{"title":"Audison","description":null,"products":[{"product_id":"audison-af-c4-10-bit-4-channel-dsp-amplifier","title":"Audison AF C4.10 bit 4-Channel DSP Amplifier","description":"\u003cp\u003eThe Audison AF C4.10 bit is a compact four-channel car amplifier with an integrated 10-channel DSP platform. It is designed for systems that need both clean amplification and detailed signal tuning from one chassis. Four amplified channels power speakers directly, while six DSP-controlled preamp outputs support expansion with external amplifiers.\u003c\/p\u003e\u003cp\u003eRated at 90 watts RMS per channel at 4 ohms, the AF C4.10 bit is suited to actively powered front stages, upgraded door speakers, and multi-speaker OEM integration projects. It can also deliver 150 watts RMS per channel at 2 ohms. For higher-output applications, channel pairs may be bridged for 300 watts RMS x 2 at 4 ohms.\u003c\/p\u003e\u003cp\u003eThe built-in DSP operates at 24-bit\/96 kHz and supports an extended audio band reaching 40 kHz. Its processing tools include crossover filtering, equalization, time alignment, phase control, and real-time audio monitoring. This gives an installer the flexibility to tailor the system for vehicle acoustics and speaker placement.\u003c\/p\u003e\u003cp\u003eAudison D-Class amplification combines compact packaging with a rated 81% efficiency at rated power. The amplifier has a 10 Hz to 42 kHz bandwidth and a 0.03% THD figure at 1 kHz, 4 ohms, and 70% rated power. Its 600-watt total RMS capability provides useful headroom for a carefully matched speaker system.\u003c\/p\u003e\u003cp\u003eIntegration options include eight high-level inputs, eight low-level inputs, a TOSLINK optical S\/PDIF input, and six DSP preamp outputs. The high-level inputs support installation with many factory audio systems, while the optical input accepts stereo PCM signals up to 192 kHz\/24-bit. Optional expansion modules can add four high-level inputs or a second optical\/coaxial digital input.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel D-Class Amplifier:\u003c\/strong\u003e Delivers 90 watts RMS x 4 at 4 ohms or 150 watts RMS x 4 at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Channel DSP Platform:\u003c\/strong\u003e Combines four amplified outputs with six DSP-controlled preamp outputs for system expansion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Pairs channels 1\/2 and 3\/4 for 300 watts RMS x 2 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/96 kHz Processing:\u003c\/strong\u003e Provides high-resolution DSP processing with an audio band extending to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Signal Integration:\u003c\/strong\u003e Accepts speaker-level, RCA preamp-level, and optical S\/PDIF source signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Tuning Controls:\u003c\/strong\u003e Includes EQ, crossover, time alignment, phase adjustment, and RTA monitoring tools.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF C4.10 bit uses a compact D-Class platform measuring 200 x 134 x 47 mm and weighing 1.38 kg. Its integrated DSP and amplifier architecture helps reduce the number of separate components required in a tuned audio system. A built-in status logo indicates operating and protection conditions.\u003c\/p\u003e\u003cp\u003eProfessional installation is recommended because the amplifier requires correct power, ground, speaker, and source wiring as well as DSP configuration through Audison bit Drive software. Use it as a four-channel active amplifier, bridge it for a two-channel higher-power setup, or add external amplification through the six-channel DSP output. It includes cables for USB connection, control, DSP output, speaker output, preamp input, and speaker-level input.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614206648390,"sku":"AFC4-10BIT","price":1149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/615CVrN67tL.jpg?v=1784361120"},{"product_id":"audison-af-c4d-4-channel-class-d-amplifier","title":"Audison AF C4D 4-Channel Class D Amplifier","description":"\u003cp\u003eThe Audison AF C4D is a compact four-channel Class D amplifier designed to add clean, substantial power to an upgraded car audio system. It delivers 90 watts RMS to each of four 4-ohm channels, making it well suited to powering front and rear speakers or a fully active front stage. Its full-range output design also supports other system layouts when paired with appropriate external processing.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building a system around an Audison AF bit amplifier, a standalone DSP, or a compatible aftermarket head unit. It accepts both preamp-level and speaker-level signals, so it can be integrated with factory-source systems as well as aftermarket receivers. Included input and output harnesses help streamline the connection process.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the AF C4D provides 90 watts RMS per channel; at 2 ohms, it provides 150 watts RMS per channel. Each channel pair can also be bridged for 300 watts RMS into a 4-ohm load. This flexibility allows it to run four speakers, a front speaker pair plus a bridged subwoofer, or other processor-managed channel configurations.\u003c\/p\u003e\u003cp\u003eAudison D-Class technology uses a high switching frequency, steep output filtering, and tightly specified components to support wide-bandwidth performance in a compact amplifier. The AF C4D has a specified 10 Hz to 40 kHz bandwidth and is compatible with Hi-Res playback requirements. Its measured signal-to-noise ratio is rated at 102 dBA at 1 V.\u003c\/p\u003e\u003cp\u003eThe AF C4D uses a straight-wire architecture without built-in analog crossover filtering, placing crossover, equalization, and tuning duties with the connected DSP or source equipment. This makes it a practical companion for a properly configured external processor rather than a standalone tuning amplifier. Its compact 200 x 134 x 47 mm enclosure helps fit high-power amplification into space-conscious installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Amplified Channels:\u003c\/strong\u003e Supplies 90 watts RMS x 4 at 4 ohms for multi-speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Delivers 300 watts RMS x 2 at 4 ohms when bridged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Architecture:\u003c\/strong\u003e Provides efficient power delivery in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Bandwidth:\u003c\/strong\u003e Extends from 10 Hz to 40 kHz for wide-band playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-In And Speaker-In:\u003c\/strong\u003e Supports aftermarket RCA outputs and factory speaker-level signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal DSP Focus:\u003c\/strong\u003e Straight-wire design leaves crossover and tuning to external processing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF C4D is built in a compact, low-profile enclosure measuring 200 mm long, 134 mm wide, and 47 mm high. Its connection panel groups power, speaker-output, speaker-input, pre-input, level, remote, and optional remote-volume connections in one area. Status indicators provide power, clipping, thermal, load, voltage, and service information.\u003c\/p\u003e\u003cp\u003eInstall the amplifier with the supplied mounting screws in a secure location with suitable ventilation and use the specified 30 A fuse arrangement. It can receive a factory head unit's speaker-level signal through the included Speaker In harness or preamp signal through the included Pre In cables. Because the AF C4D has no adjustable crossover, use a DSP, processor, or source unit to establish crossover points and system tuning before operating speakers or subwoofers.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614207041606,"sku":"AFC4D","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71d8-AfiTiL.jpg?v=1784361165"},{"product_id":"audison-af-m1-7-bit-mono-dsp-amplifier","title":"Audison AF M1.7 bit Mono DSP Amplifier","description":"\u003cp\u003eThe Audison AF M1.7 bit is a mono Class D subwoofer amplifier with an integrated 7-channel digital signal processor. It is designed for adding controlled bass to factory or aftermarket audio systems while providing DSP tools for system integration and tuning. Its amplified output is dedicated to a subwoofer, while six DSP preamp outputs can support additional external amplifiers.\u003c\/p\u003e\u003cp\u003eWith 600 watts RMS at 4 ohms, 1000 watts RMS at 2 ohms, and 1200 watts RMS at 1 ohm, the AF M1.7 bit is suited to high-output subwoofer applications. The 1-ohm-stable mono channel gives installers flexibility when matching compatible single- or dual-voice-coil subwoofer loads. Its Class D design combines substantial subwoofer power with a compact chassis footprint.\u003c\/p\u003e\u003cp\u003eThe onboard 24-bit\/96 kHz DSP provides equalization, crossover selection, delay, level adjustment, routing, and mixing through Audison bit Drive software. Input and output real-time analysis tools help identify and align factory signal behavior before tuning. The processor also supports time alignment up to 15 ms and adjustable crossover frequencies from 20 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eFor factory-system upgrades, the amplifier accepts eight high-level or eight low-level inputs and includes Audison Universal Speaker Simulator circuitry for OEM integration. The optional F4IN expansion card adds four high-voltage analog inputs, bringing the high-level input total to twelve. An optical S\/PDIF input is built in, while the optional F2O card adds a second optical input and a coaxial S\/PDIF input.\u003c\/p\u003e\u003cp\u003eAudison-specific bass tools are included for shaping low-frequency performance in the vehicle cabin. Bass Magnification Processing is intended to improve perceived low-end response, while fixed and dynamic bass boost functions provide additional tuning options. The AF M1.7 bit can serve as an add-a-sub amplifier or as the DSP control center for a larger system using its six preamp outputs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1200W Mono Output:\u003c\/strong\u003e Delivers up to 1200 watts RMS into a 1-ohm load at 14.4V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-Channel DSP:\u003c\/strong\u003e Processes the subwoofer channel and six preamp output channels for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/96 kHz Processing:\u003c\/strong\u003e Provides high-resolution DSP control through Audison bit Drive software.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Input Integration:\u003c\/strong\u003e Supports eight high-level inputs with Universal Speaker Simulator circuitry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Magnification Processing:\u003c\/strong\u003e Adds a psychoacoustic bass-enhancement option for low-frequency tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable Connectivity:\u003c\/strong\u003e Optional F4IN and F2O cards extend analog or digital input capability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF M1.7 bit uses a compact Class D amplifier platform measuring 240 x 156 x 47 mm and weighing 1.95 kg. Its integrated DSP, native optical input, configurable control connections, and six preamp outputs consolidate subwoofer amplification and system processing in one component. The amplifier uses two 35A blade fuses and is rated for operation from 6.5 to 17.5 VDC.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a dry, ventilated location with a direct fused power connection and a low-resistance ground path. Match the connected subwoofer system to the amplifier's 1-ohm minimum load and configure routing, crossovers, delay, and EQ with a compatible Windows PC running bit Drive software. For factory systems with more than eight channels or high-voltage speaker outputs, consider the optional F4IN expansion card; optional DRC AC, DRC MP CAN, and B-CON accessories add external control or Bluetooth streaming capability.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614207565894,"sku":"AFM1-7BIT","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61hAi_ja2UL.jpg?v=1784361210"},{"product_id":"audison-afm1d-forza-class-d-mono-subwoofer-amplifier","title":"Audison AFM1D Forza Class D Mono Subwoofer Amplifier","description":"\u003cp\u003eThe Audison Forza AF M1D is a compact mono Class D amplifier designed to add dedicated subwoofer power to a car audio system. It delivers a single amplified channel with stable operation down to a 1-ohm load, making it suitable for a range of single- and dual-voice-coil subwoofer configurations. Its combination of low-level and high-level inputs supports both aftermarket and factory-source integration.\u003c\/p\u003e\u003cp\u003eFor systems that need stronger low-frequency output without adding excessive bulk, the AF M1D provides 600 watts RMS at 4 ohms, 1,000 watts RMS at 2 ohms, and 1,200 watts RMS at 1 ohm. These ratings are specified at 14.4 VDC and 1% THD. The mono layout keeps the amplifier focused on subwoofer duty while allowing the rest of the system to be powered separately.\u003c\/p\u003e\u003cp\u003eAudison uses its latest-generation D-Class technology in the AF M1D, with higher switching frequency operation, a fourth-order analog low-pass filtering approach, and high-tolerance components. The design is intended to keep switching noise away from the audible range while maintaining controlled bass reproduction. Its 10 Hz to 500 Hz bandwidth is tailored to low-frequency amplification and subwoofer system use.\u003c\/p\u003e\u003cp\u003eThe AF M1D can work as a companion amplifier in an Audison Forza bit system or as a standalone subwoofer amplifier. Manual controls include a selectable full-range or low-pass mode, adjustable low-pass filtering, phase adjustment, and adjustable 45 Hz bass boost. This gives an installer practical setup flexibility when adding bass to an existing system.\u003c\/p\u003e\u003cp\u003eFactory-radio upgrades are supported through speaker-level inputs, Universal Speaker Simulator loading, and ART automatic remote turn-on capability. Preamp inputs are also available for systems using an aftermarket receiver or processor. At 240 x 47 x 156 mm, the AF M1D is sized for installations where available amplifier space is limited.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMono Class D Output:\u003c\/strong\u003e Delivers dedicated power for a subwoofer channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Ohm Stable Design:\u003c\/strong\u003e Supports loads down to 1 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Inputs:\u003c\/strong\u003e Integrates with factory speaker-level audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Speaker Simulator:\u003c\/strong\u003e Helps maintain compatibility with OEM head units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Sets the subwoofer’s upper frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandalone Controls:\u003c\/strong\u003e Includes phase and bass-boost adjustment for setup flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF M1D uses a compact, installation-conscious chassis and Audison D-Class engineering that combines high power density with a 1.95 kg amplifier weight. High-tolerance components and fourth-order analog output filtering are part of its signal-stage design. The compact 240 x 47 x 156 mm dimensions make it practical for many concealed amplifier locations while still requiring suitable ventilation.\u003c\/p\u003e\u003cp\u003eUse the AF M1D with a subwoofer system presenting a final impedance no lower than 1 ohm, and match the wiring arrangement to the amplifier’s rated output at that load. It accepts RCA preamp signals or speaker-level signals, allowing integration with aftermarket receivers, factory radios, or a separate processor. The supplied labeled speaker-output cable supports connection of a single-voice-coil or dual-voice-coil subwoofer, or two subwoofers; professional installation is recommended for power, grounding, fuse protection, and gain setup.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614210678854,"sku":"AFM1D","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pGqsRQ_aL.jpg?v=1784361258"},{"product_id":"audison-af-m4d-4-channel-class-d-amplifier","title":"Audison AF M4D 4-Channel Class D Amplifier","description":"\u003cp\u003eThe Audison AF M4D is a four-channel Class D car amplifier designed to add clean, substantial power to a processor-based audio system. It delivers 160 watts RMS to each of four 4-ohm channels, making it suitable for actively powered front stages, component speakers, or front-and-rear speaker systems. Its compact footprint helps bring higher-output amplification to installations where available mounting space is limited.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for enthusiasts building a system around an Audison Forza AF bit amplifier or a standalone signal processor. Its straight-wire architecture omits onboard analog crossover controls, allowing the external processor to manage crossover points, equalization, time alignment, and routing. That approach makes the AF M4D especially appropriate for precisely tuned active systems.\u003c\/p\u003e\u003cp\u003eAt 2 ohms, the AF M4D provides 260 watts RMS per channel, while each channel pair can be bridged to supply 520 watts RMS at 4 ohms. This gives installers flexibility to power four speakers individually or use two bridged channels for higher-power applications. Minimum impedance is 2 ohms in four-channel operation and 4 ohms when bridged.\u003c\/p\u003e\u003cp\u003eAudison D-Class technology uses higher switching frequency operation and a fourth-order analog low-pass filter design. The amplifier has a 10 Hz to 42 kHz bandwidth and is specified for Hi-Res compatibility through its extended high-frequency response. With 83% efficiency, it is engineered to deliver its rated output while managing power use in a compact amplifier format.\u003c\/p\u003e\u003cp\u003eBoth low-level preamp and high-level speaker inputs are provided for integration with aftermarket or factory audio sources. The high-level input section includes Audison Universal Speaker Simulator technology for compatibility with OEM head units. A supplied signal-input harness supports connection with compatible AF bit amplifiers, while an optional AF Link cable can connect AF bit DSP outputs to the amplifier's pre-in inputs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Channel RMS Power:\u003c\/strong\u003e Delivers 160 watts RMS per channel at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Produces 260 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Supplies 520 watts RMS x 2 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Bandwidth:\u003c\/strong\u003e Covers 10 Hz to 42 kHz for wide-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor-Oriented Architecture:\u003c\/strong\u003e Works with external DSP crossover and tuning controls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Integrates with factory or aftermarket source units.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF M4D uses a compact Class D amplifier chassis measuring 240 x 156 x 47 mm and weighing 2.04 kg. Its design centers on externally managed signal processing rather than onboard analog filters. The amplifier includes two 30-amp fuses and is specified for 83% efficiency.\u003c\/p\u003e\u003cp\u003eUse the pre-in connection with an aftermarket source or DSP pre-outs, or use the speaker-in connection when retaining a factory head unit. Plan the system with an external processor when crossover filtering, equalization, or time alignment is needed, because the AF M4D does not include an adjustable crossover. For bridged use, connect only a 4-ohm load to channel pairs 1\/2 or 3\/4 and follow the manufacturer's wiring guidance.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614211760198,"sku":"AFM4D","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61zaedmKIcL.jpg?v=1784361299"},{"product_id":"audison-af-m5-11-bit-5-channel-dsp-amplifier","title":"Audison AF M5.11 bit 5-Channel DSP Amplifier","description":"\u003cp\u003eThe Audison AF M5.11 bit is a five-channel Class D amplifier with an integrated 11-channel digital signal processor for building a refined, space-conscious car audio system. It combines four full-range amplified channels with a dedicated subwoofer channel, making it suitable for powering front and rear speakers plus a subwoofer from one chassis. Its built-in DSP is designed to help correct, route, equalize, and time-align signals from factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the amplifier delivers 100 watts RMS to each of four channels plus 400 watts RMS to the subwoofer channel. At 2 ohms, it delivers 150 watts RMS to each of four channels plus 600 watts RMS to the subwoofer channel. This gives installers flexibility to match common component speakers, coaxial speakers, and appropriately impedance-matched subwoofers.\u003c\/p\u003e\u003cp\u003eThe AF M5.11 bit uses Audison D-Class technology and a 24-bit\/96 kHz DSP platform with an audio bandwidth extending to 42 kHz. Its low 0.02% THD specification at 1 kHz, 4 ohms, and 70% rated power supports a clean signal foundation for a properly configured system. The DSP offers crossover, equalization, phase, delay, and real-time audio-monitoring tools for detailed system calibration.\u003c\/p\u003e\u003cp\u003eFactory-system integration is a central part of this amplifier's design. It includes eight high-level inputs, eight low-level inputs, and optical digital input capability, while electrical signal analysis can assist with input correction. Universal Speaker Simulator technology on the high-level inputs is intended to support compatibility with OEM head units.\u003c\/p\u003e\u003cp\u003eFor expansion, the AF M5.11 bit provides six DSP-controlled pre-outs in addition to its five amplified channels. Its first and second channel pairs can be bridged for higher-power full-range applications, while the dedicated fifth channel remains available for subwoofer duty. This makes it a practical foundation for active front-stage systems, full five-channel upgrades, or systems that may later add external amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive Amplified Channels:\u003c\/strong\u003e Powers four speakers and one subwoofer from a single amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 11-Channel DSP:\u003c\/strong\u003e Provides routing, tuning, crossover, EQ, and delay control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Channels 1\/2 and 3\/4 can drive higher-power loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Input Integration:\u003c\/strong\u003e Eight speaker-level inputs accommodate many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Digital Input:\u003c\/strong\u003e Accepts a TOSLINK S\/PDIF source up to 192 kHz\/24-bit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix DSP Pre-Outs:\u003c\/strong\u003e Supports adding external amplifiers for system expansion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF M5.11 bit uses a compact amplifier enclosure measuring 240 x 156 x 47 mm and weighing 2.04 kg. Its design combines amplification and DSP processing in one unit, reducing the number of separate components required in a system. Supplied labeled speaker-output cables support organized connection of the amplified outputs.\u003c\/p\u003e\u003cp\u003eProfessional installation and DSP tuning are recommended, particularly when integrating a factory radio or configuring bridged channels. Use speakers and subwoofers that meet the amplifier's stated minimum impedance requirements, and provide fused 12-volt power, ground, remote-turn-on wiring, and appropriate signal connections. A Windows 10 or Windows 11 computer and Micro USB connection are used for setup through Audison bit Drive software.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614215790662,"sku":"AFM5-11BIT","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61jnqaYCEsL.jpg?v=1784361636"},{"product_id":"audison-af-m6d-6-channel-class-d-amplifier","title":"Audison AF M6D 6-Channel Class D Amplifier","description":"\u003cp\u003eThe Audison AF M6D is a compact six-channel Class D amplifier designed to add clean, high-output amplification to a processor-based car audio system. It provides six full-range channels for active front stages, front-and-rear speaker systems, or other multi-channel layouts. Its straight-wire architecture is intended for systems where signal processing and crossover duties are handled externally.\u003c\/p\u003e\u003cp\u003eRated at 135 watts RMS per channel at 4 ohms or 220 watts RMS per channel at 2 ohms, the AF M6D supplies substantial power across all six channels. Each channel pair can also be bridged, producing three channels of 440 watts RMS at 4 ohms. This gives installers flexibility when combining component speakers and subwoofer channels in the same system.\u003c\/p\u003e\u003cp\u003eAudison D-Class technology uses a high switching frequency, steep output filtering, and tightly specified components. The design supports a wide 10 Hz to 42 kHz bandwidth and Hi-Res compatibility. With a specified 103 dBA A-weighted signal-to-noise ratio, the amplifier is engineered for low-noise integration with quality source and processor components.\u003c\/p\u003e\u003cp\u003eThe AF M6D accepts both low-level preamp and high-level speaker inputs, making it suitable for aftermarket radios, factory head units, and dedicated DSP processors. Its high-level inputs incorporate Audison Universal Speaker Simulator technology for compatibility with OEM source units. There is no digital input and no adjustable onboard crossover, so system tuning should be planned through an external processor or source component.\u003c\/p\u003e\u003cp\u003eForza companion amplifiers are particularly suited to expanding Audison AF bit DSP amplifier systems through the optional AF Link cable. The compact 240 x 156 x 47 mm enclosure helps conserve installation space while delivering up to 1,320 watts RMS total output at 2 ohms. A supplied signal and speaker-output cable set helps streamline integration into a multi-channel installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix Amplified Channels:\u003c\/strong\u003e Powers six speakers independently for flexible multi-channel system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully Bridgeable Pairs:\u003c\/strong\u003e Bridges channel pairs 1\/2, 3\/4, and 5\/6 for higher-power applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudison D-Class Technology:\u003c\/strong\u003e Uses high-frequency switching and steep filtering for wide-bandwidth amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Compatible Bandwidth:\u003c\/strong\u003e Extends to 42 kHz for high-resolution audio system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Connects with factory speaker outputs or aftermarket preamp outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal-Processor Architecture:\u003c\/strong\u003e Omits onboard crossover controls for systems managed by external processing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF M6D uses a compact amplifier chassis measuring 240 x 156 x 47 mm and weighing 1.95 kg. Audison specifies an 81% efficiency rating and a power-to-volume figure of up to 0.68 W RMS\/cm³. The manufacturer does not specify the chassis material, but the design is intended to place six channels of amplification in a space-conscious format.\u003c\/p\u003e\u003cp\u003eInstall the AF M6D with a 12-volt vehicle electrical system, observing its 11 to 15 VDC supply specification and dual 35 A fuse requirement. It can be fed by a head unit pre-out, factory speaker outputs, a standalone DSP, or an Audison AF bit DSP amplifier; external crossover and tuning functions are required where needed. Leave ventilation space around the amplifier, especially in enclosed mounting locations; Audison offers the optional AFM-CLK cooling accessory for tight spaces with limited airflow.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614216249414,"sku":"AFM6D","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61-Iwh7sdjL.jpg?v=1784361680"},{"product_id":"audison-afm8-14bit-8-channel-dsp-amplifier","title":"Audison AFM8-14BIT 8-Channel DSP Amplifier","description":"\u003cp\u003eThe Audison AF M8.14 bit is an eight-channel Class D amplifier with a 14-channel DSP platform for building and tuning multi-speaker vehicle audio systems. It combines eight amplified outputs with six processed preamp outputs, allowing the system to grow beyond the channels powered by the amplifier itself. It is designed for installers and enthusiasts upgrading either a factory or aftermarket source unit.\u003c\/p\u003e\u003cp\u003eAt 14.4 VDC, the amplifier delivers 90 watts RMS to each of eight 4-ohm channels or 140 watts RMS to each of eight 2-ohm channels, with all channels driven. Channel pairs can also be bridged to produce 280 watts RMS x 4 at 4 ohms. This makes it suitable for active front-stage, rear-fill, and multi-way speaker configurations when matched to compatible speakers.\u003c\/p\u003e\u003cp\u003eThe integrated DSP operates at 24-bit\/96 kHz and provides adjustable crossover, equalization, time alignment, phase control, routing, and real-time audio monitoring. Its output processing includes a 15-pole parametric or graphic biquad equalizer per output, while the analog input section provides 12 biquad bands plus delay. These tools allow an installer to correct source signals and tailor each speaker channel to the vehicle.\u003c\/p\u003e\u003cp\u003eFor factory-system integration, the AF M8.14 bit accepts eight high-level or low-level analog input channels and supports an optical S\/PDIF digital input. It also includes OEM-oriented signal-correction functions including de-EQ, de-Time, de-Phase, electrical signal analysis, and Universal Speaker Simulator compatibility. An optional F4IN board can add four high-level analog inputs, while the optional F2O board adds a coaxial S\/PDIF or second TOSLINK input.\u003c\/p\u003e\u003cp\u003eThe amplifier can serve as the main controller in a larger Audison Forza system. Its six DSP-controlled preamp outputs can feed companion amplifiers for additional speaker or subwoofer channels. Configuration and tuning are handled through Audison bit Drive software using a Micro USB connection to a compatible Windows computer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight Amplified Channels:\u003c\/strong\u003e Delivers 90 W RMS x 8 at 4 ohms or 140 W RMS x 8 at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e14-Channel DSP Platform:\u003c\/strong\u003e Controls eight amplified outputs plus six processed preamp outputs for expandable system design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Channel Pairs:\u003c\/strong\u003e Pairs 1\/2, 3\/4, 5\/6, and 7\/8 can provide 280 W RMS x 4 at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM And Aftermarket Inputs:\u003c\/strong\u003e Supports eight high-level inputs, eight low-level inputs, and optical S\/PDIF digital input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced DSP Tuning:\u003c\/strong\u003e Provides crossovers, EQ, delay, phase adjustment, all-pass filters, and RTA monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion-Ready Connectivity:\u003c\/strong\u003e Six preamp outputs and optional input cards support larger and more complex audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AF M8.14 bit uses a compact 240 x 47 x 156 mm chassis and a Class D amplifier stage rated at 82% efficiency. Audison supplies six connection cables, each with a protective printed strip near its Molex connector to improve resistance to torsion. The supplied harnesses provide organized connections for speaker-level input, RCA input, speaker output, DSP output, control functions, and PC setup.\u003c\/p\u003e\u003cp\u003eInstall the amplifier where it is protected and where airflow is available, using the specified 2 x 30 A fuse requirement and a stable 6.5 to 15 VDC supply. Use the included Speaker-In harness for factory speaker-level outputs or the included Pre-In harness for an aftermarket source with RCA pre-outs. DSP configuration requires a Windows 10 or Windows 11 computer, bit Drive software, and the included USB cable; optional Audison remote controls connect through the DRC port.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614216642630,"sku":"AFM8-14BIT","price":1699.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61xks_QISML.jpg?v=1784361725"},{"product_id":"audison-ap1p-1-14-tweeter-component-with-crossover","title":"Audison AP1P 1.14\" Tweeter Component with Crossover","description":"\u003cp\u003eThe Audison AP1P is a 29 mm (1.14 in.) car-audio tweeter component designed to add focused high-frequency reproduction to a component speaker system. It is intended for factory-system upgrades and custom installations where fitment flexibility is important. The supplied APCX P 2T passive crossover provides the required high-pass filtering for the tweeter.\u003c\/p\u003e\u003cp\u003eWith an 8-ohm nominal impedance and 92 dB sensitivity, the AP1P is engineered for integration with compatible component-system amplification and crossover networks. Its published frequency response extends from 1.2 kHz to 25 kHz. A Tetolon fibre dome and 25 mm CCAW voice coil support detailed upper-frequency output with low moving mass.\u003c\/p\u003e\u003cp\u003eAudison uses a double-Neodymium magnetic group in the AP1P motor assembly. This design is paired with a dome profile optimized through FEM simulations for broad off-axis dispersion. That makes the tweeter well suited to locations such as factory sail panels, dash positions, and A-pillars where listening angles can vary.\u003c\/p\u003e\u003cp\u003eAIF, or Any Install Faceplate, gives the AP1P three faceplate options for different installation approaches. The OEM faceplate supports factory-style placement, while mesh and spoke grille options are intended for A-pillar applications. This flexibility helps an installer select a finish and protection level appropriate to the mounting location.\u003c\/p\u003e\u003cp\u003eThe included APCX P 2T crossover is a 12 dB\/octave high-pass network with a 4 kHz crossover point. Its selectable tweeter-level setting offers 0 dB or +3 dB adjustment for system tuning. The AP1P is a practical match for a compatible midrange or woofer section in an Audison Prima-style two-way front-stage upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tweeter:\u003c\/strong\u003e Compact 1.14-inch format supports flexible vehicle placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplates:\u003c\/strong\u003e Three faceplate styles accommodate OEM and custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Neodymium Motor:\u003c\/strong\u003e Supports extended high-frequency performance in a compact assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Lightweight coil construction supports dynamic high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fibre Dome:\u003c\/strong\u003e Dome material is designed for accurate upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX P 2T Crossover:\u003c\/strong\u003e Included high-pass network provides 4 kHz, 12 dB\/octave filtering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP1P combines a Tetolon fibre dome, 25 mm CCAW voice coil, and double-Neodymium magnetic group in a compact tweeter assembly. Its faceplate system includes OEM, mesh-grille, and spoke-grille options, allowing the cosmetic finish and acoustic opening to be matched to the mounting position. Audison specifies a 22 x 2.5 mm Neodymium magnet size and a tweeter weight of 0.067 kg.\u003c\/p\u003e\u003cp\u003eUse the AP1P with its supplied APCX P 2T passive crossover rather than connecting it directly to a full-range signal. The crossover is specified as a 4 kHz, 12 dB\/octave high-pass design and provides 0 dB or +3 dB tweeter-level adjustment. Confirm available mounting clearance against the listed AP1P and faceplate dimensions, and use the supplied mounting hardware appropriate to the selected OEM, flush, or angled installation method.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217003078,"sku":"AP1P","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UD2jVAaHL.jpg?v=1784361764"},{"product_id":"audison-ap-2-mv-2-wide-range-speakers","title":"Audison AP 2 MV 2\" Wide-Range Speakers","description":"\u003cp\u003eThe Audison AP 2 MV is a compact 2-inch wide-range speaker designed for OEM dashboard and A-pillar locations. It is intended to reproduce both midrange and high-frequency content from a single small driver, helping move the front soundstage higher in the vehicle. This makes it a practical solution for vehicles with limited factory speaker space.\u003c\/p\u003e\u003cp\u003eRather than functioning as a conventional tweeter alone, the AP 2 MV covers a broad 150 Hz to 20 kHz operating range. Its wide-band capability can reduce the need for a crossover point between separate midrange and tweeter drivers in the upper-frequency range. The result is suited to installations seeking coherent vocals, instruments, and high-frequency detail from a compact OEM-style location.\u003c\/p\u003e\u003cp\u003eThe AP 2 MV uses a 25 mm CCAW double-layer voice coil to support its 25 W continuous and 50 W peak power ratings. Its low 145 Hz resonance frequency is notable for a 50 mm driver and supports integration with a door woofer at an appropriate crossover point. With a 4-ohm nominal impedance, it is designed for use in compatible factory-replacement and aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eAn aluminum cone and copper shorting ring are used to support extended high-frequency response and impedance control. The compact motor incorporates a symmetrical double-neodymium magnetic assembly for controlled excursion in a shallow package. These engineering details allow the driver to fit where a larger midrange speaker may not be practical.\u003c\/p\u003e\u003cp\u003eAudison includes a multi-tab OEM adapter intended to support direct replacement in many General Motors, Toyota, and Mercedes applications. The AP 2 MV can also be used as a midrange in a three-way system, or as a surround or center-channel speaker where space is restricted. Confirm the factory opening, mounting depth, wiring connection, and system crossover settings before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-Range Response:\u003c\/strong\u003e Covers 150 Hz to 20 kHz from one compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Inch OEM Format:\u003c\/strong\u003e Fits many 50 mm dashboard and A-pillar locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm CCAW Voice Coil:\u003c\/strong\u003e Supports power handling and low-frequency extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Cone:\u003c\/strong\u003e Provides a rigid diaphragm for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Shorting Ring:\u003c\/strong\u003e Helps flatten impedance for extended high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Adapter Included:\u003c\/strong\u003e Supports installation in many GM, Toyota, and Mercedes vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 2 MV combines an aluminum cone, copper shorting ring, 25 mm CCAW double-layer voice coil, and neodymium magnetic motor in a compact basket. Its symmetrical double-neodymium magnet assembly is designed for excursion control while preserving the shallow dimensions needed for OEM-oriented installations. Each component weighs 0.15 kg.\u003c\/p\u003e\u003cp\u003eUse the supplied multi-tab adapter only after confirming its fit with the specific vehicle and factory speaker location. The speaker is suited to 50 mm OEM dash or A-pillar positions, and may also be used as a three-way midrange, surround speaker, or center-channel driver. Match it to a compatible 4-ohm audio channel and configure crossover settings appropriate to the rest of the system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217330758,"sku":"AP2MV","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ObkiJbv0L.jpg?v=1784361799"},{"product_id":"audison-ap-4-4-midrange-speakers","title":"Audison AP 4 4\" Midrange Speakers","description":"\u003cp\u003eThe Audison AP 4 is a pair of 4-inch car-audio midbass\/midrange drivers designed for factory-location upgrades where space is limited. Their compact format and shallow installation profile help address fitment challenges in many OEM speaker positions. They are intended for listeners building a more detailed front stage or replacing small factory drivers.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 40-watt continuous power handling, and 91 dB sensitivity, the AP 4 is suited to compatible factory-power and amplified systems. Its 80 Hz to 7.5 kHz frequency response covers a broad midbass and midrange range for a driver of this size. The sound-oriented design focuses on clear, balanced reproduction through the vocal and upper-midrange region.\u003c\/p\u003e\u003cp\u003eA 25 mm pure-copper voice coil supports controlled performance through the mid-high frequencies. The cone is engineered to provide a calibrated mechanical low-pass behavior, so Audison states that a passive crossover is not required to maximize driver efficiency. This makes the AP 4 a practical option for system designs that need a dedicated small-format midrange or midbass driver.\u003c\/p\u003e\u003cp\u003eThe water-repellent treated paper cone uses a profile developed with FEM simulation and optimized with Klippel Scan Vibrometer measurement. Its shallow Triple Wave TPU surround is designed to support linear excursion. Together, these elements support a compact driver intended for accurate output in OEM-style mounting locations.\u003c\/p\u003e\u003cp\u003eThe AP 4 can be used as part of a component-based car-audio upgrade with appropriate system tuning and amplification. It is supplied as a pair, allowing installation across left and right speaker locations. Confirm the vehicle's opening diameter, mounting depth, wiring polarity, and available signal range before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Inch Driver Size:\u003c\/strong\u003e Fits applications designed for 100 mm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Handling:\u003c\/strong\u003e Supports power-matched factory or amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Copper Voice Coil:\u003c\/strong\u003e Helps maintain balanced mid-high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a treated paper cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Supports linear cone excursion in a shallow profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Low-Pass Behavior:\u003c\/strong\u003e Reduces the need for a passive crossover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 4 uses a water-repellent treated paper cone, a 25 mm pure-copper voice coil, and a thermoplastic polyurethane surround with Audison's shallow Triple Wave profile. Its compact basket has an abrasion-resistant, scratch-resistant coating. The driver has a nominal 100 mm diameter, a 103 mm outer diameter, and a 0.4 kg listed weight.\u003c\/p\u003e\u003cp\u003eCheck for a 93 mm installation opening and approximately 41 mm of mounting-depth clearance before purchase; the manufacturer also lists a 43 mm overall depth dimension. Use the pair in matching left\/right locations with a compatible 4-ohm signal path and power source. APG 4 protective grilles are listed by Audison as an optional accessory rather than a confirmed included item.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217625670,"sku":"AP4","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71nDD8nYniL.jpg?v=1784361841"},{"product_id":"audison-ap-5-5-25-midbass-speakers","title":"Audison AP 5 5.25\" Midbass Speakers","description":"\u003cp\u003eThe Audison AP 5 is a pair of 130 mm (5-inch nominal) Prima Series component woofers designed for factory-speaker replacement and custom car-audio upgrades. It provides a compact 4-ohm midbass solution for vehicles with limited mounting depth. Its 70 Hz to 5 kHz operating range supports focused midbass and lower-midrange reproduction.\u003c\/p\u003e\u003cp\u003eWith 50 W continuous power handling and 150 W peak power handling, the AP 5 is suited to systems using a compatible factory radio or external amplifier. Its 93 dB sensitivity helps it work efficiently in OEM-style locations. The 4-ohm nominal impedance is compatible with many conventional car-audio amplifier channels.\u003c\/p\u003e\u003cp\u003eA 32 mm pure-copper voice coil is used to support power handling and low-frequency control. The water-repellent treated paper cone uses a profile developed with FEM simulation and optimized with Klippel R\u0026amp;D Scan Vibrometer testing. This construction is intended to maintain controlled response through the speaker's rated operating range.\u003c\/p\u003e\u003cp\u003eThe AP 5 uses a shallow Triple Wave TPU surround to support linear cone excursion. Its cone profile is engineered for a calibrated mechanical low-pass roll-off, so Audison specifies that no passive crossover is required for the woofer itself. This makes it appropriate for installations where a separate tweeter and system-level frequency management are selected to suit the vehicle.\u003c\/p\u003e\u003cp\u003eA compact, abrasion-resistant basket and reduced mounting depth help the AP 5 fit many OEM speaker locations. High-current fast-on terminals provide double contacts on both positive and negative poles for connection flexibility. Use the AP 5 as part of a properly matched front-stage, rear-fill, or multiway speaker upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e130 mm Woofer:\u003c\/strong\u003e Compact size for many factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 W Continuous Rating:\u003c\/strong\u003e Supports appropriately matched amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm Copper Voice Coil:\u003c\/strong\u003e Helps provide controlled midbass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a treated cone material for automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Supports linear cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Low-Pass Design:\u003c\/strong\u003e No passive woofer crossover is specified.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 5 combines a water-repellent treated paper cone, a 32 mm pure-copper voice coil, and a TPU Triple Wave surround. Its compact basket has an abrasion-resistant, scratch-resistant coating, while the motor is secured with damping epoxy adhesive. A temperature-resistant plastic terminal cover helps protect against accidental short circuits.\u003c\/p\u003e\u003cp\u003eConfirm available opening diameter, mounting depth, and panel clearance before installation. The manufacturer lists a 119 mm mounting cutout dimension and 48.5 mm mounting depth dimension; use suitable adapters, hardware, and wiring for the vehicle as needed. For a full-range front system, pair these woofers with compatible tweeters and configure the system's crossover or DSP settings appropriately.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614217986118,"sku":"AP5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Kf747uLKL.jpg?v=1784361883"},{"product_id":"audison-ap-6-5-6-5-prima-series-woofers","title":"Audison AP 6.5 6.5\" Prima Series Woofers","description":"\u003cp\u003eThe Audison AP 6.5 is a pair of 165 mm (6.5-inch) Prima Series woofers designed for vehicle speaker upgrades where factory locations and practical mounting depth matter. With a 4-ohm nominal impedance and 70 watts continuous power handling, they are suited to replacing compatible door or rear-deck midbass drivers. Their compact installation profile helps support OEM-style integration without requiring an oversized speaker location.\u003c\/p\u003e\u003cp\u003eThese woofers are intended for listeners building a more detailed and controlled front-stage or full-range speaker system. The 60 Hz to 5 kHz operating range supports midbass and midrange duties, while the 93.5 dB sensitivity helps them deliver useful output from modestly powered systems. They can be used in an upgrade path with compatible tweeters, amplification, and system tuning selected for the vehicle.\u003c\/p\u003e\u003cp\u003eA 32 mm pure-copper voice coil is used to support power handling and low-frequency control. The water-repellent treated paper cone has a profile developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer testing. This engineering is intended to provide a controlled mechanical low-pass characteristic without a passive filter fitted to the woofer itself.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 uses a TPU surround with Audison's shallow Triple Wave profile, designed to maintain excursion linearity. Its high-density-flux ferrite motor, compact basket, and damping epoxy-secured motor structure support a durable installation in a vehicle environment. The design is focused on a direct-fit-oriented speaker upgrade rather than a large custom build.\u003c\/p\u003e\u003cp\u003eFor system planning, match the AP 6.5 with a compatible 4-ohm amplifier channel or head-unit output and allow for its 56 mm mounting-depth dimension. The woofer is supplied as a pair, while protective grilles are not included. Audison offers the APG 6.5 grille set separately for installations where exposed-driver protection is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits many common 6.5-inch vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 W Continuous Power:\u003c\/strong\u003e Supports amplifier-matched system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm Copper Voice Coil:\u003c\/strong\u003e Helps provide controlled low-frequency performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Suits the changing conditions inside vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Designed for linear cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Mounting Depth:\u003c\/strong\u003e Helps fit constrained OEM speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 combines a water-repellent treated paper cone, TPU Triple Wave surround, high-density-flux ferrite magnet, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The speaker terminals use high-current fast-on connections with double contacts for both positive and negative poles, plus temperature-resistant covers to help protect against accidental short circuits.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's available opening and depth with the AP 6.5 dimensions: 165 mm overall diameter, 141 mm mounting cutout reference, and 56 mm mounting-depth reference. Use correct polarity at the marked terminals and select amplification appropriate for a 4-ohm speaker rated at 70 watts continuous power. For exposed installations, plan for separately available Audison APG 6.5 protective grilles.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218412102,"sku":"AP6-5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zYDg-5m1L.jpg?v=1784361935"},{"product_id":"audison-ap-6-5p-6-5-component-woofer-pair","title":"Audison AP 6.5P 6.5\" Component Woofer Pair","description":"\u003cp\u003eThe Audison AP 6.5P is a pair of 165 mm (6.5-inch) component woofers designed for upgrading factory door-speaker locations. It is intended for listeners who want stronger midbass capability and greater power handling than typical OEM speakers can provide. Its compact format supports installations where available depth and mounting space are limited.\u003c\/p\u003e\u003cp\u003eWith 110 W continuous and 330 W peak power handling per speaker, the AP 6.5P is suited to systems using an external amplifier as well as carefully configured factory-system upgrades. Its 4-ohm nominal impedance makes it compatible with many conventional car-audio amplifier channels. The 92.5 dB sensitivity specification supports efficient output from an appropriately matched system.\u003c\/p\u003e\u003cp\u003eThe woofer uses a 32 mm Copper-Clad Aluminum Wire voice coil to manage higher applied power while keeping moving mass controlled. Audison specifies 5.6 mm Xmax for increased cone travel during dynamic passages. The result is a woofer engineered for controlled midbass response and dependable operation within its rated range.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone provides the diaphragm material, while the magnetic assembly is sized to help maintain cone control at high excursion. The basket was engineered to reduce airflow resistance while retaining a compact shape. These design choices support use in OEM-style door locations where installation clearance is an important consideration.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P is a woofer component rather than a complete coaxial speaker, making it a practical foundation for a custom component system. It can be paired with compatible tweeters, crossover networks, amplification, and sound treatment based on the vehicle and installation goals. For a front-stage upgrade, confirm fitment, available mounting depth, and the crossover plan before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits the common 6.5-inch speaker class for many door-speaker upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 W Continuous Handling:\u003c\/strong\u003e Supports use with appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm CCAW Voice Coil:\u003c\/strong\u003e Helps manage power while supporting controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Excursion:\u003c\/strong\u003e Rated at 5.6 mm Xmax for handling demanding dynamic peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Water-repellent cone material is suited to automotive-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Basket:\u003c\/strong\u003e Designed to ease installation in OEM-style speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P combines a water-repellent treated paper cone, 32 mm CCAW voice coil, compact basket, and substantial magnetic assembly. Audison designed the basket to lower airflow resistance while preserving a compact installation profile. Each speaker has a specified weight of 1.45 kg.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and panel clearance before ordering or installation. The manufacturer lists a 165 mm overall diameter, 141 mm mounting-hole diameter, 75 mm total depth, and 66.5 mm mounting depth. Because this is a woofer component, use suitable high-pass and low-pass filtering, and select compatible tweeters and crossovers when building a component system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218805318,"sku":"AP6-5P","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618Ch2qrJ1L.jpg?v=1784361979"},{"product_id":"audison-ap8-8-woofer-pair","title":"Audison AP8 8\" Woofer Pair","description":"\u003cp\u003eThe Audison AP8 is an 8-inch, 4-ohm Prima Series woofer designed for vehicle locations that use an 8-inch OEM woofer. It is intended to add capable low-frequency and midbass output in factory-style speaker positions without requiring a deep driver. Its broad 200 mm cone area helps it suit upgrades where space limits the use of a separate subwoofer.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power, the AP8 is built for use in properly matched amplified car-audio systems. Its 93.5 dB sensitivity supports efficient output from compatible amplification. The stated 35 Hz to 3 kHz frequency response gives it a useful operating range for dedicated woofer duties.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone forms the basis of the AP8's acoustic design. Audison specifies a cone profile developed through FEM simulation and optimized with Klippel Scan Vibrometer measurements. A shallow TPU Triple Wave surround is used to support controlled cone travel and excursion linearity.\u003c\/p\u003e\u003cp\u003eThe AP8 uses a 25 mm voice coil and a high-density-flux ferrite motor assembly. Its mechanical low-pass behavior is designed so a passive crossover is not required to maximize woofer efficiency. This makes the driver especially relevant in OEM-integration installations where packaging and connection simplicity matter.\u003c\/p\u003e\u003cp\u003eWith a 174 mm mounting cutout and 66 mm mounting depth, the AP8 is intended for relatively shallow factory woofer locations. Dual-contact positive and negative fast-on terminals provide connection flexibility at the speaker. It can be used as part of a larger Prima upgrade with compatible amplification, signal processing, and higher-frequency speakers selected for the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Woofer:\u003c\/strong\u003e Fits applications designed around 200 mm OEM woofer locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports properly matched amplified system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm-rated car audio amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Provides a treated cone for automotive speaker use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Supports controlled excursion in a shallow-profile design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Contact Fast-On Terminals:\u003c\/strong\u003e Allows flexible, quick speaker-wire connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP8 combines a water-repellent treated paper cone, TPU surround, 25 mm voice coil, and high-density-flux ferrite magnet. Its compact basket has an abrasion-resistant, scratch-resistant coating, while the motor is secured with damping epoxy adhesive. A temperature-resistant plastic terminal cover helps protect the connections against accidental short circuits.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before installation: the technical drawing lists a 174 mm cutout dimension and 66 mm mounting-depth dimension. Use appropriate speaker wiring and a compatible 4-ohm amplifier channel, then set amplifier gain and filtering for the installed system. The manufacturer notes a grille is included; confirm vehicle-specific mounting hardware and adapter requirements separately.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219165766,"sku":"AP8","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81WnJItlBxL.jpg?v=1784362025"},{"product_id":"audison-apbmwk4e-4-bmw-mini-2-way-component-speakers","title":"Audison APBMWK4E 4\" BMW-Mini 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APBMW K4E is a 4-inch, two-way component speaker kit engineered for select BMW and MINI vehicles with factory two-way audio systems. It combines a 100 mm midrange driver, a separate 29 mm tweeter, and a dedicated crossover network. The kit is designed around BMW-MINI compatible mounting and Plug \u0026amp; Play connections.\u003c\/p\u003e\u003cp\u003eThis system is intended for owners replacing factory front mid-high speakers while retaining an OEM-style installation approach. Its LargeBasket configuration uses an aluminum die-cast basket designed for compatible BMW-MINI mounting locations. Vehicle-specific fitment should be verified before purchase.\u003c\/p\u003e\u003cp\u003eThe 100 mm midrange uses a water-repellent pressed-paper cone for natural midrange reproduction. Its 90 Hz resonance frequency supports high-pass filtering in the 150-200 Hz range when used in an appropriately configured system. The published system frequency response is 90 Hz to 23 kHz.\u003c\/p\u003e\u003cp\u003eA 29 mm Tetolon tweeter handles the upper-frequency range and uses a 25 mm voice coil. Its off-axis dispersion characteristics were optimized using FEM simulations, helping suit OEM tweeter positions that are not directly aimed at the listener. The supplied crossover provides a 6 kHz high-pass section at 6 dB per octave.\u003c\/p\u003e\u003cp\u003eWith 50 W continuous and 100 W peak power handling at 4 ohms, the APBMW K4E can be used as part of a factory-speaker replacement or a more extensive BMW-MINI audio upgrade. Plug \u0026amp; Play connectors, a supplied tweeter support, and a 30 cm extension cable simplify integration with compatible factory locations. It can also be paired with compatible Audison BMW underseat subwoofer solutions when a broader system upgrade is planned.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW-MINI Two-Way Design:\u003c\/strong\u003e Built for select factory two-way BMW and MINI speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Pressed-Paper Midrange:\u003c\/strong\u003e Water-repellent cone supports natural midrange character.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Separate tweeter extends response through the high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Connections:\u003c\/strong\u003e Compatible connectors reduce the need for wiring modifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 kHz Crossover:\u003c\/strong\u003e Dedicated high-pass crossover helps divide midrange and tweeter duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor System:\u003c\/strong\u003e Compact magnetic assembly helps minimize speaker bulk and weight.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW K4E midrange uses an aluminum die-cast basket, neodymium magnetic group, 25 mm fiberglass voice coil, and removable damping motor cover. Its water-repellent pressed-paper cone is paired with a 29 mm Tetolon tweeter using a 25 mm voice coil. The crossover uses high-quality components and Plug \u0026amp; Play connections.\u003c\/p\u003e\u003cp\u003eThis kit is intended for select BMW-MINI vehicles equipped with factory two-way systems and compatible large-basket mounting locations. A tweeter support and 30 cm Plug \u0026amp; Play extension are supplied to assist installation in OEM placements. Confirm vehicle fitment, mounting configuration, and amplifier or factory-system compatibility before installation; some BMW models with non-standard fixings may require the separately available APBMW A4E adapter kit.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219526214,"sku":"APBMWK4E","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zf7xVJZbL.jpg?v=1784362072"},{"product_id":"audison-apbmw-k4m-4-bmw-mini-2-way-component-speakers","title":"Audison APBMW K4M 4\" BMW\/MINI 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APBMW K4M is a 4-inch, two-way component speaker kit engineered for upgrading compatible BMW and MINI factory two-way audio systems. It combines a 100 mm midrange driver with a separate 29 mm tweeter, an inline high-pass crossover, and vehicle-oriented Plug \u0026amp; Play connections. The kit is intended to improve clarity and tonal balance while retaining an OEM-style installation approach.\u003c\/p\u003e\u003cp\u003eThe 100 mm midrange uses a water-repellent pressed-paper cone, selected for natural midrange reproduction. Its 90 Hz resonance frequency supports high-pass filtering in the 150–200 Hz range when used in a properly configured system. With 50 watts continuous and 100 watts peak power handling, it is suited to factory-system upgrades and appropriately matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA 29 mm Tetolon-dome tweeter handles the upper-frequency range and is designed for off-axis dispersion in vehicle interiors. The supplied crossover uses a 6 kHz high-pass point with a 6 dB\/octave slope for the tweeter. A selectable -3 dB or 0 dB tweeter adjustment helps accommodate placement and listening preference.\u003c\/p\u003e\u003cp\u003eAudison uses neodymium magnetic assemblies to keep the components compact, while the midrange employs a 25 mm fiberglass voice coil and an aluminum die-cast basket. The midrange's removable damping motor cover and the water-repellent cone support use in factory-style door locations. Plug \u0026amp; Play connectors are built into the system to simplify integration where the vehicle fitment is compatible.\u003c\/p\u003e\u003cp\u003eThe APBMW K4M is a practical fit for listeners seeking a BMW\/MINI-specific front, rear-deck, or other OEM-location speaker upgrade, subject to vehicle compatibility. A 300 mm extension cable and tweeter support are supplied for installation flexibility and OEM-position placement. Some vehicles may require an optional mounting adapter, so fitment should be checked before ordering.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI Upgrade Design:\u003c\/strong\u003e Developed for compatible factory two-way BMW and MINI audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Midrange:\u003c\/strong\u003e Compact 4-inch driver fits small-basket OEM-style speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Water-repellent cone supports natural midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Tweeter:\u003c\/strong\u003e 29 mm dome is optimized for off-axis high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInline High-Pass Crossover:\u003c\/strong\u003e Protects and routes high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Connections:\u003c\/strong\u003e Vehicle-oriented connectors simplify compatible installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW K4M pairs a neodymium motor system with an aluminum die-cast midrange basket to manage space and weight in OEM-oriented installations. Its 25 mm fiberglass midrange voice coil is designed for power handling and rigidity, while the separate tweeter uses a Tetolon dome. The kit also includes a removable damping motor cover, tweeter support, crossover hardware, and a 300 mm extension lead.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker-basket style, factory-system configuration, and available tweeter location before installation. Connect the included crossover between the vehicle wiring and tweeter as directed, then use the supplied extension cable where needed. Certain BMW\/MINI models require the optional Audison APBMW A4E adapter for non-standard mounting points; professional installation is recommended when factory trim, door panels, or wiring must be modified.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614219952198,"sku":"APBMWK4M","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71CWacBZdfL.jpg?v=1784362116"},{"product_id":"audison-apbmw-s8-2-2-8-bmw-mini-underseat-subwoofer","title":"Audison APBMW S8-2.2 8\" BMW\/MINI Underseat Subwoofer","description":"\u003cp\u003eThe Audison APBMW S8-2.2 is an 8-inch, 2-ohm underseat subwoofer designed for select BMW and MINI applications. It is intended to replace a factory underseat woofer while using the vehicle's original acoustic enclosure. This approach supports a cleaner OEM-style upgrade without adding a separate subwoofer box to the cabin or cargo area.\u003c\/p\u003e\u003cp\u003eIts 200 mm driver is engineered for bass and midbass reproduction from 40 to 500 Hz. With 150 watts continuous power handling and 91 dB sensitivity, it is suited to systems that need stronger low-frequency foundation than the original driver can provide. The 2-ohm design is intended for use with amplification that is stable at a 2-ohm speaker load.\u003c\/p\u003e\u003cp\u003eA neodymium magnetic assembly helps keep the driver compact for the shallow underseat location. The design uses an inverted acoustic structure with an internal cone, while the pressed-paper cone and rubber surround are selected for controlled cone movement. A plastic chassis supports the vehicle-specific form factor.\u003c\/p\u003e\u003cp\u003eThe APBMW S8-2.2 uses a copper voice coil on an aluminum former for heat handling and stability during excursion. Its specified linear excursion is ±7 mm, with 10 mm of mechanical excursion. These characteristics are paired with electroacoustic parameters developed to work with the factory underseat acoustic load.\u003c\/p\u003e\u003cp\u003eThis subwoofer is a practical option for a BMW or MINI audio upgrade centered on retaining the factory layout. Audison specifically identifies the 2-ohm configuration for active multi-amplified systems, including use with its AP 8.9 bit amplifier. Confirm vehicle fitment, factory-system configuration, and amplifier load capability before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI-Specific Tuning:\u003c\/strong\u003e Designed to use the factory underseat acoustic enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Impedance:\u003c\/strong\u003e Supports higher output from compatible 2-ohm-stable amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 W Continuous Handling:\u003c\/strong\u003e Matches amplified OEM-replacement system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Provides compact magnetic motor design for shallow installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Works with a rubber surround for controlled driver movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Placement Gaskets:\u003c\/strong\u003e Two 5 mm gaskets are provided for installation positioning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW S8-2.2 combines a plastic chassis, neodymium magnet, pressed-paper cone, rubber surround, copper voice coil, and aluminum former. Its shallow 55.2 mm overall depth and 32 mm mounting depth are tailored to underseat placement. The driver has a 50 mm voice-coil diameter and a 159 mm effective piston diameter.\u003c\/p\u003e\u003cp\u003eUse the APBMW S8-2.2 only where the vehicle has a compatible factory underseat woofer location and sufficient clearance. Verify that the amplifier channel is rated for a 2-ohm load and set crossover, level, and DSP tuning appropriately for the rest of the system. The included 5 mm gaskets can be used as needed for OEM-placement fitment.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614220345414,"sku":"APBMWS8-2-2","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71D7fUXxA5L.jpg?v=1784362165"},{"product_id":"audison-apbmw-x4e-4-bmw-mini-coaxial-speakers","title":"Audison APBMW X4E 4\" BMW\/MINI Coaxial Speakers","description":"\u003cp\u003eThe Audison APBMW X4E is a pair of 4-inch, two-way coaxial speakers engineered for selected BMW and MINI factory speaker locations using the large-basket fitment. It is intended for vehicles that cannot accommodate a separate front two-way system, as well as compatible rear-speaker upgrade locations. The coaxial layout combines the midrange driver and tweeter in one OEM-oriented assembly.\u003c\/p\u003e\u003cp\u003eEach APBMW X4E handles up to 40 watts continuous and 80 watts peak at a 4-ohm impedance. Its 100 Hz to 22 kHz frequency response supports midrange and high-frequency reproduction in a factory-style speaker position. With 88 dB sensitivity, it is designed to work within an appropriately matched OEM-replacement or amplified system.\u003c\/p\u003e\u003cp\u003eThe midrange section uses a water-repellent pressed-paper cone intended to provide a natural midrange character. A 25 mm fiberglass woofer voice coil supports power handling and stiffness. The built-in Tetolon dome tweeter uses a 20 mm voice coil and a 24 mm diaphragm.\u003c\/p\u003e\u003cp\u003eA neodymium magnetic assembly helps keep the speaker compact for BMW\/MINI OEM locations. The die-cast aluminum basket is made for the APBMW X4E large-basket mounting format and uses BMW\/MINI-compatible Plug \u0026amp; Play connectors. Its removable damping motor cover can be taken off where installation clearance is limited.\u003c\/p\u003e\u003cp\u003eThe APBMW X4E is a practical choice for replacing compatible factory coaxial speakers while retaining vehicle-specific mounting and connection provisions. A 30 cm extension cable with Plug \u0026amp; Play connectors is supplied to add flexibility when routing the connection. Confirm the vehicle's original speaker basket, mounting location, and audio-system configuration before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBMW\/MINI Large-Basket Fitment:\u003c\/strong\u003e Dedicated basket and fixing arrangement suit compatible OEM speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates midrange and tweeter functions in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Power:\u003c\/strong\u003e Supports properly matched factory-replacement or amplified speaker channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Water-repellent cone material supports natural midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e Optimized dispersion helps suit off-axis OEM speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug \u0026amp; Play Extension:\u003c\/strong\u003e Included 30 cm extension aids installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBMW X4E combines a neodymium magnetic group, 25 mm fiberglass woofer voice coil, water-repellent pressed-paper cone, and Tetolon dome tweeter. Its aluminum die-cast basket is designed for mechanical rigidity and BMW\/MINI-compatible placement. A removable damping motor cover is included as part of the speaker design.\u003c\/p\u003e\u003cp\u003eUse these speakers only where the vehicle accepts the APBMW X4E large-basket mounting format. Connect through the supplied 30 cm Plug \u0026amp; Play extension as needed, and verify clearance, connector style, and factory audio-system configuration before fitting. Although the cone is water-repellent, speakers should not be installed in locations exposed directly to water, excessive humidity, dust, or dirt.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614220968006,"sku":"APBMWX4E","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Uhr3k53kL.jpg?v=1784362241"},{"product_id":"audison-apbx10ds-prima-10-sealed-subwoofer-enclosure","title":"Audison APBX10DS Prima 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Audison APBX10DS is a passive 10-inch subwoofer system supplied in a compact, sealed enclosure. It is designed for adding controlled low-frequency output to a vehicle audio system without building a custom subwoofer box. Its 12-liter enclosure and shallow overall profile help make it practical for trunk installations where available space is limited.\u003c\/p\u003e\u003cp\u003eThis model uses a dual 4-ohm subwoofer configuration and is rated for 400 watts continuous power handling and 800 watts peak power handling. It is intended for use with an external subwoofer amplifier, rather than operating as a powered enclosure. The sealed-box design supports a concise, controlled bass character suited to a wide range of music.\u003c\/p\u003e\u003cp\u003eThe enclosure uses Audison's 2S², or 2 Sides\/2 Sounds, layout. It can be installed with the driver facing down to emphasize low-frequency extension, or facing up for a more direct presentation with added punch and definition. This gives installers flexibility to tune placement around cargo-space and listening priorities.\u003c\/p\u003e\u003cp\u003eThe APBX10DS is built around the APS 10 D driver, with a high-density flux ferrite motor and a water-repellent pressed-paper cone. Its cone, dustcap, and basket geometry is engineered for long linear excursion, specified at 11 mm one-way. A substantial motor assembly optimized with FEM modeling helps maintain driver control during higher-excursion operation.\u003c\/p\u003e\u003cp\u003eFor system integration, the enclosure includes Audison's SSP Sub Smart Plug connection system, combining conventional push terminals with a plug-and-play terminal block. It was developed to pair with compatible Audison amplified and DSP-based systems, while its passive design also leaves amplifier selection to the installer. Leveling feet with Velcro inserts and a supplied metal protection grille support practical everyday installation and use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Sealed Enclosure:\u003c\/strong\u003e Delivers installed bass reinforcement in a compact 12-liter cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Handling:\u003c\/strong\u003e Supports matching with a suitably rated external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Configuration:\u003c\/strong\u003e Provides impedance setup flexibility through the enclosure connection system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Mounting Design:\u003c\/strong\u003e Allows down-firing or up-firing installation to suit the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSP Sub Smart Plug:\u003c\/strong\u003e Combines push terminals and a quick-release plug-and-play terminal block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Driver Grille:\u003c\/strong\u003e Helps protect the subwoofer driver in cargo-area installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBX10DS uses a sealed, ultra-low-profile cabinet with rounded corners that aid positioning and help reinforce the enclosure structure. Its 10-inch driver combines a high-density flux ferrite magnet with a water-repellent pressed-paper cone. The supplied metal grille provides driver protection, while leveling feet with Velcro inserts help keep the enclosure stable on carpeted surfaces.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer enclosure and requires an external amplifier plus appropriate signal routing and power wiring. Confirm amplifier stability and configure the 4+4-ohm impedance through the SSP connection system before final wiring. The enclosure may be mounted driver-up or driver-down, but allow clearance for the grille, feet, wiring connection, and driver movement.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614221295686,"sku":"APBX10DS","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pmR6NyCjL.jpg?v=1784362282"},{"product_id":"audison-apbx8as2-8-active-subwoofer","title":"Audison APBX8AS2 8\" Active Subwoofer","description":"\u003cp\u003eThe Audison APBX8AS2 is a compact 8-inch active subwoofer enclosure designed to add controlled low-frequency output without requiring a separate external subwoofer amplifier. Its sealed enclosure and integrated amplifier make it suitable for vehicles where cargo-space efficiency and straightforward system integration matter. It is intended for listeners upgrading factory or aftermarket audio systems that need more bass presence and impact.\u003c\/p\u003e\u003cp\u003eAn integrated 250-watt RMS amplifier powers the included 8-inch subwoofer driver at an ultra-low 0.4-ohm load. The enclosure uses Audison He-Li high-efficiency\/low-impedance amplification technology without a switching power supply. Dynamic Bass Tracking monitors input peaks to help manage the system when it is driven near maximum output.\u003c\/p\u003e\u003cp\u003eThe APBX8AS2 provides tuning controls for matching the subwoofer to the vehicle and main speakers. Its adjustable 12 dB\/octave Butterworth low-pass filter covers 50 to 300 Hz and can be bypassed when a DSP or source unit provides dedicated subwoofer filtering. Bass boost, gain adjustment, and a 0\/180-degree phase switch give the installer practical setup flexibility.\u003c\/p\u003e\u003cp\u003eBoth RCA low-level and high-level speaker inputs are provided, allowing use with aftermarket receivers or many factory audio systems. Left and right input channels are summed internally to mono for subwoofer playback. The selectable ART automatic turn-on function supports remote-in, DC-offset, or audio-signal activation methods.\u003c\/p\u003e\u003cp\u003eThe sealed, low-profile enclosure can be installed up-firing or down-firing through Audison's 2S² layout concept. Down-firing leveling feet with Velcro inserts help secure the enclosure to carpeted cargo areas while retaining easy removability. An included HRC AP wired remote provides subwoofer-level adjustment from the front of the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Delivers 250 watts RMS at 0.4 ohm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Bass Tracking:\u003c\/strong\u003e Processes signal peaks to help control distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Inputs:\u003c\/strong\u003e Supports RCA low-level and speaker-level signal connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossover:\u003c\/strong\u003e Low-pass filter adjusts from 50 to 300 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Placement Design:\u003c\/strong\u003e Supports up-firing or down-firing enclosure orientation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Level Remote:\u003c\/strong\u003e HRC AP remote adjusts subwoofer volume from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBX8AS2 combines an 8-inch driver, integrated amplifier, and sealed enclosure in a 6.22-inch-tall package. Its driver uses a water-repellent pressed-paper cone, high-density-flux ferrite magnet, and 40 mm voice coil. Rounded enclosure corners are designed to reinforce the cabinet and reduce enclosure resonances, while the included metal grille protects the driver.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure cargo-area location with clearance for its wiring and controls. Use RCA inputs with a preamplified source output, or connect the supplied high-level input connector to compatible speaker outputs; the unit also requires battery positive, ground, and optionally remote-turn-on wiring. Set the gain, crossover, phase, bass boost, and turn-on mode during final system tuning, and use the included feet when mounting down-firing on carpet.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614221819974,"sku":"APBX8AS2","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61fluESBH3L.jpg?v=1784362326"},{"product_id":"audison-apk130-5-25-2-way-component-speaker-system","title":"Audison APK130 5.25\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK130 is a 5.25-inch, two-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over coaxial speakers. The kit combines AP 5 woofers, AP 1 tweeters, compact APCX TW passive crossovers, and protective grilles. Its 4-ohm design is intended for use with compatible factory or aftermarket car audio amplification.\u003c\/p\u003e\u003cp\u003eThis system is suited to installations with 130 mm speaker locations, including many OEM door and rear-panel placements. The separate 26 mm tweeters allow higher frequencies to be positioned closer to the listener than the woofers. That arrangement can help support a more focused front-stage installation when properly mounted and tuned.\u003c\/p\u003e\u003cp\u003eThe APK130 is rated for 75 watts continuous and 225 watts peak power handling per system, with a 70 Hz to 20 kHz published frequency response. The AP 5 woofer uses a 32 mm pure-copper voice coil, water-repellent treated paper cone, and TPU Triple Wave surround. Its 93 dB sensitivity specification supports efficient operation from appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm Tetolon-fibre diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to address response effects that can occur around 10 kHz to 13 kHz when the tweeter is installed behind restrictive OEM grilles. The included APCX TW crossover provides a selectable 0 dB or +2 dB tweeter level setting for different mounting conditions.\u003c\/p\u003e\u003cp\u003eFor an OEM-oriented upgrade, the compact woofer basket and reduced mounting depth help fit available factory speaker locations. High-current fast-on terminals on the woofers use double contacts on both positive and negative poles for flexible connection. The system can be used as a front component stage with an external amplifier or a compatible head unit, provided power and mounting requirements are checked before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Rating:\u003c\/strong\u003e Handles appropriately matched amplifier power for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 5 Woofer:\u003c\/strong\u003e 130 mm woofer uses a treated paper cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Tweeter:\u003c\/strong\u003e 26 mm Tetolon-fibre tweeter covers high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e APCX TW offers 0 dB and +2 dB settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Protective grilles are supplied with the speaker system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 5 woofer combines a compact, abrasion-resistant coated basket with a damping-epoxy-secured motor, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. Its 32 mm pure-copper voice coil is paired with an 85 x 40 x 13 mm magnet assembly. The AP 1 tweeter uses a neodymium magnet and a 20 mm CCAW voice coil on a Kapton former with ferrofluid cooling.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm woofer and provides sufficient mounting clearance before purchase; the AP 5 is listed at 48.5 mm mounting depth and 119 mm for Dimension B. Wire each AP 1 tweeter through its supplied APCX TW crossover, following the marked connections and preserving polarity. Use the 0 dB setting for an unobstructed A-pillar tweeter location, or the +2 dB setting when the tweeter is installed behind an OEM grille.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614222245958,"sku":"APK130","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81K_dJe06AL.jpg?v=1784362376"},{"product_id":"audison-apk163-6-5-3-way-component-speaker-set","title":"Audison APK163 6.5\" 3-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 163 is a 4-ohm, three-way component speaker system designed for upgrading factory car audio while retaining practical OEM-style installation options. It combines a 6.5-inch AP 6.5 woofer, 4-inch AP 4 midbass, and 1-inch AP 1 tweeter with dedicated passive crossover networks. This arrangement is suited to listeners who want greater frequency coverage and separation than a typical two-way component system.\u003c\/p\u003e\u003cp\u003eWith 125 watts continuous and 375 watts peak power handling, the APK 163 is intended for use with an appropriately matched aftermarket amplifier or a capable factory-powered upgrade. Its specified 50 Hz to 20 kHz frequency response covers bass, midrange, and treble duties across three separate drivers. The system's 4-ohm nominal impedance supports conventional car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil and a water-repellent pressed-paper cone to provide controlled low-frequency output. The AP 4 midbass extends the system's vocal and upper-midrange coverage, helping place more of the musical range in dedicated drivers. A 26 mm Tetolon-fiber AP 1 tweeter handles high frequencies and incorporates an acoustic lens intended for OEM grille installations.\u003c\/p\u003e\u003cp\u003eAudison equips the APK 163 with separate compact crossovers for the woofer, midbass, and tweeter. This design helps simplify OEM replacement installations by avoiding the need to route additional crossover wiring through the vehicle door. The tweeter crossover also provides 0 dB and +2 dB level settings for adjustment based on tweeter position and grille placement.\u003c\/p\u003e\u003cp\u003eThe woofer and midbass use water-repellent treated paper cones, TPU surrounds, and compact baskets intended for shallow OEM locations. Their Triple Wave surround profile is engineered to support linear cone excursion, while the woofer uses high-current fast-on terminals with dual contacts for flexible connection. Grilles and crossover networks are included, making the APK 163 a complete passive three-way front-stage speaker package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Separate woofer, midbass, and tweeter cover dedicated frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Individual networks simplify integration of each speaker component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Selection:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cones:\u003c\/strong\u003e Treated woofer and midbass cones suit vehicle-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Focused Connections:\u003c\/strong\u003e Woofer fast-on terminals support quick, flexible wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer and AP 4 midbass use high-density-flux ferrite magnets, water-repellent pressed-paper cones, and TPU Triple Wave surrounds. Their compact baskets have an abrasion-resistant, scratch-resistant coating, while the woofer motor is secured with damping epoxy adhesive. The AP 1 tweeter uses a 26 mm Tetolon-fiber diaphragm and wide-roll surround.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has mounting positions for a 165 mm woofer, 100 mm midbass, and 26 mm tweeter before installation. Install each included crossover with its intended driver and use the specified passive crossover points rather than bypassing the networks. Select the tweeter crossover's 0 dB or +2 dB setting according to placement, particularly when the tweeter is mounted behind a restrictive factory grille.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614222704710,"sku":"APK163","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61LYj2RlIVL.jpg?v=1784362419"},{"product_id":"audison-apk-165-6-5-2-way-component-speaker-system","title":"Audison APK 165 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK 165 is a 4-ohm, 6.5-inch two-way component speaker system designed for upgrading factory front-stage audio. It combines an AP 6.5 woofer, AP 1 tweeter, APCX TW passive crossover, and included grilles. The system is intended for installations where separate woofer and tweeter locations can improve staging and detail over a basic full-range door speaker.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous power handling and 300 watts peak power handling, the APK 165 is suited to systems using an appropriate external amplifier or compatible amplified source. Its 60 Hz to 20 kHz frequency response covers the main midbass and high-frequency range for a component front stage. The woofer's 93.5 dB SPL specification supports effective output from moderate-power car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. This combination is engineered for controlled low-frequency reproduction and linear cone travel. The woofer has a listed maximum linear excursion of ±2.5 mm and an 80 Hz resonant frequency.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround and an acoustic lens. The lens is designed to help address response effects in the 10 kHz to 13 kHz range that can occur when a tweeter is mounted behind restrictive factory grilles. This makes the system especially relevant for OEM-style mounting locations as well as exposed A-pillar placements.\u003c\/p\u003e\u003cp\u003eAn APCX TW passive high-pass crossover is included to direct high frequencies to the tweeter. Its selectable 0 dB and +2 dB level settings allow adjustment for different tweeter mounting conditions. The APK 165 can serve as the front component stage in a larger system with rear fill, a dedicated amplifier, DSP processing, and a subwoofer for deeper bass.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofer and tweeter support more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Matches appropriately powered 4-ohm amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX TW Crossover:\u003c\/strong\u003e Provides a high-pass network for the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Supports use in vehicle door locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Terminals:\u003c\/strong\u003e Helps simplify woofer connection during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its treated paper cone is paired with a thermoplastic polyurethane surround, while the tweeter incorporates a wide-roll surround and acoustic lens. Included grilles provide an additional finishing option where the speakers are not concealed by factory trim.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available 165 mm speaker opening, mounting depth, mounting-hole pattern, and tweeter location before installation. Use the supplied passive crossover between the signal source or amplifier and the tweeter, selecting 0 dB for an A-pillar installation without an added grille or +2 dB when the tweeter is installed behind an OEM grille. The woofer's high-current fast-on terminals use double contacts on both positive and negative poles for connection flexibility.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223130694,"sku":"APK165","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL.jpg?v=1784362462"},{"product_id":"audison-apk165ohm2-6-5-2-way-component-speaker-set","title":"Audison APK165OHM2 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 165 Ω2 is a 6.5-inch, two-way component speaker system for vehicle audio upgrades. It combines AP 6.5 Ω2 woofers, AP 1 tweeters, dedicated passive crossovers, and grilles. The separate woofer and tweeter components allow placement that better suits factory speaker locations than a single coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis system uses a 2-ohm nominal impedance and is intended for amplifiers that are stable at a 2-ohm speaker load. It is rated for 100 watts continuous power handling and 300 watts peak power. Confirm amplifier load capability and available installation space before choosing this version.\u003c\/p\u003e\u003cp\u003eThe APK 165 Ω2 has a specified frequency response of 50 Hz to 20 kHz and a 95 dB sensitivity rating. Its 75 Hz woofer resonance frequency and 2.8 mm maximum linear excursion support useful low-frequency output within a properly installed door or factory speaker location. A separate tweeter is used to cover upper frequencies instead of asking the woofer to reproduce the full range.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 Ω2 woofer uses a water-repellent treated paper cone and a TPU surround with Audison's Triple Wave profile. Its 25 mm voice coil has a 10 mm winding height, while the compact basket is finished with an abrasion- and scratch-resistant coating. The AP 1 tweeter incorporates an acoustic lens intended to help balance response in the 10 kHz to 13 kHz region when used behind restrictive factory grilles.\u003c\/p\u003e\u003cp\u003eTwo separate passive crossovers divide the signal between the woofer and tweeter. The APCX WF Ω2 woofer network uses a low-loss inductor, while the APCX TW Ω2 tweeter network provides selectable Hi-Contour operation. Integrated crossover leads terminate in polarity-differentiated fast-on connectors to support OEM-style speaker replacement wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm System:\u003c\/strong\u003e Designed to draw more power from compatible 2-ohm-stable amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Direct woofer and tweeter frequencies to their intended drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Contour Tweeter Setting:\u003c\/strong\u003e Provides a selectable upper-frequency contour option for installation conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Woofer Cone:\u003c\/strong\u003e Uses water-repellent paper material for the 6.5-inch woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Leads:\u003c\/strong\u003e Polarity-differentiated connectors simplify crossover-to-speaker connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer uses a 165 mm frame with a 127 mm cone diameter, a 25 mm voice coil, and an 85 x 32 x 15 mm magnet. Its TPU Triple Wave surround is designed for linear excursion, while the compact basket is coated for abrasion and scratch resistance. The 26 mm AP 1 tweeter uses a 20 mm voice coil and an acoustic lens, and protective grilles are included.\u003c\/p\u003e\u003cp\u003eInstall the woofers only where the vehicle provides adequate mounting depth and clearance, and mount the tweeters securely behind a protective grille. Route the amplifier signal first to the supplied APCX WF Ω2 and APCX TW Ω2 passive networks, then connect each network to its matching driver using the integrated fast-on leads. Use an amplifier that is explicitly rated for 2-ohm operation, observe polarity, and select the tweeter contour setting according to the mounting position and factory-grille presence.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223589446,"sku":"APK165OHM2","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL_c825f717-f13c-4df3-9bd2-045249988241.jpg?v=1784362512"},{"product_id":"audison-apk165p-6-5-2-way-component-speaker-system","title":"Audison APK165P 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK165P is a 6.5-inch, 2-way component speaker system for upgrading front-stage sound in compatible vehicle locations. It pairs separate AP 6.5P woofers with AP 1P tweeters and dedicated passive crossover modules. The system is designed for installations where the woofer and tweeter are mounted separately rather than in a single coaxial speaker location.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 115-watt continuous power handling, and 345-watt peak power handling, this system is suited to aftermarket audio systems using a compatible head unit or external amplifier. Its 50 Hz to 24 kHz stated system frequency response covers bass and midrange from the door woofer through high frequencies from the separate tweeter. The 92.5 dB SPL system sensitivity rating supports efficient output from properly matched equipment.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P woofer uses a water-repellent treated paper cone and a 32 mm CCAW voice coil. Its 5.6 mm Xmax specification and compact basket are intended to support factory-style door mounting locations. The AP 1P tweeter uses a 29 mm Tetolon fibre dome with a 25 mm CCAW voice coil.\u003c\/p\u003e\u003cp\u003eAudison's AIF, or Any Install Faceplate, system gives the AP 1P tweeter interchangeable mounting options. Three mounting accessories are supplied to support different installation approaches, helping accommodate common factory tweeter locations and custom placements. The tweeter's double-neodymium magnetic assembly and FEM-optimized dome profile are engineered for high-frequency extension and off-axis dispersion.\u003c\/p\u003e\u003cp\u003eSeparate compact crossover modules divide the signal between the woofer and tweeter. The woofer low-pass filter is specified at 4 kHz with a 6 dB\/octave slope, while the tweeter high-pass filter is 4 kHz with a 12 dB\/octave slope. This makes the APK165P a practical component set for a front-speaker upgrade built around compatible 4-ohm amplification and proper vehicle-specific mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate 6.5-inch woofers and 29 mm tweeters allow dedicated placement of each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e115 W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting:\u003c\/strong\u003e Interchangeable faceplates and supplied mounting accessories support varied mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Copper-clad aluminum wire voice coils are used in both woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Separate compact woofer and tweeter crossover modules simplify signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e The AP 6.5P woofer cone is treated for automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P woofer combines a treated paper cone, 32 mm CCAW voice coil, compact basket, and a 100 x 40 x 18 mm magnetic assembly. The AP 1P tweeter uses a Tetolon fibre dome, 25 mm CCAW voice coil, and double-neodymium magnetic assembly. The system also provides a selectable tweeter level setting of 0 dB or +3 dB at the crossover.\u003c\/p\u003e\u003cp\u003eConfirm door opening diameter, mounting depth, and clearance behind the panel before installation; the AP 6.5P lists a 141 mm cutout diameter and 66.5 mm mounting depth. Route each channel through its assigned passive crossover rather than connecting the tweeter directly to a full-range amplifier output. Secure all components firmly, use the appropriate faceplate and mounting accessory for the tweeter location, and confirm polarity before reassembling vehicle trim.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614226604102,"sku":"APK165P","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71KYClkNHCL.jpg?v=1784362857"},{"product_id":"audison-apk570-5-x-7-2-way-component-speakers","title":"Audison APK570 5 x 7\" 2-Way Component Speakers","description":"\u003cp\u003eThe Audison APK570 is a 2-way component speaker system designed for vehicles with factory 5 x 7-inch elliptical door-speaker locations. It combines AP 570 woofers, AP 1 tweeters, and dedicated APCX TW 570 passive crossovers. This kit is intended for replacing factory door speakers while retaining a separate tweeter layout.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous and 300 watts peak power handling, the APK570 is suited to amplified systems as well as compatible factory or aftermarket head-unit upgrades. Its 4-ohm nominal impedance supports common car-audio amplification configurations. The rated 55 Hz to 20 kHz frequency response covers midbass through high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe AP 570 woofer uses a 32 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer measurement. A Triple Wave surround is used to support linear cone excursion.\u003c\/p\u003e\u003cp\u003eThe separate AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround. Its acoustic lens is designed to address in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM tweeter placements. The dedicated crossover routes high frequencies to the tweeter at a specified 3 kHz high-pass point.\u003c\/p\u003e\u003cp\u003eFor OEM-focused installation, the APK570 uses a compact woofer basket and reduced mounting depth. High-current double-contact Faston terminals simplify woofer and tweeter connections, while the compact crossover includes selectable tweeter attenuation. It is a practical option when a vehicle already accommodates 5 x 7-inch door woofers and separate tweeters.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 x 7-Inch Component System:\u003c\/strong\u003e Fits vehicles designed for elliptical 5 x 7-inch door woofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Power:\u003c\/strong\u003e Supports substantial power in an appropriately matched system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAP 1 Separate Tweeters:\u003c\/strong\u003e Provides dedicated high-frequency reproduction outside the woofer location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Directs high frequencies to the tweeters at 3 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Offers 0 dB or +2 dB attenuation selection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps suit the woofer to door-mounted use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 570 woofer combines a treated paper cone, Triple Wave surround, pure-copper voice coil, and compact coated basket. Its motor is secured with damping epoxy adhesive, while the AP 1 tweeter uses a wide-roll surround and acoustic lens. The crossover is compact and includes Faston connectors intended to reduce connection errors.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 5 x 7-inch woofer openings and provisions for separate tweeters before installation. Use the included dedicated APCX TW 570 crossovers between the audio source or amplifier and the individual woofer and tweeter connections. Match the system to a compatible 4-ohm amplifier or speaker output and observe the 100-watt continuous power rating when setting amplifier gain.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614227062854,"sku":"APK570","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71aKwGyxdOL.jpg?v=1784362895"},{"product_id":"audison-apk690-6x9-2-way-component-speaker-system","title":"Audison APK690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK690 is a Prima Series 2-way component speaker system designed for vehicles with factory 6 x 9-inch door speaker locations. It combines AP 690 elliptical woofers, AP 1 tweeters, and dedicated APCX TW 690 passive crossovers. This configuration provides a practical upgrade path for vehicles that need separate high-frequency placement rather than a coaxial speaker.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power handling, the APK690 presents a 4-ohm load to the audio system. Its specified system frequency response is 40 Hz to 20 kHz, covering bass and midrange output from the wofer section along with high-frequency extension from the separate tweeters. The woofer sensitivity is rated at 95 dB SPL.\u003c\/p\u003e\u003cp\u003eThe AP 690 woofer uses a 25 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized with Klippel R\u0026amp;D Scan Vibrometer measurements. A Triple Wave surround is used to support linear cone excursion, while the compact basket is intended to help with OEM-style door installations.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter has a 26 mm diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to help compensate for in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM mounting locations. The separate tweeter arrangement gives installers flexibility to retain or improve factory high-frequency speaker positions.\u003c\/p\u003e\u003cp\u003eEach system uses an APCX TW 690 crossover, which applies a 6 dB-per-octave high-pass filter at 3.3 kHz for the tweeter. The compact crossover includes a 0 dB or +3 dB tweeter-level setting for adjustment after installation. The APK690 can be used as part of a factory-radio upgrade or paired with a compatible 4-ohm aftermarket amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible vehicle-specific placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports systems rated up to 100 watts continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e APCX TW 690 networks manage tweeter filtering and level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Choose 0 dB or +3 dB tweeter attenuation settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Treated woofer cone is designed for door-speaker environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Woofer Coil:\u003c\/strong\u003e 25 mm voice coil supports power handling and cone control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 690 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its 90 x 32 x 15 mm woofer magnet and 25 mm voice coil are paired with a treated paper cone and Triple Wave surround. The AP 1 tweeter uses a 26 mm diaphragm, while the compact APCX TW 690 crossover measures 46.5 x 37.5 x 20.1 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6 x 9-inch elliptical woofer and has adequate mounting clearance before purchase. Install the AP 1 tweeters and AP 690 woofers through the supplied APCX TW 690 crossovers; the crossover's fast-on connectors are intended to simplify correct connections. Match the system to a compatible 4-ohm amplifier or speaker channel, and use the 0 dB or +3 dB tweeter setting to suit the final mounting location.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614227554374,"sku":"APK690","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-VOSfKKVL.jpg?v=1784362949"},{"product_id":"audison-aps10d-prima-10-dual-4-ohm-subwoofer","title":"Audison APS10D Prima 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Audison APS 10 D is a 10-inch dual-voice-coil subwoofer from the Prima series, designed for vehicle bass upgrades where enclosure space is limited. It is intended for sealed enclosures beginning at 10 liters, making it suitable for compact trunk, hatch, and custom-install applications. Its 4+4-ohm voice-coil arrangement gives installers wiring flexibility when matching an appropriate amplifier.\u003c\/p\u003e\u003cp\u003eThis driver is built for listeners who want to add low-frequency foundation without committing to a deep, large-volume subwoofer installation. It handles 400 watts continuous power and 800 watts peak power, with a 27 Hz resonant frequency and 84 dB sensitivity. The design focuses on controlled bass performance from a compact sealed enclosure rather than requiring a large box.\u003c\/p\u003e\u003cp\u003eAudison uses a cone, dustcap, and basket geometry designed to support substantial excursion while limiting installation depth. The APS 10 D has a 12.6 mm maximum linear excursion rating and an 88 mm mounting depth. This combination helps make the driver practical for installations where rear clearance is restricted.\u003c\/p\u003e\u003cp\u003eA water-repellent pressed-paper cone is paired with a high-density flux ferrite motor assembly. The motor is optimized with finite element modeling to maintain control under high-power and high-excursion use. Venting beneath the spider eliminates the need for a central pole vent, allowing the driver to sit closer to the enclosure's rear wall when properly installed.\u003c\/p\u003e\u003cp\u003eThe APS 10 D can complement an OEM-integration or aftermarket audio system when paired with a compatible external amplifier and sealed enclosure. Its dual 4-ohm coils can be wired to suit the amplifier's supported load. A steel mesh grille and plastic gasket are included to support a finished installation and help protect the driver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Delivers bass performance in sealed enclosures starting at 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Handling:\u003c\/strong\u003e Supports appropriately matched external amplification for sustained listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e The 88 mm mounting depth helps fit restricted installation locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a durable cone material developed for subwoofer operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket-Integrated Venting:\u003c\/strong\u003e Allows closer placement to the enclosure rear wall.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 D uses a high-density flux ferrite magnet, 60 mm voice coil, water-repellent pressed-paper cone, and a steel mesh grille. Its basket geometry and surround\/spider design are engineered to support linear cone travel while helping limit rocking motion. The included plastic gasket helps provide a neat interface between the driver and mounting surface.\u003c\/p\u003e\u003cp\u003eUse this subwoofer in a sealed enclosure with an internal volume starting at 10 liters; a 10 to 12 liter enclosure is specified for compact applications. Confirm the 270 mm outside diameter, 233 mm cutout diameter, and 88 mm mounting depth before building or modifying an enclosure. Wire the dual 4-ohm coils only in a configuration supported by the connected amplifier, and set amplifier gain and filtering appropriately during installation.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614230208582,"sku":"APS10D","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71RnLhIPHoL.jpg?v=1784362997"},{"product_id":"audison-aps-10-s4s-10-4-ohm-shallow-subwoofer","title":"Audison APS 10 S4S 10\" 4-Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Audison APS 10 S4S is a 10-inch shallow subwoofer driver designed for car-audio systems that need meaningful low-frequency reinforcement without requiring a large enclosure. Its single 4-ohm voice coil configuration makes it a straightforward choice for a dedicated subwoofer amplifier channel or a bridged amplifier setup. It is intended for custom sealed enclosures with internal volume starting at 10 liters.\u003c\/p\u003e\u003cp\u003eThis Prima-series subwoofer addresses installations where mounting depth and enclosure space are limited, such as compact trunks, underfloor areas, and vehicle-specific build locations. Its 120 mm ultra-low-profile design helps reduce the space required behind the driver. Basket ventilation beneath the spider also eliminates the need for a central pole vent, helping support close placement to an enclosure’s rear wall.\u003c\/p\u003e\u003cp\u003eRated for 400 watts continuous power and 800 watts peak power, the APS 10 S4S is built for properly amplified bass duty in a sealed system. Its 4-ohm nominal impedance and single voice coil simplify amplifier matching compared with multi-coil wiring arrangements. The driver uses a 60 mm voice coil, a high-density-flux ferrite motor, and a water-repellent pressed-paper cone.\u003c\/p\u003e\u003cp\u003eAudison engineers the cone, dustcap, and basket geometry to support long linear excursion while maintaining a compact mounting profile. The driver has 12.6 mm Xmax and an 18 mm mechanical excursion specification. Its motor assembly is optimized using finite-element modeling for control under high-power, high-excursion operating conditions.\u003c\/p\u003e\u003cp\u003eThe APS 10 S4S is a component subwoofer, so a separate enclosure, amplifier, wiring, and installation hardware are needed to complete a system. It can serve as a compact bass upgrade alongside factory or aftermarket speakers when installed in a correctly sized sealed enclosure. A steel mesh grille and plastic gasket are included to help protect the driver and finish the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Design:\u003c\/strong\u003e Provides compact bass capability with a 120 mm ultra-low profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Rating:\u003c\/strong\u003e Supports sustained subwoofer power handling in a properly configured system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Simplifies wiring to a compatible 4-ohm amplifier channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Optimization:\u003c\/strong\u003e Designed for sealed enclosures starting at 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the moving cone assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Protection Grille:\u003c\/strong\u003e Steel mesh grille helps protect the installed subwoofer driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 S4S combines a high-density-flux ferrite magnet with a 60 mm voice coil and water-repellent pressed-paper cone. Its basket includes vents beneath the spider, while the shallow geometry is designed to retain excursion capability in a compact format. The supplied steel mesh grille and plastic gasket provide practical finishing and protection components.\u003c\/p\u003e\u003cp\u003eInstall this driver in a custom sealed enclosure with at least 10 liters of volume, allowing for the driver’s 1.12-liter displacement during enclosure planning. Verify the 270 mm outside diameter, 233 mm Dimension B, and 88 mm mounting-depth measurement against the available mounting location before cutting. Use an amplifier that is stable at 4 ohms, set gains carefully, and configure the system’s crossover and enclosure construction for subwoofer use.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614230732870,"sku":"APS10S4S","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Exi-yjeZL.jpg?v=1784363040"},{"product_id":"audison-aps-8-d-prima-8-dual-4-ohm-shallow-subwoofer","title":"Audison APS 8 D Prima 8\" Dual 4-Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Audison APS 8 D is an 8-inch passive car subwoofer designed for installations where bass reinforcement is needed but enclosure depth and available space are limited. Its dual 4-ohm voice coils provide flexible wiring options for compatible amplifiers. It is intended for use in a compact sealed enclosure rather than as a free-air or loaded-box replacement.\u003c\/p\u003e\u003cp\u003eWith 250 watts continuous power handling and 500 watts peak power handling, the APS 8 D is suited to systems that need controlled low-frequency support without requiring a large subwoofer cabinet. Its 83.5 dB sensitivity and compact-driver format make correct amplifier matching and enclosure design especially important. The driver is designed around sealed-box use beginning at 7.5 liters.\u003c\/p\u003e\u003cp\u003eA 79 mm mounting depth helps the APS 8 D fit locations where a conventional full-depth subwoofer may not clear the rear wall of the enclosure or available vehicle structure. Audison uses a cone, dustcap, and basket geometry intended to retain useful linear excursion in this shallow format. The specified linear excursion is ±8.8 mm.\u003c\/p\u003e\u003cp\u003eThe water-repellent pressed-paper cone is paired with a high-density flux ferrite motor assembly for low-frequency reproduction in vehicle environments. Basket vents beneath the spider support cooling without a central pole vent. This design also allows the driver to be mounted closer to the rear wall of a properly built enclosure.\u003c\/p\u003e\u003cp\u003eThe APS 8 D is a practical choice for custom OEM-integration upgrades, compact hatchback or trunk installations, and systems using an external subwoofer amplifier. Its dual-coil configuration can be wired for a 2-ohm or 8-ohm final load when both coils are used, provided the amplifier is rated for that load. A steel mesh grille and plastic gasket are included for installation and driver protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Engineered for sealed enclosures starting at 7.5 liters, helping conserve cargo and installation space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e79 mm Mounting Depth:\u003c\/strong\u003e The low-profile basket supports installations with limited rear clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Enables series or parallel wiring options to suit compatible amplifier load ratings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W Continuous Handling:\u003c\/strong\u003e Provides a realistic continuous-power target for selecting an external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e±8.8 mm Linear Excursion:\u003c\/strong\u003e Supports meaningful cone travel within a shallow-subwoofer installation format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a pressed-paper cone material selected for automotive subwoofer duty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 8 D uses a high-density flux ferrite magnet, water-repellent pressed-paper cone, and a 40 mm voice-coil assembly. Its basket incorporates air vents beneath the spider rather than a central pole vent, and the surround and spider are designed to help control unwanted rocking motion. The included steel mesh grille provides physical protection, while the plastic gasket helps finish the mounting surface.\u003c\/p\u003e\u003cp\u003eInstall the APS 8 D in a sealed enclosure with at least 7.5 liters of internal volume; Audison documents an 8.5-liter, Qtc 0.85 sealed design as a suggested enclosure alignment. Confirm the 187 mm mounting cutout, 79 mm mounting depth, and rear clearance before building or modifying an enclosure. Wire the two 4-ohm voice coils in series for an 8-ohm load or in parallel for a 2-ohm load only when the amplifier is stable at the resulting impedance.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614231748678,"sku":"APS8D","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61jRcTTGCbL.jpg?v=1784363091"},{"product_id":"audison-aps-8-r-8-4-ohm-subwoofer","title":"Audison APS 8 R 8\" 4 Ohm Subwoofer","description":"\u003cp\u003eThe Audison APS 8 R is an 8-inch, 4-ohm subwoofer driver designed for vehicle audio systems where available enclosure depth is limited. It provides a 250-watt continuous power rating and is intended to add controlled low-frequency output without requiring a large driver. Its compact installation profile makes it a practical option for custom trunk, side-panel, or space-conscious enclosure projects.\u003c\/p\u003e\u003cp\u003eThis subwoofer is designed for a reflex, or ported, enclosure with a minimum internal volume of 8.5 liters. Audison specifies a recommended tuning range between 30 and 40 Hz for this application. That design focus makes the APS 8 R suitable for systems seeking bass extension from a compact ported enclosure.\u003c\/p\u003e\u003cp\u003eThe APS 8 R uses a water-repellent pressed-paper cone and a 40 mm voice coil. Its 8.8 mm Xmax supports substantial linear cone travel for its shallow form factor. The 84 dB sensitivity and 4-ohm impedance should be considered when selecting a compatible amplifier and system tuning.\u003c\/p\u003e\u003cp\u003eAudison uses a cone, dustcap, and basket geometry intended to preserve excursion while keeping mounting depth low. Basket vents located beneath the spider provide cooling without a central pole vent. This layout allows the driver to be mounted closer to the rear wall of an enclosure than designs requiring rear pole ventilation.\u003c\/p\u003e\u003cp\u003eThe APS 8 R fits naturally into an Audison Prima-based upgrade or a custom compact subwoofer system. It can be paired with an appropriately configured external amplifier and a properly designed ported enclosure. A steel mesh grille and plastic gasket are included to support installation and driver protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Inch Subwoofer Driver:\u003c\/strong\u003e Adds bass capability in a compact speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W Continuous Power:\u003c\/strong\u003e Supports amplifier matching for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible 4-ohm amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow 79 mm Mounting Depth:\u003c\/strong\u003e Helps fit restricted installation locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePorted-Enclosure Design:\u003c\/strong\u003e Optimized for reflex enclosures from 8.5 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket Venting:\u003c\/strong\u003e Supports cooling while allowing close rear-wall mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 8 R combines a water-repellent pressed-paper cone with a high-density flux ferrite motor assembly. Its motor is optimized using finite element modeling, while the surround and spider are designed to help control rocking-mode behavior. The supplied steel mesh grille and plastic gasket complement the driver for a finished installation.\u003c\/p\u003e\u003cp\u003eUse this subwoofer in a properly built reflex enclosure with at least 8.5 liters of internal volume and a 30-40 Hz tuning target. Confirm the 187 mm installation opening and 79 mm mounting depth against the available mounting location before cutting. Select an external amplifier compatible with a 4-ohm load, then set crossover, gain, and enclosure tuning carefully for the system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614232109126,"sku":"APS8R","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71fVrbU7MCL.jpg?v=1784363133"},{"product_id":"audison-apx4-4-2-way-coaxial-speakers","title":"Audison APX4 4\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX4 is a pair of 4-inch, 2-way coaxial car speakers designed for compact factory speaker locations. Its integrated woofer and tweeter arrangement provides a space-conscious way to upgrade systems that use 100 mm speakers. With a 4-ohm load and 40 watts of continuous power handling, it is suited to factory-radio upgrades or properly matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA concentric coaxial tweeter places the high-frequency driver at the center of the woofer for a single sound-emission point. This design is intended to support consistent phase response and a focused acoustic image from typical vehicle speaker positions. The tweeter also uses an acoustic lens designed for linear response in off-axis installations.\u003c\/p\u003e\u003cp\u003eThe APX4 covers a specified 80 Hz to 23 kHz frequency range, with 91 dB SPL sensitivity. Its compact format is useful where a larger door speaker will not fit or where an OEM-sized 4-inch opening is available. The 120-watt peak rating provides additional short-term power capacity when paired with a suitable audio system.\u003c\/p\u003e\u003cp\u003eAudison uses a water-repellent treated paper woofer cone with a profile developed through FEM simulation and optimized with Klippel Scan Vibrometer testing. The TPU surround uses the shallow Triple Wave profile to support excursion linearity. A 32 mm pure-copper woofer voice coil is paired with a 15 mm tweeter voice coil.\u003c\/p\u003e\u003cp\u003eFor installation flexibility, the APX4 uses a low-profile basket and has a 41 mm mounting depth. It can be considered for factory-location replacements where its mounting dimensions and 4-ohm impedance match the vehicle's requirements. Verify the available opening, mounting depth, wiring, and amplifier or head-unit compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter into one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 mm Woofer:\u003c\/strong\u003e Fits applications designed around a 4-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric Tweeter:\u003c\/strong\u003e Uses a single sound-emission point for coherent driver alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W Continuous Handling:\u003c\/strong\u003e Matches modest factory-radio or aftermarket amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave Surround:\u003c\/strong\u003e TPU surround profile supports controlled cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e41 mm Mounting Depth:\u003c\/strong\u003e Low-profile format helps with OEM-location installation planning.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX4 uses a water-repellent treated paper cone, a TPU surround, and a compact basket with abrasion-resistant, scratch-proof coating. Its motor is secured with damping epoxy adhesive. High-current fast-on terminals use double contacts on both positive and negative poles, with a temperature-resistant plastic terminal cover.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 100 mm speaker and provides at least the required 41 mm mounting depth before purchase. Observe speaker polarity when connecting the terminals, securely fasten the speakers to the vehicle structure, and keep wiring away from sharp edges, moving parts, heat sources, moisture, and vehicle electrical equipment. Protective grilles are not included; APG 4 grilles are available separately.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614232862790,"sku":"APX4","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71mrSm2nWzL.jpg?v=1784363186"},{"product_id":"audison-apx5-5-25-2-way-coaxial-speakers","title":"Audison APX5 5.25\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX5 is a 130 mm two-way coaxial speaker designed for compact factory-location upgrades in vehicle doors or rear panels. It combines a woofer and centrally mounted tweeter in one assembly, helping simplify installation where separate component speakers are not practical. With a 4-ohm nominal impedance and 50 W continuous power handling, it is suited to compatible factory radios or modest external amplification.\u003c\/p\u003e\u003cp\u003eThis speaker is intended for listeners seeking a clearer, more coherent upgrade from worn or basic OEM speakers while retaining a straightforward coaxial layout. Its concentric tweeter places high-frequency output at the same acoustic center as the woofer. Audison designs this arrangement to support a consistent in-phase response and soundstage presentation.\u003c\/p\u003e\u003cp\u003eThe APX5 uses a 5-inch-class woofer with a stated frequency response of 70 Hz to 23 kHz and 93 dB sensitivity. That range supports midbass and treble reproduction for full-range door or rear-fill duties, while a subwoofer can handle the lowest bass frequencies in a larger system. Its 150 W peak rating provides additional short-term power capacity beyond the 50 W continuous rating.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone and TPU Triple Wave suspension are used in the woofer assembly. The shallow suspension profile is engineered for linear excursion, with a stated Xmax of 2 mm. A 32 mm pure-copper woofer voice coil supports power handling and low-frequency control.\u003c\/p\u003e\u003cp\u003eThe APX5 is part of Audison's Prima speaker range and can be used as a direct-fit-style replacement when vehicle dimensions allow. Its low-profile basket and 48 mm mounting-depth dimension are intended to aid OEM integration. For systems needing added protection or a finished appearance, Audison lists the APG 5 protective grille set as a compatible accessory.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric Tweeter:\u003c\/strong\u003e Helps maintain a single acoustic emission point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 W Continuous Handling:\u003c\/strong\u003e Matches compatible factory radios and modest amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e93 dB Sensitivity:\u003c\/strong\u003e Supports useful output from moderate available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave Suspension:\u003c\/strong\u003e Supports controlled, linear woofer excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds durability for typical vehicle-door environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX5 uses a compact, abrasion-resistant and scratch-resistant coated basket with the motor secured using damping epoxy adhesive. Its woofer combines a treated paper cone, TPU surround, and 32 mm pure-copper voice coil. The integrated 24 mm tweeter includes an acoustic lens intended to maintain linear response in off-axis in-door placement.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 130 mm speaker and verify the available mounting opening, outer diameter, and depth before ordering. Audison lists dimensions of 119 mm for B, 48 mm for D, and 51 mm for C; installers should compare these measurements with the factory location and any adapter requirements. Connect the speakers to a compatible 4-ohm source and avoid exceeding the 50 W continuous power rating.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614233223238,"sku":"APX5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UQIenvESL.jpg?v=1784363228"},{"product_id":"audison-apx570-5-x-7-2-way-coaxial-speakers","title":"Audison APX570 5 x 7\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison APX570 is a pair of 5 x 7-inch, 2-way coaxial car speakers designed for replacement or upgrade use in compatible factory speaker locations. Its coaxial layout combines the woofer and tweeter into one assembly, helping simplify installations where separate tweeter mounting is not practical. With a 4-ohm impedance and 70-watt continuous power handling, it is suited to systems using a compatible factory radio or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA concentric 24 mm tweeter is positioned within the woofer so both drivers share a single point of sound emission. This arrangement is intended to support a more consistent phase response between high and low frequencies. An integrated acoustic lens is used to help maintain a linear response when the speakers are installed off-axis in vehicle doors.\u003c\/p\u003e\u003cp\u003eThe APX570 uses a water-repellent treated paper cone and a TPU surround with Audison's shallow Triple Wave profile. The surround profile is engineered to support linear cone excursion, while the 32 mm pure-copper woofer voice coil is designed for power handling and low-frequency control. Its published frequency response is 60 Hz to 23 kHz, with 93 dB sensitivity.\u003c\/p\u003e\u003cp\u003eFor OEM-oriented installations, the APX570 uses a compact, low-profile basket and a 63 mm mounting depth. The oval 5 x 7-inch format can suit vehicles equipped for this speaker shape, provided the factory opening, mounting pattern, window clearance, and connector arrangement are checked before installation. The speakers use high-current fast-on terminals with double contacts for both positive and negative connections.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a direct coaxial replacement where a compact all-in-one design is preferred over a separate component system. They are a practical match for listeners seeking an Audison Prima-series speaker upgrade without adding external tweeters or crossover housings. Grilles are not included, so installations behind factory door panels or with separately sourced grilles should be planned accordingly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 24 mm Tweeter:\u003c\/strong\u003e Uses a single emission point for consistent driver alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Continuous Handling:\u003c\/strong\u003e Supports compatible amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Helps support linear cone movement during excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds moisture resistance for typical door installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Basket:\u003c\/strong\u003e Supports OEM-oriented installation with a 63 mm mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APX570 has a water-repellent treated paper cone, TPU surround, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The centered tweeter incorporates an acoustic lens, and the speaker was developed using the KLIPPEL suite.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 5 x 7-inch speakers and compare the factory opening with the APX570's 182 x 126 mm mounting-hole dimensions before ordering. Allow for the published 63 mm mounting depth and verify clearance behind the mounting surface, including window travel in doors. Use the double-contact fast-on terminals with correct polarity, and note that grilles are not included.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614233714758,"sku":"APX570","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ywmFTbmVL.jpg?v=1784363272"},{"product_id":"audison-av-10-d2-ii-10-shallow-subwoofer","title":"Audison AV 10 D2 II 10\" Shallow Subwoofer","description":"\u003cp\u003eThe Audison AV 10 D2 II is a 10-inch shallow subwoofer designed to add controlled low-frequency output where installation depth and enclosure space are limited. Its dual 2-ohm voice-coil design gives system builders flexibility when matching the subwoofer to a compatible amplifier. It is a focused option for listeners building a compact, sound-quality-oriented car audio system.\u003c\/p\u003e\u003cp\u003eWith 550 watts RMS continuous power handling and an 1,100-watt peak rating, the AV 10 D2 II is built for substantial bass output without requiring an oversized driver. Its stated 25 Hz to 400 Hz frequency response supports low bass reproduction as well as flexible crossover integration. The sound character is intended to be deep, articulate, and controlled rather than loose or boomy.\u003c\/p\u003e\u003cp\u003eA 38.6 mm CCAW voice coil combines copper-clad aluminum wire construction with a glass-fiber former to support thermal management and moving-mass control. Audison's Airflow Venting Cooling system is designed to improve internal airflow around the motor structure. This helps the driver maintain more consistent operation during extended high-output use.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a die-cast aluminum chassis, high-density-flux ferrite magnet, polypropylene cone, and nitrile rubber surround. Its extended-profile dust cap and internal Radial Reinforcement Framework are intended to reinforce cone and basket behavior during high-excursion operation. The result is a rigid shallow-driver platform designed for accurate cone control.\u003c\/p\u003e\u003cp\u003eThe AV 10 D2 II is optimized for compact sealed enclosures, with Audison listing a 13.2 L recommended enclosure and also providing sealed and reflex enclosure designs. It can serve as the low-frequency foundation of a VOCE II speaker system or complement other quality front-stage components. A protective metal mesh grille and mounting screws are included for cone protection and installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Design:\u003c\/strong\u003e Fits systems where available mounting depth is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W RMS Handling:\u003c\/strong\u003e Supports sustained bass output with appropriate amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Balances thermal capability with reduced moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Helps manage heat during extended listening sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Enclosure Optimization:\u003c\/strong\u003e Delivers controlled bass from small sealed-box designs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 10 D2 II uses a die-cast aluminum basket for rigidity and heat dissipation, paired with a high-density-flux ferrite motor. Its polypropylene cone, nitrile rubber surround, glass-fiber voice-coil former, and reinforced mechanical structure are selected for stable operation at higher excursion. A black protective metal mesh grille is included to help protect the cone after installation.\u003c\/p\u003e\u003cp\u003eUse an enclosure designed around Audison's published recommendations and confirm the mounting cutout, depth, and clearance in the intended vehicle before installation. The dual 2-ohm coils should be wired only to an amplifier that is stable at the resulting load, with crossover and subsonic-filter settings matched to the enclosure type. Audison suggests a 70-80 Hz low-pass filter at 24 dB\/octave and a 15 Hz subsonic filter at 24 dB\/octave for its sealed-box design.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614234009670,"sku":"AV 10 D2 II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71RyxIU_0L.jpg?v=1784363310"},{"product_id":"audison-av-10-d4-ii-10-shallow-subwoofer","title":"Audison AV 10 D4 II 10\" Shallow Subwoofer","description":"\u003cp\u003eThe Audison AV 10 D4 II is a 10-inch shallow subwoofer driver designed for car audio systems that need authoritative low-frequency support without requiring a large enclosure. Its dual 4-ohm voice coil layout gives installers flexibility when matching the subwoofer to a compatible amplifier. It is intended for listeners building refined OEM-upgrade or custom systems where available cargo space is limited.\u003c\/p\u003e\u003cp\u003eThis VOCE II subwoofer is voiced for deep, controlled bass with a quick and defined character. Its 25-400 Hz frequency response and 550-watt continuous power handling make it suitable for systems that need a solid low-end foundation while maintaining clear integration with the front speakers. The compact sealed-box focus makes it especially practical for space-conscious installations.\u003c\/p\u003e\u003cp\u003eA 38.6 mm CCAW voice coil combines copper-clad aluminum wire construction with a glass-fiber former. Audison pairs this assembly with its Airflow Venting Cooling system to help manage heat during sustained playback. The result is a design intended to retain consistent behavior when driven by an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eThe AV 10 D4 II uses a die-cast aluminum basket, high-density-flux ferrite magnet, polypropylene cone, and extended-profile dust cap. Its Radial Reinforcement Framework is designed to add structural support beneath the cone, while the FEM-optimized magnetic circuit concentrates magnetic flux at the voice-coil gap. These construction details support controlled excursion and mechanical stability.\u003c\/p\u003e\u003cp\u003eFor a straightforward upgrade path, the AV 10 D4 II can be installed in a custom sealed enclosure or paired with a compatible Audison enclosure solution. Audison specifies compact sealed enclosures around 12-14 liters for its intended performance character. Heavy-duty spring terminals and integrated cable-routing hooks help support a clean, serviceable installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible mono amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Supports sustained power in properly configured systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Balances low moving mass with thermal capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Helps manage voice-coil heat during extended playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Delivers controlled bass from smaller enclosure volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Metal Grille:\u003c\/strong\u003e Helps protect the cone after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 10 D4 II is built around a die-cast aluminum chassis with a magnet cover, a high-density-flux ferrite motor, and a polypropylene cone. Its extended-profile dust cap and Radial Reinforcement Framework are engineered to increase cone rigidity and damping. Audison also includes a black metal mesh grille and mounting screws for cone protection and finishing detail.\u003c\/p\u003e\u003cp\u003eUse this subwoofer with an amplifier whose output and minimum stable impedance suit the selected dual-voice-coil wiring configuration. Audison recommends compact sealed enclosures in the 12-14 L range, with published compact and performance sealed-box plans available for custom fabrication. Set a low-pass filter around 70-80 Hz at 24 dB\/octave, and use adequate enclosure clearance for the driver and its wiring terminals.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614234370118,"sku":"AV 10 D4 II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71RyxIU_0L_17519553-d352-4766-858d-c66c00f3c5bc.jpg?v=1784363349"},{"product_id":"audison-av-12-d2-ii-12-dual-2-ohm-subwoofer","title":"Audison AV 12 D2 II 12\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Audison AV 12 D2 II is a 12-inch dual-2-ohm subwoofer designed for vehicle audio systems that need substantial low-frequency output without requiring an oversized enclosure. Its dual voice coils provide wiring flexibility when matching the subwoofer to a compatible mono or multi-channel amplifier. The design is intended for listeners building a sound-quality-focused bass system in a limited amount of vehicle space.\u003c\/p\u003e\u003cp\u003eWith 550 watts continuous power handling and 1,100 watts peak power handling, the AV 12 D2 II is built for amplified systems with appropriately matched power. Its 25 to 400 Hz frequency-response specification supports use as a dedicated low-frequency driver. The 85 dB sensitivity rating and 23 Hz resonant frequency reflect a design centered on controlled bass extension rather than shallow, decorative installation.\u003c\/p\u003e\u003cp\u003eA 38.6 mm CCAW voice coil uses copper-clad aluminum wire to balance thermal capability with reduced moving mass. The motor system uses a high-density-flux ferrite magnet, while Audison Airflow Venting Cooling technology is designed to help manage voice-coil temperature during sustained operation. These elements support stable performance when the subwoofer is installed, filtered, and powered within its specifications.\u003c\/p\u003e\u003cp\u003eThe polypropylene cone uses a FEM-optimized dust cap and a radial reinforcement framework beneath the cone to increase rigidity during high-excursion movement. A nitrile-rubber surround supports the cone through its rated 16.8 mm Xmax. Together with the die-cast aluminum chassis, these materials are intended to maintain controlled cone motion and durable operation.\u003c\/p\u003e\u003cp\u003eThe AV 12 D2 II can be used in sealed or vented enclosure designs, with manufacturer data provided for compact and performance-oriented examples. It is supplied with a protective metal mesh grille and mounting screws for cone protection. Pair it with an amplifier that is stable at the final impedance created by the selected series or parallel voice-coil wiring, and use the manufacturer enclosure and crossover guidance as the foundation for system tuning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports series or parallel wiring options for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Accommodates substantial amplifier power when correctly configured.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Combines thermal capability with reduced moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Helps dissipate heat around the voice coil.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Polypropylene Cone:\u003c\/strong\u003e Supports rigid, controlled movement at high excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Metal Grille:\u003c\/strong\u003e Helps protect the cone in exposed installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 12 D2 II uses a die-cast aluminum basket, high-density-flux ferrite magnet, polypropylene cone, nitrile-rubber surround, glass-fiber former, and CCAW voice coil. The basket includes cable-routing hooks, and the spring-loaded terminals accept up to 8 AWG speaker cable. A black metal mesh grille and mounting screws are included.\u003c\/p\u003e\u003cp\u003eUse the 284 mm mounting-hole specification when planning the baffle cutout, and allow sufficient rear clearance for the listed mounting dimensions. Audison provides sealed and reflex enclosure examples; the compact sealed design uses 21 L, while the compact reflex design uses 27.1 L tuned to 26.5 Hz. Confirm the final load presented by the dual 2-ohm coils before selecting an amplifier, and apply suitable low-pass and subsonic filtering for the chosen enclosure type.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614234730566,"sku":"AV 12 D2 II","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71wFZmN33yL.jpg?v=1784363392"},{"product_id":"audison-av-12-d4-ii-12-dual-4-ohm-subwoofer","title":"Audison AV 12 D4 II 12\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Audison AV 12 D4 II is a 300 mm (12-inch) dual-voice-coil subwoofer designed for high-performance car audio systems. It adds low-frequency extension where factory speakers or smaller subwoofers cannot provide sufficient bass depth. Its dual 4-ohm voice coil configuration gives installers useful wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eBuilt for controlled bass reproduction, the AV 12 D4 II is intended for listeners who want a detailed low end without requiring an oversized enclosure. It is optimized for sealed-box use and is suited to installations where available cargo or cabin space is limited. Audison rates it for 550 watts continuous power handling and 1100 watts peak power handling.\u003c\/p\u003e\u003cp\u003eA 38.6 mm (1.5-inch) CCAW voice coil combines copper-clad aluminum wire construction with a glass-fiber former. The motor structure uses a ferrite magnet and Airflow Venting Cooling technology to help manage heat during sustained operation. This design supports consistent performance when the subwoofer is driven by an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eThe polypropylene cone uses an extended-profile dust cap and Radial Reinforcement Framework to improve structural stability during excursion. Audison also uses FEM optimization in the magnetic circuit and dust-cap design to support cone rigidity and damping. The result is a subwoofer engineered for clean, controlled bass across its 25 to 400 Hz rated frequency response.\u003c\/p\u003e\u003cp\u003eThe AV 12 D4 II fits naturally into a VOCE II-based upgrade or a custom active system using a dedicated subwoofer amplifier. Its 4+4-ohm configuration can be wired in series or parallel according to the amplifier's approved impedance range. A protective metal mesh grille is included for installations where the cone may be exposed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports flexible series or parallel wiring with a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Provides substantial power capacity for a dedicated bass channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.5-Inch CCAW Voice Coil:\u003c\/strong\u003e Helps balance thermal handling with reduced moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Directs airflow through internal channels to manage voice-coil heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Polypropylene Cone:\u003c\/strong\u003e Uses R.R.F. structure and an extended-profile dust cap for stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Basket:\u003c\/strong\u003e Provides a rigid platform with integrated cable-routing hooks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 12 D4 II uses a die-cast aluminum chassis, ferrite magnetic assembly, polypropylene cone, nitrile-rubber surround, and glass-fiber voice-coil former. Its basket incorporates a magnet cover and dual cable-routing hooks, while spring-loaded horizontal terminals accept up to 8 AWG cable. A black metal mesh grille and mounting screws are included to protect the driver in exposed installations.\u003c\/p\u003e\u003cp\u003ePlan the enclosure and amplifier together before installation. Audison publishes sealed and reflex enclosure designs, including a 21 L compact sealed alignment with a 284 mm mounting hole; verify mounting depth, clearance, and final internal air volume in the vehicle. Use an amplifier stable at the final impedance created by the selected series or parallel voice-coil wiring, and apply the published crossover guidance as a starting point for system tuning.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614236663878,"sku":"AV 12 D4 II","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71wFZmN33yL_17a6ea90-65ce-40bf-987f-ada3ad70bf25.jpg?v=1784363441"},{"product_id":"audison-av1-1ii-1-1-tweeter-set","title":"Audison AV1-1II 1.1\" Tweeter Set","description":"\u003cp\u003eThe Audison AV1-1II is a pair of 28 mm (1.1 in.) Voce II component tweeters designed to upgrade the high-frequency range of a car audio system. It is intended for systems that need clearer treble detail, more controlled upper-frequency output, and flexible mounting options. With a 4-ohm nominal impedance, the AV1-1II is suited to appropriately configured aftermarket speaker systems.\u003c\/p\u003e\u003cp\u003eIts Hi-Res Audio certification and 1,000 to 40,000 Hz frequency-response specification support extended high-frequency playback. The larger 28 mm Tetolon soft dome is designed to provide smooth, natural treble character while maintaining useful off-axis response in vehicle cabins. This makes it a practical choice for dash, sail-panel, or A-pillar locations where listeners are not directly on-axis with the tweeters.\u003c\/p\u003e\u003cp\u003eA 28 mm CCAW voice coil is wound on an aluminum former and paired with a neodymium magnetic motor. This combination is engineered for low moving mass, thermal stability, and controlled transient response. Audison specifies a 900 Hz resonant frequency and 91 dB sensitivity for the AV1-1II.\u003c\/p\u003e\u003cp\u003eThe AV1-1II uses Audison AIF (Any Install Faceplate) technology to support different mounting approaches. Included mounting hardware includes a watch-band mount, double-angle cup, flush-mounting ring, and metal mounting spring. Mesh and spoke grille options provide additional installation and appearance flexibility.\u003c\/p\u003e\u003cp\u003eFor an active DSP-based system, Audison recommends high-pass filtering the AV1-1II as low as 1,800 Hz with a 24 dB\/octave Linkwitz-Riley slope when paired in a two-way system with a 6.5-inch woofer. When used with a smaller midrange such as the AV 3.0 II, Audison recommends a crossover point around 3,000 Hz. The tweeters can also be used as part of compatible Voce II passive or active component-system configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certified:\u003c\/strong\u003e Supports extended response up to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Dome:\u003c\/strong\u003e Delivers smooth and natural high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Helps reduce moving mass and dynamic compression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Provides a compact, high-flux magnetic assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Faceplate System:\u003c\/strong\u003e Supports multiple mounting and aiming options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Grade Connector:\u003c\/strong\u003e Enables convenient serviceable wiring connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV1-1II combines a Tetolon-fibre dome and surround with a 28 mm CCAW voice coil, aluminum former, and neodymium magnet. It does not use ferrofluid. The supplied faceplates, mounting accessories, grille options, pre-wired P\u0026amp;P cable, and Audison logo badges support a tailored installation.\u003c\/p\u003e\u003cp\u003eUse the included flush ring, watch-band mount, double-angle cup, or metal spring according to the available vehicle location and desired aiming. The tweeter provides standard terminals plus an OEM-grade two-pin connection, with a matching bare-wire pigtail included for connection by solder or mechanical crimp. Use an appropriate high-pass crossover; for active DSP systems, Audison recommends 1,800 Hz at 24 dB\/octave in a two-way alignment with a 6.5-inch woofer.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614237155398,"sku":"AV1-1II","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81zalMdi5RL.jpg?v=1784363486"},{"product_id":"audison-av-3-0-ii-3-midrange-speakers","title":"Audison AV 3.0 II 3\" Midrange Speakers","description":"\u003cp\u003eThe Audison AV 3.0 II is a compact 70 mm midrange speaker designed to reproduce the vocal and instrument range in an upgraded car audio system. It is intended for systems where a dedicated midrange driver can improve placement and detail compared with relying on a door woofer alone. Its compact format supports installations where space is limited, including suitable door and A-pillar locations.\u003c\/p\u003e\u003cp\u003eThis speaker is a practical choice for builders assembling a three-way front stage with separate tweeters and woofers. Its 50 W continuous power handling and 90 dB sensitivity make it suitable for a properly configured amplified system. The AV 3.0 II is engineered for controlled mid-frequency output from 160 Hz to 13 kHz.\u003c\/p\u003e\u003cp\u003eA semi-pressed paper cone with cotton fibers combines low mass with mechanical damping for natural midrange reproduction. The rubber surround and optimized suspension are designed to support controlled cone movement. FEM-designed cone geometry is used to promote more consistent dispersion for listeners seated off-axis in a vehicle cabin.\u003c\/p\u003e\u003cp\u003eThe AV 3.0 II uses a 26 mm CCAW voice coil, neodymium motor, and built-in copper shorting ring. This motor arrangement is designed to reduce inductance modulation and support upper-midrange extension. Its die-cast aluminum basket provides a rigid chassis structure while the compact motor layout keeps mounting depth to 31.2 mm.\u003c\/p\u003e\u003cp\u003eFor system integration, the AV 3.0 II provides both conventional terminals and an OEM-style two-pin connector with an included bare-wire pigtail. A black mesh metal grille is included to protect the driver after installation. It is designed to work as a dedicated midrange in an actively filtered system or with an appropriately matched three-way crossover network.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 mm Midrange Driver:\u003c\/strong\u003e Adds a dedicated driver for vocals, instruments, and central soundstage detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-Pressed Paper Cone:\u003c\/strong\u003e Cotton-fiber pulp construction balances low mass, rigidity, and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e26 mm CCAW Voice Coil:\u003c\/strong\u003e Supports efficient motor control and heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper Shorting Ring:\u003c\/strong\u003e Reduces inductance modulation for clearer upper-midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Delivers magnetic strength in a compact mounting format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Connection Options:\u003c\/strong\u003e OEM-style connector and standard terminals simplify system integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 3.0 II combines an aluminum chassis, neodymium magnet, glass-fiber voice-coil former, semi-pressed paper cone, and rubber surround. Its die-cast basket is designed for rigidity and airflow around the moving assembly. The included black mesh grille protects the speaker, while optional AVG 3.0 S II silver grilles provide an alternate appearance.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space against the 84 mm outer diameter and 31.2 mm mounting depth before installation. The supplied OEM-style pigtail can be soldered or crimped to vehicle speaker wiring, while standard terminals remain available as an alternative. For active DSP systems, Audison recommends a 300-500 Hz Linkwitz-Riley high-pass filter at 24 dB\/octave, with a symmetrical low-pass filter set at the tweeter's high-pass frequency.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614237581382,"sku":"AV3-0II","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71QWvVq3cjL.jpg?v=1784363532"},{"product_id":"audison-av-6-5-p-ii-6-5-woofer","title":"Audison AV 6.5 P II 6.5\" Woofer","description":"\u003cp\u003eThe Audison AV 6.5 P II is a 165 mm (6.5 in.) VOCE II component woofer designed for front-door mid-bass and midrange duty in a high-quality car audio system. Its 4-ohm design and 150 W continuous power handling make it suitable for amplified speaker upgrades where factory door speakers lack output, control, or clarity. The driver is intended to reproduce bass and lower-to-upper midrange frequencies rather than function as a full-range coaxial speaker. It is a practical choice for custom active systems or matched component installations.\u003c\/p\u003e\u003cp\u003eA 40 mm CCAW voice coil supports the woofer's power handling and excursion capability while helping manage heat. The specified frequency response is 45 to 7,500 Hz at -6 dB, providing useful bandwidth for a door-mounted woofer paired with a tweeter or midrange. With a 91 dB sensitivity rating measured at 2.83 V\/1 m, it is positioned for systems that balance amplifier power with efficient output. Its low 0.3 mH inductance also supports extension into the upper midrange.\u003c\/p\u003e\u003cp\u003eThe AV 6.5 P II uses a semi-pressed paper cone with cotton fibers and a rubber surround. This material combination is selected to keep the moving assembly light while maintaining damping and cone control. A glass-fiber former supports the voice coil, while the high-density-flux ferrite motor provides the magnetic drive. The die-cast aluminum basket and magnet cover contribute to a rigid installation structure.\u003c\/p\u003e\u003cp\u003eAudison incorporates a T-shaped pole piece with an aluminum shorting ring in the motor assembly to reduce inductance-related effects and help linearize response during excursion. The magnetic circuit geometry is FEM optimized to concentrate magnetic flux at the voice coil. These details are intended to support clean, controlled mid-bass response and useful off-axis performance in vehicle door locations. The driver has 4.95 mm of Xmax and 7.5 mm of mechanical excursion.\u003c\/p\u003e\u003cp\u003eThe AV 6.5 P II fits naturally into a VOCE II front stage with compatible tweeters, midranges, and crossover options. For an active DSP system, Audison recommends a Linkwitz-Riley 24 dB\/octave high-pass filter as low as 70 Hz, with a symmetrical low-pass point matched to the associated tweeter or midrange. OEM-style two-pin and standard terminal connections provide wiring flexibility during installation and service. Optional AVG 6.5 B II and AVG 6.5 S II mesh grilles are available separately for exposed installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm CCAW Voice Coil:\u003c\/strong\u003e Supports 150 W continuous power handling and heat management.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Inductance Motor:\u003c\/strong\u003e Aluminum shorting ring helps extend upper-midrange performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFEM-Optimized Magnetic Circuit:\u003c\/strong\u003e Focuses magnetic flux for controlled, efficient operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-Pressed Paper Cone:\u003c\/strong\u003e Cotton-fiber cone balances low mass with damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum Basket:\u003c\/strong\u003e Provides a rigid chassis with a magnet cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Connection Options:\u003c\/strong\u003e OEM-style connector and standard terminals simplify integration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThis woofer combines an aluminum chassis, high-density-flux ferrite magnet, glass-fiber voice-coil former, CCAW winding, semi-pressed paper cone, and rubber surround. Its 100 x 45 x 18 mm magnetic assembly and 1.6 kg weight reflect its substantial motor structure. The 165 mm outer diameter, 140.8 mm mounting diameter, and 74.2 mm overall depth should be checked against the vehicle's speaker opening and door clearance before installation.\u003c\/p\u003e\u003cp\u003eUse an amplifier stable at a 4-ohm speaker load and set gain conservatively for the 150 W continuous rating. In an active DSP installation, Audison recommends a 70 Hz Linkwitz-Riley 24 dB\/octave high-pass filter as a minimum starting point; set the low-pass filter symmetrically with the associated tweeter or midrange crossover point. The driver offers standard terminals plus an OEM-grade two-pin connector; the supplied bare-wire pigtail can be soldered or crimped to the vehicle speaker wiring.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614238892102,"sku":"AV6-5PII","price":749.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71rn7fUFJvL.jpg?v=1784363580"},{"product_id":"audison-avbx-10-d4-ii-10-sealed-subwoofer-enclosure","title":"Audison AVBX 10 D4 II 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Audison AVBX 10 D4 II is a compact, passive 10-inch sealed subwoofer enclosure designed for vehicle audio systems where installation space is limited. It combines a factory-loaded AV 10 D4 II dual-voice-coil subwoofer with an enclosure acoustically matched to the driver. This makes it a practical low-frequency upgrade for OEM-integrated and custom car audio systems.\u003c\/p\u003e\u003cp\u003eIts sealed, ultra-shallow enclosure is intended to produce controlled and articulate bass while taking up less space than a conventional large subwoofer box. The 25-400 Hz frequency response supports low-bass reproduction as well as integration with a properly configured front speaker system. With 550 watts continuous power handling, it is suited to an external amplifier selected and set up for the subwoofer's dual 4-ohm voice-coil configuration.\u003c\/p\u003e\u003cp\u003eThe AVBX 10 D4 II uses a 4+4-ohm dual voice coil, giving an installer flexibility when planning amplifier and system wiring. The loaded AV 10 D4 II driver uses a CCAW voice coil, glass-fiber former, polypropylene cone with mica injection, and rubber surround. Its 16.8 mm Xmax and 20 mm Xmech specifications support controlled cone travel within the enclosure design.\u003c\/p\u003e\u003cp\u003eAudison builds the enclosure from 15 mm high-density MDF and adds internal bracing to help limit panel vibration and unwanted enclosure resonance. The driver uses an aluminum chassis and high-density-flux ferrite magnet assembly. Together, these construction details support a rigid platform for the installed subwoofer.\u003c\/p\u003e\u003cp\u003eFor placement flexibility, Audison's 2S² architecture allows the AVBX 10 D4 II to be used in either down-firing or up-firing orientation. Its Sub Smart Plug terminal combines a plug-and-play quick-release connection with conventional push terminals. This makes the enclosure appropriate for installations that require accessible wiring or periodic removal for cargo-space use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Loaded Enclosure:\u003c\/strong\u003e A complete sealed subwoofer box with a 250 mm AV 10 D4 II driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Supports systems using an appropriately matched external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Design:\u003c\/strong\u003e Helps fit bass reinforcement into space-conscious vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm MDF Construction:\u003c\/strong\u003e High-density panels and internal bracing help control enclosure vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation System:\u003c\/strong\u003e Supports either down-firing or up-firing placement in the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVBX 10 D4 II uses a sealed enclosure constructed from 15 mm high-density MDF with internal bracing. The installed subwoofer features an aluminum chassis, high-density-flux ferrite magnet, CCAW voice coil, glass-fiber former, polypropylene-with-mica cone, and rubber surround. Audison specifies a compact enclosure footprint with dimensions identified as A: 531 mm, B: 361 mm, and C: 160 mm.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer box, so it requires an external amplifier and proper speaker wiring; an installer should account for the dual 4-ohm voice coils when designing the final load. Use the Sub Smart Plug connection for quick removal where appropriate, or use the integrated push terminals for conventional wiring. Confirm vehicle clearance, mounting security, amplifier compatibility, and the intended up-firing or down-firing orientation before installation.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614239252550,"sku":"AVBX 10 D4 II","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81NZcuA8DHL.jpg?v=1784363628"},{"product_id":"audison-avbx-12-d4-ii-12-sealed-subwoofer-box","title":"Audison AVBX 12 D4 II 12\" Sealed Subwoofer Box","description":"\u003cp\u003eThe Audison AVBX 12 D4 II is a loaded 12-inch passive subwoofer enclosure designed for vehicle systems that need substantial low-frequency support without requiring a deep enclosure. Its sealed, ultra-shallow format helps it fit more easily in space-conscious trunk and cargo-area installations. It is built around the matching Audison AV 12 D4 II dual-voice-coil subwoofer.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners building an OEM-upgrade or custom car-audio system who want controlled bass from a ready-to-install box. The sealed alignment is engineered for defined bass notes and natural decay rather than the character of a ported enclosure. Its 25-400 Hz rated frequency response supports integration with a properly configured front speaker system.\u003c\/p\u003e\u003cp\u003eThe installed AV 12 D4 II driver uses dual 4-ohm voice coils, providing flexibility when planning amplifier load and wiring configuration. It is rated for 550 watts continuous power handling and 1100 watts peak power handling. A 84.5 dB sensitivity rating and 16.8 mm Xmax support meaningful low-frequency output when paired with a suitable amplifier.\u003c\/p\u003e\u003cp\u003eAudison uses a high-density 15 mm MDF enclosure with internal bracing to help control panel vibration and enclosure resonance. The loaded driver combines an aluminum chassis, high-density-flux ferrite magnet, CCAW voice coil, glass-fiber former, and polypropylene cone with mica injection. These materials are selected to support rigidity, excursion control, and dependable thermal behavior.\u003c\/p\u003e\u003cp\u003eThe AVBX 12 D4 II is part of Audison's VOCE II system family and can serve as the bass foundation of a component-speaker upgrade. Its 2S² architecture supports either down-firing or up-firing placement according to available vehicle space and acoustic goals. The integrated Sub Smart Plug terminal provides both plug-and-play and push-connector connection options for system integration and service access.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 12-Inch Enclosure:\u003c\/strong\u003e Includes the AV 12 D4 II subwoofer in a purpose-matched sealed box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility when matching a compatible subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Supports substantial amplifier power with appropriate setup and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Design:\u003c\/strong\u003e Helps preserve cargo space while supporting controlled bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm Braced MDF Cabinet:\u003c\/strong\u003e Adds enclosure rigidity and helps reduce unwanted panel resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation Architecture:\u003c\/strong\u003e Allows down-firing or up-firing placement to suit the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVBX 12 D4 II uses a sealed enclosure constructed from high-density 15 mm MDF with internal bracing. Its driver features an aluminum chassis, high-density-flux ferrite magnet, CCAW voice coil, glass-fiber former, polypropylene-with-mica cone, and rubber surround. The enclosure measures 607 mm by 401 mm by 175 mm across dimensions A, B, and C in Audison's dimensional drawing.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer box, so it requires a separate compatible amplifier, wiring, and signal integration in the vehicle. Use the dual 4-ohm voice-coil configuration only with an amplifier that is stable at the resulting wired load, and set crossover and gain controls correctly for the system. Measure the intended mounting area before purchase, then choose down-firing or up-firing orientation based on clearance and the desired installation layout.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614240596038,"sku":"AVBX 12 D4 II","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81DRsulNAfL.jpg?v=1784363677"},{"product_id":"audison-avk-6a-p-ii-6-5-2-way-active-speaker-kit","title":"Audison AVK 6A P II 6.5\" 2-Way Active Speaker Kit","description":"\u003cp\u003eThe Audison AVK 6A P II is a 6.5-inch two-way active component speaker kit built around separate AV 6.5 P II mid-bass drivers and AV 1.1 II tweeters. It is intended for vehicle audio systems using an active crossover, DSP, or separate amplifier channels rather than an included passive crossover network. This configuration gives an installer control over crossover frequency, level, time alignment, and equalization.\u003c\/p\u003e\u003cp\u003eThe AV 6.5 P II woofer is rated for 150 watts continuous power handling and uses a 40 mm CCAW voice coil. Its 45-7,500 Hz frequency response, pressed paper cone, ferrite motor, and 4-ohm nominal impedance support use as the mid-bass foundation of an active front stage. The woofer is designed to cover bass and midrange duties before handing off to the separate tweeter.\u003c\/p\u003e\u003cp\u003eThe AV 1.1 II tweeter uses a 28 mm Tetolon fiber dome and has a stated frequency response of 1,000-40,000 Hz. It is Hi-Res Audio compliant under the stated JAS\/IEC 60268-5 test condition. Its extended upper-frequency range and separate mounting hardware help accommodate typical off-axis vehicle placements.\u003c\/p\u003e\u003cp\u003eBecause this is the active version of the AVK 6 P II system, no passive crossovers are included. Audison recommends a 24 dB\/octave Linkwitz-Riley high-pass filter as low as 1,800 Hz for the AV 1.1 II when paired in a two-way system with a 6.5-inch woofer. The AV 6.5 P II can be high-pass filtered as low as 70 Hz with the same filter alignment.\u003c\/p\u003e\u003cp\u003eThe kit is suited to enthusiasts and installers assembling a DSP-based front-stage upgrade with independent woofer and tweeter channels. OEM-style two-pin connectors and standard terminals provide wiring flexibility, while supplied pigtail wiring supports service-friendly disconnection. Optional Audison AVG 6.5 B II or AVG 6.5 S II grilles are available separately for the woofers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Two-Way Configuration:\u003c\/strong\u003e Separates woofer and tweeter filtering for DSP-based system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous Woofer Rating:\u003c\/strong\u003e Supports substantial mid-bass power handling with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm CCAW Woofer Coil:\u003c\/strong\u003e Helps support excursion capability and heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Inductance Motor Design:\u003c\/strong\u003e Aluminum shorting ring supports cleaner upper-midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting System:\u003c\/strong\u003e Faceplates and multiple mounting accessories aid installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 P II combines a die-cast aluminum basket, magnet cover, high-density-flux ferrite magnet, pressed paper cone, and butyl rubber surround. Its motor incorporates an aluminum shorting ring, while the 28 mm AV 1.1 II tweeter uses a Tetolon fiber dome and neodymium magnet. The woofer has a 165 mm overall diameter, a 140.8 mm Dimension B measurement, and a 74.2 mm Dimension C measurement; installation clearance should be verified against the vehicle and the supplied dimensional drawing.\u003c\/p\u003e\u003cp\u003eThis kit needs an active crossover solution such as a DSP and separate amplified channels for the tweeters and woofers, because passive crossovers are not supplied. Audison specifies 24 dB\/octave Linkwitz-Riley filtering, with the tweeter high-passed from 1,800 Hz in a two-way alignment and the woofer high-passed from 70 Hz. The package includes woofer and tweeter drivers, faceplates, four tweeter mounting accessories, a plug-and-play cable, and Audison logo badges.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614241873990,"sku":"AVK6APII","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TLlGEKfLL.jpg?v=1784363738"},{"product_id":"audison-avk6sii-6-5-2-way-component-speaker-kit","title":"Audison AVK6SII 6.5\" 2-Way Component Speaker Kit","description":"\u003cp\u003eThe Audison AVK6SII is a 6.5-inch, 2-way component speaker kit designed for a front-stage car audio upgrade. It pairs separate AV 6.5 S II mid-bass woofers with AV 1.0 II tweeters and dedicated passive crossover networks. The separate-driver layout allows the tweeters to be positioned higher in the cabin while the woofers fit typical door or kick-panel locations.\u003c\/p\u003e\u003cp\u003eThis kit is intended for listeners who want more controlled mid-bass, clearer vocals, and extended treble than a coaxial or factory speaker arrangement can typically provide. The 6.5-inch woofers are rated for 125 watts continuous power each and use a 36 mm CCAW voice coil. Their 50 Hz to 5.5 kHz operating range supports use as the mid-bass foundation of a two-way front stage.\u003c\/p\u003e\u003cp\u003eThe AV 1.0 II tweeters use 25.4 mm Tetolon fiber domes and are Hi-Res Audio certified with response specified to 40 kHz. Their compact form and supplied mounting hardware support flush, angled, and surface-oriented placement choices. This can be useful where factory sail panels, A-pillars, or custom tweeter locations place the listener off-axis.\u003c\/p\u003e\u003cp\u003eAudison separates the passive networks into an AVCX 2 W low-pass crossover for each woofer and an AVCX 2 T high-pass crossover for each tweeter. The woofer section uses a 6 dB\/octave low-pass network, while the tweeter section uses a 12 dB\/octave high-pass network. The crossover system is set around 3.5 kHz with the woofer Mid-Contour control off, and it provides adjustments for tweeter output and woofer mid-contour response.\u003c\/p\u003e\u003cp\u003eThe AVK6SII is suitable for a passive two-channel installation or for a system planned around bi-amplification. It includes plug-and-play speaker pigtails alongside standard speaker terminals, which can simplify serviceability and vehicle integration. For an active DSP-based installation, Audison specifies a 3 kHz, 24 dB\/octave high-pass point for the AV 1.0 II tweeter and a 70 Hz, 24 dB\/octave high-pass point for the AV 6.5 S II woofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support more flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125 W Continuous Woofer Rating:\u003c\/strong\u003e Supports matching with appropriately powered external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res AV 1.0 II Tweeters:\u003c\/strong\u003e Extends high-frequency response to a specified 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Woofer Voice Coil:\u003c\/strong\u003e A 36 mm coil supports excursion and thermal handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Dedicated woofer and tweeter networks simplify component placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Response Controls:\u003c\/strong\u003e Adjust tweeter level and woofer mid-contour for the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 S II woofer combines a pressed paper cone, butyl rubber surround, die-cast aluminum basket, and high-density-flux ferrite magnet assembly. Its motor includes an aluminum shorting ring to reduce inductance, while the 36 mm copper-clad aluminum voice coil is paired with a compact 61 mm mounting-depth specification. The AV 1.0 II uses a Tetolon fiber dome and AIF faceplate system with four supplied faceplates.\u003c\/p\u003e\u003cp\u003eConfirm available door clearance and the required 140.8 mm woofer mounting opening before installation; the woofer has a 165 mm outside diameter and 61 mm mounting depth. Install each AVCX 2 W and AVCX 2 T crossover in a dry, secure location and follow the labeled wiring layout for passive or bi-amplified operation. The kit includes mounting options for the tweeters, plus OEM-style two-pin pigtails that may be soldered or crimped to vehicle wiring.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242234438,"sku":"AVK6SII","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ql6H74ILL.jpg?v=1784363782"},{"product_id":"audison-avx-6-5-ii-6-5-2-way-coaxial-speakers","title":"Audison AVX 6.5 II 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison AVX 6.5 II is a 6.5-inch, 2-way coaxial speaker set from the VOCE II line. It combines a 165 mm woofer and centrally mounted 25.4 mm dome tweeter in each speaker, providing a compact solution where separate tweeter locations are not practical. The set is intended for vehicle audio upgrades that need broad bandwidth and a cohesive point-source layout.\u003c\/p\u003e\u003cp\u003eIts coaxial architecture places the tweeter at the center of the woofer, helping the two drivers originate sound from the same location. This is useful in door, rear-deck, or factory-style speaker positions where listening angles vary. The rated low-frequency response extends from 45 Hz, while high-frequency response reaches 40 kHz.\u003c\/p\u003e\u003cp\u003eThe woofer uses a semi-pressed paper cone, rubber surround, aluminum chassis, 40 mm CCAW voice coil, and high-density-flux ferrite magnet. The central tweeter uses a Tetolon fibre dome and surround, 25 mm CCAW voice coil, and neodymium magnet. These materials support the AVX 6.5 II's wide operating range in a compact coaxial format.\u003c\/p\u003e\u003cp\u003eAudison supplies separate passive crossover modules for the woofer and tweeter: AVCX 2 XW and AVCX 2 XT. This separates the filtering duties rather than using a single shared inline network. The speaker can alternatively be used in an active two-way system with DSP-based filtering and separate amplifier channels for the woofer and tweeter sections.\u003c\/p\u003e\u003cp\u003eThe AVX 6.5 II suits installations seeking an upgraded 6.5-inch coaxial solution with passive-crossover flexibility and an active-system upgrade path. OEM-style 2-pin connectors with bare-wire pigtails are included for serviceable vehicle wiring, while conventional speaker terminals remain available. Confirm available mounting clearance and the vehicle's speaker mounting arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one vehicle-friendly speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certification:\u003c\/strong\u003e Supports high-frequency reproduction extending to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 1-Inch Tweeter:\u003c\/strong\u003e Centers the tweeter within the woofer for point-source emission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Includes dedicated AVCX 2 XW and AVCX 2 XT modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive-System Capability:\u003c\/strong\u003e Supports DSP-based active two-way filtering and tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Connections:\u003c\/strong\u003e Includes 2-pin pigtail connectors for serviceable vehicle wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVX 6.5 II uses an aluminum chassis, semi-pressed paper woofer cone, rubber surround, ferrite woofer motor, and neodymium tweeter motor. Its 25.4 mm Tetolon fibre dome tweeter is mounted concentrically, and the woofer uses a 40 mm CCAW voice coil on a glass-fiber former. Overall dimension A is 165 mm, with a listed overall depth of 74.2 mm.\u003c\/p\u003e\u003cp\u003eFor passive operation, connect the woofer and tweeter sections through the included AVCX 2 XW and AVCX 2 XT crossover modules. For an active DSP installation, Audison recommends a 70 Hz high-pass filter for the woofer and a 3 kHz high-pass point for the tweeter, both using 24 dB\/octave Linkwitz-Riley filters. Check mounting depth, mounting diameter, wiring polarity, and amplifier capability before fitting the speakers.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242889798,"sku":"AVX6-5II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_wdvghMlL.jpg?v=1784363838"},{"product_id":"audison-b-con-ii-hi-res-bluetooth-receiver","title":"Audison B-CON II Hi-Res Bluetooth Receiver","description":"\u003cp\u003eThe Audison B-CON II is a compact high-resolution Bluetooth receiver designed to add wireless music streaming to a car audio system without replacing the factory radio. It receives audio from compatible phones and portable players, then feeds an aftermarket amplifier, DSP, or home audio component through RCA or optical S\/PDIF connections. It is intended for systems where source quality and flexible integration matter.\u003c\/p\u003e\u003cp\u003eBluetooth 5.0 + EDR connectivity supports LDAC, AAC, and SBC codecs for compatibility with Android and Apple devices. With an Android source that supports LDAC, the B-CON II can receive wireless audio up to 24-bit\/96 kHz. Its Hi-Res Audio Wireless certification from the Japan Audio Society identifies it as a purpose-built high-resolution wireless receiver.\u003c\/p\u003e\u003cp\u003eThe B-CON II provides stereo RCA analog outputs rated at 2 Vrms, along with an optical digital output for connection to compatible processors and amplifiers. Its analog output section is specified for a 5 Hz to 48 kHz bandwidth, 0.003% THD at 1 kHz and 1 Vrms, and a 107 dB(A) signal-to-noise ratio. This gives installers a choice between direct analog connection and a digital signal path.\u003c\/p\u003e\u003cp\u003eAn optical S\/PDIF input adds another source option for systems using an external digital player or interface. The input accepts PCM signals up to 24-bit\/192 kHz and passes the signal directly to the optical output without D\/A or A\/D conversion when Bluetooth streaming is inactive. RCA output is disabled while the unit is operating in optical pass-through mode.\u003c\/p\u003e\u003cp\u003eFor compatible Audison AF bit amplifiers and bit One HD Virtuoso processors, the ADC port supports Absolute Volume operation and enhanced B-CON Go App control. The system can use the phone as a master-volume controller while retaining the digital stream's available resolution. The B-CON II can also coordinate source switching around factory hands-free calling when installed and configured with compatible equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Wireless Certification:\u003c\/strong\u003e Japan Audio Society certification supports high-resolution wireless audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLDAC, AAC, and SBC:\u003c\/strong\u003e Supports common Bluetooth codecs for Android and Apple devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/96 kHz LDAC Streaming:\u003c\/strong\u003e Receives high-resolution LDAC audio from compatible Android sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA and Optical Outputs:\u003c\/strong\u003e Connects to analog inputs or compatible S\/PDIF digital inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical Pass-Through Input:\u003c\/strong\u003e Routes compatible digital PCM sources without conversion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbsolute Volume Support:\u003c\/strong\u003e Works with select Audison DSP products through the ADC port.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe B-CON II uses a compact 90 x 60.4 x 23 mm enclosure with integrated mounting tabs and status LEDs for Bluetooth pairing and stream-resolution indication. Its connection layout includes RCA outputs, optical S\/PDIF input and output, an ADC port, and a supply\/remote harness. The package includes mounting screws, an ADC-to-ADC cable, and a multipolar power\/remote cable.\u003c\/p\u003e\u003cp\u003eInstall the B-CON II near the DSP, amplifier, or other destination component and use either its RCA outputs or Toslink optical output as appropriate for the system. In a vehicle, it can be powered through the supplied harness from a 5 to 24 VDC source; for home or bench use, it can be powered from 5V USB-C with a supply rated for at least 500 mA. Absolute Volume requires an ADC connection to a compatible Audison AF bit amplifier or bit One HD Virtuoso processor.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614243643462,"sku":"B-CON II","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TZjg26rGL.jpg?v=1784363880"},{"product_id":"audison-bit-one-hd-virtuoso-13-channel-dsp","title":"Audison BIT ONE HD Virtuoso 13-Channel DSP","description":"\u003cp\u003eThe Audison BIT ONE HD Virtuoso is a car-audio digital signal processor designed to integrate, route, and tune complex OEM or aftermarket audio systems. It accepts high-level, low-level, auxiliary, and optical digital sources, then provides configurable analog and digital outputs for external amplifiers. It is intended for systems that need more control than a factory radio or amplifier can provide on its own.\u003c\/p\u003e\u003cp\u003eWith 24-bit\/96 kHz internal floating-point processing, the processor supports detailed adjustment of signal routing, equalization, crossover points, phase, and time alignment. Its 13-channel architecture gives installers flexibility for active front stages, rear channels, center channels, and subwoofer applications. The analog preamp outputs provide up to 4 V RMS for connection to compatible amplifiers.\u003c\/p\u003e\u003cp\u003eThe BIT ONE HD Virtuoso is especially suited to retaining a factory head unit while correcting its signal behavior and adapting it to a higher-performance amplified system. Twelve speaker-level inputs support multichannel OEM systems, while six master pre-input channels and a stereo AUX input accommodate aftermarket or auxiliary analog sources. Two optical S\/PDIF inputs accept PCM audio up to 192 kHz\/24-bit.\u003c\/p\u003e\u003cp\u003eIts tuning platform includes automatic de-equalization, delay compensation, all-pass compensation, polarity checking, selectable IIR or FIR operating modes, and comprehensive crossover controls. Per-channel equalization and time alignment help an installer account for speaker placement and vehicle acoustics. Dynamic equalization and adjustable bass boost are also available through the processor setup.\u003c\/p\u003e\u003cp\u003eFor Audison digital-system builds, the BIT ONE HD Virtuoso can feed compatible amplifiers through AD Link digital outputs and manage them through AC Link connections. It can also operate conventionally through its RCA pre-outs, making it appropriate for mixed analog and digital amplifier systems. The included DRC MP controller adds convenient in-vehicle access to supported volume, source, and system functions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e13-Channel Processing:\u003c\/strong\u003e Supports detailed routing and tuning for complex multi-amplifier car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24-Bit\/96 kHz DSP:\u003c\/strong\u003e Provides high-resolution internal floating-point signal processing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM Integration Inputs:\u003c\/strong\u003e Twelve high-level inputs accommodate amplified factory audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical S\/PDIF Inputs:\u003c\/strong\u003e Two TOSLINK inputs accept PCM signals up to 192 kHz\/24-bit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIIR And FIR Modes:\u003c\/strong\u003e Lets the installer select the processing approach that suits the system design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAD Link And AC Link:\u003c\/strong\u003e Supports digital audio and control integration with compatible Audison amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BIT ONE HD Virtuoso uses a compact, processor-focused chassis with dedicated connections for power, remote control, analog inputs, optical inputs, RCA outputs, AD Link, AC Link, and PC setup. Its layout is designed around professional system integration rather than front-panel entertainment controls. The supplied DRC MP remote controller can be installed for accessible in-cabin operation.\u003c\/p\u003e\u003cp\u003eInstallation requires a 12 V vehicle electrical connection, proper grounding, a 2 A fuse, and configuration through a compatible Windows PC. High-level and pre-level master inputs are alternative connection methods, while the output scheme should be planned so the combined analog and AD Link channel assignment does not exceed 13 channels. Professional installation and calibration are recommended for factory-system integration, active crossovers, and digital-link amplifier setups.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614246068294,"sku":"BIT ONE HD","price":1999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61hHW1gnmdL.jpg?v=1784363934"},{"product_id":"audison-bitten-bit-ten-5-channel-signal-interface-processor","title":"Audison BITTEN bit Ten 5-Channel Signal Interface Processor","description":"\u003cp\u003eThe Audison BITTEN bit Ten is a digital signal interface processor for integrating, correcting, and tuning a car audio system. It accepts amplified speaker-level signals from a factory or aftermarket source, then supplies five independently processed RCA preamp outputs for external amplifiers. It is designed for systems that need more control than a head unit’s basic tone controls can provide.\u003c\/p\u003e\u003cp\u003eThis processor is well suited to upgrading a factory system while retaining the original radio and vehicle functions. Its high-level inputs support front and rear source channels, while the stereo AUX input provides a connection point for an additional analog source. A dedicated phone input and mute function support compatible hands-free phone-kit integration.\u003c\/p\u003e\u003cp\u003eThe bit Ten gives installers control of crossover points, output equalization, level, phase, and time alignment on each output channel. Five 31-band graphic equalizers allow channel-by-channel response adjustment, while the digital delay functions help align speaker arrival times at the listening position. The result is a configurable signal foundation for front\/rear\/subwoofer or active multi-amplifier layouts.\u003c\/p\u003e\u003cp\u003eIts signal processing combines a 32-bit DSP platform with 24-bit A\/D and D\/A conversion and 24-bit\/48 kHz fixed-point processing. Automatic de-equalization on the speaker-level inputs can address preset equalization found in many OEM audio systems. The processor also supports Linkwitz and Butterworth crossover alignments across a broad selectable frequency range.\u003c\/p\u003e\u003cp\u003eThe five RCA outputs are assigned by software and default to front left\/right, rear left\/right, and subwoofer. This makes the bit Ten a practical interface between the source unit and separate amplifiers, including systems with an active front stage and subwoofer. PC connection through USB Type-B is used for setup and tuning, while the optional DRC remote interface can provide everyday control functions.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive Processed Outputs:\u003c\/strong\u003e Provides independent RCA preamp channels for amplified system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour High-Level Inputs:\u003c\/strong\u003e Connects to amplified factory or aftermarket speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e31-Band Output EQ:\u003c\/strong\u003e Enables detailed tonal adjustment on every output channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Crossover Network:\u003c\/strong\u003e Configures full-range, high-pass, low-pass, or band-pass operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic De-Equalization:\u003c\/strong\u003e Helps correct preset equalization from compatible OEM sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime Alignment:\u003c\/strong\u003e Applies per-channel delay for more coherent speaker timing.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe bit Ten uses a compact processor chassis measuring 7.51 inches wide, 1.33 inches high, and 4.76 inches deep, with a listed weight of 1.322 pounds. Its connection layout combines a multipolar harness for power, high-level inputs, remote functions, and controls with RCA output connections and a USB Type-B setup port. The design is intended to fit discreetly in a protected vehicle installation location.\u003c\/p\u003e\u003cp\u003eInstallation requires 11 to 15 VDC vehicle power, ground, source connections, and RCA cables to downstream amplifiers. Use the supplied or compatible PC software to assign outputs, set input sensitivity, apply crossover and equalizer settings, and configure delay; the manufacturer recommends 16 AWG power cable and an external delayed 1 A fuse. For factory-radio integration, connect the four speaker-level master inputs and calibrate the system before final amplifier gain adjustment.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614248132678,"sku":"BITTEN","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71LaBHNxFsL.jpg?v=1784363982"}],"url":"https:\/\/audiowatt.store\/collections\/audison.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}