{"title":"Cerwin Vega","description":null,"products":[{"product_id":"cerwin-vega-bkx212s-dual-12-sealed-bass-package","title":"Cerwin Vega BKX212S Dual 12\" Sealed Bass Package","description":"\u003cp\u003eThe Cerwin Vega BKX212S is a complete bass package built around a dual 12-inch loaded sealed enclosure and a matching XED3001D monoblock amplifier. It provides a straightforward way to add dedicated low-frequency output to a factory or aftermarket car audio system. The preloaded enclosure reduces the need to select separate subwoofers, box, and amplifier components.\u003c\/p\u003e\u003cp\u003eThis package is intended for drivers who want a compact, coordinated bass upgrade for a trunk or cargo-area installation. Its sealed enclosure design is suited to controlled, defined bass response rather than a ported-box presentation. The system has a 2-ohm nominal final impedance and is rated for 300 watts RMS total.\u003c\/p\u003e\u003cp\u003eTwo 12-inch XED Series subwoofers are installed in the enclosure, creating a larger cone area than a single-subwoofer solution. The enclosure uses MDF construction and a sloped profile to support practical vehicle placement. Polypropylene cones, vented motor structures, poly-cotton spiders, and stamped Vega basket frames are part of the listed subwoofer design.\u003c\/p\u003e\u003cp\u003eThe included XED3001D amplifier is a compact Class D mono amplifier rated at 300 watts RMS at 2 ohms. It provides low-level and high-level input sensitivity ranges, allowing integration with many aftermarket receivers and compatible factory-radio installations. Adjustable low-pass, subsonic, and bass-boost controls support system setup for the vehicle and music preferences.\u003c\/p\u003e\u003cp\u003eThe BKX212S can serve as the bass foundation of a broader vehicle audio upgrade while leaving the front and rear speakers powered separately. Its amplifier includes signal-sensing remote turn-on, LED power\/protect indication, and thermal, overload, and speaker-short protection. A 4 AWG amplifier wiring kit is recommended by the manufacturer for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 12-Inch XED Subwoofers:\u003c\/strong\u003e Provides a preloaded two-subwoofer bass solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Enclosure:\u003c\/strong\u003e Supports controlled bass response in a compact package.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS System:\u003c\/strong\u003e Matches the included amplifier's 2-ohm RMS output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXED3001D Mono Amplifier:\u003c\/strong\u003e Supplies dedicated Class D power for the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Helps integrate with compatible factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bass Controls:\u003c\/strong\u003e Lets installers tailor crossover, subsonic, and boost settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure is specified with 3\/4-inch MDF construction, dual 12-inch subwoofers, and a sealed acoustic-suspension design. Listed subwoofer construction includes polypropylene cones, vented motor structures, poly-cotton spiders with woven tinsel wires, Unimount gasket surrounds, and stamped Vega basket frames. The included XED3001D amplifier uses an aluminum chassis and compact 6.3 x 4.7 x 1.8-inch dimensions.\u003c\/p\u003e\u003cp\u003eInstall the enclosure securely in a trunk, hatch, or cargo area with clearance for the enclosure's 25.9 x 11.8 x 10-inch lower-depth profile and 5.7-inch top depth. The amplifier can accept low-level or high-level signal connections; configure the low-pass filter, subsonic filter, and gain during setup. Cerwin Vega recommends a 4 AWG amplifier wiring kit, and the installation should include appropriate fused battery power, ground, remote-turn-on or signal-sensing setup, and correctly polarized speaker wiring.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614274805830,"sku":"CER-BKX212S","price":498.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51XLx0EdvvL.jpg?v=1784364991"},{"product_id":"cerwin-vega-cv15bt-single-din-bluetooth-multimedia-receiver","title":"Cerwin Vega CV15BT Single DIN Bluetooth Multimedia Receiver","description":"\u003cp\u003eThe Cerwin Vega CV15BT is a Single DIN multimedia receiver for vehicles that need modern music playback, Bluetooth calling, and AM\/FM radio in a compact dashboard format. It is designed as a digital-media head unit with USB, SD card, and 3.5 mm auxiliary inputs. This makes it a practical replacement for an older factory radio or a basic source unit for a custom car-audio installation.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth 4.0 supports wireless audio streaming and hands-free phone calls through the receiver's integrated microphone. The unit uses the pairing name “CV15BT” when connecting a compatible mobile device. It supports A2DP for Bluetooth audio and AVRCP for compatible playback control.\u003c\/p\u003e\u003cp\u003eThe CV15BT provides 50 watts maximum output across each of its four channels and is specified for 4-ohm speakers. Preset EQ modes allow listeners to choose a sound setting that suits their music and system. For radio listening, the receiver includes an AM\/FM tuner with station presets.\u003c\/p\u003e\u003cp\u003eFor expanded systems, the receiver includes three pairs of 5V preamp outputs for front, rear, and subwoofer amplifier connections. This layout lets the unit serve as a control center for externally amplified speakers and a subwoofer. Its dedicated front, rear, and subwoofer outputs provide flexibility when planning a staged system upgrade.\u003c\/p\u003e\u003cp\u003eThe front panel combines a digital LED-backlit display with USB, SD card, and AUX access for straightforward daily use. It plays MP3 and WMA files from USB or SD media, but it does not play video files or display images. A wireless remote control is included for additional operation convenience.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle DIN Chassis:\u003c\/strong\u003e Fits a standard Single DIN dashboard opening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 4.0:\u003c\/strong\u003e Streams audio and supports hands-free calling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Microphone:\u003c\/strong\u003e Enables phone conversations through the receiver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5V Preamp Outputs:\u003c\/strong\u003e Supports external front, rear, and subwoofer amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB, SD, and AUX:\u003c\/strong\u003e Provides several wired music-source options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAM\/FM Tuner:\u003c\/strong\u003e Keeps local radio listening available in the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CV15BT uses a compact Single DIN chassis with a digital LED-backlit display, front-panel media connections, a rotary control, preset buttons, and an SD card slot. Its front panel also includes a dedicated USB charging connection. The receiver includes a wireless remote control, while its standard dashboard-oriented layout keeps commonly used controls accessible from the front of the unit.\u003c\/p\u003e\u003cp\u003eInstallation uses the receiver's ISO speaker and power connections, with front, rear, and subwoofer RCA preamp outputs available for amplifier wiring. The manufacturer specifies a 12V DC vehicle electrical system, a maximum current draw of 10A, and a mounting angle below 30 degrees. Confirm vehicle-specific dash fitment, antenna adaptation, harness compatibility, and any needed installation hardware before purchase.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614276771910,"sku":"CER-CV15BT","price":82.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51jDw3_E1JL.jpg?v=1784365035"},{"product_id":"cerwin-vega-cvm0-digital-bass-enhancer","title":"Cerwin-Vega CVM0 Digital Bass Enhancer","description":"\u003cp\u003eThe Cerwin-Vega CVM0 is a car-audio bass processor designed to restore and shape low-frequency content before it reaches downstream audio components. It is intended for systems that need more control over sub-bass impact than a head unit or amplifier gain control alone can provide. The CVM0 connects at line level and is designed to work with compatible crossovers, equalizers, and amplifiers.\u003c\/p\u003e\u003cp\u003eIts Bass Driver circuit recreates and injects low-frequency information into the signal path, while the bass equalization circuit contours the processed bass response. Sweep and Width controls let the installer select the bass center frequency and the range of frequencies affected. This makes the processor suited to tuning bass response around the vehicle, speaker placement, and enclosure characteristics.\u003c\/p\u003e\u003cp\u003eThe CVM0 uses balanced-input circuitry to help minimize induced noise and accepts signals up to 15V RMS. Its RCA outputs feed the next component in the signal chain, such as an equalizer, crossover, or amplifier. Cerwin-Vega specifies installing the CVM0 before a crossover in the system layout.\u003c\/p\u003e\u003cp\u003eA dash-mount remote control is included for adjusting bass level from the driver's seat. The remote has an LED that brightens as bass is increased, while three LEDs on the processor indicate bass-maximizer activity. These controls support practical adjustment for different recordings without needing to access the main chassis.\u003c\/p\u003e\u003cp\u003eThe built-in PFM subsonic filter offers selectable 35Hz, 50Hz, and 80Hz settings for tailoring very-low-frequency filtering. Bass-output jumpers provide four output-setting options, allowing the processor to be configured around the rest of the system. It is a focused upgrade for car-audio systems using RCA-level source and amplifier connections.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Restores and injects low-frequency information into the audio signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Equalization:\u003c\/strong\u003e Shapes processed bass to better suit the installed speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep And Width Controls:\u003c\/strong\u003e Adjust the bass center frequency and affected frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Selectable 35Hz, 50Hz, or 80Hz filtering supports system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Lets the driver adjust bass level from the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Help minimize induced noise while accepting high-level preamp signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM0 is a compact processor chassis with front-panel Sweep and Width controls, bass-maximizer LEDs, a power-on LED, RCA signal connections, and a three-terminal power connector. Its rear-panel configuration includes input-grounding, ground-isolation, and bass-output-control jumpers. The included wired dash remote provides a separate bass-level knob and LED indication.\u003c\/p\u003e\u003cp\u003eInstall the CVM0 in an accessible, secure location and connect it using RCA-level signal cables. Connect its RCA outputs to the next component after the processor; Cerwin-Vega specifies placing the unit before a crossover. Wire B+ to a 12V source, connect the remote lead to a 12V DC turn-on lead, ground the unit to the vehicle chassis, and use the recommended 1A fuse rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614280114246,"sku":"CER-CVM0","price":98.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/519zpD3-VuL.jpg?v=1784365097"},{"product_id":"cerwin-vega-cvm1-digital-bass-enhancer","title":"Cerwin-Vega CVM1 Digital Bass Enhancer","description":"\u003cp\u003eThe Cerwin-Vega CVM1 is a digital bass enhancement processor for car audio systems using RCA-level signal connections. It is designed to restore and contour low-frequency information before the signal reaches downstream audio components. This makes it a useful addition when a system needs more adjustable bass response than a head unit or amplifier alone provides.\u003c\/p\u003e\u003cp\u003eThe CVM1 is intended for enthusiasts building or refining a subwoofer-equipped system with compatible RCA signal paths. Its balanced input circuit accepts signals up to 15V RMS, helping it work with higher-voltage aftermarket preamp outputs. The processor is installed inline ahead of a crossover, equalizer, or amplifier.\u003c\/p\u003e\u003cp\u003eIts bass controls allow the user to choose the center frequency most affected by the restoration circuit, then adjust the width of the affected frequency range. The Sweep control operates from 27Hz to 63Hz, allowing tuning around the vehicle, enclosure, and subwoofer system. A separate bass output control provides selectable output settings to help match the processor to connected equipment.\u003c\/p\u003e\u003cp\u003eThe CVM1 includes a dash-mount remote control for convenient adjustment from the driver seat. The remote combines bass-level adjustment with variable PFM subsonic filtering from 35Hz to 80Hz. This gives the user a practical way to reduce unwanted ultra-low-frequency content while tailoring bass level for different recordings.\u003c\/p\u003e\u003cp\u003eThree Bass Maximizer LEDs provide visual indication when the bass-maximization circuit is active, while a separate power LED confirms operation. With RCA input and output connections, the CVM1 fits into systems using an aftermarket source unit, equalizer, crossover, or amplifier with compatible line-level connections. Careful setup is important, since bass restoration can increase low-frequency demand on amplifiers, subwoofers, and enclosures.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Enhancement:\u003c\/strong\u003e Restores and shapes low-frequency information in the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15V RMS Input Capability:\u003c\/strong\u003e Accommodates higher-voltage RCA preamp signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Sweep Control:\u003c\/strong\u003e Selects a bass center frequency from 27Hz to 63Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth Control:\u003c\/strong\u003e Adjusts the range affected around the selected frequency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides driver-seat bass and subsonic-filter adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Subsonic Filter:\u003c\/strong\u003e Variable 35Hz to 80Hz filtering helps manage ultra-low frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM1 uses a compact processor chassis with panel-mounted Sweep and Wide controls, RCA input and output connections, a remote-control port, and a screw-terminal power connector. Its design also includes three Bass Maximizer indicator LEDs, a power-on LED, and internal jumpers for input grounding, ground isolation, and bass-output selection. Cerwin-Vega does not publish a chassis material specification for this model.\u003c\/p\u003e\u003cp\u003eInstall the CVM1 in an accessible, securely mounted location and connect it inline before a crossover, equalizer, or amplifier. Connect B+ to a 12V power source, remote turn-on to a 12V DC activation lead, and ground to the vehicle chassis. Start with the factory bass-output jumper setting, then set output level and subsonic filtering conservatively to suit the amplifier, subwoofer size, enclosure, and listening level.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614284013638,"sku":"CER-CVM1","price":120.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51zYHvQvr5L.jpg?v=1784365166"},{"product_id":"cerwin-vega-cvm2-digital-bass-restoration-processor","title":"Cerwin-Vega CVM2 Digital Bass Restoration Processor","description":"\u003cp\u003eThe Cerwin-Vega CVM2 is a mobile bass restoration processor designed for car audio systems with RCA preamp signal paths. It processes low-frequency content before the signal reaches the next component in the system, such as an amplifier, equalizer, or crossover. This makes it a focused upgrade for listeners who want more control over bass response than a head unit alone provides.\u003c\/p\u003e\u003cp\u003eThe CVM2 uses a Bass Driver circuit to restore and reinforce low-frequency information in the audio signal. Its bass equalization circuit is intended to contour the processed bass response for the connected speaker system. The result is a tunable low-frequency presentation that can be adjusted for the vehicle, music source, subwoofer system, and listening preference.\u003c\/p\u003e\u003cp\u003eThree front-panel controls provide access to Master Volume, Wide, and Sweep adjustments. Sweep selects the center frequency affected by bass restoration from 27 to 63 Hz, while Wide changes the range around that selected frequency. This allows the processor to be tuned around the bass character of a specific vehicle and subwoofer installation.\u003c\/p\u003e\u003cp\u003eA wired, mountable remote location controller lets the driver adjust bass level from the listening position. The remote includes an LED indicator that brightens as bass level is increased and dims as it is reduced. It also provides adjustment of the subsonic control, helping tailor low-frequency filtering without accessing the main processor.\u003c\/p\u003e\u003cp\u003eThe CVM2 fits into an RCA-based signal chain ahead of a crossover, equalizer, or amplifier. It supports two-channel preamp inputs and outputs, along with high-level signal capability for compatible source units and amplifiers. Its selectable bass-output settings also provide recommendations based on amplifier input-voltage capability and minimum speaker size.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Rebuilds and reinforces low-frequency information in the signal path.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel RCA Signal Path:\u003c\/strong\u003e Provides stereo preamp inputs and outputs for system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePara-Bass Controls:\u003c\/strong\u003e Sweep and Wide controls tailor bass center frequency and range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Dash Remote:\u003c\/strong\u003e Places bass-level adjustment within reach of the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic Filter Control:\u003c\/strong\u003e Adjusts low-frequency filtering to suit the system setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Helps minimize induced noise in the input signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM2 uses a compact processor enclosure with front-panel rotary controls, RCA signal connections, a remote-control socket, and dedicated power terminals. A power-on LED provides operating-status indication, while the separate remote controller combines bass-level and subsonic adjustments. Cerwin-Vega does not publish enclosure-material details.\u003c\/p\u003e\u003cp\u003eInstall the CVM2 in-line between an RCA-equipped source unit and the next signal-processing component or amplifier, ahead of a crossover when one is used. Power connections require 12V B+, chassis ground, and a switched 12V remote turn-on lead. Start with the factory bass-output setting, then set the Sweep, Wide, bass level, and subsonic control conservatively while matching the processor to the amplifier and speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614287650886,"sku":"CER-CVM2","price":142.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/519Za3BLAXL.jpg?v=1784365217"},{"product_id":"cerwin-vega-cvm3-2-channel-bass-maximizer-processor","title":"Cerwin-Vega CVM3 2-Channel Bass Maximizer Processor","description":"\u003cp\u003eThe Cerwin-Vega CVM3 is a 2-channel bass maximizer processor designed to shape and restore low-frequency information before it reaches the next component in a car audio system. It is intended for systems that need more control over bass response than a source unit or amplifier adjustment alone can provide. RCA inputs and outputs allow it to be installed in the signal path ahead of an amplifier, equalizer, or crossover.\u003c\/p\u003e\u003cp\u003eIts bass driver circuit recreates low-frequency content and adds it back into the signal path, while the bass equalization circuit contours the restored bass for the connected speaker system. A Sweep control selects the center frequency affected by the restoration circuit, and a Wide control adjusts the range of frequencies it influences. This makes the CVM3 suitable for tailoring bass character to the vehicle, music, subwoofer system, and enclosure.\u003c\/p\u003e\u003cp\u003eThe CVM3 supports signals up to 15V RMS at its balanced differential RCA inputs and provides up to 13.2V peak output. Its high-headroom PWM power supply, 133 dB signal-to-noise ratio, and 0.0025% THD specification support clean signal handling within a properly configured system. The processor is designed for use with a full-range source signal.\u003c\/p\u003e\u003cp\u003eA wired dash-mount remote controller brings bass adjustment closer to the driver. Its LED indicator becomes brighter as bass effect is increased and dimmer as it is reduced. The processor also includes master volume, sub volume, bass output, Sweep, Wide, and adjustable subsonic controls for system-specific setup.\u003c\/p\u003e\u003cp\u003eFor subwoofer upgrades, the CVM3 fits between an RCA-equipped source or signal chain and the downstream crossover, equalizer, or amplifier. The manual specifies placing it before any crossover because it needs a full-range signal to operate properly. It can be a useful addition when building a dedicated bass section around a compatible amplifier and subwoofer system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel RCA Signal Path:\u003c\/strong\u003e Uses RCA preamp inputs and outputs for in-line system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Recreates and injects low-frequency information into the audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep And Wide Controls:\u003c\/strong\u003e Adjust bass restoration center frequency and affected frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Subsonic Control:\u003c\/strong\u003e Sets the subsonic frequency from 35 Hz to 120 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides in-car bass adjustment with an LED level indicator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Differential Inputs:\u003c\/strong\u003e Help minimize induced noise in the RCA signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM3 uses a compact processor layout with RCA signal connections, a power connector, onboard bass controls, and a separate wired dash-mount remote controller. Cerwin-Vega does not publish a chassis-material specification. Its design includes balanced differential RCA inputs, a high-headroom PWM power supply, and selectable internal output and isolation settings for qualified installers.\u003c\/p\u003e\u003cp\u003eConnect the RCA outputs to the next component after the processor, such as an amplifier, equalizer, or crossover, and feed the CVM3 a full-range signal. Power wiring requires 12V B+, chassis ground, and a 12V remote turn-on lead; the manual advises placing the processor before any device with a crossover. Set the processor conservatively at first, then match its output setting and controls to the amplifier input voltage and connected subwoofer system.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614305968198,"sku":"CER-CVM3","price":163.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81di5WCb7uL.jpg?v=1784365552"},{"product_id":"cerwin-vega-cvp10s4-10-4-ohm-subwoofer","title":"Cerwin-Vega CVP10S4 10\" 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP10S4 is a 10-inch passive car subwoofer designed to add dedicated low-frequency output to an aftermarket vehicle audio system. Its single 4-ohm voice coil provides a straightforward load for a compatible amplifier. It is intended for drivers who want to build or refresh a bass system with a separate subwoofer and enclosure.\u003c\/p\u003e\u003cp\u003eWith 150 watts RMS and 450 watts maximum power handling, the CVP10S4 is suited to amplifier matching based on continuous power rather than peak ratings. Its 87.1 dB sensitivity and 8 mm one-way Xmax support responsive bass performance within its operating limits. The 10-inch format can be a practical option where enclosure space is more limited than a larger subwoofer installation.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and treated foam surround form the moving assembly. The surround uses a dual-stitched connection and ribbed design intended to support cone movement. A structure-reinforcing dust cap is also used as part of the driver assembly.\u003c\/p\u003e\u003cp\u003eThe CVP10S4 uses a ferrite magnet motor, stamped-steel basket, and perimeter-vented voice-coil design. Its bumped backplate is engineered to allow increased excursion, while the venting supports heat dissipation. Large-gauge spring terminals simplify connection of speaker wire during installation.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in sealed or ported enclosures, allowing the system design to be tailored to available space and listening goals. A sealed enclosure is commonly selected for a more compact installation, while a ported enclosure changes the system's output character. Confirm enclosure dimensions, amplifier capability, and vehicle clearances before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass without requiring a larger driver format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides simple amplifier and wiring compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports appropriate continuous-power amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a light, rigid cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter Voice-Coil Venting:\u003c\/strong\u003e Helps dissipate heat during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a stable mounting structure for the driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP10S4 combines a polypropylene cone, treated foam surround, ferrite magnet, and CAD-optimized stamped-steel basket. Its dual-stitched, ribbed surround and structure-reinforcing dust cap are part of the driver design. The subwoofer uses large-gauge spring terminals for speaker-wire connections.\u003c\/p\u003e\u003cp\u003ePlan for a 236 mm mounting diameter, 253 mm hole diameter, and 134 mm mounting depth when designing the enclosure and checking vehicle clearance. Pair the subwoofer with an external amplifier compatible with a 4-ohm single-voice-coil load and size the amplifier around its 150-watt RMS rating. Use it in a properly designed sealed or ported enclosure; an enclosure and amplifier are required for operation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614308196422,"sku":"CER-CVP10S4","price":86.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JBvsL4JxL.jpg?v=1784365601"},{"product_id":"cerwin-vega-cvp12d4-12-dual-4-ohm-subwoofer","title":"Cerwin-Vega CVP12D4 12\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP12D4 is a 12-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. Its dual 4-ohm voice-coil configuration gives installers flexible wiring options for matching compatible amplifiers. It is intended for vehicles using a properly designed subwoofer enclosure and external amplification.\u003c\/p\u003e\u003cp\u003eThis subwoofer is a practical choice for listeners who want stronger bass impact than factory full-range speakers can provide. Its 200-watt RMS power rating helps guide amplifier matching for sustained use. The dual-voice-coil layout can be wired for a 2-ohm or 8-ohm final load when using one subwoofer.\u003c\/p\u003e\u003cp\u003eThe CVP12D4 uses a light, rigid polypropylene cone and a structure-reinforcing dust cap to support controlled cone movement. Its treated foam surround is dual stitched at the cone connection and ribbed to help maintain its shape under high-output use. Together, these components support deep bass reproduction in a conventional car-audio subwoofer installation.\u003c\/p\u003e\u003cp\u003eFor thermal management, the design uses perimeter-vented voice coils to promote cooling during operation. A bumped backplate provides additional clearance for cone excursion, while the CAD-optimized stamped-steel basket provides a stable mounting structure. The result is a purpose-built driver with features focused on durability, cooling, and excursion control.\u003c\/p\u003e\u003cp\u003eThe CVP12D4 can be used in either sealed or ported enclosure systems, depending on the installation goals and enclosure design. A sealed enclosure is commonly selected for a more compact installation, while a ported enclosure can be used when designed for the driver and vehicle. Pair it with a compatible mono or bridged amplifier whose stable load capability matches the chosen voice-coil wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated low-frequency capability to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports 2-ohm or 8-ohm wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Power Handling:\u003c\/strong\u003e Helps match the subwoofer with an appropriately rated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a light, rigid diaphragm for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter Voice-Coil Venting:\u003c\/strong\u003e Promotes cooling for sustained operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBumped Backplate:\u003c\/strong\u003e Provides clearance for increased cone excursion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP12D4 is built around a stamped-steel basket, ferrite magnet structure, polypropylene cone, and treated foam surround. A dual-stitched, ribbed surround, reinforced dust cap, vented voice-coil arrangement, and bumped backplate are incorporated into the driver design. Large-gauge spring terminals simplify connection of suitable speaker wire.\u003c\/p\u003e\u003cp\u003eConfirm the enclosure opening, mounting depth, and available clearance before installation; the listed cutout diameter is 301 mm and mounting depth is 151 mm. Wire both voice coils correctly and ensure the amplifier is stable at the final 2-ohm or 8-ohm load. The subwoofer, enclosure, amplifier, wiring, and installation hardware should be selected separately as needed for the vehicle.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614309605446,"sku":"CER-CVP12D4","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ht2GpUokL.jpg?v=1784365641"},{"product_id":"cerwin-vega-cvp12s4-12-4-ohm-svc-subwoofer","title":"Cerwin-Vega CVP12S4 12\" 4-Ohm SVC Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP12S4 is a 12-inch passive car subwoofer designed to add low-frequency output to a factory-system upgrade or custom audio build. Its single 4-ohm voice coil provides a straightforward load for matching with a compatible external amplifier. It is intended for listeners who want a dedicated bass driver without moving to a dual-voice-coil wiring configuration.\u003c\/p\u003e\u003cp\u003eRated at 200 watts RMS and 550 watts maximum, the CVP12S4 is built for systems that need controlled low-end reinforcement. Its 86.8 dB sensitivity and 28.4 Hz resonant frequency support bass-focused enclosure designs. The 8 mm one-way Xmax specification indicates capacity for substantial cone travel within its rated operating range.\u003c\/p\u003e\u003cp\u003eA light, rigid poly cone handles bass reproduction while a treated foam surround supports cone movement. The surround is dual stitched to the cone and uses a ribbed profile intended to help it retain its shape under higher output. A reinforcing dust cap is used as part of the driver structure.\u003c\/p\u003e\u003cp\u003eThe motor and frame design focus on cooling and stability. Perimeter venting at the voice coil is specified to assist heat dissipation, while a bumped backplate supports increased excursion. The driver is built on a CAD-optimized stamped-steel basket.\u003c\/p\u003e\u003cp\u003eThe CVP12S4 can be used in either sealed or ported enclosures, allowing a system to be tailored for more controlled bass or greater low-frequency output. Its 4-ohm single-coil layout makes amplifier selection and wiring relatively direct. Use the published mounting dimensions when choosing an enclosure, baffle, and installation location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Subwoofer:\u003c\/strong\u003e Adds a dedicated low-frequency driver to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a simple nominal impedance load for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Rating:\u003c\/strong\u003e Supports continuous-power amplifier matching at its rated level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoly Cone:\u003c\/strong\u003e Combines low mass and rigidity for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Foam Surround:\u003c\/strong\u003e Supports cone travel and is dual stitched for attachment reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Motor Design:\u003c\/strong\u003e Perimeter voice-coil venting helps manage heat during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP12S4 uses a polypropylene cone, treated foam surround, reinforcing dust cap, and stamped-steel basket. Its ribbed, dual-stitched surround and bumped backplate are designed to support cone movement. Large-gauge spring terminals provide the speaker-wire connection points.\u003c\/p\u003e\u003cp\u003eMount the subwoofer in an enclosure designed for a 12-inch driver and follow the 301 mm cutout and 151 mm mounting-depth specifications. The manufacturer identifies the driver as compatible with sealed and ported enclosures; choose the enclosure type according to the system goal. Pair it with an external amplifier that is stable at a 4-ohm load and set amplifier gain conservatively.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614311342150,"sku":"CER-CVP12S4","price":99.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ht2GpUokL_5b114b6d-4b6e-4bc2-8bb9-93a7954d0a0e.jpg?v=1784365691"},{"product_id":"cerwin-vega-cvp1400-4-4-channel-class-d-car-amplifier","title":"Cerwin Vega CVP1400.4 4-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin Vega CVP1400.4 is a compact four-channel Class D car amplifier designed to add dedicated power to a factory or aftermarket audio system. It is suited to powering front and rear speakers, component sets, or two bridged speaker channels where a system calls for higher output. Its small chassis helps address installations where conventional amplifiers may be difficult to place.\u003c\/p\u003e\u003cp\u003eRated for 80 watts RMS per channel at 4 ohms and 140 watts RMS per channel at 2 ohms, the CVP1400.4 provides a practical power range for many car-audio speakers. It can also be bridged to deliver 290 watts RMS to each of two 4-ohm loads. This flexibility allows the amplifier to serve as a four-speaker amplifier or as part of a more focused two-channel system.\u003c\/p\u003e\u003cp\u003eClass D operation supports efficient power delivery in a compact enclosure. The amplifier uses a full MOSFET DC-DC PWM power supply, a double-sided two-layer circuit board, and surface-mount-device technology. Its frequency response extends from 10 Hz to 30 kHz, supporting full-range speaker applications.\u003c\/p\u003e\u003cp\u003eIntegration is supported through both low-level and high-level input capability. The high-level input includes auto turn-on operation for compatible 4V to 8V speaker-level signals, helping the amplifier work with many factory radios without requiring a separate line-output converter. Variable high-pass and low-pass filters allow each channel pair to be configured for the connected speakers.\u003c\/p\u003e\u003cp\u003eThe CVP1400.4 is a useful upgrade path for listeners who want more headroom and control than a radio's built-in amplifier can provide. It supports 2-ohm stereo loads and 4-ohm bridged loads, so speaker selection and wiring should be planned around those minimum impedances. Built-in protection provisions help safeguard the amplifier against short-circuit, low-impedance, reverse-polarity, and overheating conditions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers up to four speakers from a compact amplifier chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W x 4 RMS at 4 Ohms:\u003c\/strong\u003e Provides dedicated full-range power for compatible speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Stereo Operation:\u003c\/strong\u003e Delivers up to 140W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Supports 290W RMS x 2 into 4-ohm bridged loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs with Auto Turn-On:\u003c\/strong\u003e Helps integrate the amplifier with compatible factory radio outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable HPF and LPF:\u003c\/strong\u003e Lets you tailor frequency range to the speakers being used.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP1400.4 uses a compact 7.28-inch by 4.92-inch by 1.93-inch chassis. Its construction includes a full MOSFET DC-DC PWM power supply, double-sided two-layer PCB, and SMD technology. Power and protection indicators provide operating-status feedback, while the protection system addresses short circuit, low impedance, reverse polarity, and overheating conditions.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with adequate ventilation and access to the side-panel controls. Use 2-ohm-or-higher stereo speaker loads or 4-ohm-or-higher bridged loads, and configure the high-pass or low-pass filters to suit the speakers. The manual specifies a negative-ground 12V DC vehicle electrical system, recommends a minimum of 8 AWG power and ground wiring, and states that the terminals accept up to 4 AWG cable.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614312128582,"sku":"CER-CVP1400-4","price":196.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51Eu2usVBSL.jpg?v=1784365745"},{"product_id":"cerwin-vega-cer-cvp2-2-channel-digital-bass-enhancer","title":"Cerwin Vega CER-CVP2 2-Channel Digital Bass Enhancer","description":"\u003cp\u003eThe Cerwin Vega CER-CVP2 is a 2-channel line-output converter and digital bass enhancer for adding aftermarket amplification to a factory car-audio system. It accepts speaker-level signals from an OEM radio and provides RCA-level outputs for compatible amplifiers. This makes it useful when a factory head unit does not provide conventional preamp outputs.\u003c\/p\u003e\u003cp\u003eThe CVP2 is intended for listeners who want to retain their factory radio while adding an amplifier, subwoofer system, or expanded multi-amplifier setup. Its BaSS ReSet bass-compensation circuit is designed to address factory systems that reduce bass output as volume rises. The adjustable bass level and compensation controls allow the response to be tailored during setup.\u003c\/p\u003e\u003cp\u003eWith a maximum speaker-level input rating of 400 watts per channel at 4 ohms, the processor is built for integration with higher-powered factory speaker outputs. It supplies up to 9.5V RMS of preamp output, helping provide a strong signal to connected amplifiers. Separate bass and main RCA outputs support systems using a dedicated bass amplifier alongside a full-range amplifier.\u003c\/p\u003e\u003cp\u003eThe CER-CVP2 includes a dash-mounted level remote for convenient bass-level adjustment from the driver’s seat. The remote control range is specified from 0 dB to -19 dB. A selectable auto-on function and 12V trigger output simplify integration with many factory-radio installations.\u003c\/p\u003e\u003cp\u003eThis processor fits between the source unit and amplifier stage of a vehicle audio upgrade. It can be used with speaker-level input from the radio or with a pre-out signal connection, depending on the system layout. Proper gain setting and bass-compensation adjustment are important for balanced output and clean operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel Line Output Converter:\u003c\/strong\u003e Converts compatible speaker-level signals to RCA-level outputs for amplifier integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBaSS ReSet Compensation:\u003c\/strong\u003e Helps restore bass response reduced by some factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Speaker-Level Input:\u003c\/strong\u003e Accepts up to 400 watts per channel at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual RCA Output Sections:\u003c\/strong\u003e Provides separate fixed main and variable bass output pairs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash Level Remote:\u003c\/strong\u003e Lets the driver adjust bass level from 0 dB to -19 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Auto-On:\u003c\/strong\u003e Supports automatic turn-on integration with compatible OEM systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2 uses a compact external-processor layout with clearly separated speaker-input, power, remote, signal-controller, and RCA connection sections. Its control arrangement includes Bass Level, Main Level, and BaSS ReSet adjustments, plus dedicated bass and main output pairs. Cerwin Vega does not publish a chassis-material specification for this model.\u003c\/p\u003e\u003cp\u003eInstall the CVP2 between the radio signal source and aftermarket amplifier or amplifiers, using either speaker-level input or the applicable pre-out connection method. Connect fused 12V power, ground, remote wiring, and RCA outputs according to the system design; the manufacturer recommends a 1-amp fuse. Set amplifier gains and BaSS ReSet compensation after installation, and use the included dash remote for routine bass-level changes.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614312620102,"sku":"CER-CVP2","price":78.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51vHbudvb5L.jpg?v=1784365787"},{"product_id":"cerwin-vega-cvp2400-1-mono-class-d-car-amplifier","title":"Cerwin-Vega CVP2400.1 Mono Class-D Car Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP2400.1 is a compact mono Class-D car amplifier designed to power a dedicated subwoofer system. It provides a focused low-frequency amplification solution for vehicles where factory bass output is limited or an aftermarket subwoofer upgrade is planned. Its small chassis helps accommodate installations where available space is restricted.\u003c\/p\u003e\u003cp\u003eDesigned for bass applications, the CVP2400.1 delivers 370 watts RMS at 4 ohms, 660 watts RMS at 2 ohms, and 900 watts RMS at 1 ohm. The mono configuration concentrates its output into one subwoofer channel rather than powering a set of full-range speakers. This makes it suitable for matching with a properly wired subwoofer or subwoofer system that supports its impedance capability.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a Class-D design with a full MOSFET DC-DC PWM power supply. Its frequency response is specified from 10 Hz to 400 Hz, covering the low-frequency range commonly used in vehicle subwoofer systems. Adjustable subsonic and low-pass filtering helps tailor the amplifier's output to the enclosure, subwoofer, and listening preferences.\u003c\/p\u003e\u003cp\u003eFor integration flexibility, the CVP2400.1 includes RCA inputs and high-level inputs with automatic turn-on capability. This allows it to work with many aftermarket head units as well as factory audio systems that provide speaker-level signals. Input sensitivity is adjustable from 250 mV to 6 V for matching the source signal level.\u003c\/p\u003e\u003cp\u003eA supplied subwoofer level remote control gives the driver a convenient way to attenuate the established bass level from the cabin. Protection circuitry addresses short-circuit, low-impedance, reverse-polarity, and overheating conditions. The result is a compact amplifier intended for a practical subwoofer upgrade in cars, trucks, and SUVs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class-D Design:\u003c\/strong\u003e Focuses amplifier output on a dedicated subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Output:\u003c\/strong\u003e Supports properly wired mono loads from 1 to 8 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis:\u003c\/strong\u003e Fits more easily in limited under-seat or trunk space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Helps integrate with compatible factory speaker-level audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Filters:\u003c\/strong\u003e Provides subsonic and low-pass frequency control for bass tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Level Control:\u003c\/strong\u003e Lets the driver adjust the established subwoofer level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2400.1 uses a small 8.86-inch-long chassis with a double-sided, two-layer circuit board and surface-mount-device construction. Its Class-D platform and MOSFET DC-DC PWM power supply are engineered for compact vehicle-audio amplification. Power and protection status indication is provided on the amplifier.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a solid, ventilated surface with the controls accessible after mounting; avoid covering it with carpet or wiring. Use properly sized power, ground, remote-turn-on, signal, and speaker wiring, with an inline fuse near the vehicle battery as directed by the installation manual. A 4-ohm, 2-ohm, or 1-ohm subwoofer load should be selected only when its final wired impedance and power handling are appropriate for the corresponding amplifier rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614313177158,"sku":"CER-CVP2400-1","price":258.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51NEPgh8wLL.jpg?v=1784365840"},{"product_id":"cerwin-vega-cvp2400-4-4-channel-class-d-amplifier","title":"Cerwin-Vega CVP2400.4 4-Channel Class D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP2400.4 is a compact four-channel Class D car amplifier for adding dedicated power to an aftermarket or factory audio system. It is designed for drivers who want to run front and rear speakers, a component speaker system, or a bridged two-channel configuration from one small amplifier. Its compact chassis helps solve mounting-space limitations in cars, trucks, and SUVs.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the CVP2400.4 is rated for 120 watts RMS per channel, while its 2-ohm rating reaches 210 watts RMS per channel. This gives it the capacity to support speakers that need more power and control than a typical radio’s built-in amplifier can provide. When correctly set up, it can bring greater output capability and system headroom to a vehicle audio upgrade.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a Class D design with a full MOSFET DC-DC PWM power supply. Its 10 Hz to 30 kHz frequency response supports full-range speaker applications, and adjustable high-pass and low-pass filters help tailor the signal for the speakers being used. The four-channel layout can also be bridged to provide 410 watts RMS to each of two 4-ohm loads.\u003c\/p\u003e\u003cp\u003eHigh-level inputs with automatic turn-on support integration with many factory radios, while low-level signal sensitivity supports aftermarket source units. This flexibility can simplify upgrades where replacing the existing radio is not preferred. A power\/protection indicator provides a visible operating-status reference.\u003c\/p\u003e\u003cp\u003eThe CVP2400.4 is part of Cerwin-Vega's CVP Series and measures less than nine inches long. It is suited to powering door speakers, component systems, or selected bridged speaker and subwoofer applications within its rated impedance limits. Built-in protection features are intended to help safeguard the amplifier during short-circuit, low-impedance, reverse-polarity, and overheating conditions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers up to four speakers from one compact amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W x 4 RMS at 4 Ohms:\u003c\/strong\u003e Provides dedicated power for compatible full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Delivers up to 210W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channels:\u003c\/strong\u003e Supports 410W RMS x 2 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Helps integrate the amplifier with compatible factory radios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Lets you set high-pass or low-pass filtering for the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2400.4 uses a small chassis measuring 8.86 by 4.92 by 1.93 inches. Its construction includes a full MOSFET DC-DC PWM power supply, double-sided two-layer circuit board, and surface-mount-device technology. Protection circuitry covers short circuits, low impedance, reverse polarity, and overheating.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry location with ventilation and access to its side-panel controls. It requires a negative-ground 12V DC vehicle electrical system; use appropriate fused power wiring, with the manufacturer documentation recommending a 4 AWG amplifier wiring kit. Maintain at least 2 ohms per channel in stereo operation or 4 ohms when bridged, and set crossover and gain controls to match the connected speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614313570374,"sku":"CER-CVP2400-4","price":238.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61qbTGOO_aL.jpg?v=1784365884"},{"product_id":"cerwin-vega-cvp2700-5-5-channel-class-d-amplifier","title":"Cerwin-Vega CVP2700.5 5-Channel Class D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP2700.5 is a compact five-channel Class D car amplifier designed to power four full-range speakers and a subwoofer from one chassis. It is suited to vehicle audio upgrades where installation space is limited but a single amplifier is needed for a complete speaker-and-subwoofer system. Its five-channel layout helps simplify system planning compared with using separate multi-channel and mono amplifiers.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the CVP2700.5 is rated for 80 watts RMS to each of four main channels plus 220 watts RMS to its subwoofer channel. At 2 ohms, it is rated for 130 watts RMS to each main channel and 400 watts RMS to the subwoofer channel. This output structure supports a balanced system with dedicated power for cabin speakers and low-frequency reinforcement.\u003c\/p\u003e\u003cp\u003eHigh-level inputs with 4V to 8V auto turn-on capability support integration with compatible factory or aftermarket radios. Low-level input sensitivity is rated from 250 mV to 6V for RCA-based installations. This flexibility makes the amplifier useful for upgrades that retain an existing source unit while adding amplified speakers and a subwoofer.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a full MOSFET DC-DC PWM power supply and Class D architecture for compact, efficient power delivery. Its signal controls include adjustable high-pass filtering from 10Hz to 250Hz, adjustable low-pass filtering from 52Hz to 400Hz, and bass boost up to 12dB. These controls allow the installer to divide frequencies between speakers and the subwoofer according to the system design.\u003c\/p\u003e\u003cp\u003eProtection circuitry addresses short circuits, low-impedance conditions, reverse polarity, and overheating. A power\/protection indicator provides operating-status feedback, and a wired subwoofer level remote is included for convenient bass-level adjustment. With its 9.65-inch-long small chassis, the CVP2700.5 can fit locations where a larger conventional amplifier may be difficult to mount.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Configuration:\u003c\/strong\u003e Powers four main speakers plus one subwoofer channel from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Architecture:\u003c\/strong\u003e Delivers efficient amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Auto Turn-On:\u003c\/strong\u003e Supports compatible speaker-level signals from 4V to 8V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Helps direct appropriate frequencies to speakers and subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Allows convenient adjustment of subwoofer output level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Protection:\u003c\/strong\u003e Helps guard against thermal, short-circuit, polarity, and impedance faults.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP2700.5 uses a double-sided, two-layer PCB with SMD technology and a full MOSFET DC-DC PWM power supply. Its compact enclosure measures 9.65 by 4.92 by 1.93 inches, allowing placement in many space-conscious vehicle installations. Status LEDs indicate normal operation or a protection condition.\u003c\/p\u003e\u003cp\u003eInstall the amplifier with secure power, ground, remote-turn-on, signal, and speaker connections, following vehicle-safe wiring practices. Use RCA inputs with an aftermarket radio or the high-level input interface with a compatible factory-radio signal, then set gain and crossover controls for the connected speakers and subwoofer. The included wired subwoofer level remote can be mounted within reach of the driver for on-the-go bass adjustment.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614313930822,"sku":"CER-CVP2700-5","price":320.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51gY3mTJeGL.jpg?v=1784365923"},{"product_id":"cerwin-vega-cvp3600-1-mono-class-d-amplifier","title":"Cerwin-Vega CVP3600.1 Mono Class-D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP3600.1 is a compact mono Class-D amplifier designed to power a subwoofer system in a car, truck, or SUV. It provides a focused low-frequency amplifier channel for installations that need dedicated bass power without using a large amplifier footprint. The amplifier is rated for 500 watts RMS at 4 ohms, 900 watts RMS at 2 ohms, and 1,300 watts RMS at 1 ohm.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners building or upgrading a subwoofer section while retaining either a factory or aftermarket radio. Its high-level inputs support connection from speaker-level outputs, helping simplify integration when RCA preamp outputs are unavailable. Auto turn-on capability is specified for 4V to 8V high-level input signals.\u003c\/p\u003e\u003cp\u003eThe CVP3600.1 is a mono amplifier with a 10 Hz to 400 Hz frequency response, making it intended for bass and sub-bass reproduction rather than full-range speakers. A variable subsonic filter and low-pass filter allow the amplifier to be tailored to the subwoofer and enclosure being used. A 12 dB bass boost control is also provided for system adjustment.\u003c\/p\u003e\u003cp\u003eIts power section uses a full MOSFET DC-DC PWM power supply, while the internal construction uses a double-sided, 2-layer PCB with surface-mount-device technology. Cerwin-Vega specifies protection for short circuits, low impedance, reverse polarity, and overheating. A power protection indicator helps show the amplifier's operating status.\u003c\/p\u003e\u003cp\u003eAt 9.65 inches long, the small chassis is practical for installations where mounting room is limited. The included subwoofer level remote gives the driver convenient control of bass level from the cabin. It is a dedicated amplifier choice for properly matched subwoofer systems wired down to a 1-ohm load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class-D Design:\u003c\/strong\u003e Delivers dedicated power for a subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Output:\u003c\/strong\u003e Supports correctly wired low-impedance subwoofer loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Connects with compatible factory or aftermarket radios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto Turn-On:\u003c\/strong\u003e Activates from 4V to 8V high-level signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Filters:\u003c\/strong\u003e Adjusts subsonic and low-pass frequency settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Remote:\u003c\/strong\u003e Provides convenient in-cabin subwoofer level adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP3600.1 uses a compact chassis measuring 9.65 x 4.92 x 1.93 inches. Its construction includes a double-sided, 2-layer circuit board and SMD technology, with a MOSFET-based DC-DC PWM power supply. Integrated protection circuitry is specified for short circuit, low impedance, reverse polarity, and overheating conditions.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with ventilation around the chassis and keep its controls accessible for setup. Use the variable subsonic and low-pass filters to suit the subwoofer enclosure and system tuning, and wire the connected subwoofer load no lower than the amplifier's 1-ohm stability rating. The amplifier uses four 35A fuses and is intended for negative-ground 12V vehicle electrical systems.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614314356806,"sku":"CER-CVP3600-1","price":328.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61SoMMvh-1L.jpg?v=1784365971"},{"product_id":"cerwin-vega-cvp69-6x9-4-ohm-full-range-speaker","title":"Cerwin-Vega CVP69 6x9\" 4-Ohm Full-Range Speaker","description":"\u003cp\u003eThe Cerwin-Vega CVP69 is a single 6x9-inch PRO Series full-range car speaker designed for vehicle audio systems that need higher output capability than typical factory speakers. Its 4-ohm impedance makes it suitable for common car-audio amplifier channels and compatible system designs. It is intended for custom installations in cars, trucks, SUVs, vans, motorcycles, and other vehicle-based audio applications.\u003c\/p\u003e\u003cp\u003eWith a 150-watt RMS and 300-watt maximum power rating, the CVP69 is built for systems that prioritize strong output and controlled midrange presence. Its 94 dB sensitivity rating helps it produce substantial output from available amplifier power. The published 50 Hz to 20 kHz frequency-response range supports broad-band reproduction from a single pro-style driver.\u003c\/p\u003e\u003cp\u003eThe CVP69 uses a treated paper cone and treated cloth surround to provide a durable moving assembly for high-output use. A 1.5-inch high-temperature, single-layer voice coil supports its stated power handling. Its ferrite motor uses a high-density, high B\/L design intended to maintain driver control under demanding playback conditions.\u003c\/p\u003e\u003cp\u003eA heavy-duty stamped-steel basket provides a rigid mounting platform for the speaker assembly. The driver has a 20-ounce ferrite magnet structure and a 4.53-inch magnet diameter. This construction makes it a practical choice for installations where a pro-driver format and physical durability are priorities.\u003c\/p\u003e\u003cp\u003eThe CVP69 is sold individually, allowing installers to build a matched pair or larger multi-speaker layout as needed. It can be used as part of a high-output system with compatible amplification and optional dedicated tweeters or subwoofers. Verify the vehicle's mounting opening, mounting depth, wiring, and available power before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplifier-powered systems designed around substantial continuous output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch PRO Driver:\u003c\/strong\u003e Fits applications designed for an oval 6x9-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides a lightweight cone material for responsive sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a durable structural base for secure mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP69 combines a treated paper cone, treated cloth surround, ferrite magnet, high-temperature voice coil, and stamped-steel basket. Its pro-driver construction is focused on output capability and mechanical durability. The speaker uses a single 4-ohm voice coil and does not include a grille.\u003c\/p\u003e\u003cp\u003eAllow for an 8.74 x 5.98-inch mounting cutout and 3.07 inches of mounting depth behind the mounting surface. Confirm that the vehicle panel has sufficient clearance for the 9.29 x 6.46-inch overall frame and 3.17-inch total depth. For best results, use secure mounting hardware, correct-polarity speaker wiring, and an amplifier channel matched appropriately to the speaker's 4-ohm load and 150-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614314848326,"sku":"CER-CVP69","price":56.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61uyNrKUwIL.jpg?v=1784366022"},{"product_id":"cerwin-vega-cvp700-2-2-channel-class-d-car-amplifier","title":"Cerwin-Vega CVP700.2 2-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP700.2 is a compact 2-channel Class D car amplifier for adding dedicated power to an aftermarket or factory-based audio system. It is designed for installations where space is limited but additional speaker or subwoofer amplification is needed. Its small chassis can be placed in locations such as under a seat or behind an interior panel when properly mounted and ventilated.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to drivers upgrading front speakers, rear speakers, or a single bridged subwoofer channel. It delivers 80 watts RMS per channel at 4 ohms, 160 watts RMS per channel at 2 ohms, or 310 watts RMS bridged at 4 ohms. These output options allow it to support a range of two-speaker and single-subwoofer system layouts.\u003c\/p\u003e\u003cp\u003eThe CVP700.2 uses a Class D amplifier platform with a full MOSFET DC-DC PWM power supply. Its rated frequency response spans 10 Hz to 30 kHz, supporting full-range speaker applications as well as filtered subwoofer duty. Adjustable high-pass and low-pass filters help tailor the amplifier output to the speakers being powered.\u003c\/p\u003e\u003cp\u003eHigh-level inputs with automatic turn-on support integration with compatible factory radios, while RCA inputs support aftermarket source units. The gain control provides a 0.25V to 6V input-sensitivity range for matching the amplifier to the source signal. A selectable HPF, LPF, or flat crossover mode helps adapt the channels to component speakers, coaxial speakers, or a bridged subwoofer.\u003c\/p\u003e\u003cp\u003eProtection features include short-circuit, low-impedance, reverse-polarity, and overheating protection. Power and protection status indication helps identify normal operation or a protection condition. For a complete upgrade, pair the CVP700.2 with speakers or a bridged 4-ohm subwoofer whose RMS handling and impedance are appropriate for its rated output.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Powers a pair of speakers or one bridged 4-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis:\u003c\/strong\u003e Fits more easily in space-limited vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160W x 2 at 2 Ohms:\u003c\/strong\u003e Provides higher output for compatible stereo speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Input with Auto Turn-On:\u003c\/strong\u003e Supports compatible factory-radio integration without a separate remote signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e High-pass and low-pass filtering helps match the amplifier to the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Protection Circuits:\u003c\/strong\u003e Helps protect against short circuit, heat, polarity, and low-impedance conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP700.2 has a small 7.28 x 4.92 x 1.93-inch chassis, a double-sided 2-layer circuit board, and surface-mount-device construction. Its Class D design and MOSFET DC-DC PWM power supply are intended to provide an efficient compact amplifier platform. The chassis includes power, speaker, RCA, and high-level input connections, along with crossover, gain, and bass-boost controls.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely to a stable vehicle surface with adequate ventilation, avoiding cardboard or flexible plastic trim panels. Use a properly fused power connection, a short solid chassis ground, and correctly sized wiring; a 4 AWG amplifier wiring kit is recommended for installation. Keep stereo speaker loads at 2 ohms or higher per channel, and use a 4-ohm or higher load when the amplifier is bridged.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614315274310,"sku":"CER-CVP700-2","price":170.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Un3DzUOmL.jpg?v=1784366067"},{"product_id":"cerwin-vega-cvpm10001d-mini-mono-class-d-amplifier","title":"Cerwin Vega CVPM10001D Mini Mono Class D Amplifier","description":"\u003cp\u003eThe Cerwin Vega CVPM10001D is a compact mono car amplifier designed to power a subwoofer system without requiring a large amplifier mounting footprint. Its single-channel Class D design delivers 500 watts RMS at 2 ohms or 310 watts RMS at 4 ohms. It is a practical choice for adding controlled low-frequency output to an aftermarket car audio system.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building a dedicated bass channel alongside factory or aftermarket full-range speakers. The variable low-pass crossover lets the amplifier focus on bass frequencies while the main speakers handle mids and highs. Its 2-ohm mono stability provides flexibility when selecting and wiring compatible subwoofers.\u003c\/p\u003e\u003cp\u003eFull Class D topology and a full PWM power supply support efficient operation in a small chassis. The amplifier is rated for 0.1% THD at 1 kHz and 4 ohms, with a damping factor greater than 70. A variable Vega Bass Boost control can add up to 12 dB at 45 Hz when used carefully with a suitable subwoofer and enclosure.\u003c\/p\u003e\u003cp\u003eThe CVPM10001D provides both high-level and low-level signal input capability, allowing integration with many factory and aftermarket source units. Its input sensitivity range is 0.15V to 6.0V, and the low-level input impedance is 20 kOhms. A remote level-control port supports convenient adjustment of the bass channel from the cabin when a compatible remote control is used.\u003c\/p\u003e\u003cp\u003eMeasuring just 7.64 inches long, the amplifier can fit in many under-seat, trunk, or custom-panel installations where space is limited. The compact housing includes an ambient backlit Cerwin Vega logo, plus power and protection indication. Use it with a correctly wired 2-ohm or 4-ohm subwoofer load, appropriate vehicle power wiring, and an inline fuse near the battery.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Output:\u003c\/strong\u003e Delivers dedicated subwoofer power from a compact one-channel amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS at 2 Ohms:\u003c\/strong\u003e Supports compatible 2-ohm subwoofer configurations with 500 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts bass-channel cutoff from 35 Hz to 500 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVega Bass Boost:\u003c\/strong\u003e Adds adjustable low-frequency boost up to 12 dB at 45 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Connects to speaker-level or RCA-level source signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mini Chassis:\u003c\/strong\u003e Helps simplify installation where amplifier space is limited.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVPM10001D uses a compact metal amplifier chassis with Full Class D circuitry, internal ATM mini fuses, status indicators, and an ambient backlit logo. Side-panel controls provide access to gain, low-pass crossover, and bass-boost adjustments. The amplifier measures 7.64 x 3.7 x 1.47 inches (194 x 95 x 37.3 mm).\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid, ventilated surface away from heat, moisture, vibration, and combustible materials. Cerwin Vega recommends a minimum 8-gauge power and ground connection, with 4-gauge wiring recommended for monoblock amplifiers; use an external fuse close to the vehicle battery and match the speaker load to the amplifier's 2-ohm or 4-ohm mono capability. Begin subwoofer low-pass tuning around 80 to 120 Hz, then set gain conservatively to avoid audible distortion.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614315831366,"sku":"CER-CVPM10001D","price":225.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61zVwmHbrtL.jpg?v=1784366137"},{"product_id":"cerwin-vega-cvpm400-4d-4-channel-class-d-amplifier","title":"Cerwin-Vega CVPM400.4D 4-Channel Class-D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVPM400.4D is a compact four-channel car audio amplifier designed to add dedicated power to front and rear speakers. It is a practical choice for replacing the limited output of a factory radio or supporting an aftermarket head unit. Its four-channel layout can drive a full speaker system or be configured for a three-channel setup using two bridged channels.\u003c\/p\u003e\u003cp\u003eRated at 60 watts RMS per channel at 4 ohms, the CVPM400.4D is suited to efficiently powering compatible coaxial or component speakers. It can also deliver 90 watts RMS per channel at 2 ohms when the speaker load and installation are appropriate. The amplifier is designed for clean, controlled speaker output rather than relying on head-unit power alone.\u003c\/p\u003e\u003cp\u003eFull Class-D topology and a full PWM power supply help the amplifier provide useful output from a notably small chassis. The compact 7.64-inch-long enclosure can make placement easier in vehicles with limited installation room. A 10.0 to 17.0V DC operating range supports use in conventional negative-ground 12V vehicle electrical systems.\u003c\/p\u003e\u003cp\u003eBuilt-in high-pass filtering is adjustable from 15 to 250 Hz, allowing the amplifier to be matched to door, dash, or rear-deck speakers. The high-pass crossover is always active, with its lowest setting intended to function close to full-range operation. Vega Bass Boost provides adjustable low-frequency boost from 0 to +12 dB at 45 Hz for systems that can accommodate it.\u003c\/p\u003e\u003cp\u003eThe CVPM400.4D accepts high- or low-level input signals, making it adaptable to many factory and aftermarket source units. It also includes power and protection status indicators, a remote level-control port, and bridge capability for two 4-ohm speaker loads. Pair it with properly matched speakers, suitable wiring, and a fused power connection for a compact multi-speaker upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Design:\u003c\/strong\u003e Powers front and rear speakers from one compact amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology:\u003c\/strong\u003e Delivers efficient amplification in a small chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS at 4 Ohms:\u003c\/strong\u003e Provides dedicated power for compatible full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Stereo Operation:\u003c\/strong\u003e Supports 90W RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable High-Pass Filter:\u003c\/strong\u003e Helps protect speakers from unwanted low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Works with speaker-level or RCA source signals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVPM400.4D uses a compact digital amplifier platform with a full PWM power supply and an internal ATC mini fuse. Its side-panel controls provide access to gain, high-pass crossover adjustment, bass boost, input connections, power terminals, and speaker terminals. Power and protection LEDs help indicate normal operation or a protection condition.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a solid, ventilated surface with its controls accessible after mounting. Use at least 8-gauge power and ground wire, 18-gauge remote wire, and a properly sized external fuse near the vehicle battery; maintain a minimum 2-ohm stereo load or 4-ohm bridged load. For speaker systems, begin high-pass adjustment around 60 to 80 Hz and set gain carefully to match the source unit without using it as a volume control.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614316224582,"sku":"CER-CVPM400-4D","price":217.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618zAZJW9XL.jpg?v=1784366182"},{"product_id":"cerwin-vega-cvpro2k4-4-channel-class-d-car-amplifier","title":"Cerwin-Vega CVPRO2K4 4-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVPRO2K4 is a four-channel Class D car audio amplifier for systems that need substantial power in a compact chassis. It can run front and rear speakers from four channels or be bridged for higher-power two-channel applications. Its 2-ohm-stable channel design provides flexibility when matching the amplifier to compatible speaker loads.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to enthusiasts building a high-output speaker system, upgrading component speakers, or designing a custom multi-amplifier installation. It supplies 325 watts RMS per channel at 4 ohms or 520 watts RMS per channel at 2 ohms. For bridged configurations, it is rated at 1,000 watts RMS per pair of channels into 4 ohms.\u003c\/p\u003e\u003cp\u003eThe CVPRO2K4 uses a full-range Class D topology and a full PWM power supply. Its specified bandwidth extends from 15 Hz to 20 kHz, allowing it to support bass, midrange, and high-frequency drivers when the system is configured appropriately. A damping factor greater than 150 and a specified THD figure of 0.1% at 1 kHz and 4 ohms support controlled signal delivery.\u003c\/p\u003e\u003cp\u003eSystem tuning is handled with selectable high-pass, flat, and low-pass crossover modes. The crossover network uses a 12 dB-per-octave slope, with variable high-pass, low-pass, and subsonic-filter adjustments. Variable bass boost is also provided for users who need to tailor low-frequency response carefully.\u003c\/p\u003e\u003cp\u003eDesigned for vehicle installation, the CVPRO2K4 has a compact 10.4 by 8.8 by 2.6 inch footprint. RCA preamp inputs connect the amplifier to a compatible source unit, while power, ground, remote-turn-on, and speaker terminals support a conventional amplified car-audio installation. Power\/protection and clipping indicators provide at-a-glance operating status.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class D Design:\u003c\/strong\u003e Powers a full speaker system from a compact, efficient amplifier platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Channels:\u003c\/strong\u003e Supports compatible 2-ohm speaker loads on each unbridged channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Output:\u003c\/strong\u003e Combines channel pairs for higher-power 4-ohm speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Helps match output frequencies to speakers, subs, or pro-audio drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Provides adjustable low-frequency boost from 0 to 12 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus And Clip LEDs:\u003c\/strong\u003e Shows power, protection, and clipping status during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVPRO2K4 uses a rugged, ventilated amplifier chassis with a compact footprint intended for custom vehicle audio installations. Its full PWM power supply, high-current design, and protection-status indication are intended for demanding amplified systems. The amplifier measures 10.4 by 8.8 by 2.6 inches, so it can fit where larger multi-channel amplifiers may be difficult to mount.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a solid surface with ventilation around the chassis and keep its control panel accessible for adjustment. Use a negative-ground 12-volt vehicle electrical system, route RCA signal cables away from power wiring where practical, and use properly fused power wiring. Cerwin-Vega recommends 0\/1-gauge OFC power and ground wire, and the amplifier is designed for a 150-amp fuse rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614319337542,"sku":"CER-CVPRO2K4","price":586.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61yfZXh8N9L.jpg?v=1784366235"},{"product_id":"cerwin-vega-eq770-7-band-parametric-car-audio-equalizer","title":"Cerwin-Vega EQ770 7-Band Parametric Car Audio Equalizer","description":"\u003cp\u003eThe Cerwin-Vega EQ770 is a 7-band car audio equalizer designed to give a compatible mobile audio system more direct control over tonal balance and signal level. It is installed between a source unit and external amplifiers, making it useful when a system needs more tuning flexibility than basic head-unit controls provide. Dedicated front, rear, and subwoofer outputs support a multi-amplifier system layout.\u003c\/p\u003e\u003cp\u003eThis processor is intended for listeners building or refining an amplified car audio system with separate bass control. Its seven EQ controls address fixed center frequencies from 50 Hz through 16 kHz, helping users adjust bass weight, vocal presence, and high-frequency balance. A master volume control and separate subwoofer-level control make it easier to tailor overall and bass output from the front panel.\u003c\/p\u003e\u003cp\u003eThe EQ770 provides up to 7 volts RMS of output for sending a strong preamp-level signal to compatible amplifiers. Its specified 10 Hz to 50 kHz frequency response, 90 dB signal-to-noise ratio, and 70 dB channel separation support clean signal routing within a properly configured system. The unit uses an onboard 30V bipolar switching power supply.\u003c\/p\u003e\u003cp\u003eFor bass-system integration, the EQ770 includes a selectable low-pass frequency setting at 60 Hz or 90 Hz. This provides a simple way to choose the low-pass point used for the subwoofer output. A front-to-rear fader control is also provided for systems using four speakers.\u003c\/p\u003e\u003cp\u003eSource flexibility includes main, auxiliary, and AUX 2\/MP3 input options, with an AUX\/Main source selector and auxiliary gain control. The EQ770 is a practical upgrade for systems using external amplifiers and RCA signal connections. Its night-illumination design keeps the front-panel controls visible during nighttime driving.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Band Equalizer:\u003c\/strong\u003e Adjusts seven fixed frequency ranges for more detailed tonal tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7V RMS Output:\u003c\/strong\u003e Sends a high-level preamp signal to compatible external amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer Level Control:\u003c\/strong\u003e Adjusts bass-output level independently from the main volume.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Low-Pass Filter:\u003c\/strong\u003e Offers 60 Hz or 90 Hz subwoofer frequency selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree Preamp Output Zones:\u003c\/strong\u003e Provides dedicated front, rear, and subwoofer signal outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAUX and MP3 Inputs:\u003c\/strong\u003e Adds source options beyond the main audio input.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe EQ770 uses a compact under-dash processor layout with front-panel rotary controls for volume, subwoofer level, fader, auxiliary gain, and equalizer adjustment. Its RCA input and output connections are nickel-plated, and the front panel includes night illumination. The control layout places frequently adjusted system settings within easy reach.\u003c\/p\u003e\u003cp\u003eMount the unit beneath the dashboard or on a suitable interior hump using the supplied-style bracket arrangement described in the manual. The wiring diagram routes the main source into the equalizer, then routes front, rear, and subwoofer outputs to their respective external amplifiers; it also requires switched +12V, ground, and remote-turn-on connections. Use the 60 Hz or 90 Hz low-pass selection with the subwoofer amplifier path, then set output levels conservatively during system tuning.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614322057286,"sku":"CER-EQ770","price":151.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51iswd0_9GL.jpg?v=1784366277"},{"product_id":"cerwin-vega-h15dv2-15-dual-2-ohm-car-subwoofer","title":"Cerwin-Vega H15DV2 15\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega H15DV2 is a 15-inch HED Series car audio subwoofer designed to add low-frequency output to a custom vehicle sound system. Its dual 2-ohm voice coils provide wiring flexibility for matching the subwoofer to a compatible mono amplifier. It is a passive subwoofer, so it requires an external amplifier and an enclosure.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners building a bass-focused system who have room for a full-size 15-inch driver and enclosure. Its 750-watt RMS power rating supports use in systems designed for substantial continuous bass output. The 25 Hz free-air resonance and 11 mm Xmax support low-frequency extension when used with an appropriate enclosure.\u003c\/p\u003e\u003cp\u003eThe H15DV2 uses a 4-inch voice coil, ferrite motor structure, and dual voice-coil layout. These elements are intended to support power handling and give installers impedance options. With both 2-ohm coils connected, it can be wired for either a 1-ohm parallel load or a 4-ohm series load.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and treated foam surround form the moving assembly, while the stamped-steel basket provides the mounting structure. The driver has a sensitivity rating of 86 dB at 1 watt\/1 meter. Its published Thiele\/Small parameters can help an experienced installer or enclosure builder plan a system around the subwoofer.\u003c\/p\u003e\u003cp\u003eThe H15DV2 can be used in either sealed or ported enclosures, allowing the system to be tailored to installation space and listening preferences. A sealed design is commonly selected for a more compact enclosure approach, while a ported design is commonly used when enclosure volume and tuning are planned for greater low-frequency output. Confirm amplifier stability, enclosure dimensions, and vehicle clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch HED Subwoofer:\u003c\/strong\u003e Provides a large cone area for a bass-focused car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Power Handling:\u003c\/strong\u003e Matches with an amplifier sized for 750 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Voice Coil:\u003c\/strong\u003e Supports the driver's published continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor:\u003c\/strong\u003e Provides the magnetic motor structure for the woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Compatibility:\u003c\/strong\u003e Allows enclosure selection based on system goals and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H15DV2 combines a polypropylene cone, treated foam surround, ferrite magnet, and stamped-steel basket. Its published overall diameter is 15.63 inches, and its overall height is 8.39 inches. The 4-inch voice coil and 11 mm maximum linear excursion specification are part of its bass-driver design.\u003c\/p\u003e\u003cp\u003eAllow for a 13.94-inch cutout and at least 7.66 inches of mounting depth, plus clearance for terminals and enclosure construction. Connect both voice coils and select series or parallel wiring only when the connected amplifier is stable at the resulting load. Use the published parameters when designing a sealed or ported enclosure, and secure the driver with appropriate mounting hardware.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614324154438,"sku":"CER-H15DV2","price":293.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FKwaH7J3L.jpg?v=1784366313"},{"product_id":"cerwin-vega-h15dv4-15-dual-4-ohm-subwoofer","title":"Cerwin-Vega H15DV4 15\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega H15DV4 is a 15-inch HED Series car audio subwoofer designed to add substantial low-frequency output to a custom vehicle sound system. Its dual 4-ohm voice coils provide wiring flexibility for matching a compatible mono or multi-channel amplifier. It is intended for listeners building a dedicated bass system rather than relying on factory speakers alone.\u003c\/p\u003e\u003cp\u003eWith a 750-watt RMS power rating and 2,250-watt maximum rating, the H15DV4 is suited to systems that need a large-diameter woofer with meaningful power capability. Its 15-inch cone area helps move air for weighty bass reproduction. The 27 Hz resonant frequency supports low-frequency extension when the driver is used in a properly designed enclosure.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a hybrid polypropylene and treated paper cone to balance rigidity and responsiveness. A stitch-reinforced treated TPE foam surround is designed to support extended cone travel, while the ferrite motor structure supplies the magnetic force needed for controlled operation. This combination gives the H15DV4 a bass-forward character appropriate for high-output car audio builds.\u003c\/p\u003e\u003cp\u003eDual 4-ohm coils allow the H15DV4 to be wired for either a 2-ohm parallel load or an 8-ohm series load. Both voice coils should be connected to an amplification source, and the amplifier must be stable at the final impedance. This makes the subwoofer useful for installers tailoring a system around an amplifier's rated load capability.\u003c\/p\u003e\u003cp\u003eThe H15DV4 can be installed in either a sealed or ported subwoofer enclosure. A sealed design is suited to controlled bass response, while a ported enclosure can emphasize output when designed for the driver. Its 7.66-inch mounting depth and 13.94-inch cutout requirement should be checked carefully before selecting an enclosure or mounting location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e15-Inch HED Woofer:\u003c\/strong\u003e Large cone area supports strong low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Coils:\u003c\/strong\u003e Supports 2-ohm parallel or 8-ohm series wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Matches with appropriately rated external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone:\u003c\/strong\u003e Polypropylene and treated paper balance strength and response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Foam Surround:\u003c\/strong\u003e Supports excursion while maintaining cone support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Use:\u003c\/strong\u003e Works with either enclosure approach.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H15DV4 is built around a stamped-steel basket, ferrite ceramic magnet, hybrid cone, and treated foam surround. Its 4-inch voice coil diameter and 11 mm Xmax are part of a design intended for substantial excursion and power handling. The overall driver diameter is 15.63 inches, with an overall height of 8.39 inches.\u003c\/p\u003e\u003cp\u003ePlan the installation around the 13.94-inch cutout diameter and 7.66-inch mounting depth, leaving adequate clearance behind the motor structure. Wire both 4-ohm voice coils with correct polarity and choose either series or parallel wiring only if the amplifier supports the resulting 8-ohm or 2-ohm load. Use a securely mounted sealed or ported enclosure, protect wiring from sharp edges, and use grommets where wires pass through drilled metal openings.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614329102406,"sku":"CER-H15DV4","price":293.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FKwaH7J3L_3b32d471-23d5-42d0-ad79-fe99caa3f3a1.jpg?v=1784366355"},{"product_id":"cerwin-vega-h25-2-5-full-range-car-speakers","title":"Cerwin-Vega H25 2.5\" Full-Range Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H25 is a pair of compact 2.5-inch full-range car speakers for replacing small factory speakers or completing a custom vehicle audio installation. Their compact mounting dimensions suit locations where a larger door or dash speaker will not fit. Each speaker uses a 4-ohm nominal impedance for compatibility with many car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eWith 10 watts RMS and 30 watts maximum power handling per speaker, the H25 is intended for low-power factory-radio or appropriately matched amplified applications. Its 83 Hz to 20 kHz frequency-response specification supports a broad range of musical detail within a small-speaker format. A sensitivity rating of 82 dB at 1W\/1m indicates that proper power matching is important for expected output.\u003c\/p\u003e\u003cp\u003eThe H25 uses a responsive treated paper cone to reproduce the audible range assigned to the speaker. A UV-treated foam surround supports cone movement while helping the assembly withstand normal automotive conditions. The full-range design provides a practical solution where a separate tweeter and crossover system are not required.\u003c\/p\u003e\u003cp\u003eA strontium ferrite magnet motor structure supports the speaker's operation, while the powder-coated stamped-steel basket provides a rigid mounting foundation. This construction is designed to help control unwanted vibration at the speaker frame. The result is a compact replacement speaker focused on clear, direct sound in small factory locations.\u003c\/p\u003e\u003cp\u003eSold as a pair, the H25 can be used for left- and right-channel replacement in compatible vehicle positions. A speaker fitment adapter is included to assist with installation in applicable factory locations. Cerwin-Vega identifies the H25 for drop-in use in select GM, Ford, Chrysler, Jeep, Dodge, and Asian-import factory-speaker locations, but vehicle-specific fitment should always be checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Full-Range Design:\u003c\/strong\u003e Fits compact speaker locations while covering a broad frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides responsive full-range sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and material durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrontium Ferrite Magnet:\u003c\/strong\u003e Provides the speaker's magnetic motor structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Adapter Included:\u003c\/strong\u003e Helps adapt the speakers for applicable factory locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H25 combines a treated paper cone, UV-treated foam surround, strontium ferrite woofer magnet, and powder-coated stamped-steel basket. Its basket construction provides a stable frame for the compact driver. The set is sold as two speakers for stereo installation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has sufficient space for the 2.36-inch overall diameter, 2.05-inch cutout, 1.26-inch mounting depth, and 1.42-inch overall height before purchase. Match the speakers to a 4-ohm audio system and keep amplifier power appropriate for the 10-watt RMS rating per speaker. The included fitment adapter may assist in compatible factory locations, though mounting and wiring requirements vary by vehicle.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614330904646,"sku":"CER-H25","price":89.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61K0-6ZdeRL.jpg?v=1784366396"},{"product_id":"cerwin-vega-h35-3-5-2-way-coaxial-speakers","title":"Cerwin-Vega H35 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H35 is a pair of compact 3.5-inch, 2-way coaxial car speakers designed for replacing factory speakers in space-limited locations. Each speaker combines a woofer and tweeter in one assembly, helping simplify a full-range speaker upgrade. It is suited to vehicles with compatible 3.5-inch factory locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith 40 watts RMS and 120 watts maximum power handling per speaker, the H35 is intended for use with a compatible factory radio or an appropriately matched aftermarket amplifier. Its 4-ohm nominal impedance suits common car-audio speaker circuits. The 84 Hz to 20 kHz published frequency response covers midrange and high-frequency duties in a compact format.\u003c\/p\u003e\u003cp\u003eThe H35 uses a responsive polypropylene woofer cone with a UV-treated foam surround. This material combination is designed to support controlled cone movement while adding resistance to sun-related wear. A strontium ferrite woofer magnet provides the motor structure for the woofer section.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI balanced-dome tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter. Built-in tweeter protection is included to help protect the high-frequency driver during demanding playback.\u003c\/p\u003e\u003cp\u003eFor a clean installation, the H35 has a 3.11-inch cutout requirement and a 1.54-inch mounting depth. Its rigid stamped-steel basket is powder coated, and the pair does not include grilles according to the manufacturer specification chart. Confirm vehicle-specific fitment, panel clearance, and mounting-hole alignment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports power matching with compatible head units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a lightweight cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Helps support long-term durability in vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Routes frequencies between drivers and protects the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H35 uses a powder-coated, rigid stamped-steel basket with a strontium ferrite woofer magnet. Its woofer uses a polypropylene cone and UV-treated foam surround, while the centrally mounted PEI balanced-dome tweeter uses a neodymium magnet. The set is sold as a pair and is specified without grilles.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 3.11-inch cutout, 1.54-inch mounting depth, and 3.43-inch speaker diameter before ordering. Mount the speakers securely to a flat baffle and seal the frame to reduce air leaks around the mounting surface. Observe speaker polarity when wiring and use an amplifier or receiver compatible with 4-ohm speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614349189190,"sku":"CER-H35","price":73.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_IM6REBML.jpg?v=1784366746"},{"product_id":"cerwin-vega-h40-4-2-way-coaxial-speaker-set","title":"Cerwin-Vega H40 4\" 2-Way Coaxial Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H40 is a pair of 4-inch, 2-way coaxial car speakers designed to replace compact factory speakers or support a custom full-range audio upgrade. Its coaxial layout places the tweeter and woofer together, helping simplify installation where space is limited. The set is intended for vehicle locations that accept a 4-inch speaker and have sufficient mounting clearance.\u003c\/p\u003e\u003cp\u003eRated at 50 watts RMS and 150 watts maximum, the H40 is suited to systems using a compatible factory radio or aftermarket amplification. Its 4-ohm nominal impedance matches the common impedance used by many car-audio speaker systems. The 85 Hz to 20 kHz frequency response focuses on midrange and high-frequency reproduction, with bass support available from larger speakers or a subwoofer when desired.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles the main vocal, midrange, and upper-bass duties. The UV-treated foam surround supports cone movement and is designed for durability in automotive use. With an 84 dB sensitivity rating, proper power matching and clean signal setup are important for getting the most from the speakers.\u003c\/p\u003e\u003cp\u003eThe H40 uses a dynamically balanced 1\/2-inch PEI tweeter with a neodymium magnet for high-frequency reproduction. An integrated crossover directs frequencies between the woofer and tweeter, while built-in tweeter protection helps safeguard the high-frequency driver. This design keeps the system compact without requiring an external crossover module.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the H40 can serve in dash, door, or other compact factory speaker positions when the vehicle's fitment and clearances match its measurements. It is sold as a stereo pair and includes mesh steel grilles for installations where the speakers are exposed. Confirm the 3.70-inch cutout requirement and 1.81-inch mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Rating:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides responsive midrange and upper-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2-Inch PEI Tweeter:\u003c\/strong\u003e Handles high frequencies in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Protection:\u003c\/strong\u003e Helps protect the tweeter during high-level playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Steel Grilles Included:\u003c\/strong\u003e Adds protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H40 uses a powder-coated, rigid stamped steel basket, a polypropylene cone, and a UV-treated foam surround. Its woofer uses a strontium ferrite magnet, while the tweeter uses a neodymium magnet. These materials support a compact, vehicle-oriented speaker design.\u003c\/p\u003e\u003cp\u003eMeasure the vehicle's opening, panel clearance, and window or mechanism clearance before mounting. The required cutout diameter is 94 mm (3.70 inches), and mounting depth is 46 mm (1.81 inches). Mount the speaker securely to a flat baffle, seal around the frame to reduce air leaks, observe polarity, and use a grommet where speaker wire passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614356267078,"sku":"CER-H40","price":86.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71k-d65oJQL.jpg?v=1784366793"},{"product_id":"cerwin-vega-h410-4x10-2-way-coaxial-speakers","title":"Cerwin-Vega H410 4\"x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H410 is a 4-inch by 10-inch, 2-way coaxial full-range speaker set for replacing compatible factory car speakers. It combines a woofer and tweeter in each speaker to cover bass, midrange, and high-frequency content from one mounting location. The set is sold as a pair for a matched left-and-right speaker upgrade.\u003c\/p\u003e\u003cp\u003eDesigned for vehicles using the uncommon 4-inch by 10-inch speaker format, the H410 helps retain a factory-style fit while updating worn or limited original speakers. Its 4-ohm nominal impedance suits typical mobile-audio speaker applications. Confirm the vehicle's opening dimensions, mounting depth, and panel clearance before installation.\u003c\/p\u003e\u003cp\u003eThe H410 is rated for 70 watts RMS and 210 watts maximum power handling. With a 90 Hz to 20 kHz frequency response and 89 dB sensitivity at 1 watt\/1 meter, it is intended for full-range playback in an appropriate vehicle installation. It can be used as part of a basic speaker replacement or in a system supported by a properly matched amplifier.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and UV-treated foam surround form the low- and mid-frequency section of each speaker. The coaxial 1-inch PEI tweeter is dynamically balanced and uses a neodymium magnet. An integrated crossover directs frequencies between the woofer and tweeter while providing tweeter protection.\u003c\/p\u003e\u003cp\u003eFor structural support, the H410 uses a rigid stamped-steel basket with a powder-coated finish and a strontium ferrite woofer magnet. Its 2.36-inch mounting depth can be useful where rear-deck or door-panel space is limited, but depth behind the mounting surface must be checked. The speakers do not include grilles according to the manufacturer specification table.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\"x10\" Coaxial Format:\u003c\/strong\u003e Fits compatible oval speaker openings with integrated full-range drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Separates woofer and tweeter frequency duties internally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement and durability in vehicle use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H410 combines a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and neodymium tweeter magnet. Its rigid stamped-steel basket is powder coated, and the coaxial layout places the tweeter within the woofer assembly. This construction is designed for a conventional full-range vehicle-speaker installation.\u003c\/p\u003e\u003cp\u003eUse the 9.41-inch by 3.78-inch cutout requirement, 10.90-inch by 4.33-inch overall frame size, and 2.36-inch mounting depth to verify fitment. Mount the speakers securely to a flat baffle and seal the frame to help prevent air leaks; check window, trim-panel, and structural clearance before cutting. Observe speaker polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614358888518,"sku":"CER-H410","price":112.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71eb9fvlruL.jpg?v=1784366835"},{"product_id":"cerwin-vega-h46-4x6-2-way-coaxial-speakers","title":"Cerwin-Vega H46 4\"x6\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H46 is a pair of 4\" x 6\" 2-way coaxial full-range car speakers for replacing compatible factory speakers or refreshing an existing vehicle audio system. Its compact oval format is intended for vehicle locations that accept 4\" x 6\" speakers. The pair combines a woofer and centrally mounted tweeter to cover bass, midrange, and high-frequency playback from a single speaker location.\u003c\/p\u003e\u003cp\u003eEach H46 uses a polypropylene woofer cone with a UV-treated foam surround. This combination is designed to support responsive midbass and midrange reproduction while maintaining the cone's movement at the speaker edge. A 1\" PEI tweeter handles the upper frequencies for added detail in vocals, percussion, and instruments.\u003c\/p\u003e\u003cp\u003eThe H46 is rated for 50 watts RMS and 150 watts maximum power handling, with a 4-ohm nominal impedance. Its published frequency response is 83 Hz to 20 kHz, with a sensitivity rating of 83 dB at 1 watt\/1 meter. These specifications make it suited to compatible factory-radio replacement applications or systems using appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the woofer and tweeter, while tweeter protection is included to help safeguard the high-frequency driver. The tweeter uses a neodymium magnet, and the woofer uses a strontium ferrite magnet. Together, these components support the H46's coaxial design without requiring separate external crossover hardware.\u003c\/p\u003e\u003cp\u003eThe H46 is sold as a pair for matching left and right speaker positions. Its 1.73\" mounting depth can be helpful where installation space is limited, but vehicle fitment should still be checked before purchase. For a more complete audio upgrade, these speakers can be paired with a compatible 4-ohm source unit or amplifier and installed in properly sized factory or custom locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory-radio or amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\" PEI Tweeter:\u003c\/strong\u003e Reproduces high frequencies in the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a responsive woofer diaphragm for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between woofer and tweeter with tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker components.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H46 uses a responsive polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and powder-coated rigid stamped steel basket. A strontium ferrite woofer magnet and neodymium tweeter magnet are used in the driver assembly. The speakers are supplied as a matched pair and do not include grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 4\" x 6\" speaker and compare available space with the 5.71\" x 3.50\" cutout requirement, 1.73\" mounting depth, and 6.10\" x 4.02\" overall dimensions. Use a compatible 4-ohm audio source or amplifier, and follow vehicle-specific wiring and mounting practices. Because fitment hardware and wiring accessories are not specified, installers should verify what their vehicle requires before installation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614360395846,"sku":"CER-H46","price":86.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71kZfYP6ewL.jpg?v=1784366870"},{"product_id":"cerwin-vega-h52-5-25-2-way-coaxial-speaker-set","title":"Cerwin-Vega H52 5.25\" 2-Way Coaxial Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H52 is a pair of 5.25-inch, 2-way coaxial car speakers for replacing worn factory speakers or building a compact full-range system. Each speaker combines a woofer and centrally mounted tweeter to cover bass, midrange, and high-frequency content from one mounting location. It is designed for vehicles with suitable 5.25-inch speaker locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith a 70W RMS and 210W maximum power rating, the H52 is suited to factory-radio upgrades as well as compatible aftermarket amplification. Its 4-ohm nominal impedance is common in mobile-audio systems. The 88Hz-20kHz frequency response emphasizes full-range playback, while deeper bass is typically handled by a separate subwoofer when desired.\u003c\/p\u003e\u003cp\u003eThe H52 uses a polypropylene woofer cone to reproduce midrange and lower-frequency detail. A UV-treated foam surround supports cone movement while helping the speaker withstand the changing conditions found in vehicle interiors. The result is a practical coaxial format for daily driving and straightforward speaker replacement projects.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter, while built-in tweeter protection is intended to help guard against excessive high-frequency stress. This arrangement keeps the installation simpler than a separate-component speaker system.\u003c\/p\u003e\u003cp\u003eA strontium ferrite woofer magnet and powder-coated stamped-steel basket provide the speaker's motor and mounting structure. The 1.77-inch mounting depth can be useful where door or rear-deck space is limited, but vehicle-specific clearance should always be checked before installation. Mesh grilles are included for installations where the speakers are exposed rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter output in a compact, single-speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports use with compatible factory radios or aftermarket amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Handles high-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Helps divide frequencies between drivers and protect the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Grilles Included:\u003c\/strong\u003e Adds protection for custom or exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H52 uses a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and a powder-coated rigid stamped-steel basket. Its coaxial layout places the PEI tweeter within the woofer assembly, reducing the number of separate components needed for a conventional speaker upgrade. The speakers are sold as a pair and include mesh grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the intended location accepts a 5.25-inch speaker and check the 4.45-inch cutout diameter, 5.08-inch overall diameter, and 1.77-inch mounting depth before ordering. Mount the speaker securely to a flat, sealed baffle surface, keep wiring protected from sharp metal edges, and observe speaker polarity. The H52 can be used in door or rear-deck locations where the vehicle provides sufficient clearance.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614361083974,"sku":"CER-H52","price":114.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71DvSPDxeAL.jpg?v=1784366908"},{"product_id":"cerwin-vega-h652-6-5-2-way-coaxial-speakers","title":"Cerwin-Vega H652 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H652 is a pair of 6.5-inch, 2-way coaxial full-range car speakers designed for replacing compatible factory speakers or building a straightforward speaker upgrade. Each speaker combines a woofer and tweeter in one assembly, helping deliver a broad frequency range from a standard-size mounting location. The pair is rated for 90 watts RMS and 270 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eThis HED Series model is intended for listeners who want clearer full-range sound from a 6.5-inch speaker position without moving to a separate component-speaker setup. Its 4-ohm nominal impedance is suited to common car-audio speaker systems that support 4-ohm loads. Confirm your vehicle's opening, mounting depth, and wiring arrangement before installation.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles bass and midrange duties, while the 1-inch PEI tweeter reproduces higher frequencies. The tweeter uses a neodymium magnet and a dynamically balanced design. Together, the coaxial layout provides a compact full-range solution for front or rear speaker locations where fitment permits.\u003c\/p\u003e\u003cp\u003eThe H652 uses an integrated crossover with tweeter protection to manage the handoff between the woofer and tweeter. This design supports smoother frequency transitions while helping protect the tweeter during higher-volume operation. The speaker's specified frequency response is 89 Hz to 20 kHz, with an 88 dB sensitivity rating at 1W\/1M.\u003c\/p\u003e\u003cp\u003eFor a complete vehicle system, the H652 can be used as a compatible replacement pair or combined with additional speakers and appropriate amplification. Its 1.77-inch mounting depth can be useful where door or rear-deck clearance is limited, but vehicle fitment should always be measured. Mesh grilles are included for installations where the speakers are exposed rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 1-inch tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Power Handling:\u003c\/strong\u003e Supports systems matched to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Handles bass and midrange reproduction in a durable cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Provides the woofer with a durable, compliant outer suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter and includes tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Uses a rigid, powder-coated steel frame to support the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H652 uses a polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and strontium ferrite woofer magnet. Its basket is a powder-coated, rigid stamped-steel design. The speakers include mesh grilles and are sold as a pair.\u003c\/p\u003e\u003cp\u003eVerify a 4.88-inch cutout, 1.77-inch mounting-depth clearance, and 6.26-inch overall-diameter clearance at the intended location before purchase. Wire each speaker with correct polarity to a compatible 4-ohm car-audio channel. Use the included mesh grilles when the installation does not retain a suitable factory grille or panel.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614361935942,"sku":"CER-H652","price":121.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/710ZSqpN0iL.jpg?v=1784366950"},{"product_id":"cerwin-vega-h653-6-5-3-way-coaxial-speakers","title":"Cerwin-Vega H653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H653 is a pair of 6.5-inch, 3-way coaxial car speakers designed as a direct full-range upgrade from many factory door or rear-deck speakers. Each speaker combines a woofer, dedicated midrange driver, and tweeter in one assembly. This format helps add more complete sound coverage without requiring separate component crossovers.\u003c\/p\u003e\u003cp\u003eThe H653 uses a 6.5-inch polypropylene woofer for the lower frequencies, a 2.5-inch midrange for vocal and instrumental detail, and a 1-inch PEI balanced-dome tweeter for upper-frequency reproduction. Its published frequency response is 89 Hz to 20 kHz. With a 4-ohm nominal impedance, it is intended for conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003ePower handling is rated at 90 watts RMS and 270 watts peak per speaker. The pair is rated for 180 watts RMS and 540 watts peak combined. Its 88 dB sensitivity rating and integrated crossover make it suitable for use with a compatible factory radio or an external amplifier matched appropriately to the speakers.\u003c\/p\u003e\u003cp\u003eDurability-focused construction includes polypropylene cones, UV-treated foam surrounds, ferrite woofer magnets, and powder-coated stamped-steel baskets. The coaxial layout keeps the midrange and tweeter integrated with the woofer, simplifying installation where space is limited. Built-in tweeter protection is included as part of the internal crossover network.\u003c\/p\u003e\u003cp\u003eThe H653 is suited to listeners replacing worn factory speakers or building a straightforward full-range system in compatible factory locations. It can be used in door or rear-deck positions when the mounting dimensions and available depth are confirmed. For systems seeking deeper low bass, these speakers can be paired with a separate subwoofer and properly configured amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports 90 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Midrange Driver:\u003c\/strong\u003e Handles important midrange information between bass and treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail with a neodymium magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover Protection:\u003c\/strong\u003e Includes tweeter protection without an external crossover box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H653 uses a powder-coated, rigid stamped-steel basket with a ferrite woofer magnet, polypropylene cone, and UV-treated foam surround. Its 1-inch PEI tweeter and 2.5-inch midrange are mounted concentrically with the 6.5-inch woofer. The manufacturer specification sheet also lists grilles for this model.\u003c\/p\u003e\u003cp\u003eConfirm both the 4.88-inch cutout requirement and 1.77-inch mounting-depth requirement before installation, as factory 6.5-inch locations can vary by vehicle. Wire each speaker with correct polarity and use a compatible 4-ohm speaker channel. The integrated crossover simplifies hookup, but vehicle-specific mounting adapters, harnesses, or hardware may still be required depending on the installation location.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614362394694,"sku":"CER-H653","price":194.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71XYe0aitoL.jpg?v=1784366996"},{"product_id":"cerwin-vega-h65c-6-5-2-way-component-speaker-set","title":"Cerwin-Vega H65C 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H65C is a 6.5-inch, 2-way component speaker set designed for upgrading a vehicle’s front-stage audio. It separates the woofer and tweeter so they can be positioned independently for a more focused listening area than a typical coaxial speaker. The set is suited to factory-speaker replacements and custom car-audio installations where mounting space permits.\u003c\/p\u003e\u003cp\u003eA 6.5-inch polypropylene woofer handles bass and midrange duties, while the separate 1-inch PEI tweeter handles upper-frequency detail. This arrangement is intended to produce balanced output across its rated 88 Hz to 20 kHz frequency response. With 87 dB sensitivity and a 4-ohm nominal impedance, it is designed for common car-audio speaker applications.\u003c\/p\u003e\u003cp\u003eThe H65C is rated for 120 watts RMS and 360 watts maximum power handling. Its 79 Hz free-air resonance and polypropylene-cone woofer support a clear, controlled midbass foundation within a properly installed system. The 1-inch tweeter uses a neodymium magnet and dynamically balanced PEI construction for high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eDurability-focused construction includes a UV-treated foam surround, ferrite woofer magnet, and powder-coated stamped-steel basket. The rigid basket provides a stable mounting structure for the woofer, while the treated surround is intended for automotive use. An integrated crossover with tweeter protection manages the handoff between the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThis component set can be used when replacing separate factory woofer-and-tweeter systems or when building a custom front stage. Its 4.88-inch cutout diameter and 1.77-inch mounting depth should be checked against the vehicle’s available door, kick-panel, or custom-mounting space. Mesh grilles are included for installations where the drivers require added physical protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a more tailored installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched within the rated continuous-power range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Handles midbass and midrange reproduction with a responsive design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Reproduces high frequencies with a neodymium magnet assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected Crossover:\u003c\/strong\u003e Directs frequencies to the appropriate driver and protects the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Adds durability for long-term automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H65C uses polypropylene woofer cones, UV-treated foam surrounds, strontium ferrite woofer magnets, and dynamically balanced PEI tweeters with neodymium magnets. Each woofer is built around a powder-coated, rigid stamped-steel basket. The set also includes mesh grilles.\u003c\/p\u003e\u003cp\u003eConfirm the 4.88-inch cutout, 6.26-inch overall diameter, 1.77-inch mounting depth, and 2.13-inch overall height before installation. The component system uses crossovers between the amplifier or speaker-output connection, woofer, and tweeter, so correct polarity should be maintained throughout wiring. Install crossover components in a protected, ventilated location away from moisture and factory wiring looms where practical.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614381760582,"sku":"CER-H65C","price":212.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/719eAiubzgL.jpg?v=1784367351"},{"product_id":"cerwin-vega-h672-6-75-2-way-coaxial-speakers","title":"Cerwin-Vega H672 6.75\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H672 is a pair of 6.75-inch, 2-way coaxial car speakers designed to replace worn or basic factory door speakers. Its coaxial layout places the tweeter and woofer together, helping simplify installation where a single full-range speaker location is available. The set is intended for vehicle audio upgrades using a compatible factory radio or aftermarket amplifier.\u003c\/p\u003e\u003cp\u003eEach H672 combines a polypropylene woofer cone with a 1-inch PEI tweeter for full-range playback. The stated 87 Hz–20 kHz frequency response focuses this pair on midbass, midrange, and high-frequency detail rather than sub-bass reproduction. A 4-ohm nominal impedance supports use with common car-audio speaker outputs.\u003c\/p\u003e\u003cp\u003eWith 90 watts RMS and 270 watts maximum power handling, the H672 can be matched with amplification that delivers appropriate continuous power at 4 ohms. Its 86 dB sensitivity rating provides a useful reference when comparing output expectations with other speakers. For a balanced system, a subwoofer can be added separately for lower-frequency bass reproduction.\u003c\/p\u003e\u003cp\u003eThe woofer uses a UV-treated foam surround and a strontium ferrite magnet. Cerwin-Vega also specifies a powder-coated stamped-steel basket to provide a rigid mounting structure. These materials support the speaker's intended in-vehicle use while retaining the compact mounting profile of a coaxial design.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the woofer and tweeter, while tweeter protection is included in the design. This makes the H672 a practical choice for listeners seeking a straightforward full-range speaker replacement without separate external crossover modules. The speakers are sold as a pair for left-and-right installation positions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.75-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides the main midbass and midrange output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Divides frequencies between woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports durability around the woofer cone.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H672 uses a polypropylene cone, UV-treated foam surround, strontium ferrite woofer magnet, and dynamically balanced PEI tweeter with a neodymium magnet. Its powder-coated, rigid stamped-steel basket is designed to support stable mounting. Cerwin-Vega lists an integrated crossover with tweeter protection as part of the speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, and mounting-hole pattern before ordering. The stated cutout requirement is 5.59 inches and the mounting depth is 1.73 inches; adapters, harnesses, screws, or other vehicle-specific installation parts are not confirmed as included. Use a compatible 4-ohm speaker output and observe correct positive and negative polarity when wiring each speaker.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614384152646,"sku":"CER-H672","price":173.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61HeN4qfFhL.jpg?v=1784367390"},{"product_id":"cerwin-vega-h683-6x8-3-way-coaxial-speakers","title":"Cerwin-Vega H683 6x8\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H683 is a pair of 6x8-inch, 3-way coaxial full-range car speakers designed for factory-location speaker upgrades. It combines a woofer, midrange, and tweeter in each speaker to provide broad frequency coverage from a single mounting position. This makes it a practical option for vehicles that use the common 6x8-inch speaker format.\u003c\/p\u003e\u003cp\u003eEach H683 uses a 6x8-inch polypropylene woofer, a 2.5-inch midrange, and a 1-inch PEI tweeter. The multi-driver coaxial layout is intended to reproduce bass, vocal-range detail, and high frequencies without requiring separate component-speaker mounting locations. Its published frequency response is 87 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eThe polypropylene woofer cone is paired with a UV-treated foam surround for a durable moving assembly. A strontium ferrite woofer magnet supports the low- and mid-frequency section, while the PEI tweeter uses a neodymium magnet motor structure. This combination is built around the needs of everyday in-car listening and replacement-speaker installations.\u003c\/p\u003e\u003cp\u003eAn integrated crossover directs frequencies between the speaker elements and includes tweeter protection. That design helps the 1-inch balanced PEI tweeter handle high-frequency content as part of the coaxial assembly. The H683 has a 4-ohm nominal impedance and 87 dB sensitivity at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eSold as a pair, the H683 can be used with a compatible factory radio or an aftermarket amplifier that supports 4-ohm speakers. Its 2.28-inch mounting depth and 5 x 7.09-inch cutout requirement should be checked against the vehicle's available mounting space before installation. It is suited to listeners replacing worn factory 6x8-inch speakers while retaining a straightforward full-range speaker layout.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x8-Inch Woofer:\u003c\/strong\u003e Fits applications designed for 6x8-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer's primary sound-radiating surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Supports cone movement with UV-treated material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Handles the high-frequency portion of the audio range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Protection:\u003c\/strong\u003e Adds protection within the built-in crossover network.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H683 uses powder-coated rigid stamped-steel baskets, polypropylene woofer cones, UV-treated foam surrounds, and ferrite woofer magnets. Its coaxial structure places the 2.5-inch midrange and 1-inch dynamically balanced PEI tweeter over the woofer. The pair is finished in black and red and does not include speaker grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x8-inch speaker, has a 5 x 7.09-inch mounting cutout, and provides at least 2.28 inches of mounting depth. Connect the speakers with correct polarity to a 4-ohm-compatible head unit or amplifier. Mounting hardware and vehicle-specific adapters are not identified in the available product documentation, so verify required installation parts before purchase.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614388576326,"sku":"CER-H683","price":107.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71J4E8p-W9L.jpg?v=1784367442"},{"product_id":"cerwin-vega-h693-6x9-inch-3-way-coaxial-speakers","title":"Cerwin-Vega H693 6x9-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H693 is a pair of 6x9-inch, 3-way coaxial car speakers for replacing factory door, rear-deck, or hatch-area speakers where this size is supported. Each speaker combines its woofer, midrange, and tweeter in a single assembly to simplify a full-range upgrade. It is designed for vehicle audio systems using 4-ohm speakers.\u003c\/p\u003e\u003cp\u003eThis speaker set is suited to listeners who want a more complete frequency presentation from a conventional 6x9-inch location without installing separate component drivers. The 6x9-inch woofer handles the main bass and midrange range, while the dedicated 2.5-inch midrange and 1-inch tweeter support higher-frequency detail. Its published response range is 90 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and UV-treated foam surround form the primary moving assembly. This combination is intended to provide controlled cone movement while supporting long-term use in an automotive environment. The woofer uses a ferrite magnet motor structure.\u003c\/p\u003e\u003cp\u003eThe H693 uses a dynamically balanced 1-inch PEI tweeter to reproduce treble information. An integrated crossover directs frequencies among the speaker elements, and built-in tweeter protection is included. Together, these features keep the installation self-contained rather than requiring a separate external crossover.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 150 watts maximum power handling, the H693 can be used with a compatible factory radio or a properly configured external amplifier. It is sold as a pair for left\/right stereo installation. Verify vehicle fitment, mounting clearance, and wiring connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Woofer:\u003c\/strong\u003e Fits applications designed for the common oval speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Midrange:\u003c\/strong\u003e Adds dedicated coverage for vocal and instrument frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Reproduces upper-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer’s primary sound-producing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies internally and includes tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H693 uses a responsive polypropylene cone, UV-treated foam surround, ferrite woofer magnet, and powder-coated rigid stamped-steel basket. The coaxial driver assembly places the 2.5-inch midrange and 1-inch PEI tweeter within the 6x9-inch speaker format. This construction is intended for an all-in-one full-range car-speaker installation.\u003c\/p\u003e\u003cp\u003eCheck that the intended location accepts a 6x9-inch speaker and confirm the published 90 mm (3.54-inch) mounting-depth requirement before purchase. The manufacturer lists overall and cutout dimensions of 236 x 162.5 mm (9.29 x 6.40 inches), so vehicle-specific adapters, brackets, harnesses, or hardware may be needed depending on the application. Connect each speaker with correct polarity and use an amplifier or radio that supports a 4-ohm load.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614392213574,"sku":"CER-H693","price":101.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pJ5e0rw7L.jpg?v=1784367487"},{"product_id":"cerwin-vega-h69c-6-9-2-way-component-speaker-set","title":"Cerwin-Vega H69C 6×9\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H69C is a 6×9-inch, 2-way component speaker set designed for vehicle audio upgrades that need separate woofer and tweeter placement. It combines a pair of 6×9-inch woofers, separate 1-inch tweeters, and passive crossover networks. This layout helps replace limited factory speaker performance while allowing more intentional high-frequency placement.\u003c\/p\u003e\u003cp\u003eThe H69C is rated for 150 watts RMS and 450 watts maximum power per side at 4 ohms. With a 90 dB sensitivity rating and a 90 Hz to 20 kHz frequency response, it is suited to full-range front-stage or rear-deck applications. Its sound profile is built around solid midbass output, clear midrange reproduction, and dedicated high-frequency detail.\u003c\/p\u003e\u003cp\u003eEach woofer uses a responsive polypropylene cone with a UV-treated foam surround. The cone material is intended to maintain controlled bass and midrange response, while the surround supports long-term movement and durability. A strontium ferrite woofer magnet and rigid stamped-steel basket complete the main driver structure.\u003c\/p\u003e\u003cp\u003eSeparate 1-inch PEI balanced-dome tweeters handle the upper frequencies. The tweeters use neodymium magnets and connect through the included passive crossovers. Integrated tweeter protection is designed to help manage high-frequency delivery when the system is played at elevated levels.\u003c\/p\u003e\u003cp\u003eThe H69C is a component set rather than a drop-in coaxial speaker, so installation requires space for the woofers, tweeters, and crossover networks. It can be used with a compatible factory or aftermarket radio, but an amplifier matched appropriately to its 4-ohm load and RMS rating can provide additional headroom. It is a practical choice for systems where speaker placement and separation are part of the upgrade plan.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6×9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports amplifier matching up to 150 watts RMS per side.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Provide controlled bass and balanced midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeters:\u003c\/strong\u003e Handle high frequencies with a balanced-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to each speaker driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Protection:\u003c\/strong\u003e Adds protection within the integrated crossover network.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H69C uses polypropylene woofer cones, UV-treated foam surrounds, strontium ferrite woofer magnets, and powder-coated rigid stamped-steel baskets. The separate tweeters use PEI balanced domes with neodymium magnets. Mesh grilles are included for installations where the speakers require added physical protection.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's available mounting space before installation: each woofer requires a 5.93×8.68-inch cutout and 3.17 inches of mounting depth. Mount the passive crossovers in a protected, ventilated location away from moisture, then connect the amplifier or radio output to the crossover input, the woofer to the MID output, and the tweeter to the TWT output while observing polarity. For tweeter flush mounting, the installation guide specifies a 1.85-inch opening and at least 1 inch of panel clearance behind the mounting location.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614395260998,"sku":"CER-H69C","price":248.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71evkJWfu9L.jpg?v=1784367531"},{"product_id":"cerwin-vega-h6e10dv-dual-10-vented-subwoofer-enclosure","title":"Cerwin-Vega H6E10DV Dual 10\" Vented Subwoofer Enclosure","description":"\u003cp\u003eThe Cerwin-Vega H6E10DV is a loaded passive subwoofer enclosure built around two 10-inch HED Series subwoofers. It gives a car audio system a dedicated low-frequency foundation without requiring the buyer to select an enclosure and separate woofers. The preloaded design is intended for drivers who want a straightforward bass upgrade from a single enclosure.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want more bass presence for daily driving and bass-forward music. Its dual-subwoofer layout provides greater cone area than a single 10-inch enclosure. The finished assembly keeps the system focused on low-frequency reproduction while leaving the main speakers to handle mids and highs.\u003c\/p\u003e\u003cp\u003eThe H6E10DV uses a factory-tuned vented enclosure, a design that uses a port to support efficient low-frequency output. Cerwin-Vega rates the complete enclosure for 500 watts RMS and 2,000 watts maximum power handling. Its final wired impedance is 2 ohms, so amplifier compatibility should be confirmed before installation.\u003c\/p\u003e\u003cp\u003eEach subwoofer uses a polypropylene cone with a treated-foam surround, stamped-steel basket, ferrite magnet, and 2-inch voice coil. The stated frequency response is 20 Hz to 500 Hz. These material choices are paired with a 3\/4-inch MDF enclosure to provide a substantial platform for the loaded drivers.\u003c\/p\u003e\u003cp\u003eThe H6E10DV is a passive enclosure rather than a powered subwoofer, so it requires a separate external car amplifier and appropriate wiring. It can be used with an aftermarket receiver or a factory-audio integration setup that provides a suitable amplifier signal path. With its 30-inch length, check available cargo-area space before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Drivers:\u003c\/strong\u003e Two HED Series subwoofers are preinstalled in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports substantial continuous amplifier power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for an amplifier stable at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented MDF Enclosure:\u003c\/strong\u003e Factory-tuned ported construction supports efficient bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cones:\u003c\/strong\u003e Durable cone material paired with treated-foam surrounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grille:\u003c\/strong\u003e Includes a grille to help protect the subwoofer area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses 3\/4-inch medium-density fiberboard with a black carpet exterior. It has a rectangular form factor, factory-embroidered Cerwin-Vega Mobile branding, and a protective grille. The internal subwoofers use stamped-steel baskets and ferrite ceramic magnets.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in the vehicle cargo area so it cannot move during driving or high-output playback. Connect its single binding-post terminal to a compatible external amplifier, and verify that the amplifier is stable at the enclosure's 2-ohm final impedance. Measure the planned location against the 30-inch long by 13-inch high by 13-inch wide enclosure dimensions before installation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614397456454,"sku":"CER-H6E10DV","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UXcFiip7L.jpg?v=1784367567"},{"product_id":"cerwin-vega-h6e12sv-12-vented-subwoofer-enclosure","title":"Cerwin-Vega H6E12SV 12\" Vented Subwoofer Enclosure","description":"\u003cp\u003eThe Cerwin-Vega H6E12SV is a loaded, passive 12-inch subwoofer enclosure for adding low-frequency output to a car audio system. It combines one HED Series subwoofer with a factory-tuned vented cabinet, so the subwoofer and enclosure are already matched. Because it is passive, it requires an external amplifier.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to drivers who want a straightforward bass upgrade without selecting a separate raw subwoofer and building a custom box. Its 2-ohm final impedance and 250-watt RMS power handling make amplifier matching an important part of the installation. The vented design is intended to provide strong low-bass presence in a compact, ready-to-use format.\u003c\/p\u003e\u003cp\u003eThe installed subwoofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, and ferrite ceramic magnet. These materials support a durable mobile-audio driver design while the 2-inch voice coil handles the enclosure's rated power range. Cerwin-Vega lists a 20 Hz to 500 Hz frequency response for the loaded enclosure.\u003c\/p\u003e\u003cp\u003eThe cabinet is built from 3\/4-inch medium-density fiberboard and finished in black carpet. Its angled hatchback-style profile is designed for common trunk and cargo-area installations. The enclosure measures approximately 21 inches long by 15 inches wide by 14 inches high.\u003c\/p\u003e\u003cp\u003ePair the H6E12SV with a stable external amplifier that is appropriate for a 2-ohm load and rated near its 250-watt RMS handling. It can be used as the bass foundation of a factory-radio upgrade when the proper amplifier integration hardware is added. A compatible 12-inch HED mesh grille is available separately from Cerwin-Vega for added driver protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes one preinstalled HED Series subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Design:\u003c\/strong\u003e Lets you choose a compatible external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Handling:\u003c\/strong\u003e Supports properly matched amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for compatible 2-ohm amplifier operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Cabinet:\u003c\/strong\u003e Uses a ported enclosure alignment for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4-Inch MDF Construction:\u003c\/strong\u003e Provides a rigid enclosure structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H6E12SV uses a 3\/4-inch MDF vented enclosure with a black carpet exterior and an angled hatchback-style cabinet shape. The installed driver combines a polypropylene cone, treated-foam surround, stamped-steel basket, ferrite magnet, and 2-inch voice coil. Its single-voice-coil configuration presents a 2-ohm final load.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a trunk, hatch, or cargo area where its 21 x 15 x 14 inch dimensions will fit while leaving clearance for the port and wiring. Connect it to a properly installed external amplifier that is stable at 2 ohms, then set gain and low-pass filtering conservatively to match the system. The enclosure has one binding-post terminal connection; use appropriate speaker wire and follow amplifier and vehicle wiring safety practices.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614404141126,"sku":"CER-H6E12SV","price":229.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71yMKzB1XAL.jpg?v=1784367631"},{"product_id":"cerwin-vega-h7410-4x10-2-way-coaxial-speakers","title":"Cerwin-Vega H7410 4x10\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7410 is a pair of 4x10-inch, 2-way coaxial car speakers designed as a replacement for vehicles using this uncommon factory speaker size. It combines a woofer and tweeter in each speaker for full-range reproduction from a single mounting location. This makes it a practical upgrade for replacing worn or underperforming factory speakers without adding separate component tweeters.\u003c\/p\u003e\u003cp\u003eRated for 50 watts RMS and 320 watts maximum power handling, the H7410 is suited to systems built around a compatible factory radio or aftermarket amplification. Its 4-ohm nominal impedance matches the common load used by many car-audio speaker outputs. The 50 Hz to 20 kHz frequency-response specification supports bass, midrange, and treble reproduction within its intended full-range role.\u003c\/p\u003e\u003cp\u003eEach H7410 uses a 4x10-inch polypropylene cone with a treated-foam surround, backed by a ferrite ceramic magnet. The coaxial layout also incorporates a 1-inch balanced PEI black polypropylene dome tweeter for high-frequency detail. An internal crossover is included to direct the appropriate frequency ranges within the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe speaker is built around a stamped-steel vented frame and a graphite-injected reinforced spun cone design. A linear woven treated red spider supports cone movement, while the single 1-inch voice coil is specified for the speaker's power-handling range. These construction details focus on stable mounting and consistent operation in an automotive environment.\u003c\/p\u003e\u003cp\u003eThe H7410 is intended for direct replacement in compatible 4x10-inch locations, including applicable rear-deck and factory mounting positions. Its 9.4 x 3.8-inch mounting opening and 2.4-inch mounting depth should be checked against the vehicle before installation. It can serve as a straightforward factory-speaker replacement or as part of a broader head-unit, amplifier, and speaker upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4x10-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Separates high-frequency reproduction from the main cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Handling:\u003c\/strong\u003e Supports continuous power up to its rated level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches a common car-audio speaker load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7410 uses a stamped-steel vented basket, ferrite ceramic magnet, treated-foam surround, and polypropylene cone. Its listed construction also includes a graphite-injected reinforced spun cone, linear woven treated red spider, and 1-inch balanced PEI black polypropylene dome tweeter. No grille is specified for this model.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting opening, depth, mounting-hole pattern, and panel clearance before purchase; the listed mounting diameter is 9.4 x 3.8 inches and mounting depth is 2.4 inches. A secure, well-sealed mounting surface helps isolate the front and rear sound waves from the speaker. Use protected wiring when routing through metal panels, and match the amplifier or radio output to the speaker's 4-ohm impedance and 50-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614505033798,"sku":"CER-H7410","price":75.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61EqzRsEG_L.jpg?v=1784367676"},{"product_id":"cerwin-vega-h746-4x6-2-way-coaxial-car-speakers","title":"Cerwin-Vega H746 4\"x6\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H746 is a pair of 4\" x 6\" HED Series coaxial car speakers designed to replace factory speakers in compatible vehicle locations. Its compact format is suited to many door, dash, and rear-deck applications that use a 4\" x 6\" opening. The two-way design combines woofer and tweeter elements in each speaker for a straightforward full-range upgrade.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who want clearer everyday playback from a factory radio or a modest aftermarket system. With 40 watts RMS handling per speaker and a 4-ohm load, they can be matched with compatible head-unit power or an appropriately rated amplifier. Their 86 dB sensitivity specification provides a useful reference when comparing output requirements with other speakers.\u003c\/p\u003e\u003cp\u003eThe H746 uses a polypropylene cone with a treated-foam surround to handle midrange and lower-frequency duties. A 1-inch balanced-dome PEI tweeter is used for high-frequency reproduction. Together, the coaxial layout keeps the installation compact while covering the listed 60 Hz to 20 kHz frequency-response range.\u003c\/p\u003e\u003cp\u003eIts construction includes a stamped-steel basket and ferrite magnet motor structure. The speaker also uses a 1-inch voice coil and an internal crossover, so a separate external passive crossover is not required for its integrated tweeter. These details make the H746 a practical replacement-speaker design rather than a component-speaker system.\u003c\/p\u003e\u003cp\u003eThe H746 can be used as a direct-size replacement where vehicle fitment, mounting depth, and cutout dimensions are confirmed before installation. It is sold as a pair, providing left and right speakers for one 4\" x 6\" location pair. For a more extensive audio upgrade, it can be paired with compatible wiring, mounting hardware, sound treatment, and amplification selected for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4\" x 6\" Size:\u003c\/strong\u003e Fits applications designed for this compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports continuous power handling for compatible systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for everyday playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies between the integrated drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H746 uses a polypropylene cone, treated-foam surround, Mylar diaphragm material, stamped-steel basket, and ferrite ceramic magnet. Its integrated 1-inch PEI balanced-dome tweeter and internal crossover keep the speaker assembly self-contained. The construction is designed for standard in-vehicle speaker replacement use.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 4\" x 6\" speakers and verify the 5.6\" x 3.5\" mounting cutout and 1.8\" mounting-depth requirements before purchase. Connect each speaker to a compatible 4-ohm channel and use secure mounting hardware and correct-polarity wiring. Factory-grille clearance, adapter brackets, wiring harnesses, and installation accessories should be checked for the specific vehicle because they are not confirmed as included.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614614872134,"sku":"CER-H746","price":69.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61bcfLYtHIL.jpg?v=1784367722"},{"product_id":"cerwin-vega-h752-5-25-2-way-coaxial-car-speakers","title":"Cerwin-Vega H752 5.25\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H752 is a 5.25-inch, 2-way coaxial speaker set designed to replace factory car speakers in compatible door, dash, or rear-deck locations. It combines a woofer and tweeter in each speaker, helping simplify an audio upgrade where separate component speakers are not required. With a 4-ohm nominal impedance, the set is suited to common car-audio speaker applications.\u003c\/p\u003e\u003cp\u003eThis HED Series model is intended for listeners who want clearer everyday playback from a compact speaker size. Its 60 Hz to 20 kHz frequency response covers bass and midrange fundamentals along with high-frequency detail. The 1-inch balanced dome tweeter is integrated into the coaxial design to reproduce upper-frequency content from the same mounting location.\u003c\/p\u003e\u003cp\u003eThe H752 is rated for 40 watts RMS and 275 watts maximum power handling per speaker. That rating makes it appropriate for use with a compatible factory head unit or an aftermarket amplifier matched to its continuous power capability. For amplifier installations, proper gain setting is important to avoid clipping and speaker damage.\u003c\/p\u003e\u003cp\u003eIts polypropylene cone, treated foam surround, and ferrite magnet motor are paired with a stamped-steel basket. These materials support a practical replacement-speaker design while the internal crossover directs frequencies within the coaxial assembly. The speaker also uses a 1-inch voice coil and a Mylar diaphragm material.\u003c\/p\u003e\u003cp\u003eWith a 1.85-inch mounting depth and 4.4-inch mounting diameter, the H752 can fit many 5.25-inch speaker locations when vehicle-specific clearance is confirmed. It is supplied as a pair, allowing both speakers in a matched location to be upgraded together. Verify the factory opening, mounting depth, adapter requirements, and connector style before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.25-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Configuration:\u003c\/strong\u003e Supports full-range playback from a compact speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Rating:\u003c\/strong\u003e Provides a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Forms the woofer’s main sound-producing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Integrates frequency division within the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H752 uses a polypropylene cone with a treated foam surround, Mylar diaphragm material, ferrite magnet, and stamped-steel basket. A 1-inch balanced PEI dome tweeter is mounted within the coaxial assembly. The speaker is specified with a single voice coil and an internal crossover.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 5.25-inch speaker with a 4.4-inch mounting diameter and 1.85-inch mounting depth before purchase. Use appropriate vehicle-specific speaker adapters or wiring harnesses when the factory mounting pattern or connector differs. The speakers are 4-ohm units and should be connected with correct polarity to a compatible head unit or amplifier.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614680768582,"sku":"CER-H752","price":75.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/612spbCQT9L.jpg?v=1784367766"},{"product_id":"cerwin-vega-h7652-6-5-2-way-coaxial-car-speakers","title":"Cerwin-Vega H7652 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7652 is a pair of 6.5-inch HED Series 2-way coaxial car speakers designed for replacing compatible factory door or rear-deck speakers. Its coaxial layout places a tweeter over the woofer, allowing both drivers to fit within a single speaker location. The result is a straightforward full-range speaker upgrade for vehicles with suitable mounting space.\u003c\/p\u003e\u003cp\u003eEach H7652 speaker is rated for 60 watts RMS and 320 watts maximum power handling. The pair is rated for 120 watts RMS and 640 watts maximum power handling. Its 4-ohm nominal impedance is suited to common vehicle audio systems and compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and treated foam surround form the low- and mid-frequency section of the speaker. The centrally mounted 1-inch balanced PEI dome tweeter is intended to handle high-frequency detail within the same assembly. This 2-way arrangement keeps vocals, instruments, and high-frequency content together in one compact replacement speaker.\u003c\/p\u003e\u003cp\u003eThe H7652 uses a stamped-steel basket and ferrite magnet motor structure. It also has a 1-inch high-temperature voice coil and an internal crossover. These elements support a conventional coaxial-speaker design without requiring a separate external passive crossover.\u003c\/p\u003e\u003cp\u003eWith a 5.7-inch mounting cutout requirement and approximately 2.24 inches of mounting depth, the H7652 is intended for many 6.5-inch speaker locations. It can be used in doors or rear decks when the vehicle provides adequate clearance. Confirm mounting depth, cutout diameter, screw pattern, and grille clearance before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Driver System:\u003c\/strong\u003e Uses dedicated woofer and tweeter sections for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Per Speaker:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio speaker output configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7652 combines a polypropylene cone, treated foam surround, mylar diaphragm material, ferrite magnet, and stamped-steel basket. A balanced PEI dome tweeter is mounted concentrically with the woofer. Speaker grilles are included for installations where grille protection is needed.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 5.7-inch cutout and approximately 2.24 inches of top-mount depth before installation. Mount the speaker securely to a flat baffle and seal around the frame to reduce air leaks. When routing replacement wire through metal panels, use grommets and observe correct positive and negative polarity.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614754496582,"sku":"CER-H7652","price":75.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61OXfm3QZOL.jpg?v=1784367807"},{"product_id":"cerwin-vega-h7653-6-5-3-way-coaxial-speakers","title":"Cerwin-Vega H7653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7653 is a 6.5-inch, 3-way coaxial speaker set designed to replace compatible factory door or rear-deck speakers. Its all-in-one coaxial layout combines low-, mid-, and high-frequency drivers in each speaker, helping simplify an audio-system upgrade. It is intended for listeners seeking clearer, fuller sound from a standard 4-ohm car-audio speaker position.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS power handling and 340 watts maximum power handling, the H7653 is suited to appropriately matched factory radios or aftermarket amplification. Its 50 Hz to 20 kHz stated frequency response covers bass, vocal, and treble ranges within a compact speaker format. The 3-way arrangement is designed to add midrange detail and high-frequency definition beyond a basic single-cone factory speaker.\u003c\/p\u003e\u003cp\u003eThe H7653 uses a single 4-ohm voice coil, making it compatible with many conventional car-audio speaker outputs. An internal crossover is included to direct frequencies among the speaker's integrated drivers. This avoids the need to add a separate external crossover for the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eIts construction includes a stamped-steel basket and ferrite ceramic magnet, with a polypropylene cone, treated-foam surround, and Mylar diaphragm listed in the manufacturer specifications. Other published product information identifies a treated red spider and a balanced PEI\/polypropylene dome tweeter. Together, these elements support a durable replacement-speaker design for everyday vehicle use.\u003c\/p\u003e\u003cp\u003eThe H7653 can be considered for vehicles with 6.5-inch speaker locations when the mounting cutout and behind-panel clearance are confirmed first. It works as a practical front-door or rear-deck upgrade and can be paired with an aftermarket head unit or amplifier matched to its 4-ohm load and RMS rating. For systems needing deeper low bass, a separate subwoofer remains the appropriate addition.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports amplifier or radio power matched to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Load:\u003c\/strong\u003e Works with many standard car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Routes frequencies between the integrated speaker drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Fitment:\u003c\/strong\u003e Designed for compatible 6.5-inch door or rear-deck locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7653 uses a stamped-steel basket, ferrite ceramic magnet, polypropylene cone, treated-foam surround, and 1-inch voice coil. Its coaxial format places the additional midrange and high-frequency drivers over the main woofer, conserving space compared with a separate component-speaker layout. The speaker includes an internal crossover and uses a single 4-ohm voice coil.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's opening and clearance with the listed 5.7-inch (145 mm) mounting diameter and approximately 2.09-inch (53 mm) mounting depth. Mount the speaker securely to a flat baffle and seal around its frame to limit air leaks; check door-window travel before installation in a door. Use correct polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614853488710,"sku":"CER-H7653","price":88.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JI4nW0_8L.jpg?v=1784367856"},{"product_id":"cerwin-vega-h765c-6-5-2-way-component-speakers","title":"Cerwin-Vega H765C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe Cerwin-Vega H765C is a 6.5-inch, 2-way component speaker system designed to replace factory door or custom-location speakers. Its separate woofers and tweeters allow more flexible placement than a coaxial speaker, helping installers position high frequencies closer to the listener. It is intended for vehicle owners seeking a more detailed front-stage upgrade while retaining a conventional 4-ohm speaker load.\u003c\/p\u003e\u003cp\u003eEach side of the system combines a polypropylene woofer with a 1-inch PEI balanced-dome tweeter. This component layout separates midrange and high-frequency reproduction into dedicated drivers for clearer placement and tuning options. The published frequency response is 50 Hz to 20 kHz, covering the primary range used for music playback in a vehicle system.\u003c\/p\u003e\u003cp\u003eThe H765C is rated for 60 watts RMS and 400 watts maximum power handling per side. That makes it suitable for use with compatible factory-powered systems as well as aftermarket amplification matched appropriately to its 4-ohm impedance and RMS rating. Sensitivity is rated at 84.5 dB at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eIts woofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, and ferrite magnet structure. The dedicated tweeter uses a PEI diaphragm and neodymium magnet. These materials support a practical replacement-speaker design focused on stable mounting and separate high-frequency placement.\u003c\/p\u003e\u003cp\u003eExternal crossover networks are included to divide the signal between the woofers and tweeters. The set can serve as a front-speaker upgrade in doors, kick panels, or custom installations where the published mounting dimensions are suitable. It can also be paired with a compatible rear-speaker upgrade, amplifier, and subwoofer system as part of a broader car-audio build.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component Set:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Dedicated drivers handle midrange and high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports power-matched factory or aftermarket system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Provide a durable cone material for vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeters:\u003c\/strong\u003e Deliver dedicated high-frequency output through separate tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to each driver in the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H765C uses stamped-steel woofer baskets, polypropylene cones, treated-foam surrounds, ferrite woofer magnets, and neodymium tweeter magnets. Each woofer has a 1-inch voice coil, while the tweeters use PEI balanced-dome diaphragms. Grilles are included for installations where speaker protection or a finished appearance is needed.\u003c\/p\u003e\u003cp\u003eVerify vehicle fitment before purchase using the 5.7-inch mounting cutout requirement and published 2.45-inch mounting depth. The package includes two woofers, two tweeters, two external crossover networks, tweeter flush mounts, tweeter surface mounts, connection cables, and mounting hardware. For amplified use, select an amplifier and wiring configuration compatible with the system's 4-ohm impedance and 60-watt RMS-per-side rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614944845894,"sku":"CER-H765C","price":151.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91aPBrEKU0L.jpg?v=1784367897"},{"product_id":"cerwin-vega-h7693-6x9-3-way-coaxial-speakers","title":"Cerwin-Vega H7693 6x9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7693 is a pair of 6x9-inch HED Series 3-way coaxial car speakers designed to replace factory speakers in compatible vehicle locations. They provide a full-range upgrade in a single speaker assembly, helping simplify installations where separate component speakers are not required. The pair is suited to rear decks, doors, and custom panels when the vehicle has adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eIts 3-way coaxial layout combines woofer, midrange, and high-frequency drivers in each speaker. This arrangement is intended to cover bass, vocal, and treble ranges from one mounting location. With a 50 Hz to 20 kHz frequency-response rating, the H7693 is designed for broad everyday music playback.\u003c\/p\u003e\u003cp\u003eThe H7693 is rated for 70 watts RMS and 420 watts maximum power handling per speaker. Its 4-ohm single-voice-coil design is compatible with many factory and aftermarket car-audio systems. An amplifier should be selected and configured with its continuous RMS output and impedance compatibility in mind.\u003c\/p\u003e\u003cp\u003eConstruction includes a polypropylene cone, treated-foam surround, ferrite magnet, and stamped-steel basket. Cerwin-Vega specifies a Mylar diaphragm and a PEI black polypropylene dome tweeter for high-frequency reproduction. An internal crossover is included to divide the signal among the coaxial drivers.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the H7693 can be used as a direct full-range speaker replacement or paired with an appropriately matched aftermarket amplifier. Its 86.5 dB sensitivity rating and 4-ohm impedance should be considered when planning output levels and amplifier power. Verify vehicle-specific fitment, mounting-hole dimensions, and panel clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible rear-deck, door, and custom-panel locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and high-frequency drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Rating:\u003c\/strong\u003e Supports appropriately matched continuous amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Divides frequencies within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable woofer cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Supports stable mounting and speaker structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7693 uses a stamped-steel basket with a ferrite ceramic magnet, polypropylene cone, treated-foam surround, and single 1-inch voice coil. Its coaxial architecture keeps the drivers together in one assembly, while the internal crossover is built into the speaker. Cerwin-Vega specifies a 3-way configuration with a Mylar diaphragm and PEI black polypropylene dome tweeter.\u003c\/p\u003e\u003cp\u003eConfirm that the intended location accepts a 6x9-inch speaker and accommodates the 3.3-inch mounting depth before purchase. The specified mounting opening is 7.71 x 6.4 inches, so vehicle-specific brackets, adapters, or wiring connections may be needed depending on the application. Use correct polarity and match the speakers with a compatible 4-ohm factory radio or amplifier.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615613182022,"sku":"CER-H7693","price":96.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ep53CRjtL.jpg?v=1784368238"},{"product_id":"cerwin-vega-h7694-6x9-4-way-coaxial-car-speakers","title":"Cerwin-Vega H7694 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7694 is a pair of 6x9-inch HED Series 4-way coaxial car speakers designed as a full-range replacement for factory-installed speakers. They provide an all-in-one speaker solution for vehicles with compatible 6x9 mounting locations. The coaxial layout places multiple drivers in each speaker assembly, helping simplify an audio upgrade without separate external tweeter mounting.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want stronger, more detailed sound from a factory or aftermarket stereo system. With 75 watts RMS power handling per speaker and a 4-ohm nominal impedance, the H7694 can be used with compatible head-unit power or an appropriately matched external amplifier. Their 86.5 dB sensitivity specification and 50 Hz to 20 kHz frequency response support broad full-range reproduction.\u003c\/p\u003e\u003cp\u003eThe H7694 uses a 4-way coaxial design to combine low-, mid-, and high-frequency output from a compact 6x9-inch footprint. A 1-inch balanced-dome PEI tweeter is incorporated into the speaker assembly for high-frequency reproduction. This makes the pair a practical choice for rear-deck, door, or custom-panel speaker locations that accept the required dimensions.\u003c\/p\u003e\u003cp\u003eIts construction combines a polypropylene cone, treated-foam surround, Mylar diaphragm, ferrite magnet structure, and stamped-steel basket. The stamped-steel frame provides a rigid mounting foundation, while the internal crossover is built into the speaker design. These materials are selected for conventional automotive speaker installation and daily music playback.\u003c\/p\u003e\u003cp\u003eThe H7694 can serve as a direct speaker upgrade in a stock system or as part of a larger car-audio build with an aftermarket amplifier. Verify the vehicle's available mounting depth, cutout dimensions, mounting-hole layout, and window or trunk clearance before installation. For amplified systems, match amplifier output conservatively to the speaker's 75-watt RMS rating per speaker rather than selecting equipment solely by maximum-power figures.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Integrates multiple driver elements into each 6x9-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Supports amplifier matching at 75 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many conventional car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Creates a solid structure for mounting the speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Built-in crossover supports the coaxial driver arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7694 uses a stamped-steel basket, ferrite ceramic magnet, polypropylene cone, treated-foam surround, and Mylar diaphragm. Its 1-inch voice coil and single-voice-coil configuration are paired with a 1-inch PEI balanced-dome tweeter. Speaker grilles are included with the pair.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle can accept a 6x9-inch speaker, the 7.71 x 6.4-inch mounting cutout, and approximately 3.3 inches of mounting depth before purchase. Mount the speakers securely on a flat surface and seal the frame area to reduce air leaks; when wiring through metal, use suitable protection such as grommets. Maintain correct positive and negative polarity at both speakers, and check clearance for windows, trunk hardware, and interior panels before final assembly.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615631532102,"sku":"CER-H7694","price":107.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51dFOXKUIHL.jpg?v=1784368303"},{"product_id":"cerwin-vega-cer-hs10dv4-10-shallow-dvc-subwoofer","title":"Cerwin Vega CER-HS10DV4 10\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CER-HS10DV4 is a 10-inch shallow-mount car subwoofer designed to add low-frequency output where installation depth is limited. Its compact profile makes it suitable for shallow truck boxes, under-seat enclosures, and space-conscious trunk installations. Dual 4-ohm voice coils provide wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eThis HED Slim Series subwoofer is intended for listeners who want a dedicated bass upgrade without committing to a deep enclosure. Its 350-watt RMS power rating supports use in a properly matched amplified subwoofer system. The 10-inch format balances compact enclosure compatibility with meaningful bass reinforcement.\u003c\/p\u003e\u003cp\u003eThe CER-HS10DV4 uses a hybrid polypropylene and treated-paper cone structure to support controlled cone movement. Its treated foam surround is designed to allow excursion while supporting the cone assembly. With an 8 mm Xmax specification, it is engineered for low-frequency duty rather than full-range speaker use.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure and stamped-steel basket provide the foundation for the driver assembly. The 2.5-inch voice coils are configured as a dual-voice-coil design, enabling series or parallel wiring options. This makes the subwoofer adaptable to amplifiers designed for either a 2-ohm or 8-ohm final load from one driver.\u003c\/p\u003e\u003cp\u003eThe CER-HS10DV4 can be incorporated into sealed or ported custom enclosures, depending on the system goal and enclosure design. Its 3.74-inch mounting depth helps address installations with limited clearance behind the mounting surface. Pair it with a compatible mono or multi-channel amplifier used within the subwoofer's RMS power capability.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount 10-Inch Design:\u003c\/strong\u003e Fits installations where conventional subwoofer depth is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports flexible series or parallel amplifier wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Accommodates a properly matched amplified bass system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Combines polypropylene and treated paper in the cone assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Foam Surround:\u003c\/strong\u003e Supports cone travel for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Structure:\u003c\/strong\u003e Provides magnetic control for the moving assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe subwoofer uses a stamped-steel basket, ferrite magnet structure, treated foam surround, and 2.5-inch voice coils. Its round 10-inch driver format has a 10.35-inch overall diameter and a 4.33-inch overall height. The shallow 3.74-inch mounting depth is intended to simplify fitment in compact enclosure designs.\u003c\/p\u003e\u003cp\u003eConfirm the enclosure's mounting cutout and rear clearance before installation, and use an enclosure designed for a 10-inch shallow subwoofer. The dual 4-ohm coils may be wired in parallel for a 2-ohm final load or in series for an 8-ohm final load; amplifier stability must match the selected load. Use a compatible amplifier and set gain conservatively to keep operation aligned with the 350-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615681437766,"sku":"CER-HS10DV4","price":176.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61K_MYTfzdL.jpg?v=1784368342"},{"product_id":"cerwin-vega-hs12dv2-12-shallow-dual-2-ohm-subwoofer","title":"Cerwin-Vega HS12DV2 12\" Shallow Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega HS12DV2 is a 12-inch shallow-mount car subwoofer designed to add low-frequency output where installation depth is limited. Its slim 4.25-inch mounting depth helps it fit applications that cannot accommodate a conventional full-depth woofer. It is intended for vehicle audio systems using an external subwoofer amplifier and enclosure.\u003c\/p\u003e\u003cp\u003eThis HED Slim Series model uses dual 2-ohm voice coils, giving installers useful impedance choices when matching a compatible amplifier. One HS12DV2 can be wired to a 1-ohm load in parallel or a 4-ohm load in series. Both voice coils should be connected to an amplification source for proper operation.\u003c\/p\u003e\u003cp\u003eWith a 400-watt RMS power rating and 1,200-watt maximum rating, the HS12DV2 is suited to systems built around clean, appropriately matched amplifier power. Its 84 dB sensitivity and 31 Hz free-air resonance support substantial bass extension in a properly designed enclosure. The long-excursion design provides 8 mm of Xmax.\u003c\/p\u003e\u003cp\u003eThe subwoofer combines a polypropylene-based hybrid cone design with a treated foam surround to support controlled cone movement. A ferrite motor structure and 2.5-inch voice coil provide the foundation for its shallow-profile design. The stamped-steel basket provides a stable mounting platform.\u003c\/p\u003e\u003cp\u003eThe HS12DV2 can be used in either sealed or ported enclosures depending on the desired system character and available space. Cerwin-Vega documentation lists a 1.25 cubic foot sealed enclosure and a 1.75 cubic foot ported enclosure as recommended starting points. It is a practical upgrade for trucks, coupes, sedans, and other vehicles where bass is wanted without sacrificing excessive cargo space.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount 12-Inch Design:\u003c\/strong\u003e Uses a 4.25-inch mounting depth for installations with limited clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring with one subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W RMS Power Handling:\u003c\/strong\u003e Matches with an amplifier that delivers clean power within its rated range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Combines polypropylene and treated-paper design elements for responsive bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 mm Xmax:\u003c\/strong\u003e Provides long-excursion capability for low-frequency output in a slim format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Ported Compatibility:\u003c\/strong\u003e Lets installers tailor the enclosure to space and bass-response goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HS12DV2 uses a polypropylene cone material, treated foam surround, stamped-steel basket, and ferrite ceramic magnet structure. Its 2.5-inch voice coil is specified with dual 2-ohm windings, while the shallow frame measures 12.56 inches overall in diameter. The listed overall height is 4.84 inches.\u003c\/p\u003e\u003cp\u003eAllow for the 11.18-inch cutout diameter and 4.25-inch mounting depth when planning the enclosure. A 1.25 cubic foot sealed box is the recommended reference enclosure for compact, controlled bass, while the recommended ported volume is 1.75 cubic feet. For ported systems, Cerwin-Vega documentation recommends a subsonic filter set to at least 30 Hz; confirm the amplifier is stable at the final wired impedance before installation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615798550598,"sku":"CER-HS12DV2","price":207.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61K_MYTfzdL_3afc069b-9ce2-44c2-a8bf-f7817ac134a0.jpg?v=1784368387"},{"product_id":"cerwin-vega-s9500-2d-stroker-2-channel-class-d-amplifier","title":"Cerwin-Vega S9500.2D Stroker 2-Channel Class-D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega S9500.2D is a two-channel, full-range Class-D car amplifier designed to add dedicated power to a pair of speakers or a compatible bridged subwoofer setup. It provides 200 watts RMS per channel at 4 ohms and 250 watts RMS per channel at 2 ohms. This makes it a practical choice for upgrading factory-powered speakers or building a compact amplified system.\u003c\/p\u003e\u003cp\u003eIts two-channel layout supports stereo speaker systems, including component sets and coaxial speakers, while its bridged mode can power one 4-ohm subwoofer. The amplifier is stable to 2 ohms per channel in stereo operation. Variable high-pass and low-pass filters help tailor the output for speakers or bass-focused applications.\u003c\/p\u003e\u003cp\u003eThe S9500.2D uses a full-range Class-D topology with a full PWM power supply. This design is intended to provide efficient power delivery in a compact chassis while helping manage heat during normal operation. Its published bandwidth extends from 10 Hz to 35 kHz, allowing use in full-range system designs.\u003c\/p\u003e\u003cp\u003eFor signal integration, the amplifier supports low-level RCA input and high-level input capability. It also provides REM, DC-offset, and VOX signal-sensing turn-on options, which can simplify installation with a variety of source units. A pass-through RCA output is available for sending signal to an additional amplifier.\u003c\/p\u003e\u003cp\u003eThe amplifier includes a wired bass-level control and an illuminated Cerwin-Vega logo. Its compact 11.81-inch-long chassis is suited to installations where available mounting space matters. Use it as a dedicated stereo amplifier, or bridge its channels for a single 4-ohm woofer in a properly matched system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class-D Design:\u003c\/strong\u003e Powers a stereo speaker pair or a bridged 4-ohm subwoofer configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Per Channel:\u003c\/strong\u003e Delivers rated stereo output at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 35 Hz to 350 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Turn-On Modes:\u003c\/strong\u003e Supports REM, DC-offset, and VOX signal-sensing activation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Helps integrate the amplifier with aftermarket or compatible factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass-Level Control:\u003c\/strong\u003e Lets the user adjust bass output level from the listening position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe S9500.2D uses a compact full-range Class-D platform with a 4-layer PCB and surface-mount component construction. Its chassis includes an illuminated Cerwin-Vega logo, onboard crossover controls, input-level selection, and power\/protection status indication. The published dimensions are 11.81 x 7.25 x 2.0 inches.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure, dry surface with airflow around the chassis, away from direct heat and moisture. The manual specifies a minimum 8 AWG power and ground connection, with terminals accepting up to 4 AWG wire; use a 50A battery-side fuse and keep speaker loads at or above 2 ohms stereo or 4 ohms bridged. Set the crossover mode, input level, gain, and turn-on method to match the connected source unit and speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615937978438,"sku":"CER-S91100-5D","price":857.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71gBDXdqfhL.jpg?v=1784368451"},{"product_id":"cerwin-vega-s91100-5d-5-channel-class-d-amplifier","title":"Cerwin Vega S91100.5D 5-Channel Class-D Amplifier","description":"\u003cp\u003eThe Cerwin Vega S91100.5D is a Stroker Series five-channel full-range Class-D car amplifier designed to power a complete speaker-and-subwoofer system from one chassis. It provides dedicated amplification for front and rear speakers along with a low-frequency channel for a subwoofer. This makes it a practical option for vehicle audio upgrades that need both cabin sound and bass without adding separate amplifiers.\u003c\/p\u003e\u003cp\u003eFor full-range channels, the S91100.5D is rated at 90 watts RMS x 4 at 4 ohms or 150 watts RMS x 4 at 2 ohms. Its subwoofer section is rated at 150 watts RMS x 2 at 4 ohms or 250 watts RMS x 1 at 2 ohms. The front or rear full-range channels can also be bridged to provide 300 watts RMS x 2 at 4 ohms, while the subwoofer channels can be bridged for 500 watts RMS x 1 at 4 ohms.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a full PWM power supply and full-range Class-D topology to combine multi-channel output with a compact 2-inch-tall chassis. It has a 10.0 to 17.0 VDC operating threshold and an idle-current specification of 0.7A. Its measured specification set includes 0.03% THD at 1 kHz and 4 ohms, plus an A-weighted signal-to-noise ratio of -96.7 dBA at full power.\u003c\/p\u003e\u003cp\u003eSystem tuning is supported by selectable full-range, high-pass, and low-pass crossover modes for channels 1 through 4. Variable high-pass and low-pass crossover adjustments cover 35 Hz to 350 Hz at 12 dB per octave. A variable bass boost and phase control allow the low-frequency output to be adjusted for the subwoofer installation and listening preferences.\u003c\/p\u003e\u003cp\u003eThe S91100.5D works with aftermarket head units through RCA connections and can also accept speaker-level input for many factory-radio integrations. Its input configuration can accept two-, four-, or five-channel input arrangements, and selectable REM, DC-offset, and VOX turn-on modes add installation flexibility. A wired bass remote is included for convenient subwoofer-level adjustment from the cabin.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel System Power:\u003c\/strong\u003e Runs front, rear, and subwoofer channels from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Range Class-D Topology:\u003c\/strong\u003e Delivers efficient multi-channel amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Stability:\u003c\/strong\u003e Supports compatible stereo speaker loads down to 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Channel Capability:\u003c\/strong\u003e Allows higher-power configurations with 4-ohm bridged loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Signal Integration:\u003c\/strong\u003e Accepts RCA or speaker-level input signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Enables convenient adjustment of subwoofer output level.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier has a black Stroker Series enclosure with a top-mounted illuminated logo, top-access controls, and status\/protection indication. Its full PWM supply, 4-layer PCB construction, and compact layout are intended for vehicle audio installations where space and heat management matter. The chassis measures 14.1 x 7.25 x 2.0 inches.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely to a solid vehicle panel or amplifier rack, with adequate ventilation and access to its controls and connections. Use a properly fused power lead within 18 inches of the battery, match the ground-wire gauge to the power wire, and keep signal cables separated from power wiring where possible. The amplifier accepts up to 4 AWG power and ground cable, while the manufacturer manual specifies a minimum of 8 AWG and lists a 90A battery fuse rating for this model.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45616069705798,"sku":"CER-S9750-1D","price":564.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51dhARrQlnL.jpg?v=1784368513"}],"url":"https:\/\/audiowatt.store\/collections\/cerwin-vega.oembed?page=4","provider":"Audio Watt Store","version":"1.0","type":"link"}