{"title":"6x9 Inch Speakers","description":null,"products":[{"product_id":"audio360-ad6915p-6x9-4-way-coaxial-car-speakers","title":"AUDIO360 AD6915P 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe AUDIO360 AD6915P is a 6x9-inch 4-way coaxial car speaker designed for factory-location upgrades in vehicles with compatible 6x9 mounting positions. It provides an all-in-one speaker configuration for replacing worn or underperforming door or rear-deck speakers. Its 4-ohm design supports use with many aftermarket head units and amplifiers.\u003c\/p\u003e\u003cp\u003eThis model is intended for drivers who want fuller output and stronger midbass from a factory-sized speaker location. The stated 92 dB sensitivity helps it produce substantial output from available amplifier power. It is suited to everyday listening systems as well as custom car-audio installations using 6x9 speaker locations.\u003c\/p\u003e\u003cp\u003eThe AD6915P is rated at 1000 watts maximum power and 500 watts RMS. Proper power matching remains important, so amplifier output and gain settings should be selected carefully for the speaker system. A compatible amplifier can help provide controlled output when higher volume is desired.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber surround form the speaker's primary moving assembly. This construction is intended to support cone control and durability during regular vehicle use. The coaxial layout places multiple drivers within the 6x9 speaker format for broad sound coverage from a single mounting location.\u003c\/p\u003e\u003cp\u003eWith a 3.54-inch mounting depth and an 8.58 x 5.87-inch cutout requirement, the AD6915P should be measured against the vehicle's available space before purchase. It can be used in compatible doors, rear decks, or custom panels. Vehicle-specific mounting adapters, wiring harnesses, or hardware may be needed depending on the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible factory-size speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Combines multiple drivers within one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Power:\u003c\/strong\u003e Provides stated high-output power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket radios and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6915P uses an injection-molded cone with a rubber surround. These materials are specified to support cone control and long-term durability. Its 4-way coaxial construction consolidates the speaker elements into a single 6x9-inch assembly.\u003c\/p\u003e\u003cp\u003eConfirm both the 3.54-inch mounting depth and 8.58 x 5.87-inch cutout dimensions against the intended location before installation. Use vehicle-appropriate brackets, wiring adapters, and mounting hardware where required; their inclusion is not confirmed. For amplified systems, match the amplifier configuration to the 4-ohm speaker load and set gains conservatively.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614093959238,"sku":"AD6915P","price":33.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81C2zDpDq9L.jpg?v=1784358325"},{"product_id":"audison-apk690-6x9-2-way-component-speaker-system","title":"Audison APK690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK690 is a Prima Series 2-way component speaker system designed for vehicles with factory 6 x 9-inch door speaker locations. It combines AP 690 elliptical woofers, AP 1 tweeters, and dedicated APCX TW 690 passive crossovers. This configuration provides a practical upgrade path for vehicles that need separate high-frequency placement rather than a coaxial speaker.\u003c\/p\u003e\u003cp\u003eRated for 100 watts continuous and 300 watts peak power handling, the APK690 presents a 4-ohm load to the audio system. Its specified system frequency response is 40 Hz to 20 kHz, covering bass and midrange output from the wofer section along with high-frequency extension from the separate tweeters. The woofer sensitivity is rated at 95 dB SPL.\u003c\/p\u003e\u003cp\u003eThe AP 690 woofer uses a 25 mm pure-copper voice coil and a water-repellent treated paper cone. Its cone profile was developed with FEM simulation and optimized with Klippel R\u0026amp;D Scan Vibrometer measurements. A Triple Wave surround is used to support linear cone excursion, while the compact basket is intended to help with OEM-style door installations.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter has a 26 mm diaphragm with a wide-roll surround and an acoustic lens. Audison specifies the lens to help compensate for in-car response effects in the 10 kHz to 13 kHz range associated with challenging OEM mounting locations. The separate tweeter arrangement gives installers flexibility to retain or improve factory high-frequency speaker positions.\u003c\/p\u003e\u003cp\u003eEach system uses an APCX TW 690 crossover, which applies a 6 dB-per-octave high-pass filter at 3.3 kHz for the tweeter. The compact crossover includes a 0 dB or +3 dB tweeter-level setting for adjustment after installation. The APK690 can be used as part of a factory-radio upgrade or paired with a compatible 4-ohm aftermarket amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible vehicle-specific placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports systems rated up to 100 watts continuous power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e APCX TW 690 networks manage tweeter filtering and level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Choose 0 dB or +3 dB tweeter attenuation settings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Treated woofer cone is designed for door-speaker environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Woofer Coil:\u003c\/strong\u003e 25 mm voice coil supports power handling and cone control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 690 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its 90 x 32 x 15 mm woofer magnet and 25 mm voice coil are paired with a treated paper cone and Triple Wave surround. The AP 1 tweeter uses a 26 mm diaphragm, while the compact APCX TW 690 crossover measures 46.5 x 37.5 x 20.1 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6 x 9-inch elliptical woofer and has adequate mounting clearance before purchase. Install the AP 1 tweeters and AP 690 woofers through the supplied APCX TW 690 crossovers; the crossover's fast-on connectors are intended to simplify correct connections. Match the system to a compatible 4-ohm amplifier or speaker channel, and use the 0 dB or +3 dB tweeter setting to suit the final mounting location.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614227554374,"sku":"APK690","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-VOSfKKVL.jpg?v=1784362949"},{"product_id":"cerwin-vega-cvp69-6x9-4-ohm-full-range-speaker","title":"Cerwin-Vega CVP69 6x9\" 4-Ohm Full-Range Speaker","description":"\u003cp\u003eThe Cerwin-Vega CVP69 is a single 6x9-inch PRO Series full-range car speaker designed for vehicle audio systems that need higher output capability than typical factory speakers. Its 4-ohm impedance makes it suitable for common car-audio amplifier channels and compatible system designs. It is intended for custom installations in cars, trucks, SUVs, vans, motorcycles, and other vehicle-based audio applications.\u003c\/p\u003e\u003cp\u003eWith a 150-watt RMS and 300-watt maximum power rating, the CVP69 is built for systems that prioritize strong output and controlled midrange presence. Its 94 dB sensitivity rating helps it produce substantial output from available amplifier power. The published 50 Hz to 20 kHz frequency-response range supports broad-band reproduction from a single pro-style driver.\u003c\/p\u003e\u003cp\u003eThe CVP69 uses a treated paper cone and treated cloth surround to provide a durable moving assembly for high-output use. A 1.5-inch high-temperature, single-layer voice coil supports its stated power handling. Its ferrite motor uses a high-density, high B\/L design intended to maintain driver control under demanding playback conditions.\u003c\/p\u003e\u003cp\u003eA heavy-duty stamped-steel basket provides a rigid mounting platform for the speaker assembly. The driver has a 20-ounce ferrite magnet structure and a 4.53-inch magnet diameter. This construction makes it a practical choice for installations where a pro-driver format and physical durability are priorities.\u003c\/p\u003e\u003cp\u003eThe CVP69 is sold individually, allowing installers to build a matched pair or larger multi-speaker layout as needed. It can be used as part of a high-output system with compatible amplification and optional dedicated tweeters or subwoofers. Verify the vehicle's mounting opening, mounting depth, wiring, and available power before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplifier-powered systems designed around substantial continuous output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch PRO Driver:\u003c\/strong\u003e Fits applications designed for an oval 6x9-inch speaker format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many conventional car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Helps produce strong output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Provides a lightweight cone material for responsive sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a durable structural base for secure mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP69 combines a treated paper cone, treated cloth surround, ferrite magnet, high-temperature voice coil, and stamped-steel basket. Its pro-driver construction is focused on output capability and mechanical durability. The speaker uses a single 4-ohm voice coil and does not include a grille.\u003c\/p\u003e\u003cp\u003eAllow for an 8.74 x 5.98-inch mounting cutout and 3.07 inches of mounting depth behind the mounting surface. Confirm that the vehicle panel has sufficient clearance for the 9.29 x 6.46-inch overall frame and 3.17-inch total depth. For best results, use secure mounting hardware, correct-polarity speaker wiring, and an amplifier channel matched appropriately to the speaker's 4-ohm load and 150-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614314848326,"sku":"CER-CVP69","price":56.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61uyNrKUwIL.jpg?v=1784366022"},{"product_id":"cerwin-vega-h693-6x9-inch-3-way-coaxial-speakers","title":"Cerwin-Vega H693 6x9-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H693 is a pair of 6x9-inch, 3-way coaxial car speakers for replacing factory door, rear-deck, or hatch-area speakers where this size is supported. Each speaker combines its woofer, midrange, and tweeter in a single assembly to simplify a full-range upgrade. It is designed for vehicle audio systems using 4-ohm speakers.\u003c\/p\u003e\u003cp\u003eThis speaker set is suited to listeners who want a more complete frequency presentation from a conventional 6x9-inch location without installing separate component drivers. The 6x9-inch woofer handles the main bass and midrange range, while the dedicated 2.5-inch midrange and 1-inch tweeter support higher-frequency detail. Its published response range is 90 Hz to 20 kHz.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and UV-treated foam surround form the primary moving assembly. This combination is intended to provide controlled cone movement while supporting long-term use in an automotive environment. The woofer uses a ferrite magnet motor structure.\u003c\/p\u003e\u003cp\u003eThe H693 uses a dynamically balanced 1-inch PEI tweeter to reproduce treble information. An integrated crossover directs frequencies among the speaker elements, and built-in tweeter protection is included. Together, these features keep the installation self-contained rather than requiring a separate external crossover.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 150 watts maximum power handling, the H693 can be used with a compatible factory radio or a properly configured external amplifier. It is sold as a pair for left\/right stereo installation. Verify vehicle fitment, mounting clearance, and wiring connections before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Woofer:\u003c\/strong\u003e Fits applications designed for the common oval speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Midrange:\u003c\/strong\u003e Adds dedicated coverage for vocal and instrument frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Reproduces upper-frequency detail within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer’s primary sound-producing surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies internally and includes tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H693 uses a responsive polypropylene cone, UV-treated foam surround, ferrite woofer magnet, and powder-coated rigid stamped-steel basket. The coaxial driver assembly places the 2.5-inch midrange and 1-inch PEI tweeter within the 6x9-inch speaker format. This construction is intended for an all-in-one full-range car-speaker installation.\u003c\/p\u003e\u003cp\u003eCheck that the intended location accepts a 6x9-inch speaker and confirm the published 90 mm (3.54-inch) mounting-depth requirement before purchase. The manufacturer lists overall and cutout dimensions of 236 x 162.5 mm (9.29 x 6.40 inches), so vehicle-specific adapters, brackets, harnesses, or hardware may be needed depending on the application. Connect each speaker with correct polarity and use an amplifier or radio that supports a 4-ohm load.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614392213574,"sku":"CER-H693","price":101.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61pJ5e0rw7L.jpg?v=1784367487"},{"product_id":"cerwin-vega-h7693-6x9-3-way-coaxial-speakers","title":"Cerwin-Vega H7693 6x9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7693 is a pair of 6x9-inch HED Series 3-way coaxial car speakers designed to replace factory speakers in compatible vehicle locations. They provide a full-range upgrade in a single speaker assembly, helping simplify installations where separate component speakers are not required. The pair is suited to rear decks, doors, and custom panels when the vehicle has adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eIts 3-way coaxial layout combines woofer, midrange, and high-frequency drivers in each speaker. This arrangement is intended to cover bass, vocal, and treble ranges from one mounting location. With a 50 Hz to 20 kHz frequency-response rating, the H7693 is designed for broad everyday music playback.\u003c\/p\u003e\u003cp\u003eThe H7693 is rated for 70 watts RMS and 420 watts maximum power handling per speaker. Its 4-ohm single-voice-coil design is compatible with many factory and aftermarket car-audio systems. An amplifier should be selected and configured with its continuous RMS output and impedance compatibility in mind.\u003c\/p\u003e\u003cp\u003eConstruction includes a polypropylene cone, treated-foam surround, ferrite magnet, and stamped-steel basket. Cerwin-Vega specifies a Mylar diaphragm and a PEI black polypropylene dome tweeter for high-frequency reproduction. An internal crossover is included to divide the signal among the coaxial drivers.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the H7693 can be used as a direct full-range speaker replacement or paired with an appropriately matched aftermarket amplifier. Its 86.5 dB sensitivity rating and 4-ohm impedance should be considered when planning output levels and amplifier power. Verify vehicle-specific fitment, mounting-hole dimensions, and panel clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Format:\u003c\/strong\u003e Fits compatible rear-deck, door, and custom-panel locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and high-frequency drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Rating:\u003c\/strong\u003e Supports appropriately matched continuous amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Divides frequencies within each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable woofer cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Supports stable mounting and speaker structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7693 uses a stamped-steel basket with a ferrite ceramic magnet, polypropylene cone, treated-foam surround, and single 1-inch voice coil. Its coaxial architecture keeps the drivers together in one assembly, while the internal crossover is built into the speaker. Cerwin-Vega specifies a 3-way configuration with a Mylar diaphragm and PEI black polypropylene dome tweeter.\u003c\/p\u003e\u003cp\u003eConfirm that the intended location accepts a 6x9-inch speaker and accommodates the 3.3-inch mounting depth before purchase. The specified mounting opening is 7.71 x 6.4 inches, so vehicle-specific brackets, adapters, or wiring connections may be needed depending on the application. Use correct polarity and match the speakers with a compatible 4-ohm factory radio or amplifier.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615613182022,"sku":"CER-H7693","price":96.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ep53CRjtL.jpg?v=1784368238"},{"product_id":"cerwin-vega-h7694-6x9-4-way-coaxial-car-speakers","title":"Cerwin-Vega H7694 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7694 is a pair of 6x9-inch HED Series 4-way coaxial car speakers designed as a full-range replacement for factory-installed speakers. They provide an all-in-one speaker solution for vehicles with compatible 6x9 mounting locations. The coaxial layout places multiple drivers in each speaker assembly, helping simplify an audio upgrade without separate external tweeter mounting.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want stronger, more detailed sound from a factory or aftermarket stereo system. With 75 watts RMS power handling per speaker and a 4-ohm nominal impedance, the H7694 can be used with compatible head-unit power or an appropriately matched external amplifier. Their 86.5 dB sensitivity specification and 50 Hz to 20 kHz frequency response support broad full-range reproduction.\u003c\/p\u003e\u003cp\u003eThe H7694 uses a 4-way coaxial design to combine low-, mid-, and high-frequency output from a compact 6x9-inch footprint. A 1-inch balanced-dome PEI tweeter is incorporated into the speaker assembly for high-frequency reproduction. This makes the pair a practical choice for rear-deck, door, or custom-panel speaker locations that accept the required dimensions.\u003c\/p\u003e\u003cp\u003eIts construction combines a polypropylene cone, treated-foam surround, Mylar diaphragm, ferrite magnet structure, and stamped-steel basket. The stamped-steel frame provides a rigid mounting foundation, while the internal crossover is built into the speaker design. These materials are selected for conventional automotive speaker installation and daily music playback.\u003c\/p\u003e\u003cp\u003eThe H7694 can serve as a direct speaker upgrade in a stock system or as part of a larger car-audio build with an aftermarket amplifier. Verify the vehicle's available mounting depth, cutout dimensions, mounting-hole layout, and window or trunk clearance before installation. For amplified systems, match amplifier output conservatively to the speaker's 75-watt RMS rating per speaker rather than selecting equipment solely by maximum-power figures.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Coaxial Design:\u003c\/strong\u003e Integrates multiple driver elements into each 6x9-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Supports amplifier matching at 75 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many conventional car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a durable cone material for automotive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Creates a solid structure for mounting the speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Built-in crossover supports the coaxial driver arrangement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7694 uses a stamped-steel basket, ferrite ceramic magnet, polypropylene cone, treated-foam surround, and Mylar diaphragm. Its 1-inch voice coil and single-voice-coil configuration are paired with a 1-inch PEI balanced-dome tweeter. Speaker grilles are included with the pair.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle can accept a 6x9-inch speaker, the 7.71 x 6.4-inch mounting cutout, and approximately 3.3 inches of mounting depth before purchase. Mount the speakers securely on a flat surface and seal the frame area to reduce air leaks; when wiring through metal, use suitable protection such as grommets. Maintain correct positive and negative polarity at both speakers, and check clearance for windows, trunk hardware, and interior panels before final assembly.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615631532102,"sku":"CER-H7694","price":107.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51dFOXKUIHL.jpg?v=1784368303"},{"product_id":"cerwin-vega-sm69f4-6x9-marine-2-way-coaxial-speakers","title":"Cerwin-Vega SM69F4 6x9\" Marine 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM69F4 is a pair of 6 x 9-inch, 2-way coaxial speakers made for marine, motorcycle, and powersports audio installations. It provides a flush-mount speaker option for systems exposed to sun, moisture, wind, and open-air riding noise. The 4-ohm design is suited to compatible aftermarket amplifiers and speaker outputs.\u003c\/p\u003e\u003cp\u003eEach system combines a 6 x 9-inch woofer section with a 25 mm titanium dome tweeter. This configuration is designed to cover midrange and high-frequency information from one mounting location. Its specified frequency response is 60 Hz to 18 kHz.\u003c\/p\u003e\u003cp\u003eThe SM69F4 is rated for 150 watts RMS and 300 watts peak power handling. A 93 dB sensitivity rating at 1W\/1m supports useful output from an appropriately matched amplifier. The extended-excursion design lists 4 mm of Xmax.\u003c\/p\u003e\u003cp\u003eFor outdoor durability, Cerwin-Vega specifies an IP65 marine-grade-compliant design with 100% UV-stable materials. The speaker uses a thermal-molded, UV-coated waterproof composite injection cone and a high-temperature injection-molded composite basket. These construction details are intended for marine and powersports environments rather than conventional protected cabin installations.\u003c\/p\u003e\u003cp\u003eIntegrated digital RGB LED lighting lets the speakers become part of a coordinated illuminated audio system. Cerwin-Vega identifies the optional RPMDLED multi-function digital RGB LED lighting remote control for lighting control. With its 8.64 x 6.0-inch cutout requirement and 3.15-inch mounting depth, the SM69F4 is suited to custom panels, boat surfaces, fairings, and compatible lid installations with sufficient clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter sections in one flush-mount speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 mm Titanium Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the 2-way system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched to the speaker's continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine-Grade Compliance:\u003c\/strong\u003e Supports use in marine and exposed powersports installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Composite Cone:\u003c\/strong\u003e Uses UV-coated composite construction for outdoor durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Digital RGB LEDs:\u003c\/strong\u003e Adds selectable lighting capability with the available RPMDLED controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM69F4 uses a thermal-molded, UV-coated waterproof composite injection cone, a titanium dome tweeter, and a high-temperature injection-molded composite basket. Its Radial Zip Ring cone design is specified for expanded high-frequency reproduction, while the Max Xmax suspension design is intended for marine and motorcycle-fairing applications. The speakers are supplied as a pair and use a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eConfirm a mounting opening of 8.64 x 6.0 inches and allow at least 3.15 inches of mounting depth before installation. Use a stable mounting surface and wire each speaker to an amplifier or source compatible with a 4-ohm load and the stated power rating. Plan RGB lighting wiring separately if lighting control is desired; Cerwin-Vega lists the RPMDLED controller as available, and grilles are listed as an option.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45616871604294,"sku":"CER-SM69F4","price":4517.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Y9qKTC--L.jpg?v=1784368929"},{"product_id":"cerwin-vega-st69cx-6x9-2-way-coaxial-speakers","title":"Cerwin Vega ST69CX 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin Vega ST69CX is a pair of 6x9-inch, 2-way coaxial speakers built for high-output vehicle, marine, and motorsport audio applications. It combines a full-range woofer and centrally mounted titanium dome tweeter in each speaker, simplifying upgrades where space is limited. The 4-ohm design suits systems designed for standard aftermarket speaker loads.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want stronger low-frequency presence and clear upper-frequency detail from a 6x9-inch location. Their 45 Hz to 23 kHz frequency response supports bass, midrange, and treble reproduction from a single coaxial assembly. With 125 watts RMS handling per speaker, they are appropriate for amplifier-powered systems that are correctly matched for power and impedance.\u003c\/p\u003e\u003cp\u003eA UV-treated, thermal-molded waterproof Kevlar fiber cone and rubber surround support use in exposed environments. The speaker system is described as IPX65 marine-grade compliant and salt-resistant, making it suitable for installations where moisture, sun, and changing weather are considerations. These materials also provide a durable foundation for daily on-road and off-road use.\u003c\/p\u003e\u003cp\u003eEach ST69CX uses a 1-inch titanium dome tweeter to reproduce high frequencies, while the woofer uses a 1.4-inch high-temperature voice coil for power handling. A 12 dB Bessel crossover network divides the signal between the woofer and tweeter. The high-energy ferrite motor system, milled aluminum top plate, and vented T-yoke back plate are designed to support heat management during higher-output listening.\u003c\/p\u003e\u003cp\u003eThe ST69CX works well as a replacement or upgrade for compatible 6x9-inch speaker locations with sufficient mounting clearance. It can be used with a compatible factory radio, though an external amplifier matched to its 125-watt RMS-per-speaker rating can provide greater output capability. Verify the 8.875 x 6.125-inch cutout requirement and 3.875-inch mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter performance in each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Per Speaker:\u003c\/strong\u003e Supports amplifier-powered systems with properly matched output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Titanium Dome Tweeter:\u003c\/strong\u003e Reproduces detailed high-frequency information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKevlar Fiber Cone:\u003c\/strong\u003e Uses a UV-treated, waterproof cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction:\u003c\/strong\u003e IPX65-compliant design supports exposed-use installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 dB Bessel Crossover:\u003c\/strong\u003e Directs appropriate frequencies to each driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ST69CX uses a high-temperature cast aluminum basket, rubber surround, ferrite motor system, milled aluminum top plate, and T-yoke back plate. Its woofer cone is made from UV-treated thermal-molded waterproof Kevlar fiber, while the integrated tweeter uses a titanium dome. Removable black trim rings or grilles are included.\u003c\/p\u003e\u003cp\u003eUse the speakers only where the mounting opening measures approximately 8.875 x 6.125 inches and where at least 3.875 inches of mounting depth is available. The package includes a pair of speakers plus stainless mounting screws and machine bolts with nuts and washers. Match the amplifier or head-unit speaker output to the speakers' 4-ohm nominal impedance, and avoid exceeding their rated power handling.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45616946085958,"sku":"CER-ST69CX","price":410.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61PR523ck1L.jpg?v=1784369009"},{"product_id":"cerwin-vega-v69-6-x-9-inch-2-way-coaxial-speakers","title":"Cerwin-Vega V69 6 x 9-Inch 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega V69 is a pair of 6 x 9-inch, 2-way coaxial full-range car speakers for replacing or upgrading compatible factory speaker locations. Each set combines a woofer and centrally mounted tweeter in one assembly, helping simplify a vehicle speaker upgrade. With a 4-ohm nominal impedance, these speakers are intended for standard car-audio speaker connections.\u003c\/p\u003e\u003cp\u003eThe V69 is suited to listeners who want a larger oval speaker format with dedicated high-frequency reproduction built into the speaker. Its 140-watt RMS and 420-watt maximum power-handling ratings provide useful information for matching an amplifier or receiver. The published 90 Hz to 20 kHz frequency response covers bass, midrange, and treble duties within a full-range speaker system.\u003c\/p\u003e\u003cp\u003eA hybrid carbon fiber\/polypropylene cone forms the woofer diaphragm, while a Santoprene rubber surround supports cone movement. This material combination is paired with a strontium ferrite woofer magnet. The result is a purpose-built coaxial design for everyday vehicle listening and speaker-system upgrades.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced silk dome tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter. The crossover also incorporates tweeter protection as part of the speaker assembly.\u003c\/p\u003e\u003cp\u003eThe V69 can be used as a replacement pair where vehicle mounting space and opening dimensions are compatible. Its 3.20-inch mounting depth and 8.68 x 5.93-inch cutout requirement should be checked before purchase. Mesh steel grilles and speaker fitment adapters are included to support installation options.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Power Handling:\u003c\/strong\u003e Supports power matching with compatible car-audio amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon Fiber\/Polypropylene Cone:\u003c\/strong\u003e Forms the woofer diaphragm for sound reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Handles high-frequency output within the 2-way design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Protection:\u003c\/strong\u003e Helps protect the tweeter through the built-in crossover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles And Adapters:\u003c\/strong\u003e Adds protection and fitment flexibility during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V69 uses a hybrid carbon fiber\/polypropylene cone, Santoprene rubber surround, silk dome tweeter, and rigid stamped steel basket. Its basket has a powder-coated finish, while the woofer uses a strontium ferrite magnet and the tweeter uses a neodymium magnet. Mesh steel grilles are included with the speaker pair.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location accepts a 6 x 9-inch speaker and allows the published 3.20-inch mounting depth before installation. The required cutout is 8.68 x 5.93 inches, and the overall speaker size is 9.29 x 6.40 inches. Connect the pair to a compatible 4-ohm car-audio source and observe correct speaker polarity during wiring.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45618278137926,"sku":"CER-V69","price":201.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71BsQSwTzVL.jpg?v=1784369819"},{"product_id":"cerwin-vega-v6925c-6x9-3-way-component-speaker-system","title":"Cerwin Vega V6925C 6x9\" 3-Way Component Speaker System","description":"\u003cp\u003eThe Cerwin Vega V6925C is a 6x9-inch, three-way component speaker system for upgrading factory vehicle audio with separately placed midrange and tweeter drivers. It combines a 6x9 woofer, 2.5-inch midrange, and 1-inch tweeter in each channel arrangement. This layout is suited to listeners who want more placement flexibility than a conventional coaxial speaker provides.\u003c\/p\u003e\u003cp\u003eThe system is designed for vehicles with suitable 6x9-inch mounting locations and space for the separate midrange and tweeter components. Cerwin Vega lists fitment support for GM, Ford, Chrysler, Jeep, Dodge, and select import vehicles, though vehicle-specific clearance should always be checked before installation. Speaker fitment adapters are included to assist with compatible applications.\u003c\/p\u003e\u003cp\u003eHybrid carbon fiber\/polypropylene cones are used for the woofer and midrange duties, while Santoprene rubber surrounds support driver movement. The result is intended to provide defined bass and midrange output while maintaining durability in an automotive environment. A rigid, powder-coated stamped-steel basket helps provide a stable mounting structure for the 6x9-inch woofer.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the V6925C uses dynamically balanced silk dome tweeters with neodymium magnets. The separate tweeter placement can help installers position high-frequency output closer to the listening area. Integrated passive crossovers divide the signal between the system's drivers and include tweeter protection.\u003c\/p\u003e\u003cp\u003eThis pair is a practical fit for a component-speaker upgrade paired with a compatible factory or aftermarket head unit and amplification. Its 4-ohm nominal impedance supports common car-audio system configurations. Mesh steel grilles are included for installations where the drivers need added physical protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Combines 6x9-inch woofers, 2.5-inch midranges, and 1-inch tweeters for separated frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Carbon fiber\/polypropylene cones support responsive woofer and midrange performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surrounds:\u003c\/strong\u003e Helps support cone excursion and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeters:\u003c\/strong\u003e Dynamically balanced tweeters are designed for smooth high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Passive Crossovers:\u003c\/strong\u003e Direct signal to the appropriate drivers and include tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Accessories:\u003c\/strong\u003e Mesh steel grilles and speaker fitment adapters are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V6925C uses hybrid carbon fiber\/polypropylene cones, Santoprene rubber surrounds, strontium ferrite woofer magnets, neodymium tweeter magnets, and powder-coated stamped-steel baskets. These materials are paired with separate silk dome tweeters and integrated crossovers to form the complete three-way system. The system is sold as a pair.\u003c\/p\u003e\u003cp\u003eConfirm the available 6x9-inch cutout, 3.20-inch mounting depth, and clearance behind the panel before installation. The separate tweeters can be flush or surface mounted; the manual specifies a 1.85-inch flush opening and at least 1 inch of rear clearance for flush mounting. Route each amplifier or speaker-output channel through its passive crossover, observe polarity, and mount crossovers in a protected, well-ventilated location.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45618409275462,"sku":"CER-V6925C","price":410.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ea-Abl-CL.jpg?v=1784369883"},{"product_id":"cerwin-vega-v693-6x9-inch-3-way-speakers","title":"Cerwin-Vega V693 6x9-Inch 3-Way Speakers","description":"\u003cp\u003eThe Cerwin-Vega V693 is a pair of 6 x 9-inch 3-way full-range car speakers designed for replacing factory speakers or building out a vehicle audio upgrade. Its triaxial layout combines a woofer, midrange driver, and tweeter in each speaker to cover bass, midrange, and high-frequency content from one mounting location. This makes it a practical option for vehicles with compatible 6 x 9-inch speaker openings.\u003c\/p\u003e\u003cp\u003eRated at 140 watts RMS and 420 watts maximum power handling, the V693 is suited to systems that need more output capability than many factory speakers provide. Its 4-ohm nominal impedance is common in aftermarket car-audio systems. The published 89 Hz to 20 kHz frequency response emphasizes midbass, vocals, and high-frequency detail rather than deep-subwoofer bass.\u003c\/p\u003e\u003cp\u003eA hybrid carbon-fiber\/polypropylene cone forms the main woofer diaphragm. Cerwin-Vega pairs it with a Santoprene rubber surround, a combination intended to support controlled cone movement and durability in an automotive environment. A strontium-ferrite woofer magnet supports the low-frequency driver assembly.\u003c\/p\u003e\u003cp\u003eThe V693 uses a dedicated midrange driver and a dynamically balanced silk-dome tweeter to extend upper-frequency coverage beyond the woofer. The tweeter uses a neodymium magnet, while the integrated crossover manages the transition between the speaker elements. Built-in tweeter protection is included to help protect the high-frequency driver during demanding playback.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the V693 can be used with a factory head unit or paired with an amplifier that is appropriate for 4-ohm speakers and their published power rating. The pair includes mesh steel grilles and speaker fitment adapters for installation flexibility. Confirm the vehicle opening, cutout area, mounting depth, and panel clearance before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Triaxial Design:\u003c\/strong\u003e Combines woofer, midrange, and tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Power Handling:\u003c\/strong\u003e Supports higher-output aftermarket system designs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Composite Cone:\u003c\/strong\u003e Uses carbon fiber and polypropylene for the woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surround:\u003c\/strong\u003e Supports cone excursion and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk-Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a neodymium magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Directs frequencies between drivers and protects the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V693 uses a powder-coated rigid stamped-steel basket, hybrid carbon-fiber\/polypropylene woofer cone, Santoprene rubber surround, strontium-ferrite woofer magnet, and dynamically balanced silk-dome tweeter. Its 3-way layout places the midrange driver and tweeter within the 6 x 9-inch speaker assembly. Mesh steel grilles are included for installations where the speakers are exposed.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle provides an 8.68 x 5.93-inch cutout area and at least 2.60 inches of mounting depth, while also allowing clearance for the speaker's overall 3.56-inch height. Speaker fitment adapters are included, but vehicle-specific mounting hardware or wiring adapters may still be needed depending on the application. For amplified systems, use channels designed to operate safely with a 4-ohm speaker load.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45618474844230,"sku":"CER-V693","price":209.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ZViNdvJ_L.jpg?v=1784369919"},{"product_id":"cerwin-vega-v69c-6-x-9-2-way-component-speakers","title":"Cerwin-Vega V69C 6\" x 9\" 2-Way Component Speakers","description":"\u003cp\u003eThe Cerwin-Vega V69C is a 6\" x 9\" two-way component speaker system for vehicle audio upgrades. It separates the woofers and tweeters so installers can place the high-frequency drivers independently from the larger speakers. This makes it suitable for replacing factory speakers where improved speaker placement and dedicated crossover networks are desired.\u003c\/p\u003e\u003cp\u003eThe system is rated at 160 watts RMS and 480 watts maximum power handling, with a 4-ohm nominal impedance. Its 91 Hz to 20 kHz frequency response and 90 dB sensitivity support use with compatible factory-powered or aftermarket audio systems. An external amplifier can be considered when its clean output is properly matched to the speaker system's rating.\u003c\/p\u003e\u003cp\u003eEach set uses 6\" x 9\" woofers with hybrid carbon fiber\/polypropylene cones and Santoprene rubber surrounds. The cone and surround combination is intended to provide controlled midbass response while accommodating speaker movement. A rigid stamped-steel basket and ferrite strontium motor structure support the woofer assembly.\u003c\/p\u003e\u003cp\u003eSeparate 1-inch silk balanced-dome tweeters reproduce the upper-frequency range. The included passive crossover networks divide the signal between the woofer and tweeter, and incorporate tweeter protection. Tweeter level adjustments allow an installer to tailor high-frequency output to the vehicle and mounting location.\u003c\/p\u003e\u003cp\u003eThe V69C is intended for listeners building a front-stage speaker upgrade or replacing a 6\" x 9\" factory location with a component system. Its separate tweeters can be flush- or surface-mounted in locations such as door panels, sail panels, dashboards, or rear decks where clearance permits. Speaker grilles, fitment adapters, and dedicated crossover networks are included to support installation planning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates the 6\" x 9\" woofers and 1-inch tweeters for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Carbon Fiber\/Polypropylene Cone:\u003c\/strong\u003e Provides a rigid woofer diaphragm for midbass and midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Rubber Surround:\u003c\/strong\u003e Supports woofer excursion while maintaining a durable edge suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Balanced-Dome Tweeters:\u003c\/strong\u003e Handles high frequencies with dedicated, separately mountable tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Networks:\u003c\/strong\u003e Directs frequencies to the appropriate drivers and includes tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V69C uses hybrid carbon fiber\/polypropylene woofer cones, Santoprene rubber surrounds, powder-coated stamped-steel baskets, and ferrite strontium woofer motors. The 1-inch tweeters use silk balanced domes. The component system includes two woofers, two tweeters, two crossover networks, grilles, and tweeter mounting hardware.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle provides an 8.68\" x 5.93\" cutout and at least 3.20 inches of mounting depth before installation. The tweeters support flush or surface mounting; flush mounting requires a 1.85-inch opening and at least 1 inch of rear clearance. Mount crossovers in a dry, ventilated location and connect the amplifier or head-unit speaker output to the crossover input before connecting the woofer and tweeter outputs.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45618589499462,"sku":"CER-V69C","price":315.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71qht-Vij0L.jpg?v=1784369970"},{"product_id":"crunch-cs693-6-x-9-3-way-coaxial-car-speakers","title":"Crunch CS693 6 x 9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Crunch CS693 is a pair of 6 x 9-inch, 3-way coaxial car speakers designed for replacing worn factory speakers or building a straightforward vehicle-audio upgrade. Their 4-ohm design suits many conventional car-audio speaker circuits, while the 6 x 9-inch format fits applications that use this common oval speaker size. Before purchasing, confirm the vehicle’s available cutout and mounting depth.\u003c\/p\u003e\u003cp\u003eWith 75 watts RMS and 400 watts peak power handling per speaker, the CS693 is intended for systems using a compatible factory radio or aftermarket amplification. The 3-way coaxial layout combines bass, midrange, and high-frequency elements in each speaker location. This makes it practical for listeners seeking fuller sound without adding separate tweeters and external crossover hardware.\u003c\/p\u003e\u003cp\u003eSilver alpha-cellulose poly cones provide the moving surface for midrange and bass reproduction, while UV-resistant rubber surrounds help support repeated cone movement and exposure to automotive conditions. A 1-inch Neo-Mylar soft-dome tweeter handles upper-frequency detail. The result is a speaker design focused on broad full-range playback from a compact, vehicle-ready package.\u003c\/p\u003e\u003cp\u003eCrunch uses a pure copper voice coil on a Kapton former, along with an over-coil cooling arrangement that exchanges air through the spider area. The speaker also uses an epoxy-infused natural-fiber spider to support cone travel. These construction details are intended to help the driver remain stable during regular music playback.\u003c\/p\u003e\u003cp\u003eAn anti-resonant stamped-steel basket provides the speaker’s mounting structure, and a textured ABS gasket helps create a consistent seal against the mounting surface. The integrated passive Butterworth crossover directs frequencies among the 3-way driver elements. CS693 speakers can be used as a direct-size replacement where mounting measurements and wiring connections are compatible.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines multiple driver elements in each 6 x 9-inch speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Handling:\u003c\/strong\u003e Supports appropriately matched factory or aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Tweeter:\u003c\/strong\u003e A 1-inch soft-dome tweeter handles high-frequency playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Cone:\u003c\/strong\u003e Lightweight cone material supports midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e UV- and moisture-resistant surround supports durable cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Rigid frame helps provide a stable mounting platform.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS693 uses silver alpha-cellulose poly cones, UV-resistant rubber surrounds, pure copper voice coils, Kapton voice-coil formers, and epoxy-infused natural-fiber spiders. Its ferrite magnet motor, anti-resonant stamped-steel basket, textured ABS gasket, and integrated passive crossover form the core of the speaker assembly. Protective grilles are included for installations where the speaker is exposed rather than mounted behind a vehicle panel.\u003c\/p\u003e\u003cp\u003eCheck the vehicle’s speaker opening, available depth, factory mounting pattern, and panel clearance before installation. The listed cutout is 8.64 x 5.98 inches, while chassis mounting depth is 3.35 inches; adapters or vehicle-specific harnesses may be needed depending on the application. Connect using suitable spade connectors or soldered connections, observe polarity, and use power appropriate for the 4-ohm, 75-watt RMS speaker rating.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45622643556422,"sku":"CS693","price":51.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71uN77AlU4L.jpg?v=1784372227"},{"product_id":"gravity-gr-6996h-6x9-4-way-coaxial-car-speakers","title":"Gravity GR-6996H 6x9\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity GR-6996H is a pair of 6x9-inch, 4-way coaxial car speakers intended to replace compatible factory door or rear-deck speakers. It provides a practical option for drivers whose original speakers have become worn, quiet, or distorted. The 4-ohm design is suited to typical automotive speaker circuits.\u003c\/p\u003e\u003cp\u003eThese speakers use a 4-way coaxial layout to combine multiple driver elements within each 6x9-inch assembly. Their published 30 Hz to 22 kHz frequency response is designed to cover bass, midrange, and high-frequency content from a single speaker location. A 92 dB sensitivity rating supports efficient output with compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eGravity lists peak power handling of 380 watts total for the pair, with 175 watts peak per speaker. Peak ratings describe short-duration handling rather than continuous power, so amplifier selection should be based on the amplifier's actual output and clean setup. RMS power handling is not published for this model.\u003c\/p\u003e\u003cp\u003eThe GR-6996H uses silver alpha cellulose cones with moisture-resistant rubber surrounds. A Neo Mylar soft-dome tweeter is integrated into the coaxial design for high-frequency reproduction. The speaker assembly also includes a 20-ounce magnet and 25 mm voice coil.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the GR-6996H can be used with a compatible 4-ohm factory head unit or aftermarket amplifier. Its spade terminals simplify speaker-wire connection, while the stamped-steel basket supports the driver structure. Confirm vehicle-specific 6x9-inch fitment, mounting depth, mounting-hole pattern, and clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Format:\u003c\/strong\u003e Fits applications designed for compatible 6x9-inch car speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Speaker Design:\u003c\/strong\u003e Combines multiple driver elements in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common nominal impedance used in car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from compatible source units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilver Alpha Cellulose Cone:\u003c\/strong\u003e Provides the primary cone material for the woofer section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 Hz–22 kHz Response:\u003c\/strong\u003e Published range covers low, midrange, and high frequencies.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-6996H combines silver alpha cellulose cones, moisture-resistant rubber surrounds, a Neo Mylar soft-dome tweeter, and an anti-resonant stamped-steel basket. Each speaker uses a 25 mm voice coil and 20-ounce magnet structure. These construction details are intended for automotive use where vibration and changing cabin conditions are common.\u003c\/p\u003e\u003cp\u003eUse the supplied speaker wire, screws, and spade-terminal connections as appropriate for the vehicle and installation. Verify that the vehicle accepts 6x9-inch speakers and check mounting depth, grille clearance, terminal clearance, and mounting-hole alignment before ordering or cutting. Match polarity at both speakers and avoid exceeding the speakers' published peak-power claims with a distorted or improperly adjusted signal.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627864776774,"sku":"GR-6996H","price":52.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81gln7yedNL.jpg?v=1784375677"},{"product_id":"gravity-sgr694-6x9-4-way-full-range-car-speakers","title":"Gravity SGR694 6x9\" 4-Way Full-Range Car Speakers","description":"\u003cp\u003eThe Gravity SGR694 is a pair of 6x9-inch, 4-way full-range car audio speakers designed as an upgrade for vehicles with compatible 6x9 speaker locations. They provide a replacement path for worn or limited factory speakers while retaining a conventional 4-ohm load. Their coaxial format combines multiple drivers into each speaker assembly.\u003c\/p\u003e\u003cp\u003eWith a stated frequency response of 110 Hz to 20 kHz and 94 dB sensitivity, the SGR694 is intended to reproduce a broad portion of the audible range with efficient output. The four-way arrangement is designed to distribute sound reproduction across its integrated driver elements. These speakers are suited to listeners seeking a straightforward full-range speaker upgrade.\u003c\/p\u003e\u003cp\u003eThe SGR694 is rated for up to 600 watts maximum power handling and uses a 4-ohm impedance. Match the speakers with an audio source or amplifier that is stable at 4 ohms, and set gain conservatively to avoid audible distortion. Actual output and bass performance will depend on the vehicle, speaker location, source unit, and installation quality.\u003c\/p\u003e\u003cp\u003eGravity specifies alpha solid rubber cone construction and moisture-resistant rubber surrounds for the speaker assemblies. An anti-resonant stamped steel basket supports the driver structure and is intended to help control unwanted vibration. Spade terminals provide a familiar connection method for car-audio wiring.\u003c\/p\u003e\u003cp\u003eEach package includes two SGR694 speakers, two wire harnesses, eight mounting screws, eight speed clips, and a warranty card. The included hardware can simplify a basic installation, but vehicle-specific adapters, mounting brackets, or wiring adapters may still be needed. Confirm mounting depth, opening dimensions, and connector fit before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Speaker Size:\u003c\/strong\u003e Fits vehicles with compatible 6x9-inch speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Full-Range Design:\u003c\/strong\u003e Integrates multiple driver elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with car audio equipment designed for 4-ohm speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e94 dB Sensitivity:\u003c\/strong\u003e Indicates efficient sound output from available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Cone and Surround:\u003c\/strong\u003e Uses alpha solid rubber cones and moisture-resistant surrounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR694 uses alpha solid rubber cones, moisture-resistant rubber surrounds, and anti-resonant stamped steel baskets. This construction combines a resilient cone and surround material with a steel frame that supports the speaker assembly. The speakers use spade terminals for their electrical connections.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle has a compatible 6x9-inch mounting location and at least 3-7\/8 inches of mounting depth before installation. Connect wiring with correct polarity, secure each speaker with the included screws and speed clips where appropriate, and test operation before reinstalling interior panels. The included wire harnesses may assist installation, though vehicle-specific fitment parts are not confirmed.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45631464472646,"sku":"SGR694","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81FVqo-Vf9L.jpg?v=1784377839"},{"product_id":"hertz-cpk-690-6x9-2-way-component-speaker-system","title":"Hertz CPK 690 6x9\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CPK 690 is a 6x9-inch, two-way component speaker system from the Cento PRO line. It is designed for vehicles with oval 6x9 speaker locations, including many door applications common in North American vehicles. By separating the woofer and tweeter, the system allows more flexible placement than a coaxial speaker design.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners upgrading factory door speakers who want stronger midbass output and more controlled high-frequency reproduction. Its 120-watt continuous power rating and 4-ohm nominal impedance make it suitable for use with a properly matched aftermarket amplifier. The stated frequency response extends from 35 Hz to 22.5 kHz.\u003c\/p\u003e\u003cp\u003eThe CP 690 woofer uses a water-repellent pressed-paper cone with FEM-optimized geometry. Hertz combines this cone with a 30.5 mm double-layer voice coil, high-density-flux ferrite motor, low-carbon polar plates, and a three-spoke basket with a rubber magnet cover. These elements are designed to support controlled operation and power handling in a door-mounted installation.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by the separate CP 25 tweeter, which uses a 29 mm soft Tetolon fiber dome and a neodymium magnet. Its 25 mm voice coil is ferrofluid-cooled, while the rear chamber contains damping material. The tweeter faceplate uses FEM-optimized geometry intended to support more consistent response when installed off-axis.\u003c\/p\u003e\u003cp\u003eA CPCX 690 passive crossover divides the signal between the woofer and tweeter at 3.1 kHz. It provides a 6 dB-per-octave low-pass section for the woofer and a 12 dB-per-octave high-pass section for the tweeter. The crossover's three-position tweeter-level setting helps tailor upper-frequency output to the vehicle, mounting location, and listener preference.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Component Layout:\u003c\/strong\u003e Separates woofer and tweeter for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Continuous Power:\u003c\/strong\u003e Supports properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Woofer Cone:\u003c\/strong\u003e Water-repellent cone balances stiffness and low mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Soft-dome design handles upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Directs frequencies to the appropriate speaker driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Select -2 dB, 0 dB, or +2 dB.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CP 690 woofer combines a water-repellent pressed-paper cone, double-layer voice coil, ferrite magnet assembly, low-carbon polar plates, and a transparent three-spoke basket. The CP 25 tweeter uses a Tetolon fiber dome, neodymium magnet, ferrofluid-cooled voice coil, damped rear chamber, and FEM-optimized faceplate. The compact CPCX 690 crossover uses metallic-finish 160 V polyester-film capacitors, pure-copper inductors, and venting for heat dissipation.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has suitable 6x9 mounting locations and adequate mounting depth before installation; the CP 690 mounting depth is listed as 85 mm. Route the amplifier or head-unit speaker output through the CPCX 690 crossover, then connect its dedicated woofer and tweeter outputs to the respective drivers. Use secure mounting, protect wiring from sharp edges and moving parts, and select the tweeter-level setting after listening from the driver's seat.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631721668678,"sku":"CPK690","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ntsdFbe3L.jpg?v=1784378956"},{"product_id":"hertz-cpx690-6x9-3-way-coaxial-speakers-with-grilles","title":"Hertz CPX690 6x9 3-Way Coaxial Speakers with Grilles","description":"\u003cp\u003eThe Hertz CPX690 is a 6x9-inch three-way coaxial speaker designed for vehicle audio upgrades where a full-range rear-deck or horizontal mounting solution is needed. Its integrated woofer, tweeter, and supertweeter combine multiple frequency ranges in one speaker assembly. This makes it a practical option for replacing factory 6x9 speakers while retaining a straightforward coaxial layout.\u003c\/p\u003e\u003cp\u003eWith 120 watts continuous power handling and a 4-ohm nominal impedance, the CPX690 is suited to systems using an aftermarket head unit or appropriately matched amplifier channels. Its 35 Hz to 24 kHz frequency-response specification covers bass, midrange, and high-frequency reproduction within one coaxial design. The 94 dB SPL specification supports efficient output from a properly configured car-audio system.\u003c\/p\u003e\u003cp\u003eThe woofer uses a water-repellent pressed-paper cone with FEM-optimized geometry, paired with a wide rubber suspension. This construction is intended to balance rigidity, damping, and excursion in automotive use. A ferrite woofer magnet and low-carbon polar plates support the motor system.\u003c\/p\u003e\u003cp\u003eFor upper frequencies, the CPX690 uses a 32 mm Tetolon-dome tweeter and a 24 mm Tetolon-dome supertweeter, both with neodymium magnets. The speaker's integrated crossover is specified at 4 kHz and 10 kHz with 6 dB-per-octave slopes. Its faceplate geometry is optimized for off-axis response, an important consideration in horizontal rear-deck installations.\u003c\/p\u003e\u003cp\u003eThe CPX690 fits well as part of a balanced upgrade that includes compatible front speakers, a source unit, and amplification matched to its 4-ohm load and 120-watt continuous rating. A metal-finished basket, rubber magnet cover, and radial ventilation are incorporated into the design. Protective grilles are supplied for installations where the speaker face is exposed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, tweeter, and supertweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W Continuous Handling:\u003c\/strong\u003e Supports properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Helps provide controlled cone behavior in automotive environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Drivers:\u003c\/strong\u003e Tweeter and supertweeter cover upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between the three driver sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Protective Grilles:\u003c\/strong\u003e Add protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CPX690 uses a metal-finished basket with radial ventilation and an anti-vibration rubber magnet cover. Its woofer combines a ferrite magnet, water-repellent pressed-paper cone, and wide rubber suspension. The supplied grilles use a high-resistance ABS structure with metallic finish and protective metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 6x9-inch speakers and compare available space with the manufacturer's published dimensions before installation. Connect each speaker to a compatible 4-ohm channel, observe correct polarity, and match amplifier output responsibly to the 120-watt continuous power rating. The design is particularly suited to horizontal and rear-deck mounting locations where off-axis high-frequency response matters.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631722061894,"sku":"CPX690","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ytAghproL.jpg?v=1784379344"},{"product_id":"hertz-cx690-6x9-three-way-coaxial-speakers","title":"Hertz CX690 6x9\" Three-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz CX690 is a pair of 6x9-inch three-way coaxial car speakers designed for factory-location upgrades and custom horizontal installations. Its integrated woofer, dome tweeter, and dome supertweeter consolidate full-range reproduction into each speaker assembly. This makes it a practical option for vehicles that use elliptical 6x9-inch speaker locations.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous power handling and a 4-ohm impedance, the CX690 can be used with an appropriate aftermarket amplifier or a compatible car stereo. Its 93.5 dB sensitivity supports strong output from available power. The specified 40 Hz to 23 kHz frequency response covers bass, midrange, and high-frequency content within a single coaxial design.\u003c\/p\u003e\u003cp\u003eThe 6x9-inch woofer uses Hertz SPP-M semi-pressed paper reinforced with mica powder. This cone material is engineered to balance low moving mass with damping characteristics. A wide rubber surround supports woofer excursion while helping control unwanted resonance.\u003c\/p\u003e\u003cp\u003eFor upper-frequency reproduction, the CX690 combines a 40 mm dome tweeter with a 20 mm dome supertweeter. The tweeter faceplate geometry is optimized for off-axis listening, an important consideration in many rear-deck and door installations. This three-way arrangement is intended to maintain high-frequency presence when the speakers are installed horizontally.\u003c\/p\u003e\u003cp\u003eA high-density ferrite woofer motor, low-carbon steel polar plates, and a rubber-covered metallic-finish basket support the speaker's mechanical design. The included grilles add protection where the installation permits their use. The CX690 can serve as a direct 6x9-inch replacement or as part of a broader Hertz Cento speaker-system upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, tweeter, and supertweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cone:\u003c\/strong\u003e Paper-mica cone balances lightness and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Supports use with suitable aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm Dome Tweeter:\u003c\/strong\u003e Handles mid-high frequencies within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 mm Dome Supertweeter:\u003c\/strong\u003e Extends high-frequency output for horizontal mounting positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles Included:\u003c\/strong\u003e ABS and metal-mesh grilles help protect the speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CX690 uses a semi-pressed paper-mica woofer cone, wide rubber suspension, high-density ferrite woofer magnet, and neodymium tweeter magnet. Its metallic-finish basket is paired with a rubber magnet cover intended to damp spurious vibration. The supplied grille uses a high-resistance ABS support with protective metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available 6x9-inch opening, mounting depth, clearance behind the mounting surface, and grille clearance before installation. The speaker has a listed mounting depth of 78.5 mm (3.09 inches), so adapters or spacers may be needed in some vehicles. Connect each speaker to a 4-ohm-compatible amplifier or head-unit channel and use clean, properly set power within its rated handling limits.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631724060742,"sku":"CX690","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/716wZc4umRL.jpg?v=1784379686"},{"product_id":"hertz-dcx-690-3-6x9-3-way-coaxial-speakers","title":"Hertz DCX 690.3 6x9 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz DCX 690.3 is a 6 x 9-inch three-way coaxial speaker designed for replacing compatible factory speakers in a vehicle. Its integrated woofer, midrange tweeter, and supertweeter provide a complete speaker assembly for locations that accept 6 x 9-inch drivers. It is intended for listeners who want a straightforward full-range speaker upgrade without installing separate crossover networks and individual drivers.\u003c\/p\u003e\u003cp\u003eWith 90 watts continuous power handling, 180 watts peak power handling, and a 4-ohm impedance, the DCX 690.3 can be matched with compatible car-audio amplification or a suitable factory or aftermarket receiver. Its 93 dB SPL sensitivity and 45 Hz to 21 kHz frequency-response rating describe a design built to cover bass, midrange, and treble frequencies from one mounting location. The three-way layout includes a 60 mm paper tweeter and a 15 mm PEI-dome supertweeter.\u003c\/p\u003e\u003cp\u003eThe woofer uses a water-repellent pressed-paper cone and a TPU surround. Hertz specifies high-density-flux ferrite magnets for both the woofer and tweeter, along with a 25 mm pure-copper woofer voice coil wound on a Conex former. These materials support the speaker's intended mobile-audio use while the coaxial format keeps the installation concentrated in a single 6 x 9-inch opening.\u003c\/p\u003e\u003cp\u003eHertz also equips the DCX 690.3 with a DIN-size basket finished with abrasion-resistant dust paint, tin-plated high-current terminals, and silver-plated lead wires. The motor assembly uses low-carbon-content plates, and the speaker includes a butyl-rubber protective cover for the magnet area. These construction details address the electrical connections, moving assembly, and physical protection required in an automotive installation.\u003c\/p\u003e\u003cp\u003eThis model fits naturally into an entry-level or replacement-speaker system where compatible 6 x 9-inch mounting locations are available. It can be used as a pair for front, rear, or parcel-shelf speaker positions when vehicle fitment and mounting clearance are confirmed. For a more complete system upgrade, select an amplifier or receiver that is appropriate for its 4-ohm load and 90-watt continuous power rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, tweeter, and supertweeter sections in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Format:\u003c\/strong\u003e Fits applications designed for compatible oval 6 x 9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W Continuous Handling:\u003c\/strong\u003e Supports power matching with compatible car-audio electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTPU Surround:\u003c\/strong\u003e Provides the woofer with a flexible suspension component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grille:\u003c\/strong\u003e Adds a protective cover option for suitable installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DCX 690.3 combines a water-repellent pressed-paper woofer cone with a TPU surround, high-density-flux ferrite magnets, and a PEI supertweeter dome. Its 25 mm pure-copper voice coil is wound on a Conex former, while the basket uses an abrasion-resistant painted finish. Tin-plated terminals, silver-plated lead wires, low-carbon plates, epoxy motor-to-basket bonding, and a butyl-rubber protective cover are specified construction details.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting opening, mounting depth, and panel clearance before installation. Hertz lists overall dimensions of 237 x 162 mm, mounting dimensions of 224 x 153 mm, a total depth of 98 mm, and a mounting depth of 77 mm. Connect the speakers to a compatible 4-ohm amplifier or receiver, observe correct polarity, and use the included grilles where the speaker faces need protection.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631728418886,"sku":"DCX690-3","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/816EXKPJ_pL.jpg?v=1784380160"},{"product_id":"hertz-hd14h-6x9-saddlebag-lid-speaker-kit-with-harness","title":"Hertz HD14H 6x9 Saddlebag Lid Speaker Kit with Harness","description":"\u003cp\u003eThe Hertz HD14H is a motorcycle saddlebag-lid speaker installation kit with a dedicated speaker harness for select Harley-Davidson touring motorcycles. It provides the hardware and wiring needed to add 6x9-inch speakers to compatible non-speaker saddlebag lids. Speakers are not included.\u003c\/p\u003e\u003cp\u003eThis kit is intended for riders building or expanding a motorcycle audio system and wanting a clean saddlebag speaker location. The included grille and mounting structure are designed to integrate into the saddlebag lids after the required cutting process. It is a practical fit for systems using Hertz SX 690 NEO.1 speakers.\u003c\/p\u003e\u003cp\u003eHD14H combines the HD14 lid-installation components with a four-part speaker wire harness. The harness is designed for plug-and-play connection within the compatible motorcycle application, helping route speaker wiring from the motorcycle to each saddlebag. Proper cable routing is important to avoid moving, hot, or pinch-prone areas.\u003c\/p\u003e\u003cp\u003eThe kit includes grilles, speaker mounting structures, cut templates, gaskets, and installation hardware for a matched left-and-right saddlebag setup. The grilles measure 6.47 by 9.19 inches and provide a finished appearance over the speaker locations. Adhesive speaker gaskets are included to help prevent water infiltration around the mounts.\u003c\/p\u003e\u003cp\u003eHD14H is an installation accessory rather than a powered audio component, so it does not have amplifier power ratings or speaker impedance specifications. Pair it with compatible 6x9-inch speakers, suitable amplification, and the appropriate motorcycle audio source equipment. Confirm motorcycle fitment and lid-lock configuration before purchase or installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Speaker Provision:\u003c\/strong\u003e Creates mounting locations for compatible 6x9-inch saddlebag speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Part Harness:\u003c\/strong\u003e Provides wiring sections for connection to both saddlebags.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHertz Speaker Match:\u003c\/strong\u003e Designed for Hertz SX 690 NEO.1 speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Mounting Hardware:\u003c\/strong\u003e Includes templates, grilles, mounts, gaskets, and screws.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Infiltration Support:\u003c\/strong\u003e Adhesive gaskets help seal the speaker-mount area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-Specific Fitment:\u003c\/strong\u003e Fits specified Harley-Davidson hard-saddlebag applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HD14H uses purpose-designed grilles and speaker mounting structures for a coordinated saddlebag-lid installation. Its grilles have a high-gloss black, paintable finish, while the kit is described as using weather-resistant material. The design retains use of the motorcycle's factory hinge and latch hardware where applicable.\u003c\/p\u003e\u003cp\u003eInstallation requires removal of the saddlebags and lid hardware, masking and cutting the lids with the supplied templates, mounting the grille and speaker structure, and routing the harness through a grommet opening. Hertz specifies a 3 mm pilot hole for template mounting, a 10 mm starter hole for cutting, and a 16 mm saddlebag hole for the speaker-wire grommet. The kit is not compatible with factory-equipped electric lid locks, and speakers, cable-tie mounts, audio source equipment, and amplification are not included.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631731761222,"sku":"HD14H","price":452.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81iwzeMg9EL_37a91552-639b-4ad9-b80e-e113b9ef281c.jpg?v=1784380804"},{"product_id":"hertz-mpx690-3-6x9-three-way-coaxial-speakers","title":"Hertz MPX690-3 6x9\" Three-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz Mille Pro MPX 690.3 is a pair of 6x9-inch three-way coaxial car speakers designed for full-range rear-deck applications. It combines a woofer, a dedicated tweeter, and a supertweeter in each speaker to provide broad frequency coverage from a single mounting location. This makes it a practical upgrade for vehicles with factory 6x9 speaker positions where stronger output and more high-frequency extension are desired.\u003c\/p\u003e\u003cp\u003eRated at 130 watts continuous power handling and 260 watts peak per speaker, the MPX 690.3 is intended for systems that can support a substantial 4-ohm speaker load. Its 94 dB SPL sensitivity helps it produce useful output with compatible aftermarket amplification or a capable head unit. The integrated crossover separates the driver ranges at specified frequencies, so no separate external passive crossover is required for normal use.\u003c\/p\u003e\u003cp\u003eThe woofer uses a pressed-pulp cone reinforced with cotton fibers, paired with a large rubber surround for controlled excursion. A 38 mm pure-copper voice coil on a Polyamide former is designed to manage sustained power while supporting dynamic playback. The high-density flux ferrite woofer motor and low-carbon iron plates are part of the speaker's high-power design.\u003c\/p\u003e\u003cp\u003eFor upper frequencies, the MPX 690.3 uses a 35 mm Tetolon-dome tweeter with a neodymium magnet and a 29 mm Tetolon-dome supertweeter. The tweeter faceplate geometry is engineered to support off-axis response, an important consideration for horizontal rear-deck mounting. Together, the two high-frequency drivers extend the rated response to 24 kHz.\u003c\/p\u003e\u003cp\u003eAn aluminum-alloy basket, radial venting, and an anti-vibration rubber magnet cover support the speaker's mechanical design. The package includes protective metal-mesh grilles for installations where the speakers are exposed. Match the speakers to a vehicle with suitable 6x9 mounting space and verify depth, opening, and grille clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer, tweeter, and supertweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130W Continuous Handling:\u003c\/strong\u003e Supports higher-powered compatible car audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Pulp Woofer Cone:\u003c\/strong\u003e Cotton fibers balance stiffness and low moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon High-Frequency Drivers:\u003c\/strong\u003e Tweeter and supertweeter extend upper-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Divides driver ranges without a separate crossover box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Metal-Mesh Grilles:\u003c\/strong\u003e Provides protection for exposed speaker installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPX 690.3 uses a pressed-pulp-and-cotton-fiber cone, large rubber surround, high-density flux ferrite woofer magnet, neodymium tweeter magnet, and aluminum-alloy basket. Its 38 mm woofer voice coil is pure copper wound on a Polyamide former, while the tweeter and supertweeter use Tetolon domes. Radial basket venting and a rubber magnet cover are incorporated to manage operating heat and unwanted vibration.\u003c\/p\u003e\u003cp\u003eThese speakers are optimized for rear-deck mounting and require a compatible 6x9 opening with sufficient depth and clearance. Confirm the 241 mm by 223 mm outer dimensions, 90 mm mounting depth dimension, and the vehicle's mounting-hole pattern before ordering. Wire each speaker with correct polarity to a 4-ohm-compatible source or amplifier, and avoid exceeding the 130-watt continuous power rating per speaker.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631832490054,"sku":"MPX690-3","price":619.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71HxVMOJ-UL.jpg?v=1784383457"},{"product_id":"hertz-sx690neo-1-6x9-3-way-coaxial-speakers","title":"Hertz SX690NEO-1 6x9\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz SX690NEO-1 is a pair of 6x9-inch, 3-way SPL coaxial speakers designed for car-audio systems that need strong midrange and high-frequency output from a compact speaker location. Each speaker combines a 6x9 woofer, dome tweeter, and dome super tweeter in one assembly. This format helps simplify an upgrade where separate tweeter mounting is not desired.\u003c\/p\u003e\u003cp\u003eWith 130 watts continuous power handling and a 4-ohm nominal impedance, these speakers are suited to amplified systems as well as carefully matched high-output speaker installations. Their 94 dB sensitivity supports efficient output when paired with an appropriate amplifier. The specified 65 Hz to 24 kHz frequency response covers upper bass through extended high frequencies.\u003c\/p\u003e\u003cp\u003eThe SX690NEO-1 uses a 3-way coaxial layout to concentrate vocal, instrument, and treble reproduction in a single 6x9-inch mounting position. A built-in crossover directs the tweeter at 4 kHz and the super tweeter at 10 kHz, both at 6 dB per octave. A resettable solid-state protection circuit is included for the tweeter section.\u003c\/p\u003e\u003cp\u003eIts woofer uses a high-stiffness pressed-paper cone with water-repellent, humidity-resistant, and anti-UV treatments. The motor structure uses neodymium magnets, helping keep the speaker assembly relatively compact for its output class. A double-layer copper voice coil on a polyamide former supports the stated power-handling capability.\u003c\/p\u003e\u003cp\u003eThese Hertz SPL Show speakers are a practical fit for listeners building a louder full-range system with dedicated subwoofers handling the lowest bass. Hertz specifies a 60 Hz high-pass filter at 12 dB per octave for SPL-oriented operation. Double Faston terminals also support daisy-chaining multiple units where the amplifier and final impedance load are correctly planned.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Layout:\u003c\/strong\u003e Combines woofer, tweeter, and super tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e130W Continuous Handling:\u003c\/strong\u003e Supports use with appropriately matched external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor System:\u003c\/strong\u003e Provides compact magnetic assemblies for the woofer and high-frequency drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Paper Cone:\u003c\/strong\u003e Resists water, humidity, and UV exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated High-Frequency Protection:\u003c\/strong\u003e Resettable solid-state circuitry protects the tweeter section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProvided Protective Grille:\u003c\/strong\u003e ABS frame and metal mesh help shield the speaker face.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SX690NEO-1 combines a water-repellent pressed-paper cone with Tetolon high-frequency domes and neodymium magnets. Its woofer has a 38 mm voice coil, while the tweeter and super tweeter use 25 mm and 20 mm voice coils respectively. The provided MPG 690 grille uses a high-resistance ABS structure with a metallic finish and protective metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm available mounting clearance before installation using the published 237.5 x 225 mm outer dimensions and 93 mm overall depth. Use the speakers with a stable 4-ohm-capable amplifier and observe the amplifier's minimum impedance when daisy-chaining speakers. For Hertz's SPL-oriented setup guidance, apply a 60 Hz high-pass filter with a 12 dB-per-octave slope.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631860834374,"sku":"SX690NEO-1","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71b3LTIcbGL.jpg?v=1784384605"},{"product_id":"hertz-x-690-6x9-4-way-coaxial-speakers","title":"Hertz X 690 6x9\" 4-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz X 690 is a pair of 6x9-inch four-way coaxial car speakers designed for vehicles with compatible factory 6x9 speaker locations. It provides an all-in-one replacement solution by combining woofer, tweeter, and super-tweeter elements in each speaker. This makes it a practical option for upgrading worn factory speakers while retaining a conventional coaxial installation format.\u003c\/p\u003e\u003cp\u003eWith 85 watts continuous power handling, 340 watts peak power handling, and a 4-ohm impedance, the X 690 is suited to systems using a compatible aftermarket head unit or amplifier. Its 94 dB SPL sensitivity supports useful output from modest available power. The rated 45 Hz to 22 kHz frequency response covers bass, midrange, and upper-frequency reproduction within one speaker assembly.\u003c\/p\u003e\u003cp\u003eThe four-way design uses a 40 mm PEI tweeter and two 15 mm piezoelectric super-tweeters above the 6x9 woofer. This arrangement is intended to extend high-frequency output beyond 20 kHz while keeping the additional drivers integrated into the coaxial speaker. The tweeter and super-tweeter faceplate is designed for off-axis listening positions common in vehicle interiors.\u003c\/p\u003e\u003cp\u003eFor low- and mid-frequency output, Hertz uses a water-repellent pressed-paper cone with a foam surround. The woofer employs a 25 mm pure-copper voice coil and a high-density-flux ferrite magnet. These materials are paired with a stated mechanical excursion of ±4.3 mm.\u003c\/p\u003e\u003cp\u003eThe X 690 can be used as a direct-format upgrade in compatible 6x9 door, rear-deck, or other OEM speaker locations. Its DIN-size basket is finished with abrasion-resistant dust paint, and Hertz lists grilles as included. Before installation, compare the vehicle opening and available depth with the published physical dimensions and allow clearance for the speaker's integrated driver assembly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Coaxial Layout:\u003c\/strong\u003e Integrates woofer, tweeter, and dual super-tweeters into each 6x9 speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85W Continuous Handling:\u003c\/strong\u003e Supports matching with compatible aftermarket source units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Piezoelectric Super-Tweeters:\u003c\/strong\u003e Extends the rated response above 20 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Systems:\u003c\/strong\u003e Uses a high-density-flux woofer magnet and ferrite tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Adds protection when the installation location requires exposed speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe X 690 uses a metallic-grey, high-stiffness pressed-paper cone with water-repellent treatment and a foam surround. Its woofer has a 25 mm pure-copper voice coil, while the 40 mm PEI tweeter uses a ferrite motor. The basket is DIN-size and protected by abrasion-resistant dust paint.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts 6x9-inch speakers and check the manufacturer's A through I physical measurements before purchase. Use vehicle-appropriate mounting adapters, hardware, and wiring connections where required by the vehicle. For power matching, use a compatible 4-ohm channel and avoid exceeding the speaker's 85-watt continuous power rating.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631894880326,"sku":"X690","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Uru0H9XwL.jpg?v=1784385642"},{"product_id":"hifonics-zs693-6-x-9-inch-3-way-coaxial-speakers","title":"Hifonics ZS693 6 x 9-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Hifonics ZS693 is a pair of 6 x 9-inch, 3-way coaxial car speakers designed to replace compatible factory speakers with a full-range upgrade. Each speaker combines a woofer, midrange, and tweeter in one assembly, helping simplify installation where a 6 x 9-inch coaxial speaker fits. They are suited to drivers who want an economical replacement or system refresh without moving to separate component speakers.\u003c\/p\u003e\u003cp\u003eThe ZS693 uses a 4-ohm design and is rated for 60 watts RMS per speaker, or 120 watts RMS for the pair. Its 46 Hz to 20 kHz frequency response and 88 dB sensitivity support broad full-range playback from a compatible factory head unit or external amplifier. For amplifier matching, prioritize the continuous RMS rating rather than the higher peak-power figure.\u003c\/p\u003e\u003cp\u003eA 1-inch Neo-Mylar soft-dome tweeter handles upper-frequency detail, while the Alpha-Cellulose woofer cone is designed for low weight and rigidity. The 3-way coaxial layout places the high-frequency drivers at the center of the woofer, providing a compact all-in-one speaker arrangement. A passive Butterworth crossover manages the transition between the speaker elements.\u003c\/p\u003e\u003cp\u003eHifonics builds the ZS693 with a pure-copper voice coil on a lightweight Kapton former, an epoxy-infused natural-fiber spider, and an Overcoil cooling system. These parts are intended to support reliable movement and heat management during normal operation. The speaker also uses a ferrite magnet motor and an anti-resonant stamped-steel basket.\u003c\/p\u003e\u003cp\u003eThis pair can be used in compatible front-door, rear-deck, or rear-panel locations, depending on the vehicle's factory speaker position and available clearance. Confirm the 8.64 x 5.98-inch cutout requirement and 3.35-inch mounting depth before purchase. It is a practical fit for a factory-speaker replacement project or as part of a modest amplified car-audio upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements into each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Size:\u003c\/strong\u003e Fits vehicles designed for compatible oval 6 x 9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Per Speaker:\u003c\/strong\u003e Supports sensible matching with compatible head units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction in a compact layout.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Cone:\u003c\/strong\u003e Combines low weight with a rigid woofer-cone structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoil Cooling:\u003c\/strong\u003e Moves air over the voice coil through the spider.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZS693 uses an anti-resonant stamped-steel basket, ferrite magnet, rubber surround, and epoxy-infused natural-fiber spider. Its pure-copper voice coil is fitted to a Kapton former for lightweight heat dissipation. Spade terminals allow connection with compatible spade connectors or direct soldering.\u003c\/p\u003e\u003cp\u003eMeasure the factory opening, outside clearance, and mounting depth before installation; the listed cutout is 8.64 x 5.98 inches and mounting depth is 3.35 inches. Connect positive and negative speaker leads to the correct terminals, secure the speaker firmly, and keep wiring protected from metal edges and moving window mechanisms. The manufacturer recommends considering professional installation when interior-panel removal or custom mounting is required.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631971754054,"sku":"ZS693","price":51.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71DJ95qxE2L.jpg?v=1784390979"},{"product_id":"infinity-kappa-693cf-6x9-two-way-component-speakers","title":"Infinity Kappa 693CF 6x9\" Two-Way Component Speakers","description":"\u003cp\u003eThe Infinity Kappa 693CF is a 6 x 9-inch two-way component speaker system designed for vehicle owners replacing factory speakers with a separate woofer, tweeter, and external crossover layout. Its component design allows the tweeters to be mounted independently from the woofers for more flexible placement. The system is rated at 145 watts RMS and uses a 3-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThis system is intended for vehicles with suitable 6 x 9-inch speaker locations and space for separate crossover networks. The 94 dB sensitivity rating helps it produce useful output from compatible factory or aftermarket power. An amplifier capable of operating with a 3-ohm speaker load is a practical match when using the system at higher listening levels.\u003c\/p\u003e\u003cp\u003eThe Kappa 693CF combines Plus One glass-fiber woofer cones with hi-roll rubber surrounds. The woofer construction is designed to provide a rigid, lightweight moving surface while the rubber surround supports cone movement. Its specified frequency response is 35 Hz to 40 kHz.\u003c\/p\u003e\u003cp\u003eSeparate 3\/4-inch edge-driven silk dome tweeters handle the upper-frequency range. The included crossover networks provide a selectable 0 dB or -3 dB tweeter output setting, allowing adjustment based on tweeter location and cabin acoustics. Surface, flush, and factory-location mounting hardware gives installers several placement options.\u003c\/p\u003e\u003cp\u003eThe system also supports a future three-way configuration through its selectable 2-way\/3-way crossover design. A compatible optional Kappa midrange can be added to expand the system beyond its supplied two-way arrangement. This makes the Kappa 693CF suitable for staged upgrades where the front-stage layout may evolve over time.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e145W RMS Power Handling:\u003c\/strong\u003e Supports substantial power from a compatible audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Glass-Fiber Woofers:\u003c\/strong\u003e Rigid glass-fiber cones and rubber surrounds support controlled output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeters:\u003c\/strong\u003e 3\/4-inch edge-driven tweeters extend response to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Level:\u003c\/strong\u003e Select 0 dB or -3 dB tweeter output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Upgrade Path:\u003c\/strong\u003e Selectable crossover accommodates a compatible optional midrange.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Kappa 693CF uses glass-fiber woofer cones, hi-roll rubber surrounds, ferrite motor structures, and 3\/4-inch silk dome tweeters. Its external crossovers use attached input, woofer-output, and tweeter-output leads. The crossover housing is slim and includes switches for tweeter level and two-way or three-way operation.\u003c\/p\u003e\u003cp\u003eVerify vehicle-specific fitment before purchase, including a 220 x 147 mm mounting cutout and approximately 80.1 mm of woofer mounting depth. The package includes hardware for woofer installation plus surface, flush, and Starfish tweeter mounting options. Install the supplied crossovers between the signal source or amplifier and the separate woofer and tweeter connections, observing polarity and selecting the desired tweeter level before final panel reassembly.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632032604230,"sku":"INFSPKKA693CFAM","price":419.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61XrmITJoKL.jpg?v=1784392251"},{"product_id":"infinity-kappa-693m-6-x-9-three-way-car-speakers","title":"Infinity KAPPA 693M 6\" x 9\" Three-Way Car Speakers","description":"\u003cp\u003eThe Infinity KAPPA 693M is a pair of 6-inch by 9-inch, three-way car speakers designed for upgrading compatible factory speaker locations. They provide a full-range replacement option for listeners seeking stronger bass presence, clear midrange detail, and extended high-frequency response from a coaxial speaker format. With a 3-ohm nominal impedance and 94 dB sensitivity rating, they are intended for use with properly compatible car-audio power.\u003c\/p\u003e\u003cp\u003eThis speaker pair is suited to vehicles with 6 x 9-inch openings where mounting depth and cutout dimensions allow installation. Its three-way design combines a large oval woofer section with integrated upper-frequency drivers, helping consolidate a broad frequency range into each speaker location. The rated frequency response extends from 35 Hz to 40 kHz.\u003c\/p\u003e\u003cp\u003eInfinity uses patented Plus One glass-fiber woofer cones in the KAPPA 693M. The cone design increases usable cone area while the glass-fiber construction is intended to maintain rigidity at higher output levels. A rubber surround supports woofer movement and durability in automotive use.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the KAPPA 693M uses an edge-driven silk dome tweeter with an oversized voice coil. The tweeter output can be set to either 0 dB or -3 dB using the push-button control on the angled tweeter assembly. This adjustment can help accommodate installations where tweeter placement makes the top end sound more prominent.\u003c\/p\u003e\u003cp\u003eThe KAPPA 693M is supplied as a complete pair with grilles, foam gaskets, spacers, mounting hardware, logo badges, and documentation. It is a practical fit for a rear deck, door, or other compatible 6 x 9-inch speaker position after confirming physical clearance. For amplified systems, match the amplifier to the speakers' 120-watt RMS power handling and 3-ohm load requirement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Integrates multiple drivers in each 6 x 9-inch speaker for broad-range sound from a single mounting location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W RMS Power Handling:\u003c\/strong\u003e Supports up to 120 watts RMS and 360 watts peak per speaker when paired with appropriate amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Glass-Fiber Woofer:\u003c\/strong\u003e Uses a rigid, lightweight cone design with increased cone area for low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Edge-driven tweeter design extends high-frequency response to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Control:\u003c\/strong\u003e Select 0 dB or -3 dB tweeter output to better suit the installation location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hardware Included:\u003c\/strong\u003e Includes grilles, gaskets, spacers, screws, speed clips, badges, and an owner's manual.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KAPPA 693M uses glass-fiber woofer cones, rubber surrounds, and edge-driven silk dome tweeters in a black multi-element speaker design. The 6 x 9-inch format provides a large oval woofer surface while retaining an integrated three-way layout. Grilles are included for installations where the speaker face will be exposed.\u003c\/p\u003e\u003cp\u003eBefore ordering, compare the vehicle's speaker opening, mounting hole pattern, and available depth with the speaker's fitment requirements. The listed top-mount depth is 3-5\/32 inches, and the supplied foam gaskets and spacers may assist with a secure installation where appropriate. Connect each speaker with correct polarity and use an amplifier or head unit that is stable with a 3-ohm speaker load.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632035749958,"sku":"INFSPKKA693MAM","price":335.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/610Do2fPNPS.jpg?v=1784392302"},{"product_id":"infinity-kappa-perfect-900x-6-x-9-motorcycle-speakers","title":"Infinity Kappa Perfect 900X 6\" x 9\" Motorcycle Speakers","description":"\u003cp\u003eThe Infinity Kappa Perfect 900X is a pair of premium 6\" x 9\" two-way speakers engineered for motorcycle audio upgrades. It is designed for selected Harley-Davidson Touring Series motorcycles from 2014 and later. The system provides a purpose-built solution for riders seeking a larger bag-lid speaker upgrade with motorcycle-focused weather resistance.\u003c\/p\u003e\u003cp\u003eWith 100 watts RMS and 300 watts peak power handling, the Kappa Perfect 900X is intended for systems that need substantial output capability from a compact motorcycle installation. Its 95dB sensitivity and 3-ohm impedance support efficient performance when paired with appropriately compatible amplification. The stated 50Hz to 20kHz frequency response covers bass, midrange, and treble information for full-range playback.\u003c\/p\u003e\u003cp\u003eThe speaker uses a lightweight basalt-fiber woofer cone with Harman's Plus One technology. This cone approach increases the effective cone area while maintaining a light diaphragm material. A rubber surround supports the woofer assembly for mobile outdoor use.\u003c\/p\u003e\u003cp\u003eA 1-inch edge-driven polyphenylene sulfide dome tweeter handles high-frequency reproduction. Its removable design allows the system to be configured as a coaxial speaker or converted for component-style installation using the included tweeter kits. This flexibility lets installers choose between an integrated speaker layout and more separate tweeter placement.\u003c\/p\u003e\u003cp\u003eThe Kappa Perfect 900X is built with a neodymium magnet structure to reduce weight while supporting efficient operation. The speaker front is rated IPX5, while the rear side is described as weather resistant. Included mounting brackets, templates, grilles, crossover pigtails, and hardware support installation in its intended motorcycle application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" x 9\" Two-Way System:\u003c\/strong\u003e Provides a motorcycle-focused full-range speaker upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power Handling:\u003c\/strong\u003e Supports higher-output amplified audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable 1-Inch Tweeter:\u003c\/strong\u003e Enables coaxial or component-style installation options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasalt Fiber Woofer:\u003c\/strong\u003e Uses a lightweight cone with Plus One technology.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Front Protection:\u003c\/strong\u003e Helps the speaker front handle water exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Reduces weight for motorcycle-oriented installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Kappa Perfect 900X combines a basalt-fiber woofer cone, rubber surround, edge-driven polyphenylene sulfide dome tweeter, and neodymium magnet motor structure. Its gloss and satin black finish is styled for motorcycle applications. The front of each speaker is IPX5 rated, while the back side is weather resistant.\u003c\/p\u003e\u003cp\u003eThis kit is intended for selected Harley-Davidson Touring Series motorcycles from 2014 and later. It includes bag-lid grilles, inner mounting brackets, mounting templates, speaker and grille screws, in-line crossover pigtails, and tweeter kits. Confirm motorcycle fitment, available mounting clearance, wiring condition, and amplifier compatibility with the 3-ohm speaker load before installation.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632036667462,"sku":"INFSPKKP900XAM","price":652.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81Npm5AjsES.jpg?v=1784392389"},{"product_id":"infinity-primus-693m-6x9-3-way-speakers","title":"Infinity Primus 693M 6\"x9\" 3-Way Speakers","description":"\u003cp\u003eThe Infinity Primus 693M is a pair of 6\"x9\" 3-way car speakers designed for replacing factory speakers or building a straightforward vehicle-audio upgrade. They provide a larger-format speaker option for vehicles with compatible 6\"x9\" mounting locations. With 60 watts RMS power handling per speaker, they can be matched with an appropriate aftermarket receiver or amplifier.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want clearer everyday playback from a full-range speaker pair without adding separate component tweeters and crossovers. The 93 dB sensitivity rating supports useful output from modest-power systems. Their 50 Hz to 20 kHz frequency-response specification covers bass, midrange, and high-frequency playback within a single 3-way speaker assembly.\u003c\/p\u003e\u003cp\u003eA 6\"x9\" polypropylene woofer handles the main low- and mid-frequency range, while a 3\/4\" silk-dome tweeter is used for high-frequency detail. The speaker's crossover point is specified at 5 kHz with a 6 dB-per-octave slope. This design is suited to a practical replacement upgrade where balanced full-range sound is the goal.\u003c\/p\u003e\u003cp\u003eInfinity's Plus One woofer-cone architecture increases usable cone area compared with conventional cones in its class. The manufacturer specifies up to 35% more cone area, which is intended to support sensitivity and low-frequency output. A vented basket frame promotes voice-coil cooling as the speaker operates.\u003c\/p\u003e\u003cp\u003eThe Primus 693M is a 3-ohm nominal-impedance design, so system matching matters when selecting an amplifier or replacement head unit. Check the vehicle's speaker opening, mounting depth, and the connected source or amplifier's 3-ohm capability before installation. The package includes installation hardware, grilles, foam gasket material, and short speaker pigtail cables for a more complete replacement-speaker installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\"x9\" 3-Way Design:\u003c\/strong\u003e Provides full-range sound from a pair of vehicle speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports continuous power up to 60 watts per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Cone:\u003c\/strong\u003e Uses increased cone area for efficient low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk-Dome Tweeter:\u003c\/strong\u003e Adds high-frequency detail with a 3\/4\" dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Impedance:\u003c\/strong\u003e Designed for compatible aftermarket car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket Frame:\u003c\/strong\u003e Helps move heat away from the voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Primus 693M uses a polypropylene 6\"x9\" woofer, a 3\/4\" silk-dome tweeter, and a super-rigid vented basket. Its all-black presentation is complemented by included grilles, while the basket ventilation is designed to aid voice-coil cooling. Infinity specifies a frequency response of 50 Hz to 20 kHz and a sensitivity of 93 dB at 2.83V\/1m.\u003c\/p\u003e\u003cp\u003eInstall these speakers only in vehicle locations that accept 6\"x9\" speakers and provide adequate clearance behind the mounting surface. Use the included screws, speed clips, foam gasket, and 18 AWG pigtail cables as appropriate for the vehicle installation, while observing correct polarity. Confirm the connected receiver or amplifier is suitable for a 3-ohm nominal load and keep continuous power within the 60W RMS rating per speaker.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632041451590,"sku":"INFSPKPR693M","price":117.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71giAgTCLfL.jpg?v=1784392626"},{"product_id":"infinity-ref697f-6x9-2-way-coaxial-car-speakers","title":"Infinity REF697F 6x9\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Infinity REF697F is a pair of 6x9-inch, 2-way coaxial car speakers designed as a direct sound-quality upgrade for compatible factory speaker locations. They combine a woofer and tweeter in each speaker, making them a practical option for vehicles that use 6x9-inch openings. Their compact frame is engineered to support installation in a broad range of vehicles.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to drivers who want clearer high frequencies, stronger midrange presence, and more low-frequency output than worn or basic factory speakers can provide. With 100 watts continuous power handling and 94 dB sensitivity at 2.83V, they can be used with compatible factory or aftermarket audio systems. An external amplifier may be used when its output is properly matched to the speakers.\u003c\/p\u003e\u003cp\u003eThe REF697F uses edge-driven textile dome tweeters to reproduce upper-frequency detail with a smooth character. The tweeter output can be adjusted by 3 dB, allowing the high-frequency balance to be tailored for the mounting location and listening preference. This is useful when speaker placement makes the system sound overly bright or subdued.\u003c\/p\u003e\u003cp\u003eInfinity's Plus One+ woofer cone architecture increases effective cone area compared with conventional cones in the same class. The polypropylene woofer cone and hi-roll rubber surround are designed to support controlled movement and everyday automotive durability. Together, these elements help the speaker cover its rated 46 Hz to 20 kHz frequency response range.\u003c\/p\u003e\u003cp\u003eAs a coaxial pair, the REF697F provides a straightforward path for upgrading front or rear speaker positions that accept 6x9-inch speakers. Its 3-ohm nominal impedance is intended to work with typical vehicle speaker wiring as part of Infinity's True Four Ohm Impedance approach. Confirm vehicle-specific fitment, mounting clearance, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for a simplified upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Power Handling:\u003c\/strong\u003e Supports properly matched factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Textile Tweeter:\u003c\/strong\u003e Delivers detailed high frequencies with a smooth presentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 dB Tweeter Adjustment:\u003c\/strong\u003e Lets you tailor treble output for placement and preference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One+ Woofer Cone:\u003c\/strong\u003e Provides increased effective cone area for sound output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for compatibility with common vehicle audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF697F uses a polypropylene Plus One+ woofer cone with a hi-roll rubber surround, paired with a 1-inch textile edge-driven dome tweeter. Its 2-way coaxial layout places the tweeter at the center of the woofer assembly, while the optimized basket design is intended to fit many factory speaker locations. The speakers have an external frame size of 9-5\/16 by 6-7\/16 inches and a total depth of 3-5\/8 inches.\u003c\/p\u003e\u003cp\u003eCheck the vehicle's speaker opening, mounting depth, panel clearance, and factory connector arrangement before purchase. The required mounting cutout is 8-1\/2 by 5-3\/4 inches, and mounting depth is 3-1\/8 inches. The package includes two speakers, two spacers, mounting screws, speed clips, foam mounting tape, and an owner's manual; vehicle-specific harness adapters, brackets, wiring, or an amplifier may be needed separately.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632082149446,"sku":"INFSPKRF697FUS","price":159.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/516GgHWZVqL.jpg?v=1784393482"},{"product_id":"infinity-infspkrf697mfus-6x9-3-way-car-speakers","title":"Infinity INFSPKRF697MFUS 6x9\" 3-Way Car Speakers","description":"\u003cp\u003eThe Infinity Reference REF697MF is a pair of 6 x 9-inch three-way car speakers designed to replace worn or limited factory speakers. They bring dedicated high-frequency drivers and a large oval woofer format to vehicles that use 6 x 9-inch speaker locations. This makes them a practical choice for listeners seeking a more capable full-range speaker upgrade without adding separate component tweeters.\u003c\/p\u003e\u003cp\u003eWith 100 watts RMS power handling and 94 dB sensitivity at 2.83V\/1m, the REF697MF can be used with a compatible factory or aftermarket receiver and can also benefit from external amplification. Its 3-ohm nominal impedance is part of Infinity's True Four Ohm Impedance approach, intended to account for resistance in factory speaker wiring. Match the speakers with an amplifier or receiver that supports their load and power requirements.\u003c\/p\u003e\u003cp\u003eThe three-way design combines a Plus One polypropylene woofer cone, an edge-driven textile dome tweeter, and a textile semi-dome supertweeter. This arrangement extends the stated frequency response from 46 Hz to 30 kHz while separating bass, midrange, and high-frequency duties across dedicated drivers. A selectable tweeter-output setting provides a +3 dB option for installations where high-frequency output needs adjustment.\u003c\/p\u003e\u003cp\u003eInfinity's Plus One woofer-cone architecture uses a larger effective cone area than conventional cones in the same class. The woofer is paired with a hi-roll rubber surround to support cone movement and everyday automotive use. Together, these design details focus on maintaining useful low-frequency output from a speaker that fits common 6 x 9-inch openings.\u003c\/p\u003e\u003cp\u003eThe REF697MF is suited to door, rear-deck, or custom-panel upgrades when vehicle clearance and mounting dimensions are verified first. Its included spacers, mounting screws, speed clips, and foam mounting tape support installation, while grilles are not included. For a complete system upgrade, pair the speakers with an appropriate amplifier, wiring, installation adapters, and vehicle-specific harnesses as needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Three-Way Design:\u003c\/strong\u003e Uses separate woofer, tweeter, and supertweeter drivers for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W RMS Power Handling:\u003c\/strong\u003e Supports compatible receiver or amplifier power for stronger output capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Provides increased cone area for efficient low-frequency and midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTextile High-Frequency Drivers:\u003c\/strong\u003e Includes an edge-driven dome tweeter and textile semi-dome supertweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Tweeter Output:\u003c\/strong\u003e Offers a +3 dB setting to tailor high-frequency balance by location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed to work with factory or aftermarket car audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF697MF uses a Plus One polypropylene woofer cone with a hi-roll rubber surround, plus textile tweeter elements for high-frequency reproduction. Its optimized frame is built around a standard 6 x 9-inch automotive speaker format. The speaker's external dimensions are 9-5\/16 x 6-7\/16 inches, with a total depth of 3-3\/4 inches.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting cutout, mounting depth, and clearance behind the panel before purchase. The required mounting cutout measures 8-1\/2 x 5-3\/4 inches, and mounting depth is 3-1\/8 inches. The package includes spacers, screws, speed clips, foam tape, and an owner's manual; vehicle-specific wiring harnesses, adapter brackets, and grilles may be required separately.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632082346054,"sku":"INFSPKRF697MFUS","price":191.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51r7kBIo0GL.jpg?v=1784393522"},{"product_id":"jbl-club-964m-6-x-9-three-way-car-speakers","title":"JBL Club 964M 6\" x 9\" Three-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 964M is a pair of 6\" x 9\" three-way car speakers for replacing factory speakers or building a more capable vehicle audio system. It is designed for vehicles with a compatible 6\" x 9\" speaker location and enough mounting clearance. With 85 watts RMS power handling per speaker, it can be used with compatible factory audio systems or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA 93 dB sensitivity rating at 2.83V helps the Club 964M produce useful output from modest power while retaining capacity for an amplified system. Its 50 Hz to 20 kHz frequency response covers low-midbass through high frequencies in one coaxial speaker assembly. The 3-ohm nominal impedance is intended to work with compatible car-audio source units and amplifiers.\u003c\/p\u003e\u003cp\u003eThe Club 964M uses JBL Plus One woofer cone architecture, which provides more cone area than conventional cones of a similar overall size. More effective cone area can support low-frequency output and sensitivity in the available mounting space. The woofer is made with an acoustically damped, UV-resistant polypropylene cone for use in the heat and humidity of a vehicle environment.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the speaker incorporates an edge-driven silk dome tweeter design. This design is intended to provide broad high-frequency coverage with a smooth presentation. The speaker's three-way construction also uses a 3 kHz crossover point specified by JBL.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a front-door, rear-deck, or cargo-area upgrade where a 6\" x 9\" location is available. They can serve as a direct speaker upgrade when factory mounting provisions are suitable, or as part of a system with an aftermarket amplifier. Confirm the vehicle opening, mounting depth, terminal clearance, and any adapter requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way 6\" x 9\" Design:\u003c\/strong\u003e Combines woofer and high-frequency drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to 85 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Provides increased cone area within the speaker frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Silk Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with broad dispersion characteristics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Uses a damped cone material suited to vehicle conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Matches compatible car stereos and aftermarket amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 964M uses a polypropylene woofer cone, butyl-rubber surround, silk edge-driven dome tweeter, and ferrite magnet motor structure. Its black speaker assembly includes protective grilles for installations that do not retain a factory grille. The design is intended for standard automotive use rather than marine or illuminated installations.\u003c\/p\u003e\u003cp\u003eVerify the mounting location before purchase: the speaker measures 236.5 mm long by 163.0 mm wide, with a 77.8 mm mounting depth and 90.4 mm total depth. Use the supplied mounting hardware only where it suits the vehicle's panel and confirm whether vehicle-specific brackets, harness adapters, or additional wiring are needed. When adding an amplifier, select a compatible channel that is appropriately matched to the speaker's 85W RMS per-speaker rating and 3-ohm nominal impedance.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632139198534,"sku":"JBLSPKCB964M","price":173.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VLun3NvvL.jpg?v=1784396981"},{"product_id":"jbl-stage3-968m-6x9-3-way-car-speakers","title":"JBL STAGE3 968M 6x9\" 3-Way Car Speakers","description":"\u003cp\u003eThe JBL STAGE3 968M is a pair of 6x9-inch three-way car speakers made for upgrading factory speaker locations with a fuller, more detailed sound. They are designed for vehicles that accept 6x9-inch speakers and include grilles for installations where the drivers will be exposed. With a 4-ohm nominal load, they can be used with a compatible car stereo or external amplifier.\u003c\/p\u003e\u003cp\u003eThese speakers handle 80 watts RMS and 640 watts peak, providing useful headroom for a properly matched car-audio system. Their 40Hz–20kHz frequency response is intended to cover bass, midrange, and high-frequency content from a single speaker assembly. A 92dB sensitivity rating at 2.83V supports efficient output from compatible source units and amplifiers.\u003c\/p\u003e\u003cp\u003eThe STAGE3 968M uses a three-way design to reproduce a broad range of music in a conventional 6x9-inch mounting format. Its PEI balanced dome tweeter is designed for clear high-frequency reproduction and sound distribution. This makes the pair a practical choice for listeners replacing worn or basic factory speakers without moving to a separate component-speaker layout.\u003c\/p\u003e\u003cp\u003eJBL's Plus One woofer cone architecture increases cone surface area compared with conventional woofer designs in its class. The laser-etched woofer cone is reinforced with 10% glass fiber to support low-frequency output and rigidity. Together, these elements focus the design on controlled, resonant bass while retaining the space-efficient footprint of a 6x9-inch speaker.\u003c\/p\u003e\u003cp\u003eFor system integration, the speakers use JBL True 4-ohm Technology, intended to help a compatible head unit or amplifier deliver its available power despite resistance elsewhere in the audio system. The package includes mounting hardware, spade clips, foam gaskets, grilles, and logo badges to support a straightforward installation. Verify vehicle-specific mounting depth, cutout dimensions, connector fit, and clearance before purchase.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Three-Way Design:\u003c\/strong\u003e Combines low, mid, and high-frequency reproduction in a factory-friendly speaker size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Power Handling:\u003c\/strong\u003e Supports use with a properly matched stereo or amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Provides increased cone surface area for improved low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Helps deliver clear, distributed high-frequency sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Load:\u003c\/strong\u003e Matches the common impedance used by many car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles and Hardware:\u003c\/strong\u003e Supplies protective grilles, screws, clips, gaskets, and badges.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STAGE3 968M uses a laser-etched woofer cone reinforced with 10% glass fiber, along with a PEI balanced dome tweeter. JBL also identifies post-consumer recycled plastic components, PVC-free wiring, and soy-ink packaging as part of the Stage3 Gen2 design. Protective grilles are included for installations that need visible speaker coverage.\u003c\/p\u003e\u003cp\u003eUse these speakers only in vehicle locations that accept a 6x9-inch speaker and provide sufficient mounting depth and clearance. Connect each speaker to a compatible 4-ohm channel, observing correct polarity and using the included spade clips where appropriate. Foam gaskets can help seal the speaker to the mounting surface; confirm factory mounting-hole alignment or use vehicle-specific adapters when required.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632140607558,"sku":"JBLSPKS3968M","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/57_738712e9-f4b5-4ad6-b70f-d97c3cbb912e.png?v=1784397767"},{"product_id":"jbl-stage3-968mf-6x9-3-way-car-speakers","title":"JBL Stage3 968MF 6x9\" 3-Way Car Speakers","description":"\u003cp\u003eThe JBL Stage3 968MF is a pair of 6x9-inch three-way car speakers designed to replace compatible factory-installed speakers. They provide a full-range upgrade path for vehicles with 6x9-inch speaker locations, pairing low-frequency output with dedicated high-frequency reproduction. This model is supplied without grilles for installations that reuse factory grilles or place the speakers behind factory panels.\u003c\/p\u003e\u003cp\u003eRated at 80 watts RMS and 640 watts peak power handling, the Stage3 968MF is suited to systems powered by a compatible head unit or external amplifier. Its 4-ohm nominal impedance is intended for standard car-audio speaker circuits. With 92 dB sensitivity measured at 2.83V, it is specified to produce useful output from a range of compatible sources.\u003c\/p\u003e\u003cp\u003eThe three-way design covers a published 40 Hz to 20 kHz frequency response. JBL uses a PEI balanced dome tweeter to reproduce high frequencies, while the larger woofer is engineered for bass and midrange duties. This arrangement is appropriate for listeners who want a single-speaker solution in a compatible 6x9-inch location.\u003c\/p\u003e\u003cp\u003eJBL's Plus One woofer architecture uses increased cone surface area compared with other woofers in its class. The laser-etched woofer cone is reinforced with 10% glass fiber, and its finish creates a forged-carbon-fiber-style visual effect. Together, these design elements support the speaker's focus on low-frequency output and visual integration.\u003c\/p\u003e\u003cp\u003eThe Stage3 968MF can be used as part of a factory-speaker replacement or a broader system refresh. Its true 4-ohm design is intended to account for resistance elsewhere in the vehicle audio system. Confirm vehicle mounting dimensions, connector requirements, panel clearance, and source-unit compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way 6x9-Inch Design:\u003c\/strong\u003e Combines woofer and high-frequency elements in a single speaker assembly for compatible 6x9-inch locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Uses increased woofer cone surface area to support sensitivity and low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a material selected for clear, controlled treble reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber-Reinforced Cone:\u003c\/strong\u003e The laser-etched woofer cone contains 10% glass fiber for a rigid, distinctive-looking diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Technology:\u003c\/strong\u003e A nominal 4-ohm load is designed for use with compatible car stereos and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment-Conscious Materials:\u003c\/strong\u003e Uses post-consumer recycled plastic, PVC-free wiring, and soy-ink packaging.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stage3 968MF uses a laser-etched, 10% glass-fiber-reinforced woofer cone, PEI balanced dome tweeter, and post-consumer recycled plastic components. JBL also specifies PVC-free wiring and packaging printed with soy-based inks. The speakers are supplied without grilles, which can suit installations behind existing vehicle trim or factory grilles.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle has a compatible 6x9-inch mounting location and sufficient clearance before purchase. The package includes two speakers, screws, spade clips, foam gaskets, logo badges, and a mini owner's manual; vehicle-specific adapters, wiring harnesses, and mounting brackets are not listed. Match the speakers to a compatible 4-ohm head unit or amplifier and use the included foam gaskets where appropriate for installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632140705862,"sku":"JBLSPKS3968MF","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61C8PIT431L.jpg?v=1784397812"},{"product_id":"jbl-jblspksd962cfam-6-x-9-component-speaker-system","title":"JBL JBLSPKSD962CFAM 6\" x 9\" Component Speaker System","description":"\u003cp\u003eThe JBL JBLSPKSD962CFAM is a 6\" x 9\" Stadium Series component speaker system designed for vehicle owners replacing factory speakers with a separate woofer, tweeter, and crossover arrangement. It provides a practical upgrade path for systems that need stronger output and more detailed high-frequency placement than a conventional full-range speaker. This no-grille version is intended for installations where the vehicle's factory grilles are retained.\u003c\/p\u003e\u003cp\u003eIts two-way component layout separates bass and midrange duties from high-frequency reproduction, allowing the tweeters to be mounted where they best suit the vehicle interior. The 6\" x 9\" woofers use JBL Plus One glass-fiber cones and rubber surrounds for a rigid, durable moving assembly. With a 35Hz to 40kHz frequency response and 94dB sensitivity at 2.83V, the system is specified for broad-range car-audio playback.\u003c\/p\u003e\u003cp\u003eThe included 3\/4\" edge-driven aluminum dome tweeters are engineered for extended high-frequency response up to 40kHz. Their external crossovers include a selectable 0dB or -3dB tweeter-output setting, helping installers adjust treble balance for the tweeter location and cabin acoustics. This is useful when tweeters are mounted close to listeners or in reflective areas of the vehicle.\u003c\/p\u003e\u003cp\u003eJBL rates the Stadium 962C platform at 145 watts RMS and 435 watts peak power handling per system, with a 3-ohm impedance. That combination makes it appropriate for a properly matched aftermarket amplifier or compatible speaker output stage. The included external crossovers manage signal distribution between the woofers and tweeters.\u003c\/p\u003e\u003cp\u003eThe system can also serve as the foundation for a future three-way Stadium installation. Its crossovers support two-way and three-way operation when paired with compatible optional JBL Stadium midrange speakers. Mounting accessories, spacers, foam gaskets, tweeter cups, and installation hardware are included, while grilles are not included with this SKU.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6\" x 9\" Component System:\u003c\/strong\u003e Separates woofer and tweeter placement for a more adaptable installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e145W RMS Power Handling:\u003c\/strong\u003e Supports higher-output systems with properly matched amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Glass-Fiber Woofers:\u003c\/strong\u003e Rigid, lightweight cones help reproduce bass and midrange information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\" Aluminum Dome Tweeters:\u003c\/strong\u003e Edge-driven tweeters extend high-frequency response to 40kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0dB or -3dB output to suit the installation location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Upgrade Support:\u003c\/strong\u003e Compatible crossover configuration supports an optional Stadium midrange upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stadium 962C design combines 6\" x 9\" Plus One glass-fiber woofers, hi-roll rubber surrounds, and separate 3\/4\" edge-driven aluminum dome tweeters. External crossovers provide dedicated woofer and tweeter connections and offer selectable tweeter-level adjustment. The package also includes multiple tweeter-mounting components for surface, flush, and starfish-style mounting approaches.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available speaker opening, panel clearance, and mounting depth before installation. The woofer top-mount depth is 3-3\/16\", and the cutout requirement is approximately 5.79\" x 8.66\"; spacers and foam gaskets are included for fitment assistance. Route the woofer and tweeter connections through the included crossovers, select the desired tweeter level, and retain or source grilles as needed because this SKU does not include them.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632154632262,"sku":"JBLSPKSD962CFAM","price":314.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71HET-680yL.jpg?v=1784397989"},{"product_id":"jbl-stadium-962m-6-x-9-3-way-car-speakers","title":"JBL Stadium 962M 6\" x 9\" 3-Way Car Speakers","description":"\u003cp\u003eThe JBL Stadium 962M is a pair of 6 x 9-inch, three-way car speakers designed for drivers replacing factory speakers or building a more capable aftermarket audio system. Its 3-ohm design and 94 dB sensitivity help it make effective use of power from compatible factory or aftermarket audio systems. The speakers are supplied as a pair and include grilles, spacers, mounting hardware, and foam gaskets.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want fuller bass response and greater high-frequency detail from a 6 x 9-inch location. JBL rates the Stadium 962M at 120 watts RMS and 360 watts peak power per speaker, with a 35 Hz to 40 kHz frequency response. That combination supports use in doors, rear decks, or other vehicle locations that accept the required 6 x 9-inch mounting dimensions.\u003c\/p\u003e\u003cp\u003eThe three-way coaxial layout combines a glass-fiber woofer with integrated midrange and tweeter elements. JBL's Plus One glass-fiber woofer technology extends the cone area toward the basket edge, while the rubber surround supports controlled cone movement. The edge-driven aluminum dome midrange and tweeter are designed to maintain detail at higher frequencies.\u003c\/p\u003e\u003cp\u003eA selectable 0 dB or -3 dB tweeter-output setting allows the upper-frequency level to be adjusted for the speaker's installation position. This can be useful when a speaker is mounted low in a door or in a more reflective location. The system's specified crossover point is 3.9 kHz.\u003c\/p\u003e\u003cp\u003eThe Stadium 962M can be powered by a compatible head unit, though its 120-watt RMS rating also makes it appropriate for an external amplifier matched to its power handling and 3-ohm impedance. Verify vehicle mounting clearance, cutout dimensions, and amplifier stability before installation. For a balanced upgrade, pair the speakers with suitable source equipment, wiring, and installation adapters where required by the vehicle.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, midrange, and tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Glass-Fiber Woofer:\u003c\/strong\u003e Uses a rigid, lightweight cone for defined low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Drivers:\u003c\/strong\u003e Edge-driven midrange and tweeter elements extend high-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or -3 dB output for installation tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Impedance:\u003c\/strong\u003e Helps compatible systems draw more usable amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Hardware:\u003c\/strong\u003e Grilles, spacers, gaskets, screws, and clips are supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Stadium 962M uses a black multi-element coaxial design with a Plus One glass-fiber woofer cone, rubber surround, and edge-driven aluminum dome midrange and tweeter elements. The speakers include protective grilles and foam gaskets, while the supplied spacers provide an additional fitment option. Each speaker has a 6 x 9-inch nominal size and a 3-way layout.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has sufficient space for the 9-15\/32 by 6-21\/32-inch cutout and 3-5\/32-inch top-mount depth before installation. Use the supplied screws, speed clips, foam gaskets, and spacers as appropriate for the mounting surface; vehicle-specific adapter brackets or harnesses may still be needed. Disconnect the vehicle battery before wiring, observe speaker polarity, and use an amplifier or receiver that is compatible with a 3-ohm speaker load.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632161939526,"sku":"JBLSPKSD962MAM","price":303.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61-MRo4CwfL.jpg?v=1784398039"},{"product_id":"jbl-stage3-9637-stage39637am-6-x-9-three-way-speakers","title":"JBL Stage3 9637 (STAGE39637AM) 6\" x 9\" Three-Way Speakers","description":"\u003cp\u003eThe JBL Stage3 9637 is a pair of 6\" x 9\" three-way car speakers designed for replacing compatible factory-installed speakers. They provide a practical upgrade path for drivers seeking fuller, more detailed sound from a factory head unit or an aftermarket amplified system. The pair includes grilles and basic mounting hardware for installations where the vehicle does not already provide a suitable speaker grille.\u003c\/p\u003e\u003cp\u003eWith a 75-watt RMS power rating per speaker and 93 dB sensitivity measured at 2.83V\/1m, these speakers are suited to systems that need efficient output without requiring extreme amplifier power. Their 50 Hz to 20 kHz frequency response is intended to cover low, midrange, and high-frequency content through the integrated three-way design. The nominal 3-ohm impedance is designed to draw effectively from compatible car-audio amplifiers or head units.\u003c\/p\u003e\u003cp\u003eJBL uses Plus One™ polypropylene woofer cones, which move the surround attachment outward to increase usable cone area. This design is intended to improve efficiency and help the woofer produce stronger output in a factory-speaker replacement application. The larger cone area also supports the low-frequency foundation expected from the 6\" x 9\" format.\u003c\/p\u003e\u003cp\u003eAn edge-driven dome tweeter is incorporated to provide broad, smooth high-frequency response. Combined with the three-way arrangement and a specified 5 kHz crossover point, the speaker is built to distribute musical detail across its integrated drivers. This makes the Stage3 9637 suitable for listeners who want a single coaxial speaker assembly rather than a separate-component installation.\u003c\/p\u003e\u003cp\u003eThe Stage3 9637 is engineered around common vehicle speaker locations, but physical fitment should always be confirmed before purchase. Its supplied grilles can be useful for custom rear-deck, enclosure, or other exposed-mount applications, while many factory locations use their existing interior trim instead. For a complete system upgrade, pair the speakers with a source unit or amplifier that is stable with a 3-ohm speaker load.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Speaker Design:\u003c\/strong\u003e Integrates multiple drivers in each 6\" x 9\" speaker for broad frequency coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One™ Woofer Cones:\u003c\/strong\u003e Polypropylene cones provide increased cone area for efficient output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Dome Tweeters:\u003c\/strong\u003e Designed for broad and smooth high-frequency response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power Handling:\u003c\/strong\u003e Supports compatible factory-upgrade and amplified car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Helps compatible source units and amplifiers deliver usable output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket Frame:\u003c\/strong\u003e Helps manage voice-coil heat during sustained playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThese speakers use Plus One™ polypropylene woofer cones and a vented basket-frame design. The vented basket is designed to help cool the voice coil, while the oval 6\" x 9\" frame supports placement in compatible factory or custom speaker locations. Each speaker also includes an integrated dome tweeter assembly as part of its three-way configuration.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 6\" x 9\" opening, mounting depth, mounting-hole pattern, and clearance behind the panel before installation. The package includes two speakers, two grilles, eight screws, and eight speed clips; vehicle-specific wiring adapters, mounting brackets, sealing materials, and tools may be needed depending on the application. Observe correct positive and negative speaker polarity and verify that the connected radio or amplifier supports a 3-ohm load.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632458260550,"sku":"STAGE39637AM","price":133.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Cm2vKOOlL.jpg?v=1784400296"},{"product_id":"jvc-cs-dr6931-6x9-3-way-coaxial-car-speakers","title":"JVC CS-DR6931 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe JVC CS-DR6931 is a pair of 6 x 9-inch, 3-way coaxial car speakers designed to replace factory-installed speakers with a direct-fit style upgrade. Their shallow-profile design and low-height tweeter assembly help address clearance concerns that can arise behind factory grilles and interior panels. They are a practical choice for drivers seeking clearer, fuller sound from a factory radio or a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 70 watts RMS at 4 ohms, with 500 watts peak power handling. The 58 Hz to 21 kHz frequency response covers bass, midrange, and treble content for a broad full-range presentation. With 88 dB sensitivity, the pair can work with many standard car-audio systems while also leaving room for amplification in an upgraded system.\u003c\/p\u003e\u003cp\u003eThe CS-DR6931 uses a carbon mica woofer cone intended to balance low moving mass with rigidity. This construction helps the woofer respond to musical detail while maintaining a controlled foundation for lower frequencies. A hybrid rubber-and-cloth surround supports cone movement and is designed for the demands of an automotive environment.\u003c\/p\u003e\u003cp\u003eA 2-5\/8-inch PEI cone midrange and 19\/32-inch PEI dome tweeter handle upper-frequency duties within the coaxial assembly. This 3-way layout places multiple drivers in each 6 x 9-inch location, making it suitable where separate component-speaker installation is not preferred. The small tweeter cover is designed to minimize interference with the woofer cone.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a straightforward pair replacement or as part of a larger car-audio refresh with an aftermarket receiver, amplifier, and subwoofer. Their 3-1\/8-inch mounting depth should be checked against available vehicle depth before installation. Grilles, speaker wire leads, mounting screws, and speed clips are included for installation flexibility.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch 3-Way Design:\u003c\/strong\u003e Combines woofer, midrange, and tweeter drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Power Handling:\u003c\/strong\u003e Supports appropriately matched factory radios or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Mica Woofer Cone:\u003c\/strong\u003e Provides a lightweight, rigid diaphragm for responsive sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Woofer Surround:\u003c\/strong\u003e Rubber-coated cloth supports efficient cone movement and durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Midrange And Tweeter:\u003c\/strong\u003e Handles midrange and high-frequency detail within the coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Tweeter Assembly:\u003c\/strong\u003e Helps improve fitment behind many factory speaker grilles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS-DR6931 pairs a ferrite-magnet carbon mica woofer with a hybrid rubber-and-cloth surround. Its 2-5\/8-inch cone midrange uses a ferrite magnet, while the 19\/32-inch dome tweeter uses a Poly-Ether Imide diaphragm. The included grilles provide added driver protection when the factory installation does not retain an existing grille.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's 6 x 9-inch opening, mounting depth, cutout dimensions, and panel clearance before purchase. The speakers use a 4-ohm load and should be connected with correct positive and negative polarity; vehicle-specific speaker adapters or mounting brackets may be needed depending on the vehicle. For amplified systems, match the amplifier's RMS output per channel to the speaker's 70-watt RMS rating and use appropriate gain adjustment.\u003c\/p\u003e","brand":"JVC","offers":[{"title":"Default Title","offer_id":45632539394118,"sku":"CS-DR6931","price":111.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/818zUkBQdKL.jpg?v=1784400796"},{"product_id":"kenwood-kfc-6966s-6x9-inch-3-way-coaxial-speakers","title":"Kenwood KFC-6966S 6x9-Inch 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Kenwood KFC-6966S is a pair of 6x9-inch 3-way coaxial car speakers for upgrading compatible factory speaker locations. It is designed for drivers who want a straightforward replacement speaker with full-range output from a single mounting position. The 4-ohm design suits many conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 45 watts RMS input power and 400 watts peak input power. With a 91 dB sensitivity rating and a stated 35 Hz to 20 kHz frequency response, the KFC-6966S is built to provide clear everyday playback across bass, midrange, and high-frequency content. Power matching with the vehicle's head unit or an appropriately rated amplifier is important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe 3-way coaxial layout combines a 6x9-inch polypropylene woofer, a 2-inch cone tweeter, and a 1\/2-inch ceramic super tweeter in each speaker assembly. This arrangement places multiple drivers in the same location, helping simplify an upgrade where separate component speakers are not required. The polypropylene woofer cone is paired with a cloth surround for durable speaker movement.\u003c\/p\u003e\u003cp\u003eKenwood uses a ferrite woofer magnet and describes an enlarged magnet circuit to support clear sound. The speaker's Sound Field Enhancer design is intended to support sound quality within the constraints of an in-vehicle installation. Its low 7\/16-inch tweeter height helps it fit beneath more factory grilles and interior panels where clearance permits.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a replacement pair in compatible rear decks, doors, or other 6x9-inch mounting locations. Confirm the vehicle's opening, mounting depth, grille clearance, and wiring connection before installation. The package includes grilles, mounting hardware, speed nuts, and short speaker cords to support a basic installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, tweeter, and super tweeter drivers into each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e45W RMS Rating:\u003c\/strong\u003e Supports power matching with compatible car stereos or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Peak Input:\u003c\/strong\u003e Provides short-term peak power handling specification for each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Uses a lightweight PP diaphragm for the 6x9-inch woofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree High-Frequency Drivers:\u003c\/strong\u003e Includes a 2-inch cone tweeter and 1\/2-inch ceramic super tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Tweeter Profile:\u003c\/strong\u003e The 7\/16-inch tweeter height helps accommodate grille clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-6966S uses a silver polypropylene woofer diaphragm with a cloth surround, plus ferrite magnet structures for the woofer and tweeter sections. Each speaker measures 10-9\/16 inches wide by 7-5\/8 inches high with its grille installed. The integrated coaxial construction keeps all three driver sections in one 6x9-inch speaker assembly.\u003c\/p\u003e\u003cp\u003eVerify a 6-1\/16 by 8-3\/4-inch cutout, 3-inch mounting depth, and sufficient grille or trim clearance before purchase. Use the included tapping screws and speed nuts where appropriate, and connect the included 0.3-meter speaker cords or vehicle wiring with correct polarity. For amplified systems, select an amplifier channel that is compatible with each speaker's 4-ohm impedance and 45-watt RMS input rating.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633156972614,"sku":"KFC-6966S","price":90.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61C8QfbQZKL.jpg?v=1784405941"},{"product_id":"kenwood-kfc-6988rs-6-x-9-4-way-car-speakers","title":"Kenwood KFC-6988RS 6\" x 9\" 4-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-6988RS is a pair of 6 x 9-inch, 4-way full-range car speakers designed for replacing compatible factory speakers or building a higher-output vehicle audio system. They provide a broad frequency range with dedicated woofer, tweeter, and dual super-tweeter elements in each speaker assembly. This makes them a practical option for listeners who want clearer detail and fuller sound from a conventional 6 x 9-inch location.\u003c\/p\u003e\u003cp\u003eRated for 140 watts RMS and 670 watts peak power, the KFC-6988RS is suited to systems that need speakers with substantial power-handling capability. Its 4-ohm impedance supports use with many compatible car stereo and amplifier installations. With 88 dB sensitivity at 1 meter, it is engineered to produce useful output from appropriately matched power.\u003c\/p\u003e\u003cp\u003eThe 6 x 9-inch polypropylene woofer uses Kenwood's Diamond Array Pattern to help reduce distortion while reproducing midrange and bass content. A urethane surround supports the woofer assembly, while the steel basket provides a rigid mounting structure. Together, these elements are designed for reliable operation in a vehicle environment.\u003c\/p\u003e\u003cp\u003eA 1-3\/4-inch balanced-dome tweeter works with 20 mm and 12 mm ceramic super tweeters to extend high-frequency reproduction. Kenwood's Acoustic Sound Harmonizer manages woofer sound waves through the tweeter panel for a smoother response. The Sound Field Enhancer tweeter shape is designed to strengthen forward sound and widen the high-frequency sound field.\u003c\/p\u003e\u003cp\u003eThe KFC-6988RS can be used in compatible rear-deck, door, or other factory-style 6 x 9-inch speaker locations where depth and cutout requirements are met. Its low tweeter height helps support factory-location fitment, but vehicle-specific clearance should always be checked before installation. For a system upgrade, match the speakers with a properly configured 4-ohm head unit or amplifier and use clean, unclipped power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Power Handling:\u003c\/strong\u003e Supports higher-powered systems when paired with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Polypropylene Woofer:\u003c\/strong\u003e Delivers full-range output from a durable PP cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Pattern:\u003c\/strong\u003e Helps reduce distortion for more controlled woofer performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-Way Driver Design:\u003c\/strong\u003e Combines a woofer, dome tweeter, and two super tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Helps create a smoother, more natural sound response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Promotes stronger forward sound and wider high-frequency dispersion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-6988RS uses a black polypropylene woofer cone with Diamond Array Pattern, a urethane surround, and a steel basket. Its top plate and yoke are steel with a black finish, while the woofer and main tweeter use ferrite magnets. The speaker's low 1\/2-inch tweeter height is intended to aid fitment in many factory speaker locations.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle provides at least a 5-7\/8 x 8-5\/8-inch oval cutout and 3-3\/16 inches of mounting depth before installation. The included accessory set includes grilles, mounting hardware, speaker cords, and adhesive tape. Use the supplied template and hardware as appropriate, observe correct speaker polarity, and ensure the source unit or amplifier is compatible with a 4-ohm speaker load.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633157038150,"sku":"KFC-6988RS","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71mN8HztE1L.jpg?v=1784405978"},{"product_id":"kenwood-kfc-6998rs-6x9-inch-5-way-car-speakers","title":"Kenwood KFC-6998RS 6x9-Inch 5-Way Car Speakers","description":"\u003cp\u003eThe Kenwood KFC-6998RS is a pair of 6x9-inch 5-way car speakers designed to replace compatible factory-installed oval speakers. They provide a full-range upgrade path for vehicles whose original speakers have lost clarity, output, or bass definition. With a 4-ohm impedance and 150W RMS power rating, they can be matched with compatible factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eThese speakers use a polypropylene woofer cone with Kenwood's Diamond Array Pattern, paired with a urethane surround. This construction is intended to support controlled cone movement and reduce distortion during playback. The oval 6x9-inch format is well suited to common rear-deck, door, and factory speaker locations that accept this size.\u003c\/p\u003e\u003cp\u003eA 1-3\/4-inch balanced-dome tweeter works with a 4\/5-inch ceramic super tweeter and two 1\/2-inch ceramic super tweeters. The multi-driver design is built to reproduce upper-frequency detail alongside the woofer's midrange and lower-frequency output. Kenwood rates the KFC-6998RS for a frequency response of 58Hz to 22kHz.\u003c\/p\u003e\u003cp\u003eKenwood's Acoustic Sound Harmonizer manages woofer sound waves through the tweeter-panel openings to help produce a smoother, more natural response. The speakers also use a Sound Field Enhancer tweeter shape intended to strengthen forward sound and widen the high-frequency sound field. These features help make the speaker a practical choice for listeners seeking a more detailed presentation from a conventional full-range replacement speaker.\u003c\/p\u003e\u003cp\u003eFor installation, the KFC-6998RS has a 5-7\/8 by 8-5\/8-inch cutout requirement and a 3-3\/16-inch mounting depth. Its low 1\/2-inch tweeter height is designed to support fitment in many factory locations. Included grilles, hardware, speaker wire, and adhesive tape provide useful installation accessories, although vehicle-specific adapters or harnesses may still be needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5-Way Driver System:\u003c\/strong\u003e Combines a woofer, balanced-dome tweeter, and three super tweeters for broad full-range reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power:\u003c\/strong\u003e Handles substantial continuous power when paired with a properly matched compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond Array Woofer Cone:\u003c\/strong\u003e Polypropylene cone pattern helps reduce distortion and supports clear, controlled playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Sound Harmonizer:\u003c\/strong\u003e Controls woofer sound waves through the tweeter panel for smoother, more natural sound.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound Field Enhancer:\u003c\/strong\u003e Tweeter shape is designed for stronger forward sound and wider high-frequency dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFactory-Location Fit:\u003c\/strong\u003e Low tweeter height helps the speaker fit in many compatible factory mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-6998RS uses a black polypropylene woofer cone, urethane surround, steel basket, and black-painted steel top plate and yoke. Its magnetic circuit uses a ferrite woofer magnet, while the tweeter also uses a ferrite magnet. The black-painted yoke and plate are designed to release heat efficiently within the magnetic circuit and support voice-coil durability.\u003c\/p\u003e\u003cp\u003eConfirm available mounting depth, cutout dimensions, and vehicle-specific mounting provisions before purchase. Connect each speaker to a compatible 4-ohm speaker output and use an amplifier or head unit whose setup is appropriate for the speaker's published power rating. The supplied grille assemblies, tapping screws, washers, speaker cords, and adhesive tape can assist with installation, but vehicle-specific brackets or wiring adapters are not listed as included.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633157169222,"sku":"KFC-6998RS","price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71iV5oNJ_uL.jpg?v=1784406043"},{"product_id":"mb-quart-rk1-169-6x9-2-way-coaxial-speakers","title":"MB Quart RK1-169 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe MB Quart RK1-169 is a pair of 6x9-inch, 2-way coaxial car speakers designed to replace factory speakers or support a custom car-audio upgrade. Its coaxial layout combines the woofer and tweeter in each speaker, helping simplify installation where a 6x9-inch speaker location is available. With 4-ohm impedance, the pair is suited to many aftermarket and compatible factory-powered systems.\u003c\/p\u003e\u003cp\u003eThese Reference Series speakers use lightweight craft-pulp cones reinforced with bamboo fiber for midrange and bass reproduction. The curvilinear cone profile is intended to add rigidity while helping reduce unwanted cone flex. A butyl-rubber surround supports the woofer assembly during normal operation.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by 0.75-inch titanium dome tweeters with MB Quart WideSphere technology. This tweeter design is intended to improve off-axis dispersion, which can be useful in vehicle locations where speakers are not aimed directly at listeners. The result is a full-range coaxial design that covers both low and high frequency duties from one mounting position.\u003c\/p\u003e\u003cp\u003eThe RK1-169 is rated for 50 watts RMS and 100 watts peak power per speaker, or 100 watts RMS and 200 watts peak power for the pair. Its 85.5 dB sensitivity and 4-ohm impedance should be considered when matching it with a head unit or external amplifier. Use clean power within the stated RMS rating for appropriate power matching.\u003c\/p\u003e\u003cp\u003eFor a complete system upgrade, these speakers can be used in front or rear 6x9-inch locations where vehicle fitment and clearance permit. The built-in 2-way crossover routes frequencies between the woofer and tweeter without requiring an external passive crossover. Grilles are included for installations where the speakers will be visible or mounted in a custom location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker for a straightforward full-range upgrade.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50-Watt RMS Per Speaker:\u003c\/strong\u003e Supports amplifier or receiver matching within the stated continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.75-Inch Titanium Tweeters:\u003c\/strong\u003e Reproduce high frequencies with a dome-tweeter design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideSphere Technology:\u003c\/strong\u003e Promotes broader off-axis high-frequency dispersion inside a vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePulp\/Bamboo Fiber Cone:\u003c\/strong\u003e Uses a lightweight cone material for bass and midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 2-Way Crossover:\u003c\/strong\u003e Directs frequency ranges to the woofer and tweeter within each speaker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RK1-169 uses a craft-pulp and bamboo-fiber woofer cone with a butyl-rubber surround, a Kapton voice-coil former, and a red woven fiber cotton\/poly-blend spider. Its PA66 composite basket is reinforced with 30% glass fiber. Molded polymer sealing gaskets and high-temperature adhesives are also part of the speaker construction.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific fitment before purchase, including the 8.715 x 5.838-inch cutout requirement and approximately 2 15\/16-inch top-mount depth. Observe positive and negative terminal polarity, secure wiring away from moving parts, and verify window or panel clearance before final mounting. The package includes grilles, mounting screws, speed clips, a template, and installation documentation; vehicle-specific harness adapters are not listed.\u003c\/p\u003e","brand":"MB Quart","offers":[{"title":"Default Title","offer_id":45633163886662,"sku":"RK1-169","price":167.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/715LOulp0aL.jpg?v=1784407589"},{"product_id":"mb-quart-xk2-169-6x9-2-way-coaxial-speakers","title":"MB Quart XK2-169 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe MB Quart XK2-169 is a pair of 6x9-inch, 2-way coaxial car speakers intended for upgrading compatible factory or aftermarket vehicle speaker locations. It combines the woofer and high-frequency drivers into each speaker assembly, providing a space-efficient full-range replacement option. The published 150-watt RMS and 300-watt peak power ratings apply per pair.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to listeners who want to replace worn factory 6x9-inch speakers or build a straightforward aftermarket system around a compatible head unit or external amplifier. Their 88 dB sensitivity and published 55 Hz-22 kHz frequency response describe their operating range and efficiency rating. Vehicle fitment should always be confirmed against the available mounting opening and depth before purchase.\u003c\/p\u003e\u003cp\u003eThe XK2-169 is specified as a 2-way coaxial system, placing multiple drivers within the same 6x9-inch speaker footprint. This format can simplify an upgrade where separate tweeter locations or external crossover mounting are not desired. It is designed for use in automotive audio applications.\u003c\/p\u003e\u003cp\u003ePublished crossover information lists 12 dB slopes at 1 kHz and 3 kHz. This crossover design is intended to divide frequency reproduction among the drivers in the coaxial assembly. Pairing the speakers with properly matched amplification and clean source signal is important for practical system setup.\u003c\/p\u003e\u003cp\u003eFor installation planning, the published cutout requirement is 8.64 by 5.98 inches, with a mounting depth of 3.35 inches measured from the flange. These measurements are useful starting points, but door panels, rear decks, grilles, adapters, and window mechanisms can vary by vehicle. Confirm clearance, mounting-hole alignment, and wiring polarity before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Format:\u003c\/strong\u003e Fits compatible 6x9-inch automotive speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker System:\u003c\/strong\u003e Integrates low- and high-frequency drivers in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Per Pair:\u003c\/strong\u003e Supports systems matched to its published continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Peak Per Pair:\u003c\/strong\u003e Provides the published short-duration peak handling figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 Hz-22 kHz Response:\u003c\/strong\u003e Covers a published range from bass through treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 dB Crossover Slopes:\u003c\/strong\u003e Published at 1 kHz and 3 kHz.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XK2-169 uses a coaxial speaker layout in a nominal 6x9-inch frame. MB Quart describes the speakers as constructed with high-quality materials, though specific cone, surround, voice-coil, and magnet materials are not publicly confirmed for this exact model. The integrated-driver design is intended to keep the installation concentrated in a single speaker opening.\u003c\/p\u003e\u003cp\u003eCheck that the vehicle supports a 6x9-inch replacement speaker and verify the published 8.64 by 5.98 inch cutout and 3.35 inch flange-depth requirement against the actual location. Use appropriate vehicle-specific brackets, wiring adapters, and fasteners where required; these items are not confirmed as included. Match the source or amplifier output appropriately to the speaker system and observe correct positive and negative terminal polarity during wiring.\u003c\/p\u003e","brand":"MB Quart","offers":[{"title":"Default Title","offer_id":45633167523910,"sku":"XK2-169","price":78.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71N12pJBq3L.jpg?v=1784408083"},{"product_id":"memphis-mjp69-6x9-mojo-pro-neo-midrange-speaker","title":"Memphis MJP69 6x9\" MOJO Pro Neo Midrange Speaker","description":"\u003cp\u003eThe Memphis MJP69 is a 6x9-inch MOJO Pro midrange speaker designed for high-output vehicle and powersports audio systems. Sold individually, it provides a direct building block for custom speaker layouts in cars, motorcycles, side-by-sides, and similar applications. Its 4-ohm load and 200-watt RMS power rating make it suited to a properly matched aftermarket amplifier channel.\u003c\/p\u003e\u003cp\u003eThis is a one-way pro-audio-style midrange driver rather than a full component set. It is intended to reproduce the upper-bass and midrange region with strong output, making it a practical choice when a system needs more presence and projection than factory speakers can provide. For a complete frequency range, pair it with appropriate tweeters, bass reinforcement, and crossover or DSP tuning as required by the system design.\u003c\/p\u003e\u003cp\u003eThe MJP69 uses a high-efficiency design rated at 102 dB sensitivity. That sensitivity helps it produce substantial output from available amplifier power while its 200-watt RMS and 400-watt peak ratings support amplified applications. Its published frequency response is 98 Hz to 20 kHz, though final performance depends on placement, installation, crossover settings, and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eA low-profile neodymium magnet helps reduce rear mounting bulk and weight compared with larger conventional magnet structures. The speaker also uses a cast basket for structural support, an accordion cloth surround, and an aluminum dustcap. These materials support a durable pro-audio-oriented construction for demanding mobile installations.\u003c\/p\u003e\u003cp\u003eThe treated cone is water resistant for installations exposed to limited moisture, such as motorcycle fairings and side-by-side speaker locations. A mesh grille is included to help protect the driver in exposed mounting positions. With its 6x9-inch format and 2.79-inch mounting depth, the MJP69 is best used after confirming available clearance and mounting-hole alignment in the intended location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e200-Watt RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched amplified channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e102 dB Sensitivity:\u003c\/strong\u003e Helps deliver high output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Resistant Treated Cone:\u003c\/strong\u003e Suits installations with limited moisture exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Magnet:\u003c\/strong\u003e Reduces magnet size and rear mounting bulk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccordion Cloth Surround:\u003c\/strong\u003e Supports controlled cone movement in a durable design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMesh Grille Included:\u003c\/strong\u003e Adds driver protection for exposed speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MJP69 combines a treated water-resistant cone, accordion cloth surround, aluminum dustcap, cast basket, and low-profile neodymium magnet. Its 6x9-inch oval frame is configured as a single one-way midrange speaker with a 4-ohm nominal impedance. A mesh grille is included for added protection.\u003c\/p\u003e\u003cp\u003eConfirm that the installation location has sufficient clearance for the 2.79-inch mounting depth and 8.94 x 6.14-inch mounting-hole pattern. Use an amplifier channel compatible with a 4-ohm speaker and set gain conservatively for the 200-watt RMS rating. Because this is sold individually, purchase the needed quantity for the planned system and add compatible tweeters, crossover networks, or DSP where the system design calls for them.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633182433350,"sku":"MJP69","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81dIirisiiL.jpg?v=1784410292"},{"product_id":"memphis-ms69-6x9-convertible-car-speaker-set","title":"Memphis MS69 6x9\" Convertible Car Speaker Set","description":"\u003cp\u003eThe Memphis MS69 is a 6x9-inch MSeries convertible car speaker set designed for vehicle owners who want an upgrade path beyond a fixed coaxial speaker layout. Its removable, multi-mount tweeter allows the system to be used in a conventional coaxial configuration or arranged as a component-style installation. This flexibility helps accommodate vehicles with limited factory speaker locations as well as custom door, dash, or panel installations.\u003c\/p\u003e\u003cp\u003eWith a 75-watt RMS and 150-watt peak power rating, the MS69 is suited to systems using an aftermarket head unit or a properly matched external amplifier. Its 91 dB sensitivity supports efficient output from available power. The speaker is intended for listeners seeking accurate, full-range reproduction from a 6x9-inch format.\u003c\/p\u003e\u003cp\u003eA carbon fiber cone forms the foundation of the woofer design, combining low moving mass with a durable construction. The rubber surround is designed to support controlled cone movement over time. Together, these materials support a clear, composed presentation through the speaker's operating range.\u003c\/p\u003e\u003cp\u003eThe center-mounted tweeter can swivel when the MS69 is configured as a coaxial speaker, allowing its output to be aimed more effectively toward the listening area. For a component-style layout, the tweeter can be removed and a phase plug installed in its place. This gives installers more freedom to position high frequencies where they work best in the vehicle.\u003c\/p\u003e\u003cp\u003eExternal passive crossovers divide the signal between the woofer and tweeter, while the MClip mounting solution provides a practical way to secure a crossover near the speaker or elsewhere in the installation. The crossover includes a selectable 0 dB or -3 dB tweeter setting for basic high-frequency level adjustment. A grille is included for installations where added driver protection or a finished appearance is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Speaker Design:\u003c\/strong\u003e Supports coaxial or component-style system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-Mount Tweeter:\u003c\/strong\u003e Allows flexible tweeter placement for custom installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel Tweeter:\u003c\/strong\u003e Helps aim highs in coaxial speaker installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Cone:\u003c\/strong\u003e Provides a lightweight, durable woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Direct frequencies to the appropriate speaker drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMClip Crossover Mounting:\u003c\/strong\u003e Provides a removable crossover mounting method.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MS69 uses a 6x9-inch carbon fiber woofer cone, rubber surround, removable tweeter assembly, external passive crossover network, and 13-ounce magnet. Its included grille can be used where the speaker is not fully protected by a factory panel or grille. The design supports either a center-mounted coaxial tweeter arrangement or a separated component-style layout.\u003c\/p\u003e\u003cp\u003eBefore purchase, confirm that the vehicle accepts a 6x9-inch speaker and provides at least 3 inches of mounting depth. In coaxial use, the tweeter remains mounted at the center of the woofer and can be aimed; in component use, remove the tweeter, install the phase plug, and mount the tweeter separately. Connect the external crossover between the amplifier or radio output and the woofer\/tweeter, then use the MClip system or another secure location for crossover mounting.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633187610694,"sku":"MS69","price":266.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_98bce7b5-bce8-4c60-91a2-f92a3627270f.jpg?v=1784411612"},{"product_id":"memphis-ms69mv-6x9-convertible-midwoofer","title":"Memphis MS69MV 6x9\" Convertible Midwoofer","description":"\u003cp\u003eThe Memphis MS69MV is a 6x9-inch convertible midwoofer designed for vehicle audio systems that need stronger midrange and mid-bass coverage than a basic factory speaker can provide. It is rated for 75 watts RMS and 150 watts peak power, making it suitable for use with compatible aftermarket amplification. Its 4-ohm design and 91 dB sensitivity support integration into many conventional car-audio speaker systems.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners building a staged component system rather than a conventional full-range 6x9 coaxial setup. The MS69MV uses a center-mounted black phase plug in place of an integrated tweeter. That arrangement is designed to reduce distortion and support high-frequency response from the midwoofer.\u003c\/p\u003e\u003cp\u003eA carbon fiber cone provides a lightweight, rigid diaphragm for controlled output, while the rubber surround supports cone movement and long-term durability. The published frequency response is 55 Hz to 7 kHz, placing this driver in a role focused on bass, mid-bass, and midrange reproduction. A compatible tweeter is needed to complete the upper-frequency portion of a component system.\u003c\/p\u003e\u003cp\u003eExternal passive crossovers are part of the MS69MV system architecture, allowing the signal to be divided between the woofer and optional tweeter configuration. The crossover uses a 12 dB slope and is supported by Memphis Audio's MClip mounting solution. This helps keep the crossover mounted near the rear of the woofer rather than loose inside a door or panel.\u003c\/p\u003e\u003cp\u003eThe MS69MV can be used as the foundation for a two-way setup with a compatible Memphis MSA1V 1-inch tweeter. It can also be part of a three-way system when paired with the MSA1V tweeter and MS25 2.5-inch midrange. Its 3-inch mounting depth and 5.906 by 8.74-inch mounting-template dimensions should be checked against the available space in the intended vehicle location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Midwoofer:\u003c\/strong\u003e Adds dedicated mid-bass and midrange coverage to a component audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Power:\u003c\/strong\u003e Handles up to 75 watts RMS per speaker with compatible amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Cone:\u003c\/strong\u003e Uses a lightweight, rigid cone material for controlled speaker operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack Phase Plug:\u003c\/strong\u003e Helps reduce distortion and support upper-frequency response from the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal 12 dB Crossover:\u003c\/strong\u003e Divides frequencies for use in a compatible component-system configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMClip Mounting System:\u003c\/strong\u003e Provides a removable mounting method for the external crossover.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MS69MV combines a carbon fiber cone, center-mounted black phase plug, rubber surround, and 13-ounce magnet. A protective grille is listed for this model. Its design is intended for a convertible component-system layout, with external crossover hardware instead of an integrated coaxial tweeter.\u003c\/p\u003e\u003cp\u003eConfirm that the selected location has at least 3 inches of mounting depth and accommodates the 5.906 by 8.74-inch mounting template before installation. Connect the amplifier output to the crossover input, then connect the crossover woofer output to the woofer terminals while observing polarity. For a two-way system, add a compatible MSA1V tweeter; adding an MS25 midrange creates a three-way system path.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633187643462,"sku":"MS69MV","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81gV3u3_t1L.jpg?v=1784411673"},{"product_id":"memphis-ms69v-6x9-convertible-car-speaker-set","title":"Memphis MS69V 6x9\" Convertible Car Speaker Set","description":"\u003cp\u003eThe Memphis MS69V is a 6x9-inch convertible car speaker set designed for factory-speaker upgrades and custom audio installations. It can operate as a conventional coaxial speaker set or be reconfigured for component-style placement with the optional MSCKIT. This flexibility helps installers adapt the speaker layout to available vehicle mounting locations.\u003c\/p\u003e\u003cp\u003eThis set is intended for drivers who want a 6x9-inch replacement speaker with more installation options than a fixed coaxial design. Its 75-watt RMS power rating per speaker supports use with compatible aftermarket amplification or an appropriately matched audio system. A 91 dB sensitivity rating helps it deliver useful output without requiring excessive power.\u003c\/p\u003e\u003cp\u003eThe MS69V combines carbon fiber cones with aluminum tweeters to cover bass, midrange, and high-frequency duties in a compact vehicle-speaker format. The carbon fiber cone construction is intended to provide a lightweight, responsive moving surface. Aluminum tweeters handle upper-frequency detail, while the rubber surrounds support controlled cone movement.\u003c\/p\u003e\u003cp\u003eIts removable coaxial tweeters are the defining feature of the MS69V design. With the separately sold Memphis MSCKIT, the tweeters can be relocated for component-style installation using supplied phase plugs and surface- or flush-mount options. This provides a path for changing tweeter position when system layout and imaging are priorities.\u003c\/p\u003e\u003cp\u003eExternal passive crossovers are included to manage the speaker system's frequency distribution. Memphis also includes its MClip crossover mounting solution to assist with crossover placement during installation. The included grilles add protection where the speakers are installed in exposed locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConvertible Speaker Design:\u003c\/strong\u003e Operates as a coaxial set or converts to a component-style layout with the optional MSCKIT.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon Fiber Cones:\u003c\/strong\u003e Lightweight cone material supports responsive midrange and low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Tweeters:\u003c\/strong\u003e Aluminum tweeters provide dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Passive Crossovers:\u003c\/strong\u003e Included crossovers divide frequencies between the cone drivers and tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMClip Crossover Mounting:\u003c\/strong\u003e Memphis MClip hardware helps secure the crossover during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surrounds:\u003c\/strong\u003e Rubber surrounds support cone movement and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MS69V uses a 6x9-inch carbon fiber cone, rubber surround, aluminum tweeter, and 13-ounce magnet. Its 3-inch mounting depth should be checked against available door, rear-deck, or other vehicle-panel clearance before purchase. Protective grilles are included with the set.\u003c\/p\u003e\u003cp\u003eFor standard coaxial use, install the speakers in a compatible 6x9-inch location and wire the included passive crossovers as directed by the manufacturer. Component conversion requires the separately sold MSCKIT; that kit provides phase plugs and mounting provisions for surface- or flush-mounted tweeters. Confirm vehicle fitment, mounting depth, wiring polarity, and amplifier power compatibility before installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633187676230,"sku":"MS69V","price":259.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81C00NQYeRL.jpg?v=1784411739"},{"product_id":"memphis-mxa69l-6-x-9-marine-coaxial-speakers-with-rgb-leds","title":"Memphis MXA69L 6\" x 9\" Marine Coaxial Speakers with RGB LEDs","description":"\u003cp\u003eThe Memphis MXA69L is a 6 x 9-inch marine-grade coaxial speaker set built for boats, side-by-sides, and other powersports installations. It provides an upgrade path for systems that need full-range sound in open, exposed environments. Integrated RGB LED lighting adds visual customization for evening rides and on-water use.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 120 watts peak power handling, the MXA69L is suited to properly matched marine or powersports amplification. Its 89 dB sensitivity supports solid output from a compatible source or amplifier. The 6 x 9-inch format is a practical choice where a larger oval speaker opening is already available.\u003c\/p\u003e\u003cp\u003eAn injection-molded poly cone and butyl rubber surround form the main moving assembly. This material combination is designed for dependable operation in changing outdoor conditions. A swivel-mount aluminum tweeter helps direct high-frequency sound toward the listening area.\u003c\/p\u003e\u003cp\u003eThe MXA69L uses a high-temperature ABS composite basket with UV-coated, water- and element-resistant construction. That makes it appropriate for installations exposed to sunlight, moisture, and outdoor debris. Removable mesh grille inserts allow the appearance and protection level to be tailored to the application.\u003c\/p\u003e\u003cp\u003eBoth gunmetal and white grille options are included, making it easier to coordinate with a boat, UTV, or other vehicle without purchasing separate grille colors. The RGB LED-equipped grilles provide a lighting element alongside the audio upgrade. Use the MXA69L as part of a marine-grade system with compatible source, amplification, and lighting components.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 x 9-Inch Coaxial Design:\u003c\/strong\u003e Fits applications designed for oval 6 x 9-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Power Handling:\u003c\/strong\u003e Supports matching with appropriately rated amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LED Lighting:\u003c\/strong\u003e Adds customizable illumination to the speaker grilles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel Aluminum Tweeter:\u003c\/strong\u003e Helps aim high-frequency output toward listeners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Materials:\u003c\/strong\u003e UV-coated, water- and element-resistant construction suits outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Grille Finishes Included:\u003c\/strong\u003e White and gunmetal grilles simplify style matching.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MXA69L combines an injection-molded poly cone, butyl rubber surround, and high-temperature ABS composite basket. Its grille system uses a five-spoke design with removable mesh inserts. The supplied white and gunmetal grille options support different installation aesthetics.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 6 x 9-inch speaker and provides at least 3.27 inches of mounting depth before installation. Use the available MXA speaker cutout template and confirm clearance behind the panel before cutting or fastening. Match the speakers with compatible marine or powersports audio equipment and follow the vehicle and equipment instructions for wiring and RGB lighting setup.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633189609542,"sku":"MXA69L","price":249.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_da16d44e-6d50-4687-b377-8ca6809caa7c.jpg?v=1784412299"},{"product_id":"memphis-prx6902-6x9-2-way-coaxial-speakers","title":"Memphis PRX6902 6x9\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRX6902 is a pair of 6x9-inch, 2-way coaxial car speakers from the Power Reference series. It is designed to replace compatible factory speakers with a full-range speaker solution that combines a woofer and tweeter in each location. This makes it a practical option for vehicles that use 6x9-inch speaker positions and need an audio-system refresh.\u003c\/p\u003e\u003cp\u003eEach speaker handles up to 60 watts RMS and 120 watts peak at a 4-ohm impedance. With 90 dB sensitivity and a 55 Hz to 20 kHz frequency response, the PRX6902 is suited to factory-radio upgrades as well as modest aftermarket amplification. Its 2-way configuration covers bass, midrange, and treble from a single coaxial assembly.\u003c\/p\u003e\u003cp\u003eThe woofer uses a polypropylene cone with a polyurethane surround. This material combination is intended to provide controlled cone movement while supporting regular in-vehicle use. A PEI dome tweeter handles high-frequency reproduction and is mounted within the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eMemphis equips the PRX6902 with a pivot-mount, multi-direction tweeter system. The tweeter can be aimed to help tailor high-frequency direction for the installation location. An integrated 6 dB tweeter crossover is also specified to manage the transition to the tweeter.\u003c\/p\u003e\u003cp\u003eThese speakers fit naturally into a straightforward front- or rear-speaker replacement plan, and they can also be used as part of a larger system with a separate subwoofer for deeper bass. Verify available mounting depth, mounting-hole pattern, and vehicle-specific adapter needs before installation. The pair includes protective grilles and installation hardware for applications where those parts are needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports continuous power up to 60 watts each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces high frequencies through a dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivot Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted after mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides the woofer diaphragm material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6902 uses a black Power Reference design with a polypropylene woofer cone, polyurethane surround, PEI dome tweeter, and 14-ounce magnet. Each speaker is a 4-ohm, 2-way coaxial unit with a specified 3-inch mounting depth. Protective grilles are included, and retailer package documentation identifies black steel-mesh grilles with plastic frames.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and has adequate depth behind the mounting surface before ordering. The package is listed with two speakers, two 12-inch speaker leads, two grilles, eight 1-3\/8-inch screws, and eight speed clips. Use vehicle-specific mounting adapters or wiring harnesses when the factory opening or connector differs from the included hardware.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633197211718,"sku":"PRX6902","price":139.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81wLgswXRPL.jpg?v=1784414019"},{"product_id":"memphis-prx6903-6x9-3-way-coaxial-car-speakers","title":"Memphis PRX6903 6x9\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Memphis PRX6903 is a pair of 6x9-inch, 3-way coaxial car speakers designed as a direct-size audio upgrade for compatible factory speaker locations. It combines woofer, midrange, and tweeter elements into each speaker to provide full-range playback from a single mounting position. This makes it a practical option for replacing worn or limited factory 6x9 speakers.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 120 watts peak power handling per speaker, the PRX6903 is suited to systems that need a moderate-power full-range speaker. Its 90 dB sensitivity supports efficient operation in a variety of car-audio installations. The 4-ohm design is compatible with common aftermarket speaker outputs.\u003c\/p\u003e\u003cp\u003eThe 3-way coaxial layout is intended to bring midrange and high-frequency detail into the same location as the 6x9 woofer. A PEI dome tweeter handles the upper frequencies, while the multi-direction pivot tweeter system allows the tweeter angle to be adjusted for the installation. This can help direct high-frequency sound toward the listening area where space permits.\u003c\/p\u003e\u003cp\u003eMemphis uses a polyurethane surround and stealthy black-on-black M-Cone design for the PRX6903. The surround supports cone movement while contributing to the speaker's durable construction. Its integrated appearance suits installations where the speaker may be visible behind a grille or rear deck opening.\u003c\/p\u003e\u003cp\u003eThe PRX6903 fits into a system upgrade path for vehicles that use 6x9-inch speakers and have sufficient mounting clearance. It can be used as a replacement pair or matched with other compatible full-range speakers in a larger system. Grilles, speaker leads, mounting hardware, and a user manual are included for installation flexibility.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6x9-Inch Size:\u003c\/strong\u003e Fits compatible 6x9-inch factory or custom speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines woofer, midrange, and tweeter elements in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports 60 watts RMS and 120 watts peak per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction within the coaxial assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePivoting Tweeter System:\u003c\/strong\u003e Allows tweeter direction to be adjusted during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Adds protection and installation flexibility where speakers are exposed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX6903 uses a polyurethane surround, PEI dome tweeter, and black-on-black M-Cone design. Each speaker has a 14-ounce magnet and a 3-inch mounting depth. The pair is supplied with two grilles for installations that require visible speaker protection.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6x9-inch speaker and provides at least 3 inches of mounting depth before installation. Match the speakers to a compatible 4-ohm source or amplifier and avoid exceeding their 60-watt RMS rating per speaker. The package includes two 12-inch speaker leads, eight screws, eight speed clips, and a user manual; vehicle-specific mounting adapters or wiring interfaces may still be needed depending on the vehicle.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633197375558,"sku":"PRX6903","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81BQIsBDF9L.jpg?v=1784414063"},{"product_id":"memphis-prx69s-6x9-shallow-2-way-car-speakers","title":"Memphis PRX69S 6x9\" Shallow 2-Way Car Speakers","description":"\u003cp\u003eThe Memphis PRX69S is a pair of shallow-mount 6x9-inch, 2-way car speakers designed for vehicles with limited speaker-depth clearance. Its slim basket and low-profile tweeter help address common fitment challenges in factory door and rear-deck locations. The speakers use a 2-ohm nominal impedance and are intended for vehicle audio systems that support that load.\u003c\/p\u003e\u003cp\u003eThese speakers are a practical option for replacing factory 6x9-inch speakers where a conventional full-depth aftermarket speaker may not fit. Memphis specifically identifies shallow factory locations common in Dodge, Chrysler, Toyota, and similar vehicles as intended applications. Vehicle-specific fitment should still be verified before installation.\u003c\/p\u003e\u003cp\u003eThe PRX69S is rated for 60 watts RMS and 120 watts peak power handling, with an 88 dB sensitivity rating. Its published frequency response is 60 Hz to 20 kHz, covering bass, midrange, and treble content for a full-range speaker location. A polypropylene woofer cone with rubber surround is paired with a PEI dome tweeter.\u003c\/p\u003e\u003cp\u003eA key part of the shallow design is the updated low-profile tweeter, which sits below the woofer surround. This arrangement is intended to provide additional clearance beneath many factory speaker grilles. The speaker also uses a built-in 6 dB Mylar crossover to direct high-frequency content to the tweeter.\u003c\/p\u003e\u003cp\u003eThe PRX69S can be used as a factory-speaker replacement or as part of a larger amplified audio upgrade. Its 2-ohm impedance may allow compatible factory or aftermarket equipment to deliver more power than with a 4-ohm speaker, but amplifier and radio compatibility should be confirmed. Protective grilles and installation hardware are included for custom installations where factory grilles are not retained.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Basket:\u003c\/strong\u003e Uses a 2.29-inch mounting depth for restricted locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Tweeter:\u003c\/strong\u003e Sits below the surround for improved grille clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Impedance:\u003c\/strong\u003e Designed for systems compatible with 2-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports moderate-power factory or aftermarket system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a woofer and center-mounted dome tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Grilles:\u003c\/strong\u003e Provides protection and a finished appearance for custom installs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRX69S uses a polypropylene woofer cone, rubber surround, PEI dome tweeter, and an 11-ounce magnet. Its low-profile tweeter is integrated into the speaker assembly rather than requiring a separate tweeter mount. Included grilles use black steel mesh with plastic frames.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting depth, cutout dimensions, mounting-hole pattern, and clearance behind the factory grille before purchasing. The speaker has a 2.29-inch published mounting depth, while top- and bottom-mount measurements may differ according to the mounting method. Verify that the factory radio or amplifier is stable with 2-ohm speakers, and use the included leads, screws, speed clips, and template as appropriate for the installation.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633197408326,"sku":"PRX69S","price":149.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81LPUU9g2nL.jpg?v=1784414110"}],"url":"https:\/\/audiowatt.store\/collections\/6x9-inch-speakers.oembed?page=3","provider":"Audio Watt Store","version":"1.0","type":"link"}