{"title":"KRK","description":null,"products":[{"product_id":"krk-cl5g3-na-classic-5-5-powered-studio-monitor","title":"KRK CL5G3-NA Classic 5 5\" Powered Studio Monitor","description":"\u003cp\u003eThe KRK CL5G3-NA Classic 5 is a self-powered 5-inch nearfield studio monitor designed for close-range music production, editing, and critical listening. Its active two-way design eliminates the need for a separate power amplifier, helping keep desktop and compact-studio systems straightforward. This listing is for one monitor, making it suitable for adding to an existing setup or building a stereo pair.\u003c\/p\u003e\u003cp\u003eFor creators who need a more neutral starting point than a typical consumer speaker, the Classic 5 provides a flat low-frequency setting intended for practical mix decisions. The rear-panel LF and HF adjustments let users compensate for room placement and personal listening preference. An optional +2 dB low-frequency setting adds extra bass presence when desired.\u003c\/p\u003e\u003cp\u003eA 5-inch glass-aramid composite woofer handles midrange and low frequencies, while a 1-inch textile soft-dome tweeter covers the high end. The monitor's specified frequency response is 56 Hz to 30 kHz within ±3 dB, with a stated -10 dB range of 46 Hz to 34.5 kHz. Its bi-amplified Class A\/B design assigns dedicated power to the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThe front-slotted bass port supports flexible placement on a workstation or monitor stand, including setups closer to a wall than many rear-ported designs allow. A system-optimized auto-limiter helps manage unexpected peaks. The cabinet also includes a foam isolation pad to help reduce vibration transfer to the supporting surface.\u003c\/p\u003e\u003cp\u003eBalanced XLR and 1\/4-inch TRS inputs support connection to audio interfaces, mixers, and other professional line-level gear, while the RCA input accommodates unbalanced sources. Use one input source at a time per monitor. Pair two Classic 5 monitors with a stereo audio interface or mixer for left\/right monitoring, and set both rear-panel volume controls to matching positions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Two-Way Design:\u003c\/strong\u003e Built-in amplification powers each driver without an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch Glass-Aramid Woofer:\u003c\/strong\u003e Delivers defined midrange and compact-monitor bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Soft-Dome Tweeter:\u003c\/strong\u003e Extends high-frequency reproduction to 34.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Amplified Class A\/B Power:\u003c\/strong\u003e Uses dedicated 30W LF and 20W HF amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLF And HF Adjustments:\u003c\/strong\u003e Tailor tonal balance for placement and room conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Analog Inputs:\u003c\/strong\u003e Connect with balanced XLR, balanced TRS, or unbalanced RCA.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Classic 5 uses a low-resonance cabinet made from 15 mm MDF and high-impact polystyrene, finished in black vinyl wrap. Its front-facing bass port, 5-inch yellow glass-aramid woofer, and 1-inch textile soft-dome tweeter form a compact vertical monitor layout. A factory-installed foam isolation pad is fitted underneath the enclosure.\u003c\/p\u003e\u003cp\u003ePlace a stereo pair approximately 3 to 5 feet apart, aimed toward the listening position to form an equilateral triangle, with the acoustic axis near ear level. Connect an audio interface or mixer with balanced XLR or 1\/4-inch TRS cables when available; RCA can be used for unbalanced gear. Audio cables are not included, and only one input source should be connected to each monitor at a time.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669422760006,"sku":"CL5G3-NA","price":222.76,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/612_JUeg8wL.jpg?v=1784500930"},{"product_id":"krk-cl5g3pk1-5-powered-studio-monitor-pair-pack","title":"KRK CL5G3PK1 5\" Powered Studio Monitor Pair Pack","description":"\u003cp\u003eThe KRK CL5G3PK1 package combines two CLASSIC 5 powered studio monitors with essential setup accessories for a compact stereo monitoring system. Each monitor is self-powered, so a separate speaker amplifier is not required. This package is intended for music production, recording, editing, content creation, and critical listening at a desk or in a small studio.\u003c\/p\u003e\u003cp\u003eEach CLASSIC 5 is a two-way monitor with a 5-inch glass aramid woofer and a 1-inch textile soft-dome tweeter. Its built-in bi-amplified Class A\/B power section supplies 30 watts to the low-frequency driver and 20 watts to the high-frequency driver. The monitor is designed around a flat response setting for evaluating mixes, with user-adjustable low- and high-frequency controls for adapting to a room.\u003c\/p\u003e\u003cp\u003eThe front-firing port supports practical placement on a desktop, monitor stand, or shelf, including positions that may be closer to a wall than a rear-ported design. Frequency response is rated from 56 Hz to 30 kHz within +\/-3 dB, with a -10 dB frequency range extending from 46 Hz to 34.5 kHz. A system-optimized limiter helps manage unexpected peaks during use.\u003c\/p\u003e\u003cp\u003eConnection options include balanced XLR, balanced 1\/4-inch TRS, and unbalanced RCA inputs. This lets the monitors work with many audio interfaces, mixers, controllers, and other line-level playback equipment. Each speaker has its own volume control, so the pair should be set up and level-matched as a stereo system.\u003c\/p\u003e\u003cp\u003eThe CL5G3PK1 pack includes two monitors, two 10-foot XLR-M to XLR-F cables, and two split foam monitor wedge isolation pads. The included cables can simplify connection from balanced equipment with XLR outputs, while the wedge pads help isolate the monitors from their supporting surface. It is a complete starting package for users who need a pair of nearfield powered monitors and basic placement accessories.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered Two-Way Design:\u003c\/strong\u003e Each monitor has matched internal amplification for its woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch Glass Aramid Woofer:\u003c\/strong\u003e The rigid, lightweight composite woofer handles low and mid frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Textile Dome Tweeter:\u003c\/strong\u003e The soft-dome tweeter provides high-frequency extension to 34.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Watt Bi-Amplification:\u003c\/strong\u003e Each monitor uses 30 watts for LF and 20 watts for HF.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Analog Inputs:\u003c\/strong\u003e XLR, 1\/4-inch TRS, and RCA inputs support common source equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessory Pack Included:\u003c\/strong\u003e Includes two XLR cables and two split foam isolation wedges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eEach CLASSIC 5 uses a 15 mm MDF enclosure with high-impact polystyrene construction elements and a black vinyl-wrap finish. The cabinet uses a front-firing port, and the monitor has no grille. Foam isolation pads are fitted to the bottom of each monitor.\u003c\/p\u003e\u003cp\u003ePlace the two monitors as a left\/right pair at ear height when possible, with the tweeters aimed toward the listening position. Connect each monitor to a line-level source using XLR, 1\/4-inch TRS, or RCA as appropriate, then set both volume controls to matching levels. Use the included split foam wedges beneath the monitors for desktop or stand placement, and adjust the LF and HF controls only as needed for the room and listening position.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669422825542,"sku":"CL5G3PK1 (SINGLE)","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61kqWzJv8KL.jpg?v=1784500962"},{"product_id":"krk-cl7g3-na-classic-7-7-powered-studio-monitor","title":"KRK CL7G3-NA Classic 7 7\" Powered Studio Monitor","description":"\u003cp\u003eThe KRK CL7G3-NA Classic 7 is a self-powered two-way professional studio monitor built for nearfield listening, music production, mixing, editing, and content creation. Its integrated amplification eliminates the need to match the speaker with a separate external power amp. This makes it a practical choice for desktop studios, production rooms, DJ setups, and audio workstations that need a dedicated reference monitor.\u003c\/p\u003e\u003cp\u003eA 7-inch glass aramid woofer and 1-inch textile soft-dome tweeter deliver the Classic 7's two-way design. The monitor is tuned for a flat listening mode intended to support critical decisions while mixing and balancing recordings. Its frequency response extends from 47.5 Hz to 34.5 kHz within the stated ±3 dB range, with deeper low-frequency extension available within its -10 dB range.\u003c\/p\u003e\u003cp\u003eCustom bi-amplified Class A\/B power supplies 48 watts to the low-frequency driver and 25 watts to the high-frequency driver, for 73 watts total. This dedicated amplification approach pairs each driver with its own amplifier channel. The monitor is specified for a maximum peak level of 106 dB SPL.\u003c\/p\u003e\u003cp\u003eRoom placement can substantially affect a monitor's tonal balance, especially in the bass range. The Classic 7 includes separate low- and high-frequency adjustment controls so users can tailor its output for room acoustics and listening preference. A selectable +2 dB low-frequency setting supports the KRK Bass Boost option, while the front-firing port helps accommodate placement nearer to a wall.\u003c\/p\u003e\u003cp\u003eFor connection flexibility, the Classic 7 accepts balanced XLR and 1\/4-inch TRS sources as well as unbalanced RCA sources. It can connect directly to an audio interface, mixer, computer output, or compatible DJ equipment, using one source connection at a time. Add a second Classic 7 for a conventional left\/right monitoring setup, then level-match the two monitors for consistent stereo listening.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e73-Watt Bi-Amplification:\u003c\/strong\u003e Separate 48W and 25W amplifiers power the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Glass Aramid Woofer:\u003c\/strong\u003e Handles midrange and low-frequency reproduction in the two-way system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Textile Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction up to the stated response range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Bass Port:\u003c\/strong\u003e Supports flexible placement when working near a wall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLF And HF Adjustments:\u003c\/strong\u003e Helps tailor tonal balance for room placement and preference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Analog Input Types:\u003c\/strong\u003e RCA, balanced TRS, and balanced XLR support common studio gear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Classic 7 uses a 15 mm MDF enclosure with high-impact polystyrene components and a black vinyl-wrap finish. Its cabinet incorporates a front bass port, rear-panel controls, an IEC AC inlet, and a foam isolation pad. The monitor measures 11.40 inches high by 8.90 inches wide by 13.07 inches deep and weighs 18.5 pounds.\u003c\/p\u003e\u003cp\u003eConnect one audio source at a time: use balanced XLR or 1\/4-inch TRS from an audio interface or mixer, or RCA for an unbalanced source. The supplied AC power cord connects to the IEC power inlet; audio cables are not included. For stereo monitoring, position a matched pair about 3 to 5 feet apart, angle them about 60 degrees toward the listening position, and aim the acoustic axis toward ear level.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669424562246,"sku":"CL7G3-NA","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61_jvkk1RPL.jpg?v=1784501008"},{"product_id":"krk-cl8g3ss-na-classic-8ss-8-studio-monitor","title":"KRK CL8G3SS-NA Classic 8ss 8\" Studio Monitor","description":"\u003cp\u003eThe KRK CL8G3SS-NA Classic 8ss is a limited-edition, self-powered 8-inch two-way studio monitor designed for near-field listening, music production, and critical playback. Its built-in amplification eliminates the need for a separate power amplifier, helping keep a desktop or studio monitoring setup straightforward. This listing is for one individual monitor.\u003c\/p\u003e\u003cp\u003eBuilt around the Classic 8 platform, the Classic 8ss is intended for creators who need a balanced reference when tracking, editing, mixing, or producing. The monitor uses a flat-response listening mode for critical work, while onboard level adjustments help tailor its output to room placement and listening preferences. A selectable low-frequency adjustment can also add bass energy when desired.\u003c\/p\u003e\u003cp\u003eA 1-inch textile soft-dome tweeter handles high frequencies, while an 8-inch glass aramid woofer covers the midrange and bass region. The bi-amplified Class A\/B design assigns 25 watts to the tweeter and 75 watts to the woofer for 100 watts of total amplifier power. Its specified frequency response is 42.5 Hz to 28 kHz within ±3 dB.\u003c\/p\u003e\u003cp\u003eThe front-slotted bass port supports low-frequency extension while avoiding the clearance concerns of a rear-ported cabinet. With balanced XLR and 1\/4-inch TRS inputs plus an unbalanced RCA input, the monitor can connect to common audio interfaces, mixers, computers, and DJ equipment. Only one input source should be connected to a monitor at a time.\u003c\/p\u003e\u003cp\u003eThis Scott Storch edition retains the Classic 8 monitoring configuration in a black vinyl-wrapped enclosure with a gold chrome electroplated front baffle and signature detailing. It works well as part of a matched stereo pair, with each monitor positioned vertically and aimed toward the listening position. Bottom-mounted foam isolation pads help protect the supporting surface and provide isolation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Two-Way Design:\u003c\/strong\u003e Built-in bi-amplification removes the need for an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Class A\/B Amplification:\u003c\/strong\u003e Separate 75W LF and 25W HF amplifiers power each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Glass Aramid Woofer:\u003c\/strong\u003e Covers midrange and low-frequency monitoring duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Textile Dome Tweeter:\u003c\/strong\u003e Delivers extended high-frequency reproduction through 28 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Slotted Bass Port:\u003c\/strong\u003e Supports bass extension with flexible placement options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Analog Inputs:\u003c\/strong\u003e XLR, 1\/4-inch TRS, and RCA support common source equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Classic 8ss uses a 15 mm MDF cabinet with high-impact polystyrene construction, a black vinyl wrap, and a gold chrome electroplated front baffle. Its vertical enclosure houses the tweeter, woofer, front port, rear-panel controls, power indicator, and IEC AC inlet. The cabinet has no grille and no mounting points.\u003c\/p\u003e\u003cp\u003eFor stereo monitoring, use two matched units placed about 3 to 5 feet apart and aimed inward at roughly 60 degrees to form an equilateral triangle with the listening position. Position the acoustic axis near ear level, connect one source per monitor, and use balanced XLR or TRS connections with an audio interface or mixer when available. Set the HF and LF controls flat initially, then make small adjustments for room placement; an AC power cord is provided, but audio cables are not included.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669425020998,"sku":"CL8G3SS-NA","price":484.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71rVaFkFyCL.jpg?v=1784501050"},{"product_id":"krk-rp5g4-na-rokit-5-g4-5-powered-studio-monitor","title":"KRK RP5G4-NA ROKIT 5 G4 5\" Powered Studio Monitor","description":"\u003cp\u003eThe KRK RP5G4-NA ROKIT 5 G4 is a self-powered 5-inch near-field studio monitor built for accurate playback in compact production, editing, and listening spaces. Its active bi-amplified design eliminates the need for an external speaker amplifier. Use a matched pair for stereo monitoring from an audio interface, monitor controller, mixer, computer, or compatible music source.\u003c\/p\u003e\u003cp\u003eThis monitor is intended for producers, musicians, podcasters, video editors, and home-studio users who need a focused reference speaker at close listening distances. The 5-inch format suits desk-based and small-room setups where larger monitors may be impractical. A front-firing port helps make placement more flexible than a rear-ported design.\u003c\/p\u003e\u003cp\u003eThe RP5G4 combines a 5.25-inch Kevlar woofer with a 1-inch Kevlar tweeter in a two-way cabinet. Its specified frequency response extends from 43 Hz to 40 kHz, while the built-in 55-watt Class D amplification is divided between the low- and high-frequency drivers. A brickwall limiter is included to help protect the system at high levels.\u003c\/p\u003e\u003cp\u003eDSP-driven room tuning is a central part of the ROKIT G4 design. The rear LCD provides visual feedback for volume and EQ settings, with 25 available EQ voicings for adapting the monitor to room placement and acoustics. The monitor also works with the KRK Audio Tools app for setup assistance.\u003c\/p\u003e\u003cp\u003eEach RP5G4-NA is sold as one powered monitor, so a conventional stereo setup requires two units. Its balanced XLR\/1\/4-inch combo input connects directly to an interface, mixing board, or monitor controller. For systems needing deeper bass extension, it can be paired with an appropriately integrated powered subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Bi-Amplification:\u003c\/strong\u003e Built-in Class D amplification powers each driver without an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar Driver System:\u003c\/strong\u003e Matching Kevlar woofer and tweeter support consistent two-way monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55-Watt RMS Output:\u003c\/strong\u003e Delivers 35 watts to the woofer and 20 watts to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP Room Tuning:\u003c\/strong\u003e Provides 25 EQ voicings to help address room-related tonal issues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear LCD Display:\u003c\/strong\u003e Shows volume and EQ settings for direct monitor adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Supports low-frequency extension with flexible placement options.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RP5G4-NA uses a low-resonance enclosure with a front-firing port, optimized high-frequency waveguide, and integrated EVA foam cushion on its base. Its 5.25-inch Kevlar woofer uses a rubber surround, while the 1-inch tweeter also uses Kevlar. The black cabinet measures 11.22 inches high, 7.48 inches wide, and 9.49 inches deep.\u003c\/p\u003e\u003cp\u003eFor stereo use, install one monitor for each channel and connect each unit to a line-level output using balanced XLR or 1\/4-inch TRS cables when available. Position the monitors roughly 3 to 5 feet apart, aimed toward the listening position, with the acoustic axis at ear level. Begin with both EQ sections set to Flat and make room-tuning adjustments only after placement is established.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669425283142,"sku":"RP5G4-NA","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ZaZ0nW2cL.jpg?v=1784501094"},{"product_id":"krk-rp5g5-na-5-powered-studio-monitor","title":"KRK RP5G5-NA 5\" Powered Studio Monitor","description":"\u003cp\u003eThe KRK RP5G5-NA ROKIT 5 Generation Five is a self-powered 5-inch, two-way studio reference monitor designed for nearfield listening, production, editing, and critical playback. Its built-in amplification eliminates the need for an external speaker amplifier, helping create a compact monitoring setup from an audio interface, mixer, controller, or other line-level source. Each RP5G5-NA is sold as one powered monitor, so a stereo system uses two units.\u003c\/p\u003e\u003cp\u003eThis monitor is suited to musicians, producers, DJs, content creators, and listeners who need a compact speaker with dedicated low- and high-frequency drivers. The 5-inch woven Kevlar aramid-fiber woofer handles low and low-mid frequencies, while the 1-inch silk-dome tweeter covers the upper range. Its stated frequency response is 54 Hz to 30 kHz within ±3 dB.\u003c\/p\u003e\u003cp\u003eROKIT Generation Five adds three selectable voicing modes for different listening tasks. Mix Mode is intended for flat frequency and phase response, Focus Mode emphasizes midrange evaluation, and Create Mode provides an alternate voicing for writing, producing, and casual listening. Twenty-five boundary and tuning EQ combinations help adapt the monitor to placement and room conditions.\u003c\/p\u003e\u003cp\u003eA bi-amplified Class D amplifier section supplies separate power to the woofer and tweeter. The LF amplifier is rated at 35 watts and the HF amplifier at 20 watts, for 55 watts of total rated power. The bass-reflex enclosure, low-diffraction baffle, and 155-degree horizontal by 126-degree vertical coverage support controlled nearfield monitoring.\u003c\/p\u003e\u003cp\u003eThe RP5G5-NA connects through its balanced XLR\/1\/4-inch TRS combo analog input, making it appropriate for common studio line-level outputs. Acoustic foam wedge isolation pads are included to help reduce surface resonance and support positioning. For a larger or more permanent setup, the cabinet includes four M6 mounting points compatible with specified optional KRK mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Inch Kevlar Woofer:\u003c\/strong\u003e Woven aramid-fiber cone supports controlled low and low-mid reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk-Dome Tweeter:\u003c\/strong\u003e Copper-cap tweeter extends high-frequency performance to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Voicing Modes:\u003c\/strong\u003e Mix, Focus, and Create modes suit different listening tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 EQ Combinations:\u003c\/strong\u003e Boundary and tuning settings help address room-placement effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBi-Amplified Class D Power:\u003c\/strong\u003e Separate 35W LF and 20W HF amplifier sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCombo Analog Input:\u003c\/strong\u003e Balanced XLR and 1\/4-inch TRS connection flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe cabinet uses PVC vinyl-wrapped MDF, while the baffle is made from structurally reinforced high-impact polystyrene. Its 2-way bass-reflex configuration uses a front port and a low-diffraction baffle design. Two magnetic faceplates allow grille or no-grille presentation flexibility.\u003c\/p\u003e\u003cp\u003ePlace the monitor vertically on a stable surface and use the included foam isolation pad to help limit transferred vibration. Connect a line-level source using an appropriate XLR or 1\/4-inch TRS cable, then select the voicing and EQ settings that suit the room and intended use. The four bottom M6 mounting points can be used with the optional KRKSTDX68W1 mounting bracket or KRKSTDX4A1 35 mm mounting adapter.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669425348678,"sku":"RP5G5-NA","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/717Id_g7qkL.jpg?v=1784501140"},{"product_id":"krk-rp7g4-rokit-7-7-powered-studio-monitor","title":"KRK RP7G4 ROKIT 7 7\" Powered Studio Monitor","description":"\u003cp\u003eThe KRK RP7G4 ROKIT 7 is a powered near-field studio monitor designed for music production, editing, content creation, and detailed listening. Its self-powered design combines the speaker drivers, amplification, DSP controls, and input connection in one cabinet. This makes it a practical choice for desktop studios, production rooms, and other listening spaces where accurate monitoring is important.\u003c\/p\u003e\u003cp\u003eA 7-inch Kevlar woofer handles the midrange and low-frequency range, while a matching 1-inch Kevlar tweeter reproduces high frequencies. The two-way, bi-amplified design uses a custom Class D power amplifier with 145 watts of total output. KRK specifies a 42 Hz to 40 kHz frequency response and a maximum SPL of 110 dB.\u003c\/p\u003e\u003cp\u003eThe ROKIT 7 G4 is built to help users account for the effects of room placement and room acoustics. Its onboard DSP-driven room tuning provides 25 visual EQ combinations, accessed through an LCD interface. Low and high EQ controls let users begin with a flat setting, then make measured adjustments for their listening environment.\u003c\/p\u003e\u003cp\u003eA front-firing port supports low-frequency extension while allowing more flexibility when positioning the monitor near a wall than a rear-ported design. The cabinet uses a low-resonance enclosure design, and its integrated high-density foam base helps reduce vibration transfer to a desk or stand. A built-in limiter helps protect the system at high amplifier levels.\u003c\/p\u003e\u003cp\u003eEach RP7G4 is sold as a single powered monitor, so a stereo setup normally uses two units. Connect each monitor to a separate output from an audio interface, mixer, monitor controller, or other line-level source using its balanced XLR\/1\/4-inch TRS combo input. It can also serve as part of a larger monitoring setup when paired with compatible studio equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Inch Kevlar Woofer:\u003c\/strong\u003e Handles midrange and low-frequency reproduction in a compact near-field monitor format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Kevlar Tweeter:\u003c\/strong\u003e Provides high-frequency detail with a driver material matched to the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e145-Watt Bi-Amplified System:\u003c\/strong\u003e Uses dedicated Class D amplification within the monitor cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP Room Tuning:\u003c\/strong\u003e Offers 25 visual EQ combinations for adapting the monitor to room conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Supports bass extension and provides added placement flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrickwall Limiter:\u003c\/strong\u003e Engages at maximum amplifier levels to help protect the monitor system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RP7G4 uses a black, low-resonance cabinet with a front-firing port, Kevlar woofer, Kevlar tweeter, and an LCD-equipped rear control section. Its integrated high-density foam pad helps decouple the cabinet from the surface beneath it. Optional protective grilles are available separately for the ROKIT 7 G4.\u003c\/p\u003e\u003cp\u003eFor stereo monitoring, use two RP7G4 units and connect each one to its own line-level output with balanced XLR or 1\/4-inch TRS cabling. KRK recommends near-field placement approximately 3 to 5 feet apart, aimed toward the listener at about 60 degrees, with the acoustic axis directed toward ear level. Start with the EQ set flat and adjust room-tuning settings only after evaluating placement and listening position.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669425414214,"sku":"RP7G4-NA","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71GXVFbDJoL.jpg?v=1784501192"},{"product_id":"krk-rp7g4wn-na-rokit-7-7-powered-studio-monitor","title":"KRK RP7G4WN-NA ROKIT 7 7\" Powered Studio Monitor","description":"\u003cp\u003eThe KRK RP7G4WN-NA ROKIT 7 G4 is a single powered near-field studio monitor finished in White Noise. It is designed for music production, mixing, editing, and critical listening where a dedicated monitor can provide a more controlled reference than typical consumer speakers. Its built-in amplification lets it connect directly to an audio interface, mixer, monitor controller, or other line-level source.\u003c\/p\u003e\u003cp\u003eThis two-way monitor combines a low-frequency driver and a 1-inch high-frequency driver in a bi-amplified system. The stated 42 Hz to 40 kHz frequency response and 110 dB maximum SPL support detailed near-field monitoring across a broad working range. A front-firing port helps make placement more practical on desks and in rooms where rear-wall clearance is limited.\u003c\/p\u003e\u003cp\u003eDSP-driven room tuning gives the RP7G4WN-NA 25 EQ voicing combinations for adapting its response to common room and placement effects. Low-frequency shelf and parametric options address wall proximity and desk-related buildup, while high-frequency shelf and parametric options provide additional tonal adjustment. An onboard LCD and rear-panel encoder provide direct access to volume, EQ, and monitor setup settings.\u003c\/p\u003e\u003cp\u003eKRK uses matching Kevlar driver materials in the ROKIT G4 design, paired with a custom Class D power amplifier rated at 145 watts total. The monitor also includes a brickwall limiter and protection circuitry for amplifier overdrive, overheating, and AC power surges. An optimized high-frequency waveguide and low-resonance enclosure are intended to support focused near-field listening.\u003c\/p\u003e\u003cp\u003eThe RP7G4WN-NA is sold as one powered monitor, so a stereo setup requires two units and separate signal feeds for left and right channels. It is a practical fit for a desktop production setup, a small control room, or an upgrade from compact multimedia speakers. Optional KRK grilles are available separately for the ROKIT 7 G4 if driver protection is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e145-Watt Bi-Amplified System:\u003c\/strong\u003e Built-in Class D amplification powers the monitor without an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP Room Tuning:\u003c\/strong\u003e Twenty-five EQ combinations help address common room and placement effects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard LCD Controls:\u003c\/strong\u003e View and adjust EQ, input level, standby, and display settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Supports flexible placement while extending low-frequency performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar Driver Design:\u003c\/strong\u003e Matching driver materials support a consistent voicing across the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Combo Input:\u003c\/strong\u003e Accepts balanced XLR or 1\/4-inch TRS connections from studio equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe White Noise cabinet uses a front-ported, low-resonance design with a magnetically attached front baffle and an EVA foam cushion on the bottom. The foam helps decouple the monitor from a desk or stand surface. The front KRK logo illumination can be set to on, dim, or off from the setup menu.\u003c\/p\u003e\u003cp\u003eFor stereo monitoring, use two monitors, place them roughly 3 to 5 feet apart, and aim them toward the listening position to form an equilateral triangle. Position the acoustic axis near ear height, use balanced XLR or 1\/4-inch TRS cabling when possible, and match the input level on both monitors. Connect all audio equipment before powering the monitor, then use the onboard EQ after evaluating placement in the room.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669427445830,"sku":"RP7G4WN-NA","price":312.03,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51gDbCWFf3L.jpg?v=1784501245"},{"product_id":"krk-rp8g4wn-na-rokit-8-g4-white-8-studio-monitor","title":"KRK RP8G4WN-NA ROKIT 8 G4 White 8\" Studio Monitor","description":"\u003cp\u003eThe KRK RP8G4WN-NA ROKIT 8 G4 is a single powered 8-inch studio monitor designed for nearfield music production, mixing, editing, and critical playback. Its built-in amplification removes the need to match an external power amp to the speaker. The White Noise finish offers a clean alternative to the standard black model while retaining the same monitor platform.\u003c\/p\u003e\u003cp\u003eThis active two-way monitor uses an 8-inch Kevlar woofer and a 1-inch Kevlar dome tweeter to cover low, mid, and high frequencies from one cabinet. Its 36 Hz to 40 kHz frequency response and 111 dB maximum SPL support detailed monitoring with substantial low-frequency extension. The front-firing bass port also makes placement more flexible than a rear-ported design when working near a wall.\u003c\/p\u003e\u003cp\u003eKRK equips the ROKIT 8 G4 with separate Class-D amplifiers for its low- and high-frequency drivers. The bi-amped design provides 135 watts RMS to the woofer and 68 watts RMS to the tweeter, for 203 watts RMS total output. A built-in brickwall limiter helps protect the monitor against excessive amplifier drive.\u003c\/p\u003e\u003cp\u003eRoom acoustics can strongly affect what you hear at the listening position, especially in home and project studios. The ROKIT 8 G4 includes DSP-driven EQ with 25 selectable voicings, adjusted from the rear-panel LCD and encoder. This lets users make practical low- and high-frequency corrections after setting up the monitors in their room.\u003c\/p\u003e\u003cp\u003eUse one monitor for mono reference playback, or purchase two matching units for a conventional left\/right stereo monitoring system. The balanced\/unbalanced XLR and 1\/4-inch TRS combo input connects directly to an audio interface, monitor controller, mixer, or other line-level source. EVA isolation foam on the base helps reduce mechanical coupling to a desk or speaker stand.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Kevlar Woofer:\u003c\/strong\u003e Handles low and mid frequencies with extended bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Kevlar Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies in a matched driver system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e203W Bi-Amplified Power:\u003c\/strong\u003e Built-in Class-D amplification eliminates the need for an external amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP Graphic EQ:\u003c\/strong\u003e Offers 25 room-tuning voicings through the rear LCD.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Port:\u003c\/strong\u003e Supports flexible placement near walls or work surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrickwall Limiter:\u003c\/strong\u003e Helps protect the monitor at high amplifier levels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ROKIT 8 G4 uses a low-resonance, front-ported enclosure with a vertical monitor orientation. Its magnetic front baffle can accept an optional protective grille faceplate, while the integrated EVA foam base helps keep the cabinet stable and isolated from the supporting surface. The rear panel combines the power connection, power switch, analog input, LCD, and control encoder in one accessible location.\u003c\/p\u003e\u003cp\u003eFor stereo monitoring, use two identical units and connect each monitor to its own left or right line-level output. Position the monitors approximately 3 to 5 feet apart, angle them toward the listening position, and keep the acoustic axis near ear height. Connect balanced XLR or 1\/4-inch TRS cables when available, begin with the EQ set flat, and then make room-tuning adjustments only after evaluating placement.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669427478598,"sku":"RP8G4WN-NA","price":442.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/513iOcysiSL.jpg?v=1784501297"},{"product_id":"krk-s10-4-10-powered-studio-subwoofer","title":"KRK S10.4 10\" Powered Studio Subwoofer","description":"\u003cp\u003eThe KRK S10.4 is a powered 10-inch studio subwoofer designed to extend the low-frequency range of compatible studio monitor systems. It helps producers, engineers, DJs, and content creators hear bass information that smaller nearfield monitors may not reproduce fully. Its active design includes built-in amplification, so no separate subwoofer amplifier is required.\u003c\/p\u003e\u003cp\u003eA 10-inch glass aramid composite woofer handles the low end, supported by a front-loaded, vented cabinet design. The system is specified for a 30 Hz to 110 Hz frequency response and up to 117.2 dB maximum peak SPL. This makes it suitable for checking kick drums, bass instruments, low-frequency effects, and overall mix balance in a studio environment.\u003c\/p\u003e\u003cp\u003eThe S10.4 uses a 160-watt Class D amplifier rated at 1% THD+N at 44 Hz. Class D amplification keeps the powered section efficient while supplying controlled low-frequency output. The subwoofer includes a level control, selectable polarity, input-sensitivity settings, and a four-position crossover control for integration with different monitor sizes.\u003c\/p\u003e\u003cp\u003eConnection flexibility is a central part of the design. Balanced XLR and 1\/4-inch TRS inputs and outputs support professional audio interfaces, mixers, and monitor controllers, while RCA connections accommodate unbalanced consumer-audio sources. Outputs are high-passed above the selected crossover point when the subwoofer is active, helping divide bass duties between the subwoofer and connected monitors.\u003c\/p\u003e\u003cp\u003eAn optional momentary footswitch can bypass the subwoofer and high-pass filter for fast full-range monitor comparisons. This is useful when checking how a mix translates with and without added low-frequency extension. The S10.4 can serve as the low-frequency foundation of a 2.1 monitoring setup or as part of a larger studio monitoring system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Glass Aramid Woofer:\u003c\/strong\u003e Provides dedicated low-frequency reproduction for compatible monitor systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160-Watt Class D Amplifier:\u003c\/strong\u003e Powers the subwoofer internally without an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Position Crossover:\u003c\/strong\u003e Helps match bass handoff to connected studio monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Audio Connections:\u003c\/strong\u003e Includes XLR, 1\/4-inch TRS, and RCA inputs and outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitch Bypass Input:\u003c\/strong\u003e Lets an optional footswitch mute the sub and bypass filtering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Lift Switch:\u003c\/strong\u003e Helps reduce noise caused by ground-loop issues.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe S10.4 uses a front-loaded, vented enclosure constructed from 15 mm and 18 mm reinforced MDF. Its cabinet has a black vinyl wrap with a black-painted baffle, while the front bass port supports flexible placement in studio rooms. An EVA isolation pad is included as part of the hardware specification, and an optional perforated-steel grille is available.\u003c\/p\u003e\u003cp\u003eConnect the output of an audio interface, mixer, or monitor controller to the subwoofer using XLR, 1\/4-inch TRS, or RCA connections, then route the corresponding outputs to a pair of powered monitors. Start with the subwoofer volume at minimum, choose a crossover point appropriate for the monitor size and room, and adjust level and polarity for a balanced response at the listening position. Keep ventilation openings clear and use the supplied IEC power cord with a grounded AC outlet.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669428920390,"sku":"S10-4-NA","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61o9rDC9ozL.jpg?v=1784501335"},{"product_id":"krk-s8-4-8-powered-studio-subwoofer","title":"KRK S8.4 8\" Powered Studio Subwoofer","description":"\u003cp\u003eThe KRK S8.4 is an 8-inch powered studio subwoofer designed to extend the low-frequency range of a nearfield monitoring system. It gives producers, engineers, DJs, and content creators a dedicated way to hear bass information that smaller studio monitors may not fully reproduce. Its active design includes onboard amplification, so no separate subwoofer amplifier is required.\u003c\/p\u003e\u003cp\u003eA glass aramid composite woofer and Class D amplifier combine for controlled low-frequency monitoring in compact studio spaces. The S8.4 is specified for a 34.5 Hz to 133 Hz frequency response and a 29 Hz to 205 Hz frequency range at -10 dB. This makes it suited to checking kick drums, bass instruments, low-frequency effects, and overall mix balance.\u003c\/p\u003e\u003cp\u003eThe rear-panel four-position crossover helps integrate the subwoofer with different monitor sizes and listening setups. Its line-level outputs automatically high-pass the signal sent to connected studio monitors above the selected crossover point. This can help divide bass duties between the subwoofer and main monitors in a straightforward 2.1 monitoring system.\u003c\/p\u003e\u003cp\u003eConnection flexibility includes balanced XLR and 1\/4-inch TRS inputs and outputs, along with unbalanced RCA inputs and outputs. The input sensitivity control offers Nominal and High settings to accommodate studio-oriented and consumer-oriented source equipment. A polarity switch and ground-lift control provide useful adjustment options when integrating the subwoofer into a multi-component audio system.\u003c\/p\u003e\u003cp\u003eThe S8.4 also supports an optional momentary footswitch for subwoofer and high-pass-filter bypass. When activated, the subwoofer mutes and the connected monitors receive a full-range signal, allowing quick comparison of mixes with and without the subwoofer. Its front-firing port and low-profile cabinet support practical placement in many desktop and nearfield studio environments.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Glass Aramid Woofer:\u003c\/strong\u003e Provides dedicated low-frequency reproduction for studio monitoring systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e109-Watt Class D Amplifier:\u003c\/strong\u003e Delivers built-in continuous power without an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Position Crossover:\u003c\/strong\u003e Helps match bass integration to connected monitor speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced And RCA Connectivity:\u003c\/strong\u003e Accommodates XLR, TRS, and RCA line-level systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitch Bypass Control:\u003c\/strong\u003e Lets users compare full-range and sub-assisted monitoring quickly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Firing Vented Cabinet:\u003c\/strong\u003e Supports flexible placement while providing bass extension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe S8.4 uses a front-loaded, vented enclosure built from 15 mm and 18 mm reinforced MDF. It has a black vinyl wrap finish with a black-painted baffle, plus an EVA isolation pad. The cabinet measures 11 inches high, 16.125 inches wide, and 11.5 inches deep.\u003c\/p\u003e\u003cp\u003eConnect a mixer, audio interface, or other line-level source to the matching XLR, 1\/4-inch TRS, or RCA inputs, then route the corresponding outputs to powered monitors or to an external amplifier for passive monitors. Start with the volume low, select a crossover setting appropriate to the monitors, and use the polarity and ground-lift controls as needed. An optional momentary footswitch can be connected to engage subwoofer and high-pass-filter bypass; the footswitch is not included.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669429280838,"sku":"S8-4-NA","price":367.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61fQv2Rm--S.jpg?v=1784501376"},{"product_id":"krk-v6s4-na-6-5-powered-studio-reference-monitor","title":"KRK V6S4-NA 6.5\" Powered Studio Reference Monitor","description":"\u003cp\u003eThe KRK V6S4-NA is a single, two-way powered studio reference monitor designed for recording, mixing, mastering, and critical listening. Its self-powered design eliminates the need for a separate speaker amplifier, making it suitable for direct connection to an audio interface, monitor controller, or mixer. It is intended for nearfield monitoring in home, project, broadcast, and professional studio environments.\u003c\/p\u003e\u003cp\u003eA 6.5-inch woven Kevlar woofer and 1-inch Kevlar dome tweeter cover the low, mid, and high-frequency ranges in one compact monitor. The shared Kevlar driver material is engineered to support a consistent presentation through the crossover region. With a published frequency response of 49 Hz to 19 kHz, the V6 Series 4 is built to reveal mix details across a broad working range.\u003c\/p\u003e\u003cp\u003eBi-amplified Class-D power provides separate amplification for the woofer and tweeter. The low-frequency amplifier is rated at 125 watts and the high-frequency amplifier at 30 watts, for 155 watts total. KRK specifies a peak SPL of up to 115 dB, giving the monitor useful headroom for close-range production work.\u003c\/p\u003e\u003cp\u003eThe front-ported bass-reflex cabinet helps provide placement flexibility in rooms where rear wall clearance is limited. Its DSP-driven EQ system offers 49 selectable voicings for adapting the monitor to desk placement, wall proximity, room character, and listening preference. Low, low-mid, high-mid, and high-frequency adjustments allow practical correction without adding external processing.\u003c\/p\u003e\u003cp\u003eThe V6S4-NA is sold as one powered monitor, so a conventional stereo setup requires two units. Balanced XLR and 1\/4-inch TRS connections support integration with common studio sources. It can serve as a primary nearfield pair or as part of a multi-monitor setup where level matching and room correction are useful.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Kevlar Woofer:\u003c\/strong\u003e Provides dedicated midrange and low-frequency reproduction in a compact nearfield format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Kevlar Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a driver material matched to the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e155-Watt Bi-Amplified Design:\u003c\/strong\u003e Uses separate Class-D amplifier channels for the low- and high-frequency drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-Ported Cabinet:\u003c\/strong\u003e Supports flexible placement when working near room boundaries or walls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e49 DSP EQ Voicings:\u003c\/strong\u003e Helps tailor response for room, desk, and placement-related conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Combo Input:\u003c\/strong\u003e Accepts balanced XLR or 1\/4-inch TRS connections from studio equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V6 Series 4 uses an MDF and aluminum enclosure with a solid aluminum front baffle. Its woofer has a cast aluminum frame, Kevlar cone, and ferrite magnet, while the tweeter uses a Kevlar dome and ferrite magnet. An EVA foam pad on the bottom helps isolate the monitor from the supporting surface, and an optional protective grille is included for driver protection.\u003c\/p\u003e\u003cp\u003eFor stereo use, install one V6S4-NA for each channel and connect each monitor to a balanced source using XLR or 1\/4-inch TRS cabling. KRK recommends a nearfield arrangement with the monitors about 3 to 5 feet apart, aimed toward the listening position at approximately 60 degrees, with the acoustic axis near ear level. Begin with the EQ controls in their flat settings, then make small adjustments for desk loading, wall proximity, and room response.\u003c\/p\u003e","brand":"KRK","offers":[{"title":"Default Title","offer_id":45669429346374,"sku":"V6S4-NA","price":850.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/815WhFc4rsL.jpg?v=1784501442"}],"url":"https:\/\/audiowatt.store\/collections\/krk.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}