{"title":"Microphone Cables","description":null,"products":[{"product_id":"mogami-gold-3-5-2-xlrf-03-dual-xlrf-to-3-5mm-cable","title":"Mogami GOLD 3.5 2 XLRF 03 Dual XLRF to 3.5mm Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 03 is a 3-foot stereo Y-adapter cable that connects left and right XLR line-level outputs to a single 3.5mm stereo input. It is designed for setups where a mixer, preamp, or audio interface needs to feed a portable recorder, computer, or other device with a 1\/8-inch stereo input. The cable terminates in two XLR female connectors and one 3.5mm TRS male plug.\u003c\/p\u003e\u003cp\u003eThis cable is suited to studio, broadcast, livestream, and location-recording systems that need a compact analog stereo connection. Its dual XLR female ends connect to the source equipment's XLR male outputs, while the 3.5mm plug connects to the destination input. The Y configuration keeps the left and right channels organized in one cable run.\u003c\/p\u003e\u003cp\u003eMogami builds this adapter with multicore microphone snake cable for flexible handling in portable and installed audio systems. Gold-contact connectors are used at both ends, and the connectors are straight for conventional routing through equipment racks, desks, and recorder bags. The 3-foot overall length is useful when connected equipment is positioned nearby.\u003c\/p\u003e\u003cp\u003eThe cable provides a practical interface between professional XLR-based line-level gear and devices using a 3.5mm stereo input. Because the destination connection is a stereo 3.5mm TRS plug, it combines separate left and right channels into one miniature stereo connection. Confirm that the destination has a 3.5mm stereo input and that the source provides dual XLR line-level outputs.\u003c\/p\u003e\u003cp\u003eGOLD 3.5-2XLRF cables are directional by connector type and are not intended to be reversed. The XLR female connectors are intended for the source side, while the 3.5mm TRS male plug goes to the destination input. For the opposite connection direction—from a 3.5mm stereo output to dual XLR inputs—the corresponding dual-XLR-male version is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR Female Ends:\u003c\/strong\u003e Connects to left and right XLR male source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm Stereo TRS Plug:\u003c\/strong\u003e Feeds a single 1\/8-inch stereo input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Foot Length:\u003c\/strong\u003e Suits close-range recorder, interface, and mixer connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticore Snake Cable:\u003c\/strong\u003e Provides flexible cable handling for audio setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Uses gold-contact terminations at both cable ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Bodies:\u003c\/strong\u003e Supports standard routing and conventional equipment placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis black Y-adapter uses Mogami multicore microphone snake cable and straight connectors at both ends. The assembly separates into two XLR female connectors at the fan-out and terminates in one 3.5mm TRS male plug. Gold-contact connectors are specified for the cable.\u003c\/p\u003e\u003cp\u003eConnect the two XLR female ends to the left and right XLR male line outputs of the source device, then insert the 3.5mm TRS plug into a compatible stereo input. Keep the 18-inch fan-out accessible so the XLR connectors can reach the source outputs without strain. This cable is intended for line-level stereo routing and is not the reverse-direction adapter for feeding dual XLR inputs from a 3.5mm output.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286034502,"sku":"GOLD 3.5 2 XLRF 03","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL.jpg?v=1784263824"},{"product_id":"mogami-gold-3-5-2-xlrf-06-dual-xlrf-y-adapter-cable","title":"Mogami GOLD 3.5 2 XLRF 06 Dual XLRF Y-Adapter Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 06 is a 6-foot stereo breakout cable with one 3.5mm TRS male plug and two XLR female connectors. It is designed for routing a stereo line-level signal from left and right XLR outputs to a device equipped with a 3.5mm stereo input. This configuration can simplify connections between mixers, preamps, audio interfaces, and recorders or computers with a miniature stereo input.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio, live-sound, streaming, recording, and portable-production systems where compatible connectors are already present. Its dual XLR female ends connect to corresponding XLR male output connectors, while the 3.5mm TRS plug connects to the destination's stereo input. The left and right XLR legs provide a practical way to combine a two-channel source into one stereo mini-jack connection.\u003c\/p\u003e\u003cp\u003eMogami builds this GOLD-series Y-adapter with multicore microphone snake cable for flexible handling in professional audio environments. The cable uses gold-contact connectors and straight connector housings at both ends. Its 18-inch fan-out gives the two XLR female connectors useful separation when connecting adjacent output channels.\u003c\/p\u003e\u003cp\u003eThe 3.5mm TRS end carries an unbalanced stereo connection, so this cable should not be treated as a fully balanced end-to-end signal path. It is best used with compatible line-level equipment and appropriately configured input and output levels. For applications requiring a 3.5mm output to feed dual XLR inputs, Mogami offers the separate 3.5-2XLRM configuration with XLR male connectors.\u003c\/p\u003e\u003cp\u003eAt 6 feet overall, the GOLD 3.5 2 XLRF 06 fits compact desktop rigs, portable recording kits, and nearby rack or mixer connections. It can replace multi-adapter setups with one purpose-built stereo cable. The included Mogami limited lifetime warranty supports long-term use by the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo XLR-to-3.5mm Breakout:\u003c\/strong\u003e Connects dual XLR female ends to one 3.5mm TRS male plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot Overall Length:\u003c\/strong\u003e Provides reach for close-range studio and production connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Inch XLR Fan-Out:\u003c\/strong\u003e Separates the left and right XLR connectors for easier routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Uses gold-contact terminations for durable connection points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulticore Cable Construction:\u003c\/strong\u003e Uses Mogami multicore microphone snake cable for flexible handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Design:\u003c\/strong\u003e Keeps both the TRS plug and XLR connectors straight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 XLRF 06 uses a black, flexible multicore cable with a Y-split construction. It has a straight 3.5mm TRS male connector on one end and two straight 3-pin XLR female connectors on the other. Gold contacts and the 18-inch fan-out are part of the cable's purpose-built audio-interconnect design.\u003c\/p\u003e\u003cp\u003eConnect the XLR female connectors to compatible left and right XLR male outputs, then connect the 3.5mm TRS plug to a compatible stereo line input. Verify that the destination accepts a 3.5mm stereo input and set connected devices for suitable line-level operation. This model is directional by connector gender; use the separate 3.5-2XLRM version when a 3.5mm source must feed dual XLR female inputs.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286198342,"sku":"GOLD 3.5 2 XLRF 06","price":124.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL_6bd3d50e-bef2-4b60-a757-381f923d727d.jpg?v=1784263840"},{"product_id":"mogami-gold-3-5-2-xlrf-20-dual-xlrf-to-3-5mm-cable","title":"Mogami GOLD 3.5 2 XLRF 20 Dual-XLRF to 3.5mm Cable","description":"\u003cp\u003eThe Mogami GOLD 3.5 2 XLRF 20 is a 20-foot stereo breakout cable with one 3.5mm TRS male plug and two 3-pin XLR female connectors. It is designed to route separate left and right audio channels from XLR-equipped source outputs to a device with a 3.5mm stereo line input. This configuration is useful for connecting mixers, preamps, audio interfaces, or other dual-XLR-output equipment to compatible recorders and computer audio inputs.\u003c\/p\u003e\u003cp\u003eThe dual XLR female ends connect to XLR male outputs, while the 3.5mm TRS plug connects to the destination's stereo mini input. Although it uses XLR connectors at the source end, the stereo 3.5mm TRS termination means the complete connection is not balanced end-to-end. This is a directional adapter cable and is not intended as the reverse of a 3.5mm output-to-dual-XLR-input cable.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with W2930 two-channel multicore microphone snake cable. The cable construction uses individually shielded pairs, helping keep the left and right channels organized within one flexible outer jacket. Its two-channel design makes it well suited to stereo line-level routing where a single cable run is preferred over two separate cables.\u003c\/p\u003e\u003cp\u003eGold-contact connectors and straight connector bodies support reliable repeated connections in studio, mobile-recording, DJ, and installed audio setups. The 20-foot overall length provides extra reach for equipment racks, workstations, recording spaces, and stage-side connections. An approximately 18-inch fan-out separates the two XLR female connectors for access to adjacent or spaced output jacks.\u003c\/p\u003e\u003cp\u003eThis cable is a practical fit when the source provides left and right audio on separate XLR male outputs and the receiving device accepts a 3.5mm stereo line input. It does not convert microphone-level signals, provide gain control, or change connector gender at the XLR source end. For the opposite signal direction, a cable with dual XLR male connectors is required instead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo XLR Breakout:\u003c\/strong\u003e Routes separate left and right channels to one 3.5mm TRS input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Cable Length:\u003c\/strong\u003e Provides reach for studio and recording-system connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR Female Ends:\u003c\/strong\u003e Connect to XLR male source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2930 Snake Cable:\u003c\/strong\u003e Uses two individually shielded audio channels in one jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact Connectors:\u003c\/strong\u003e Supports dependable contact surfaces for repeated connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight Connector Design:\u003c\/strong\u003e Suits conventional equipment-panel and recorder connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD 3.5 2 XLRF 20 uses Mogami W2930 two-channel multicore cable with flexible PVC construction, XLPE insulation, drain wires, and served spiral shielding for each channel. The main cable section has a two-channel snake layout, while the XLR ends are split into a fan-out. Straight connectors at both ends keep the cable suitable for standard front-, side-, and rear-panel connections.\u003c\/p\u003e\u003cp\u003eConnect the two XLR female connectors to the corresponding left and right XLR male line outputs of the source device, then connect the 3.5mm TRS plug to a compatible stereo line input. Confirm that the receiving 3.5mm jack accepts stereo line-level audio and set levels at the source or destination as needed. Do not use this cable where dual XLR male connectors are required at the destination, and do not treat the complete connection as balanced.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599286493254,"sku":"GOLD 3.5 2 XLRF 20","price":169.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71u_HMcLbdL_2f71a582-b92e-481b-9ade-994af63be68b.jpg?v=1784263862"},{"product_id":"mogami-gold-db25-db25-05-8-channel-db25-analog-cable","title":"Mogami GOLD DB25-DB25-05 8-Channel DB25 Analog Cable","description":"\u003cp\u003eThe Mogami GOLD DB25-DB25-05 is a 5-foot, 8-channel analog interface cable built for routing multiple balanced audio channels between compatible DB25-equipped devices. It provides a compact alternative to running eight separate analog cables, helping keep equipment racks, patchbays, interfaces, and consoles organized. Its industry-standard analog DB25 pinout supports multichannel analog I\/O connections.\u003c\/p\u003e\u003cp\u003eThis cable is suited to recording studios, production rooms, broadcast installations, and other fixed audio systems using D-sub analog connections. It can connect compatible converters, consoles, patchbays, recording interfaces, and other multitrack equipment with DB25 analog I\/O. Both ends use DB25 connectors, so it is intended for systems that already provide matching analog DB25 ports.\u003c\/p\u003e\u003cp\u003eMogami builds this interface cable around its 2932 Neglex multipair cable, an eight-channel design with individually shielded wire sets. The construction is designed to help reduce electromagnetic and radio-frequency interference between channels. Individual channel identification also helps simplify organization during installation and service.\u003c\/p\u003e\u003cp\u003eEach channel uses stranded copper conductors, XLPE insulation, a drain wire, and a served bare-copper spiral shield. The flexible PVC outer jacket helps the cable route through studio furniture and behind equipment while maintaining an overall diameter of approximately 11.5 mm. Metal D-sub shells and thumbscrews provide a secure physical connection at each end.\u003c\/p\u003e\u003cp\u003eThe GOLD DB25-DB25-05 is a signal cable only and does not add inputs, outputs, amplification, or audio conversion. It is a practical connection link for systems already configured around the standard analog DB25 format. For installations requiring additional reach, Mogami offers this cable type in other lengths.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Carries eight channels of analog audio through one DB25-to-DB25 cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Analog Pinout:\u003c\/strong\u003e Supports compatible multichannel equipment using industry-standard DB25 analog wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2932 Cable:\u003c\/strong\u003e Uses an eight-channel Neglex multipair cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Shielding:\u003c\/strong\u003e Shielded wire sets help limit interference between audio channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal D-Sub Shells:\u003c\/strong\u003e Rugged connector shells protect the DB25 terminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Foot Length:\u003c\/strong\u003e Provides a short 5-foot run for nearby rack or patchbay connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses a flexible PVC outer jacket over Mogami 2932 eight-channel multipair cable. Its channel pairs use XLPE insulation, individual drain wires, and served bare-copper spiral shielding. All-metal DB25 shells, gold-plated contacts, and metal thumbscrews are used at the connector ends.\u003c\/p\u003e\u003cp\u003eConfirm that both connected devices use DB25 analog I\/O and the same industry-standard analog pinout before installation. Align each DB25 connector carefully, seat it fully, and tighten the thumbscrews by hand to secure the connection. The 5-foot length is well suited to close-proximity equipment such as interfaces, converters, consoles, and patchbays.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599287083078,"sku":"GOLD DB25-DB25-05","price":219.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51Qd_xsFPfL.jpg?v=1784263896"},{"product_id":"mogami-gold-stage-20-20-ft-xlr-microphone-cable","title":"Mogami GOLD STAGE-20 20 Ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STAGE-20 is a 20-foot balanced microphone cable with a 3-pin XLR female connector on one end and a 3-pin XLR male connector on the other. It is intended for connecting microphones, mixers, stage boxes, preamps, and other equipment with balanced XLR connections. Its stage-oriented construction addresses the handling, coiling, and repeated setup demands common in live sound, broadcast, and studio environments.\u003c\/p\u003e\u003cp\u003eBuilt around Mogami W2791 Stage\/Broadcast cable, the GOLD STAGE-20 uses two 24 AWG conductors made from 105 strands of annealed bare copper each. This high-strand-count construction is designed to retain flexibility during frequent handling. A braided shield and twisted-pair balanced configuration help support low-noise signal transfer in electrically active environments.\u003c\/p\u003e\u003cp\u003eThe cable is suited to vocal microphones, instrument microphones, DI boxes, and balanced analog audio connections that use standard 3-pin XLR ports. Its electrical design includes controlled resistance, capacitance, and inductance characteristics for balanced microphone cable applications. Gold-contact, black-body XLR connectors provide a ready-to-use connection without requiring separate termination.\u003c\/p\u003e\u003cp\u003eFor touring rigs and installed production systems, the 5.5 mm flexible PVC jacket is compact enough for practical routing while remaining intended for rugged use. The W2791 cable construction is rated for operation from -20°C to +70°C (-4°F to +158°F). Its specified 131,000-cycle flex life supports applications involving repeated coiling and deployment.\u003c\/p\u003e\u003cp\u003eThe GOLD STAGE-20 can serve as a dependable primary microphone lead or as a standard-length connection between balanced XLR audio components. It is a direct fit for systems that already use XLR microphones and balanced inputs or outputs. Mogami backs this cable with a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot XLR Cable:\u003c\/strong\u003e Provides a practical length for microphone, stage, and studio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Two-Conductor Design:\u003c\/strong\u003e Supports balanced analog microphone and line-level signal paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105-Strand Copper Conductors:\u003c\/strong\u003e Helps maintain flexibility during frequent handling and coiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraided Shield:\u003c\/strong\u003e Adds durable shielding around the internal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLR Connectors:\u003c\/strong\u003e Uses 3-pin XLR male and female terminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's stated lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STAGE-20 uses Mogami W2791 cable with 24 AWG, 105-strand annealed bare-copper conductors, XLPE insulation, a braided shield, and a flexible PVC jacket. The cable has a 5.5 mm outer diameter and black jacket finish. Its XLR terminations use black connector bodies with gold contacts.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or source with a male XLR output, then connect the male XLR end to a mixer, interface, stage box, preamp, or other device with a female XLR input. Confirm that both connected devices use standard 3-pin balanced XLR wiring. No separate adapter is specified, so an adapter may be needed when connecting to TRS, RCA, USB, or other connector formats.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296061510,"sku":"GOLD STAGE-20","price":113.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iooTLzcxL.jpg?v=1784264271"},{"product_id":"mogami-gold-stage-30-30-ft-xlr-microphone-cable","title":"Mogami GOLD STAGE-30 30 Ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STAGE-30 is a 30-foot balanced XLR microphone cable designed for dependable signal routing between microphones, mixers, interfaces, stage boxes, and other XLR-equipped audio gear. It provides a practical connection length for live stages, rehearsal rooms, broadcast setups, and studio tracking spaces. Its female-to-male 3-pin XLR configuration supports standard balanced microphone connections.\u003c\/p\u003e\u003cp\u003eThis cable is intended for users who regularly deploy, coil, and move microphone lines. Mogami builds the Gold Stage series around its W2791 broadcast microphone cable, which uses high-strand-count conductors, a binder and filler system, and a braided shield. That construction is suited to applications where flexibility and repeated handling matter.\u003c\/p\u003e\u003cp\u003eThe W2791 cable uses two 24 AWG conductors and a braided shield for balanced audio signal transmission. Its electrical specifications include low conductor resistance and controlled capacitance characteristics. These details support clean signal delivery across the cable's 30-foot length in compatible balanced audio systems.\u003c\/p\u003e\u003cp\u003eFor demanding locations, the cable remains specified for use from -20°C to +70°C (-4°F to +158°F). Its 105-strand annealed bare-copper conductors are designed to retain flexibility during repeated movement. The black flexible PVC jacket has a compact 5.5 mm outside diameter for straightforward routing on stage or in a production setup.\u003c\/p\u003e\u003cp\u003eGold-contact, black-body 3-pin XLR connectors terminate the cable with one male and one female end. It can be used as a direct microphone lead or as part of a larger XLR signal chain between a microphone and an input device. The factory-assembled cable is covered by Mogami's lifetime warranty for the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot XLR Run:\u003c\/strong\u003e Provides useful reach for stage, studio, and broadcast microphone setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced 3-Pin XLR:\u003c\/strong\u003e Connects standard XLR microphones to compatible balanced inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2791 Cable:\u003c\/strong\u003e Uses Mogami's two-conductor broadcast microphone cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105-Strand Conductors:\u003c\/strong\u003e Supports flexibility for frequent handling and cable management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraided Shield:\u003c\/strong\u003e Adds shielding and physical durability for regularly used cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Factory-assembled cable is covered for the original purchaser.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STAGE-30 uses Mogami W2791 cable with 105 strands of 0.05 mm annealed bare copper in each conductor, XLPE insulation, a braided shield, and a flexible black PVC jacket. The cable measures 5.5 mm in outside diameter and is fitted with black-body, gold-contact 3-pin XLR connectors. Its construction is specified for repeated flexing, with a manufacturer-rated flex life of 131,000 cycles under Mogami test methods.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or other device with a male XLR output, then connect the male XLR end to a mixer, audio interface, stage box, preamp, or other compatible female XLR input. Route the cable away from pinch points, sharp edges, and high-traffic areas where practical, and use cable ties or floor-safe cable covers when needed. This is a portable stage and production cable, not a cable specified for in-wall installation.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296225350,"sku":"GOLD STAGE-30","price":144.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iooTLzcxL_a7511dc8-4fe2-47fd-948a-142489d40912.jpg?v=1784264291"},{"product_id":"mogami-gold-stage-50-50-ft-xlr-microphone-cable","title":"Mogami GOLD STAGE-50 50 Ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STAGE-50 is a 50-foot balanced XLR microphone cable made for dependable signal routing between microphones, mixers, preamps, stage boxes, and other professional audio equipment. It provides a long-reach connection for live sound, broadcast, remote production, and studio applications. The cable terminates in standard 3-pin XLR male and female connectors for common balanced microphone and line-level connections.\u003c\/p\u003e\u003cp\u003eThis cable is designed for users who regularly coil, deploy, and handle cables in demanding environments. Its Mogami 2791 cable construction uses high-strand-count conductors intended to remain flexible while supporting repeated handling. The compact cable profile also helps it route cleanly through stage, rack, and recording setups.\u003c\/p\u003e\u003cp\u003eThe GOLD STAGE-50 uses two 24 AWG conductors in a balanced configuration with a braided shield. This construction is designed to support clean signal transfer while helping reduce interference in environments with lighting, power, wireless, and other electronic equipment. Gold-contact XLR connectors provide the familiar microphone-cable interface used across professional audio systems.\u003c\/p\u003e\u003cp\u003eInside, the cable uses 105 strands of 0.05 mm annealed bare copper per conductor and XLPE conductor insulation. The high strand count contributes to the cable's flexibility and long flex-life rating. Mogami specifies the underlying 2791 cable for use down to -20°C (-4°F), helping it remain practical for cold-weather production work.\u003c\/p\u003e\u003cp\u003eThe 50-foot length suits runs from a stage microphone to a mixer, snake, or interface positioned farther away. It can also serve as a balanced connection for compatible XLR-equipped gear when the signal wiring is appropriate. For a complete setup, pair it with equipment that provides matching 3-pin XLR connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot XLR Run:\u003c\/strong\u003e Provides extended reach for stage, studio, and broadcast routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Construction:\u003c\/strong\u003e Uses two conductors for balanced microphone or line connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105-Strand Conductors:\u003c\/strong\u003e Supports flexibility for frequent setup and teardown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraided Shield:\u003c\/strong\u003e Helps reduce electromagnetic interference in active production environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLR Ends:\u003c\/strong\u003e Uses 3-pin XLR male and female connectors with gold contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Coverage:\u003c\/strong\u003e Includes Mogami's limited lifetime manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STAGE-50 is built around Mogami 2791 balanced microphone cable with 24 AWG, 105-strand annealed bare-copper conductors, XLPE insulation, a braided shield, and a flexible PVC outer jacket. Its cable diameter is 5.5 mm, and the finished cable uses black-body 3-pin XLR connectors with gold contacts. The underlying cable is rated for operation from -20°C to +70°C (-4°F to +158°F).\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or source with a male XLR output, then connect the male XLR end to a mixer, preamp, stage box, interface, or other destination with a female XLR input. Confirm that both devices use standard 3-pin XLR wiring and that a 50-foot cable run fits the planned routing path. Avoid sharply kinking the cable, and coil it loosely after use to support reliable long-term handling.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296389190,"sku":"GOLD STAGE-50","price":194.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iooTLzcxL_b61c7385-704a-4459-8603-f9cb1fdb035a.jpg?v=1784264312"},{"product_id":"mogami-gold-studio-06-6-xlr-male-to-female-cable","title":"Mogami GOLD STUDIO-06 6' XLR Male to Female Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-06 is a 6-foot analog XLR microphone and balanced audio cable with a 3-pin XLR male connector on one end and a 3-pin XLR female connector on the other. It is designed for linking microphones, audio interfaces, mixers, preamps, powered speakers, and other compatible XLR-equipped equipment. Its short length suits close-range studio, broadcast, and live-sound connections where excess cable is unnecessary.\u003c\/p\u003e\u003cp\u003eThis cable uses Mogami Neglex W2534 Studio Quad cable, a four-conductor design intended to improve rejection of electromagnetic and radio-frequency interference. The quad construction is useful where audio lines pass near power supplies, lighting equipment, wireless devices, or other potential noise sources. It carries balanced analog audio and is also suited to certain unbalanced-equipment connections when properly wired.\u003c\/p\u003e\u003cp\u003eEach conductor uses oxygen-free copper and XLPE insulation, while a served bare-copper shield surrounds the internal conductors. This combination is designed to maintain a low-noise signal path while keeping the cable flexible enough for regular studio routing. The black flexible PVC outer jacket has a 6.0 mm outer diameter.\u003c\/p\u003e\u003cp\u003eBlack-body 3-pin XLR connectors with gold contacts complete the assembly. The connector format provides a standard male-to-female XLR link for common microphone and balanced line-level applications. Gold-plated contacts are used to help maintain dependable connector contact over repeated connections.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-06 is a practical choice for users building a compact recording setup, connecting a vocal microphone to an interface, or wiring balanced gear in a rack or desktop system. It can also serve as part of a larger Mogami Gold Studio cable system when consistent connector types and cable construction are preferred. Mogami covers factory-assembled Gold cable assemblies with its lifetime warranty for the original purchaser.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Foot XLR Cable:\u003c\/strong\u003e Provides a compact connection length for nearby audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Core:\u003c\/strong\u003e Uses four conductors for enhanced noise-cancellation performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors carry balanced analog audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Cross-linked polyethylene insulates each internal conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Bare-copper spiral shielding helps reduce external interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLR Ends:\u003c\/strong\u003e Black 3-pin XLR connectors provide male-to-female connectivity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-06 combines four 24 AWG oxygen-free copper conductors, XLPE conductor insulation, a served bare-copper shield, and a flexible PVC jacket. Its nominal cable diameter is 6.0 mm, and the assembly is finished in black with black-body, gold-contact XLR connectors. The cable uses blue and clear conductor identification within its quad configuration.\u003c\/p\u003e\u003cp\u003eConnect the XLR female end to a microphone or other device with an XLR male output, then connect the XLR male end to a compatible XLR female input on an interface, mixer, preamp, powered speaker, or other balanced audio device. Confirm that both devices use standard 3-pin XLR connections and route the cable away from AC power cords where practical. This is a single analog XLR-to-XLR cable and does not replace adapters, converters, or additional channels required by the rest of a system.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599296979014,"sku":"GOLD STUDIO-06","price":75.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71x_MqznKyL.jpg?v=1784264348"},{"product_id":"mogami-gold-studio-10-10-xlr-microphone-cable","title":"Mogami GOLD STUDIO-10 10' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-10 is a 10-foot balanced XLR microphone cable with one 3-pin XLR female connector and one 3-pin XLR male connector. It is designed to link microphones, mixers, audio interfaces, preamps, and other equipment with compatible XLR connections. Its quad-conductor construction is intended for clean signal transfer in studio, stage, broadcast, and installed audio applications.\u003c\/p\u003e\u003cp\u003eThis cable is suited to recording musicians, engineers, content creators, and live-sound users who need a practical 10-foot connection between nearby components. The length works well for a microphone stand to an interface or mixer, or for short balanced connections within a rack or control-room setup. It is a signal cable rather than a speaker cable and is not intended for amplified speaker-level connections.\u003c\/p\u003e\u003cp\u003eAt its core is Mogami W2534 Neglex Quad cable, using four oxygen-free copper conductors in a quad arrangement. This configuration supports common-mode noise rejection when used in a balanced XLR signal path. The cable also uses a served bare-copper shield to help reduce susceptibility to interference.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-10 uses black-body 3-pin XLR connectors with gold-plated contacts. Gold-plated contacts are used to provide corrosion resistance at the connection points. The flexible PVC jacket and approximately 6 mm outer diameter make the cable suitable for routine routing around studio furniture, microphone stands, and equipment racks.\u003c\/p\u003e\u003cp\u003eUse the GOLD STUDIO-10 where both devices provide standard 3-pin XLR connections and a 10-foot run is appropriate. It can connect a microphone to a mixer or audio interface, or carry balanced line-level audio between compatible XLR-equipped devices. A single cable is included, so stereo or dual-microphone setups require additional cables.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot XLR Cable:\u003c\/strong\u003e Provides a 10-foot connection for nearby audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Uses four conductors for balanced signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW2534 Cable:\u003c\/strong\u003e Built with Mogami's 24 AWG quad microphone cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare Copper Shield:\u003c\/strong\u003e Adds shielding around the internal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Helps resist corrosion at the connector contacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Ends:\u003c\/strong\u003e Includes one XLR female and one XLR male connector.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible PVC outer jacket. Its nominal outside diameter is 6.0 mm, and the finished cable is black with black-body XLR connectors. The contacts are gold-plated, while the internal conductors use blue and clear insulation colors in the quad construction.\u003c\/p\u003e\u003cp\u003eConnect the XLR female end to a microphone or device with a male XLR output, then connect the XLR male end to a compatible female XLR input on a mixer, interface, preamp, or powered audio device. Route the cable away from AC power cords and avoid sharp bends, pinching, or strain at the connector ends. Confirm that both connected devices use standard 3-pin XLR connections before installation.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599297208390,"sku":"GOLD STUDIO-10","price":87.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71x_MqznKyL_8e22bc04-d553-4bfa-992d-b7a8062829db.jpg?v=1784264369"},{"product_id":"mogami-gold-studio-100-100-ft-xlr-microphone-cable","title":"Mogami GOLD STUDIO-100 100 ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-100 is a 100-foot balanced XLR microphone cable designed for studio, broadcast, live-sound, and installed-audio signal paths. It connects an XLR-output source such as a microphone or mixer to an XLR-input device such as a preamp, interface, console, or powered speaker. Its quad-conductor construction is intended to help maintain a clean, low-noise signal over a long cable run.\u003c\/p\u003e\u003cp\u003eThis cable is a practical choice for users working around power supplies, lighting equipment, computers, and other potential sources of electromagnetic or radio-frequency interference. Mogami uses its Neglex W2534 quad microphone cable, which pairs four conductors with a served bare-copper shield. The design is especially suited to balanced analog audio connections where interference rejection and dependable handling matter.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-100 uses a male 3-pin XLR connector at one end and a female 3-pin XLR connector at the other. Both connectors have black bodies and gold-plated contacts for corrosion resistance at the contact points. The 100-foot length supports longer microphone, stage, control-room, and equipment-rack runs without requiring an added extension cable.\u003c\/p\u003e\u003cp\u003eInside, oxygen-free copper conductors use XLPE insulation, while the outer jacket is flexible PVC with a 6 mm overall diameter. The W2534 cable's balanced quad connection has a specified capacitance of 29.6 pF per foot at 1 kHz between conductors. Its compact diameter helps make the cable easier to route through studio furniture, cable pathways, and portable production setups.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-100 fits naturally into systems built around microphones, mic preamps, recording interfaces, mixers, processors, and powered speakers with standard 3-pin XLR connections. It is not a speaker cable, power cable, or digital AES\/EBU cable. Mogami covers the assembled cable with a limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Foot XLR Run:\u003c\/strong\u003e Provides reach for studio, stage, broadcast, and installed-audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors support dependable analog audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce exposure to RF and electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Contacts:\u003c\/strong\u003e Helps resist contact corrosion at the connector interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Conductor Insulation:\u003c\/strong\u003e Supports stable electrical performance and soldering durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-100 is built around Mogami W2534 cable with four 24 AWG oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible black PVC jacket. The cable measures 0.236 inch (6 mm) in outside diameter. It is factory terminated with straight, black-body, 3-pin XLR female and XLR male connectors with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or other XLR-output device, then connect the male XLR end to a compatible XLR input on a preamp, mixer, recorder, interface, processor, or powered speaker. Route the cable away from AC power wiring where practical, avoid sharp bends or pinching, and use appropriate cable management for the 100-foot length. No adapters are included; equipment with non-XLR connections requires a separately selected, correctly wired adapter or interface cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599298388038,"sku":"GOLD STUDIO-100","price":274.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VAtZTpzTL.jpg?v=1784264420"},{"product_id":"mogami-gold-studio-25-25-xlr-microphone-cable","title":"Mogami GOLD STUDIO-25 25' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-25 is a 25-foot balanced XLR microphone cable with a 3-pin XLR male connector on one end and a 3-pin XLR female connector on the other. It is designed for connecting microphones, mic preamps, mixers, interfaces, powered speakers, and other compatible balanced audio equipment. Its quad-conductor construction is intended to help maintain a low-noise signal path in studio, live-sound, broadcast, and home-recording setups.\u003c\/p\u003e\u003cp\u003eThis cable is a practical choice for users working around power supplies, lighting, computers, wireless equipment, and other potential sources of electromagnetic or radio-frequency interference. Mogami uses its W2534 Neglex Quad cable design, which combines four 24 AWG conductors with a served bare-copper shield. The result is a flexible XLR cable built for balanced audio runs where noise rejection is important.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-25 uses oxygen-free copper conductors and XLPE insulation. This construction supports stable electrical characteristics while keeping the cable at a compact 0.236-inch outer diameter. The black PVC jacket is suited to regular routing between studio equipment, microphones, patch points, and stage positions.\u003c\/p\u003e\u003cp\u003eGold-plated connector contacts are used to support corrosion resistance at the connection points, while the XLR connectors use black bodies for a professional appearance. The cable carries a 25-foot, or 7.6-meter, length that gives useful reach for vocal booths, tracking rooms, podcast spaces, rehearsal rooms, and portable live rigs. It is a signal cable only and does not replace speaker cable or an instrument cable where those connection types are required.\u003c\/p\u003e\u003cp\u003eFor an audio system upgrade, the GOLD STUDIO-25 can be used wherever a standard balanced XLR male-to-female connection is needed. It pairs naturally with XLR-output microphones and XLR-input audio interfaces, mixers, preamps, processors, and powered speakers. Mogami includes a lifetime warranty with this cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot XLR Run:\u003c\/strong\u003e Provides 25 feet of reach for microphone and balanced line-level connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Uses four conductors to support improved common-mode noise rejection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors carry balanced audio signals through the cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare Copper Served Shield:\u003c\/strong\u003e Adds shielding against electromagnetic and radio-frequency interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated XLR Contacts:\u003c\/strong\u003e Helps resist corrosion at the connector contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Cross-linked polyethylene insulation supports the cable's electrical and mechanical design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-25 is built around Mogami W2534 quad microphone cable with four 24 AWG oxygen-free copper conductors, XLPE insulation, a served bare-copper shield, and a flexible black PVC jacket. Its cable diameter is 0.236 inch, helping it fit cleanly into studio and stage cable runs. Black-body 3-pin XLR connectors with gold-plated contacts complete the assembly.\u003c\/p\u003e\u003cp\u003eConnect the XLR female end to a microphone or another device with a male XLR output, then connect the XLR male end to a mixer, interface, preamp, powered speaker, or other device with a female XLR input. Use it for balanced microphone or line-level connections; confirm that both devices use standard 3-pin XLR wiring before installation. Route the cable away from AC power cables where practical and avoid sharp bends, pinching, or strain on the connector ends.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599298551878,"sku":"GOLD STUDIO-25","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61AnSRh4MoL.jpg?v=1784264442"},{"product_id":"mogami-gold-studio-50-50-xlr-microphone-cable","title":"Mogami GOLD STUDIO-50 50' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-50 is a 50-foot balanced XLR microphone cable built for dependable signal connections in studio, broadcast, live sound, and home-recording systems. It connects equipment with a 3-pin XLR male output to equipment with a 3-pin XLR female input. Its quad-conductor construction is designed to help reduce unwanted noise on longer runs where power, lighting, wireless devices, or other electronics may be nearby.\u003c\/p\u003e\u003cp\u003eThis cable is a practical choice for microphones, audio interfaces, mixers, preamps, powered monitors, and other XLR-equipped pro-audio components. The 50-foot length provides useful reach between a recording space and control position, across a stage, or through a larger room. It is intended for balanced audio connections and can also be useful in systems where grounding or wiring conditions make noise control important.\u003c\/p\u003e\u003cp\u003eAt its core is Mogami W2534 Neglex Quad cable, using four 24 AWG oxygen-free copper conductors. The quad geometry increases common-mode noise rejection compared with conventional two-conductor balanced cable designs. Combined with the cable's bare copper served shield, it supports a low-noise signal path for microphone and line-level audio applications.\u003c\/p\u003e\u003cp\u003eXLPE conductor insulation and a flexible PVC outer jacket support a compact 0.236-inch cable diameter. The black jacket is easy to route through studio furniture, racks, stands, and cable-management paths without the bulk of a larger mic cable. Gold-plated XLR contacts are used to help resist corrosion at the connection points.\u003c\/p\u003e\u003cp\u003eThe GOLD STUDIO-50 fits naturally into a system upgrade where dependable balanced wiring is needed between existing XLR-equipped components. It does not add features or processing; it provides a properly shielded physical link between compatible audio devices. For installations requiring a 50-foot XLR male-to-female run, it offers a single-cable solution with a limited lifetime manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot XLR Run:\u003c\/strong\u003e Provides reach for studio, stage, broadcast, and home-audio routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Uses four conductors to help reduce induced noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Oxygen-free copper conductors carry balanced audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBare Copper Shield:\u003c\/strong\u003e Served shield helps guard against RF and electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Helps resist corrosion at the XLR connection points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLimited Lifetime Warranty:\u003c\/strong\u003e Backed by Mogami's limited lifetime manufacturer warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-50 combines a black flexible PVC jacket with XLPE insulation, four internal conductors, and a served bare copper shield. Its finished cable diameter is 0.236 inch, making it suitable where a smaller-diameter quad microphone cable is preferred. Black-body 3-pin XLR connectors and gold-plated contacts complete the assembly.\u003c\/p\u003e\u003cp\u003eConnect the XLR male end to a compatible female XLR output and the XLR female end to a compatible male XLR input. Route the cable away from AC power cords, power supplies, and lighting-control wiring when practical, and leave enough slack to avoid stress at either connector. No adapters, mounting hardware, or additional accessories are included with the cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599298977862,"sku":"GOLD STUDIO-50","price":186.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71x_MqznKyL_613df248-4835-456c-95e2-df528ddd3dcb.jpg?v=1784264463"},{"product_id":"mogami-gold-studio-75-75-ft-xlr-microphone-cable","title":"Mogami GOLD STUDIO-75 75 ft XLR Microphone Cable","description":"\u003cp\u003eThe Mogami GOLD STUDIO-75 is a 75-foot balanced XLR microphone cable designed for connecting microphones, mixers, preamps, interfaces, processors, and other professional audio equipment with standard 3-pin XLR connections. Its long reach suits studio rooms, stage setups, broadcast work, and installed audio paths where equipment cannot be positioned close together. The cable uses a male XLR connector on one end and a female XLR connector on the other.\u003c\/p\u003e\u003cp\u003eThis cable is intended for users who need dependable signal transfer in environments where electromagnetic or radio-frequency interference can be a concern. Its four-conductor Neglex Quad construction helps reject induced noise that may be picked up around lighting, power equipment, computers, or other electronic devices. It is appropriate for balanced microphone and line-level audio connections.\u003c\/p\u003e\u003cp\u003eMogami builds the GOLD STUDIO-75 around its W2534 Neglex Quad microphone cable, using 24 AWG oxygen-free copper conductors and a served bare-copper shield. The balanced quad layout is engineered to help cancel electromagnetic induction while maintaining a low-noise signal path. This makes it a practical choice for recording, live sound, and equipment interconnect applications.\u003c\/p\u003e\u003cp\u003eThe cable has a black flexible PVC jacket with a 0.236-inch outside diameter, providing a compact profile for a quad-conductor microphone cable. XLPE conductor insulation supports stable electrical characteristics and helps prevent shrink-back during soldering. Black-body XLR connectors with gold-plated contacts complete the assembly.\u003c\/p\u003e\u003cp\u003eUse the GOLD STUDIO-75 where a single long XLR run is needed between compatible audio components. It can serve as a microphone lead, a balanced connection between rack equipment, or a studio line cable where noise rejection is important. The cable is supplied as a finished 75-foot assembly and is covered by Mogami's limited lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Foot XLR Run:\u003c\/strong\u003e Provides extended reach for studio, stage, and installed audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad Construction:\u003c\/strong\u003e Four-conductor W2534 cable helps reduce induced electromagnetic noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Uses oxygen-free copper conductors for balanced audio signal transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Adds shielding against RF and electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Helps resist contact corrosion at the XLR terminations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Provides stable electrical properties and soldering heat resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD STUDIO-75 uses a flexible black PVC outer jacket over Mogami W2534 quad microphone cable. Its internal construction includes four 24 AWG OFC conductors, XLPE insulation, and a served bare-copper shield. The finished cable is terminated with black-body, 3-pin XLR male and female connectors with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or device with a male XLR output, and connect the male XLR end to a mixer, interface, preamp, powered speaker, or other device with a female XLR input. Confirm that both devices use standard 3-pin XLR connections before installation. Route the cable away from power wiring where possible and use appropriate cable management or floor protection for long runs.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599299141702,"sku":"GOLD STUDIO-75","price":208.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VAtZTpzTL_5826bcb1-b59c-4909-a4a1-3337af72c3d5.jpg?v=1784264483"},{"product_id":"mogami-gold-trs-xlrf-15-15-trs-to-xlr-female-cable","title":"Mogami GOLD TRS-XLRF-15 15' TRS-to-XLR Female Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRF-15 is a 15-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR female connector on the other. It is designed for balanced analog connections between compatible studio, stage, and powered audio equipment. Its connector combination helps bridge equipment that uses 1\/4-inch balanced line connections and XLR connections.\u003c\/p\u003e\u003cp\u003eThis cable is intended for musicians, engineers, content creators, and system installers who need a longer balanced interconnect with specific TRS-to-XLRF termination. The 15-foot length provides useful reach for equipment racks, mixers, interfaces, patching setups, and other installations where short cables are not sufficient. Confirm the connector gender and signal requirements of both devices before purchase.\u003c\/p\u003e\u003cp\u003eMogami wires this assembly with Neglex W2534 quad microphone cable, a four-conductor design used for balanced audio applications. The quad construction and served copper shield are engineered to reduce susceptibility to electromagnetic and radio-frequency interference. This makes the cable suitable for runs near power supplies, lighting equipment, and other potential noise sources.\u003c\/p\u003e\u003cp\u003eThe cable uses oxygen-free copper conductors, cross-linked polyethylene insulation, and a flexible PVC outer jacket. Gold-plated connector contacts and black connector bodies complete the assembly. The result is a durable, shielded cable intended for repeated professional audio use.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-XLRF-15 where a balanced 1\/4-inch TRS output or connection needs to mate with a male XLR connector. It can serve as part of a studio patching system, recording setup, or compatible powered-speaker accessory connection. It is a signal cable only and does not provide power, amplification, or audio conversion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-XLRF Termination:\u003c\/strong\u003e Connects a 1\/4-inch TRS female jack to a male XLR connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Foot Length:\u003c\/strong\u003e Provides added reach for equipment and patching layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps reduce interference entering the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRF-15 uses Mogami W2534 Neglex Quad cable with oxygen-free copper conductors, cross-linked polyethylene insulation, a served bare-copper shield, and a flexible PVC jacket. The cable has a nominal 6.0 mm outer diameter and black exterior. Its black-body connectors use gold-plated contacts.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the XLR female end to a compatible 3-pin XLR male connector. This is a single-channel analog interconnect, not a speaker-power cable or a digital adapter. Route it away from AC power wiring where practical, and verify that both connected devices are designed for the intended balanced line-level connection.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300583494,"sku":"GOLD TRS-XLRF-15","price":94.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61B0dsn61xL.jpg?v=1784264554"},{"product_id":"mogami-gold-trs-xlrf-20-20-ft-trs-to-xlrf-cable","title":"Mogami GOLD TRS-XLRF-20 20-Ft TRS to XLRF Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRF-20 is a 20-foot balanced audio cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR female connector on the other. It is designed to bridge compatible balanced connections in studio, live-sound, recording-interface, and powered-speaker setups. The extended length helps place equipment farther apart while maintaining a single continuous balanced connection.\u003c\/p\u003e\u003cp\u003eThis cable is suited to users connecting gear with a balanced 1\/4-inch TRS output or input to equipment using a female XLR connection. Its connector arrangement is useful for compatible line-level audio paths, including certain mixers, processors, interfaces, monitors, and powered speakers. Verify both devices' connector gender, signal direction, and signal level before purchase.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex W2534 Studio Quad cable, a four-conductor design intended for balanced analog audio. The quad conductor geometry and spiral bare-copper shield are designed to help reduce susceptibility to electromagnetic and radio-frequency interference. This makes it a practical choice for installations where cable runs pass near power supplies, lighting, or other electronic equipment.\u003c\/p\u003e\u003cp\u003eThe cable uses XLPE conductor insulation and flexible PVC jacketing around the internal cable structure. Gold-plated connector contacts support dependable contact surfaces, while the black-bodied 1\/4-inch TRS and XLR connectors provide clear, professional-style terminations. The finished cable is shielded and uses 24 AWG conductors.\u003c\/p\u003e\u003cp\u003eAs part of a system upgrade, the GOLD TRS-XLRF-20 can replace a shorter cable or add reach between compatible balanced components. It is a single-channel cable, not a speaker cable, stereo breakout cable, or TRS-to-dual-XLR adapter. Mogami includes a lifetime warranty with this Gold-series cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides added reach for studio, stage, and equipment-rack connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRF Wiring:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and female XLR audio interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses a four-conductor cable construction for balanced audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Provides stranded oxygen-free copper conductors in the cable assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps protect the audio path from external electrical interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides gold-plated connector contact surfaces at both cable ends.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRF-20 uses black connector bodies, gold-plated contacts, flexible PVC jacketing, XLPE conductor insulation, and a served bare-copper shield. Its W2534-based quad construction contains four 24 AWG oxygen-free copper conductors and has a nominal 6.0 mm outer cable diameter. The cable is black and supplied as a finished, shielded audio interconnect.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the 3-pin female XLR end to a matching male XLR connector. Route the cable away from AC power cables and avoid tight bends, pinching, or strain on the connectors. Confirm that your equipment supports the required balanced wiring and appropriate signal level; this cable does not convert line level to microphone level or change connector gender beyond its fixed TRS-male-to-XLR-female format.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300747334,"sku":"GOLD TRS-XLRF-20","price":104.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61B0dsn61xL_58bea519-36dd-435d-af86-f3dca186ec4f.jpg?v=1784264572"},{"product_id":"mogami-gold-trs-xlrm-03-3-trs-to-xlr-male-cable","title":"Mogami GOLD TRS-XLRM-03 3' TRS To XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-03 is a 3-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It provides a direct physical connection between equipment using these two connector formats. Its short length is useful where nearby components need a tidy, purpose-built interconnect.\u003c\/p\u003e\u003cp\u003eThis cable is intended for balanced audio signal routing in studio, live-sound, broadcast, and powered-speaker setups. It is suited to users connecting compatible TRS and female XLR ports without relying on separate adapters. Confirm both the connector gender and the signal requirements of the equipment before installation.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-XLRM-03 uses Mogami Neglex Studio Quad 2534 cable, a four-conductor design made for balanced audio applications. Its quad construction and served bare-copper shield are designed to help reduce susceptibility to electromagnetic and radio-frequency interference. This makes it a practical choice for signal paths installed near power supplies, lighting equipment, or other electronics.\u003c\/p\u003e\u003cp\u003eEach end uses a black-body connector with gold-plated contacts. The cable uses 24 AWG oxygen-free copper conductors with XLPE insulation and a flexible PVC jacket. These materials support a compact, shielded cable assembly for routine professional audio use.\u003c\/p\u003e\u003cp\u003eUse the GOLD TRS-XLRM-03 where a 3-foot run is sufficient between compatible balanced TRS and XLR equipment. It can serve as part of an interface, mixer, processor, monitor, or patching setup where a male XLR termination is required. The included cable is backed by a limited lifetime manufacturer warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRM Connection:\u003c\/strong\u003e Links a 1\/4-inch TRS male plug to a 3-pin XLR male plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot Length:\u003c\/strong\u003e Supports short, organized equipment-to-equipment audio runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex 2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for balanced audio signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Uses oxygen-free copper conductors in the cable construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Adds shielding against electromagnetic and radio-frequency interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Provides corrosion-resistant connector contact surfaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable combines a flexible black PVC jacket, XLPE conductor insulation, oxygen-free copper conductors, and a served bare-copper shield. Its black-body 1\/4-inch TRS and 3-pin XLR male connectors use gold-plated contacts. The cable assembly is shielded and uses Mogami Neglex Studio Quad 2534 construction.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible TRS jack and the XLR male end to a compatible female XLR jack. The cable is 3 feet long, so it is best used between nearby components rather than across a room or vehicle. Check connector gender, port type, and the equipment's signal-level requirements before connecting devices.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599300911174,"sku":"GOLD TRS-XLRM-03","price":71.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL.jpg?v=1784264589"},{"product_id":"mogami-gold-trs-xlrm-10-10-trs-to-xlr-male-cable","title":"Mogami GOLD TRS-XLRM-10 10' TRS to XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-10 is a 10-foot balanced audio patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It is intended for balanced analog signal routing where equipment uses different connector formats. The cable provides a direct connection without relying on separate adapters.\u003c\/p\u003e\u003cp\u003eThis cable is suited to studio, live-sound, broadcast, and powered-speaker setups with compatible balanced TRS and XLR connections. It can be used to link gear such as mixers, audio interfaces, patch bays, signal processors, and monitor systems. Both ends are male, so the connected equipment must provide matching female inputs or outputs.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex Quad 2534 cable, a four-conductor design used for balanced audio applications. Its quad construction and served copper shield are designed to help reduce the pickup of electromagnetic interference around audio equipment. This makes it a practical choice for organized signal routing in electrically busy setups.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used at the TRS and XLR terminations, while the connectors use black bodies. The cable has a flexible PVC outer jacket and a nominal 6.0 mm outside diameter. Its 24 AWG oxygen-free-copper conductors balance compact handling with professional audio-cable construction.\u003c\/p\u003e\u003cp\u003eThe 10-foot length is useful when components are separated by a rack, desk, speaker stand, or console position. It is a single-channel cable rather than a stereo pair or multi-channel snake. Use it where the destination and source are designed for compatible balanced TRS-to-XLR signal wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced TRS-to-XLRM Wiring:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and XLR female ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides added reach for studio and system routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex Quad 2534 Cable:\u003c\/strong\u003e Uses four conductors for balanced analog audio cabling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 AWG OFC Conductors:\u003c\/strong\u003e Provides stranded oxygen-free-copper signal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Copper Shield:\u003c\/strong\u003e Helps limit interference pickup in demanding installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold-plated connector contacts complete both cable ends.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRM-10 uses Mogami Neglex Quad 2534 cable with XLPE conductor insulation, a served shield, and a flexible PVC jacket. The finished cable is black and has black-body connectors with gold-plated contacts. Its nominal cable outside diameter is 6.0 mm.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male plug to a compatible female balanced TRS jack and the XLR male end to a compatible female XLR connector. Confirm that the source, destination, signal level, and balanced wiring are appropriate for the equipment before installation. Route the cable away from power wiring where practical and avoid sharply bending or crushing the cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301009478,"sku":"GOLD TRS-XLRM-10","price":95.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL_7ab87d2c-7389-405a-a9e3-aa47cb55779f.jpg?v=1784264603"},{"product_id":"mogami-gold-trs-xlrm-20-20-trs-to-xlrm-patch-cable","title":"Mogami GOLD TRS-XLRM-20 20' TRS-to-XLRM Patch Cable","description":"\u003cp\u003eThe Mogami GOLD TRS-XLRM-20 is a 20-foot balanced patch cable with a 1\/4-inch TRS male connector on one end and a 3-pin XLR male connector on the other. It is designed to link compatible balanced audio equipment that uses these two connector formats. The extended length is useful when equipment needs to be positioned farther apart without adding couplers or extensions.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio, recording, live-sound, and powered-speaker setups using balanced line connections. It can help simplify connections between compatible mixers, interfaces, processors, monitor controllers, powered speakers, and other professional audio equipment. Connector type, signal level, and pinout should be verified on both devices before use.\u003c\/p\u003e\u003cp\u003eMogami builds this assembly with Neglex W2534 Quad high-definition microphone cable. Its four-conductor quad construction and served copper shield are designed to support balanced signal transmission in environments where electromagnetic or radio-frequency interference may be present. The cable uses oxygen-free copper conductors and a flexible PVC outer jacket.\u003c\/p\u003e\u003cp\u003eGold-plated contacts are used at both the 1\/4-inch TRS and XLR male terminations. The black-body, straight connectors provide a conventional, practical format for patching compatible gear. XLPE conductor insulation is used within the W2534 cable construction.\u003c\/p\u003e\u003cp\u003eThe GOLD TRS-XLRM-20 fits into systems that need a direct balanced TRS-to-XLR male cable rather than an adapter plus a separate cable. Its 20-foot reach supports organized routing between racks, workstations, stage equipment, and powered speakers. Mogami includes a lifetime warranty with this Gold-series cable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-XLRM Terminations:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and 3-pin XLR male interfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Foot Length:\u003c\/strong\u003e Provides extended reach for equipment placement and cable routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Quad Construction:\u003c\/strong\u003e Uses four conductors for balanced audio signal wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Cable:\u003c\/strong\u003e Uses Mogami's quad high-definition microphone cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Plated Contacts:\u003c\/strong\u003e Gold contact plating is used at both connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Served bare-copper shielding supports noise-resistant cable construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD TRS-XLRM-20 uses flexible PVC jacketing around W2534 Neglex Quad cable, with XLPE conductor insulation and a served bare-copper shield. Its four 24 AWG oxygen-free copper conductors are arranged in a quad configuration. Both ends use straight, black-body connectors with gold-plated contacts.\u003c\/p\u003e\u003cp\u003eUse this cable only where a balanced 1\/4-inch TRS male connection and a 3-pin XLR male connection are appropriate for the connected equipment. Route the cable away from AC power cords, power supplies, and areas where it may be pinched or repeatedly stressed. Do not use it as a speaker cable for passive speakers, and confirm the required connector gender and signal level before purchase.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301238854,"sku":"GOLD TRS-XLRM-20","price":125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pRYVU7EpL_f9b4d62c-1a5c-4020-b43f-ae8a9d3a70a6.jpg?v=1784264623"},{"product_id":"mogami-gold-db25-xlrf-05-8-channel-db25-to-xlrf-cable","title":"Mogami GOLD-DB25-XLRF-05 8-Channel DB25 to XLRF Cable","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRF-05 is a 5-foot analog breakout snake that routes eight channels between a DB25-equipped recording interface or patchbay and eight female XLR connections. It consolidates multiple balanced analog paths into one organized cable run. This makes it useful where equipment uses the common analog DB25 interface format.\u003c\/p\u003e\u003cp\u003eThis cable is intended for studio systems, recording interfaces, consoles, outboard gear, and patchbay installations that need eight analog channels at once. Its DB25 male connector uses locking thumb screws, while the fanout terminates in eight 3-pin female XLR connectors. Confirm both the connector gender and the analog DB25 pinout of the connected equipment before ordering.\u003c\/p\u003e\u003cp\u003eBuilt with Mogami W2932 eight-channel multicore cable, this assembly uses individually shielded pairs to support orderly multichannel analog signal routing. The cable construction includes XLPE insulation, a spiral shield, and drain wire for each channel. These features are designed for controlled studio wiring where cable organization and signal isolation matter.\u003c\/p\u003e\u003cp\u003eGold-contact XLR female connectors and a metal DB25 shell provide durable connection points for repeated studio use. The DB25 connector includes extended metal thumb screws for hand-tightened installation. A Techflex-protected fanout helps protect the individual XLR tails where the main cable separates into separate channels.\u003c\/p\u003e\u003cp\u003eThe 5-foot length is suited to short runs between adjacent rack equipment, patchbays, and console I\/O. It can carry eight analog channels in either direction, depending on the connected equipment and signal flow. It is a cable assembly only and does not add inputs, outputs, amplification, or audio conversion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Routes eight balanced analog signal paths through one DB25-to-XLR fanout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDB25-to-XLR Female Format:\u003c\/strong\u003e Provides one locking DB25 male connector and eight 3-pin female XLR connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Foot Length:\u003c\/strong\u003e Fits short equipment-to-patchbay or rack-to-rack cable runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami W2932 Cable:\u003c\/strong\u003e Uses an eight-channel multicore cable with individually shielded pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLRs:\u003c\/strong\u003e Uses gold-contact female XLR connectors for the fanout ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal DB25 Hardware:\u003c\/strong\u003e Includes a rugged metal D-sub shell and hand-grip thumb screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses Mogami W2932 multicore snake cable with 26 AWG conductors, XLPE insulation, flexible PVC jacketing, drain wires, and served spiral shielding. Its main cable section has an approximately 11.5 mm outer diameter, while the individual fanout channels are protected with a braided Techflex sleeve. The black finish and numbered channel identification support tidy studio cable management.\u003c\/p\u003e\u003cp\u003eConnect the locking DB25 male end to equipment with a compatible analog DB25 port, then connect the eight female XLR ends to corresponding male XLR connections. Tighten the DB25 thumb screws by hand and avoid placing strain on the fanout transition. This cable is wired to the industry-standard analog DB25 pinout, but the connected equipment should be checked for pinout compatibility before installation.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301435462,"sku":"GOLD-DB25-XLRF-05","price":339.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61W42Og1mkL.jpg?v=1784264641"},{"product_id":"mogami-gold-db25-xlrf-10-8-channel-db25-to-xlr-female-cable","title":"Mogami GOLD-DB25-XLRF-10 8-Channel DB25 to XLR Female Cable","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRF-10 is a 10-foot, 8-channel analog breakout cable for studio recording interfaces, consoles, and patchbays with a DB25 analog connection. It terminates in one lockable male DB25 connector and eight 3-pin female XLR connectors. This model is intended to organize multiple balanced analog audio paths in one cable assembly.\u003c\/p\u003e\u003cp\u003eIt is a practical choice for connecting a DB25-equipped interface or patchbay to equipment fitted with male XLR outputs. The eight-channel fan-out avoids using eight separate cables and keeps related channels grouped together. Its industry-standard analog DB25 wiring is intended for compatible multichannel analog equipment.\u003c\/p\u003e\u003cp\u003eThe cable uses individually twisted, shielded pairs to carry each channel separately. Each pair includes a drain wire and spiral bare-copper shield, helping support orderly analog signal routing in studio and live-recording setups. Numbered and color-coded conductors make individual channels easier to identify during installation or service.\u003c\/p\u003e\u003cp\u003eMogami's W2932 multicore construction uses XLPE insulation and a flexible PVC outer jacket. The compact 8-channel cable measures approximately 0.453 inches in overall diameter, supporting routing behind racks, through furniture openings, or between nearby equipment. Metal DB25 hardware with thumb screws provides a secured connection at the interface end.\u003c\/p\u003e\u003cp\u003eUse the GOLD-DB25-XLRF-10 where a DB25 analog output or input needs to break out to eight female XLR connections over a 10-foot run. It fits well in systems built around multichannel converters, recording interfaces, analog consoles, and patchbays. Confirm both the connector genders and the DB25 analog pinout of the connected equipment before ordering.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Routes eight analog audio channels through one DB25 breakout cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDB25 to XLR Female:\u003c\/strong\u003e Connects one male DB25 plug to eight female XLR connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides a 10-foot, or 3-meter, equipment-to-equipment cable run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Pairs:\u003c\/strong\u003e Separates channels with twisted pairs, drain wires, and spiral shields.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXLPE Insulation:\u003c\/strong\u003e Uses cross-linked polyethylene insulation for dimensional stability during termination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal DB25 Shell:\u003c\/strong\u003e Includes a metal D-sub shell and easy-grip thumb screws.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe assembly uses Mogami W2932 8-channel multicore cable with a flexible PVC jacket, individually shielded pairs, XLPE insulation, and printed channel identification. The DB25 end uses a rugged metal shell with threaded thumb screws, while the breakout end provides eight 3-pin female XLR connectors. The cable is specified for operation from -20°C to +70°C (-4°F to +158°F).\u003c\/p\u003e\u003cp\u003eConnect the DB25 plug to a compatible analog DB25 port and secure it with its thumb screws; connect each labeled female XLR to the corresponding male XLR output. Route the fan-out legs so channel labels remain visible and avoid sharply bending or pinching the cable. This cable does not convert digital audio, change connector gender, or add audio channels beyond those supplied by the connected DB25-equipped device.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301599302,"sku":"GOLD-DB25-XLRF-10","price":359.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61W42Og1mkL_95a30abc-9fcd-46b0-b6b2-628c5ceaa23f.jpg?v=1784264659"},{"product_id":"mogami-gold-db25-xlrm-05-8-channel-db25-to-xlrm-snake","title":"Mogami GOLD-DB25-XLRM-05 8-Channel DB25 to XLRM Snake","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRM-05 is a 5-foot, eight-channel analog interface snake with one DB25 male connector and eight XLR male fan-out connectors. It is designed for linking equipment that uses an industry-standard analog DB25 interface to balanced XLR connections. This configuration is useful for patch bays, recording interfaces, consoles, converters, and outboard equipment.\u003c\/p\u003e\u003cp\u003eEach channel uses individually twisted and shielded conductors to help maintain separation between channels in a compact multicore cable. The cable's low-capacitance construction and copper shielding are intended for clean balanced analog signal routing. It provides an organized alternative to running eight separate XLR cables between compatible devices.\u003c\/p\u003e\u003cp\u003eThe DB25 end uses a rugged all-metal D-sub shell with precision pin termination and extended metal thumb screws. These screws provide a secure connection while allowing hand-tightened installation and removal. The XLR male fan-out connectors use gold contacts and are protected with Techflex braided sleeving.\u003c\/p\u003e\u003cp\u003eChannel identification is simplified with individually numbered jackets at the fan-out end. This makes it easier to trace corresponding channels during installation, troubleshooting, and equipment changes. The eight-channel layout is especially practical where rack-mounted interfaces and patch bays concentrate multiple balanced analog lines in a small space.\u003c\/p\u003e\u003cp\u003eThis cable is wired to the industry-standard analog DB25 pinout and is intended for compatible analog equipment. It is a passive connection cable and does not add microphone preamps, conversion, processing, or amplification. Confirm the pinout and connector gender of the equipment being connected before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Routes up to eight balanced analog channels through one DB25-to-XLRM assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry-Standard Analog Pinout:\u003c\/strong\u003e Supports analog devices using the common DB25 audio wiring format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-Contact XLRM Connectors:\u003c\/strong\u003e Provides eight male XLR fan-out terminations for compatible balanced connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Channel Shielding:\u003c\/strong\u003e Twisted, shielded pairs help reduce interference and channel-to-channel interaction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal D-Sub Shell:\u003c\/strong\u003e The DB25 connector uses a durable metal shell for physical protection and shielding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumbered Techflex Fan-Outs:\u003c\/strong\u003e Individually numbered, braided-protected channels aid routing and identification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-DB25-XLRM-05 combines OFC conductors, XLPE insulation, a PVC outer jacket, individually shielded pairs, and a bare-copper served spiral shield. Its DB25 connector has an all-metal shell, while the eight XLR male connectors use gold contacts. Techflex braided sleeves protect the individual fan-out legs.\u003c\/p\u003e\u003cp\u003eConnect the DB25 male end to a compatible analog DB25 port and secure it using the attached metal thumb screws. Route the numbered XLR male ends to matching XLR female inputs, outputs, or patch-bay points as required by the connected equipment. Verify that the destination equipment uses the industry-standard analog DB25 pinout and that male XLR connectors are appropriate for the application.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599301828678,"sku":"GOLD-DB25-XLRM-05","price":309.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71aOoRyCwLL.jpg?v=1784264676"},{"product_id":"mogami-gold-db25-xlrm-10-8-channel-db25-to-xlrm-snake","title":"Mogami GOLD-DB25-XLRM-10 8-Channel DB25 to XLRM Snake","description":"\u003cp\u003eThe Mogami GOLD-DB25-XLRM-10 is a 10-foot, eight-channel analog breakout snake designed to connect a DB25-equipped audio interface, console, converter, or patchbay to eight XLR male connections. It consolidates multiple balanced analog audio paths into one organized cable run. This makes it useful where rack equipment and studio wiring need a clean, serviceable connection method.\u003c\/p\u003e\u003cp\u003eBuilt around Mogami 2932 Neglex multicore cable, this assembly uses individually twisted and shielded channel pairs. The construction is intended to help minimize interference between channels and reduce exposure to electromagnetic and radio-frequency noise. It is suited to line-level analog routing in recording, broadcast, and production environments.\u003c\/p\u003e\u003cp\u003eThe cable uses an industry-standard analog DB25 pinout and provides eight XLR 3-pin male connectors at the fanout end. It is appropriate for equipment that uses compatible analog DB25 I\/O wiring. Confirm the pinout requirement of connected equipment before purchase, particularly when working with digital or non-standard DB25 interfaces.\u003c\/p\u003e\u003cp\u003eEach channel is individually jacketed and marked with printed, underlined numbering to make identification easier during installation and troubleshooting. The 10-foot length provides useful reach for routing between a rack, console, patchbay, or outboard equipment. Its flexible PVC jacket and compact multicore format help reduce cable clutter compared with eight separate XLR cables.\u003c\/p\u003e\u003cp\u003eA rugged all-metal D-sub shell, gold-contact terminations, and metal thumb screws support repeated connection and removal in studio systems. The underlying Mogami 2932 cable is specified for operation from -20°C to 70°C. This cable is a practical system-building component for balanced analog signal paths where a DB25 fanout to XLR male connectors is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Analog Channels:\u003c\/strong\u003e Breaks out one DB25 connection to eight XLR male connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustry-Standard Pinout:\u003c\/strong\u003e Designed for compatible analog DB25-equipped audio hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividually Shielded Pairs:\u003c\/strong\u003e Helps limit noise pickup and channel-to-channel interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMogami 2932 Construction:\u003c\/strong\u003e Uses 8-channel Neglex multicore studio snake cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumbered Channel Identification:\u003c\/strong\u003e Printed, underlined markings simplify routing and maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal D-Sub Hardware:\u003c\/strong\u003e All-metal shell and thumb screws support secure attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-DB25-XLRM-10 combines a flexible 8-channel Mogami 2932 cable with individually shielded twisted pairs, flexible PVC jacketing, and a rugged metal D-sub shell. Its XLR fanout uses gold-contact connectors, while the DB25 connector is secured with easy-grab metal thumb screws. The cable's overall bulk-cable diameter is approximately 11.5 mm, helping it remain manageable for multi-channel routing.\u003c\/p\u003e\u003cp\u003eConnect the DB25 end only to equipment using the compatible industry-standard analog DB25 pinout, then route the eight numbered XLR male ends to corresponding XLR female inputs. Use the channel numbers to maintain consistent signal assignments between the source and destination. This assembly is intended for balanced analog audio connections; it is not an AES\/EBU digital DB25 breakout cable.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599302189126,"sku":"GOLD-DB25-XLRM-10","price":325.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71k5HMbGdNL.jpg?v=1784264717"},{"product_id":"mogami-gold-trsxlrm-30-30-foot-trs-to-xlr-male-cable","title":"Mogami GOLD-TRSXLRM-30 30-Foot TRS to XLR Male Cable","description":"\u003cp\u003eThe Mogami GOLD-TRSXLRM-30 is a 30-foot balanced audio cable with a 1\/4-inch TRS male connector on one end and an XLR male connector on the other. It provides a practical way to join compatible balanced line-level equipment with different connector formats. This cable is intended for studio, live-sound, and powered-speaker signal paths.\u003c\/p\u003e\u003cp\u003eThis cable is suited to users connecting mixers, audio interfaces, keyboards, processors, powered speakers, and other equipment with compatible balanced TRS and XLR connections. Its 30-foot length provides added reach for equipment placed across a room, stage, or control area. Verify the connector gender and input or output type on both devices before ordering.\u003c\/p\u003e\u003cp\u003eThe Gold TRS-XLRM uses Mogami Neglex W2534 quad microphone cable, a four-conductor design made for balanced audio applications. The quad construction and spiral copper shield are designed to help reduce the effects of electromagnetic and radio-frequency interference. It is a signal cable for audio interconnection, not a speaker cable for carrying amplified speaker power.\u003c\/p\u003e\u003cp\u003eXLPE conductor insulation is used in the cable construction for stable electrical characteristics, while the flexible PVC outer jacket supports routine routing and handling. The cable uses a served bare-copper shield around the conductors. Gold-contact connector terminations provide the TRS-to-XLRM interface.\u003c\/p\u003e\u003cp\u003eUse the GOLD-TRSXLRM-30 where a balanced 1\/4-inch TRS connection needs to interface with a female XLR input or panel connector. It can be a useful part of a system upgrade when replacing a shorter run or standardizing a balanced signal path. Mogami backs the Gold TRS-XLRM series with a lifetime warranty.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e30-Foot Length:\u003c\/strong\u003e Provides reach for spaced studio or live-sound equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS to XLRM Ends:\u003c\/strong\u003e Connects compatible 1\/4-inch TRS and female XLR ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Wiring:\u003c\/strong\u003e Supports balanced line-level audio signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeglex W2534 Quad Cable:\u003c\/strong\u003e Uses four conductors for enhanced noise-canceling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shield:\u003c\/strong\u003e Helps protect the signal from external interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifetime Warranty:\u003c\/strong\u003e Covered by Mogami's lifetime warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GOLD-TRSXLRM-30 is built around Mogami W2534 Neglex Quad cable with 24 AWG OFC conductors, XLPE insulation, a served bare-copper shield, and a flexible PVC jacket. Its quad conductor arrangement and dense spiral shield are designed for balanced audio runs in environments where electromagnetic or radio-frequency noise can be a concern. The cable has gold-contact TRS and XLRM connector terminations.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS male end to a compatible balanced TRS jack and the XLR male end to a compatible female XLR input or connector. Route the cable away from AC power cords, power supplies, and other potential interference sources where practical. This cable is for low-level audio interconnection; do not use it between a power amplifier and a passive speaker.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599303303238,"sku":"GOLD-TRSXLRM-30","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71F_THexVRL.jpg?v=1784264835"},{"product_id":"mogami-platinum-studio-03-3-xlr-microphone-cable","title":"Mogami PLATINUM STUDIO 03 3' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami PLATINUM STUDIO 03 is a 3-foot balanced XLR microphone and line cable for short studio connections. It provides a male 3-pin XLR connector on one end and a female 3-pin XLR connector on the other. This compact length is useful for linking microphones, preamps, interfaces, converters, and nearby powered speakers without excess cable slack.\u003c\/p\u003e\u003cp\u003eBuilt for studio recording, mastering, and high-end A\/V installations, this cable supports both analog audio and AES3 digital audio connections. Its 110-ohm characteristic impedance is designed for AES3-compatible signal transmission. It can also serve as a balanced analog XLR cable where a short interconnect is needed.\u003c\/p\u003e\u003cp\u003eThe cable uses two high-purity oxygen-free copper conductors in 18 AWG size. Low capacitance and controlled impedance support extended-frequency signal transfer in suitable analog and digital systems. A full-coverage served spiral shield helps reduce susceptibility to radio-frequency interference.\u003c\/p\u003e\u003cp\u003eIts red and white insulated conductors are contained in a black PVC outer jacket with a clear LDPE monofilament filler. The finished cable has a nominal outer diameter of 7.8 mm. Polished black chrome XLR connectors provide the cable's studio-oriented termination.\u003c\/p\u003e\u003cp\u003ePLATINUM STUDIO 03 is intended for fixed or carefully managed studio use rather than frequent rough handling on a live stage. It is a practical choice for short runs between balanced XLR-equipped gear, including microphones, audio interfaces, AES3 equipment, powered speakers, and subwoofers. A limited lifetime warranty is included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Foot XLR Cable:\u003c\/strong\u003e Provides a tidy short-run connection between nearby audio components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAES3-Compatible Design:\u003c\/strong\u003e Supports AES3 digital audio as well as balanced analog signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 AWG OFC Conductors:\u003c\/strong\u003e Uses high-purity oxygen-free copper signal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110-Ohm Impedance:\u003c\/strong\u003e Matches the cable design to AES3 digital-audio applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServed Spiral Shield:\u003c\/strong\u003e Provides approximately full coverage for interference protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStudio-Focused Construction:\u003c\/strong\u003e Designed for recording, mastering, and installed audio environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PLATINUM STUDIO 03 is built around Mogami W3402 cable with two 19\/0.25A OFC conductors, CPP insulation, a clear LDPE monofilament filler, and a black PVC jacket. Its served shield uses approximately 100 strands of 0.18A conductor. The cable is finished with Mogami 3-pin XLR male and female connectors.\u003c\/p\u003e\u003cp\u003eConnect the female XLR end to a microphone or other XLR output and the male XLR end to a compatible XLR input, following the connector requirements of the equipment being used. The 3-foot length is best suited to close-proximity studio interconnects and neat equipment-rack or desktop routing. It is not intended for frequent or rough live-stage handling.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599305596998,"sku":"PLATINUM STUDIO 03","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61eUmS5W4iL.jpg?v=1784265094"},{"product_id":"mogami-platinum-studio-12-12-xlr-microphone-cable","title":"Mogami PLATINUM STUDIO 12 12' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami PLATINUM STUDIO 12 is a 12-foot XLR-to-XLR cable for studio microphone, line-level, and AES3 digital-audio connections. It provides a practical link between compatible 3-pin XLR equipment where a fixed 12-foot run suits the setup. This factory-assembled cable is intended for recording, mastering, monitoring, and installation-oriented applications.\u003c\/p\u003e\u003cp\u003eThe cable uses two 18 AWG oxygen-free copper conductors and is designed for low-capacitance signal transfer. Its 110-ohm characteristic impedance supports AES3 digital audio while retaining suitability for analog audio connections. Mogami positions the Platinum Studio series for accuracy-focused studio work rather than live-stage duty.\u003c\/p\u003e\u003cp\u003eA 100% coverage spiral shield helps protect the signal path from interference. The cable's specified capacitance is 15.3 pF per foot between the inner conductors at 1 kHz and 20°C. This construction makes it appropriate for balanced XLR signal paths in studio racks, control rooms, and powered-monitor systems.\u003c\/p\u003e\u003cp\u003eOne end terminates in a 3-pin male XLR connector and the other in a 3-pin female XLR connector. That configuration is commonly used to connect a microphone to an XLR input or to carry balanced audio between compatible devices. The 12-foot length offers room for nearby stands, interfaces, mixers, processors, or active speakers without using an unnecessarily long cable.\u003c\/p\u003e\u003cp\u003eThe PLATINUM STUDIO 12 can also be used with compatible powered speakers or subwoofers that accept balanced XLR connections. It is not a speaker-level cable for connecting a power amplifier to passive speakers. Choose it when both connected components use standard 3-pin XLR connections and the installation is primarily studio based.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Foot Length:\u003c\/strong\u003e Provides a 12-foot XLR connection for nearby studio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Pin XLR Ends:\u003c\/strong\u003e Connects a male XLR output to a female XLR input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 AWG OFC Conductors:\u003c\/strong\u003e Uses two oxygen-free copper signal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAES3 Compatibility:\u003c\/strong\u003e Supports compatible 110-ohm digital audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Shield:\u003c\/strong\u003e Uses a full-coverage served shield for interference protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Capacitance:\u003c\/strong\u003e Helps suit detailed analog signal paths and monitoring setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PLATINUM STUDIO 12 is built around Mogami W3402 cable with red and white insulated conductors, a clear LDPE monofilament filler, and a black PVC outer jacket. The cable has an overall jacket diameter of 7.8 ± 0.5 mm. Its served shield uses approximately 100 strands of 0.18 mm wire.\u003c\/p\u003e\u003cp\u003eRoute the cable between compatible 3-pin XLR devices, matching the male end to a female XLR jack and the female end to a male XLR jack. It is suited to studio microphones, recording interfaces, mixers, outboard gear, and compatible powered speakers or subwoofers. Mogami specifies this series for studio use and not for frequent rough handling or live-stage use.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599305826374,"sku":"PLATINUM STUDIO 12","price":134.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61eUmS5W4iL_c3e833d2-3ce0-43bc-bcf3-911fad06a7a8.jpg?v=1784265114"},{"product_id":"mogami-platinum-studio-25-25-xlr-microphone-cable","title":"Mogami PLATINUM STUDIO 25 25' XLR Microphone Cable","description":"\u003cp\u003eThe Mogami PLATINUM STUDIO 25 is a 25-foot balanced XLR cable for connecting microphones, line-level equipment, powered speakers, and AES3 digital audio gear. It provides a ready-made XLR male-to-XLR female connection for studio signal paths that need a longer cable run. The cable is intended for fixed or carefully handled professional studio environments rather than demanding live-stage use.\u003c\/p\u003e\u003cp\u003eThis cable is well suited to recording, mixing, mastering, broadcast, and home AV installations using standard 3-pin XLR connections. Its balanced construction supports microphone and line signals while also meeting AES3 digital-audio requirements. The 25-foot length can help bridge the distance between a mic position, audio interface, preamp, mixer, monitor, or converter.\u003c\/p\u003e\u003cp\u003eMogami builds the Platinum Studio series around two large-gauge, high-purity oxygen-free copper conductors. The 18 AWG conductors and low 50 pF\/m capacitance specification are designed for extended high-frequency transmission in analog applications. Its 110-ohm characteristic impedance also supports AES3 digital signal use.\u003c\/p\u003e\u003cp\u003eA served shield surrounds the internal conductors to help maintain a protected balanced connection in studio equipment chains. The cable uses red and white conductor insulation, a clear LDPE filler, and a black PVC outer jacket. Custom XLR connectors use silver pins for low contact resistance, with polished black-chrome connector housings.\u003c\/p\u003e\u003cp\u003eThe PLATINUM STUDIO 25 is a practical choice when upgrading a critical XLR run without changing microphones, monitors, interfaces, or other equipment. It connects directly between devices equipped with standard 3-pin XLR male and female ports. For portable and frequently moved systems, use care: this series is specified for studio use and is not intended for repeated rough handling on a live stage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot XLR Run:\u003c\/strong\u003e Connects XLR-equipped equipment across a longer studio distance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced XLR Construction:\u003c\/strong\u003e Supports balanced microphone and line-level signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 AWG OFC Conductors:\u003c\/strong\u003e Uses large-gauge, high-purity oxygen-free copper conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAES3 Compatibility:\u003c\/strong\u003e Meets AES3 requirements for compatible digital audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Capacitance:\u003c\/strong\u003e 50 pF\/m capacitance supports extended analog high-frequency transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver-Pin XLR Connectors:\u003c\/strong\u003e Provides low-resistance contacts at each cable end.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cable uses two 19\/0.25A OFC conductors with CPP insulation, a clear LDPE monofilament filler, an approximately 100\/0.18A served shield, and a black PVC jacket. Its nominal outer diameter is 7.8 mm, with a tolerance of ±0.5 mm. Polished black-chrome XLR connector housings and silver pins complete the terminated assembly.\u003c\/p\u003e\u003cp\u003eConnect the XLR male end to an XLR female output and the XLR female end to an XLR male output, such as a microphone, mic preamp, mixer, converter, powered monitor, or AES3 device. Verify that both devices use standard 3-pin XLR connections before purchasing. Route the cable where it will not be repeatedly stepped on, pulled, or subjected to live-stage handling.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599305990214,"sku":"PLATINUM STUDIO 25","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61eUmS5W4iL_d2d81715-06d1-4298-83af-51c16f9c0e53.jpg?v=1784265135"},{"product_id":"mogami-platinum-studio-50-50-foot-xlr-microphone-cable","title":"Mogami PLATINUM STUDIO 50 50-Foot XLR Microphone Cable","description":"\u003cp\u003eThe Mogami PLATINUM STUDIO 50 is a 50-foot balanced XLR cable built for microphone, line-level, and AES3 digital-audio connections in fixed studio environments. It provides the reach needed to connect microphones, interfaces, preamps, powered speakers, or outboard equipment without changing connector formats. Its XLR male-to-XLR female configuration suits standard balanced audio signal paths.\u003c\/p\u003e\u003cp\u003eThis cable is intended for recording, mastering, monitoring, and high-end home A\/V installations where a long balanced run is required. It is designed with the mastering engineer in mind and is not intended for frequent handling or live-stage use. The 50-foot length is useful for control rooms, vocal booths, equipment racks, and powered-monitor placement.\u003c\/p\u003e\u003cp\u003eMogami uses two large 18 AWG oxygen-free copper conductors in its Platinum Studio W3402 cable. The cable is specified with low capacitance, wide bandwidth, and a 110-ohm characteristic impedance. These electrical properties support analog audio use while also meeting AES3 digital-audio requirements.\u003c\/p\u003e\u003cp\u003eA 100% coverage spiral shield helps protect the balanced signal path from radio-frequency interference. The cable uses red and white insulated conductors, a clear LDPE monofilament filler, and a black PVC outer jacket. Custom XLR terminations use silver-pin contacts for low contact resistance.\u003c\/p\u003e\u003cp\u003eThe PLATINUM STUDIO 50 fits systems that need a premium long-run XLR connection rather than an adapter or speaker cable. Use it between compatible 3-pin XLR equipment, including microphones and balanced analog or AES\/EBU devices. It can also be used with powered speakers or subwoofers that accept balanced XLR connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Foot XLR Run:\u003c\/strong\u003e Provides substantial reach for studio routing and equipment placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18 AWG OFC Conductors:\u003c\/strong\u003e Uses high-purity oxygen-free copper signal conductors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced XLR Configuration:\u003c\/strong\u003e Connects a 3-pin XLR male output to a female input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAES3 Compliance:\u003c\/strong\u003e Supports compatible AES\/EBU digital-audio signal paths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Capacitance Design:\u003c\/strong\u003e Helps preserve analog-signal performance over longer runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral RF Shield:\u003c\/strong\u003e Provides full-coverage shielding against interference.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PLATINUM STUDIO 50 is assembled around Mogami W3402 cable with two 18 AWG OFC conductors, CPP insulation, a clear LDPE filler, a served shield, and a black PVC jacket. Its cable outer diameter is specified at 7.8 ± 0.5 mm. The terminated cable uses Mogami 3-pin XLR male and female connectors.\u003c\/p\u003e\u003cp\u003eRoute the cable between devices with matching 3-pin XLR connectors, keeping it clear of pinch points and avoiding unnecessary strain on the connectors. It is suited to installed or controlled studio environments rather than frequent rough handling. For AES\/EBU use, connect compatible XLR digital outputs and inputs; no adapter is included.\u003c\/p\u003e","brand":"Mogami","offers":[{"title":"Default Title","offer_id":45599306186822,"sku":"PLATINUM STUDIO 50","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61eUmS5W4iL_944024c2-1eb8-4e81-a9e9-80c47473d6ad.jpg?v=1784265157"},{"product_id":"zoom-exh-6e-dual-xlr-trs-input-capsule","title":"Zoom EXH-6e Dual XLR\/TRS Input Capsule","description":"\u003cp\u003eThe Zoom EXH-6e is an external input capsule that expands compatible Zoom recorders with additional microphone and line-level connections. It adds two locking XLR\/TRS combo inputs along with a 3.5 mm stereo mic\/line input. This makes it useful when a recording setup needs more sources than the recorder’s installed inputs can accommodate.\u003c\/p\u003e\u003cp\u003eDesigned for use with the Zoom H6essential, H5studio, and H6studio, the EXH-6e provides a practical way to connect microphones, mixers, keyboards, and other line-level equipment. The XLR\/TRS combo jacks accept mic or line signals without requiring input-gain adjustment on the capsule. Individual INPUT A and INPUT B buttons activate the two combo inputs.\u003c\/p\u003e\u003cp\u003eFor condenser microphones, the EXH-6e supports +48 V phantom power on its XLR inputs. Phantom power requires an external supply connected to the capsule’s USB-C port, such as a USB battery or compatible AC adapter. A phantom-power indicator shows when the capsule is connected to power and able to supply phantom power.\u003c\/p\u003e\u003cp\u003eThe built-in 3.5 mm stereo MIC\/LINE input adds another connection option for stereo feeds, lavalier microphones, and other compatible devices. Its plug-in-power switch supports microphones that require plug-in power through the stereo mini jack. This separate input broadens the capsule’s usefulness for portable interviews, location work, music capture, and content production.\u003c\/p\u003e\u003cp\u003eZoom Capsule System 3.0 provides the connection between the EXH-6e and compatible recorders. The capsule supports 32-bit float recording when used with a compatible recorder, helping it fit into current Zoom Essential and Studio recording workflows. It is a focused expansion accessory for users who need extra physical inputs while retaining a compact recorder-based setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Combo Inputs:\u003c\/strong\u003e Two locking XLR\/TRS combo jacks accept microphone- or line-level sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5 mm MIC\/LINE Input:\u003c\/strong\u003e Stereo mini input accommodates compatible microphones and stereo line feeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Phantom Power:\u003c\/strong\u003e USB-C power enables +48 V phantom power for condenser microphones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-In Power:\u003c\/strong\u003e Switchable plug-in power supports compatible microphones connected through the 3.5 mm input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Bit Float Ready:\u003c\/strong\u003e Supports 32-bit float recording with compatible Zoom recorders.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapsule System 3.0:\u003c\/strong\u003e Uses Zoom’s current capsule connection system for compatible H-series recorders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EXH-6e is a compact external input capsule with two locking XLR\/TRS combo connectors, dedicated input buttons and status indicators, a phantom-power indicator, a USB-C power port, and a 3.5 mm stereo MIC\/LINE jack. Its connector layout separates the two combo inputs from the mini-jack input, helping users organize multiple source types on a portable recording setup. The capsule measures 78.1 mm wide, 56.7 mm deep, and 43.9 mm high, and weighs 96 g.\u003c\/p\u003e\u003cp\u003eInstall the EXH-6e in the capsule connection on a compatible Zoom H6essential, H5studio, or H6studio recorder. Connect microphones through XLR, line-level equipment through TRS, or a compatible stereo source or lavalier through the 3.5 mm MIC\/LINE input. When using condenser microphones on INPUT A or B, connect a USB battery or compatible AC adapter to the capsule’s USB-C port before enabling phantom power.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669224349766,"sku":"ZEXH6e","price":109.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61AMRcYCnYL.jpg?v=1784484256"},{"product_id":"zoom-h1-xlr-2-channel-32-bit-float-audio-recorder","title":"Zoom H1 XLR 2-Channel 32-Bit Float Audio Recorder","description":"\u003cp\u003eThe Zoom H1 XLR is a compact two-channel recorder designed for capturing microphones, instruments, mixer feeds, and other audio sources away from a studio. It provides two locking XLR\/TRS combo inputs alongside a 3.5 mm stereo mic\/line input for flexible source connection. Its portable format suits musicians, filmmakers, podcasters, and creators who need a dedicated recorder with professional-style input options.\u003c\/p\u003e\u003cp\u003e32-bit float WAV recording and dual A\/D converter circuits are central to the H1 XLR design. This approach gives recordings broad usable dynamic range and removes the need for conventional input-gain adjustment on the XLR\/TRS inputs. Recording is available at 44.1, 48, or 96 kHz in stereo or mono.\u003c\/p\u003e\u003cp\u003eIts two combo inputs accept XLR or 1\/4-inch TRS connections, with individual hardware mic\/line level switches. The recorder can accept microphone-level sources or professional line-level feeds up to +24 dBu in line mode. It also supplies +48 V phantom power for compatible condenser microphones and 2.5 V plug-in power through its stereo mini input.\u003c\/p\u003e\u003cp\u003eThe 128 x 64 OLED display includes a real-time waveform view to help monitor recording activity. A built-in mixer allows adjustment of each track's input level, while the 3.5 mm phone\/line output supports headphone monitoring or connection to a camera. An onboard speaker provides quick playback reference without requiring headphones.\u003c\/p\u003e\u003cp\u003eThe H1 XLR records directly to compatible microSDHC and microSDXC cards, with support up to 1 TB. Its USB-C connection also enables a 2-in\/2-out USB audio interface for computers and compatible mobile devices, including simultaneous SD-card recording. Power can come from two AA batteries, USB bus power, an external USB battery pack, or the optional Zoom AD-17 AC adapter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e32-Bit Float Recording:\u003c\/strong\u003e Captures WAV audio at up to 96 kHz with a wide working dynamic range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual XLR\/TRS Combo Inputs:\u003c\/strong\u003e Connect two microphones, instruments, or balanced line-level sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMic And Line Switching:\u003c\/strong\u003e Hardware switches set each combo input for the connected source type.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOLED Waveform Display:\u003c\/strong\u003e Shows recording activity and provides clear navigation in a compact screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-C Audio Interface:\u003c\/strong\u003e Delivers stereo 2-in\/2-out audio interface operation with compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003emicroSDXC Recording:\u003c\/strong\u003e Supports compatible microSDXC cards up to 1 TB for extended recording sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H1 XLR is a handheld recorder with a 128 x 64 OLED display, physical controls, locking combo input connectors, and a built-in 20 mm by 30 mm elliptical dynamic speaker. Its compact housing measures 62.1 mm wide, 107 mm deep, and 39.3 mm high. A built-in 1\/4-20 tripod mount provides an option for tripod, camera-rig, or accessory mounting.\u003c\/p\u003e\u003cp\u003eFor setup, insert a compatible microSDHC or microSDXC card, connect microphones or line sources to the appropriate inputs, and select mic or line mode for each combo input. Use XLR connections for microphones or balanced sources, the 3.5 mm input for compatible stereo mics, lavaliers, phones, or similar devices, and the 3.5 mm output for headphones or camera audio input. The recorder can operate from two AA batteries or USB-C power; use a data-capable USB cable when connecting it for audio interface or file-transfer use.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669226676294,"sku":"ZH1 XLR","price":149.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61IwS1klpVL.jpg?v=1784485307"},{"product_id":"zoom-smc-1-3-5mm-stereo-mini-cable-for-dslr-cameras","title":"Zoom SMC-1 3.5mm Stereo Mini Cable for DSLR Cameras","description":"\u003cp\u003eThe Zoom SMC-1 is a stereo mini cable designed to send audio from a compatible Zoom recorder to a DSLR camera's audio input. It provides a direct wired connection for creators who want recorded or monitored audio routed into their camera. The cable uses 3.5mm stereo connections at both ends.\u003c\/p\u003e\u003cp\u003eThis accessory is made for videographers using the Zoom F1 Field Recorder with a DSLR camera. It helps keep the recorder and camera connected during compact run-and-gun shooting setups. The coiled cable format is intended to keep excess cable more manageable around a camera rig.\u003c\/p\u003e\u003cp\u003eThe SMC-1 carries a stereo analog audio signal rather than processing or amplifying sound itself. Its purpose is to transfer the audio signal from the recorder to the camera input. This makes it a straightforward connection accessory for camera-based recording workflows.\u003c\/p\u003e\u003cp\u003eZoom identifies the SMC-1 specifically as a stereo mini cable for DSLR use. Both cable ends use 3.5mm connectors, allowing it to link compatible stereo mini-jack audio connections. It is a useful replacement or additional cable for users building a recorder-to-camera setup.\u003c\/p\u003e\u003cp\u003eUse the SMC-1 when a Zoom F1 Field Recorder is serving as the audio source for a DSLR camera. The recorder and camera are sold separately, and the camera must have a compatible 3.5mm audio input. The cable can also be kept as a spare for supported Zoom recording configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm Stereo Connections:\u003c\/strong\u003e Uses 3.5mm stereo connectors on both ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-To-TRS Design:\u003c\/strong\u003e Supports stereo mini-jack audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZoom F1 Compatibility:\u003c\/strong\u003e Designed to connect the F1 Field Recorder to a DSLR.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Audio Feed:\u003c\/strong\u003e Routes recorder audio into a DSLR camera input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoiled Cable Format:\u003c\/strong\u003e Helps keep cable slack more controlled around a rig.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Accessory:\u003c\/strong\u003e Includes the SMC-1 cable for compatible recording setups.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SMC-1 is a compact coiled audio cable with 3.5mm stereo connectors at each end. Its purpose-built DSLR configuration keeps the connection format simple for compatible recorder and camera setups. Zoom classifies it as a cable accessory rather than a recorder, microphone, or adapter.\u003c\/p\u003e\u003cp\u003eConnect one 3.5mm end to the compatible audio output of the Zoom recorder and the other to the DSLR camera's 3.5mm audio input. Confirm that the camera has a compatible stereo mini-jack input before purchase. Set and monitor recording levels on the connected equipment as required by the recorder and camera.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669289033798,"sku":"ZSMC1","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51Fm9kBd-bL.jpg?v=1784488522"},{"product_id":"zoom-txf-8-ta3-female-to-xlr-male-cable-2-pack","title":"Zoom TXF-8 TA3 Female to XLR Male Cable 2-Pack","description":"\u003cp\u003eThe Zoom TXF-8 is a two-cable adapter set designed to connect compatible mini-XLR balanced outputs to standard full-size XLR inputs. It provides a direct interface for routing audio from a Zoom F8 or F8n field recorder into mixers, cameras, recorders, and other equipment with XLR input connections. Each cable uses a female TA3 connector on one end and a male XLR connector on the other.\u003c\/p\u003e\u003cp\u003eThis set is intended for location-recording and production workflows where a recorder’s compact TA3 main outputs need to integrate with conventional XLR-based audio equipment. The pair of cables supports two-channel output routing, making it practical for left\/right main-output connections. Its 26-inch length is suited to close-range connections within an audio bag, camera rig, or portable production setup.\u003c\/p\u003e\u003cp\u003eThe TXF-8 carries balanced audio from the recorder’s mini-XLR output format to a full-size XLR connection. This connector arrangement helps maintain a proper balanced signal path when connecting to compatible XLR inputs. It is a functional adapter solution rather than a standalone audio processor or signal converter.\u003c\/p\u003e\u003cp\u003eZoom designs the TXF-8 specifically for the F8 and F8n MultiTrack Field Recorders. The cable format addresses the physical connector difference between the recorders’ TA3 balanced outputs and the full-size XLR inputs commonly found on external gear. Users can add the cables where a standard XLR connection is required at the receiving device.\u003c\/p\u003e\u003cp\u003eFor an existing field-recording system, the TXF-8 serves as a compact output-accessory upgrade. Use one cable for a mono feed or both cables for a two-channel main-output connection. Confirm the destination device has compatible female XLR inputs and that the equipment’s required signal level is set appropriately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Cable Set:\u003c\/strong\u003e Includes two adapter cables for dual-channel routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFemale TA3 Connection:\u003c\/strong\u003e Connects to compatible mini-XLR balanced recorder outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMale XLR Connection:\u003c\/strong\u003e Terminates in a standard full-size XLR male plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Output Routing:\u003c\/strong\u003e Adapts balanced TA3 output connections to XLR inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26-Inch Length:\u003c\/strong\u003e Supports tidy, close-range equipment connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF8 and F8n Compatibility:\u003c\/strong\u003e Designed for Zoom F8 and F8n recorders.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TXF-8 uses a purpose-built connector layout: female TA3 mini-XLR at the recorder side and male full-size XLR at the destination side. Its short cable format is designed for portable audio workflows where equipment is positioned close together. The set contains two matching cables for consistent left\/right or dual-output routing.\u003c\/p\u003e\u003cp\u003eConnect each female TA3 end to a compatible balanced TA3 output, then connect the male XLR end to a receiving device’s female XLR input. Use one cable for a single output feed or both cables for a two-channel connection. Before use, verify connector compatibility, channel assignments, and the input level required by the receiving equipment.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669289295942,"sku":"ZTXF8","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61M3VGl-FhL.jpg?v=1784488640"},{"product_id":"zoom-exh-8-quad-xlr-input-capsule-for-h8","title":"Zoom EXH-8 Quad XLR Input Capsule for H8","description":"\u003cp\u003eThe Zoom EXH-8 is an external input expansion capsule made specifically for the Zoom H8 Handy Recorder. It adds four locking XLR inputs, giving the recorder more capacity for multi-microphone sessions and sources from mixers. It is intended for users who need more than the H8's built-in input complement without changing to a separate recorder.\u003c\/p\u003e\u003cp\u003eThis capsule is a practical fit for podcast panels, location sound, rehearsals, live music capture, and other sessions requiring several individually connected microphones. With the EXH-8 installed, the H8 can accept up to 10 input channels in total. Each added input has its own control hardware for quicker level adjustment at the recorder.\u003c\/p\u003e\u003cp\u003eThe EXH-8 is designed to manage microphone and mixer signals rather than act as a microphone itself. It accepts dynamic microphones, condenser microphones, mixers, and other compatible XLR sources. Individual input volume knobs help balance varied source levels before recording.\u003c\/p\u003e\u003cp\u003eEach of the four channels includes a dedicated -20 dB pad switch for handling stronger signals, including equipment using +4 dBu line level. This attenuation can help prevent overload when connecting a mixer or other professional line-level source. Track buttons for inputs 1 through 4 provide direct channel activation control.\u003c\/p\u003e\u003cp\u003ePart of Zoom Capsule System 2.0, the EXH-8 mounts to the H8 through the recorder's capsule connection. Phantom power can be supplied to connected condenser microphones when external DC 5V USB power is connected to the capsule. This makes the EXH-8 a focused expansion path for H8 owners building a higher-input-count recording setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour XLR Inputs:\u003c\/strong\u003e Adds four locking XLR channels to a Zoom H8.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Gain Knobs:\u003c\/strong\u003e Adjust each added input level independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e-20 dB Pads:\u003c\/strong\u003e Helps accommodate louder line-level equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhantom-Power Support:\u003c\/strong\u003e Supports condenser mics with external USB power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrack Controls:\u003c\/strong\u003e Dedicated buttons activate or deactivate inputs 1–4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapsule System 2.0:\u003c\/strong\u003e Integrates directly with the Zoom H8 recorder.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EXH-8 uses a purpose-built capsule format with four locking 3-pin XLR input connectors, four volume knobs, four pad switches, track buttons, and a power indicator. Zoom does not publish a material composition for the capsule. Its control layout places channel-specific adjustments directly on the expansion module for accessible setup in recording environments.\u003c\/p\u003e\u003cp\u003eInstall the EXH-8 by attaching it to the Zoom H8 capsule connection; no separate mounting hardware is specified. Update the H8 to firmware version 2.0 or later before use, and connect an external DC 5V USB power source to the EXH-8 when phantom power is needed for condenser microphones. Zoom AD-17 is identified as a compatible dedicated AC adapter, while ECM-3 and ECM-6 capsule extension cables are not supported with this capsule.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669306531910,"sku":"ZVRH8","price":169.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51tsIcTl4eL.jpg?v=1784488993"},{"product_id":"zoom-zxlr4c-cp-8-2-xlr-microphone-cable-4-pack","title":"Zoom ZXLR4c\/CP 8.2' XLR Microphone Cable 4-Pack","description":"\u003cp\u003eThe Zoom ZXLR4c\/CP is a four-cable XLR microphone set designed for organized podcast, music-recording, and spoken-word setups. Each cable provides a standard 3-pin XLR female-to-male connection for linking a microphone to a compatible mixer, recorder, interface, or other XLR-equipped audio input. The included identification rings help keep multi-microphone systems clear and easier to manage.\u003c\/p\u003e\u003cp\u003eThis set is well suited to creators running panel podcasts, compact studios, rehearsal spaces, and portable recording rigs. With four matching cables in the package, it can support a four-microphone arrangement without mixing cable lengths or styles. Color coding helps users follow each microphone's route to the corresponding recording channel.\u003c\/p\u003e\u003cp\u003eThe cables are specified as low-noise microphone cables for dependable signal routing in recording applications. Their 8.2-foot, or 2.5-meter, length offers practical reach between microphones and nearby audio equipment. Heavy-duty XLR connectors are included to support repeated setup and teardown.\u003c\/p\u003e\u003cp\u003eFour pairs of color-coded rings are supplied, providing eight rings in total for marking both ends of four cable runs. The ring colors are red, orange, yellow, and green, allowing each cable path to be visually distinguished. This can reduce confusion when connecting several microphones to separate inputs.\u003c\/p\u003e\u003cp\u003eThe ZXLR4c\/CP fits naturally alongside XLR microphones, multichannel podcast recorders, mixers, and audio interfaces. It is a straightforward cable package for users building or expanding a wired microphone system. No active electronics, power supply, or signal processing is built into the cables.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Cable Set:\u003c\/strong\u003e Provides four matching XLR microphone cables for multi-mic setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Noise Construction:\u003c\/strong\u003e Designed for microphone signal routing in recording applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8.2-Foot Length:\u003c\/strong\u003e Gives each cable 2.5 meters of usable reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor ID Rings:\u003c\/strong\u003e Helps identify individual microphone and channel connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Rings Included:\u003c\/strong\u003e Four matched pairs mark both ends of cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty XLR Connectors:\u003c\/strong\u003e Built for regular recording and production use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZXLR4c\/CP uses black cable jackets and heavy-duty 3-pin XLR connectors. Each cable has one female XLR connector and one male XLR connector, matching the standard connection arrangement used by many microphones and audio devices. The included rings provide a simple visual organization method without changing the cable's audio connection.\u003c\/p\u003e\u003cp\u003eConnect the female end of each cable to a compatible XLR microphone and the male end to a compatible XLR input on a recorder, mixer, or audio interface. Assign a matching pair of colored rings to the connectors at each end of the same cable, then match that color to the intended input channel. The 8.2-foot cable length is most practical for close-range desktop, tabletop, studio, and portable recording configurations.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669307220038,"sku":"ZXLR4c\/CP","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Wjh9JkmUL.jpg?v=1784489222"},{"product_id":"roland-rcc-10-tr2r-10-foot-1-4-inch-trs-to-dual-rca-cable","title":"Roland RCC-10-TR2R 10-Foot 1\/4-Inch TRS to Dual RCA Cable","description":"\u003cp\u003eThe Roland RCC-10-TR2R is a Black Series insert\/splitter cable with one 1\/4-inch TRS male connector and two RCA male connectors. Its 10-foot length supports clean, practical connections between compatible audio components with differing connector formats. It is intended for signal-routing tasks in music, DJ, studio, and other line-level audio setups.\u003c\/p\u003e\u003cp\u003eThis cable is suited to users who need to break out the conductors of a 1\/4-inch TRS connection to separate RCA connections. It can be useful when integrating effects processors, mixers, instruments, playback equipment, or other compatible gear. Confirm the connector type and signal-routing requirements of both devices before installation.\u003c\/p\u003e\u003cp\u003eRoland uses multi-strand, oxygen-free copper core wire in the Black Series construction. High-density spiral copper shielding is designed to help protect the audio signal from interference. The low-capacitance cable design supports wide frequency reproduction and dynamic response.\u003c\/p\u003e\u003cp\u003eHeavy-duty connectors give the RCC-10-TR2R a dependable physical connection point for routine setup and teardown. The cable has straight male connectors at both ends, with a single TRS plug at one end and two RCA plugs at the other. Its black finish helps it blend into most audio rigs and equipment installations.\u003c\/p\u003e\u003cp\u003eAs a passive interconnect cable, the RCC-10-TR2R does not add amplification, wireless functionality, or audio processing. Instead, it serves as a connection link within a compatible audio system. It is a focused option for installations that specifically require a 1\/4-inch TRS-to-dual-RCA insert\/splitter format.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRS-to-RCA Split:\u003c\/strong\u003e Connects one 1\/4-inch TRS plug to two RCA plugs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Foot Length:\u003c\/strong\u003e Provides 10 feet of routing flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen-Free Copper Core:\u003c\/strong\u003e Uses multi-strand copper conductor wire.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Copper Shielding:\u003c\/strong\u003e Helps reduce interference around audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Capacitance Design:\u003c\/strong\u003e Supports full-frequency signal transmission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Connectors:\u003c\/strong\u003e Built for reliable repeated equipment connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RCC-10-TR2R uses multi-strand oxygen-free copper core wire, high-density spiral copper shielding, and heavy-duty connectors. Its straight connector layout consists of one male 1\/4-inch TRS plug and two male RCA plugs. The cable is finished in black and is part of Roland's Black Series interconnect cable range.\u003c\/p\u003e\u003cp\u003eConnect the 1\/4-inch TRS end to a compatible TRS jack and the two RCA ends to the corresponding RCA connections on compatible equipment. Keep the cable separated from AC power wiring where practical, avoid sharply bending the cable near its connectors, and verify device manuals for correct insert, send\/return, or stereo routing. This cable is for analog audio interconnection and does not replace an adapter, converter, or powered signal interface where one is required.\u003c\/p\u003e","brand":"Roland","offers":[{"title":"Default Title","offer_id":45669328453702,"sku":"RCC-10-TR2R","price":14.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81YynajWK0L.jpg?v=1784491022"}],"url":"https:\/\/audiowatt.store\/collections\/microphone-cables.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}