{"title":"Deals","description":null,"products":[{"product_id":"soundxtreme-st-503-5-25-3-way-coaxial-speakers","title":"SoundXtreme ST-503 5.25\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe SoundXtreme ST-503 is a pair of 5.25-inch, 3-way coaxial car speakers intended as a replacement for factory-installed speakers. It provides a compact option for vehicles that use 5.25-inch speaker locations. The full-range coaxial layout keeps the woofer and high-frequency drivers together in each speaker assembly.\u003c\/p\u003e\u003cp\u003eThis set is suited to listeners looking to refresh an aging factory speaker system or build a basic replacement system around a compatible head unit or amplifier. Its 4-ohm impedance is the common nominal load used by many car-audio systems. Confirm the vehicle's opening size, mounting depth, and connector arrangement before ordering.\u003c\/p\u003e\u003cp\u003eThe ST-503 uses a 3-way design, combining a woofer section with integrated midrange and high-frequency reproduction. This arrangement is designed to cover a broad portion of the audible range from each mounting location. The published frequency response is 100 Hz to 20 kHz, so low bass below that range is better handled by a dedicated subwoofer when deeper bass is desired.\u003c\/p\u003e\u003cp\u003eA polypropylene mid-woofer cone and PEI dome tweeter are specified for the speaker system. The listed 20 mm voice coil and 5.3-ounce magnet are part of its compact coaxial construction. With an 88 dB sensitivity rating, output will depend on the source unit or amplifier power, installation quality, and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eRated for 320 watts peak power, the ST-503 is intended for everyday replacement-speaker use rather than as a standalone bass solution. It can be used with a factory radio or an aftermarket system that is compatible with 4-ohm speakers. For a balanced upgrade, pair it with clean amplification and properly fitted mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch Size:\u003c\/strong\u003e Fits applications designed for compact round speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Integrates multiple driver elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports common factory and aftermarket car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Peak Rating:\u003c\/strong\u003e Provides the published peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Mounting Depth:\u003c\/strong\u003e Helps with fitment planning behind the mounting surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST-503 uses a polypropylene mid-woofer cone, PEI dome tweeter, 20 mm voice coil, and 5.3-ounce magnet. Its full-range 3-way coaxial construction combines the driver elements in a single round speaker assembly. The listed outside diameter is 5.25 inches.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle accepts a 5.25-inch round speaker and has at least 2.5 inches of mounting clearance before installation. Verify factory mounting-hole alignment, terminal connection type, and any required adapters separately, as fitment hardware is vehicle-specific. Use two matching speakers as a left\/right pair and observe correct positive and negative polarity when wiring.\u003c\/p\u003e","brand":"SoundXtreme","offers":[{"title":"Default Title","offer_id":45613243301958,"sku":"ST-503","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81OXZUIcUdL.jpg?v=1784350558"},{"product_id":"gravity-gr-hl4-4-channel-high-to-low-rca-line-converter","title":"Gravity GR-HL4 4-Channel High-to-Low RCA Line Converter","description":"\u003cp\u003eThe Gravity GR-HL4 is a four-channel line output converter for adding an aftermarket amplifier to a vehicle audio system that does not provide RCA preamp outputs. It accepts speaker-level audio from a factory or aftermarket radio and converts it to low-level RCA signal. This allows an amplifier to be connected while retaining the existing head unit.\u003c\/p\u003e\u003cp\u003eThis converter is intended for installers and vehicle owners upgrading factory audio systems with amplified speakers, an external amplifier, or a subwoofer amplifier. Its four-channel design supports connection from multiple speaker outputs rather than limiting the system to a single stereo pair. RCA outputs provide a conventional signal connection for compatible aftermarket amplifiers.\u003c\/p\u003e\u003cp\u003eThe GR-HL4 is designed to provide a controlled signal handoff between a radio's speaker wiring and an amplifier's RCA inputs. Adjustable input signal sensitivity helps match the converter's output level to the connected amplifier. Proper level adjustment can help create a balanced system setup without unnecessarily overdriving the amplifier input.\u003c\/p\u003e\u003cp\u003eA built-in 12-volt remote turn-on output is included for amplifier activation in installations where the radio may not provide a dedicated remote lead. The converter also incorporates a ground loop isolator intended to help reduce unwanted electrical noise in the audio signal path. These integrated functions can reduce the number of separate interface components needed for a basic amplifier integration.\u003c\/p\u003e\u003cp\u003eThe compact GR-HL4 is suited to installations where a factory radio is being retained and an amplifier is added downstream. It operates from a 12-volt negative-ground vehicle electrical system and accepts up to 100 watts of input per channel. Use it as part of a properly fused amplifier installation with suitable RCA cables, speaker-wire connections, and amplifier power wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Conversion:\u003c\/strong\u003e Converts four speaker-level channels to RCA-level audio outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Line Outputs:\u003c\/strong\u003e Connects compatible aftermarket amplifiers using standard RCA signal cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Sensitivity:\u003c\/strong\u003e Lets the installer set signal level for the connected amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Turn-On Output:\u003c\/strong\u003e Provides a 12-volt trigger output for amplifier activation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Loop Isolator:\u003c\/strong\u003e Helps reduce electrical noise transferred through the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Frequency Response:\u003c\/strong\u003e Supports audio signals from 10 Hz to 50 kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-HL4 uses a compact enclosed design intended for integration into vehicle audio wiring. Its RCA interface, level adjustment control, and integrated remote-output function place the primary connection and setup functions in one converter module. The design is made for negative-ground automotive electrical systems operating between 11 and 15 volts DC.\u003c\/p\u003e\u003cp\u003eInstall the converter between the radio's speaker-level outputs and the RCA inputs of a compatible amplifier, following the wiring diagram supplied on the package. Connect the amplifier's remote terminal to the converter's remote turn-on output when applicable, then set input sensitivity conservatively before final system tuning. Confirm speaker-wire polarity, secure all wiring, and keep signal wiring routed appropriately for the vehicle installation.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45613358579782,"sku":"GR-HL4","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71umOhE1FzL.jpg?v=1784350611"},{"product_id":"audio360-ad1500us-10-powered-under-seat-subwoofer","title":"Audio360 AD1500US 10\" Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe AUDIO360 AD1500US is a compact powered subwoofer system designed to add low-frequency output to vehicle audio systems without requiring a separate subwoofer enclosure and external amplifier. Its integrated 10-inch, 4-ohm woofer and built-in amplifier are housed in a shallow enclosure intended for under-seat or limited-space installations. It is a practical option for drivers who want more bass while preserving usable cargo and cabin space.\u003c\/p\u003e\u003cp\u003eRated for up to 1500 watts of peak power, the AD1500US is intended to provide added bass impact for factory and aftermarket sound systems. Its published frequency response is 55Hz to 20kHz, with a signal-to-noise ratio above 90dB and total harmonic distortion below 0.4%. These specifications support a clean, controlled addition of low-end reinforcement when the system is set up correctly.\u003c\/p\u003e\u003cp\u003eAn adjustable low-pass filter from 50Hz to 150Hz lets the subwoofer be matched to the frequency range handled by the vehicle's main speakers. This allows the installer to set the handoff point according to the speakers, source unit, and listening preference. A 20Hz subsonic filter is also specified to limit very low frequencies outside the intended operating range.\u003c\/p\u003e\u003cp\u003eThe AD1500US includes variable bass boost adjustment from 0 to +24dB for tailoring bass emphasis. High-level and low-level input options support integration with either factory speaker-output signals or aftermarket receiver preamp signals. Published input sensitivity is 0.9V for high-level input and 300mV for low-level input.\u003c\/p\u003e\u003cp\u003eAt 345 x 262 x 68mm, the enclosure is built for installations where conventional subwoofer boxes are impractical. The slim 68mm profile can suit many under-seat and shallow cargo-area locations, subject to vehicle clearance and safe mounting access. Integrated circuit protection and a 25A fuse are specified to help protect the powered subwoofer during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Woofer:\u003c\/strong\u003e Combines a 10-inch 4-ohm woofer and built-in amplifier in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Peak Rating:\u003c\/strong\u003e Provides a published maximum peak-power rating for added bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Offers 50Hz to 150Hz tuning for blending with full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Adjusts bass emphasis from 0 to +24dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Compatibility:\u003c\/strong\u003e Supports high-level and low-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Enclosure:\u003c\/strong\u003e Measures 68mm deep for space-conscious vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD1500US uses an all-in-one powered-subwoofer enclosure design, combining the woofer and amplifier in a compact 345 x 262 x 68mm housing. The published information confirms integrated circuit protection and a 25A fuse, but does not identify the enclosure, cone, or surround materials. Its shallow form factor is designed for applications with restricted mounting depth.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a location with adequate clearance, ventilation, and protection from cargo or passenger contact. Use the supplied power and signal wiring harness as applicable, choose high-level input for speaker-output signals or low-level input for receiver preamp signals, and set the low-pass filter and bass boost conservatively before final tuning. Confirm under-seat clearance, wiring routes, and vehicle electrical requirements before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613491093574,"sku":"AD1500US","price":183.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71W8-sfWDzL.jpg?v=1784350681"},{"product_id":"audiobank-ad1600-4-4-channel-car-audio-amplifier","title":"Audio360 AD1600.4 4-Channel Car Audio Amplifier","description":"\u003cp\u003eThe Audio360 AD1600.4 is a four-channel car audio amplifier designed to add externally amplified power to a vehicle speaker system. It can drive front and rear speakers in a conventional four-channel layout or support two bridged output channels for higher-power applications. This makes it suitable for factory-system upgrades and custom audio installations that need flexible channel configuration.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the amplifier is rated for 60 watts RMS per channel, while its 2-ohm stereo rating is 90 watts RMS per channel. When bridged into 4-ohm loads, it is rated for 180 watts RMS across two channels. These ratings allow the amplifier to be matched with a range of full-range speakers or appropriately configured bridged speaker loads.\u003c\/p\u003e\u003cp\u003eThe AD1600.4 uses a Class AB amplifier design intended for full-range audio reproduction. Its listed 90 dB signal-to-noise ratio supports a low-noise signal path when the system is properly installed and gain-matched. Separate front and rear gain controls allow the input level to be adjusted for the source unit and system layout.\u003c\/p\u003e\u003cp\u003eFor system tuning, each channel pair provides selectable high-pass, low-pass, or full-range crossover operation. This lets installers high-pass smaller door speakers, run full-range speakers without filtering, or use low-pass filtering in a bridged setup where appropriate. RCA inputs for front and rear channels and RCA pass-through outputs support integration with compatible head units and additional amplifiers.\u003c\/p\u003e\u003cp\u003eThe compact chassis measures approximately 11.81 x 8.98 x 2.01 inches, helping it fit in locations with limited mounting space. Dual 25A onboard fuses and power\/protection status indicators support everyday system monitoring. The amplifier is a practical option for users building a four-speaker system or combining amplified speakers with a two-channel bridged configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Powers up to four speakers from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Configuration:\u003c\/strong\u003e Combines channel pairs for two higher-power 4-ohm outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB Circuitry:\u003c\/strong\u003e Provides full-range amplification for speaker-system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Crossovers:\u003c\/strong\u003e Offers HPF, LPF, and full-range modes per channel pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Signal Connections:\u003c\/strong\u003e Includes separate front\/rear inputs and pass-through outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 25A Fuses:\u003c\/strong\u003e Provides onboard overcurrent protection for the amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD1600.4 has a compact aluminum-alloy housing with power, ground, remote, and speaker terminals grouped on one end of the chassis. Its input\/control side includes RCA connections, front and rear gain controls, crossover-mode switches, crossover-frequency controls, and power\/protection LEDs. The listed mounting type is freestanding, and mounting hardware is included according to the available product manual.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a dry, ventilated location away from heat, moisture, and direct sunlight. Use appropriately sized power, ground, remote, RCA, and speaker wiring; available installation guidance generally recommends 8-gauge power and ground wire, with an externally mounted 50A inline fuse near the battery. Connect 4-ohm speakers for bridged operation, set gain from minimum during initial setup, and use the crossover settings to match the speakers connected to each channel pair.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613549060166,"sku":"AD1600-4","price":123.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81hQzROV4aL.jpg?v=1784350709"},{"product_id":"audiobank-ad2500-5-5-channel-car-audio-amplifier","title":"Audio360 AD2500.5 5-Channel Car Audio Amplifier","description":"\u003cp\u003eThe Audio360 AD2500-5 is a 5-channel car audio amplifier designed to power a full vehicle system from one compact chassis. It combines four speaker channels with a dedicated subwoofer channel, making it suited to front and rear speakers plus bass reinforcement. This layout can simplify an upgrade compared with using separate multi-channel and mono amplifiers.\u003c\/p\u003e\u003cp\u003eRated output is 60W RMS x 4 plus 180W RMS x 1 at 4 ohms, or 90W RMS x 4 plus 250W RMS x 1 at 2 ohms. These ratings give installers a defined power target when matching compatible speakers and a subwoofer. The listed 90dB signal-to-noise ratio supports a clean signal path for everyday listening systems.\u003c\/p\u003e\u003cp\u003eThe amplifier uses Class AB amplification for the speaker channels and Class D amplification for the subwoofer channel. This hybrid approach is intended to serve full-range speakers and bass duties in the same amplifier. It is a practical choice for vehicle owners building a coordinated five-channel system.\u003c\/p\u003e\u003cp\u003eFor system flexibility, the rear channels are listed as bridgeable. The published bridged configuration is 180W RMS x 2 plus 250W RMS x 1 for the subwoofer channel. This provides an alternate setup path where additional power is needed for compatible component speakers or subwoofer applications.\u003c\/p\u003e\u003cp\u003eThe AD2500-5 is listed at approximately 14.57 x 8.98 x 2.13 inches, helping it fit in locations where amplifier space is limited. Triple 30A fuses and thermal, short-circuit, and overload protection are specified for electrical protection. Proper power wiring, grounding, ventilation, and speaker-load matching remain important for a reliable installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four speaker channels and a dedicated subwoofer channel from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid AB+D Design:\u003c\/strong\u003e Uses Class AB speaker channels and a Class D subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm RMS Output:\u003c\/strong\u003e Delivers 60W x 4 plus 180W x 1 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm RMS Output:\u003c\/strong\u003e Delivers 90W x 4 plus 250W x 1 at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Rear Channels:\u003c\/strong\u003e Supports a listed 180W RMS x 2 bridged configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Includes thermal, short-circuit, and overload protection with triple 30A fuses.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD2500-5 uses a compact amplifier chassis measuring approximately 14.57 x 8.98 x 2.13 inches. Its available product information identifies a Class AB+D circuit arrangement and three onboard 30A fuses. Enclosure materials and finish details are not specified in the confirmed product information.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry, ventilated location with clearance for wiring and heat dissipation. Match speakers and the subwoofer to the stated 2-ohm or 4-ohm operating ratings, and follow the listed bridged configuration only with compatible loads. A suitable power, ground, fuse, signal, and speaker wiring setup is required; included wiring accessories are not confirmed.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613656637510,"sku":"AD2500-5","price":220.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71MvxzxGPqL.jpg?v=1784350760"},{"product_id":"audiobank-audio360-ad3000-1-monoblock-car-amplifier","title":"Audio360 AD3000.1 Monoblock Car Amplifier","description":"\u003cp\u003eThe AUDIO360 AD3000.1 is a compact monoblock car amplifier designed to add dedicated low-frequency power to a subwoofer system. Its single-channel Class D configuration is intended for bass amplification rather than full-range speaker duty. It is a practical option for installers building a compact trunk, side-panel, or under-seat subwoofer upgrade.\u003c\/p\u003e\u003cp\u003eThis amplifier is rated for 200 watts RMS at 4 ohms, 350 watts RMS at 2 ohms, and 500 watts RMS at 1 ohm. Those ratings allow it to work with subwoofer wiring configurations that present a 1-, 2-, or 4-ohm final load. Matching the final impedance and RMS capability of the connected subwoofer is important for a properly balanced system.\u003c\/p\u003e\u003cp\u003eThe AD3000.1 is listed with a 3000-watt maximum-power rating and an 89 dB signal-to-noise ratio. Its published continuous-output ratings provide the more useful reference point when selecting compatible subwoofers. The mono design keeps the amplifier focused on supplying power to one bass channel.\u003c\/p\u003e\u003cp\u003eClass D operation helps keep the amplifier footprint compact at approximately 8.66 x 8.98 x 2.13 inches. This format can simplify placement where a larger traditional amplifier may be difficult to mount. The amplifier is specified as stable down to a 1-ohm load.\u003c\/p\u003e\u003cp\u003eBuilt-in thermal, overload, and short-circuit protection are listed for added operating protection. These features are intended to help safeguard the amplifier during abnormal operating conditions. The AD3000.1 can serve as the bass-power stage in a system paired with a compatible source unit, wiring installation, and properly matched subwoofer enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Subwoofer Channel:\u003c\/strong\u003e Dedicated single-channel design for low-frequency system amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Topology:\u003c\/strong\u003e Compact amplifier architecture suited to space-conscious installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stability:\u003c\/strong\u003e Supports compatible subwoofer loads down to 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS at 1 Ohm:\u003c\/strong\u003e Delivers its highest listed RMS rating at 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e89 dB Signal-to-Noise Ratio:\u003c\/strong\u003e Published noise specification for the amplifier's audio output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuits:\u003c\/strong\u003e Thermal, overload, and short-circuit safeguards are listed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD3000.1 uses a compact Class D monoblock layout measuring approximately 8.66 x 8.98 x 2.13 inches. Published product information confirms the amplifier format, dimensions, and protection functions, but does not identify the chassis or heatsink materials. Its small form factor is suited to installations where amplifier space is limited.\u003c\/p\u003e\u003cp\u003eInstall the amplifier securely in a location with suitable ventilation and plan the system around the final subwoofer impedance. Use a subwoofer configuration that presents no lower than the specified 1-ohm minimum load, and match the subwoofer system to the applicable 4-, 2-, or 1-ohm RMS rating. Power wiring, grounding, signal connection, fusing, and any installation hardware should be selected according to the vehicle and the installer’s requirements.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613714538566,"sku":"AD3000-1","price":145.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71aqPBmdrzL.jpg?v=1784350783"},{"product_id":"audio360-ad48tw-5-49-super-tweeter","title":"Audio360 AD48TW 5.49\" Super Tweeter","description":"\u003cp\u003eThe Audio360 AD48TW is a high-frequency super tweeter designed to add upper-range detail to a car or marine audio system. It is intended for listeners building systems that need dedicated treble reproduction beyond what larger speakers or subwoofers provide. The requested configuration includes two AD48TW tweeters for left- and right-channel use.\u003c\/p\u003e\u003cp\u003eEach AD48TW is rated at 4 ohms and listed with 2,500 watts maximum power handling, for 5,000 watts total maximum handling across the pair. Its 107 dB sensitivity rating indicates efficient output from comparatively modest amplifier power. The stated 2 kHz to 20 kHz frequency range focuses the driver on upper-midrange and high-frequency duties.\u003c\/p\u003e\u003cp\u003eA phenolic diaphragm is used for the sound-producing element, while the voice coil uses CCAW construction. These materials are part of the driver design specified for this model. A 15.2-ounce magnet is also listed for each tweeter.\u003c\/p\u003e\u003cp\u003eThe AD48TW is suited to systems using separate low-, mid-, and high-frequency drivers rather than as a replacement for a full-range speaker. It can complement midrange speakers and subwoofers by handling the upper portion of the audible frequency range. Its wired connection format makes it appropriate for conventional amplified car-audio speaker wiring.\u003c\/p\u003e\u003cp\u003eThis model is listed for car and marine audio applications, giving installers flexibility when selecting a high-frequency driver for a vehicle or boat system. Proper system matching remains important because the 4-ohm load must be compatible with the amplifier channel and crossover arrangement. The product is listed as a super tweeter, so it should be integrated as part of a multi-driver system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Tweeter Design:\u003c\/strong\u003e Adds dedicated high-frequency output to a multi-speaker audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifier channels designed for 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e107 dB Sensitivity:\u003c\/strong\u003e Supports efficient high-frequency output with appropriate system power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 kHz–20 kHz Response:\u003c\/strong\u003e Covers upper-midrange and treble frequencies specified for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhenolic Diaphragm:\u003c\/strong\u003e Uses the specified phenolic material for the diaphragm assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD48TW uses a phenolic diaphragm, CCAW voice coil, and a listed 15.2-ounce magnet. Its published overall size is 5.49 by 4.72 inches, placing it in the large-format super-tweeter category. The model is specified as a wired dynamic-driver tweeter for automotive and marine-oriented audio applications.\u003c\/p\u003e\u003cp\u003eMount the pair where their high-frequency output can be directed toward the listening area and where the 5.49 by 4.72-inch footprint can be accommodated. Connect each tweeter to an amplifier or speaker circuit compatible with a 4-ohm load, and use an appropriate crossover or high-pass arrangement so the driver operates within its listed 2 kHz to 20 kHz frequency range. Confirm available mounting clearance and system wiring before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613945684038,"sku":"AD48TW","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61FX_9_-5SL.jpg?v=1784350890"},{"product_id":"audio360-ad6510p-6-5-4-way-coaxial-car-speakers","title":"Audio360 AD6510P 6.5\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Audio360 AD6510P is a 6.5-inch 4-way coaxial car speaker designed for vehicle audio upgrades where space and straightforward fitment matter. Its compact format is suited to many door-panel, rear-deck, and custom speaker locations that accept a 6.5-inch driver. It is intended for listeners who want to replace factory speakers or build out an aftermarket sound system.\u003c\/p\u003e\u003cp\u003eThis model combines a 4-way coaxial layout with a 4-ohm nominal impedance for use with compatible aftermarket head units and amplifiers. The 92 dB sensitivity rating supports efficient output from modest-power sources while remaining suitable for amplified systems. Its sound character is aimed at strong midbass presence and clear everyday playback.\u003c\/p\u003e\u003cp\u003eThe AD6510P is rated at 650 watts maximum power and 325 watts RMS per speaker. These published ratings make proper amplifier gain setting especially important for reliable operation. Match the system carefully and avoid driving the speakers into audible distortion.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber edge form the core of the speaker's woofer assembly. This material combination is designed to provide a durable moving surface while helping control cone movement. The coaxial construction keeps the multi-driver arrangement in a single speaker location, which can simplify an upgrade where separate tweeter mounting is not planned.\u003c\/p\u003e\u003cp\u003eWith a stated 2.76-inch mounting depth and 5.63-inch cutout diameter, the AD6510P can be considered for installations with limited rear clearance. Verify the vehicle's factory opening, available depth, mounting-hole pattern, and window or mechanism clearance before purchase. It can serve as part of a front- or rear-speaker upgrade when paired with compatible wiring and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits many common vehicle speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Design:\u003c\/strong\u003e Combines multiple drivers into one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides published headroom for compatible amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Helps guide amplifier matching and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output with compatible source power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket head units and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6510P uses an injection-molded cone with a rubber edge for a durable speaker assembly. Its 4-way coaxial design places the speaker elements together in a compact footprint. This makes it practical for installations that do not have separate locations for dedicated tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle supports a 5.63-inch cutout and at least 2.76 inches of mounting depth before installation. Use appropriate vehicle-specific brackets or adapters when required, and check clearance behind the speaker before fastening it in place. For amplified use, set gains conservatively and use compatible 4-ohm-capable equipment.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614092386374,"sku":"AD6510P","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FgnYTL49L.jpg?v=1784358286"},{"product_id":"audio360-ad6915p-6x9-4-way-coaxial-car-speakers","title":"AUDIO360 AD6915P 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe AUDIO360 AD6915P is a 6x9-inch 4-way coaxial car speaker designed for factory-location upgrades in vehicles with compatible 6x9 mounting positions. It provides an all-in-one speaker configuration for replacing worn or underperforming door or rear-deck speakers. Its 4-ohm design supports use with many aftermarket head units and amplifiers.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want fuller output and stronger midbass from a factory-sized speaker location. The stated 92 dB sensitivity helps it produce substantial output from available amplifier power. It is suited to everyday listening systems as well as custom car-audio installations using 6x9 speaker locations.\u003c\/p\u003e\u003cp\u003eThe AD6915P is rated at 1000 watts maximum power and 500 watts RMS. Proper power matching remains important, so amplifier output and gain settings should be selected carefully for the speaker system. A compatible amplifier can help provide controlled output when higher volume is desired.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber surround form the speaker's primary moving assembly. This construction is intended to support cone control and durability during regular vehicle use. The coaxial layout places multiple drivers within the 6x9 speaker format for broad sound coverage from a single mounting location.\u003c\/p\u003e\u003cp\u003eWith a 3.54-inch mounting depth and an 8.58 x 5.87-inch cutout requirement, the AD6915P should be measured against the vehicle's available space before purchase. It can be used in compatible doors, rear decks, or custom panels. Vehicle-specific mounting adapters, wiring harnesses, or hardware may be needed depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible factory-size speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides stated high-output power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket radios and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6915P uses an injection-molded cone with a rubber surround. These materials are specified to support cone control and long-term durability. Its 4-way coaxial construction consolidates the speaker elements into a single 6x9-inch assembly.\u003c\/p\u003e\u003cp\u003eConfirm both the 3.54-inch mounting depth and 8.58 x 5.87-inch cutout dimensions against the intended location before installation. Use vehicle-appropriate brackets, wiring adapters, and mounting hardware where required; their inclusion is not confirmed. For amplified systems, match the amplifier configuration to the 4-ohm speaker load and set gains conservatively.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614093959238,"sku":"AD6915P","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81C2zDpDq9L.jpg?v=1784358325"},{"product_id":"audio360-ad7500b-digital-bass-processor","title":"Audio360 AD7500B Digital Bass Processor","description":"\u003cp\u003eThe Audio360 AD7500B is an in-line digital bass processor for car audio systems that need more low-frequency detail and adjustability. It is designed to process a line-level signal before it reaches downstream crossovers, equalizers, or amplifiers. This makes it a practical addition for systems using RCA-connected source units and aftermarket amplification.\u003c\/p\u003e\u003cp\u003eRather than functioning as a conventional bass boost control alone, the AD7500B uses a dedicated digital bass driver circuit intended to restore low-frequency information in the program material. The result is a bass presentation that can be tailored for the vehicle, subwoofer system, and listening preferences. It is suited to listeners who want more control over bass character without replacing the rest of their audio system.\u003c\/p\u003e\u003cp\u003eA SWEEP control selects the bass center frequency from 27Hz to 63Hz, allowing adjustment toward deeper sub-bass or higher-impact bass frequencies. A separate WIDE control changes the range of frequencies affected by the processing. Together, these controls allow more targeted tuning than a single fixed-frequency bass control.\u003c\/p\u003e\u003cp\u003eThe AD7500B is specified with a 10Hz to 35kHz frequency response, a 133dB signal-to-noise ratio, and 0.0025% total harmonic distortion. Its balanced RCA inputs are rated to accept up to 15V RMS and provide more than 62dB of noise rejection. These specifications support integration with higher-output aftermarket source and signal-processing equipment while helping reduce unwanted electrical noise.\u003c\/p\u003e\u003cp\u003eA dash-mount remote is included for convenient adjustment from the driver's seat, with an LED indicator for status visibility. The processor also includes a PFM subsonic filter switch to reduce very low-frequency content below the useful range of a subwoofer system. Powered by 12V DC and rated for a 150mA current draw, it is intended for permanent vehicle-audio installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Processing:\u003c\/strong\u003e Restores and shapes low-frequency content in the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e27Hz–63Hz Sweep:\u003c\/strong\u003e Select the bass center frequency for system-specific tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Control:\u003c\/strong\u003e Adjust the frequency range affected by processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Supports up to 15V RMS input signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Adjust bass output conveniently from the driver's seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Filter Switch:\u003c\/strong\u003e Reduces unnecessary ultra-low-frequency signal content.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD7500B uses a dedicated bass-processing layout with two rotary tuning controls, balanced RCA inputs, RCA outputs, and a separate dash-mount remote control. Its published specifications do not identify the enclosure material or exact chassis dimensions. The control arrangement is focused on direct adjustment of bass frequency, processing width, and output level.\u003c\/p\u003e\u003cp\u003eInstall the AD7500B in the RCA signal chain before downstream crossovers, equalizers, or amplifiers. Connect a compatible line-level source to its balanced RCA inputs, route the RCA outputs to the next audio component, and supply 12V DC power. Use the remote in an accessible dash location, then set the SWEEP, WIDE, remote level, and PFM filter according to the subwoofer system's usable low-frequency range.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614095335494,"sku":"AD7500B","price":56.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Lni9rHCjL.jpg?v=1784358360"},{"product_id":"audio360-ads1040-shallow-10-shallow-mount-car-subwoofer","title":"AUDIO360 ADS1040-SHALLOW 10\" Shallow-Mount Car Subwoofer","description":"\u003cp\u003eThe AUDIO360 ADS1040-SHALLOW is a 10-inch shallow-mount car subwoofer designed for vehicle audio systems with limited installation depth. Its low-profile form factor helps make bass upgrades practical in trucks, compact vehicles, under-seat locations, and custom enclosures where a conventional deep subwoofer may not fit. The driver uses a 4-ohm configuration for integration with compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eRated for 600 watts RMS and 1,200 watts maximum power, the ADS1040 is intended for systems that need substantial low-frequency output from a compact driver. Its shallow design focuses on installation flexibility without changing the basic role of a dedicated subwoofer in a car audio system. Proper amplifier gain setting and enclosure construction remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe subwoofer has a 3.62-inch mounting depth, providing a space-conscious option for builds with restricted rear clearance. A 9.25-inch cutout diameter is specified for enclosure planning and fitment. These dimensions should be checked against the available mounting surface, enclosure depth, and clearance behind the speaker before installation.\u003c\/p\u003e\u003cp\u003eAUDIO360 specifies a rigid, low-profile cone for the ADS1040. This construction is intended to support controlled bass reproduction while fitting the shallow-mount format. The available product information does not identify the cone's exact material composition, voice-coil details, magnet specifications, or frequency-response measurements.\u003c\/p\u003e\u003cp\u003eThe ADS1040 can be used in either sealed or ported enclosure designs according to the available listing information. A sealed enclosure may suit listeners seeking a compact installation, while a ported design can be selected when the enclosure is engineered for the subwoofer and the available space. Pair it with a compatible 4-ohm amplifier setup and an enclosure designed with the specified mounting dimensions in mind.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow-Mount Design:\u003c\/strong\u003e Provides subwoofer capability for installations with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W Maximum Power:\u003c\/strong\u003e States the product's listed peak power-handling rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports connection with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.62-Inch Mounting Depth:\u003c\/strong\u003e Helps accommodate compact and space-restricted enclosure locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Allows enclosure selection based on installation goals and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1040 uses a rigid low-profile cone and a shallow-mount driver layout. This design is intended to reduce mounting-depth requirements while retaining a dedicated 10-inch woofer format. Exact material composition, magnet data, voice-coil specifications, and included mounting hardware are not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003ePlan the enclosure around the specified 9.25-inch cutout diameter and allow at least 3.62 inches of mounting depth, plus practical clearance for terminals and wiring. Verify physical clearance in the intended truck, under-seat, or custom location before cutting a panel. Use a compatible 4-ohm amplifier configuration and follow the amplifier and enclosure manufacturer's wiring and setup guidance.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614097924166,"sku":"ADS1040-SHALLOW","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61AZcUDJSNL.jpg?v=1784358434"},{"product_id":"audiobank-ab-ap14-1-2-din-digital-bass-processor","title":"Audiobank AB-AP14 1\/2 DIN Digital Bass Processor","description":"\u003cp\u003eThe Audiobank AB-AP14 is a compact 1\/2 DIN bass processor designed to give a car audio system more adjustable low-frequency control. It sits between a source unit and amplifier, allowing the bass signal to be shaped before it reaches the subwoofer amplifier. It is intended for systems where the listener wants more control than a head unit’s basic bass setting can provide.\u003c\/p\u003e\u003cp\u003eThis processor combines bass maximization and sound-restoration functions with adjustable bass level, sweep frequency, and width controls. The sweep control lets the installer target the low-frequency area being emphasized, while the width control changes how broad that enhancement is. These adjustments support system-specific tuning rather than relying on a fixed bass boost.\u003c\/p\u003e\u003cp\u003eThe AB-AP14 includes a PFM subsonic filter switch to help manage very low-frequency content in the signal path. Its bass maximizer indicator provides a visual operating reference while adjustments are being made. A power indicator is also provided to show when the processor is receiving power.\u003c\/p\u003e\u003cp\u003eA dash-mount remote control allows convenient adjustment of processed bass level from the driver’s seat. This is useful when different recordings or listening levels call for a change in subwoofer output. The remote connects to the main processor through its dedicated dash-remote connection.\u003c\/p\u003e\u003cp\u003eWith stereo RCA inputs and RCA outputs, the AB-AP14 is suited to aftermarket systems using low-level RCA signal connections. It can be used with a compatible head unit or signal source and a separate amplifier driving subwoofers. Professional installation is recommended to ensure correct power, ground, turn-on, RCA routing, and gain setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Processing:\u003c\/strong\u003e Shapes low-frequency content before it reaches the amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Sweep:\u003c\/strong\u003e Selects the bass frequency area to emphasize.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Control:\u003c\/strong\u003e Adjusts the bandwidth of the bass effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides convenient in-cabin bass-level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Filter Switch:\u003c\/strong\u003e Helps manage ultra-low-frequency signal content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Signal Connections:\u003c\/strong\u003e Integrates with compatible aftermarket audio components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AB-AP14 uses a compact 1\/2 DIN processor format for integration into custom car-audio installations. Its control layout includes WIDE, SWEEP, and BASS CONTROL adjustments, along with illuminated status indication. The dedicated dash remote is designed to place bass-level control within easier reach of the driver.\u003c\/p\u003e\u003cp\u003eInstall the processor in a secure, dry, ventilated location away from excessive heat and moisture. Connect the stereo RCA inputs to a compatible low-level source, route the RCA outputs to the amplifier, and connect constant 12V, chassis ground, and remote turn-on wiring as required. Start with amplifier gain set conservatively, then tune sweep, width, and bass level gradually to suit the subwoofer system.\u003c\/p\u003e","brand":"Audiobank","offers":[{"title":"Default Title","offer_id":45614103199814,"sku":"AB-AP14","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VAwnV62KL.jpg?v=1784358793"},{"product_id":"audiotek-at-1800s-2-channel-car-amplifier","title":"Audiotek AT-1800S 2-Channel Car Amplifier","description":"\u003cp\u003eThe Audiotek AT-1800S is a two-channel, full-range car audio amplifier for adding external amplification to speakers or subwoofers. It is designed for systems that need more output flexibility than a head unit's built-in amplifier can provide. The amplifier is rated at up to 1800 watts maximum power and supports stereo, bridged, and tri-mode system configurations.\u003c\/p\u003e\u003cp\u003eThis Class A\/B model is intended for listeners building a basic speaker upgrade, a subwoofer-focused setup, or a mixed car audio system. Its 2-ohm-stable design gives installers more options when matching compatible speaker loads. The full-range design also allows it to be used beyond dedicated bass duties when configured appropriately.\u003c\/p\u003e\u003cp\u003eThe AT-1800S provides a continuously variable low-pass crossover and bass-boost adjustment for tailoring low-frequency output. An included remote subwoofer control gives the driver convenient access to bass-level adjustment from the cabin. Variable input gain helps match the amplifier to the output level of the connected source unit.\u003c\/p\u003e\u003cp\u003eFor source integration, the amplifier offers nickel-plated RCA inputs as well as speaker-level inputs. This supports use with aftermarket receivers that provide RCA preouts and with systems that need a high-level input connection. A remote turn-on\/turn-off circuit is also included for coordinated amplifier operation with the vehicle audio system.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a MOSFET pulse-width-modulated power supply and includes thermal and speaker-short protection circuitry. Power and protection LED indicators provide a quick operating-status reference. These features make the AT-1800S a practical component for a planned car audio upgrade when matched with compatible speakers, wiring, and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class A\/B Design:\u003c\/strong\u003e Supports stereo amplification for speakers or a bridged configuration for a compatible load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Accommodates compatible low-impedance speaker wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1800-Watt Maximum Rating:\u003c\/strong\u003e Provides the manufacturer-marketed maximum power figure for system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Lets the driver adjust subwoofer-level output from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Supports speaker-level wiring and RCA source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection and Status LEDs:\u003c\/strong\u003e Helps identify power status and protection activation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-1800S uses a heavy-duty aluminum-alloy heat sink to support heat dissipation during operation. Its Class A\/B amplifier architecture, MOSFET power supply, and front-panel control layout are designed for conventional mobile-audio installations. Power and protection LED indicators provide visible status feedback.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry, ventilated location with clearance around the heat sink. Connect it through either the nickel-plated RCA inputs or speaker-level inputs, then set gain, crossover, and bass-boost controls to suit the connected speakers or subwoofers. Confirm final speaker impedance and bridged or tri-mode wiring with the amplifier documentation before powering the system.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614105002054,"sku":"AT-1800S","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/719mwjbqZCS.jpg?v=1784358992"},{"product_id":"audiotek-at-305w-single-glass-fuse-holder-with-wire","title":"Audiotek AT-305W Single Glass Fuse Holder with Wire","description":"\u003cp\u003eThe Audiotek AT-305W is a single glass fuse holder with an attached wire lead for vehicle aftermarket electrical installations. It provides a designated location for a glass fuse within a power circuit, helping support short-circuit protection when the circuit is properly fused. The clear holder and red cable make it a straightforward accessory for organized car-audio or vehicle-electrical wiring.\u003c\/p\u003e\u003cp\u003eThis accessory is intended for installers and vehicle owners adding or servicing aftermarket equipment. It can be used where an inline glass-fuse holder is appropriate for the circuit being protected. Because it is a protection and wiring component rather than an audio source component, it does not add amplification or alter the sound character of a system.\u003c\/p\u003e\u003cp\u003eThe AT-305W uses a single glass-fuse-holder format with a transparent holder body. Its simple inline design keeps the fuse location accessible for inspection and replacement. The included wire lead helps provide a ready-to-integrate connection point during an installation.\u003c\/p\u003e\u003cp\u003eIts red cable is suited to applications where clear circuit identification is useful during routing and service. The holder is intended for vehicle aftermarket installation, including car-audio-related electrical work. Fuse selection should always match the requirements of the connected equipment and wiring.\u003c\/p\u003e\u003cp\u003eUse the AT-305W as part of a properly planned power path for an aftermarket installation. It is best paired with correctly sized wiring, secure connections, and a fuse selected for the specific circuit. Professional installation is recommended when working around vehicle batteries, power wiring, or sensitive vehicle electronics.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Glass Fuse Holder:\u003c\/strong\u003e Provides one inline location for a compatible glass fuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire Included:\u003c\/strong\u003e Includes an attached wire lead for installation work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Holder:\u003c\/strong\u003e Transparent holder body supports easy visual inspection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Cable:\u003c\/strong\u003e Red-colored cable helps identify the installed lead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Aftermarket Use:\u003c\/strong\u003e Intended for aftermarket vehicle electrical installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline Circuit Protection:\u003c\/strong\u003e Supports a fused circuit to help address short-circuit risks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-305W combines a clear glass-fuse-holder body with a red cable lead. Its single-holder configuration is designed for a compact inline connection within an aftermarket vehicle wiring path. No wire gauge, fuse rating, or holder-current rating is specified in the confirmed product information.\u003c\/p\u003e\u003cp\u003eInstall the holder only in a circuit using a compatible glass fuse selected for the wiring and equipment requirements. Route and secure the lead away from heat, moving parts, sharp edges, and exposed metal, and make all connections securely. For battery-connected car-audio power wiring, use qualified installation practices or consult a professional installer.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614105854022,"sku":"AT-305W","price":3.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/411EAnJvrKL.jpg?v=1784359090"},{"product_id":"audiotek-at-4000m-4000w-monoblock-car-amplifier","title":"Audiotek AT-4000M 4000W Monoblock Car Amplifier","description":"\u003cp\u003eThe Audiotek AT-4000M is a one-channel monoblock car amplifier designed for adding a dedicated bass channel to a vehicle audio system. It is intended for use with subwoofers and supports a 2-ohm speaker load. Its compact, surface-mount format makes it suitable for trunk, rear-seat-back, or other secure installation locations with adequate ventilation.\u003c\/p\u003e\u003cp\u003eThis amplifier is a practical choice for listeners building a subwoofer system that needs adjustable low-frequency output. A continuously variable low-pass crossover helps limit the amplifier’s output to bass-focused frequencies. The included remote subwoofer level control allows convenient adjustment of bass output from the driver’s position.\u003c\/p\u003e\u003cp\u003eThe AT-4000M is specified for up to 4000 watts maximum power and uses a Class A-B amplifier design. Its MOSFET pulse-width-modulated power supply is designed to provide the amplifier’s operating power. Continuously variable input gain adjustment helps match the amplifier to the output level of the connected source unit.\u003c\/p\u003e\u003cp\u003eFor system flexibility, the amplifier includes nickel-plated RCA inputs as well as speaker-level inputs. This allows it to be integrated with audio systems that provide either low-level RCA signals or amplified speaker outputs. A remote turn-on\/turn-off circuit supports connection to a vehicle audio system’s switched remote-output lead.\u003c\/p\u003e\u003cp\u003eThe AT-4000M uses an aluminum-alloy heat sink to support heat dissipation during operation. Thermal and speaker-short protection circuitry are included to help safeguard the amplifier and connected system. LED power and protection indicators provide a quick visual status check after installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonoblock Design:\u003c\/strong\u003e Provides one dedicated amplified channel for a bass-focused system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4000W Maximum Power:\u003c\/strong\u003e Supplies a manufacturer-listed maximum output of up to 4000 watts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stability:\u003c\/strong\u003e Supports operation with a 2-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Crossover:\u003c\/strong\u003e Helps tailor output for subwoofer-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Level Control:\u003c\/strong\u003e Lets the driver adjust subwoofer level conveniently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Includes thermal and speaker-short protection for system monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier features a heavy-duty aluminum-alloy heat sink and LED power\/protection indicators. Its Class A-B circuit design uses a MOSFET pulse-width-modulated power supply, soft turn-on circuitry, and nickel-plated input connections. The chassis is designed for surface mounting.\u003c\/p\u003e\u003cp\u003eInstall the AT-4000M on a secure, dry surface with sufficient airflow around the heat sink, and disconnect the vehicle battery’s negative terminal before wiring. Connect it to a compatible 12-volt vehicle electrical system, use either RCA or speaker-level input as appropriate, and wire the connected subwoofer system so its final load is not below 2 ohms. Set gain, low-pass crossover, and bass boost conservatively during initial setup, then use the included remote level control for day-to-day bass adjustment.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614174142534,"sku":"AT-4000M","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81Pgj7prgGS.jpg?v=1784359201"},{"product_id":"audiotek-at-5000s-2-channel-car-amplifier","title":"Audiotek AT-5000S 2-Channel Car Amplifier","description":"\u003cp\u003eThe Audiotek AT-5000S is a 2-channel car audio amplifier designed to add external amplification to speakers or compatible subwoofer setups. It is intended for systems that need more output capability than a head unit’s built-in amplifier can provide. The amplifier is rated for up to 5000 watts of stated maximum power and supports 2-ohm-stable operation. Its full-range design allows it to be considered for speaker-focused or bass-focused installations.\u003c\/p\u003e\u003cp\u003eThis Class A-B amplifier is bridgeable, providing installation flexibility for users building a two-channel stereo system or a bridged single-channel configuration. It is also listed as tri-mode capable, which can support mixed speaker and subwoofer arrangements when the system is designed correctly. Matching speaker impedance and power handling remains important for a safe installation. The AT-5000S is suited to aftermarket car audio systems using an external amplifier rack or dedicated mounting location.\u003c\/p\u003e\u003cp\u003eThe AT-5000S uses a MOSFET pulse-width-modulated power supply to manage power conversion within the amplifier. A continuously variable input gain control helps match the amplifier to the output level of the connected source unit. It also includes a continuously variable low-pass crossover control and bass boost adjustment listed from 0 to +18 dB. These controls give the installer tools to tailor the amplifier’s role in the overall system.\u003c\/p\u003e\u003cp\u003eFor signal connection, the amplifier provides nickel-plated RCA inputs and speaker-level inputs. This gives installers options when connecting an aftermarket receiver or a factory-style source that requires speaker-level signal integration. A remote turn-on\/turn-off circuit supports switched operation with the vehicle audio system. Remote subwoofer control is also included for convenient adjustment of bass level from the cabin.\u003c\/p\u003e\u003cp\u003eThe chassis uses a heavy-duty aluminum alloy heat sink to help dissipate heat during operation. Thermal and speaker-short protection circuitry are included to help protect the amplifier and connected system when a fault condition occurs. LED power and protection indicators provide at-a-glance operating status. For a complete installation, the amplifier requires properly sized power, ground, remote-turn-on, signal, speaker, and fuse-protected battery wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel Design:\u003c\/strong\u003e Supports stereo speaker systems or a bridged amplifier configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stability:\u003c\/strong\u003e Designed to operate with 2-ohm speaker loads per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A-B Operation:\u003c\/strong\u003e Provides a conventional full-range amplifier platform for aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOSFET PWM Power Supply:\u003c\/strong\u003e Manages internal power conversion for amplifier operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Lets the user adjust bass output from the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Indicators:\u003c\/strong\u003e LED status lights show power and protection conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-5000S has an aluminum alloy heat-sink chassis with end-panel power and speaker terminals. Its design includes dedicated connections for battery power, ground, remote turn-on, stereo speaker outputs, RCA-level input, and speaker-level input. The external heat sink and integrated protection circuitry are intended to support dependable use in an automotive environment.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure, well-ventilated surface away from moisture and direct heat sources. Use a properly fused power cable at the battery, a short solid ground connection to bare vehicle metal, and wiring sized appropriately for the installation. Configure gain, crossover, bass boost, speaker impedance, and bridging only after confirming compatibility with the connected speakers or subwoofers.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614186594374,"sku":"AT-5000S","price":158.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/711OVbvvnOS.jpg?v=1784359551"},{"product_id":"audiotek-at-63bt-6-5-double-din-dvd-receiver","title":"Audiotek AT-63BT 6.5\" Double DIN DVD Receiver","description":"\u003cp\u003eThe Audiotek AT-63BT is a 6.5-inch Double DIN multimedia DVD receiver designed to consolidate radio, disc, digital-media, and Bluetooth playback in one dashboard component. It gives drivers a touchscreen-based way to access music and video sources without relying on separate devices. The receiver also supports a rear-view camera input for vehicles equipped with a compatible camera.\u003c\/p\u003e\u003cp\u003eThis receiver is suited to vehicle owners replacing a factory radio in a compatible Double DIN dashboard opening. It combines AM\/FM listening with CD, DVD, USB, microSD, AUX, and Bluetooth source options. That flexibility is useful for systems that still use physical media alongside phone-based music playback.\u003c\/p\u003e\u003cp\u003eFor audio, the AT-63BT provides a built-in 4 x 50-watt maximum-power amplifier and Bluetooth connectivity for wireless device pairing. An integrated microphone supports Bluetooth calling functions. Its source selection includes MP3 and MP4 playback, helping accommodate common audio and video files.\u003c\/p\u003e\u003cp\u003eThe centerpiece is a fixed 6.5-inch TFT LCD touchscreen with an 800 x 480 display resolution. Audiotek also lists customizable screen backgrounds and a preset vehicle-logo startup display. Electronic and mechanical anti-shock functions are included to support disc playback in a moving vehicle.\u003c\/p\u003e\u003cp\u003eAs part of a vehicle multimedia upgrade, the AT-63BT can serve as the central source unit for factory or aftermarket speakers and amplification. The rear camera input automatically switches the display when reverse gear is engaged with a compatible installation. Steering-wheel-control connection capability is also listed, though vehicle-specific integration hardware may be required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Touchscreen:\u003c\/strong\u003e Fixed TFT LCD display provides direct control of receiver functions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble DIN Chassis:\u003c\/strong\u003e Fits vehicles with a compatible Double DIN radio opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Connectivity:\u003c\/strong\u003e Supports wireless pairing and built-in microphone functionality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Media Playback:\u003c\/strong\u003e Plays CD, DVD, VCD, MP3, MP4, and DIVX media.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear Camera Input:\u003c\/strong\u003e Switches to a compatible camera when reverse is engaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Digital Inputs:\u003c\/strong\u003e Includes front USB 2.0 and microSD card access.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-63BT uses a fixed-panel 6.5-inch TFT LCD touchscreen design with an 800 x 480 resolution. Its electronics include both electronic and mechanical anti-shock functions for mobile use. The interface supports selectable screen backgrounds and a preset vehicle-logo startup display.\u003c\/p\u003e\u003cp\u003eInstall the receiver only in a vehicle with a compatible Double DIN dashboard opening and appropriate vehicle-specific mounting and wiring hardware. Connect the front USB, microSD, AUX, Bluetooth, disc, and radio sources as needed, and connect a compatible rear-view camera to use automatic reverse-camera switching. Confirm steering-wheel-control adapter requirements and included installation accessories with the seller before purchase.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614187053126,"sku":"AT-63BT","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71MgeSok6eL.jpg?v=1784404246"},{"product_id":"audiotek-at-990bt-single-din-cd-mp3-receiver","title":"Audiotek AT-990BT Single DIN CD\/MP3 Receiver","description":"\u003cp\u003eThe Audiotek AT-990BT is a Single DIN in-dash CD\/MP3 receiver for vehicles that need straightforward music playback, radio reception, and Bluetooth connectivity in one compact unit. It supports physical discs as well as USB drives and memory cards, giving drivers multiple ways to access a music library. A front auxiliary input adds a wired playback option for compatible portable devices.\u003c\/p\u003e\u003cp\u003eThis receiver is suited to drivers replacing an older factory radio or building a basic audio system around conventional four-channel speakers. Built-in Bluetooth supports wireless audio streaming from a compatible phone or device. The AT-990BT does not list Apple CarPlay or Android Auto capability, so device navigation and app interfaces remain on the connected phone.\u003c\/p\u003e\u003cp\u003eIts published output rating is 50 watts maximum per channel across four channels. Electronic volume, bass, treble, balance, and fader controls provide practical adjustment for the vehicle and speaker layout. RMS power output, speaker-load rating, and amplifier distortion specifications are not published for this model.\u003c\/p\u003e\u003cp\u003eThe AT-990BT combines CD playback with MP3 and WMA file support, plus USB, SD, and MMC media compatibility. Repeat, random, and intro playback modes help manage stored music, while last-memory operation can resume a previous playback position. A built-in high-sensitivity FM receiver and preset scan function provide broadcast-radio access.\u003c\/p\u003e\u003cp\u003eFor system expansion, the receiver is listed with four-channel RCA outputs for connection to compatible external amplification. Its detachable face panel, digital clock display, and infrared remote control add everyday convenience. This makes it a practical choice for an older vehicle that benefits from multiple media sources without adding a touchscreen receiver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle DIN Chassis:\u003c\/strong\u003e Fits a standard Single DIN dashboard opening with appropriate vehicle-specific hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Connectivity:\u003c\/strong\u003e Streams audio wirelessly from compatible Bluetooth devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD and File Playback:\u003c\/strong\u003e Supports CD-R\/RW discs plus MP3 and WMA files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB, SD, and MMC Media:\u003c\/strong\u003e Plays compatible music stored on supported removable media.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Maximum Output:\u003c\/strong\u003e Rated at 50 watts maximum per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Outputs:\u003c\/strong\u003e Provides four-channel RCA outputs for compatible external amplification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eAudiotek does not publish the AT-990BT's cabinet-material composition or detailed chassis construction. Its functional design includes a detachable face panel, front USB and auxiliary connections, an integrated display with digital clock, and direct-access front-panel controls. An infrared remote is included for source, music, and frequency selection.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a Single DIN receiver before purchase, then use the correct vehicle-specific dash kit, wiring harness adapter, and antenna adapter as required. Connect the vehicle wiring according to the receiver's supplied wiring information and insulate all connections securely. Use the rear four-channel RCA outputs only with compatible external audio equipment, and verify the vehicle's speaker wiring before powering the receiver.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614189281350,"sku":"AT-990BT","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71vhExebBrL.jpg?v=1784359839"},{"product_id":"audiotek-at-d265-double-din-bluetooth-digital-media-receiver","title":"Audiotek AT-D265 Double DIN Bluetooth Digital Media Receiver","description":"\u003cp\u003eThe Audiotek AT-D265 is a Double DIN digital media receiver designed to update a vehicle with Bluetooth-enabled audio, radio listening, and playback from portable media. It is suited to drivers who want a straightforward in-dash source unit without relying on disc playback. Its Double DIN form factor is intended for vehicles with a compatible dashboard opening and appropriate installation hardware.\u003c\/p\u003e\u003cp\u003eBluetooth connectivity supports wireless audio use and hands-free calling functions from a compatible phone. USB, auxiliary, and memory-card inputs provide additional ways to connect stored music and external audio sources. MP3 playback support makes the receiver useful for digital music files carried on compatible media.\u003c\/p\u003e\u003cp\u003eThe AT-D265 is listed with 300 watts of maximum power, expressed as 75 watts across four channels. This built-in four-channel output is intended to operate a basic factory or aftermarket speaker system directly. An onboard equalizer provides a means to adjust the system's tonal balance from the receiver.\u003c\/p\u003e\u003cp\u003eFM radio capability gives the unit a conventional broadcast-audio source alongside its digital-media functions. The front-panel controls and included remote-control functionality are intended to make source and playback adjustments convenient from inside the vehicle. Its feature set focuses on everyday music playback, phone connectivity, and common media formats.\u003c\/p\u003e\u003cp\u003eThis receiver can serve as the central source in a modest car-audio refresh or as part of a larger speaker upgrade. It can be paired with compatible aftermarket speakers and vehicle-specific mounting and wiring accessories. Verify dashboard fitment, harness compatibility, antenna connection requirements, and steering-wheel-control retention needs before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble DIN Chassis:\u003c\/strong\u003e Fits dashboards designed for a standard Double DIN receiver opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Connectivity:\u003c\/strong\u003e Supports wireless audio streaming and hands-free phone use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Power:\u003c\/strong\u003e Listed at 75 watts across each of four channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Input:\u003c\/strong\u003e Connects compatible USB media for digital music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMemory-Card Input:\u003c\/strong\u003e Adds another playback option for stored audio files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Equalizer:\u003c\/strong\u003e Lets users tailor tonal balance for their vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-D265 uses a dashboard-oriented Double DIN receiver layout with integrated control functions for radio, Bluetooth, and connected media. Specific enclosure materials, display specifications, and chassis dimensions are not published in the confirmed product information. Its design is centered on consolidating common source functions into a conventional in-dash radio format.\u003c\/p\u003e\u003cp\u003eInstallation requires a vehicle with a compatible Double DIN opening or the proper dash kit, plus a matching wiring harness and antenna adapter when needed. Connect the receiver to the vehicle power, ground, speakers, and applicable accessory leads according to the installation documentation. For the cleanest upgrade path, use vehicle-specific integration parts and confirm compatibility before purchase.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614193672262,"sku":"AT-D265","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_22fd6395-54eb-4df9-b260-4721af610762.webp?v=1784360126"},{"product_id":"audiotek-at-mc82-2-channel-8-gauge-motorcycle-amp-kit","title":"AUDIOTEK AT-MC82 2-Channel 8-Gauge Motorcycle Amp Kit","description":"\u003cp\u003eThe AUDIOTEK AT-MC82 is a 2-channel, 8-gauge amplifier installation kit designed for motorcycle audio systems. It provides the primary wiring and connection components needed to add a compatible external amplifier. The kit helps organize the power, ground, signal, and speaker connections used in a two-channel installation.\u003c\/p\u003e\u003cp\u003eThis kit is intended for riders building or upgrading a motorcycle sound system with a separate two-channel amplifier. It is a practical choice when an installation requires dedicated power and ground wiring along with RCA signal interconnects. The included connection accessories support a more complete installation without sourcing every basic item separately.\u003c\/p\u003e\u003cp\u003eThe AT-MC82 uses premium power and ground wire intended to support efficient power transfer from the vehicle electrical system to the amplifier. Its 8-gauge wire configuration is suited to the kit's motorcycle-amplifier installation purpose. Proper amplifier sizing, fuse protection, and wire routing should always be matched to the specific system being installed.\u003c\/p\u003e\u003cp\u003eA 2-channel RCA interconnect is included for carrying low-level audio signal from a compatible receiver or source unit to the amplifier. The kit also includes speaker and connection wiring for linking the amplifier to a two-channel speaker setup. Individually labeled wires and cables help distinguish connections during installation.\u003c\/p\u003e\u003cp\u003eThe AT-MC82 fits into a motorcycle audio upgrade path where an amplifier, source unit, and speakers are selected separately. It can simplify the wiring portion of a two-channel system while leaving amplifier power output and speaker selection up to the installer. Verify the amplifier's terminal sizes, fuse requirements, and wiring needs before beginning the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Configuration:\u003c\/strong\u003e Supports wiring for a compatible two-channel motorcycle amplifier setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Gauge Wiring:\u003c\/strong\u003e Provides 8-gauge wiring for amplifier power and ground connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower And Ground Leads:\u003c\/strong\u003e Supplies the main wiring needed between battery and amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Interconnect Cables:\u003c\/strong\u003e Connects a compatible receiver or source unit to an amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLabeled Connections:\u003c\/strong\u003e Helps identify wires and cables during system installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Accessories:\u003c\/strong\u003e Includes accessory components for a more complete amplifier installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-MC82 is organized as a motorcycle amplifier wiring kit rather than an amplifier or speaker package. Its design centers on an 8-gauge power and ground wiring arrangement, two-channel RCA interconnects, and labeled connection cables. The included accessories are intended to support the physical and electrical portions of a basic two-channel amplifier installation.\u003c\/p\u003e\u003cp\u003ePlan wire paths before mounting the amplifier, keeping power wiring protected from abrasion and signal cables routed neatly where possible. Connect the kit only to a compatible two-channel amplifier and use fuse protection appropriate for that amplifier and the motorcycle electrical system. Professional installation is recommended when battery connections, amplifier mounting, or motorcycle disassembly are required.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614195933254,"sku":"AT-MC82","price":73.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81gY_n32oiL.jpg?v=1784360320"},{"product_id":"audiotek-at-ps16-13-8v-16a-dc-power-supply","title":"Audiotek AT-PS16 13.8V 16A DC Power Supply","description":"\u003cp\u003eThe Audiotek AT-PS16 is a regulated AC-to-DC power supply designed to provide 13.8V DC power for compatible 12V equipment. With a maximum current output of 16A, it gives installers, hobbyists, and mobile-electronics users a stationary power source for supported 12V devices. It is intended for home, office, and installation environments where dependable DC power is needed from a 110V AC outlet.\u003c\/p\u003e\u003cp\u003eThis unit helps bridge the gap between standard household AC power and equipment designed around 12V automotive-style electrical systems. It is suited to compatible mobile audio equipment and other 12V devices that operate within its 13.8V, 16A output capability. Because it is a power supply rather than an audio processor or amplifier, it is designed to support connected equipment without adding a sound character of its own.\u003c\/p\u003e\u003cp\u003eThe AT-PS16 uses regulated DC output to provide stable power for supported loads. Its published protection features include over-voltage protection, over-heat protection, and short-circuit fuse protection. These provisions are intended to support more dependable operation in routine installation and bench-use settings.\u003c\/p\u003e\u003cp\u003eA heavy-duty heatsink is part of the AT-PS16 design to help manage operating heat. The compact, straightforward format is aimed at users who need a practical power source without a complicated control interface. Its single DC output keeps the setup focused on powering one connected system or distribution point at a time.\u003c\/p\u003e\u003cp\u003eIn a mobile-electronics workflow, the AT-PS16 can serve as a 13.8V source for compatible 12V equipment used away from a vehicle battery. It can also fit an installer bench, office setup, or home workspace where compatible equipment needs AC-to-DC conversion. Confirm the connected device's voltage, current demand, polarity, and connection requirements before use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e13.8V Regulated Output:\u003c\/strong\u003e Supplies DC power for compatible 12V equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16A Maximum Output:\u003c\/strong\u003e Supports loads requiring up to 16A.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110V AC Input:\u003c\/strong\u003e Connects to a standard 110V AC power source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-Voltage Protection:\u003c\/strong\u003e Adds protection against excessive output-voltage conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOver-Heat Protection:\u003c\/strong\u003e Helps protect the supply during high-temperature operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Heatsink:\u003c\/strong\u003e Assists with heat dissipation during use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-PS16 has a black, heavy-duty regulated-power-supply design with a built-in heatsink. Its design priorities are stable performance, efficient operation, and straightforward use for compatible 12V equipment. The published configuration includes one output.\u003c\/p\u003e\u003cp\u003eInstall the power supply in a location with adequate ventilation around the heatsink and connect it only to a 110V AC source. Verify that the connected equipment is compatible with 13.8V DC and does not exceed the unit's 16A maximum current rating. Use it for home, office, or installer applications where a regulated 12V-class DC source is required.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614196490310,"sku":"AT-PS12","price":51.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618nLLJ_QCL.jpg?v=1784360377"},{"product_id":"audiotek-at-spw10ga-25rg-10-gauge-25-ft-speaker-wire","title":"Audiotek AT-SPW10GA\/25RG 10-Gauge 25-Ft Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW10GA\/25RG is a 25-foot roll of 10-gauge speaker wire for connecting speakers in vehicle, mobile, marine, UTV, and home audio installations. Its heavy-gauge design gives installers a substantial cable option for audio-system wiring where equipment and terminals accept 10 AWG conductors. It is intended for custom wiring projects rather than as a plug-and-play terminated cable.\u003c\/p\u003e\u003cp\u003eThis cable is suited to installers replacing damaged speaker wiring, building a custom system, or routing new wire to speakers. The 25-foot length can be cut to suit the layout of an individual installation. Because it is supplied as bulk cable, the final routing and termination can be matched to the vehicle or audio-system design.\u003c\/p\u003e\u003cp\u003eA flexible multi-strand construction helps the cable bend and twist around interior panels, enclosures, and other installation obstacles. The listed 469-strand count supports its high-strand design. An ultra-flat profile is also specified to help with routing through tighter spaces.\u003c\/p\u003e\u003cp\u003eThe clear, glossy jacket is designed to insulate the cable while maintaining flexibility. Audiotek lists resistance to heat, oil, chemicals, and abrasion, with a stated operating-temperature range of -40 to 105°C. Soft PVC insulation adds protection for installed runs in demanding mobile-audio environments.\u003c\/p\u003e\u003cp\u003eUse the AT-SPW10GA\/25RG as part of a complete speaker connection path between compatible amplifiers, crossovers, and speakers. It can support custom car-audio, home-audio, marine, UTV, and other mobile-audio wiring projects. Select compatible terminals, connectors, and routing protection separately based on the equipment and installation location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Gauge Cable:\u003c\/strong\u003e Provides a heavy-gauge speaker-wire option for compatible audio connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25-Foot Roll:\u003c\/strong\u003e Gives installers cut-to-length flexibility for custom wire routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e469-Strand Construction:\u003c\/strong\u003e Uses a high strand count to support cable flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear Glossy Jacket:\u003c\/strong\u003e Insulates the cable while maintaining a clean installation appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft PVC Insulation:\u003c\/strong\u003e Helps the cable bend more easily during routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Resistance:\u003c\/strong\u003e Listed jacket resists heat, oil, chemicals, and abrasion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-SPW10GA\/25RG uses a clear coated jacket over finely stranded cable construction. Its flexible, ultra-flat design is intended to make routing more manageable in confined areas. The jacket is specified for heat, oil, chemical, and abrasion resistance, with a listed temperature range of -40 to 105°C.\u003c\/p\u003e\u003cp\u003eMeasure the intended route before cutting so the 25-foot roll is allocated appropriately between speakers and audio components. Confirm that the amplifier, crossover, speaker terminals, and any connectors used can accept 10-gauge wire. Route the cable away from moving parts, sharp edges, and excessive heat, and use suitable protection where the cable passes through panels or other potentially abrasive areas.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614199046214,"sku":"AT-SPW10GA\/25RG","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81AQHeu5TML.jpg?v=1784360564"},{"product_id":"audiotek-at-spw18ga-770rg-18-gauge-770-foot-speaker-wire","title":"Audiotek AT-SPW18GA\/770RG 18-Gauge 770-Foot Speaker Wire","description":"\u003cp\u003eThe Audiotek AT-SPW18GA\/770RG is a bulk roll of 18-gauge speaker wire for building or replacing speaker-level audio connections. Its 770-foot length provides ample cable for larger vehicle installations, multiple-speaker systems, and custom wiring projects. It is intended for installers and enthusiasts who need wire supplied in one continuous bulk package.\u003c\/p\u003e\u003cp\u003eThis speaker cable is designed for audio-system wiring between an amplifier or receiver and compatible speakers. The 18-gauge format is suited to organized speaker runs where the system design calls for this wire size. It can be used when creating new speaker leads or replacing existing wiring during an upgrade.\u003c\/p\u003e\u003cp\u003eThe AT-SPW18GA\/770RG is listed with oxygen-free construction and stranded conductors. Stranded wire is flexible for routing through typical installation paths and for forming custom cable lengths. The cable is described for professional speaker applications and custom speaker-cable building.\u003c\/p\u003e\u003cp\u003eA durable, flexible rubber outer jacket helps protect the internal conductors during handling and routing. The jacketed construction supports cleaner cable management compared with loose conductor wire. Cut the required length from the roll to suit the layout of each speaker connection.\u003c\/p\u003e\u003cp\u003eThis Audiotek bulk wire is a practical component for car audio and other speaker-cable projects requiring long runs of 18-gauge wire. Pair it with appropriately sized speaker terminals, connectors, or other termination hardware selected for the installation. Verify the wire gauge, cable length, routing plan, and amplifier-to-speaker requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e18-Gauge Wire:\u003c\/strong\u003e Provides an 18 AWG speaker-cable format for compatible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e770-Foot Bulk Roll:\u003c\/strong\u003e Supplies long-length wire for extensive custom wiring projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOxygen-Free Construction:\u003c\/strong\u003e Listed with oxygen-free material construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStranded Conductors:\u003c\/strong\u003e Supports flexible handling when routing and terminating cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Outer Jacket:\u003c\/strong\u003e Features a thick, durable flexible rubber outer jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker Application:\u003c\/strong\u003e Intended for speaker connections and custom audio cable building.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-SPW18GA\/770RG uses stranded conductors inside a thick, durable flexible rubber outer jacket. This construction is designed for handling and routing as part of a speaker-wiring installation. The product is supplied as a 770-foot bulk roll rather than pre-terminated speaker cables.\u003c\/p\u003e\u003cp\u003eMeasure each planned speaker run before cutting cable and leave appropriate service length for routing and termination. Use connectors or terminals that match the equipment and installation method, and follow the amplifier, receiver, and speaker manufacturers' wiring guidance. Confirm that 18-gauge wire is appropriate for the required run length and system design.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614201012294,"sku":"AT-SPW18GA\/770RG","price":90.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71AY65H4Y2L.jpg?v=1784360725"},{"product_id":"audiotek-pi2000-2000w-12v-power-inverter","title":"Audiotek PI2000 2000W 12V Power Inverter","description":"\u003cp\u003eThe Audiotek PI2000 is a 12V DC-to-AC power inverter designed to bring household-style power to a vehicle, boat, or other compatible 12V battery source. It supplies up to 800W of continuous power, with 1600W maximum power and a 2000W peak rating for short startup demands. Three AC outlets and two USB charging ports allow multiple compatible devices to be connected from one compact power source.\u003c\/p\u003e\u003cp\u003eThis inverter is suited to drivers, campers, mobile workers, and backup-power users who need to operate lower-power AC electronics away from a wall outlet. It can support items such as laptops, cameras, TVs, game consoles, lamps, and USB-powered phones or tablets when their combined rated demand remains below 800W. It is a power-conversion accessory rather than a car audio amplifier or battery charger.\u003c\/p\u003e\u003cp\u003eIts DC-to-AC design converts a vehicle's 12V battery power to 110-120V AC output for compatible household devices. The dual USB ports provide 5V charging output with automatic current delivery up to 2.1A per port. This combination makes the PI2000 useful for mixed loads that include both plug-in electronics and USB devices.\u003c\/p\u003e\u003cp\u003eSafety-focused hardware includes four replaceable 25A fuses and an integrated cooling fan. The inverter is specified with over-voltage, overload, over-current, under-voltage, overheating, and short-circuit protection. Replaceable fuses provide a practical service feature should a fuse require replacement.\u003c\/p\u003e\u003cp\u003eThe PI2000 can be connected through its included cigarette-lighter plug for lower-power use or directly to a vehicle battery with the included black and red battery clips. For connected AC devices rated above 150W, direct battery connection is specified instead of using a typical vehicle 12V accessory outlet. This makes it a flexible addition to a vehicle electrical setup when the load and connection method are matched correctly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W Continuous Output:\u003c\/strong\u003e Supports compatible connected loads with a combined rated demand below 800W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000W Peak Rating:\u003c\/strong\u003e Provides short-duration capacity for certain device startup demands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree AC Outlets:\u003c\/strong\u003e Connect up to three compatible 110-120V AC devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual USB Charging:\u003c\/strong\u003e Two 5V ports provide up to 2.1A charging output each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Fuse Protection:\u003c\/strong\u003e Four 25A fuses are designed for practical maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Connection Accessories:\u003c\/strong\u003e Use the cigarette plug or battery clips as appropriate.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Audiotek PI2000 uses a compact black-and-red form factor measuring 10.5 x 7 x 3.5 inches. Its design incorporates an internal cooling fan and four replaceable 25A fuses. The outlet and USB layout is intended to keep AC and USB-powered accessories available from the same inverter.\u003c\/p\u003e\u003cp\u003eMount or place the inverter where it has ventilation and is away from prolonged direct sunlight and heat-sensitive materials. Tighten the positive and negative battery connections before use, as loose connections can overheat from poor contact. Use the included cigarette-lighter plug only for lower-power loads; for AC devices rated above 150W, connect the included battery clips directly to the vehicle battery and keep the total connected rated load below 800W.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614202060870,"sku":"PI2000","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71d5oZV_IHL.jpg?v=1784360807"},{"product_id":"audiotek-pi3000-12v-1500w-power-inverter","title":"Audiotek PI3000 12V 1500W Power Inverter","description":"\u003cp\u003eThe Audiotek PI3000 is a 12V DC-to-AC power inverter designed to bring household-style power to a vehicle, boat, or other compatible 12V battery system. It converts battery power into 110-120V AC output for portable electronics and other appropriately rated devices. With 1500W of continuous power and 3000W peak power, it is intended for loads that need more capacity than a basic USB charger or small accessory inverter.\u003c\/p\u003e\u003cp\u003eThis inverter is a practical option for drivers, campers, mobile work setups, and off-grid applications that need several power connection types in one unit. Three AC outlets allow multiple plug-in devices to be connected, while two USB ports provide direct charging for compatible USB-powered equipment. Total connected AC load should remain below the 1500W continuous rating.\u003c\/p\u003e\u003cp\u003eThe PI3000 uses a modified sine wave AC output and operates from a 12V DC source. Its 60 Hz output is suited to many common electronic devices and chargers when their power requirements are within the inverter's limits. The 3000W peak rating is for short-duration demand rather than sustained operation.\u003c\/p\u003e\u003cp\u003eIntegrated protection functions help monitor abnormal operating conditions, including over-voltage, under-voltage, overload, over-current, overheating, and short circuits. A cooling fan supports thermal management during use, and the fuse bank is replaceable for serviceability. A dual-color LED indicator provides operating and shutdown status at a glance.\u003c\/p\u003e\u003cp\u003eFor lower-power use, the included cigarette-lighter plug can connect to a vehicle accessory outlet. For AC devices rated above 150W, use the included red and black battery clips for a direct battery connection instead of a typical vehicle accessory socket. This makes the PI3000 a flexible power-source component for vehicle-based electronics, travel gear, and portable work equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Continuous Output:\u003c\/strong\u003e Supports sustained loads up to its rated continuous power capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3000W Peak Capacity:\u003c\/strong\u003e Provides short-term headroom for devices with higher startup demand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree AC Outlets:\u003c\/strong\u003e Lets you connect up to three compatible 110V devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual USB Charging:\u003c\/strong\u003e Includes two 5V\/2.1A USB ports for compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety Protection Circuitry:\u003c\/strong\u003e Helps guard against voltage, current, heat, overload, and short-circuit faults.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect-Battery Connection Option:\u003c\/strong\u003e Includes battery clips for higher-power applications above 150W.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PI3000 has a compact red enclosure measuring 12 x 7 x 3.5 inches. Its layout combines three AC outlets, two USB outputs, a power-status indicator, replaceable fuses, and an integrated cooling fan. The serviceable fuse design uses six 30A fuses.\u003c\/p\u003e\u003cp\u003eMount the inverter on a stable surface with clear ventilation around the fan and avoid prolonged direct sunlight or heat-sensitive surroundings. Tighten positive and negative connections securely before operation. Use the cigarette-lighter plug only for lower-power loads; for AC equipment rated above 150W, connect the included battery clips directly to a compatible 12V battery.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614202847302,"sku":"PI3000","price":224.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71qGkB2i2IL_94468279-a4d1-4b66-b89b-ca273bb40ae3.jpg?v=1784360885"},{"product_id":"audiotek-at-bc24-positive-negative-battery-terminal-set","title":"Audiotek AT-BC24 Positive\/Negative Battery Terminal Set","description":"\u003cp\u003eThe Audiotek AT-BC24 is a 2-in-1 battery-terminal accessory designed for car-audio power wiring upgrades. It provides clearly identified positive and negative battery connections while adding dedicated cable outputs for aftermarket electrical connections. This makes it suited to installations that need to route large-gauge power or ground cable from the vehicle battery.\u003c\/p\u003e\u003cp\u003eThis terminal set is intended for car-audio enthusiasts and installers building or updating an amplifier power system. Its connection layout provides two 0 AWG outputs and one 4 AWG output for distributing compatible cable runs. Clearly marked polarity helps distinguish the positive and negative sides during setup.\u003c\/p\u003e\u003cp\u003eThe AT-BC24 does not process or reproduce audio; its role is to support the electrical foundation of a mobile-audio system. A secure battery connection is important when adding high-current accessories such as amplifiers and distribution hardware. The terminal design focuses on organizing compatible large-gauge cable connections at the battery.\u003c\/p\u003e\u003cp\u003eAudiotek specifies anti-oxidation properties for the terminal clamping surfaces, supporting use in an automotive environment. The connection screws are designed to secure attached wiring. Two plastic protection covers are included to help cover the terminal connections after installation.\u003c\/p\u003e\u003cp\u003eUse the AT-BC24 as part of a properly fused vehicle power installation with cable, fuse protection, and distribution components selected for the connected equipment. Verify battery-post fitment, cable size, terminal clearance, and polarity before installation. For complex or high-current systems, professional installation is recommended.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-in-1 Terminal Set:\u003c\/strong\u003e Includes positive and negative battery terminal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0 AWG Outputs:\u003c\/strong\u003e Provides two connection points for compatible 0 AWG cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 AWG Output:\u003c\/strong\u003e Adds one connection point for compatible 4 AWG cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity Identification:\u003c\/strong\u003e Positive and negative connectors are clearly marked.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Covers:\u003c\/strong\u003e Includes two plastic covers for terminal protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew Connections:\u003c\/strong\u003e Screws are designed to secure attached cable connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-BC24 uses automotive battery-terminal clamps with an anti-oxidation specification and screw-secured cable connection points. Its positive and negative connectors are clearly marked to aid polarity identification. Two plastic protection covers are included with the terminal set.\u003c\/p\u003e\u003cp\u003eInstall only after disconnecting the vehicle battery and confirming the correct positive and negative post locations. Use compatible 0 AWG or 4 AWG cable where applicable, tighten connections securely, and use correctly rated fuse protection for any added power wiring. Check that the covers fit without interfering with adjacent battery hardware or the vehicle hood.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614205403206,"sku":"AT-BC24","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/816x4SXZ6GL.jpg?v=1784360981"},{"product_id":"gravity-agr-s209bt-single-din-bluetooth-cd-receiver","title":"Gravity AGR-S209BT Single-DIN Bluetooth CD Receiver","description":"\u003cp\u003eThe Gravity AGR-S209BT is a single-DIN CD\/MP3 car audio receiver for vehicles that need a straightforward replacement or upgrade head unit. It combines disc playback, Bluetooth, USB, SD\/MMC media support, front AUX input, and AM\/FM radio in one dashboard component. This makes it suitable for drivers who use a mix of physical discs, stored music files, radio, and phone-based audio.\u003c\/p\u003e\u003cp\u003eBluetooth functionality provides a wireless connection option for compatible devices, supporting music streaming and hands-free calling. For wired and removable-media playback, the receiver includes a front AUX input, USB port, and SD\/MMC card slot. Its CD mechanism also supports CD-R and CD-RW media in addition to standard CDs.\u003c\/p\u003e\u003cp\u003eThe AGR-S209BT uses a built-in four-channel amplifier rated at 50 watts maximum per channel. Electronic volume, bass, treble, balance, and fader controls allow basic adjustment of the sound sent to the vehicle's speakers. Preset EQ modes for Pop, Rock, and Classic provide quick tonal starting points for different music styles.\u003c\/p\u003e\u003cp\u003eFor everyday operation, the receiver includes repeat, random, and intro playback functions, along with last-memory and preset-scan functions. A built-in high-sensitivity FM receiver and digital clock add practical daily-use features. Electronic skip protection is included to help maintain CD playback during normal vehicle movement.\u003c\/p\u003e\u003cp\u003eThis receiver can serve as the source unit in a basic four-speaker system or as the starting point for a more expanded setup. Its four-channel RCA output supports connection to external audio equipment where appropriate. The detachable faceplate and included infrared remote add convenience for parking security and passenger-side control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-DIN Chassis:\u003c\/strong\u003e Fits vehicles configured for a standard single-DIN receiver opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Connectivity:\u003c\/strong\u003e Supports wireless music streaming and hands-free calling with compatible devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCD\/MP3 Playback:\u003c\/strong\u003e Plays CDs, CD-R\/RW discs, MP3, and WMA files.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Media Inputs:\u003c\/strong\u003e Includes USB, SD\/MMC card, and front AUX connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Built-in amplification is rated at 50 watts maximum per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA System Expansion:\u003c\/strong\u003e Four-channel RCA output supports connection to compatible external equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AGR-S209BT has a conventional single-DIN in-dash design with a detachable front panel, front-accessible AUX input, and clear physical controls for source selection and audio adjustment. Published product information identifies a digital clock display, infrared remote control, and electronic audio controls. Specific chassis-material and display-panel specifications are not published.\u003c\/p\u003e\u003cp\u003eInstallation requires a vehicle with a compatible single-DIN dashboard opening and the appropriate vehicle-specific mounting kit and wiring adapter when needed. The included wire harness is intended for receiver connection, while removal keys are supplied for installation or service. Use the receiver's built-in four-channel output for a conventional speaker system, or use its RCA outputs when integrating compatible external amplification.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625046827078,"sku":"AGR-S209BT","price":76.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/2_7d917773-b496-437d-9e3d-b22f710b96bc.webp?v=1784373777"},{"product_id":"gravity-g-220tw-1-silk-dome-tweeters","title":"Gravity G-220TW 1\" Silk Dome Tweeters","description":"\u003cp\u003eThe Gravity G-220TW is a 1-inch car-audio dome tweeter set designed to add dedicated high-frequency reproduction to a vehicle sound system. It is intended for listeners building or refreshing a speaker system that needs clearer treble detail beyond what larger drivers typically reproduce. The compact tweeter format makes it suitable for custom installations and component-style upgrades.\u003c\/p\u003e\u003cp\u003eIts silk-dome design is made for smooth reproduction of upper-frequency content such as vocals, cymbals, strings, and ambient details. By assigning treble information to dedicated tweeters, a system can better separate high-frequency material from midrange and bass duties. The result depends on the vehicle, mounting location, crossover setup, and supporting equipment.\u003c\/p\u003e\u003cp\u003eThe G-220TW is rated for 300 watts maximum power and uses a neodymium magnet. Neodymium allows a compact motor structure, which is useful in tweeter applications where installation space can be limited. The product is specified as a wired vehicle speaker component rather than a standalone amplified audio system.\u003c\/p\u003e\u003cp\u003eThese tweeters are a practical fit for car-audio systems using compatible midrange speakers, coaxial speakers, or subwoofers. They can be considered when replacing damaged tweeters or adding high-frequency drivers to a custom front-stage setup. Correct frequency protection and power matching should be determined by the installer or system designer.\u003c\/p\u003e\u003cp\u003eThe G-220TW is sold as a pair in retail listings, providing left- and right-channel tweeters for a stereo installation. Its 1-inch dome size supports compact placement in suitable factory locations, custom panels, or other purpose-built mounting positions. Verify available space, mounting method, and wiring requirements before purchase or installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact tweeter format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Maximum Rating:\u003c\/strong\u003e Supplies a published maximum-power figure for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Uses a compact magnetic motor design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle Audio Application:\u003c\/strong\u003e Intended for wired car-audio speaker installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair Configuration:\u003c\/strong\u003e Retail listings identify the product as a stereo pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor:\u003c\/strong\u003e Supports installation where larger speakers will not fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G-220TW combines a silk dome with a neodymium magnet assembly in a compact tweeter design. Retail information identifies a black and metallic appearance, while the product is classified as a vehicle tweeter. Its small 1-inch driver size is intended for installations where high-frequency drivers need minimal mounting space.\u003c\/p\u003e\u003cp\u003eUse the G-220TW as part of a compatible left\/right car-audio system, with mounting locations selected for fit and desired sound staging. Confirm the available mounting dimensions and use appropriate wiring, crossover protection, and amplifier or head-unit settings for the rest of the system. Manufacturer-confirmed impedance, crossover point, mounting cutout, mounting depth, and included mounting hardware specifications were not located.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45625104924742,"sku":"G-220TW","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91CjjUUmQBL.jpg?v=1784373814"},{"product_id":"gravity-g3-8d2-8-dual-2-ohm-car-subwoofer","title":"Gravity G3-8D2 8\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-8D2 is an 8-inch car audio subwoofer designed for systems that need bass output in a compact speaker format. Its dual 2-ohm voice coil arrangement provides wiring flexibility when matching the subwoofer to a compatible amplifier. This makes it a practical option for installations where enclosure and mounting space are limited.\u003c\/p\u003e\u003cp\u003eThis model is rated for up to 1,000 watts of peak power. It is intended to reproduce low-frequency content for a fuller, more grounded sound in a car audio system. An appropriately matched amplifier and enclosure are required for operation.\u003c\/p\u003e\u003cp\u003eThe G3-8D2 uses a pressed paper cone intended for car audio bass reproduction. A high-roll foam surround supports cone movement while providing a flexible outer suspension. These materials are specified as part of the subwoofer's competition-grade construction.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling design is listed for the G3-8D2. This design is intended to help manage heat during extended playback. The subwoofer also uses a high-flux motor system to support its low-frequency performance.\u003c\/p\u003e\u003cp\u003eWith its 8-inch diameter and dual 2-ohm coils, the G3-8D2 can fit into a compact subwoofer upgrade path when paired with compatible equipment. It is suited to listeners building or updating a dedicated bass section in a vehicle. Confirm enclosure requirements, amplifier stability, available mounting depth, and final wired impedance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Subwoofer:\u003c\/strong\u003e Compact woofer size for vehicle bass systems with limited installation space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000-Watt Peak Rating:\u003c\/strong\u003e Listed peak-power handling for selecting compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides multiple possible wiring configurations with a suitable amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Cone material specified for low-frequency car audio reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Flexible surround supports the cone's movement during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Listed cooling design intended to help manage heat over extended use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Gravity G3-8D2 combines a pressed paper cone, high-roll foam surround, and high-flux motor system. Its construction is designed around compact 8-inch bass reproduction, with an airflow cooling system listed as part of the design. The dual voice coil configuration is a central part of its electrical design.\u003c\/p\u003e\u003cp\u003eUse the G3-8D2 only with an amplifier that remains stable at the final impedance created by the chosen voice-coil wiring. Install it in an enclosure designed for the subwoofer after confirming the required cutout, mounting depth, and enclosure recommendations with the manufacturer or seller. Speaker wire, an enclosure, an amplifier, and installation hardware are not confirmed as included.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626496876614,"sku":"G3-8D2","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_2043878f-980a-4fd4-9048-86fcfdb235c7.jpg?v=1784374693"},{"product_id":"gravity-g7-12d2-12-dual-2-ohm-car-subwoofer","title":"GRAVITY G7-12D2 12\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe GRAVITY G7-12D2 is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. It is intended for listeners building a bass-focused upgrade with a separate compatible amplifier and enclosure. Its dual 2-ohm voice coil design provides wiring flexibility when matching the subwoofer to an amplifier.\u003c\/p\u003e\u003cp\u003eThis model uses a competition-grade pressed paper cone and a high-roll foam surround. That combination is designed to support controlled cone movement while reproducing bass-heavy music. The published frequency response is 35 Hz to 500 Hz, covering the low-frequency range typically assigned to a subwoofer.\u003c\/p\u003e\u003cp\u003eThe G7-12D2 carries a published peak-power rating of 4,800 watts per subwoofer. Because peak ratings are not the same as continuous amplifier requirements, amplifier selection should be based on compatible impedance operation and conservative gain setup. Proper tuning helps keep bass output clear and reduces the chance of audible distortion.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling system is part of the subwoofer's listed design. This feature is intended to help manage heat during extended listening sessions. The listed sensitivity is 88 dB, and final output will also depend on the enclosure, amplifier power, vehicle acoustics, and installation quality.\u003c\/p\u003e\u003cp\u003eThe G7-12D2 is a bare subwoofer rather than a complete powered bass system. It is suited to custom sealed or ported enclosure projects where the installer can choose the box style and wiring arrangement. With its two 2-ohm voice coils, it can be wired for either a 1-ohm or 4-ohm final load when both coils are used correctly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated low-frequency reproduction to a custom car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports series or parallel wiring to suit compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4,800-Watt Peak Rating:\u003c\/strong\u003e Published peak power handling per individual subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Provides a purpose-built cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel while helping maintain a durable edge suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage heat during extended high-output operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GRAVITY G7-12D2 uses a competition-grade pressed paper cone, high-roll foam surround, and dual voice coil motor structure. Its design is intended for installation in a vehicle-specific or custom-built subwoofer enclosure. The subwoofer is listed for car-audio use and requires an enclosure for mounting.\u003c\/p\u003e\u003cp\u003eUse an amplifier that is stable at the final impedance created by the selected wiring method. The two 2-ohm coils can be wired in parallel for a 1-ohm load or in series for a 4-ohm load; never connect the subwoofer until the amplifier's supported load is confirmed. Secure the driver to a properly sealed enclosure, use adequately sized speaker wire, and set amplifier gain and low-pass filtering carefully to avoid distortion.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626620215366,"sku":"G7-12D2","price":401.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91vCWdMd1mL_ca218a94-9138-49e6-aec7-23f24373f6c2.jpg?v=1784374835"},{"product_id":"gravity-g8bd2-dual-8-powered-ported-subwoofer-enclosure","title":"Gravity G8BD2 Dual 8\" Powered Ported Subwoofer Enclosure","description":"\u003cp\u003eThe Gravity G8BD2 is a self-powered car subwoofer enclosure designed to add low-frequency output without requiring a separate external amplifier. It combines two 8-inch subwoofers, an integrated amplifier, and a ported enclosure in one assembled package. This approach can simplify a bass upgrade for vehicles where adding multiple separate components is less practical.\u003c\/p\u003e\u003cp\u003eRated at 600 watts RMS and 1,200 watts maximum power, the G8BD2 is intended for listeners seeking a more substantial bass foundation from a compact dual-subwoofer layout. Its listed 30 Hz to 1 kHz frequency response covers the low-frequency range commonly handled by a vehicle subwoofer system. The powered design keeps amplification and enclosure components together.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a ported configuration, which uses an opening in the cabinet to support low-frequency output. This design is paired with a listed enclosure air space of 3.5 cubic feet. The G8BD2 is specified as an enclosed powered subwoofer system for car-audio use.\u003c\/p\u003e\u003cp\u003eHeavy-duty MDF construction provides the enclosure structure for the dual-driver assembly. The cabinet measures 26.75 inches wide by 17 inches high by 14 inches deep, so measuring the intended cargo-area location before purchase is important. The listed product weight is 40 pounds.\u003c\/p\u003e\u003cp\u003eThe G8BD2 can be used with an existing car stereo as part of a complete vehicle-audio upgrade. Because it is an active enclosure, it still requires proper vehicle power, ground, turn-on, and audio-signal connections during installation. Confirm the available mounting space and have the installation planned around the vehicle's electrical and audio-system configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 8-Inch Drivers:\u003c\/strong\u003e Two compact subwoofers are built into one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplification:\u003c\/strong\u003e The enclosure is an active, powered subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Rating:\u003c\/strong\u003e Provides the listed continuous power rating for the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W Maximum Power:\u003c\/strong\u003e Provides the listed maximum power-handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted Cabinet:\u003c\/strong\u003e Uses a vented enclosure design for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty MDF Construction:\u003c\/strong\u003e Provides a rigid cabinet structure for the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G8BD2 combines two 8-inch subwoofers and integrated amplification in a heavy-duty MDF ported enclosure. Its listed cabinet dimensions are 26.75 x 17 x 14 inches, with a listed weight of 40 pounds. The system is specified with a single voice coil and 8-ohm DC resistance.\u003c\/p\u003e\u003cp\u003ePlan installation in a secure, ventilated vehicle location that accommodates the enclosure's full dimensions and allows access for wiring. A proper installation requires vehicle power, ground, remote turn-on, and an audio signal connection; the exact included accessories and connection types are not confirmed. Professional installation is advisable when vehicle wiring, signal integration, or secure mounting is needed.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626620543046,"sku":"G8BD2","price":225.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/pixelcut-export_c3e82955-da5b-4be6-b4cc-42b4a39105bc.png?v=1784374924"},{"product_id":"gravity-gr-10-0-10-farad-car-audio-stiffening-capacitor","title":"Gravity GR-10.0 10 Farad Car Audio Stiffening Capacitor","description":"\u003cp\u003eThe Gravity GR-10.0 is a 10.0-farad car-audio stiffening capacitor designed to support high-current aftermarket amplifier systems. It stores electrical energy for rapid release when an amplifier encounters brief, heavy demand. This can help reduce momentary voltage fluctuation in systems with demanding bass passages. It is intended as a supplemental component within a vehicle’s 12-volt audio electrical system.\u003c\/p\u003e\u003cp\u003eThis capacitor is suited to car, truck, motorcycle, RV, and ATV audio installations using powerful amplifiers and subwoofers. It is especially relevant where amplifier load can place additional demand on the vehicle charging system during musical peaks. The GR-10.0 uses a low-resistance capacitor design that can charge and discharge more quickly than a conventional battery. Its 10.0-farad capacitance provides a substantial reserve for short-duration electrical demand.\u003c\/p\u003e\u003cp\u003eA digital red voltage display provides a direct readout of system voltage at the capacitor. The unit also includes a red lightning LED and a blue LED lightning window for illuminated status styling. Chrome-plated battery-post terminals are specified for the main power connections. A built-in chrome power and ground distribution block is also listed for the capacitor assembly.\u003c\/p\u003e\u003cp\u003eThe GR-10.0 is rated for a 20V working voltage and a 24V surge voltage. Its specified operating-temperature range is -20°C to +105°C, supporting use in automotive environments. The listed equivalent series resistance is 0.0015 ohm. These electrical specifications make it appropriate for properly designed high-current mobile-audio wiring systems.\u003c\/p\u003e\u003cp\u003eSome GR-10.0 listings package the capacitor with the BGC0XLB 0-gauge amplifier installation kit. That configuration includes 0-gauge power and ground cable, an inline ANL fuse holder, a 150A fuse, turn-on wire, terminals, and installation accessories. The capacitor should be considered part of a complete power-delivery upgrade rather than a replacement for a properly maintained battery, alternator, wiring, and grounding system. Match the installation hardware and fuse protection to the complete audio system and vehicle requirements.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10.0-Farad Capacity:\u003c\/strong\u003e Stores supplemental energy for brief amplifier-demand peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow ESR:\u003c\/strong\u003e The listed 0.0015-ohm ESR supports rapid energy transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Display:\u003c\/strong\u003e Digital red display shows voltage at the capacitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20V Working Rating:\u003c\/strong\u003e Designed for automotive electrical-system voltage applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24V Surge Rating:\u003c\/strong\u003e Provides specified tolerance for short voltage surges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0-Gauge Kit Configuration:\u003c\/strong\u003e Select listings include a matching amplifier wiring kit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-10.0 combines a high-capacitance storage section with chrome-plated battery-post terminals and an integrated chrome power\/ground distribution block. Listed visual details include a red lightning LED, a blue LED lightning window, and a digital red voltage display. Its specified -20°C to +105°C operating range supports typical mobile-audio installation environments. The low 0.0015-ohm ESR specification is intended to support fast charging and discharge behavior.\u003c\/p\u003e\u003cp\u003eMount the capacitor securely in a protected location and use appropriately sized, fused high-current wiring for the complete amplifier system. In the listed GR-10.0 + BGC0XLB configuration, the included kit supplies 17 feet of 0-gauge power cable, 3 feet of 0-gauge ground cable, a 150A-fused inline ANL holder, and 17 feet of 18-gauge turn-on wire. Follow the supplied instructions and observe correct polarity when charging and connecting a capacitor. Professional installation is advisable when integrating high-current power wiring into a vehicle.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626873937990,"sku":"GR-10-0","price":127.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/a_265a178e-991a-4811-8ca8-a94b2317c159.webp?v=1784375062"},{"product_id":"gravity-gr-12pw-12-dual-4-ohm-car-subwoofer","title":"Gravity GR-12PW 12\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity GR-12PW is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. Its dual 4-ohm voice coil configuration provides wiring flexibility for matching a compatible mono or multi-channel amplifier. It is intended for listeners building or upgrading a system that needs stronger bass than typical full-range vehicle speakers can provide.\u003c\/p\u003e\u003cp\u003eWith a 600-watt RMS and 1,200-watt peak power rating, the GR-12PW is suited to amplification selected around its continuous power capability. Its stated 30 Hz to 2.5 kHz frequency response supports low-bass reproduction while allowing an external amplifier or processor to set the appropriate low-pass crossover. The 90 dB sensitivity rating indicates efficient output relative to input power.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed paper cone intended to keep the moving assembly responsive for bass playback. A high-roll foam surround supports cone travel while helping the driver reproduce lower frequencies. Together, these materials are designed for the demands of a dedicated automotive subwoofer installation.\u003c\/p\u003e\u003cp\u003eGravity specifies an advanced airflow cooling system to help manage heat during sustained use. Heat control is especially important when a subwoofer is driven near its rated continuous-power range. Proper gain setting and a clean amplifier signal remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe GR-12PW can be used as the bass section of a custom car audio system with an external amplifier, enclosure, wiring, and source signal. Its two 4-ohm voice coils can be wired in parallel for a 2-ohm nominal load or in series for an 8-ohm nominal load. Choose the enclosure, amplifier, and wiring arrangement according to the amplifier manufacturer's supported impedance and power ratings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to an aftermarket vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports series or parallel wiring options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Rating:\u003c\/strong\u003e Provides a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a lightweight cone material for responsive bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone movement during low-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage heat during extended operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-12PW combines a competition-grade pressed paper cone with a high-roll foam surround and an advanced airflow cooling system. This construction focuses on the moving parts and thermal management needed for a dedicated bass driver. The driver is a passive, wired subwoofer and requires external amplification.\u003c\/p\u003e\u003cp\u003eInstall the GR-12PW in a properly sized enclosure and use an amplifier that is stable at the final impedance created by the voice-coil wiring. Wire its coils in parallel only when the amplifier supports a 2-ohm load; series wiring produces an 8-ohm nominal load. Set amplifier gain carefully, use an appropriate low-pass crossover, and verify mounting clearance before choosing an enclosure.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627159707718,"sku":"GR-12PW","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/714J0GXmghL.jpg?v=1784375200"},{"product_id":"gravity-gr-20px-gr-800bc-car-audio-power-capacitor","title":"Gravity GR-20PX\/GR-800BC Car Audio Power Capacitor","description":"\u003cp\u003eThe Gravity GR-20PX\/GR-800BC is a car-audio power capacitor listed for use alongside amplifier-based vehicle sound systems. It is an electrical-system accessory rather than a head unit, speaker, or power amplifier. The supplied listing identifies it with a 600 AMP rating and a GR-800BC product designation.\u003c\/p\u003e\u003cp\u003eThis capacitor is aimed at installers building or updating a vehicle audio system that uses external amplification. It provides a dedicated power-storage component for a car-audio installation while adding a visible voltage display. The product is suited to systems where monitoring the electrical setup at the installation location is useful.\u003c\/p\u003e\u003cp\u003eIts appearance is designed to coordinate with custom car-audio installations. A black chrome case, blue LED lighting, and chrome-plated battery posts create a finished presentation in an amplifier rack or display-oriented trunk installation. The digital blue voltage display provides an at-a-glance readout.\u003c\/p\u003e\u003cp\u003eThe GR-20PX\/GR-800BC uses battery-post-style connections as listed, making it a component intended to be integrated into the vehicle's power wiring. Chrome-plated posts are a notable practical and visual detail. No wire gauge, fuse requirement, dimensions, or capacitance value was confirmed for this SKU and UPC combination.\u003c\/p\u003e\u003cp\u003eUse this Gravity capacitor as part of a planned car-audio electrical installation, with the rest of the system selected and wired appropriately for the vehicle and connected equipment. Its blue illumination and voltage display make it particularly appropriate where the installation will remain visible. Professional installation is a sensible option when configuring high-current vehicle power connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 AMP Rating:\u003c\/strong\u003e Listed current rating for this car-audio capacitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Voltage Display:\u003c\/strong\u003e Digital display provides a visible voltage readout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChrome-Plated Posts:\u003c\/strong\u003e Battery-post connections add a polished installation appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Chrome Case:\u003c\/strong\u003e Dark metallic enclosure complements custom audio layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Integrated blue lighting adds visual accent illumination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar-Audio Application:\u003c\/strong\u003e Listed as a power-storage capacitor for amplifier systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe listed design combines a black chrome case with chrome-plated battery posts, a digital blue voltage display, and blue LED lighting. These elements give the capacitor a coordinated appearance for visible car-audio installations. The round capacitor format is also reported by marketplace product data.\u003c\/p\u003e\u003cp\u003ePlan the capacitor's location as part of the amplifier power layout, with secure mounting and appropriately selected vehicle-grade wiring. Verify all wiring, protection, charging, and mounting requirements against the vehicle and connected equipment before installation. The confirmed listing data does not specify wire gauge, fuse size, mounting hardware, dimensions, or included accessories.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627494760518,"sku":"GR-20PX","price":160.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61SBJnb-nbL.jpg?v=1784375395"},{"product_id":"gravity-gr300-4-4-channel-class-ab-car-amplifier","title":"Gravity GR300.4 4-Channel Class AB Car Amplifier","description":"\u003cp\u003eThe Gravity GR300.4 is a four-channel Class AB car audio amplifier designed to add dedicated amplification to an upgraded speaker system. It can be used for front and rear door speakers, component speakers, or other full-range drivers in a 12-volt vehicle audio system. With four amplified channels, it offers a practical route beyond factory head-unit power.\u003c\/p\u003e\u003cp\u003eThis amplifier is rated for up to 300 watts per channel at 2 ohms and up to 150 watts per channel at 4 ohms, both specified at 1% THD. Its 2-ohm stereo stability gives installers flexibility when matching compatible speakers to the amplifier. The Class AB design is intended for full-range system applications where controlled, clean output is important.\u003c\/p\u003e\u003cp\u003eVariable high-pass and low-pass crossover controls help tailor the frequency range sent to connected speakers. The high-pass filter adjusts from 80 Hz to 1.2 kHz, while the low-pass filter adjusts from 50 Hz to 250 Hz. A variable bass boost of up to +12 dB at 50 Hz provides an additional tuning option when system design calls for more low-frequency emphasis.\u003c\/p\u003e\u003cp\u003eThe GR300.4 supports line-level and speaker-level inputs, allowing it to work with many aftermarket and factory-source systems. It also supports bridgeable and tri-mode operation for compatible system layouts. An included remote level-control knob provides a convenient way to adjust the assigned bass level from the listening position.\u003c\/p\u003e\u003cp\u003eProtection circuitry helps safeguard the amplifier against overload, thermal, and short-circuit conditions. Soft-start and muting functions are designed to reduce turn-on noise, while status indicators assist with system monitoring. The compact chassis can be integrated into a variety of vehicle installations when mounted with adequate ventilation and secure wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class AB Design:\u003c\/strong\u003e Powers a full front-and-rear speaker arrangement from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Stability:\u003c\/strong\u003e Supports compatible 2-ohm or 4-ohm stereo speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Lets installers direct appropriate frequencies to connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Boost Control:\u003c\/strong\u003e Adds up to +12 dB at 50 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Input Options:\u003c\/strong\u003e Accepts line-level and speaker-level audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Protection:\u003c\/strong\u003e Helps protect against overload, heat, and short circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR300.4 uses a compact amplifier chassis with chrome-plated RCA, power, and speaker terminals. Its Class AB circuit design includes high-current dual discrete drive stages, a MOSFET PWM power supply, soft-start operation, muting, and power\/protection indicators. These features support dependable daily use when the amplifier is installed and configured correctly.\u003c\/p\u003e\u003cp\u003eUse this amplifier in a negative-ground 12-volt vehicle electrical system and mount it securely in a dry, ventilated location. Match speaker wiring to the supported 2-ohm or 4-ohm stereo loads, set crossover points for the speakers being used, and connect either line-level or speaker-level inputs as appropriate for the source unit. The package includes the amplifier, remote bass control, and user manual.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627576385606,"sku":"GR-300-4","price":145.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71oOQyJ_FJL.jpg?v=1784375436"},{"product_id":"gravity-gr-6-0-6-farad-car-audio-stiffening-capacitor","title":"Gravity GR-6-0 6 Farad Car Audio Stiffening Capacitor","description":"\u003cp\u003eThe Gravity GR-6-0 is a 6 Farad car-audio stiffening capacitor designed to support an aftermarket amplifier’s power connection during brief, high-current demands. It serves as a supplemental energy reservoir near the amplifier rather than as a replacement for the vehicle battery or charging system. It is intended for systems where bass transients can contribute to short-term voltage drops.\u003c\/p\u003e\u003cp\u003eWhen an amplifier draws heavily during low-frequency music passages, voltage at the amplifier can temporarily fall if demand exceeds what the charging system can immediately supply. The GR-6-0 stores electrical energy and can discharge quickly to help support the power line through those brief demands. This makes it a practical addition for car-audio systems centered on subwoofers or other high-current amplification.\u003c\/p\u003e\u003cp\u003eThe capacitor uses a 6 Farad capacitance rating and is listed for car-audio use. Its low-resistance capacitor design is intended to charge from the vehicle electrical system and release stored energy rapidly when needed. Performance will still depend on the condition and capacity of the vehicle battery, alternator, wiring, and amplifier system.\u003c\/p\u003e\u003cp\u003eA digital blue voltage display provides a convenient view of system voltage at the capacitor. The GR-6-0 also incorporates a Lightning LED accent and chrome-plated battery-post terminals. These features make it suitable for installations where monitoring and visible presentation are both useful.\u003c\/p\u003e\u003cp\u003eThe GR-6-0 fits into an amplifier power upgrade path after proper power and ground wiring have been selected. It can be used in automotive audio applications and is also marketed for powersports-style installations such as motorcycles, ATVs, and snowmobiles. For sustained charging-system deficits, an appropriate battery or higher-output alternator may be required in addition to a capacitor.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 Farad Capacitance:\u003c\/strong\u003e Provides stored electrical energy for brief amplifier-demand peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Blue Voltage Display:\u003c\/strong\u003e Lets you monitor voltage at the capacitor location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChrome-Plated Battery Posts:\u003c\/strong\u003e Provide dedicated connections for power-system wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightning LED:\u003c\/strong\u003e Adds integrated visual illumination to a custom installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Charge and Discharge:\u003c\/strong\u003e Supports quick energy transfer during bass transients.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar-Audio Stiffening Design:\u003c\/strong\u003e Helps support amplifier power delivery during short voltage dips.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-6-0 uses a cylindrical capacitor housing with an integrated digital display, illuminated accent, and battery-post-style terminals. Its chrome-plated terminal hardware is designed for secure electrical connections, while the display provides at-a-glance voltage monitoring. The overall design is intended for visible aftermarket audio and powersports installations.\u003c\/p\u003e\u003cp\u003eInstall the capacitor close to the amplifier it is intended to support, following the vehicle, amplifier, and capacitor wiring instructions. Connect it within the amplifier power system using correctly sized fused power and ground wiring, and charge it through the specified safe pre-charge procedure before direct connection. A capacitor can assist with brief transients, but it does not correct an undersized alternator, weak battery, poor ground, or inadequate wiring.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627756347462,"sku":"GR-6-0","price":97.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/a_31ea7e9b-0605-40be-ae9a-02ab854e5fde.webp?v=1784375601"},{"product_id":"gravity-gr-600bc-600a-car-audio-capacitor","title":"Gravity GR-600BC 600A Car Audio Capacitor","description":"\u003cp\u003eThe Gravity GR-600BC is a 600A car audio battery capacitor designed to provide supplemental electrical support for amplifier-equipped vehicle audio systems. It stores energy and can release it quickly during brief periods of elevated current demand. This makes it a focused accessory for systems where bass transients place additional demand on the vehicle electrical system.\u003c\/p\u003e\u003cp\u003eThis capacitor is intended for car audio enthusiasts building or updating an amplified system, particularly one centered on subwoofers or bass-heavy playback. It is not a replacement for the vehicle battery, alternator, or proper power wiring. Instead, it is used as a supporting component within a correctly designed charging and audio system.\u003c\/p\u003e\u003cp\u003eThe GR-600BC carries a 600A rating and uses a capacitor-based energy-storage design rather than a conventional battery design. Its role is to provide nearby stored energy for short-duration amplifier demand. System results depend on the amplifier load, vehicle charging system, battery condition, wiring, grounds, and installation quality.\u003c\/p\u003e\u003cp\u003eA digital blue voltage display provides at-a-glance monitoring of system voltage at the capacitor. This is useful when setting up or checking an audio system, since voltage behavior can help identify when the electrical system needs attention. Blue LED illumination adds a visible accent for installations where the capacitor is mounted in view.\u003c\/p\u003e\u003cp\u003eThe GR-600BC fits as an accessory in a dedicated amplifier power path, rather than as a standalone audio component. It can complement an existing amplifier, subwoofer, and upgraded power-wire installation when specified appropriately for the vehicle. For high-demand systems, evaluate the alternator, battery, grounding, fusing, and cable sizing as part of the complete upgrade plan.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600A Rating:\u003c\/strong\u003e Provides a stated 600A rating for car audio electrical-support applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCar Audio Capacitor:\u003c\/strong\u003e Stores electrical energy for short-duration amplifier demand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Blue Voltage Display:\u003c\/strong\u003e Lets the installer view voltage at the capacitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Illumination:\u003c\/strong\u003e Adds visible lighting to a custom audio installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChrome-Plated Posts:\u003c\/strong\u003e Provides dedicated connection points with a chrome-plated finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Chrome Case:\u003c\/strong\u003e Gives the capacitor a finished appearance for visible mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-600BC uses a black chrome case, chrome-plated battery posts, a digital blue voltage display, and blue LED illumination. These elements combine functional connection and voltage-monitoring features with an appearance suited to exposed amplifier racks or custom vehicle audio installations. The published product information identifies it as a Gravity car audio capacitor with a 600A rating.\u003c\/p\u003e\u003cp\u003eInstall the capacitor as part of a properly fused amplifier power system and follow the polarity markings and vehicle-specific wiring requirements. Mount it securely in a protected location, keep power connections tight, and use suitable cable, terminals, and fusing for the connected amplifier system. A qualified car-audio installer should be used when charging-system condition, cable sizing, or connection routing is uncertain.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627783118918,"sku":"GR-600BC","price":171.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/a_fa34af88-6dab-423f-9fbf-be7a2432e51e.webp?v=1784375637"},{"product_id":"gravity-gr-bass-digital-bass-restoration-processor","title":"Gravity GR-BASS Digital Bass Restoration Processor","description":"\u003cp\u003eThe Gravity GR-BASS is a digital bass restoration processor for aftermarket car audio systems. It is designed to recreate and inject low-frequency information into the signal path, helping restore bass detail that may be reduced in certain recordings or source material. This makes it a focused upgrade for listeners who want more control over low-frequency response without changing their amplifiers or speakers.\u003c\/p\u003e\u003cp\u003eRather than functioning as an amplifier, the GR-BASS processes an existing audio signal before it reaches the rest of the system. Its bass restoration and equalization functions are intended to add low-end presence while allowing the user to tailor the effect to the system and music being played. Adjustable frequency, width, and level controls provide a practical way to tune the bass effect instead of applying a fixed boost.\u003c\/p\u003e\u003cp\u003eThe processor supports up to 15V RMS input and provides up to 13.5V peak output. Its specified 10 Hz to 100 kHz frequency response, 0.003% THD rating, and high input-noise rejection are intended to support clean signal handling within a car audio installation. A high-headroom PWM power supply supports stable operation in a vehicle electrical system.\u003c\/p\u003e\u003cp\u003eA lighted bass restoration display provides output-level feedback, while the included dash-mount remote control lets the driver adjust bass level from the front seat. This is useful when changing between recordings with different low-frequency content or when adapting the system for different listening preferences. The remote is designed for convenient in-car access rather than requiring adjustment at the processor itself.\u003c\/p\u003e\u003cp\u003eThe GR-BASS is suited to systems using an aftermarket head unit, amplifier, and subwoofer setup, as well as installations where the owner wants to add bass restoration as a separate signal-processing stage. Its compact 9-inch-wide chassis can be mounted in many common vehicle locations when protected from moisture and heat. Careful level matching and conservative adjustment are recommended to maintain balanced system performance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Recreates low-frequency information within the audio signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bass Controls:\u003c\/strong\u003e Frequency, width, and level settings tailor the restoration effect.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides convenient bass-level adjustment from the driver’s seat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighted Output Display:\u003c\/strong\u003e Shows bass restoration output level up to 13.5V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Headroom PWM Supply:\u003c\/strong\u003e Supports stable signal-processing operation in vehicle applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Distortion Signal Path:\u003c\/strong\u003e Rated at 0.003% total harmonic distortion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-BASS uses a compact processor format measuring 9 inches wide by 6.5 inches deep by 2.75 inches high. Its documented design includes gold-plated contacts, illuminated controls, a lighted bass restoration display, and a high-headroom PWM power supply. The compact footprint helps it fit into custom audio installations while retaining accessible adjustment controls.\u003c\/p\u003e\u003cp\u003eInstall the GR-BASS as a signal-processing component in an aftermarket car audio system, with appropriate power, ground, fuse protection, and audio-signal connections. Use the included dash-mount remote where it can be safely reached by the driver, and set input and output levels carefully to avoid overdriving downstream equipment. The processor draws 150 mA and has a recommended 3A fuse rating.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45628060958790,"sku":"GR-BASS","price":63.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ks0sQmlML.jpg?v=1784375794"},{"product_id":"gravity-gr-bass2-0-digital-bass-processor","title":"Gravity GR-BASS2.0 Digital Bass Processor","description":"\u003cp\u003eThe Gravity GR-BASS2.0 is a digital bass processor designed to restore and enhance low-frequency information in a vehicle audio signal. It is intended for factory or aftermarket systems that need more defined bass response without changing the source unit. By working in the signal path, it gives an installer a dedicated way to shape bass before the signal reaches downstream equipment.\u003c\/p\u003e\u003cp\u003eThis processor is suited to listeners who want stronger low-end presence while retaining control over the character of the bass. Its bass restoration and bass maximization functions are designed to add back low-frequency content that may be reduced in the original recording or playback chain. The result is a system tuning tool focused on fuller, more controlled bass reproduction.\u003c\/p\u003e\u003cp\u003eThe GR-BASS2.0 incorporates a bass equalization circuit and a PFM subsonic filter. The filter helps reduce extremely low-frequency content that can use unnecessary subwoofer excursion and amplifier power. This makes the processor a practical option for systems using subwoofers where bass level and low-frequency management need separate adjustment.\u003c\/p\u003e\u003cp\u003eWith a maximum input level of 15V RMS and a maximum output level of 13.5V peak, the processor is specified for use in higher-voltage car-audio signal paths. Its stated 10 Hz to 100 kHz frequency response, 0.003% THD rating, and greater-than-60 dB balanced input noise rejection support clean signal handling. Gold-plated contacts are used to support dependable signal transfer at the connections.\u003c\/p\u003e\u003cp\u003eA dash-mount remote control is included for convenient bass adjustment from the front of the vehicle. The main unit also features illuminated controls, an illuminated logo, and a bass maximizer indicator for easier visibility in low-light installations. Its compact 9-inch-wide chassis can be integrated as part of a bass-focused upgrade alongside compatible source, amplifier, and subwoofer components.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Recreates low-frequency information within the audio signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Maximizer Circuit:\u003c\/strong\u003e Provides dedicated processing for stronger bass presence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Helps limit unwanted ultra-low-frequency content.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Allows bass-level adjustment from the driver area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Signal Capability:\u003c\/strong\u003e Accepts input signals up to 15V RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIlluminated Controls:\u003c\/strong\u003e Improve control visibility in low-light vehicle interiors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-BASS2.0 uses a compact chassis measuring 9 inches wide, 6-1\/2 inches deep, and 2-3\/4 inches high. Its design includes gold-plated contacts, illuminated control knobs, an illuminated logo, and a bass maximizer indicator. A high-headroom PWM power supply is specified for the processor.\u003c\/p\u003e\u003cp\u003eInstall the processor in the system signal path and leave access to its controls for initial tuning. The included dash-mount remote is intended to be positioned where bass adjustment can be made conveniently while seated in the vehicle. Use a properly fused installation, following the product instructions and the requirements of the connected audio system.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45628134555718,"sku":"GR-BASS2-0","price":77.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81dQOBvQ8IL.jpg?v=1784375835"},{"product_id":"gravity-gr-eqp11-1-2-din-4-band-car-parametric-equalizer","title":"Gravity GR-EQP11 1\/2-DIN 4-Band Car Parametric Equalizer","description":"\u003cp\u003eThe Gravity GR-EQP11 is a 1\/2-DIN car-audio signal processor that combines four-band parametric equalization with dedicated front, rear, and subwoofer outputs. It is designed for systems that need more control over tonal balance and subwoofer integration than a head unit’s basic tone controls can provide. A master volume control supports output levels up to 9 volts RMS.\u003c\/p\u003e\u003cp\u003eThis equalizer is suited to vehicle owners and installers building an amplified system with separate full-range and subwoofer signal paths. Its front, rear, and sub outputs provide a practical way to route processed signal to compatible amplifiers. The AUX\/MAIN input selector also supports choosing between the unit’s available input sources.\u003c\/p\u003e\u003cp\u003eThe GR-EQP11 uses a four-band parametric EQ section with up to 12 dB of boost or cut. Each band has a specified bandwidth, while the high-frequency section includes shelving adjustment. These controls allow more deliberate correction or tailoring of the system’s frequency balance.\u003c\/p\u003e\u003cp\u003eFor bass-system setup, the GR-EQP11 includes separate subwoofer level control and subwoofer frequency selectors. This allows the subwoofer channel to be adjusted independently from the front and rear outputs. The result is a more manageable way to balance low-frequency output with the rest of the system.\u003c\/p\u003e\u003cp\u003eAn onboard 30-volt bipolar switching power supply supports the unit’s signal-processing section, and gold-plated RCA input and output connectors are provided for signal connections. Night illumination helps make the controls easier to locate in low-light conditions. Its compact 1\/2-DIN format is intended for custom dash, console, or panel installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 9V RMS Output:\u003c\/strong\u003e Provides a higher-voltage preamp signal for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Band Parametric EQ:\u003c\/strong\u003e Lets you target and adjust multiple parts of the audio spectrum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 dB Boost\/Cut:\u003c\/strong\u003e Provides meaningful adjustment range for each EQ band.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront, Rear And Sub Outputs:\u003c\/strong\u003e Routes processed signal to separate amplifier channels or zones.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Level And Frequency Controls:\u003c\/strong\u003e Helps balance bass output within the overall system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNight Illumination:\u003c\/strong\u003e Makes the control panel easier to use after dark.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-EQP11 has a black metal enclosure and a compact 1\/2-DIN form factor. Its control layout is designed around master level, equalization, and subwoofer adjustment functions. Gold-plated RCA connectors are used for the signal inputs and outputs.\u003c\/p\u003e\u003cp\u003eInstall the unit in a secure 1\/2-DIN-compatible custom location with access to its controls, then connect it to compatible RCA-level source and amplifier connections. Use the AUX\/MAIN selector to choose the desired input and set the master, EQ, and subwoofer controls gradually during system tuning. Installation hardware, wiring, and included accessories are not confirmed in the available product information.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45628896182342,"sku":"GR-EQP11","price":75.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81SWoJyAnUL.jpg?v=1784376339"},{"product_id":"gravity-grwf10-10-powered-under-seat-subwoofer","title":"Gravity GRWF10 10\" Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe Gravity GRWF10 is a compact 10-inch powered subwoofer designed to add low-frequency output to a vehicle audio system without requiring a separate amplifier enclosure in the trunk. Its low-profile under-seat format is intended for cars, trucks, and SUVs where available cargo space is limited. The integrated design combines the subwoofer enclosure and amplification in one wired unit.\u003c\/p\u003e\u003cp\u003eThis model is a practical upgrade for listeners who want more bass presence from a factory or aftermarket speaker system. It is intended to supplement full-range speakers rather than replace them. Its compact enclosure makes it especially suited to installations where a conventional subwoofer box would be impractical.\u003c\/p\u003e\u003cp\u003eThe GRWF10 uses a 10-inch driver in an active, enclosed powered-subwoofer configuration. Published product data identifies a 2-ohm subwoofer load, a 20 Hz to 150 Hz frequency-response range, and a signal-to-noise ratio above 90 dB. A built-in low-pass filter helps limit the unit to the bass range it is designed to reproduce.\u003c\/p\u003e\u003cp\u003eSystem-tuning controls include adjustable bass boost and phase-shift adjustment. The bass boost can increase low-frequency emphasis, while phase adjustment can help the subwoofer blend more smoothly with the vehicle's main speakers. A fixed 20 Hz subsonic filter is also listed in published technical data.\u003c\/p\u003e\u003cp\u003eThe GRWF10 supports wired signal connections and is listed with high-level input capability for integration with systems that use speaker-level outputs. Its automatic power on\/off function is intended for high-level connections, reducing the need for a separate turn-on arrangement in compatible installations. For a complete upgrade, it should be professionally wired to the vehicle's electrical system and secured in a location with adequate clearance and ventilation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Design:\u003c\/strong\u003e Combines a 10-inch subwoofer and built-in amplifier in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnder-Seat Profile:\u003c\/strong\u003e Fits applications where trunk-mounted bass systems are not preferred.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Auto Turn-On:\u003c\/strong\u003e Supports automatic activation when using high-level signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets the bass frequency range be tailored to the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Provides adjustable low-frequency emphasis for personal tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Shift Control:\u003c\/strong\u003e Helps align bass output with the rest of the vehicle audio system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GRWF10 is listed as an active enclosed subwoofer with an aluminum housing and a rectangular, low-profile form factor. Its compact 15 x 11.4 x 3-inch unit dimensions are designed for under-seat or other space-conscious vehicle mounting locations. A bi-color power-status LED provides a visible operating indication.\u003c\/p\u003e\u003cp\u003eBefore purchase, measure the intended mounting area for clearance around the 15 x 11.4 x 3-inch enclosure and allow room for wiring and ventilation. Installation requires a wired vehicle-audio connection and power wiring; high-level input capability can help it integrate with factory systems that do not provide dedicated RCA preamp outputs. Secure the enclosure firmly rather than leaving it loose beneath a seat, and set gain, low-pass filter, bass boost, and phase controls after installation.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45629043376198,"sku":"GRWF10","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71HaZ1-NX8L.jpg?v=1784376420"},{"product_id":"gravity-gsc-w12p-12-inch-powered-slim-subwoofer","title":"Gravity GSC-W12P 12-Inch Powered Slim Subwoofer","description":"\u003cp\u003eThe Gravity GSC-W12P is a self-powered 12-inch subwoofer enclosure designed to add low-frequency output without requiring a separate subwoofer amplifier. Its slim, compact enclosure is intended for vehicles where conventional large subwoofer boxes are impractical. With the amplifier integrated into the enclosure, it provides a simplified path to adding bass in cars, trucks, and SUVs.\u003c\/p\u003e\u003cp\u003eRated at 600 watts RMS and 1200 watts peak power, the GSC-W12P is built for listeners who want stronger bass presence from a compact installation. Its specified 40Hz to 200Hz frequency response focuses on the low-frequency range used for bass reinforcement. The adjustable controls allow the subwoofer output to be blended with factory or aftermarket speakers.\u003c\/p\u003e\u003cp\u003eA Darlington Class A\/B amplifier is built into the enclosure, eliminating the need to select and mount a separate external amplifier. The variable low-pass filter operates from 40Hz to 200Hz and uses a stated ±12dB-per-octave slope. This lets the installer limit higher bass frequencies so the enclosure works more naturally with the vehicle's main speakers.\u003c\/p\u003e\u003cp\u003eThe GSC-W12P supports both low-level RCA and high-level speaker-level connections. This flexibility is useful for aftermarket receivers with RCA preamp outputs as well as factory audio systems that do not provide them. An included external bass-level remote gives the driver a convenient way to adjust subwoofer level from the seating position.\u003c\/p\u003e\u003cp\u003eAdditional tuning includes variable phase adjustment from 0 to 180 degrees and bass boost adjustment from 0 to 12dB. These settings can help align bass output with the rest of the vehicle audio system after installation. The GSC-W12P is a practical all-in-one bass upgrade for compact mounting locations, including under-seat or trunk applications where its dimensions permit secure placement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Powered Enclosure:\u003c\/strong\u003e Combines a subwoofer and built-in amplifier in one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Power:\u003c\/strong\u003e Provides continuous power capability for bass reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Pass Crossover:\u003c\/strong\u003e Adjustable 40Hz to 200Hz range helps match main speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Support:\u003c\/strong\u003e Accepts RCA low-level and high-level speaker connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Adjustment:\u003c\/strong\u003e Variable 0 to 180 degree control supports system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Bass Remote:\u003c\/strong\u003e Lets the driver adjust bass level conveniently.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GSC-W12P uses a slim, self-contained active-enclosure design measuring 15.85 x 21.75 x 5.85 inches. Gravity's available technical details do not specify the enclosure material, but the unit is documented as a compact powered subwoofer enclosure with the amplifier integrated into the assembly. Its form factor is intended for space-conscious vehicle installations rather than a separate subwoofer-and-amplifier layout.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a location with adequate clearance and ventilation, such as a suitable under-seat area or trunk space. Connect it through the RCA low-level input when the source unit has preamp outputs, or use the high-level input with compatible factory speaker wiring. Set input level, low-pass filter, phase, and bass boost gradually after installation, then use the included remote to make normal listening-level adjustments.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45629125034054,"sku":"GSC-W12P","price":230.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81Byg63krAL.jpg?v=1784376465"},{"product_id":"gravity-gw-10d2-10-dual-voice-coil-car-subwoofer","title":"Gravity GW-10D2 10\" Dual Voice Coil Car Subwoofer","description":"\u003cp\u003eThe Gravity GW-10D2 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. It is intended for listeners building a bass-focused upgrade rather than relying on full-range speakers alone. With a published 1,000-watt RMS rating and 2,000-watt peak rating, it is suited to systems with appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eThis subwoofer uses a dual voice coil configuration, giving installers wiring flexibility when matching the speaker to a compatible mono amplifier. The available product information identifies the coils as 4 ohms each. Final system impedance depends on whether the coils are wired in series or parallel and should be confirmed against the amplifier's supported load.\u003c\/p\u003e\u003cp\u003eThe GW-10D2 uses a pressed paper cone with a high-roll foam surround. This combination is designed to support cone movement while maintaining the durable construction needed for mobile-audio use. Its listed frequency response of 30 Hz to 500 Hz covers the low-bass and upper-bass range normally assigned to a subwoofer.\u003c\/p\u003e\u003cp\u003eAn airflow cooling design is listed to help manage heat during extended operation. Thermal management is especially important when a subwoofer is used near its continuous power rating. Proper gain setting and a clean amplifier signal remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe GW-10D2 can serve as the bass foundation of a single-subwoofer system or as part of a multi-subwoofer installation. It requires a suitable enclosure, amplifier, wiring, and installation hardware, which are not identified as included. Choose an enclosure and amplifier configuration based on the vehicle, available space, and the final impedance created by the voice-coil wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated low-frequency reproduction for an aftermarket car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Rating:\u003c\/strong\u003e Supports continuous-power system designs with a properly matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W Peak Rating:\u003c\/strong\u003e Indicates short-duration maximum power handling as published.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows series or parallel wiring options for compatible amplifier loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Forms the primary moving surface for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during sustained playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GW-10D2 combines a competition-grade pressed paper cone with a high-roll foam surround. Its design also includes an airflow cooling system intended to support operation during demanding listening sessions. The published sensitivity is 87 dB, and the stated frequency response is 30 Hz to 500 Hz.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in an enclosure designed for the driver and securely mount it in the vehicle. Use an external amplifier whose power and minimum stable impedance are appropriate for the final dual-voice-coil wiring configuration. An enclosure, amplifier, wiring, and mounting hardware are required for a complete installation and are not listed as included.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45629378428998,"sku":"GW10D2","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_bdf61b75-b2a7-4039-b128-bb8eff9edcb0.webp?v=1784376589"},{"product_id":"gravity-gw-10d4-10-dual-4-ohm-car-audio-subwoofer","title":"Gravity GW-10D4 10\" Dual 4-Ohm Car Audio Subwoofer","description":"\u003cp\u003eThe Gravity GW-10D4 is a 10-inch component car-audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. It is intended for listeners building or upgrading a system that needs bass reproduction beyond what smaller full-range speakers typically provide. Its single-subwoofer format makes it suitable for custom enclosure projects and systems where space is limited.\u003c\/p\u003e\u003cp\u003eThis model uses a dual 4-ohm voice-coil configuration, giving an installer wiring flexibility when matching the subwoofer to a compatible amplifier. The rated continuous power handling is 1000 watts RMS, with a 2000-watt peak rating. Careful amplifier selection and gain setting are important for using its power capability appropriately.\u003c\/p\u003e\u003cp\u003eThe GW-10D4 is specified for a 30 Hz to 500 Hz frequency-response range and an 87 dB sensitivity rating. Its performance focus is on the lower registers that provide weight and impact in music. A properly configured subwoofer enclosure, crossover, and amplifier setup will determine how it integrates with the rest of the vehicle audio system.\u003c\/p\u003e\u003cp\u003eGravity builds the GW-10D4 around a competition-grade pressed paper cone and a high-roll foam surround. This material combination is designed to support controlled cone movement while providing durability in a high-output subwoofer application. The subwoofer also uses a high-flux motor structure to support its bass-focused design.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling design is part of the GW-10D4 construction. This feature is intended to help manage heat during sustained playback. The result is a component subwoofer suited to enthusiasts who want to add a dedicated bass driver to a compatible amplified car-audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Compact bass-driver size for custom vehicle audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W RMS Rating:\u003c\/strong\u003e Supports sustained power handling in properly matched systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000W Peak Rating:\u003c\/strong\u003e Indicates short-duration maximum power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Competition-grade cone material supports bass-focused performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during extended operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GW-10D4 combines a pressed paper cone, high-roll foam surround, high-flux motor, and airflow cooling design. These elements are intended for a durable, bass-oriented component subwoofer build. The 10-inch driver format is designed for installation in a separate, compatible enclosure rather than as a self-powered speaker system.\u003c\/p\u003e\u003cp\u003eUse this subwoofer with an external amplifier that is compatible with its dual 4-ohm voice-coil configuration and power ratings. The final load presented to the amplifier depends on how the voice coils are wired, so wiring should be planned around the amplifier's supported impedance range. Confirm enclosure dimensions, mounting requirements, and system crossover settings before installation, as mounting depth and cutout specifications were not confirmed.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45629509009478,"sku":"GW10D4","price":200.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_987b1ae2-dff8-4c89-8520-67764fa83134.webp?v=1784376648"},{"product_id":"gravity-gw12d4-12-dual-4-ohm-car-subwoofer","title":"Gravity GW12D4 12\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity GW12D4 is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. It is intended for listeners who want deeper bass than full-range door or rear-deck speakers can provide. Its dual 4-ohm voice-coil design gives system builders wiring flexibility when matching a compatible amplifier.\u003c\/p\u003e\u003cp\u003eWith a published 1,500-watt RMS power rating and 3,000-watt peak power rating, the GW12D4 is built for high-power bass applications. The 30 Hz to 500 Hz frequency-response specification focuses its role on the lower portion of the audio spectrum. An 85 dB sensitivity rating is published for this model.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed paper cone to produce bass output while maintaining a purpose-built mobile-audio design. Its high-roll foam surround supports cone movement and is intended to provide a durable interface between the cone and frame. These materials are paired for systems where bass impact and controlled low-frequency reproduction are priorities.\u003c\/p\u003e\u003cp\u003eGravity specifies an advanced airflow cooling system for the GW12D4. This design is intended to help manage heat during extended playback at higher power levels. Proper gain setting and amplifier matching remain important for helping the subwoofer operate within its published power-handling range.\u003c\/p\u003e\u003cp\u003eThe GW12D4 can be used in a custom enclosure as part of a bass-focused vehicle upgrade. Its dual 4-ohm voice coils can be wired to suit an amplifier that supports the resulting load. Select an enclosure, amplifier, wiring, and protection hardware appropriate for the vehicle and the final system impedance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated low-frequency reinforcement for car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500W RMS Rating:\u003c\/strong\u003e Supports high-power amplifier matching when correctly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Offers series or parallel wiring flexibility for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a competition-grade cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Foam Surround:\u003c\/strong\u003e Supports cone travel while contributing to durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling System:\u003c\/strong\u003e Helps manage heat during sustained high-output listening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GW12D4 combines a competition-grade pressed paper cone with a high-roll foam surround and an advanced airflow cooling system. Its design is focused on car-audio bass duty rather than full-range playback. The published response range of 30 Hz to 500 Hz reflects its intended low-frequency role.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in an enclosure designed for a 12-inch driver and securely mount it according to the enclosure manufacturer's instructions. Because it has dual 4-ohm voice coils, confirm the final wired impedance before connecting an amplifier; the coils can produce a 2-ohm parallel load or an 8-ohm series load. Use an amplifier whose RMS output and stable impedance range are appropriate for the completed system, and set gains carefully.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45629664133190,"sku":"GW12D4","price":257.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_e4b5ad5d-1b46-414d-a49b-10b3499229af.jpg?v=1784376730"},{"product_id":"gravity-mgr3-weatherproof-marine-stereo-receiver","title":"Gravity MGR3 Weatherproof Marine Stereo Receiver","description":"\u003cp\u003eThe Gravity MGR3 is a compact weatherproof marine stereo receiver for boats, ATVs, motorcycles, RVs, and other outdoor-focused audio installations. It combines source selection, radio reception, Bluetooth streaming, and four-channel speaker output in one dashboard-style unit. This makes it a practical replacement or upgrade for systems that need flexible playback options in exposed environments.\u003c\/p\u003e\u003cp\u003eIts listed 200-watt maximum output is configured as 50 watts across each of four channels, allowing it to operate a basic multi-speaker setup without a separate amplifier. Bluetooth provides cable-free music streaming from a compatible phone or media device, while USB, SD, AUX, and FM radio offer alternate listening sources. The front-panel controls and included remote provide two ways to manage playback and sound settings.\u003c\/p\u003e\u003cp\u003eThe MGR3 is designed for outdoor and marine-oriented use, with IPX5 water resistance and a dustproof construction. Its compact, square-faced layout helps it fit applications where conventional full-size vehicle receivers may not be suitable. Electronic anti-shock support is also listed to help maintain more consistent playback in vibration-prone applications.\u003c\/p\u003e\u003cp\u003eSound adjustment is handled through the built-in equalizer, with Rock, Pop, Classical, and Flat presets available. RCA audio signal output supports connection to compatible external audio equipment, including an amplifier or subwoofer setup. That gives the receiver a straightforward path for expanding a basic speaker system over time.\u003c\/p\u003e\u003cp\u003eWith its multiple playback formats and weather-oriented design, the MGR3 suits recreational vehicles that need music access without relying on a single source. It is especially appropriate for installations where Bluetooth convenience, FM listening, and removable-media playback are all useful. Confirm mounting clearance, wiring needs, antenna requirements, and speaker compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Listed 50W x 4 output supports a basic multi-speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Streaming:\u003c\/strong\u003e Plays audio wirelessly from compatible Bluetooth-enabled devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Source Playback:\u003c\/strong\u003e Supports USB, SD, AUX, and FM listening options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Built for wet outdoor and marine-oriented environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Signal Output:\u003c\/strong\u003e Enables connection to compatible external audio components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Remote Control:\u003c\/strong\u003e Provides convenient playback and settings control from a distance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MGR3 uses a compact black front panel with an integrated display, tactile source and tuning controls, and a rotary power\/selection control. Its weatherproof, dustproof design is intended for installations exposed to outdoor conditions, while the rear chassis uses a finned metal housing. The receiver is listed with IPX5 water resistance; protect connections and media ports appropriately in wet installations.\u003c\/p\u003e\u003cp\u003eAllow approximately 4.33 inches at the front face, 3.92 inches of mounting depth, and 2.89 inches for the chassis profile when planning placement. Connect compatible speakers to the four-channel output, connect an FM antenna for radio use, and use the RCA signal output only with compatible external equipment. Use the USB, SD, AUX, Bluetooth, and FM modes according to the playback source available in the vehicle or vessel.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45631050809414,"sku":"MGR3","price":187.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71JBpxIRt4L.jpg?v=1784377586"},{"product_id":"gravity-mgr5-marine-digital-media-receiver","title":"Gravity MGR5 Marine Digital Media Receiver","description":"\u003cp\u003eThe Gravity MGR5 is a 12V marine digital media receiver designed to bring music, radio, and compatible media playback to boats and other exposed-vehicle applications. It combines Bluetooth streaming, USB, SD card, AUX, and FM radio sources in one compact receiver. Its 4.1-inch LCD display provides a central interface for source selection and video playback.\u003c\/p\u003e\u003cp\u003eThis receiver is intended for boat, ATV, motorcycle, RV, and car installations where a weather-resistant entertainment source is needed. The front-panel controls, illuminated buttons, and included remote help make source and volume adjustments more convenient in varied lighting conditions. Bluetooth support allows a compatible phone or media device to stream audio wirelessly.\u003c\/p\u003e\u003cp\u003eThe MGR5 is rated at 200 watts maximum output, specified as 50 watts across four channels. Dedicated subwoofer level controls allow the bass output to be adjusted from the receiver, while built-in equalizer presets provide quick tonal changes. This makes it suitable for systems using four speaker channels and, where applicable, a compatible amplified subwoofer setup.\u003c\/p\u003e\u003cp\u003eFor media flexibility, the receiver supports USB storage, SD cards, an auxiliary input, Bluetooth audio streaming, and FM radio. The LCD screen also supports video playback from compatible media. Physical controls include a rotary power, select, and volume control along with dedicated source, tuning, menu, and playback buttons.\u003c\/p\u003e\u003cp\u003eIts IPX5 water-resistance rating and multi-color button illumination suit marine and powersports environments where splashes, dust, and low-light operation are considerations. The receiver uses a 12V DC electrical system and includes a wiring harness for installation. It can serve as a replacement media receiver or as the source unit for a new multi-speaker marine or recreational-vehicle audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4.1-Inch LCD Display:\u003c\/strong\u003e Provides a clear interface for receiver controls and compatible video playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth Audio:\u003c\/strong\u003e Streams music wirelessly from compatible Bluetooth-enabled devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Media Sources:\u003c\/strong\u003e Supports USB, SD card, AUX input, and FM radio playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Delivers up to 200 watts maximum output, rated 50 watts by four channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Level Control:\u003c\/strong\u003e Lets you adjust subwoofer output level directly from the receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Adds protection for splash-prone marine and outdoor vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MGR5 combines a compact receiver chassis with a 4.1-inch LCD display, tactile front controls, and multi-color illuminated buttons. Its weather-resistant construction is rated IPX5 for exposure to splashes and light rain, rather than submersion. The design is intended for marine, powersports, RV, and automotive environments using 12V DC electrical systems.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation using the listed approximate front-panel width, chassis height, and chassis depth. Connect the supplied harness to constant 12V power, accessory power, ground, speaker leads, and any applicable remote-turn-on connection; disconnect vehicle power before wiring. Use the unit as a standalone four-channel receiver or as the source component in a system that includes compatible external amplification and a subwoofer.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45631133679686,"sku":"MGR5","price":261.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91LKYODomYL.jpg?v=1784377623"},{"product_id":"gravity-sgr574-5x7-6x8-4-way-coaxial-car-speakers","title":"Gravity SGR574 5x7\/6x8 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity SGR574 is a pair of 4-way full-range car speakers designed for vehicles using 5x7-inch or 6x8-inch speaker locations. They provide a practical replacement option for worn or basic factory speakers while retaining a conventional 4-ohm load. The coaxial layout places multiple drivers in each speaker assembly to reproduce a broad portion of the audible range from one mounting location.\u003c\/p\u003e\u003cp\u003eWith a stated frequency response of 105Hz to 20kHz, the SGR574 is intended for everyday music listening, spoken-word playback, and general car-audio upgrades. Its 85 dB sensitivity rating and 4-ohm impedance make it suitable for use with compatible factory radios or aftermarket amplification. The 300-watt peak-power specification describes short-duration power handling rather than a continuous RMS rating.\u003c\/p\u003e\u003cp\u003eEach speaker uses a silver alpha cellulose cone and a moisture-resistant rubber surround. This combination is intended to support regular automotive use where temperature and humidity can vary. A stamped steel basket provides the structural frame for the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe 4-way design includes midrange and high-frequency elements in addition to the main cone driver. Gravity specifies 28 mm PEI midrange and tweeter components, along with a neo-mylar soft-dome tweeter designation. This arrangement is intended to distribute different portions of the audio range across multiple driver elements.\u003c\/p\u003e\u003cp\u003eThe SGR574 is suited to a straightforward front- or rear-speaker upgrade where a vehicle accepts 5x7-inch or 6x8-inch speakers. Spade terminals support conventional speaker-wire connections, though vehicle-specific harness adapters may be useful depending on the factory wiring. For systems needing stronger low-frequency output below the speaker's rated range, these speakers can be paired with a properly configured subwoofer system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5x7\/6x8 Fitment:\u003c\/strong\u003e Designed for common oval factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple driver elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Peak Handling:\u003c\/strong\u003e Supports stated short-duration peak power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver Alpha Cellulose Cone:\u003c\/strong\u003e Provides the main cone-driver construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpade Terminals:\u003c\/strong\u003e Allow conventional speaker-wire connections during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR574 uses silver alpha cellulose cones, moisture-resistant rubber surrounds, and an anti-resonant stamped steel basket. Its listed 6.5-ounce magnet and 25 mm voice coil are part of the speaker motor and voice-coil assembly. The speaker also incorporates 28 mm PEI midrange and tweeter components.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's factory speaker opening, mounting depth, mounting-hole pattern, and connector style before ordering, as these measurements are not specified in the available product information. Connect each speaker to a compatible 4-ohm channel and observe amplifier or radio power limits to avoid distortion. Factory harness adapters or mounting adapters may be needed for certain vehicles and are not confirmed as included.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45631300829254,"sku":"SGR574","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71GLdc7DoCL.jpg?v=1784377742"},{"product_id":"gravity-sgr654-6-5-4-way-full-range-car-speakers","title":"Gravity SGR654 6.5\" 4-Way Full-Range Car Speakers","description":"\u003cp\u003eThe Gravity SGR654 is a pair of 6.5-inch full-range car speakers intended for vehicles that use this common speaker size. Their 4-way design combines multiple sound-producing elements in each speaker to cover a broad portion of the audible range. They are a practical option for replacing worn factory speakers or building an entry-level car-audio system.\u003c\/p\u003e\u003cp\u003eThese speakers are specified with a 60 Hz to 20 kHz frequency response, supporting bass, midrange, and high-frequency content within one coaxial-style assembly. A 92 dB sensitivity specification indicates they are designed to produce useful output without requiring unusually high amplifier power. The 4-ohm impedance suits many conventional car-audio amplifiers and compatible head-unit speaker outputs.\u003c\/p\u003e\u003cp\u003eGravity rates the SGR654 at up to 400 watts maximum per speaker, or 800 watts maximum for the pair. Maximum-power figures are not the same as continuous RMS ratings, so amplifier selection should be based on conservative gain setting and clean, unclipped output. Proper power matching is especially important when using an external amplifier.\u003c\/p\u003e\u003cp\u003eThe speaker uses a moisture-resistant rubber surround and an anti-resonant stamped-steel basket. These construction details are intended to help the assembly tolerate vibration and typical automotive environmental conditions. Spade-style speaker terminals provide a straightforward connection point for vehicle speaker wiring.\u003c\/p\u003e\u003cp\u003eWith a listed mounting depth of 2-7\/8 inches, the SGR654 should be measured against the available clearance behind the intended mounting location before installation. It can be used as a pair for front or rear speaker replacement where fitment permits. For a more complete system, it can be paired with a compatible amplifier, wiring, and a separate subwoofer if additional low-bass output is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Size:\u003c\/strong\u003e Fits applications designed for 6.5-inch speakers when mounting clearance permits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Full-Range Design:\u003c\/strong\u003e Uses a multi-element design to reproduce a broad frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800-Watt Pair Maximum:\u003c\/strong\u003e The pair is specified for up to 800 watts maximum power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many compatible car stereo and amplifier speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture-Resistant Rubber Surround:\u003c\/strong\u003e Helps support durability in automotive listening environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure intended to limit unwanted resonance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR654 combines a stamped-steel basket with a moisture-resistant rubber surround and a 2-3\/8-inch voice coil specification. Its listed magnet size is 3-1\/8 inches, and the speaker is specified at 92 dB sensitivity. The compact full-range format keeps the sound-producing elements together in a single 6.5-inch speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6.5-inch speaker and has at least 2-7\/8 inches of mounting-depth clearance before purchase. Connect the speakers with correct polarity using the spade terminals, secure them with suitable vehicle-specific hardware, and set amplifier gain carefully to avoid distortion. Mounting adapters, harness adapters, wiring, and other installation parts may be required depending on the vehicle.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45631366365254,"sku":"SGR654","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_d11b70d8-f432-4a47-9a0c-1a90728d6cca.jpg?v=1784377790"},{"product_id":"gravity-vgc820pl-license-plate-backup-camera","title":"Gravity VGC820PL License Plate Backup Camera","description":"\u003cp\u003eThe Gravity VGC820PL is a license-plate-mounted backup camera designed to add a rear-facing video view to compatible vehicle displays. It uses a CMOS camera and CVBS video signal with an RCA connection for use with many aftermarket and select factory stereo systems. This makes it a practical option for drivers looking to add reversing visibility without changing the vehicle’s exterior appearance dramatically.\u003c\/p\u003e\u003cp\u003eBuilt for cars, trucks, and SUVs, the VGC820PL helps provide a broader view behind the vehicle while backing up. Its wide-angle lens is intended to reduce rear blind spots during parking and low-speed maneuvering. The compact black housing mounts at the license plate area for an integrated, low-profile look.\u003c\/p\u003e\u003cp\u003eThe camera features dynamic moving parking guidelines intended to adjust with steering input. These on-screen lines can help a driver judge vehicle path and positioning when reversing into parking spaces or navigating confined areas. Compatibility of the dynamic-guideline function should be verified with the receiving display and vehicle installation.\u003c\/p\u003e\u003cp\u003eVideo is delivered through a standard CVBS connection and RCA output, supporting straightforward integration with head units or monitors that accept a composite rear-camera signal. The camera itself does not provide audio functions; its role is to supply rear-view video to a compatible display. It is suited to systems being upgraded with a dedicated camera input.\u003c\/p\u003e\u003cp\u003eGravity specifies weather-resistant construction for everyday exterior use around the license plate area. The design is intended to handle exposure to rain, dust, and normal driving conditions. For a complete installation, confirm that the vehicle’s display supports a CVBS camera input and plan wiring appropriate for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMOS Camera:\u003c\/strong\u003e Provides a rear-facing video feed for compatible displays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCVBS Video Output:\u003c\/strong\u003e Supports composite video connections used by many head units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Connectivity:\u003c\/strong\u003e Connects to compatible camera inputs with an RCA connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Guidelines:\u003c\/strong\u003e Displays moving parking lines intended to follow steering input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Angle Lens:\u003c\/strong\u003e Expands the visible area behind the vehicle while reversing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLicense Plate Mount:\u003c\/strong\u003e Installs at the license plate area for a discreet appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VGC820PL uses a low-profile black housing designed for exterior installation at the vehicle’s license plate area. Its weather-resistant construction is intended for exposure to rain, dust, and routine driving conditions. The compact mounting approach helps preserve a clean, factory-style exterior presentation.\u003c\/p\u003e\u003cp\u003eInstall the camera where it has a clear rearward view and route its RCA video connection to a compatible CVBS camera input on the head unit or monitor. Verify the display’s camera-input compatibility before installation, particularly if using a factory radio. Because vehicle wiring and dynamic-guideline integration can vary, professional installation may be useful for vehicles with complex factory electronics.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45631638405190,"sku":"VGC820PL","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Nbft_lbVL.jpg?v=1784377939"}],"url":"https:\/\/audiowatt.store\/collections\/deals.oembed?page=3","provider":"Audio Watt Store","version":"1.0","type":"link"}