{"title":"Ortofon","description":null,"products":[{"product_id":"ortofon-cc-elite-concorde-elite-turntable-cartridge","title":"Ortofon CC-ELITE Concorde Elite Turntable Cartridge","description":"\u003cp\u003eThe Ortofon CC-ELITE Concorde Elite is a moving-magnet turntable cartridge designed for vinyl listeners and DJs who prioritize detailed record playback. Its integrated Concorde-style body mounts to compatible Bayonet\/SME tonearms without conventional cartridge mounting screws. The cartridge includes a Nude Elliptical diamond stylus and is intended for stereo record playback.\u003c\/p\u003e\u003cp\u003eThe Elite uses a Nude Elliptical diamond tip to trace record grooves with a lower moving mass than bonded stylus designs. This profile is engineered to retrieve fine groove information across its specified 20 Hz to 20,000 Hz frequency range. Ortofon specifies the stylus for listening use rather than heavy back-cueing or scratching.\u003c\/p\u003e\u003cp\u003eA specially developed coil system produces an 8.5 mV output at 1 kHz and 5 cm\/sec., supporting strong signal delivery into a compatible moving-magnet phono input. Channel separation is rated at 25 dB at 1 kHz, while channel balance is specified at 1 dB. These specifications make it a practical choice for a system built around a 47 kOhm MM phono stage.\u003c\/p\u003e\u003cp\u003eThe cartridge combines a rigid 750 µm aluminum-magnesium cantilever with a purpose-developed rubber suspension. This assembly is designed to maintain stable tracing of groove modulation, with a specified tracking ability of 100 µm at 315 Hz. Its recommended tracking force is 3.0 g, within an approved 2.0 to 4.0 g range.\u003c\/p\u003e\u003cp\u003eThe Concorde Elite is a direct upgrade path for turntables using an SME\/bayonet tonearm connection. Its black and gold body uses a specially molded stylus housing with genuine gold plating. With a 52 mm cartridge length and 13.5 mm stylus-tip-to-bayonet-center height, it follows the Concorde MkII physical format.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoving-Magnet Design:\u003c\/strong\u003e Provides 8.5 mV output for compatible MM phono inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNude Elliptical Stylus:\u003c\/strong\u003e Tracks fine groove detail for focused stereo playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum-Magnesium Cantilever:\u003c\/strong\u003e Rigid 750 µm design supports stable signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Rubber Suspension:\u003c\/strong\u003e Supports controlled tracking and damping characteristics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBayonet\/SME Mount:\u003c\/strong\u003e Fits compatible tonearms without standard cartridge screw mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Stylus Body:\u003c\/strong\u003e Adds a black-and-gold finish to the molded housing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CC-ELITE uses a black cartridge body and a specially molded black-and-gold stylus assembly with genuine gold plating. Its Nude Elliptical diamond is fitted to a rigid aluminum-magnesium cantilever, while the cartridge employs a dedicated rubber suspension and coil system. The complete cartridge weighs 18.5 g excluding screws.\u003c\/p\u003e\u003cp\u003eInstall the cartridge only on a turntable tonearm with a compatible Bayonet\/SME connection, then set tracking force to the recommended 3.0 g and confirm tonearm setup. Match it with a moving-magnet phono input or phono preamp specified for a 47 kOhm load resistance and 150 to 400 pF load capacitance. For replacement, use the Ortofon Stylus CC MKII Elite.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669414338630,"sku":"CC-ELITE","price":461.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61l0jNxp4bL.jpg?v=1784500094"},{"product_id":"ortofon-cc-mk2-club-single-concorde-mkii-club-cartridge","title":"Ortofon CC-MK2 CLUB SINGLE Concorde MKII Club Cartridge","description":"\u003cp\u003eThe Ortofon Concorde MKII Club Single is a DJ turntable cartridge designed for detailed traditional vinyl playback. It combines an integrated Concorde-style body with a pre-mounted stylus, simplifying installation on compatible tonearms. This single-cartridge package is suited to DJs, vinyl listeners, and users transferring records to digital formats.\u003c\/p\u003e\u003cp\u003eThe Club model uses a Special Elliptical diamond stylus to trace record grooves with greater contact area than a spherical tip. This profile is designed to retrieve fine musical detail and maintain a clear, articulate presentation. It is intended for normal playback as well as lighter back-cueing and scratching techniques.\u003c\/p\u003e\u003cp\u003eAn 8 mV output voltage gives the cartridge a strong signal for phono preamps and DJ mixers. The higher output can reduce the amount of gain required from the preamp stage. Ortofon also specifies this design for use in studio, broadcast, club, archival, and sampling applications.\u003c\/p\u003e\u003cp\u003eIts aluminum cantilever supports a Special Elliptical stylus with a 13\/25 μm tip radius. The cartridge is specified for a 20 Hz to 20 kHz frequency range and 25 dB channel separation at 1 kHz. With a recommended tracking force of 3 g, it is engineered for stable playback within its stated operating range.\u003c\/p\u003e\u003cp\u003eThe Concorde MKII format mounts directly to turntables equipped with a compatible bayonet-style removable headshell connection, so no separate headshell wiring is needed. It is a practical upgrade for a DJ setup where sound detail and a high-output phono signal matter. When the stylus reaches the end of its service life, the compatible Stylus CC MKII Club replacement is available separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Elliptical Stylus:\u003c\/strong\u003e Retrieves detailed information from record grooves for focused vinyl playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 mV Output:\u003c\/strong\u003e Provides a strong signal to compatible phono preamps and mixers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Concorde Mount:\u003c\/strong\u003e Fits compatible turntables with removable bayonet-style headshell connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cantilever:\u003c\/strong\u003e Supports accurate stylus movement during record playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 g Recommended Tracking Force:\u003c\/strong\u003e Establishes the intended setup point for stable tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Accepts the Stylus CC MKII Club replacement stylus.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Concorde MKII Club has an integrated cartridge-and-mount form factor with an 18.5 g cartridge weight. Its aluminum cantilever carries a Special Elliptical diamond stylus, while the MKII design includes a large stylus viewing cutout for clearer needle placement. The finger lift is a separate, replaceable, and interchangeable component.\u003c\/p\u003e\u003cp\u003eInstall the cartridge by attaching its bayonet connector to a compatible removable-headshell tonearm, then balance the tonearm and set tracking force within the specified 2 to 4 g range; Ortofon recommends 3 g. Use it with a phono input or external phono preamp having the stated 47 kOhm load resistance and 200 to 600 pF load capacitance. Keep the stylus tip clean and replace it with the dedicated Stylus CC MKII Club when needed.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669414469702,"sku":"CC-MK2 CLUB SINGLE","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61gDBghGa3L.jpg?v=1784500132"},{"product_id":"ortofon-cc-mk2-club-twin-concorde-mkii-club-twin-cartridges","title":"Ortofon CC-MK2 CLUB TWIN Concorde MKII Club Twin Cartridges","description":"\u003cp\u003eThe Ortofon CC-MK2 CLUB TWIN is a matched pair of Concorde MKII Club DJ cartridges for turntables with removable headshell connections. It gives DJs two ready-to-use cartridges for stereo playback or dual-turntable setups. The package is also suited to vinyl archiving, sampling, studio playback, and broadcast-oriented use.\u003c\/p\u003e\u003cp\u003eEach cartridge uses a Special Elliptical diamond stylus designed to trace record grooves with more contact area than a spherical stylus. This profile is intended to retrieve fine musical detail during conventional vinyl playback. It is a practical choice for DJs who prioritize sound quality while using lighter back-cueing and scratching techniques.\u003c\/p\u003e\u003cp\u003eAn 8 mV output voltage provides a comparatively strong phono signal for compatible DJ mixers and phono preamps. This can reduce the amount of preamp gain needed in a system. Ortofon also identifies the higher output as useful for helping reduce susceptibility to feedback in live environments.\u003c\/p\u003e\u003cp\u003eThe Concorde MKII form factor integrates the cartridge and headshell-style connection into one assembly. It mounts directly to a compatible removable-headshell tonearm, eliminating separate cartridge mounting hardware and alignment steps. Set tracking force within the specified 2 to 4 g range, with 3 g recommended.\u003c\/p\u003e\u003cp\u003eThis Twin package supports a complete two-turntable setup and includes preinstalled styli on both cartridges. The cartridges can be stored and transported in the supplied flight case between sessions or performances. When replacement is needed, use the designated Stylus CC MKII Club replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin Cartridge Set:\u003c\/strong\u003e Includes two Concorde MKII Club cartridges for stereo DJ setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Elliptical Stylus:\u003c\/strong\u003e Tracks grooves with a detailed, playback-focused stylus profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 mV Output:\u003c\/strong\u003e Supplies a strong signal to compatible phono inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Concorde Mounting:\u003c\/strong\u003e Connects to compatible removable-headshell DJ tonearms without separate alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 g Recommended Force:\u003c\/strong\u003e Provides the manufacturer-recommended tracking-force target for normal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Carry Case:\u003c\/strong\u003e Includes a flight case for organized storage and transport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach Concorde MKII Club cartridge combines a 18.5 g cartridge body with an aluminum cantilever and Special Elliptical diamond stylus. The integrated Concorde design places the cartridge in a single direct-mount assembly for compatible removable-headshell tonearms. The Twin set includes stylus protection guards and a dust brush, helping protect the stylus assemblies during storage and routine care.\u003c\/p\u003e\u003cp\u003eInstall each cartridge on a compatible turntable tonearm with a removable headshell connection, then balance the tonearm and set tracking force within the 2 to 4 g specified range. Ortofon recommends 3 g tracking force for the Club stylus. Keep the stylus guard fitted when mounting or removing the cartridge, and clean the stylus gently from the rear toward the tip with a suitable brush.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669415125062,"sku":"CC-MK2 CLUB TWIN","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ific06lnL.jpg?v=1784500176"},{"product_id":"ortofon-cc-mk2-digital-single-concorde-mk2-dj-cartridge","title":"Ortofon CC-MK2 DIGITAL SINGLE Concorde MK2 DJ Cartridge","description":"\u003cp\u003eThe Ortofon Concorde MK2 Digital is a single DJ phono cartridge designed for timecode-vinyl playback. It is intended for DJs using digital vinyl systems that rely on a clean, consistent control signal from the record. Its Concorde-format body combines the cartridge and stylus into a direct-mount assembly for compatible tonearms.\u003c\/p\u003e\u003cp\u003eThis cartridge is optimized for timecoded vinyl, where signal stability can affect software decoding performance. Its 10 mV output is designed to provide a strong signal to the connected DJ software system. Ortofon also specifies the Concorde MK2 Digital for conventional vinyl playback.\u003c\/p\u003e\u003cp\u003eThe Concorde MK2 Digital uses a spherical diamond stylus on an aluminum cantilever. Its specified frequency range is 20 Hz to 18 kHz at -3 dB, with 22 dB channel separation at 1 kHz. The spherical stylus profile and 3 to 5 g tracking-force range suit DJ-oriented handling and playback applications.\u003c\/p\u003e\u003cp\u003eFor setup, the recommended tracking force is 4 g. The cartridge is rated for 100 µm tracking ability at 315 Hz when used at the recommended tracking force. Its 18.5 g cartridge weight should be considered when balancing the tonearm and setting tracking force.\u003c\/p\u003e\u003cp\u003eThe Concorde MK2 Digital mounts through a Bayonet\/SME-style connection on a compatible tonearm, so no separate headshell wiring or cartridge alignment is required for that mounting format. It is supplied as a single cartridge with its stylus pre-mounted. When replacement is needed, it accepts the Ortofon Stylus CC MKII Digital replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimecode Optimization:\u003c\/strong\u003e Designed to support timecode-vinyl playback and reduce decoding errors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mV Output:\u003c\/strong\u003e Delivers a high output level to the connected system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Uses a spherical diamond tip for DJ playback applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cantilever:\u003c\/strong\u003e Supports the stylus assembly with a specified aluminum cantilever.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBayonet\/SME Mount:\u003c\/strong\u003e Installs directly on compatible removable-headshell tonearms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Uses the Stylus CC MKII Digital replacement stylus.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Concorde MK2 Digital uses an integrated Concorde-style cartridge body with an aluminum cantilever and spherical diamond stylus. This one-piece format is designed for Bayonet\/SME tonearm connections and has a specified cartridge weight of 18.5 g. The stylus is pre-mounted on the single-cartridge assembly.\u003c\/p\u003e\u003cp\u003eMount the cartridge only to a compatible Bayonet\/SME tonearm connection, then balance the tonearm and set tracking force within the specified 3 to 5 g range; Ortofon recommends 4 g. No separate cartridge alignment is required with the Concorde direct-mount format. Keep the stylus guard fitted while mounting or removing the cartridge, and clean the stylus carefully from rear to front with a suitable stylus brush.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669415452742,"sku":"CC-MK2 DIGITAL SINGLE","price":170.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ptvpwp_aL.jpg?v=1784500242"},{"product_id":"ortofon-cc-mk2-digital-twin-dj-cartridge-twin-pack","title":"Ortofon CC-MK2 DIGITAL TWIN DJ Cartridge Twin Pack","description":"\u003cp\u003eThe Ortofon Concorde MK2 Digital Twin is a two-cartridge DJ package designed for timecode vinyl and digital vinyl system use. Each Concorde cartridge arrives with its stylus preinstalled, providing a practical matched pair for a two-turntable DJ setup. The included flight case helps keep the cartridges protected between performances and sessions.\u003c\/p\u003e\u003cp\u003eThis model is intended for DJs who use control vinyl with compatible DJ software and want a strong, clean timecode signal. Its 10 mV output voltage is optimized to maximize the signal-to-noise ratio delivered to the software. Ortofon also designs the Digital model to reduce decoding errors and help extend the usable life of timecode records.\u003c\/p\u003e\u003cp\u003eThe Concorde MK2 Digital uses a spherical diamond stylus on an aluminum cantilever. Its specified frequency range is 20 Hz to 18 kHz, and it is also suitable for playing conventional vinyl records. With 22 dB channel separation at 1 kHz, it provides distinct left- and right-channel performance for DJ playback.\u003c\/p\u003e\u003cp\u003eEach cartridge has a recommended tracking force of 4 g, within a 3 to 5 g operating range. The 18.5 g cartridge weight and 100 μm tracking ability at 315 Hz support the controlled cueing and playback demands associated with DJ use. Dynamic lateral compliance is rated at 14 μm\/mN.\u003c\/p\u003e\u003cp\u003eThe integrated Concorde body is made for direct installation on turntables using an SME\/bayonet-style removable headshell connection. This twin package is a straightforward choice for replacing both cartridges in a compatible DVS-oriented turntable system. When the stylus eventually needs replacement, it uses the designated Stylus CC MKII Digital replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatched Twin Pack:\u003c\/strong\u003e Includes two Concorde MK2 Digital cartridges with preinstalled styli.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimecode Optimization:\u003c\/strong\u003e Designed to help reduce timecode decoding errors during DVS use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mV Output:\u003c\/strong\u003e Supplies a high output level for a strong software input signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Uses an R 18 μm spherical diamond stylus tip.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cantilever:\u003c\/strong\u003e Provides the cantilever material specified for the Digital stylus assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSME\/Bayonet Mount:\u003c\/strong\u003e Fits compatible DJ turntables with removable headshell connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Concorde MK2 Digital combines the cartridge body and headshell interface in one integrated design. Each cartridge uses an aluminum cantilever and spherical diamond stylus, while the twin set is supplied in a protective flight case. Two stylus protection guards and a dust brush are included with the package.\u003c\/p\u003e\u003cp\u003eInstall each cartridge directly onto a compatible SME\/bayonet-style tonearm connection, then set tracking force within the specified 3 to 5 g range; Ortofon recommends 4 g. Use the pair with two compatible DJ turntables when a matched left and right deck setup is desired. For future maintenance, replace worn styli with Stylus CC MKII Digital replacements.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669415616582,"sku":"CC-MK2 DIGITAL TWIN","price":345.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61bjuo8k37L.jpg?v=1784500280"},{"product_id":"ortofon-cc-mk2-dj-single-concorde-mkii-dj-cartridge","title":"Ortofon CC-MK2 DJ SINGLE Concorde MKII DJ Cartridge","description":"\u003cp\u003eThe Ortofon Concorde MKII DJ is a single moving-magnet DJ cartridge with a pre-mounted stylus for turntables using a compatible bayonet\/SME tonearm connection. It is designed for DJs who need dependable cueing, mixing, back-cueing, and scratching performance without mounting a separate cartridge to a headshell. Its integrated Concorde-format body provides a direct, practical connection to compatible DJ turntables.\u003c\/p\u003e\u003cp\u003eThis model is intended as an all-purpose option for a wide range of music styles and DJ techniques. A spherical diamond stylus and aluminum cantilever are selected for stable groove contact and rugged day-to-day use. The cartridge is specified for 100 µm tracking ability at 315 Hz when set to its recommended tracking force.\u003c\/p\u003e\u003cp\u003eThe Concorde MKII DJ delivers a 6 mV output at 1 kHz and 5 cm\/sec, making it appropriate for phono inputs used in typical DJ mixers and turntable systems. Its 20 Hz to 20 kHz frequency range and 22 dB channel separation at 1 kHz support clear stereo playback. The recommended 4 g tracking force is tailored to its stated DJ-use performance characteristics.\u003c\/p\u003e\u003cp\u003eOrtofon uses an aluminum cantilever with a spherical diamond tip rated at an R 18 µm radius. This configuration emphasizes reliable groove handling for common DJ tasks, including back-cueing and scratch-oriented operation. The cartridge is also designed to maintain low record wear when correctly installed and adjusted.\u003c\/p\u003e\u003cp\u003eFor a straightforward upgrade, the integrated bayonet\/SME mount eliminates the need for cartridge screws, headshell leads, or alignment hardware on compatible tonearms. The Stylus CC MKII DJ is available as the designated replacement stylus. A single cartridge is included, so a second matching cartridge is needed for two-turntable stereo DJ setups.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Concorde Mount:\u003c\/strong\u003e Connects directly to compatible bayonet\/SME DJ tonearms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Supports durable tracking for DJ record handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mV Output:\u003c\/strong\u003e Provides a strong moving-magnet phono signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 g Recommended Tracking Force:\u003c\/strong\u003e Optimized for the cartridge's specified groove handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cantilever:\u003c\/strong\u003e Provides a rigid platform for the stylus assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Uses the dedicated Stylus CC MKII DJ replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Concorde MKII DJ combines the cartridge body, tonearm connector, and stylus assembly into one purpose-built DJ format. Its aluminum cantilever carries a spherical diamond stylus with an R 18 µm tip radius, while the cartridge body weighs 18.5 g. The integrated design is made for direct handling and installation on compatible DJ tonearms.\u003c\/p\u003e\u003cp\u003eInstall the cartridge only on a turntable tonearm with a compatible bayonet\/SME connection, then set the tracking force within the specified 3 to 5 g range; Ortofon recommends 4 g. Connect the turntable to a phono input with a 47 kOhm load resistance and 200 to 600 pF load capacitance. For a two-deck DJ system, use a second matching cartridge to maintain consistent output and tracking characteristics between turntables.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669415780422,"sku":"CC-MK2 DJ SINGLE","price":147.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TXa8K8u0L.jpg?v=1784500317"},{"product_id":"ortofon-cc-mk2-dj-twin-concorde-mk2-dj-twin-cartridges","title":"Ortofon CC-MK2 DJ TWIN Concorde MK2 DJ Twin Cartridges","description":"\u003cp\u003eThe Ortofon Concorde MK2 DJ Twin is a matched two-cartridge package for DJs who use turntables with Bayonet\/SME-style removable headshell connections. Each Concorde MK2 DJ cartridge arrives with its stylus preinstalled, providing a direct-mount solution for two-turntable DJ setups. The included flight case keeps both cartridges together for transport and storage.\u003c\/p\u003e\u003cp\u003eThis model is intended for DJs who need dependable vinyl playback while cueing, back-cueing, and performing scratch-oriented techniques. Its spherical diamond stylus and 3 to 5 g tracking-force range are designed around stable groove contact in demanding DJ use. The recommended tracking force is 4 g.\u003c\/p\u003e\u003cp\u003eThe Concorde MK2 DJ uses a 6 mV output at 1 kHz, 5 cm\/sec, helping it provide a strong signal to a compatible phono input or DJ mixer. Its specified frequency range is 20 Hz to 20 kHz at -3 dB. Channel separation is rated at 22 dB at 1 kHz for defined left\/right playback.\u003c\/p\u003e\u003cp\u003eOrtofon builds the Concorde MK2 DJ around an aluminum cantilever and spherical R 18 μm diamond stylus. Dynamic lateral compliance is specified at 14 μm\/mN, while tracking ability is rated at 100 μm at 315 Hz. These characteristics support controlled playback for general DJ performance and record handling.\u003c\/p\u003e\u003cp\u003eThe Twin package is a practical upgrade for a pair of compatible DJ turntables, eliminating the need to buy two individual cartridge assemblies separately. The Concorde body mounts directly to a compatible tonearm without cartridge alignment. When replacement is needed, the designated Stylus CC MKII DJ is the specified replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin Cartridge Package:\u003c\/strong\u003e Includes two Concorde MK2 DJ cartridges for a two-turntable setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreinstalled Styli:\u003c\/strong\u003e Both cartridges arrive with their DJ styli already fitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mV Output:\u003c\/strong\u003e Provides a substantial cartridge output at the specified test level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Uses an R 18 μm spherical diamond tip for DJ playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cantilever:\u003c\/strong\u003e Provides a rigid cantilever structure for stylus support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBayonet\/SME Mounting:\u003c\/strong\u003e Fits compatible tonearms with a removable Bayonet\/SME connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach cartridge has Ortofon's integrated Concorde-style body, with an aluminum cantilever and spherical diamond stylus. The Twin package includes two complete cartridge-and-stylus assemblies housed in a flight case. Each cartridge weighs 18.5 g.\u003c\/p\u003e\u003cp\u003eMount each cartridge directly onto a compatible Bayonet\/SME tonearm connection; Ortofon specifies that no alignment is required for the Concorde mounting system. Set tracking force within the 3 to 5 g range, using 4 g as the recommended setting. Keep the stylus guard fitted while mounting or removing the cartridge, and clean the stylus by brushing from the rear toward the stylus tip.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669415813190,"sku":"CC-MK2 DJ TWIN","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/611U3yW4jhL.jpg?v=1784500361"},{"product_id":"ortofon-cc-mk2-mix-single-concorde-mk2-dj-cartridge","title":"Ortofon CC-MK2 MIX SINGLE Concorde MK2 DJ Cartridge","description":"\u003cp\u003eThe Ortofon Concorde MK2 MIX is a single DJ phono cartridge designed for turntables using a bayonet\/SME-style removable headshell connection. It provides a direct-mount cartridge option for DJs who need dependable playback for mixing, scratch routines, and back-cueing. The single version includes the cartridge and its pre-mounted stylus.\u003c\/p\u003e\u003cp\u003eThis model is suited to DJs building a first turntable setup, replacing a worn cartridge, or maintaining a matching backup for a compatible deck. Its spherical diamond stylus is intended for general DJ use and supports the handling demands associated with cueing and record manipulation. The recommended tracking force is 3 g, within a specified range of 2 to 4 g.\u003c\/p\u003e\u003cp\u003eThe Concorde MK2 MIX has a 6 mV output voltage, helping it deliver a usable signal level into compatible phono-stage inputs. Ortofon specifies 20 dB channel separation at 1 kHz and a 20 Hz to 20 kHz frequency range at -3 dB. Its sound character is designed around balanced, transparent playback and practical tracking ability.\u003c\/p\u003e\u003cp\u003eAn aluminum cantilever supports the spherical diamond stylus, which has an R 18 µm tip radius. Ortofon specifies tracking ability of 100 µm at 315 Hz when used at the recommended tracking force. Dynamic lateral compliance is rated at 14 µm\/mN.\u003c\/p\u003e\u003cp\u003eFor a compatible DJ system, the cartridge mounts directly to a bayonet\/SME tonearm connection without conventional cartridge alignment. Match the turntable tonearm's counterweight to the recommended 3 g tracking force before use. When the stylus eventually needs replacement, the designated Stylus CC MKII Mix is available separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcorde Direct Mount:\u003c\/strong\u003e Fits compatible bayonet\/SME removable-headshell tonearms without conventional alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Supports general DJ playback, scratch use, and back-cueing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mV Output:\u003c\/strong\u003e Provides a practical output level for compatible phono inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cantilever:\u003c\/strong\u003e Provides a solid support structure for the stylus assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 µm Tracking Ability:\u003c\/strong\u003e Helps the stylus maintain groove contact during DJ handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Uses the separately available Stylus CC MKII Mix replacement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Concorde MK2 MIX combines an integrated Concorde-format cartridge body with an aluminum cantilever and spherical diamond stylus. Its 18.5 g cartridge weight and bayonet\/SME mounting format are designed for compatible DJ tonearms. The stylus tip has an R 18 µm radius.\u003c\/p\u003e\u003cp\u003eInstall the cartridge by mounting it directly to a compatible bayonet\/SME tonearm connection, keeping the stylus guard in place during mounting or removal. No conventional alignment is required for this Concorde mounting format. Set the tonearm tracking force to the recommended 3 g setting and stay within the specified 2 to 4 g range.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669417844806,"sku":"CC-MK2 MIX SINGLE","price":111.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71cb539SGrL.jpg?v=1784500400"},{"product_id":"ortofon-cc-mk2-mix-twin-concorde-dj-cartridge-twin-pack","title":"Ortofon CC-MK2 MIX TWIN Concorde DJ Cartridge Twin Pack","description":"\u003cp\u003eThe Ortofon Concorde MK2 MIX Twin is a two-cartridge DJ package for turntables using a removable bayonet\/SME-style headshell mount. Each Concorde cartridge arrives with its stylus installed, making this set suited to DJs setting up a pair of compatible turntables. It is designed for general DJ playback, mixing, scratch work, and back-cueing.\u003c\/p\u003e\u003cp\u003eThe MIX model uses a spherical diamond stylus and aluminum cantilever for durable groove contact and dependable handling. Its 6 mV output is intended for connection to a standard moving-magnet phono input with a 47 kOhm load. The sound character is designed for transparent, full-spectrum playback rather than specialized audiophile listening.\u003c\/p\u003e\u003cp\u003eFor performance use, the cartridge has a recommended tracking force of 3 g and a usable range of 2 to 4 g. Its 100 μm tracking ability at the recommended force supports stable playback during cueing and routine DJ handling. Proper tracking-force setup is important for maintaining groove contact and minimizing unnecessary record or stylus wear.\u003c\/p\u003e\u003cp\u003eThe Concorde body combines the cartridge and headshell into one direct-mount assembly. This bayonet-style format eliminates the separate cartridge-to-headshell mounting process required by conventional headshell cartridges. Ortofon specifies that no cartridge alignment is required when mounting the Concorde on a compatible tonearm.\u003c\/p\u003e\u003cp\u003eThis Twin package is a practical replacement or upgrade path for DJs using two compatible decks. It includes two Concorde MK2 MIX cartridges, two stylus protection guards, a dust brush, and an aluminum flight case. When the original styli eventually wear, each cartridge accepts the Ortofon Stylus CC MKII Mix replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin Cartridge Set:\u003c\/strong\u003e Provides two matching Concorde MK2 MIX cartridges for a two-turntable DJ setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Supports general-purpose DJ playback, scratch work, and back-cueing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mV Output:\u003c\/strong\u003e Delivers a suitable signal level for standard moving-magnet phono inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bayonet Mount:\u003c\/strong\u003e Fits compatible removable-headshell tonearms without separate cartridge screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 g Recommended Tracking Force:\u003c\/strong\u003e Balances groove handling and intended operating performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus Assembly:\u003c\/strong\u003e Supports maintenance with the Stylus CC MKII Mix replacement stylus.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach Concorde MK2 MIX combines a cartridge body with an integrated bayonet-mount housing, with an aluminum cantilever supporting the spherical diamond stylus. The 18.5 g cartridge weight and integrated form factor are designed for compatible DJ turntable tonearms. The included flight case provides organized storage for the pair, while the stylus guards help protect the tips when the cartridges are not in use.\u003c\/p\u003e\u003cp\u003eInstall each cartridge by attaching it directly to a compatible bayonet\/SME-style tonearm connection, with the stylus guard fitted during mounting or removal. No separate cartridge alignment is required, but the tonearm counterweight should be adjusted to the specified 3 g tracking force and kept within the 2 to 4 g range. Use the supplied brush carefully from the rear of the cartridge toward the stylus tip, and avoid solvents when cleaning the stylus or records.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669417943110,"sku":"CC-MK2 MIX TWIN","price":230.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51K2g6IXUDL.jpg?v=1784500442"},{"product_id":"ortofon-cc-mk2-scratch-single-dj-cartridge","title":"Ortofon CC-MK2 SCRATCH SINGLE DJ Cartridge","description":"\u003cp\u003eThe Ortofon Concorde MKII Scratch Single is a moving-magnet DJ cartridge designed for turntablists who use scratching and back-cueing techniques. Its integrated Concorde form mounts directly to compatible tonearms with a standard bayonet\/SME connection. This single-cartridge package includes the cartridge body with its stylus pre-mounted.\u003c\/p\u003e\u003cp\u003eIt is built for DJs who need stable groove contact during active cueing, juggling, and scratch routines. The spherical diamond stylus is selected for demanding handling and repeated back-cueing use. A single cartridge is suitable for replacing one deck's cartridge or building a custom two-turntable setup.\u003c\/p\u003e\u003cp\u003eThe Scratch model produces a 10 mV output at 1 kHz and 5 cm\/sec, providing a strong signal level for a DJ phono system. Its specified frequency range is 20 Hz to 18 kHz at -3 dB, with 22 dB channel separation at 1 kHz. The sound character is designed around solid bass performance and extended high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eAn aluminum cantilever supports the spherical diamond stylus, which has an R 18 µm tip radius. The cartridge is rated for 120 µm tracking ability at 315 Hz when set to its recommended tracking force. Dynamic lateral compliance is specified at 14 µm\/mN for the Scratch model.\u003c\/p\u003e\u003cp\u003eThe Concorde MKII design streamlines installation by combining the cartridge and headshell-style connector into one unit. It is intended for direct mounting on a compatible tonearm, with no cartridge alignment required. When the stylus eventually wears, it can be replaced with the dedicated Stylus CC MKII Scratch replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eScratch-Focused Tuning:\u003c\/strong\u003e Designed for scratch and back-cueing applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mV Output:\u003c\/strong\u003e Provides a high-level phono signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Supports demanding DJ record handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 µm Tracking Ability:\u003c\/strong\u003e Helps maintain groove contact during performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Concorde Mount:\u003c\/strong\u003e Connects directly to bayonet\/SME tonearms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Uses the Stylus CC MKII Scratch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Concorde MKII Scratch combines the cartridge body and bayonet-style tonearm connector in a compact integrated design. It uses an aluminum cantilever and a spherical diamond stylus with an R 18 µm tip radius. Cartridge weight is 18.5 g, and the MKII mounting dimensions are 52 mm long by 13.5 mm high.\u003c\/p\u003e\u003cp\u003eInstall this cartridge only on a compatible tonearm with a standard bayonet\/SME mount. Ortofon specifies direct mounting without alignment; keep the stylus guard in place while mounting or removing the cartridge. Set tracking force within the 3 to 5 g range, with 4 g recommended, and use the specified 47 kOhm load resistance and 200 to 400 pF load capacitance where applicable.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669419155526,"sku":"CC-MK2 SCRATCH SINGLE","price":173.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61xevAgX5WL.jpg?v=1784500487"},{"product_id":"ortofon-cc-mk2-scratch-twin-concorde-dj-cartridge-twin-pack","title":"Ortofon CC-MK2 SCRATCH TWIN Concorde DJ Cartridge Twin Pack","description":"\u003cp\u003eThe Ortofon Concorde MKII Scratch Twin is a matched two-cartridge package made for turntablists and DJs who use scratch and back-cue techniques. Each Concorde cartridge arrives with its Scratch stylus preinstalled, so the pair is ready for compatible turntables with bayonet\/SME tonearms. A protective flight case is included for organized transport and storage.\u003c\/p\u003e\u003cp\u003eThis cartridge is voiced around a high 10 mV output, providing a strong phono signal for DJ setups. Its specified frequency range is 20 Hz to 18 kHz, with solid low-frequency reproduction and extended high-frequency response. The design is intended for energetic playback styles where dependable groove contact is important.\u003c\/p\u003e\u003cp\u003eA spherical diamond stylus is used for the demands of back-cueing and scratching. The stylus has an R 18 µm tip radius and is fitted to an aluminium cantilever. Ortofon specifies 120 µm tracking ability at 315 Hz when used at the recommended tracking force.\u003c\/p\u003e\u003cp\u003eThe Concorde MKII Scratch uses an integrated Concorde body with bayonet\/SME mounting. This direct-mount format installs onto a compatible tonearm without separate headshell leads or cartridge-alignment hardware. Each cartridge weighs 18.5 g and has a 52 mm cartridge length measured from the playback stylus tip to the rear edge of the rubber suspension.\u003c\/p\u003e\u003cp\u003eThis Twin package is a practical choice for DJs running two compatible turntables and wanting matching cartridge performance on both decks. Set each tonearm to the specified 3 to 5 g tracking-force range, with 4 g recommended by Ortofon. When replacement is needed, use the designated Stylus CC MKII Scratch replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin Cartridge Set:\u003c\/strong\u003e Includes two Concorde MKII Scratch cartridges for a matched two-turntable setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mV Output:\u003c\/strong\u003e Delivers a high output level for DJ phono stages and mixers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Designed for scratch and back-cue playback techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120 µm Tracking Ability:\u003c\/strong\u003e Helps maintain groove contact during demanding cueing movements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBayonet\/SME Mount:\u003c\/strong\u003e Directly fits compatible tonearms without separate headshell wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Flight Case:\u003c\/strong\u003e Keeps both cartridges together for storage and transport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach cartridge combines the integrated Concorde MKII body format with an aluminium cantilever and spherical diamond stylus. The cartridge body weighs 18.5 g, while the standardized Concorde MKII dimensions are 52 mm long and 13.5 mm high at the defined measurement points. Preinstalled stylus assemblies simplify handling before setup.\u003c\/p\u003e\u003cp\u003eMount each cartridge directly to a compatible bayonet\/SME tonearm, keeping the stylus guard in place during mounting or removal. Ortofon states that no cartridge alignment is required for this direct Concorde installation. Balance the tonearm and set tracking force within the 3 to 5 g range, using the 4 g recommended setting as the starting point.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669419614278,"sku":"CC-MK2 SCRATCH TWIN","price":346.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VRhj6_QkL.jpg?v=1784500536"},{"product_id":"ortofon-concord-digital-single-concorde-mkii-cartridge","title":"Ortofon CONCORD DIGITAL SINGLE Concorde MKII Cartridge","description":"\u003cp\u003eThe Ortofon CONCORD DIGITAL SINGLE is a Concorde MKII DJ cartridge designed for timecoded-vinyl playback. It is intended for DJs using digital vinyl systems who want a stable, high-output signal sent from the turntable to compatible software. The single-cartridge format provides one direct-mount Concorde cartridge with its stylus installed.\u003c\/p\u003e\u003cp\u003eIts 10 mV output is optimized to provide a strong signal for timecode decoding. Ortofon designs the DIGITAL model to reduce the reproduction of frequencies associated with vinyl wear and crackle, helping minimize decoding errors. It can also be used for conventional vinyl playback.\u003c\/p\u003e\u003cp\u003eThe cartridge uses a spherical diamond stylus on an aluminium cantilever. Its 20 Hz to 18 kHz frequency range and 22 dB channel separation at 1 kHz support clear signal retrieval for DJ applications. Recommended tracking force is 4 g, within a specified 3 to 5 g range.\u003c\/p\u003e\u003cp\u003eThe Concorde MKII platform uses a direct bayonet\/SME mounting interface rather than a conventional screw-mounted cartridge body. This design lets it attach directly to compatible tonearms without cartridge alignment. The cartridge measures 51.5 mm in effective length and weighs 18.5 g.\u003c\/p\u003e\u003cp\u003eThe CONCORD DIGITAL SINGLE is a practical replacement or upgrade for a DJ turntable used with timecode records. It is optimized specifically for timecoded vinyl while retaining compatibility with standard record playback. When the stylus eventually requires replacement, use the Ortofon Stylus CC MKII Digital.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimecode Optimization:\u003c\/strong\u003e Tailored response helps reduce errors when decoding timecoded vinyl.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 mV Output:\u003c\/strong\u003e Provides a strong signal to compatible DJ software interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Built for dependable groove contact in DJ use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium Cantilever:\u003c\/strong\u003e Supports precise stylus movement during record playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Concorde Mount:\u003c\/strong\u003e Bayonet\/SME fit installs directly on compatible tonearms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Uses the dedicated Stylus CC MKII Digital replacement stylus.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cartridge combines the integrated Concorde MKII form factor with an aluminium cantilever and spherical diamond stylus. It has an 18.5 g cartridge weight, a 14 mm height, and a 51.5 mm effective length. The stylus protection guard should remain fitted while mounting or removing the cartridge.\u003c\/p\u003e\u003cp\u003eInstall the cartridge directly onto a compatible Bayonet\/SME tonearm connection; no cartridge alignment is required. Set tracking force within the 3 to 5 g specified range, with 4 g recommended by Ortofon. This model is well suited to turntables used with DVS timecode records and can also play conventional vinyl.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669419647046,"sku":"CONCORD DIGITAL SINGLE","price":170.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ptvpwp_aL_312abf57-c002-4b26-80a1-9ed068923de4.jpg?v=1784500579"},{"product_id":"ortofon-elite-concorde-elite-replacement-stylus","title":"Ortofon ELITE Concorde Elite Replacement Stylus","description":"\u003cp\u003eThe Ortofon ELITE is the dedicated replacement stylus for the Concorde MKII Elite cartridge. It restores the intended stylus assembly for owners replacing a worn or damaged Elite stylus without replacing the complete cartridge. This is a turntable component, not a car-audio speaker or receiver.\u003c\/p\u003e\u003cp\u003eDesigned for record listeners and DJs who prioritize detailed vinyl playback, the ELITE uses a nude elliptical diamond profile. Its reduced moving mass and slim contact profile are intended to follow groove modulation accurately and retrieve high-frequency information. Ortofon specifies this stylus for listening rather than intensive back-cueing or scratching.\u003c\/p\u003e\u003cp\u003eThe stylus uses a rigid aluminum-magnesium cantilever developed for the Concorde Elite system. This cantilever transfers groove movement to the cartridge's generator while supporting the Elite's 100 µm tracking ability specification at the recommended tracking force. The intended system output is 8.5 mV at 1 kHz and 5 cm\/sec.\u003c\/p\u003e\u003cp\u003eA specially molded stylus body with genuine gold plating gives the ELITE its distinctive black-and-gold appearance. The assembly is purpose-built for the Concorde MKII Elite, whose design also incorporates a dedicated rubber suspension and coil system. Its nude elliptical diamond has an r\/R 8\/18 µm tip radius.\u003c\/p\u003e\u003cp\u003eFor an existing Concorde MKII Elite cartridge, the ELITE provides a direct replacement path that retains the cartridge's specified electrical and tracking characteristics. Set tracking force within the stated 2.0 to 4.0 g range, with 3.0 g recommended by Ortofon. Use it with a properly configured turntable and phono stage suited to the cartridge system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eElite-Specific Replacement:\u003c\/strong\u003e Made exclusively for the Concorde MKII Elite cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNude Elliptical Diamond:\u003c\/strong\u003e Supports accurate groove tracing and detailed playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Body:\u003c\/strong\u003e Special-molded stylus housing with genuine gold plating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum-Magnesium Cantilever:\u003c\/strong\u003e Rigid 750 µm cantilever supports stable tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0 g Recommended Force:\u003c\/strong\u003e Ortofon's specified setting for normal operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Output Elite System:\u003c\/strong\u003e Supports the Elite cartridge's 8.5 mV output specification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ELITE combines a special-molded, genuine gold-plated stylus body with a nude elliptical diamond and rigid aluminum-magnesium cantilever. The stylus assembly weighs 1 g and is finished to match the black-and-gold Concorde MKII Elite cartridge system. Its diamond profile and cantilever are designed specifically around the Elite cartridge's suspension and generator arrangement.\u003c\/p\u003e\u003cp\u003eThis stylus is intended only for the Concorde MKII Elite cartridge body; it is not a standalone cartridge. Install it as the replacement stylus assembly on a compatible Concorde MKII Elite, then set the turntable tonearm to Ortofon's recommended 3.0 g tracking force. The supported tracking-force range is 2.0 to 4.0 g, and the nude elliptical stylus should be reserved for playback rather than intensive scratching or back-cueing.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669419876422,"sku":"ELITE","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/41wRoByz_PL.jpg?v=1784500619"},{"product_id":"ortofon-om-pro-s-dj-cartridge","title":"Ortofon OM PRO S DJ Cartridge","description":"\u003cp\u003eThe Ortofon OM PRO S is a single DJ phono cartridge designed for turntables using a standard half-inch headshell mount. It provides a practical replacement or starting point for DJs who need a cartridge suited to cueing, mixing, and general vinyl playback. Its 5 mV output is intended for use with standard moving-magnet phono inputs.\u003c\/p\u003e\u003cp\u003eThis cartridge is aimed at new and working DJs who want dependable operation without moving into a specialized scratch or high-output model. The spherical diamond stylus is selected for durable, straightforward tracking in active turntable use. Its performance profile makes it suitable for general-purpose DJ applications and everyday record listening.\u003c\/p\u003e\u003cp\u003eThe OM PRO S uses an aluminum cantilever and a spherical stylus with an 18 μm tip radius. Ortofon specifies a 3 to 5 g tracking-force range, with 4 g recommended for normal use. At the recommended setting, it is rated for 70 μm tracking ability at 315 Hz.\u003c\/p\u003e\u003cp\u003eWith a 20 Hz to 18 kHz frequency range and 20 dB channel separation at 1 kHz, the OM PRO S is engineered for clear stereo playback in a DJ system. Its 5 mV output supports conventional phono-stage gain requirements. The 5 g cartridge weight can help when matching it to a compatible headshell and tonearm.\u003c\/p\u003e\u003cp\u003eThe OM PRO S is the headshell-mount version of the Pro S cartridge design, making it appropriate for turntables that accept standard mounted cartridges. It can be paired with a compatible headshell, tonearm, phono preamp, mixer, or receiver with a moving-magnet phono input. When the stylus eventually requires service, Ortofon specifies the Stylus PRO S as the replacement stylus.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Supports durable tracking for general DJ use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cantilever:\u003c\/strong\u003e Provides a solid stylus support structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 mV Output:\u003c\/strong\u003e Works with standard moving-magnet phono inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Inch Mount:\u003c\/strong\u003e Fits compatible headshell-based turntable setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 g Recommended Force:\u003c\/strong\u003e Establishes the specified normal tracking setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Uses the separately available Stylus PRO S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe OM PRO S combines a 5 g cartridge body with an aluminum cantilever and spherical diamond stylus. Its construction is intended for the repeated handling and active use associated with DJ turntables. The spherical stylus profile and specified tracking-force range support its general-purpose operating role.\u003c\/p\u003e\u003cp\u003eInstall the cartridge on a compatible standard half-inch headshell, connect the headshell lead wires correctly, then align the cartridge according to the turntable or tonearm instructions. Set tracking force within the 3 to 5 g specification, using 4 g as the recommended setting, and adjust the tonearm setup as required by the turntable manufacturer. Use it with a moving-magnet-compatible phono input and replace the stylus with an Ortofon Stylus PRO S when needed.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669420171334,"sku":"OM PRO S SINGLE","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61gWMGTmPzL.jpg?v=1784500656"},{"product_id":"ortofon-om-5s-moving-magnet-phono-cartridge","title":"Ortofon OM-5S Moving Magnet Phono Cartridge","description":"\u003cp\u003eThe Ortofon OM-5S is a moving magnet phono cartridge for stereo vinyl playback on turntables with a standard cartridge mount or headshell. It is designed as a practical replacement or upgrade for listeners who need a low-mass cartridge with a user-replaceable stylus. Its spherical stylus profile supports dependable general-purpose record playback.\u003c\/p\u003e\u003cp\u003eThis cartridge is intended for home hi-fi turntable systems rather than DJ use. Its 4.5 mV output is suited to moving-magnet phono stages with a 47 kOhm load. The OM-5S is a sensible choice for systems that need a compact cartridge without adding substantial mass to the tonearm.\u003c\/p\u003e\u003cp\u003eThe OM-5S uses a spherical stylus with an R 18 µm tip radius and a specified frequency response of 20 Hz to 20 kHz. Ortofon specifies 20 dB channel separation at 1 kHz and 60 µm tracking ability at 315 Hz. Its recommended tracking force is 1.8 g, helping provide a defined setup target during installation.\u003c\/p\u003e\u003cp\u003eA removable weight plate is integrated into the mounting bracket to help match the cartridge to different tonearms. With the extra weight installed, cartridge weight is 5 g; removing it reduces the cartridge weight to 2.5 g. This flexibility is useful for both standard and lower-mass tonearm applications.\u003c\/p\u003e\u003cp\u003eThe OM-5S is part of Ortofon's OM platform, which supports interchangeable replacement styli. It comes fitted with the Stylus 5S and can be used as the starting point for future OM-series stylus changes. This lets a listener replace a worn stylus or tailor the cartridge setup without necessarily replacing the cartridge body.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoving Magnet Design:\u003c\/strong\u003e Works with compatible MM phono inputs and preamps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Stylus:\u003c\/strong\u003e Provides reliable general-purpose stereo record playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.5 mV Output:\u003c\/strong\u003e Delivers an output level suited to MM phono stages.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Weight Plate:\u003c\/strong\u003e Helps adapt cartridge mass for different tonearms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Mass Body:\u003c\/strong\u003e Weighs 2.5 g without the extra weight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Allows stylus replacement and OM-series upgrade options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe OM-5S has a black cartridge body and black stylus assembly, with a lightweight body designed around a removable brass extra-weight system. Its triangular upper mounting area is designed to reduce unnecessary mass, while slotted mounting points support a range of mounting-screw diameters. The cartridge is specified at 5 g with the extra weight fitted and 2.5 g without it.\u003c\/p\u003e\u003cp\u003eInstall the OM-5S on a compatible top-mount or bottom-mount headshell or cartridge mount, then align the cartridge and set tracking force to Ortofon's recommended 1.8 g. Use it with a moving-magnet phono stage set for a 47 kOhm load and 200-500 pF load capacitance. The OM-5S is intended for hi-fi record playback; avoid scratch and back-cueing use, which can damage the stylus.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669420728390,"sku":"OM-5S","price":66.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51iiJ2W-sKL.jpg?v=1784500688"},{"product_id":"ortofon-stylus-elite-concorde-elite-replacement-stylus","title":"Ortofon STYLUS ELITE Concorde Elite Replacement Stylus","description":"\u003cp\u003eThe Ortofon STYLUS ELITE is a replacement stylus made specifically for the Concorde Elite cartridge. It restores the cartridge’s intended tracking and playback characteristics when the original stylus is worn or damaged. This is a turntable component for vinyl playback, not a complete cartridge or a car-audio speaker product.\u003c\/p\u003e\u003cp\u003eDesigned for listeners and DJs using the Concorde Elite system, this stylus combines a nude elliptical diamond tip with a rigid aluminum-magnesium cantilever. Its elliptical profile is engineered to follow record-groove detail with precision. The result is detailed playback with strong output from a properly matched Concorde Elite cartridge.\u003c\/p\u003e\u003cp\u003eThe stylus assembly uses a specially molded body with genuine gold plating. Beyond its distinctive finish, the assembly is designed to maintain the Elite cartridge’s mechanical setup and specified tracking geometry. The stylus itself weighs 1 g.\u003c\/p\u003e\u003cp\u003eA nude elliptical diamond reduces moving mass compared with a bonded stylus design. This supports accurate groove tracing and helps the stylus retrieve high-frequency information specified for the Elite system. The Elite stylus is rated for 100 µm tracking ability at 315 Hz when set to its recommended tracking force.\u003c\/p\u003e\u003cp\u003eUse the STYLUS ELITE as the service replacement for an existing Ortofon Concorde Elite cartridge. Set the tonearm to the specified 3.0 g recommended tracking force, then confirm proper balance and alignment on the turntable. Its 8.5 mV output specification and electrical loading figures apply when the stylus is used with the compatible Concorde Elite cartridge.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcorde Elite Compatibility:\u003c\/strong\u003e Made as the dedicated replacement stylus for Concorde Elite cartridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNude Elliptical Diamond:\u003c\/strong\u003e Tracks groove detail with a low-moving-mass diamond assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Stylus Body:\u003c\/strong\u003e Specially molded body finished with genuine gold plating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum-Magnesium Cantilever:\u003c\/strong\u003e Rigid lightweight cantilever transfers groove motion to the generator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0 g Recommended Tracking Force:\u003c\/strong\u003e Provides the specified operating point for the Elite stylus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Tracking Ability:\u003c\/strong\u003e Rated to track 100 µm at 315 Hz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STYLUS ELITE combines a real gold-plated molded stylus housing, nude elliptical diamond, and aluminum-magnesium cantilever. Its diamond tip has an r\/R radius of 8\/18 µm, while the specified tracking angle is 20°. The stylus is designed as a precision replacement assembly rather than a universal needle.\u003c\/p\u003e\u003cp\u003eInstall it only on a compatible Ortofon Concorde Elite cartridge body. Carefully remove the existing stylus and fit the replacement without touching the diamond tip or cantilever, then set tracking force to 3.0 g; the approved range is 2.0 to 4.0 g. Confirm the turntable can accommodate the required force and follow the turntable and cartridge setup instructions before playing records.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669420793926,"sku":"STYLUS ELITE","price":355.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/41wRoByz_PL_7f0b4aa6-b19e-4434-a42c-41597fa741af.jpg?v=1784500716"},{"product_id":"ortofon-stylus-mk2-club-replacement-dj-stylus","title":"Ortofon STYLUS MK2 CLUB Replacement DJ Stylus","description":"\u003cp\u003eThe Ortofon STYLUS MK2 CLUB is a replacement stylus designed specifically for the Concorde MKII Club DJ cartridge. It restores the intended tracking and playback characteristics when an existing Club stylus is worn or damaged. This replacement is intended for DJs, record collectors, and users transferring vinyl to digital formats.\u003c\/p\u003e\u003cp\u003eIts Special Elliptical stylus profile is designed to follow record grooves with greater contact area than a spherical stylus profile. In the Concorde MKII Club system, this supports detailed retrieval from vinyl and a balanced, high-output playback presentation. The specified 8 mV output applies to the Club cartridge system when this stylus is used with its matching cartridge body.\u003c\/p\u003e\u003cp\u003eThe stylus is specified for a 2 to 4 g tracking-force range, with 3 g recommended. Correct tonearm setup within that range is important for stable groove contact and consistent playback. Its specified tracking ability is 100 µm at 315 Hz.\u003c\/p\u003e\u003cp\u003eOrtofon gives the MKII Club stylus a front cut-out that makes the needle tip easier to see when cueing a record. The stylus assembly also provides tactile feedback as it is seated on the cartridge body, helping indicate that it has been fitted securely. These practical details support controlled cueing in DJ and studio environments.\u003c\/p\u003e\u003cp\u003eThis is a stylus-only service part rather than a complete cartridge or headshell assembly. It is made for the Concorde MKII Club platform, allowing an existing compatible Club cartridge to remain in service. Pair it with a properly adjusted turntable tonearm and phono input for vinyl playback or recording workflows.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcorde MKII Club Replacement:\u003c\/strong\u003e Designed specifically for the Concorde MKII Club cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Elliptical Stylus:\u003c\/strong\u003e Helps retrieve detailed information from record grooves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 g Recommended Tracking:\u003c\/strong\u003e Provides the manufacturer-recommended operating point for setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2–4 g Tracking Range:\u003c\/strong\u003e Allows adjustment within the specified tracking-force window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Cueing Cut-Out:\u003c\/strong\u003e Improves visibility for more precise needle placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTactile Seating Feedback:\u003c\/strong\u003e Helps confirm a snug fit on the cartridge body.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STYLUS MK2 CLUB is a compact replacement stylus assembly with a specified stylus weight of 1 g. Its Special Elliptical diamond tip and front cut-out are built around accurate groove contact and clear visibility at the record surface. The seating design provides tactile feedback when the stylus is installed on its matching cartridge body.\u003c\/p\u003e\u003cp\u003eUse this stylus only with a Concorde MKII Club cartridge body. Seat the replacement fully, then set the turntable tonearm’s tracking force within the specified 2 to 4 g range; Ortofon recommends 3 g. Keep the stylus guard in place while mounting or dismounting the cartridge, and clean the tip gently from the rear toward the stylus tip with a stylus brush.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669420924998,"sku":"STYLUS MK2 CLUB","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/612Nj3-1fNL.jpg?v=1784500753"},{"product_id":"ortofon-stylus-mk2-digital-replacement-stylus","title":"Ortofon STYLUS MK2 DIGITAL Replacement Stylus","description":"\u003cp\u003eThe Ortofon STYLUS MK2 DIGITAL is a replacement stylus assembly made for the Concorde MKII Digital DJ cartridge. It is intended for DJs using timecode vinyl and digital vinyl systems that depend on reliable record-to-software signal decoding. Replacing a worn stylus helps restore the intended tracking behavior of the matching cartridge.\u003c\/p\u003e\u003cp\u003eThis stylus is designed for timecoded-vinyl use, where consistent tracking and a clear control signal are important during playback. Its spherical R 18 μm stylus profile is specified for a 3 to 5 g tracking-force range, with 4 g recommended. The design supports both timecode records and conventional vinyl when installed on the matching Concorde MKII Digital cartridge body.\u003c\/p\u003e\u003cp\u003eWith the matching Concorde MKII Digital cartridge, the system is specified for 10 mV output at 1 kHz, 5 cm\/sec and 22 dB channel separation at 1 kHz. This output level is designed to provide a strong signal to DJ software for timecode interpretation. The matched system also has a specified 20 Hz to 18 kHz frequency range.\u003c\/p\u003e\u003cp\u003eA cut-out section at the front of the assembly gives the DJ a clearer view of the stylus tip area for more precise needle drops. The stylus also provides tactile feedback as it is seated on the cartridge body, helping indicate that it is fitted securely. These practical details support quick stylus changes and cueing in a DJ workflow.\u003c\/p\u003e\u003cp\u003eThe STYLUS MK2 DIGITAL is an upgrade-path and maintenance item for an existing Concorde MKII Digital setup rather than a complete cartridge. It replaces the stylus assembly while retaining the installed cartridge body and its integrated Concorde mounting format. Set the tonearm tracking force within Ortofon's specified range after replacement for proper operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcorde MKII Digital Replacement:\u003c\/strong\u003e Made specifically for the Concorde MKII Digital cartridge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTimecode Vinyl Focus:\u003c\/strong\u003e Designed to support accurate timecode-signal decoding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical R 18 μm Stylus:\u003c\/strong\u003e Uses a spherical diamond stylus profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 g Recommended Tracking:\u003c\/strong\u003e Targets the specified recommended tracking-force setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Cut-Out:\u003c\/strong\u003e Improves visibility for more accurate needle drops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTactile Seating Feedback:\u003c\/strong\u003e Helps confirm a snug stylus-to-cartridge fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STYLUS MK2 DIGITAL is a purpose-built replacement assembly with a spherical R 18 μm stylus and a front cut-out for better cueing visibility. Its seating design provides tactile feedback when installed on the compatible cartridge body. The stylus assembly itself is specified at 1 g.\u003c\/p\u003e\u003cp\u003eUse this stylus with an Ortofon Concorde MKII Digital cartridge body. Seat the replacement assembly fully until the fit feels secure, then set the tonearm tracking force between 3 and 5 g; Ortofon recommends 4 g. It is intended as a stylus replacement, so a compatible cartridge and turntable setup are required for use.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669420957766,"sku":"STYLUS MK2 DIGITAL","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51bEpJmlT2L_97fec013-ab97-489a-9843-110e8c0b3961.jpg?v=1784500790"},{"product_id":"ortofon-stylus-ncs-nightclub-s-replacement-stylus","title":"Ortofon STYLUS NCS Nightclub S Replacement Stylus","description":"\u003cp\u003eThe Ortofon STYLUS NCS Nightclub S is a replacement stylus assembly for legacy Ortofon Nightclub S DJ cartridge systems. It restores the tracking and playback characteristics of a worn Nightclub S stylus without requiring replacement of the compatible cartridge body. It is intended for DJs who use vinyl in performance-focused setups.\u003c\/p\u003e\u003cp\u003eThis stylus uses a spherical diamond tip designed for dependable groove contact during scratching, back-cueing, mixing, and beat juggling. Its recommended 3.0 g tracking force provides a practical setup target for compatible turntables and tonearms. The specified tracking-force range extends from 2.0 to 5.0 g.\u003c\/p\u003e\u003cp\u003eOrtofon specifies a 6 mV output level at 1 kHz and 5 cm\/sec when used in its intended cartridge system. The published frequency response is 20 Hz to 20 kHz, rated +3 \/ -2 dB. This combination suits DJ playback where stable tracking and useful output level are important.\u003c\/p\u003e\u003cp\u003eThe Nightclub S stylus has an R 18 µm spherical tip radius and a 20-degree tracking angle. Ortofon rates tracking ability at 80 µm at 315 Hz with the recommended tracking force. These specifications support cueing and record handling techniques that place added demands on stylus stability.\u003c\/p\u003e\u003cp\u003eSTYLUS NCS is a replacement part rather than a complete cartridge or turntable system. It is made for compatible Ortofon Concorde Nightclub Series and OM Nightclub Series cartridge applications. Replace the existing stylus carefully, then rebalance the tonearm and set tracking force before playback.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNightclub S Replacement:\u003c\/strong\u003e Restores a compatible Ortofon Nightclub S cartridge setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Tip:\u003c\/strong\u003e Supports stable groove contact during DJ handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eR 18 µm Tip Radius:\u003c\/strong\u003e Uses Ortofon's specified spherical stylus profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0 g Recommended Tracking:\u003c\/strong\u003e Provides the manufacturer's primary setup target.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 Hz–20 kHz Response:\u003c\/strong\u003e Covers the specified DJ playback frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80 µm Tracking Ability:\u003c\/strong\u003e Helps maintain contact during cueing and scratching.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STYLUS NCS is a yellow spherical replacement stylus assembly for the Ortofon Nightclub S family. Its diamond stylus has an R 18 µm spherical profile and a specified 20-degree tracking angle. The design is intended for the high-contact demands of DJ mixing, back-cueing, and scratching.\u003c\/p\u003e\u003cp\u003eInstall this stylus only on a compatible Ortofon Nightclub Series Concorde or OM cartridge body. With the turntable powered off, remove the worn stylus and fit the replacement without touching the diamond tip; then set the tonearm to the recommended 3.0 g tracking force. Confirm proper alignment, tonearm balance, and clean record condition before performance use.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669420990534,"sku":"STYLUS NCS","price":80.99,"currency_code":"USD","in_stock":true}]},{"product_id":"ortofon-stylus-qbert-10th-gold-anniversary-stylus","title":"Ortofon STYLUS QBERT-10TH Gold Anniversary Stylus","description":"\u003cp\u003eThe Ortofon STYLUS QBERT-10TH is a replacement DJ stylus made for the Q.Bert Gold Anniversary cartridge system. It restores the groove-contacting assembly of a worn or damaged stylus without requiring replacement of the complete cartridge body. It is intended for DJs who need a spherical-profile stylus configured for cueing, back-cueing, and scratching.\u003c\/p\u003e\u003cp\u003eThis Gold Anniversary version retains the specified electrical and tracking characteristics associated with DJ Q.Bert’s Concorde design. Its 11 mV output is suited to DJ phono inputs and provides a strong signal for scratch-oriented playback. The sound character is designed for confident tracking and substantial output when playing bass-heavy music.\u003c\/p\u003e\u003cp\u003eA spherical diamond tip with an R 18 µm radius supports the stylus’s scratch-focused role. Ortofon specifies a 2.0 to 4.0 g tracking-force range, with 3.0 g recommended for normal operation. Dynamic lateral compliance is rated at 12 µm\/mN, supporting the flexibility needed during demanding cueing and scratching moves.\u003c\/p\u003e\u003cp\u003eThe stylus is part of Ortofon’s original OM and Concorde MkI-era DJ ecosystem, not the later Concorde MkII platform. Ortofon states that MkI and MkII styli are not interchangeable and will not physically fit each other. This makes confirming the cartridge generation important before purchase.\u003c\/p\u003e\u003cp\u003eGold finishing and anniversary artwork distinguish this edition visually while preserving its Q.Bert-oriented function. The top carries an exclusive E.T. character graphic, with THUD RUMBLE and OSGEMEOS tags on the sides. It is a practical replacement for maintaining a compatible Gold Anniversary setup while retaining its original look.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold Anniversary Replacement:\u003c\/strong\u003e Designed as the replacement stylus for the Q.Bert Gold Anniversary system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Tip:\u003c\/strong\u003e R 18 µm spherical profile supports scratch and cueing use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 mV Output:\u003c\/strong\u003e Provides a strong phono-level signal for DJ mixer inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.0 g Recommended Force:\u003c\/strong\u003e Helps balance groove hold and intended tracking performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScratch-Focused Compliance:\u003c\/strong\u003e 12 µm\/mN lateral compliance supports flexible back-cueing behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnniversary Artwork:\u003c\/strong\u003e Gold finish with E.T., THUD RUMBLE, and OSGEMEOS graphics.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STYLUS QBERT-10TH is a gold-finished replacement stylus assembly with a spherical diamond tip and anniversary-specific artwork. Its design preserves the Q.Bert Gold Anniversary visual identity while using the same stated audio specifications as DJ Q.Bert’s Concorde cartridges. The specified tracking angle is 20 degrees.\u003c\/p\u003e\u003cp\u003eInstall it only on a compatible original-generation Ortofon Q.Bert Gold Anniversary cartridge system. Secure the tonearm before changing the stylus, remove the existing stylus gently, and press the replacement into position without forcing it. Set tracking force within the 2.0 to 4.0 g range, starting at Ortofon’s recommended 3.0 g setting; for DJ scratching, Ortofon advises anti-skating at 0.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669421514822,"sku":"STYLUS QBERT-10TH","price":80.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61EPGaY8t4L.jpg?v=1784500864"},{"product_id":"ortofon-om-pro-s-single-dj-cartridge","title":"Ortofon OM-PRO S SINGLE DJ Cartridge","description":"\u003cp\u003eThe Ortofon OM-PRO S SINGLE is a DJ cartridge for turntables using a half-inch cartridge mount. It combines a preinstalled stylus and cartridge body for users who need a replacement or a single-cartridge setup. Its design is suited to general DJ use, including cueing and active handling at the turntable.\u003c\/p\u003e\u003cp\u003eThis cartridge is intended for DJs building a practical vinyl playback setup without moving to a specialized application-specific stylus profile. The spherical diamond stylus provides a straightforward contact shape for dependable record tracking. With a recommended 4 g tracking force, it is designed for use with tonearms that can be properly balanced and adjusted for DJ playback.\u003c\/p\u003e\u003cp\u003eThe OM Pro S produces a 5 mV output at 1 kHz and 5 cm\/sec, making it appropriate for standard phono-stage connections designed for magnetic cartridges. Its specified frequency response is 20 Hz to 18 kHz within ±2 dB. Channel separation is rated at 20 dB at 1 kHz, supporting stereo vinyl playback through a compatible phono system.\u003c\/p\u003e\u003cp\u003eA spherical stylus and solid cantilever are central to the OM Pro S design. Ortofon specifies 70 μm tracking ability at 315 Hz using the recommended tracking force. The cartridge also uses a relatively high recommended tracking-force setting for stable operation in hands-on DJ applications.\u003c\/p\u003e\u003cp\u003eThe OM Pro S fits a turntable system through a compatible headshell or tonearm with a half-inch mount, followed by a phono preamp or phono input in the audio chain. Its 5 g cartridge weight should be considered along with headshell weight and tonearm counterweight range. When the stylus reaches the end of its service life, the specified replacement is the Ortofon Stylus PRO S.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHalf-Inch Mount:\u003c\/strong\u003e Fits compatible headshells and tonearms using the standard two-screw cartridge format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpherical Diamond Stylus:\u003c\/strong\u003e Provides a durable stylus profile for general DJ playback and handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 mV Output:\u003c\/strong\u003e Delivers a phono-level signal for compatible phono inputs or preamps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 g Recommended Tracking Force:\u003c\/strong\u003e Supports the cartridge's specified tracking performance in DJ use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 μm Tracking Ability:\u003c\/strong\u003e Rated at 315 Hz with the recommended tracking force applied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Stylus:\u003c\/strong\u003e Uses the separately available Ortofon Stylus PRO S replacement stylus.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe OM Pro S uses a spherical diamond stylus and a solid cantilever intended for demanding turntable activity. The cartridge body weighs 5 g, excluding the headshell, and uses a half-inch mounting arrangement. Its stylus assembly is replaceable, allowing the cartridge body to remain in service when a Stylus PRO S replacement is needed.\u003c\/p\u003e\u003cp\u003eMount the cartridge to a compatible half-inch headshell or tonearm using suitable mounting hardware, then connect the headshell leads according to the turntable's wiring convention. Balance the tonearm and set tracking force within the specified 3 to 5 g range, with 4 g recommended by Ortofon. Use it with a phono input or phono preamp providing a 47 kΩ load resistance and suitable capacitance within the stated 200 to 600 pF range.\u003c\/p\u003e","brand":"Ortofon","offers":[{"title":"Default Title","offer_id":45669479776326,"sku":"OM-PRO S SINGLE","price":70.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61gWMGTmPzL_d412326b-772d-4146-90a2-bc1d0d1aff89.jpg?v=1784507643"}],"url":"https:\/\/audiowatt.store\/collections\/ortofon.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}