{"title":"Loaded Subwoofer Enclosures","description":null,"products":[{"product_id":"cerwin-vega-xe12dv-dual-12-loaded-vented-enclosure","title":"Cerwin-Vega XE12DV Dual 12\" Loaded Vented Enclosure","description":"\u003cp\u003eThe Cerwin-Vega XE12DV is a loaded car-audio subwoofer enclosure designed to add low-frequency output without requiring you to choose and build a separate subwoofer box. It combines two 12-inch XED Series subwoofers in a factory-tuned vented enclosure. This makes it a practical option for vehicle owners seeking a ready-to-install bass upgrade.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for use with an external car-audio amplifier and is specified with a 2-ohm nominal impedance. Its 450-watt RMS power rating gives shoppers a useful target when selecting an amplifier. The XE12DV is suited to systems where strong bass presence is desired while retaining a straightforward enclosure-based installation.\u003c\/p\u003e\u003cp\u003eThe vented cabinet design is engineered to support efficient low-frequency performance from the dual subwoofers. With a listed frequency response of 20 Hz to 500 Hz, it is intended to cover the bass range rather than reproduce full-range audio. It can complement factory or aftermarket speakers by handling the low-end portion of the system.\u003c\/p\u003e\u003cp\u003eEach loaded subwoofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, ferrite magnet, and dual voice coils. These materials form the core of the XED Series woofer design used in this enclosure. The cabinet is built from 3\/4-inch MDF and finished in black carpet for a conventional trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eThe XE12DV provides a single spring-post terminal connection for the enclosure. Cerwin-Vega's installation guide recommends an amplifier rated from 250 to 500 watts RMS and a minimum of 16-gauge speaker wire, with 14-gauge preferred. Secure mounting is important so the enclosure remains stable during operation in a vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Subwoofers:\u003c\/strong\u003e Two preloaded XED Series woofers provide a complete bass enclosure solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e450W RMS Handling:\u003c\/strong\u003e Supports amplifier matching within the manufacturer's recommended 250 to 500 watt RMS range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Load:\u003c\/strong\u003e Designed for connection to a compatible 2-ohm-stable car-audio amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Enclosure:\u003c\/strong\u003e The factory-tuned ported cabinet supports low-frequency output and airflow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMDF Cabinet Construction:\u003c\/strong\u003e A 3\/4-inch medium-density fiberboard enclosure provides a solid mounting structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring-Post Terminal:\u003c\/strong\u003e A single enclosure terminal offers a straightforward speaker-wire connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XE12DV uses a hatchback-style enclosure with an angled back, black carpet exterior, and factory-embroidered Cerwin-Vega branding. Its loaded woofers use polypropylene cones, treated-foam surrounds, stamped-steel baskets, and ferrite magnets. Mesh grilles are included to help protect the front of the subwoofers.\u003c\/p\u003e\u003cp\u003ePlace the enclosure in a suitable trunk or cargo area and secure it before use, as recommended in the installation guide. Connect the spring-post terminal to an external amplifier with correct polarity, using at least 16-gauge wire; 14-gauge wire is preferred. Match the amplifier carefully to the enclosure's 2-ohm nominal impedance and 450-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45620439941190,"sku":"CER-XE12DV","price":338.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61SDxwzlQdL.jpg?v=1784370943"},{"product_id":"cerwin-vega-cer-xed12sv-12-loaded-vented-subwoofer","title":"Cerwin-Vega CER-XED12SV 12\" Loaded Vented Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega XE12SV is a loaded 12-inch car subwoofer enclosure designed to add low-frequency output to an existing vehicle audio system. It combines one XED Series subwoofer with a prebuilt vented enclosure, reducing the need to select and build a separate subwoofer box. The 2-ohm final impedance is intended for use with a compatible external mono or subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want a compact, ready-to-install bass upgrade for a car or SUV. Its single 12-inch driver provides a practical alternative to assembling individual subwoofer, enclosure, and terminal components. The angled hatchback-style cabinet is designed for vehicle cargo-area placement.\u003c\/p\u003e\u003cp\u003eThe XE12SV is rated for 225 watts RMS and 800 watts maximum power handling. Its vented enclosure design supports strong bass output with the appropriate amplifier setup. Cerwin-Vega specifies a 20 Hz to 500 Hz frequency response range for the loaded system.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, and ferrite magnet motor structure. A 2-inch voice coil and single-coil configuration support the enclosure's 2-ohm nominal impedance. The enclosure is constructed from 3\/4-inch MDF and finished in black carpet.\u003c\/p\u003e\u003cp\u003eFor a complete system, pair the XE12SV with an amplifier that is stable at 2 ohms and matched appropriately to its RMS power rating. The manufacturer installation guide recommends an amplifier in the 250 to 500 watt RMS range and at least 16-gauge speaker wire between the amplifier and enclosure. Secure the enclosure in the vehicle cargo area to help prevent movement during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes one XED Series 12-inch subwoofer in a prebuilt cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e225W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for compatible 2-ohm-stable subwoofer amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Cabinet:\u003c\/strong\u003e Uses a ported enclosure layout for bass-focused vehicle audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for everyday car-audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled Hatchback Design:\u003c\/strong\u003e Helps the enclosure fit common car and SUV cargo areas.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XE12SV uses a 3\/4-inch MDF enclosure with a black carpet finish. Its driver combines a polypropylene cone, treated-foam surround, ferrite magnet, and stamped-steel basket. The cabinet contains a single subwoofer and uses spring-post speaker terminals.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure cargo-area location with sufficient clearance for the cabinet dimensions of 15.7 by 12.3 by 14.3 inches. Connect amplifier output to the enclosure terminals with correct polarity; the manufacturer specifies 16-gauge wire minimum and prefers 14-gauge wire. Use an external amplifier compatible with the enclosure's 2-ohm nominal impedance.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45620506591302,"sku":"CER-XED12SV","price":253.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71x9ZBWch6L.jpg?v=1784370987"},{"product_id":"gravity-g12bd2-dual-12-ported-loaded-subwoofer-enclosure","title":"Gravity G12BD2 Dual 12\" Ported Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe Gravity G12BD2 is a dual 12-inch loaded car-subwoofer enclosure designed to add low-frequency output to a vehicle audio system without building a custom box. Its two subwoofers are pre-installed in a ported enclosure and wired to an 8-ohm final load. This makes it a practical option for installers seeking a ready-made enclosure format.\u003c\/p\u003e\u003cp\u003eThe enclosure is rated for 800 watts RMS and 1,600 watts peak power handling. Its published frequency-response range is 30 Hz to 1.5 kHz, with the ported enclosure tuned to 30 Hz. The design is intended to emphasize low-bass reproduction in a trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eGravity identifies the G12BD2 as part of its Warzone Series. The system uses two 12-inch drivers in a vented, wedge-style enclosure with 4.00 cubic feet of stated air space. The pre-wired 8-ohm configuration helps define the amplifier load that the rest of the system must support.\u003c\/p\u003e\u003cp\u003eThe enclosure uses heavy-duty MDF construction, giving the assembled unit a rigid cabinet structure for its installed drivers. At 34.5 inches wide, 19.5 inches high, and 18.75 inches deep, it is suited to vehicles with sufficient cargo-space clearance. Measure the intended location and account for space around the enclosure before purchase.\u003c\/p\u003e\u003cp\u003eOnline listings describe the G12BD2 inconsistently as both a loaded enclosure and an active powered enclosure. The confirmed technical details specify pre-loaded subwoofers and an 8-ohm final impedance, but do not publish amplifier specifications. Confirm the supplied amplification configuration and connection requirements with the retailer before planning the wiring installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Configuration:\u003c\/strong\u003e Uses two pre-installed 12-inch subwoofers in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Rating:\u003c\/strong\u003e Supports up to 800 watts RMS power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,600W Peak Rating:\u003c\/strong\u003e Provides a published 1,600-watt peak power-handling rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Ohm Final Load:\u003c\/strong\u003e Pre-wired enclosure presents an 8-ohm final impedance load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Cabinet:\u003c\/strong\u003e Vented enclosure is tuned to 30 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty MDF:\u003c\/strong\u003e MDF enclosure construction provides a durable cabinet foundation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G12BD2 uses a wedge-style, ported enclosure made from heavy-duty MDF. Its stated internal air space is 4.00 cubic feet, and the ported layout is tuned to 30 Hz. The two subwoofers arrive pre-loaded in the enclosure and are listed with single voice coils.\u003c\/p\u003e\u003cp\u003ePlan installation around the enclosure's 34.5 x 19.5 x 18.75-inch dimensions and confirm that the vehicle has adequate cargo-area clearance. Match the system to the enclosure's stated 8-ohm final load and 800-watt RMS rating. Because published listings conflict on whether amplification is integrated, verify the exact package contents, wiring requirements, and required accessories with the selling retailer before installation.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625883263046,"sku":"G12BD2","price":338.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81bTHYUi_uL.jpg?v=1784374334"},{"product_id":"hertz-mpbx-250-s2-10-sealed-loaded-subwoofer-enclosure","title":"Hertz MPBX 250 S2 10\" Sealed Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe Hertz MPBX 250 S2 is a loaded 10-inch passive subwoofer enclosure designed for vehicle systems that need meaningful bass output without requiring a large box. Its sealed, ultra-shallow enclosure format helps it fit where conventional subwoofer enclosures may be impractical. It is built around the 2-ohm MPS 250 S2 shallow subwoofer platform.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners building a compact amplified subwoofer system in cars, trucks, and other vehicles with limited installation height. With 500 watts continuous power handling and a 2-ohm nominal impedance, it should be paired with an amplifier that is stable at 2 ohms and appropriately power-matched. Its specified frequency response is 25 to 400 Hz.\u003c\/p\u003e\u003cp\u003eThe MPBX 250 S2 uses a sealed cabinet to provide a controlled bass foundation in a compact footprint. Hertz specifies a polypropylene cone, a single 38 mm voice coil, and a high-density flux ferrite magnet in the loaded subwoofer. The shallow enclosure measures 160 mm deep externally, helping accommodate under-seat and other low-clearance applications.\u003c\/p\u003e\u003cp\u003eIts enclosure construction uses 15 mm wood panels, panel-to-panel internal bracing, solid corners, and internal sound-absorbing material. These elements are designed to limit cabinet resonances while supporting the enclosed driver. Rounded cabinet corners also make placement easier in tighter vehicle spaces.\u003c\/p\u003e\u003cp\u003eHertz 2S² (2 Sides\/2 Sounds) design supports either up-firing or down-firing placement. The supplied leveling feet use hook-and-loop inserts for down-firing installation, while the SSP Sub Smart Plug system provides a removable Plug-\u0026amp;-Play terminal block alongside traditional push terminals. A screw-less mesh grille is included to help protect the driver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Enclosure:\u003c\/strong\u003e A 160 mm external depth supports installations with limited available height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Continuous Handling:\u003c\/strong\u003e Supports amplifier matching for substantial low-frequency system output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Loaded Design:\u003c\/strong\u003e Uses a single 2-ohm shallow 10-inch subwoofer configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation Options:\u003c\/strong\u003e Allows up-firing or down-firing placement to suit the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Wood Cabinet:\u003c\/strong\u003e 15 mm wood panels and internal bracing help control enclosure resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSP Connection System:\u003c\/strong\u003e Combines a removable Plug-\u0026amp;-Play block with traditional push terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPBX 250 S2 combines a polypropylene-cone subwoofer with a high-density flux ferrite magnet in a rigid sealed box. Its cabinet includes 15 mm wood construction, internal sound-absorbing material, panel-to-panel bracing, solid corners, and rounded exterior corners. The included mesh grille has an adjustable logo position for installation orientation.\u003c\/p\u003e\u003cp\u003eMeasure the available space before installation using the 531 x 160 x 361 mm overall dimensions. For down-firing use, install the supplied leveling feet with their hook-and-loop inserts on a suitable carpeted surface; up-firing can be used when that placement better suits the system. Connect the enclosure to a compatible 2-ohm-stable subwoofer amplifier using either the SSP Plug-\u0026amp;-Play terminal block or the conventional push terminals, and secure the enclosure so it cannot move while driving.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631786057798,"sku":"MPBX250S2-1","price":707.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81gf7kAFBPL.jpg?v=1784382818"},{"product_id":"jbl-jblsubcb1000ssl-10-shallow-loaded-subwoofer-enclosure","title":"JBL JBLSUBCB1000SSL 10\" Shallow Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe JBL Club 1000SSL is a compact loaded subwoofer enclosure designed to add low-frequency output where vehicle space is limited. It combines a single 10-inch shallow aluminum driver with an integrated passive radiator in a prebuilt enclosure. This makes it a practical option for drivers who want a finished bass solution rather than sourcing a separate subwoofer and box.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a sealed, down-firing layout intended to deliver controlled bass response while keeping the cabinet profile low. Its specified frequency response is 35Hz to 400Hz at -6dB, supporting sub-bass and upper-bass reinforcement in a car audio system. With a 2-ohm nominal impedance, it is designed to connect to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThe Club 1000SSL is rated to handle 350 watts RMS and 1,050 watts peak. Its 82.5dB sensitivity rating is measured at 1W\/1m, and it uses a 2-inch voice coil. These specifications provide clear amplifier-matching reference points when planning a system upgrade.\u003c\/p\u003e\u003cp\u003eJBL builds the enclosure from 3\/4-inch MDF and covers it in black carpet for everyday vehicle use. The cabinet measures only 4-1\/2 inches high, helping it fit in locations where a conventional subwoofer box may be impractical. A down-firing driver arrangement helps keep the woofer integrated into the enclosure design.\u003c\/p\u003e\u003cp\u003eRemovable feet allow the enclosure to be positioned in different orientations to suit available cargo-area space. The included removable JBL logo badge can be installed where desired, while the supplied steel plates and hardware support secure mounting. Use the Club 1000SSL as the bass section of an amplified car audio system with an amplifier that is appropriate for its 2-ohm load and power-handling rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Aluminum Driver:\u003c\/strong\u003e A shallow 250mm subwoofer is preinstalled in the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDown-Firing Sealed Design:\u003c\/strong\u003e Keeps the driver facing downward in a compact sealed cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Passive Radiator:\u003c\/strong\u003e Works with the enclosure design to support low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Provides a clear continuous-power target for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Feet:\u003c\/strong\u003e Allow flexible enclosure orientation for available vehicle space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Lets you choose where to place the JBL branding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 1000SSL uses 3\/4-inch (18mm) MDF construction with a rugged black carpet covering. Its shallow cabinet measures 24-7\/8 inches wide, 4-1\/2 inches high, and 13-1\/8 inches deep. The enclosure includes a down-firing subwoofer, passive radiator, removable feet, removable badge, and supplied mounting hardware.\u003c\/p\u003e\u003cp\u003eConnect the enclosure's positive and negative terminals to an external amplifier while observing correct polarity. JBL specifies at least 4mm² (11 AWG) speaker wire for the enclosure connection, and the enclosure should be securely mounted where it will not obstruct cargo, folding seats, or the trunk lid. Confirm adequate clearance and avoid routing hardware or wiring near vehicle brake lines, fuel lines, or wiring harnesses.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632227606598,"sku":"JBLSUBCB1000SSL","price":460.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71s2OBp8zML.jpg?v=1784398494"},{"product_id":"jbl-club-1200ssl-12-shallow-loaded-subwoofer-enclosure","title":"JBL Club 1200SSL 12\" Shallow Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe JBL Club 1200SSL is a loaded 12-inch shallow subwoofer enclosure designed to add low-frequency output where cargo space is limited. Its low-profile enclosure is suited to vehicle installations that cannot accommodate a conventional full-depth subwoofer box. The enclosure comes loaded and ready to connect to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis model uses a down-firing sealed enclosure design with a passive radiator and a 12-inch aluminum driver. JBL rates it at 400 watts RMS and 1,200 watts peak power handling at a nominal 2-ohm impedance. The specified frequency response is 30Hz to 400Hz at -6dB.\u003c\/p\u003e\u003cp\u003eThe down-firing arrangement places the active subwoofer beneath the enclosure, helping protect the driver in everyday cargo-area use. A passive radiator supports bass performance without requiring a large ported enclosure. This approach is intended for listeners who want a compact bass upgrade with controlled, accurate low-frequency reproduction.\u003c\/p\u003e\u003cp\u003eWith a height of just 4-7\/8 inches, the Club 1200SSL can work in space-conscious vehicle layouts. Removable feet allow the enclosure to be positioned for the available space and preferred orientation. The removable JBL logo badge also gives installers flexibility in how the enclosure is presented after installation.\u003c\/p\u003e\u003cp\u003eThe Club 1200SSL is a passive subwoofer enclosure, so it should be paired with an amplifier that is compatible with its 2-ohm nominal load and 400-watt RMS rating. It can be used as the bass foundation in an aftermarket audio system alongside a factory or aftermarket head unit and appropriate amplifier integration. JBL specifies at least 4 mm² (11 AWG) speaker wire for connections to the enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Aluminum Driver:\u003c\/strong\u003e Provides a purpose-built low-frequency driver in a compact loaded enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous 400-watt RMS rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDown-Firing Sealed Design:\u003c\/strong\u003e Places the active driver under the enclosure for a protected, space-conscious layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Radiator:\u003c\/strong\u003e Supports bass output without the space requirements of a conventional port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Feet:\u003c\/strong\u003e Allow flexible placement direction to suit available vehicle space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Lets installers position the JBL badge where it suits the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is built from 3\/4-inch (18mm) medium-density fiberboard with a rugged black carpet covering. Its shallow cabinet measures 27-5\/8 inches wide, 14-5\/8 inches deep, and 4-7\/8 inches high. The down-firing layout, removable feet, and removable logo badge support a clean, adaptable installation.\u003c\/p\u003e\u003cp\u003eConnect the enclosure's positive and negative terminals to the speaker outputs of a compatible amplifier, observing correct polarity. JBL specifies speaker wire of at least 4 mm² (11 AWG) for enclosure connections. Secure the enclosure to a suitable mounting surface in a cargo or trunk area that does not interfere with cargo, fold-down seats, or trunk-lid operation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632281247814,"sku":"JBLSUBCB1200SSL","price":524.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81nl61SocEL.jpg?v=1784399002"},{"product_id":"memphis-mjme8s1v2-8-loaded-ported-subwoofer-enclosure","title":"Memphis MJME8S1V2 8\" Loaded Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Memphis MJME8S1V2 is a loaded ported enclosure built around one 8-inch MOJO Mini subwoofer. It provides a ready-to-install bass solution for vehicles where adding low-frequency output without designing a custom enclosure is the goal. Its 1-ohm final impedance is intended for use with a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want a compact single-subwoofer upgrade for a car or truck audio system. The ported cabinet is designed to support strong low-frequency output, with a confirmed frequency response of 38-150 Hz. It handles 900 watts RMS and 1,800 watts peak power.\u003c\/p\u003e\u003cp\u003eThe installed MOJO Mini subwoofer uses a vented cast-aluminum basket, a fiberglass-reinforced dust cap, and a VGroove rubber surround. A 4-layer copper 2-inch voice coil and heat-dissipating aluminum heat sink help manage heat during demanding playback. Memphis also specifies DVVC Direct Vent Voice Coil Cooling for additional voice-coil ventilation.\u003c\/p\u003e\u003cp\u003eThe MJME8S1V2 combines its bass system with a finished enclosure that is practical for visible cargo-area installations. Its carpet-wrapped cabinet and piano-black gloss front panel provide a clean appearance while the ported design supports the subwoofer's output range. The enclosure has one 8-inch woofer and a single 1-ohm final load.\u003c\/p\u003e\u003cp\u003eUse this loaded enclosure as the bass section of a system with an external amplifier that is stable at 1 ohm and appropriately power matched. Confirm the available cargo or behind-seat space before purchase, especially the enclosure's 20.7-inch width and 16.2-inch bottom depth. A properly selected amplifier, wiring kit, and secure mounting arrangement are required for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 8-Inch MOJO Mini Subwoofer:\u003c\/strong\u003e Provides a complete bass enclosure with one installed subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900W RMS Power Handling:\u003c\/strong\u003e Supports substantial continuous power with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Impedance:\u003c\/strong\u003e Designed for an amplifier rated to operate at 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Supports bass output across its specified operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Layer Copper Voice Coil:\u003c\/strong\u003e Uses a 2-inch coil built for heat management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiano-Black Front Panel:\u003c\/strong\u003e Adds a gloss-finished visual detail to the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJME8S1V2 uses a carpet-wrapped, ported enclosure with a piano-black gloss finished front panel. The cabinet is listed with 3\/4-inch medium-density fiberboard construction, while the subwoofer uses a vented cast-aluminum basket, fiberglass-reinforced dust cap, VGroove rubber surround, and aluminum heat sink.\u003c\/p\u003e\u003cp\u003eMeasure the intended installation area before ordering: the enclosure is 20.7 inches wide, 12.7 inches high, 13.7 inches deep at the top, and 16.2 inches deep at the bottom. Wire the spring-post input to an external amplifier that is stable at the enclosure's 1-ohm load; the terminals accept up to 10-gauge speaker wire. Secure the enclosure to prevent movement during driving and keep the port unobstructed.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633178959942,"sku":"MJME8S1V2","price":379.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-DYYHU34L.jpg?v=1784409469"},{"product_id":"memphis-mjpe12d1-dual-12-1-ohm-loaded-enclosure","title":"Memphis MJPE12D1 Dual 12\" 1-Ohm Loaded Enclosure","description":"\u003cp\u003eThe Memphis MJPE12D1 is a preloaded dual 12-inch subwoofer enclosure for vehicle audio systems that need substantial low-frequency output without building a custom box. It combines two subwoofers and a ported enclosure in one ready-to-install assembly. Its 1-ohm nominal load is intended for a compatible external subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to drivers with enough cargo-area space for a full-size dual-subwoofer system. The front-ported design is tuned to 34 Hz, giving the system a low-bass-focused character. It can be a practical upgrade for a factory or aftermarket stereo when paired with the appropriate amplifier and integration hardware.\u003c\/p\u003e\u003cp\u003eThe MJPE12D1 is rated for 1,500 watts RMS and 3,000 watts peak power handling. Those ratings describe the complete loaded enclosure rather than an individual subwoofer. For dependable operation, amplifier setup should be matched to the enclosure's 1-ohm impedance and RMS rating.\u003c\/p\u003e\u003cp\u003eIts enclosure is constructed from 100% MDF and finished in custom-stitched carpet. A front load port supports the ported enclosure design, while a high-current nickel-plated compression terminal provides the connection point. These details help make the enclosure suitable for conventional trunk, hatch, or cargo-area installations where its dimensions can be accommodated.\u003c\/p\u003e\u003cp\u003eThe integrated subwoofers use black polypropylene dust caps, woven tinsel leads, and high-temperature BASV voice coil formers. These construction details support the enclosure's intended high-power bass role. The MJPE12D1 can serve as the bass foundation of a system with an aftermarket monoblock amplifier, wiring kit, and signal integration appropriate for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Configuration:\u003c\/strong\u003e Two preinstalled 12-inch subwoofers provide a complete bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with a compatible 1-ohm-stable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Load Port:\u003c\/strong\u003e Ported design is tuned to 34 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% MDF Enclosure:\u003c\/strong\u003e Provides a rigid enclosure structure for the installed subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNickel-Plated Compression Terminal:\u003c\/strong\u003e Offers a dedicated high-current speaker-wire connection point.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJPE12D1 uses a 100% MDF enclosure with a custom-stitched carpet exterior. Its front port, black polypropylene dust caps, and woven tinsel leads are part of the integrated design. The enclosure measures 34.65 inches long, 15.15 inches high, 12.6 inches deep at the top, and 17.72 inches deep at the bottom.\u003c\/p\u003e\u003cp\u003eConfirm the available cargo-space dimensions before purchase, including clearance for the front port and wiring at the terminal. Connect it only to an external amplifier that is stable at a 1-ohm load, and set amplifier gain and filtering carefully. An amplifier, wiring, and vehicle-specific signal integration are separate system components and are not identified as included with the enclosure.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633183645766,"sku":"MJPE12D1","price":699.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VU2Ln-8_L.jpg?v=1784410632"},{"product_id":"memphis-prxe12dft-dual-12-ported-loaded-enclosure","title":"Memphis PRXE12DFT Dual 12\" Ported Loaded Enclosure","description":"\u003cp\u003eThe Memphis PRXE12DFT is a preloaded dual 12-inch subwoofer enclosure for adding substantial bass to a car-audio system without designing a separate box and driver combination. It combines two Memphis Power Reference PRXL12FT subwoofers in one front-ported cabinet. This makes it a practical option for listeners who want a single, complete bass enclosure for a trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eThe enclosure is rated for 800 watts RMS and 1,600 watts peak power handling. Its dual 12-inch driver layout is intended to provide strong low-frequency output when paired with an appropriately matched mono amplifier. Because it is already loaded, the buyer can focus on amplifier selection, wiring, and vehicle placement rather than choosing and mounting separate subwoofers.\u003c\/p\u003e\u003cp\u003eEach included PRXL12FT subwoofer uses Memphis FLEX Triple Selectable Impedance technology. The driver impedance can be configured for 1-, 2-, or 4-ohm operation, while the complete enclosure offers 0.5-, 1-, or 2-ohm wiring configurations. This flexibility can help the enclosure work with different compatible amplifier load ratings.\u003c\/p\u003e\u003cp\u003eA front-firing rectangular port is part of the enclosure design, with a plastic port flare at the opening. The port and flare are designed to support vented-box bass output while helping reduce audible port turbulence. The result is a loaded enclosure suited to systems where a ported bass character is preferred.\u003c\/p\u003e\u003cp\u003eRGB lighting is integrated into the woofer cone accents and the Memphis logo on the front of the enclosure. The lighting can be hardwired to a 12-volt source for fixed colors, or used with the separately sold Memphis MXRGBBTC RGB controller for additional control. This lets the enclosure serve as both a bass upgrade and a visible component in a custom audio installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch Loaded Design:\u003c\/strong\u003e Two preinstalled Power Reference subwoofers simplify system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Handling:\u003c\/strong\u003e Supports a properly matched high-output mono amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Offers multiple enclosure load options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Directs port output toward the cabin area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlared Port Opening:\u003c\/strong\u003e Helps reduce turbulence at the port outlet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Illuminates woofer accents and the Memphis front logo.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRXE12DFT is an integrated, ported loaded enclosure with two 12-inch PRXL12FT subwoofers, a front-facing rectangular port, and a molded plastic port flare. The black enclosure presentation is complemented by RGB cone accents and an illuminated Memphis logo. Its tapered cabinet dimensions are listed as 35 inches long, 15.5 inches high, 14 inches top depth, and 16.5 inches bottom depth.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a suitable cargo area and connect its spring-post input with speaker wire up to 10 AWG. Match the amplifier to the selected final enclosure impedance and its 800-watt RMS rating; the default enclosure load is listed as 2 ohms. Changing the enclosure impedance requires removing both subwoofers to access their wiring, and RGB lighting requires a 12-volt power and ground connection or a compatible optional RGB controller.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633199603782,"sku":"PRXE12DFT","price":449.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71g713htWoL.jpg?v=1784414577"},{"product_id":"memphis-prxe12sft-12-rgb-ported-loaded-enclosure","title":"Memphis PRXE12SFT 12\" RGB Ported Loaded Enclosure","description":"\u003cp\u003eThe Memphis PRXE12SFT is a loaded, ported subwoofer enclosure built around a single 12-inch Power Reference woofer. It provides a ready-to-install bass foundation for vehicle audio systems that need low-frequency output without designing a separate enclosure. The compact cabinet format helps simplify a subwoofer upgrade by combining the woofer and enclosure in one assembly.\u003c\/p\u003e\u003cp\u003eThis enclosure is designed for listeners who want a single-subwoofer solution with adaptable amplifier matching. Its FLEX selectable-impedance design supports 1-ohm, 2-ohm, or 4-ohm configurations, allowing the system to be tailored around a compatible mono amplifier. The enclosure is factory configured at 2 ohms, while other impedance selections require access to the woofer wiring.\u003c\/p\u003e\u003cp\u003eWith a 400-watt RMS and 800-watt peak power rating, the PRXE12SFT is intended for an amplifier matched to its continuous power capability and selected load. The front-firing rectangular port directs output toward the cabin. A plastic port flare is used to promote smoother airflow and help reduce audible port noise.\u003c\/p\u003e\u003cp\u003eThe loaded woofer uses an RGB LED cone accent, and the Memphis logo on the baffle is also RGB illuminated. This gives the enclosure a coordinated lighting feature while retaining a conventional carpeted enclosure appearance. The lighting can be hardwired to a 12-volt source or used with a compatible optional RGB controller.\u003c\/p\u003e\u003cp\u003eThe PRXE12SFT fits systems where enclosure space, amplifier load flexibility, and integrated lighting are all considerations. Its trapezoidal cabinet measures 22 inches long by 15.5 inches high, with 14-inch top depth and 16.5-inch bottom depth. A single set of spring-post terminals accepts speaker wire up to 10 AWG for connection to the amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 12-Inch Loaded Design:\u003c\/strong\u003e Combines one subwoofer and a matched ported enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFLEX Selectable Impedance:\u003c\/strong\u003e Supports 1-ohm, 2-ohm, or 4-ohm system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Handling:\u003c\/strong\u003e Provides a continuous-power target for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Directs bass forward through a rectangular vent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlastic Port Flare:\u003c\/strong\u003e Helps smooth airflow and reduce vent noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Illuminates the woofer cone and Memphis logo.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses an MDF cabinet wrapped in black carpet, with a front-firing rectangular port and molded plastic flare. Its loaded PRX-series woofer uses a black polypropylene cone, stitched butyl rubber surround, reinforced spider, woven tinsel leads, and a high-temperature TIL voice-coil former. The cabinet holds one 12-inch woofer and uses a single terminal cup with spring-post speaker connections.\u003c\/p\u003e\u003cp\u003eConfirm the available vehicle space before installation using the listed 22 x 15.5 x 14 x 16.5-inch enclosure dimensions. Match the amplifier to the enclosure's 400-watt RMS rating and the selected 1-, 2-, or 4-ohm load; the factory configuration is 2 ohms. Changing impedance requires removing the woofer to access its wiring, and RGB operation requires the included harness to be connected to 12-volt power and ground or to an optional compatible RGB controller.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633199800390,"sku":"PRXE12SFT","price":299.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/714pB1a-yTL.jpg?v=1784414633"},{"product_id":"pioneer-ts-a2500lb-10-shallow-mount-loaded-subwoofer","title":"Pioneer TS-A2500LB 10\" Shallow-Mount Loaded Subwoofer","description":"\u003cp\u003eThe Pioneer TS-A2500LB is a 10-inch shallow-mount loaded subwoofer enclosure designed to add low-frequency output where installation depth is limited. Its compact sealed enclosure helps make bass reinforcement practical in many trunks, cargo areas, and standard- or extended-cab pickup applications. Because the driver is already installed in its enclosure, it avoids the need to select and build a separate subwoofer box.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer system, so it is intended to connect to a separate external amplifier rather than directly to a head unit's speaker outputs. With 300 watts RMS power handling and a 2-ohm single voice coil, it is suited to a properly matched mono amplifier channel. Pioneer recommends using an amplifier with continuous RMS output below the subwoofer's 300-watt nominal input rating.\u003c\/p\u003e\u003cp\u003eThe TS-A2500LB uses a glass-fiber- and mica-reinforced injection-molded polypropylene cone, commonly called IMPP, to provide a rigid diaphragm for bass reproduction. A rubber surround and aramid-fiber dual-spider design support controlled cone movement. The sealed enclosure design is intended for a compact installation and a controlled bass character.\u003c\/p\u003e\u003cp\u003eIts low-profile cabinet measures 20.875 inches wide, 11.750 inches high, and 5.875 inches deep, allowing placement where a conventional deep subwoofer enclosure may not fit. The enclosure can be installed upright, flat with the driver facing upward, or in a down-firing arrangement. Removable feet and cushions support those different placement options.\u003c\/p\u003e\u003cp\u003eThe TS-A2500LB can be used as the bass foundation of an A-Series speaker upgrade or added to another car audio system that has an appropriate amplifier and subwoofer signal path. Pioneer specifies a 2-ohm nominal impedance, so amplifier compatibility should be checked before installation. A low-pass filter is recommended, with Pioneer identifying 80 Hz at 12 dB per octave as an effective setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-Loaded Sealed Enclosure:\u003c\/strong\u003e Includes the installed 10-inch subwoofer and enclosure for a simplified bass upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a fixed 2-ohm nominal load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced IMPP Cone:\u003c\/strong\u003e Uses glass-fiber and mica reinforcement for cone rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Cabinet:\u003c\/strong\u003e The 5.875-inch-deep enclosure helps fit restricted spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Orientation:\u003c\/strong\u003e Can be mounted upright, upward-firing, or down-firing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A2500LB combines a carpeted enclosure with an embroidered Pioneer logo, a fully covered steel mesh grille, and a 10-inch woofer using a reinforced IMPP cone. Its rubber surround, aramid-fiber dual-spider design, stamped-steel basket, and ferrite magnet are part of the subwoofer construction. The carpeted surface is intended to resist slipping and protect surrounding surfaces from scratches.\u003c\/p\u003e\u003cp\u003eConnect this passive enclosure to an external amplifier using speaker cable thicker than AWG 18; speaker wire is not supplied. Pioneer recommends a low-pass filter at 80 Hz with a 12 dB-per-octave slope, and the enclosure should be securely mounted using the included hardware as appropriate for the vehicle. Four threaded feet, four adhesive cushions, two angle brackets, and eight mounting screws are included for installation flexibility.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633228079174,"sku":"TS-A2500LB","price":292.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/819XjtCjCoL.jpg?v=1784418735"},{"product_id":"rockford-fosgate-p1-1x10-10-ported-loaded-subwoofer","title":"Rockford Fosgate P1-1X10 10\" Ported Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P1-1X10 is a single 10-inch loaded subwoofer enclosure for adding dedicated low-frequency output to a car audio system. It combines a Punch P1S4-10 subwoofer with a prebuilt vented enclosure, eliminating the need to select and build a separate box. The enclosure presents a 4-ohm load to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners who want a ready-to-install bass upgrade in a compact hatchback-style enclosure. Its 250-watt RMS power rating allows it to pair with an amplifier that is stable at 4 ohms and appropriately power-matched. The ported design is intended to provide strong low-frequency output while retaining the convenience of a preloaded enclosure.\u003c\/p\u003e\u003cp\u003eThe P1-1X10 uses a single-voice-coil Punch P1 10-inch woofer with a Kevlar fiber reinforced paper cone. The driver has a 4-ohm nominal impedance and is installed and wired inside the enclosure. With one external terminal connection, system wiring is straightforward once an amplifier and appropriate installation hardware are selected.\u003c\/p\u003e\u003cp\u003eIts enclosure uses 5\/8-inch medium-density fiberboard and a high-density carpet covering for automotive use. A proprietary high-flow, low-noise port is incorporated into the vented cabinet design. High-current binding posts and quick-release compression terminals provide the connection point for speaker wire.\u003c\/p\u003e\u003cp\u003eThe P1-1X10 is a practical fit for an aftermarket system using a separate mono or bridged amplifier channel rated for a 4-ohm speaker load. It is supplied as a passive enclosure, so an amplifier, power wiring, signal connection, and installation hardware are required separately. The angled enclosure profile measures 13.125 inches high by 17 inches wide by 15.125 inches deep.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 10-Inch P1 Woofer:\u003c\/strong\u003e Includes one factory-installed P1S4-10 subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Final Load:\u003c\/strong\u003e Simplifies matching with a compatible 4-ohm amplifier channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250 Watts RMS:\u003c\/strong\u003e Supports continuous power handling up to its rated level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Enclosure:\u003c\/strong\u003e Uses a vented cabinet for low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Provides a rigid enclosure structure for the installed woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompression Terminals:\u003c\/strong\u003e Accept speaker wire up to 10 AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is constructed from 5\/8-inch MDF and covered in high-density automotive carpet. Its hatchback-style cabinet includes a high-flow, low-noise port and high-current binding posts. The loaded driver is the Punch P1S4-10 single 4-ohm voice-coil subwoofer.\u003c\/p\u003e\u003cp\u003eConnect the amplifier's positive speaker output to the enclosure's red terminal and the negative output to the black terminal. Use an amplifier that is compatible with a 4-ohm load and power-match it to the enclosure's 250-watt RMS rating. Secure the enclosure in the vehicle, keep the port unobstructed, and route speaker wire away from high-current vehicle wiring where practical.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634047082566,"sku":"P1-1X10","price":259.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Eh5dMDdRL.jpg?v=1784427763"},{"product_id":"rockford-fosgate-p1-1x12-12-ported-loaded-subwoofer","title":"Rockford Fosgate P1-1X12 12\" Ported Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P1-1X12 is a preloaded 12-inch subwoofer enclosure designed to add low-frequency output to a car audio system without selecting a separate box and woofer. It combines one Punch P1S4-12 single-voice-coil subwoofer with a vented enclosure that is wired for a 4-ohm amplifier load. This makes it a practical option for listeners who want a straightforward bass upgrade from an external amplifier.\u003c\/p\u003e\u003cp\u003eThe ported enclosure is intended to provide strong low-bass output while retaining controlled, musical bass response. With 250 watts RMS and 500 watts maximum power handling, it is suited to systems using a properly matched mono or bridged amplifier stable at 4 ohms. Its 25-250 Hz frequency response covers the bass region typically handled by a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eInside, the P1S4-12 uses a Kevlar-reinforced paper cone, high-density NBR surround, poly-cotton spider, and high-temperature voice coil. The driver also uses spider venting, an extended pole piece, and a vented backplate to support heat management during normal operation. These construction details support a durable subwoofer foundation in a ready-to-install enclosure.\u003c\/p\u003e\u003cp\u003eThe enclosure uses 5\/8-inch MDF, high-density black carpet, a front-firing high-flow port, and high-current connection hardware. Its port design is made to move air efficiently while helping reduce audible port noise. The angled, compact enclosure format is suitable for trunk or cargo-area installations where a self-contained bass solution is preferred.\u003c\/p\u003e\u003cp\u003eThe P1-1X12 requires a separate amplifier, amplifier wiring, and an audio signal connection appropriate for the vehicle's system. Its internally wired 4-ohm load simplifies amplifier matching because there is one enclosure input connection rather than separate voice-coil wiring. It can serve as a first dedicated subwoofer upgrade or as the bass section of a larger Rockford Fosgate system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes one Punch P1S4-12 subwoofer in a finished vented box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Final Load:\u003c\/strong\u003e Internal wiring presents a 4-ohm load to a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250-Watt RMS Handling:\u003c\/strong\u003e Supports properly matched external amplification for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Cabinet:\u003c\/strong\u003e The ported design supports efficient low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Construction:\u003c\/strong\u003e Provides a rigid enclosure structure for the installed woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Terminals:\u003c\/strong\u003e Compression connections accept speaker wire up to 10 AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1-1X12 enclosure is built from 5\/8-inch medium-density fiberboard and finished in high-density black carpet. It houses a single 12-inch Punch P1 driver and uses a proprietary high-flow, low-noise port. The driver incorporates a Kevlar-reinforced paper cone, NBR surround, stamped steel frame, protective PVC motor cover, and a soft-touch trim ring.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a trunk, hatch, or cargo area where its 15.125-inch height, 19.125-inch width, and 15.75-inch depth can be accommodated. Connect the amplifier's positive speaker output to the enclosure's red terminal and its negative output to the black terminal, using appropriately sized speaker cable. Use an external amplifier designed to deliver power safely into a 4-ohm load, and disconnect the vehicle battery's negative terminal before installation.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634052948038,"sku":"P1-1X12","price":289.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71EQwNJq9KL.jpg?v=1784427822"},{"product_id":"rockford-fosgate-p2-1x12-12-ported-loaded-subwoofer","title":"Rockford Fosgate P2-1X12 12\" Ported Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P2-1X12 is a loaded ported subwoofer enclosure built around one 12-inch Punch P2 dual-voice-coil woofer. It provides a straightforward way to add dedicated low-frequency output to a vehicle audio system without designing and building a separate enclosure. The enclosure is internally wired for a 1-ohm nominal amplifier load.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners who want a preloaded bass solution for a trunk, hatch, or cargo-area installation. Its 400-watt RMS power rating gives shoppers a clear target when selecting a compatible mono amplifier. Because it is a passive enclosure, an external amplifier and speaker wiring are required.\u003c\/p\u003e\u003cp\u003eThe vented enclosure design is tuned to support low-frequency extension and higher output than a comparable sealed-box approach. Rockford Fosgate specifies a 26-250 Hz frequency response and 86 dB sensitivity for the loaded system. This makes it suitable for systems where the main speakers handle midrange and high frequencies while the subwoofer handles bass.\u003c\/p\u003e\u003cp\u003eInside, the enclosure uses a Punch P2D2-12 subwoofer with dual 2-ohm voice coils wired internally to a 1-ohm load. The driver uses a Kevlar-reinforced paper-pulp cone, a tall-profile VAST Santoprene surround, and a high-temperature 2.25-inch four-layer voice coil. Its motor and cooling features are designed to support the rated continuous-power handling.\u003c\/p\u003e\u003cp\u003eThe P2-1X12 can serve as the bass foundation for an aftermarket head unit, factory-radio integration setup, or larger multi-amplifier system. Its high-current binding posts simplify connection from a compatible 1-ohm-stable amplifier. The complete enclosure format also avoids the need to choose a separate box for the included subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Loaded Enclosure:\u003c\/strong\u003e Includes one Punch P2D2-12 subwoofer in a ready-to-connect ported cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Internal wiring presents a 1-ohm nominal load to a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400-Watt RMS Handling:\u003c\/strong\u003e Matches with amplification rated appropriately for 400 watts RMS at 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Port Design:\u003c\/strong\u003e High-flow, low-noise port supports efficient low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Medium-density fiberboard construction provides a rigid enclosure structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Current Binding Posts:\u003c\/strong\u003e Provides clear red-positive and black-negative amplifier connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P2-1X12 uses a 5\/8-inch MDF enclosure covered in high-density carpet. Its ported design incorporates Rockford Fosgate's proprietary high-flow, low-noise port, while high-current binding posts provide the external speaker connection. The included P2D2-12 driver features a Kevlar-reinforced paper-pulp cone, Santoprene surround, dual spider assembly, and protective PVC motor cover.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a suitable vehicle cargo area, leaving the port unobstructed. Connect the amplifier's positive speaker output to the red enclosure terminal and its negative output to the black terminal; use an amplifier that is stable at 1 ohm and set up for the enclosure's 400-watt RMS rating. Disconnect the vehicle battery's negative terminal before installation, and route speaker cable away from high-current vehicle wiring where practical.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634275639366,"sku":"P2-1X12","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/713dKFK6iFL.jpg?v=1784429252"},{"product_id":"rockford-fosgate-p3-1x12-12-loaded-ported-subwoofer","title":"Rockford Fosgate P3-1X12 12\" Loaded Ported Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3-1X12 is a loaded 12-inch subwoofer enclosure designed to add low-frequency impact to a car audio system without requiring a separate box build. It combines one Punch P3D2-12 dual-voice-coil subwoofer with a factory-matched vented enclosure. The enclosure is internally wired for a 1-ohm final load, simplifying amplifier matching for an appropriate 1-ohm-stable mono amplifier.\u003c\/p\u003e\u003cp\u003eThis model suits listeners who want a ready-to-install bass upgrade for a trunk, hatchback, SUV, or other vehicle with adequate cargo space. Its vented enclosure is intended to support strong output and extended low-bass response. With 600 watts RMS power handling, it is designed for systems built around a substantial dedicated subwoofer amplifier.\u003c\/p\u003e\u003cp\u003eThe P3-1X12 uses a Punch P3D2-12 woofer with an anodized aluminum cone and dustcap, Santoprene surround, and dual 2-ohm voice coils. The cone structure and vented motor design are intended to help manage heat during sustained playback. Its published system frequency response is 27-250 Hz, covering the bass range normally assigned to a subwoofer.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a proprietary high-flow, low-noise front port to move air efficiently while helping reduce port noise. A 5\/8-inch MDF cabinet provides a rigid foundation for the driver, while black carpeting gives the enclosure a finished appearance. High-current binding posts provide a direct connection point for the amplifier's speaker output.\u003c\/p\u003e\u003cp\u003eBecause the woofer and enclosure are already matched, the P3-1X12 can be a practical alternative to selecting a raw subwoofer and designing a custom enclosure. Pair it with an amplifier that is stable at 1 ohm and rated within the enclosure's 300-600 watt RMS range. Proper gain setting, a low-pass crossover, secure mounting, and correctly sized wiring are important parts of a reliable installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch P3 System:\u003c\/strong\u003e Includes one factory-installed Punch P3D2-12 subwoofer in a vented enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Dual 2-ohm voice coils are internally wired in parallel for compatible mono amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600-Watt RMS Handling:\u003c\/strong\u003e Supports amplifier power in the published 300-600 watt RMS operating range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Port Design:\u003c\/strong\u003e High-flow, low-noise port supports efficient bass output from the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Cone:\u003c\/strong\u003e Rigid, lightweight cone material helps maintain controlled woofer movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Medium-density fiberboard construction helps resist enclosure flex during playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3-1X12 combines a black-carpeted 5\/8-inch MDF enclosure with a front-firing 12-inch woofer and proprietary port. The loaded P3D2-12 driver includes a StampCast basket with integrated spider venting, a protective PVC magnet cover, a cast-aluminum trim ring, and a Santoprene surround. The enclosure uses high-current spring-loaded binding posts and accepts speaker wire up to 10 AWG.\u003c\/p\u003e\u003cp\u003eAllow space for the enclosure's 15.125-inch height, 19.125-inch width, and 15.75-inch bottom depth before purchase. Connect it only to an amplifier that is rated stable at a 1-ohm speaker load, then set gain conservatively and use a low-pass crossover appropriate for the rest of the system. Secure the enclosure so it cannot shift while driving, and keep the port and woofer area clear of cargo.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634311553094,"sku":"P3-1X12","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71IsmYeyoyL.jpg?v=1784430436"},{"product_id":"rockford-fosgate-p3s-1x10-10-shallow-loaded-subwoofer","title":"Rockford Fosgate P3S-1X10 10\" Shallow Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3S-1X10 is a loaded 10-inch shallow subwoofer enclosure designed for vehicles with limited mounting depth. Its sealed wedge enclosure helps bring bass reinforcement to trucks and other installations where a conventional deep subwoofer box may not fit. The enclosure arrives with a Punch P3 shallow subwoofer already installed and wired.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners who need a compact bass upgrade without building a custom enclosure. Its slim profile is useful behind seats, in space-conscious cargo areas, and in other depth-limited locations. Measure the available space carefully before purchase, including clearance for terminals and wiring.\u003c\/p\u003e\u003cp\u003eThe sealed enclosure design supports controlled, focused low-frequency performance rather than the character of a larger vented enclosure. With 300 watts RMS power handling and a 1-ohm final load, it is suited to a compatible mono amplifier rated for stable 1-ohm operation. The loaded enclosure is specified for a 40-250 Hz frequency response.\u003c\/p\u003e\u003cp\u003eInside is a Rockford Fosgate P3SD2-10 shallow-mount subwoofer with dual 2-ohm voice coils wired internally to a 1-ohm load. The driver uses an anodized aluminum cone, Santoprene surround, dual spider construction, and a shallow motor assembly. These design elements allow the subwoofer to operate in a slim enclosure while maintaining its specified excursion and power capability.\u003c\/p\u003e\u003cp\u003eThe P3S-1X10 provides a straightforward path to adding a dedicated bass channel to an aftermarket audio system. Pair it with an appropriate amplifier, amplifier wiring kit, signal connection method, and installation hardware for the vehicle. Mounting brackets and self-tapping screws are included to help secure the enclosure during installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 10-Inch Design:\u003c\/strong\u003e Includes one factory-installed Punch P3 shallow subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Internally wired for a compatible 1-ohm-stable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Enclosure:\u003c\/strong\u003e Delivers compact placement with controlled bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Construction:\u003c\/strong\u003e Helps fit locations with limited available depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-Release Terminals:\u003c\/strong\u003e Accept speaker wire up to 10 AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is built from 5\/8-inch medium-density fiberboard and covered in carpet, with a stitched Diamond-R logo. Its slim-line wedge shape measures 13.5 inches high by 19.0 inches wide, with a 5.25-inch bottom depth and 3.25-inch top depth. The installed P3SD2-10 uses an anodized aluminum cone, Santoprene surround, cast trim ring, and shallow motor assembly.\u003c\/p\u003e\u003cp\u003eUse the included metal mounting brackets and four self-tapping screws to secure the enclosure to a suitable vehicle structure. Connect amplifier positive output to the red enclosure terminal and negative output to the black terminal, keeping speaker wire away from high-current vehicle wiring where practical. Because the enclosure presents a 1-ohm load, use only an amplifier specified to operate safely at 1 ohm and set gain appropriately for the 300-watt RMS rating.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634369323078,"sku":"P3S-1X10","price":369.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-thRj6GaL.jpg?v=1784431465"},{"product_id":"rockford-fosgate-p3s-1x12-12-shallow-loaded-subwoofer","title":"Rockford Fosgate P3S-1X12 12\" Shallow Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate P3S-1X12 is a loaded 12-inch shallow subwoofer enclosure designed for vehicles with limited mounting depth. Its sealed, slim wedge enclosure is well suited to locations such as behind a truck seat or other space-restricted areas. The enclosure arrives with its subwoofer installed and internally wired, simplifying the bass upgrade process.\u003c\/p\u003e\u003cp\u003eThis system uses one Punch P3 shallow-mount dual voice coil subwoofer and presents a final 1-ohm load. It is rated for 400 watts RMS and 800 watts peak power handling. Pair it with an amplifier that is stable at 1 ohm and appropriately rated for the enclosure's continuous power capability.\u003c\/p\u003e\u003cp\u003eThe sealed enclosure design is intended for controlled, accurate low-frequency reproduction rather than the character of a vented box. A 12-inch driver provides meaningful cone area while the shallow motor design helps keep the enclosure depth low. This makes it a practical choice for drivers who need bass without dedicating a large portion of the cabin or cargo area.\u003c\/p\u003e\u003cp\u003eThe loaded P3SD2-12 subwoofer uses an anodized aluminum cone, Santoprene surround, dual linear spiders, and a shallow motor assembly. Its 2.5-inch high-temperature voice coil and integrated spider venting support sustained operation within its rated power range. The enclosure is internally configured from the driver's dual 2-ohm voice coils to a 1-ohm final impedance.\u003c\/p\u003e\u003cp\u003eThe P3S-1X12 can be used as the dedicated low-frequency section of an aftermarket car-audio system. It requires a compatible external amplifier, speaker wire, and secure vehicle mounting. Its compact wedge profile helps it integrate into trucks and other vehicles where a conventional deep subwoofer enclosure is impractical.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 12-Inch Design:\u003c\/strong\u003e Fits applications with limited enclosure depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded Sealed Enclosure:\u003c\/strong\u003e Provides a pre-installed subwoofer and enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Final Load:\u003c\/strong\u003e Internally wired for compatible 1-ohm-stable amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400-Watt RMS Rating:\u003c\/strong\u003e Supports properly matched continuous amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnodized Aluminum Cone:\u003c\/strong\u003e Combines rigidity with low moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Cabinet:\u003c\/strong\u003e Adds a durable foundation for the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P3S-1X12 uses a sealed slim-line wedge enclosure constructed from 5\/8-inch MDF and finished in black carpet. It includes a stitched Diamond-R logo, a single input terminal connection, and quick-release 10 AWG input terminals. The installed P3SD2-12 driver includes a StampCast basket, integrated spider venting, a cast-aluminum trim ring, and a shallow magnet motor structure.\u003c\/p\u003e\u003cp\u003eMeasure the intended location before purchase, allowing for the enclosure's 13.5-inch height, 27.375-inch width, and wedge depth. Secure the enclosure to the vehicle using appropriate mounting hardware so it cannot shift during driving. Connect it only to an amplifier rated to operate safely at a 1-ohm load, and set gain and crossover controls carefully to avoid exceeding its 400-watt RMS rating.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634370633798,"sku":"P3S-1X12","price":409.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71VnSGP5nbL.jpg?v=1784431540"},{"product_id":"rockford-fosgate-r2s-1x10-10-shallow-loaded-subwoofer","title":"Rockford Fosgate R2S-1X10 10\" Shallow Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate R2S-1X10 is a sealed, shallow 10-inch loaded subwoofer enclosure designed to add low-frequency output where conventional subwoofer boxes take up too much room. Its wedge-shaped cabinet is suited to space-conscious installations, including single-cab trucks and other vehicles with limited depth behind or under seating. The enclosure arrives loaded and internally wired, simplifying the path to a compact bass upgrade.\u003c\/p\u003e\u003cp\u003eThis enclosure presents a 2-ohm nominal load and is rated for 200 watts RMS with 400 watts maximum power handling. It is intended for use with an external amplifier that is stable at a 2-ohm speaker load and appropriately power matched. The sealed design supports controlled, space-efficient bass integration rather than requiring a large ported cabinet.\u003c\/p\u003e\u003cp\u003eA single Rockford Fosgate R2SD4-10 shallow dual-voice-coil subwoofer is installed in the enclosure. The driver uses a polypropylene cone, poly-foam surround, steel basket, and high-temperature voice coil with an aluminum former. Its shallow motor arrangement helps make the low-profile enclosure possible.\u003c\/p\u003e\u003cp\u003eThe R2S-1X10 cabinet measures 13.5 inches high by 19.0 inches wide, with a wedge depth of 5.25 inches at the bottom and 3.25 inches at the top. This profile is useful when seat travel or cargo-room clearance limits the enclosure depth available. Quick-release compression terminals provide a straightforward connection point for speaker wire from the amplifier.\u003c\/p\u003e\u003cp\u003eFor a complete bass system, pair the enclosure with suitable amplification, amplifier power wiring, signal connections, and installation hardware appropriate for the vehicle. The included mounting brackets can help secure the enclosure, but vehicle-specific fitment should be verified by measuring the intended location. Proper amplifier gain and crossover setup are important for matching the enclosure to the rest of the audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 10-Inch Enclosure:\u003c\/strong\u003e Fits installations with limited available depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Load:\u003c\/strong\u003e Internally wired for compatible 2-ohm amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Rating:\u003c\/strong\u003e Supports appropriately matched external amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Cabinet:\u003c\/strong\u003e Uses a compact truck-style enclosure profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Construction:\u003c\/strong\u003e Provides a rigid cabinet foundation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-Release Terminals:\u003c\/strong\u003e Makes speaker-wire connection and removal more convenient.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2S-1X10 uses a 5\/8-inch MDF wedge enclosure covered in high-density carpet. Its loaded R2SD4-10 driver incorporates a steel basket, polypropylene cone, poly-foam surround, integrated PVC trim ring, and compression terminal assembly. The slim enclosure is 5.25 inches deep at its lower section and 3.25 inches deep at its upper section.\u003c\/p\u003e\u003cp\u003eConnect the amplifier's positive speaker output to the enclosure's red terminal and the negative output to the black terminal. Use an amplifier rated to operate with a 2-ohm load and keep its continuous output appropriately matched to the enclosure's 200-watt RMS rating. Measure the intended mounting area before installation, secure the enclosure with the included brackets where appropriate, and route speaker wire away from high-current vehicle wiring.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45642273161286,"sku":"R2S-1X10","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ayc5ur-TL.jpg?v=1784435979"},{"product_id":"rockford-fosgate-r2s-1x12-12-shallow-loaded-subwoofer","title":"Rockford Fosgate R2S-1X12 12\" Shallow Loaded Subwoofer","description":"\u003cp\u003eThe Rockford Fosgate R2S-1X12 is a sealed, single-12-inch shallow loaded subwoofer enclosure designed for vehicles where conventional subwoofer boxes take up too much room. Its low-profile wedge shape is intended for tight locations such as behind the seat in many single-cab trucks. The enclosure arrives with the subwoofer installed and internally wired, simplifying the path to adding bass to a compatible system.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want additional low-frequency output without committing much cabin space to a deeper box. The sealed design is built around a Rockford Fosgate R2SD4-12 shallow dual-voice-coil subwoofer and presents a 2-ohm nominal load. With 250 watts RMS power handling, it is intended to pair with an amplifier rated appropriately for a 2-ohm subwoofer load.\u003c\/p\u003e\u003cp\u003eThe R2S-1X12 emphasizes a compact installation footprint while retaining a full 12-inch woofer. Its wedge enclosure measures just 3.25 inches deep at the top and 5.25 inches deep at the bottom, helping it fit where seat travel and rear-cab clearance are limited. This makes it a practical option when a traditional full-depth enclosure will not fit.\u003c\/p\u003e\u003cp\u003eThe installed R2SD4-12 uses a shallow-profile motor and frame design, a polypropylene cone, foam surround, and dual 4-ohm voice coils. Inside this loaded enclosure, the voice coils are wired to a 2-ohm nominal impedance. The result is a ready-to-connect passive bass enclosure that can be integrated with an aftermarket amplifier and source unit.\u003c\/p\u003e\u003cp\u003eConstruction includes 5\/8-inch MDF, high-density carpet covering, and quick-release compression terminals. Mounting brackets and self-tapping screws are included to help secure the enclosure in an appropriate vehicle location. It is a focused upgrade for space-constrained installations that need a compact, enclosed subwoofer solution.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Shallow Subwoofer:\u003c\/strong\u003e Provides bass reinforcement in a space-conscious enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Wedge Enclosure:\u003c\/strong\u003e Fits low-clearance locations with limited available depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Load:\u003c\/strong\u003e Internally wired for a compatible 2-ohm amplifier connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250-Watt RMS Handling:\u003c\/strong\u003e Matches amplifiers delivering appropriately rated continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8-Inch MDF Construction:\u003c\/strong\u003e Provides a solid enclosure foundation for the installed woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-Release Terminals:\u003c\/strong\u003e Makes connecting speaker wire more straightforward during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe R2S-1X12 uses a sealed wedge enclosure constructed from 5\/8-inch MDF and finished in high-density carpet. Its angled profile measures 13.5 inches high and 27.375 inches wide, with a 5.25-inch bottom depth and a 3.25-inch top depth. The enclosure uses quick-release compression terminals for its speaker-wire connection.\u003c\/p\u003e\u003cp\u003eInstall the enclosure only after measuring the intended location and allowing room for seat movement, wiring, and secure mounting. Connect it to an external amplifier that is stable at a 2-ohm load and whose RMS output is matched appropriately to the enclosure's 250-watt RMS rating. Two mounting brackets and four 3\/4-inch self-tapping screws are included to assist with securing the enclosure.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45642388439110,"sku":"R2S-1X12","price":259.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Y2g5mcZwL.jpg?v=1784436041"}],"url":"https:\/\/audiowatt.store\/collections\/loaded-subwoofer-enclosures.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}