{"title":"Coaxial Speakers","description":null,"products":[{"product_id":"soundxtreme-st-503-5-25-3-way-coaxial-speakers","title":"SoundXtreme ST-503 5.25\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe SoundXtreme ST-503 is a pair of 5.25-inch, 3-way coaxial car speakers intended as a replacement for factory-installed speakers. It provides a compact option for vehicles that use 5.25-inch speaker locations. The full-range coaxial layout keeps the woofer and high-frequency drivers together in each speaker assembly.\u003c\/p\u003e\u003cp\u003eThis set is suited to listeners looking to refresh an aging factory speaker system or build a basic replacement system around a compatible head unit or amplifier. Its 4-ohm impedance is the common nominal load used by many car-audio systems. Confirm the vehicle's opening size, mounting depth, and connector arrangement before ordering.\u003c\/p\u003e\u003cp\u003eThe ST-503 uses a 3-way design, combining a woofer section with integrated midrange and high-frequency reproduction. This arrangement is designed to cover a broad portion of the audible range from each mounting location. The published frequency response is 100 Hz to 20 kHz, so low bass below that range is better handled by a dedicated subwoofer when deeper bass is desired.\u003c\/p\u003e\u003cp\u003eA polypropylene mid-woofer cone and PEI dome tweeter are specified for the speaker system. The listed 20 mm voice coil and 5.3-ounce magnet are part of its compact coaxial construction. With an 88 dB sensitivity rating, output will depend on the source unit or amplifier power, installation quality, and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eRated for 320 watts peak power, the ST-503 is intended for everyday replacement-speaker use rather than as a standalone bass solution. It can be used with a factory radio or an aftermarket system that is compatible with 4-ohm speakers. For a balanced upgrade, pair it with clean amplification and properly fitted mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch Size:\u003c\/strong\u003e Fits applications designed for compact round speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Integrates multiple driver elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports common factory and aftermarket car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e320W Peak Rating:\u003c\/strong\u003e Provides the published peak power-handling specification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Mounting Depth:\u003c\/strong\u003e Helps with fitment planning behind the mounting surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST-503 uses a polypropylene mid-woofer cone, PEI dome tweeter, 20 mm voice coil, and 5.3-ounce magnet. Its full-range 3-way coaxial construction combines the driver elements in a single round speaker assembly. The listed outside diameter is 5.25 inches.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle accepts a 5.25-inch round speaker and has at least 2.5 inches of mounting clearance before installation. Verify factory mounting-hole alignment, terminal connection type, and any required adapters separately, as fitment hardware is vehicle-specific. Use two matching speakers as a left\/right pair and observe correct positive and negative polarity when wiring.\u003c\/p\u003e","brand":"SoundXtreme","offers":[{"title":"Default Title","offer_id":45613243301958,"sku":"ST-503","price":30.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81OXZUIcUdL.jpg?v=1784350558"},{"product_id":"audiobank-ad36tw-4-inch-super-tweeter-speaker","title":"Audio360 AD36TW 4-Inch Super Tweeter Speaker","description":"\u003cp\u003eThe AUDIO360 AD36TW is a 4-inch super tweeter designed to add high-frequency detail to a car-audio system. It is a 4-ohm speaker with a published frequency range of 2 kHz to 20 kHz. This makes it suited to systems that need a dedicated driver for upper-frequency reproduction alongside midrange speakers and subwoofers.\u003c\/p\u003e\u003cp\u003eWith a published sensitivity of 105 dB, the AD36TW is intended for applications where efficient high-frequency output is important. Its 1,800-watt maximum-power specification identifies it as a pro-car-audio-oriented component, while no RMS power rating is published. Match the speaker with compatible amplification and system tuning rather than selecting equipment from maximum-power figures alone.\u003c\/p\u003e\u003cp\u003eThe AD36TW uses a titanium diaphragm and a CCAW voice coil. Titanium is specified for the diaphragm material, while CCAW refers to copper-clad aluminum wire in the voice coil. These published construction details distinguish the driver from basic paper- or polymer-diaphragm tweeters.\u003c\/p\u003e\u003cp\u003eThis super tweeter is a practical choice for enthusiasts building a multi-driver setup that needs more presence in the upper frequencies. Its 4-ohm nominal impedance allows it to be considered for amplifiers or passive networks designed for 4-ohm speaker loads. The published 2 kHz to 20 kHz range provides a useful starting point when planning system crossover points.\u003c\/p\u003e\u003cp\u003eThe 12.3-ounce magnet specification supports the AD36TW's dedicated high-frequency-driver design. Use it as part of a properly configured car-audio system rather than as a full-range replacement speaker. Because published mounting measurements and included accessories are not available, confirm physical fitment and installation hardware before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Super Tweeter:\u003c\/strong\u003e Adds a dedicated high-frequency driver to compatible car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Supports matching with compatible 4-ohm amplifier or crossover channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,800W Maximum Power:\u003c\/strong\u003e Published maximum-power handling for pro-car-audio system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 dB Sensitivity:\u003c\/strong\u003e Indicates efficient output from the rated speaker input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragm:\u003c\/strong\u003e Uses a titanium diaphragm for high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Features a copper-clad aluminum wire voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD36TW combines a titanium diaphragm, CCAW voice coil, and a published 12.3-ounce magnet. It is specified as a 4-inch tweeter with a 4-ohm nominal impedance. The design is focused on reproducing the upper portion of a multi-speaker car-audio system's frequency range.\u003c\/p\u003e\u003cp\u003eInstall the AD36TW only with equipment appropriate for a 4-ohm tweeter and configure the system so the speaker is used within its published 2 kHz to 20 kHz range. An appropriate crossover or high-pass arrangement should be selected as part of the overall system design; no crossover is specified as included. Verify available mounting depth, cutout requirements, wiring hardware, and package contents with the seller or installer before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613780926534,"sku":"AD36TW","price":36.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61UsGYKeH-L.jpg?v=1784350819"},{"product_id":"audiobank-ad44tw-3-93-super-tweeter-speakers","title":"Audio360 AD44TW 3.93\" Super Tweeter Speakers","description":"\u003cp\u003eThe Audio360 AD44TW is a 3.93-inch super tweeter pair designed to add dedicated high-frequency output to a car-audio system. It is suited to builds that need more presence and detail in the upper-frequency range than full-range speakers alone can provide. With a 4-ohm nominal impedance, the pair is intended for use in wired automotive audio installations.\u003c\/p\u003e\u003cp\u003eEach AD44TW is rated for up to 2200 watts maximum power, for a listed 4400-watt total maximum power rating for the pair. Its 106 dB sensitivity specification supports strong output from comparatively modest amplifier power when the system is set up correctly. The stated 1.5 kHz to 20 kHz frequency range focuses this driver on upper midrange and treble reproduction.\u003c\/p\u003e\u003cp\u003eA PEI diaphragm is used for the moving high-frequency element, while the voice coil is specified as CCAR. This material combination is intended to support consistent high-frequency reproduction in a car-audio environment. The 13-ounce magnet specification contributes to the driver assembly's structure and stability.\u003c\/p\u003e\u003cp\u003eThe AD44TW is a practical choice for enthusiasts building a louder, more detailed multi-speaker system. It can complement dedicated midrange drivers, coaxial speakers, and a properly configured amplifier system. Because it is a super tweeter, it is best used as part of a frequency-managed setup rather than as a stand-alone full-range speaker.\u003c\/p\u003e\u003cp\u003eFor a matched left-and-right installation, this listing includes two AD44TW super tweeters. Their compact 3.93-inch size can suit custom panels, doors, pillars, or other suitable locations when adequate mounting space is available. Final output and tonal balance depend on proper crossover selection, amplifier matching, and careful level setting.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.93-Inch Super Tweeters:\u003c\/strong\u003e Compact drivers dedicated to upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio amplifier and crossover configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2200W Maximum Per Tweeter:\u003c\/strong\u003e Supports high-output system planning when properly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e106 dB Sensitivity:\u003c\/strong\u003e Helps the tweeters produce strong output efficiently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Diaphragm:\u003c\/strong\u003e Provides the specified diaphragm material for treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Ounce Magnet:\u003c\/strong\u003e Adds mass to the driver motor assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD44TW uses a PEI diaphragm and a CCAR voice coil in a compact super-tweeter format. Each driver is specified with a 13-ounce magnet and a 3.93-inch speaker size. The black, wired design is intended for automotive audio use.\u003c\/p\u003e\u003cp\u003eInstall the pair in a secure location with appropriate clearance for the mounting arrangement and wiring. Use a suitable high-pass crossover or other frequency-management method to keep low-frequency content out of the tweeters, and match the amplifier and crossover to the 4-ohm load. Confirm polarity between left and right speakers, then set gain conservatively to integrate their output with the rest of the system.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613888274502,"sku":"AD44TW","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71q0Do52zVL.jpg?v=1784350865"},{"product_id":"audio360-ad6510p-6-5-4-way-coaxial-car-speakers","title":"Audio360 AD6510P 6.5\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Audio360 AD6510P is a 6.5-inch 4-way coaxial car speaker designed for vehicle audio upgrades where space and straightforward fitment matter. Its compact format is suited to many door-panel, rear-deck, and custom speaker locations that accept a 6.5-inch driver. It is intended for listeners who want to replace factory speakers or build out an aftermarket sound system.\u003c\/p\u003e\u003cp\u003eThis model combines a 4-way coaxial layout with a 4-ohm nominal impedance for use with compatible aftermarket head units and amplifiers. The 92 dB sensitivity rating supports efficient output from modest-power sources while remaining suitable for amplified systems. Its sound character is aimed at strong midbass presence and clear everyday playback.\u003c\/p\u003e\u003cp\u003eThe AD6510P is rated at 650 watts maximum power and 325 watts RMS per speaker. These published ratings make proper amplifier gain setting especially important for reliable operation. Match the system carefully and avoid driving the speakers into audible distortion.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber edge form the core of the speaker's woofer assembly. This material combination is designed to provide a durable moving surface while helping control cone movement. The coaxial construction keeps the multi-driver arrangement in a single speaker location, which can simplify an upgrade where separate tweeter mounting is not planned.\u003c\/p\u003e\u003cp\u003eWith a stated 2.76-inch mounting depth and 5.63-inch cutout diameter, the AD6510P can be considered for installations with limited rear clearance. Verify the vehicle's factory opening, available depth, mounting-hole pattern, and window or mechanism clearance before purchase. It can serve as part of a front- or rear-speaker upgrade when paired with compatible wiring and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits many common vehicle speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Design:\u003c\/strong\u003e Combines multiple drivers into one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides published headroom for compatible amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Helps guide amplifier matching and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output with compatible source power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket head units and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6510P uses an injection-molded cone with a rubber edge for a durable speaker assembly. Its 4-way coaxial design places the speaker elements together in a compact footprint. This makes it practical for installations that do not have separate locations for dedicated tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle supports a 5.63-inch cutout and at least 2.76 inches of mounting depth before installation. Use appropriate vehicle-specific brackets or adapters when required, and check clearance behind the speaker before fastening it in place. For amplified use, set gains conservatively and use compatible 4-ohm-capable equipment.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614092386374,"sku":"AD6510P","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FgnYTL49L.jpg?v=1784358286"},{"product_id":"audio360-ad6915p-6x9-4-way-coaxial-car-speakers","title":"AUDIO360 AD6915P 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe AUDIO360 AD6915P is a 6x9-inch 4-way coaxial car speaker designed for factory-location upgrades in vehicles with compatible 6x9 mounting positions. It provides an all-in-one speaker configuration for replacing worn or underperforming door or rear-deck speakers. Its 4-ohm design supports use with many aftermarket head units and amplifiers.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want fuller output and stronger midbass from a factory-sized speaker location. The stated 92 dB sensitivity helps it produce substantial output from available amplifier power. It is suited to everyday listening systems as well as custom car-audio installations using 6x9 speaker locations.\u003c\/p\u003e\u003cp\u003eThe AD6915P is rated at 1000 watts maximum power and 500 watts RMS. Proper power matching remains important, so amplifier output and gain settings should be selected carefully for the speaker system. A compatible amplifier can help provide controlled output when higher volume is desired.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber surround form the speaker's primary moving assembly. This construction is intended to support cone control and durability during regular vehicle use. The coaxial layout places multiple drivers within the 6x9 speaker format for broad sound coverage from a single mounting location.\u003c\/p\u003e\u003cp\u003eWith a 3.54-inch mounting depth and an 8.58 x 5.87-inch cutout requirement, the AD6915P should be measured against the vehicle's available space before purchase. It can be used in compatible doors, rear decks, or custom panels. Vehicle-specific mounting adapters, wiring harnesses, or hardware may be needed depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible factory-size speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides stated high-output power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket radios and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6915P uses an injection-molded cone with a rubber surround. These materials are specified to support cone control and long-term durability. Its 4-way coaxial construction consolidates the speaker elements into a single 6x9-inch assembly.\u003c\/p\u003e\u003cp\u003eConfirm both the 3.54-inch mounting depth and 8.58 x 5.87-inch cutout dimensions against the intended location before installation. Use vehicle-appropriate brackets, wiring adapters, and mounting hardware where required; their inclusion is not confirmed. For amplified systems, match the amplifier configuration to the 4-ohm speaker load and set gains conservatively.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614093959238,"sku":"AD6915P","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81C2zDpDq9L.jpg?v=1784358325"},{"product_id":"audison-ap-2-mv-2-wide-range-speakers","title":"Audison AP 2 MV 2\" Wide-Range Speakers","description":"\u003cp\u003eThe Audison AP 2 MV is a compact 2-inch wide-range speaker designed for OEM dashboard and A-pillar locations. It is intended to reproduce both midrange and high-frequency content from a single small driver, helping move the front soundstage higher in the vehicle. This makes it a practical solution for vehicles with limited factory speaker space.\u003c\/p\u003e\u003cp\u003eRather than functioning as a conventional tweeter alone, the AP 2 MV covers a broad 150 Hz to 20 kHz operating range. Its wide-band capability can reduce the need for a crossover point between separate midrange and tweeter drivers in the upper-frequency range. The result is suited to installations seeking coherent vocals, instruments, and high-frequency detail from a compact OEM-style location.\u003c\/p\u003e\u003cp\u003eThe AP 2 MV uses a 25 mm CCAW double-layer voice coil to support its 25 W continuous and 50 W peak power ratings. Its low 145 Hz resonance frequency is notable for a 50 mm driver and supports integration with a door woofer at an appropriate crossover point. With a 4-ohm nominal impedance, it is designed for use in compatible factory-replacement and aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eAn aluminum cone and copper shorting ring are used to support extended high-frequency response and impedance control. The compact motor incorporates a symmetrical double-neodymium magnetic assembly for controlled excursion in a shallow package. These engineering details allow the driver to fit where a larger midrange speaker may not be practical.\u003c\/p\u003e\u003cp\u003eAudison includes a multi-tab OEM adapter intended to support direct replacement in many General Motors, Toyota, and Mercedes applications. The AP 2 MV can also be used as a midrange in a three-way system, or as a surround or center-channel speaker where space is restricted. Confirm the factory opening, mounting depth, wiring connection, and system crossover settings before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Range Response:\u003c\/strong\u003e Covers 150 Hz to 20 kHz from one compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Inch OEM Format:\u003c\/strong\u003e Fits many 50 mm dashboard and A-pillar locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Supports power handling and low-frequency extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cone:\u003c\/strong\u003e Provides a rigid diaphragm for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Shorting Ring:\u003c\/strong\u003e Helps flatten impedance for extended high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Adapter Included:\u003c\/strong\u003e Supports installation in many GM, Toyota, and Mercedes vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 2 MV combines an aluminum cone, copper shorting ring, 25 mm CCAW double-layer voice coil, and neodymium magnetic motor in a compact basket. Its symmetrical double-neodymium magnet assembly is designed for excursion control while preserving the shallow dimensions needed for OEM-oriented installations. Each component weighs 0.15 kg.\u003c\/p\u003e\u003cp\u003eUse the supplied multi-tab adapter only after confirming its fit with the specific vehicle and factory speaker location. The speaker is suited to 50 mm OEM dash or A-pillar positions, and may also be used as a three-way midrange, surround speaker, or center-channel driver. Match it to a compatible 4-ohm audio channel and configure crossover settings appropriate to the rest of the system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217330758,"sku":"AP2MV","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ObkiJbv0L.jpg?v=1784361799"},{"product_id":"audison-ap-4-4-midrange-speakers","title":"Audison AP 4 4\" Midrange Speakers","description":"\u003cp\u003eThe Audison AP 4 is a pair of 4-inch car-audio midbass\/midrange drivers designed for factory-location upgrades where space is limited. Their compact format and shallow installation profile help address fitment challenges in many OEM speaker positions. They are intended for listeners building a more detailed front stage or replacing small factory drivers.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 40-watt continuous power handling, and 91 dB sensitivity, the AP 4 is suited to compatible factory-power and amplified systems. Its 80 Hz to 7.5 kHz frequency response covers a broad midbass and midrange range for a driver of this size. The sound-oriented design focuses on clear, balanced reproduction through the vocal and upper-midrange region.\u003c\/p\u003e\u003cp\u003eA 25 mm pure-copper voice coil supports controlled performance through the mid-high frequencies. The cone is engineered to provide a calibrated mechanical low-pass behavior, so Audison states that a passive crossover is not required to maximize driver efficiency. This makes the AP 4 a practical option for system designs that need a dedicated small-format midrange or midbass driver.\u003c\/p\u003e\u003cp\u003eThe water-repellent treated paper cone uses a profile developed with FEM simulation and optimized with Klippel Scan Vibrometer measurement. Its shallow Triple Wave TPU surround is designed to support linear excursion. Together, these elements support a compact driver intended for accurate output in OEM-style mounting locations.\u003c\/p\u003e\u003cp\u003eThe AP 4 can be used as part of a component-based car-audio upgrade with appropriate system tuning and amplification. It is supplied as a pair, allowing installation across left and right speaker locations. Confirm the vehicle's opening diameter, mounting depth, wiring polarity, and available signal range before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Driver Size:\u003c\/strong\u003e Fits applications designed for 100 mm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Handling:\u003c\/strong\u003e Supports power-matched factory or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Copper Voice Coil:\u003c\/strong\u003e Helps maintain balanced mid-high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a treated paper cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Supports linear cone excursion in a shallow profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Low-Pass Behavior:\u003c\/strong\u003e Reduces the need for a passive crossover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 4 uses a water-repellent treated paper cone, a 25 mm pure-copper voice coil, and a thermoplastic polyurethane surround with Audison's shallow Triple Wave profile. Its compact basket has an abrasion-resistant, scratch-resistant coating. The driver has a nominal 100 mm diameter, a 103 mm outer diameter, and a 0.4 kg listed weight.\u003c\/p\u003e\u003cp\u003eCheck for a 93 mm installation opening and approximately 41 mm of mounting-depth clearance before purchase; the manufacturer also lists a 43 mm overall depth dimension. Use the pair in matching left\/right locations with a compatible 4-ohm signal path and power source. APG 4 protective grilles are listed by Audison as an optional accessory rather than a confirmed included item.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217625670,"sku":"AP4","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71nDD8nYniL.jpg?v=1784361841"},{"product_id":"audison-ap-6-5-6-5-prima-series-woofers","title":"Audison AP 6.5 6.5\" Prima Series Woofers","description":"\u003cp\u003eThe Audison AP 6.5 is a pair of 165 mm (6.5-inch) Prima Series woofers designed for vehicle speaker upgrades where factory locations and practical mounting depth matter. With a 4-ohm nominal impedance and 70 watts continuous power handling, they are suited to replacing compatible door or rear-deck midbass drivers. Their compact installation profile helps support OEM-style integration without requiring an oversized speaker location.\u003c\/p\u003e\u003cp\u003eThese woofers are intended for listeners building a more detailed and controlled front-stage or full-range speaker system. The 60 Hz to 5 kHz operating range supports midbass and midrange duties, while the 93.5 dB sensitivity helps them deliver useful output from modestly powered systems. They can be used in an upgrade path with compatible tweeters, amplification, and system tuning selected for the vehicle.\u003c\/p\u003e\u003cp\u003eA 32 mm pure-copper voice coil is used to support power handling and low-frequency control. The water-repellent treated paper cone has a profile developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer testing. This engineering is intended to provide a controlled mechanical low-pass characteristic without a passive filter fitted to the woofer itself.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 uses a TPU surround with Audison's shallow Triple Wave profile, designed to maintain excursion linearity. Its high-density-flux ferrite motor, compact basket, and damping epoxy-secured motor structure support a durable installation in a vehicle environment. The design is focused on a direct-fit-oriented speaker upgrade rather than a large custom build.\u003c\/p\u003e\u003cp\u003eFor system planning, match the AP 6.5 with a compatible 4-ohm amplifier channel or head-unit output and allow for its 56 mm mounting-depth dimension. The woofer is supplied as a pair, while protective grilles are not included. Audison offers the APG 6.5 grille set separately for installations where exposed-driver protection is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits many common 6.5-inch vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 W Continuous Power:\u003c\/strong\u003e Supports amplifier-matched system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm Copper Voice Coil:\u003c\/strong\u003e Helps provide controlled low-frequency performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Suits the changing conditions inside vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Designed for linear cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Mounting Depth:\u003c\/strong\u003e Helps fit constrained OEM speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 combines a water-repellent treated paper cone, TPU Triple Wave surround, high-density-flux ferrite magnet, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The speaker terminals use high-current fast-on connections with double contacts for both positive and negative poles, plus temperature-resistant covers to help protect against accidental short circuits.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's available opening and depth with the AP 6.5 dimensions: 165 mm overall diameter, 141 mm mounting cutout reference, and 56 mm mounting-depth reference. Use correct polarity at the marked terminals and select amplification appropriate for a 4-ohm speaker rated at 70 watts continuous power. For exposed installations, plan for separately available Audison APG 6.5 protective grilles.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218412102,"sku":"AP6-5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zYDg-5m1L.jpg?v=1784361935"},{"product_id":"audison-ap-6-5p-6-5-component-woofer-pair","title":"Audison AP 6.5P 6.5\" Component Woofer Pair","description":"\u003cp\u003eThe Audison AP 6.5P is a pair of 165 mm (6.5-inch) component woofers designed for upgrading factory door-speaker locations. It is intended for listeners who want stronger midbass capability and greater power handling than typical OEM speakers can provide. Its compact format supports installations where available depth and mounting space are limited.\u003c\/p\u003e\u003cp\u003eWith 110 W continuous and 330 W peak power handling per speaker, the AP 6.5P is suited to systems using an external amplifier as well as carefully configured factory-system upgrades. Its 4-ohm nominal impedance makes it compatible with many conventional car-audio amplifier channels. The 92.5 dB sensitivity specification supports efficient output from an appropriately matched system.\u003c\/p\u003e\u003cp\u003eThe woofer uses a 32 mm Copper-Clad Aluminum Wire voice coil to manage higher applied power while keeping moving mass controlled. Audison specifies 5.6 mm Xmax for increased cone travel during dynamic passages. The result is a woofer engineered for controlled midbass response and dependable operation within its rated range.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone provides the diaphragm material, while the magnetic assembly is sized to help maintain cone control at high excursion. The basket was engineered to reduce airflow resistance while retaining a compact shape. These design choices support use in OEM-style door locations where installation clearance is an important consideration.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P is a woofer component rather than a complete coaxial speaker, making it a practical foundation for a custom component system. It can be paired with compatible tweeters, crossover networks, amplification, and sound treatment based on the vehicle and installation goals. For a front-stage upgrade, confirm fitment, available mounting depth, and the crossover plan before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits the common 6.5-inch speaker class for many door-speaker upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 W Continuous Handling:\u003c\/strong\u003e Supports use with appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm CCAW Voice Coil:\u003c\/strong\u003e Helps manage power while supporting controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Excursion:\u003c\/strong\u003e Rated at 5.6 mm Xmax for handling demanding dynamic peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Water-repellent cone material is suited to automotive-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Basket:\u003c\/strong\u003e Designed to ease installation in OEM-style speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P combines a water-repellent treated paper cone, 32 mm CCAW voice coil, compact basket, and substantial magnetic assembly. Audison designed the basket to lower airflow resistance while preserving a compact installation profile. Each speaker has a specified weight of 1.45 kg.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and panel clearance before ordering or installation. The manufacturer lists a 165 mm overall diameter, 141 mm mounting-hole diameter, 75 mm total depth, and 66.5 mm mounting depth. Because this is a woofer component, use suitable high-pass and low-pass filtering, and select compatible tweeters and crossovers when building a component system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218805318,"sku":"AP6-5P","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618Ch2qrJ1L.jpg?v=1784361979"},{"product_id":"audison-ap8-8-woofer-pair","title":"Audison AP8 8\" Woofer Pair","description":"\u003cp\u003eThe Audison AP8 is an 8-inch, 4-ohm Prima Series woofer designed for vehicle locations that use an 8-inch OEM woofer. It is intended to add capable low-frequency and midbass output in factory-style speaker positions without requiring a deep driver. Its broad 200 mm cone area helps it suit upgrades where space limits the use of a separate subwoofer.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power, the AP8 is built for use in properly matched amplified car-audio systems. Its 93.5 dB sensitivity supports efficient output from compatible amplification. The stated 35 Hz to 3 kHz frequency response gives it a useful operating range for dedicated woofer duties.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone forms the basis of the AP8's acoustic design. Audison specifies a cone profile developed through FEM simulation and optimized with Klippel Scan Vibrometer measurements. A shallow TPU Triple Wave surround is used to support controlled cone travel and excursion linearity.\u003c\/p\u003e\u003cp\u003eThe AP8 uses a 25 mm voice coil and a high-density-flux ferrite motor assembly. Its mechanical low-pass behavior is designed so a passive crossover is not required to maximize woofer efficiency. This makes the driver especially relevant in OEM-integration installations where packaging and connection simplicity matter.\u003c\/p\u003e\u003cp\u003eWith a 174 mm mounting cutout and 66 mm mounting depth, the AP8 is intended for relatively shallow factory woofer locations. Dual-contact positive and negative fast-on terminals provide connection flexibility at the speaker. It can be used as part of a larger Prima upgrade with compatible amplification, signal processing, and higher-frequency speakers selected for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Woofer:\u003c\/strong\u003e Fits applications designed around 200 mm OEM woofer locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports properly matched amplified system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm-rated car audio amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Provides a treated cone for automotive speaker use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Supports controlled excursion in a shallow-profile design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Contact Fast-On Terminals:\u003c\/strong\u003e Allows flexible, quick speaker-wire connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP8 combines a water-repellent treated paper cone, TPU surround, 25 mm voice coil, and high-density-flux ferrite magnet. Its compact basket has an abrasion-resistant, scratch-resistant coating, while the motor is secured with damping epoxy adhesive. A temperature-resistant plastic terminal cover helps protect the connections against accidental short circuits.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation: the technical drawing lists a 174 mm cutout dimension and 66 mm mounting-depth dimension. Use appropriate speaker wiring and a compatible 4-ohm amplifier channel, then set amplifier gain and filtering for the installed system. The manufacturer notes a grille is included; confirm vehicle-specific mounting hardware and adapter requirements separately.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219165766,"sku":"AP8","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81WnJItlBxL.jpg?v=1784362025"},{"product_id":"audison-apbmwk4e-4-bmw-mini-2-way-component-speakers","title":"Audison APBMWK4E 4\" BMW-Mini 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APBMW K4E is a 4-inch, two-way component speaker kit engineered for select BMW and MINI vehicles with factory two-way audio systems. It combines a 100 mm midrange driver, a separate 29 mm tweeter, and a dedicated crossover network. The kit is designed around BMW-MINI compatible mounting and Plug \u0026amp; Play connections.\u003c\/p\u003e\u003cp\u003eThis system is intended for owners replacing factory front mid-high speakers while retaining an OEM-style installation approach. Its LargeBasket configuration uses an aluminum die-cast basket designed for compatible BMW-MINI mounting locations. Vehicle-specific fitment should be verified before purchase.\u003c\/p\u003e\u003cp\u003eThe 100 mm midrange uses a water-repellent pressed-paper cone for natural midrange reproduction. Its 90 Hz resonance frequency supports high-pass filtering in the 150-200 Hz range when used in an appropriately configured system. The published system frequency response is 90 Hz to 23 kHz.\u003c\/p\u003e\u003cp\u003eA 29 mm Tetolon tweeter handles the upper-frequency range and uses a 25 mm voice coil. Its off-axis dispersion characteristics were optimized using FEM simulations, helping suit OEM tweeter positions that are not directly aimed at the listener. The supplied crossover provides a 6 kHz high-pass section at 6 dB per octave.\u003c\/p\u003e\u003cp\u003eWith 50 W continuous and 100 W peak power handling at 4 ohms, the APBMW K4E can be used as part of a factory-speaker replacement or a more extensive BMW-MINI audio upgrade. Plug \u0026amp; Play connectors, a supplied tweeter support, and a 30 cm extension cable simplify integration with compatible factory locations. It can also be paired with compatible Audison BMW underseat subwoofer solutions when a broader system upgrade is planned.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW-MINI Two-Way Design:\u003c\/strong\u003e Built for select factory two-way BMW and MINI speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Pressed-Paper Midrange:\u003c\/strong\u003e Water-repellent cone supports natural midrange character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Separate tweeter extends response through the high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Connections:\u003c\/strong\u003e Compatible connectors reduce the need for wiring modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kHz Crossover:\u003c\/strong\u003e Dedicated high-pass crossover helps divide midrange and tweeter duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor System:\u003c\/strong\u003e Compact magnetic assembly helps minimize speaker bulk and weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW K4E midrange uses an aluminum die-cast basket, neodymium magnetic group, 25 mm fiberglass voice coil, and removable damping motor cover. Its water-repellent pressed-paper cone is paired with a 29 mm Tetolon tweeter using a 25 mm voice coil. The crossover uses high-quality components and Plug \u0026amp; Play connections.\u003c\/p\u003e\u003cp\u003eThis kit is intended for select BMW-MINI vehicles equipped with factory two-way systems and compatible large-basket mounting locations. A tweeter support and 30 cm Plug \u0026amp; Play extension are supplied to assist installation in OEM placements. Confirm vehicle fitment, mounting configuration, and amplifier or factory-system compatibility before installation; some BMW models with non-standard fixings may require the separately available APBMW A4E adapter kit.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219526214,"sku":"APBMWK4E","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zf7xVJZbL.jpg?v=1784362072"},{"product_id":"audison-apbmw-k4m-4-bmw-mini-2-way-component-speakers","title":"Audison APBMW K4M 4\" BMW\/MINI 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APBMW K4M is a 4-inch, two-way component speaker kit engineered for upgrading compatible BMW and MINI factory two-way audio systems. It combines a 100 mm midrange driver with a separate 29 mm tweeter, an inline high-pass crossover, and vehicle-oriented Plug \u0026amp; Play connections. The kit is intended to improve clarity and tonal balance while retaining an OEM-style installation approach.\u003c\/p\u003e\u003cp\u003eThe 100 mm midrange uses a water-repellent pressed-paper cone, selected for natural midrange reproduction. Its 90 Hz resonance frequency supports high-pass filtering in the 150–200 Hz range when used in a properly configured system. With 50 watts continuous and 100 watts peak power handling, it is suited to factory-system upgrades and appropriately matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA 29 mm Tetolon-dome tweeter handles the upper-frequency range and is designed for off-axis dispersion in vehicle interiors. The supplied crossover uses a 6 kHz high-pass point with a 6 dB\/octave slope for the tweeter. A selectable -3 dB or 0 dB tweeter adjustment helps accommodate placement and listening preference.\u003c\/p\u003e\u003cp\u003eAudison uses neodymium magnetic assemblies to keep the components compact, while the midrange employs a 25 mm fiberglass voice coil and an aluminum die-cast basket. The midrange's removable damping motor cover and the water-repellent cone support use in factory-style door locations. Plug \u0026amp; Play connectors are built into the system to simplify integration where the vehicle fitment is compatible.\u003c\/p\u003e\u003cp\u003eThe APBMW K4M is a practical fit for listeners seeking a BMW\/MINI-specific front, rear-deck, or other OEM-location speaker upgrade, subject to vehicle compatibility. A 300 mm extension cable and tweeter support are supplied for installation flexibility and OEM-position placement. Some vehicles may require an optional mounting adapter, so fitment should be checked before ordering.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI Upgrade Design:\u003c\/strong\u003e Developed for compatible factory two-way BMW and MINI audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Midrange:\u003c\/strong\u003e Compact 4-inch driver fits small-basket OEM-style speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Water-repellent cone supports natural midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Tweeter:\u003c\/strong\u003e 29 mm dome is optimized for off-axis high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline High-Pass Crossover:\u003c\/strong\u003e Protects and routes high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Connections:\u003c\/strong\u003e Vehicle-oriented connectors simplify compatible installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW K4M pairs a neodymium motor system with an aluminum die-cast midrange basket to manage space and weight in OEM-oriented installations. Its 25 mm fiberglass midrange voice coil is designed for power handling and rigidity, while the separate tweeter uses a Tetolon dome. The kit also includes a removable damping motor cover, tweeter support, crossover hardware, and a 300 mm extension lead.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker-basket style, factory-system configuration, and available tweeter location before installation. Connect the included crossover between the vehicle wiring and tweeter as directed, then use the supplied extension cable where needed. Certain BMW\/MINI models require the optional Audison APBMW A4E adapter for non-standard mounting points; professional installation is recommended when factory trim, door panels, or wiring must be modified.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219952198,"sku":"APBMWK4M","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71CWacBZdfL.jpg?v=1784362116"},{"product_id":"audison-apbmw-x4e-4-bmw-mini-coaxial-speakers","title":"Audison APBMW X4E 4\" BMW\/MINI Coaxial Speakers","description":"\u003cp\u003eThe Audison APBMW X4E is a pair of 4-inch, two-way coaxial speakers engineered for selected BMW and MINI factory speaker locations using the large-basket fitment. It is intended for vehicles that cannot accommodate a separate front two-way system, as well as compatible rear-speaker upgrade locations. The coaxial layout combines the midrange driver and tweeter in one OEM-oriented assembly.\u003c\/p\u003e\u003cp\u003eEach APBMW X4E handles up to 40 watts continuous and 80 watts peak at a 4-ohm impedance. Its 100 Hz to 22 kHz frequency response supports midrange and high-frequency reproduction in a factory-style speaker position. With 88 dB sensitivity, it is designed to work within an appropriately matched OEM-replacement or amplified system.\u003c\/p\u003e\u003cp\u003eThe midrange section uses a water-repellent pressed-paper cone intended to provide a natural midrange character. A 25 mm fiberglass woofer voice coil supports power handling and stiffness. The built-in Tetolon dome tweeter uses a 20 mm voice coil and a 24 mm diaphragm.\u003c\/p\u003e\u003cp\u003eA neodymium magnetic assembly helps keep the speaker compact for BMW\/MINI OEM locations. The die-cast aluminum basket is made for the APBMW X4E large-basket mounting format and uses BMW\/MINI-compatible Plug \u0026amp; Play connectors. Its removable damping motor cover can be taken off where installation clearance is limited.\u003c\/p\u003e\u003cp\u003eThe APBMW X4E is a practical choice for replacing compatible factory coaxial speakers while retaining vehicle-specific mounting and connection provisions. A 30 cm extension cable with Plug \u0026amp; Play connectors is supplied to add flexibility when routing the connection. Confirm the vehicle's original speaker basket, mounting location, and audio-system configuration before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI Large-Basket Fitment:\u003c\/strong\u003e Dedicated basket and fixing arrangement suit compatible OEM speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates midrange and tweeter functions in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Power:\u003c\/strong\u003e Supports properly matched factory-replacement or amplified speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Water-repellent cone material supports natural midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e Optimized dispersion helps suit off-axis OEM speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Extension:\u003c\/strong\u003e Included 30 cm extension aids installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW X4E combines a neodymium magnetic group, 25 mm fiberglass woofer voice coil, water-repellent pressed-paper cone, and Tetolon dome tweeter. Its aluminum die-cast basket is designed for mechanical rigidity and BMW\/MINI-compatible placement. A removable damping motor cover is included as part of the speaker design.\u003c\/p\u003e\u003cp\u003eUse these speakers only where the vehicle accepts the APBMW X4E large-basket mounting format. Connect through the supplied 30 cm Plug \u0026amp; Play extension as needed, and verify clearance, connector style, and factory audio-system configuration before fitting. Although the cone is water-repellent, speakers should not be installed in locations exposed directly to water, excessive humidity, dust, or dirt.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614220968006,"sku":"APBMWX4E","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Uhr3k53kL.jpg?v=1784362241"},{"product_id":"audison-apk130-5-25-2-way-component-speaker-system","title":"Audison APK130 5.25\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK130 is a 5.25-inch, two-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over coaxial speakers. The kit combines AP 5 woofers, AP 1 tweeters, compact APCX TW passive crossovers, and protective grilles. Its 4-ohm design is intended for use with compatible factory or aftermarket car audio amplification.\u003c\/p\u003e\u003cp\u003eThis system is suited to installations with 130 mm speaker locations, including many OEM door and rear-panel placements. The separate 26 mm tweeters allow higher frequencies to be positioned closer to the listener than the woofers. That arrangement can help support a more focused front-stage installation when properly mounted and tuned.\u003c\/p\u003e\u003cp\u003eThe APK130 is rated for 75 watts continuous and 225 watts peak power handling per system, with a 70 Hz to 20 kHz published frequency response. The AP 5 woofer uses a 32 mm pure-copper voice coil, water-repellent treated paper cone, and TPU Triple Wave surround. Its 93 dB sensitivity specification supports efficient operation from appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm Tetolon-fibre diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to address response effects that can occur around 10 kHz to 13 kHz when the tweeter is installed behind restrictive OEM grilles. The included APCX TW crossover provides a selectable 0 dB or +2 dB tweeter level setting for different mounting conditions.\u003c\/p\u003e\u003cp\u003eFor an OEM-oriented upgrade, the compact woofer basket and reduced mounting depth help fit available factory speaker locations. High-current fast-on terminals on the woofers use double contacts on both positive and negative poles for flexible connection. The system can be used as a front component stage with an external amplifier or a compatible head unit, provided power and mounting requirements are checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Rating:\u003c\/strong\u003e Handles appropriately matched amplifier power for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 5 Woofer:\u003c\/strong\u003e 130 mm woofer uses a treated paper cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Tweeter:\u003c\/strong\u003e 26 mm Tetolon-fibre tweeter covers high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e APCX TW offers 0 dB and +2 dB settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Protective grilles are supplied with the speaker system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 5 woofer combines a compact, abrasion-resistant coated basket with a damping-epoxy-secured motor, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. Its 32 mm pure-copper voice coil is paired with an 85 x 40 x 13 mm magnet assembly. The AP 1 tweeter uses a neodymium magnet and a 20 mm CCAW voice coil on a Kapton former with ferrofluid cooling.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm woofer and provides sufficient mounting clearance before purchase; the AP 5 is listed at 48.5 mm mounting depth and 119 mm for Dimension B. Wire each AP 1 tweeter through its supplied APCX TW crossover, following the marked connections and preserving polarity. Use the 0 dB setting for an unobstructed A-pillar tweeter location, or the +2 dB setting when the tweeter is installed behind an OEM grille.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614222245958,"sku":"APK130","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81K_dJe06AL.jpg?v=1784362376"},{"product_id":"audison-apk163-6-5-3-way-component-speaker-set","title":"Audison APK163 6.5\" 3-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 163 is a 4-ohm, three-way component speaker system designed for upgrading factory car audio while retaining practical OEM-style installation options. It combines a 6.5-inch AP 6.5 woofer, 4-inch AP 4 midbass, and 1-inch AP 1 tweeter with dedicated passive crossover networks. This arrangement is suited to listeners who want greater frequency coverage and separation than a typical two-way component system.\u003c\/p\u003e\u003cp\u003eWith 125 watts continuous and 375 watts peak power handling, the APK 163 is intended for use with an appropriately matched aftermarket amplifier or a capable factory-powered upgrade. Its specified 50 Hz to 20 kHz frequency response covers bass, midrange, and treble duties across three separate drivers. The system's 4-ohm nominal impedance supports conventional car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil and a water-repellent pressed-paper cone to provide controlled low-frequency output. The AP 4 midbass extends the system's vocal and upper-midrange coverage, helping place more of the musical range in dedicated drivers. A 26 mm Tetolon-fiber AP 1 tweeter handles high frequencies and incorporates an acoustic lens intended for OEM grille installations.\u003c\/p\u003e\u003cp\u003eAudison equips the APK 163 with separate compact crossovers for the woofer, midbass, and tweeter. This design helps simplify OEM replacement installations by avoiding the need to route additional crossover wiring through the vehicle door. The tweeter crossover also provides 0 dB and +2 dB level settings for adjustment based on tweeter position and grille placement.\u003c\/p\u003e\u003cp\u003eThe woofer and midbass use water-repellent treated paper cones, TPU surrounds, and compact baskets intended for shallow OEM locations. Their Triple Wave surround profile is engineered to support linear cone excursion, while the woofer uses high-current fast-on terminals with dual contacts for flexible connection. Grilles and crossover networks are included, making the APK 163 a complete passive three-way front-stage speaker package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Separate woofer, midbass, and tweeter cover dedicated frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Individual networks simplify integration of each speaker component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Selection:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cones:\u003c\/strong\u003e Treated woofer and midbass cones suit vehicle-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Focused Connections:\u003c\/strong\u003e Woofer fast-on terminals support quick, flexible wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer and AP 4 midbass use high-density-flux ferrite magnets, water-repellent pressed-paper cones, and TPU Triple Wave surrounds. Their compact baskets have an abrasion-resistant, scratch-resistant coating, while the woofer motor is secured with damping epoxy adhesive. The AP 1 tweeter uses a 26 mm Tetolon-fiber diaphragm and wide-roll surround.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has mounting positions for a 165 mm woofer, 100 mm midbass, and 26 mm tweeter before installation. Install each included crossover with its intended driver and use the specified passive crossover points rather than bypassing the networks. Select the tweeter crossover's 0 dB or +2 dB setting according to placement, particularly when the tweeter is mounted behind a restrictive factory grille.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614222704710,"sku":"APK163","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61LYj2RlIVL.jpg?v=1784362419"},{"product_id":"audison-apk-165-6-5-2-way-component-speaker-system","title":"Audison APK 165 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK 165 is a 4-ohm, 6.5-inch two-way component speaker system designed for upgrading factory front-stage audio. It combines an AP 6.5 woofer, AP 1 tweeter, APCX TW passive crossover, and included grilles. The system is intended for installations where separate woofer and tweeter locations can improve staging and detail over a basic full-range door speaker.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous power handling and 300 watts peak power handling, the APK 165 is suited to systems using an appropriate external amplifier or compatible amplified source. Its 60 Hz to 20 kHz frequency response covers the main midbass and high-frequency range for a component front stage. The woofer's 93.5 dB SPL specification supports effective output from moderate-power car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. This combination is engineered for controlled low-frequency reproduction and linear cone travel. The woofer has a listed maximum linear excursion of ±2.5 mm and an 80 Hz resonant frequency.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround and an acoustic lens. The lens is designed to help address response effects in the 10 kHz to 13 kHz range that can occur when a tweeter is mounted behind restrictive factory grilles. This makes the system especially relevant for OEM-style mounting locations as well as exposed A-pillar placements.\u003c\/p\u003e\u003cp\u003eAn APCX TW passive high-pass crossover is included to direct high frequencies to the tweeter. Its selectable 0 dB and +2 dB level settings allow adjustment for different tweeter mounting conditions. The APK 165 can serve as the front component stage in a larger system with rear fill, a dedicated amplifier, DSP processing, and a subwoofer for deeper bass.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofer and tweeter support more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Matches appropriately powered 4-ohm amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX TW Crossover:\u003c\/strong\u003e Provides a high-pass network for the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Supports use in vehicle door locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Terminals:\u003c\/strong\u003e Helps simplify woofer connection during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its treated paper cone is paired with a thermoplastic polyurethane surround, while the tweeter incorporates a wide-roll surround and acoustic lens. Included grilles provide an additional finishing option where the speakers are not concealed by factory trim.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available 165 mm speaker opening, mounting depth, mounting-hole pattern, and tweeter location before installation. Use the supplied passive crossover between the signal source or amplifier and the tweeter, selecting 0 dB for an A-pillar installation without an added grille or +2 dB when the tweeter is installed behind an OEM grille. The woofer's high-current fast-on terminals use double contacts on both positive and negative poles for connection flexibility.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223130694,"sku":"APK165","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL.jpg?v=1784362462"},{"product_id":"audison-apk165ohm2-6-5-2-way-component-speaker-set","title":"Audison APK165OHM2 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 165 Ω2 is a 6.5-inch, two-way component speaker system for vehicle audio upgrades. It combines AP 6.5 Ω2 woofers, AP 1 tweeters, dedicated passive crossovers, and grilles. The separate woofer and tweeter components allow placement that better suits factory speaker locations than a single coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis system uses a 2-ohm nominal impedance and is intended for amplifiers that are stable at a 2-ohm speaker load. It is rated for 100 watts continuous power handling and 300 watts peak power. Confirm amplifier load capability and available installation space before choosing this version.\u003c\/p\u003e\u003cp\u003eThe APK 165 Ω2 has a specified frequency response of 50 Hz to 20 kHz and a 95 dB sensitivity rating. Its 75 Hz woofer resonance frequency and 2.8 mm maximum linear excursion support useful low-frequency output within a properly installed door or factory speaker location. A separate tweeter is used to cover upper frequencies instead of asking the woofer to reproduce the full range.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 Ω2 woofer uses a water-repellent treated paper cone and a TPU surround with Audison's Triple Wave profile. Its 25 mm voice coil has a 10 mm winding height, while the compact basket is finished with an abrasion- and scratch-resistant coating. The AP 1 tweeter incorporates an acoustic lens intended to help balance response in the 10 kHz to 13 kHz region when used behind restrictive factory grilles.\u003c\/p\u003e\u003cp\u003eTwo separate passive crossovers divide the signal between the woofer and tweeter. The APCX WF Ω2 woofer network uses a low-loss inductor, while the APCX TW Ω2 tweeter network provides selectable Hi-Contour operation. Integrated crossover leads terminate in polarity-differentiated fast-on connectors to support OEM-style speaker replacement wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm System:\u003c\/strong\u003e Designed to draw more power from compatible 2-ohm-stable amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Direct woofer and tweeter frequencies to their intended drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Contour Tweeter Setting:\u003c\/strong\u003e Provides a selectable upper-frequency contour option for installation conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Woofer Cone:\u003c\/strong\u003e Uses water-repellent paper material for the 6.5-inch woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Leads:\u003c\/strong\u003e Polarity-differentiated connectors simplify crossover-to-speaker connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer uses a 165 mm frame with a 127 mm cone diameter, a 25 mm voice coil, and an 85 x 32 x 15 mm magnet. Its TPU Triple Wave surround is designed for linear excursion, while the compact basket is coated for abrasion and scratch resistance. The 26 mm AP 1 tweeter uses a 20 mm voice coil and an acoustic lens, and protective grilles are included.\u003c\/p\u003e\u003cp\u003eInstall the woofers only where the vehicle provides adequate mounting depth and clearance, and mount the tweeters securely behind a protective grille. Route the amplifier signal first to the supplied APCX WF Ω2 and APCX TW Ω2 passive networks, then connect each network to its matching driver using the integrated fast-on leads. Use an amplifier that is explicitly rated for 2-ohm operation, observe polarity, and select the tweeter contour setting according to the mounting position and factory-grille presence.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223589446,"sku":"APK165OHM2","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL_c825f717-f13c-4df3-9bd2-045249988241.jpg?v=1784362512"},{"product_id":"audison-apk165p-6-5-2-way-component-speaker-system","title":"Audison APK165P 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK165P is a 6.5-inch, 2-way component speaker system for upgrading front-stage sound in compatible vehicle locations. It pairs separate AP 6.5P woofers with AP 1P tweeters and dedicated passive crossover modules. The system is designed for installations where the woofer and tweeter are mounted separately rather than in a single coaxial speaker location.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 115-watt continuous power handling, and 345-watt peak power handling, this system is suited to aftermarket audio systems using a compatible head unit or external amplifier. Its 50 Hz to 24 kHz stated system frequency response covers bass and midrange from the door woofer through high frequencies from the separate tweeter. The 92.5 dB SPL system sensitivity rating supports efficient output from properly matched equipment.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P woofer uses a water-repellent treated paper cone and a 32 mm CCAW voice coil. Its 5.6 mm Xmax specification and compact basket are intended to support factory-style door mounting locations. The AP 1P tweeter uses a 29 mm Tetolon fibre dome with a 25 mm CCAW voice coil.\u003c\/p\u003e\u003cp\u003eAudison's AIF, or Any Install Faceplate, system gives the AP 1P tweeter interchangeable mounting options. Three mounting accessories are supplied to support different installation approaches, helping accommodate common factory tweeter locations and custom placements. The tweeter's double-neodymium magnetic assembly and FEM-optimized dome profile are engineered for high-frequency extension and off-axis dispersion.\u003c\/p\u003e\u003cp\u003eSeparate compact crossover modules divide the signal between the woofer and tweeter. The woofer low-pass filter is specified at 4 kHz with a 6 dB\/octave slope, while the tweeter high-pass filter is 4 kHz with a 12 dB\/octave slope. This makes the APK165P a practical component set for a front-speaker upgrade built around compatible 4-ohm amplification and proper vehicle-specific mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate 6.5-inch woofers and 29 mm tweeters allow dedicated placement of each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e115 W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting:\u003c\/strong\u003e Interchangeable faceplates and supplied mounting accessories support varied mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Copper-clad aluminum wire voice coils are used in both woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Separate compact woofer and tweeter crossover modules simplify signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e The AP 6.5P woofer cone is treated for automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P woofer combines a treated paper cone, 32 mm CCAW voice coil, compact basket, and a 100 x 40 x 18 mm magnetic assembly. The AP 1P tweeter uses a Tetolon fibre dome, 25 mm CCAW voice coil, and double-neodymium magnetic assembly. The system also provides a selectable tweeter level setting of 0 dB or +3 dB at the crossover.\u003c\/p\u003e\u003cp\u003eConfirm door opening diameter, mounting depth, and clearance behind the panel before installation; the AP 6.5P lists a 141 mm cutout diameter and 66.5 mm mounting depth. Route each channel through its assigned passive crossover rather than connecting the tweeter directly to a full-range amplifier output. Secure all components firmly, use the appropriate faceplate and mounting accessory for the tweeter location, and confirm polarity before reassembling vehicle trim.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614226604102,"sku":"APK165P","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71KYClkNHCL.jpg?v=1784362857"},{"product_id":"audison-apk570-5-x-7-2-way-component-speakers","title":"Audison APK570 5 x 7\" 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APK570 is a 2-way component speaker system designed for vehicles with factory 5 x 7-inch elliptical door-speaker locations. It combines AP 570 woofers, AP 1 tweeters, and dedicated APCX TW 570 passive crossovers. This kit is intended for replacing factory door speakers while retaining a separate tweeter layout.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous and 300 watts peak power handling, the APK570 is suited to amplified systems as well as compatible factory or aftermarket head-unit upgrades. Its 4-ohm nominal impedance supports common car-audio amplification configurations. The rated 55 Hz to 20 kHz frequency response covers midbass through high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe AP 570 woofer uses a 32 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer measurement. A Triple Wave surround is used to support linear cone excursion.\u003c\/p\u003e\u003cp\u003eThe separate AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround. Its acoustic lens is designed to address in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM tweeter placements. The dedicated crossover routes high frequencies to the tweeter at a specified 3 kHz high-pass point.\u003c\/p\u003e\u003cp\u003eFor OEM-focused installation, the APK570 uses a compact woofer basket and reduced mounting depth. High-current double-contact Faston terminals simplify woofer and tweeter connections, while the compact crossover includes selectable tweeter attenuation. It is a practical option when a vehicle already accommodates 5 x 7-inch door woofers and separate tweeters.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7-Inch Component System:\u003c\/strong\u003e Fits vehicles designed for elliptical 5 x 7-inch door woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Power:\u003c\/strong\u003e Supports substantial power in an appropriately matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Separate Tweeters:\u003c\/strong\u003e Provides dedicated high-frequency reproduction outside the woofer location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Directs high frequencies to the tweeters at 3 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Offers 0 dB or +2 dB attenuation selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps suit the woofer to door-mounted use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 570 woofer combines a treated paper cone, Triple Wave surround, pure-copper voice coil, and compact coated basket. Its motor is secured with damping epoxy adhesive, while the AP 1 tweeter uses a wide-roll surround and acoustic lens. The crossover is compact and includes Faston connectors intended to reduce connection errors.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 5 x 7-inch woofer openings and provisions for separate tweeters before installation. Use the included dedicated APCX TW 570 crossovers between the audio source or amplifier and the individual woofer and tweeter connections. Match the system to a compatible 4-ohm amplifier or speaker output and observe the 100-watt continuous power rating when setting amplifier gain.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614227062854,"sku":"APK570","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71aKwGyxdOL.jpg?v=1784362895"},{"product_id":"audison-apk690-6x9-2-way-component-speaker-system","title":"Audison APK690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK690 is a Prima Series 2-way component speaker system designed for vehicles with factory 6 x 9-inch door speaker locations. It combines AP 690 elliptical woofers, AP 1 tweeters, and dedicated APCX TW 690 passive crossovers. This configuration provides a practical upgrade path for vehicles that need separate high-frequency placement rather than a coaxial speaker.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power handling, the APK690 presents a 4-ohm load to the audio system. Its specified system frequency response is 40 Hz to 20 kHz, covering bass and midrange output from the wofer section along with high-frequency extension from the separate tweeters. The woofer sensitivity is rated at 95 dB SPL.\u003c\/p\u003e\u003cp\u003eThe AP 690 woofer uses a 25 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized with Klippel R\u0026amp;D Scan Vibrometer measurements. A Triple Wave surround is used to support linear cone excursion, while the compact basket is intended to help with OEM-style door installations.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter has a 26 mm diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to help compensate for in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM mounting locations. The separate tweeter arrangement gives installers flexibility to retain or improve factory high-frequency speaker positions.\u003c\/p\u003e\u003cp\u003eEach system uses an APCX TW 690 crossover, which applies a 6 dB-per-octave high-pass filter at 3.3 kHz for the tweeter. The compact crossover includes a 0 dB or +3 dB tweeter-level setting for adjustment after installation. The APK690 can be used as part of a factory-radio upgrade or paired with a compatible 4-ohm aftermarket amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible vehicle-specific placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports systems rated up to 100 watts continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e APCX TW 690 networks manage tweeter filtering and level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Choose 0 dB or +3 dB tweeter attenuation settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Treated woofer cone is designed for door-speaker environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Woofer Coil:\u003c\/strong\u003e 25 mm voice coil supports power handling and cone control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 690 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its 90 x 32 x 15 mm woofer magnet and 25 mm voice coil are paired with a treated paper cone and Triple Wave surround. The AP 1 tweeter uses a 26 mm diaphragm, while the compact APCX TW 690 crossover measures 46.5 x 37.5 x 20.1 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6 x 9-inch elliptical woofer and has adequate mounting clearance before purchase. Install the AP 1 tweeters and AP 690 woofers through the supplied APCX TW 690 crossovers; the crossover's fast-on connectors are intended to simplify correct connections. Match the system to a compatible 4-ohm amplifier or speaker channel, and use the 0 dB or +3 dB tweeter setting to suit the final mounting location.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614227554374,"sku":"APK690","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-VOSfKKVL.jpg?v=1784362949"},{"product_id":"audison-apx4-4-2-way-coaxial-speakers","title":"Audison APX4 4\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX4 is a pair of 4-inch, 2-way coaxial car speakers designed for compact factory speaker locations. Its integrated woofer and tweeter arrangement provides a space-conscious way to upgrade systems that use 100 mm speakers. With a 4-ohm load and 40 watts of continuous power handling, it is suited to factory-radio upgrades or properly matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA concentric coaxial tweeter places the high-frequency driver at the center of the woofer for a single sound-emission point. This design is intended to support consistent phase response and a focused acoustic image from typical vehicle speaker positions. The tweeter also uses an acoustic lens designed for linear response in off-axis installations.\u003c\/p\u003e\u003cp\u003eThe APX4 covers a specified 80 Hz to 23 kHz frequency range, with 91 dB SPL sensitivity. Its compact format is useful where a larger door speaker will not fit or where an OEM-sized 4-inch opening is available. The 120-watt peak rating provides additional short-term power capacity when paired with a suitable audio system.\u003c\/p\u003e\u003cp\u003eAudison uses a water-repellent treated paper woofer cone with a profile developed through FEM simulation and optimized with Klippel Scan Vibrometer testing. The TPU surround uses the shallow Triple Wave profile to support excursion linearity. A 32 mm pure-copper woofer voice coil is paired with a 15 mm tweeter voice coil.\u003c\/p\u003e\u003cp\u003eFor installation flexibility, the APX4 uses a low-profile basket and has a 41 mm mounting depth. It can be considered for factory-location replacements where its mounting dimensions and 4-ohm impedance match the vehicle's requirements. Verify the available opening, mounting depth, wiring, and amplifier or head-unit compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter into one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Woofer:\u003c\/strong\u003e Fits applications designed around a 4-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric Tweeter:\u003c\/strong\u003e Uses a single sound-emission point for coherent driver alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Handling:\u003c\/strong\u003e Matches modest factory-radio or aftermarket amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave Surround:\u003c\/strong\u003e TPU surround profile supports controlled cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e41 mm Mounting Depth:\u003c\/strong\u003e Low-profile format helps with OEM-location installation planning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX4 uses a water-repellent treated paper cone, a TPU surround, and a compact basket with abrasion-resistant, scratch-proof coating. Its motor is secured with damping epoxy adhesive. High-current fast-on terminals use double contacts on both positive and negative poles, with a temperature-resistant plastic terminal cover.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 100 mm speaker and provides at least the required 41 mm mounting depth before purchase. Observe speaker polarity when connecting the terminals, securely fasten the speakers to the vehicle structure, and keep wiring away from sharp edges, moving parts, heat sources, moisture, and vehicle electrical equipment. Protective grilles are not included; APG 4 grilles are available separately.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614232862790,"sku":"APX4","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71mrSm2nWzL.jpg?v=1784363186"},{"product_id":"audison-apx5-5-25-2-way-coaxial-speakers","title":"Audison APX5 5.25\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX5 is a 130 mm two-way coaxial speaker designed for compact factory-location upgrades in vehicle doors or rear panels. It combines a woofer and centrally mounted tweeter in one assembly, helping simplify installation where separate component speakers are not practical. With a 4-ohm nominal impedance and 50 W continuous power handling, it is suited to compatible factory radios or modest external amplification.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners seeking a clearer, more coherent upgrade from worn or basic OEM speakers while retaining a straightforward coaxial layout. Its concentric tweeter places high-frequency output at the same acoustic center as the woofer. Audison designs this arrangement to support a consistent in-phase response and soundstage presentation.\u003c\/p\u003e\u003cp\u003eThe APX5 uses a 5-inch-class woofer with a stated frequency response of 70 Hz to 23 kHz and 93 dB sensitivity. That range supports midbass and treble reproduction for full-range door or rear-fill duties, while a subwoofer can handle the lowest bass frequencies in a larger system. Its 150 W peak rating provides additional short-term power capacity beyond the 50 W continuous rating.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone and TPU Triple Wave suspension are used in the woofer assembly. The shallow suspension profile is engineered for linear excursion, with a stated Xmax of 2 mm. A 32 mm pure-copper woofer voice coil supports power handling and low-frequency control.\u003c\/p\u003e\u003cp\u003eThe APX5 is part of Audison's Prima speaker range and can be used as a direct-fit-style replacement when vehicle dimensions allow. Its low-profile basket and 48 mm mounting-depth dimension are intended to aid OEM integration. For systems needing added protection or a finished appearance, Audison lists the APG 5 protective grille set as a compatible accessory.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric Tweeter:\u003c\/strong\u003e Helps maintain a single acoustic emission point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 W Continuous Handling:\u003c\/strong\u003e Matches compatible factory radios and modest amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e93 dB Sensitivity:\u003c\/strong\u003e Supports useful output from moderate available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave Suspension:\u003c\/strong\u003e Supports controlled, linear woofer excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds durability for typical vehicle-door environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX5 uses a compact, abrasion-resistant and scratch-resistant coated basket with the motor secured using damping epoxy adhesive. Its woofer combines a treated paper cone, TPU surround, and 32 mm pure-copper voice coil. The integrated 24 mm tweeter includes an acoustic lens intended to maintain linear response in off-axis in-door placement.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm speaker and verify the available mounting opening, outer diameter, and depth before ordering. Audison lists dimensions of 119 mm for B, 48 mm for D, and 51 mm for C; installers should compare these measurements with the factory location and any adapter requirements. Connect the speakers to a compatible 4-ohm source and avoid exceeding the 50 W continuous power rating.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614233223238,"sku":"APX5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UQIenvESL.jpg?v=1784363228"},{"product_id":"audison-apx570-5-x-7-2-way-coaxial-speakers","title":"Audison APX570 5 x 7\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX570 is a pair of 5 x 7-inch, 2-way coaxial car speakers designed for replacement or upgrade use in compatible factory speaker locations. Its coaxial layout combines the woofer and tweeter into one assembly, helping simplify installations where separate tweeter mounting is not practical. With a 4-ohm impedance and 70-watt continuous power handling, it is suited to systems using a compatible factory radio or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA concentric 24 mm tweeter is positioned within the woofer so both drivers share a single point of sound emission. This arrangement is intended to support a more consistent phase response between high and low frequencies. An integrated acoustic lens is used to help maintain a linear response when the speakers are installed off-axis in vehicle doors.\u003c\/p\u003e\u003cp\u003eThe APX570 uses a water-repellent treated paper cone and a TPU surround with Audison's shallow Triple Wave profile. The surround profile is engineered to support linear cone excursion, while the 32 mm pure-copper woofer voice coil is designed for power handling and low-frequency control. Its published frequency response is 60 Hz to 23 kHz, with 93 dB sensitivity.\u003c\/p\u003e\u003cp\u003eFor OEM-oriented installations, the APX570 uses a compact, low-profile basket and a 63 mm mounting depth. The oval 5 x 7-inch format can suit vehicles equipped for this speaker shape, provided the factory opening, mounting pattern, window clearance, and connector arrangement are checked before installation. The speakers use high-current fast-on terminals with double contacts for both positive and negative connections.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a direct coaxial replacement where a compact all-in-one design is preferred over a separate component system. They are a practical match for listeners seeking an Audison Prima-series speaker upgrade without adding external tweeters or crossover housings. Grilles are not included, so installations behind factory door panels or with separately sourced grilles should be planned accordingly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 24 mm Tweeter:\u003c\/strong\u003e Uses a single emission point for consistent driver alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Continuous Handling:\u003c\/strong\u003e Supports compatible amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Helps support linear cone movement during excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds moisture resistance for typical door installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Basket:\u003c\/strong\u003e Supports OEM-oriented installation with a 63 mm mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX570 has a water-repellent treated paper cone, TPU surround, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The centered tweeter incorporates an acoustic lens, and the speaker was developed using the KLIPPEL suite.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 5 x 7-inch speakers and compare the factory opening with the APX570's 182 x 126 mm mounting-hole dimensions before ordering. Allow for the published 63 mm mounting depth and verify clearance behind the mounting surface, including window travel in doors. Use the double-contact fast-on terminals with correct polarity, and note that grilles are not included.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614233714758,"sku":"APX570","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ywmFTbmVL.jpg?v=1784363272"},{"product_id":"audison-av-3-0-ii-3-midrange-speakers","title":"Audison AV 3.0 II 3\" Midrange Speakers","description":"\u003cp\u003eThe Audison AV 3.0 II is a compact 70 mm midrange speaker designed to reproduce the vocal and instrument range in an upgraded car audio system. It is intended for systems where a dedicated midrange driver can improve placement and detail compared with relying on a door woofer alone. Its compact format supports installations where space is limited, including suitable door and A-pillar locations.\u003c\/p\u003e\u003cp\u003eThis speaker is a practical choice for builders assembling a three-way front stage with separate tweeters and woofers. Its 50 W continuous power handling and 90 dB sensitivity make it suitable for a properly configured amplified system. The AV 3.0 II is engineered for controlled mid-frequency output from 160 Hz to 13 kHz.\u003c\/p\u003e\u003cp\u003eA semi-pressed paper cone with cotton fibers combines low mass with mechanical damping for natural midrange reproduction. The rubber surround and optimized suspension are designed to support controlled cone movement. FEM-designed cone geometry is used to promote more consistent dispersion for listeners seated off-axis in a vehicle cabin.\u003c\/p\u003e\u003cp\u003eThe AV 3.0 II uses a 26 mm CCAW voice coil, neodymium motor, and built-in copper shorting ring. This motor arrangement is designed to reduce inductance modulation and support upper-midrange extension. Its die-cast aluminum basket provides a rigid chassis structure while the compact motor layout keeps mounting depth to 31.2 mm.\u003c\/p\u003e\u003cp\u003eFor system integration, the AV 3.0 II provides both conventional terminals and an OEM-style two-pin connector with an included bare-wire pigtail. A black mesh metal grille is included to protect the driver after installation. It is designed to work as a dedicated midrange in an actively filtered system or with an appropriately matched three-way crossover network.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 mm Midrange Driver:\u003c\/strong\u003e Adds a dedicated driver for vocals, instruments, and central soundstage detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-Pressed Paper Cone:\u003c\/strong\u003e Cotton-fiber pulp construction balances low mass, rigidity, and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 mm CCAW Voice Coil:\u003c\/strong\u003e Supports efficient motor control and heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Shorting Ring:\u003c\/strong\u003e Reduces inductance modulation for clearer upper-midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Delivers magnetic strength in a compact mounting format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Connection Options:\u003c\/strong\u003e OEM-style connector and standard terminals simplify system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 3.0 II combines an aluminum chassis, neodymium magnet, glass-fiber voice-coil former, semi-pressed paper cone, and rubber surround. Its die-cast basket is designed for rigidity and airflow around the moving assembly. The included black mesh grille protects the speaker, while optional AVG 3.0 S II silver grilles provide an alternate appearance.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space against the 84 mm outer diameter and 31.2 mm mounting depth before installation. The supplied OEM-style pigtail can be soldered or crimped to vehicle speaker wiring, while standard terminals remain available as an alternative. For active DSP systems, Audison recommends a 300-500 Hz Linkwitz-Riley high-pass filter at 24 dB\/octave, with a symmetrical low-pass filter set at the tweeter's high-pass frequency.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614237581382,"sku":"AV3-0II","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71QWvVq3cjL.jpg?v=1784363532"},{"product_id":"audison-avx-6-5-ii-6-5-2-way-coaxial-speakers","title":"Audison AVX 6.5 II 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison AVX 6.5 II is a 6.5-inch, 2-way coaxial speaker set from the VOCE II line. It combines a 165 mm woofer and centrally mounted 25.4 mm dome tweeter in each speaker, providing a compact solution where separate tweeter locations are not practical. The set is intended for vehicle audio upgrades that need broad bandwidth and a cohesive point-source layout.\u003c\/p\u003e\u003cp\u003eIts coaxial architecture places the tweeter at the center of the woofer, helping the two drivers originate sound from the same location. This is useful in door, rear-deck, or factory-style speaker positions where listening angles vary. The rated low-frequency response extends from 45 Hz, while high-frequency response reaches 40 kHz.\u003c\/p\u003e\u003cp\u003eThe woofer uses a semi-pressed paper cone, rubber surround, aluminum chassis, 40 mm CCAW voice coil, and high-density-flux ferrite magnet. The central tweeter uses a Tetolon fibre dome and surround, 25 mm CCAW voice coil, and neodymium magnet. These materials support the AVX 6.5 II's wide operating range in a compact coaxial format.\u003c\/p\u003e\u003cp\u003eAudison supplies separate passive crossover modules for the woofer and tweeter: AVCX 2 XW and AVCX 2 XT. This separates the filtering duties rather than using a single shared inline network. The speaker can alternatively be used in an active two-way system with DSP-based filtering and separate amplifier channels for the woofer and tweeter sections.\u003c\/p\u003e\u003cp\u003eThe AVX 6.5 II suits installations seeking an upgraded 6.5-inch coaxial solution with passive-crossover flexibility and an active-system upgrade path. OEM-style 2-pin connectors with bare-wire pigtails are included for serviceable vehicle wiring, while conventional speaker terminals remain available. Confirm available mounting clearance and the vehicle's speaker mounting arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one vehicle-friendly speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certification:\u003c\/strong\u003e Supports high-frequency reproduction extending to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 1-Inch Tweeter:\u003c\/strong\u003e Centers the tweeter within the woofer for point-source emission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Includes dedicated AVCX 2 XW and AVCX 2 XT modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive-System Capability:\u003c\/strong\u003e Supports DSP-based active two-way filtering and tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Connections:\u003c\/strong\u003e Includes 2-pin pigtail connectors for serviceable vehicle wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVX 6.5 II uses an aluminum chassis, semi-pressed paper woofer cone, rubber surround, ferrite woofer motor, and neodymium tweeter motor. Its 25.4 mm Tetolon fibre dome tweeter is mounted concentrically, and the woofer uses a 40 mm CCAW voice coil on a glass-fiber former. Overall dimension A is 165 mm, with a listed overall depth of 74.2 mm.\u003c\/p\u003e\u003cp\u003eFor passive operation, connect the woofer and tweeter sections through the included AVCX 2 XW and AVCX 2 XT crossover modules. For an active DSP installation, Audison recommends a 70 Hz high-pass filter for the woofer and a 3 kHz high-pass point for the tweeter, both using 24 dB\/octave Linkwitz-Riley filters. Check mounting depth, mounting diameter, wiring polarity, and amplifier capability before fitting the speakers.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242889798,"sku":"AVX6-5II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_wdvghMlL.jpg?v=1784363838"},{"product_id":"audison-c2o-coaxial-to-optical-audio-converter","title":"Audison C2O Coaxial-to-Optical Audio Converter","description":"\u003cp\u003eThe Audison C2O is a compact car-audio interface that converts either a coaxial S\/PDIF digital source or an analog AUX source into a TOSLINK optical digital output. It helps connect portable music players and smartphones to a compatible processor or other component with an optical digital input. This makes it useful when the source device and the receiving audio component use different digital connection formats.\u003c\/p\u003e\u003cp\u003eThe C2O accepts a 75-ohm electrical coaxial S\/PDIF signal at resolutions up to 24-bit\/192 kHz. Its optical output preserves the incoming digital signal path at up to 24-bit\/192 kHz when using the coaxial input. For an analog source, it converts the incoming signal to a 24-bit\/48 kHz optical output.\u003c\/p\u003e\u003cp\u003eAn adjustable analog input stage accommodates source levels from 0.1 to 2 Vrms. The analog AUX input uses a 3.5 mm stereo jack that supports 3-pole and 4-pole plugs, making it suited to many portable devices. Analog-input performance is specified at 0.002% THD, a 5 Hz to 24 kHz bandwidth, and a 105 dB A-weighted signal-to-noise ratio.\u003c\/p\u003e\u003cp\u003eThe C2O automatically manages its two inputs, with analog AUX assigned priority when both sources are present. When the analog signal stops, it can switch to the coaxial digital input after 6, 9, or 12 seconds; 6 seconds is the default setting. This arrangement can simplify a system using both a portable analog device and a dedicated coaxial digital player.\u003c\/p\u003e\u003cp\u003eIts coaxial input includes an isolation transformer intended to reduce susceptibility to electromagnetic interference in a vehicle environment. The compact 69 x 26 x 54.5 mm housing can be positioned close to the source device to keep signal cabling short. It is designed for 6 to 30 VDC vehicle electrical systems and can be activated by a conventional remote signal or a +12V remote connection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaxial-to-Optical Conversion:\u003c\/strong\u003e Converts electrical coaxial S\/PDIF audio to a TOSLINK optical output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnalog AUX Conversion:\u003c\/strong\u003e Converts a 3.5 mm analog source to 24-bit\/48 kHz optical audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/192 kHz Support:\u003c\/strong\u003e Passes compatible coaxial digital sources to optical at high resolution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable AUX Level:\u003c\/strong\u003e Matches analog source levels from 0.1 to 2 Vrms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Input Selection:\u003c\/strong\u003e Gives AUX priority and switches to digital after a selectable delay.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolated Coaxial Input:\u003c\/strong\u003e Uses an isolation transformer to help reduce EMI-related noise.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C2O uses a small interface enclosure measuring 69 mm wide, 26 mm high, and 54.5 mm deep, with a listed weight of 0.048 kg. Its connection layout provides a 3.5 mm analog input, electrical coaxial S\/PDIF input, and optical output. An internal selector sets the analog-input level and the delay before digital-input activation.\u003c\/p\u003e\u003cp\u003eInstall the C2O in a dry, protected location with access to the source device and the receiving component's optical input. Use a 75-ohm coaxial cable for a coaxial digital source and a TOSLINK cable no longer than 4.5 m for the optical connection. Confirm that the receiving processor or device accepts the output resolution associated with the selected source, then connect vehicle power, ground, and the appropriate remote turn-on wiring.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614250426438,"sku":"C2O","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/611SNzFOZ3L.jpg?v=1784364040"},{"product_id":"cerwin-vega-cvp69-6x9-4-ohm-full-range-speaker","title":"Cerwin-Vega CVP69 6x9\" 4-Ohm Full-Range Speaker","description":"\u003cp\u003eThe Cerwin-Vega CVP69 is a single 6x9-inch PRO Series full-range car speaker designed for vehicle audio systems that need higher output capability than typical factory speakers. Its 4-ohm impedance makes it suitable for common car-audio amplifier channels and compatible system designs. It is intended for custom installations in cars, trucks, SUVs, vans, motorcycles, and other vehicle-based audio applications.\u003c\/p\u003e\u003cp\u003eWith a 150-watt RMS and 300-watt maximum power rating, the CVP69 is built for systems that prioritize strong output and controlled midrange presence. Its 94 dB sensitivity rating helps it produce substantial output from available amplifier power. The published 50 Hz to 20 kHz frequency-response range supports broad-band reproduction from a single pro-style driver.\u003c\/p\u003e\u003cp\u003eThe CVP69 uses a treated paper cone and treated cloth surround to provide a durable moving assembly for high-output use. A 1.5-inch high-temperature, single-layer voice coil supports its stated power handling. Its ferrite motor uses a high-density, high B\/L design intended to maintain driver control under demanding playback conditions.\u003c\/p\u003e\u003cp\u003eA heavy-duty stamped-steel basket provides a rigid mounting platform for the speaker assembly. The driver has a 20-ounce ferrite magnet structure and a 4.53-inch magnet diameter. This construction makes it a practical choice for installations where a pro-driver format and physical durability are priorities.\u003c\/p\u003e\u003cp\u003eThe CVP69 is sold individually, allowing installers to build a matched pair or larger multi-speaker layout as needed. It can be used as part of a high-output system with compatible amplification and optional dedicated tweeters or subwoofers. Verify the vehicle's mounting opening, mounting depth, wiring, and available power before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplifier-powered systems designed around substantial continuous output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch PRO Driver:\u003c\/strong\u003e Fits applications designed for an oval 6x9-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides a lightweight cone material for responsive sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a durable structural base for secure mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP69 combines a treated paper cone, treated cloth surround, ferrite magnet, high-temperature voice coil, and stamped-steel basket. Its pro-driver construction is focused on output capability and mechanical durability. The speaker uses a single 4-ohm voice coil and does not include a grille.\u003c\/p\u003e\u003cp\u003eAllow for an 8.74 x 5.98-inch mounting cutout and 3.07 inches of mounting depth behind the mounting surface. Confirm that the vehicle panel has sufficient clearance for the 9.29 x 6.46-inch overall frame and 3.17-inch total depth. For best results, use secure mounting hardware, correct-polarity speaker wiring, and an amplifier channel matched appropriately to the speaker's 4-ohm load and 150-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614314848326,"sku":"CER-CVP69","price":56.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61uyNrKUwIL.jpg?v=1784366022"},{"product_id":"cerwin-vega-h25-2-5-full-range-car-speakers","title":"Cerwin-Vega H25 2.5\" Full-Range Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H25 is a pair of compact 2.5-inch full-range car speakers for replacing small factory speakers or completing a custom vehicle audio installation. Their compact mounting dimensions suit locations where a larger door or dash speaker will not fit. Each speaker uses a 4-ohm nominal impedance for compatibility with many car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eWith 10 watts RMS and 30 watts maximum power handling per speaker, the H25 is intended for low-power factory-radio or appropriately matched amplified applications. Its 83 Hz to 20 kHz frequency-response specification supports a broad range of musical detail within a small-speaker format. A sensitivity rating of 82 dB at 1W\/1m indicates that proper power matching is important for expected output.\u003c\/p\u003e\u003cp\u003eThe H25 uses a responsive treated paper cone to reproduce the audible range assigned to the speaker. A UV-treated foam surround supports cone movement while helping the assembly withstand normal automotive conditions. The full-range design provides a practical solution where a separate tweeter and crossover system are not required.\u003c\/p\u003e\u003cp\u003eA strontium ferrite magnet motor structure supports the speaker's operation, while the powder-coated stamped-steel basket provides a rigid mounting foundation. This construction is designed to help control unwanted vibration at the speaker frame. The result is a compact replacement speaker focused on clear, direct sound in small factory locations.\u003c\/p\u003e\u003cp\u003eSold as a pair, the H25 can be used for left- and right-channel replacement in compatible vehicle positions. A speaker fitment adapter is included to assist with installation in applicable factory locations. Cerwin-Vega identifies the H25 for drop-in use in select GM, Ford, Chrysler, Jeep, Dodge, and Asian-import factory-speaker locations, but vehicle-specific fitment should always be checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Full-Range Design:\u003c\/strong\u003e Fits compact speaker locations while covering a broad frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides responsive full-range sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and material durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrontium Ferrite Magnet:\u003c\/strong\u003e Provides the speaker's magnetic motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Adapter Included:\u003c\/strong\u003e Helps adapt the speakers for applicable factory locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H25 combines a treated paper cone, UV-treated foam surround, strontium ferrite woofer magnet, and powder-coated stamped-steel basket. Its basket construction provides a stable frame for the compact driver. The set is sold as two speakers for stereo installation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has sufficient space for the 2.36-inch overall diameter, 2.05-inch cutout, 1.26-inch mounting depth, and 1.42-inch overall height before purchase. Match the speakers to a 4-ohm audio system and keep amplifier power appropriate for the 10-watt RMS rating per speaker. The included fitment adapter may assist in compatible factory locations, though mounting and wiring requirements vary by vehicle.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614330904646,"sku":"CER-H25","price":89.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61K0-6ZdeRL.jpg?v=1784366396"},{"product_id":"cerwin-vega-h35-3-5-2-way-coaxial-speakers","title":"Cerwin-Vega H35 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H35 is a pair of compact 3.5-inch, 2-way coaxial car speakers designed for replacing factory speakers in space-limited locations. Each speaker combines a woofer and tweeter in one assembly, helping simplify a full-range speaker upgrade. It is suited to vehicles with compatible 3.5-inch factory locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith 40 watts RMS and 120 watts maximum power handling per speaker, the H35 is intended for use with a compatible factory radio or an appropriately matched aftermarket amplifier. Its 4-ohm nominal impedance suits common car-audio speaker circuits. The 84 Hz to 20 kHz published frequency response covers midrange and high-frequency duties in a compact format.\u003c\/p\u003e\u003cp\u003eThe H35 uses a responsive polypropylene woofer cone with a UV-treated foam surround. This material combination is designed to support controlled cone movement while adding resistance to sun-related wear. A strontium ferrite woofer magnet provides the motor structure for the woofer section.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI balanced-dome tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter. Built-in tweeter protection is included to help protect the high-frequency driver during demanding playback.\u003c\/p\u003e\u003cp\u003eFor a clean installation, the H35 has a 3.11-inch cutout requirement and a 1.54-inch mounting depth. Its rigid stamped-steel basket is powder coated, and the pair does not include grilles according to the manufacturer specification chart. Confirm vehicle-specific fitment, panel clearance, and mounting-hole alignment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports power matching with compatible head units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a lightweight cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Helps support long-term durability in vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Routes frequencies between drivers and protects the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H35 uses a powder-coated, rigid stamped-steel basket with a strontium ferrite woofer magnet. Its woofer uses a polypropylene cone and UV-treated foam surround, while the centrally mounted PEI balanced-dome tweeter uses a neodymium magnet. The set is sold as a pair and is specified without grilles.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 3.11-inch cutout, 1.54-inch mounting depth, and 3.43-inch speaker diameter before ordering. Mount the speakers securely to a flat baffle and seal the frame to reduce air leaks around the mounting surface. Observe speaker polarity when wiring and use an amplifier or receiver compatible with 4-ohm speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614349189190,"sku":"CER-H35","price":73.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_IM6REBML.jpg?v=1784366746"},{"product_id":"cerwin-vega-h40-4-2-way-coaxial-speaker-set","title":"Cerwin-Vega H40 4\" 2-Way Coaxial Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H40 is a pair of 4-inch, 2-way coaxial car speakers designed to replace compact factory speakers or support a custom full-range audio upgrade. Its coaxial layout places the tweeter and woofer together, helping simplify installation where space is limited. The set is intended for vehicle locations that accept a 4-inch speaker and have sufficient mounting clearance.\u003c\/p\u003e\u003cp\u003eRated at 50 watts RMS and 150 watts maximum, the H40 is suited to systems using a compatible factory radio or aftermarket amplification. Its 4-ohm nominal impedance matches the common impedance used by many car-audio speaker systems. The 85 Hz to 20 kHz frequency response focuses on midrange and high-frequency reproduction, with bass support available from larger speakers or a subwoofer when desired.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles the main vocal, midrange, and upper-bass duties. The UV-treated foam surround supports cone movement and is designed for durability in automotive use. With an 84 dB sensitivity rating, proper power matching and clean signal setup are important for getting the most from the speakers.\u003c\/p\u003e\u003cp\u003eThe H40 uses a dynamically balanced 1\/2-inch PEI tweeter with a neodymium magnet for high-frequency reproduction. An integrated crossover directs frequencies between the woofer and tweeter, while built-in tweeter protection helps safeguard the high-frequency driver. This design keeps the system compact without requiring an external crossover module.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the H40 can serve in dash, door, or other compact factory speaker positions when the vehicle's fitment and clearances match its measurements. It is sold as a stereo pair and includes mesh steel grilles for installations where the speakers are exposed. Confirm the 3.70-inch cutout requirement and 1.81-inch mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Rating:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides responsive midrange and upper-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2-Inch PEI Tweeter:\u003c\/strong\u003e Handles high frequencies in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Protection:\u003c\/strong\u003e Helps protect the tweeter during high-level playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Steel Grilles Included:\u003c\/strong\u003e Adds protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H40 uses a powder-coated, rigid stamped steel basket, a polypropylene cone, and a UV-treated foam surround. Its woofer uses a strontium ferrite magnet, while the tweeter uses a neodymium magnet. These materials support a compact, vehicle-oriented speaker design.\u003c\/p\u003e\u003cp\u003eMeasure the vehicle's opening, panel clearance, and window or mechanism clearance before mounting. The required cutout diameter is 94 mm (3.70 inches), and mounting depth is 46 mm (1.81 inches). Mount the speaker securely to a flat baffle, seal around the frame to reduce air leaks, observe polarity, and use a grommet where speaker wire passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614356267078,"sku":"CER-H40","price":86.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71k-d65oJQL.jpg?v=1784366793"},{"product_id":"cerwin-vega-h410-4x10-2-way-coaxial-speakers","title":"Cerwin-Vega H410 4\"x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H410 is a 4-inch by 10-inch, 2-way coaxial full-range speaker set for replacing compatible factory car speakers. It combines a woofer and tweeter in each speaker to cover bass, midrange, and high-frequency content from one mounting location. The set is sold as a pair for a matched left-and-right speaker upgrade.\u003c\/p\u003e\u003cp\u003eDesigned for vehicles using the uncommon 4-inch by 10-inch speaker format, the H410 helps retain a factory-style fit while updating worn or limited original speakers. Its 4-ohm nominal impedance suits typical mobile-audio speaker applications. Confirm the vehicle's opening dimensions, mounting depth, and panel clearance before installation.\u003c\/p\u003e\u003cp\u003eThe H410 is rated for 70 watts RMS and 210 watts maximum power handling. With a 90 Hz to 20 kHz frequency response and 89 dB sensitivity at 1 watt\/1 meter, it is intended for full-range playback in an appropriate vehicle installation. It can be used as part of a basic speaker replacement or in a system supported by a properly matched amplifier.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and UV-treated foam surround form the low- and mid-frequency section of each speaker. The coaxial 1-inch PEI tweeter is dynamically balanced and uses a neodymium magnet. An integrated crossover directs frequencies between the woofer and tweeter while providing tweeter protection.\u003c\/p\u003e\u003cp\u003eFor structural support, the H410 uses a rigid stamped-steel basket with a powder-coated finish and a strontium ferrite woofer magnet. Its 2.36-inch mounting depth can be useful where rear-deck or door-panel space is limited, but depth behind the mounting surface must be checked. The speakers do not include grilles according to the manufacturer specification table.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\"x10\" Coaxial Format:\u003c\/strong\u003e Fits compatible oval speaker openings with integrated full-range drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Separates woofer and tweeter frequency duties internally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and durability in vehicle use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H410 combines a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and neodymium tweeter magnet. Its rigid stamped-steel basket is powder coated, and the coaxial layout places the tweeter within the woofer assembly. This construction is designed for a conventional full-range vehicle-speaker installation.\u003c\/p\u003e\u003cp\u003eUse the 9.41-inch by 3.78-inch cutout requirement, 10.90-inch by 4.33-inch overall frame size, and 2.36-inch mounting depth to verify fitment. Mount the speakers securely to a flat baffle and seal the frame to help prevent air leaks; check window, trim-panel, and structural clearance before cutting. Observe speaker polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614358888518,"sku":"CER-H410","price":112.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71eb9fvlruL.jpg?v=1784366835"},{"product_id":"cerwin-vega-h46-4x6-2-way-coaxial-speakers","title":"Cerwin-Vega H46 4\"x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H46 is a pair of 4\" x 6\" 2-way coaxial full-range car speakers for replacing compatible factory speakers or refreshing an existing vehicle audio system. Its compact oval format is intended for vehicle locations that accept 4\" x 6\" speakers. The pair combines a woofer and centrally mounted tweeter to cover bass, midrange, and high-frequency playback from a single speaker location.\u003c\/p\u003e\u003cp\u003eEach H46 uses a polypropylene woofer cone with a UV-treated foam surround. This combination is designed to support responsive midbass and midrange reproduction while maintaining the cone's movement at the speaker edge. A 1\" PEI tweeter handles the upper frequencies for added detail in vocals, percussion, and instruments.\u003c\/p\u003e\u003cp\u003eThe H46 is rated for 50 watts RMS and 150 watts maximum power handling, with a 4-ohm nominal impedance. Its published frequency response is 83 Hz to 20 kHz, with a sensitivity rating of 83 dB at 1 watt\/1 meter. These specifications make it suited to compatible factory-radio replacement applications or systems using appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the woofer and tweeter, while tweeter protection is included to help safeguard the high-frequency driver. The tweeter uses a neodymium magnet, and the woofer uses a strontium ferrite magnet. Together, these components support the H46's coaxial design without requiring separate external crossover hardware.\u003c\/p\u003e\u003cp\u003eThe H46 is sold as a pair for matching left and right speaker positions. Its 1.73\" mounting depth can be helpful where installation space is limited, but vehicle fitment should still be checked before purchase. For a more complete audio upgrade, these speakers can be paired with a compatible 4-ohm source unit or amplifier and installed in properly sized factory or custom locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Reproduces high frequencies in the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a responsive woofer diaphragm for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between woofer and tweeter with tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H46 uses a responsive polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and powder-coated rigid stamped steel basket. A strontium ferrite woofer magnet and neodymium tweeter magnet are used in the driver assembly. The speakers are supplied as a matched pair and do not include grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4\" x 6\" speaker and compare available space with the 5.71\" x 3.50\" cutout requirement, 1.73\" mounting depth, and 6.10\" x 4.02\" overall dimensions. Use a compatible 4-ohm audio source or amplifier, and follow vehicle-specific wiring and mounting practices. Because fitment hardware and wiring accessories are not specified, installers should verify what their vehicle requires before installation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614360395846,"sku":"CER-H46","price":86.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71kZfYP6ewL.jpg?v=1784366870"},{"product_id":"cerwin-vega-h52-5-25-2-way-coaxial-speaker-set","title":"Cerwin-Vega H52 5.25\" 2-Way Coaxial Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H52 is a pair of 5.25-inch, 2-way coaxial car speakers for replacing worn factory speakers or building a compact full-range system. Each speaker combines a woofer and centrally mounted tweeter to cover bass, midrange, and high-frequency content from one mounting location. It is designed for vehicles with suitable 5.25-inch speaker locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith a 70W RMS and 210W maximum power rating, the H52 is suited to factory-radio upgrades as well as compatible aftermarket amplification. Its 4-ohm nominal impedance is common in mobile-audio systems. The 88Hz-20kHz frequency response emphasizes full-range playback, while deeper bass is typically handled by a separate subwoofer when desired.\u003c\/p\u003e\u003cp\u003eThe H52 uses a polypropylene woofer cone to reproduce midrange and lower-frequency detail. A UV-treated foam surround supports cone movement while helping the speaker withstand the changing conditions found in vehicle interiors. The result is a practical coaxial format for daily driving and straightforward speaker replacement projects.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter, while built-in tweeter protection is intended to help guard against excessive high-frequency stress. This arrangement keeps the installation simpler than a separate-component speaker system.\u003c\/p\u003e\u003cp\u003eA strontium ferrite woofer magnet and powder-coated stamped-steel basket provide the speaker's motor and mounting structure. The 1.77-inch mounting depth can be useful where door or rear-deck space is limited, but vehicle-specific clearance should always be checked before installation. Mesh grilles are included for installations where the speakers are exposed rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in a compact, single-speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports use with compatible factory radios or aftermarket amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Handles high-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Helps divide frequencies between drivers and protect the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Grilles Included:\u003c\/strong\u003e Adds protection for custom or exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H52 uses a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and a powder-coated rigid stamped-steel basket. Its coaxial layout places the PEI tweeter within the woofer assembly, reducing the number of separate components needed for a conventional speaker upgrade. The speakers are sold as a pair and include mesh grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the intended location accepts a 5.25-inch speaker and check the 4.45-inch cutout diameter, 5.08-inch overall diameter, and 1.77-inch mounting depth before ordering. Mount the speaker securely to a flat, sealed baffle surface, keep wiring protected from sharp metal edges, and observe speaker polarity. The H52 can be used in door or rear-deck locations where the vehicle provides sufficient clearance.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614361083974,"sku":"CER-H52","price":114.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71DvSPDxeAL.jpg?v=1784366908"},{"product_id":"cerwin-vega-h652-6-5-2-way-coaxial-speakers","title":"Cerwin-Vega H652 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H652 is a pair of 6.5-inch, 2-way coaxial full-range car speakers designed for replacing compatible factory speakers or building a straightforward speaker upgrade. Each speaker combines a woofer and tweeter in one assembly, helping deliver a broad frequency range from a standard-size mounting location. The pair is rated for 90 watts RMS and 270 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eThis HED Series model is intended for listeners who want clearer full-range sound from a 6.5-inch speaker position without moving to a separate component-speaker setup. Its 4-ohm nominal impedance is suited to common car-audio speaker systems that support 4-ohm loads. Confirm your vehicle's opening, mounting depth, and wiring arrangement before installation.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles bass and midrange duties, while the 1-inch PEI tweeter reproduces higher frequencies. The tweeter uses a neodymium magnet and a dynamically balanced design. Together, the coaxial layout provides a compact full-range solution for front or rear speaker locations where fitment permits.\u003c\/p\u003e\u003cp\u003eThe H652 uses an integrated crossover with tweeter protection to manage the handoff between the woofer and tweeter. This design supports smoother frequency transitions while helping protect the tweeter during higher-volume operation. The speaker's specified frequency response is 89 Hz to 20 kHz, with an 88 dB sensitivity rating at 1W\/1M.\u003c\/p\u003e\u003cp\u003eFor a complete vehicle system, the H652 can be used as a compatible replacement pair or combined with additional speakers and appropriate amplification. Its 1.77-inch mounting depth can be useful where door or rear-deck clearance is limited, but vehicle fitment should always be measured. Mesh grilles are included for installations where the speakers are exposed rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 1-inch tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Power Handling:\u003c\/strong\u003e Supports systems matched to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Handles bass and midrange reproduction in a durable cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Provides the woofer with a durable, compliant outer suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter and includes tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Uses a rigid, powder-coated steel frame to support the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H652 uses a polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and strontium ferrite woofer magnet. Its basket is a powder-coated, rigid stamped-steel design. The speakers include mesh grilles and are sold as a pair.\u003c\/p\u003e\u003cp\u003eVerify a 4.88-inch cutout, 1.77-inch mounting-depth clearance, and 6.26-inch overall-diameter clearance at the intended location before purchase. Wire each speaker with correct polarity to a compatible 4-ohm car-audio channel. Use the included mesh grilles when the installation does not retain a suitable factory grille or panel.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614361935942,"sku":"CER-H652","price":121.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/710ZSqpN0iL.jpg?v=1784366950"},{"product_id":"cerwin-vega-h653-6-5-3-way-coaxial-speakers","title":"Cerwin-Vega H653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H653 is a pair of 6.5-inch, 3-way coaxial car speakers designed as a direct full-range upgrade from many factory door or rear-deck speakers. Each speaker combines a woofer, dedicated midrange driver, and tweeter in one assembly. This format helps add more complete sound coverage without requiring separate component crossovers.\u003c\/p\u003e\u003cp\u003eThe H653 uses a 6.5-inch polypropylene woofer for the lower frequencies, a 2.5-inch midrange for vocal and instrumental detail, and a 1-inch PEI balanced-dome tweeter for upper-frequency reproduction. Its published frequency response is 89 Hz to 20 kHz. With a 4-ohm nominal impedance, it is intended for conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003ePower handling is rated at 90 watts RMS and 270 watts peak per speaker. The pair is rated for 180 watts RMS and 540 watts peak combined. Its 88 dB sensitivity rating and integrated crossover make it suitable for use with a compatible factory radio or an external amplifier matched appropriately to the speakers.\u003c\/p\u003e\u003cp\u003eDurability-focused construction includes polypropylene cones, UV-treated foam surrounds, ferrite woofer magnets, and powder-coated stamped-steel baskets. The coaxial layout keeps the midrange and tweeter integrated with the woofer, simplifying installation where space is limited. Built-in tweeter protection is included as part of the internal crossover network.\u003c\/p\u003e\u003cp\u003eThe H653 is suited to listeners replacing worn factory speakers or building a straightforward full-range system in compatible factory locations. It can be used in door or rear-deck positions when the mounting dimensions and available depth are confirmed. For systems seeking deeper low bass, these speakers can be paired with a separate subwoofer and properly configured amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports 90 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Midrange Driver:\u003c\/strong\u003e Handles important midrange information between bass and treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail with a neodymium magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover Protection:\u003c\/strong\u003e Includes tweeter protection without an external crossover box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H653 uses a powder-coated, rigid stamped-steel basket with a ferrite woofer magnet, polypropylene cone, and UV-treated foam surround. Its 1-inch PEI tweeter and 2.5-inch midrange are mounted concentrically with the 6.5-inch woofer. The manufacturer specification sheet also lists grilles for this model.\u003c\/p\u003e\u003cp\u003eConfirm both the 4.88-inch cutout requirement and 1.77-inch mounting-depth requirement before installation, as factory 6.5-inch locations can vary by vehicle. Wire each speaker with correct polarity and use a compatible 4-ohm speaker channel. The integrated crossover simplifies hookup, but vehicle-specific mounting adapters, harnesses, or hardware may still be required depending on the installation location.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614362394694,"sku":"CER-H653","price":194.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71XYe0aitoL.jpg?v=1784366996"},{"product_id":"cerwin-vega-h65c-6-5-2-way-component-speaker-set","title":"Cerwin-Vega H65C 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H65C is a 6.5-inch, 2-way component speaker set designed for upgrading a vehicle’s front-stage audio. It separates the woofer and tweeter so they can be positioned independently for a more focused listening area than a typical coaxial speaker. The set is suited to factory-speaker replacements and custom car-audio installations where mounting space permits.\u003c\/p\u003e\u003cp\u003eA 6.5-inch polypropylene woofer handles bass and midrange duties, while the separate 1-inch PEI tweeter handles upper-frequency detail. This arrangement is intended to produce balanced output across its rated 88 Hz to 20 kHz frequency response. With 87 dB sensitivity and a 4-ohm nominal impedance, it is designed for common car-audio speaker applications.\u003c\/p\u003e\u003cp\u003eThe H65C is rated for 120 watts RMS and 360 watts maximum power handling. Its 79 Hz free-air resonance and polypropylene-cone woofer support a clear, controlled midbass foundation within a properly installed system. The 1-inch tweeter uses a neodymium magnet and dynamically balanced PEI construction for high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eDurability-focused construction includes a UV-treated foam surround, ferrite woofer magnet, and powder-coated stamped-steel basket. The rigid basket provides a stable mounting structure for the woofer, while the treated surround is intended for automotive use. An integrated crossover with tweeter protection manages the handoff between the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThis component set can be used when replacing separate factory woofer-and-tweeter systems or when building a custom front stage. Its 4.88-inch cutout diameter and 1.77-inch mounting depth should be checked against the vehicle’s available door, kick-panel, or custom-mounting space. Mesh grilles are included for installations where the drivers require added physical protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a more tailored installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched within the rated continuous-power range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Handles midbass and midrange reproduction with a responsive design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Reproduces high frequencies with a neodymium magnet assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected Crossover:\u003c\/strong\u003e Directs frequencies to the appropriate driver and protects the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Adds durability for long-term automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H65C uses polypropylene woofer cones, UV-treated foam surrounds, strontium ferrite woofer magnets, and dynamically balanced PEI tweeters with neodymium magnets. Each woofer is built around a powder-coated, rigid stamped-steel basket. The set also includes mesh grilles.\u003c\/p\u003e\u003cp\u003eConfirm the 4.88-inch cutout, 6.26-inch overall diameter, 1.77-inch mounting depth, and 2.13-inch overall height before installation. The component system uses crossovers between the amplifier or speaker-output connection, woofer, and tweeter, so correct polarity should be maintained throughout wiring. Install crossover components in a protected, ventilated location away from moisture and factory wiring looms where practical.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614381760582,"sku":"CER-H65C","price":212.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/719eAiubzgL.jpg?v=1784367351"},{"product_id":"cerwin-vega-h672-6-75-2-way-coaxial-speakers","title":"Cerwin-Vega H672 6.75\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H672 is a pair of 6.75-inch, 2-way coaxial car speakers designed to replace worn or basic factory door speakers. Its coaxial layout places the tweeter and woofer together, helping simplify installation where a single full-range speaker location is available. The set is intended for vehicle audio upgrades using a compatible factory radio or aftermarket amplifier.\u003c\/p\u003e\u003cp\u003eEach H672 combines a polypropylene woofer cone with a 1-inch PEI tweeter for full-range playback. The stated 87 Hz–20 kHz frequency response focuses this pair on midbass, midrange, and high-frequency detail rather than sub-bass reproduction. A 4-ohm nominal impedance supports use with common car-audio speaker outputs.\u003c\/p\u003e\u003cp\u003eWith 90 watts RMS and 270 watts maximum power handling, the H672 can be matched with amplification that delivers appropriate continuous power at 4 ohms. Its 86 dB sensitivity rating provides a useful reference when comparing output expectations with other speakers. For a balanced system, a subwoofer can be added separately for lower-frequency bass reproduction.\u003c\/p\u003e\u003cp\u003eThe woofer uses a UV-treated foam surround and a strontium ferrite magnet. Cerwin-Vega also specifies a powder-coated stamped-steel basket to provide a rigid mounting structure. These materials support the speaker's intended in-vehicle use while retaining the compact mounting profile of a coaxial design.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the woofer and tweeter, while tweeter protection is included in the design. This makes the H672 a practical choice for listeners seeking a straightforward full-range speaker replacement without separate external crossover modules. The speakers are sold as a pair for left-and-right installation positions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.75-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the main midbass and midrange output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Divides frequencies between woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports durability around the woofer cone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H672 uses a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and dynamically balanced PEI tweeter with a neodymium magnet. Its powder-coated, rigid stamped-steel basket is designed to support stable mounting. Cerwin-Vega lists an integrated crossover with tweeter protection as part of the speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, and mounting-hole pattern before ordering. The stated cutout requirement is 5.59 inches and the mounting depth is 1.73 inches; adapters, harnesses, screws, or other vehicle-specific installation parts are not confirmed as included. Use a compatible 4-ohm speaker output and observe correct positive and negative polarity when wiring each speaker.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614384152646,"sku":"CER-H672","price":173.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61HeN4qfFhL.jpg?v=1784367390"},{"product_id":"cerwin-vega-h683-6x8-3-way-coaxial-speakers","title":"Cerwin-Vega H683 6x8\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H683 is a pair of 6x8-inch, 3-way coaxial full-range car speakers designed for factory-location speaker upgrades. It combines a woofer, midrange, and tweeter in each speaker to provide broad frequency coverage from a single mounting position. This makes it a practical option for vehicles that use the common 6x8-inch speaker format.\u003c\/p\u003e\u003cp\u003eEach H683 uses a 6x8-inch polypropylene woofer, a 2.5-inch midrange, and a 1-inch PEI tweeter. The multi-driver coaxial layout is intended to reproduce bass, vocal-range detail, and high frequencies without requiring separate component-speaker mounting locations. Its published frequency response is 87 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eThe polypropylene woofer cone is paired with a UV-treated foam surround for a durable moving assembly. A strontium ferrite woofer magnet supports the low- and mid-frequency section, while the PEI tweeter uses a neodymium magnet motor structure. This combination is built around the needs of everyday in-car listening and replacement-speaker installations.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the speaker elements and includes tweeter protection. That design helps the 1-inch balanced PEI tweeter handle high-frequency content as part of the coaxial assembly. The H683 has a 4-ohm nominal impedance and 87 dB sensitivity at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eSold as a pair, the H683 can be used with a compatible factory radio or an aftermarket amplifier that supports 4-ohm speakers. Its 2.28-inch mounting depth and 5 x 7.09-inch cutout requirement should be checked against the vehicle's available mounting space before installation. It is suited to listeners replacing worn factory 6x8-inch speakers while retaining a straightforward full-range speaker layout.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x8-Inch Woofer:\u003c\/strong\u003e Fits applications designed for 6x8-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer's primary sound-radiating surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement with UV-treated material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Handles the high-frequency portion of the audio range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Protection:\u003c\/strong\u003e Adds protection within the built-in crossover network.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H683 uses powder-coated rigid stamped-steel baskets, polypropylene woofer cones, UV-treated foam surrounds, and ferrite woofer magnets. Its coaxial structure places the 2.5-inch midrange and 1-inch dynamically balanced PEI tweeter over the woofer. The pair is finished in black and red and does not include speaker grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x8-inch speaker, has a 5 x 7.09-inch mounting cutout, and provides at least 2.28 inches of mounting depth. Connect the speakers with correct polarity to a 4-ohm-compatible head unit or amplifier. Mounting hardware and vehicle-specific adapters are not identified in the available product documentation, so verify required installation parts before purchase.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614388576326,"sku":"CER-H683","price":107.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71J4E8p-W9L.jpg?v=1784367442"},{"product_id":"cerwin-vega-h693-6x9-inch-3-way-coaxial-speakers","title":"Cerwin-Vega H693 6x9-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H693 is a pair of 6x9-inch, 3-way coaxial car speakers for replacing factory door, rear-deck, or hatch-area speakers where this size is supported. Each speaker combines its woofer, midrange, and tweeter in a single assembly to simplify a full-range upgrade. It is designed for vehicle audio systems using 4-ohm speakers.\u003c\/p\u003e\u003cp\u003eThis speaker set is suited to listeners who want a more complete frequency presentation from a conventional 6x9-inch location without installing separate component drivers. The 6x9-inch woofer handles the main bass and midrange range, while the dedicated 2.5-inch midrange and 1-inch tweeter support higher-frequency detail. Its published response range is 90 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and UV-treated foam surround form the primary moving assembly. This combination is intended to provide controlled cone movement while supporting long-term use in an automotive environment. The woofer uses a ferrite magnet motor structure.\u003c\/p\u003e\u003cp\u003eThe H693 uses a dynamically balanced 1-inch PEI tweeter to reproduce treble information. An integrated crossover directs frequencies among the speaker elements, and built-in tweeter protection is included. Together, these features keep the installation self-contained rather than requiring a separate external crossover.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 150 watts maximum power handling, the H693 can be used with a compatible factory radio or a properly configured external amplifier. It is sold as a pair for left\/right stereo installation. Verify vehicle fitment, mounting clearance, and wiring connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Woofer:\u003c\/strong\u003e Fits applications designed for the common oval speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Midrange:\u003c\/strong\u003e Adds dedicated coverage for vocal and instrument frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Reproduces upper-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer’s primary sound-producing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies internally and includes tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H693 uses a responsive polypropylene cone, UV-treated foam surround, ferrite woofer magnet, and powder-coated rigid stamped-steel basket. The coaxial driver assembly places the 2.5-inch midrange and 1-inch PEI tweeter within the 6x9-inch speaker format. This construction is intended for an all-in-one full-range car-speaker installation.\u003c\/p\u003e\u003cp\u003eCheck that the intended location accepts a 6x9-inch speaker and confirm the published 90 mm (3.54-inch) mounting-depth requirement before purchase. The manufacturer lists overall and cutout dimensions of 236 x 162.5 mm (9.29 x 6.40 inches), so vehicle-specific adapters, brackets, harnesses, or hardware may be needed depending on the application. Connect each speaker with correct polarity and use an amplifier or radio that supports a 4-ohm load.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614392213574,"sku":"CER-H693","price":101.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pJ5e0rw7L.jpg?v=1784367487"},{"product_id":"cerwin-vega-h69c-6-9-2-way-component-speaker-set","title":"Cerwin-Vega H69C 6×9\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H69C is a 6×9-inch, 2-way component speaker set designed for vehicle audio upgrades that need separate woofer and tweeter placement. It combines a pair of 6×9-inch woofers, separate 1-inch tweeters, and passive crossover networks. This layout helps replace limited factory speaker performance while allowing more intentional high-frequency placement.\u003c\/p\u003e\u003cp\u003eThe H69C is rated for 150 watts RMS and 450 watts maximum power per side at 4 ohms. With a 90 dB sensitivity rating and a 90 Hz to 20 kHz frequency response, it is suited to full-range front-stage or rear-deck applications. Its sound profile is built around solid midbass output, clear midrange reproduction, and dedicated high-frequency detail.\u003c\/p\u003e\u003cp\u003eEach woofer uses a responsive polypropylene cone with a UV-treated foam surround. The cone material is intended to maintain controlled bass and midrange response, while the surround supports long-term movement and durability. A strontium ferrite woofer magnet and rigid stamped-steel basket complete the main driver structure.\u003c\/p\u003e\u003cp\u003eSeparate 1-inch PEI balanced-dome tweeters handle the upper frequencies. The tweeters use neodymium magnets and connect through the included passive crossovers. Integrated tweeter protection is designed to help manage high-frequency delivery when the system is played at elevated levels.\u003c\/p\u003e\u003cp\u003eThe H69C is a component set rather than a drop-in coaxial speaker, so installation requires space for the woofers, tweeters, and crossover networks. It can be used with a compatible factory or aftermarket radio, but an amplifier matched appropriately to its 4-ohm load and RMS rating can provide additional headroom. It is a practical choice for systems where speaker placement and separation are part of the upgrade plan.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6×9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to 150 watts RMS per side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Provide controlled bass and balanced midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeters:\u003c\/strong\u003e Handle high frequencies with a balanced-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to each speaker driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Protection:\u003c\/strong\u003e Adds protection within the integrated crossover network.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H69C uses polypropylene woofer cones, UV-treated foam surrounds, strontium ferrite woofer magnets, and powder-coated rigid stamped-steel baskets. The separate tweeters use PEI balanced domes with neodymium magnets. Mesh grilles are included for installations where the speakers require added physical protection.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's available mounting space before installation: each woofer requires a 5.93×8.68-inch cutout and 3.17 inches of mounting depth. Mount the passive crossovers in a protected, ventilated location away from moisture, then connect the amplifier or radio output to the crossover input, the woofer to the MID output, and the tweeter to the TWT output while observing polarity. For tweeter flush mounting, the installation guide specifies a 1.85-inch opening and at least 1 inch of panel clearance behind the mounting location.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614395260998,"sku":"CER-H69C","price":248.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71evkJWfu9L.jpg?v=1784367531"},{"product_id":"cerwin-vega-h7410-4x10-2-way-coaxial-speakers","title":"Cerwin-Vega H7410 4x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7410 is a pair of 4x10-inch, 2-way coaxial car speakers designed as a replacement for vehicles using this uncommon factory speaker size. It combines a woofer and tweeter in each speaker for full-range reproduction from a single mounting location. This makes it a practical upgrade for replacing worn or underperforming factory speakers without adding separate component tweeters.\u003c\/p\u003e\u003cp\u003eRated for 50 watts RMS and 320 watts maximum power handling, the H7410 is suited to systems built around a compatible factory radio or aftermarket amplification. Its 4-ohm nominal impedance matches the common load used by many car-audio speaker outputs. The 50 Hz to 20 kHz frequency-response specification supports bass, midrange, and treble reproduction within its intended full-range role.\u003c\/p\u003e\u003cp\u003eEach H7410 uses a 4x10-inch polypropylene cone with a treated-foam surround, backed by a ferrite ceramic magnet. The coaxial layout also incorporates a 1-inch balanced PEI black polypropylene dome tweeter for high-frequency detail. An internal crossover is included to direct the appropriate frequency ranges within the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe speaker is built around a stamped-steel vented frame and a graphite-injected reinforced spun cone design. A linear woven treated red spider supports cone movement, while the single 1-inch voice coil is specified for the speaker's power-handling range. These construction details focus on stable mounting and consistent operation in an automotive environment.\u003c\/p\u003e\u003cp\u003eThe H7410 is intended for direct replacement in compatible 4x10-inch locations, including applicable rear-deck and factory mounting positions. Its 9.4 x 3.8-inch mounting opening and 2.4-inch mounting depth should be checked against the vehicle before installation. It can serve as a straightforward factory-speaker replacement or as part of a broader head-unit, amplifier, and speaker upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x10-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Separates high-frequency reproduction from the main cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports continuous power up to its rated level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches a common car-audio speaker load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7410 uses a stamped-steel vented basket, ferrite ceramic magnet, treated-foam surround, and polypropylene cone. Its listed construction also includes a graphite-injected reinforced spun cone, linear woven treated red spider, and 1-inch balanced PEI black polypropylene dome tweeter. No grille is specified for this model.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting opening, depth, mounting-hole pattern, and panel clearance before purchase; the listed mounting diameter is 9.4 x 3.8 inches and mounting depth is 2.4 inches. A secure, well-sealed mounting surface helps isolate the front and rear sound waves from the speaker. Use protected wiring when routing through metal panels, and match the amplifier or radio output to the speaker's 4-ohm impedance and 50-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614505033798,"sku":"CER-H7410","price":75.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61EqzRsEG_L.jpg?v=1784367676"},{"product_id":"cerwin-vega-h746-4x6-2-way-coaxial-car-speakers","title":"Cerwin-Vega H746 4\"x6\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H746 is a pair of 4\" x 6\" HED Series coaxial car speakers designed to replace factory speakers in compatible vehicle locations. Its compact format is suited to many door, dash, and rear-deck applications that use a 4\" x 6\" opening. The two-way design combines woofer and tweeter elements in each speaker for a straightforward full-range upgrade.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who want clearer everyday playback from a factory radio or a modest aftermarket system. With 40 watts RMS handling per speaker and a 4-ohm load, they can be matched with compatible head-unit power or an appropriately rated amplifier. Their 86 dB sensitivity specification provides a useful reference when comparing output requirements with other speakers.\u003c\/p\u003e\u003cp\u003eThe H746 uses a polypropylene cone with a treated-foam surround to handle midrange and lower-frequency duties. A 1-inch balanced-dome PEI tweeter is used for high-frequency reproduction. Together, the coaxial layout keeps the installation compact while covering the listed 60 Hz to 20 kHz frequency-response range.\u003c\/p\u003e\u003cp\u003eIts construction includes a stamped-steel basket and ferrite magnet motor structure. The speaker also uses a 1-inch voice coil and an internal crossover, so a separate external passive crossover is not required for its integrated tweeter. These details make the H746 a practical replacement-speaker design rather than a component-speaker system.\u003c\/p\u003e\u003cp\u003eThe H746 can be used as a direct-size replacement where vehicle fitment, mounting depth, and cutout dimensions are confirmed before installation. It is sold as a pair, providing left and right speakers for one 4\" x 6\" location pair. For a more extensive audio upgrade, it can be paired with compatible wiring, mounting hardware, sound treatment, and amplification selected for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Size:\u003c\/strong\u003e Fits applications designed for this compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports continuous power handling for compatible systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies between the integrated drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H746 uses a polypropylene cone, treated-foam surround, Mylar diaphragm material, stamped-steel basket, and ferrite ceramic magnet. Its integrated 1-inch PEI balanced-dome tweeter and internal crossover keep the speaker assembly self-contained. The construction is designed for standard in-vehicle speaker replacement use.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 4\" x 6\" speakers and verify the 5.6\" x 3.5\" mounting cutout and 1.8\" mounting-depth requirements before purchase. Connect each speaker to a compatible 4-ohm channel and use secure mounting hardware and correct-polarity wiring. Factory-grille clearance, adapter brackets, wiring harnesses, and installation accessories should be checked for the specific vehicle because they are not confirmed as included.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614614872134,"sku":"CER-H746","price":69.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61bcfLYtHIL.jpg?v=1784367722"},{"product_id":"cerwin-vega-h752-5-25-2-way-coaxial-car-speakers","title":"Cerwin-Vega H752 5.25\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H752 is a 5.25-inch, 2-way coaxial speaker set designed to replace factory car speakers in compatible door, dash, or rear-deck locations. It combines a woofer and tweeter in each speaker, helping simplify an audio upgrade where separate component speakers are not required. With a 4-ohm nominal impedance, the set is suited to common car-audio speaker applications.\u003c\/p\u003e\u003cp\u003eThis HED Series model is intended for listeners who want clearer everyday playback from a compact speaker size. Its 60 Hz to 20 kHz frequency response covers bass and midrange fundamentals along with high-frequency detail. The 1-inch balanced dome tweeter is integrated into the coaxial design to reproduce upper-frequency content from the same mounting location.\u003c\/p\u003e\u003cp\u003eThe H752 is rated for 40 watts RMS and 275 watts maximum power handling per speaker. That rating makes it appropriate for use with a compatible factory head unit or an aftermarket amplifier matched to its continuous power capability. For amplifier installations, proper gain setting is important to avoid clipping and speaker damage.\u003c\/p\u003e\u003cp\u003eIts polypropylene cone, treated foam surround, and ferrite magnet motor are paired with a stamped-steel basket. These materials support a practical replacement-speaker design while the internal crossover directs frequencies within the coaxial assembly. The speaker also uses a 1-inch voice coil and a Mylar diaphragm material.\u003c\/p\u003e\u003cp\u003eWith a 1.85-inch mounting depth and 4.4-inch mounting diameter, the H752 can fit many 5.25-inch speaker locations when vehicle-specific clearance is confirmed. It is supplied as a pair, allowing both speakers in a matched location to be upgraded together. Verify the factory opening, mounting depth, adapter requirements, and connector style before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Configuration:\u003c\/strong\u003e Supports full-range playback from a compact speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Rating:\u003c\/strong\u003e Provides a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Forms the woofer’s main sound-producing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Integrates frequency division within the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H752 uses a polypropylene cone with a treated foam surround, Mylar diaphragm material, ferrite magnet, and stamped-steel basket. A 1-inch balanced PEI dome tweeter is mounted within the coaxial assembly. The speaker is specified with a single voice coil and an internal crossover.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 5.25-inch speaker with a 4.4-inch mounting diameter and 1.85-inch mounting depth before purchase. Use appropriate vehicle-specific speaker adapters or wiring harnesses when the factory mounting pattern or connector differs. The speakers are 4-ohm units and should be connected with correct polarity to a compatible head unit or amplifier.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614680768582,"sku":"CER-H752","price":75.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/612spbCQT9L.jpg?v=1784367766"},{"product_id":"cerwin-vega-h7652-6-5-2-way-coaxial-car-speakers","title":"Cerwin-Vega H7652 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7652 is a pair of 6.5-inch HED Series 2-way coaxial car speakers designed for replacing compatible factory door or rear-deck speakers. Its coaxial layout places a tweeter over the woofer, allowing both drivers to fit within a single speaker location. The result is a straightforward full-range speaker upgrade for vehicles with suitable mounting space.\u003c\/p\u003e\u003cp\u003eEach H7652 speaker is rated for 60 watts RMS and 320 watts maximum power handling. The pair is rated for 120 watts RMS and 640 watts maximum power handling. Its 4-ohm nominal impedance is suited to common vehicle audio systems and compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and treated foam surround form the low- and mid-frequency section of the speaker. The centrally mounted 1-inch balanced PEI dome tweeter is intended to handle high-frequency detail within the same assembly. This 2-way arrangement keeps vocals, instruments, and high-frequency content together in one compact replacement speaker.\u003c\/p\u003e\u003cp\u003eThe H7652 uses a stamped-steel basket and ferrite magnet motor structure. It also has a 1-inch high-temperature voice coil and an internal crossover. These elements support a conventional coaxial-speaker design without requiring a separate external passive crossover.\u003c\/p\u003e\u003cp\u003eWith a 5.7-inch mounting cutout requirement and approximately 2.24 inches of mounting depth, the H7652 is intended for many 6.5-inch speaker locations. It can be used in doors or rear decks when the vehicle provides adequate clearance. Confirm mounting depth, cutout diameter, screw pattern, and grille clearance before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Driver System:\u003c\/strong\u003e Uses dedicated woofer and tweeter sections for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Per Speaker:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio speaker output configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7652 combines a polypropylene cone, treated foam surround, mylar diaphragm material, ferrite magnet, and stamped-steel basket. A balanced PEI dome tweeter is mounted concentrically with the woofer. Speaker grilles are included for installations where grille protection is needed.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 5.7-inch cutout and approximately 2.24 inches of top-mount depth before installation. Mount the speaker securely to a flat baffle and seal around the frame to reduce air leaks. When routing replacement wire through metal panels, use grommets and observe correct positive and negative polarity.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614754496582,"sku":"CER-H7652","price":75.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61OXfm3QZOL.jpg?v=1784367807"},{"product_id":"cerwin-vega-h7653-6-5-3-way-coaxial-speakers","title":"Cerwin-Vega H7653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7653 is a 6.5-inch, 3-way coaxial speaker set designed to replace compatible factory door or rear-deck speakers. Its all-in-one coaxial layout combines low-, mid-, and high-frequency drivers in each speaker, helping simplify an audio-system upgrade. It is intended for listeners seeking clearer, fuller sound from a standard 4-ohm car-audio speaker position.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS power handling and 340 watts maximum power handling, the H7653 is suited to appropriately matched factory radios or aftermarket amplification. Its 50 Hz to 20 kHz stated frequency response covers bass, vocal, and treble ranges within a compact speaker format. The 3-way arrangement is designed to add midrange detail and high-frequency definition beyond a basic single-cone factory speaker.\u003c\/p\u003e\u003cp\u003eThe H7653 uses a single 4-ohm voice coil, making it compatible with many conventional car-audio speaker outputs. An internal crossover is included to direct frequencies among the speaker's integrated drivers. This avoids the need to add a separate external crossover for the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eIts construction includes a stamped-steel basket and ferrite ceramic magnet, with a polypropylene cone, treated-foam surround, and Mylar diaphragm listed in the manufacturer specifications. Other published product information identifies a treated red spider and a balanced PEI\/polypropylene dome tweeter. Together, these elements support a durable replacement-speaker design for everyday vehicle use.\u003c\/p\u003e\u003cp\u003eThe H7653 can be considered for vehicles with 6.5-inch speaker locations when the mounting cutout and behind-panel clearance are confirmed first. It works as a practical front-door or rear-deck upgrade and can be paired with an aftermarket head unit or amplifier matched to its 4-ohm load and RMS rating. For systems needing deeper low bass, a separate subwoofer remains the appropriate addition.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports amplifier or radio power matched to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Load:\u003c\/strong\u003e Works with many standard car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Routes frequencies between the integrated speaker drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Fitment:\u003c\/strong\u003e Designed for compatible 6.5-inch door or rear-deck locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7653 uses a stamped-steel basket, ferrite ceramic magnet, polypropylene cone, treated-foam surround, and 1-inch voice coil. Its coaxial format places the additional midrange and high-frequency drivers over the main woofer, conserving space compared with a separate component-speaker layout. The speaker includes an internal crossover and uses a single 4-ohm voice coil.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's opening and clearance with the listed 5.7-inch (145 mm) mounting diameter and approximately 2.09-inch (53 mm) mounting depth. Mount the speaker securely to a flat baffle and seal around its frame to limit air leaks; check door-window travel before installation in a door. Use correct polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614853488710,"sku":"CER-H7653","price":88.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JI4nW0_8L.jpg?v=1784367856"},{"product_id":"cerwin-vega-h765c-6-5-2-way-component-speakers","title":"Cerwin-Vega H765C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe Cerwin-Vega H765C is a 6.5-inch, 2-way component speaker system designed to replace factory door or custom-location speakers. Its separate woofers and tweeters allow more flexible placement than a coaxial speaker, helping installers position high frequencies closer to the listener. It is intended for vehicle owners seeking a more detailed front-stage upgrade while retaining a conventional 4-ohm speaker load.\u003c\/p\u003e\u003cp\u003eEach side of the system combines a polypropylene woofer with a 1-inch PEI balanced-dome tweeter. This component layout separates midrange and high-frequency reproduction into dedicated drivers for clearer placement and tuning options. The published frequency response is 50 Hz to 20 kHz, covering the primary range used for music playback in a vehicle system.\u003c\/p\u003e\u003cp\u003eThe H765C is rated for 60 watts RMS and 400 watts maximum power handling per side. That makes it suitable for use with compatible factory-powered systems as well as aftermarket amplification matched appropriately to its 4-ohm impedance and RMS rating. Sensitivity is rated at 84.5 dB at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eIts woofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, and ferrite magnet structure. The dedicated tweeter uses a PEI diaphragm and neodymium magnet. These materials support a practical replacement-speaker design focused on stable mounting and separate high-frequency placement.\u003c\/p\u003e\u003cp\u003eExternal crossover networks are included to divide the signal between the woofers and tweeters. The set can serve as a front-speaker upgrade in doors, kick panels, or custom installations where the published mounting dimensions are suitable. It can also be paired with a compatible rear-speaker upgrade, amplifier, and subwoofer system as part of a broader car-audio build.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component Set:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Dedicated drivers handle midrange and high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports power-matched factory or aftermarket system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Provide a durable cone material for vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeters:\u003c\/strong\u003e Deliver dedicated high-frequency output through separate tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to each driver in the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H765C uses stamped-steel woofer baskets, polypropylene cones, treated-foam surrounds, ferrite woofer magnets, and neodymium tweeter magnets. Each woofer has a 1-inch voice coil, while the tweeters use PEI balanced-dome diaphragms. Grilles are included for installations where speaker protection or a finished appearance is needed.\u003c\/p\u003e\u003cp\u003eVerify vehicle fitment before purchase using the 5.7-inch mounting cutout requirement and published 2.45-inch mounting depth. The package includes two woofers, two tweeters, two external crossover networks, tweeter flush mounts, tweeter surface mounts, connection cables, and mounting hardware. For amplified use, select an amplifier and wiring configuration compatible with the system's 4-ohm impedance and 60-watt RMS-per-side rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614944845894,"sku":"CER-H765C","price":151.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91aPBrEKU0L.jpg?v=1784367897"},{"product_id":"cerwin-vega-h7693-6x9-3-way-coaxial-speakers","title":"Cerwin-Vega H7693 6x9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7693 is a pair of 6x9-inch HED Series 3-way coaxial car speakers designed to replace factory speakers in compatible vehicle locations. They provide a full-range upgrade in a single speaker assembly, helping simplify installations where separate component speakers are not required. The pair is suited to rear decks, doors, and custom panels when the vehicle has adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eIts 3-way coaxial layout combines woofer, midrange, and high-frequency drivers in each speaker. This arrangement is intended to cover bass, vocal, and treble ranges from one mounting location. With a 50 Hz to 20 kHz frequency-response rating, the H7693 is designed for broad everyday music playback.\u003c\/p\u003e\u003cp\u003eThe H7693 is rated for 70 watts RMS and 420 watts maximum power handling per speaker. Its 4-ohm single-voice-coil design is compatible with many factory and aftermarket car-audio systems. An amplifier should be selected and configured with its continuous RMS output and impedance compatibility in mind.\u003c\/p\u003e\u003cp\u003eConstruction includes a polypropylene cone, treated-foam surround, ferrite magnet, and stamped-steel basket. Cerwin-Vega specifies a Mylar diaphragm and a PEI black polypropylene dome tweeter for high-frequency reproduction. An internal crossover is included to divide the signal among the coaxial drivers.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the H7693 can be used as a direct full-range speaker replacement or paired with an appropriately matched aftermarket amplifier. Its 86.5 dB sensitivity rating and 4-ohm impedance should be considered when planning output levels and amplifier power. Verify vehicle-specific fitment, mounting-hole dimensions, and panel clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible rear-deck, door, and custom-panel locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and high-frequency drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Rating:\u003c\/strong\u003e Supports appropriately matched continuous amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Divides frequencies within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable woofer cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Supports stable mounting and speaker structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7693 uses a stamped-steel basket with a ferrite ceramic magnet, polypropylene cone, treated-foam surround, and single 1-inch voice coil. Its coaxial architecture keeps the drivers together in one assembly, while the internal crossover is built into the speaker. Cerwin-Vega specifies a 3-way configuration with a Mylar diaphragm and PEI black polypropylene dome tweeter.\u003c\/p\u003e\u003cp\u003eConfirm that the intended location accepts a 6x9-inch speaker and accommodates the 3.3-inch mounting depth before purchase. The specified mounting opening is 7.71 x 6.4 inches, so vehicle-specific brackets, adapters, or wiring connections may be needed depending on the application. Use correct polarity and match the speakers with a compatible 4-ohm factory radio or amplifier.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615613182022,"sku":"CER-H7693","price":96.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ep53CRjtL.jpg?v=1784368238"},{"product_id":"cerwin-vega-h7694-6x9-4-way-coaxial-car-speakers","title":"Cerwin-Vega H7694 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7694 is a pair of 6x9-inch HED Series 4-way coaxial car speakers designed as a full-range replacement for factory-installed speakers. They provide an all-in-one speaker solution for vehicles with compatible 6x9 mounting locations. The coaxial layout places multiple drivers in each speaker assembly, helping simplify an audio upgrade without separate external tweeter mounting.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want stronger, more detailed sound from a factory or aftermarket stereo system. With 75 watts RMS power handling per speaker and a 4-ohm nominal impedance, the H7694 can be used with compatible head-unit power or an appropriately matched external amplifier. Their 86.5 dB sensitivity specification and 50 Hz to 20 kHz frequency response support broad full-range reproduction.\u003c\/p\u003e\u003cp\u003eThe H7694 uses a 4-way coaxial design to combine low-, mid-, and high-frequency output from a compact 6x9-inch footprint. A 1-inch balanced-dome PEI tweeter is incorporated into the speaker assembly for high-frequency reproduction. This makes the pair a practical choice for rear-deck, door, or custom-panel speaker locations that accept the required dimensions.\u003c\/p\u003e\u003cp\u003eIts construction combines a polypropylene cone, treated-foam surround, Mylar diaphragm, ferrite magnet structure, and stamped-steel basket. The stamped-steel frame provides a rigid mounting foundation, while the internal crossover is built into the speaker design. These materials are selected for conventional automotive speaker installation and daily music playback.\u003c\/p\u003e\u003cp\u003eThe H7694 can serve as a direct speaker upgrade in a stock system or as part of a larger car-audio build with an aftermarket amplifier. Verify the vehicle's available mounting depth, cutout dimensions, mounting-hole layout, and window or trunk clearance before installation. For amplified systems, match amplifier output conservatively to the speaker's 75-watt RMS rating per speaker rather than selecting equipment solely by maximum-power figures.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Integrates multiple driver elements into each 6x9-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Supports amplifier matching at 75 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many conventional car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Creates a solid structure for mounting the speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Built-in crossover supports the coaxial driver arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7694 uses a stamped-steel basket, ferrite ceramic magnet, polypropylene cone, treated-foam surround, and Mylar diaphragm. Its 1-inch voice coil and single-voice-coil configuration are paired with a 1-inch PEI balanced-dome tweeter. Speaker grilles are included with the pair.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle can accept a 6x9-inch speaker, the 7.71 x 6.4-inch mounting cutout, and approximately 3.3 inches of mounting depth before purchase. Mount the speakers securely on a flat surface and seal the frame area to reduce air leaks; when wiring through metal, use suitable protection such as grommets. Maintain correct positive and negative polarity at both speakers, and check clearance for windows, trunk hardware, and interior panels before final assembly.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615631532102,"sku":"CER-H7694","price":107.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51dFOXKUIHL.jpg?v=1784368303"},{"product_id":"cerwin-vega-sm10f4-10-2-way-marine-coaxial-speakers","title":"Cerwin-Vega SM10F4 10\" 2-Way Marine Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM10F4 is a 10-inch 2-way coaxial marine speaker system designed for boat, powersports, and outdoor audio installations. It combines a large woofer with a centrally mounted titanium dome tweeter, helping cover bass and high-frequency detail from one flush-mount location. The 4-ohm design is suited to compatible marine amplifiers and audio systems.\u003c\/p\u003e\u003cp\u003eBuilt for installations exposed to sun, spray, and outdoor conditions, the SM10F4 uses weather-focused materials and an IPX5 water-resistance rating. Its UV-stable construction and water- and saltwater-resistant design support use in marine and recreational environments. This makes it a practical choice for speaker locations where conventional car speakers may not be appropriate.\u003c\/p\u003e\u003cp\u003eThe 10-inch coaxial format is intended to deliver substantial midbass presence along with clear upper-frequency output from the 1-inch titanium dome tweeter. Cerwin-Vega rates each speaker for 200 watts RMS and 400 watts maximum power handling. With 95 dB sensitivity, the system is designed for strong output when matched with suitable amplification.\u003c\/p\u003e\u003cp\u003eThe SM10F4 incorporates a ferrite motor structure, maximum Xmax suspension design, and an internal crossover. These elements support controlled driver movement while directing the appropriate frequency range to the woofer and tweeter. The flush-mount layout provides a clean, integrated appearance on a panel, bulkhead, or other properly supported mounting surface.\u003c\/p\u003e\u003cp\u003eIntegrated multi-color RGB LED lighting adds visual customization to a marine or powersports system. The speakers are supplied with grilles and are commonly specified as a pair, while power ratings are stated per speaker. They can serve as a high-output main-speaker upgrade in a system with a compatible source unit, amplifier, wiring, and optional RGB lighting control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines bass-capable woofer output and tweeter detail in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Titanium Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction for clearer vocals and instruments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Per Speaker:\u003c\/strong\u003e Supports use with appropriately matched marine amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Water Resistance:\u003c\/strong\u003e Helps suit the speakers to wet outdoor and marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Routes frequencies between the woofer and tweeter within each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB Lighting:\u003c\/strong\u003e Adds multi-color illumination to complement a customized installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM10F4 uses a cast aluminum basket, ferrite ceramic magnet, treated-cloth surround, polypropylene cone, and titanium diaphragm. Its construction is specified as UV stable and water- and saltwater-resistant for outdoor use. A removable grille is included to finish and help protect the flush-mounted speaker installation.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting surface can accommodate the 8.78-inch cutout and 4.33-inch top-mount depth before cutting. Use marine-appropriate wiring and connectors, maintain correct speaker polarity, and match each 4-ohm speaker to an amplifier channel rated appropriately for its 200-watt RMS handling. For RGB control beyond fixed wiring options, use a compatible RGB lighting controller sold separately.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45616740237382,"sku":"CER-SM10F4","price":541.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618vGMB10DL.jpg?v=1784368840"},{"product_id":"cerwin-vega-sm65f4-6-5-2-way-marine-speakers","title":"Cerwin-Vega SM65F4 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM65F4 is a pair of 6.5-inch 2-way marine coaxial speakers designed for boats, motorcycles, and powersports applications. They provide a flush-mount audio upgrade where conventional interior speakers may not withstand moisture, sunlight, or outdoor exposure. The 4-ohm design suits systems using compatible marine or powersports amplifiers and source units.\u003c\/p\u003e\u003cp\u003eEach speaker combines a full-range woofer with a 25mm (1-inch) titanium dome tweeter. This 2-way arrangement is designed to cover midrange detail and high-frequency reproduction from a single mounting location. The Radial Zip Ring cone design is intended to support expanded high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe SM65F4 is rated for 125 watts RMS and 250 watts peak power handling per speaker. Its 92 dB sensitivity rating at 1W\/1m helps it produce useful output with appropriately matched amplification. A 4mm Xmax specification and Max Xmax suspension design support controlled cone travel.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the speaker uses a thermal-molded, UV-coated waterproof composite injection cone and a high-temperature injection-molded composite basket. Cerwin-Vega identifies the model as IP65 marine-grade compliant and 100% UV stable. These construction details are intended for installations exposed to water spray, dust, and sunlight.\u003c\/p\u003e\u003cp\u003eIntegrated digital RGB LED lighting adds illumination around the speaker for compatible marine and powersports builds. The speaker is a flush-mount model with a 5.63-inch mounting diameter and 2.56-inch mounting depth. It can be used as part of a full system with a compatible 4-ohm amplifier, source unit, wiring, and optional RGB lighting control equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines a woofer and titanium dome tweeter in one flush-mount speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25mm Titanium Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for higher-output marine and powersports systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine-Grade Compliance:\u003c\/strong\u003e Built for exposure to dust, water spray, and outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Coated Composite Cone:\u003c\/strong\u003e Helps the cone withstand prolonged outdoor and marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Digital RGB Lighting:\u003c\/strong\u003e Adds configurable lighting capability to compatible installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM65F4 uses a ferrite magnetic motor, treated-cloth surround, high-temperature injection-molded composite basket, and thermal-molded UV-coated waterproof composite injection cone. Its titanium diaphragm material and 1.75-inch voice coil are paired with an internal 2-way speaker design. A grille is listed as optional.\u003c\/p\u003e\u003cp\u003eConfirm the available cutout and rear clearance before installation: the specified mounting diameter is 5.63 inches and mounting depth is 2.56 inches. Use compatible 4-ohm amplification and follow the vehicle, boat, or fairing manufacturer's mounting guidance. RGB lighting requires appropriate compatible control and wiring; Cerwin-Vega lists its RPMDLED multi-function digital RGB LED remote control as available.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45616814030918,"sku":"CER-SM65","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61zJ-xvqkNL.jpg?v=1784368882"}],"url":"https:\/\/audiowatt.store\/collections\/coaxial-speakers.oembed?page=15","provider":"Audio Watt Store","version":"1.0","type":"link"}