{"title":"New Arrivals","description":null,"products":[{"product_id":"hifonics-brl1200-1-brutus-1200w-mono-car-amplifier","title":"Hifonics BRL1200.1 Brutus 1200W Mono Car Amplifier","description":"\u003cp\u003eThe Hifonics Brutus BRL1200.1 is a mono car audio amplifier designed to provide dedicated power for a subwoofer system. It delivers up to 1 x 1200 watts RMS at 1 ohm, with additional rated output at 2- and 4-ohm loads. Its compact chassis makes it a practical option for adding controlled bass output without using a multi-channel amplifier.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building or upgrading a bass-focused vehicle audio system. Variable high-pass and low-pass crossover controls allow the output range to be adjusted for the subwoofer and installation. A built-in bass control and included wired bass remote make level adjustment convenient from the driver's seat.\u003c\/p\u003e\u003cp\u003eThe BRL1200.1 uses Hifonics Super D Class technology and a half-bridge power-supply design. This efficient topology is paired with an iron-core transformer and Ultra-Fi MOSFET output devices. The design is built to support high-output mono operation while helping limit interference with vehicle electronics.\u003c\/p\u003e\u003cp\u003eA selectable illuminated Hifonics logo provides a distinctive visual feature without requiring a separate display. It can be set for constant blue illumination, VU meter operation, or switched off. In VU meter mode, the logo responds to audio level and can assist during gain setup.\u003c\/p\u003e\u003cp\u003eFor system integration, the BRL1200.1 accepts RCA-level input and provides a 0.2-9V input sensitivity range. Its variable filters, bass boost, and remote level control support tuning for different subwoofer systems and listening preferences. Protection circuitry monitors over\/under-voltage, short-circuit, overcurrent, and thermal conditions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono RMS Output:\u003c\/strong\u003e Delivers 1200 watts RMS at 1 ohm, with rated output at 2 and 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper D Class Design:\u003c\/strong\u003e Efficient Class-D-based topology supports compact, dedicated subwoofer amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Adjustable high-pass and low-pass filters help tailor the amplifier to the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable VU Meter Logo:\u003c\/strong\u003e Blue logo lighting can operate constantly, respond to music, or switch off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Remote:\u003c\/strong\u003e Wired remote adjusts bass level relative to the amplifier's panel setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Protection Circuits:\u003c\/strong\u003e Built-in safeguards address voltage, short-circuit, overcurrent, and thermal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL1200.1 has a black, compact chassis with a mass-loaded extruded aluminum heat sink for thermal management. Its multi-layer PCB construction uses surface-mount components, while nickel-plated RCA inputs help resist corrosion. Angled, molded terminals are designed to provide organized access for power, ground, and speaker wiring.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure surface with adequate airflow and use the specified 2 AWG power and ground terminals, 12 AWG speaker terminals, and external 150A fuse protection. Connect a compatible source unit through its RCA inputs, then set input level, crossover points, and bass boost carefully for the connected subwoofer system. The included wired bass remote can be used for on-the-fly bass-level adjustment after the main amplifier settings are established.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631905660998,"sku":"BRL1200-1","price":314.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Bw62Pg-vL.jpg?v=1784386330"},{"product_id":"hifonics-brl1200-4-4-channel-car-amplifier","title":"Hifonics BRL1200.4 4-Channel Car Amplifier","description":"\u003cp\u003eThe Hifonics BRL1200.4 is a four-channel car audio amplifier designed to add dedicated power to a vehicle speaker system. It delivers up to 150 watts RMS per channel at 4 ohms or 300 watts RMS per channel at 2 ohms. It is suited to systems that need an external amplifier for front and rear speakers, component sets, or a mixed full-range setup.\u003c\/p\u003e\u003cp\u003eIts four-channel layout supports conventional stereo operation as well as bridged operation for compatible higher-power channels. In bridged configuration, it is rated for 600 watts RMS per channel into 4 ohms across two channels. This flexibility allows the amplifier to be used in a speaker-focused system now and adapted as the system changes.\u003c\/p\u003e\u003cp\u003eThe BRL1200.4 uses Hifonics Super D Class amplification with a Class-D chipset, half-bridge design, and Ultra-Fi MOSFET output devices. Its design is intended to provide efficient power delivery while managing heat in compact vehicle installations. A mass-loaded extruded aluminum heat sink supports thermal management during normal operation.\u003c\/p\u003e\u003cp\u003eFor system tuning, the amplifier includes variable high-pass and low-pass crossovers with a 40 Hz to 2 kHz adjustment range. The 12 dB-per-octave electronic crossover helps direct appropriate frequencies to full-range speakers or other compatible channels. Built-in bass control and a 0.2 to 9V input sensitivity range provide additional setup flexibility.\u003c\/p\u003e\u003cp\u003eA selectable illuminated logo can operate as a constant blue light, a VU meter that follows audio level, or remain off. The VU mode can assist with visual gain adjustment during setup. Protection circuitry monitors over-voltage, under-voltage, short-circuit, overcurrent, and thermal conditions to help safeguard the amplifier and connected system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Powers four speakers or supports two bridged channel pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200-Watt RMS Total:\u003c\/strong\u003e Provides 4 x 300 watts RMS at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 40 Hz to 2 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVU Meter Logo:\u003c\/strong\u003e Select constant blue illumination, audio-reactive mode, or off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Supports connection to compatible factory or aftermarket source units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuits:\u003c\/strong\u003e Helps monitor voltage, current, short-circuit, and thermal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL1200.4 has a black chassis with a mass-loaded extruded aluminum heat sink, multi-layer PCB construction, nickel-plated RCA jacks, and secure molded connection terminals. Its angled terminal layout is intended to make cable access and wire routing more manageable. The amplifier measures 9.75 x 5.75 x 2.25 inches.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a secure surface with adequate airflow and use properly sized power, ground, signal, and speaker wiring. Hifonics specifies an external 80A fuse and lists 2 AWG power cable in its cable-size guide for this model. Match connected speakers to the amplifier's 2-ohm minimum unbridged load or 4-ohm minimum bridged load, then set gain and crossover controls carefully during installation.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631906021446,"sku":"BRL1200-4","price":385.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61S5XDfaPtL.jpg?v=1784386381"},{"product_id":"hifonics-brl1600-1-1600w-mono-car-amplifier","title":"Hifonics BRL1600.1 1600W Mono Car Amplifier","description":"\u003cp\u003eThe Hifonics BRUTUS BRL1600.1 is a mono car audio amplifier designed to power a dedicated subwoofer channel. It is suited to systems that need substantial low-frequency output without adding a multi-channel amplifier where one is not needed. Its mono-only layout keeps the focus on bass amplification and subwoofer system integration.\u003c\/p\u003e\u003cp\u003eHifonics describes the BRL1600.1 as a 1600-watt RMS BRUTUS BRL amplifier and lists power capability at 4-, 2-, and 1-ohm loads. A variable electronic crossover, bass boost, and included bass remote give the installer practical tools for tailoring the subwoofer output. The remote lets the listener adjust bass level relative to the amplifier's end-panel setting.\u003c\/p\u003e\u003cp\u003eThe amplifier uses Hifonics' Super D Class design with a half-bridge topology and an iron-core transformer power supply. This design approach is intended to support efficient power delivery while helping minimize electromagnetic interference with vehicle electronics. Ultra-Fi MOSFET output devices and a mass-loaded extruded aluminum heat sink support output and thermal management.\u003c\/p\u003e\u003cp\u003eFor signal control, the BRL1600.1 provides RCA inputs, a variable input sensitivity range, and both high-pass and low-pass crossover adjustment. Its crossover controls allow the amplifier to be configured for a range of subwoofer and system tuning approaches. A built-in bass control provides additional low-frequency adjustment.\u003c\/p\u003e\u003cp\u003eThe amplifier is designed for universal mobile-audio installation and uses secure molded, angled terminals for power, ground, and speaker wiring. Built-in protection circuits address over\/under-voltage, short-circuit, overcurrent, and thermal conditions. Its illuminated logo can be set to constant blue, VU meter operation, or off for a cleaner appearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Subwoofer Amplification:\u003c\/strong\u003e Dedicated single-channel design for powering a subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper D Class Design:\u003c\/strong\u003e Efficient amplifier topology supports high-output bass applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossover:\u003c\/strong\u003e Adjustable high-pass and low-pass filters help integrate a subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVU Meter Logo:\u003c\/strong\u003e Illuminated logo can display audio level or remain blue.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Remote:\u003c\/strong\u003e Allows convenient adjustment of bass level from the front seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Protection Circuits:\u003c\/strong\u003e Helps protect the amplifier and vehicle audio system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL1600.1 has a black BRUTUS BRL chassis with a mass-loaded extruded aluminum heat sink, multi-layer PCB construction, and nickel-plated RCA jacks. Angled molded terminals are designed to provide easier connection access and cleaner wire routing. The amplifier also includes selectable logo illumination with blue, VU meter, and off settings.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a secure surface with adequate ventilation and do not mount it upside down. Use appropriately sized power, ground, and speaker wiring, including the specified external fuse protection, and connect it to a subwoofer load no lower than 1 ohm. Set gain, crossover points, bass boost, and the bass remote level carefully to suit the source unit and subwoofer system.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631906578502,"sku":"BRL1600-1","price":375.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61oZ3f8jvjL.jpg?v=1784386428"},{"product_id":"hifonics-brl1600-4-4-channel-car-audio-amplifier","title":"Hifonics BRL1600.4 4-Channel Car Audio Amplifier","description":"\u003cp\u003eThe Hifonics BRL1600.4 is a four-channel car audio amplifier designed to add substantial power and system flexibility to an aftermarket vehicle sound system. It can drive four speakers in stereo or operate as two bridged channels for compatible higher-power applications. This makes it suitable for users upgrading factory-amplified or head-unit-powered speakers with a dedicated external amplifier.\u003c\/p\u003e\u003cp\u003eWith rated output of 300 watts RMS per channel at 4 ohms and 450 watts RMS per channel at 2 ohms, the BRL1600.4 is intended for demanding full-range speaker systems. Its 2-ohm stereo stability gives installers options when matching speakers and wiring layouts. Two channels can also be bridged for 880 watts RMS per channel at 4 ohms.\u003c\/p\u003e\u003cp\u003eThe amplifier uses Hifonics Super D Class architecture and a half-bridge design intended to support efficient power delivery in a compact chassis. An iron-core transformer and ultra-low-EMI design help support integration in modern vehicle electrical environments. A mass-loaded extruded aluminum heat sink assists with thermal management during extended use.\u003c\/p\u003e\u003cp\u003eVariable high-pass and low-pass crossovers each operate from 40 Hz to 2 kHz, allowing the amplifier to be tailored for full-range speakers, midbass drivers, or selected system configurations. Built-in bass control provides an additional adjustment option. The 0.2 to 9V input range supports connection with a range of compatible source-unit preamp outputs.\u003c\/p\u003e\u003cp\u003eThe BRL1600.4 includes an illuminated Hifonics logo with selectable constant-blue, VU-meter, or off modes. In VU-meter mode, the logo responds to audio level and can assist during gain adjustment. Triple protection circuitry monitors over\/under-voltage, short-circuit, overcurrent, and thermal conditions to help protect the amplifier and connected system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Design:\u003c\/strong\u003e Powers four speakers in stereo or supports two bridged channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Stability:\u003c\/strong\u003e Delivers 450 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 40 Hz to 2 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable VU Logo:\u003c\/strong\u003e Choose constant blue illumination, audio-reactive VU mode, or off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper D Class Architecture:\u003c\/strong\u003e Supports efficient amplification in a compact mobile-audio design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Includes voltage, short-circuit, overcurrent, and thermal safeguards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL1600.4 uses a black chassis with a mass-loaded extruded aluminum heat sink, multi-layer circuit boards, surface-mount components, nickel-plated RCA inputs, and molded connection terminals. Its terminals are angled to improve access and create a cleaner wire-routing profile. The amplifier measures 10.5 inches long, 5.75 inches wide, and 2.25 inches high.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry, ventilated location with room around the heat sink for airflow. Use appropriately sized power, ground, speaker, and RCA wiring, and observe the amplifier's 2-ohm minimum stereo impedance and 4-ohm minimum bridged impedance. Its external 100A fuse requirement and 2 AWG power\/ground terminals should be considered when planning the vehicle electrical installation.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631906906182,"sku":"BRL1600-4","price":475.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61IouQXSlcL.jpg?v=1784386466"},{"product_id":"hifonics-brl2000-1-brutus-2000w-mono-car-amplifier","title":"Hifonics BRL2000.1 Brutus 2000W Mono Car Amplifier","description":"\u003cp\u003eThe Hifonics Brutus BRL2000.1 is a mono car audio amplifier designed to power a subwoofer system with substantial output from a compact chassis. It is rated to deliver up to 2,000 watts RMS into a 1-ohm load, with additional power ratings for 2-ohm and 4-ohm systems. It is intended for universal vehicle installation and works as a dedicated low-frequency amplifier.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to listeners building or upgrading a bass-focused system that needs a single mono channel. Its variable crossover controls and bass boost allow the subwoofer output to be tailored to the rest of the audio system. A wired bass remote is included for convenient level adjustment from the driver's seat.\u003c\/p\u003e\u003cp\u003eThe BRL2000.1 uses Hifonics Super D Class topology and a half-bridge design intended to support efficient power delivery. Its iron-core transformer and ultra-low EMI-oriented power supply design are engineered to help reduce interference with vehicle electronics. Ultra-Fi MOSFET output devices and a mass-loaded extruded aluminum heat sink support output performance and thermal management.\u003c\/p\u003e\u003cp\u003eA selectable illuminated logo provides constant blue lighting, VU meter operation, or an off setting. In VU meter mode, the logo responds to audio level and can assist with gain adjustment. The amplifier also includes delayed turn-on circuitry to help minimize unwanted turn-on and turn-off noise.\u003c\/p\u003e\u003cp\u003eThe BRL2000.1 fits into a system using RCA-level signal connections and a properly matched subwoofer load. Its secure molded power, ground, and speaker terminals are angled for access and cleaner wire routing. Built-in protection circuits monitor over- and under-voltage, short circuit, overcurrent, and thermal conditions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W RMS at 1 Ohm:\u003c\/strong\u003e Provides high-output mono amplification for a properly matched subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper D Class Topology:\u003c\/strong\u003e Supports efficient power delivery in a compact mono amplifier design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable VU Meter Logo:\u003c\/strong\u003e Offers blue illumination, audio-responsive VU operation, or an off setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossovers:\u003c\/strong\u003e Lets you adjust high-pass and low-pass filtering for system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Remote:\u003c\/strong\u003e Allows remote adjustment of bass level relative to the amplifier setting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Protection Circuits:\u003c\/strong\u003e Includes safeguards for voltage, current, short-circuit, and thermal conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL2000.1 has a black chassis with a mass-loaded extruded aluminum heat sink for thermal management. Its multi-layer printed circuit board uses surface-mount components for a clean internal layout. Nickel-plated RCA inputs are designed for corrosion-resistant signal connections, while the molded terminals provide dedicated power, ground, and speaker connection points.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a location with ventilation and access to its controls and terminals. Use appropriately sized power, ground, speaker, and external fuse wiring; the amplifier accepts 2 AWG power and ground cable and 12 AWG speaker wire. Match the subwoofer wiring to a supported 1-ohm, 2-ohm, or 4-ohm load, then set gain, crossover, and bass boost carefully during system tuning.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631908118598,"sku":"BRL2000-1","price":401.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ExPOJa06L.jpg?v=1784386533"},{"product_id":"hifonics-brl3000-1-3000w-mono-block-car-amplifier","title":"Hifonics BRL3000.1 3000W Mono Block Car Amplifier","description":"\u003cp\u003eThe Hifonics BRL3000.1 is a mono block car audio amplifier designed to power a dedicated subwoofer system. It delivers rated RMS output at 4-, 2-, and 1-ohm loads, giving installers flexibility when matching compatible subwoofers and final wiring impedance. Its single-channel configuration is intended for bass-focused upgrades rather than full-range speaker amplification.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to listeners building a high-output low-frequency system and needing substantial power from one compact mono chassis. The adjustable high-pass and low-pass crossovers help tailor the amplifier's operating range to the enclosure, subwoofer, and rest of the system. A built-in bass boost control provides additional low-frequency adjustment when used carefully during setup.\u003c\/p\u003e\u003cp\u003eThe BRL3000.1 uses Hifonics Super D Class topology with a half-bridge design, iron-core transformer, and Ultra-Fi MOSFET output devices. Its power supply and circuitry are designed for efficient operation, while the mass-loaded extruded aluminum heat sink supports thermal management. Multi-layer surface-mount PCB construction and an ultra-low-EMI design round out the amplifier's internal architecture.\u003c\/p\u003e\u003cp\u003eFor signal connection, the amplifier uses nickel-plated RCA inputs and accepts low-level input signals from 0.2 to 9 volts. It includes variable electronic crossovers with a 12 dB-per-octave slope, plus gain and bass controls for system adjustment. Signal-sensing remote turn-on and delayed turn-on circuitry help support integration with a range of source-unit setups.\u003c\/p\u003e\u003cp\u003eA selectable illuminated logo can operate in constant blue, VU meter, or off modes. In VU mode, the logo responds to audio level and can provide a visual reference while setting the system. The included wired bass remote adjusts bass level relative to the amplifier's end-panel setting and includes a power\/protection status LED.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3000W RMS At 1 Ohm:\u003c\/strong\u003e Provides high-output mono power for a properly matched subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper D Class Topology:\u003c\/strong\u003e Supports efficient power delivery in a dedicated bass amplifier format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable 12 dB Crossovers:\u003c\/strong\u003e Lets you adjust high-pass and low-pass operating ranges for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVU Meter Logo:\u003c\/strong\u003e Selectable logo lighting can display audio level or remain steadily illuminated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Enables convenient bass-level adjustment from the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Includes voltage, short-circuit, overcurrent, overload, and thermal safeguards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL3000.1 uses a black chassis with a mass-loaded extruded aluminum heat sink for thermal management. Its internal design includes multi-layer PCB construction with surface-mount components, an iron-core transformer, and Ultra-Fi MOSFET output devices. Secure molded power, ground, and speaker terminals are angled to make cable access more practical.\u003c\/p\u003e\u003cp\u003eUse a secure mounting location with adequate ventilation and route power, speaker, and RCA cables carefully through the vehicle. Hifonics specifies 0 AWG power cable and an external 300A fuse for this model; final subwoofer wiring must not present less than a 1-ohm load. Set gain, crossover points, and bass boost conservatively, then use the included wired remote for day-to-day bass-level adjustment.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631908151366,"sku":"BRL3000-1","price":472.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51QSdQdJqvL.jpg?v=1784386596"},{"product_id":"hifonics-brl6000-1-6000w-mono-block-amplifier","title":"Hifonics BRL6000.1 6000W Mono Block Amplifier","description":"\u003cp\u003eThe Hifonics BRL6000.1 is a mono block car audio amplifier for high-output subwoofer systems. It delivers rated power at 4-, 2-, and 1-ohm loads, allowing installers to match the amplifier to a properly wired subwoofer setup. Its mono-only configuration makes it a focused choice for adding dedicated bass amplification to a vehicle.\u003c\/p\u003e\u003cp\u003eAt 1 ohm, the BRL6000.1 is rated for 6,000 watts RMS through one channel. It is also rated at 4,200 watts RMS at 2 ohms and 2,400 watts RMS at 4 ohms. Variable high-pass and low-pass crossovers, bass boost, and a built-in bass control provide useful adjustment for system tuning.\u003c\/p\u003e\u003cp\u003eThis amplifier uses a Super D Class design with a half-bridge power architecture, Ultra-Fi MOSFET output devices, and an iron-core transformer. Its Intelligent Power Management System is designed to support stable operation in demanding mobile-audio installations. A wide 10 Hz to 10 kHz frequency response and 0.2 to 9V input range support flexible integration with compatible source units.\u003c\/p\u003e\u003cp\u003eThe BRL6000.1 combines high-output hardware with practical protection and monitoring features. It includes over\/under-voltage, short-circuit, overcurrent, and thermal safeguards. The illuminated logo can be set for constant blue lighting, VU meter operation, or switched off entirely.\u003c\/p\u003e\u003cp\u003eFor complete bass-system control, the included wired bass remote adjusts level relative to the amplifier's onboard setting. Its status LED shows green when the amplifier is powered and red when protection is active. The amplifier is suited to systems that can accommodate its 1-ohm capability, external 500A fuse requirement, and heavy-gauge power wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6,000W RMS At 1 Ohm:\u003c\/strong\u003e Supplies high-output mono power for a correctly matched subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper D Class Design:\u003c\/strong\u003e Provides an efficient amplification platform for mobile audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossovers:\u003c\/strong\u003e Lets installers tailor high-pass and low-pass frequency settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In VU Meter Logo:\u003c\/strong\u003e Displays audio-level activity when VU mode is selected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Allows convenient bass-level adjustment from the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Monitors voltage, current, thermal, and short-circuit conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL6000.1 uses a mass-loaded extruded aluminum heat sink, multi-layer PCB construction with surface-mount components, nickel-plated RCA connections, and secure molded terminals. Its angled connection layout helps provide access to power, ground, speaker, and signal connections. The amplifier also uses an iron-core transformer and Ultra-Fi MOSFET output devices as part of its power-stage design.\u003c\/p\u003e\u003cp\u003eUse this amplifier in a mono subwoofer system wired no lower than its 1-ohm rated load. The 12V and ground terminals accept 0 AWG cable, the speaker terminals accept 12 AWG cable, and an external 500A fuse is specified. Set gain, crossover points, and bass boost carefully, and mount the amplifier on a secure surface with adequate airflow.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631908216902,"sku":"BRL6000-1","price":826.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51UEr9EOoaL.jpg?v=1784386647"},{"product_id":"hifonics-brl800-4-4-channel-car-audio-amplifier","title":"Hifonics BRL800.4 4-Channel Car Audio Amplifier","description":"\u003cp\u003eThe Hifonics BRL800.4 is a four-channel car audio amplifier designed to add dedicated power to upgraded speakers or support a mixed speaker-and-subwoofer system. It provides four amplified channels in a compact full-range format, making it suitable for vehicles where a factory or aftermarket head unit needs more output capability. Its universal vehicle fitment means installation planning is based on available mounting space and the vehicle's electrical system.\u003c\/p\u003e\u003cp\u003eRated for 125 watts RMS per channel at 4 ohms or 200 watts RMS per channel at 2 ohms, the BRL800.4 can power four speakers with substantial headroom. It can also be configured for two-channel bridged operation, producing 400 watts RMS per bridged channel at 4 ohms. This flexibility supports conventional four-speaker upgrades as well as systems that use one channel pair for speakers and another bridged pair for compatible subwoofers.\u003c\/p\u003e\u003cp\u003eThe amplifier uses Hifonics Super D Class architecture with a Class-D chipset and half-bridge design. This approach is intended to provide efficient power delivery across its 15Hz-30kHz frequency response range. An iron-core transformer, Ultra-Fi MOSFET output devices, and an ultra-low-EMI design are part of its power and output-stage construction.\u003c\/p\u003e\u003cp\u003eBuilt-in variable high-pass and low-pass filters allow each channel pair to be tailored for the speakers connected to it. Both filters adjust from 40Hz to 2kHz at a 12dB-per-octave slope, while the built-in bass control provides additional system adjustment. The 0.2-9V input range accommodates a broad range of source-unit signal levels.\u003c\/p\u003e\u003cp\u003eThe BRL800.4 incorporates Intelligent Power Management System protection functions for over-voltage, under-voltage, short-circuit, overcurrent, and thermal conditions. Its illuminated logo can be set to constant blue lighting, VU meter operation, or off. The VU display can provide a visual indication of audio level during setup, while final gain setting should be performed with appropriate tuning practices.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Powers four speakers or supports stereo and bridged system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800 Watts RMS Total:\u003c\/strong\u003e Delivers up to 4 x 200 watts RMS at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Capability:\u003c\/strong\u003e Produces 2 x 400 watts RMS at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters help match amplifier output to speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVU Meter Logo:\u003c\/strong\u003e Select constant blue illumination, audio-reactive VU mode, or off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Helps guard against voltage, current, short-circuit, and thermal faults.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRL800.4 uses a black chassis with a mass-loaded extruded aluminum heat sink for thermal management. Its construction includes a multilayer surface-mount PCB, iron-core transformer, Ultra-Fi MOSFET output devices, nickel-plated RCA jacks, and angled molded connection terminals. These elements are designed to keep connections accessible while maintaining a clean wiring profile.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a location with adequate airflow and avoid mounting it upside down. Use a properly fused power connection, a short and secure chassis ground, and speaker wiring that maintains a 2-ohm minimum load per unbridged channel or 4 ohms per bridged channel. The amplifier accepts RCA inputs and supports speaker-level inputs for integration with compatible factory or aftermarket source units.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631908282438,"sku":"BRL800-4","price":311.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Ud_Q78qQL.jpg?v=1784386704"},{"product_id":"xtremevision-xv-30tt-analog-car-tv-tuner-system","title":"XtremeVision XV-30TT Analog Car TV Tuner System","description":"\u003cp\u003eThe XtremeVision XV-30TT is an analog car TV tuner system designed to add television reception and auxiliary-video switching to a compatible in-vehicle display setup. It provides selectable TV, AV1, and AV2 operating modes, giving users a central source-selection point for a vehicle video system. This model is intended for installations using an external monitor or display with an AV input.\u003c\/p\u003e\u003cp\u003eThe XV-30TT is suited to vehicles equipped with aftermarket or auxiliary video screens where analog television service is applicable. Its two video inputs allow compatible external AV sources to be connected alongside the tuner. A single AV output sends the selected source onward to a compatible display or video component.\u003c\/p\u003e\u003cp\u003eThis is a video-tuner component rather than a car stereo, amplifier, or digital media receiver. Its performance role is analog TV reception and video-source selection, not audio amplification or smartphone integration. It does not provide Apple CarPlay or Android Auto functionality.\u003c\/p\u003e\u003cp\u003eOn-screen display functionality is specified for viewing and controlling available tuner functions through the connected screen. A remote control is also specified, offering an alternative to direct interaction with the installed system. These features can be useful when the tuner is mounted away from the primary viewing position.\u003c\/p\u003e\u003cp\u003eThe XV-30TT can serve as an add-on video source in a rear-seat, overhead, or auxiliary-monitor installation where analog broadcast compatibility has been confirmed. Verify the local television standard, the monitor's AV connection requirements, and all vehicle wiring needs before purchase. Listed product information specifically states that this tuner does not work in the United States.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog Car TV Tuner:\u003c\/strong\u003e Adds analog television tuning where the local broadcast system is compatible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTV\/AV1\/AV2 Selection:\u003c\/strong\u003e Lets the connected display switch among tuner and auxiliary-video sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Video Inputs:\u003c\/strong\u003e Supports connection of up to two compatible external video sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne AV Output:\u003c\/strong\u003e Sends the selected video source to a compatible display or component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn-Screen Display:\u003c\/strong\u003e Presents tuner functions through the connected video screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Control:\u003c\/strong\u003e Provides remote operation of supported tuner functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XV-30TT is a dedicated tuner-and-video-switching component with separate TV, AV1, and AV2 source selections. Published product information does not identify its enclosure materials, dimensions, weight, or mounting hardware, so those details should be confirmed with the seller before planning an installation. Its functional layout centers on analog TV tuning, two video inputs, one AV output, on-screen display, and remote operation.\u003c\/p\u003e\u003cp\u003eInstallation requires a compatible vehicle video display or other component that can accept the unit's AV output. Connect external video sources to the two video inputs as needed, then select TV, AV1, or AV2 through the system controls. Confirm local analog broadcast compatibility before installation; the listed product information states that the XV-30TT does not work in the United States.\u003c\/p\u003e","brand":"XtremeVision","offers":[{"title":"Default Title","offer_id":45668523868230,"sku":"XV-30TT","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_b59fd91f-94ca-4257-a7a3-dae5fc0ddcbd.webp?v=1784455263"},{"product_id":"xtremevision-xv-50lcc-license-plate-frame-backup-camera-kit","title":"XtremeVision XV-50LCC License Plate Frame Backup Camera Kit","description":"\u003cp\u003eThe XtremeVision XV-50LCC is a wired rear-view camera kit built into a U.S.-style license plate frame. It adds a camera view and parking-assistance alerts to vehicles that need extra rearward visibility while reversing. Its frame-mounted format is intended for drivers who prefer an alternative to drilling a bumper for separate parking sensors.\u003c\/p\u003e\u003cp\u003eA 170-degree wide-angle camera is designed to show a broad area behind the vehicle, helping the driver monitor obstacles and positioning during parking. The CMOS image sensor supplies the rear-view video feed for a compatible display. Distance scale lines and a trapezoid ruler function provide additional visual references while backing up.\u003c\/p\u003e\u003cp\u003eThe XV-50LCC incorporates three parking sensors in the license plate frame assembly. These sensors provide audible parking assistance as obstacles approach, with increasing alert frequency at closer distances. Voice-prompt distance alerts are also listed for the system.\u003c\/p\u003e\u003cp\u003eFor lower-light reversing situations, the camera uses automatic LED illumination controlled by a photoresistor. The lighting activates in dim conditions and switches off when ambient light is sufficient. Its IP67 weather-resistance rating is intended to support exterior mounting through normal rain, dust, and road-weather exposure.\u003c\/p\u003e\u003cp\u003eThis camera kit is suited to an aftermarket rear-view upgrade when paired with a compatible video display or head unit. It uses a 12-volt DC power connection and a yellow video-output connection. The license plate frame design fits standard U.S. license plates and includes mounting hardware for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e170° Wide-Angle Camera:\u003c\/strong\u003e Covers a broad rearward viewing area for reversing and parking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Integrated Parking Sensors:\u003c\/strong\u003e Adds obstacle-detection assistance without separate bumper-mounted sensors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMOS Image Sensor:\u003c\/strong\u003e Provides the camera video feed for a compatible rear-view display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic LED Lighting:\u003c\/strong\u003e Activates in low ambient light to support nighttime visibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistance Guide Display:\u003c\/strong\u003e Scale lines and trapezoid ruler markings aid parking alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Weather Resistance:\u003c\/strong\u003e Supports exterior license-plate-frame installation in changing weather conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XV-50LCC combines a camera, three parking sensors, and lighting in a chrome-plated license plate frame. The exterior-mounted assembly is rated IP67 for resistance to water and dust. Its camera is designed around a 170-degree viewing angle, while the parking-sensor system has an adjustable 110-degree sensor angle.\u003c\/p\u003e\u003cp\u003eMount the frame at the vehicle's rear license plate location using the included screws, washers, nuts, rubber pieces, and hex wrench. Connect the red socket to 12-volt DC power and the yellow socket to the vehicle's compatible video display input. Confirm clearance around the plate area and route wiring safely away from heat, moving parts, and sharp edges.\u003c\/p\u003e","brand":"XtremeVision","offers":[{"title":"Default Title","offer_id":45668524425286,"sku":"XV-50LCC","price":98.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_28fbe3b7-d315-4cad-99b4-832bed468206.webp?v=1784455297"},{"product_id":"xtremevision-xv-105mt-5-motorcycle-carplay-display","title":"Xtremevision XV-105MT 5\" Motorcycle CarPlay Display","description":"\u003cp\u003eThe Xtremevision XV-105MT is a 5-inch motorcycle-mounted smart display designed to bring wireless Apple CarPlay and Android Auto to a rider’s cockpit. It gives compatible smartphone users access to navigation, calls, messages, and music through a dedicated touchscreen rather than handling a phone while riding. The compact display format is intended for motorcycles that do not have built-in smartphone integration.\u003c\/p\u003e\u003cp\u003eWireless phone integration keeps commonly used ride information and entertainment controls within view on the 5-inch IPS touchscreen. Voice-command support through the connected phone can help riders access compatible functions with less interaction at the screen. The anti-glare display treatment is intended to improve visibility in bright outdoor conditions.\u003c\/p\u003e\u003cp\u003eThe XV-105MT also combines its connectivity features with a front and rear 1080P camera system. Both cameras support ride recording, while loop recording is designed to continue capturing footage by overwriting older files when storage becomes full. A 64GB TF card is included for recording storage.\u003c\/p\u003e\u003cp\u003eFor audio integration, the display supports Bluetooth and FM transmitter functions, with USB and AUX connectivity also listed. EQ adjustment allows the audio output to be tailored to the connected listening setup. This makes the unit suitable for riders using compatible Bluetooth headsets, motorcycle speakers, or other supported audio connections.\u003c\/p\u003e\u003cp\u003eBuilt for exterior motorcycle use, the XV-105MT is rated IP67 for resistance to water and dust. Its detachable anti-theft mount allows the display to be removed when the motorcycle is parked. It is a practical upgrade for riders seeking smartphone projection, recording cameras, and audio-routing features in one handlebar-mounted system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless CarPlay and Android Auto:\u003c\/strong\u003e Brings compatible phone navigation, calls, messages, and music to the motorcycle display.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 1080P Cameras:\u003c\/strong\u003e Records views ahead of and behind the motorcycle for ride documentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop Recording:\u003c\/strong\u003e Continues recording by replacing older footage when card storage is full.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch IPS Touchscreen:\u003c\/strong\u003e Provides a compact touch interface with an anti-glare viewing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth and FM Transmitter:\u003c\/strong\u003e Offers wireless audio-routing options for compatible listening systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Weather Protection:\u003c\/strong\u003e Helps protect the display from rain, dust, and normal outdoor riding conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XV-105MT uses a motorcycle-oriented, weather-resistant display design with an IP67 rating and a detachable mounting arrangement. Its 5-inch IPS touchscreen is specified with an anti-glare surface for outdoor use. The removable display design can be useful when parking in locations where taking the screen with you is preferred.\u003c\/p\u003e\u003cp\u003eMount the display securely where it is visible without obstructing the motorcycle’s controls or gauges, then route the camera, power, and audio connections away from steering movement, heat, and pinch points. Install the front and rear cameras in protected positions with clear forward and rearward views. Pair a compatible phone for wireless CarPlay or Android Auto, then configure the preferred Bluetooth, FM transmitter, USB, or AUX audio connection as needed.\u003c\/p\u003e","brand":"XtremeVision","offers":[{"title":"Default Title","offer_id":45668525113414,"sku":"XV105MT","price":184.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_1105fee3-0a80-44cd-a7b6-f5b673721ac9.webp?v=1784455335"},{"product_id":"xtremevision-xv-98mr-9-66-wireless-carplay-dash-cam","title":"Xtremevision XV-98MR 9.66\" Wireless CarPlay Dash Cam","description":"\u003cp\u003eThe Xtremevision XV-98MR is a 9.66-inch touchscreen driving display and dual-camera dash cam designed to add smartphone integration and road recording to a wide range of vehicles. It provides wireless Apple CarPlay and Android Auto access without replacing the factory radio. This makes it a practical option for drivers who want navigation, calls, music, and compatible phone apps available from a dedicated in-car screen.\u003c\/p\u003e\u003cp\u003eWireless smartphone connectivity uses Bluetooth and Wi-Fi, helping keep the dashboard setup free of a required phone cable during normal use. The touchscreen and voice-control support are intended to make common phone functions easier to access while driving. Bluetooth hands-free calling and music playback add further connectivity options for everyday commuting and longer trips.\u003c\/p\u003e\u003cp\u003eThe XV-98MR combines its display functions with front and rear 1080P dash cameras. Both cameras are specified with 1080P recording, providing coverage ahead of and behind the vehicle. Night vision support is included to help the cameras capture footage in lower-light driving conditions.\u003c\/p\u003e\u003cp\u003eFor recording continuity, the unit supports loop recording, which overwrites older recordings when storage becomes full. It also lists 24-hour parking monitoring with motion detection and impact sensing for vehicle surveillance while parked. These functions are intended to retain relevant recorded events without requiring manual file management after every drive.\u003c\/p\u003e\u003cp\u003eThe large 9.66-inch screen supports split-screen use, allowing compatible navigation information and camera viewing to be displayed together. Audio can be routed to a vehicle sound system through the built-in FM transmitter, while Bluetooth supports calls and music functions. With a stated 7–32V operating range and universal vehicle compatibility, it is positioned for cars, trucks, and buses.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless CarPlay and Android Auto:\u003c\/strong\u003e Connects compatible smartphones through Bluetooth and Wi-Fi without a required cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.66-Inch Touchscreen:\u003c\/strong\u003e Provides a large dedicated display for driving, phone, and camera functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 1080P Cameras:\u003c\/strong\u003e Records front and rear views for broader driving coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNight Vision:\u003c\/strong\u003e Supports clearer camera recording in lower-light conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking Monitoring:\u003c\/strong\u003e Uses motion detection and impact sensing for parked-vehicle surveillance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFM Audio Transmission:\u003c\/strong\u003e Sends audio to a compatible vehicle radio through an FM frequency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XV-98MR uses a wide 9.66-inch HD touchscreen layout intended for dashboard visibility and touch operation. Available product information identifies its display, camera, wireless, and monitoring functions, but does not specify enclosure materials or mounting hardware construction. Its split-screen capability is designed to keep compatible navigation and camera views accessible from one display.\u003c\/p\u003e\u003cp\u003eConfirm a suitable mounting location that preserves the driver’s view and allows the front and rear cameras to be aimed correctly. The unit is specified for 7–32V vehicles and is described as suitable for cars, trucks, and buses. Route camera and power wiring securely, and use the FM transmitter when audio playback through the existing vehicle radio is desired.\u003c\/p\u003e","brand":"XtremeVision","offers":[{"title":"Default Title","offer_id":45668526653510,"sku":"XV98MR","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_26aa9822-a16a-4403-9a34-60c35e680065.webp?v=1784455407"},{"product_id":"shure-ksm32c-hm-cardioid-condenser-microphone","title":"Shure KSM32C\/HM ¾\" Cardioid Condenser Microphone","description":"\u003cp\u003eThe Shure KSM32C\/HM is a cardioid condenser microphone stage kit designed for detailed vocal, instrument, overhead, and ensemble recording. Its focused pickup pattern helps reduce unwanted room sound and nearby-source bleed when recording in less-than-perfect acoustic spaces. The included hard mount, windscreen, carrying case, and threaded adapter make it a practical package for studio and stage-oriented setups.\u003c\/p\u003e\u003cp\u003eBuilt around a Shure-designed ¾-inch embossed Mylar diaphragm capsule, the KSM32C is voiced for a smooth and even response rather than pronounced tonal emphasis. It delivers extended low-frequency performance associated with larger capsules while retaining a compact physical format. This makes it suited to sources where natural tone, transient detail, and controlled placement matter.\u003c\/p\u003e\u003cp\u003eThe cardioid pattern provides up to 37 dB of rear rejection at 180 degrees, helping keep reflections and surrounding instruments out of the microphone signal. With an 11 dBA typical self-noise specification and 83 dB signal-to-noise ratio, it is equipped for recording quieter and more detailed material. Its neutral response also gives engineers a flexible starting point for later EQ and dynamics processing.\u003c\/p\u003e\u003cp\u003eA selectable 15 dB pad expands the microphone's ability to work with high-SPL sources such as drums, guitar amplifiers, horns, and percussion. The three-position low-frequency filter provides flat response, a 115 Hz rolloff, or an 80 Hz cutoff to help manage proximity effect, vibration, and low-frequency buildup. These controls allow the microphone to adapt to different sources without adding external inline attenuation.\u003c\/p\u003e\u003cp\u003eThe KSM32C\/HM connects through a balanced three-pin XLR output and requires standard 48 V phantom power. Its lightweight machined anodized aluminum housing is intended for dependable placement on boom stands and mic stands. It is a useful upgrade for creators and engineers who need a dedicated large-diaphragm-style condenser sound with controlled off-axis behavior in a compact microphone.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e¾-Inch Electret Capsule:\u003c\/strong\u003e Embossed Mylar diaphragm supports smooth, detailed capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Pickup Pattern:\u003c\/strong\u003e Focuses on the source and reduces rearward sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Self-Noise:\u003c\/strong\u003e 11 dBA typical self-noise supports detailed recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 dB Pad:\u003c\/strong\u003e Handles louder sources with increased headroom.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Position Low Cut:\u003c\/strong\u003e Helps manage rumble, vibration, and proximity effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage Kit Accessories:\u003c\/strong\u003e Includes hard mount, windscreen, case, and adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KSM32C uses a machined, anodized aluminum-alloy housing with a precision-machined steel grille. Its compact all-metal construction is lightweight at 265 g while providing a durable format for studio and live-sound use. The capsule uses a gold-layered design behind the grille, and the microphone body includes accessible pad and frequency-response switches.\u003c\/p\u003e\u003cp\u003eConnect the microphone's male XLR output to a balanced XLR microphone input on a mixer, audio interface, or preamp that supplies 48 V phantom power. Mount it with the included swivel-mount mic clamp, then use the flat setting for full-range capture or select one of the low-frequency filters when controlling rumble or proximity effect is useful. The included flocked foam windscreen can help reduce light wind and breath noise, while the zippered case supports protected transport and storage.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45668958830662,"sku":"KSM32C\/HM","price":659.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ux4-CWNCL.jpg?v=1784474441"},{"product_id":"shure-ksm40c-1-cardioid-condenser-microphone","title":"Shure KSM40C 1\" Cardioid Condenser Microphone","description":"\u003cp\u003eThe Shure KSM40C is a large-diaphragm, side-address condenser microphone designed for detailed studio recording. Its cardioid pickup pattern helps focus on the intended source while reducing surrounding room sound and bleed. It is suited to vocal recording, voiceover, acoustic instruments, guitar amplifiers, upright bass, and kick drum applications.\u003c\/p\u003e\u003cp\u003eA precision-engineered 1-inch single-diaphragm capsule gives the KSM40C a full low-frequency character with smooth high-frequency detail. Its response is designed to capture vocal presence and instrument nuance without emphasizing sharp upper-frequency resonances. The uniform cardioid pattern also provides a predictable starting point when positioning the microphone.\u003c\/p\u003e\u003cp\u003eWith 7.5 dBA self-noise and an 86.5 dB signal-to-noise ratio, the KSM40C is equipped for quiet sources and detailed recording work. Its sensitivity of -33.5 dBV\/Pa helps it produce a healthy output for compatible microphone preamps. A selectable 15 dB pad increases headroom for loud sources such as drums, horns, and guitar cabinets.\u003c\/p\u003e\u003cp\u003eThe microphone includes a three-position low-frequency filter for adapting to the recording environment and source placement. Choose flat response for a natural capture, a 115 Hz rolloff to help manage proximity effect, or an 80 Hz high-pass cutoff to reduce low-frequency room noise. These controls make it easier to tailor the microphone before processing.\u003c\/p\u003e\u003cp\u003eThe KSM40C is supplied as a complete studio-ready package with a shock mount, magnetic pop filter, swivel hard mount, carrying case, replacement shock-mount bands, and threaded adapter. It connects through a balanced 3-pin XLR output and requires phantom power from a mixer, audio interface, or dedicated microphone preamp. This makes it a practical upgrade for a recording chain built around a quality XLR input and 48 V phantom power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Capsule:\u003c\/strong\u003e Large single-diaphragm design captures detailed sound with substantial low-end response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Pickup:\u003c\/strong\u003e Focuses on the sound source while helping reduce room and off-axis bleed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Self-Noise:\u003c\/strong\u003e 7.5 dBA self-noise supports clean recording of quieter performances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 dB Pad:\u003c\/strong\u003e Adds headroom for louder instruments, amplifiers, horns, and drums.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Position Low Cut:\u003c\/strong\u003e Provides flat, 115 Hz rolloff, and 80 Hz cutoff settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Accessory Suite:\u003c\/strong\u003e Includes shock mount, magnetic pop filter, case, hard mount, bands, and adapter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KSM40C uses a machined, anodized aluminum-alloy housing for a durable but relatively lightweight microphone body. Its precision-machined steel grille protects the gold-layered capsule, while the included shock mount helps isolate the microphone from stand-borne vibration. The magnetic pop filter attaches to the shock mount to help reduce plosive sounds during close vocal recording.\u003c\/p\u003e\u003cp\u003eConnect the microphone to a balanced XLR microphone input with phantom power enabled; 48 V DC is specified for full performance. Shure recommends a preamp input impedance of at least 1,000 ohms. Mount it on a stable boom stand using the supplied shock mount or swivel hard mount, then select the pad and low-frequency filter appropriate for the source and placement.\u003c\/p\u003e","brand":"Shure","offers":[{"title":"Default Title","offer_id":45668960305222,"sku":"KSM40C","price":879.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71iMCbgTcCL.jpg?v=1784474520"},{"product_id":"zoom-aph-5s-h5studio-accessory-pack","title":"Zoom APH-5s H5studio Accessory Pack","description":"\u003cp\u003eThe Zoom APH-5s is an accessory pack made specifically for the Zoom H5studio Handy Recorder. It gathers four practical items for protecting, powering, and connecting the recorder during location recording and desktop use. The H5studio recorder itself is not included.\u003c\/p\u003e\u003cp\u003eThis pack is intended for podcasters, musicians, videographers, field recordists, and other H5studio users who need a more complete portable setup. The padded shell case helps protect the recorder while traveling or storing it with essential accessories. A dedicated WSH-5s hairy windscreen supports cleaner outdoor capture when wind is a concern.\u003c\/p\u003e\u003cp\u003eThe WSH-5s windscreen is designed to reduce wind noise while remaining acoustically transparent. This helps preserve the natural character of recordings without placing an overly muffled barrier in front of the H5studio's microphone capsule. It is a useful addition for interviews, ambient recording, and camera-oriented audio work outdoors.\u003c\/p\u003e\u003cp\u003eFor powered sessions, the included Zoom AD-17 USB AC adapter can supply power to the H5studio. The included USB-C cable supports data transfer and use of the recorder's audio-interface modes. Together, these accessories simplify setups that move between recording, file transfer, and computer-based audio work.\u003c\/p\u003e\u003cp\u003eThe APH-5s fits naturally into an H5studio upgrade path by adding protection, wind control, AC power, and USB connectivity in one package. It is not a car-audio product and does not add speakers, amplification, or signal processing. It is a focused accessory solution for users who already own, or plan to purchase, the compatible H5studio recorder.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH5studio-Specific Pack:\u003c\/strong\u003e Designed as an accessory package for the Zoom H5studio Handy Recorder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWSH-5s Windscreen:\u003c\/strong\u003e Hairy windscreen helps reduce wind noise during outdoor recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustically Transparent Design:\u003c\/strong\u003e Windscreen is designed to limit wind interference without muffling sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePadded Shell Case:\u003c\/strong\u003e Helps protect the recorder during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAD-17 USB AC Adapter:\u003c\/strong\u003e Provides an AC-powered option for compatible H5studio operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Cable Included:\u003c\/strong\u003e Supports data transfer and H5studio audio-interface use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APH-5s is a compact accessory bundle rather than an electronic recorder or audio component. Its practical design combines a padded protective case, recorder-fit windscreen, USB AC adapter, and USB-C cable for H5studio users. Each included item addresses a routine handling, protection, power, or connectivity need.\u003c\/p\u003e\u003cp\u003eNo vehicle installation, speaker wiring, or amplifier matching is required. Place the H5studio in the padded shell case for transport, fit the WSH-5s windscreen over the recorder's microphone area when recording in wind, and connect the AD-17 and USB-C cable when using compatible AC power, data transfer, or audio-interface functions. Confirm that the supplied AC adapter version matches the local mains outlet and voltage requirements before use.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669220712518,"sku":"ZAPH5s","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81KVC_9XH1L.jpg?v=1784483306"},{"product_id":"zoom-aph-6s-h6studio-accessory-pack","title":"Zoom APH-6s H6studio Accessory Pack","description":"\u003cp\u003eThe Zoom APH-6s is an accessory pack assembled for the Zoom H6studio Handy Recorder. It brings together practical items for carrying, wind protection, USB connectivity, and AC power in one package. It is intended for creators who use an H6studio for field recording, interviews, music capture, podcasting, or location work.\u003c\/p\u003e\u003cp\u003eThe included WSH-5s hairy windscreen helps reduce wind noise when recording outdoors or in moving air. Its design is made to remain acoustically transparent, helping preserve the recorder's captured sound while adding a layer of environmental protection. This makes the pack useful when the H6studio is used away from a controlled indoor recording space.\u003c\/p\u003e\u003cp\u003eA padded shell case is included to help protect the recorder during transport and storage. The case gives H6studio owners a dedicated way to carry their recorder between sessions without relying on loose packing or an unpadded bag. It is a practical addition for mobile recording setups.\u003c\/p\u003e\u003cp\u003eThe package also includes a Zoom AD-17 USB-type AC adapter and a USB-C cable. The adapter can power the compatible recorder, while the cable supports data transfer or use of the recorder's audio-interface modes. The supplied AC adapter version is matched to the voltage and plug type for the country where the package is sold.\u003c\/p\u003e\u003cp\u003eThe APH-6s fits naturally into an H6studio setup as a focused utility upgrade rather than an audio-processing device. It complements the recorder with the essential accessories commonly needed for mobile use and desktop connection. The H6studio recorder itself is not included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eH6studio Accessory Pack:\u003c\/strong\u003e Supplies core carrying, windscreen, power, and USB accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWSH-5s Windscreen:\u003c\/strong\u003e Reduces wind noise while remaining acoustically transparent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePadded Shell Case:\u003c\/strong\u003e Helps protect the recorder during transport and storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAD-17 USB Adapter:\u003c\/strong\u003e Provides AC power for the compatible recorder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Cable:\u003c\/strong\u003e Supports data transfer and audio-interface operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry-Specific AC Plug:\u003c\/strong\u003e Adapter matches local voltage and plug requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APH-6s combines a padded shell case with purpose-built recording accessories for a compact, organized kit. The windscreen is designed for the recorder's microphone area, while the included cable and adapter support the H6studio's USB-based connectivity and power needs. Each item serves a specific mobile-recording function without adding permanent modifications to the recorder.\u003c\/p\u003e\u003cp\u003eTo use the pack, place the H6studio in the padded shell case for transport and fit the WSH-5s windscreen when recording in wind-prone environments. Connect the AD-17 adapter and USB-C cable when AC power, data transfer, or audio-interface use is needed. Confirm that the AC adapter supplied with the package is appropriate for the country of purchase before connecting it to mains power.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669220810822,"sku":"ZAPH6s","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/814b5-RjJtL.jpg?v=1784483368"},{"product_id":"boss-px-1-plugout-fx-multi-effects-pedal","title":"BOSS PX-1 Plugout FX Multi-Effects Pedal","description":"\u003cp\u003eThe BOSS PX-1 Plugout FX is a compact guitar effects pedal designed to place a selection of classic BOSS effect recreations in one configurable stompbox. It helps players reduce pedalboard space while retaining a familiar pedal-style control approach. The unit operates one selected effect at a time, allowing it to function as a focused drive, modulation, filter, pitch, or delay pedal within a larger rig.\u003c\/p\u003e\u003cp\u003eThe PX-1 is intended for guitarists and bassists who want to explore historic BOSS effect models without dedicating separate space to each individual pedal. It includes 16 supplied effect models, ranging from OD-1 overdrive and DS-1 distortion to CE-2 chorus, OC-2 octave, and DD-2 delay. Additional compatible models can be loaded through the BOSS Effect Loader app using separately purchased Model Passes.\u003c\/p\u003e\u003cp\u003eIts processing is built around dedicated DSP operation for one effect at a time, with model-specific controls shown on the onboard graphic display. Three parameter knobs provide direct adjustment, while the pedal switch controls bypass and assigned functions. Buffered bypass supports integration into conventional pedalboard signal chains.\u003c\/p\u003e\u003cp\u003eStereo inputs and outputs allow the PX-1 to work in mono or stereo guitar systems, including dual-amp and stereo-monitor setups. Tap tempo and TRS MIDI clock input support synchronized timing for compatible time-based effects. An external control jack accepts compatible footswitches or an expression pedal for parameter control, momentary operation, or effect swapping.\u003c\/p\u003e\u003cp\u003eThe PX-1 can run from its included AC adaptor or from USB bus power, making it suitable for pedalboard, desktop, and computer-connected use. Bluetooth Low Energy MIDI and USB-C provide access to the BOSS Effect Loader app, software updates, and effect loading. It is a practical upgrade path for players who want one compact platform that can be reconfigured as their musical needs change.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e16 Supplied Effect Models:\u003c\/strong\u003e Includes classic BOSS drive, modulation, filter, octave, pitch, and delay recreations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-Effect DSP Platform:\u003c\/strong\u003e Runs one selected effect at a time with dedicated processing resources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo I\/O:\u003c\/strong\u003e Supports mono or stereo routing with dual 1\/4-inch inputs and outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Control Support:\u003c\/strong\u003e Connect compatible footswitches or an expression pedal for expanded hands-free operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTempo Synchronization:\u003c\/strong\u003e Use tap tempo or TRS MIDI clock input with compatible effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth And USB-C:\u003c\/strong\u003e Load effects, connect with the BOSS Effect Loader app, and update the unit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PX-1 uses a compact BOSS pedal-format enclosure with three rotary controls, a pedal switch, CHECK indicator, and 128 x 48-dot graphic LCD. BOSS does not publish a housing-material specification. Its 73 mm width, 125 mm depth, and 56 mm height make it suitable for many pedalboard layouts.\u003c\/p\u003e\u003cp\u003eConnect an instrument or existing effect chain to INPUT A (MONO) for a mono setup, or use both input and output channels for stereo operation. Connect OUTPUT A (MONO) to an amp or monitor system for mono use, and add OUTPUT B for stereo routing. Power the pedal with the supplied AC adaptor or a suitable USB-C power source, then use the BOSS Effect Loader app over Bluetooth or USB-C when loading compatible effect models.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":45669328322630,"sku":"PX-1","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61df9wbiPZL.jpg?v=1784490981"},{"product_id":"boss-xs-100-poly-shifter-pitch-shifting-pedal","title":"BOSS XS-100 Poly Shifter Pitch-Shifting Pedal","description":"\u003cp\u003eThe BOSS XS-100 is an advanced polyphonic pitch-shifting pedal for guitar and bass. It gives players a way to change pitch in real time without physically retuning between songs. The onboard expression pedal supports sweeping pitch effects, while fixed settings support quick alternate-tuning and capo-style applications.\u003c\/p\u003e\u003cp\u003eThis pedal is designed for performers and recording players who need both expressive control and repeatable pitch presets. Its pitch range reaches four octaves up or down, providing an eight-octave total range. Thirty onboard memories allow different pitch, detune, and control setups to be recalled when needed.\u003c\/p\u003e\u003cp\u003eThe XS-100 uses BOSS pitch-shifting algorithms and a dedicated DSP platform to preserve the source instrument's attack and tonal character. It is intended to handle single-note lines, sustained notes, and polyphonic playing with clear tracking. A detune function adds adjustable pitch offset for doubling-style textures.\u003c\/p\u003e\u003cp\u003eThe integrated EXP1 pedal delivers linear pitch control, and its toe switch can be assigned for alternate functions such as momentary pitch changes. Independent pitch-change speeds for upward and downward pedal movement provide further control over how pitch transitions behave. The EFFECT and TUNE DOWN footswitches can also be customized for different performance workflows.\u003c\/p\u003e\u003cp\u003eThe XS-100 fits easily into pedalboard-based guitar or bass rigs and provides a dedicated THRU output that mirrors the input signal for parallel routing. External footswitches or an expression pedal can expand hands-free control. TRS MIDI I\/O supports external MIDI control and allows the pedal and switches to send MIDI commands.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-Octave Pitch Range:\u003c\/strong\u003e Shift pitch across four octaves up or down for expressive sweeps and fixed transposition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Expression Pedal:\u003c\/strong\u003e Control pitch continuously with an onboard pedal and assignable toe switch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixed Semitone Settings:\u003c\/strong\u003e Recall precise pitch changes for drop tunings, capo effects, and alternate sounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetune Control:\u003c\/strong\u003e Adjust pitch offset from -50 to +50 cents for doubling-style effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 Memory Locations:\u003c\/strong\u003e Store and recall complete setups for songs, sessions, or performance changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpanded Rig Connectivity:\u003c\/strong\u003e Add external control, MIDI integration, USB updates, and parallel signal routing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XS-100 uses a pedal-style format with an integrated EXP1 expression pedal, toe switch, two onboard footswitches, a Select knob, and a backlit 64 x 32-dot graphic LCD. Its published dimensions are 147 mm wide by 230 mm deep by 72 mm high, with a maximum height of 96 mm. BOSS does not identify the enclosure material in its published specification sheet.\u003c\/p\u003e\u003cp\u003eConnect an instrument to the INPUT jack and route the OUTPUT jack to the next pedal, amplifier, or processor; use the THRU jack when a mirrored dry input feed is needed. Power is supplied by the included AC adaptor, and the unit draws 160 mA. For added control, connect compatible footswitches or an expression pedal to the CTL1, 2\/EXP2 jack, or use the stereo mini TRS MIDI connectors for MIDI-based rigs.\u003c\/p\u003e","brand":"Boss","offers":[{"title":"Default Title","offer_id":45669350015046,"sku":"XS-100","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81_dhkpGCkL.jpg?v=1784493383"},{"product_id":"arturia-astrolab-88-88-key-hammer-action-stage-keyboard","title":"Arturia ASTROLAB 88 88-Key Hammer-Action Stage Keyboard","description":"\u003cp\u003eThe Arturia ASTROLAB 88 is an 88-key standalone stage keyboard designed to bring a broad library of performance-ready sounds to rehearsals, studios, and live setups without requiring a computer onstage. Its weighted Fatar TP-40L hammer-action keybed, piano-size keys, triple sensors, velocity response, and aftertouch support expressive piano, electric piano, organ, synth, and layered parts. It is a practical choice for players who want one keyboard to cover diverse musical roles while retaining direct hardware control.\u003c\/p\u003e\u003cp\u003eAstroLab 88 includes more than 1,800 onboard presets drawn from 44 reference instruments and 11 synthesis engines. Its sound palette spans virtual analog, samples, wavetable, FM, granular, physical modeling, vector, harmonic, phase-distortion, vocoder, and Karplus-based synthesis. The instrument is built for fast access to usable sounds, with a navigation wheel and screen for browsing and selecting presets.\u003c\/p\u003e\u003cp\u003eFor performance control, the ASTROLAB 88 provides four macro controls labeled Brightness, Timbre, Time, and Movement, along with dedicated effects controls. Chord and Scale modes, an arpeggiator, and a MIDI looper support songwriting, practice, and live arrangement ideas directly from the keyboard. Multis and keyboard splits let players combine or divide sounds across the keybed for more complete parts from one instrument.\u003c\/p\u003e\u003cp\u003eThe keyboard is equipped for stage and studio audio routing with balanced 1\/4-inch TRS line outputs, a headphone output, and a balanced stereo input that can be used with microphone or line-level sources. MIDI DIN input and output support communication with compatible hardware, while USB-C provides computer connectivity and USB-A host capability supports compatible external USB MIDI devices or USB media workflows. Bluetooth audio input and Wi-Fi add wireless connectivity options for playback and control.\u003c\/p\u003e\u003cp\u003eAstroLab 88 fits naturally into an Arturia-centered workflow through included Analog Lab Pro software and AstroLab Connect mobile sound management. Custom sounds created or organized in the software ecosystem can be prepared for performance use on the hardware instrument. It can operate as a standalone keyboard, while its MIDI, USB, audio, and pedal connections allow it to serve as the central performance keyboard in a larger rig.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e88-Key Hammer Action:\u003c\/strong\u003e Weighted Fatar TP-40L keys provide a piano-style playing response with aftertouch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800+ Onboard Presets:\u003c\/strong\u003e Access a broad collection of ready-to-play keyboard and synthesizer sounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e11 Sound Engines:\u003c\/strong\u003e Covers multiple synthesis and sampling approaches in one standalone instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHands-On Performance Controls:\u003c\/strong\u003e Macro, effects, navigation, Chord, Scale, arpeggiator, and looper controls support direct operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStage-Ready Connectivity:\u003c\/strong\u003e Balanced outputs, stereo input, headphones, MIDI DIN, USB, and pedal connections support flexible setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArturia Software Workflow:\u003c\/strong\u003e Includes Analog Lab Pro and works with AstroLab Connect for sound organization and management.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ASTROLAB 88 is built around a weighted Fatar TP-40L hammer-action keybed with piano-size keys, triple sensors, and aftertouch. Its control surface combines a central navigation wheel and display with dedicated preset, macro, and effects controls for direct access during performance. Arturia specifies the instrument at 22.2 kg, so its full-size design is best supported by a stable keyboard stand or piano-style stand rated for its weight.\u003c\/p\u003e\u003cp\u003eConnect the included external power supply, then run the balanced 1\/4-inch TRS outputs to a mixer, audio interface, powered speakers, or DI boxes as appropriate for the system. A sustain pedal, expression pedal, and up to two auxiliary pedals can be connected for hands-free control; compatible MIDI devices can connect through MIDI DIN or USB. Use USB-C for computer integration and software workflow, and use the headphone output for private monitoring.\u003c\/p\u003e","brand":"Arturia","offers":[{"title":"Default Title","offer_id":45669350342726,"sku":"ASTROLAB 88","price":2499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/610SSv9S7GL.jpg?v=1784493538"},{"product_id":"se-electronics-v7-eng-broadcast-dynamic-microphone","title":"sE Electronics V7 ENG Broadcast Dynamic Microphone","description":"\u003cp\u003eThe sE Electronics V7 ENG is a wired handheld dynamic microphone made for electronic news gathering, electronic field production, interviews, commentary, podcasting, and other spoken-word capture. Its extended handle is designed to accept a station identifier or broadcast flag, helping it suit on-camera and field-reporting workflows. A broadcast flag is not included.\u003c\/p\u003e\u003cp\u003eBuilt around the same dynamic capsule platform used in the V7, the V7 ENG is voiced for clear, natural speech with strong intelligibility. Its supercardioid pickup pattern focuses on the person speaking while reducing pickup from the sides and surrounding environment. This can be useful when reporting in busy locations or working close to PA systems.\u003c\/p\u003e\u003cp\u003eThe microphone uses an aluminum voice coil and neodymium magnet in its DMC7 dynamic capsule. Its 40 Hz to 19 kHz frequency range supports speech and vocal capture with useful low-frequency body and upper-frequency detail. With 300-ohm electrical impedance and a standard 3-pin male XLR output, it connects to compatible mixers, recorders, cameras, and audio interfaces.\u003c\/p\u003e\u003cp\u003eFor handheld use, the V7 ENG incorporates a patented integrated shockmount that decouples the capsule from mechanical vibration. This design is intended to reduce handling noise and rumble caused by movement during a report or interview. Internal and included external windscreens help reduce wind noise and plosive sounds.\u003c\/p\u003e\u003cp\u003eThe V7 ENG fits into a professional wired broadcast chain where an XLR microphone is preferred for dependable, direct connection. It can be paired with an XLR cable and a camera, field recorder, mixer, or audio interface with an appropriate microphone input. Its extended 250 mm body adds room for a broadcast flag without changing the familiar handheld microphone format.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast-Ready Extended Handle:\u003c\/strong\u003e Provides space for a station identifier or broadcast flag.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupercardioid Pickup:\u003c\/strong\u003e Helps focus on the speaker and reduce side noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDMC7 Dynamic Capsule:\u003c\/strong\u003e Uses an aluminum voice coil for clear speech capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Shockmount:\u003c\/strong\u003e Helps reduce mechanically transmitted handling noise and rumble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Windscreen Support:\u003c\/strong\u003e Internal and included external windscreens reduce wind and plosives.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Output:\u003c\/strong\u003e Provides a durable 3-pin analog connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V7 ENG has an all-metal zinc-alloy housing and a beveled spring-steel grille. The grille is designed to resist dents and corrosion, while its beveled profile helps keep the microphone from rolling on flat surfaces. The microphone measures 54 mm in diameter and 250 mm long.\u003c\/p\u003e\u003cp\u003eConnect the 3-pin male XLR output to a compatible XLR cable and microphone input on a camera, field recorder, mixer, or audio interface. Fit a compatible broadcast flag onto the extended handle if required; the flag is sold separately. The package includes a mic clip, thread adapter, black external windscreen, and carrying pouch for setup and transport.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669467193414,"sku":"V7 ENG","price":149.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61KZx5w5GVL.jpg?v=1784505638"},{"product_id":"se-electronics-x1-s-vocal-pack-condenser-microphone-bundle","title":"sE Electronics X1 S VOCAL PACK Condenser Microphone Bundle","description":"\u003cp\u003eThe sE Electronics X1 S Vocal Pack is a large-diaphragm condenser microphone bundle built for recording vocals, spoken word, instruments, and podcast content. It combines the X1 S cardioid condenser microphone with a shockmount, metal pop filter, and 3-meter XLR cable. This package gives home-studio users a practical starting point for capturing a clear signal with the essential vocal-recording accessories included.\u003c\/p\u003e\u003cp\u003eThe X1 S uses a hand-crafted, individually tuned 1-inch true condenser capsule and a cardioid pickup pattern. Its cardioid response focuses on the source in front of the microphone while reducing pickup from the rear. The microphone is suited to close vocal work as well as acoustic instruments, guitar cabinets, drums, piano, and broadcast-style speech.\u003c\/p\u003e\u003cp\u003eIts sound platform is designed around a broad 20 Hz to 20 kHz frequency range, 30 mV\/Pa sensitivity, and a low 9 dB(A) equivalent noise level. These specifications support detailed recording with a low self-noise contribution in suitable recording environments. The X1 S also offers an 85 dB signal-to-noise ratio and up to 151 dB of dynamic range with its attenuation pad engaged.\u003c\/p\u003e\u003cp\u003eFor louder sources, selectable -10 dB and -20 dB attenuation pads raise the microphone's maximum SPL handling from 140 dB to 150 dB or 160 dB, respectively. Switchable 80 Hz and 160 Hz low-cut filters help reduce rumble, footfall noise, and excess low-frequency buildup from close-miking. These onboard controls let the user tailor the microphone before the signal reaches the interface or mixer.\u003c\/p\u003e\u003cp\u003eThe Vocal Pack fits naturally into an XLR-based recording setup with a 48V phantom-powered audio interface, mixer, or microphone preamp. Its included quick-lock shockmount helps isolate the microphone from stand-borne vibration, while the metal pop filter addresses vocal plosives. It is a useful front-end package for creators building a compact voice, music, or podcast recording chain.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch True Condenser Capsule:\u003c\/strong\u003e Hand-crafted capsule captures detailed vocals and instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Pickup Pattern:\u003c\/strong\u003e Focuses on the intended source from the front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh SPL Handling:\u003c\/strong\u003e Handles up to 160 dB SPL with pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Pads:\u003c\/strong\u003e -10 dB and -20 dB settings suit louder sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Cut Filters:\u003c\/strong\u003e 80 Hz and 160 Hz options reduce unwanted low end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Vocal Accessories:\u003c\/strong\u003e Includes shockmount, metal pop filter, and XLR cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X1 S has an all-metal chassis with a gold-plated 3-pin XLR connector. Its side-address body measures 58 mm in diameter and 169 mm long, with a listed microphone weight of 445 g. The included Isolation Pack combines a quick-lock shockmount with a metal pop filter that mounts directly into the shockmount for a compact layout.\u003c\/p\u003e\u003cp\u003eConnect the included 3-meter XLR cable from the microphone to a balanced XLR input on an audio interface, mixer, or microphone preamp that provides 48V phantom power. Mount the microphone upright in the shockmount, position the pop filter between the performer and capsule, and use the low-cut filter or pad when recording close vocals or high-output sources. For direct computer recording, an audio interface with XLR input and phantom power is required.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669494030406,"sku":"X1 S VOCAL PACK","price":203.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61t17TIizwL.jpg?v=1784508508"},{"product_id":"se-electronics-x1a-25aerb-red-condenser-microphone","title":"sE Electronics X1A-25AERB Red Condenser Microphone","description":"\u003cp\u003eThe sE Electronics X1A-25AERB is a red 25th Anniversary Edition cardioid condenser microphone made for recording vocals and instruments. It is designed for home studios, project studios, content creators, and musicians who need a single XLR microphone for a variety of sources. Its side-address format and cardioid pickup pattern focus on the source in front of the microphone while reducing pickup from the rear.\u003c\/p\u003e\u003cp\u003eThe X1 A uses a 2\/3-inch back-electret condenser capsule and offers a 20 Hz to 20 kHz frequency range. Its published sensitivity of 20 mV\/Pa and 16 dB(A) equivalent noise level support detailed recording work without requiring a complicated microphone setup. The microphone is suitable for vocals, acoustic instruments, amplified guitar, drums, percussion, brass, and other close-miked sources.\u003c\/p\u003e\u003cp\u003eA switchable -20 dB attenuation pad expands the microphone's ability to work with loud sound sources. Maximum SPL handling is rated at 130 dB SPL without the pad and 150 dB SPL with the pad engaged, both measured at 1 kHz with 0.5% THD. This makes the X1 A practical for recording louder sources while helping prevent overload at the microphone output.\u003c\/p\u003e\u003cp\u003eThe switchable 100 Hz low-cut filter helps reduce low-frequency rumble, footfall noise, and excess bass caused by close microphone placement. Its 6 dB-per-octave slope provides a simple way to clean up a recording before it reaches an interface or mixer. The integrated windscreen also helps control plosive energy and provides added capsule protection.\u003c\/p\u003e\u003cp\u003eThis microphone connects through a standard 3-pin male XLR output and requires 48V phantom power supplied by a compatible audio interface, mixer, or external phantom-power source. It fits naturally into an XLR-based recording setup rather than connecting directly by USB. A swivel mic clip and microphone-stand thread adapter are included for stand mounting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Condenser Capsule:\u003c\/strong\u003e Focuses pickup toward the front of the microphone for targeted recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 Hz–20 kHz Response:\u003c\/strong\u003e Covers the full published frequency range for vocals and instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-20 dB Pad:\u003c\/strong\u003e Adds headroom for close-miking loud instruments and amplified sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 Hz Low-Cut Filter:\u003c\/strong\u003e Helps reduce rumble, vibrations, and excessive low end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Windscreen:\u003c\/strong\u003e Helps manage plosives while protecting the microphone capsule.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Output:\u003c\/strong\u003e Provides a durable balanced connection to compatible recording equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X1 A uses an all-metal chassis with a red finish and black grille for this 25th Anniversary Edition. Its body measures 58 mm in diameter by 169 mm long and weighs 390 g. The microphone includes an integrated windscreen, gold-plated XLR connector, and a rugged metal housing intended to help reject electrical interference.\u003c\/p\u003e\u003cp\u003eMount the microphone in the included swivel mic clip on a compatible stand, using the included thread adapter when needed. Connect it to a microphone preamp, audio interface, mixer, or phantom-power source with a balanced 3-pin XLR cable, then enable 48V phantom power. Use the low-cut filter for low-frequency cleanup and engage the -20 dB pad when recording especially loud sources.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669494063174,"sku":"X1A-25AERB","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71j8i3bXp5L.jpg?v=1784508547"},{"product_id":"se-electronics-x1a-25aewb-x1-a-2c-condenser-microphone","title":"sE Electronics X1A-25AEWB X1 A 2C Condenser Microphone","description":"\u003cp\u003eThe sE Electronics X1 A 2C White 25th Anniversary is a side-address condenser microphone designed for recording vocals and instruments. Its cardioid pickup pattern focuses on sound in front of the microphone while helping reduce pickup from the rear. The white-and-black anniversary finish offers a distinct visual option for home and project-studio recording setups.\u003c\/p\u003e\u003cp\u003eThis microphone is suited to musicians, content creators, engineers, and streamers who need an XLR condenser mic with straightforward controls. It can be used for vocals, acoustic guitar, guitar cabinets, drums, piano, brass, strings, and room recording. A 48V phantom-powered audio interface, mixer, or microphone preamp is required for operation.\u003c\/p\u003e\u003cp\u003eThe X1 A uses a 2\/3-inch back-electret condenser capsule with a 20 Hz to 20 kHz frequency range and 20 mV\/Pa sensitivity. Its cardioid pattern and balanced sensitivity support close-miked voices as well as detailed instrument capture. With 16 dB equivalent noise and a 78 dB signal-to-noise ratio, it is designed for clean studio recording.\u003c\/p\u003e\u003cp\u003eA switchable -20 dB pad expands the microphone's capability with louder sources. Maximum SPL handling is rated at 130 dB without the pad and 150 dB with the pad engaged, measured at 0.5% THD at 1 kHz. The switchable 100 Hz low-cut filter helps reduce low-frequency rumble, footfall noise, and excess proximity effect during close-miked use.\u003c\/p\u003e\u003cp\u003eThe X1 A 2C has an all-metal housing, integrated windscreen, and gold-plated 3-pin XLR output. It includes a swivel mic clip and a mic stand thread adapter for basic stand mounting. Add an XLR cable, phantom-powered interface or mixer, and appropriate recording software to build a practical vocal or instrument recording chain.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCardioid Pickup Pattern:\u003c\/strong\u003e Focuses on the source in front of the microphone and helps reduce rear pickup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2\/3-Inch Back-Electret Capsule:\u003c\/strong\u003e Provides condenser-microphone detail for voices and a broad range of instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-20 dB Pad:\u003c\/strong\u003e Raises SPL capability for close-miking loud amplifiers, drums, and brass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 Hz Low-Cut Filter:\u003c\/strong\u003e Helps manage rumble, footfall noise, and excessive close-mic bass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Windscreen:\u003c\/strong\u003e Adds capsule protection and helps reduce plosive effects during vocal recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Output:\u003c\/strong\u003e Provides a durable balanced connection to compatible recording equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X1 A 2C uses a rugged all-metal chassis with a white-and-black 25th Anniversary finish. Its 58 mm diameter body measures 169 mm long and weighs 390 g. The internal windscreen, gold-plated XLR connector, and metal construction support regular studio use.\u003c\/p\u003e\u003cp\u003eMount the microphone in the included swivel clip on a compatible mic stand, using the supplied thread adapter when needed. Connect its 3-pin male XLR output to an audio interface, mixer, or preamp that provides 48V phantom power; an XLR cable is required and is not listed among the included accessories. Use the low-cut filter for low-frequency control and engage the -20 dB pad when recording particularly loud sources.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669494128710,"sku":"X1A-25AEWB","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71PpcBO3-fL.jpg?v=1784508585"},{"product_id":"se-electronics-z5600a-ii-tube-condenser-microphone","title":"sE Electronics Z5600a II Tube Condenser Microphone","description":"\u003cp\u003eThe sE Electronics Z5600a II is a large-diaphragm tube condenser microphone designed for detailed studio recording of vocals and instruments. Its multi-pattern design helps engineers adapt one microphone to close-miking, room capture, ensemble work, and other changing recording situations. It is a wired microphone system that includes its dedicated external power supply.\u003c\/p\u003e\u003cp\u003eThis microphone is well suited to vocalists, project-studio owners, producers, and engineers who need flexible pickup control from a single tube microphone. Nine selectable polar-pattern positions span omnidirectional, cardioid, and figure-8 operation, with intermediate settings for balancing direct sound and room ambience. The pattern control is located on the included floor-box power supply.\u003c\/p\u003e\u003cp\u003eThe Z5600a II uses a hand-crafted 1-inch true condenser capsule with gold-sputtered Mylar diaphragms and a 12AX7\/ECC83 tube. Its published response extends from 20 Hz to 20 kHz, with 25 mV\/Pa sensitivity and a 13 dB equivalent-noise level. The result is a microphone intended to capture a full, detailed signal while providing tube-based harmonic character.\u003c\/p\u003e\u003cp\u003eFor louder sources, the microphone includes a switchable 10 dB attenuation pad and a switchable 50 Hz low-cut filter. These controls make it practical for sources such as drum overheads, guitar cabinets, brass, piano, room microphones, and close vocal recording. The pad raises maximum SPL handling from 127 dB to 137 dB.\u003c\/p\u003e\u003cp\u003eThe Z5600a II fits into a conventional recording chain through its external power supply and a microphone-level XLR output to a mic preamp or audio interface. It does not use standard 48V phantom power from the preamp or interface. A custom shockmount and 8-pin microphone cable are included to support a complete recording setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNine Polar Patterns:\u003c\/strong\u003e Select omni, cardioid, figure-8, or intermediate positions to manage source focus and room sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch True Condenser Capsule:\u003c\/strong\u003e The hand-crafted, individually tuned capsule is built for detailed large-diaphragm capture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12AX7\/ECC83 Tube Circuit:\u003c\/strong\u003e The tube-based design adds harmonic character while retaining broad recording versatility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable 10 dB Pad:\u003c\/strong\u003e Helps accommodate loud sources and reduce the risk of overload at the microphone or preamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 Hz Low-Cut Filter:\u003c\/strong\u003e Reduces low-frequency buildup when proximity effect, vibration, or room rumble is a concern.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Power Supply Included:\u003c\/strong\u003e Provides operating power and pattern selection without requiring phantom power from the preamp.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Z5600a II combines a hand-made all-metal housing with a hand-crafted 1-inch capsule, gold-sputtered Mylar diaphragms, and a 12AX7\/ECC83 tube. Its microphone body measures 62 mm in diameter by 220 mm long and weighs 850 g. The system also includes a dedicated floor-box power supply, which houses the pattern control and provides the microphone's operating power.\u003c\/p\u003e\u003cp\u003eMount the microphone in the included custom shockmount on a stable stand, then connect the supplied 8-pin cable between the microphone and floor box. Connect the floor box to a mic preamp or audio interface through its 3-pin XLR output, and connect the supplied IEC power cable before switching on the power supply. Do not apply 48V phantom power from the connected preamp or interface, and allow approximately 15 minutes of warm-up time before recording.\u003c\/p\u003e","brand":"sE Electronics","offers":[{"title":"Default Title","offer_id":45669494259782,"sku":"Z5600a II","price":1199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81LTveHrucL.jpg?v=1784508639"}],"url":"https:\/\/audiowatt.store\/collections\/new-arrivals.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}