","price":79.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61DgPndM6LL.jpg?v=1784264500"},{"product_id":"mogami-gold-trs-trs-20-20-ft-balanced-trs-cable","title":"Mogami GOLD TRS-TRS-20 20 Ft Balanced TRS Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-TRS-20 is a 20-foot balanced audio interconnect with 1\/4-inch TRS male connectors at both ends. It is designed to carry line-level audio between compatible balanced equipment while helping reduce the hum and interference that can occur in electrically busy studio or live-sound setups. It is a practical choice for connecting audio interfaces, mixers, patch bays, outboard processors, powered speakers, and similar gear.\u003c\/p\u003e\u003cp\u003eThis cable uses Mogami Neglex Studio Quad W2534 cable, a four-conductor design intended for balanced analog signal paths. Its construction supports clear signal transfer with strong rejection of electromagnetic and radio-frequency interference. The cable is suited to recording, broadcast, rehearsal, performance, and installed audio applications where a balanced 1\/4-inch connection is available.\u003c\/p\u003e\u003cp\u003eEach end is fitted with a straight 1\/4-inch TRS male connector with gold-plated contacts and a black connector body. The TRS format supports balanced mono line-level connections when used with appropriately wired equipment. It is not an adapter cable and does not change connector formats or convert balanced and unbalanced signal types.\u003c\/p\u003e\u003cp\u003eA served bare-copper spiral shield surrounds the internal conductors, while the flexible PVC outer jacket helps protect the cable during routine handling and routing. The W2534 cable construction uses oxygen-free copper conductors and cross-linked polyethylene insulation. Its approximately 6 mm outer diameter provides a substantial yet manageable cable profile for studio and stage runs.\u003c\/p\u003e\u003cp\u003eThe 20-foot length is useful when equipment is separated by a console, rack, desktop, speaker stand, or stage position. Use it between two devices with 1\/4-inch TRS balanced input and output connections for the intended signal path. For systems using XLR, RCA, TS, 3.5 mm, or speaker-level connections, select the correct cable or adapter for those connections instead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides reach for studio, stage, and powered-speaker connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS Ends:\u003c\/strong\u003e Connects compatible 1\/4-inch balanced line-level equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Studio Quad:\u003c\/strong\u003e Uses Mogami W2534 four-conductor cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce externally induced noise and interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides durable connector contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC Outer Jacket:\u003c\/strong\u003e Adds flexible protection for regular cable routing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-TRS-20 combines 24 AWG oxygen-free copper conductors, cross-linked polyethylene insulation, a served bare-copper shield, and a black PVC jacket. Its straight TRS connectors use black bodies and gold-plated contacts. The cable is built around Mogami W2534 Neglex Studio Quad bulk cable.\u003c\/p\u003e\u003cp\u003eConnect one TRS plug to a balanced 1\/4-inch line output and the other to a balanced 1\/4-inch line input, such as an interface-to-monitor controller, mixer-to-powered speaker, or processor-to-mixer connection. Route the cable away from AC power cords and power supplies when possible, and avoid sharply bending or crushing it. This package includes one 20-foot TRS-to-TRS cable; additional cables are needed for separate left and right stereo channels when each channel uses its own balanced output.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299469382,"sku":"GOLD TRS-TRS-20","price":119.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61DgPndM6LL_93535ae2-6a3c-447c-986b-c18882ff587e.jpg?v=1784264518"},{"product_id":"mogami-gold-trs-trs-30-30-ft-balanced-trs-cable","title":"Mogami GOLD TRS-TRS-30 30 Ft Balanced TRS Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-TRS-30 is a 30-foot balanced audio interconnect with 1\/4-inch TRS male connectors at both ends. It is designed to carry line-level balanced signals between compatible studio, live-sound, and playback components. The long reach supports installations where equipment cannot be placed close together.\u003c\/p\u003e\u003cp\u003eThis cable is suited to connecting balanced outputs and inputs on audio interfaces, mixers, soundboards, outboard processors, and powered speakers. Its 1\/4-inch TRS connectors are intended for equipment that uses balanced TRS line connections. It is not a speaker wire and is not a direct substitute for RCA, XLR, or 3.5 mm connections without appropriate adapters.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2534 Neglex Studio Quad cable, a four-conductor oxygen-free copper design. The quad construction and served bare-copper shield help reduce susceptibility to electromagnetic and radio-frequency interference. This makes the cable particularly practical for longer balanced runs near power equipment, lighting, or other potential noise sources.\u003c\/p\u003e\u003cp\u003eGold-plated contacts and black-bodied straight TRS plugs provide the physical connection at each end. The cable uses XLPE conductor insulation and a flexible PVC outer jacket for regular routing and handling. Its approximately 6.0 mm outer diameter balances durability with manageable cable routing.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-TRS-30 as a balanced line-level link in a recording, podcast, PA, or powered-monitor system. It can connect a balanced 1\/4-inch line output to a matching balanced 1\/4-inch input when the equipment supports that signal format. A limited lifetime manufacturer warranty is included with the cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot Length:\u003c\/strong\u003e Provides reach for more flexible equipment placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS Ends:\u003c\/strong\u003e Connects compatible 1\/4-inch balanced line-level gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2534 Neglex Quad:\u003c\/strong\u003e Uses four-conductor Mogami Studio Quad cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOFC Conductors:\u003c\/strong\u003e Uses 24 AWG oxygen-free copper conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce external noise pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines four 24 AWG OFC conductors, XLPE insulation, a served bare-copper shield, and a flexible PVC jacket. Both ends terminate in straight 1\/4-inch TRS male plugs with black bodies and gold-plated contacts. The W2534 cable stock has an approximately 6.0 mm outer diameter.\u003c\/p\u003e\u003cp\u003eFor installation, connect each end to a compatible 1\/4-inch TRS balanced line-level jack, such as an interface output and powered-speaker input or a mixer and processor connection. Route the cable away from AC power cords, transformers, and high-current wiring where practical. If either device uses XLR, RCA, 3.5 mm, or another connector type, a correctly wired adapter or different cable is required.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299633222,"sku":"GOLD TRS-TRS-30","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61W1XFfYjHL.jpg?v=1784264537"},{"product_id":"mogami-gold-trs-xlrf-15-15-trs-to-xlr-female-cable","title":"Mogami GOLD TRS-XLRF-15 15' TRS-to-XLR Female Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRF-15 is a 15-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR female connector on the other. It is designed for balanced analog connections between compatible studio, stage, and powered audio equipment. Its connector combination helps bridge equipment that uses 1\/4-inch balanced line connections and XLR connections.\u003c\/p\u003e\u003cp\u003eThis cable is intended for musicians, engineers, content creators, and system installers who need a longer balanced interconnect with specific TRS-to-XLRF termination. The 15-foot length provides useful reach for equipment racks, mixers, interfaces, patching setups, and other installations where short cables are not sufficient. Confirm the connector gender and signal requirements of both devices before purchase.\u003c\/p\u003e\u003cp\u003eMogami wires this assembly with Neglex W2534 quad microphone cable, a four-conductor design used for balanced audio applications. The quad construction and served copper shield are engineered to reduce susceptibility to electromagnetic and radio-frequency interference. This makes the cable suitable for runs near power supplies, lighting equipment, and other potential noise sources.\u003c\/p\u003e\u003cp\u003eThe cable uses oxygen-free copper conductors, cross-linked polyethylene insulation, and a flexible PVC outer jacket. Gold-plated connector contacts and black connector bodies complete the assembly. The result is a durable, shielded cable intended for repeated professional audio use.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-XLRF-15 where a balanced 1\/4-inch TRS output or connection needs to mate with a male XLR connector. It can serve as part of a studio patching system, recording setup, or compatible powered-speaker accessory connection. It is a signal cable only and does not provide power, amplification, or audio conversion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-XLRF Termination:\u003c\/strong\u003e Connects a 1\/4-inch TRS female jack to a male XLR connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Foot Length:\u003c\/strong\u003e Provides added reach for equipment and patching layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce interference entering the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRF-15 uses Mogami W2534 Neglex Quad cable with oxygen-free copper conductors, cross-linked polyethylene insulation, a served bare-copper shield, and a flexible PVC jacket. The cable has a nominal 6.0 mm outer diameter and black exterior. Its black-body connectors use gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the XLR female end to a compatible 3-pin XLR male connector. This is a single-channel analog interconnect, not a speaker-power cable or a digital adapter. Route it away from AC power wiring where practical, and verify that both connected devices are designed for the intended balanced line-level connection.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300583494,"sku":"GOLD TRS-XLRF-15","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61B0dsn61xL.jpg?v=1784264554"},{"product_id":"mogami-gold-trs-xlrf-20-20-ft-trs-to-xlrf-cable","title":"Mogami GOLD TRS-XLRF-20 20-Ft TRS to XLRF Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRF-20 is a 20-foot balanced audio cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR female connector on the other. It is designed to bridge compatible balanced connections in studio, live-sound, recording-interface, and powered-speaker setups. The extended length helps place equipment farther apart while maintaining a single continuous balanced connection.\u003c\/p\u003e\u003cp\u003eThis cable is suited to users connecting gear with a balanced 1\/4-inch TRS output or input to equipment using a female XLR connection. Its connector arrangement is useful for compatible line-level audio paths, including certain mixers, processors, interfaces, monitors, and powered speakers. Verify both devices' connector gender, signal direction, and signal level before purchase.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex W2534 Studio Quad cable, a four-conductor design intended for balanced analog audio. The quad conductor geometry and spiral bare-copper shield are designed to help reduce susceptibility to electromagnetic and radio-frequency interference. This makes it a practical choice for installations where cable runs pass near power supplies, lighting, or other electronic equipment.\u003c\/p\u003e\u003cp\u003eThe cable uses XLPE conductor insulation and flexible PVC jacketing around the internal cable structure. Gold-plated connector contacts support dependable contact surfaces, while the black-bodied 1\/4-inch TRS and XLR connectors provide clear, professional-style terminations. The finished cable is shielded and uses 24 AWG conductors.\u003c\/p\u003e\u003cp\u003eAs part of a system upgrade, the GOLD TRS-XLRF-20 can replace a shorter cable or add reach between compatible balanced components. It is a single-channel cable, not a speaker cable, stereo breakout cable, or TRS-to-dual-XLR adapter. Mogami includes a lifetime warranty with this Gold-series cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides added reach for studio, stage, and equipment-rack connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRF Wiring:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and female XLR audio interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses a four-conductor cable construction for balanced audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Provides stranded oxygen-free copper conductors in the cable assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps protect the audio path from external electrical interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides gold-plated connector contact surfaces at both cable ends.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRF-20 uses black connector bodies, gold-plated contacts, flexible PVC jacketing, XLPE conductor insulation, and a served bare-copper shield. Its W2534-based quad construction contains four 24 AWG oxygen-free copper conductors and has a nominal 6.0 mm outer cable diameter. The cable is black and supplied as a finished, shielded audio interconnect.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the 3-pin female XLR end to a matching male XLR connector. Route the cable away from AC power cables and avoid tight bends, pinching, or strain on the connectors. Confirm that your equipment supports the required balanced wiring and appropriate signal level; this cable does not convert line level to microphone level or change connector gender beyond its fixed TRS-male-to-XLR-female format.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300747334,"sku":"GOLD TRS-XLRF-20","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61B0dsn61xL_58bea519-36dd-435d-af86-f3dca186ec4f.jpg?v=1784264572"},{"product_id":"mogami-gold-trs-xlrm-03-3-trs-to-xlr-male-cable","title":"Mogami GOLD TRS-XLRM-03 3' TRS To XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-03 is a 3-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It provides a direct physical connection between equipment using these two connector formats. Its short length is useful where nearby components need a tidy, purpose-built interconnect.\u003c\/p\u003e\u003cp\u003eThis cable is intended for balanced audio signal routing in studio, live-sound, broadcast, and powered-speaker setups. It is suited to users connecting compatible TRS and female XLR ports without relying on separate adapters. Confirm both the connector gender and the signal requirements of the equipment before installation.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-XLRM-03 uses Mogami Neglex Studio Quad 2534 cable, a four-conductor design made for balanced audio applications. Its quad construction and served bare-copper shield are designed to help reduce susceptibility to electromagnetic and radio-frequency interference. This makes it a practical choice for signal paths installed near power supplies, lighting equipment, or other electronics.\u003c\/p\u003e\u003cp\u003eEach end uses a black-body connector with gold-plated contacts. The cable uses 24 AWG oxygen-free copper conductors with XLPE insulation and a flexible PVC jacket. These materials support a compact, shielded cable assembly for routine professional audio use.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-XLRM-03 where a 3-foot run is sufficient between compatible balanced TRS and XLR equipment. It can serve as part of an interface, mixer, processor, monitor, or patching setup where a male XLR termination is required. The included cable is backed by a limited lifetime manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRM Connection:\u003c\/strong\u003e Links a 1\/4-inch TRS male plug to a 3-pin XLR male plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot Length:\u003c\/strong\u003e Supports short, organized equipment-to-equipment audio runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex 2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Uses oxygen-free copper conductors in the cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Adds shielding against electromagnetic and radio-frequency interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines a flexible black PVC jacket, XLPE conductor insulation, oxygen-free copper conductors, and a served bare-copper shield. Its black-body 1\/4-inch TRS and 3-pin XLR male connectors use gold-plated contacts. The cable assembly is shielded and uses Mogami Neglex Studio Quad 2534 construction.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible TRS jack and the XLR male end to a compatible female XLR jack. The cable is 3 feet long, so it is best used between nearby components rather than across a room or vehicle. Check connector gender, port type, and the equipment's signal-level requirements before connecting devices.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300911174,"sku":"GOLD TRS-XLRM-03","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL.jpg?v=1784264589"},{"product_id":"mogami-gold-trs-xlrm-10-10-trs-to-xlr-male-cable","title":"Mogami GOLD TRS-XLRM-10 10' TRS to XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-10 is a 10-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It is intended for balanced analog signal routing where equipment uses different connector formats. The cable provides a direct connection without relying on separate adapters.\u003c\/p\u003e\u003cp\u003eThis cable is suited to studio, live-sound, broadcast, and powered-speaker setups with compatible balanced TRS and XLR connections. It can be used to link gear such as mixers, audio interfaces, patch bays, signal processors, and monitor systems. Both ends are male, so the connected equipment must provide matching female inputs or outputs.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex Quad 2534 cable, a four-conductor design used for balanced audio applications. Its quad construction and served copper shield are designed to help reduce the pickup of electromagnetic interference around audio equipment. This makes it a practical choice for organized signal routing in electrically busy setups.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used at the TRS and XLR terminations, while the connectors use black bodies. The cable has a flexible PVC outer jacket and a nominal 6.0 mm outside diameter. Its 24 AWG oxygen-free-copper conductors balance compact handling with professional audio-cable construction.\u003c\/p\u003e\u003cp\u003eThe 10-foot length is useful when components are separated by a rack, desk, speaker stand, or console position. It is a single-channel cable rather than a stereo pair or multi-channel snake. Use it where the destination and source are designed for compatible balanced TRS-to-XLR signal wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRM Wiring:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and XLR female ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides added reach for studio and system routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad 2534 Cable:\u003c\/strong\u003e Uses four conductors for balanced analog audio cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Provides stranded oxygen-free-copper signal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Helps limit interference pickup in demanding installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold-plated connector contacts complete both cable ends.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRM-10 uses Mogami Neglex Quad 2534 cable with XLPE conductor insulation, a served shield, and a flexible PVC jacket. The finished cable is black and has black-body connectors with gold-plated contacts. Its nominal cable outside diameter is 6.0 mm.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male plug to a compatible female balanced TRS jack and the XLR male end to a compatible female XLR connector. Confirm that the source, destination, signal level, and balanced wiring are appropriate for the equipment before installation. Route the cable away from power wiring where practical and avoid sharply bending or crushing the cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301009478,"sku":"GOLD TRS-XLRM-10","price":95.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL_7ab87d2c-7389-405a-a9e3-aa47cb55779f.jpg?v=1784264603"},{"product_id":"mogami-gold-trs-xlrm-20-20-trs-to-xlrm-patch-cable","title":"Mogami GOLD TRS-XLRM-20 20' TRS-to-XLRM Patch Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-20 is a 20-foot balanced patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It is designed to link compatible balanced audio equipment that uses these two connector formats. The extended length is useful when equipment needs to be positioned farther apart without adding couplers or extensions.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio, recording, live-sound, and powered-speaker setups using balanced line connections. It can help simplify connections between compatible mixers, interfaces, processors, monitor controllers, powered speakers, and other professional audio equipment. Connector type, signal level, and pinout should be verified on both devices before use.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex W2534 Quad high-definition microphone cable. Its four-conductor quad construction and served copper shield are designed to support balanced signal transmission in environments where electromagnetic or radio-frequency interference may be present. The cable uses oxygen-free copper conductors and a flexible PVC outer jacket.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used at both the 1\/4-inch TRS and XLR male terminations. The black-body, straight connectors provide a conventional, practical format for patching compatible gear. XLPE conductor insulation is used within the W2534 cable construction.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-XLRM-20 fits into systems that need a direct balanced TRS-to-XLR male cable rather than an adapter plus a separate cable. Its 20-foot reach supports organized routing between racks, workstations, stage equipment, and powered speakers. Mogami includes a lifetime warranty with this Gold-series cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-XLRM Terminations:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and 3-pin XLR male interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides extended reach for equipment placement and cable routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Quad Construction:\u003c\/strong\u003e Uses four conductors for balanced audio signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Cable:\u003c\/strong\u003e Uses Mogami's quad high-definition microphone cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold contact plating is used at both connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Served bare-copper shielding supports noise-resistant cable construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRM-20 uses flexible PVC jacketing around W2534 Neglex Quad cable, with XLPE conductor insulation and a served bare-copper shield. Its four 24 AWG oxygen-free copper conductors are arranged in a quad configuration. Both ends use straight, black-body connectors with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eUse this cable only where a balanced 1\/4-inch TRS male connection and a 3-pin XLR male connection are appropriate for the connected equipment. Route the cable away from AC power cords, power supplies, and areas where it may be pinched or repeatedly stressed. Do not use it as a speaker cable for passive speakers, and confirm the required connector gender and signal level before purchase.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301238854,"sku":"GOLD TRS-XLRM-20","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL_f9b4d62c-1a5c-4020-b43f-ae8a9d3a70a6.jpg?v=1784264623"},{"product_id":"roland-rcc-10-tr2r-10-foot-1-4-inch-trs-to-dual-rca-cable","title":"Roland RCC-10-TR2R 10-Foot 1\/4-Inch TRS to Dual RCA Cable","description":"\u003cp\u003eThe Roland RCC-10-TR2R is a Black Series insert\/splitter cable with one 1\/4-inch TRS male connector and two RCA male connectors. Its 10-foot length supports clean, practical connections between compatible audio components with differing connector formats. It is intended for signal-routing tasks in music, DJ, studio, and other line-level audio setups.\u003c\/p\u003e\u003cp\u003eThis cable is suited to users who need to break out the conductors of a 1\/4-inch TRS connection to separate RCA connections. It can be useful when integrating effects processors, mixers, instruments, playback equipment, or other compatible gear. Confirm the connector type and signal-routing requirements of both devices before installation.\u003c\/p\u003e\u003cp\u003eRoland uses multi-strand, oxygen-free copper core wire in the Black Series construction. High-density spiral copper shielding is designed to help protect the audio signal from interference. The low-capacitance cable design supports wide frequency reproduction and dynamic response.\u003c\/p\u003e\u003cp\u003eHeavy-duty connectors give the RCC-10-TR2R a dependable physical connection point for routine setup and teardown. The cable has straight male connectors at both ends, with a single TRS plug at one end and two RCA plugs at the other. Its black finish helps it blend into most audio rigs and equipment installations.\u003c\/p\u003e\u003cp\u003eAs a passive interconnect cable, the RCC-10-TR2R does not add amplification, wireless functionality, or audio processing. Instead, it serves as a connection link within a compatible audio system. It is a focused option for installations that specifically require a 1\/4-inch TRS-to-dual-RCA insert\/splitter format.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-RCA Split:\u003c\/strong\u003e Connects one 1\/4-inch TRS plug to two RCA plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides 10 feet of routing flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen-Free Copper Core:\u003c\/strong\u003e Uses multi-strand copper conductor wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shielding:\u003c\/strong\u003e Helps reduce interference around audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Capacitance Design:\u003c\/strong\u003e Supports full-frequency signal transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Connectors:\u003c\/strong\u003e Built for reliable repeated equipment connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RCC-10-TR2R uses multi-strand oxygen-free copper core wire, high-density spiral copper shielding, and heavy-duty connectors. Its straight connector layout consists of one male 1\/4-inch TRS plug and two male RCA plugs. The cable is finished in black and is part of Roland's Black Series interconnect cable range.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS end to a compatible TRS jack and the two RCA ends to the corresponding RCA connections on compatible equipment. Keep the cable separated from AC power wiring where practical, avoid sharply bending the cable near its connectors, and verify device manuals for correct insert, send\/return, or stereo routing. This cable is for analog audio interconnection and does not replace an adapter, converter, or powered signal interface where one is required.\u003c\/p\u003e","brand":"Roland","offers":[{"title":"Default Title","offer_id":45669328453702,"sku":"RCC-10-TR2R","price":14.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81YynajWK0L.jpg?v=1784491022"}],"url":"https:\/\/audiowatt.store\/collections\/patch-cables.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}