{"title":"Memphis","description":null,"products":[{"product_id":"memphis-0fo51-1-0-awg-ofc-power-wire-51-ft-spool","title":"Memphis 0FO51 1\/0 AWG OFC Power Wire, 51-Ft Spool","description":"\u003cp\u003eThe Memphis 0FO51 is a 51-foot spool of 0 AWG, also known as 1\/0 AWG, power wire for car audio electrical installations. It provides the cable needed to route power between a vehicle battery and compatible high-current audio equipment. The orange jacket helps distinguish this run during a custom installation. It is intended for installers and enthusiasts building or upgrading an amplified audio system.\u003c\/p\u003e\u003cp\u003eThis wire uses oxygen-free copper conductors and is built to the True AWG standard stated by Memphis. A large 0 AWG conductor size is suited to applications where a substantial power cable is required. Selecting the proper wire size is an important part of controlling voltage loss in a vehicle audio power path. Final cable, fuse, and amplifier selection should always follow the amplifier manufacturer's installation requirements.\u003c\/p\u003e\u003cp\u003eThe 0FO51 is power wire, not speaker wire or RCA signal cable. Its 51-foot spool format offers a continuous length that can be measured and cut for a vehicle-specific routing plan. That can be useful for installations requiring a long front-to-rear battery-to-amplifier run. The orange finish is associated with positive-side power wiring in the Memphis connection-wire range.\u003c\/p\u003e\u003cp\u003eMemphis specifies a flexible, protective outer jacket for the 0FO51. This construction is designed to make routing more manageable while helping protect the conductor during installation. The cable is appropriate for use in custom car-audio wiring layouts where cable routing, termination, and circuit protection are planned as part of the overall system. It should be paired with properly sized terminals, a fuse holder, and fuse selected for the connected equipment.\u003c\/p\u003e\u003cp\u003eFor a complete amplifier installation, the 0FO51 can serve as the main positive power-cable run when its gauge and length fit the system design. A matching ground cable, secure connection hardware, and properly located circuit protection are also required for a typical installation. Memphis lists compatible connection accessories separately, rather than identifying them as included with this spool. Professional installation is recommended when routing through vehicle panels or working near the battery.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0 AWG Power Cable:\u003c\/strong\u003e Large-gauge cable for high-current car-audio power runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e51-Foot Spool:\u003c\/strong\u003e Provides a continuous length for custom-cut installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen-Free Copper:\u003c\/strong\u003e OFC conductor material supports efficient electrical power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue AWG Standard:\u003c\/strong\u003e Built to the gauge specification stated by Memphis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrange Jacket:\u003c\/strong\u003e Makes the cable easy to identify in an installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Protective Jacket:\u003c\/strong\u003e Helps with routing while protecting the wire.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Memphis 0FO51 combines an oxygen-free copper conductor with a flexible, protective orange jacket. It is specified as 0 AWG power wire and supplied as a 51-foot spool. The jacketed construction is intended for dependable routing in a custom vehicle-audio installation.\u003c\/p\u003e\u003cp\u003eMeasure the planned battery-to-amplifier route before cutting the cable and leave appropriate service length for secure termination. Use terminals, a fuse holder, a fuse, and a ground cable sized for the connected equipment and installed according to the amplifier and vehicle guidelines. Keep the power wire protected from sharp edges, heat sources, and moving parts, and use suitable grommets where it passes through metal panels.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633167654982,"sku":"0FO51","price":19.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_865be15d-4e76-415b-bafe-83fe5d3a624c.jpg?v=1784408168"},{"product_id":"memphis-4fo100-4-awg-orange-ofc-power-wire-100-ft","title":"Memphis 4FO100 4 AWG Orange OFC Power Wire, 100 Ft","description":"\u003cp\u003eThe Memphis 4FO100 is a 100-foot spool of 4 AWG orange power wire for vehicle audio installations. It provides the bulk cable needed to route amplifier power through a custom car-audio system. This is a connection product rather than an amplifier, speaker, or signal processor.\u003c\/p\u003e\u003cp\u003eThis wire is intended for installers and DIY enthusiasts building or refreshing an amplifier power run. Its 100-foot spool format is useful when multiple runs, custom cable lengths, or more than one installation are planned. The orange jacket makes it easy to identify within a power-wire layout.\u003c\/p\u003e\u003cp\u003eMemphis specifies oxygen-free copper construction to support efficient electrical power transfer. The wire is built to the true AWG standard, so its 4 AWG designation is intended to match the stated conductor size. Proper wire sizing is an important part of supplying an amplifier from the vehicle electrical system.\u003c\/p\u003e\u003cp\u003eA flexible, protective jacket surrounds the conductor for easier routing and added protection during installation. That construction helps the cable follow vehicle contours while keeping the insulated run organized. The product is supplied as orange power wire on a 100-foot spool.\u003c\/p\u003e\u003cp\u003eThe 4FO100 fits into a system upgrade path wherever a 4 AWG power cable is appropriate for the amplifier and installation design. It should be paired with correctly sized terminals, a fuse holder and fuse, and other installation hardware selected for the specific system. Professional installation is recommended when routing power cable through vehicle panels or near the battery.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 AWG Size:\u003c\/strong\u003e Provides a substantial power-wire gauge for compatible amplifier installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100-Foot Spool:\u003c\/strong\u003e Supplies bulk cable for custom-length power runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen-Free Copper:\u003c\/strong\u003e Uses OFC conductor material for electrical power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue AWG Standard:\u003c\/strong\u003e Maintains the manufacturer-stated 4 AWG wire sizing standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOrange Jacket:\u003c\/strong\u003e Helps identify the cable in an organized installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Protective Jacket:\u003c\/strong\u003e Supports routing while protecting the insulated conductor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 4FO100 uses an oxygen-free copper conductor with an orange, flexible protective jacket. Memphis identifies it as power wire and supplies it on a spool, allowing the installer to cut cable to the required length. Its true-AWG construction is intended to provide the stated 4 AWG wire size.\u003c\/p\u003e\u003cp\u003eUse this wire for a compatible amplifier power run and plan the route before cutting. Select terminals, fuse protection, and other connection hardware that match the amplifier requirements and the vehicle installation. Keep the cable protected from sharp edges, heat sources, and moving components, and follow the amplifier and vehicle manufacturers' installation guidance.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633167720518,"sku":"4FO100","price":6.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_41d97f9e-30c5-444a-9b44-555a96c945c0.jpg?v=1784408197"},{"product_id":"memphis-76prx500-4v2-4-channel-500w-car-amplifier","title":"Memphis 76PRX500.4V2 4-Channel 500W Car Amplifier","description":"\u003cp\u003eThe Memphis 76PRX500.4V2 is a four-channel Class D car amplifier designed to add dedicated power and tuning control to an aftermarket speaker system. It delivers up to 125 watts RMS to each of four channels at 2 ohms, making it suited to powering front and rear speakers or a component-speaker setup. Its compact footprint helps address installations where available mounting space is limited.\u003c\/p\u003e\u003cp\u003eThis 250th Anniversary Special Edition version uses red, white, and blue LED accent lighting for a commemorative visual presentation. A white LED acrylic top cover and concealed top-mounted controls keep the amplifier's adjustment area accessible while maintaining a clean installed appearance. Red top ground lighting and blue bottom ground lighting provide the additional accent illumination.\u003c\/p\u003e\u003cp\u003eFor system tuning, the amplifier provides variable crossovers using 12 dB\/octave Butterworth slopes. Its variable EQ boost adjusts from 0 to 12 dB, allowing an installer to tailor the response to the speakers and vehicle. The full-range frequency response is rated from 10 Hz to 27 kHz with total harmonic distortion below 1%.\u003c\/p\u003e\u003cp\u003eThe 76PRX500.4V2 supplies 75 watts RMS per channel into 4-ohm speakers or 125 watts RMS per channel into 2-ohm speakers. It can also be bridged into two channels rated at 250 watts RMS each into 4 ohms. This gives it flexibility for four full-range speakers or a mixed system that uses bridged channels where appropriate.\u003c\/p\u003e\u003cp\u003eAn extruded aluminum heatsink supports the compact chassis design, which measures 8.6 by 5.7 by 2.16 inches. Selectable amplifier turn-on adds installation flexibility when integrating with compatible source units. Memphis lists the 8GKIT as the recommended amplifier installation kit for this model.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Output:\u003c\/strong\u003e Powers four speakers with up to 125W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Design:\u003c\/strong\u003e Configures as two bridged 250W RMS channels at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Butterworth Crossovers:\u003c\/strong\u003e Helps match the amplifier output to the speakers being used.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable EQ Boost:\u003c\/strong\u003e Provides 0–12 dB of adjustable tonal enhancement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecial Edition LED Accents:\u003c\/strong\u003e Uses red, white, and blue lighting details for a commemorative appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Aluminum Chassis:\u003c\/strong\u003e Fits in space-conscious installations while using an extruded aluminum heatsink.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier combines an extruded aluminum heatsink with an LED-accented acrylic top panel. Its top-mounted controls are hidden beneath the panel, keeping the adjustment area protected and visually tidy. The Special Edition lighting includes red top ground lighting, a white LED top cover, and blue bottom ground lighting.\u003c\/p\u003e\u003cp\u003eMount the amplifier where its 8.6 by 5.7 by 2.16-inch chassis can be secured and where wiring and control access remain practical. Use speakers wired for supported 2-ohm or 4-ohm stereo loads, or 4-ohm loads when bridging channels. Memphis recommends its 8GKIT amplifier installation kit for this model.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633167949894,"sku":"76PRX500-4V2","price":349.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71dIZ-az_jL.jpg?v=1784408238"},{"product_id":"memphis-76prxl12ftv-12-rgb-led-selectable-impedance-subwoofer","title":"Memphis 76PRXL12FTV 12\" RGB LED Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis 76PRXL12FTV is a 12-inch Power Reference subwoofer designed for vehicle audio systems that need substantial low-frequency output while retaining installation flexibility. Its 500-watt RMS rating makes it suitable for a dedicated bass upgrade with a properly matched amplifier. This special-edition model pairs its performance focus with commemorative 250th Anniversary presentation details.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses Memphis FLEX Triple Voice Coil technology to let the installer select 1-ohm, 2-ohm, or 4-ohm operation through a jumper plug. That flexibility can simplify amplifier matching when system plans change or when choosing between different mono amplifier configurations. Select the impedance setting that is compatible with the amplifier before final wiring and setup.\u003c\/p\u003e\u003cp\u003eFor visual integration in a custom build, the 76PRXL12FTV includes an RGB LED illuminated cone accent. The lighting gives an enclosure or display-oriented installation an added visual element without changing the subwoofer's primary role as a bass driver. It is a practical fit for systems where the equipment will remain visible.\u003c\/p\u003e\u003cp\u003eIts black-on-black polypropylene cone, stitched butyl rubber surround, reinforced spider, and improved suspension are specified to support controlled cone movement. Woven tinsel leads provide the electrical connection to the moving assembly. Memphis also uses Direct Voice Coil Cooling technology to support thermal efficiency during extended playback.\u003c\/p\u003e\u003cp\u003eThe 76PRXL12FTV is intended for a custom subwoofer enclosure and a compatible external amplifier; it is not a self-powered subwoofer. With a 5.5-inch mounting depth and 11-inch cutout requirement, it can be planned into many conventional 12-inch enclosure designs after verifying internal clearance. The selectable impedance design makes it especially useful for an installer building around a specific amplifier load target.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for a substantial dedicated bass channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Triple Voice Coil:\u003c\/strong\u003e Select 1-, 2-, or 4-ohm operation with a jumper plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Cone Accent:\u003c\/strong\u003e Adds customizable illumination to visible enclosure installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct Voice Coil Cooling supports thermal efficiency during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Moving Assembly:\u003c\/strong\u003e Reinforced spider and improved suspension support controlled bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact 12-Inch Fitment:\u003c\/strong\u003e Requires 5.5 inches of depth and an 11-inch cutout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 76PRXL12FTV uses a black-on-black polypropylene cone with a stitched butyl rubber surround for a durable, understated appearance. Its 63-ounce magnet, 2-inch voice coil, reinforced spider, improved suspension, and woven tinsel leads form the specified motor and moving-system package. The RGB LED illuminated cone accent complements the special-edition styling for installations where the subwoofer is on display.\u003c\/p\u003e\u003cp\u003eInstall this subwoofer in an enclosure designed for a 12-inch driver, confirming the 11-inch cutout and 5.5-inch mounting-depth requirements before cutting or mounting. A compatible external subwoofer amplifier, appropriate enclosure, wiring, and installation hardware are needed for a complete system. Set the jumper plug for the amplifier-compatible 1-, 2-, or 4-ohm impedance option before completing the final wiring.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633168670790,"sku":"76PRXL12FTV","price":219.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81yWCQtfVYL.jpg?v=1784408280"},{"product_id":"memphis-canamdef10se-10-powered-can-am-defender-subwoofer","title":"Memphis CANAMDEF10SE 10\" Powered Can-Am Defender Subwoofer","description":"\u003cp\u003eThe Memphis CANAMDEF10SE is a direct-fit powered 10-inch subwoofer system made for compatible 2018 and newer Can-Am Defender vehicles. It adds dedicated low-frequency output while using an under-seat factory-style mounting location. The integrated amplifier and sealed enclosure simplify adding bass without selecting a separate subwoofer box and amplifier.\u003c\/p\u003e\u003cp\u003eThis system is intended for Can-Am Defender owners who want a compact bass upgrade while preserving usable cabin space. On 2-seat models, it mounts beneath the passenger seat. On 4-seat models, it can mount beneath the front passenger seat or either rear seat location.\u003c\/p\u003e\u003cp\u003eA built-in 350-watt RMS amplifier drives the included 10-inch woofer, with a 500-watt peak power rating. Its specified frequency range is 28 Hz to 120 Hz, covering the low-bass region that smaller speakers do not reproduce as fully. A wired bass knob is included for convenient output adjustment while riding.\u003c\/p\u003e\u003cp\u003eThe enclosure is rotomolded from high-density polyethylene and sealed for all-weather conditions. A mesh grille helps protect the RGB back-lit woofer in its under-seat location. The included sealed harness is designed for the powersports installation environment.\u003c\/p\u003e\u003cp\u003eThe CANAMDEF10SE can be used as the bass section of a broader Defender audio upgrade with compatible source and speaker equipment. Four-seat Defender configurations can accommodate up to three of these subwoofer systems in the specified seat locations. Confirm vehicle configuration before purchase, as this model does not fit 2026 HD11 Defender models.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Defender Design:\u003c\/strong\u003e Built for specified Can-Am Defender factory-style under-seat locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Woofer:\u003c\/strong\u003e Combines a full-size subwoofer with an integrated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Amplification:\u003c\/strong\u003e Provides dedicated continuous power for low-frequency reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotomolded HDPE Enclosure:\u003c\/strong\u003e Uses durable high-density polyethylene construction for powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Back-Lit Woofer:\u003c\/strong\u003e Adds illuminated styling behind the included mesh grille.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Knob:\u003c\/strong\u003e Lets the rider adjust subwoofer output from the control location.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CANAMDEF10SE uses a sealed, rotomolded HDPE enclosure rather than a conventional carpeted vehicle box. Its mesh grille covers the woofer, while RGB backlighting is integrated into the 10-inch driver. The enclosure is specified for all-weather conditions and includes a sealed harness.\u003c\/p\u003e\u003cp\u003eFor 2-seat Defender models, mount the enclosure under the passenger seat. For 4-seat models, use the front passenger or rear-seat locations; up to three units may be installed in the specified locations. Mounting hardware, the sealed harness, and bass knob are included, but verify the vehicle is not a 2026 HD11 model before installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633168703558,"sku":"CANAMDEF10SE","price":599.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81JSQ9RYMHL.jpg?v=1784408326"},{"product_id":"memphis-canamdef65re-6-5-can-am-defender-rear-speaker-pods","title":"Memphis CANAMDEF65RE 6.5\" Can-Am Defender Rear Speaker Pods","description":"\u003cp\u003eThe Memphis CANAMDEF65RE is a pair of direct-fit rear roof speaker pods engineered for compatible 2018-and-newer Can-Am Defender vehicles with a factory roof. It provides an OEM-location audio upgrade without requiring custom fabrication. The loaded pods place 6.5-inch coaxial speakers beneath the rear roof for a clean, integrated installation.\u003c\/p\u003e\u003cp\u003eThese pods are intended for Defender owners who want to add rear sound coverage while retaining a vehicle-specific mounting approach. Each pod uses a coaxial speaker with a tweeter bridge to reproduce full-range music from a compact enclosure. The system is rated for 75 watts RMS and 150 watts peak power.\u003c\/p\u003e\u003cp\u003eMemphis specifies a 92 dB sensitivity rating for the CANAMDEF65RE, supporting efficient output when matched with suitable amplification. The rotomolded enclosures are tuned for output and use a fully sealed design for water resistance. Marine-grade components help suit the product to outdoor powersports use.\u003c\/p\u003e\u003cp\u003eRGB illumination is built into the speaker cone, and an RGB speaker accent ring is included for added visual integration. This lighting feature can complement an existing RGB-equipped powersports audio system. The pods are designed as a rear-speaker addition rather than a complete source unit or amplifier package.\u003c\/p\u003e\u003cp\u003eThe CANAMDEF65RE fits Can-Am Defender models from 2018 onward when equipped with a compatible factory roof system. It is designed for Sport Roof, Deluxe Sport Roof, and Hard Cab Enclosure applications. For a fuller system build, pair the rear pods with an appropriate audio source, amplification, and front speakers as needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Rear Pods:\u003c\/strong\u003e Mount in compatible Can-Am Defender factory-roof locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Speakers:\u003c\/strong\u003e Provide full-range rear audio with tweeter bridges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Sealed Enclosures:\u003c\/strong\u003e Help provide water resistance for powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Cone Lighting:\u003c\/strong\u003e Illuminates the speakers and included accent rings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Harness:\u003c\/strong\u003e Simplifies connection in the intended vehicle application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CANAMDEF65RE uses lightweight, durable rotomolded rear roof enclosures with marine-grade components. Its fully sealed construction is designed for water resistance, while the integrated RGB-lit speaker cones and included RGB rings add a coordinated appearance. The package is supplied as a pair of rear speaker pods.\u003c\/p\u003e\u003cp\u003eInstallation is intended for 2018-and-newer Can-Am Defender models with a factory roof, using direct-fit OEM mounting locations. Mounting hardware and a plug-and-play harness are included; confirm that the vehicle has a Sport Roof, Deluxe Sport Roof, or Hard Cab Enclosure before purchase. These pods do not fit XT or Mossy Oak Hunting models.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633168736326,"sku":"CANAMDEF65RE","price":179.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71PLtCPcQlL.jpg?v=1784408366"},{"product_id":"memphis-canamx310se-maverick-x3-10-powered-subwoofer","title":"Memphis CANAMX310SE Maverick X3 10\" Powered Subwoofer","description":"\u003cp\u003eThe Memphis CANAMX310SE is a vehicle-specific powered 10-inch subwoofer enclosure for Can-Am Maverick X3 models. It combines a Memphis shallow subwoofer, an internal amplifier, and a molded enclosure in one integrated bass upgrade. The system is designed to add low-frequency output without requiring a separate subwoofer box and amplifier installation.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for Can-Am Maverick X3 models from 2017 and newer. Its direct-fit design is made for riders who want an audio upgrade that follows the vehicle's factory layout rather than a universal custom installation. The enclosure mounts beneath either the driver or passenger seat.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated for 200 watts RMS and 400 watts peak power. That power is matched to the included 10-inch shallow subwoofer for dedicated bass reinforcement in a powersports audio system. An included remote bass knob provides convenient level adjustment after the system gain has been set.\u003c\/p\u003e\u003cp\u003eFor off-road use, the CANAMX310SE uses an HDPE rotational-molded enclosure and sealed connectors. The assembly is IP66 rated to support use around dust and water exposure associated with trail riding. Its integrated marine-grade amplifier keeps the powered-subwoofer design compact and purpose-built.\u003c\/p\u003e\u003cp\u003eA plug-and-play wire harness and vehicle-specific mounting hardware are included to support installation in the intended Maverick X3 application. RCA inputs allow connection to a compatible audio source, while dedicated power, ground, and turn-on wiring connect the enclosure to the vehicle. It can serve as a focused bass addition to an existing or expanding Maverick X3 audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Subwoofer:\u003c\/strong\u003e Provides dedicated bass output in a compact direct-fit enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Delivers 200 watts RMS and 400 watts peak power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Rating:\u003c\/strong\u003e Supports use in dusty and wet powersports environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDPE Enclosure:\u003c\/strong\u003e Rotational-molded construction is designed for durable vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Knob:\u003c\/strong\u003e Lets you trim bass level from a convenient location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-And-Play Harness:\u003c\/strong\u003e Simplifies wiring for the intended Maverick X3 application.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CANAMX310SE uses a high-density polyethylene rotational-molded enclosure with a black HDPE composite finish. Its sealed connectors and IP66-rated construction are designed for the vibration, moisture, and debris encountered in powersports use. The enclosure contains the 10-inch Memphis shallow subwoofer and internal marine-grade amplifier.\u003c\/p\u003e\u003cp\u003eThe enclosure is designed to install beneath either front seat of a compatible 2017-and-newer Can-Am Maverick X3. Rear metal brackets, front washers and bolts, a plug-and-play harness, and mounting hardware are included for the vehicle-specific installation. Connect power directly to the battery through a 30-amp fuse, connect ground to battery negative, connect the blue lead to ACC\/key turn-on, and feed audio through the RCA inputs.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171357766,"sku":"CANAMX310SE","price":599.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81VrH1hMV1L.jpg?v=1784408430"},{"product_id":"memphis-canamx365fe-6-5-can-am-x3-front-speaker-pods","title":"Memphis CANAMX365FE 6.5\" Can-Am X3 Front Speaker Pods","description":"\u003cp\u003eThe Memphis CANAMX365FE is a pair of direct-fit 6.5-inch front speaker pods designed for 2017 and newer Can-Am Maverick X3 models. It provides a vehicle-specific way to add front audio without building custom enclosures. The pods mount in OEM-oriented locations and are made for UTV owners who want an integrated speaker upgrade.\u003c\/p\u003e\u003cp\u003eEach pod set is rated for 75 watts RMS, 150 watts peak power, and 90 dB sensitivity. These specifications support clear, useful output in an open-cabin powersports environment when matched with an appropriate audio system. The integrated full-range speaker format keeps the upgrade focused on front-stage sound.\u003c\/p\u003e\u003cp\u003eRGB lighting is built into the speaker area, Memphis logo, and downward-facing floor lighting. This lets the pods add visible accent lighting along with audio capability. Lighting integration is built into the enclosure design rather than requiring separate light pods.\u003c\/p\u003e\u003cp\u003eThe CANAMX365FE uses injection-molded polypropylene front enclosures with sealed connectors. The pods carry an IPX6 rating for water exposure and are built with marine-grade components for powersports use. This construction is intended for the vibration, dust, and weather conditions associated with off-road riding.\u003c\/p\u003e\u003cp\u003eThese front pods can serve as the starting point for a Maverick X3 audio system or as part of a larger front-and-rear speaker setup. Vehicle-specific mounting hardware is included, and the design is compatible with plug-and-play harnessing. A separate source unit, amplifier, and any required vehicle wiring should be selected to suit the intended system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Fit Maverick X3 Design:\u003c\/strong\u003e Made for 2017 and newer Can-Am Maverick X3 models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Front Speakers:\u003c\/strong\u003e Adds a pair of full-range front speaker pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching for dependable everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX6-Rated Pods:\u003c\/strong\u003e Helps suit the enclosures to exposed powersports conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Illuminates the speakers, logo, and down-lighting area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Connections:\u003c\/strong\u003e Uses sealed connectors and plug-and-play-harness compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe front enclosures are injection molded from polypropylene and use a vehicle-specific form for the Can-Am Maverick X3. Their sealed connectors and IPX6-rated pod construction are intended for outdoor powersports use. Integrated RGB speaker, logo, and floor lighting is incorporated into the pod assembly.\u003c\/p\u003e\u003cp\u003eInstallation uses the supplied templates, brackets, screws, and washers to mount the pods in the vehicle-specific front locations. The installation procedure requires removal of exterior panels and drilling mounting and speaker-wire holes as directed by the supplied templates. For a complete system, connect the pods through compatible wiring to an appropriately configured audio source and amplification setup.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171521606,"sku":"CANAMX365FE","price":299.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61YYwAMEWmL.jpg?v=1784408474"},{"product_id":"memphis-canamx3ampbk-can-am-maverick-x3-amplifier-bracket","title":"Memphis CANAMX3AMPBK Can-Am Maverick X3 Amplifier Bracket","description":"\u003cp\u003eThe Memphis CANAMX3AMPBK is an aluminum amplifier mounting bracket made for adding select Memphis audio components to a compatible Can-Am Maverick X3. It provides a dedicated location for supported equipment instead of requiring a custom-fabricated mounting solution. The bracket is intended for 2017 and newer Can-Am X3 vehicles.\u003c\/p\u003e\u003cp\u003eThis accessory is designed for Maverick X3 owners building or expanding a powersports audio system. It bolts to factory mounting locations, helping position compatible equipment within an OEM-location installation layout. That approach can simplify planning when using the specified Memphis components.\u003c\/p\u003e\u003cp\u003eAs a mounting accessory, the CANAMX3AMPBK does not process or amplify audio itself. Its role is to securely support compatible components that handle amplification or source duties in the system. Audio performance will depend on the amplifier, radio, speakers, wiring, tuning, and installation used with the bracket.\u003c\/p\u003e\u003cp\u003eThe plate includes dedicated mounting provisions for Memphis MX400.4 and MX800.4 amplifiers. It also accommodates the Memphis SMC2A hideaway radio unit. This component-specific layout helps align the bracket with the listed Memphis equipment.\u003c\/p\u003e\u003cp\u003eThe CANAMX3AMPBK can be used as part of a focused Can-Am X3 audio upgrade path. It is suited to installations that need a structured mounting point for a supported amplifier or hideaway radio. Confirm the vehicle year and the intended Memphis component model before purchase and installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Mounting Plate:\u003c\/strong\u003e Provides a purpose-built platform for supported Memphis audio components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCan-Am X3 Fitment:\u003c\/strong\u003e Designed for 2017 and newer Can-Am X3 vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Mounting Location:\u003c\/strong\u003e Bolts to factory mounting locations on compatible vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX400.4 Support:\u003c\/strong\u003e Includes a specific mounting location for the Memphis MX400.4 amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX800.4 Support:\u003c\/strong\u003e Includes a specific mounting location for the Memphis MX800.4 amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMC2A Support:\u003c\/strong\u003e Provides a mounting location for the Memphis SMC2A hideaway radio.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CANAMX3AMPBK uses an aluminum plate design for a dedicated vehicle-specific equipment mount. Its layout is intended around factory mounting points and the mounting patterns of the listed Memphis components. It is an accessory bracket rather than an amplifier, radio, or wiring kit.\u003c\/p\u003e\u003cp\u003eFor installation, verify that the vehicle is a 2017 or newer Can-Am X3 and select one of the supported Memphis components. Mount the bracket at the applicable factory location, then follow the installation instructions supplied with the amplifier or hideaway radio for power, signal, speaker, and control wiring. Package contents and hardware details are not specified in the confirmed product information, so verify what is included before beginning the install.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171587142,"sku":"CANAMX3AMPBK","price":29.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61CpPfWQOCL.jpg?v=1784408506"},{"product_id":"memphis-dblockpgm-marine-fused-power-ground-distribution-block","title":"Memphis DBLOCKPGM Marine Fused Power\/Ground Distribution Block","description":"\u003cp\u003eThe Memphis DBLOCKPGM is a marine-grade power and ground distribution block designed to organize accessory wiring in boats, powersports vehicles, and other 12-volt systems. It provides a centralized point for splitting protected power and ground connections instead of stacking multiple wires at a battery or amplifier terminal. Its sealed design helps keep wiring organized where water exposure and vibration are part of the installation environment.\u003c\/p\u003e\u003cp\u003eThis block is intended for installers adding amplifiers, LED lighting, electronic coolers, navigation equipment, and other compatible accessories. Primary distribution terminals support larger-gauge wiring for main power and ground runs, while secondary ring-terminal outputs serve smaller accessory circuits. The layout makes it easier to build a cleaner multi-accessory electrical system from a single hub.\u003c\/p\u003e\u003cp\u003eThe DBLOCKPGM does not process audio or change the sound character of a system; its role is to support dependable power and ground distribution for audio and accessory equipment. Fused positive-output provisions add circuit protection at the distribution point. Separate positive and negative connection sections help simplify routing and service work when expanding a system.\u003c\/p\u003e\u003cp\u003eMemphis uses IPX5 marine-grade construction and water-resistant gaskets to help limit water intrusion at the terminals. A high-temperature transparent protective cover shields the connection area while allowing visual access to the wiring and fuse locations. Sturdy screw-in terminals provide a secure connection method for the supported wire sizes.\u003c\/p\u003e\u003cp\u003eFor system upgrades, the DBLOCKPGM can serve as the distribution center between a main power run and multiple downstream accessories. It combines large-wire primary distribution with smaller secondary ATC-fused and ground outputs for ring-terminal wiring. An extra ATC fuse-holder location and a stowable Torx wrench add practical flexibility for installation and future accessory expansion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine-Grade Construction:\u003c\/strong\u003e Supports use in water-exposed marine and powersports electrical systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Power Distribution:\u003c\/strong\u003e Splits larger power wiring into two sealed AFS-fused outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Ground Distribution:\u003c\/strong\u003e Provides two sealed ground outputs for larger accessory connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary ATC Outputs:\u003c\/strong\u003e Adds four individually sealed fused positive accessory circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransparent Protective Cover:\u003c\/strong\u003e Helps protect terminals while keeping connections visible for inspection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Torx Wrench Storage:\u003c\/strong\u003e Keeps the included terminal tool conveniently stored inside the cover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DBLOCKPGM uses a compact distribution-block format with screw-in terminals, water-resistant terminal gaskets, and a high-temperature transparent protective cover. Its marine-grade IPX5 construction is designed for installations that may encounter spray or wet conditions. The cover encloses the connection area while retaining access to the stored Torx wrench.\u003c\/p\u003e\u003cp\u003eUse the primary 0\/4-gauge connections for main power and ground distribution, then connect suitable downstream wiring to the sealed 4\/8-gauge outputs or secondary ring-terminal outputs. The four secondary positive outputs use ATC fusing, while the secondary ground outputs accept individually sealed ring-terminal connections up to 14 gauge. Select appropriate wire, terminals, fuses, mounting location, and circuit protection for each connected accessory.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171652678,"sku":"DBLOCKPGM","price":69.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/41yGeQg9LLL.jpg?v=1784408541"},{"product_id":"memphis-eql7-7-band-half-din-graphic-equalizer","title":"Memphis EQL7 7-Band Half-DIN Graphic Equalizer","description":"\u003cp\u003eThe Memphis EQL7 is a half-DIN, 7-band graphic equalizer and preamp designed to give a car audio system more direct tonal and level control. It fits between a source unit and amplifiers to help correct for vehicle acoustics, speaker placement, or personal listening preferences. This used, very-good-condition unit is suited to systems that use RCA-level signal connections.\u003c\/p\u003e\u003cp\u003eIts seven EQ controls cover bass, midrange, and treble frequencies from 50Hz through 16kHz. Each band provides up to 18dB of boost or cut, allowing targeted adjustments instead of relying solely on a head unit's basic tone controls. The result is a more configurable signal before it reaches the amplifiers.\u003c\/p\u003e\u003cp\u003eThe EQL7 combines equalization with master volume, fader, input selection, and subwoofer-level controls on its front panel. Separate left and right sensitivity adjustments for the main and auxiliary inputs help match the processor to connected source equipment. An adjustable subwoofer-frequency control adds another point of system tuning for installations with a dedicated subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eMemphis specifies a low-noise BI-FET op-amp design and an onboard 30V bipolar switching power supply. The unit is rated for a maximum output of 9.75V RMS, with 20dB of headroom to help accommodate strong source signals. Its specified frequency response is 10Hz to 50kHz within +\/-1dB.\u003c\/p\u003e\u003cp\u003eWith its universal half-DIN chassis, the EQL7 is intended for custom dashboards, center consoles, or other accessible mounting locations. It is a signal processor rather than an amplifier, so it requires a compatible 11-15V negative-ground electrical system and RCA-connected downstream equipment. It can be used as a central control point in a multi-amplifier system with front, rear, and subwoofer channels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven-Band Equalization:\u003c\/strong\u003e Adjusts 50Hz, 125Hz, 315Hz, 750Hz, 2.2kHz, 6kHz, and 16kHz bands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e18dB Boost\/Cut:\u003c\/strong\u003e Provides substantial adjustment range for each equalizer band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain\/Aux Input Selection:\u003c\/strong\u003e Lets you select between main and auxiliary signal inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent Input Sensitivity:\u003c\/strong\u003e Left and right controls help match connected source signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Level Control:\u003c\/strong\u003e Provides front-panel adjustment of subwoofer output level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Voltage Preamp Stage:\u003c\/strong\u003e Delivers up to 9.75V RMS maximum output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EQL7 uses a universal half-DIN chassis, gold RCA input\/output jacks, and dual-color backlighting for control visibility. Its low-noise BI-FET op-amp circuit and onboard 30V bipolar switching supply are intended to support a clean preamp signal path. The unit is specified for 11-15V negative-ground electrical systems.\u003c\/p\u003e\u003cp\u003eInstall the equalizer in an accessible half-DIN opening or custom panel location, then connect it between the source unit and amplifier inputs using RCA cables. Begin setup with EQ controls set flat and input gains at minimum, then match levels gradually to avoid audible distortion. Verify the included hardware and accessories for this used unit before installation, as package contents can vary by individual listing.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171750982,"sku":"EQL7","price":119.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71EzIlgMTFL.jpg?v=1784408576"},{"product_id":"memphis-fdbrontg10pro-10-6-5-4-bronco-swing-gate-box","title":"Memphis FDBRONTG10PRO 10\", 6.5\" \u0026 4\" Bronco Swing Gate Box","description":"\u003cp\u003eThe Memphis FDBRONTG10PRO is an unloaded, vehicle-specific full-range audio enclosure made for modern Ford Bronco swing gates. It provides dedicated mounting locations for a 10-inch subwoofer, two 6.5-inch pro audio mids, and two 4-inch pro audio tweeters. This lets Bronco owners build a rear-mounted system without using a conventional cargo-area subwoofer box.\u003c\/p\u003e\u003cp\u003eThe enclosure is intended for shoppers who want to select and install their own compatible speakers, subwoofer, amplification, and system wiring. Because it is sold without drivers, it gives the installer flexibility to match the system to preferred power handling, tuning, and listening goals. Memphis identifies the MM1024 subwoofer, SRXP62V mids, and SRXPTV tweeters as recommended components.\u003c\/p\u003e\u003cp\u003eIts full-range layout combines dedicated locations for bass, midrange, and high-frequency drivers in one swing-gate-mounted enclosure. The arrangement can support sound reproduction inside the Bronco cabin and when the swing gate is open. Speaker terminals and integrated RGB LED connectors are built into the enclosure to help organize the installation.\u003c\/p\u003e\u003cp\u003eThe FDBRONTG10PRO is designed specifically for modern Ford Bronco swing gates and uses a space-saving mounting approach. Included hardware supports a direct OEM-style fit rather than a universal box installation. Confirm vehicle fitment and component mounting dimensions before purchasing speakers or beginning installation.\u003c\/p\u003e\u003cp\u003eA durable bedliner exterior gives the enclosure a rugged finish suitable for a Bronco-focused installation. Custom-cut Memphis branding adds a finished appearance while retaining the enclosure's vehicle-specific character. It is a practical foundation for a custom amplified pro-audio upgrade, but speakers, subwoofer, amplifiers, wiring, and LED control equipment are separate purchases.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Range Driver Locations:\u003c\/strong\u003e Holds one 10-inch subwoofer, two 6.5-inch mids, and two 4-inch tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-Gate Mounting:\u003c\/strong\u003e Uses a space-saving design intended for the Ford Bronco swing gate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnloaded Configuration:\u003c\/strong\u003e Lets you choose compatible speakers and subwoofer separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Connections:\u003c\/strong\u003e Includes speaker terminals and integrated RGB LED connectors for cleaner wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Hardware:\u003c\/strong\u003e Includes mounting hardware for the intended direct-fit installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged Exterior:\u003c\/strong\u003e Durable bedliner finish and custom-cut Memphis branding complete the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure has a durable bedliner exterior and custom-cut Memphis branding. Its vehicle-specific swing-gate format is designed to conserve interior space while providing separate mounting locations for a subwoofer, mids, and tweeters. The product is supplied as an empty enclosure, with no speakers or subwoofer installed.\u003c\/p\u003e\u003cp\u003eMount the enclosure only on a compatible modern Ford Bronco swing gate using the included hardware. Select drivers that fit the designated 10-inch, 6.5-inch, and 4-inch locations, then plan amplifier channels, crossover settings, power wiring, speaker wiring, and RGB lighting control for the components you choose. Professional installation is recommended for component selection, secure mounting, and safe wiring integration.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171849286,"sku":"FDBRONTG10PRO","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51iIEJBfRxL.jpg?v=1784408615"},{"product_id":"memphis-fdbrontg12-12-ford-bronco-tailgate-subwoofer-enclosure","title":"Memphis FDBRONTG12 12\" Ford Bronco Tailgate Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis FDBRONTG12 is a vehicle-specific, unloaded enclosure designed to add a single 12-inch subwoofer to the swing gate of a Ford Bronco. It gives Bronco owners a dedicated bass location without using conventional cargo-area enclosure space. The enclosure is intended for a clean, integrated installation while allowing the swing gate to remain functional.\u003c\/p\u003e\u003cp\u003eThis enclosure is for listeners building a custom Bronco audio system who want to select their own compatible 12-inch subwoofer and amplification. Because it is sold without a subwoofer, its final bass output and power handling depend on the driver and amplifier chosen. Memphis specifically designs the cutout around its MM1224 12-inch subwoofer, which is sold separately.\u003c\/p\u003e\u003cp\u003eThe FDBRONTG12 uses a sealed enclosure format, supporting controlled low-frequency performance based on the installed subwoofer. Its swing-gate location keeps the driver mounted at the rear of the vehicle while preserving available interior room. This makes it a practical foundation for a bass upgrade in a vehicle used for daily driving, travel, or off-road recreation.\u003c\/p\u003e\u003cp\u003eA durable black bedliner-style exterior gives the enclosure a rugged finish suited to the Bronco environment. Custom-cut Memphis branding provides a finished appearance without changing the enclosure's vehicle-specific purpose. Integrated speaker terminals and RGB LED connectors help keep subwoofer and lighting connections organized during installation.\u003c\/p\u003e\u003cp\u003eThe enclosure mounts directly to the Bronco swing gate and includes hardware for an OEM-style fit. It can be paired with a compatible 12-inch subwoofer, an appropriately matched mono amplifier, and the required power, ground, signal, and speaker wiring. Confirm vehicle fitment and subwoofer mounting compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-Inch Cutout:\u003c\/strong\u003e Accommodates one compatible 12-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwing-Gate Mounting:\u003c\/strong\u003e Uses the Bronco tailgate area to conserve cabin space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Provides a dedicated sealed subwoofer mounting platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBedliner Exterior:\u003c\/strong\u003e Adds a durable, rugged black exterior finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Connections:\u003c\/strong\u003e Includes speaker terminals and RGB LED connectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Hardware:\u003c\/strong\u003e Mounting hardware is included for vehicle-specific installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe FDBRONTG12 is a vehicle-specific enclosure with a round 12-inch subwoofer opening, black sprayliner\/bedliner-style finish, and custom-cut Memphis branding. Its design mounts to the Bronco swing gate rather than occupying the main cargo floor. The enclosure is sold unloaded, so it does not include a subwoofer or amplifier.\u003c\/p\u003e\u003cp\u003eInstall the enclosure using the included mounting hardware and verify that the selected 12-inch subwoofer fits the cutout and enclosure before final assembly. Connect the chosen subwoofer to the integrated terminals, and connect RGB lighting only if the installed subwoofer supports it and the system includes compatible lighting wiring. Use an amplifier matched to the installed subwoofer's manufacturer power and impedance requirements, and verify swing-gate operation after installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633171882054,"sku":"FDBRONTG12","price":249.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/913UAVkThIL.jpg?v=1784408651"},{"product_id":"memphis-genrrspbrk-rear-speaker-brackets-for-polaris-general","title":"Memphis GENRRSPBRK Rear Speaker Brackets for Polaris General","description":"\u003cp\u003eThe Memphis GENRRSPBRK is a vehicle-specific rear speaker bracket solution for compatible side-by-side audio installations. It is designed to create a rear mounting location for Memphis MXA62PS Powersports speaker pods. This accessory helps add rear audio coverage to a Polaris General or other listed compatible utility vehicle.\u003c\/p\u003e\u003cp\u003eThis bracket is intended for riders building a custom powersports sound system or expanding an applicable Memphis direct-fit kit. It works with the original MXA62PS mounting bracket rather than replacing the speaker pod itself. The GENRRSPBRK provides an installation-focused solution where a standard clamp location is not the preferred fit.\u003c\/p\u003e\u003cp\u003eBecause it is a mounting accessory, the GENRRSPBRK does not add amplifier power, audio processing, or speakers to the system. Its contribution is mechanical placement for compatible MXA62PS pods. Sound output and system performance depend on the speakers, amplification, source unit, and wiring used with it.\u003c\/p\u003e\u003cp\u003eThe bracket is designed around the vehicle cage mounting application and the MXA62PS pod mounting arrangement. Installation uses the existing MXA62PS bracket assembly, with the upper portion of that original bracket removed and replaced by the GENRRSPBRK. Included screws are used to secure the bracket to the machine.\u003c\/p\u003e\u003cp\u003eThe GENRRSPBRK can be purchased for a custom MXA62PS installation and is also supplied with applicable Memphis four-speaker direct-fit kits. It is listed for Polaris General and Polaris Ranger applications, with Memphis catalog information also identifying Can-Am Defender compatibility. Pair it with MXA62PS speaker pods and the appropriate vehicle-specific wiring and audio components for a complete rear-speaker upgrade path.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMXA62PS Compatibility:\u003c\/strong\u003e Designed specifically to work with Memphis MXA62PS Powersports speaker pods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Speaker Mounting:\u003c\/strong\u003e Creates a rear mounting solution for compatible side-by-side audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Application:\u003c\/strong\u003e Listed for Polaris General and Polaris Ranger vehicle applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefender Compatibility:\u003c\/strong\u003e Memphis catalog information also lists Can-Am Defender compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOriginal Bracket Integration:\u003c\/strong\u003e Works in conjunction with the original MXA62PS mounting bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Screws:\u003c\/strong\u003e Uses included screws to secure the bracket to the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GENRRSPBRK is a purpose-built powersports mounting accessory rather than a speaker, amplifier, or source unit. Its design is dedicated to positioning an MXA62PS rear speaker pod in the intended vehicle application. It is also used as part of applicable Memphis four-speaker direct-fit kits.\u003c\/p\u003e\u003cp\u003eFor installation, remove the top half of the original MXA62PS mounting bracket and replace it with the GENRRSPBRK bracket section. Secure the assembly to the machine with the included screws, then complete the speaker and system wiring separately. Confirm vehicle fitment, speaker-pod compatibility, and clearance before installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633172078662,"sku":"GENRRSPBRK","price":14.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UKwsnAQuL.jpg?v=1784408690"},{"product_id":"memphis-ll2be-2-channel-line-output-converter","title":"Memphis LL2BE 2-Channel Line Output Converter","description":"\u003cp\u003eThe Memphis LL2BE is a 2-channel line output converter designed to integrate aftermarket amplification with many factory-installed audio systems. It accepts amplified speaker-level signals and converts them into preamp-level outputs for external amplifiers. This makes it a practical option when retaining the original factory radio is preferred.\u003c\/p\u003e\u003cp\u003eIts digital bass restoration circuitry is intended to address the bass reduction that can occur in some factory systems as volume increases. The adjustable bass restoration and expansion controls allow the installer to tune the added bass compensation for the vehicle and system. A dedicated bass output supports a subwoofer amplifier, while the main output can feed a full-range amplifier.\u003c\/p\u003e\u003cp\u003eThe LL2BE uses two active speaker-level inputs rated to accept up to 400 watts per channel at 4 ohms. Its maximum preamp output is rated at 9.8 Vrms, providing a strong signal for compatible aftermarket amplifiers. The unit also includes level-matching controls to help set appropriate signal levels during installation.\u003c\/p\u003e\u003cp\u003eFor convenient integration, the converter features signal-sense turn-on capability and a 12-volt trigger output for connected amplifiers. This can reduce the need to locate a separate remote-turn-on lead in compatible installations. A selectable turn-on function is provided to support setup with factory audio systems.\u003c\/p\u003e\u003cp\u003eThe compact LL2BE is suited to factory-radio upgrade paths that add a subwoofer amplifier, a full-range amplifier, or both. Its separate main and bass outputs support single-amplifier and multi-amplifier system layouts. An included remote level control provides accessible adjustment of the bass output after installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Active Inputs:\u003c\/strong\u003e Accepts speaker-level signals from factory radios or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Helps compensate for factory bass roll-off at higher volume.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMain And Bass Outputs:\u003c\/strong\u003e Supports full-range and subwoofer amplifier connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Input Capacity:\u003c\/strong\u003e Handles up to 400 watts per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sense Turn-On:\u003c\/strong\u003e Activates with the factory audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Level Control:\u003c\/strong\u003e Allows convenient adjustment of bass-output level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe LL2BE uses a compact chassis measuring 3.3 inches wide, 1.4 inches high, and 5 inches long, with a 6.125-inch overall length including its mounting provisions. Its control layout includes bass enhancement adjustment, bass-enhancement threshold adjustment, input and output connections, a turn-on selector, and a remote-control port. This compact format helps it fit behind trim panels, under seats, or near an amplifier when sufficient ventilation and secure mounting are provided.\u003c\/p\u003e\u003cp\u003eInstallation requires connection to power, ground, and the factory system's speaker-level signal. Connect the main output to a full-range amplifier when used, and connect the bass output to a subwoofer amplifier; the 12-volt trigger output can be used to activate connected amplifiers. For bass-restoration setup, Memphis directs installers to identify the factory system's bass drop-off point, adjust the threshold until bass returns, and then fine-tune the enhancement level to suit the system.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633172209734,"sku":"LL2BE","price":102.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/810HM8dR_EL.jpg?v=1784408739"},{"product_id":"memphis-ll2l-2-channel-line-output-converter","title":"Memphis LL2L 2-Channel Line Output Converter","description":"\u003cp\u003eThe Memphis LL2L is a 2-channel line output converter designed to add preamp-level RCA outputs to a factory or aftermarket car audio system. It provides an interface for sending audio signal from speaker-level wiring to an external amplifier. This makes it a practical component for upgrades that retain the original radio.\u003c\/p\u003e\u003cp\u003eBuilt for OEM-system integration, the LL2L supports OEM load detection to help maintain the load expected by compatible factory audio systems. Its differential balanced inputs and low-impedance outputs are designed for stable signal transfer. The result is a converter focused on clean signal routing between the source unit and amplifier.\u003c\/p\u003e\u003cp\u003eVariable gain adjustment allows the output level to be matched to the connected amplifier. An integrated LED clip indicator helps identify when the signal level is approaching clipping during setup. This gives installers a visual reference when setting the converter's output.\u003c\/p\u003e\u003cp\u003eThe LL2L includes selectable DC-offset and audio-detect turn-on options for systems without a conventional amplifier remote lead. It also generates a +12V remote output for activating a connected amplifier. These functions can simplify integration with compatible factory radios.\u003c\/p\u003e\u003cp\u003eIts compact aluminum chassis is intended for installations where available space is limited. Locking detachable power and speaker terminals help keep wiring secure, while panel-mount RCA jacks provide a fixed connection point for signal cables. With up to 11V of preout voltage, the LL2L is suited to two-channel amplifier integration or as a signal source for an expanded audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Conversion:\u003c\/strong\u003e Provides two channels of line-level output for amplifier integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Load Detection:\u003c\/strong\u003e Supports compatible factory systems that require load detection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifferential Balanced Inputs:\u003c\/strong\u003e Designed to accept balanced speaker-level input signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Gain Control:\u003c\/strong\u003e Allows output level adjustment to match the connected amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Clip Indicator:\u003c\/strong\u003e Gives a visual reference while setting signal level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Turn-On:\u003c\/strong\u003e Offers DC-offset or audio-detect activation with generated +12V remote output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe LL2L uses a compact aluminum chassis with locking detachable power and speaker terminals. Its panel-mount RCA jacks are designed to provide a secure, fixed signal connection. The compact enclosure measures 2.76 inches wide, 2.85 inches long, and 1.10 inches high.\u003c\/p\u003e\u003cp\u003eInstall the converter between compatible speaker-level source wiring and the RCA inputs of an external amplifier. Select the appropriate DC-offset or audio-detect turn-on method for the vehicle, then use the variable gain and LED clip indicator during level setup. The generated +12V remote output can be used to trigger a compatible amplifier.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633172242502,"sku":"LL2L","price":49.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71i83Swkh2L.jpg?v=1784408771"},{"product_id":"memphis-ll6bxl-6-channel-line-output-converter","title":"Memphis LL6BXL 6-Channel Line Output Converter","description":"\u003cp\u003eThe Memphis LL6BXL is a six-channel line output converter designed to integrate aftermarket amplifiers with a vehicle’s factory audio system. It accepts speaker-level signals and provides adjustable line-level output for an expanded audio system. This makes it a practical interface when retaining the original radio is preferred or required.\u003c\/p\u003e\u003cp\u003eIts six active speaker-level input channels are rated to handle up to 40V, supporting connection to a range of factory-amplified audio systems. Discrete output-level controls allow the installer to set signal levels during system tuning. The design is intended for multi-channel upgrades involving front, rear, and subwoofer amplification.\u003c\/p\u003e\u003cp\u003eThe LL6BXL includes bass-enhancer processing to help correct factory bass roll-off. This can be useful when a factory system reduces low-frequency output as volume rises. Internal channel summing further supports integration with factory systems that divide audio signals across multiple channels.\u003c\/p\u003e\u003cp\u003eA selectable load switch helps the converter work with factory systems that monitor speaker loads. Audio-sense turn-on can activate connected equipment when an audio signal is detected, while the ground-isolation switch provides an installation option for addressing system noise. These functions give an installer multiple setup choices without replacing the factory source unit.\u003c\/p\u003e\u003cp\u003eWith up to 11.2V maximum output, the LL6BXL is built to provide a strong signal to compatible aftermarket amplifiers or processors. An RG9 wired remote is included for convenient adjustment. It fits into an OEM-retention upgrade path where the factory radio stays in place while the amplification and speakers are upgraded separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix Active Inputs:\u003c\/strong\u003e Accepts six speaker-level channels for multi-channel factory-system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40V Input Handling:\u003c\/strong\u003e Supports high-voltage speaker-level signals from compatible factory amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Enhancer:\u003c\/strong\u003e Helps correct bass roll-off from factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Summing:\u003c\/strong\u003e Combines channels internally when a factory signal is split.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Load:\u003c\/strong\u003e Provides load-selection flexibility for OEM audio-system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRG9 Wired Remote:\u003c\/strong\u003e Includes a remote for convenient system adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe LL6BXL uses an active six-channel conversion design with discrete level controls, internal summing, bass-enhancer processing, and switch-selectable integration functions. Memphis does not publish an enclosure-material specification for this model. Its layout is focused on providing signal conversion and adjustment functions for an aftermarket amplifier installation.\u003c\/p\u003e\u003cp\u003eInstallation involves connecting the converter to appropriate factory speaker-level signals, providing the required vehicle power and ground connections, and routing its line-level outputs to compatible amplifiers or processors. Set the load-selection and ground-isolation switches according to the vehicle and installation requirements, then adjust output levels as part of system tuning. Professional installation is recommended when working with amplified, factory-processed, or complex OEM audio systems.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633172340806,"sku":"LL6BXL","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61feqxZkDfL.jpg?v=1784408814"},{"product_id":"memphis-mb1024-10-selectable-impedance-subwoofer","title":"Memphis MB1024 10\" Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis MB1024 is a 10-inch car audio subwoofer designed for systems that need meaningful low-frequency output while retaining installation flexibility. Its selectable impedance design allows the same subwoofer to be configured for either 2-ohm or 4-ohm operation. This makes it a practical choice for replacing an existing woofer or planning a system around a compatible mono amplifier.\u003c\/p\u003e\u003cp\u003eWith a 500-watt RMS power rating and 1,000-watt peak rating, the MB1024 is intended for a properly matched amplified subwoofer system. It is suited to listeners who want fuller bass response than factory speakers can provide. The 10-inch format can fit where larger subwoofers may not be practical, provided enclosure and mounting-clearance requirements are met.\u003c\/p\u003e\u003cp\u003eMemphis FLEX selectable impedance technology is the defining feature of this model. It gives installers the option to configure the subwoofer for 2-ohm or 4-ohm use, helping align the woofer with an amplifier's stable operating load. Sensitivity is rated at 84.6 dB in the 2-ohm configuration and 85.3 dB in the 4-ohm configuration.\u003c\/p\u003e\u003cp\u003eThe MB1024 uses an ultra-light aluminum voice coil, a 2-inch four-layer triple voice coil design, and DVVC direct vented voice coil cooling. These elements support power handling and help manage heat during operation. Woven tinsel leads and a polypropylene dust cap complete the working assembly.\u003c\/p\u003e\u003cp\u003eA double-stitched V-Groove folded surround is used to support increased excursion while preserving effective cone area. Memphis provides sealed and vented enclosure recommendations for single- and dual-subwoofer applications. Pair the MB1024 with a suitable enclosure, correctly configured amplifier, and appropriately sized wiring for a focused bass upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose 2-ohm or 4-ohm operation to suit a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports properly matched amplified bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Provides a compact format for vehicle subwoofer installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Voice Coil:\u003c\/strong\u003e Supports sensitivity and output with low moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct venting helps manage voice-coil heat during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFolded V-Groove Surround:\u003c\/strong\u003e Supports excursion while retaining effective surface area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MB1024 combines a polypropylene dust cap, woven tinsel leads, ultra-light aluminum voice coil, and double-stitched V-Groove folded surround. Its 2-inch, four-layer triple voice coil and 60-ounce magnet are matched with DVVC direct vented voice coil cooling. The subwoofer has a 10.16-inch outside frame diameter, a 9.17-inch cutout requirement, and a 5.14-inch mounting depth.\u003c\/p\u003e\u003cp\u003eConfirm that the enclosure has at least the required cutout diameter and mounting depth before installation. Memphis recommends a 1.0-cubic-foot sealed enclosure for one subwoofer or a 1.5-cubic-foot gross vented enclosure tuned to 38 Hz; dual-subwoofer recommendations are also available. Configure the selectable impedance setting to match an amplifier that is designed to operate safely at the chosen load.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633172504646,"sku":"MB1024","price":198.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/MB10-7_1000.jpg?v=1784408853"},{"product_id":"memphis-audio-mbe8d12-dual-8-ported-subwoofer-enclosure","title":"Memphis Audio MBE8D12 Dual 8\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis Audio MBE8D12 is a loaded ported subwoofer enclosure with two 8-inch MB Series subwoofers. It provides a compact way to add dedicated low-frequency output to a car-audio system without designing and building a separate enclosure. Its narrow 6.3-inch depth can suit installations where space is limited.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners who want a ready-to-install bass foundation while retaining flexibility in amplifier selection. Memphis FLEX Technology allows the system impedance to be configured for either 1 ohm or 2 ohms. This gives installers a choice when matching the enclosure to a compatible mono amplifier.\u003c\/p\u003e\u003cp\u003eThe MBE8D12 is rated for 700 watts RMS and 1,400 watts peak power handling. Its specified sensitivity is 84. The side-loaded port is part of the enclosure design and is intended to support strong bass output from the dual 8-inch configuration.\u003c\/p\u003e\u003cp\u003eMemphis builds the enclosure from 100% MDF and finishes it in custom stitched carpet. A high-current, nickel-plated compression terminal provides the speaker connection point. These details support a clean, purpose-built installation rather than an exposed component-subwoofer setup.\u003c\/p\u003e\u003cp\u003eFor an under-seat or down-firing application, the included rubber feet can be fitted to the 8-inch enclosure. The loaded design means the subwoofers and enclosure are already matched as a single assembly. Add a compatible amplifier, appropriate wiring, and a properly configured signal path to complete the system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch MB Subwoofers:\u003c\/strong\u003e Delivers a complete dual-subwoofer bass enclosure in one package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Technology:\u003c\/strong\u003e Selects between 1-ohm and 2-ohm system impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700-Watt RMS Rating:\u003c\/strong\u003e Supports amplifier matching using continuous-power guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Loaded Port:\u003c\/strong\u003e Uses a ported enclosure layout for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% MDF Enclosure:\u003c\/strong\u003e Provides a rigid cabinet material for the loaded system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Rubber Feet:\u003c\/strong\u003e Supports optional down-firing placement on 8-inch models.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MBE8D12 uses a 100% MDF enclosure with a side-loaded port, custom stitched carpet exterior, and a high-current nickel-plated compression terminal. It measures 20 inches long, 14 inches high, and 6.3 inches deep, with a 6.3-inch bottom depth. The compact dual-8-inch format is designed as a finished loaded enclosure rather than a bare box.\u003c\/p\u003e\u003cp\u003eMeasure the intended mounting space before installation, including clearance for the side port and wiring at the terminal. Choose the 1-ohm or 2-ohm FLEX configuration only with an amplifier designed to operate at that load, and set amplifier gain appropriately for the enclosure's 700-watt RMS rating. The included rubber feet may be installed when using the enclosure in a down-firing application.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633173651526,"sku":"MBE8D12","price":244.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71B3UVbOlZL.jpg?v=1784408896"},{"product_id":"memphis-membx-digital-bass-expander","title":"Memphis MEMBX Digital Bass Expander","description":"\u003cp\u003eThe Memphis MEMBX is a digital bass expander designed to restore low-frequency impact that can be reduced in compressed music playback. It processes the incoming audio signal before it reaches the next component in the system. The result is adjustable bass restoration for vehicles using compatible aftermarket or factory audio equipment.\u003c\/p\u003e\u003cp\u003eThis processor is intended for listeners who want more control over bass character without replacing their entire sound system. Its high- and low-level input capability supports integration with a range of source units. RCA outputs send the processed signal onward to an amplifier, equalizer, or crossover.\u003c\/p\u003e\u003cp\u003eThe MEMBX uses a bass driver circuit to recreate and inject low-frequency information into the signal path. A bass equalization circuit then contours the restored bass for the connected speaker system. Variable Sweep and Wide controls let the installer select the center frequency and the affected frequency range.\u003c\/p\u003e\u003cp\u003eA wired, mountable remote is included for adjusting bass level from the listening position. The remote includes a subsonic-filter control and bass-level control, while its LED brightness changes with the selected bass level. On the main unit, Bass Maximizer indicators flash when the maximization circuit is active.\u003c\/p\u003e\u003cp\u003eThe MEMBX is designed as an in-line signal processor and should be placed before a crossover when one is used. Its balanced input circuit, grounding options, and ground-isolation jumpers support clean integration in a variety of vehicle audio systems. Internal bass-output jumpers allow the restoration circuit output to be tailored to system requirements.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Reintroduces low-frequency information to the audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Supports factory and aftermarket audio-system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Sweep Control:\u003c\/strong\u003e Selects the bass-restoration center frequency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Wide Control:\u003c\/strong\u003e Adjusts the range of affected frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Provides convenient bass-level adjustment from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Helps reduce unwanted subsonic interference.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MEMBX is a purpose-built signal processor with labeled input, output, remote, power, and adjustment connections. Memphis does not publish a chassis-material specification or overall dimensions in the available documentation. Its design includes external LEDs and controls, along with internal jumpers for input grounding, ground isolation, and bass-output configuration.\u003c\/p\u003e\u003cp\u003eInstall the MEMBX securely in a dry location and connect its RCA outputs to the next signal component, such as an equalizer, crossover, or amplifier. When a crossover is part of the system, install the MEMBX before it in the signal path. Connect B+, ground, and a 12VDC remote-turn-on lead correctly, use the included mountable remote, and set the amplifier gain only after the processor has been adjusted.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633173684294,"sku":"MEMBX","price":114.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61uru7D4c0L.jpg?v=1784408941"},{"product_id":"memphis-mj1512-mojo-15-selectable-impedance-subwoofer","title":"Memphis MJ1512 MOJO 15\" Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis MJ1512 is a 15-inch MOJO-series car audio subwoofer designed for systems that need substantial low-frequency output. It is rated for 2000 watts RMS and 4000 watts peak power handling. Its FLEX selectable-impedance system allows the subwoofer to be configured for either a 1-ohm or 2-ohm load.\u003c\/p\u003e\u003cp\u003eThis model suits enthusiasts building a dedicated bass system with an appropriately matched mono amplifier and custom enclosure. The selectable impedance gives installers flexibility when planning amplifier compatibility and future system changes. It is a component subwoofer, so an enclosure, amplifier, wiring, and installation hardware are required separately.\u003c\/p\u003e\u003cp\u003eThe MJ1512 uses a high-excursion suspension system intended to move significant air while maintaining cone control. Memphis specifies 1 inch of XMAX and up to 1.75 inches of mechanical excursion. Its 86 dB sensitivity rating is listed at both selectable impedance settings.\u003c\/p\u003e\u003cp\u003eA 300-ounce magnet structure and 4-inch aluminum triple voice coil support the subwoofer's high-power design. The vented cast-aluminum basket and DVVC direct vent voice coil cooling system are designed to help manage heat during demanding playback. A reinforced spider suspension helps support controlled cone movement.\u003c\/p\u003e\u003cp\u003eThe MJ1512 is intended for installations with enough room for a large 15-inch driver and a properly designed enclosure. Its 13.81-inch cutout diameter and 9.06-inch mounting depth should be confirmed before building or selecting a box. The included jumper plug is used to choose the 1-ohm or 2-ohm impedance configuration without complex voice-coil wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000W RMS Handling:\u003c\/strong\u003e Supports high-power bass systems when paired with a properly matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose a 1-ohm or 2-ohm load using the included jumper plug.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Aluminum Triple Voice Coil:\u003c\/strong\u003e Provides a substantial thermal platform for high-power operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Ounce Magnet Structure:\u003c\/strong\u003e Supports the motor strength required for a large-excursion subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Surround:\u003c\/strong\u003e Enables 1 inch XMAX and up to 1.75 inches mechanical excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct vent voice coil cooling helps manage heat during extended playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJ1512 combines an orange cast-aluminum basket with a vented basket structure, reinforced spider suspension, and a high-gloss carbon-fiber dust cap. Its 4-inch aluminum triple voice coil and 300-ounce magnet are part of a motor assembly built for its 2000-watt RMS rating. The high-roll surround accommodates the driver's specified long-excursion capability.\u003c\/p\u003e\u003cp\u003ePlan the enclosure around the required 13.81-inch cutout diameter and 9.06-inch mounting depth, while allowing adequate rear clearance and ventilation. Set the included FLEX jumper for either 1 ohm or 2 ohms before connecting the driver to an amplifier compatible with that load. Use an amplifier and enclosure appropriate for the subwoofer's 2000-watt RMS rating, and have the system professionally installed or tuned when needed.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633173946438,"sku":"MJ1512","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81EZrm50cSL.jpg?v=1784408996"},{"product_id":"memphis-mjm612-6-5-mojo-mini-selectable-impedance-subwoofer","title":"Memphis MJM612 6.5\" MOJO Mini Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis MJM612 is a 6.5-inch MOJO Mini component subwoofer designed for car-audio systems that need substantial bass output from a compact driver. Its selectable 1-ohm or 2-ohm configuration helps match the subwoofer to an amplifier and system design. It is intended for custom enclosure installations rather than direct replacement of a factory door speaker.\u003c\/p\u003e\u003cp\u003eWith a 700-watt RMS power rating and 1,400-watt peak rating, the MJM612 is suited to systems built around a properly matched mono amplifier. Its compact diameter can help when available enclosure space is limited, while its 5-inch mounting depth should still be verified before installation. The 6.5-inch format can be used singly or in multi-subwoofer installations.\u003c\/p\u003e\u003cp\u003eMemphis FLEX selectable-impedance technology allows the MJM612 to be configured for either a 1-ohm or 2-ohm load. This provides system-planning flexibility when pairing the subwoofer with an amplifier that is stable at the selected impedance. Confirm amplifier load capability and configure the subwoofer before final wiring.\u003c\/p\u003e\u003cp\u003eThe MJM612 uses a V-Groove stitched foam surround to increase usable cone area and support excursion in its compact frame. A 4-layer copper 1.5-inch voice coil, DVVC direct-vent voice-coil cooling, and an aluminum heat sink are used to manage heat during demanding playback. These construction details support its high-power design.\u003c\/p\u003e\u003cp\u003eA vented cast-aluminum basket provides a rigid mounting structure, while the fiberglass-reinforced dust cap and foam surround complete the moving assembly. Memphis publishes enclosure recommendations for sealed and vented applications, allowing the driver to be used in a compact custom build. Choose the enclosure type, internal volume, port specification, and amplifier setting according to the intended system design.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Configures for a 1-ohm or 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W RMS Power Handling:\u003c\/strong\u003e Supports use with a properly matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct voice-coil venting helps dissipate operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Groove Foam Surround:\u003c\/strong\u003e Supports cone movement in a compact subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Aluminum Basket:\u003c\/strong\u003e Provides a rigid, vented driver frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5-Inch Copper Voice Coil:\u003c\/strong\u003e Uses a four-layer copper winding design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJM612 combines a vented cast-aluminum basket with a fiberglass-reinforced dust cap, stitched foam surround, aluminum heat sink, and 80-ounce magnet. Its 1.5-inch, four-layer copper voice coil uses Memphis DVVC cooling. The driver has a 7.05-inch outside frame diameter, a 5.95-inch cutout requirement, and a 5-inch mounting depth.\u003c\/p\u003e\u003cp\u003eInstall the MJM612 in a properly built sealed or vented enclosure that meets Memphis volume recommendations. A single sealed enclosure is specified at 0.5 cubic feet gross, while a single vented enclosure is specified at 0.8 cubic feet gross and 40 Hz tuning. Select the 1-ohm or 2-ohm configuration only with an amplifier that supports that final load, and set gain conservatively to avoid clipping or distortion.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633176797254,"sku":"MJM612","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81Tu1cP3WtL.jpg?v=1784409338"},{"product_id":"memphis-mjm812-8-mojo-mini-selectable-impedance-subwoofer","title":"Memphis MJM812 8\" MOJO Mini Selectable-Impedance Subwoofer","description":"\u003cp\u003eThe Memphis MJM812 is an 8-inch MOJO Mini component subwoofer designed for vehicle audio systems that need substantial bass output without moving to a larger woofer size. Its compact format helps make it practical for custom enclosures and installations where available space is limited. The subwoofer is intended for use with an external amplifier and a properly designed enclosure.\u003c\/p\u003e\u003cp\u003eMemphis FLEX selectable-impedance technology lets the MJM812 be configured for either a 1-ohm or 2-ohm load. This gives installers flexibility when matching the subwoofer to an amplifier's stable operating impedance. Included jumper wires are used to select the desired load.\u003c\/p\u003e\u003cp\u003eWith a 900-watt RMS and 1,800-watt peak power rating, the MJM812 is built for high-output bass systems using an appropriately matched amplifier. Its 8-inch cone format supports a focused low-frequency upgrade while requiring less enclosure space than many larger subwoofers. The selectable load keeps the same published power handling in either configuration.\u003c\/p\u003e\u003cp\u003eThe design combines a V-Groove rubber surround, reinforced spider, fiberglass-reinforced dust cap, and vented cast-aluminum basket. The folded surround is designed to increase excursion while preserving effective cone area. Direct Vent Voice Coil cooling and an aluminum heat sink help manage heat during sustained operation.\u003c\/p\u003e\u003cp\u003eThe MJM812 can be used in either sealed or ported enclosures, allowing the system to be tailored around available space and listening preferences. Memphis lists a 0.6-cubic-foot sealed enclosure and a 1.0-cubic-foot ported enclosure recommendation for one subwoofer. It is a suitable option for a dedicated compact bass upgrade or for multi-subwoofer systems built around compatible amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose a 1-ohm or 2-ohm load for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900W RMS Handling:\u003c\/strong\u003e Supports high-power mono amplifier applications when properly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Groove Rubber Surround:\u003c\/strong\u003e Supports cone travel while maintaining usable cone area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Vent Voice Coil Cooling:\u003c\/strong\u003e Helps dissipate heat from the voice-coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast Aluminum Basket:\u003c\/strong\u003e Provides a rigid, vented foundation for the moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiberglass-Reinforced Dust Cap:\u003c\/strong\u003e Adds stiffness to the cone assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJM812 uses a vented cast-aluminum basket, 105-ounce magnet structure, aluminum heat sink, reinforced spider, and double-stitched V-Groove rubber surround. Its 2-inch, 4-layer copper voice coil is paired with DVVC cooling to support thermal management. A removable rubber magnet boot is also fitted around the magnet structure.\u003c\/p\u003e\u003cp\u003ePlan for a 7.32-inch cutout diameter and 5.75-inch mounting depth, while verifying clearance in the intended enclosure before cutting. Select the 1-ohm or 2-ohm configuration with the supplied jumper wires only after confirming the amplifier can safely operate at that load. For enclosure design, use the published sealed or ported volume guidance and set amplifier gain and crossover controls carefully to avoid distortion or overdriving the subwoofer.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633177026630,"sku":"MJM812","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/813vZfblKCL.jpg?v=1784409392"},{"product_id":"memphis-mjme6d1tv2-dual-6-5-ported-truck-subwoofer","title":"Memphis MJME6D1TV2 Dual 6.5\" Ported Truck Subwoofer","description":"\u003cp\u003eThe Memphis Audio MJME6D1TV2 is a loaded, ported truck-style subwoofer enclosure with two 6.5-inch MOJO Mini subwoofers. It is designed for adding bass where conventional large enclosures may not fit, especially behind the seat of many single-cab trucks. The enclosure presents one 1-ohm final load at its spring-post input terminals.\u003c\/p\u003e\u003cp\u003eThis model is intended for vehicle owners building a compact bass system without separately selecting and installing an enclosure and pair of woofers. Its thin-profile shape is made for space-limited locations, while the ported cabinet is tuned for strong low-frequency output. The loaded design also simplifies the physical speaker-and-box portion of a subwoofer upgrade.\u003c\/p\u003e\u003cp\u003eWith 1,400 watts RMS and 2,800 watts peak power handling for the complete enclosure, the MJME6D1TV2 is suited to an appropriately matched external amplifier. Its stated frequency response is 48-150 Hz, focusing its role on bass reproduction rather than full-range playback. The two drivers are wired in parallel to provide the enclosure's 1-ohm final impedance.\u003c\/p\u003e\u003cp\u003eMOJO Mini driver construction includes fiberglass-reinforced cones, stitched foam surrounds, vented cast-aluminum baskets, and 4-layer wound copper voice coils. Memphis DVVC Direct Vent Voice Coil Cooling and aluminum heat-sink elements are incorporated to help manage heat during demanding playback. These features support the enclosure's compact, high-power design.\u003c\/p\u003e\u003cp\u003eThe carpet-wrapped cabinet gives the installation a finished appearance while helping protect the enclosure surface from everyday scuffs. Its 36.1-inch width, 14.2-inch height, 3.5-inch top depth, and 7.5-inch bottom depth should be measured against the intended vehicle location before purchase. Use it with a compatible amplifier, suitable power wiring, and a secure mounting plan for a complete bass upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 6.5-Inch MOJO Mini Drivers:\u003c\/strong\u003e Two compact subwoofers share one loaded enclosure for space-conscious bass installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Truck Enclosure:\u003c\/strong\u003e The vented cabinet design is intended for higher-output bass performance in a shallow profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Impedance:\u003c\/strong\u003e The two 2-ohm drivers are factory wired in parallel at the enclosure terminals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,400-Watt RMS Handling:\u003c\/strong\u003e Supports use with an external amplifier matched to the enclosure's continuous rating and impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling System:\u003c\/strong\u003e Direct voice-coil venting and aluminum heat-sink elements help manage operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarpet-Wrapped Finish:\u003c\/strong\u003e The finished exterior is designed for a clean appearance in truck and custom vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJME6D1TV2 uses a ported, carpet-wrapped enclosure loaded with two MOJO Mini subwoofers. Driver details include fiberglass-reinforced cones, stitched foam surrounds, vented cast-aluminum baskets, and 4-layer wound copper voice coils. The enclosure is a thin-profile truck-box design with a 3.5-inch top depth and 7.5-inch bottom depth.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation, particularly the 36.1-inch width and 14.2-inch height. Connect an amplifier that is designed to operate at the enclosure's 1-ohm final impedance, using speaker wire up to 10 AWG at the single spring-post terminal set. The included mounting brackets and hardware can be used to secure the enclosure; no amplifier is included with the listed package contents.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633177190470,"sku":"MJME6D1TV2","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51tjRoOStBL.jpg?v=1784409431"},{"product_id":"memphis-mjme8s1v2-8-loaded-ported-subwoofer-enclosure","title":"Memphis MJME8S1V2 8\" Loaded Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis MJME8S1V2 is a loaded ported enclosure built around one 8-inch MOJO Mini subwoofer. It provides a ready-to-install bass solution for vehicles where adding low-frequency output without designing a custom enclosure is the goal. Its 1-ohm final impedance is intended for use with a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want a compact single-subwoofer upgrade for a car or truck audio system. The ported cabinet is designed to support strong low-frequency output, with a confirmed frequency response of 38-150 Hz. It handles 900 watts RMS and 1,800 watts peak power.\u003c\/p\u003e\u003cp\u003eThe installed MOJO Mini subwoofer uses a vented cast-aluminum basket, a fiberglass-reinforced dust cap, and a VGroove rubber surround. A 4-layer copper 2-inch voice coil and heat-dissipating aluminum heat sink help manage heat during demanding playback. Memphis also specifies DVVC Direct Vent Voice Coil Cooling for additional voice-coil ventilation.\u003c\/p\u003e\u003cp\u003eThe MJME8S1V2 combines its bass system with a finished enclosure that is practical for visible cargo-area installations. Its carpet-wrapped cabinet and piano-black gloss front panel provide a clean appearance while the ported design supports the subwoofer's output range. The enclosure has one 8-inch woofer and a single 1-ohm final load.\u003c\/p\u003e\u003cp\u003eUse this loaded enclosure as the bass section of a system with an external amplifier that is stable at 1 ohm and appropriately power matched. Confirm the available cargo or behind-seat space before purchase, especially the enclosure's 20.7-inch width and 16.2-inch bottom depth. A properly selected amplifier, wiring kit, and secure mounting arrangement are required for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 8-Inch MOJO Mini Subwoofer:\u003c\/strong\u003e Provides a complete bass enclosure with one installed subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900W RMS Power Handling:\u003c\/strong\u003e Supports substantial continuous power with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Impedance:\u003c\/strong\u003e Designed for an amplifier rated to operate at 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Supports bass output across its specified operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Layer Copper Voice Coil:\u003c\/strong\u003e Uses a 2-inch coil built for heat management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiano-Black Front Panel:\u003c\/strong\u003e Adds a gloss-finished visual detail to the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJME8S1V2 uses a carpet-wrapped, ported enclosure with a piano-black gloss finished front panel. The cabinet is listed with 3\/4-inch medium-density fiberboard construction, while the subwoofer uses a vented cast-aluminum basket, fiberglass-reinforced dust cap, VGroove rubber surround, and aluminum heat sink.\u003c\/p\u003e\u003cp\u003eMeasure the intended installation area before ordering: the enclosure is 20.7 inches wide, 12.7 inches high, 13.7 inches deep at the top, and 16.2 inches deep at the bottom. Wire the spring-post input to an external amplifier that is stable at the enclosure's 1-ohm load; the terminals accept up to 10-gauge speaker wire. Secure the enclosure to prevent movement during driving and keep the port unobstructed.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633178959942,"sku":"MJME8S1V2","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-DYYHU34L.jpg?v=1784409469"},{"product_id":"memphis-audio-mjmechev8d1v2-dual-8-subwoofer-enclosure","title":"Memphis Audio MJMECHEV8D1V2 Dual 8\" Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis Audio MJMECHEV8D1V2 is a vehicle-specific loaded subwoofer enclosure for 2007 and newer Chevrolet and GMC crew cab trucks. It combines two 8-inch MOJO Mini subwoofers in a compact enclosure designed for an under-seat-style truck installation. This solution gives truck owners a purpose-built way to add substantial bass without commissioning a custom enclosure.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for Chevrolet Silverado and GMC Sierra crew cab owners who want a direct-fit bass upgrade. Its vehicle-specific form is designed to fit with zero customization, helping preserve usable cabin space and simplify the planning process. The loaded design means the subwoofers are already matched to the enclosure.\u003c\/p\u003e\u003cp\u003eDual 8-inch MOJO Mini subwoofers and a side-ported enclosure provide a high-output bass foundation for a compatible audio system. The assembly is rated for 1,800 watts RMS and 3,600 watts peak power. Its 1-ohm final impedance is intended for use with an amplifier that is stable at a 1-ohm load.\u003c\/p\u003e\u003cp\u003eMemphis equips the subwoofers with stitched foam surrounds, heat-dissipating aluminum heat sinks, and DVVC Direct Vent Voice Coil Cooling. These features are designed to manage heat during demanding playback and support consistent operation. Protective high-excursion grilles help shield the woofers in an active truck cabin environment.\u003c\/p\u003e\u003cp\u003eThe MJMECHEV8D1V2 is a practical foundation for a dedicated low-frequency upgrade while retaining the factory radio or pairing with an aftermarket source unit. Add a properly matched mono amplifier, power wiring, signal integration, and installation hardware to complete the system. Its factory-oriented fit and preloaded configuration make it well suited to installers and truck owners seeking a more streamlined bass package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Designed for 2007 and newer Chevrolet and GMC crew cab trucks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch Subwoofers:\u003c\/strong\u003e Includes two MOJO Mini 8-inch subwoofers in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Provides a 1-ohm final impedance for a compatible mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Ported Enclosure:\u003c\/strong\u003e Uses a ported enclosure with a side-mounted port design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct Vent Voice Coil Cooling helps manage subwoofer heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles:\u003c\/strong\u003e High-excursion grilles help protect the exposed subwoofers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses a Memphis-branded durable bedliner finish intended to withstand regular truck-cabin use. Its loaded configuration combines two MOJO Mini subwoofers with stitched foam surrounds and aluminum heat sinks. Protective high-excursion grilles add physical protection at the woofer locations.\u003c\/p\u003e\u003cp\u003eVerify vehicle trim, rear-seat clearance, and amplifier compatibility before installation. Connect the enclosure to an amplifier rated for a 1-ohm load and match amplifier output responsibly to the enclosure's 1,800-watt RMS rating. Professional installation is recommended when integrating with a factory audio system or routing amplifier power wiring.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633179058246,"sku":"MJMECHEV8D1V2","price":899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71F-hWQZPrL.jpg?v=1784409509"},{"product_id":"memphis-mjmeford8d1v2-dual-8-mojo-mini-ford-enclosure","title":"Memphis MJMEFORD8D1V2 Dual 8\" MOJO Mini Ford Enclosure","description":"\u003cp\u003eThe Memphis MJMEFORD8D1V2 is a vehicle-specific loaded subwoofer enclosure for select Ford trucks. It combines two 8-inch MOJO Mini subwoofers in a side-ported enclosure intended to install beneath the rear seat. This provides a dedicated bass upgrade without requiring custom enclosure fabrication.\u003c\/p\u003e\u003cp\u003eThis enclosure is designed for 2009-up Ford F-150 SuperCrew trucks and 2017-up Ford F-250 and F-350 Super Duty trucks. Its vehicle-specific form is intended to fit the interior without modification. Confirm the exact truck configuration before purchase and installation.\u003c\/p\u003e\u003cp\u003eThe dual 8-inch arrangement is wired for a 1-ohm final impedance and is rated for 1800 watts RMS and 3600 watts peak power. The ported enclosure design is built to support strong low-frequency output in a pickup cabin. It is suited to systems using a compatible high-power mono subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eMOJO Mini subwoofer engineering includes Direct Vent Voice Coil Cooling (DVVC), a heat-dissipating aluminum heat sink, and a vented cast-aluminum basket. Each woofer uses a four-layer copper 2-inch voice coil. These features are designed to help manage heat and maintain structural support during sustained bass playback.\u003c\/p\u003e\u003cp\u003eThe enclosure has a Memphis-branded durable bedliner finish for a rugged installed appearance. Protective high-excursion metal grilles are included to help shield the woofers in the rear-seat area. With the enclosure and subwoofers already matched, an installer can focus on amplifier selection, power wiring, signal integration, and system tuning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fit:\u003c\/strong\u003e Designed for select Ford SuperCrew and Super Duty trucks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch Subwoofers:\u003c\/strong\u003e Includes two MOJO Mini 8-inch woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Matches compatible mono amplifiers rated for 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1800-Watt RMS Rating:\u003c\/strong\u003e Supports substantial continuous system power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide-Ported Enclosure:\u003c\/strong\u003e Uses a ported design for low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Metal Grilles:\u003c\/strong\u003e Helps protect woofers beneath the rear seat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJMEFORD8D1V2 uses a side-ported enclosure finished in durable bedliner coating, with protective high-excursion grilles over the subwoofers. Its woofer hardware includes vented cast-aluminum baskets, fiberglass-reinforced dust caps, VGroove rubber surrounds, aluminum heat sinks, and four-layer copper voice coils. The loaded design supplies the enclosure and both subwoofers as one matched assembly.\u003c\/p\u003e\u003cp\u003eInstall the enclosure under the rear seat in a confirmed compatible Ford truck, following the vehicle-specific placement intended by Memphis. Use a compatible mono amplifier that is stable at the enclosure's 1-ohm final impedance, plus appropriate power, ground, speaker, and signal wiring. The manufacturer and product listings do not identify an amplifier or wiring kit as included, so those components should be planned separately.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633179123782,"sku":"MJMEFORD8D1V2","price":899.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71mZZ60rY3L.jpg?v=1784409545"},{"product_id":"memphis-mjp1000-1-1000w-rms-monoblock-subwoofer-amplifier","title":"Memphis MJP1000.1 1000W RMS Monoblock Subwoofer Amplifier","description":"\u003cp\u003eThe Memphis MJP1000.1 is a mono car subwoofer amplifier designed to supply dedicated low-frequency power in a compact chassis. It delivers 1,000 watts RMS into a 1-ohm load, with lower-power options at 2 and 4 ohms for different subwoofer wiring configurations. This makes it a practical choice for a single-subwoofer system or a matched multi-sub setup.\u003c\/p\u003e\u003cp\u003eIts variable low-pass crossover, subsonic filter, bass boost, and phase control provide the adjustments needed to integrate a subwoofer with the rest of a vehicle audio system. The low-pass filter helps limit the amplifier to bass frequencies, while the subsonic filter can be set to reduce very low frequencies below an enclosure's useful range. These controls support more deliberate system tuning rather than relying on a fixed bass setting.\u003c\/p\u003e\u003cp\u003eThe MJP1000.1 accepts both low-level and high-level signals, allowing it to work with many aftermarket receivers and factory audio systems. Low-level input sensitivity is rated from 200 mV to 6V, while high-level input capability is rated from 3V to 20V. Speaker-level installation requires speaker-wire-to-RCA adapters.\u003c\/p\u003e\u003cp\u003eAn extruded aluminum heatsink forms the amplifier chassis and provides a compact 7.5 x 9.5 x 2-inch footprint. The amplifier is rated for operation down to 1 ohm and uses a 12 dB\/octave Butterworth crossover design. A wired remote level control is included for adjusting subwoofer output from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eFor systems that need more output, the MJP1000.1 can be strapped with a second matching MJP1000.1 amplifier. The strap configuration uses master\/slave operation and is intended only with two identical compatible MOJO Pro mono amplifiers. It is suited to installers planning a system that can begin with one amplifier and expand later.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Mono Output:\u003c\/strong\u003e Delivers up to 1,000 watts RMS to a compatible 1-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree RMS Power Ratings:\u003c\/strong\u003e Supports 425W at 4 ohms, 725W at 2 ohms, and 1,000W at 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts from 32 to 200 Hz to focus output on subwoofer frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Subsonic Filter:\u003c\/strong\u003e Adjusts from 10 to 50 Hz to help manage ultra-low bass content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrappable Mono Design:\u003c\/strong\u003e Allows two matching MJP1000.1 amplifiers to be linked for a larger system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer level from the listening position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1000.1 uses an extruded aluminum heatsink chassis with exposed aluminum details and an orange MOJO Pro accent strip. Its chassis dimensions are 7.5 inches long, 9.5 inches wide, and 2 inches high. Three onboard 40A fuses provide a total installed fuse rating of 120A.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a dry, ventilated location with clearance around the heatsink and access to its adjustment controls. Use appropriately sized power, ground, remote-turn-on, speaker, and signal wiring; the manufacturer lists the 0GKIT as the recommended amplifier kit, while the amplifier includes 4-gauge ferrules. Match final subwoofer wiring to a supported 1-, 2-, or 4-ohm load, and use a second identical MJP1000.1 only when configuring a strapped system.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633179320390,"sku":"MJP1000-1","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zMmn4cGzL.jpg?v=1784409597"},{"product_id":"memphis-mjp1022-10-dual-2-ohm-component-subwoofer","title":"Memphis MJP1022 10\" Dual 2-Ohm Component Subwoofer","description":"\u003cp\u003eThe Memphis MJP1022 is a 10-inch MOJO Pro component subwoofer built for car-audio systems that need substantial low-frequency output from a compact driver. Its dual 2-ohm voice coils provide flexible wiring options for matching a compatible mono or multichannel amplifier. As an unboxed component subwoofer, it is intended for installation in a properly designed sealed or vented enclosure.\u003c\/p\u003e\u003cp\u003eWith a 750-watt RMS power rating and 1,500-watt peak rating, the MJP1022 is suited to systems designed around dedicated bass amplification. It uses a rigid paper cone and double-stitched foam surround to support controlled cone movement. The progressive spider helps manage excursion during higher-output playback.\u003c\/p\u003e\u003cp\u003eThe MJP1022 is designed for high-SPL-oriented installations while retaining practical enclosure options. Its specified sensitivity is 82.6 dB, with a resonant frequency of 35.3 Hz. The recommended sealed and vented enclosure volumes give installers a starting point for tuning the driver to available space and bass goals.\u003c\/p\u003e\u003cp\u003eMemphis uses Direct Vent Voice Coil Cooling, cross-drilled front-plate venting, and a 2.5-inch voice coil to help manage heat during sustained operation. An aluminum shorting ring is used to reduce inductance. These engineering details support the driver’s intended use in amplified bass systems.\u003c\/p\u003e\u003cp\u003eDual 2-ohm voice coils can be wired in parallel for a 1-ohm final load or in series for a 4-ohm final load. This makes the MJP1022 useful when selecting an amplifier around its stable impedance range. Confirm amplifier capability, enclosure clearance, and wiring configuration before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils\u003c\/strong\u003e Provide 1-ohm parallel or 4-ohm series wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750-Watt RMS Rating\u003c\/strong\u003e Supports use with appropriately matched dedicated amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling\u003c\/strong\u003e Direct vent voice-coil cooling helps manage operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone\u003c\/strong\u003e Provides a durable cone structure for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Stitched Foam Surround\u003c\/strong\u003e Supports cone movement and long-term mechanical stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Basket\u003c\/strong\u003e Provides a rigid mounting structure for the driver assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1022 combines a rigid paper cone, double-stitched foam surround, progressive spider, die-cast basket, and single-sided compression terminals. Its motor structure includes a 120-ounce magnet, 2.5-inch voice coil, cross-drilled front plate, and aluminum shorting ring. The frame outside diameter is 11.23 inches, with a 9.45-inch cutout requirement.\u003c\/p\u003e\u003cp\u003eAllow at least 5.72 inches of mounting depth and use an enclosure built for the recommended gross internal volume. A single sealed enclosure is specified at 0.75 cubic feet, while a single vented enclosure is specified at 1.6 cubic feet with a 37 Hz tuning recommendation. Wire both voice coils consistently and use an amplifier that is stable at the chosen 1-ohm or 4-ohm final impedance.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633180762182,"sku":"MJP1022","price":239.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71rg-chsuDS.jpg?v=1784409934"},{"product_id":"memphis-mjp1222-12-dual-2-ohm-mojo-pro-subwoofer","title":"Memphis MJP1222 12\" Dual 2-Ohm MOJO Pro Subwoofer","description":"\u003cp\u003eThe Memphis MJP1222 is a 12-inch MOJO Pro car subwoofer with dual 2-ohm voice coils. It is intended for systems that need substantial low-frequency output while retaining practical enclosure options. With a 750-watt RMS rating, it is suited to a properly matched external subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis model is designed for listeners building an SPL-focused bass system in a car or truck. Its rigid paper cone, foam surround, and progressive spider support controlled cone movement under demanding use. The result is a purpose-built woofer for bass-heavy music and high-output system upgrades.\u003c\/p\u003e\u003cp\u003eMemphis equips the MJP1222 with DVVC Direct Vent Voice Coil Cooling and cross-drilled front-plate venting. These features are designed to help manage voice-coil heat during operation. An aluminum shorting ring is also used to reduce inductance.\u003c\/p\u003e\u003cp\u003eThe dual 2-ohm voice-coil configuration gives installers wiring flexibility. The coils can be wired for either a 1-ohm parallel load or a 4-ohm series load, provided the amplifier is compatible with the selected final impedance. This makes the subwoofer adaptable to a range of mono amplifier setups.\u003c\/p\u003e\u003cp\u003eFor enclosure planning, Memphis specifies 1.5 cubic feet gross for one sealed subwoofer or 2.5 cubic feet gross for one vented subwoofer. The 6.23-inch mounting depth and 11.34-inch cutout diameter should be checked against the enclosure before installation. It is a component subwoofer, so an enclosure, amplifier, wiring, and installation hardware are needed separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750 Watts RMS:\u003c\/strong\u003e Handles continuous power in a properly matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct vent voice-coil cooling helps manage operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Shorting Ring:\u003c\/strong\u003e Reduces inductance as specified by Memphis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone:\u003c\/strong\u003e Provides a durable cone structure for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiecast Basket:\u003c\/strong\u003e Creates a rigid foundation for the moving assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1222 uses a rigid paper cone, double-stitched foam surround, progressive spider, diecast basket, and single-sided compression terminals. Its 2.5-inch voice coil works with a 120-ounce magnet assembly. Cross-drilled front-plate venting and DVVC cooling are integrated into the subwoofer design.\u003c\/p\u003e\u003cp\u003eUse an enclosure that meets the published gross-volume recommendations and confirm the 11.34-inch cutout and 6.23-inch mounting-depth requirements before cutting. Match the amplifier to the 750-watt RMS rating and wire the dual 2-ohm coils only to an amplifier rated for the final 1-ohm or 4-ohm load. A suitable enclosure, amplifier, power wiring, speaker wire, and mounting hardware are required for a complete installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633180794950,"sku":"MJP1222","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71IzotZT3eL.jpg?v=1784409977"},{"product_id":"memphis-mjp1244-12-dual-4-ohm-mojo-pro-subwoofer","title":"Memphis MJP1244 12\" Dual 4-Ohm MOJO Pro Subwoofer","description":"\u003cp\u003eThe Memphis MJP1244 is a 12-inch MOJO Pro car subwoofer designed for systems that need substantial low-frequency output from a conventional enclosure format. Its dual 4-ohm voice coil configuration gives installers wiring flexibility while supporting a single-subwoofer bass upgrade. With 750 watts RMS power handling, it is intended for use with a properly matched external amplifier.\u003c\/p\u003e\u003cp\u003eThis subwoofer is aimed at listeners building an SPL-oriented car audio system who want strong, forceful bass without moving to an unusually large or specialized enclosure. The rigid paper cone, double-stitched foam surround, and progressive spider are designed to support controlled cone movement. Its 85.68 dB sensitivity and 36.7 Hz resonant frequency provide a foundation for enclosure-based bass tuning.\u003c\/p\u003e\u003cp\u003eMemphis uses DVVC Direct Vent Voice Coil Cooling and cross-drilled front-plate venting to help manage heat around the 2.5-inch voice coil. An aluminum shorting ring is used to reduce inductance. These engineering details support stable operation when the subwoofer is used within its rated power range.\u003c\/p\u003e\u003cp\u003eThe MJP1244 uses dual 4-ohm voice coils that can be wired to a 2-ohm parallel load or an 8-ohm series load. This makes it suitable for pairing with mono amplifiers that are stable at the selected final impedance. Confirm the amplifier's rated output at the chosen load before wiring the subwoofer.\u003c\/p\u003e\u003cp\u003eFor enclosure planning, Memphis recommends a 1.5 cubic-foot sealed box or a 2.5 cubic-foot vented box for one MJP1244. The vented recommendation uses a 5 by 5 inch port measuring 27 inches long and is tuned to 36 Hz. Its 6.23-inch mounting depth and 11.34-inch cutout diameter should be checked against the enclosure before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils\u003c\/strong\u003e Enables 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling\u003c\/strong\u003e Supports properly matched high-power mono amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling\u003c\/strong\u003e Direct venting helps manage voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Voice Coil\u003c\/strong\u003e Provides a substantial thermal and mechanical platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone\u003c\/strong\u003e Supports responsive bass output and cone stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiecast Basket\u003c\/strong\u003e Provides a rigid mounting structure for the motor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1244 combines a rigid paper cone, double-stitched foam surround, progressive spider, diecast basket, aluminum shorting ring, and single-sided compression terminals. Its 120-ounce magnet and 2.5-inch voice coil are paired with cross-drilled front-plate venting and DVVC cooling. The design is intended for high-SPL car audio applications while retaining compatibility with traditional subwoofer enclosures.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in a strong, sealed enclosure with at least 6.23 inches of mounting-depth clearance and an 11.34-inch cutout. Wire both 4-ohm voice coils correctly for either a 2-ohm parallel or 8-ohm series final load, then select an amplifier that is rated appropriately at that impedance. For a single-subwoofer system, use Memphis's recommended 1.5 cubic-foot sealed or 2.5 cubic-foot vented enclosure volume as the starting point.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633180860486,"sku":"MJP1244","price":259.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71dVc1Ecy7L.jpg?v=1784410022"},{"product_id":"memphis-mjp1500-1-1500w-rms-monoblock-subwoofer-amplifier","title":"Memphis MJP1500.1 1500W RMS Monoblock Subwoofer Amplifier","description":"\u003cp\u003eThe Memphis MJP1500.1 is a mono car subwoofer amplifier designed to supply substantial low-frequency power from a compact chassis. It is rated for 1-ohm operation and delivers up to 1500 watts RMS to a single subwoofer system. This makes it a practical choice for listeners building a dedicated bass upgrade rather than powering full-range speakers.\u003c\/p\u003e\u003cp\u003eIts power ratings provide flexibility for different final subwoofer loads. The amplifier is rated at 675 watts RMS at 4 ohms, 1050 watts RMS at 2 ohms, and 1500 watts RMS at 1 ohm. Matching the amplifier to a properly wired subwoofer system helps use its output capability appropriately.\u003c\/p\u003e\u003cp\u003eThe MJP1500.1 is built for controlled bass tuning, with a variable low-pass crossover and a subsonic filter. These adjustments allow the amplifier to focus output on low frequencies while helping tailor response for the subwoofer enclosure and music preferences. A variable EQ bass boost provides another adjustment for low-end balance.\u003c\/p\u003e\u003cp\u003eAn extruded aluminum heatsink forms the amplifier chassis and is intended to help manage heat during operation. Its 7.5 x 11 x 2-inch footprint is relatively compact for a 1500-watt RMS mono amplifier. The low-profile design can suit trunk, rear-seat, or other appropriately ventilated mounting locations.\u003c\/p\u003e\u003cp\u003eFor system integration, the MJP1500.1 supports both low-level and high-level input ranges. It can work with many aftermarket receivers through preamp-level signals or with systems using speaker-level outputs. The amplifier is also strap-able with compatible mono amplifiers for installations that require a linked amplifier arrangement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Output:\u003c\/strong\u003e Delivers up to 1500 watts RMS into a 1-ohm final load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree RMS Ratings:\u003c\/strong\u003e Provides rated output at 4-, 2-, and 1-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Crossover:\u003c\/strong\u003e Adjusts the subwoofer frequency range from 32 to 200 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic Filter:\u003c\/strong\u003e Provides adjustable filtering from 10 to 50 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Compatibility:\u003c\/strong\u003e Accepts low-level RCA or high-level speaker signal ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap-Able Mono Design:\u003c\/strong\u003e Supports linking with compatible mono amplifiers for expanded systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1500.1 uses an extruded aluminum heatsink chassis with exposed aluminum accents and an orange accent strip. This construction supports heat dissipation while maintaining a compact 2-inch height. The amplifier is finished in black and gray.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a secure, ventilated location and wire the connected subwoofer system to a final impedance no lower than 1 ohm. Use a power kit appropriate for the installation; Memphis lists its 0GKIT as the applicable amplifier kit. Set the input sensitivity, low-pass crossover, subsonic filter, and bass EQ after confirming the source unit and enclosure configuration.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633180893254,"sku":"MJP1500-1","price":499.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71XTGhoZguL.jpg?v=1784410058"},{"product_id":"memphis-mjp1522-15-dual-2-ohm-mojo-pro-subwoofer","title":"Memphis MJP1522 15\" Dual 2-Ohm MOJO Pro Subwoofer","description":"\u003cp\u003eThe Memphis MJP1522 is a 15-inch MOJO Pro component car subwoofer designed for systems that need substantial low-frequency output. Its dual 2-ohm voice-coil configuration provides wiring flexibility for compatible mono amplifiers. This model is intended for a custom enclosure and is not a powered or pre-loaded subwoofer.\u003c\/p\u003e\u003cp\u003eRated for 750 watts RMS and 1,500 watts peak power, the MJP1522 is suited to listeners building a high-output bass system. Its 87 dB sensitivity supports strong output when paired with an appropriately matched amplifier. The large 15-inch cone is designed to add impact and weight to music with demanding bass content.\u003c\/p\u003e\u003cp\u003eMemphis uses DVVC Direct Vent Voice Coil Cooling and cross-drilled front-plate venting to help manage heat during sustained use. An aluminum shorting ring is incorporated to reduce inductance. These engineering details support controlled operation in high-SPL-focused installations.\u003c\/p\u003e\u003cp\u003eThe MJP1522 combines a rigid paper cone with a double-stitched foam surround and progressive spider. A die-cast basket provides a stable foundation for the moving assembly, while single-sided compression terminals simplify speaker-wire connections. The result is a purpose-built subwoofer architecture for custom vehicle audio systems.\u003c\/p\u003e\u003cp\u003eThis subwoofer is designed to fit more traditional enclosure applications, including sealed and vented designs. Memphis publishes gross-volume recommendations for single- and dual-subwoofer systems, allowing installers to select an enclosure approach based on available space and output goals. Allow for its 7.88-inch mounting depth and 13.84-inch cutout requirement before planning the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Enables 1-ohm parallel or 4-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Vented voice-coil design helps manage operating heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Shorting Ring:\u003c\/strong\u003e Reduces inductance in the motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone:\u003c\/strong\u003e Provides a durable cone structure for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Basket:\u003c\/strong\u003e Supplies a rigid platform for the driver assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP1522 uses a 120-ounce magnet, 2.5-inch voice coil, rigid paper cone, double-stitched foam surround, progressive spider, and die-cast basket. Cross-drilled front-plate venting and direct voice-coil ventilation are part of its thermal-management design. Single-sided compression terminals provide the connection point for subwoofer wiring.\u003c\/p\u003e\u003cp\u003eInstall the MJP1522 in a properly designed sealed or vented enclosure, observing the published 13.84-inch cutout diameter and 7.88-inch mounting depth. For one subwoofer, Memphis recommends 2.6 cubic feet gross sealed or 4.4 cubic feet gross vented; use an amplifier and wiring configuration compatible with its dual 2-ohm coils. Professional installation is recommended when enclosure construction, system gain setting, or amplifier impedance matching is unfamiliar.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633181057094,"sku":"MJP1522","price":299.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/710wKcbpT2S.jpg?v=1784410099"},{"product_id":"memphis-mjp2000-1-2000w-rms-mono-subwoofer-amplifier","title":"Memphis MJP2000.1 2000W RMS Mono Subwoofer Amplifier","description":"\u003cp\u003eThe Memphis MJP2000.1 is a mono subwoofer amplifier built for high-output car audio systems that need dedicated low-frequency power. It delivers a rated 2000 watts RMS through one channel at 1 ohm, with additional power ratings for 2-ohm and 4-ohm subwoofer loads. It is suited to systems where the subwoofer or subwoofer array is wired to a compatible final impedance.\u003c\/p\u003e\u003cp\u003eDesigned as part of Memphis Audio's MOJO Pro series, the MJP2000.1 provides focused bass amplification without requiring a multi-channel amplifier to handle the low end. Its 11Hz-200Hz frequency response and variable crossover controls support integration with a separate full-range speaker amplifier. A variable subsonic filter and variable EQ bass boost provide additional tuning tools for subwoofer systems.\u003c\/p\u003e\u003cp\u003eThe amplifier uses 12dB-per-octave Butterworth crossovers to help shape the bass range sent to connected subwoofers. Its input range of 400mV to 7.5V accommodates a range of source-unit and signal-processor output levels. Total harmonic distortion is rated below 1% at 4 ohms, and the signal-to-noise ratio is rated at 80dB.\u003c\/p\u003e\u003cp\u003eAn extruded aluminum heatsink forms the amplifier chassis and is designed to manage heat during sustained operation. Exposed aluminum accents and the MOJO orange accent strip give the amplifier its distinctive series appearance. The compact 2-inch-tall chassis can be useful where mounting height is limited, while its 13.2-inch length should be considered during layout planning.\u003c\/p\u003e\u003cp\u003eThe MJP2000.1 can be strapped with another compatible mono amplifier for expanded-system applications. A wired bass knob is included for convenient level adjustment from the driver's seat. Memphis recommends its 0GKIT installation kit, making this amplifier appropriate for professionally planned high-current subwoofer upgrades.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000W RMS Mono Output:\u003c\/strong\u003e Delivers one-channel RMS power at a 1-ohm load for compatible subwoofer systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Rated Load Outputs:\u003c\/strong\u003e Provides rated RMS output at 4 ohms, 2 ohms, and 1 ohm for flexible subwoofer wiring plans.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12dB Butterworth Crossovers:\u003c\/strong\u003e Helps tailor the amplifier's low-frequency output to the rest of the audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Controls:\u003c\/strong\u003e Includes variable crossover, subsonic-filter, and EQ bass-boost adjustment for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrappable Mono Design:\u003c\/strong\u003e Allows compatible mono amplifiers to be linked in larger installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Knob:\u003c\/strong\u003e Provides wired remote adjustment of bass level from the listening position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP2000.1 uses an extruded aluminum heatsink chassis with exposed aluminum details and a MOJO orange accent strip. This construction supports heat dissipation while giving the amplifier a durable, installation-focused exterior. Its dimensions are 7.5 inches wide, 13.2 inches long, and 2 inches high.\u003c\/p\u003e\u003cp\u003ePlan the subwoofer wiring so the final load matches one of the amplifier's rated 1-ohm, 2-ohm, or 4-ohm configurations. Allow clearance for wiring, ventilation, and access to the gain and tuning controls, and use appropriately sized power wiring; Memphis lists the 0GKIT as the recommended installation kit. For a strapped setup, follow the applicable Memphis installation instructions and use a compatible paired mono amplifier configuration.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633181089862,"sku":"MJP2000-1","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61KAif5sidL.jpg?v=1784410147"},{"product_id":"memphis-mjp3000-1-3000w-rms-monoblock-subwoofer-amplifier","title":"Memphis MJP3000.1 3000W RMS Monoblock Subwoofer Amplifier","description":"\u003cp\u003eThe Memphis MJP3000.1 is a high-output mono subwoofer amplifier designed for serious bass systems. It delivers up to 3000 watts RMS to a 1-ohm load, with lower-power ratings available at 2 and 4 ohms. This makes it suited to systems using one or more properly wired subwoofers that need substantial continuous power.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for builders who need a dedicated low-frequency channel rather than a full-range multi-channel amp. Its mono configuration focuses its output on subwoofer duty, with a frequency response specified from 11Hz to 200Hz. Adjustable filtering helps tailor bass output to the enclosure and the rest of the audio system.\u003c\/p\u003e\u003cp\u003eVariable low-pass and subsonic filters allow the MJP3000.1 to be set up around the usable range of a subwoofer system. The low-pass crossover adjusts from 32Hz to 200Hz, while the subsonic filter adjusts from 10Hz to 50Hz. A variable bass boost and phase control provide additional tuning options when integrating the amplifier.\u003c\/p\u003e\u003cp\u003eThe MJP3000.1 uses an extruded aluminum heatsink chassis for its compact high-power form factor. Its MOJO Pro design includes signal inputs for low-level and high-level sources, allowing it to work with many aftermarket and factory-audio integration approaches. RCA preamp outputs also support signal pass-through to another amplifier.\u003c\/p\u003e\u003cp\u003eFor expanded systems, compatible MJP3000.1 amplifiers can be strapped together. A wired remote level control is included for convenient subwoofer-level adjustment from the front of the vehicle. Because of its power capability, this amplifier is best paired with correctly matched subwoofers and appropriately sized power, ground, fuse, and charging-system components.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3000W RMS At 1 Ohm:\u003c\/strong\u003e Supplies high continuous power for demanding subwoofer systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Mono Design:\u003c\/strong\u003e Supports low-impedance subwoofer wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Sets the upper bass cutoff from 32Hz to 200Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Subsonic Filter:\u003c\/strong\u003e Helps manage very low frequencies from 10Hz to 50Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrap-Compatible Operation:\u003c\/strong\u003e Allows compatible amplifiers to be linked for more output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier is built around an extruded aluminum heatsink chassis and measures 7.5 x 16.8 x 2 inches according to Memphis specifications. It uses set-screw power, ground, remote-turn-on, and speaker terminals, along with RCA signal connections. Blue power and red protect indicators provide basic operating-status feedback.\u003c\/p\u003e\u003cp\u003eUse a properly designed 1\/0-gauge power and ground installation, with suitable external overcurrent protection near the battery. Match the final subwoofer impedance to the amplifier's rated load and set the crossover, subsonic filter, gain, bass boost, and phase carefully. The included remote level control is useful for level adjustment, but it should not replace correct gain setting during installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633181155398,"sku":"MJP3000-1","price":799.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61oDH8nIG_L.jpg?v=1784410188"},{"product_id":"memphis-mjp6-6-5-mojo-pro-midrange-speaker","title":"MEMPHIS MJP6 6.5\" MOJO Pro Midrange Speaker","description":"\u003cp\u003eThe MEMPHIS MJP6 is a single 6.5-inch MOJO Pro midrange speaker designed for high-output car audio, motorcycle, and powersports systems. It gives an upgrade path for systems that need stronger, more efficient midrange output than typical factory speakers provide. Its 4-ohm design makes it suitable for use with compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners building systems around powerful bass while maintaining clear, forward midrange presence. With 125 watts RMS power handling and 100 dB sensitivity, it is built to produce substantial output from an appropriately matched amplifier. It can be used as a dedicated midrange driver or in compact installations where a versatile woofer-style driver is needed.\u003c\/p\u003e\u003cp\u003eThe MJP6 uses a rigid paper cone and accordion-style cloth surround to support controlled cone movement at higher output levels. Its aluminum dust cap helps protect the center of the driver, while the water-resistant construction expands its use beyond conventional in-car locations. The published frequency range is 95 Hz to 12,000 Hz, so it is best considered a focused midrange or midbass-style driver rather than a full-range speaker.\u003c\/p\u003e\u003cp\u003eA neodymium magnet assembly helps keep the MJP6 compact while supporting its high-efficiency design. The speaker uses spring-post terminals that accept up to 12-gauge speaker wire for straightforward amplifier connections. A mesh grille is included to help protect the driver in exposed mounting locations.\u003c\/p\u003e\u003cp\u003eThe MJP6 is sold individually, allowing system builders to purchase the quantity needed for doors, kick panels, fairings, side-by-sides, or custom panels. No crossover is included, so crossover selection and tuning should match the rest of the system. Pair it with appropriate high-frequency drivers, low-frequency reinforcement, and an amplifier stable at 4 ohms for a balanced multi-speaker installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Handling:\u003c\/strong\u003e Supports use with a properly matched aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccordion Cloth Surround:\u003c\/strong\u003e Supports cone movement during higher-output playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction:\u003c\/strong\u003e Suits vehicle and powersports installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mesh Grille:\u003c\/strong\u003e Adds driver protection in exposed mounting positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP6 combines a rigid paper cone, aluminum dust cap, accordion cloth surround, and neodymium magnet structure. Its water-resistant construction and supplied mesh grille make it practical for installations where the speaker may be more exposed than a typical enclosed door location. The speaker is supplied as one individual driver.\u003c\/p\u003e\u003cp\u003eConfirm available mounting clearance before installation: the required cutout is approximately 5.6 inches and mounting depth is approximately 2.75 inches. Connect the spring-post terminals with speaker wire up to 12 gauge, observe polarity, and use external crossover settings appropriate to the system because no crossover is included. For best integration, use it with amplification that supports a 4-ohm load and power levels appropriate for its 125-watt RMS rating.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633181909062,"sku":"MJP6","price":129.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81VlARSE7YL.jpg?v=1784410243"},{"product_id":"memphis-mjp69-6x9-mojo-pro-neo-midrange-speaker","title":"Memphis MJP69 6x9\" MOJO Pro Neo Midrange Speaker","description":"\u003cp\u003eThe Memphis MJP69 is a 6x9-inch MOJO Pro midrange speaker designed for high-output vehicle and powersports audio systems. Sold individually, it provides a direct building block for custom speaker layouts in cars, motorcycles, side-by-sides, and similar applications. Its 4-ohm load and 200-watt RMS power rating make it suited to a properly matched aftermarket amplifier channel.\u003c\/p\u003e\u003cp\u003eThis is a one-way pro-audio-style midrange driver rather than a full component set. It is intended to reproduce the upper-bass and midrange region with strong output, making it a practical choice when a system needs more presence and projection than factory speakers can provide. For a complete frequency range, pair it with appropriate tweeters, bass reinforcement, and crossover or DSP tuning as required by the system design.\u003c\/p\u003e\u003cp\u003eThe MJP69 uses a high-efficiency design rated at 102 dB sensitivity. That sensitivity helps it produce substantial output from available amplifier power while its 200-watt RMS and 400-watt peak ratings support amplified applications. Its published frequency response is 98 Hz to 20 kHz, though final performance depends on placement, installation, crossover settings, and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eA low-profile neodymium magnet helps reduce rear mounting bulk and weight compared with larger conventional magnet structures. The speaker also uses a cast basket for structural support, an accordion cloth surround, and an aluminum dustcap. These materials support a durable pro-audio-oriented construction for demanding mobile installations.\u003c\/p\u003e\u003cp\u003eThe treated cone is water resistant for installations exposed to limited moisture, such as motorcycle fairings and side-by-side speaker locations. A mesh grille is included to help protect the driver in exposed mounting positions. With its 6x9-inch format and 2.79-inch mounting depth, the MJP69 is best used after confirming available clearance and mounting-hole alignment in the intended location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched amplified channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e102 dB Sensitivity:\u003c\/strong\u003e Helps deliver high output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Treated Cone:\u003c\/strong\u003e Suits installations with limited moisture exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Reduces magnet size and rear mounting bulk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccordion Cloth Surround:\u003c\/strong\u003e Supports controlled cone movement in a durable design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Grille Included:\u003c\/strong\u003e Adds driver protection for exposed speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP69 combines a treated water-resistant cone, accordion cloth surround, aluminum dustcap, cast basket, and low-profile neodymium magnet. Its 6x9-inch oval frame is configured as a single one-way midrange speaker with a 4-ohm nominal impedance. A mesh grille is included for added protection.\u003c\/p\u003e\u003cp\u003eConfirm that the installation location has sufficient clearance for the 2.79-inch mounting depth and 8.94 x 6.14-inch mounting-hole pattern. Use an amplifier channel compatible with a 4-ohm speaker and set gain conservatively for the 200-watt RMS rating. Because this is sold individually, purchase the needed quantity for the planned system and add compatible tweeters, crossover networks, or DSP where the system design calls for them.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633182433350,"sku":"MJP69","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81dIirisiiL.jpg?v=1784410292"},{"product_id":"memphis-mjp6c-6-5-mojo-pro-component-speaker-system","title":"Memphis MJP6C 6.5\" MOJO Pro Component Speaker System","description":"\u003cp\u003eThe Memphis MJP6C is a 6.5-inch, two-way component speaker system designed for high-output vehicle audio upgrades. It separates midrange and high-frequency reproduction into dedicated woofers and tweeters, with passive crossovers to direct the appropriate frequencies to each driver. This makes it a practical choice for listeners replacing basic full-range speakers with a more focused component layout.\u003c\/p\u003e\u003cp\u003eThe set includes two MJP6 midrange woofers, two MJPT25 bullet tweeters, and two passive crossover networks. Its 4-ohm design is intended for use with compatible aftermarket amplification or a suitable speaker channel. Mesh woofer grilles are also included for installations where the woofers need added physical protection.\u003c\/p\u003e\u003cp\u003eEach MJP6 woofer uses a die-cast aluminum basket, neodymium magnet, accordion-style cloth surround, and billet phase plug. The combination is intended to support efficient midrange output while keeping the driver assembly compact. The MJPT25 tweeters use 25mm aluminum bullet-dome diaphragms for dedicated high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eMemphis lists the MJP6C with treated water-resistant construction, expanding its potential use beyond conventional car-door installations. It can be considered for motorcycle fairings, side-by-sides, Jeeps, and other vehicle applications where exposure to the elements may be a concern. Proper enclosure, mounting location, and wiring protection remain important for long-term installation reliability.\u003c\/p\u003e\u003cp\u003eThe MJP6C fits well in a system built around an external amplifier and subwoofer, where the front-stage speakers can concentrate on mids and highs. Its included passive crossovers simplify the connection between each woofer, tweeter, and amplifier channel. Before purchase, confirm available mounting depth, cutout size, tweeter location, and vehicle-specific installation hardware requirements.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Component Set:\u003c\/strong\u003e Includes two woofers, two tweeters, and two crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch MJP6 Woofers:\u003c\/strong\u003e Dedicated midrange drivers for component-system installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25mm Bullet Tweeters:\u003c\/strong\u003e Separate aluminum tweeters reproduce upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossovers:\u003c\/strong\u003e Directs appropriate frequencies to each speaker driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnets:\u003c\/strong\u003e Provide strong motor performance in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Woofer Grilles:\u003c\/strong\u003e Add protection for exposed woofer installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP6C woofers use die-cast aluminum baskets, neodymium magnets, cloth surrounds, and billet phase plugs. The system also uses aluminum bullet-dome tweeters and treated water-resistant construction. These materials support a durable, purpose-built component-speaker design for vehicle audio applications.\u003c\/p\u003e\u003cp\u003eMount each woofer in a location that accommodates its 2.75-inch top-mount depth and approximately 5.625-inch cutout requirement. Connect each woofer and tweeter through its supplied passive crossover rather than wiring the tweeter directly to a full-range amplifier output. Verify polarity, secure all crossover connections, and use vehicle-specific mounting adapters or wiring harnesses when required.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633182498886,"sku":"MJP6C","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/913yB3KKDWL.jpg?v=1784410336"},{"product_id":"memphis-mjp750-1-750w-rms-monoblock-subwoofer-amplifier","title":"Memphis MJP750.1 750W RMS Monoblock Subwoofer Amplifier","description":"\u003cp\u003eThe Memphis MJP750.1 is a single-channel car audio amplifier designed to provide dedicated power for a subwoofer system. It delivers 300 watts RMS at 4 ohms, 500 watts RMS at 2 ohms, and 750 watts RMS at 1 ohm. This makes it suitable for systems that need a compact monoblock amp with flexible impedance options.\u003c\/p\u003e\u003cp\u003eBuilt for bass-focused installations, the MJP750.1 operates down to a 1-ohm speaker load and uses adjustable filtering to help tailor output to the connected subwoofer enclosure. Its frequency response is specified from 11Hz to 200Hz, covering the low-frequency range used in subwoofer applications. A wired remote level control is included for convenient output adjustment from the driver's seat.\u003c\/p\u003e\u003cp\u003eThe amplifier uses an extruded aluminum heatsink and chassis to support heat management in an installed vehicle environment. Exposed aluminum details and a MOJO Pro orange accent strip give it a purposeful, coordinated appearance for visible trunk or hatch installations. Its compact 7.5-inch length can help simplify placement where mounting space is limited.\u003c\/p\u003e\u003cp\u003eVariable low-pass and subsonic controls allow the amplifier to be adjusted for the subwoofer and enclosure being used. The 12dB-per-octave Butterworth crossover design provides a straightforward way to manage the bass range sent to the amplifier. Variable phase control and bass boost add further adjustment options during system tuning.\u003c\/p\u003e\u003cp\u003eThe MJP750.1 fits into a system as a dedicated subwoofer amplifier, with RCA inputs, high-level input capability, RCA outputs for feeding additional amplifiers, and a selectable master\/slave mode for strapping compatible mono amplifiers. It is intended for installations wired with the recommended Memphis 4GKIT amplifier kit. Careful speaker wiring is important, as loads below 1 ohm can damage the amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS at 1 Ohm:\u003c\/strong\u003e Supplies substantial single-channel power for a properly wired subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Mono Design:\u003c\/strong\u003e Supports subwoofer wiring configurations down to a 1-ohm final load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Controls:\u003c\/strong\u003e Includes low-pass, subsonic, phase, and bass-boost adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12dB Butterworth Crossovers:\u003c\/strong\u003e Helps tailor the low-frequency signal sent to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrappable Architecture:\u003c\/strong\u003e Allows two compatible MJP mono amplifiers to be configured together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the driver adjust amplifier output level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP750.1 uses an extruded aluminum heatsink and aluminum-accented chassis. Its enclosure measures 7.5 inches long, 7.91 inches wide, and 2 inches high. The design also includes power\/protect status indicators, RCA connections, speaker terminals, and externally accessible tuning controls.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a well-ventilated area, such as a trunk, hatch area, or behind a truck seat, and avoid mounting it with the cooling fins facing downward. Memphis specifies the 4GKIT amplifier wiring kit for this model; use matching-size power and ground wiring, install the battery-side fuse near the battery, and verify the final subwoofer load before connecting it. For a strapped setup, use a second compatible mono amplifier and follow the manufacturer’s master\/slave connection guidance.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633182564422,"sku":"MJP750-1","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Oj0r9endL.jpg?v=1784410387"},{"product_id":"memphis-mjp8-8-mojo-pro-water-resistant-midrange-speaker","title":"Memphis MJP8 8\" MOJO Pro Water-Resistant Midrange Speaker","description":"\u003cp\u003eThe Memphis MJP8 is an 8-inch high-efficiency MOJO Pro midrange speaker designed for high-output automotive and powersports audio systems. It is sold individually and is intended to reproduce the midrange frequencies that give vocals, guitars, horns, and percussion their presence in a larger sound system. Its 4-ohm design makes it suitable for use with a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eWith 200 watts RMS power handling and 102 dB sensitivity, the MJP8 is built for systems that need substantial acoustic output without requiring excessive amplifier power. It is a practical choice for custom door panels, motorcycle fairings, side-by-side enclosures, and other installations where space and output both matter. The speaker is designed as a dedicated midrange\/woofer rather than a full-range replacement speaker.\u003c\/p\u003e\u003cp\u003eThe MOJO Pro design uses a neodymium magnet motor to reduce motor size and weight while supporting efficient performance. A rigid paper cone and pleated accordion-style cloth surround are used to support controlled movement and durability. The billet aluminum phase plug helps support upper-midrange dispersion, making the speaker easier to integrate with separate tweeters.\u003c\/p\u003e\u003cp\u003eMemphis gives the MJP8 a water-resistant design for applications exposed to changing weather and outdoor conditions. That makes it appropriate for compatible motorcycle and powersports installations as well as conventional car-audio builds. A mesh grille is included to help protect the driver in exposed mounting locations.\u003c\/p\u003e\u003cp\u003eFor a complete system, pair the MJP8 with an amplifier matched to its 200-watt RMS rating at 4 ohms, appropriate high-pass filtering, and separate tweeters for upper-frequency reproduction. Its 92 Hz to 10,000 Hz frequency response supports its role as a high-output midrange driver. Installers should confirm available mounting depth and cutout clearance before fitting it into a vehicle panel or enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Midrange Driver\u003c\/strong\u003e Delivers focused midrange output for high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Handling\u003c\/strong\u003e Supports use with a properly matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e102 dB Sensitivity\u003c\/strong\u003e Produces strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet Motor\u003c\/strong\u003e Provides efficient performance in a compact motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Construction\u003c\/strong\u003e Suits compatible motorcycle and powersports applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Grille Included\u003c\/strong\u003e Adds driver protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP8 combines a rigid paper cone, pleated cloth surround, billet aluminum phase plug, neodymium magnet motor, and cast aluminum basket. These components support the speaker's high-efficiency pro-audio-oriented design. Its included mesh grille provides added physical protection when the driver is installed in an exposed location.\u003c\/p\u003e\u003cp\u003eMount the speaker in a rigid panel or enclosure with sufficient clearance for its 3.23-inch mounting depth and approximately 7.125-inch cutout. Use a compatible 4-ohm amplifier and set crossover points appropriately for a dedicated midrange driver; separate tweeters and bass speakers may be needed for full-system frequency coverage. The MJP8 is sold individually, so order the quantity required for the intended installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633182629958,"sku":"MJP8","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91fLtKdcQ6L.jpg?v=1784410427"},{"product_id":"memphis-mjp800-4-4-channel-car-amplifier","title":"Memphis MJP800.4 4-Channel Car Amplifier","description":"\u003cp\u003eThe Memphis MJP800.4 is a four-channel car amplifier designed to add substantial, controllable power to a vehicle speaker system. It delivers 125 watts RMS to each of four channels at 4 ohms or 200 watts RMS per channel at 2 ohms. This makes it a practical choice for powering front and rear speakers, component systems, or other full-range speaker arrangements.\u003c\/p\u003e\u003cp\u003eFor systems that need higher output from fewer channels, the MJP800.4 can be bridged to provide 400 watts RMS x 2 at 4 ohms. Its stereo channels are stable down to 2 ohms, while bridged operation requires a 4-ohm or higher load. This flexibility lets installers configure the amplifier around compatible speakers and the system's power goals.\u003c\/p\u003e\u003cp\u003eThe amplifier uses variable high-pass and low-pass crossovers to help direct appropriate frequencies to connected speakers. Each crossover adjusts from 50Hz to 250Hz with a 12dB-per-octave Butterworth slope. Independent front and rear crossover controls support different setup needs across the vehicle.\u003c\/p\u003e\u003cp\u003eA selectable three-position EQ boost provides 0dB, +6dB, or +12dB settings for tonal adjustment. The amplifier's 10Hz to 25kHz frequency response supports full-range audio use, while its rated THD is below 1%. Gain controls help match the amplifier to the output level of the connected source unit.\u003c\/p\u003e\u003cp\u003eThe MJP800.4 accepts both low-level and high-level source signals, making it suitable for many aftermarket and factory-radio integration projects. Its compact extruded-aluminum heatsink chassis is intended for installations where ventilation and efficient use of space matter. It fits naturally into a speaker-focused upgrade path when more output and crossover control are needed than a head unit can provide.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Powers four speakers with up to 200 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Capability:\u003c\/strong\u003e Combines channel pairs for 400 watts RMS x 2 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters help tailor speaker frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12dB Butterworth Slopes:\u003c\/strong\u003e Provides controlled frequency rolloff for speaker protection and system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable EQ Boost:\u003c\/strong\u003e Offers 0dB, +6dB, and +12dB adjustment positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Supports aftermarket RCA signals and compatible speaker-level integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP800.4 is built on an extruded aluminum heatsink chassis with exposed aluminum details and an orange accent strip. Its listed dimensions are 7.5 x 2 x 8.7 inches, supporting placement in many trunk, hatch, behind-seat, or side-panel installations. The heatsink design is intended to help manage operating heat when the amplifier is mounted with adequate airflow.\u003c\/p\u003e\u003cp\u003eUse a 4-gauge amplifier wiring kit as recommended by Memphis, with the power fuse installed near the battery. Mount the amplifier securely in a ventilated location and avoid mounting it with the fins facing downward. Verify speaker impedance before wiring: use 2 to 8 ohms per stereo channel, or 4 to 8 ohms for each bridged channel pair.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183350854,"sku":"MJP800-4","price":399.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71gdtd8TVKL.jpg?v=1784410470"},{"product_id":"memphis-mjp822-mojo-pro-8-dual-2-ohm-subwoofer","title":"Memphis MJP822 MOJO Pro 8\" Dual 2 Ohm Subwoofer","description":"\u003cp\u003eThe Memphis MJP822 is an 8-inch MOJO Pro subwoofer built for car audio systems that need substantial bass output in a more traditional-size enclosure. Its dual 2-ohm voice-coil configuration gives installers useful wiring flexibility when matching a mono amplifier. It is intended as a component subwoofer and requires a separate enclosure and amplifier.\u003c\/p\u003e\u003cp\u003eWith 750 watts RMS and 1,500 watts peak power handling, the MJP822 is designed for systems centered on high sound-pressure-level performance. Its compact 8-inch format can suit vehicles where larger subwoofers are impractical or where multiple smaller drivers are preferred. The rigid paper cone and double-stitched foam surround support controlled cone movement under demanding use.\u003c\/p\u003e\u003cp\u003eMemphis uses DVVC Direct Vent Voice Coil Cooling and cross-drilled front-plate venting to help manage heat around the motor and voice coil. A 2.5-inch voice coil gives the driver substantial thermal capacity for its size. An aluminum shorting ring is used to reduce inductance in the motor assembly.\u003c\/p\u003e\u003cp\u003eThe MJP822 uses a progressive spider, diecast basket, and double-stacked ferrite magnet motor structure. These elements provide a rigid foundation for the cone assembly and help maintain alignment during operation. The subwoofer has a listed sensitivity of 82 dB and a resonant frequency of 42 Hz.\u003c\/p\u003e\u003cp\u003eThis model can be used in sealed or ported custom enclosures, depending on system goals and available space. Memphis lists 0.6 cubic feet for a recommended sealed enclosure and 1.0 cubic foot for a recommended ported enclosure. Its 5.6-inch mounting depth and 7.3-inch cutout diameter should be confirmed against the planned enclosure before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for demanding bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Allows 1-ohm parallel or 4-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct venting helps dissipate voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Copper Voice Coil:\u003c\/strong\u003e Provides thermal capacity for sustained power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone:\u003c\/strong\u003e Supports stable bass reproduction under high output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiecast Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP822 combines a rigid paper cone, double-stitched foam surround, progressive spider, and diecast basket. Its 105-ounce double-stacked ferrite motor includes cross-drilled front-plate venting and an aluminum shorting ring. Single-sided compression terminals provide the speaker-wire connection point.\u003c\/p\u003e\u003cp\u003ePlan for a 7.3-inch cutout and at least 5.6 inches of mounting depth. A sealed enclosure of 0.6 cubic feet or a ported enclosure of 1.0 cubic foot is listed for this model. Wire the two 2-ohm coils in parallel for a 1-ohm final load or in series for a 4-ohm final load, only when the connected amplifier is rated for that impedance.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183481926,"sku":"MJP822","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81Oz_lgkxVL.jpg?v=1784410545"},{"product_id":"memphis-mjp844-mojo-pro-8-dual-4-ohm-subwoofer","title":"Memphis MJP844 MOJO Pro 8\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Memphis MJP844 is an 8-inch MOJO Pro car subwoofer built for systems that need substantial bass output from a compact driver. Its dual 4-ohm voice-coil configuration gives installers useful wiring flexibility when matching the subwoofer to a compatible amplifier. It is intended for a properly designed enclosure and an external car-audio amplifier.\u003c\/p\u003e\u003cp\u003eThis model is designed around high-SPL use, making it a practical choice for listeners who prioritize strong bass impact and system output. The 750-watt RMS rating provides the key power target for amplifier selection and gain setup. Its 1,500-watt peak rating describes short-duration power handling rather than the continuous amplifier-matching target.\u003c\/p\u003e\u003cp\u003eThe MJP844 uses a 2.5-inch voice coil with Memphis DVVC Direct Vent Voice Coil Cooling. Cross-drilled front-plate venting supports airflow around the motor structure during demanding use. An aluminum shorting ring is included to reduce inductance.\u003c\/p\u003e\u003cp\u003eIts moving assembly combines a rigid paper cone with a double-stitched foam surround and progressive spider. These components are supported by a die-cast basket designed to provide a stable mounting structure. Single-sided compression terminals provide the connection points for the dual voice coils.\u003c\/p\u003e\u003cp\u003eWith a 7.3-inch cutout requirement and 5.6-inch mounting depth, the MJP844 can be planned into custom compact bass systems where space is limited. The dual 4-ohm coils can be wired for either a 2-ohm parallel load or an 8-ohm series load. Pair it with an amplifier that is stable at the chosen final impedance and set up for approximately 750 watts RMS of clean power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching around 750 watts of continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVVC Cooling:\u003c\/strong\u003e Direct venting helps manage voice-coil heat under use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Voice Coil:\u003c\/strong\u003e Provides a substantial thermal platform for this compact subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRigid Paper Cone:\u003c\/strong\u003e Forms the primary diaphragm for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Basket:\u003c\/strong\u003e Provides a rigid foundation for the motor and suspension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP844 combines a rigid paper cone, double-stitched foam surround, progressive spider, die-cast basket, and 105-ounce magnet structure. Its motor includes a cross-drilled front plate, DVVC cooling, and an aluminum shorting ring. Single-sided compression terminals are used for speaker-wire connections.\u003c\/p\u003e\u003cp\u003ePlan for a 7.3-inch cutout and at least 5.6 inches of mounting depth before building or purchasing an enclosure. Wire both 4-ohm coils correctly to reach either a 2-ohm parallel or 8-ohm series final load, and verify that the amplifier supports that load. Use an external amplifier, enclosure, appropriate wiring, and careful gain adjustment for a complete installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183580230,"sku":"MJP844","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Gx1CgvY5L.jpg?v=1784410592"},{"product_id":"memphis-mjpe12d1-dual-12-1-ohm-loaded-enclosure","title":"Memphis MJPE12D1 Dual 12\" 1-Ohm Loaded Enclosure","description":"\u003cp\u003eThe Memphis MJPE12D1 is a preloaded dual 12-inch subwoofer enclosure for vehicle audio systems that need substantial low-frequency output without building a custom box. It combines two subwoofers and a ported enclosure in one ready-to-install assembly. Its 1-ohm nominal load is intended for a compatible external subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to drivers with enough cargo-area space for a full-size dual-subwoofer system. The front-ported design is tuned to 34 Hz, giving the system a low-bass-focused character. It can be a practical upgrade for a factory or aftermarket stereo when paired with the appropriate amplifier and integration hardware.\u003c\/p\u003e\u003cp\u003eThe MJPE12D1 is rated for 1,500 watts RMS and 3,000 watts peak power handling. Those ratings describe the complete loaded enclosure rather than an individual subwoofer. For dependable operation, amplifier setup should be matched to the enclosure's 1-ohm impedance and RMS rating.\u003c\/p\u003e\u003cp\u003eIts enclosure is constructed from 100% MDF and finished in custom-stitched carpet. A front load port supports the ported enclosure design, while a high-current nickel-plated compression terminal provides the connection point. These details help make the enclosure suitable for conventional trunk, hatch, or cargo-area installations where its dimensions can be accommodated.\u003c\/p\u003e\u003cp\u003eThe integrated subwoofers use black polypropylene dust caps, woven tinsel leads, and high-temperature BASV voice coil formers. These construction details support the enclosure's intended high-power bass role. The MJPE12D1 can serve as the bass foundation of a system with an aftermarket monoblock amplifier, wiring kit, and signal integration appropriate for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Configuration:\u003c\/strong\u003e Two preinstalled 12-inch subwoofers provide a complete bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with a compatible 1-ohm-stable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Load Port:\u003c\/strong\u003e Ported design is tuned to 34 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% MDF Enclosure:\u003c\/strong\u003e Provides a rigid enclosure structure for the installed subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNickel-Plated Compression Terminal:\u003c\/strong\u003e Offers a dedicated high-current speaker-wire connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPE12D1 uses a 100% MDF enclosure with a custom-stitched carpet exterior. Its front port, black polypropylene dust caps, and woven tinsel leads are part of the integrated design. The enclosure measures 34.65 inches long, 15.15 inches high, 12.6 inches deep at the top, and 17.72 inches deep at the bottom.\u003c\/p\u003e\u003cp\u003eConfirm the available cargo-space dimensions before purchase, including clearance for the front port and wiring at the terminal. Connect it only to an external amplifier that is stable at a 1-ohm load, and set amplifier gain and filtering carefully. An amplifier, wiring, and vehicle-specific signal integration are separate system components and are not identified as included with the enclosure.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183645766,"sku":"MJPE12D1","price":699.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VU2Ln-8_L.jpg?v=1784410632"},{"product_id":"memphis-mjpt25-1-mojo-pro-bullet-tweeters","title":"Memphis MJPT25 1\" MOJO Pro Bullet Tweeters","description":"\u003cp\u003eThe Memphis MJPT25 is a pair of 1-inch MOJO Pro bullet tweeters designed to add dedicated high-frequency output to a vehicle audio system. They are suited to systems that need more vocal presence, cymbal detail, and upper-frequency projection than factory speakers can provide. With a 4-ohm load and high 105 dB sensitivity, these tweeters are intended for high-output aftermarket applications.\u003c\/p\u003e\u003cp\u003eEach MJPT25 tweeter is rated for 100 watts RMS and 200 watts peak power handling. This power capability makes the pair appropriate for use with a properly matched external amplifier or a high-powered multi-channel system. Their 1,500-20,000 Hz frequency response focuses performance on the upper midrange and treble range.\u003c\/p\u003e\u003cp\u003eThe tweeters use aluminum dome diaphragms and a neodymium magnet motor structure. A billet phase plug is incorporated into the bullet-style design. This construction supports a compact high-efficiency format for installations where strong high-frequency output is a priority.\u003c\/p\u003e\u003cp\u003eThe MJPT25 uses a rear-mount threaded body design that allows the mounting surface to be secured between the threaded trim ring and mounting collar. Its compact 1-inch, 25 mm driver size works well in custom panels, doors, dash locations, motorcycle fairings, and other suitable speaker pods. A 1.69-inch mounting cutout is specified for installation.\u003c\/p\u003e\u003cp\u003eFor system integration, the included capacitors provide a basic first-order high-pass filter when another crossover is not being used. This helps protect the tweeters from low-frequency content that they are not designed to reproduce. Pair the MJPT25 with compatible midrange speakers, an appropriate crossover strategy, and amplifier power matched to its RMS rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Aluminum Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Rating:\u003c\/strong\u003e Supports use in properly matched amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Delivers strong output with efficient power use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits many aftermarket amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Phase Plug:\u003c\/strong\u003e Forms part of the durable bullet-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Rear Mount:\u003c\/strong\u003e Simplifies secure mounting through a prepared panel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPT25 combines an aluminum dome, billet phase plug, neodymium magnet, and gold-plated compression terminals in a compact bullet-tweeter assembly. Its threaded body, trim ring, and mounting collar are designed to secure the tweeter from the rear of the mounting surface. Grilles are not included.\u003c\/p\u003e\u003cp\u003ePlan for a 1.69-inch cutout and approximately 1.5 inches of mounting depth, while confirming clearance behind the mounting panel before drilling. Connect speaker wiring to the compression terminals, observing polarity, and use the included inline capacitor on the positive lead if no other suitable high-pass crossover is installed. The terminals accept up to 16-gauge speaker wire.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183875142,"sku":"MJPT25","price":179.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81kUsCMVeyL.jpg?v=1784410669"},{"product_id":"memphis-mjpt35-1-4-mojo-pro-bullet-tweeters","title":"Memphis MJPT35 1.4\" MOJO Pro Bullet Tweeters","description":"\u003cp\u003eThe Memphis MJPT35 is a pair of 35 mm (1.4-inch) MOJO Pro bullet tweeters designed to add dedicated high-frequency output to a vehicle or powersports audio system. It is intended for installations where conventional full-range speakers need added treble presence and projection. With a 4-ohm nominal impedance, the pair can be planned into compatible amplified or crossover-based systems.\u003c\/p\u003e\u003cp\u003eThese tweeters are aimed at listeners building a high-output component setup, including car, motorcycle-fairing, and side-by-side applications. Their high-efficiency design supports strong output from a compact driver. The 108 dB sensitivity specification helps them complement efficient midrange speakers in a MOJO Pro-style system.\u003c\/p\u003e\u003cp\u003eThe MJPT35 is rated for 125 watts RMS and 250 watts peak power handling. That rating makes proper amplifier gain setting and frequency management important when integrating the tweeters into a system. Use components and wiring appropriate for a 4-ohm high-frequency speaker circuit.\u003c\/p\u003e\u003cp\u003eMemphis equips the MJPT35 with a neodymium magnet to keep the tweeter assembly compact. A billet phase plug is part of the driver design, while gold-plated compression terminals provide a secure speaker-wire connection. The threaded body mounting design is intended to simplify installation in custom panels and other suitable mounting locations.\u003c\/p\u003e\u003cp\u003eThe MOJO Pro platform is described by Memphis as water-resistant and suitable for demanding outdoor-oriented audio applications. The MJPT35 is sold as a pair, making it appropriate for left- and right-channel placement. It can be used as part of a new component build or as a high-frequency upgrade alongside compatible midrange drivers and amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm Bullet Tweeters:\u003c\/strong\u003e Compact dedicated drivers for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Rating:\u003c\/strong\u003e Supports amplifier matching for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car audio speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e108 dB Sensitivity:\u003c\/strong\u003e Efficient design suited to high-output systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBillet Phase Plug:\u003c\/strong\u003e Integrated element in the bullet-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded Body Mount:\u003c\/strong\u003e Helps simplify secure custom-panel installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPT35 uses a compact neodymium-magnet motor structure, billet phase plug, and gold-plated compression terminals. Its threaded-body format is designed for a clean, secure mounting approach. Memphis lists the product without grilles.\u003c\/p\u003e\u003cp\u003eAllow for the specified 1.5-inch mounting depth when selecting a location, and confirm clearance behind the panel before drilling. Install the pair as left and right high-frequency channels in a compatible 4-ohm system, with amplifier output and crossover setup selected to suit the 125-watt RMS rating. The water-resistant MOJO Pro design makes it suitable for vehicle and powersports-oriented installations where exposure can be a consideration.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633184038982,"sku":"MJPT35","price":198.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iJ4evzCeL.jpg?v=1784410719"},{"product_id":"memphis-mload-non-chrysler-load-generator-kit","title":"Memphis MLOAD Non-Chrysler Load Generator Kit","description":"\u003cp\u003eThe Memphis MLOAD is a load-generator kit for integrating upgraded speakers with select factory-amplified vehicle audio systems. It is intended for non-Chrysler vehicles where the factory amplifier may require a speaker-load simulation after the original speakers are removed. The kit helps address distortion and other audio-quality issues that can occur when an OEM amplifier does not see its expected load.\u003c\/p\u003e\u003cp\u003eThis accessory is designed for installers and vehicle owners upgrading factory speakers while retaining the original radio and amplifier. It is not a speaker, amplifier, or line output converter; it is a supporting OEM-integration component. The MLOAD can be useful when the factory system needs an added load generator as part of the speaker-upgrade plan.\u003c\/p\u003e\u003cp\u003eRather than changing the tonal character of the system directly, the MLOAD supports more consistent operation from the factory amplifier. Its role is to help the amplifier continue operating properly when a vehicle's original speaker load is no longer present. This makes it a practical solution for system upgrades that preserve factory electronics.\u003c\/p\u003e\u003cp\u003eMemphis packages the MLOAD as a two-piece load-generator kit, allowing it to support installations that require more than one load point. The product is specifically identified by Memphis as a non-Chrysler load generator. Chrysler, Dodge, Jeep, and Maserati applications use separately designated Memphis MLOAD20 or MLOAD60 products instead.\u003c\/p\u003e\u003cp\u003eThe MLOAD fits into an OEM-audio upgrade path alongside replacement speakers, integration devices, amplifiers, and signal processors when the vehicle application calls for a load generator. Proper application selection is important because factory amplifier designs vary by vehicle and trim level. Confirm the vehicle's factory-system requirements before purchase or installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Load Simulation:\u003c\/strong\u003e Helps provide the load some factory amplifiers require after speaker replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Chrysler Application:\u003c\/strong\u003e Designed by Memphis for non-Chrysler vehicle applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Generator Kit:\u003c\/strong\u003e Includes two load generators for the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory Amplifier Support:\u003c\/strong\u003e Intended for upgrades retaining the original factory amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDistortion Prevention Support:\u003c\/strong\u003e Helps address distortion associated with missing factory speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Integration Accessory:\u003c\/strong\u003e Complements compatible speaker and OEM-audio integration upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MLOAD is a purpose-built OEM-integration accessory rather than a visible audio component. Memphis identifies it as a load-generator kit and includes two generators in the package. Manufacturer material, housing dimensions, and electrical load value are not published for the MLOAD model.\u003c\/p\u003e\u003cp\u003eUse the MLOAD only where a vehicle's factory amplified audio system requires a load generator during a speaker upgrade. Installation should be planned around the specific vehicle, factory amplifier, and replacement-speaker configuration. Verify that the vehicle is not a Chrysler, Dodge, Jeep, or Maserati application before selecting this MLOAD model.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633184104518,"sku":"MLOAD","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71vUY9c9bwL.jpg?v=1784410746"},{"product_id":"memphis-mload20-20-ohm-load-generator","title":"Memphis MLOAD20 20-Ohm Load Generator","description":"\u003cp\u003eThe Memphis MLOAD20 is a 20-ohm load-generator kit designed for select 2018 and newer non-amplified Chrysler-platform vehicles. It supports factory-speaker replacement projects where the vehicle's original audio system may require an added load to operate properly. The kit is intended for Chrysler, Dodge, Jeep, and Maserati applications.\u003c\/p\u003e\u003cp\u003eWhen factory speakers are upgraded, some modern vehicle audio systems can react poorly to a changed speaker load. The MLOAD20 is designed to help address potential distortion and audio-quality issues associated with that situation. It is a system-integration accessory rather than a speaker, amplifier, or signal processor.\u003c\/p\u003e\u003cp\u003eThis product does not create or amplify audio on its own. Instead, it provides a 20-ohm load for applicable vehicle audio installations. It is a practical choice for installers and vehicle owners planning compatible factory-speaker upgrades.\u003c\/p\u003e\u003cp\u003eThe MLOAD20 is specifically designated for 2018 and newer non-amplified vehicles. Confirm that the vehicle has the appropriate non-amplified factory audio configuration before purchase. Amplified factory systems may require a different load-generator solution.\u003c\/p\u003e\u003cp\u003eEach MLOAD20 package includes two load generators for a paired installation. It can be incorporated during a speaker upgrade while retaining the factory radio and original system layout. Professional installation is recommended when vehicle audio-system configuration is uncertain.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20-Ohm Load:\u003c\/strong\u003e Provides the specified resistance for compatible factory-system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Amplified Vehicle Design:\u003c\/strong\u003e Intended for applicable factory non-amplified audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2018 And Newer Compatibility:\u003c\/strong\u003e Designed for select newer Chrysler-platform vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Generator Kit:\u003c\/strong\u003e Includes two load generators in one package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Upgrade Support:\u003c\/strong\u003e Helps address issues that can follow factory speaker replacement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Radio Retention:\u003c\/strong\u003e Supports upgrades that keep the factory audio source.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MLOAD20 is a compact vehicle-audio integration accessory built around a specified 20-ohm load. Its application-specific design targets select Chrysler, Dodge, Jeep, and Maserati vehicles with non-amplified factory systems. Two load generators are supplied as a kit for compatible installations.\u003c\/p\u003e\u003cp\u003eVerify the vehicle year, make, model, and factory audio configuration before installation. Use the MLOAD20 only where its non-amplified-system application is appropriate, and follow the supplied installation documentation. For factory-system diagnosis, speaker replacement, or wiring questions, installation by a qualified car-audio professional is advisable.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633184170054,"sku":"MLOAD20","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71xEe21F9pL.jpg?v=1784410772"},{"product_id":"memphis-mload60-60-ohm-load-generator","title":"Memphis MLOAD60 60-Ohm Load Generator","description":"\u003cp\u003eThe Memphis MLOAD60 is a 60-ohm load generator kit designed for factory-audio integration in select late-model vehicles. It helps provide the load an OEM amplified audio system may expect when factory speakers are upgraded or replaced. This can help address distortion and other audio-quality concerns associated with a factory amplifier detecting changed speaker loads.\u003c\/p\u003e\u003cp\u003eThis accessory is intended for installers and vehicle owners retaining the factory amplified sound system while changing speakers. It is specified for 2018 and newer amplified Chrysler-platform vehicles, including Dodge, Chrysler, Jeep, and Maserati applications. It is not a speaker, amplifier, or signal processor, and it does not produce audio on its own.\u003c\/p\u003e\u003cp\u003eThe MLOAD60 is engineered around a 60-ohm load-generator design for the applicable OEM audio environment. Rather than changing the character of the sound system, it supports proper integration between the retained factory amplifier and an upgraded speaker installation. This makes it a focused solution for systems where OEM amplifier behavior must be considered during a speaker upgrade.\u003c\/p\u003e\u003cp\u003eEach MLOAD60 kit includes two load generators for use in an appropriate installation. The pair format supports common integration needs when modifying factory speaker circuits. Vehicle equipment can vary, so application should be confirmed against the vehicle's factory amplified audio configuration before purchase.\u003c\/p\u003e\u003cp\u003eUse the MLOAD60 as part of a planned OEM speaker-upgrade path, alongside compatible replacement speakers and any required vehicle-specific installation hardware. It is designed for amplified Chrysler, Dodge, Jeep, and Maserati vehicles from 2018 forward. Professional installation is recommended when working with factory amplified speaker wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e60-Ohm Load:\u003c\/strong\u003e Provides a 60-ohm load-generator solution for compatible factory systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplified-System Support:\u003c\/strong\u003e Intended for vehicles equipped with an OEM amplified audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2018+ Compatibility:\u003c\/strong\u003e Specified for applicable vehicles from model year 2018 onward.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChrysler-Platform Fitment:\u003c\/strong\u003e Designed for Chrysler, Dodge, Jeep, and Maserati applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Unit Kit:\u003c\/strong\u003e Includes two load generators in each package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Integration:\u003c\/strong\u003e Helps support speaker upgrades while retaining the factory amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MLOAD60 is a compact electronic load-generator accessory built for car-audio integration rather than as a visible cabin component. Its 60-ohm design is dedicated to the requirements identified for compatible amplified Chrysler-platform vehicles. The kit contains two load generators for installation use.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle is a 2018 or newer Chrysler, Dodge, Jeep, or Maserati with an amplified factory audio system before selecting this model. Install it as part of the speaker-upgrade wiring plan, following applicable vehicle and product instructions. If the vehicle has a non-amplified system or is outside the specified vehicle group, use the appropriate load-generator model instead.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633184202822,"sku":"MLOAD60","price":19.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Dn1bl7ArL.jpg?v=1784410821"},{"product_id":"memphis-mm1024-10-marine-subwoofer-with-rgb-leds","title":"Memphis MM1024 10\" Marine Subwoofer with RGB LEDs","description":"\u003cp\u003eThe Memphis MM1024 is a 10-inch marine-grade subwoofer designed to add low-frequency output to boat and powersports audio systems. It is intended for installations exposed to sun, moisture, vibration, and changing outdoor conditions. Integrated RGB LED lighting in the cone and grille adds illumination for nighttime use.\u003c\/p\u003e\u003cp\u003eThis passive subwoofer is suited to listeners who want a dedicated bass driver rather than relying on full-range speakers for low frequencies. Its selectable 2-ohm or 4-ohm impedance gives an installer flexibility when matching an amplifier and planning a future system expansion. The MM1024 is rated for 300 watts RMS and 600 watts peak power.\u003c\/p\u003e\u003cp\u003eMemphis FLEX selectable impedance technology allows the subwoofer to be configured for either a 2-ohm or 4-ohm load. This can simplify amplifier matching without replacing the subwoofer when a system changes. Confirm the amplifier's stable impedance rating before wiring the subwoofer.\u003c\/p\u003e\u003cp\u003eThe MM1024 uses a UV-resistant polypropylene cone, a high-temperature ABS plastic basket, and gold-plated terminals. These materials are selected for marine and powersports environments where corrosion resistance and durability are important. A UV-resistant high-impact gray grille is included to protect the front of the subwoofer.\u003c\/p\u003e\u003cp\u003eFor a single-sub installation, the manufacturer lists sealed and vented enclosure recommendations. The 10-inch format can fit purpose-built marine enclosures, custom powersports panels, and other installations with adequate mounting clearance. Optional black and white replacement grilles are available separately for alternate system styling.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Choose 2-ohm or 4-ohm operation to suit the amplifier and wiring plan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Backlit cone and grille lighting add visible accent illumination after dark.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Power Handling:\u003c\/strong\u003e Supports a properly matched amplifier rated for continuous subwoofer output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Helps the cone withstand prolonged outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Temperature ABS Basket:\u003c\/strong\u003e Provides a corrosion-resistant structural frame for marine-oriented installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Gray Grille:\u003c\/strong\u003e Supplies front protection with a UV-resistant high-impact design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MM1024 combines a translucent polypropylene cone with an ABS plastic basket and a gunmetal-gray protective grille. Its gold-plated terminals are intended to support reliable electrical connections in marine and powersports systems. The cone and grille incorporate RGB lighting, while optional white and black grilles are offered separately.\u003c\/p\u003e\u003cp\u003eVerify the 9.37-inch cutout requirement, 4.567-inch mounting depth, and enclosure volume before cutting a mounting surface. For a single subwoofer, Memphis lists a 0.8-cubic-foot sealed enclosure or a 1.4-cubic-foot vented enclosure tuned to 38 Hz. Set the selectable impedance to match a compatible amplifier, and use the included grille where front-side driver protection is needed.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633185251398,"sku":"MM1024","price":199.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71YLgft-EPL.jpg?v=1784410872"}],"url":"https:\/\/audiowatt.store\/collections\/memphis.oembed?page=7","provider":"Audio Watt Store","version":"1.0","type":"link"}