{"title":"Black Friday Picks","description":null,"products":[{"product_id":"audio360-ad7500bmx-digital-bass-processor","title":"Audio360 AD7500BMX Digital Bass Processor","description":"\u003cp\u003eThe Audio360 AD7500BMX is a digital bass processor designed to restore and shape low-frequency information in a car audio signal. It is intended for systems where recorded bass sounds reduced or lacks the desired weight after passing through the source unit and signal chain. Installed ahead of an amplifier or crossover, it provides a dedicated stage for bass enhancement without replacing the head unit.\u003c\/p\u003e\u003cp\u003eThis processor is suited to listeners building or upgrading a subwoofer-equipped vehicle audio system with RCA signal connections. Its bass-restoration circuit is designed to recreate low-frequency content and blend it back into the program material. The result is adjustable bass emphasis that can be tailored to the vehicle, music source, and subwoofer system.\u003c\/p\u003e\u003cp\u003eThe AD7500BMX provides two main tuning controls: SWEEP selects the bass center-frequency range from 27 Hz to 63 Hz, while WIDE adjusts the affected frequency range. These controls let the installer focus the processing on a lower or higher bass region and choose a narrower or broader effect. A dash-mount remote gives the driver convenient access to bass-level adjustment after the system has been tuned.\u003c\/p\u003e\u003cp\u003eFor signal integration, the processor uses balanced RCA inputs rated for signals up to 15 V RMS. Its published 10 Hz to 35 kHz frequency response, 133 dB signal-to-noise ratio, and 0.0025% total harmonic distortion support use in systems where low noise and clean signal transfer are important. RCA outputs are rated at up to 13.2 V peak for connection to compatible downstream equipment.\u003c\/p\u003e\u003cp\u003eThe AD7500BMX operates from a 12 V DC vehicle electrical system and has a stated 150 mA current draw. A PFM subsonic-filter switch is included to reduce very low frequencies that may consume amplifier power without contributing useful audible output. It is a signal processor rather than a power amplifier, so it is used with compatible amplification and speakers or subwoofers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital Bass Restoration:\u003c\/strong\u003e Reintroduces low-frequency content into the audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSWEEP Control:\u003c\/strong\u003e Selects a bass center frequency from 27 Hz to 63 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWIDE Control:\u003c\/strong\u003e Adjusts how broadly the bass processing affects adjacent frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced RCA Inputs:\u003c\/strong\u003e Accepts up to 15 V RMS signals with noise rejection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides driver-accessible bass-level adjustment and an LED indicator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePFM Filter Switch:\u003c\/strong\u003e Reduces subsonic frequencies that can consume amplifier power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD7500BMX is an in-vehicle electronic signal processor with RCA input and output connections, front-panel tuning controls, and a separate dash-mount remote. Published product information identifies the remote LED indicator and the SWEEP, WIDE, and bass-level adjustment functions. Specific enclosure materials, dimensions, and mounting-hole measurements have not been confirmed.\u003c\/p\u003e\u003cp\u003eInstall the processor in the low-level signal path before compatible crossovers or amplifiers, using RCA interconnects between the source signal and downstream equipment. Connect it to a 12 V DC vehicle supply and mount the included remote where its bass-level control can be reached safely from the driver's seat. Tune SWEEP and WIDE after the rest of the system is set, and use the PFM filter when very low-frequency energy is not appropriate for the enclosure or amplifier setup.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614096744518,"sku":"AD7500BMX","price":52.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71bMz6dwFXL.jpg?v=1784358399"},{"product_id":"cerwin-vega-v80c-8-2-way-component-speaker-system","title":"Cerwin-Vega V80C 8\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Cerwin-Vega V80C is an 8-inch, 2-way component speaker system for upgrading a vehicle's factory speakers with separately mounted woofers and tweeters. It is designed for installations where an 8-inch speaker position is available and better component placement is desired. The set includes crossover networks to divide the audio signal between the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThis system is intended for car, truck, SUV, and van audio upgrades that have sufficient mounting room for the 8-inch woofers. Its 4-ohm nominal impedance is suited to compatible aftermarket amplification or speaker outputs. Separate 1-inch tweeters allow installers to position high frequencies independently from the woofers.\u003c\/p\u003e\u003cp\u003eThe V80C is rated for 180 watts RMS and 540 watts maximum per side, with 360 watts RMS and 1,080 watts maximum for the complete set. Its specified frequency response is 91 Hz to 20 kHz, with 90 dB sensitivity measured at 1 watt\/1 meter. This makes it a component option for systems that prioritize midrange coverage and dedicated high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eEach woofer uses a hybrid carbon fiber\/polypropylene cone and Santoprene rubber surround. The 1-inch dynamically balanced silk dome tweeter uses a neodymium magnet, while the woofer uses a strontium ferrite magnet. A powder-coated stamped-steel basket provides the woofer's mounting structure.\u003c\/p\u003e\u003cp\u003eThe V80C is supplied as a stereo component set with two woofers, two tweeters, and two crossover networks. It can be used as a front-stage or rear-stage upgrade where custom tweeter placement is practical. Confirm the vehicle's available depth, cutout, panel clearance, and wiring path before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Component System:\u003c\/strong\u003e Separates the woofer and tweeter for flexible installation placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180W RMS Per Side:\u003c\/strong\u003e Handles substantial continuous power with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Woofer Cone:\u003c\/strong\u003e Carbon fiber\/polypropylene construction supports bass and midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surround:\u003c\/strong\u003e Supports woofer excursion with a durable surround material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome Tweeter:\u003c\/strong\u003e Dynamically balanced design handles the system's high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected Crossover Networks:\u003c\/strong\u003e Divide frequencies between drivers and include tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V80C combines hybrid carbon fiber\/polypropylene woofer cones, Santoprene rubber surrounds, strontium ferrite woofer magnets, and neodymium tweeter magnets. Its 8-inch woofers use powder-coated, rigid stamped-steel baskets. The set does not include speaker grilles.\u003c\/p\u003e\u003cp\u003eVerify the 7.01-inch cutout requirement, 2.60-inch mounting depth, and 8.25 x 7.76-inch overall woofer dimensions against the intended mounting location. The included tweeters support flush or surface mounting, and each side should be wired through its supplied crossover network. Use grommets when passing wiring through metal and ensure the speaker frame is securely sealed to its mounting surface.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45618722832454,"sku":"CER-V80C","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/41PkZHI4YPL.jpg?v=1784370043"},{"product_id":"cerwin-vega-xed8001d-1100w-class-d-mono-amplifier","title":"Cerwin Vega XED8001D 1100W Class-D Mono Amplifier","description":"\u003cp\u003eThe Cerwin Vega XED8001D is a compact mono Class-D amplifier designed to add dedicated subwoofer power to a car audio system. It delivers 450 watts RMS into 4 ohms or 800 watts RMS into 2 ohms from a single channel. This makes it a practical choice for systems built around one subwoofer or a compatible two-subwoofer load.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners who want stronger low-frequency output without adding a large multi-channel amplifier. Its mono configuration concentrates its output on bass reproduction, while the variable low-pass and subsonic filters help tailor the amplifier to the installed subwoofer system. A wired remote level control provides an accessible way to adjust bass level from the front of the vehicle.\u003c\/p\u003e\u003cp\u003eClass-D topology and a full PWM power supply support efficient operation in a compact chassis. The XED8001D is rated for a 10.0 to 16.0 VDC supply range and has an idle-current specification of 0.7A. Its 2-ohm output impedance rating allows it to support properly wired 2-ohm subwoofer loads.\u003c\/p\u003e\u003cp\u003eInput flexibility helps the amplifier work with a range of source units. It provides RCA input connections as well as a high-level input, with separate low- and high-level input sensitivity ranges. Input gain adjustment, a crossover selection switch, and Vega Bass Boost give installers useful controls for integrating the amp into an existing system.\u003c\/p\u003e\u003cp\u003eThe XED8001D fits naturally into a staged audio upgrade where a head unit and full-range speakers are already in place and dedicated bass power is needed. Its 8.7-inch length can simplify placement in installations with limited mounting room. Use it with a subwoofer configuration that presents no lower than its rated 2-ohm load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS at 2 Ohms:\u003c\/strong\u003e Supplies substantial single-channel power for a correctly matched subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-D Topology:\u003c\/strong\u003e Provides efficient mono amplification in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Filter:\u003c\/strong\u003e Adjusts the upper bass cutoff from 35Hz to 250Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Subsonic Filter:\u003c\/strong\u003e Lets you set low-frequency filtering from 10Hz to 50Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Supports RCA-equipped and speaker-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Level Remote:\u003c\/strong\u003e Allows convenient adjustment of bass level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XED8001D uses a compact black chassis measuring 8.7 x 4.7 x 1.8 inches. Its layout includes power input connections, speaker output terminals, RCA input connections, high-level input, input gain adjustment, crossover controls, a remote-level connection, and a status LED. Two 35A ATC fuses are specified for the amplifier.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely on a solid vehicle or amplifier-rack surface, leaving room for wiring and access to the adjustment controls. Match the subwoofer wiring to a 2-ohm minimum load, then set gain and filtering to suit the source unit and enclosure. The manufacturer documentation identifies 4 AWG as the maximum input wire gauge; use appropriately fused power wiring and follow the installation manual for grounding and connection guidance.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45620959805510,"sku":"CER-XED8001D","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/5157L_HCjdL.jpg?v=1784371304"},{"product_id":"crunch-gp-2500-1-2500w-monoblock-car-amplifier","title":"Crunch GP-2500.1 2500W Monoblock Car Amplifier","description":"\u003cp\u003eThe Crunch GP-2500.1 Ground Pounder is a single-channel car audio amplifier designed to power a subwoofer system. It provides one amplified output channel and supports subwoofer-focused tuning controls. This makes it a practical choice for adding dedicated low-frequency amplification to a vehicle audio system.\u003c\/p\u003e\u003cp\u003eIts rated output is listed at 1 x 1,250 watts at 4 ohms and 1 x 2,500 watts at 2 ohms. The mono configuration is intended for a single subwoofer or a properly wired group of subwoofers. Matching the final speaker load to the amplifier's supported power ratings is important during system planning.\u003c\/p\u003e\u003cp\u003eThe GP-2500.1 uses a Class A\/B amplifier design with Crunch SPEED-FET MOSFET output devices and a pulse-width-modulated power supply. A low-noise preamplifier circuit is used at the signal input stage. Together, these features support a subwoofer amplifier layout with adjustable bass-system controls.\u003c\/p\u003e\u003cp\u003eFor tuning, the amplifier includes a variable electronic 12 dB-per-octave crossover, a 10-40 Hz subsonic filter, phase adjustment, and selectable bass boost. These controls help integrate the subwoofer with the rest of the system and tailor its operating range. A wired bass remote is included for accessible adjustment from the vehicle cabin.\u003c\/p\u003e\u003cp\u003eThe amplifier accepts low-level RCA signals as well as high-level speaker inputs for systems without RCA outputs. This allows it to work with many aftermarket and factory-style source units when installed with the appropriate wiring. Its RCA output can also pass signal onward to a second amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Subwoofer Output:\u003c\/strong\u003e Single-channel design for dedicated subwoofer amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Power Rating:\u003c\/strong\u003e Delivers 1 x 2,500 watts at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossover:\u003c\/strong\u003e 12 dB-per-octave electronic filtering supports system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubsonic Filter:\u003c\/strong\u003e Adjustable 10-40 Hz filter helps manage very low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Connects to source units without RCA outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Provides convenient in-vehicle bass-level adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GP-2500.1 has a black and red chassis with a QTD aluminum heat sink for thermal dispersion. Nickel-plated brass terminals are paired with screw-down connectors for the power, ground, and speaker connections. LED diagnostic indicators provide visual monitoring for overload and speaker-short protection.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely on a surface with adequate ventilation, and do not mount it upside down. The manufacturer specifies 4 AWG power and ground terminals, 12 AWG speaker terminals, and two 30A fuses. Use RCA inputs where available, or use the supplied high-level-input harness with a source unit that lacks RCA outputs.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45624228544582,"sku":"GP-2500-1","price":147.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61RDzQwyfEL.jpg?v=1784373215"},{"product_id":"hertz-dsk160-3-6-2-way-component-speaker-system","title":"Hertz DSK160-3 6\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz DSK160-3 is a 6-inch, two-way component speaker system designed for vehicle audio upgrades that need separate woofers and tweeters. It combines DV 160.3 mid-woofers with DT 24.3 tweeters and compact inline crossover wiring. This format lets the tweeters be placed independently from the woofers for a more flexible installation.\u003c\/p\u003e\u003cp\u003eWith 80 watts continuous power handling and a 4-ohm system impedance, this kit is suited to compatible aftermarket head units or external amplification. Its 93 dB SPL sensitivity supports strong output from modest power while retaining capacity for a properly matched amplifier. The 50 Hz to 23 kHz stated frequency response covers midbass through high-frequency detail.\u003c\/p\u003e\u003cp\u003eThe DV 160.3 woofer uses a water-repellent pressed-paper V-cone and a TPU surround. This construction is intended to support controlled excursion and damp resonances in typical door-speaker locations. A high-density-flux ferrite motor and pure copper voice coil provide the woofer's drive system.\u003c\/p\u003e\u003cp\u003eThe DT 24.3 uses a 24 mm PEI dome-cone tweeter with a neodymium magnet and annular acoustic lens. Its compact size supports external or flush-style mounting with the supplied mounting accessories. The supplied high-pass crossover wiring directs high frequencies to the tweeter while reducing installation space requirements.\u003c\/p\u003e\u003cp\u003eThis kit is a practical choice for replacing factory 6-inch component speakers where separate tweeter placement is available. An included adapter ring is intended for select GM and Honda vehicles with 6-inch OEM speaker positions. Check vehicle-specific mounting depth, cutout dimensions, wiring connections, and panel clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters allow more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports compatible head units or properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps suit the woofer for vehicle door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 mm PEI Tweeter:\u003c\/strong\u003e Handles upper-frequency reproduction in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline High-Pass Crossover:\u003c\/strong\u003e Saves mounting space in OEM-style upgrade installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGM\/Honda Adapter Ring:\u003c\/strong\u003e Helps fit select vehicles using 6-inch OEM speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DV 160.3 woofer combines a high-density-flux ferrite magnet, 25 mm pure copper voice coil on a Conex former, V-cone profile, and TPU surround. Its DIN-size basket has abrasion-resistant dust paint, while tin-plated terminals and silver-plated lead wires are used for its electrical connections. The DT 24.3 tweeter uses a neodymium magnet, PEI dome-cone diaphragm, and annular acoustic lens.\u003c\/p\u003e\u003cp\u003eInstall the woofers only where the 127 mm cutout and approximately 56.5 mm mounting depth can be accommodated, while allowing clearance for the basket and terminals. Connect the tweeter through the supplied crossover wiring rather than directly to a full-range speaker output. Use the supplied tweeter cups, gasket, and adapter ring where appropriate, and verify polarity and vehicle-specific fitment before reassembling trim panels.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631730679878,"sku":"DSK160-3","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618vCIhVXtL.jpg?v=1784380612"},{"product_id":"hertz-mlk700-3-3-two-way-component-speaker-system","title":"Hertz MLK700-3 3\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz MLK700-3 is a 3-inch two-way component speaker system designed to cover the midrange and high-frequency portion of an advanced car-audio installation. It combines ML 700.3 extended midrange drivers, ML 280.3 tweeters, and dedicated MLCX 2 TM.3 passive crossover networks. This configuration is intended for systems that need focused mid-high reproduction while using separate larger drivers for bass and mid-bass duties.\u003c\/p\u003e\u003cp\u003eThis system is suited to enthusiasts building a multi-amplified front stage rather than replacing a conventional full-range door speaker. Hertz specifies it for use with ML 1650.3 or ML 1800.3 Legend woofers in an actively filtered configuration. The system has a 4-ohm nominal impedance and handles 100 watts continuous or 200 watts peak power.\u003c\/p\u003e\u003cp\u003eThe MLK700-3 covers a specified 200 Hz to 28 kHz frequency range, with the passive network crossing the midrange and tweeter at 4.5 kHz. The compact 70 mm midrange uses an exponential V-cone profile intended to support broad dispersion through the upper midrange. The separate 35 mm dome tweeter extends the system's upper-frequency capability while allowing more flexible placement.\u003c\/p\u003e\u003cp\u003eIts ML 700.3 midrange uses a pressed-pulp cone with cotton fibres, a Boundary Free IIR rubber surround, and a neodymium motor. The midrange also uses low-carbon-content CNC-machined plates, a copper-covered central pole, and a one-layer voice coil. For the tweeter, Hertz uses a Tetolon fiber dome, neodymium motor, copper short-circuit ring, and a die-cast aluminum faceplate.\u003c\/p\u003e\u003cp\u003eThe included MLCX 2 TM.3 crossover provides practical tonal adjustment after installation. Its Mid-Notch selector offers 0, -4, and -6 dB settings, while the tweeter level can be selected at +2, 0, or -2 dB. This makes the system adaptable to different mounting positions and the acoustic character of the vehicle cabin.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Inch Two-Way System:\u003c\/strong\u003e Combines a 70 mm extended midrange and 35 mm dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossover:\u003c\/strong\u003e Separates midrange and tweeter duties at 4.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMid-Notch Adjustment:\u003c\/strong\u003e Offers three midrange contour settings for vehicle-specific tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Control:\u003c\/strong\u003e Provides +2, 0, and -2 dB adjustment positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Midrange Profile:\u003c\/strong\u003e Uses an exponential cone geometry for wide mid-high dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Driver Materials:\u003c\/strong\u003e Uses neodymium motors, cotton-fibre pulp, Tetolon, and aluminum parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ML 700.3 midrange uses a three-spoke aluminum-alloy basket with built-in venting, a CNC-machined diamond-cut basket edge, and a supplied die-cast aluminum grille. Its cone is made from pressed pulp reinforced with cotton fibres, while the tweeter uses a CNC-machined aluminum frame and rear chamber with a die-cast aluminum faceplate. The crossover network uses 160V ultra-low-DF polyester bi-metallized film capacitors, air-wound copper inductors, and wirewound resistors.\u003c\/p\u003e\u003cp\u003ePlan this set as part of a component front-stage installation, with each crossover connected between the amplifier and its matching ML 700.3 midrange and ML 280.3 tweeter. Hertz's suggested setup specifies a 250 Hz high-pass filter at 12 dB per octave at the amplifier for the MLK 700.3 system. Verify available mounting space before installation: the ML 700.3 is listed at 87.8 mm overall diameter, 74 mm cutout diameter, and 41.3 mm mounting depth.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631772098630,"sku":"MLK700-3","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71nfs_ziK0L.jpg?v=1784382348"},{"product_id":"hertz-mlpower1-mille-legend-d-class-mono-bass-amplifier","title":"Hertz MLPOWER1 Mille Legend D-Class Mono Bass Amplifier","description":"\u003cp\u003eThe Hertz MLPOWER1 is a Mille Legend Series mono Class-D amplifier designed to power a dedicated car-audio subwoofer channel. It delivers 1,000 watts RMS at 2 ohms or 1 ohm, with 600 watts RMS at 4 ohms. This makes it suitable for systems that need substantial low-frequency output from a single amplifier channel.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for installers and enthusiasts building a subwoofer stage around a compatible 1- to 4-ohm final load. Its mono layout keeps the output focused on bass reproduction instead of full-range speaker channels. The 18 to 500 Hz bandwidth and adjustable filtering support integration with front and rear speaker systems.\u003c\/p\u003e\u003cp\u003eThe MLPOWER1 uses Hertz ADC Advanced D-Class Technology for compact, efficient amplification. Its low-pass crossover is continuously adjustable from 50 to 500 Hz with a 24 dB-per-octave slope, while the subsonic high-pass filter is adjustable from 18 to 40 Hz. A continuously variable 0 to 180-degree phase control helps tailor subwoofer alignment within the vehicle.\u003c\/p\u003e\u003cp\u003eHertz equips the amplifier with a thermally optimized heat sink that combines extruded and die-cast aluminum construction. A removable top control panel provides access to setup adjustments. Four status LEDs monitor operating conditions, including thermal, overload, and speaker-related faults.\u003c\/p\u003e\u003cp\u003eIntegration options include RCA pre-level input for aftermarket sources and balanced speaker-level input for factory-radio upgrades. When speaker-level input is used, Hertz ART automatic remote turn-on\/off can manage amplifier activation. A pre-out is also provided for passing signal to additional equipment, and the optional HRC BM remote can provide subwoofer-level adjustment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000-Watt Mono Output:\u003c\/strong\u003e Delivers 1,000 watts RMS at 2 ohms or 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADC Class-D Design:\u003c\/strong\u003e Provides efficient mono amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stability:\u003c\/strong\u003e Supports final speaker loads from 1 to 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 dB\/Octave Filters:\u003c\/strong\u003e Offers adjustable low-pass and subsonic crossover control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Signal Inputs:\u003c\/strong\u003e Accepts RCA pre-level and balanced speaker-level signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LED Monitoring:\u003c\/strong\u003e Indicates power, thermal, overload, and speaker conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MLPOWER1 uses a compact aluminum heat-sink structure combining extrusion and die-casting. Its control section is located on top beneath a removable panel, keeping tuning controls accessible after installation. The chassis measures 13.74 inches long, 6.69 inches wide, and 1.84 inches high at its maximum dimensions.\u003c\/p\u003e\u003cp\u003ePlan the installation around a compatible 1- to 4-ohm final subwoofer load and the amplifier's three 40-amp fuses. Use the RCA Pre IN connection with an aftermarket source, or use the Speaker IN connection when retaining a compatible factory head unit. The package includes three 40-amp blade fuses and four mounting screws; the HRC BM bass-management remote is optional.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631773212742,"sku":"MLPOWER1","price":1101.6,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/711G4whwcZL.jpg?v=1784382391"},{"product_id":"hertz-venezia-v5c-5-channel-compact-marine-amplifier","title":"Hertz Venezia V5C 5-Channel Compact Marine Amplifier","description":"\u003cp\u003eThe Hertz Venezia V5C is a compact five-channel marine amplifier designed to power four full-range speakers and a subwoofer from one chassis. It provides a practical solution for boats where installation space is limited but a complete, amplified audio system is desired. Its five-channel layout supports a balanced system with dedicated power for cabin, cockpit, or tower speakers plus bass reinforcement.\u003c\/p\u003e\u003cp\u003eAt 14.4V, the Venezia V5C delivers 80 watts RMS to each of four channels at 4 ohms and 330 watts RMS to the subwoofer channel at 4 ohms. For compatible 2-ohm loads, output rises to 115 watts RMS per full-range channel and 550 watts RMS for the subwoofer channel. The amplifier can also be configured in a three-channel arrangement using bridged full-range channels.\u003c\/p\u003e\u003cp\u003eHertz Advanced Class D technology is used to provide efficient amplification in a compact marine-ready format. The amplifier has a 10 Hz to 42 kHz bandwidth and is Hi-Res certified, supporting detailed playback from compatible source components and speakers. Balanced fully-differential input circuitry is designed to help reject electromagnetic interference in demanding onboard electrical environments.\u003c\/p\u003e\u003cp\u003eThe Venezia V5C is engineered and tested for marine use, including exposure to UV, salt fog, vibration, temperature changes, and thermal shock. Its IPX2 rating applies when the amplifier is mounted vertically with its connections facing downward. Corrosion-resistant circuit boards and a fanless cooling design support installation in appropriately protected marine locations.\u003c\/p\u003e\u003cp\u003eBuilt-in crossover controls allow the amplifier to be matched to full-range speakers, component systems, and a subwoofer without requiring an external crossover. The A and B channels offer selectable filter arrangements, while the subwoofer section includes low-pass, subsonic, phase, and bass-boost adjustments. Safe-Lock input, output, and power connections help create a secure installation, while automatic short-circuit, overload, and thermal protection helps safeguard the amplifier during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Configuration:\u003c\/strong\u003e Powers four speakers and one subwoofer from a single amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Class D Design:\u003c\/strong\u003e Delivers efficient power with reduced heat generation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e Tested for UV, salt fog, vibration, and temperature exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX2 Certification:\u003c\/strong\u003e Supports water-drip resistance when vertically mounted correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossovers:\u003c\/strong\u003e Provides adjustable filtering for speaker and subwoofer tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Protection Circuitry:\u003c\/strong\u003e Resets after short-circuit, overload, or thermal protection events.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Venezia V5C uses a compact die-cast aluminum chassis with an integrated fanless convection cooling system. Its marine-focused construction includes corrosion-resistant, coated circuit boards and a polycarbonate cover protecting the onboard control section. Balanced fully-differential inputs and Safe-Lock connections are intended to support clean signal transfer and durable wiring connections.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a ventilated, protected location and use the vertical mounting orientation with connections facing down when IPX2-rated installation is required. It accepts dedicated RCA preamp inputs for channels A, B, and subwoofer, so pair it with a source unit or processor that provides appropriate preamp outputs. Match connected speakers to the stated impedance limits, configure the onboard filters for the system layout, and use bridged channels only in the specified three-channel configuration.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631873974342,"sku":"VENEZIAV5C","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61gEiMJL9fL.jpg?v=1784385129"},{"product_id":"audison-av1-1-1-1-voce-series-tweeters-pair","title":"Audison AV1-1 1.1\" Voce Series Tweeters (Pair)","description":"\u003cp\u003eThe Audison AV 1.1 is a pair of 28 mm (1.1-inch) component tweeters designed to add dedicated high-frequency reproduction to a car audio system. They are suited to replacing factory tweeters or building a custom active or passive component front stage. With a 4-ohm nominal impedance and 92 dB sensitivity, they can be matched with compatible car-audio amplification and crossover hardware.\u003c\/p\u003e\u003cp\u003eThese tweeters are intended for listeners who want a separate high-frequency driver rather than relying on a coaxial speaker’s integrated tweeter. Their specified 1.2 kHz to 22 kHz frequency response supports detailed upper-frequency reproduction when the drivers are properly high-pass filtered. The compact 48 mm outer diameter also helps with installations in factory sail panels, dash locations, or custom A-pillar pods where space permits.\u003c\/p\u003e\u003cp\u003eThe AV 1.1 uses a Tetolon dome, a silk-and-cotton material with proprietary damping treatment. Audison pairs this dome with a lightweight, double-layer CCAW copper-clad aluminum voice coil to keep the moving assembly compact. The design is intended to provide efficient, controlled high-frequency output with a natural level of detail.\u003c\/p\u003e\u003cp\u003eAn annular rear damping chamber and dedicated damping material are part of the AV 1.1’s acoustic design. This rear-chamber construction is engineered to extend usable low-frequency response for a tweeter and reduce harmonic distortion. A high-flux-density neodymium magnet supports the compact motor assembly.\u003c\/p\u003e\u003cp\u003eThe AV 1.1 can be used with compatible Audison Voce woofers, midrange drivers, passive crossovers, or an active DSP-based system. Audison specifies high-pass filtering at 2.0 kHz with a 12 dB\/octave slope for the tweeter’s 180-watt peak power-handling specification. Proper crossover selection, polarity, aiming, and level matching are important for integrating the tweeters into a balanced system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Dome:\u003c\/strong\u003e Silk-and-cotton dome material supports smooth high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e High-flux motor design keeps the tweeter assembly compact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Layer CCAW Voice Coil:\u003c\/strong\u003e Lightweight copper-clad aluminum construction promotes efficient operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnnular Rear Chamber:\u003c\/strong\u003e Damped rear volume supports lower tweeter crossover capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with compatible car-audio amplifiers and crossovers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Profile:\u003c\/strong\u003e 48 mm outer diameter and 15.2 mm mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 1.1 combines a 28 mm Tetolon dome with a 28 mm double-layer CCAW voice coil on a Kapton former. Its neodymium motor measures 27.9 mm, while the annular rear damping chamber uses dedicated damping material. Each tweeter weighs 0.073 kg and has a total depth of 28 mm.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation: the specified mounting diameter is 44.8 mm, outer diameter is 48 mm, and mounting depth is 15.2 mm. Use a suitable high-pass crossover or DSP setting; Audison specifies a 2.0 kHz high-pass filter at 12 dB\/octave for the listed peak-power condition. The pair is supplied with grilles, and installation should be planned around correct left\/right aiming, secure mounting, and matching the tweeter level to the accompanying midbass or midrange drivers.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45632058523718,"sku":"AV1-1","price":379.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71MFq9JxwgL.jpg?v=1784393136"},{"product_id":"infinity-3002a-2-channel-powersports-amplifier","title":"Infinity 3002A 2-Channel Powersports Amplifier","description":"\u003cp\u003eThe Infinity Kappa Perfect 3002A is a compact two-channel Class D powersports amplifier designed to add clean external power where installation space is limited. It is suited to motorcycle, marine, and other powersports audio systems that need more output than a source unit can provide. Its two-channel layout can power a pair of speakers or be bridged for a single compatible subwoofer application.\u003c\/p\u003e\u003cp\u003eWith 100 watts RMS per channel at 4 ohms and 150 watts RMS per channel at 2 ohms, the 3002A is built for properly matched full-range speakers. When configured in bridged mode, it delivers 300 watts RMS at 4 ohms. The selectable crossover and bass-boost controls help tailor the amplifier to speaker-focused or subwoofer-focused system layouts.\u003c\/p\u003e\u003cp\u003eThe amplifier uses efficient Class D operation in an ultra-compact aluminum chassis measuring only 8.157 inches wide, 1.75 inches high, and 3.35 inches deep. Its outdoor-oriented construction includes a weather-resistant chassis and conformal-coated circuit board. This makes it a practical choice for installations exposed to the vibration and environmental demands common in powersports vehicles.\u003c\/p\u003e\u003cp\u003eIntegration is flexible because the 3002A accepts both RCA line-level and speaker-level input signals. The input selector accommodates low-level aftermarket source outputs or high-level factory-style speaker outputs. When speaker-level inputs are used, its DC-offset signal sensing can turn the amplifier on without a separate remote-turn-on connection.\u003c\/p\u003e\u003cp\u003eSystem tuning is straightforward with selectable full-range, high-pass, and low-pass crossover modes. The crossover frequency can be set to 60, 80, or 120 Hz with a 12 dB-per-octave slope, while the low-pass mode also enables selectable 0, +6, or +12 dB bass boost at 45 Hz. Use it as a compact speaker amplifier in a two-channel system, or bridge it into a 4-ohm subwoofer setup when appropriate.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Supplies efficient power for speakers or a bridged subwoofer configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W x 2 RMS at 4 Ohms:\u003c\/strong\u003e Provides substantial power for matched full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Bridged Output:\u003c\/strong\u003e Supports one compatible 4-ohm subwoofer or mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Electronic Crossover:\u003c\/strong\u003e Chooses full-range, high-pass, or low-pass operation for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Works with RCA preamp outputs or speaker-wire signal inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC-Offset Signal Sensing:\u003c\/strong\u003e Enables automatic turn-on when using speaker-level inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 3002A combines an aluminum chassis with a compact footprint for installations where conventional amplifiers may not fit. Its weather-resistant construction and conformal-coated circuit board are intended for demanding powersports environments. Power and protection indicators provide visible operating-status feedback, while the amplifier includes a 25A fuse.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a secure location with adequate airflow and do not install it with the heat sink facing downward. Infinity recommends 10 AWG wire, and the main fuse and fuse holder should be located within 18 inches of the vehicle battery for direct-hardwire installations. Optional mating connectors can be used, or the supplied harness connections can be direct-wired; select HI or LO input level to match the source signal and set gain carefully before final tuning.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632082837574,"sku":"INFWSKP3002AM","price":230.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61MmdX8EMFL.jpg?v=1784393735"},{"product_id":"jbl-club-44f-4-two-way-car-speakers","title":"JBL Club 44F 4\" Two-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 44F is a pair of 4-inch, two-way coaxial car speakers designed for replacing worn or limited factory speakers in compact speaker locations. Its 3-ohm nominal impedance and 90dB sensitivity help it work effectively with many factory and aftermarket audio systems. The pair handles up to 35 watts RMS per speaker and is intended for listeners seeking a straightforward small-speaker upgrade.\u003c\/p\u003e\u003cp\u003eThe Club 44F combines a polypropylene woofer with an edge-driven silk dome tweeter to cover the 75Hz to 20kHz frequency range. This two-way design places both the woofer and tweeter in one speaker assembly, helping simplify replacement in compatible factory locations. Its sound character is designed to provide clean midrange detail and smooth high-frequency reproduction from a compact 4-inch format.\u003c\/p\u003e\u003cp\u003eJBL's Plus One woofer cone architecture increases cone area relative to conventional speakers of the same nominal size. More cone area can help the speaker move more air, supporting sensitivity and low-frequency output within the limits of a 4-inch driver. The Club 44F also uses an acoustically damped polypropylene cone to help control unwanted cone resonance.\u003c\/p\u003e\u003cp\u003eThe full edge-driven silk dome tweeter is designed for broad, smooth high-frequency response. Its silk diaphragm complements the woofer for a balanced two-way presentation without requiring a separately mounted tweeter. The 3kHz crossover point divides the signal between the woofer and tweeter within the coaxial assembly.\u003c\/p\u003e\u003cp\u003eFor a larger system, the Club 44F can be used as a replacement speaker in compatible dash, door, or rear locations, paired with a factory radio or an amplifier matched appropriately to its 35W RMS rating per speaker. Its compact dimensions support installation where space is limited, but vehicle-specific fitment should always be checked before purchase. The package includes two speakers and one foam gasket.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Two-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for compact replacement installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35W RMS Power Handling:\u003c\/strong\u003e Supports continuous power up to 35 watts per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Uses increased cone area for its nominal speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Delivers extended, smooth high-frequency reproduction to 20kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamped Polypropylene Woofer Cone:\u003c\/strong\u003e Helps provide controlled performance in automotive conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed to work with compatible factory or aftermarket car audio power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 44F uses a UV-resistant polypropylene woofer cone with acoustic damping, a silk dome tweeter, and JBL's Plus One cone geometry. JBL also specifies a larger magnet design for the Club speaker lineup to support power handling. The speaker has a 102.4mm outer diameter, 92.1mm mounting cutout diameter, 49.3mm mounting depth, and 63.8mm total depth.\u003c\/p\u003e\u003cp\u003eConfirm the factory opening, mounting depth, mounting-hole pattern, grille clearance, and wiring connection before installation. The Club 44F is a 3-ohm speaker rated at 35W RMS each, so any external amplifier should be compatible with its impedance and set conservatively to avoid overpowering the speakers. JBL lists two speakers and one foam gasket in the box; vehicle-specific brackets, adapters, wiring harnesses, screws, and grilles should be planned as needed.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632135528518,"sku":"JBLSPKCB44F","price":99.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61uxhXX2yhL.jpg?v=1784396501"},{"product_id":"jbl-club-64ctp-6-5-component-speakers-with-tweeter-pods","title":"JBL Club 64CTP 6.5\" Component Speakers With Tweeter Pods","description":"\u003cp\u003eThe JBL Club 64CTP is a 6-1\/2-inch two-way component speaker system designed for vehicle audio upgrades. It separates the woofer and tweeter so installers can place the high frequencies independently from the midbass drivers. The system includes dedicated crossovers and tweeter pods to support a more flexible installation than a conventional coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis set is suited to drivers replacing factory door speakers while seeking separate tweeter placement. Its 3.0-ohm nominal impedance and 92dB sensitivity are specified for efficient operation in automotive audio systems. Power handling is rated at 70W RMS and 210W peak for the complete component system.\u003c\/p\u003e\u003cp\u003eThe 6-1\/2-inch woofers use JBL Plus One cone architecture, which increases cone area within the speaker size. Their acoustically damped polypropylene cones are UV-resistant for use in the heat and humidity of a vehicle environment. The published frequency response is 55Hz to 20kHz.\u003c\/p\u003e\u003cp\u003eSeparate tweeters help bring upper-frequency detail closer to the preferred listening position. The included external crossovers use a 5.5kHz crossover point and provide a selectable tweeter output level of 0dB or +3dB. This adjustment can help account for tweeter mounting location and cabin acoustics.\u003c\/p\u003e\u003cp\u003eThe Club 64CTP package supports several tweeter mounting approaches, including flush, surface, Starfish adapter, I-Mount, and pod installations. The dedicated pods offer angle adjustment after mounting for more controlled aiming. It is a practical choice for a component-speaker upgrade where door woofer fitment and flexible tweeter positioning are both important.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates the 6-1\/2-inch woofers and tweeters for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to 70 watts RMS per system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Cone Architecture:\u003c\/strong\u003e Provides increased cone area within the 6-1\/2-inch woofer format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Acoustically damped, UV-resistant cones suit automotive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0dB or +3dB tweeter output to suit placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Pods:\u003c\/strong\u003e Allows post-mount tweeter aiming for different listening positions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 64CTP uses 6-1\/2-inch polypropylene woofers with JBL Plus One cone architecture and separate tweeters. External crossovers divide the signal at 5.5kHz, while the tweeter system includes flush-mount, surface-mount, Starfish, I-Mount, and pod hardware. Grilles, adapter rings, mounting hardware, spacers, washers, and foam gasket material are included.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and available door-panel clearance before installation. The woofer has a 158.0mm outside diameter, 127.0mm cutout diameter, and 51.5mm mounting depth. Connect each woofer and tweeter through its included crossover, then select the 0dB or +3dB tweeter level and aim the pod or I-Mount tweeter as needed.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632136675398,"sku":"JBLSPKCB64CTP","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61-NfmkIErL.jpg?v=1784396751"},{"product_id":"kenwood-kac-d8105-5-channel-class-d-car-amplifier","title":"Kenwood KAC-D8105 5-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Kenwood KAC-D8105 is a five-channel Class D car amplifier designed to run four full-range speakers and a dedicated subwoofer from one compact chassis. It provides a practical upgrade path for vehicles where factory amplification is limited or where separate amplifiers would take up too much space. With dedicated A\/B and subwoofer channel sections, it supports a complete speaker-and-subwoofer system from a single amplifier.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the KAC-D8105 is rated for 50 watts RMS across each of four A\/B channels plus 300 watts RMS for the subwoofer channel. At 2 ohms, its ratings increase to 75 watts RMS x 4 and 500 watts RMS x 1. This makes it suitable for systems that need clean power for front and rear speakers while retaining a separate low-frequency channel for a compatible subwoofer.\u003c\/p\u003e\u003cp\u003eThe A\/B channels have a 20 Hz to 50 kHz frequency response, while the subwoofer channel is specified from 20 Hz to 200 Hz. Variable high-pass and low-pass filters help divide frequencies between speakers and subwoofer for a more purposeful system setup. A variable subwoofer bass boost control is also provided for low-frequency adjustment at 40 Hz.\u003c\/p\u003e\u003cp\u003eKenwood equips the KAC-D8105 with Dual Sigma Drive negative-feedback technology, which is intended to improve damping and control speaker movement. Its Power MOS-FET switching power supply supports the amplifier's efficient Class D design. Independent gain adjustment for the A\/B and subwoofer sections allows installers to set levels for the full-range and bass portions of the system separately.\u003c\/p\u003e\u003cp\u003eThe amplifier accepts both RCA and speaker-level input signals, making it useful with aftermarket receivers as well as many factory-radio installations. Signal-sensing turn-on can activate the amplifier from a speaker-level input signal when applicable. Its compact 9-inch-wide chassis is designed for installations where space is limited, including many under-seat or trunk locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Configuration:\u003c\/strong\u003e Powers four speakers plus one dedicated subwoofer channel from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1600W Maximum Power:\u003c\/strong\u003e Provides the manufacturer's stated maximum-power rating for the complete amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Load Capability:\u003c\/strong\u003e Supports rated operation with compatible 2-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters help direct frequencies to appropriate speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker-Level Inputs:\u003c\/strong\u003e Supports connection to compatible factory-radio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sensing Turn-On:\u003c\/strong\u003e Can detect an incoming speaker-level signal for activation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAC-D8105 uses an extruded aluminum heat-sink design and a compact Class D layout. Its power and ground connections use M6 screw-type terminal blocks, while the speaker outputs use M4 screw-type terminal blocks. The chassis measures 9 inches wide by 2-3\/16 inches high by 7-3\/8 inches deep and weighs 4.5 pounds.\u003c\/p\u003e\u003cp\u003ePlan the installation around the amplifier's dimensions, ventilation needs, and the vehicle's 11 to 16 volt operating range. Connect a source through RCA line inputs or the speaker-level input, then set the A\/B high-pass and subwoofer low-pass controls to suit the speakers and subwoofer being used. Match loads carefully: the bridged A\/B outputs require a 4- to 8-ohm load, while the amplifier is rated for 2- to 8-ohm allowable speaker loads.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633058144326,"sku":"KAC-D8105","price":420.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61oFKOmDAVL.jpg?v=1784404319"},{"product_id":"memphis-prx1500-5v2-5-channel-car-amplifier","title":"Memphis PRX1500.5V2 5-Channel Car Amplifier","description":"\u003cp\u003eThe Memphis PRX1500.5V2 is a five-channel car amplifier designed to power front and rear speakers along with a dedicated subwoofer from one chassis. It is suited to vehicle audio upgrades that need stronger speaker output and meaningful low-frequency support without adding separate full-range and mono amplifiers. Its channel layout supports a complete amplified system while keeping signal routing and mounting more straightforward.\u003c\/p\u003e\u003cp\u003eFor the four main channels, the amplifier delivers 75 watts RMS per channel at 4 ohms or 125 watts RMS per channel at 2 ohms. The dedicated subwoofer channel provides 400 watts RMS at 4 ohms, 700 watts RMS at 2 ohms, or 1,000 watts RMS at 1 ohm. This makes it a practical match for systems using efficient component or coaxial speakers plus a properly impedance-matched subwoofer.\u003c\/p\u003e\u003cp\u003eThe main channels can also be bridged to provide 250 watts RMS x 2 at 4 ohms, allowing the amplifier to support alternate system layouts. Independent front\/rear and subwoofer tuning sections help tailor the output to the speakers and enclosure in use. Variable crossover controls help remove unnecessary low bass from smaller speakers while directing bass information to the subwoofer channel.\u003c\/p\u003e\u003cp\u003eA compact extruded-aluminum heatsink manages the amplifier's physical structure, while the concealed top-mounted controls provide access to setup adjustments. The acrylic top cover and blue LED accent lighting give the amplifier a finished appearance without changing its core installation role. Selectable turn-on options and high- or low-level signal capability broaden compatibility with aftermarket or factory audio sources.\u003c\/p\u003e\u003cp\u003eThe PRX1500.5V2 fits well in a staged system upgrade when a single amplifier is preferred for both cabin speakers and bass. Its 1-ohm-stable mono subwoofer channel gives flexibility when selecting and wiring compatible subwoofers. A wired bass-level control is included for convenient adjustment of the subwoofer-channel level from the front of the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive-Channel Layout:\u003c\/strong\u003e Powers four speakers and one dedicated subwoofer channel from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Sub Channel:\u003c\/strong\u003e Delivers up to 1,000 watts RMS to a compatible subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Main Channels:\u003c\/strong\u003e Main channels can run as 250 watts RMS x 2 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Helps match speaker and subwoofer output ranges for a cleaner setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Signal Turn-On:\u003c\/strong\u003e Supports remote-wire, DC-offset, or audio-sensing activation methods.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Knob:\u003c\/strong\u003e Lets the driver adjust subwoofer-channel level from the listening position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX1500.5V2 uses an extruded aluminum heatsink, single-sided terminal layout, and a removable LED-accented acrylic top panel. Its controls are top mounted beneath the panel for protected access during tuning. Blue LED top-cover and ground lighting are integrated into the design.\u003c\/p\u003e\u003cp\u003eUse the amplifier with a properly fused power installation and verify final speaker impedance before connecting outputs. The main channels are rated for 2-ohm stereo operation or 4-ohm bridged operation, while the subwoofer channel is stable to 1 ohm. Mount it in a secure, ventilated location, use the recommended 0GKIT amplifier kit, and set gain and crossover controls according to the connected speakers, subwoofer, and source signal.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633195638854,"sku":"PRX1500-5V2","price":599.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/41exvqF9cWL.jpg?v=1784413347"},{"product_id":"memphis-srx300-4v-4-channel-car-amplifier","title":"Memphis SRX300.4V 4-Channel Car Amplifier","description":"\u003cp\u003eThe Memphis SRX300.4V is a four-channel car audio amplifier designed to add dedicated power to factory-replacement or aftermarket speakers. It supplies 50 watts RMS to each channel at 4 ohms or 75 watts RMS per channel at 2 ohms. This makes it a practical choice for front-and-rear speaker upgrades that need more output and control than a head unit can provide.\u003c\/p\u003e\u003cp\u003eIts four-channel layout supports several system approaches, including powering four speakers or using bridged channel pairs for two 4-ohm loads. In bridged operation, it delivers 150 watts RMS per pair at 4 ohms. The amplifier is stable to 2 ohms per channel in stereo operation and 4 ohms when bridged.\u003c\/p\u003e\u003cp\u003eIndependent front and rear control sections help tailor the amplifier to the speakers connected to each pair of channels. Selectable high-pass, full-range, and low-pass crossover modes allow it to support full-range speakers, components, or appropriate bridged applications. Selectable bass boost settings provide another adjustment for system tuning.\u003c\/p\u003e\u003cp\u003eThe SRX300.4V accepts both RCA preamp signals and speaker-level signals, allowing it to work with many aftermarket and factory audio systems. A 4-channel or 2-channel input-mode switch can simplify installations when the source unit has only a front-channel signal available. Built-in protection circuitry monitors for short circuits, overheating, and over- or under-voltage conditions.\u003c\/p\u003e\u003cp\u003eA textured aluminum heatsink helps manage heat while giving the amplifier a clean black finish. The integrated LED accent light strip adds visible illumination for installations where the amplifier is on display. Memphis recommends its 8GKIT amplifier wiring kit for this model.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Output:\u003c\/strong\u003e Powers front and rear speakers from one amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Stability:\u003c\/strong\u003e Delivers 75 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Capability:\u003c\/strong\u003e Produces 150 watts RMS per bridged channel pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Helps match amplifier output to speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Supports aftermarket and many factory source units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Accent Strip:\u003c\/strong\u003e Adds visible illumination to a custom installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SRX300.4V uses a textured aluminum heatsink with a black finish and integrated LED accent lighting. Its controls, inputs, and status indicator are located on the input side, while internal ATO fuses protect the amplifier. The Power\/Protect indicator illuminates blue during normal operation and red when the amplifier enters protection.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a dry, ventilated location with clearance for wiring and heat dissipation. Use RCA inputs with an aftermarket source unit or the included speaker-level input harness when connecting to compatible factory speaker wiring. Match connected loads to the amplifier's 2-ohm stereo minimum or 4-ohm bridged minimum, and use the crossover and gain controls during final system setup.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633205141574,"sku":"SRX300-4V","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51m9ee8jMHL.jpg?v=1784416239"},{"product_id":"gravity-audio-wz1000-4-warzone-4-channel-class-a-b-amplifier","title":"Gravity Audio WZ1000.4 Warzone 4-Channel Class A\/B Amplifier","description":"\u003cp\u003eThe Gravity Audio WZ1000.4 Warzone is a four-channel car amplifier designed to add external amplification to compatible vehicle audio systems. Its Class A\/B design supports a broad range of speaker-upgrade layouts while operating at 2- or 4-ohm loads. It is intended for listeners who need independent amplification for front and rear speakers or other four-channel system configurations.\u003c\/p\u003e\u003cp\u003eWith a published maximum output of 1000 watts, the WZ1000.4 is built to provide added power beyond a typical head unit's internal amplifier. The amplifier covers a 20 Hz to 20 kHz frequency response range for full-range audio applications. Its signal-to-noise ratio is rated above 80 dB, while total harmonic distortion is specified below 0.5%.\u003c\/p\u003e\u003cp\u003eAdjustable crossover controls help tailor the amplifier to the speakers and system role selected during installation. The variable high-pass filter adjusts from 50 Hz to 1.2 kHz, while the low-pass filter adjusts from 50 Hz to 500 Hz. A variable bass boost control provides adjustment from 0 to 12 dB.\u003c\/p\u003e\u003cp\u003eThe WZ1000.4 includes both high-level and low-level input options, allowing it to work with many factory or aftermarket source-unit setups. Low-level RCA connections can be used with a head unit that has preamp outputs, while high-level inputs offer an option for systems using speaker-level outputs. A remote bass control is included for accessible bass-level adjustment from the cabin.\u003c\/p\u003e\u003cp\u003eIts compact published dimensions of 8.8 by 8.3 by 2.5 inches can simplify placement in many vehicle installations. The amplifier can serve as the main power stage for a four-speaker upgrade or as part of a more customized system using its crossover controls. Correct impedance matching, secure power wiring, and careful gain setup are important for dependable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel Class A\/B Design:\u003c\/strong\u003e Provides four amplified channels for speaker-system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2- and 4-Ohm Stability:\u003c\/strong\u003e Supports compatible speaker loads at either published impedance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Supplies added amplification for multi-speaker vehicle audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e HPF and LPF adjustments help match amplifier output to speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Boost Control:\u003c\/strong\u003e Offers adjustable low-frequency emphasis from 0 to 12 dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Accommodates speaker-level or RCA signal connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ1000.4 uses a compact amplifier format measuring 223.5 mm long, 211 mm wide, and 64.5 mm high. Its published control set includes gain and crossover adjustments, high- and low-level inputs, speaker outputs, power connections, and a remote bass-control connection. Specific chassis material and fuse information are not published in the confirmed product specifications.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry location with ventilation and room for wiring connections. Use speakers wired within the amplifier's stated 2- or 4-ohm operating range, and select high-level or RCA low-level inputs to suit the source unit. Set crossover points and gain conservatively during setup, then use the included remote bass control for convenient level adjustments.\u003c\/p\u003e","brand":"Warzone","offers":[{"title":"Default Title","offer_id":45668395089990,"sku":"WZ1000-4","price":132.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81NGfIv3snL.jpg?v=1784452497"},{"product_id":"zoom-zha-4-4-channel-portable-headphone-amplifier","title":"Zoom ZHA-4 4-Channel Portable Headphone Amplifier","description":"\u003cp\u003eThe Zoom ZHA-4 is a compact stereo headphone amplifier that distributes one audio source to up to four listeners. It is designed for situations where a recorder, mixer, computer interface, or other device has only one headphone or line output. Each listener receives a dedicated 3.5 mm headphone connection with individual level control.\u003c\/p\u003e\u003cp\u003eThis amplifier is well suited to podcast sessions, band rehearsals, location recording, video production, and small collaborative monitoring setups. Individual volume knobs let each user set a comfortable listening level without changing the other outputs. Separate mute buttons also allow one listener's feed to be silenced independently when needed.\u003c\/p\u003e\u003cp\u003eThe ZHA-4 is built for stereo monitoring, taking a stereo line or headphone signal through its 3.5 mm input and routing it to four powered headphone outputs. Its 24 dB gain, 10 Hz–50 kHz frequency response, and dynamic range of at least 100 dB support clear monitoring across a wide audible range. A +18 dBu clipping level provides useful headroom for compatible source equipment.\u003c\/p\u003e\u003cp\u003ePortable power options make the ZHA-4 practical for fixed and mobile work. It can run from two AA batteries or from a USB-C 5 V, 1 A external power source such as a USB AC adapter or portable battery. A front power indicator shows normal power in green and warns of low battery power in red.\u003c\/p\u003e\u003cp\u003eThe ZHA-4 fits easily between a source device and multiple wired headphones, making it a straightforward expansion tool rather than a replacement for a mixer or audio interface. Use the included stereo mini cable to connect a compatible source, then attach up to four pairs of headphones. It is especially useful when several people need to monitor the same stereo program while retaining personal volume and mute control.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Headphone Outputs:\u003c\/strong\u003e Connect up to four sets of 3.5 mm headphones to one stereo source.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndividual Volume Controls:\u003c\/strong\u003e Set each listener's headphone level independently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Mute Buttons:\u003c\/strong\u003e Mute any individual output without changing the remaining channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStereo Mini Input:\u003c\/strong\u003e Accepts a stereo line or headphone output from compatible audio equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Power Options:\u003c\/strong\u003e Operates from two AA batteries or USB-C external power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePortable Monitoring Design:\u003c\/strong\u003e Adds shared headphone monitoring to compact recording and production systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZHA-4 uses a compact enclosure with four panel-mounted 3.5 mm headphone jacks, individual rotary volume controls, dedicated mute buttons, a power switch, and a status indicator. Zoom specifies the unit at 130 × 70 × 52 mm and 180 g, keeping it easy to place beside a recorder, mixer, or workstation. The manufacturer does not specify the enclosure material.\u003c\/p\u003e\u003cp\u003eConnect the stereo mini input to the line or headphone output of a compatible source using the included stereo mini cable or another suitable 3.5 mm stereo cable. Connect up to four 3.5 mm headphones, set each channel's volume as needed, and select AA or USB-C power with the power switch. For longer sessions, use a USB-C power source rated for 5 V DC and 1 A; for portable use, install two compatible AA batteries.\u003c\/p\u003e","brand":"Zoom","offers":[{"title":"Default Title","offer_id":45669227692102,"sku":"ZHA4","price":79.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/718JrmPliML.jpg?v=1784485723"},{"product_id":"mackie-mp-220bta-dual-driver-bluetooth-in-ear-monitors","title":"Mackie MP-220BTA Dual-Driver Bluetooth In-Ear Monitors","description":"\u003cp\u003eThe Mackie MP-220BTA is a pair of professional in-ear monitors with dual dynamic drivers and an included MP-BTA Bluetooth adapter. It is designed for listeners who need a compact monitoring solution for stage use, rehearsal, personal listening, or mobile playback. The package supports both a wired connection through its detachable cable and wireless use through the included Bluetooth adapter.\u003c\/p\u003e\u003cp\u003eEach earpiece uses two precision dynamic drivers to reproduce a full-range signal with added low-frequency presence and clear detail. The published frequency response is 20 Hz to 20 kHz, with a 16-ohm impedance and 88 dB sensitivity at 1 mW\/1 kHz. This configuration is suited to users who want a more capable monitoring option than a single-driver in-ear design.\u003c\/p\u003e\u003cp\u003eThe low-profile, ergonomically molded earpieces are shaped to sit securely in the ear while helping reduce outside sound. Mackie rates the MP Series design for up to 40 dB of sound isolation when properly fitted. Included foam, silicone, and double-flange ear tips in small, medium, and large sizes help users select a fit that balances comfort, seal, and isolation.\u003c\/p\u003e\u003cp\u003eFor wired use, the MP-220BTA includes a shielded, braided high-fidelity cable with detachable MMCX connectors. The connectors swivel for comfort and durability, while the over-ear cable routing helps keep the cable positioned behind the head. This design is practical for performers and listeners who want a secure fit during active use.\u003c\/p\u003e\u003cp\u003eThe included MP-BTA adapter adds Bluetooth 5 wireless connectivity to the monitors. Its detachable, swiveling MMCX connectors attach directly to the earpieces, and its in-line microphone and controls support calls, music playback, volume adjustment, and track navigation. It can serve as a flexible addition to a wired monitoring setup by allowing the same monitors to connect to Bluetooth-enabled phones, computers, and other compatible devices.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Dynamic Drivers:\u003c\/strong\u003e Two dynamic drivers per earpiece support deep low end and clear detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5 Adapter:\u003c\/strong\u003e Included MP-BTA adapter enables wireless use with Bluetooth-enabled devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetachable MMCX Connections:\u003c\/strong\u003e Swiveling connectors allow cable or adapter changes when needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielded Braided Cable:\u003c\/strong\u003e Wired cable is built for durability and signal performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp To 40 dB Isolation:\u003c\/strong\u003e A proper ear-tip seal helps reduce surrounding sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Ear Tips:\u003c\/strong\u003e Foam, silicone, and double-flange tips support personalized fit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP-220BTA uses ergonomically molded, low-profile earpieces with an over-ear wearing design. Its wired cable is shielded and braided, while the MMCX connections are detachable and swivel for a more adaptable fit. A hard molded carrying case is included for storage and transport.\u003c\/p\u003e\u003cp\u003eSelect the ear-tip type and size that creates a secure, comfortable seal before use. For wired playback, connect the detachable cable to the earpieces and use the included gold-plated 1\/8-inch to 1\/4-inch adapter when a larger headphone jack is required. For wireless use, attach the MP-BTA adapter, charge it with the included USB cable, then pair it as “MP-BTA” from a compatible Bluetooth device.\u003c\/p\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":45669389205574,"sku":"MP-220BTA","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61S_zS0Dj-L.jpg?v=1784497836"},{"product_id":"mackie-thrash212-12-powered-pa-loudspeaker","title":"Mackie Thrash212 12\" Powered PA Loudspeaker","description":"\u003cp\u003eThe Mackie Thrash212 is a self-powered 12-inch PA loudspeaker designed for portable live sound, rehearsals, presentations, and monitoring. Its integrated amplification and two-channel input section reduce the amount of external equipment needed for straightforward setups. It provides a practical solution when clear, high-output reinforcement is needed from a single cabinet.\u003c\/p\u003e\u003cp\u003eThis speaker suits musicians, DJs, presenters, schools, small venues, and event setups that need a compact powered loudspeaker. Two combo XLR\/TRS inputs accept microphone or line-level sources, allowing direct connection of common audio gear. Independent input gain controls support simple two-source setups without requiring a separate mixer.\u003c\/p\u003e\u003cp\u003eThe Thrash212 uses a 12-inch woofer and a 1-inch titanium compression driver in a two-way system. Its published frequency range extends from 52 Hz to 20 kHz at -10 dB, with a maximum peak SPL of 125 dB. The 90° horizontal by 60° vertical coverage pattern is intended to distribute sound across an audience area while retaining useful directionality.\u003c\/p\u003e\u003cp\u003eA 1300-watt peak Class-D amplifier system powers the low- and high-frequency drivers. The built-in crossover operates at 2.4 kHz, while peak and RMS limiting plus amplifier and power-supply thermal protection help manage the system during demanding use. A rear-panel power\/overload LED provides visible operating status.\u003c\/p\u003e\u003cp\u003eFor larger setups, the balanced Mix Out carries the audio from both input channels to another powered loudspeaker or compatible powered subwoofer. The cabinet can serve as a pole-mounted main speaker or as a floor monitor using its dual-angle wedge design. This flexibility makes the Thrash212 suitable as a starting point for a scalable portable PA system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1300W Peak Class-D Amplification:\u003c\/strong\u003e Powers the two-way speaker system without an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-Inch Woofer:\u003c\/strong\u003e Delivers low-frequency output for portable PA applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Titanium Driver:\u003c\/strong\u003e Handles high frequencies with a compression-driver design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Combo Inputs:\u003c\/strong\u003e Connect microphones or line-level sources using XLR\/TRS connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Mix Out:\u003c\/strong\u003e Sends both input channels to another compatible powered device.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Limiting:\u003c\/strong\u003e Helps protect the amplifier and power supply during operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Thrash212 uses a black polypropylene enclosure with a perforated metal grille and four integrated handles. Its asymmetrical cabinet shape supports pole-mounted use as well as floor-monitor placement at a 45° monitor angle. A rotatable grille badge keeps the Mackie logo oriented appropriately in either position.\u003c\/p\u003e\u003cp\u003ePlace the speaker on the floor or use the built-in bottom pole socket with a stand or pole rated for its weight. Connect microphones or line-level sources to either combo input, set the input gains gradually, and use the balanced Mix Out when feeding another powered speaker or subwoofer. The cabinet has no rigging points and is not intended for suspension by its handles.\u003c\/p\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":45669410111558,"sku":"THRASH212US","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/7175x0MGwbL.jpg?v=1784499397"},{"product_id":"mackie-thump210xt-10-powered-loudspeaker","title":"Mackie THUMP210XT 10\" Powered Loudspeaker","description":"\u003cp\u003eThe Mackie THUMP210XT is a compact 10-inch powered PA loudspeaker built for portable sound reinforcement, DJ setups, live performance, announcements, and small venues. Its integrated amplification removes the need for an external power amplifier, helping keep a system simple to transport and deploy. With mic, line, auxiliary, and Bluetooth connectivity, it can accommodate a range of common audio sources.\u003c\/p\u003e\u003cp\u003eA 10-inch high-performance woofer and 1-inch polymer compression driver handle the low- and high-frequency ranges in a two-way active system. Mackie rates the system at 1400 watts peak, with a maximum peak SPL of 127 dB and a frequency range of 52 Hz to 23 kHz at -10 dB. This makes it a practical full-range option where a smaller enclosure is preferred over a larger 12- or 15-inch speaker.\u003c\/p\u003e\u003cp\u003eThe THUMP210XT includes four application-specific voicing modes: Music, Live, Club, and Monitor. Indoor and Outdoor modes provide additional system adjustment for different listening environments. A 40-degree monitor angle also lets the enclosure serve as a floor wedge for performers.\u003c\/p\u003e\u003cp\u003eBuilt-in Feedback Eliminator processing is designed to reduce microphone feedback, while Music Ducking automatically lowers Channel 2 when Channel 1 receives signal. These functions can be useful for presenters, karaoke hosts, DJs, and performers who need to make announcements without manually changing a music level. The rear-panel system also includes status LEDs for key operating modes and overload indication.\u003c\/p\u003e\u003cp\u003eBluetooth 5.0 supports audio streaming and user-interface control through the Thump Connect 2 app. A second THUMP210XT can be linked wirelessly for expanded coverage, with stereo linking and zone-use options supported by the system. For larger systems, the balanced XLR thru output can pass the combined input signal to another compatible loudspeaker or downstream device.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1400W Peak Class-D Power:\u003c\/strong\u003e Integrated Class-D amplification powers the woofer and compression driver without requiring an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Two-Way System:\u003c\/strong\u003e A 10-inch ferrite woofer and 1-inch polymer compression driver provide compact full-range reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Input Section:\u003c\/strong\u003e Two XLR\/TRS combo inputs, a stereo 1\/8-inch input, Bluetooth, and XLR thru support varied source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeedback Eliminator:\u003c\/strong\u003e Selectable processing helps reduce feedback and unwanted low-frequency rumble during microphone use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMusic Ducking:\u003c\/strong\u003e Channel 2 is automatically reduced when Channel 1 receives a signal, helping announcements remain audible.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApp Control And Linking:\u003c\/strong\u003e Bluetooth 5.0 and the Thump Connect 2 app support streaming, control, and wireless linking with another THUMP210XT.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe THUMP210XT uses Mackie's Built-Like-A-Tank cabinet approach in a compact, portable form factor. Mackie does not publish a cabinet-material specification, but the enclosure is designed for portable PA use and includes a standard pole-mount socket, monitor-wedge geometry, and integrated M10 mounting points. At 25.6 pounds, it is sized for easier loading and placement than larger powered loudspeakers.\u003c\/p\u003e\u003cp\u003eConnect microphones or line-level sources to the XLR\/TRS combo inputs, connect a stereo source to the 1\/8-inch input, or stream wirelessly over Bluetooth. Use the balanced XLR thru output to feed another speaker, and use a suitable speaker pole for the built-in bottom socket. For flown installation, use the integrated M10 points only with compatible M10 x 1.5 x 20 mm forged shoulder eyebolts and appropriate professional rigging practices.\u003c\/p\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":45669411127366,"sku":"THUMP210XT","price":399.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81KANRgSkSL_dc46ad1a-4596-4f6f-bd25-e03c27a12b86.jpg?v=1784499734"}],"url":"https:\/\/audiowatt.store\/collections\/black-friday-picks.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}