{"title":"Kenwood","description":null,"products":[{"product_id":"kenwood-ca-dr1130-dash-cam-hardwire-kit","title":"KENWOOD CA-DR1130 Dash Cam Hardwire Kit","description":"\u003cp\u003eThe KENWOOD CA-DR1130 is a dedicated hardwire kit designed to provide permanent vehicle power for compatible KENWOOD dash cameras. It replaces routine use of a vehicle’s 12-volt accessory outlet with a direct fuse-box installation. This is a practical option for drivers who want a cleaner dash cam installation and power available when the vehicle is parked.\u003c\/p\u003e\u003cp\u003eDesigned for the KENWOOD DRV-A310W, DRV-A510W, and DRV-A610W dash cameras, the CA-DR1130 connects through a USB Type-C power connection. Its regulated design accepts 12V or 24V vehicle electrical systems and supplies 5V power at up to 2A to the connected camera. It is intended only for compatible dashboard cameras.\u003c\/p\u003e\u003cp\u003eThe kit supports the compatible camera’s parking-monitoring functions by maintaining power after the engine is switched off. Depending on the dash camera setting, parking monitoring can use motion detection, vibration detection, or time-lapse recording. Parked monitoring time can extend up to 24 hours, though actual duration depends on vehicle battery condition and operating conditions.\u003c\/p\u003e\u003cp\u003eRather than changing a vehicle’s audio performance, the CA-DR1130 focuses on dependable power integration for a dash cam system. Separate ACC and constant-battery connections allow the compatible camera to recognize driving and parked states. This two-wire arrangement supports automatic transition into parking mode after the engine is turned off.\u003c\/p\u003e\u003cp\u003eThe CA-DR1130 is suited to cars, trucks, and other vehicles with compatible 12V or 24V electrical systems and a suitable fuse-box location. Four supplied fuse-tap styles help accommodate common automotive fuse formats. It is a useful upgrade path for owners of a compatible KENWOOD dash cam who want a concealed, hardwired installation instead of a plug-in power lead.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent Dash Cam Power:\u003c\/strong\u003e Connects a compatible KENWOOD dash cam to vehicle power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParking Mode Support:\u003c\/strong\u003e Enables compatible dash camera monitoring after engine shutdown.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V\/24V Compatibility:\u003c\/strong\u003e Works with standard 12V and heavy-duty 24V vehicle systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type-C Output:\u003c\/strong\u003e Delivers regulated 5V, 2A power to the dash cam.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Fuse-Tap Styles:\u003c\/strong\u003e Includes ATO\/C, ATM, LP-mini, and Micro2 fuse taps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eACC and Battery Leads:\u003c\/strong\u003e Uses switched and constant-power connections for automatic operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CA-DR1130 uses a compact inline power-regulator design with a USB Type-C camera connection, fused tap connections, and separate power and ground leads. KENWOOD specifies the electrical connections and included fuse formats, but does not publish construction-material details. Its layout is intended to support a concealed installation with the cable routed behind trim rather than across the cabin.\u003c\/p\u003e\u003cp\u003eInstallation requires access to the vehicle fuse box, an ACC\/switched circuit, a constant-power circuit, and an unpainted metal grounding point. Select the supplied fuse tap that matches the vehicle fuse type, retain the vehicle’s original fuse in the designated fuse-tap socket, and connect red to ACC and yellow to constant battery power. Review the vehicle manual and route wiring so it does not interfere with driving; professional installation may be appropriate for users unfamiliar with vehicle electrical systems.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632839417926,"sku":"CA-DR1130","price":40.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61W3WYzJ_mL.jpg?v=1784402744"},{"product_id":"kenwood-ca-ex3mr-3m-marine-remote-extension-cable","title":"Kenwood CA-EX3MR 3m Marine Remote Extension Cable","description":"\u003cp\u003eThe Kenwood CA-EX3MR is a 3-meter extension cable for compatible Kenwood marine wired remote-control installations. It adds needed reach between a compatible marine receiver and the remote's attached cable. This makes it useful when the receiver is installed in a protected compartment while the remote is mounted at a helm, cockpit, or other convenient control location.\u003c\/p\u003e\u003cp\u003eDesigned for use with the Kenwood KCA-RC107MR wired marine remote, the CA-EX3MR helps accommodate longer cable-routing paths in boat installations. It is intended for systems where the standard remote lead does not reach the desired mounting position. The cable extends control connectivity rather than adding audio channels, amplification, or source features.\u003c\/p\u003e\u003cp\u003eThe CA-EX3MR uses proprietary 8-pin connectors to maintain the proper connection between the compatible Kenwood remote and marine receiver. A male 8-pin connector connects to the receiver-side remote input, while a female 8-pin connector accepts the attached cable from the wired remote. Its black finish keeps the installation visually discreet alongside typical marine-system wiring.\u003c\/p\u003e\u003cp\u003eWith a nominal 3.0-meter length, the CA-EX3MR provides approximately 9.8 feet of additional reach. It supports a cleaner installation when the receiver and remote must be separated by cabinetry, bulkheads, console structures, or other boat components. Careful routing helps preserve service access and avoids placing strain on the connectors.\u003c\/p\u003e\u003cp\u003eThis cable is a practical system accessory for Kenwood marine receiver and remote configurations, including documented KMR-700U and KMR-440U applications with the KCA-RC107MR remote. It can also be used within a multi-remote layout when paired with the appropriate optional Kenwood branch cable. Confirm the receiver and remote model before purchase, as the 8-pin connection is proprietary.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Meter Extension:\u003c\/strong\u003e Adds approximately 9.8 feet of remote-control cable reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKCA-RC107MR Compatibility:\u003c\/strong\u003e Designed for Kenwood's wired marine remote control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProprietary 8-Pin Male End:\u003c\/strong\u003e Connects to the compatible receiver remote input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProprietary 8-Pin Female End:\u003c\/strong\u003e Accepts the wired remote's attached cable connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine System Accessory:\u003c\/strong\u003e Helps position remote controls farther from the receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Cable Finish:\u003c\/strong\u003e Blends neatly with typical marine electronics wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CA-EX3MR is a black remote-control extension cable built around Kenwood's proprietary 8-pin connection format. Its purpose-built male and female ends are arranged to bridge the receiver-side remote input and the attached lead of a compatible wired marine remote. No audio-processing, power-handling, or speaker-wire function is specified for this accessory.\u003c\/p\u003e\u003cp\u003eRoute the cable from the compatible receiver's remote-control input to the KCA-RC107MR cable connection, allowing adequate slack for service and avoiding sharp bends or pinch points. For installations with multiple compatible remotes, use the appropriate optional CA-Y107MR branch cable as required by the system layout. Professional installation is recommended when cable routing requires access behind consoles or through boat structures.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632845545542,"sku":"CA-EX3MR","price":45.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61C6KvWXnjL.jpg?v=1784402780"},{"product_id":"kenwood-ca-ex7mr-7m-marine-remote-extension-cable","title":"Kenwood CA-EX7MR 7m Marine Remote Extension Cable","description":"\u003cp\u003eThe Kenwood CA-EX7MR is a 7-meter extension cable designed for compatible Kenwood wired marine remote-control installations. It adds distance between the remote control and the compatible marine receiver, helping accommodate larger or more complex boat layouts. This is a system-expansion accessory rather than an audio source, amplifier, speaker, or receiver.\u003c\/p\u003e\u003cp\u003eIt is intended for boat owners who need to place a compatible wired remote away from the stereo’s mounting location. The cable can help route remote control access toward a helm, lounge area, swim platform, or another practical operating position. Its approximately 23-foot length provides substantially more reach than a short attached remote lead.\u003c\/p\u003e\u003cp\u003eThe CA-EX7MR carries remote-control connectivity; it does not add power, change speaker output, or process the sound of the audio system. Audio character and playback performance remain determined by the connected Kenwood receiver and the rest of the system. Its role is to preserve practical remote operation across a longer cable run.\u003c\/p\u003e\u003cp\u003eA proprietary 8-pin connection arrangement is used, with a male connector at one end and a female connector at the other. This configuration places the extension inline between the compatible marine receiver and the attached cable from a compatible wired remote. The purpose-built connection avoids the need to splice the remote cable for an extended installation.\u003c\/p\u003e\u003cp\u003eUse the CA-EX7MR as part of a compatible Kenwood marine audio setup when the remote’s existing cable does not reach the desired location. Verify receiver and remote compatibility before purchase, particularly when combining older KCA-RC107MR equipment with other Kenwood marine components. It is a straightforward upgrade path for extending wired remote access without replacing the main receiver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Meter Length:\u003c\/strong\u003e Adds approximately 23 feet of remote-cable reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Remote Extension:\u003c\/strong\u003e Designed for Kenwood wired marine remote installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Pin Male End:\u003c\/strong\u003e Connects to a compatible Kenwood receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Pin Female End:\u003c\/strong\u003e Accepts the compatible remote’s attached cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline Connection:\u003c\/strong\u003e Extends the remote cable without splicing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Accessory:\u003c\/strong\u003e Supports remote placement away from the stereo.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CA-EX7MR uses a black cable assembly with proprietary 8-pin male and female end connections. Its design is focused on creating an inline extension for Kenwood marine remote-control wiring. The cable is a dedicated accessory and is not a universal audio, RCA, antenna, USB, or speaker-wire extension.\u003c\/p\u003e\u003cp\u003eInstall the cable between a compatible Kenwood marine receiver and the attached lead from the compatible wired remote, with the male end connected at the receiver side and the female end joined to the remote cable. Plan the route before installation so the 7-meter length reaches the desired control location without strain on either connector. Confirm the remote and receiver model compatibility before routing or securing the cable.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632850722886,"sku":"CA-EX7MR","price":55.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51NP5BuMDVL.jpg?v=1784402809"},{"product_id":"kenwood-ca-y107mr-marine-remote-y-splitter-cable","title":"Kenwood CA-Y107MR Marine Remote Y-Splitter Cable","description":"\u003cp\u003eThe Kenwood CA-Y107MR is a compact Y-splitter cable for expanding a compatible Kenwood marine remote-control system. It connects two wired Kenwood marine remotes to one compatible marine receiver remote-control input. This accessory is intended for installations where control of the receiver is needed from more than one location.\u003c\/p\u003e\u003cp\u003eIt is well suited to larger boats with separate operating areas, such as a helm and an aft seating area. Instead of relocating a single remote or limiting control to one position, the cable creates two remote connection branches. The remotes and compatible Kenwood marine receiver are sold separately.\u003c\/p\u003e\u003cp\u003eThe CA-Y107MR does not amplify, process, or reproduce audio. Its role is to route remote-control connectivity within the marine audio system, allowing supported remote functions to be accessed from two locations. Audio performance remains dependent on the connected receiver, amplifiers, speakers, and source equipment.\u003c\/p\u003e\u003cp\u003eKenwood uses a proprietary 8-pin connection format for this adapter, with one male receiver-side connector and two female remote-side connectors. The 14-inch cable length keeps the branch point close to the receiver or an extension-cable junction. This purpose-built layout avoids using generic audio Y-adapters for a remote-control connection.\u003c\/p\u003e\u003cp\u003eThe CA-Y107MR can be used as part of a scalable Kenwood marine remote installation. Kenwood documentation shows compatible remote systems may be expanded further with an additional CA-Y107MR, and CA-EX3MR or CA-EX7MR extension cables may be used where longer runs are required. Confirm receiver and remote compatibility before installation, since this cable is designed for Kenwood proprietary marine remote connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Remote Branching:\u003c\/strong\u003e Connects two compatible wired marine remotes to one receiver remote input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-Inch Cable:\u003c\/strong\u003e Provides a short, organized connection point for remote-control wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProprietary 8-Pin Input:\u003c\/strong\u003e Uses one Kenwood-style 8-pin male receiver-side connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 8-Pin Outputs:\u003c\/strong\u003e Supplies two proprietary 8-pin female connections for remotes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine System Expansion:\u003c\/strong\u003e Supports multi-location receiver control on suitable boat installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKenwood Accessory Design:\u003c\/strong\u003e Intended for compatible Kenwood marine wired remote systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CA-Y107MR uses a compact Y-adapter layout with one receiver-side lead and two remote-side branches. Its black cable-and-connector design is made for integrating into a Kenwood marine remote-control harness, while published documentation does not specify the cable-jacket or connector-housing materials. The short 14-inch length helps position the split near the receiver or a compatible extension cable.\u003c\/p\u003e\u003cp\u003eConnect the male 8-pin connector to a compatible Kenwood receiver remote-control input, then connect a supported wired remote to each female branch. For installations requiring more distance, Kenwood documentation identifies the CA-EX3MR and CA-EX7MR as compatible extension-cable options for supported remote systems. Do not use this cable as an audio, speaker, USB, or standard data-cable splitter.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632856195142,"sku":"CA-Y107MR","price":50.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51F7uQq5yJL.jpg?v=1784402843"},{"product_id":"kenwood-cmos-230lp-universal-backup-camera-with-license-plate-bracket","title":"KENWOOD CMOS-230LP Universal Backup Camera With License Plate Bracket","description":"\u003cp\u003eThe KENWOOD CMOS-230LP is a universal rear-view backup camera package built to add a clear view behind a vehicle when parking, reversing, or maneuvering in confined spaces. It pairs the compact CMOS-230 camera with a license plate mounting attachment for a clean, low-profile rear installation. The camera is designed for vehicles using a compatible display, receiver, or monitor with a composite RCA camera-video input.\u003c\/p\u003e\u003cp\u003eThis camera is well suited to drivers upgrading an aftermarket multimedia receiver, as well as owners adding rearward visibility to a car, truck, SUV, van, or similar vehicle. Its approximately 128-degree horizontal and 103-degree vertical field of view is intended to show a broad near-field area behind the vehicle. The mirror-image video output is configured for rear-view use, helping the image correspond with the orientation drivers expect when backing up.\u003c\/p\u003e\u003cp\u003eA 1\/3.6-inch color CMOS sensor with approximately 330,000 effective pixels provides the imaging foundation for the CMOS-230LP. The wide-angle f\/2.2 lens uses a 1.12 mm focal length, balancing a broad view with a compact camera housing. Its illumination range is rated from approximately 0.9 to 100,000 lux for use across varying ambient-light conditions.\u003c\/p\u003e\u003cp\u003eThe CMOS-230LP uses a wired composite video connection and includes a camera lead plus a long power\/video harness to support routing from the rear of the vehicle to the dash area. The camera operates from a switched vehicle power source and includes a 2A fused power connection. It is a practical fit for systems where a compatible receiver or monitor is already in place but a rear camera has not yet been added.\u003c\/p\u003e\u003cp\u003eThe included license plate mounting attachment places the camera near the plate area without requiring a full license plate frame. Its powder-coated finish complements the weather-resistant camera installation, while the compact camera measures only 23.4 mm on each visible face. The package offers a straightforward rear-camera upgrade path while retaining the option to use the camera's supplied universal mounting hardware where appropriate.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Angle Rear View:\u003c\/strong\u003e Approximately 128° horizontal and 103° vertical coverage helps show more of the area behind the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor CMOS Sensor:\u003c\/strong\u003e A 1\/3.6-inch sensor provides approximately 330,000 effective pixels for rear-view imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMirror-Image Output:\u003c\/strong\u003e Rear-view image orientation is designed to match the perspective used for backing up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComposite Video Connection:\u003c\/strong\u003e Connects to compatible receivers or monitors with a composite RCA camera-video input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate Mount Included:\u003c\/strong\u003e The supplied attachment supports a tidy installation near the rear license plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Camera Design:\u003c\/strong\u003e Built for exterior rear-camera placement in normal vehicle operating conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CMOS-230 camera has a compact 23.4 x 23.4 x 23.9 mm housing and weighs approximately 21 g without its cable. The included license plate mounting attachment has a powder-coated finish and measures 179 x 35 x 29 mm. This package includes the CMOS-230 camera, license plate mounting attachment, mounting hardware, camera cord, power cable, and documentation.\u003c\/p\u003e\u003cp\u003eFor installation, mount the camera at the rear of the vehicle with the KENWOOD logo at the top, then adjust the angle so the bumper or rear of the vehicle is visible at the bottom of the display. Route the 1.5 m camera cord to the 7.5 m power\/video cable, connect composite video to a compatible rear-camera or external-video input, ground the black wire to vehicle chassis metal, and connect the red wire to switched accessory power or an appropriate reverse-triggered source. Avoid automatic car washes and high-pressure water spray, and verify that the camera bracket and retaining hardware remain secure.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632864649286,"sku":"CMOS-230LP","price":120.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51UVwWkpxpL.jpg?v=1784402888"},{"product_id":"kenwood-cmos-320lp-multi-view-camera-with-license-plate-mount","title":"KENWOOD CMOS-320LP Multi-View Camera with License Plate Mount","description":"\u003cp\u003eThe KENWOOD CMOS-320LP is a front or rear multi-view vehicle camera package that combines the CMOS-320 camera, a license plate mounting attachment, and a wired switch unit. It is designed to add a camera view to a compatible video monitor or receiver, helping drivers see areas around the vehicle while parking and maneuvering. The included license plate attachment offers an external mounting option without requiring a custom camera housing.\u003c\/p\u003e\u003cp\u003eThis camera is suited to drivers upgrading an aftermarket multimedia system, replacing a basic rear camera, or adding front-view visibility to a compatible KENWOOD system. Its 1\/3.6-inch color CMOS sensor uses approximately 330,000 effective pixels and a wide-angle lens for a broad viewing area. The camera can output a mirrored image for rear-view use or a normal image for front-view use.\u003c\/p\u003e\u003cp\u003eThe CMOS-320 provides four selectable display modes: Ultra Wide, Wide, Overhead, and Corner. Ultra Wide View covers approximately 195 degrees horizontally, while Wide View covers approximately 135 degrees horizontally. Overhead and Corner modes use the camera's image processing to provide alternate perspectives for low-speed vehicle positioning.\u003c\/p\u003e\u003cp\u003eAn included switch unit allows the driver to change view modes, show or hide guidelines, and access camera adjustments when the camera is not controlled through a compatible KENWOOD receiver. When connected to a KENWOOD control unit equipped with the camera-control function, view selection and camera adjustment can be handled from the receiver touchscreen. The camera also supports use with a monitor that has a rear-camera or external RCA video input.\u003c\/p\u003e\u003cp\u003eThe CMOS-320LP is built for exterior installation with a waterproof camera design and a compact camera body. Its 7.5-meter power cable helps support routing from the camera location to vehicle power and the display system. It can be used as a single rear camera or, in compatible KENWOOD systems, as part of a front-and-rear camera arrangement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Selectable Views:\u003c\/strong\u003e Choose Ultra Wide, Wide, Overhead, or Corner display modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Or Rear Use:\u003c\/strong\u003e Supports normal front-view or mirrored rear-view imaging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e195° Horizontal Coverage:\u003c\/strong\u003e Ultra Wide View provides a broad viewing angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Switch Unit:\u003c\/strong\u003e Changes views, controls guidelines, and accesses setup functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate Mount:\u003c\/strong\u003e Includes a powder-coated external mounting attachment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Video Compatibility:\u003c\/strong\u003e Connects to monitors with rear-camera or external video input.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe camera uses a compact waterproof housing measuring 23.4 x 23.4 x 26.1 mm and weighs approximately 23 g without its cable. Its wide-angle lens has a 1.05 mm focal length and F2.0 aperture. The included license plate mounting attachment has a powder-coated finish and measures 179 x 35 x 29 mm.\u003c\/p\u003e\u003cp\u003eFor a rear installation, KENWOOD specifies mounting the CMOS-320 at least 50 cm above the ground; for front installation, the recommended height is 30 to 80 cm. Connect the video lead to a rear-camera or external video input, connect the power lead to switched accessory power through its 2 A fuse, and ground it to the vehicle chassis. Temporarily position the camera, adjust its angle and guidelines, then secure the installation after confirming the image and view settings.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632871628870,"sku":"CMOS-320LP","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61iGT9NpAHL.jpg?v=1784402929"},{"product_id":"kenwood-excelon-cmos-740hd-hd-rear-view-camera","title":"Kenwood Excelon CMOS-740HD HD Rear View Camera","description":"\u003cp\u003eThe Kenwood Excelon CMOS-740HD is a compact HD rear view camera designed to add a clearer reversing view to a compatible Kenwood multimedia receiver. It captures a 1280 x 720 image and sends its signal through an HD-TVI connection for use with receivers that support an HD camera input. It is intended to supplement normal visual checks while parking, reversing, and maneuvering at low speed.\u003c\/p\u003e\u003cp\u003eThis camera is suited to drivers upgrading a compatible Kenwood display system who want more image detail than a conventional low-resolution backup camera provides. Its wide-angle lens delivers a 180-degree horizontal field of view to help show a broad area behind the vehicle. The camera outputs a mirror image configured for rear-view use.\u003c\/p\u003e\u003cp\u003eHDR technology helps preserve visible detail when bright and dark areas appear in the same scene. This is useful around backlit driveways, nighttime street lighting, garages, and other high-contrast conditions. The 1\/3.8-inch color CMOS sensor records at 30 frames per second for a steady live camera view.\u003c\/p\u003e\u003cp\u003eThe CMOS-740HD is built for exterior vehicle use with an IP67 water- and dust-resistance rating. It operates from 12V or 24V DC vehicle electrical systems, making it appropriate for many passenger vehicles and commercial applications. Its specified operating temperature range is -30°C to +85°C.\u003c\/p\u003e\u003cp\u003eAs part of a compatible Kenwood camera system, the CMOS-740HD connects to an HD-camera-capable navigation system or video monitor through the supplied camera wiring and power unit. The compact camera housing can be positioned at the rear of the vehicle and aimed to include the bumper at the bottom of the display. A compatible Kenwood receiver or monitor is required and sold separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e720p HD Image:\u003c\/strong\u003e Delivers a 1280 x 720 camera image on compatible HD Kenwood displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR Processing:\u003c\/strong\u003e Helps retain scene detail in challenging bright-to-dark lighting conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180° Horizontal View:\u003c\/strong\u003e Provides a broad rearward viewing angle for parking and maneuvering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD-TVI Output:\u003c\/strong\u003e Transmits HD video to a compatible HD camera input over RCA-style video wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12V\/24V Compatibility:\u003c\/strong\u003e Supports vehicles with 12V or 24V DC electrical systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Helps protect the camera against dust and temporary water immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe camera uses a compact 31.1 x 23.0 x 25.2 mm housing with a wide-angle 1.86 mm f\/2.0 lens and a separate power unit. A supplied mounting bracket supports adhesive mounting and can also be secured with the included clamping screw. The camera assembly weighs 33.2 g without its cable.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended because routing, grounding, fused accessory-power connection, and camera positioning require vehicle-specific work. Mount the camera centrally where it does not obstruct the license plate, orient the Kenwood logo upward, and adjust the angle so the vehicle bumper is visible at the bottom of the screen. Connect it only to a monitor or receiver with an HD-camera-compatible input, and use the supplied 2A fuse in the power connection.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632878903366,"sku":"CMOS-740HD","price":422.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51XnvHRpKCL.jpg?v=1784402971"},{"product_id":"kenwood-cmos-740hdlp-hd-license-plate-backup-camera","title":"Kenwood CMOS-740HDLP HD License Plate Backup Camera","description":"\u003cp\u003eThe Kenwood CMOS-740HDLP is an HD rear-view camera package designed to add a clear backup view to select compatible Kenwood and JVC multimedia receivers. It combines the CMOS-740HD camera with a CA-LPM10 license plate mounting attachment for a clean, vehicle-friendly installation. The camera is intended to supplement rearward visibility while parking and reversing.\u003c\/p\u003e\u003cp\u003eIts 1280 x 720 HD image output gives compatible HD-capable receivers a more detailed camera view than standard-definition systems. A 180-degree horizontal viewing angle helps show a broad area behind the vehicle, while the 103-degree vertical angle supports useful coverage near the bumper. The camera presents a mirrored rear-view image for familiar backup-camera operation.\u003c\/p\u003e\u003cp\u003eHigh Dynamic Range processing helps the camera manage scenes containing both bright and dark areas. This is useful when backing out of shaded driveways, facing bright daylight, or using the camera near street lighting at night. The 1\/3.8-inch color CMOS sensor operates across object illumination levels from 1.0 lux to 100,000 lux.\u003c\/p\u003e\u003cp\u003eThe CMOS-740HD uses an HD-TVI video interface, so it requires a receiver or monitor with a compatible HD camera input. It is not a universal upgrade for every composite-camera input or factory display. Confirm HD camera-input compatibility with the intended receiver before installation.\u003c\/p\u003e\u003cp\u003eThe included CA-LPM10 mounting attachment positions the camera at the license plate area without requiring a separate camera-mount solution. The camera is IP67 rated for resistance to dust and water intrusion, and it supports 12-volt and 24-volt vehicle electrical systems. This package is a practical fit for compatible head-unit upgrades where an integrated HD backup view is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e720p HD Resolution:\u003c\/strong\u003e Delivers a 1280 x 720 image to compatible HD displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR Processing:\u003c\/strong\u003e Helps retain detail in high-contrast lighting conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Angle Lens:\u003c\/strong\u003e Provides a 180-degree horizontal field of view.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD-TVI Output:\u003c\/strong\u003e Sends HD camera video through a compatible input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Resists dust and water for exterior mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate Mount:\u003c\/strong\u003e Includes the CA-LPM10 mounting attachment and hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe compact camera uses a wide-angle 1.86 mm F2.0 lens and a 1\/3.8-inch color CMOS sensor. Its camera housing measures 31.1 x 23.0 x 25.2 mm and weighs 33.2 g without the cable. The included license plate attachment has a powder-coated finish and measures 179 x 35 x 29 mm.\u003c\/p\u003e\u003cp\u003eInstall the camera at the rear license plate area, route the camera and power wiring safely, and connect it to a compatible HD-TVI camera input. The power harness should connect to switched accessory power and vehicle ground, using the specified 2A fuse. Professional installation is recommended because mounting and wiring require vehicle-specific routing and proper verification of receiver compatibility.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632891093062,"sku":"CMOS-740HDLP","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61lJ6dgp1qL.jpg?v=1784403044"},{"product_id":"kenwood-dax8000s-8-single-din-digital-media-receiver","title":"Kenwood DAX8000S 8\" Single-DIN Digital Media Receiver","description":"\u003cp\u003eThe Kenwood DAX8000S is an 8-inch digital multimedia receiver designed for direct-replacement vehicle upgrades where a conventional radio chassis and separate display installation are needed. Its flush-mount monitor and compact single-DIN source unit help accommodate dashboards with limited space behind the screen. It is intended for drivers who want modern smartphone integration while retaining a clean, factory-oriented installation approach.\u003c\/p\u003e\u003cp\u003eWired and wireless Apple CarPlay and Android Auto provide access to supported navigation, calls, messages, and audio apps through the capacitive touchscreen or voice control. Split-screen operation can display a CarPlay or Android Auto interface alongside a Kenwood source. Built-in Bluetooth, Wi-Fi, and HD Radio add everyday connectivity and broadcast-radio options.\u003c\/p\u003e\u003cp\u003eThe DAX8000S supports high-resolution audio playback through its USB connection, with a 24\/32-bit D\/A converter and playback support for common lossless and compressed formats. A 13-band graphic equalizer and digital time alignment let installers and listeners tailor tonal balance and staging for the vehicle. Three 4-volt preouts provide a solid signal foundation for external amplifiers and a more advanced sound system.\u003c\/p\u003e\u003cp\u003eIts 1280 x 720 HD LCD uses an electrostatic capacitive touch panel, LED backlighting, and a wide 8-inch viewing area for clear control of media and vehicle functions. The display and chassis are separate, allowing the chassis to be installed vertically or horizontally when vehicle packaging requires flexibility. An optional extension cable is available if the supplied display-to-chassis cable length is not sufficient for the installation.\u003c\/p\u003e\u003cp\u003eFor camera-equipped or safety-focused upgrades, the receiver offers four camera inputs and compatibility with supported HD front and rear cameras. It is also ready to work with the optional Kenwood DRV-N520 dash camera, which can be controlled and viewed from the touchscreen. When used with compatible iDatalink Maestro integration hardware and vehicle-specific installation parts, it can support retention of selected factory controls and vehicle information features.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch HD Touchscreen:\u003c\/strong\u003e A 1280 x 720 capacitive display provides clear viewing and responsive operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired or wireless Apple CarPlay and Android Auto for compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparated Display And Chassis:\u003c\/strong\u003e Allows more installation flexibility than an all-in-one receiver design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Camera Inputs:\u003c\/strong\u003e Accommodates multiple optional camera views for parking and vehicle monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound-Tuning Tools:\u003c\/strong\u003e A 13-band EQ and digital time alignment help tune system response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Volt Preouts:\u003c\/strong\u003e Three preouts support connection to external amplifiers and expanded audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DAX8000S combines an 8-inch LCD monitor with a separate compact receiver chassis. Its screen uses a TFT active-matrix LCD, LED backlighting, and an electrostatic capacitive touch panel. The flush-mount display arrangement is designed for direct-replacement integrations rather than a typical floating-screen installation.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended because fitment depends on the vehicle and may require vehicle-specific direct-replacement parts, wiring interfaces, and compatible iDatalink Maestro hardware. The chassis measures 178 x 50 x 105 mm and may be mounted vertically or horizontally, while the display measures 190 x 120 x 28 mm. Use the USB-C connection for supported smartphone integration, USB media playback, and compatible-device charging up to 3.0 amps.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632899383366,"sku":"DAX8000S","price":1250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/510HBQ7bViL.jpg?v=1784403085"},{"product_id":"kenwood-ddx5707s-double-din-6-8-dvd-receiver","title":"Kenwood DDX5707S Double DIN 6.8\" DVD Receiver","description":"\u003cp\u003eThe Kenwood DDX5707S is a double-DIN multimedia DVD receiver designed to modernize an older factory radio with touchscreen control, smartphone integration, Bluetooth, and camera capability. Its 6.75-inch capacitive touchscreen provides a central interface for media, calls, navigation apps, and vehicle-audio adjustments. It is a practical fit for drivers who want wired Apple CarPlay or Android Auto along with traditional disc and radio playback.\u003c\/p\u003e\u003cp\u003eFor everyday listening, the DDX5707S combines AM\/FM reception, USB media playback, Bluetooth audio, and DVD\/CD support in one dashboard component. It can play common digital audio formats including MP3, WMA, AAC, WAV, FLAC, and Vorbis files from USB storage. The built-in four-channel amplifier supports conventional 4- to 8-ohm vehicle speakers.\u003c\/p\u003e\u003cp\u003eSound tuning is centered on a 13-band graphic equalizer, adjustable crossover settings, speaker level controls, and digital time alignment. These tools let an installer tailor the system for speaker locations and listening position rather than relying on a fixed sound preset. A dedicated subwoofer output and 2-volt preouts provide a path to external amplification and bass upgrades.\u003c\/p\u003e\u003cp\u003eThe receiver uses a transparent TN LCD panel with TFT active-matrix drive, 800 x 480 resolution, RGB pixel arrangement, and LED backlighting. Its capacitive touch panel is intended for direct, responsive control of the source and setup menus. Bluetooth 4.1 supports hands-free calling and wireless audio streaming, with SBC and AAC codec support.\u003c\/p\u003e\u003cp\u003eFor a broader vehicle upgrade, the DDX5707S includes a rear-view camera input and a steering-wheel remote input. It also supports SiriusXM when used with a compatible optional SiriusXM Connect Vehicle Tuner. Wired USB smartphone connection is used for Apple CarPlay and Android Auto, making this receiver suitable for systems that prioritize dependable connected-phone operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.75-Inch Capacitive Touchscreen:\u003c\/strong\u003e Provides a clear, touch-based interface for media, calls, apps, and audio settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Apple CarPlay:\u003c\/strong\u003e Connects a compatible iPhone by USB for supported navigation, messaging, music, and Siri functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Android Auto:\u003c\/strong\u003e Connects a compatible Android phone by USB for driving-focused apps, calls, music, and guidance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.1:\u003c\/strong\u003e Supports hands-free calling and wireless audio playback with compatible mobile devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ And Time Alignment:\u003c\/strong\u003e Allows detailed tone shaping and timing adjustment for a more tailored in-vehicle setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Camera Input:\u003c\/strong\u003e Adds compatibility with an optional rear-view camera for easier reversing visibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DDX5707S uses a fixed 6.75-inch widescreen display built around a transparent TN LCD panel, TFT active-matrix drive system, and LED backlighting. Its double-DIN chassis measures 178 x 100 x 153 mm without the sleeve, while the installed outer dimensions with sleeve are 182 x 112 x 153 mm. A trim plate, mounting sleeve, wiring connectors, microphone, and mounting hardware are supplied for installation.\u003c\/p\u003e\u003cp\u003eConfirm dashboard fitment and vehicle-specific wiring needs before purchase, as many vehicles require an appropriate dash kit, wiring interface, antenna adapter, or steering-wheel-control interface. Connect compatible iPhone or Android devices through the USB lead for CarPlay or Android Auto, and route the included microphone toward the driver for hands-free use. A compatible optional SiriusXM Connect Vehicle Tuner is required for SiriusXM service, while a separate compatible camera is required to use the rear-camera input.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632908722246,"sku":"DDX5707S","price":745.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71iUDVB93YL.jpg?v=1784403136"},{"product_id":"kenwood-ddx9707s-6-95-double-din-dvd-receiver","title":"Kenwood DDX9707S 6.95\" Double DIN DVD Receiver","description":"\u003cp\u003eThe Kenwood DDX9707S is a double-DIN multimedia receiver with a 6.95-inch WVGA touchscreen, built-in DVD\/CD playback, Bluetooth, Wi-Fi connectivity, and AM\/FM radio. It updates a factory radio with modern phone integration while retaining a physical disc source for drivers who still use CDs or DVDs. Wired and wireless Apple CarPlay and Android Auto provide familiar access to compatible navigation, calling, messaging, and music functions.\u003c\/p\u003e\u003cp\u003eThis receiver suits drivers looking for a complete infotainment upgrade rather than a basic digital-media deck. It supports wireless Android mirroring on select devices and USB mirroring for iPhone and Android, giving compatible phones additional display options. Bluetooth supports hands-free calling and audio streaming, with Music Mix support for up to five paired devices and switching between two connected phones.\u003c\/p\u003e\u003cp\u003eFor audio playback, the DDX9707S supports high-resolution WAV and FLAC files up to 192 kHz\/24-bit through USB. Its built-in amplifier is rated at 22 watts RMS by four channels at less than 1% THD, with 50 watts peak by four channels. A 13-band graphic EQ, digital time alignment, adjustable crossovers, and subwoofer-level control provide useful tuning tools for factory-speaker or amplified systems.\u003c\/p\u003e\u003cp\u003eThe receiver uses dual-band Wi-Fi and Bluetooth 5.0 to support its wireless connectivity functions. Its 6.95-inch TN LCD uses an 800 x 480 RGB display arrangement with LED backlighting, while the clear resistive touch panel is designed to reduce glare. Dual rear USB connections allow separate music and charging connections, with up to 1.5A charging for selected Android devices and 1.0A for iPhone.\u003c\/p\u003e\u003cp\u003eThe DDX9707S can serve as the control center for a broader vehicle upgrade. It provides three 4-volt preouts for external amplifiers, supports up to four camera inputs, and is compatible with the optional DRV-N520 dash camera through Dash Camera Link. With a compatible iDatalink Maestro RR interface and supported vehicle, it can display selected factory vehicle information, climate data, performance information, TPMS data, and retained factory camera functions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired and wireless Apple CarPlay and Android Auto with compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution USB Audio:\u003c\/strong\u003e Plays FLAC and WAV files up to 192 kHz\/24-bit from USB storage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In DVD\/CD Drive:\u003c\/strong\u003e Plays DVD-Video, Video CD, CD-DA, and compatible disc media files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Sound Tuning:\u003c\/strong\u003e EQ, digital time alignment, crossovers, and subwoofer adjustment tailor system response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Camera Capability:\u003c\/strong\u003e Accommodates front, rear, side, and compatible dash-camera viewing configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 4V Preouts:\u003c\/strong\u003e Provides a strong signal connection for external amplifiers and expanded audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DDX9707S is built around a 6.95-inch wide TN LCD with TFT active-matrix drive, LED backlighting, and 1,152,000 pixels. Its front panel uses a clear resistive touch interface, and the display has an RGB striped pixel arrangement. Variable-color button illumination can be adjusted to coordinate with compatible dashboard lighting.\u003c\/p\u003e\u003cp\u003eThe chassis measures 178 x 100 x 160 mm, the standard double-DIN radio opening size, and installs with the supplied sleeve or vehicle-specific mounting hardware where applicable. The package includes a wiring harness, trim ring, two USB extension cables, GPS antenna, Bluetooth microphone, mounting screws, and removal tools. Confirm vehicle fitment and obtain any vehicle-specific dash kit, wiring interface, steering-wheel-control adapter, antenna adapter, or iDatalink Maestro RR module needed for the intended installation.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632918061126,"sku":"DDX9707S","price":1000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71MOpdekkKL.jpg?v=1784403186"},{"product_id":"kenwood-dmx1038s-10-1-double-din-digital-media-receiver","title":"Kenwood DMX1038S 10.1\" Double DIN Digital Media Receiver","description":"\u003cp\u003eThe Kenwood DMX1038S is a double DIN digital multimedia receiver built around a large 10.1-inch floating HD touchscreen. It modernizes a compatible vehicle with smartphone integration, Bluetooth calling and streaming, camera connectivity, and expanded audio controls. The compact receiver chassis supports installations where a conventional double DIN opening is available.\u003c\/p\u003e\u003cp\u003eThis receiver is suited to drivers who want a larger interface for navigation, calls, music, and vehicle-camera viewing without adding a separate display. Apple CarPlay and Android Auto work wirelessly or through USB, allowing compatible phones to provide familiar app-based functions on the in-dash screen. Built-in Wi-Fi and Bluetooth support the wireless connection features and everyday phone pairing.\u003c\/p\u003e\u003cp\u003eFor sound-system upgrades, the DMX1038S provides a built-in four-channel amplifier, three 4-volt preouts, a 13-band graphic EQ, digital time alignment, and selectable 2-way or 3-way crossover operation. Its USB playback section supports high-resolution audio files and sampling frequencies up to 192 kHz. These tools make it practical as a foundation for factory-speaker upgrades or for an external-amplifier system.\u003c\/p\u003e\u003cp\u003eThe 1280 x 720 capacitive-touch display uses an LED-backlit LCD panel and an optically bonded construction to reduce internal reflections. Its floating-panel mechanism adjusts for depth, height, tilt, and left-to-right position, helping the screen clear surrounding dash contours and controls. The display can also show split-screen operation with compatible Apple CarPlay or Android Auto use.\u003c\/p\u003e\u003cp\u003eFour camera inputs expand the DMX1038S beyond a basic backup-camera receiver. It supports rear, front or dash-camera, and third-view camera connections, with HD camera compatibility at the rear and front\/dash-camera inputs. HD Radio is built in, while SiriusXM operation requires a compatible optional tuner; iDatalink Maestro compatibility can add supported factory-control and vehicle-data retention when used with the appropriate interface.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.1-Inch HD Floating Display:\u003c\/strong\u003e Capacitive touchscreen provides a large, adjustable interface for daily driving functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired and wireless Apple CarPlay and Android Auto with compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Camera Inputs:\u003c\/strong\u003e Connect rear, front or dash, and third-view cameras for expanded visibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound-Tuning Tools:\u003c\/strong\u003e 13-band EQ, time alignment, and crossover controls tailor system response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution USB Playback:\u003c\/strong\u003e Plays supported audio files with sampling support up to 192 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Integration Options:\u003c\/strong\u003e Works with compatible iDatalink Maestro interfaces and SiriusXM accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX1038S combines a compact 178 x 50 x 158 mm chassis with a separate 10.1-inch floating monitor assembly. The LCD uses a TFT active-matrix design, LED backlighting, and an optically bonded touch\/display structure. The screen position can be adjusted in depth, height, tilt, and side-to-side placement to accommodate a range of dash layouts.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended to confirm double DIN fitment, dash-panel clearance, wiring compatibility, and correct camera integration. Set the display slider position before the main unit is installed, as it cannot be changed afterward. A vehicle-specific dash kit, wiring harness, antenna adapter, steering-wheel-control interface, cameras, external amplifiers, or iDatalink Maestro module may be required depending on the vehicle and desired functions.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632926679110,"sku":"DMX1038S","price":1600.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71inWZYh_nL.jpg?v=1784403234"},{"product_id":"kenwood-dmx129bt-double-din-6-8-digital-multimedia-receiver","title":"Kenwood DMX129BT Double DIN 6.8\" Digital Multimedia Receiver","description":"\u003cp\u003eThe Kenwood DMX129BT is a double-DIN digital multimedia receiver designed to modernize a compatible vehicle dashboard with a large touchscreen interface, Bluetooth connectivity, USB media playback, and rear-camera capability. Its 6.8-inch WVGA display provides a clear central control point for music, radio, hands-free calling, and supported USB content. It is a practical upgrade for drivers replacing a basic factory radio or adding screen-based convenience without a disc player.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth supports hands-free phone calls and wireless music streaming from a compatible device. The receiver supports common Bluetooth calling, phonebook, audio-streaming, and audio-control profiles, while the touchscreen keeps essential functions within easy reach. For Android users, USB mirroring can display and provide touch control for supported phone apps when used with the required Kenwood Mirroring OB app, Bluetooth connection, and USB cable.\u003c\/p\u003e\u003cp\u003eSound tuning is centered on a 13-band graphic equalizer and digital time alignment, giving installers and listeners useful control over tonal balance and staging. Adjustable high-pass and low-pass filters help integrate the receiver with door speakers, external amplifiers, and a subwoofer system. Its built-in amplifier delivers 45 watts maximum power per channel and 16 watts per channel of full-bandwidth power for compatible 4- to 8-ohm speakers.\u003c\/p\u003e\u003cp\u003eThe capacitive touchscreen uses a TFT active-matrix TN LCD with LED backlighting and an 800 x 480 display resolution. USB playback supports a broad selection of audio files, including MP3, WMA, WAV, AAC, and FLAC, plus compatible MPEG, H.264, and MKV video files. An AM\/FM tuner remains onboard for conventional radio listening alongside USB and Bluetooth sources.\u003c\/p\u003e\u003cp\u003eFor vehicle integration, the DMX129BT includes a rear-view camera input with adjustable parking guidelines and two 2-volt preouts with subwoofer output capability. Its 75 mm short-chassis depth can make routing and dashboard installation more manageable in vehicles with limited rear clearance. The receiver can serve as the control center of a basic speaker replacement system or as a source unit feeding external amplification and a subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch WVGA Touchscreen:\u003c\/strong\u003e Provides a large, capacitive-touch interface for source selection, settings, and media control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAndroid USB Mirroring:\u003c\/strong\u003e Displays and controls supported Android apps through USB with the required app and Bluetooth connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Supports hands-free calling, phonebook access, and wireless music streaming from compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ And Time Alignment:\u003c\/strong\u003e Allows detailed sound shaping and listening-position adjustments for a more tailored system setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear-Camera Input:\u003c\/strong\u003e Adds compatibility with a rear-view camera and adjustable on-screen parking guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo 2V Preouts:\u003c\/strong\u003e Provides signal connections for external amplifiers, including subwoofer-system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX129BT has a short 75 mm chassis and a front panel built around a capacitive touch interface. Its 6.75-inch diagonal viewing area uses a transparent TN LCD, TFT active-matrix drive system, RGB-striped pixel arrangement, and LED backlighting. The included display format is intended for in-dash multimedia control rather than a motorized or detachable-screen design.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a double-DIN receiver and use the appropriate vehicle-specific dash kit, wiring harness, antenna adapter, and steering-wheel-control interface when needed. Connect the receiver to a 12V DC negative-ground vehicle electrical system, use 4- to 8-ohm speakers, and wire a compatible camera separately if rear-view functionality is desired. Android mirroring requires a supported Android device, the Mirroring OB for KENWOOD app, a USB connection, and Bluetooth pairing.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632933756998,"sku":"DMX129BT","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61koWQ4E76L.jpg?v=1784403277"},{"product_id":"kenwood-dmx4710s-6-8-double-din-digital-media-receiver","title":"KENWOOD DMX4710S 6.8\" Double DIN Digital Media Receiver","description":"\u003cp\u003eThe KENWOOD DMX4710S is a 6.8-inch digital multimedia receiver designed to modernize a vehicle with touchscreen control, smartphone integration, Bluetooth calling, and audio streaming. It is a practical upgrade for drivers who want access to navigation, music, calls, and messages through a centralized in-dash interface. Apple CarPlay and Android Auto connect through USB for familiar phone-based control while driving.\u003c\/p\u003e\u003cp\u003eIts built-in amplifier delivers up to 50 watts by four channels maximum, with 22 watts by four channels of full-bandwidth power at less than 1% THD. A 13-band graphic equalizer, high-pass filter, low-pass filter, and digital time alignment provide useful tuning tools for factory-replacement speakers or a more developed aftermarket system. Front\/rear preouts and a dedicated subwoofer output support expansion with external amplification.\u003c\/p\u003e\u003cp\u003eThe 6.8-inch WSVGA display uses a capacitive touch panel and 1024 x 600 resolution for responsive control and detailed on-screen information. LED backlighting, a TN LCD panel, and RGB stripe pixel arrangement support clear menu, media, and smartphone-interface viewing. The unit also plays compatible audio and video files from USB storage.\u003c\/p\u003e\u003cp\u003eBluetooth 5.0 provides hands-free calling and wireless music streaming, with support for common phonebook, audio streaming, and remote-control profiles. The USB Type-A connection supports USB 2.0 High Speed devices, several common file systems, and up to 2.1A charging for compatible smartphones. USB mirroring through MirrorAPP+ is available with selected compatible smartphones.\u003c\/p\u003e\u003cp\u003eThe DMX4710S is suited to vehicles needing a shallow multimedia receiver chassis while retaining a large touchscreen interface. It is iDatalink Maestro RR\/RR2 ready for supported vehicle-integration upgrades, including compatibility with retained factory features on applicable vehicles. An optional rear-view camera can add adjustable parking guidelines, while an optional SiriusXM tuner can add satellite-radio capability.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired CarPlay And Android Auto:\u003c\/strong\u003e Connect a compatible smartphone by USB for familiar voice and touchscreen access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch WSVGA Touchscreen:\u003c\/strong\u003e Capacitive 1024 x 600 display provides detailed, responsive on-screen control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ And Time Alignment:\u003c\/strong\u003e Tailor tonal balance and listening position for the vehicle cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Supports hands-free calls, music streaming, phonebook access, and playback control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Expansion Outputs:\u003c\/strong\u003e Two 2.5V preouts plus a subwoofer output support external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaestro And Camera Ready:\u003c\/strong\u003e Supports compatible iDatalink integration and an optional rear-view camera.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX4710S combines a clear glass capacitive touch panel with an LED-backlit TN LCD display and a short-depth chassis. Its 6.8-inch wide screen uses a 1024 x 600 RGB-striped display with 99.99% effective pixels. The reduced chassis depth is intended to simplify placement in vehicles with limited space behind the dash.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific dash opening, wiring, steering-wheel-control retention requirements, and camera connections before installation. The main unit installation size without sleeve is 178 x 100 x 86 mm, and it operates from a 12V DC vehicle electrical system. Use the USB connection for Apple CarPlay and Android Auto; iDatalink Maestro RR\/RR2 hardware, a rear-view camera, SiriusXM tuner, and KCA-RCDV340 remote are optional accessories sold separately.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632945225798,"sku":"DMX4710S","price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/818w5jpR4jL.jpg?v=1784403342"},{"product_id":"kenwood-dmx5710s-double-din-6-8-digital-media-receiver","title":"Kenwood DMX5710S Double DIN 6.8\" Digital Media Receiver","description":"\u003cp\u003eThe Kenwood DMX5710S is a Double DIN digital multimedia receiver designed to replace a factory radio with a modern 6.8-inch touchscreen interface. It brings smartphone navigation, calling, music, USB media playback, AM\/FM radio, and Bluetooth into one dashboard component. It is a practical fit for drivers who want current phone integration without adding a separate display.\u003c\/p\u003e\u003cp\u003eWireless and wired Apple CarPlay and Android Auto provide access to compatible phone apps through the receiver screen. The capacitive touch panel supports swipe-based control, while the WSVGA display uses a 1024 x 600 resolution for clear on-screen menus and compatible media. Built-in Bluetooth adds hands-free calling and wireless audio streaming.\u003c\/p\u003e\u003cp\u003eFor sound tuning, the DMX5710S includes a 13-band graphic equalizer, digital time alignment, high-pass and low-pass filtering, and a dedicated subwoofer output. Its built-in amplifier is rated at 22 watts x 4 full-bandwidth power at less than 1% THD, with 50 watts x 4 maximum power. These controls make it suitable for retaining factory speakers or serving as the source unit in a system with external amplification.\u003c\/p\u003e\u003cp\u003eThe receiver supports wireless smartphone mirroring through the MirrorAPP+ app on selected compatible phones. It is also iDatalink Maestro Ready, allowing compatible vehicles to retain selected factory functions when used with a separately sold Maestro RR or RR2 interface. A rear-view camera input with adjustable parking guidelines can support a compatible backup camera.\u003c\/p\u003e\u003cp\u003eA short 85.7 mm chassis depth helps when working in dashboards with limited space behind the radio opening. Two 2.5-volt preouts and a subwoofer output provide expansion options for aftermarket amplifiers. SiriusXM capability is available with a separately sold compatible tuner, while the USB port supports media playback and charging up to 2.1A.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Uses wired or wireless Apple CarPlay and Android Auto with compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.8-Inch Capacitive Display:\u003c\/strong\u003e Provides responsive swipe control on a 1024 x 600 WSVGA screen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Equalizer:\u003c\/strong\u003e Lets you tailor tonal balance for the vehicle and speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Time Alignment:\u003c\/strong\u003e Helps adjust sound staging for the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eiDatalink Maestro Ready:\u003c\/strong\u003e Supports compatible Maestro RR or RR2 interfaces sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort Chassis:\u003c\/strong\u003e Reduces mounting depth for easier fitment in many dashboards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX5710S combines a clear-glass capacitive touch panel with a TN LCD, TFT active-matrix drive system, RGB-striped pixel arrangement, and LED backlighting. Its 6.8-inch wide display has 1,843,200 total pixels and a 99.99% effective-pixel specification. The compact main chassis measures 178 x 100 x 85.7 mm and weighs 1.05 kg including the trim plate.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a Double DIN receiver and plan for the appropriate vehicle-specific dash kit, wiring interface, antenna adapter, and steering-wheel-control interface where applicable. The receiver operates from a 12V DC vehicle electrical system and supports 4- to 8-ohm speakers. Add a compatible rear camera, SiriusXM tuner, Maestro interface, or optional KCA-RCDV340 remote only if those functions are needed.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632954466374,"sku":"DMX5710S","price":460.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71QQbxuRJHL.jpg?v=1784403401"},{"product_id":"kenwood-dmx8709s-6-8-double-din-receiver-with-wireless-carplay","title":"Kenwood DMX8709S 6.8\" Double DIN Receiver with Wireless CarPlay","description":"\u003cp\u003eThe Kenwood DMX8709S is a double-DIN digital multimedia receiver designed to modernize an in-dash system with smartphone control, Bluetooth calling, AM\/FM radio, USB media playback, and camera connectivity. Its 6.75-inch WVGA capacitive touch display provides a responsive interface for daily driving functions. It is suited to drivers replacing an older factory radio or building a more connected aftermarket audio system.\u003c\/p\u003e\u003cp\u003eWired and wireless Apple CarPlay and Android Auto let compatible phones bring navigation, calling, messages, and supported music apps to the receiver display. Wireless operation helps keep the cabin uncluttered for routine trips, while USB remains available for wired phone connection and media playback. Android USB mirroring is also supported with select compatible Android devices.\u003c\/p\u003e\u003cp\u003eThe DMX8709S supplies 50 watts maximum power across four channels, with a rated full-bandwidth output of 22 watts by four channels at less than 1% THD. Three 4-volt preouts support adding external amplification for front, rear, and subwoofer channels. Its 13-band equalizer, digital time alignment, and adjustable crossover settings give an installer useful tools for tailoring speaker balance and system staging.\u003c\/p\u003e\u003cp\u003eA capacitive TN LCD panel with LED backlighting delivers 800 x 480 WVGA resolution and a 6.75-inch diagonal picture size. Built-in Wi-Fi supports wireless smartphone integration, while Bluetooth 5.0 supports hands-free calling, audio streaming, dual-phone connection, and Music Mix pairing for up to five devices. The receiver also includes a Type-D HDMI input, AV input, video output, and USB connectivity.\u003c\/p\u003e\u003cp\u003eFor a practical safety-oriented upgrade, the DMX8709S supports up to three camera inputs and adjustable rear-camera parking guidelines when a compatible backup camera is installed. Its 75 mm short chassis can make fitment easier in vehicles with limited dash depth. The unit can serve as a standalone factory-radio replacement or as the control center for a system with amplifiers, cameras, SiriusXM, and compatible vehicle-data integration hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired and wireless Apple CarPlay and Android Auto with compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacitive WVGA Display:\u003c\/strong\u003e The 6.75-inch touchscreen provides responsive control and LED backlighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 4-Volt Preouts:\u003c\/strong\u003e Connect external front, rear, and subwoofer amplifiers with strong signal output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band Sound Tuning:\u003c\/strong\u003e Equalizer, time alignment, and crossover controls help tailor system balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Camera Inputs:\u003c\/strong\u003e Accommodates front, rear, and additional camera configurations for expanded visibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0 Connectivity:\u003c\/strong\u003e Supports hands-free calling, music streaming, dual-phone use, and Music Mix pairing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX8709S uses a fixed 6.75-inch capacitive touchscreen with a TN LCD panel, TFT active-matrix drive system, RGB striped pixel arrangement, and LED backlighting. Its compact 75 mm chassis depth is intended to simplify installation where behind-dash space is limited. A trim plate and mounting sleeve are included with the main unit.\u003c\/p\u003e\u003cp\u003eConfirm double-DIN fitment and vehicle-specific wiring requirements before purchase. Professional installation is recommended for power, speaker, parking-brake, reverse, camera, steering-wheel-control, and amplifier connections. For wireless smartphone use, select the receiver's Wi-Fi setting; selecting HDMI mode disables wireless Apple CarPlay and wireless Android Auto until Wi-Fi mode is selected again.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632962854982,"sku":"DMX8709S","price":777.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FkUtI1n1L.jpg?v=1784403457"},{"product_id":"kenwood-dmx8710s-double-din-6-92-digital-media-receiver","title":"Kenwood DMX8710S Double DIN 6.92\" Digital Media Receiver","description":"\u003cp\u003eThe Kenwood DMX8710S is a Double DIN digital multimedia receiver designed to update compatible vehicles with a modern touchscreen interface, smartphone integration, and expanded audio control. Its 6.92-inch HD capacitive display brings navigation, calling, music, radio, and connected-device functions into one dash-mounted unit. It is a practical upgrade for drivers replacing an older factory radio or building a more capable aftermarket infotainment system.\u003c\/p\u003e\u003cp\u003eWireless and wired Apple CarPlay and Android Auto provide familiar access to supported phone functions through the receiver's display and voice controls. Built-in Wi-Fi supports the wireless smartphone connection features, while Bluetooth 5.3 supports hands-free calling and wireless audio. The receiver can also wirelessly mirror selected smartphones using the CarbitLink-EasyConnection app.\u003c\/p\u003e\u003cp\u003eThe DMX8710S is equipped for everyday listening as well as more detailed system tuning. A 13-band graphic EQ, digital time alignment, selectable crossover settings, and subwoofer level control help tailor the sound to the vehicle and speaker system. Its internal amplifier is rated for 50 watts maximum per channel and provides 22 watts per channel of typical output at 1 kHz with less than 10% THD.\u003c\/p\u003e\u003cp\u003eFor expansion, this receiver includes three 3-volt preouts for connection to external amplification and supports both 2-way and 3-way crossover configurations. USB playback supports common audio formats including MP3, WMA, AAC, WAV, and FLAC, plus several video file formats. An HDMI input also allows compatible external devices to be displayed on the screen.\u003c\/p\u003e\u003cp\u003eCamera and vehicle-integration features make the DMX8710S suitable for a wide range of custom installations. It has two camera inputs, adjustable parking guidelines, and HD rear-camera compatibility with Kenwood's optional CMOS-740HD camera. iDatalink Maestro RR or RR2 compatibility can retain supported factory controls, amplifiers, secondary displays, and vehicle-information functions when used with a compatible vehicle and required installation hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.92-Inch HD Touchscreen:\u003c\/strong\u003e Capacitive 1280 x 720 display provides a clear, responsive control surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired and wireless Apple CarPlay and Android Auto connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.3:\u003c\/strong\u003e Enables hands-free calling, audio streaming, and switching between two paired phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound-Tuning Tools:\u003c\/strong\u003e Includes 13-band EQ, time alignment, crossover controls, and subwoofer level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera Expandability:\u003c\/strong\u003e Two camera inputs support front and rear viewing with adjustable parking guidelines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Expansion:\u003c\/strong\u003e Three 3-volt preouts, HDMI input, SiriusXM readiness, and Maestro compatibility support upgrades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX8710S uses a standard 178 x 100 mm Double DIN chassis with a 6.92-inch LED-backlit AHVA LCD and electrostatic capacitive touch panel. Physical volume, Home, voice, and menu\/attenuation controls supplement touchscreen operation. The display uses a TFT active-matrix system with an RGB striped pixel arrangement.\u003c\/p\u003e\u003cp\u003eConfirm dash opening, chassis depth, vehicle-specific wiring, antenna connection, and retained factory-feature requirements before installation. Compatible iDatalink Maestro RR or RR2 modules and vehicle-specific accessories are required for supported factory integration features. An optional SiriusXM tuner, optional KCA-HD200 HDMI cable, optional KCA-RCDV340 remote, and compatible cameras are sold separately when those functions are desired.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632972030022,"sku":"DMX8710S","price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71e-2LKoJJL.jpg?v=1784403509"},{"product_id":"kenwood-dmx9708s-double-din-digital-media-receiver","title":"KENWOOD DMX9708S Double DIN Digital Media Receiver","description":"\u003cp\u003eThe KENWOOD DMX9708S is a Double DIN digital multimedia receiver designed to bring smartphone navigation, calling, music, and camera viewing to a factory-style dashboard location. Its 6.95-inch WVGA capacitive touchscreen provides a central interface for connected media and vehicle-focused functions. It is suited to drivers replacing an older radio or building a more integrated aftermarket audio system.\u003c\/p\u003e\u003cp\u003eWired and wireless Apple CarPlay and Android Auto let compatible phones handle common navigation, communication, and streaming tasks through the receiver display. Bluetooth adds hands-free calling and audio streaming, while KENWOOD Music Mix can connect up to five Bluetooth devices. Wireless Android mirroring is also available for select compatible Android devices.\u003c\/p\u003e\u003cp\u003eFor sound tuning, the DMX9708S combines a 13-band graphic EQ, digital time alignment, crossover controls, and Drive EQ. Its internal amplifier is rated at 22 watts RMS per channel across four channels at less than 1% THD, with 50 watts per channel maximum output. Three 4-volt preouts support expansion with external amplifiers for speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eUSB playback supports common audio and video formats, including high-resolution FLAC and WAV files up to 192 kHz\/24-bit. The USB Type-C connection supports USB 2.0 High Speed operation and can supply up to 3.0 amps at 5 volts. An HDMI Type-D input provides another connection option for compatible external video devices.\u003c\/p\u003e\u003cp\u003eThe receiver supports four camera inputs for flexible front, rear, side, and compatible dash-camera configurations. Adjustable parking guidelines can be used with a compatible rear camera, and iDatalink Maestro RR or RR2 integration is supported on compatible vehicles. Its 85 mm-deep chassis helps accommodate installations where dashboard space behind the radio is limited.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.95-Inch Capacitive Display:\u003c\/strong\u003e WVGA touchscreen with LED backlighting and swipe-based control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Smartphone Integration:\u003c\/strong\u003e Supports wired and wireless Apple CarPlay and Android Auto with compatible phones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Resolution USB Audio:\u003c\/strong\u003e Plays FLAC and WAV files at up to 192 kHz\/24-bit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band DSP Tuning:\u003c\/strong\u003e EQ, time alignment, crossover settings, and subwoofer level adjustment help tailor the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Camera Inputs:\u003c\/strong\u003e Connect compatible front, rear, side, and dash cameras in supported configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Volt Preouts:\u003c\/strong\u003e Three preouts provide a clean signal path for external amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DMX9708S uses a clear-glass capacitive touch panel over a 6.95-inch TN LCD with a TFT active-matrix drive system and LED backlighting. Its display resolution is 800 x 480 with 1,152,000 total pixels in RGB arrangement. The short 85 mm chassis depth is intended to provide added installation flexibility behind the dashboard.\u003c\/p\u003e\u003cp\u003eConfirm vehicle fitment before purchase, including dash opening, mounting hardware, wiring harness, antenna connection, and retention interfaces required for the specific vehicle. The main chassis measures 178 x 100 x 85 mm, and vehicle-specific adapters may be needed to retain factory steering-wheel controls, amplifier functions, or vehicle-data displays. A USB Type-C cable and USB Type-A adapter are included; cameras, SiriusXM hardware, HDMI cable, remote control, and Maestro interfaces are optional accessories.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632980254790,"sku":"DMX9708S","price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Nxw95my5L.jpg?v=1784403557"},{"product_id":"kenwood-dnr476s-6-8-double-din-navigation-receiver","title":"Kenwood DNR476S 6.8\" Double-DIN Navigation Receiver","description":"\u003cp\u003eThe Kenwood DNR476S is a double-DIN digital multimedia receiver with built-in Garmin GPS navigation, a 6.8-inch touchscreen, and smartphone integration. It replaces a factory radio with a centralized interface for navigation, calls, music, compatible cameras, and vehicle audio controls. It is designed for drivers who want dedicated onboard navigation alongside Apple CarPlay and Android Auto capability.\u003c\/p\u003e\u003cp\u003eIts built-in four-channel amplifier provides 22 watts RMS per channel, while three 4-volt preamp outputs support expansion with external amplifiers. A 13-band graphic equalizer, digital time alignment, and adjustable high- and low-pass crossovers help tailor the system to the vehicle and speaker setup. High-resolution WAV and FLAC playback support makes it a practical foundation for a sound-focused upgrade.\u003c\/p\u003e\u003cp\u003eGarmin navigation gives the DNR476S a standalone route-guidance option that does not rely solely on a phone projection interface. Lane Assist helps guide drivers toward the appropriate lane for upcoming turns and exits. The receiver also supports INRIX traffic and weather functions when used with the required compatible smartphone app and connection.\u003c\/p\u003e\u003cp\u003eThe clear resistive touchscreen uses an LED-backlit TN LCD panel with an 800 x 480 RGB display resolution. Its customizable multi-widget home screen can present useful information such as navigation prompts, clock, weather, album art, and more. Built-in Bluetooth supports hands-free calling, wireless audio streaming, music browsing, and switching between two connected phones.\u003c\/p\u003e\u003cp\u003eFor a more complete vehicle upgrade, the DNR476S offers three camera inputs, adjustable parking guidelines, SiriusXM readiness, iDatalink Maestro RR compatibility, and Kenwood DRV-N520 dash camera compatibility. The three 4-volt preouts allow the receiver to feed external amplifiers for upgraded speakers and subwoofers. As a digital multimedia receiver, it does not play CDs or DVDs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Garmin Navigation:\u003c\/strong\u003e Provides onboard GPS guidance with Lane Assist for approaching turns and exits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApple CarPlay And Android Auto:\u003c\/strong\u003e Brings compatible smartphone navigation, calling, messaging, and media apps to the touchscreen.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Camera Inputs:\u003c\/strong\u003e Accommodates compatible front, rear, and additional camera configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0:\u003c\/strong\u003e Supports hands-free calling, music streaming, music browsing, and dual-phone switching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ And Time Alignment:\u003c\/strong\u003e Provides useful tuning tools for better tonal balance and speaker staging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 4V Preouts:\u003c\/strong\u003e Supports external amplifiers for expanded speaker and subwoofer systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DNR476S uses a fixed double-DIN chassis with a 6.75-inch diagonal, LED-backlit TN LCD touchscreen. Its clear resistive touch panel is designed to reduce glare while providing direct on-screen control. Physical controls and a configurable multi-widget display complement the touchscreen interface.\u003c\/p\u003e\u003cp\u003eInstallation requires a compatible double-DIN dash opening, vehicle-specific mounting hardware as needed, and proper power, speaker, antenna, and parking-brake connections. A wiring harness and installation accessories are included, but vehicle-specific interface modules, cameras, SiriusXM tuner hardware, external amplifiers, and iDatalink Maestro components are optional. Use the rear USB connection for compatible media devices and smartphone integration, and have a qualified installer confirm vehicle and steering-wheel-control compatibility.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45632990478406,"sku":"DNR476S","price":1061.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71rXtYAq_0L.jpg?v=1784403609"},{"product_id":"kenwood-dpx305mbt-double-din-digital-media-receiver","title":"Kenwood DPX305MBT Double DIN Digital Media Receiver","description":"\u003cp\u003eThe Kenwood DPX305MBT is a Double DIN digital media receiver for drivers who want modern phone connectivity and AM\/FM listening without a CD mechanism. Its compact 100 mm chassis depth can help make installation more practical in vehicles with limited dash clearance. The receiver uses a 420-segment, three-line text display for source, track, and menu information. It is designed for playback from Bluetooth devices, USB media, and the front auxiliary input.\u003c\/p\u003e\u003cp\u003eBluetooth 4.2 supports hands-free calling and wireless music streaming, allowing the receiver to serve as a straightforward daily-use upgrade from an older factory radio. A dedicated Bluetooth access button provides quick entry to Bluetooth functions. Kenwood Music Mix allows up to five Bluetooth devices to be paired, which is useful when multiple people share the vehicle. Dual Phone Connection lets the user switch between two connected phones.\u003c\/p\u003e\u003cp\u003eFor sound tuning, the DPX305MBT combines a built-in four-channel amplifier with a 13-band equalizer and Digital Time Alignment. The internal amplifier is rated at 22 watts x 4 channels full bandwidth at less than 1% THD, with 50 watts x 4 channels maximum output. Drive EQ is included to adjust selected frequencies in response to road-noise effects. Three 2.5-volt preouts provide a path to external amplification or a powered subwoofer.\u003c\/p\u003e\u003cp\u003eThe front USB port supports common audio libraries and USB storage formatted in FAT12, FAT16, or FAT32. It plays MP3, WMA, AAC, WAV, and FLAC audio files, including FLAC files up to 24-bit\/96 kHz. The USB port supplies up to 1.5A at 5V for compatible devices. A front-panel auxiliary input provides an additional wired source option.\u003c\/p\u003e\u003cp\u003eThe receiver is Amazon Alexa ready for compatible voice-control use and is SiriusXM Radio ready when paired with the required optional tuner and service. Its three-zone variable-color illumination can be adjusted to coordinate with a vehicle's dashboard lighting. English, Spanish, and French display-menu options are available. This is a practical choice for a conventional Double DIN audio upgrade where physical controls, Bluetooth, USB playback, and system expansion matter more than a touchscreen interface.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Supports hands-free calls and wireless audio streaming from compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKenwood Music Mix:\u003c\/strong\u003e Pairs up to five Bluetooth devices for shared music access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ and DTA:\u003c\/strong\u003e Provides detailed tonal adjustment and speaker time alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 2.5V Preouts:\u003c\/strong\u003e Supports connection to external amplifiers or a powered subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront USB and AUX:\u003c\/strong\u003e Adds convenient access for wired devices and stored music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Color Illumination:\u003c\/strong\u003e Adjusts front-panel lighting across three separate color zones.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DPX305MBT has a black Double DIN chassis with a physical volume knob, front USB input, front auxiliary input, and a text-based display rather than a touchscreen. Its 420-segment, three-line display is paired with configurable front-panel illumination. The short 100 mm chassis depth is intended to make room behind the dash for wiring and vehicle-specific installation hardware.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a Double DIN receiver before purchase, and use the appropriate vehicle-specific dash kit, wiring harness, and antenna adapter where required. The receiver operates from a 12V DC negative-ground vehicle electrical system and uses a 10A fuse. A supplied microphone connects at the rear for Bluetooth calling; professional installation is recommended for safe wiring, steering-wheel-control integration, and proper system setup.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633048412230,"sku":"DPX305MBT","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71v9kLTP-WL.jpg?v=1784403944"},{"product_id":"kenwood-dpx505bt-double-din-cd-receiver-with-bluetooth","title":"Kenwood DPX505BT Double DIN CD Receiver with Bluetooth","description":"\u003cp\u003eThe Kenwood DPX505BT is a double-DIN in-dash CD receiver for drivers who want modern phone connectivity while retaining a conventional physical-control radio and disc player. It combines AM\/FM reception, Bluetooth calling and music streaming, front USB and AUX inputs, and a single-disc CD mechanism in one chassis. This makes it a practical replacement for an older factory radio without requiring a touchscreen interface.\u003c\/p\u003e\u003cp\u003eIt is suited to vehicles with a double-DIN radio opening and owners who use a mix of broadcast radio, CDs, USB music, and smartphone audio. Bluetooth supports hands-free calling as well as wireless playback, while the receiver can pair with multiple devices and switch between two connected phones. A front-panel Bluetooth access button helps keep common phone functions within reach.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated at 22 watts RMS per channel across four channels at less than 1% THD, with 50 watts maximum output per channel. A 13-band equalizer, digital time alignment, speaker-size settings, and adjustable crossover controls provide useful tuning tools for factory-speaker upgrades or more detailed aftermarket systems. Drive EQ is also available to compensate for road and tire noise.\u003c\/p\u003e\u003cp\u003eFor voice-enabled use, the DPX505BT works with the Amazon Alexa mobile app through a compatible Bluetooth-connected phone. Alexa can be activated with the receiver control or the wake word when connected and configured. The receiver also works with the KENWOOD Remote application for basic smartphone-based control.\u003c\/p\u003e\u003cp\u003eThe receiver provides three 2.5-volt RCA preouts for front, rear, and subwoofer channels, allowing it to serve as the control center for an expanded amplifier and powered-subwoofer system. Its front USB port supports compatible iPhone, iPod, flash-drive, and mass-storage connections, while Bluetooth supports iPhone and Android audio playback. SiriusXM capability is available when an optional compatible SiriusXM vehicle tuner is added.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Supports hands-free calling, phonebook access, and wireless audio streaming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmazon Alexa Ready:\u003c\/strong\u003e Enables Alexa voice functions through a configured smartphone connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ and DTA:\u003c\/strong\u003e Provides detailed sound tuning and speaker time-alignment adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD and USB Playback:\u003c\/strong\u003e Plays audio CDs and supported digital music files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 2.5V Preouts:\u003c\/strong\u003e Connects front, rear, and subwoofer amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Zone Color Illumination:\u003c\/strong\u003e Lets the display and key zones match dashboard lighting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DPX505BT uses a conventional double-DIN chassis and a physical-control faceplate with a 420-segment, 3-line text display. Kenwood does not publish faceplate material details, but the layout includes dedicated source, Bluetooth, and Alexa controls along with variable illumination for the LCD display and two key zones. Display text can be set to English, Spanish, or French.\u003c\/p\u003e\u003cp\u003eInstallation requires a double-DIN-compatible dashboard opening, vehicle-specific mounting hardware as needed, and proper power, speaker, ground, and antenna connections. The included wiring harness and supplied mounting screws support installation, while a vehicle-specific aftermarket harness is recommended to avoid cutting factory wiring. Use the front USB and AUX inputs for accessible portable-device connections, and use the RCA preouts when adding external amplification or a subwoofer.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633056014406,"sku":"DPX505BT","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71jqTUJaArL.jpg?v=1784403995"},{"product_id":"kenwood-drv-a310w-full-hd-gps-dash-camera","title":"Kenwood DRV-A310W Full HD GPS Dash Camera","description":"\u003cp\u003eThe Kenwood DRV-A310W is a compact front-facing dash camera designed to create a clear video record of daily drives and road incidents. It records in Full HD and includes built-in GPS and a G-sensor to add useful driving context to recorded files. Its small footprint and windshield-mounted format make it suited to drivers who want documentation without adding a large screen or receiver to the dashboard.\u003c\/p\u003e\u003cp\u003eA 2.0-megapixel Galaxy Core GC2093 image sensor records 1920 x 1080 video at 30 frames per second. HDR and WDR processing help the camera manage bright backlighting and darker areas within the same scene. The F1.8 lens provides a 136-degree diagonal field of view for broad forward-road coverage.\u003c\/p\u003e\u003cp\u003eThe DRV-A310W automatically starts and stops recording with the vehicle, while loop recording replaces the oldest unprotected files when card capacity is reached. Its built-in G-sensor can detect an impact and protect the related recording from ordinary overwrite. GPS information can record speed, latitude, and longitude alongside video data.\u003c\/p\u003e\u003cp\u003eWireless Link connectivity works with the Kenwood Dash Cam Manager app for live preview, camera control, video review, downloads, settings adjustments, and supported over-the-air firmware updates. The camera also has a 2-inch color TFT display, built-in microphone, and built-in speaker for direct operation and playback. For desktop viewing, recorded files can be accessed with Kenwood Video Player on compatible Windows and macOS computers.\u003c\/p\u003e\u003cp\u003eThe DRV-A310W can serve as a straightforward front camera or become part of a two-channel recording setup with the optional Kenwood KCA-R110 Full HD rear camera. An optional CA-DR1130 hardwire kit enables parking-mode and motion-detection recording when the vehicle is off. This upgrade path allows owners to add rear coverage and parked-vehicle monitoring without replacing the front camera.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull HD Recording:\u003c\/strong\u003e Captures 1920 x 1080 video at 30 fps for detailed forward-facing footage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR And WDR:\u003c\/strong\u003e Helps balance bright and dark areas for clearer recordings in changing light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In GPS And G-Sensor:\u003c\/strong\u003e Adds location and speed data while protecting files associated with detected impacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Link App Control:\u003c\/strong\u003e Supports live view, file downloads, settings control, and firmware updates through the Kenwood app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Rear Camera Support:\u003c\/strong\u003e Works with the KCA-R110 for simultaneous Full HD front and rear recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardwire-Enabled Parking Monitoring:\u003c\/strong\u003e Supports impact and motion-triggered parking recording with the optional CA-DR1130 kit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DRV-A310W uses a compact dash-camera body with a 2-inch full-color TFT display, tactile controls, built-in microphone, and built-in speaker. A supercapacitor provides enough reserve power to close a video file properly if vehicle power is lost. The camera measures 2.3 x 1.68 x 0.96 inches with its bracket attached and weighs 65 grams.\u003c\/p\u003e\u003cp\u003eInstall the camera on the windshield using the supplied adhesive mount, then power it with the included 13.1-foot car power cable and USB Type-A car charger. A microSDXC or microSDHC card from 8GB to 256GB is required and should be formatted in the camera before first use. Add the optional KCA-R110 for rear recording, or install the optional CA-DR1130 hardwire kit when parking-mode or motion-detection recording is needed.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633056211014,"sku":"DRV-A310W","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51ZdENBs1mL.jpg?v=1784404042"},{"product_id":"kenwood-drv-a510wdp-front-rear-gps-dash-cam","title":"KENWOOD DRV-A510WDP Front \u0026 Rear GPS Dash Cam","description":"\u003cp\u003eThe KENWOOD DRV-A510WDP is a dual-channel dash camera system designed to document the road ahead and behind your vehicle. Its front camera records in Quad HD while the included rear camera records in Full HD, giving drivers coverage for daily commuting, work vehicles, trucks, and RVs. Built-in GPS and a G-sensor add location, speed, and event data to recorded footage.\u003c\/p\u003e\u003cp\u003eThis system is suited to drivers who want continuous recording without regularly managing files. Loop recording automatically replaces older clips when the compatible microSD card is full, while collision detection helps protect recordings associated with sudden impacts. The front camera also includes a 2-inch full-color TFT display for local viewing and setup.\u003c\/p\u003e\u003cp\u003eRecording performance centers on a Sony STARVIS IMX335 front sensor, a 2560 x 1440 front recording resolution, and a 1920 x 1080 rear recording resolution. The front lens uses WDR, while HDR support helps manage scenes with bright highlights and darker areas. This combination is intended to maintain useful road detail across changing daylight conditions.\u003c\/p\u003e\u003cp\u003eWireless Link lets the DRV-A510WDP work with the KENWOOD DASH CAM MANAGER app for live viewing, settings adjustment, file review, and firmware updates through a compatible smartphone. Bluetooth is used during app connection, while the wireless link supports access to the camera from a short distance. KENWOOD VIDEO PLAYER software is also available for reviewing recorded footage on compatible Windows and Mac computers.\u003c\/p\u003e\u003cp\u003eThe included rear camera is IP67 rated for dust and water resistance and connects to the front camera with a 26-foot cable. That reach supports rear-window, exterior, cargo-area, or trailer-adjacent camera placement where appropriate. For expanded parked-vehicle monitoring, the optional KENWOOD CA-DR1130 hardwire kit enables parking-mode and motion-detection recording.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Camera Coverage:\u003c\/strong\u003e Records the front and rear of the vehicle at the same time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuad HD Front Recording:\u003c\/strong\u003e The front camera captures 2560 x 1440 video at 30 fps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull HD Rear Recording:\u003c\/strong\u003e The included rear camera captures 1920 x 1080 video at 30 fps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS And G-Sensor:\u003c\/strong\u003e Adds drive data and helps save recordings from detected impacts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless App Access:\u003c\/strong\u003e Use the KENWOOD DASH CAM MANAGER app for viewing and setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Rear Camera:\u003c\/strong\u003e The rear camera is built for dust and water resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DRV-A510WDP uses a compact front-camera body with a 2-inch full-color TFT screen, built-in microphone, speaker, GPS receiver, G-sensor, and supercapacitor. Its rear camera has an IP67-rated enclosure and an adjustable mounting arrangement for positioning the recording view. The supercapacitor provides reserve power to help properly close a recording file if vehicle power is interrupted.\u003c\/p\u003e\u003cp\u003eInstall the front camera near the windshield using the supplied adhesive mount and connect it to vehicle power with the included car power cable and USB car charger. Route the rear-camera cable carefully along trim panels, avoiding airbag paths, then mount the rear camera at the rear windshield or another suitable location. A compatible Class 10 microSDXC or microSDHC card is required for recording, and the optional CA-DR1130 hardwire kit is required for parking-mode and motion-detection recording.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633056407622,"sku":"DRV-A510WDP","price":250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61fzysOiT2L.jpg?v=1784404096"},{"product_id":"kenwood-drv-a610wdp-4k-front-and-2k-rear-dash-cam","title":"Kenwood DRV-A610WDP 4K Front And 2K Rear Dash Cam","description":"\u003cp\u003eThe Kenwood DRV-A610WDP is a two-camera dash cam system designed to document the road ahead and behind your vehicle. It combines a 4K front camera with a Quad HD rear camera for continuous dual-channel recording. This package is suited to drivers who want recorded evidence for daily commuting, road trips, work vehicles, trucks, or RVs.\u003c\/p\u003e\u003cp\u003eThe front camera uses an 8.3-megapixel Sony STARVIS IMX415 image sensor and records at 3840 x 2160 resolution. Its wide dynamic range processing is intended to maintain detail across bright and dark portions of a scene. The rear camera records at 2560 x 1440 and uses HDR processing to help handle changing lighting conditions.\u003c\/p\u003e\u003cp\u003eBuilt-in GPS, a G-sensor, and optional audio recording add useful context to recorded files. When an impact is detected, the G-sensor can identify and preserve the associated recording. GPS information can be reviewed with compatible playback software and the KENWOOD DASH CAM MANAGER app.\u003c\/p\u003e\u003cp\u003eWireless Link provides access to live-view functions, recorded clips, settings, and firmware updates through a compatible smartphone. The included 64GB microSD card lets the system begin recording without requiring a separate card purchase. Loop recording continuously replaces older unprotected footage as storage fills.\u003c\/p\u003e\u003cp\u003eThe DRV-A610WDP is built around a compact front camera with a 2-inch color TFT display and a weather-resistant IP67 rear camera. A 26-foot rear-camera cable supports installation in cars, trucks, and RVs, including rear-window or exterior mounting positions. For expanded parked-vehicle recording functions, the optional Kenwood CA-DR1130 hardwire kit is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Camera Coverage:\u003c\/strong\u003e Records front and rear views simultaneously for broader vehicle coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4K Front Recording:\u003c\/strong\u003e Captures front video at 3840 x 2160 resolution and 30 fps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuad HD Rear Recording:\u003c\/strong\u003e Captures rear video at 2560 x 1440 resolution and 30 fps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPS And G-Sensor:\u003c\/strong\u003e Adds driving-location data and detects impact events for file protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Link App Access:\u003c\/strong\u003e Supports live preview, clip review, settings, and wireless firmware updates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Rear Camera:\u003c\/strong\u003e Enables protected rear-camera mounting inside or outside the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe front camera uses a compact chassis with a 2-inch full-color TFT display, built-in microphone, built-in speaker, GPS receiver, G-sensor, and supercapacitor. The supercapacitor provides enough reserve power to close a recording file properly if vehicle power is lost. The rear camera carries an IP67 dust- and water-resistance rating and includes an adjustable mounting arrangement.\u003c\/p\u003e\u003cp\u003eMount the front camera where it has an unobstructed forward view while avoiding interference with the driver's view. Route the included 26-foot power-and-video cable to the rear camera, which may be mounted at the rear windshield or in an exterior location. The supplied vehicle power connection supports 12V and 24V applications; install the optional CA-DR1130 hardwire kit when Parking Mode Recording or Motion Detection Recording is desired.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633056604230,"sku":"DRV-A610WDP","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TLV1sRGCL.jpg?v=1784404138"},{"product_id":"kenwood-kac-9106d-2000w-class-d-mono-car-amplifier","title":"Kenwood KAC-9106D 2000W Class D Mono Car Amplifier","description":"\u003cp\u003eThe Kenwood KAC-9106D is a mono Class D power amplifier designed to add dedicated subwoofer amplification to a vehicle audio system. It provides a rated 500 watts RMS at 4 ohms or 1,000 watts RMS at 2 ohms, giving compatible subwoofers the power needed for stronger low-frequency output. Its single-channel layout is intended for a subwoofer system rather than full-range speakers.\u003c\/p\u003e\u003cp\u003eThis amplifier is a practical choice for listeners upgrading a factory or aftermarket stereo with a powered bass section. RCA line inputs support aftermarket receivers with preamp outputs, while the speaker-level input supports connection to systems without RCA outputs. Signal-sensing turn-on can simplify integration when using a speaker-level signal.\u003c\/p\u003e\u003cp\u003eThe KAC-9106D is engineered around a Class D amplifier platform and a MOS-FET switching power supply. Its adjustable low-pass filter helps limit output to bass frequencies, while the variable infrasonic filter can reduce reproduction below a selected frequency. A variable 40 Hz bass boost control allows additional adjustment of low-bass emphasis.\u003c\/p\u003e\u003cp\u003eFor system matching, the amplifier supports speaker loads from 2 to 8 ohms. A 2-ohm final subwoofer load allows the amplifier to deliver its 1,000-watt RMS rating, while a 4-ohm load is rated for 500 watts RMS. Careful subwoofer wiring and power handling matching are important before installation.\u003c\/p\u003e\u003cp\u003eThe compact chassis measures just over 13 inches wide and uses a cast aluminum heat-sink design for heat dissipation. Nickel-plated screw terminals provide dedicated battery, ground, and speaker connections, and RCA line output terminals can pass signal to an additional amplifier. It is a focused bass-amplifier upgrade for systems needing controlled subwoofer power and flexible input options.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Design:\u003c\/strong\u003e Delivers dedicated power for a compatible subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS at 2 Ohms:\u003c\/strong\u003e Supports higher-output bass systems with a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the upper bass cutoff from 50 to 200 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Infrasonic Filter:\u003c\/strong\u003e Filters frequencies from 20 to 50 Hz below the selected point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Allows connection to systems without RCA preamp outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sensing Turn-On:\u003c\/strong\u003e Can activate the amplifier from a speaker-level signal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-9106D uses a cast aluminum heat sink and a compact Class D chassis measuring 13-3\/16 inches wide, 2-3\/16 inches high, and 7-9\/16 inches deep. It includes nickel-plated screw-type terminal blocks for battery, ground, and speaker connections, plus a terminal cover. The amplifier is rated for operation from 11 to 16 volts, with a nominal 14.4-volt vehicle electrical system.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a secure location with ventilation and route power, ground, signal, and speaker wiring safely away from moving parts and heat sources. Use either the RCA input or the speaker-level input according to the source unit, then set input sensitivity and filters for the connected subwoofer system. The amplifier accepts a 2- to 8-ohm speaker load; do not wire a final load below 2 ohms.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633056768070,"sku":"KAC-9106D","price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81CTuBDlTlL.jpg?v=1784404175"},{"product_id":"kenwood-kac-d3104-4-channel-class-d-power-amplifier","title":"Kenwood KAC-D3104 4-Channel Class D Power Amplifier","description":"\u003cp\u003eThe Kenwood KAC-D3104 is a compact four-channel Class D car audio power amplifier designed to add dedicated amplification to a vehicle sound system. It provides 50 watts RMS to each of four channels at 4 ohms, making it suited to powering upgraded front and rear speakers. Its compact chassis helps address installations where space behind panels, beneath seats, or in a trunk is limited.\u003c\/p\u003e\u003cp\u003eThis amplifier is a practical choice for listeners who want clearer, more controlled output than a typical factory head unit can provide. It supports both RCA line-level input and speaker-level input, allowing it to work with a variety of aftermarket or factory-source systems. Signal-sensing turn-on support can simplify integration when using a speaker-level source.\u003c\/p\u003e\u003cp\u003eThe KAC-D3104 uses Class D amplification and a Power MOS-FET switching power supply in a compact format. Its frequency response extends from 20 Hz to 50 kHz, supporting full-range speaker systems and high-resolution audio playback. Kenwood's Dual Sigma Drive negative-feedback circuit is designed to improve damping and signal accuracy.\u003c\/p\u003e\u003cp\u003eEach A\/B channel pair has selectable variable high-pass or low-pass filtering from 50 Hz to 200 Hz. This flexibility lets the amplifier run full-range speakers with high-pass filtering or support a filtered speaker\/subwoofer configuration when the system design calls for it. Bass boost is available on the B-channel section at 40 Hz, adjustable from 0 dB to +18 dB.\u003c\/p\u003e\u003cp\u003eFor larger system plans, the KAC-D3104 can also be bridged to deliver 150 watts RMS to each of two 4-ohm channels. That makes it adaptable for a two-channel higher-power speaker setup, while its standard four-channel mode is appropriate for front-and-rear speaker upgrades. Proper impedance matching, power wiring, grounding, and gain setup remain important for reliable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers four speakers from a compact amplifier chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS x 4 at 4 Ohms:\u003c\/strong\u003e Delivers dedicated power for full-range speaker upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Load Capability:\u003c\/strong\u003e Produces 75W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channels:\u003c\/strong\u003e Configures as two 150W RMS channels at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable HPF and LPF:\u003c\/strong\u003e Helps match output to speaker system needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Supports integration with systems lacking RCA outputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-D3104 uses an extruded aluminum heat-sink design and a compact 6-11\/16 by 2-3\/16 by 7-3\/8 inch chassis. Its terminal layout includes M6 screw-type battery and ground terminals plus M4 screw-type speaker output terminals. The design combines four channels of Class D amplification with separate A- and B-channel filter and sensitivity controls.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a dry, ventilated location with secure mounting and appropriate power, ground, remote-turn-on, signal, and speaker wiring. Use four-channel mode for separate front and rear speakers, or bridge paired channels only with a 4- to 8-ohm bridged load. Set input sensitivity and crossover controls after matching the amplifier to the source unit and connected speakers.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633056866374,"sku":"KAC-D3104","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51CSwUyqMrL.jpg?v=1784404232"},{"product_id":"kenwood-kac-d5101-class-d-mono-car-amplifier","title":"Kenwood KAC-D5101 Class D Mono Car Amplifier","description":"\u003cp\u003eThe Kenwood KAC-D5101 is a compact Class D mono amplifier designed to add dedicated subwoofer power to a vehicle audio system. It delivers 300 watts RMS to a 4-ohm load or 500 watts RMS to a 2-ohm load, giving installers practical options for matching a compatible subwoofer configuration. Its mono-channel design focuses on low-frequency reinforcement rather than full-range speaker amplification.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to drivers who want stronger bass from an aftermarket subwoofer while keeping the installation footprint manageable. The compact chassis measures 6-11\/16 inches wide, 2-3\/16 inches high, and 7-3\/8 inches deep. That size can be useful for under-seat, cargo-area, or concealed amplifier locations where mounting space is limited.\u003c\/p\u003e\u003cp\u003eThe KAC-D5101 uses a variable low-pass filter to direct bass frequencies to the connected subwoofer. Its adjustable bass boost operates at 40 Hz, allowing measured low-frequency adjustment when system tuning calls for it. A 20 Hz to 200 Hz frequency response supports its role as a dedicated bass amplifier.\u003c\/p\u003e\u003cp\u003eKenwood's Dual Sigma Drive negative-feedback circuit is designed to improve damping factor and help control unwanted subwoofer movement. The amplifier also uses a Power MOS-FET switching power supply for its Class D platform. Together, these design elements support controlled low-frequency operation in a compact mono amplifier.\u003c\/p\u003e\u003cp\u003eInstallation flexibility includes RCA line-level input and speaker-level input capability. Signal sensing turn-on can help the amplifier work with systems that do not provide a conventional remote-turn-on lead. With support for 2-ohm through 8-ohm speaker loads, it can be integrated into a range of properly wired subwoofer systems.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Design:\u003c\/strong\u003e Dedicated single-channel amplification for a subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS at 2 Ohms:\u003c\/strong\u003e Supplies substantial continuous power to compatible 2-ohm loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the bass frequency range sent to the subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 Hz Bass Boost:\u003c\/strong\u003e Provides adjustable low-frequency boost from 0 to +18 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Supports connection to compatible factory-radio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Sensing Turn-On:\u003c\/strong\u003e Can switch on when it detects an input signal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-D5101 uses an extruded aluminum heat-sink design and a compact rectangular chassis. Its battery and ground connections use M6 screw-type terminal blocks, while the speaker output uses an M4 screw-type terminal block. Two 30-amp fuses are fitted for circuit protection.\u003c\/p\u003e\u003cp\u003eFor installation, mount the amplifier securely in a ventilated location and use a properly fused 12-volt vehicle power connection. Connect a subwoofer system with a final impedance between 2 and 8 ohms, then set input sensitivity, low-pass filter frequency, and bass boost to suit the source unit and subwoofer. RCA input is available for aftermarket source units, while speaker-level input and signal sensing are useful for compatible factory-system upgrades.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633058046022,"sku":"KAC-D5101","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/6197v7SI25L.jpg?v=1784404271"},{"product_id":"kenwood-kac-d8105-5-channel-class-d-car-amplifier","title":"Kenwood KAC-D8105 5-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Kenwood KAC-D8105 is a five-channel Class D car amplifier designed to run four full-range speakers and a dedicated subwoofer from one compact chassis. It provides a practical upgrade path for vehicles where factory amplification is limited or where separate amplifiers would take up too much space. With dedicated A\/B and subwoofer channel sections, it supports a complete speaker-and-subwoofer system from a single amplifier.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the KAC-D8105 is rated for 50 watts RMS across each of four A\/B channels plus 300 watts RMS for the subwoofer channel. At 2 ohms, its ratings increase to 75 watts RMS x 4 and 500 watts RMS x 1. This makes it suitable for systems that need clean power for front and rear speakers while retaining a separate low-frequency channel for a compatible subwoofer.\u003c\/p\u003e\u003cp\u003eThe A\/B channels have a 20 Hz to 50 kHz frequency response, while the subwoofer channel is specified from 20 Hz to 200 Hz. Variable high-pass and low-pass filters help divide frequencies between speakers and subwoofer for a more purposeful system setup. A variable subwoofer bass boost control is also provided for low-frequency adjustment at 40 Hz.\u003c\/p\u003e\u003cp\u003eKenwood equips the KAC-D8105 with Dual Sigma Drive negative-feedback technology, which is intended to improve damping and control speaker movement. Its Power MOS-FET switching power supply supports the amplifier's efficient Class D design. Independent gain adjustment for the A\/B and subwoofer sections allows installers to set levels for the full-range and bass portions of the system separately.\u003c\/p\u003e\u003cp\u003eThe amplifier accepts both RCA and speaker-level input signals, making it useful with aftermarket receivers as well as many factory-radio installations. Signal-sensing turn-on can activate the amplifier from a speaker-level input signal when applicable. Its compact 9-inch-wide chassis is designed for installations where space is limited, including many under-seat or trunk locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Configuration:\u003c\/strong\u003e Powers four speakers plus one dedicated subwoofer channel from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1600W Maximum Power:\u003c\/strong\u003e Provides the manufacturer's stated maximum-power rating for the complete amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Load Capability:\u003c\/strong\u003e Supports rated operation with compatible 2-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters help direct frequencies to appropriate speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Supports connection to compatible factory-radio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sensing Turn-On:\u003c\/strong\u003e Can detect an incoming speaker-level signal for activation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-D8105 uses an extruded aluminum heat-sink design and a compact Class D layout. Its power and ground connections use M6 screw-type terminal blocks, while the speaker outputs use M4 screw-type terminal blocks. The chassis measures 9 inches wide by 2-3\/16 inches high by 7-3\/8 inches deep and weighs 4.5 pounds.\u003c\/p\u003e\u003cp\u003ePlan the installation around the amplifier's dimensions, ventilation needs, and the vehicle's 11 to 16 volt operating range. Connect a source through RCA line inputs or the speaker-level input, then set the A\/B high-pass and subwoofer low-pass controls to suit the speakers and subwoofer being used. Match loads carefully: the bridged A\/B outputs require a 4- to 8-ohm load, while the amplifier is rated for 2- to 8-ohm allowable speaker loads.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633058144326,"sku":"KAC-D8105","price":477.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61oFKOmDAVL.jpg?v=1784404319"},{"product_id":"kenwood-kac-m1814-compact-4-channel-marine-digital-amplifier","title":"Kenwood KAC-M1814 Compact 4-Channel Marine Digital Amplifier","description":"\u003cp\u003eThe Kenwood KAC-M1814 is a compact four-channel Class D amplifier designed to add clean, controlled power to car, marine, and motorsports audio systems. It is a practical solution for systems that need more output than a receiver's built-in amplifier can provide while conserving installation space. Its small footprint makes it suitable for locations where a conventional full-size amplifier may be difficult to mount.\u003c\/p\u003e\u003cp\u003eWith 45 watts RMS per channel, the KAC-M1814 can power four compatible speakers or be configured in bridged two-channel operation. It supports 2-ohm stereo loads and 4- to 8-ohm bridged loads, allowing it to work with a range of speaker layouts. Variable high-pass and low-pass filters help tailor the signal for full-range speakers or selected system configurations.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building a compact upgrade in a vehicle, boat, or powersports application. Speaker-level input with signal-sensing turn-on supports integration with receivers that do not provide dedicated RCA preamp outputs. RCA inputs are also available for use with aftermarket receivers and other line-level sources.\u003c\/p\u003e\u003cp\u003eKenwood uses a Class D digital amplifier platform with a Power MOS-FET switching power supply to keep the chassis compact. Separate preamp and power-amp sections are designed to help reduce radiation noise. Independent A and B channel gain controls and separately adjustable crossover sections provide useful setup flexibility.\u003c\/p\u003e\u003cp\u003eFor outdoor-oriented installations, the KAC-M1814 includes conformal coating to help protect the circuit board from rust and vibration-related exposure. Its covered connectors are designed to help keep out water and dust. The amplifier fits neatly into a system using four speakers, or it can be used bridged for two compatible channels where higher per-channel output is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Amplification:\u003c\/strong\u003e Adds 45 watts RMS to each of four channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Output:\u003c\/strong\u003e Supports two-channel bridged operation at compatible 4-ohm loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Connects to systems without RCA preamp outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sensing Turn-On:\u003c\/strong\u003e Powers on when an input signal is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Adjustable high-pass and low-pass filtering from 50 to 200 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConformal-Coated Circuit Board:\u003c\/strong\u003e Helps protect the electronics in marine and motorsports use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-M1814 uses a compact aluminum heat-sink chassis with a 145 x 45 x 99 mm enclosure size. Its Class D design, covered connector arrangement, and conformal-coated circuit board suit installations where space and environmental exposure are considerations. The amplifier also uses a Power MOS-FET switching power supply and separate preamp and power-amp sections.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a secure location with appropriate ventilation and connect it to a 12-volt DC vehicle electrical system. It can accept RCA line-level inputs or speaker-level inputs, while its included DC cable and RCA cables support basic installation connections. Set the A and B channel gain and crossover controls to match the connected speakers and chosen system layout.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633058177094,"sku":"KAC-M1814","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FANe4bUgL.jpg?v=1784404356"},{"product_id":"kenwood-kac-m5001-compact-mono-marine-amplifier","title":"Kenwood KAC-M5001 Compact Mono Marine Amplifier","description":"\u003cp\u003eThe Kenwood KAC-M5001 is a compact mono Class D amplifier designed to add dedicated subwoofer power to cars, boats, and other outdoor audio systems. It supplies up to 300 watts RMS at 2 ohms or 200 watts RMS at 4 ohms for a single subwoofer channel. Its compact sealed format helps solve the challenge of adding bass where installation space and environmental exposure are concerns.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to listeners building a modest subwoofer system in a vehicle or marine application. Its mono design focuses its output on low-frequency reproduction, with a variable low-pass filter and selectable bass-boost frequency for system tuning. A wired level control is included so the subwoofer output can be adjusted from a convenient mounting location.\u003c\/p\u003e\u003cp\u003eThe KAC-M5001 uses Class D amplification for efficient subwoofer power in a small chassis. Kenwood specifies a 20 Hz to 200 Hz frequency response, a 20 Hz infrasonic filter, and a low-pass filter adjustable from 50 Hz to 200 Hz. Polymer multi-layer capacitors in the LC filter circuit and magnetic shielding around the output coils are designed to support clean bass performance with reduced radiated noise.\u003c\/p\u003e\u003cp\u003eFor harsh environments, the amplifier has IP67\/IP66 waterproof and dustproof certification, along with ASTM B117 salt-spray testing for the main amplifier unit. Its sealed cast-aluminum chassis incorporates a thick die-cast frame and raised drain tunnel to help manage vibration and moisture. The included remote level control is also waterproof and UV resistant.\u003c\/p\u003e\u003cp\u003eInstallation options support both aftermarket and factory-style audio systems. RCA line input is provided for compatible receivers, while speaker-level input can accept an audio signal from systems without RCA outputs. Signal-sensing turn-on can activate the amplifier when it detects an incoming audio signal, making it a practical addition to an expanded Kenwood or third-party subwoofer system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Output:\u003c\/strong\u003e Delivers 200 watts RMS at 4 ohms or 300 watts RMS at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67\/IP66 Protection:\u003c\/strong\u003e Sealed construction supports use in wet, dusty, and outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts from 50 Hz to 200 Hz for subwoofer integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Connects to audio systems that do not provide RCA outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sensing Turn-On:\u003c\/strong\u003e Powers on when an incoming audio signal is detected.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Level Control:\u003c\/strong\u003e Provides accessible adjustment of subwoofer volume from the included remote.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-M5001 uses a corrosion-resistant sealed cast-aluminum chassis with a thick die-cast frame, terminal cover, rubber fuse cover, and drain tunnel. Metal power studs are used to support high-current battery connections, while the main unit and DC cable are rated for waterproof and dustproof use. Its compact enclosure measures 7-13\/16 inches wide, 1-15\/16 inches high, and 4-1\/8 inches deep.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a location that accommodates its pigtail wiring and avoids sharp bends or pinched cables. Connect a compatible 2- to 8-ohm subwoofer load through the parallel speaker-output leads, then use either the RCA line input or speaker-level input according to the source unit. Set the low-pass filter, infrasonic filter, bass boost, and wired level control to blend the subwoofer with the rest of the audio system.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633058275398,"sku":"KAC-M5001","price":280.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-anGHhsGL.jpg?v=1784404398"},{"product_id":"kenwood-kac-m5024bt-4-channel-bluetooth-marine-amplifier","title":"Kenwood KAC-M5024BT 4-Channel Bluetooth Marine Amplifier","description":"\u003cp\u003eThe Kenwood KAC-M5024BT is a compact four-channel Class D amplifier designed for marine, powersports, motorcycle, ATV, UTV, and vehicle audio systems. It combines amplification and Bluetooth audio streaming in one weather-resistant component, making it useful where installing a conventional receiver is impractical. With four amplified channels, it can power a full speaker system or be configured for bridged two-channel operation.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the amplifier delivers 50 watts RMS to each of four channels, with 75 watts RMS per channel available at 2 ohms. Its Class D design provides efficient power delivery in a small chassis measuring under eight inches wide. The adjustable high-pass and low-pass filters help tailor the amplifier for full-range speakers or a mixed speaker-and-subwoofer system.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets a compatible phone or media device stream directly to the amplifier without a wired RCA source input. The included wired Bluetooth remote provides source control, volume adjustment, track controls, and access to EQ settings. Bluetooth supports A2DP and AVRCP profiles, plus aptX and AAC audio codecs.\u003c\/p\u003e\u003cp\u003eThe KAC-M5024BT is engineered for exposed installations where moisture, dust, salt spray, and vibration are concerns. Its sealed cast-aluminum chassis, terminal cover, drain tunnel design, and stainless-steel mounting hardware support use in marine and off-road environments. The main unit is rated for IPX7, IPX6, and IP6X protection and is tested to ASTM B117 salt-spray standards.\u003c\/p\u003e\u003cp\u003eThis amplifier is a practical foundation for a compact audio upgrade that does not require a traditional head unit. Its RCA pre-output can feed an additional amplifier or powered subwoofer for future system expansion. A switchable 2-channel or 3\/4-channel output mode and remote-controlled pre-out level provide flexible setup options.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Power:\u003c\/strong\u003e Delivers 50 watts RMS per channel at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Bluetooth Streaming:\u003c\/strong\u003e Plays compatible device audio without an RCA source input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Construction:\u003c\/strong\u003e IPX7, IPX6, and IP6X-rated main unit protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Wired Remote:\u003c\/strong\u003e Provides volume, playback, Bluetooth, and EQ control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Crossovers:\u003c\/strong\u003e Adjustable high-pass and low-pass filtering supports system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Pre-Out Expansion:\u003c\/strong\u003e Connect an additional amplifier or powered subwoofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier uses a corrosion-resistant sealed cast-aluminum chassis with a drain tunnel intended to reduce moisture accumulation below the unit. Its one-sided wiring layout, terminal cover, molded strain-relief bushings, and thick die-cast mounting section are intended for organized installation in marine and powersports applications. Stainless-steel self-tapping screws are included for mounting.\u003c\/p\u003e\u003cp\u003eInstall the KAC-M5024BT on a secure surface with ventilation and route its attached power\/ground and speaker-output harnesses safely away from heat, moving parts, and sharp edges. It operates from a 12-volt electrical system with 11 to 16 volts allowable and uses a 40-amp fuse. Connect compatible 2- to 8-ohm speakers, use 4- to 8-ohm loads when bridging channels, and mount the included remote where Bluetooth and playback controls are accessible.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633063321670,"sku":"KAC-M5024BT","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71MGZMXqAqL.jpg?v=1784404439"},{"product_id":"kenwood-kac-m8005-5-channel-marine-power-amplifier","title":"KENWOOD KAC-M8005 5-Channel Marine Power Amplifier","description":"\u003cp\u003eThe KENWOOD KAC-M8005 is a Class D five-channel power amplifier built for marine and motorsports audio systems. It provides dedicated amplification for four full-range speakers plus a subwoofer from one compact chassis. This makes it a practical choice for boats, ATVs, side-by-sides, and other 12-volt systems that need a complete amplified speaker-and-subwoofer setup.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the amplifier delivers 50 watts RMS to each of four main channels and 300 watts RMS to the subwoofer channel. It can also run the main channels at 2 ohms for 75 watts RMS per channel, while the subwoofer channel supplies up to 500 watts RMS at 2 ohms. The result is flexible power matching for a system using marine speakers with a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eThe KAC-M8005 uses a Class D design with a Power MOS-FET switching power supply and an extruded aluminum heat sink. Its conformal-coated circuit board supports use in marine and powersports environments, while the manual specifies mounting the amplifier away from direct water splash, excessive heat, humidity, and dust. A built-in protection circuit helps safeguard the amplifier and connected speakers in certain fault or overheating conditions.\u003c\/p\u003e\u003cp\u003eSeparate adjustable high-pass filters for the A and B speaker channels help remove low bass from full-range speakers when a subwoofer handles the lower frequencies. The dedicated subwoofer channel includes an adjustable low-pass filter and variable bass boost. Independent gain controls for the A, B, and subwoofer sections allow the system to be balanced for the connected source, speakers, and subwoofer.\u003c\/p\u003e\u003cp\u003eRCA line-level inputs and speaker-level input capability support installations with either aftermarket or compatible factory audio sources. Signal-sensing turn-on can switch the amplifier on when it detects an input signal, which can simplify integration in systems without a conventional remote-turn-on lead. Its 9-inch-wide footprint is suited to installations where space is limited but five amplified channels are needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four speakers and one subwoofer from a single amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Amplification:\u003c\/strong\u003e Delivers multi-channel power in a compact amplifier chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConformal-Coated Circuit Board:\u003c\/strong\u003e Supports marine and motorsports-oriented installation environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Tailor high-pass and low-pass frequency ranges to connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Input:\u003c\/strong\u003e Enables connection with compatible factory or aftermarket source outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sensing Turn-On:\u003c\/strong\u003e Can activate when an input signal is detected.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-M8005 combines a conformal-coated circuit board with a Power MOS-FET switching power supply and extruded aluminum heat sink. It measures 9 inches wide by 2-3\/16 inches high by 7-3\/8 inches deep and weighs 4.5 pounds. Although designed for marine and motorsports applications, it should be installed in a protected location away from direct sunlight, excessive heat, high humidity, dust, and water splash.\u003c\/p\u003e\u003cp\u003eUse it in a 12-volt negative-ground electrical system and run the battery lead directly from the battery with an appropriately placed protective fuse or circuit breaker. The manual calls for automotive-grade power and ground wiring of AWG 10 or larger, while the amplifier supports 2-ohm stereo\/subwoofer loads and 4- to 8-ohm bridged loads. Four self-tapping mounting screws and one hex wrench are supplied; source wiring, terminals, speakers, subwoofer, and protective fuse or breaker separately.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633069547590,"sku":"KAC-M8005","price":500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81iTTTuXHvL.jpg?v=1784404486"},{"product_id":"kenwood-kca-r100-full-hd-rear-dash-camera","title":"Kenwood KCA-R100 Full HD Rear Dash Camera","description":"\u003cp\u003eThe Kenwood KCA-R100 is an optional rear camera designed to add rear-window video recording to a compatible Kenwood dash camera system. It gives drivers a second recording angle behind the vehicle while the front camera records ahead. This makes it a practical add-on for drivers who want front-and-rear incident documentation without installing a separate standalone rear recorder.\u003c\/p\u003e\u003cp\u003eIts imaging performance is built around a 1\/2.8-inch CMOS sensor, Full HD 1920 x 1080 recording, and a 30 fps frame rate. The F2.0 fixed-focus lens provides a 129-degree horizontal, 66-degree vertical, and 161-degree diagonal field of view. Video is recorded in H.264 MOV format for use with the connected compatible dash camera.\u003c\/p\u003e\u003cp\u003eThe KCA-R100 uses a 180-degree adjustable lens position to help accommodate different rear-window angles and vehicle layouts. This adjustability is useful for cars, trucks, and RVs where the camera may need to be aimed differently to achieve the intended rearward view. The supplied adhesive mount supports a clean installation on the inside of the rear windshield.\u003c\/p\u003e\u003cp\u003eAn 8-meter rear-camera cable connects the KCA-R100 to the CAM-IN port of a compatible dashboard camera. The rear camera receives power through this connection and begins recording when power is available through the dash camera system. Footage from the front and rear cameras is recorded simultaneously when paired with a compatible model.\u003c\/p\u003e\u003cp\u003eThe KCA-R100 is compatible with Kenwood DRV-A501W and DRV-A700W front dash cameras. It is not a standalone dash camera and requires a compatible Kenwood front camera for operation and recording. For a tidy, safe installation, route the cable through interior trim while keeping it clear of airbags and the driver's field of view.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull HD Recording:\u003c\/strong\u003e Captures rear video at 1920 x 1080 resolution and 30 fps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2.8-Inch CMOS Sensor:\u003c\/strong\u003e Provides dedicated rear-facing image capture for compatible dash cam systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF2.0 Fixed-Focus Lens:\u003c\/strong\u003e Delivers a wide rearward view without requiring manual focus adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e161-Degree Diagonal View:\u003c\/strong\u003e Covers a broad area behind the vehicle for rear recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180-Degree Lens Rotation:\u003c\/strong\u003e Lets you adjust the camera angle for the mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Meter Connection Cable:\u003c\/strong\u003e Supports routing from the rear windshield to the front dash camera.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe compact KCA-R100 measures 63 x 66 x 36 mm and uses an adhesive mounting system for interior rear-window placement. Its adjustable mounting holder allows the lens position to be changed up to 180 degrees. The package includes the rear camera, adhesive mount, 8-meter Mini USB cable, adhesive pads, and spare 3M adhesive pads.\u003c\/p\u003e\u003cp\u003eInstall the camera where it does not obstruct the driver's view, then connect its cable to the CAM-IN port on a compatible Kenwood dashboard camera. Clean and dry the mounting surface before applying the adhesive, and allow 24 hours for the adhesive to achieve its best bond. Route the cable behind headliner and trim panels as appropriate, ensuring it does not interfere with airbags or vehicle operation.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633077805126,"sku":"KCA-R100","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71gBCYUmqFL.jpg?v=1784404535"},{"product_id":"kenwood-kca-r110-full-hd-rear-dash-camera","title":"KENWOOD KCA-R110 Full HD Rear Dash Camera","description":"\u003cp\u003eThe KENWOOD KCA-R110 is an optional rear-view recording camera designed to add rear coverage to compatible KENWOOD dash cam systems. It connects to a compatible front dash cam to capture video behind the vehicle while the front camera records ahead. It is intended for drivers who want added documentation of traffic, cargo-area activity, or events occurring behind their car, truck, or RV.\u003c\/p\u003e\u003cp\u003eThis compact camera records Full HD 1920 x 1080 video at 30 frames per second. Its 131.6° diagonal field of view provides broad rearward coverage, while the F2.0 fixed-focus lens is designed for continuous in-vehicle recording. HDR is included to support more balanced image capture in scenes with challenging light contrast.\u003c\/p\u003e\u003cp\u003eThe KCA-R110 uses a 1\/2.9-inch Galaxy Core GC2093 image sensor with 2 million recording pixels. It records H.264 video in MP4 format and supports invert or mirror image reversal for different mounting orientations. The camera is a recording accessory for a dash cam system, rather than a stand-alone parking-display camera.\u003c\/p\u003e\u003cp\u003eAn IP67-rated camera housing supports installation inside or outside the vehicle. The camera is sealed against dust and is rated for temporary water immersion, making it suitable for rear-window, exterior, truck, and RV applications when installed appropriately. Its adjustable mounting hardware helps position the lens for sloped, vertical, or flat mounting surfaces.\u003c\/p\u003e\u003cp\u003eThe included 26-foot, 3-inch rear-camera cable provides room to route the connection from the front dash cam to the rear of many vehicles. The KCA-R110 is compatible with KENWOOD DRV-A310W and DRV-A510W dash cams for simultaneous front-and-rear recording. Motion-detection and parking-recording functions are features of the compatible dash cam system and require the optional KENWOOD CA-DR1130 hardwire kit where supported.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull HD Recording:\u003c\/strong\u003e Captures rear video at 1920 x 1080 resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e131.6° Diagonal View:\u003c\/strong\u003e Provides broad rearward recording coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Camera Housing:\u003c\/strong\u003e Resists dust and temporary water immersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDR Imaging:\u003c\/strong\u003e Helps manage bright and dark areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Mounting:\u003c\/strong\u003e Supports multiple mounting angles and surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26-Foot Cable:\u003c\/strong\u003e Allows routing to the rear of larger vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KCA-R110 combines a compact camera body with an F2.0 fixed-focus lens, an IP67-rated housing, and noise protection. The camera supports image inversion and mirroring to accommodate different installation orientations. Included adhesive and screw-mount hardware, plus a double-joint bracket, provide options for interior or exterior placement.\u003c\/p\u003e\u003cp\u003eConnect the supplied rear-camera cable to the CAM IN port on a compatible KENWOOD front dash cam, then route the cable safely to the selected rear mounting position. KENWOOD recommends avoiding driver-visibility obstructions, airbags, rear defroster lines, and other items that can affect the field of view. For exterior installation or wiring near vehicle airbags, professional installation is recommended.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633122369606,"sku":"KCA-R110","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51wWI6xkd_L.jpg?v=1784404580"},{"product_id":"kenwood-kca-rc35mr-wired-marine-remote-control","title":"Kenwood KCA-RC35MR Wired Marine Remote Control","description":"\u003cp\u003eThe Kenwood KCA-RC35MR is a compact wired remote control for compatible Kenwood marine and motorsports receivers. It places essential receiver commands at an additional location, helping keep source, track, and volume controls within reach away from the main head unit. It is intended for boat, UTV, and other powersports installations where the receiver may not be conveniently accessible.\u003c\/p\u003e\u003cp\u003eThis remote does not produce audio itself; it provides direct command of the connected receiver so the system can be adjusted from a secondary position. Its button layout includes source selection, seek controls, preset up\/down functions, volume adjustment, and mute or pause control. White key illumination supports visibility when operating the system in low-light conditions.\u003c\/p\u003e\u003cp\u003eThe KCA-RC35MR is designed for marine and motorsports use with an IPX7 waterproof design. Its round 2-5\/8-inch format and 5\/8-inch mounting height support a compact, low-profile installation. A supplied gasket and mounting hardware help create a clean surface-mounted fit.\u003c\/p\u003e\u003cp\u003eFor expanded systems, the remote provides a remote-control input and output for in-line installation. Kenwood specifies that up to six remotes can be connected in-line with a compatible receiver. This makes it suitable for adding control access at locations such as a helm, passenger area, transom, or other secondary operating position.\u003c\/p\u003e\u003cp\u003eThe KCA-RC35MR connects through a four-wire installation with ignition, illumination, ground, and remote-control wiring. It requires a compatible Kenwood receiver with a light blue\/yellow remote-control connection. It is an add-on control accessory rather than a standalone radio or audio source.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Control:\u003c\/strong\u003e Adds receiver control at a convenient secondary location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX7 Waterproof Design:\u003c\/strong\u003e Supports use in wet marine and motorsports environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Key Illumination:\u003c\/strong\u003e Helps make controls easier to identify in low light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Round Format:\u003c\/strong\u003e Uses a 2-5\/8-inch-diameter remote body for space-conscious installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Remote Expansion:\u003c\/strong\u003e Allows up to six remotes to be connected in-line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver Function Access:\u003c\/strong\u003e Controls source, track, volume, mute, and preset functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KCA-RC35MR uses a round, gray surface-mount design with illuminated keys and an IPX7 waterproof rating. Its compact 2-5\/8-inch diameter and 5\/8-inch mounting height help it fit locations where a full receiver faceplate would be impractical. The supplied foam gasket, bracket, bolt, lock washer, and wing nut support secure mounting.\u003c\/p\u003e\u003cp\u003eInstallation requires routing the attached four-wire harness through the mounting surface and connecting ignition, illumination, ground, and light blue\/yellow remote-control wiring to a compatible receiver system. The attached harness is 8 inches long, so additional wiring may be needed depending on the mounting location. Use the supplied hardware and fuse, and have marine wiring performed by a qualified installer when appropriate.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633123713094,"sku":"KCA-RC35MR","price":110.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71dpbF1bbiL.jpg?v=1784404633"},{"product_id":"kenwood-kca-rc55mr-wired-marine-remote-control","title":"Kenwood KCA-RC55MR Wired Marine Remote Control","description":"\u003cp\u003eThe Kenwood KCA-RC55MR is a wired marine and motorsports remote control designed to place receiver operation where it is most convenient. It connects to compatible Kenwood receivers, allowing users to manage key functions without returning to the main head unit. Its compact round format is suited to helm stations, passenger areas, consoles, and other secondary control locations.\u003c\/p\u003e\u003cp\u003eThis remote is intended for boat, UTV, ATV, and similar installations where the receiver may be mounted out of reach or out of sight. It provides access to power, volume, source selection, track or station changes, display functions, and selected audio controls. The integrated two-line LCD provides receiver information at the remote location.\u003c\/p\u003e\u003cp\u003eThe KCA-RC55MR does not add amplification or change the sound character of the audio system. Instead, it preserves access to the connected receiver's available functions from another position. This makes it useful for maintaining practical control of music and source playback while underway or away from the primary receiver.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the remote uses an IPX7 waterproof design and white display illumination. Its 3-1\/2-inch round size supports a clean integrated appearance in compatible mounting surfaces. The wired connection avoids battery replacement and communicates directly with the compatible receiver.\u003c\/p\u003e\u003cp\u003eThe KCA-RC55MR can also support multi-remote system layouts when used with the appropriate optional Kenwood splitter and extension cables. Compatible systems can use up to three remotes, depending on the receiver and connection arrangement. It is a focused expansion accessory for Kenwood marine or motorsports receiver installations that need control in more than one location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Control:\u003c\/strong\u003e Places core receiver controls at a secondary location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Line LCD Display:\u003c\/strong\u003e Shows receiver information at the remote position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX7 Waterproof Design:\u003c\/strong\u003e Supports use in marine and motorsports environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhite Illumination:\u003c\/strong\u003e Helps make the display visible in low light.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Remote Capability:\u003c\/strong\u003e Supports expanded systems with compatible optional accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver-Powered Operation:\u003c\/strong\u003e Uses the connected receiver rather than batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KCA-RC55MR has a compact 3-1\/2-inch round face, a two-line LCD, and a weather-oriented IPX7 waterproof construction. Supplied mounting hardware and a foam gasket support a secure installed fit. White illumination complements the display for use after dark.\u003c\/p\u003e\u003cp\u003eMount the remote in a suitable flat location with the specified mounting depth available, then route its attached cable to the remote-control input of a compatible Kenwood receiver. Remote ID registration is required when connecting the unit to supported receivers. For longer runs or multiple remote locations, use the optional Kenwood CA-EX7MR or CA-EX3MR extension cable and CA-Y107MR splitter as applicable.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633123778630,"sku":"KCA-RC55MR","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51jsRF2OY1L.jpg?v=1784404672"},{"product_id":"kenwood-kdc-bt282u-single-din-cd-receiver","title":"KENWOOD KDC-BT282U Single DIN CD Receiver","description":"\u003cp\u003eThe KENWOOD KDC-BT282U is a Single DIN CD receiver for drivers who want modern phone connectivity while retaining CD playback and traditional AM\/FM radio. It brings Bluetooth calling, music streaming, front USB, and front auxiliary input to vehicles with a standard Single DIN radio opening. A detachable faceplate adds a practical layer of security when the vehicle is parked.\u003c\/p\u003e\u003cp\u003eThis receiver suits drivers upgrading an older factory radio or replacing a basic aftermarket unit with hands-free calling and more flexible music sources. Dual-phone connection lets two phones remain connected for calling, while KENWOOD Music Mix supports switching among up to five paired Bluetooth audio devices. The KENWOOD Remote app can control many basic receiver functions from a compatible iPhone or Android phone.\u003c\/p\u003e\u003cp\u003eIts built-in amplifier is rated at 50 watts maximum by four channels, with 22 watts by four channels of full-bandwidth power at less than 1% THD. The receiver supports 4- to 8-ohm speakers and provides a 2.5-volt RCA preout that can be assigned for rear speakers or a subwoofer. This makes it suitable for a straightforward four-speaker system or as the control center for an amplified upgrade.\u003c\/p\u003e\u003cp\u003eSound adjustment is handled by a 13-band equalizer, Digital Time Alignment, and Drive EQ. Digital Time Alignment helps align arrival time from speakers at different positions in the vehicle, while Drive EQ is designed to compensate for road-noise effects. USB playback supports FLAC up to 24-bit\/96 kHz along with WAV, MP3, WMA, and AAC files.\u003c\/p\u003e\u003cp\u003eThe 204-segment, one-line text display is paired with blue and white illumination and direct Bluetooth-access controls. Front-panel USB and auxiliary inputs keep commonly used connections within reach. Menu text can be set to English, Spanish, or French, making this receiver a practical replacement-radio option for compatible 12-volt negative-ground vehicles.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Supports hands-free calling, wireless audio streaming, and phonebook access with compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKENWOOD Music Mix:\u003c\/strong\u003e Lets up to five paired Bluetooth audio devices take turns streaming music.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD And USB Playback:\u003c\/strong\u003e Plays CDs and compatible USB music files, including high-resolution FLAC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ And DTA:\u003c\/strong\u003e Provides detailed tonal adjustment and speaker time-alignment settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Volt RCA Preout:\u003c\/strong\u003e Connect an external amplifier or powered subwoofer for system expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable Faceplate:\u003c\/strong\u003e Allows the faceplate to be removed when leaving the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KDC-BT282U uses the standard 182 x 53 mm Single DIN chassis format and includes a detachable faceplate, trim plate, and mounting sleeve. Its front panel places the USB port and auxiliary input within easy reach, while the one-line 204-segment display presents source and track information. Blue and white illumination gives the controls and display a clear, coordinated appearance.\u003c\/p\u003e\u003cp\u003eInstallation requires a compatible Single DIN dashboard opening and a 12-volt DC negative-ground electrical system. The included wiring harness, mounting sleeve, trim plate, and extraction keys support a conventional in-dash installation, but vehicle-specific harness adapters, antenna adapters, dash kits, and steering-wheel-control interfaces may be needed depending on the vehicle. For safe wiring and mounting, KENWOOD recommends professional installation; mount the receiver at an angle of less than 30 degrees.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633123942470,"sku":"KDC-BT282U","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61eEBtS_fmL.jpg?v=1784404720"},{"product_id":"kenwood-kdc-bt35-single-din-cd-receiver-with-bluetooth","title":"KENWOOD KDC-BT35 Single DIN CD Receiver with Bluetooth","description":"\u003cp\u003eThe KENWOOD KDC-BT35 is a Single DIN CD receiver for drivers who want to refresh an older factory radio with modern phone connectivity while retaining CD playback. It combines Bluetooth calling and audio streaming with front-panel USB and AUX inputs for flexible everyday listening. The compact chassis fits standard Single DIN dash openings and includes a detachable faceplate for added security.\u003c\/p\u003e\u003cp\u003eThis receiver suits vehicles that do not need a touchscreen interface but benefit from straightforward physical controls, radio reception, and smartphone audio access. Bluetooth supports hands-free calling, while the supplied external microphone can be positioned for clearer voice pickup. Dual-phone connection lets two phones remain connected for calling, and Music Mix allows switching among up to five Bluetooth audio devices.\u003c\/p\u003e\u003cp\u003eIts built-in four-channel amplifier delivers up to 22 watts per channel of full-bandwidth power at less than 1% THD, with 50 watts x 4 maximum output. A 13-band equalizer, Digital Time Alignment, and Drive EQ provide useful tools for tailoring the system to the vehicle and listening position. USB playback supports FLAC files up to 24-bit\/96 kHz along with WAV, MP3, WMA, and AAC formats.\u003c\/p\u003e\u003cp\u003eThe KDC-BT35 uses a 255-segment, 1.5-line text display with variable-color illumination to integrate with a range of dashboard lighting colors. It also offers English, Spanish, and French display text options. Amazon Alexa compatibility adds voice interaction through a connected smartphone and the Alexa app.\u003c\/p\u003e\u003cp\u003eFor a larger sound system, the receiver provides three pairs of 2.5-volt RCA preouts for front, rear, and subwoofer amplification. It is SiriusXM Radio Ready when used with a compatible optional SiriusXM vehicle tuner. This makes the KDC-BT35 a practical foundation for a basic speaker replacement, an amplified speaker system, or a system with a powered subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Supports hands-free calls, audio streaming, and compatible phonebook access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMusic Mix:\u003c\/strong\u003e Switch among up to five Bluetooth audio devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ and DTA:\u003c\/strong\u003e Adjust tonal balance and speaker timing for your vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront USB and AUX:\u003c\/strong\u003e Connect flash drives, phones, and portable audio players.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 2.5V RCA Preouts:\u003c\/strong\u003e Add external amplifiers or a powered subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Color Illumination:\u003c\/strong\u003e Match the receiver lighting with your dashboard.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KDC-BT35 is a purpose-built CD receiver with a compact Single DIN chassis, detachable faceplate, front-access USB and AUX connections, and a 255-segment 1.5-line text display. KENWOOD specifies variable-color LED illumination for visual integration with different dash lighting colors. The included trim plate and mounting sleeve support a clean conventional receiver installation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a Single DIN radio opening before purchase; the receiver installation size is 7-3\/16 inches wide by 2-1\/16 inches high by 6-1\/8 inches deep. Vehicle-specific wiring interfaces, dash kits, antenna adapters, steering-wheel-control interfaces, and SiriusXM hardware are not included unless separately supplied by the installer or retailer. Use the front USB input for supported music files and charging, connect the supplied microphone at the rear microphone input, and use the RCA preouts when adding external amplification.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633124073542,"sku":"KDC-BT35","price":261.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61BVikXZibL.jpg?v=1784404762"},{"product_id":"kenwood-kdc-bt382u-single-din-cd-receiver-with-bluetooth","title":"KENWOOD KDC-BT382U Single DIN CD Receiver with Bluetooth","description":"\u003cp\u003eThe KENWOOD KDC-BT382U is a single-DIN CD receiver for drivers who want to retain physical-disc playback while adding Bluetooth streaming, hands-free calling, and front-panel device connections. It is suited to factory-radio replacements in vehicles with a standard single-DIN radio opening. AM\/FM tuning, CD playback, USB, AUX, and Bluetooth give you several ways to access music on the road.\u003c\/p\u003e\u003cp\u003eIts built-in four-channel amplifier delivers up to 22 watts per channel of full-bandwidth power, making it a practical match for common 4- to 8-ohm car speakers. The receiver also provides 50 watts maximum output per channel. For a more tailored listening setup, the 13-band equalizer, Digital Time Alignment, and Drive EQ help adapt sound to the vehicle cabin.\u003c\/p\u003e\u003cp\u003eBluetooth 4.2 supports wireless audio streaming and hands-free phone use, with profiles for calling, phonebook access, audio playback, and basic source control. Dual Phone Connection lets users switch between two connected phones. Music Mix supports connection of up to five Bluetooth devices for shared streaming control.\u003c\/p\u003e\u003cp\u003eFor compatible smartphones, Amazon Alexa can be accessed through the receiver's dedicated Alexa key and Bluetooth connection. The KENWOOD Remote app can control many basic receiver functions from a paired iPhone or Android device. Front USB and AUX inputs provide convenient wired options for compatible phones, USB drives, and other portable sources.\u003c\/p\u003e\u003cp\u003eThe KDC-BT382U can serve as the foundation of a modest factory-speaker refresh or a larger amplified audio system. Three 2.5-volt RCA preouts provide front, rear, and subwoofer outputs for external amplification. SiriusXM readiness also allows expansion with a compatible optional SiriusXM vehicle tuner.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD and Digital Playback:\u003c\/strong\u003e Plays CDs plus compatible USB audio files and portable sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Enables hands-free calls and wireless music streaming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMusic Mix:\u003c\/strong\u003e Connects up to five Bluetooth devices for shared streaming.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ and DTA:\u003c\/strong\u003e Helps tune tonal balance and speaker timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree RCA Preouts:\u003c\/strong\u003e Supports front, rear, and subwoofer amplifier connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Color Illumination:\u003c\/strong\u003e Lets the button lighting complement compatible dash colors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis receiver uses a conventional single-DIN chassis with a 255-segment, 1.5-line text display, front USB port, front AUX input, and variable-color illumination. Its detachable faceplate is designed for removable front-panel access. The compact chassis measures 182 mm wide, 53 mm high, and 155.5 mm deep.\u003c\/p\u003e\u003cp\u003eInstallation requires a 12-volt negative-ground vehicle electrical system and appropriate vehicle-specific mounting and wiring parts as needed. The package documentation identifies a faceplate, trim plate, mounting sleeve, wiring harness, and extraction keys for installation. For vehicles with factory steering-wheel audio controls, a compatible external steering-wheel-control adapter is required.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633124270150,"sku":"KDC-BT382U","price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61skVr2wLaL.jpg?v=1784404803"},{"product_id":"kenwood-kdc-bt782hd-single-din-cd-receiver-with-bluetooth","title":"Kenwood KDC-BT782HD Single DIN CD Receiver with Bluetooth","description":"\u003cp\u003eThe Kenwood KDC-BT782HD is a single-DIN CD receiver for drivers who want modern phone connectivity while retaining CD playback and traditional radio. It combines Bluetooth, front USB, front auxiliary input, HD Radio, and optional SiriusXM expansion in a compact in-dash format. The receiver is suited to factory-radio replacement projects where a touchscreen-based multimedia receiver is not required.\u003c\/p\u003e\u003cp\u003eIts built-in four-channel amplifier supplies up to 22 watts RMS per channel at less than 1% THD, with a 50-watt maximum rating per channel. Bluetooth supports hands-free calling and wireless music playback, while the front USB input supports compatible portable devices and USB drives. A supplied microphone supports Bluetooth calling and Alexa voice interaction.\u003c\/p\u003e\u003cp\u003eSound tuning is a central part of the KDC-BT782HD design. It provides 13-band manual EQ, 3-band Easy EQ, eight EQ presets, Drive EQ, Stage EQ, bass boost, loudness, adjustable crossovers, and digital time alignment. These controls help tailor the receiver for different speaker layouts, listening positions, and road-noise conditions.\u003c\/p\u003e\u003cp\u003eAmazon Alexa compatibility lets a paired smartphone and the Alexa mobile app provide voice access to supported Alexa functions. The receiver can be activated with its Alexa control or by voice after setup, and it requires a Bluetooth connection and smartphone internet access. Because Alexa is a third-party cloud service, its available functions and compatibility can change.\u003c\/p\u003e\u003cp\u003eThe KDC-BT782HD also provides a practical foundation for a larger audio system. Its three 4-volt RCA preouts provide front, rear, and subwoofer outputs for external amplifiers or a powered subwoofer. With variable-color illumination, a detachable faceplate, and a 255-segment 1.5-line text display, it is designed for a clean, conventional single-DIN upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.2:\u003c\/strong\u003e Supports wireless music streaming, hands-free calls, dual-phone connection, and Bluetooth audio switching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmazon Alexa Ready:\u003c\/strong\u003e Enables Alexa voice functions through a compatible paired smartphone and the Alexa app.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD Radio Tuner:\u003c\/strong\u003e Receives analog and digital AM\/FM broadcasts, including supported HD multicast channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Band EQ And DTA:\u003c\/strong\u003e Provides detailed frequency adjustment and digital time alignment for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront USB And AUX:\u003c\/strong\u003e Gives convenient access for USB music playback, charging, and analog portable-audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree 4-Volt Preouts:\u003c\/strong\u003e Provides front, rear, and subwoofer RCA outputs for external amplification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KDC-BT782HD uses a compact single-DIN chassis with a detachable faceplate, front-loading CD slot, front USB port, and front auxiliary input. Its 255-segment 1.5-line LCD text display presents source information and clock information, while variable-color illumination can be adjusted to complement dashboard lighting. The display menu supports English, Canadian French, and Spanish.\u003c\/p\u003e\u003cp\u003eInstallation requires a compatible single-DIN dashboard opening, a 12-volt negative-ground vehicle electrical system, and proper vehicle-specific wiring integration. Kenwood includes a trim plate, mounting sleeve, wiring harness, extraction keys, installation screws, faceplate, and microphone; a vehicle-specific dash kit, wiring harness adapter, antenna adapter, or steering-wheel-control interface may be needed depending on the vehicle. The rear RCA outputs are useful when adding amplifiers or a powered subwoofer, while SiriusXM requires a separately sold compatible vehicle tuner and subscription.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633140457542,"sku":"KDC-BT782HD","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71vZGSrCmdL.jpg?v=1784405151"},{"product_id":"kenwood-kfc-1096ps-4-2-way-car-speakers","title":"Kenwood KFC-1096PS 4\" 2-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-1096PS is a pair of 4-inch, 2-way coaxial car speakers designed to replace worn or limited factory speakers in compatible locations. Its compact round format is suited to vehicles that use 4-inch speaker openings and need a shallow mounting profile. The pair is rated for 50 watts RMS power handling and 220 watts peak power.\u003c\/p\u003e\u003cp\u003eThese speakers use a polypropylene woofer cone with a rubber surround and a 1-inch balanced-dome tweeter. This two-way arrangement combines midrange and high-frequency reproduction in a single speaker assembly. With a 114 Hz to 25 kHz frequency response, the KFC-1096PS is intended for full-range speaker positions rather than dedicated low-frequency subwoofer duty.\u003c\/p\u003e\u003cp\u003eKenwood's Diamond Array Pattern Woofer Cone is designed to help reduce distortion while supporting controlled cone behavior. The Acoustic Sound Harmonizer uses the tweeter-panel structure to manage woofer sound waves for a smoother transition through the upper-frequency range. A Sound Field Enhancer shape around the tweeter is designed to promote forward sound and wider high-frequency dispersion.\u003c\/p\u003e\u003cp\u003eThe KFC-1096PS uses a 4-ohm impedance, making it appropriate for many standard aftermarket car-audio systems. Its 85 dB sensitivity rating and 50-watt RMS rating provide useful matching information when selecting a compatible receiver or amplifier. For amplified systems, use an amplifier channel that is stable at 4 ohms and appropriately matched to the speaker's continuous power rating.\u003c\/p\u003e\u003cp\u003eWith a 3-11\/16-inch cutout requirement and 1-11\/16-inch mounting depth, these speakers can fit many compact factory locations when the vehicle provides sufficient clearance. The included grilles also support installations where the speakers will be visible rather than installed behind factory panels. They can serve as a direct speaker replacement or as part of a broader system upgrade with an aftermarket receiver, amplifier, or subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch 2-Way Design:\u003c\/strong\u003e Combines woofer and tweeter drivers in each compact coaxial speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material with a rubber surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Balanced-Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency detail within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Controls woofer sound waves through the tweeter-panel openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Helps project high frequencies forward and broaden dispersion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1096PS uses a black polypropylene woofer cone, rubber surround, steel basket, ferrite woofer magnet, and neodymium tweeter magnet. Its Diamond Array cone pattern, black-painted yoke and plate, and revised woofer damper shape are engineering details intended to support controlled operation and durability. Each speaker measures 5-5\/16 inches across with its grille installed.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available cutout diameter, mounting depth, and clearance above the speaker before installation. The package includes two speakers, grilles and grille frames, two 20-inch speaker-wire lengths, mounting screws, speed clips, grille putty, and documentation. Use correct polarity when connecting the speaker wire, and match the installation to a 4-ohm compatible receiver or amplifier channel.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633140588614,"sku":"KFC-1096PS","price":94.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71lMt3qVAhL.jpg?v=1784405197"},{"product_id":"kenwood-kfc-1366s-5-1-4-2-way-coaxial-speakers","title":"Kenwood KFC-1366S 5-1\/4\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Kenwood KFC-1366S is a pair of 5-1\/4-inch, 2-way coaxial car speakers designed for replacing compatible factory door, dash, or rear-deck speakers. Its compact format provides an option for vehicles with limited speaker mounting space. The speakers use a 4-ohm design suitable for many conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want a straightforward factory-speaker replacement with separate woofer and tweeter elements built into each speaker. The 5-1\/4-inch polypropylene woofer handles the lower and midrange portions of the audio signal, while the 1-inch balanced dome tweeter reproduces higher frequencies. Kenwood specifies a 45 Hz to 22 kHz frequency response and 89 dB sensitivity.\u003c\/p\u003e\u003cp\u003eThe KFC-1366S uses a polypropylene woofer cone with a cloth surround, paired with a PEI balanced dome tweeter. This coaxial arrangement keeps both drivers in one mounting location, helping simplify installation where separate tweeter mounting is not desired. An enlarged magnet circuit and Sound Field Enhancer are part of the speaker design.\u003c\/p\u003e\u003cp\u003eWith 30 watts rated input power and 260 watts peak input power, these speakers can be used with an appropriately matched factory radio or external amplifier. Their 4-ohm impedance should be matched to an audio source designed to drive 4-ohm speakers. They are supplied as a pair for left\/right replacement or expansion within a vehicle audio system.\u003c\/p\u003e\u003cp\u003eThe 1-3\/4-inch mounting depth and 4-7\/16-inch cutout diameter are key measurements to verify before purchase. Kenwood also lists a low 5\/16-inch mounting height to help accommodate more mounting locations. Included grilles, wiring leads, screws, and speed nuts support a basic installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-1\/4-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker System:\u003c\/strong\u003e Separates low\/mid and high-frequency reproduction between two drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the main 5-1\/4-inch woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency audio within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many standard automotive speaker circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mounting Hardware:\u003c\/strong\u003e Supplies grilles, screws, speed nuts, and speaker cords.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1366S uses a black steel basket, ferrite woofer magnet, polypropylene cone, and cloth surround. Each speaker has a 1-inch PEI balanced dome tweeter mounted concentrically with the woofer. Grilles are included for installations where the speaker face needs protection or a finished appearance.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available opening, clearance, and wiring arrangement before installation. The required cutout diameter is 4-7\/16 inches and mounting depth is 1-3\/4 inches; the speaker measures 6-3\/16 inches across with its grille. The package includes two 0.3-meter speaker cords, eight 4 x 25 mm tapping screws, and eight speed nuts, while vehicle-specific brackets or wire adapters are not listed.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633140686918,"sku":"KFC-1366S","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/813FgBeYkuL.jpg?v=1784405242"},{"product_id":"kenwood-kfc-1396ps-5-1-4-2-way-car-speakers","title":"Kenwood KFC-1396PS 5-1\/4\" 2-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-1396PS is a pair of 5-1\/4-inch round 2-way car speakers designed to replace worn or limited factory speakers. Its compact format is suited to many factory speaker locations where a shallow mounting profile is important. With a 4-ohm impedance, the pair can be used with compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who want clearer full-range sound from a small-door or dash-compatible speaker location. The 75-watt RMS power rating supports use with an appropriately matched amplifier, while the 320-watt peak rating describes short-duration handling. An 80 Hz to 25 kHz frequency response covers midrange and high-frequency duties in a typical vehicle audio system.\u003c\/p\u003e\u003cp\u003eA 5-1\/4-inch black polypropylene woofer cone handles the main range, supported by a rubber surround and steel basket. Kenwood's Diamond Array Pattern cone design is intended to help reduce distortion. The result is a coaxial speaker format that combines the woofer and tweeter in one assembly.\u003c\/p\u003e\u003cp\u003eA 1-inch balanced-dome tweeter handles upper-frequency detail, while the Sound Field Enhancer is designed to direct high frequencies forward and broaden the sound field above 5 kHz. The Acoustic Sound Harmonizer uses openings in the tweeter panel to manage woofer sound waves. Together, these elements support a smoother transition between the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThe KFC-1396PS is a practical option for replacing compatible 5-1\/4-inch factory speakers or building a modest multi-speaker upgrade. Its 4-7\/16-inch cutout requirement and 1-13\/16-inch mounting depth should be checked against the vehicle before installation. Grilles are included for installations where the speakers will be visible rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-1\/4-Inch 2-Way Design:\u003c\/strong\u003e Combines a woofer and tweeter in each speaker for full-range vehicle audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power:\u003c\/strong\u003e Provides a continuous power-handling reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Peak Power:\u003c\/strong\u003e Supports short-duration musical peaks within the speaker's rated limits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Woofer Cone:\u003c\/strong\u003e Uses a patterned polypropylene cone intended to help reduce distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Shapes tweeter output for stronger forward high-frequency sound and wider dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Controls woofer sound waves through the tweeter-panel openings for smoother sound.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1396PS uses a black polypropylene woofer cone, rubber surround, steel basket, ferrite woofer magnet, and neodymium tweeter magnet. Its balanced-dome tweeter has a matte-black finish. Black-painted yoke and plate components are designed to release heat within the magnetic circuit, while the woofer damper incorporates stress-leveling points.\u003c\/p\u003e\u003cp\u003eConfirm that the installation location accepts a 4-7\/16-inch cutout and provides at least 1-13\/16 inches of mounting depth. Use the supplied grilles for exposed custom installations, or retain the vehicle's factory grilles where applicable. Match the speakers to a compatible 4-ohm radio or amplifier and avoid exceeding the 75-watt RMS rating per speaker.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633140817990,"sku":"KFC-1396PS","price":91.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91ERbFdhNGL.jpg?v=1784405285"},{"product_id":"kenwood-kfc-1398rs-5-1-4-2-way-car-speakers","title":"KENWOOD KFC-1398RS 5-1\/4\" 2-Way Car Speakers","description":"\u003cp\u003eThe KENWOOD KFC-1398RS is a pair of 5-1\/4-inch, 2-way coaxial car speakers designed as a direct replacement option for many factory speaker locations. They provide an upgrade path for vehicles with worn, limited-range, or lower-output factory speakers. With a compact mounting profile and included installation hardware, they are suited to door, dash, or other locations that accept this speaker size.\u003c\/p\u003e\u003cp\u003eThese speakers are rated for 75 watts RMS power and 330 watts peak input power, with a 4-ohm impedance for use with compatible car audio systems. Their 85 dB sensitivity and 82 Hz to 21 kHz frequency response support clear midrange and high-frequency reproduction in a compact format. They can be connected to a compatible aftermarket or factory head unit, or paired with an external amplifier matched appropriately to their rating.\u003c\/p\u003e\u003cp\u003eA 5-1\/4-inch polypropylene woofer cone with KENWOOD's Diamond Array Pattern handles the low and midrange frequencies. The rubber surround supports cone movement, while the steel basket provides a stable mounting structure. This construction is intended to reduce distortion and provide a controlled sound response.\u003c\/p\u003e\u003cp\u003eThe integrated 1-inch balanced-dome tweeter covers the upper-frequency range without requiring separate tweeter mounting. KENWOOD's Acoustic Sound Harmonizer uses the tweeter-panel design to manage woofer sound waves for smoother response. The Sound Field Enhancer tweeter shape is designed to project high frequencies forward and widen the sound field at 5 kHz and above.\u003c\/p\u003e\u003cp\u003eThe KFC-1398RS is a practical choice for a small-speaker factory-location upgrade where depth is limited. Its 1-13\/16-inch mounting depth and 1\/4-inch tweeter height help it fit many recessed mounting locations. Verify the vehicle's opening, mounting depth, connector style, and factory mounting provisions before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-1\/4-Inch Two-Way Design:\u003c\/strong\u003e Combines a woofer and integrated tweeter in one coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power:\u003c\/strong\u003e Supports use with compatible head units or properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Woofer:\u003c\/strong\u003e Polypropylene cone pattern is designed to enhance sound and reduce distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e The 1-inch tweeter handles upper frequencies with an integrated design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Helps manage woofer sound waves for smoother, more natural response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Factory Fit:\u003c\/strong\u003e Shallow tweeter height and compact depth aid installation in many factory locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1398RS uses a black polypropylene woofer cone, rubber surround, steel basket, and steel top plate\/yoke with a black finish. Its woofer uses a ferrite magnet, while the balanced-dome tweeter uses a neodymium magnet. The optimized woofer damper shape is designed with stress-leveling points to support durability and smoother sound response.\u003c\/p\u003e\u003cp\u003eConfirm a 4-7\/16-inch cutout diameter and at least 1-13\/16 inches of mounting depth at the intended location before ordering. The package includes grilles, tapping screws, speed nuts, speaker cords, adhesive tape, and a warranty card; vehicle-specific brackets, adapters, and harnesses may still be needed. Use the supplied hardware where appropriate, observe speaker polarity, and match the speakers with a compatible 4-ohm audio source.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141014598,"sku":"KFC-1398RS","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71NkAhA9e5L.jpg?v=1784405331"},{"product_id":"kenwood-kfc-1613mrb-6-5-marine-motorsports-speakers","title":"Kenwood KFC-1613MRB 6.5\" Marine\/Motorsports Speakers","description":"\u003cp\u003eThe Kenwood KFC-1613MRB is a pair of 6.5-inch 2-way coaxial speakers designed for marine and motorsports audio systems. It provides a practical upgrade for boats, ATVs, UTVs, golf carts, motorcycles, and other open-air installations where conventional car speakers may not be suitable. Its 4-ohm impedance allows connection to compatible marine receivers, powersports source units, or external amplifiers.\u003c\/p\u003e\u003cp\u003eThese speakers use a water-resistant polypropylene woofer cone and water-resistant balanced-dome tweeter to support outdoor listening in demanding environments. A rubber surround helps the woofer remain flexible and durable during regular use. The UV-resistant grille is intended to help protect the speaker assembly from sun exposure.\u003c\/p\u003e\u003cp\u003eThe KFC-1613MRB is rated for 30 watts RMS input power and 100 watts peak input power. Its 87 dB sensitivity and 60 Hz to 20 kHz frequency response make it suitable for clear full-range playback in compact outdoor audio systems. For best results, match the speakers with a clean, appropriately powered 4-ohm amplifier or receiver channel.\u003c\/p\u003e\u003cp\u003eIts coaxial 2-way design combines the woofer and tweeter into one round speaker assembly, simplifying installation where space is limited. The balanced-dome tweeter is mounted separately from the woofer cone, supporting high-frequency reproduction while maintaining the speaker's weather-resistant construction. This design is useful for replacing existing 6.5-inch marine or powersports speakers with a similar mounting format.\u003c\/p\u003e\u003cp\u003eThe pair is designed for flush mounting with a 5-inch cutout and a 2-5\/16-inch mounting depth. Stainless mounting hardware and speed clips are included for installation. Before purchasing, confirm available panel depth, cutout size, mounting-hole alignment, and the speaker color associated with the exact SKU being ordered.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Rating:\u003c\/strong\u003e Matches compatible low- to moderate-power audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Peak Input:\u003c\/strong\u003e Supports short musical peaks during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Drivers:\u003c\/strong\u003e Helps suit marine and motorsports applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Grille:\u003c\/strong\u003e Helps protect the visible speaker surface outdoors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many marine receivers and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1613MRB uses a water-resistant polypropylene cone, rubber surround, balanced-dome tweeter, and UV-resistant grille. These materials are selected for installations exposed to outdoor conditions, including sunlight and moisture. The fixed-grille coaxial layout keeps the tweeter integrated within the speaker assembly.\u003c\/p\u003e\u003cp\u003ePlan for a 5-inch cutout and at least 2-5\/16 inches of mounting depth behind the panel. Connect each speaker to a compatible amplifier or receiver output, observing positive and negative terminal polarity. The package includes twelve 4 x 25 mm mounting screws and twelve speed clips for installations that can use the supplied hardware.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141047366,"sku":"KFC-1613MRB","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51uzQ9X0KfS.jpg?v=1784405384"},{"product_id":"kenwood-kfc-1613mrw-6-5-marine-motorsports-speakers","title":"Kenwood KFC-1613MRW 6.5\" Marine\/Motorsports Speakers","description":"\u003cp\u003eThe Kenwood KFC-1613MRW is a pair of 6.5-inch, 2-way coaxial speakers made for marine and motorsports audio systems. It provides a practical replacement or upgrade for boats, ATVs, UTVs, golf carts, and similar applications where conventional interior car speakers may not be appropriate. The white grille version is designed to suit installations where a light-colored finish is preferred.\u003c\/p\u003e\u003cp\u003eThese speakers use a 4-ohm design that can be connected to a compatible marine receiver, Bluetooth amplifier, or aftermarket car audio amplifier. With a rated input power of 30 watts and 87 dB sensitivity, they are suited to moderate-power audio systems. Their 60 Hz to 20 kHz frequency response supports full-range playback with bass, vocals, and high-frequency detail from a compact coaxial speaker.\u003c\/p\u003e\u003cp\u003eA water-resistant polypropylene woofer cone and rubber surround help the KFC-1613MRW handle exposure to rain, splash, and outdoor conditions. The balanced-dome tweeter is also water resistant, providing integrated high-frequency reproduction without requiring separate tweeter mounting. UV-resistant grilles help protect the speaker face in sun-exposed installations.\u003c\/p\u003e\u003cp\u003eThe 2-way coaxial configuration places the tweeter within the woofer assembly, helping simplify installation where space is limited. This layout is useful for replacing existing 6.5-inch marine or powersports speakers while retaining a clean, flush-mounted appearance. The speaker pair uses fixed white grilles for a finished installation.\u003c\/p\u003e\u003cp\u003eFor system building, the KFC-1613MRW can be used with a compatible 4-ohm marine receiver or amplifier. Its 5-inch cutout requirement and shallow 2-5\/16-inch mounting depth should be checked against the mounting surface and available clearance before installation. The pair includes hardware for mounting, making it suitable for new installations or direct speaker replacement projects.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible marine, motorsports, and car audio amplifiers or receivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Cone:\u003c\/strong\u003e Polypropylene woofer construction is suited to exposed outdoor applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Supports cone movement while adding durability in changing conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Provides integrated high-frequency reproduction without a separate tweeter mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant White Grille:\u003c\/strong\u003e Helps protect the speaker face in sun-exposed installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1613MRW uses a water-resistant polypropylene cone, rubber surround, water-resistant balanced-dome tweeter, and UV-resistant fixed white grille. These materials are selected for marine and motorsports environments where speakers may encounter sun, moisture, splash, and dust. The coaxial layout keeps the speaker assembly compact while integrating low- and high-frequency drivers.\u003c\/p\u003e\u003cp\u003eConfirm a 5-inch cutout and at least 2-5\/16 inches of mounting clearance before cutting or mounting. Connect each speaker to a compatible 4-ohm speaker output, observe amplifier or receiver power limits, and use the included stainless-steel screws and speed clips where appropriate. For exposed installations, route and secure speaker wiring to reduce strain and protect connections from moisture.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141178438,"sku":"KFC-1613MRW","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51uzQ9X0KfS_7ede791f-f3af-44e9-85c5-4b2c11233a11.jpg?v=1784405439"},{"product_id":"kenwood-kfc-1633mrw-6-5-2-way-marine-speakers","title":"Kenwood KFC-1633MRW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1633MRW is a pair of 6.5-inch, 2-way marine speakers designed for boat and watercraft audio systems. They provide a practical replacement or upgrade path for worn, low-output, or non-marine-rated factory speakers. Their 4-ohm design allows connection to compatible marine receivers or external amplifiers.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want clear full-range music reproduction in open-air marine environments. A polypropylene woofer handles the main midrange and lower-frequency duties, while the balanced-dome tweeter supports upper-frequency detail. The result is a straightforward two-way speaker design for everyday on-water listening.\u003c\/p\u003e\u003cp\u003eThe KFC-1633MRW is rated for 20 watts RMS and 100 watts peak power per speaker. Its 84 dB sensitivity and 65 Hz to 20 kHz frequency response describe a speaker suited to moderate-power marine audio systems. Match amplification to the continuous RMS rating rather than the peak-power figure when planning a system.\u003c\/p\u003e\u003cp\u003eKenwood uses a water-resistant polypropylene cone woofer in this model to support use around splashing water and marine conditions. The speaker also uses a balanced-dome tweeter and a fixed white grille. These construction details make it appropriate for installations where exposed speaker locations are common.\u003c\/p\u003e\u003cp\u003eWith a 130 mm cutout requirement and 55.9 mm mounting depth, the KFC-1633MRW can fit many standard 6.5-inch speaker locations when mounting measurements are confirmed first. It can be used as a pair on its own or combined with additional marine speakers and a compatible amplifier. The included mounting hardware and installation template help support a clean installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Two-Way Design:\u003c\/strong\u003e Combines a woofer and tweeter in each speaker for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20W RMS Power:\u003c\/strong\u003e Supports continuous operation with appropriately matched marine audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Peak Power:\u003c\/strong\u003e Handles short musical peaks within its specified maximum rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Cone:\u003c\/strong\u003e Uses a polypropylene woofer cone suited to marine speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Adds high-frequency reproduction from a 1-inch tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm marine receiver or amplifier channels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1633MRW uses a 160 mm polypropylene cone woofer, a 25 mm balanced-dome tweeter, and a 227 g magnet. Each speaker is protected by a fixed white grille. The pair has a listed net weight of 1.2 kg with grilles.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth, cutout diameter, and screw-hole layout before installation. Kenwood specifies a 130 mm cutout, 55.9 mm mounting depth, and four 4 to 4.5 mm mounting holes per speaker. Connect each speaker to a compatible amplifier or receiver output with correct polarity, and use the supplied screws and speed clips where appropriate.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141211206,"sku":"KFC-1633MRW","price":97.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/510HZvT-PbS.jpg?v=1784405478"},{"product_id":"kenwood-kfc-1653mrw-6-5-2-way-marine-speakers","title":"Kenwood KFC-1653MRW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1653MRW is a pair of 6.5-inch, 2-way marine speakers made for flush-mount audio installations in boats, outdoor vehicles, and other moisture-prone environments. They provide a practical replacement or upgrade for worn factory speakers where conventional car-audio drivers may not be appropriate. The white finish is designed to complement common marine interiors and exterior panels.\u003c\/p\u003e\u003cp\u003eEach speaker combines a water-resistant polypropylene woofer cone with a 1-inch balanced-dome tweeter. This coaxial arrangement places the high-frequency driver within the woofer assembly, helping deliver full-range playback from a single mounting location. Its 60 Hz to 20 kHz frequency response covers bass, vocals, and treble for general-purpose marine listening.\u003c\/p\u003e\u003cp\u003eThe KFC-1653MRW is rated for 50 watts RMS and 150 watts peak power handling at 4 ohms. That makes it suitable for connection to a compatible marine receiver or a properly matched external amplifier. With 86 dB sensitivity at 1 meter, it is intended for systems that prioritize straightforward, balanced sound in open-air environments.\u003c\/p\u003e\u003cp\u003eKenwood uses a Santoprene surround, resin-mold basket, ferrite magnets, and a UV-resistant grille as part of the speaker construction. The polypropylene woofer cone is intended to better tolerate damp conditions than untreated paper-cone designs. A 25 mm PEI balanced-dome tweeter handles upper-frequency detail.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a marine or powersports audio upgrade that needs a conventional 6.5-inch speaker format. They can be used as a pair in cockpit panels, cabin locations, or compatible outdoor vehicle enclosures. Check available panel clearance, cutout size, mounting depth, and amplifier compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines woofer and tweeter performance in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant PP Woofer:\u003c\/strong\u003e Polypropylene cone supports use in damp outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Balanced-Dome Tweeter:\u003c\/strong\u003e Helps reproduce clear high-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Matches compatible marine receivers and modest amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Grille:\u003c\/strong\u003e Adds protection for exposed marine mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many compatible marine audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1653MRW uses a white resin-mold basket and grille, a water-resistant polypropylene woofer cone, and a Santoprene surround. Its woofer and tweeter use ferrite magnets, while the tweeter employs a PEI balanced-dome diaphragm. The system is designed for marine-quality use and for outdoor or moist conditions.\u003c\/p\u003e\u003cp\u003eVerify that the mounting surface accepts a 5-1\/8-inch cutout and provides at least 2-7\/16 inches of mounting depth. The package includes twelve 4 x 30 mm pan-head tapping screws and twelve speed nuts for mounting. Use compatible speaker wiring and a 4-ohm-rated marine receiver or amplifier, and keep wiring connections protected from moisture.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141276742,"sku":"KFC-1653MRW","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61gTt0DVMML.jpg?v=1784405519"},{"product_id":"kenwood-kfc-1666s-6-5-2-way-coaxial-speakers","title":"Kenwood KFC-1666S 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Kenwood KFC-1666S is a pair of 6.5-inch, 2-way coaxial car speakers designed as a practical replacement or upgrade for compatible factory speaker locations. Its 4-ohm design and 30-watt RMS rating suit many standard car-audio systems. The speakers combine a woofer and tweeter in each assembly for full-range playback from a compact mounting footprint.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers replacing worn, damaged, or limited factory door or rear-deck speakers. A 90 dB sensitivity rating helps them work efficiently with compatible factory radios or aftermarket head units. Their 40 Hz to 22 kHz frequency response covers bass, midrange, and high-frequency content within a single coaxial design.\u003c\/p\u003e\u003cp\u003eThe KFC-1666S uses a 160 mm polypropylene woofer diaphragm with a cloth surround. This construction is paired with Kenwood's Sound Field Enhancer and enlarged magnet circuit design. A 25 mm balanced-dome tweeter handles upper-frequency detail above the woofer.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 30 watts RMS input power and 300 watts peak input power. This makes the pair appropriate for modest-power speaker replacement systems and carefully matched amplification. For dependable operation, match the speakers with a compatible 4-ohm audio source and avoid exceeding their rated RMS power handling.\u003c\/p\u003e\u003cp\u003eWith a 4-7\/8-inch cutout requirement and 1-11\/16-inch mounting depth, the KFC-1666S can fit many vehicles that accept 6.5-inch speakers, subject to vehicle-specific clearance and mounting provisions. Grilles and installation hardware are supplied for custom or exposed installations. The speakers can be used as part of a basic factory-speaker refresh or alongside an upgraded receiver and properly matched amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30W RMS Power Handling:\u003c\/strong\u003e Supports compatible factory or modest aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Peak Power:\u003c\/strong\u003e Handles short musical peaks within rated operating conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer:\u003c\/strong\u003e Uses a PP diaphragm with a cloth surround.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced-Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction from a 1-inch driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Hardware:\u003c\/strong\u003e Includes grilles, screws, speed nuts, and speaker cords.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1666S features a silver polypropylene woofer diaphragm, cloth surround, ferrite woofer magnet, and silver balanced-dome tweeter with a neodymium magnet. Its shallow 5\/16-inch tweeter height and 1-11\/16-inch mounting depth are designed to support installation in a range of compatible locations. Grilles are included for added driver protection where appropriate.\u003c\/p\u003e\u003cp\u003eConfirm your vehicle's speaker opening, mounting depth, mounting-hole pattern, and panel clearance before installation. The specified cutout diameter is 4-7\/8 inches, while the speaker measures 6-5\/16 inches across without its grille. Use the supplied screws, speed nuts, and speaker cords as applicable, and connect to a compatible 4-ohm channel with power matched to the 30-watt RMS rating.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141342278,"sku":"KFC-1666S","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pL1rm9MnL.jpg?v=1784405553"},{"product_id":"kenwood-kfc-1673mrbl-6-5-rgb-marine-speakers","title":"Kenwood KFC-1673MRBL 6.5\" RGB Marine Speakers","description":"\u003cp\u003eThe Kenwood KFC-1673MRBL is a pair of 6.5-inch, 2-way coaxial marine and motorsports speakers with black grilles and integrated RGB illumination. It is designed for boat, UTV, ATV, and vehicle installations where conventional speakers may be exposed to moisture, sunlight, and outdoor conditions. The built-in lighting adds adjustable visual accenting without requiring separate illuminated speaker rings.\u003c\/p\u003e\u003cp\u003eThese speakers use a water-resistant polypropylene mica woofer cone and a 1\/2-inch PEI balanced-dome tweeter to cover bass, midrange, and treble from a single coaxial assembly. With a 65 Hz to 21 kHz frequency response and 86 dB sensitivity, they are suited to full-range outdoor audio systems. Each pair is rated for 75 watts RMS and 260 watts peak power handling.\u003c\/p\u003e\u003cp\u003eThe KFC-1673MRBL uses an RF wireless remote to control its RGB lighting system. It provides 21 selectable colors, 21 lighting modes, eight brightness steps, and seven speed steps for dynamic effects. The lighting system also includes a last-memory function that recalls its prior operating state after it is turned on.\u003c\/p\u003e\u003cp\u003eMarine-oriented construction includes IPX5 water resistance for the mounted speaker, UV-resistant grilles and cone, a rubber surround, a rubber frame cushion, and stainless-steel mounting hardware. The speaker basket is resin-molded ABS, while the woofer uses a ferrite magnet and the tweeter uses a neodymium magnet. A water-resistant cushion helps reduce water intrusion from the rear side of the woofer.\u003c\/p\u003e\u003cp\u003eThe speakers can be used as a direct replacement where a compatible 6.5-inch mounting location is available, or as part of a new marine or powersports audio system. Their 4-ohm impedance makes them compatible with appropriately matched 4-ohm speaker outputs or amplifier channels. Up to six pairs can be linked and synchronized for coordinated RGB lighting across a larger installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Adjust 21 colors and 21 lighting modes with the included RF remote.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports amplifier or receiver power matched to 75 watts RMS per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Helps the mounted speakers withstand water exposure in marine-oriented installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 1\/2-inch balanced-dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Components:\u003c\/strong\u003e UV-resistant grille and cone support outdoor installation use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinkable Lighting System:\u003c\/strong\u003e Synchronizes RGB illumination across up to six speaker pairs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-1673MRBL features black fixed grilles, a resin-molded ABS basket, a PP mica woofer cone, rubber surround, and a PEI balanced-dome tweeter. Its hardware includes SUS304 stainless-steel screws and mounting clips, while the LED circuit board has a water-resistant coating. The tweeter is integrated into the grille assembly rather than mounted on a pole piece through the woofer cone.\u003c\/p\u003e\u003cp\u003eVerify a 5-11\/16-inch circular cutout and at least 2-9\/16 inches of mounting depth before installation. Speaker wire is not included; Kenwood recommends 12-22 AWG speaker wire terminated with female spade connectors. The RGB controller requires a 12V DC boat or vehicle electrical system, and a 3A fuse is required when its positive lead is connected directly to the battery.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633141571654,"sku":"KFC-1673MRBL","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71oEEuETlPL.jpg?v=1784405596"}],"url":"https:\/\/audiowatt.store\/collections\/kenwood.oembed?page=2","provider":"Audio Watt Store","version":"1.0","type":"link"}