{"title":"6.5 Inch Speakers","description":null,"products":[{"product_id":"audio360-ad6510p-6-5-4-way-coaxial-car-speakers","title":"Audio360 AD6510P 6.5\" 4-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Audio360 AD6510P is a 6.5-inch 4-way coaxial car speaker designed for vehicle audio upgrades where space and straightforward fitment matter. Its compact format is suited to many door-panel, rear-deck, and custom speaker locations that accept a 6.5-inch driver. It is intended for listeners who want to replace factory speakers or build out an aftermarket sound system.\u003c\/p\u003e\u003cp\u003eThis model combines a 4-way coaxial layout with a 4-ohm nominal impedance for use with compatible aftermarket head units and amplifiers. The 92 dB sensitivity rating supports efficient output from modest-power sources while remaining suitable for amplified systems. Its sound character is aimed at strong midbass presence and clear everyday playback.\u003c\/p\u003e\u003cp\u003eThe AD6510P is rated at 650 watts maximum power and 325 watts RMS per speaker. These published ratings make proper amplifier gain setting especially important for reliable operation. Match the system carefully and avoid driving the speakers into audible distortion.\u003c\/p\u003e\u003cp\u003eAn injection-molded cone and rubber edge form the core of the speaker's woofer assembly. This material combination is designed to provide a durable moving surface while helping control cone movement. The coaxial construction keeps the multi-driver arrangement in a single speaker location, which can simplify an upgrade where separate tweeter mounting is not planned.\u003c\/p\u003e\u003cp\u003eWith a stated 2.76-inch mounting depth and 5.63-inch cutout diameter, the AD6510P can be considered for installations with limited rear clearance. Verify the vehicle's factory opening, available depth, mounting-hole pattern, and window or mechanism clearance before purchase. It can serve as part of a front- or rear-speaker upgrade when paired with compatible wiring and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Fits many common vehicle speaker locations and custom panels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Design:\u003c\/strong\u003e Combines multiple drivers into one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides published headroom for compatible amplified systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Rating:\u003c\/strong\u003e Helps guide amplifier matching and gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e92 dB Sensitivity:\u003c\/strong\u003e Supports efficient output with compatible source power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many aftermarket head units and amplifiers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD6510P uses an injection-molded cone with a rubber edge for a durable speaker assembly. Its 4-way coaxial design places the speaker elements together in a compact footprint. This makes it practical for installations that do not have separate locations for dedicated tweeters.\u003c\/p\u003e\u003cp\u003eConfirm that your vehicle supports a 5.63-inch cutout and at least 2.76 inches of mounting depth before installation. Use appropriate vehicle-specific brackets or adapters when required, and check clearance behind the speaker before fastening it in place. For amplified use, set gains conservatively and use compatible 4-ohm-capable equipment.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614092386374,"sku":"AD6510P","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71FgnYTL49L.jpg?v=1784358286"},{"product_id":"audio360-ads6525m-6-5-dual-voice-coil-midrange-speaker","title":"AUDIO360 ADS6525M 6.5\" Dual Voice Coil Midrange Speaker","description":"\u003cp\u003eThe AUDIO360 ADS6525M is a 6.5-inch car-audio midrange speaker designed to bring vocal and instrumental detail into a custom vehicle sound system. It is intended for listeners building or upgrading systems that need dedicated midrange output rather than a full-range replacement speaker. Its compact 6.5-inch format supports use in many door-panel and custom-pod applications where a focused midrange driver is desired.\u003c\/p\u003e\u003cp\u003eWith 325 watts RMS power handling and 650 watts maximum power handling, the ADS6525M is made for amplified car-audio setups with appropriate power matching. The driver is positioned for clear, assertive midrange reproduction at higher listening levels. Matching amplifier output carefully to the RMS rating is the practical way to use its stated power capability.\u003c\/p\u003e\u003cp\u003eA dual voice coil design with a stated 4-ohm configuration provides wiring flexibility when planning a multi-speaker installation. This can be useful in systems where the amplifier, speaker count, and final load need to be considered together. Confirm the final wiring load with the amplifier manufacturer before installation.\u003c\/p\u003e\u003cp\u003eThe speaker uses a black press-paper cone and cloth-edge suspension. This combination is specified to keep the moving assembly lightweight while supporting controlled midrange reproduction. An oversized motor structure is also part of the driver design for its intended high-output car-audio role.\u003c\/p\u003e\u003cp\u003eA robust steel basket provides the mounting structure for the ADS6525M. The speaker is suited to door panels, custom speaker pods, and performance-oriented car-audio builds where a dedicated midrange driver is part of the system plan. Because it is a midrange speaker, system design should account for the other drivers and crossover strategy needed for the desired overall frequency coverage.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e325W RMS Handling:\u003c\/strong\u003e Supports use with a suitably matched amplified system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e650W Maximum Power:\u003c\/strong\u003e Provides a stated short-term maximum power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Midrange Format:\u003c\/strong\u003e Fits applications designed for a 6.5-inch driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coil Design:\u003c\/strong\u003e Offers flexibility when planning speaker wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress-Paper Cone:\u003c\/strong\u003e Uses a lightweight black paper-cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Basket Structure:\u003c\/strong\u003e Provides a robust frame for mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS6525M combines a black press-paper cone, cloth-edge suspension, oversized motor structure, and steel basket. These confirmed construction elements support its role as a dedicated midrange driver in a vehicle audio system. The speaker is finished in black.\u003c\/p\u003e\u003cp\u003eVerify vehicle mounting clearance, mounting-hole dimensions, and electrical compatibility before ordering, as cutout and mounting-depth measurements are not confirmed. The speaker is described for door panels, custom pods, and competition-oriented systems; use wiring appropriate for its dual voice coil configuration and confirm the final impedance load against the amplifier's specifications. For a balanced system, plan the remaining frequency ranges with compatible drivers and suitable crossover settings.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614101332038,"sku":"ADS6525M (MIDRANGE)","price":28.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71cC_WIyWzL.jpg?v=1784358638"},{"product_id":"audison-ap-6-5-6-5-prima-series-woofers","title":"Audison AP 6.5 6.5\" Prima Series Woofers","description":"\u003cp\u003eThe Audison AP 6.5 is a pair of 165 mm (6.5-inch) Prima Series woofers designed for vehicle speaker upgrades where factory locations and practical mounting depth matter. With a 4-ohm nominal impedance and 70 watts continuous power handling, they are suited to replacing compatible door or rear-deck midbass drivers. Their compact installation profile helps support OEM-style integration without requiring an oversized speaker location.\u003c\/p\u003e\u003cp\u003eThese woofers are intended for listeners building a more detailed and controlled front-stage or full-range speaker system. The 60 Hz to 5 kHz operating range supports midbass and midrange duties, while the 93.5 dB sensitivity helps them deliver useful output from modestly powered systems. They can be used in an upgrade path with compatible tweeters, amplification, and system tuning selected for the vehicle.\u003c\/p\u003e\u003cp\u003eA 32 mm pure-copper voice coil is used to support power handling and low-frequency control. The water-repellent treated paper cone has a profile developed with FEM simulation and optimized using Klippel R\u0026amp;D Scan Vibrometer testing. This engineering is intended to provide a controlled mechanical low-pass characteristic without a passive filter fitted to the woofer itself.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 uses a TPU surround with Audison's shallow Triple Wave profile, designed to maintain excursion linearity. Its high-density-flux ferrite motor, compact basket, and damping epoxy-secured motor structure support a durable installation in a vehicle environment. The design is focused on a direct-fit-oriented speaker upgrade rather than a large custom build.\u003c\/p\u003e\u003cp\u003eFor system planning, match the AP 6.5 with a compatible 4-ohm amplifier channel or head-unit output and allow for its 56 mm mounting-depth dimension. The woofer is supplied as a pair, while protective grilles are not included. Audison offers the APG 6.5 grille set separately for installations where exposed-driver protection is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits many common 6.5-inch vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70 W Continuous Power:\u003c\/strong\u003e Supports amplifier-matched system upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm Copper Voice Coil:\u003c\/strong\u003e Helps provide controlled low-frequency performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Suits the changing conditions inside vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTriple Wave TPU Surround:\u003c\/strong\u003e Designed for linear cone excursion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Mounting Depth:\u003c\/strong\u003e Helps fit constrained OEM speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 combines a water-repellent treated paper cone, TPU Triple Wave surround, high-density-flux ferrite magnet, and 32 mm pure-copper voice coil. Its compact basket has an abrasion-resistant, scratch-proof coating, while the motor is secured with damping epoxy adhesive. The speaker terminals use high-current fast-on connections with double contacts for both positive and negative poles, plus temperature-resistant covers to help protect against accidental short circuits.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's available opening and depth with the AP 6.5 dimensions: 165 mm overall diameter, 141 mm mounting cutout reference, and 56 mm mounting-depth reference. Use correct polarity at the marked terminals and select amplification appropriate for a 4-ohm speaker rated at 70 watts continuous power. For exposed installations, plan for separately available Audison APG 6.5 protective grilles.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218412102,"sku":"AP6-5","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zYDg-5m1L.jpg?v=1784361935"},{"product_id":"audison-ap-6-5p-6-5-component-woofer-pair","title":"Audison AP 6.5P 6.5\" Component Woofer Pair","description":"\u003cp\u003eThe Audison AP 6.5P is a pair of 165 mm (6.5-inch) component woofers designed for upgrading factory door-speaker locations. It is intended for listeners who want stronger midbass capability and greater power handling than typical OEM speakers can provide. Its compact format supports installations where available depth and mounting space are limited.\u003c\/p\u003e\u003cp\u003eWith 110 W continuous and 330 W peak power handling per speaker, the AP 6.5P is suited to systems using an external amplifier as well as carefully configured factory-system upgrades. Its 4-ohm nominal impedance makes it compatible with many conventional car-audio amplifier channels. The 92.5 dB sensitivity specification supports efficient output from an appropriately matched system.\u003c\/p\u003e\u003cp\u003eThe woofer uses a 32 mm Copper-Clad Aluminum Wire voice coil to manage higher applied power while keeping moving mass controlled. Audison specifies 5.6 mm Xmax for increased cone travel during dynamic passages. The result is a woofer engineered for controlled midbass response and dependable operation within its rated range.\u003c\/p\u003e\u003cp\u003eA water-repellent treated paper cone provides the diaphragm material, while the magnetic assembly is sized to help maintain cone control at high excursion. The basket was engineered to reduce airflow resistance while retaining a compact shape. These design choices support use in OEM-style door locations where installation clearance is an important consideration.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P is a woofer component rather than a complete coaxial speaker, making it a practical foundation for a custom component system. It can be paired with compatible tweeters, crossover networks, amplification, and sound treatment based on the vehicle and installation goals. For a front-stage upgrade, confirm fitment, available mounting depth, and the crossover plan before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Woofer Size:\u003c\/strong\u003e Fits the common 6.5-inch speaker class for many door-speaker upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110 W Continuous Handling:\u003c\/strong\u003e Supports use with appropriately matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e32 mm CCAW Voice Coil:\u003c\/strong\u003e Helps manage power while supporting controlled cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Excursion:\u003c\/strong\u003e Rated at 5.6 mm Xmax for handling demanding dynamic peaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Cone:\u003c\/strong\u003e Water-repellent cone material is suited to automotive-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Basket:\u003c\/strong\u003e Designed to ease installation in OEM-style speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P combines a water-repellent treated paper cone, 32 mm CCAW voice coil, compact basket, and substantial magnetic assembly. Audison designed the basket to lower airflow resistance while preserving a compact installation profile. Each speaker has a specified weight of 1.45 kg.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, and panel clearance before ordering or installation. The manufacturer lists a 165 mm overall diameter, 141 mm mounting-hole diameter, 75 mm total depth, and 66.5 mm mounting depth. Because this is a woofer component, use suitable high-pass and low-pass filtering, and select compatible tweeters and crossovers when building a component system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614218805318,"sku":"AP6-5P","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618Ch2qrJ1L.jpg?v=1784361979"},{"product_id":"audison-apk163-6-5-3-way-component-speaker-set","title":"Audison APK163 6.5\" 3-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 163 is a 4-ohm, three-way component speaker system designed for upgrading factory car audio while retaining practical OEM-style installation options. It combines a 6.5-inch AP 6.5 woofer, 4-inch AP 4 midbass, and 1-inch AP 1 tweeter with dedicated passive crossover networks. This arrangement is suited to listeners who want greater frequency coverage and separation than a typical two-way component system.\u003c\/p\u003e\u003cp\u003eWith 125 watts continuous and 375 watts peak power handling, the APK 163 is intended for use with an appropriately matched aftermarket amplifier or a capable factory-powered upgrade. Its specified 50 Hz to 20 kHz frequency response covers bass, midrange, and treble duties across three separate drivers. The system's 4-ohm nominal impedance supports conventional car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil and a water-repellent pressed-paper cone to provide controlled low-frequency output. The AP 4 midbass extends the system's vocal and upper-midrange coverage, helping place more of the musical range in dedicated drivers. A 26 mm Tetolon-fiber AP 1 tweeter handles high frequencies and incorporates an acoustic lens intended for OEM grille installations.\u003c\/p\u003e\u003cp\u003eAudison equips the APK 163 with separate compact crossovers for the woofer, midbass, and tweeter. This design helps simplify OEM replacement installations by avoiding the need to route additional crossover wiring through the vehicle door. The tweeter crossover also provides 0 dB and +2 dB level settings for adjustment based on tweeter position and grille placement.\u003c\/p\u003e\u003cp\u003eThe woofer and midbass use water-repellent treated paper cones, TPU surrounds, and compact baskets intended for shallow OEM locations. Their Triple Wave surround profile is engineered to support linear cone excursion, while the woofer uses high-current fast-on terminals with dual contacts for flexible connection. Grilles and crossover networks are included, making the APK 163 a complete passive three-way front-stage speaker package.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Separate woofer, midbass, and tweeter cover dedicated frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Passive Crossovers:\u003c\/strong\u003e Individual networks simplify integration of each speaker component.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Selection:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cones:\u003c\/strong\u003e Treated woofer and midbass cones suit vehicle-door environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Focused Connections:\u003c\/strong\u003e Woofer fast-on terminals support quick, flexible wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer and AP 4 midbass use high-density-flux ferrite magnets, water-repellent pressed-paper cones, and TPU Triple Wave surrounds. Their compact baskets have an abrasion-resistant, scratch-resistant coating, while the woofer motor is secured with damping epoxy adhesive. The AP 1 tweeter uses a 26 mm Tetolon-fiber diaphragm and wide-roll surround.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has mounting positions for a 165 mm woofer, 100 mm midbass, and 26 mm tweeter before installation. Install each included crossover with its intended driver and use the specified passive crossover points rather than bypassing the networks. Select the tweeter crossover's 0 dB or +2 dB setting according to placement, particularly when the tweeter is mounted behind a restrictive factory grille.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614222704710,"sku":"APK163","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61LYj2RlIVL.jpg?v=1784362419"},{"product_id":"audison-apk-165-6-5-2-way-component-speaker-system","title":"Audison APK 165 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK 165 is a 4-ohm, 6.5-inch two-way component speaker system designed for upgrading factory front-stage audio. It combines an AP 6.5 woofer, AP 1 tweeter, APCX TW passive crossover, and included grilles. The system is intended for installations where separate woofer and tweeter locations can improve staging and detail over a basic full-range door speaker.\u003c\/p\u003e\u003cp\u003eWith 100 watts continuous power handling and 300 watts peak power handling, the APK 165 is suited to systems using an appropriate external amplifier or compatible amplified source. Its 60 Hz to 20 kHz frequency response covers the main midbass and high-frequency range for a component front stage. The woofer's 93.5 dB SPL specification supports effective output from moderate-power car-audio amplification.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 woofer uses a 32 mm pure-copper voice coil, a water-repellent treated paper cone, and a TPU surround with Audison's shallow Triple Wave profile. This combination is engineered for controlled low-frequency reproduction and linear cone travel. The woofer has a listed maximum linear excursion of ±2.5 mm and an 80 Hz resonant frequency.\u003c\/p\u003e\u003cp\u003eThe AP 1 tweeter uses a 26 mm diaphragm with a wide-roll surround and an acoustic lens. The lens is designed to help address response effects in the 10 kHz to 13 kHz range that can occur when a tweeter is mounted behind restrictive factory grilles. This makes the system especially relevant for OEM-style mounting locations as well as exposed A-pillar placements.\u003c\/p\u003e\u003cp\u003eAn APCX TW passive high-pass crossover is included to direct high frequencies to the tweeter. Its selectable 0 dB and +2 dB level settings allow adjustment for different tweeter mounting conditions. The APK 165 can serve as the front component stage in a larger system with rear fill, a dedicated amplifier, DSP processing, and a subwoofer for deeper bass.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofer and tweeter support more flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Handling:\u003c\/strong\u003e Matches appropriately powered 4-ohm amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAPCX TW Crossover:\u003c\/strong\u003e Provides a high-pass network for the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or +2 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Supports use in vehicle door locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Terminals:\u003c\/strong\u003e Helps simplify woofer connection during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5 woofer uses a compact, abrasion-resistant and scratch-resistant coated basket, with the motor secured using damping epoxy adhesive. Its treated paper cone is paired with a thermoplastic polyurethane surround, while the tweeter incorporates a wide-roll surround and acoustic lens. Included grilles provide an additional finishing option where the speakers are not concealed by factory trim.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available 165 mm speaker opening, mounting depth, mounting-hole pattern, and tweeter location before installation. Use the supplied passive crossover between the signal source or amplifier and the tweeter, selecting 0 dB for an A-pillar installation without an added grille or +2 dB when the tweeter is installed behind an OEM grille. The woofer's high-current fast-on terminals use double contacts on both positive and negative poles for connection flexibility.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223130694,"sku":"APK165","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL.jpg?v=1784362462"},{"product_id":"audison-apk165ohm2-6-5-2-way-component-speaker-set","title":"Audison APK165OHM2 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Audison APK 165 Ω2 is a 6.5-inch, two-way component speaker system for vehicle audio upgrades. It combines AP 6.5 Ω2 woofers, AP 1 tweeters, dedicated passive crossovers, and grilles. The separate woofer and tweeter components allow placement that better suits factory speaker locations than a single coaxial speaker.\u003c\/p\u003e\u003cp\u003eThis system uses a 2-ohm nominal impedance and is intended for amplifiers that are stable at a 2-ohm speaker load. It is rated for 100 watts continuous power handling and 300 watts peak power. Confirm amplifier load capability and available installation space before choosing this version.\u003c\/p\u003e\u003cp\u003eThe APK 165 Ω2 has a specified frequency response of 50 Hz to 20 kHz and a 95 dB sensitivity rating. Its 75 Hz woofer resonance frequency and 2.8 mm maximum linear excursion support useful low-frequency output within a properly installed door or factory speaker location. A separate tweeter is used to cover upper frequencies instead of asking the woofer to reproduce the full range.\u003c\/p\u003e\u003cp\u003eThe AP 6.5 Ω2 woofer uses a water-repellent treated paper cone and a TPU surround with Audison's Triple Wave profile. Its 25 mm voice coil has a 10 mm winding height, while the compact basket is finished with an abrasion- and scratch-resistant coating. The AP 1 tweeter incorporates an acoustic lens intended to help balance response in the 10 kHz to 13 kHz region when used behind restrictive factory grilles.\u003c\/p\u003e\u003cp\u003eTwo separate passive crossovers divide the signal between the woofer and tweeter. The APCX WF Ω2 woofer network uses a low-loss inductor, while the APCX TW Ω2 tweeter network provides selectable Hi-Contour operation. Integrated crossover leads terminate in polarity-differentiated fast-on connectors to support OEM-style speaker replacement wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm System:\u003c\/strong\u003e Designed to draw more power from compatible 2-ohm-stable amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W Continuous Rating:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Direct woofer and tweeter frequencies to their intended drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Contour Tweeter Setting:\u003c\/strong\u003e Provides a selectable upper-frequency contour option for installation conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Paper Woofer Cone:\u003c\/strong\u003e Uses water-repellent paper material for the 6.5-inch woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Fast-On Leads:\u003c\/strong\u003e Polarity-differentiated connectors simplify crossover-to-speaker connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer uses a 165 mm frame with a 127 mm cone diameter, a 25 mm voice coil, and an 85 x 32 x 15 mm magnet. Its TPU Triple Wave surround is designed for linear excursion, while the compact basket is coated for abrasion and scratch resistance. The 26 mm AP 1 tweeter uses a 20 mm voice coil and an acoustic lens, and protective grilles are included.\u003c\/p\u003e\u003cp\u003eInstall the woofers only where the vehicle provides adequate mounting depth and clearance, and mount the tweeters securely behind a protective grille. Route the amplifier signal first to the supplied APCX WF Ω2 and APCX TW Ω2 passive networks, then connect each network to its matching driver using the integrated fast-on leads. Use an amplifier that is explicitly rated for 2-ohm operation, observe polarity, and select the tweeter contour setting according to the mounting position and factory-grille presence.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614223589446,"sku":"APK165OHM2","price":449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81IO11vf2SL_c825f717-f13c-4df3-9bd2-045249988241.jpg?v=1784362512"},{"product_id":"audison-apk165p-6-5-2-way-component-speaker-system","title":"Audison APK165P 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Audison APK165P is a 6.5-inch, 2-way component speaker system for upgrading front-stage sound in compatible vehicle locations. It pairs separate AP 6.5P woofers with AP 1P tweeters and dedicated passive crossover modules. The system is designed for installations where the woofer and tweeter are mounted separately rather than in a single coaxial speaker location.\u003c\/p\u003e\u003cp\u003eWith a 4-ohm nominal impedance, 115-watt continuous power handling, and 345-watt peak power handling, this system is suited to aftermarket audio systems using a compatible head unit or external amplifier. Its 50 Hz to 24 kHz stated system frequency response covers bass and midrange from the door woofer through high frequencies from the separate tweeter. The 92.5 dB SPL system sensitivity rating supports efficient output from properly matched equipment.\u003c\/p\u003e\u003cp\u003eThe AP 6.5P woofer uses a water-repellent treated paper cone and a 32 mm CCAW voice coil. Its 5.6 mm Xmax specification and compact basket are intended to support factory-style door mounting locations. The AP 1P tweeter uses a 29 mm Tetolon fibre dome with a 25 mm CCAW voice coil.\u003c\/p\u003e\u003cp\u003eAudison's AIF, or Any Install Faceplate, system gives the AP 1P tweeter interchangeable mounting options. Three mounting accessories are supplied to support different installation approaches, helping accommodate common factory tweeter locations and custom placements. The tweeter's double-neodymium magnetic assembly and FEM-optimized dome profile are engineered for high-frequency extension and off-axis dispersion.\u003c\/p\u003e\u003cp\u003eSeparate compact crossover modules divide the signal between the woofer and tweeter. The woofer low-pass filter is specified at 4 kHz with a 6 dB\/octave slope, while the tweeter high-pass filter is 4 kHz with a 12 dB\/octave slope. This makes the APK165P a practical component set for a front-speaker upgrade built around compatible 4-ohm amplification and proper vehicle-specific mounting hardware.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate 6.5-inch woofers and 29 mm tweeters allow dedicated placement of each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e115 W Continuous Handling:\u003c\/strong\u003e Supports use with properly matched aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting:\u003c\/strong\u003e Interchangeable faceplates and supplied mounting accessories support varied mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coils:\u003c\/strong\u003e Copper-clad aluminum wire voice coils are used in both woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover Network:\u003c\/strong\u003e Separate compact woofer and tweeter crossover modules simplify signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e The AP 6.5P woofer cone is treated for automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AP 6.5P woofer combines a treated paper cone, 32 mm CCAW voice coil, compact basket, and a 100 x 40 x 18 mm magnetic assembly. The AP 1P tweeter uses a Tetolon fibre dome, 25 mm CCAW voice coil, and double-neodymium magnetic assembly. The system also provides a selectable tweeter level setting of 0 dB or +3 dB at the crossover.\u003c\/p\u003e\u003cp\u003eConfirm door opening diameter, mounting depth, and clearance behind the panel before installation; the AP 6.5P lists a 141 mm cutout diameter and 66.5 mm mounting depth. Route each channel through its assigned passive crossover rather than connecting the tweeter directly to a full-range amplifier output. Secure all components firmly, use the appropriate faceplate and mounting accessory for the tweeter location, and confirm polarity before reassembling vehicle trim.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614226604102,"sku":"APK165P","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71KYClkNHCL.jpg?v=1784362857"},{"product_id":"audison-avk-6a-p-ii-6-5-2-way-active-speaker-kit","title":"Audison AVK 6A P II 6.5\" 2-Way Active Speaker Kit","description":"\u003cp\u003eThe Audison AVK 6A P II is a 6.5-inch two-way active component speaker kit built around separate AV 6.5 P II mid-bass drivers and AV 1.1 II tweeters. It is intended for vehicle audio systems using an active crossover, DSP, or separate amplifier channels rather than an included passive crossover network. This configuration gives an installer control over crossover frequency, level, time alignment, and equalization.\u003c\/p\u003e\u003cp\u003eThe AV 6.5 P II woofer is rated for 150 watts continuous power handling and uses a 40 mm CCAW voice coil. Its 45-7,500 Hz frequency response, pressed paper cone, ferrite motor, and 4-ohm nominal impedance support use as the mid-bass foundation of an active front stage. The woofer is designed to cover bass and midrange duties before handing off to the separate tweeter.\u003c\/p\u003e\u003cp\u003eThe AV 1.1 II tweeter uses a 28 mm Tetolon fiber dome and has a stated frequency response of 1,000-40,000 Hz. It is Hi-Res Audio compliant under the stated JAS\/IEC 60268-5 test condition. Its extended upper-frequency range and separate mounting hardware help accommodate typical off-axis vehicle placements.\u003c\/p\u003e\u003cp\u003eBecause this is the active version of the AVK 6 P II system, no passive crossovers are included. Audison recommends a 24 dB\/octave Linkwitz-Riley high-pass filter as low as 1,800 Hz for the AV 1.1 II when paired in a two-way system with a 6.5-inch woofer. The AV 6.5 P II can be high-pass filtered as low as 70 Hz with the same filter alignment.\u003c\/p\u003e\u003cp\u003eThe kit is suited to enthusiasts and installers assembling a DSP-based front-stage upgrade with independent woofer and tweeter channels. OEM-style two-pin connectors and standard terminals provide wiring flexibility, while supplied pigtail wiring supports service-friendly disconnection. Optional Audison AVG 6.5 B II or AVG 6.5 S II grilles are available separately for the woofers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Two-Way Configuration:\u003c\/strong\u003e Separates woofer and tweeter filtering for DSP-based system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous Woofer Rating:\u003c\/strong\u003e Supports substantial mid-bass power handling with suitable amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm CCAW Woofer Coil:\u003c\/strong\u003e Helps support excursion capability and heat dissipation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 mm Tetolon Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Inductance Motor Design:\u003c\/strong\u003e Aluminum shorting ring supports cleaner upper-midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAIF Tweeter Mounting System:\u003c\/strong\u003e Faceplates and multiple mounting accessories aid installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 P II combines a die-cast aluminum basket, magnet cover, high-density-flux ferrite magnet, pressed paper cone, and butyl rubber surround. Its motor incorporates an aluminum shorting ring, while the 28 mm AV 1.1 II tweeter uses a Tetolon fiber dome and neodymium magnet. The woofer has a 165 mm overall diameter, a 140.8 mm Dimension B measurement, and a 74.2 mm Dimension C measurement; installation clearance should be verified against the vehicle and the supplied dimensional drawing.\u003c\/p\u003e\u003cp\u003eThis kit needs an active crossover solution such as a DSP and separate amplified channels for the tweeters and woofers, because passive crossovers are not supplied. Audison specifies 24 dB\/octave Linkwitz-Riley filtering, with the tweeter high-passed from 1,800 Hz in a two-way alignment and the woofer high-passed from 70 Hz. The package includes woofer and tweeter drivers, faceplates, four tweeter mounting accessories, a plug-and-play cable, and Audison logo badges.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614241873990,"sku":"AVK6APII","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TLlGEKfLL.jpg?v=1784363738"},{"product_id":"audison-avk6sii-6-5-2-way-component-speaker-kit","title":"Audison AVK6SII 6.5\" 2-Way Component Speaker Kit","description":"\u003cp\u003eThe Audison AVK6SII is a 6.5-inch, 2-way component speaker kit designed for a front-stage car audio upgrade. It pairs separate AV 6.5 S II mid-bass woofers with AV 1.0 II tweeters and dedicated passive crossover networks. The separate-driver layout allows the tweeters to be positioned higher in the cabin while the woofers fit typical door or kick-panel locations.\u003c\/p\u003e\u003cp\u003eThis kit is intended for listeners who want more controlled mid-bass, clearer vocals, and extended treble than a coaxial or factory speaker arrangement can typically provide. The 6.5-inch woofers are rated for 125 watts continuous power each and use a 36 mm CCAW voice coil. Their 50 Hz to 5.5 kHz operating range supports use as the mid-bass foundation of a two-way front stage.\u003c\/p\u003e\u003cp\u003eThe AV 1.0 II tweeters use 25.4 mm Tetolon fiber domes and are Hi-Res Audio certified with response specified to 40 kHz. Their compact form and supplied mounting hardware support flush, angled, and surface-oriented placement choices. This can be useful where factory sail panels, A-pillars, or custom tweeter locations place the listener off-axis.\u003c\/p\u003e\u003cp\u003eAudison separates the passive networks into an AVCX 2 W low-pass crossover for each woofer and an AVCX 2 T high-pass crossover for each tweeter. The woofer section uses a 6 dB\/octave low-pass network, while the tweeter section uses a 12 dB\/octave high-pass network. The crossover system is set around 3.5 kHz with the woofer Mid-Contour control off, and it provides adjustments for tweeter output and woofer mid-contour response.\u003c\/p\u003e\u003cp\u003eThe AVK6SII is suitable for a passive two-channel installation or for a system planned around bi-amplification. It includes plug-and-play speaker pigtails alongside standard speaker terminals, which can simplify serviceability and vehicle integration. For an active DSP-based installation, Audison specifies a 3 kHz, 24 dB\/octave high-pass point for the AV 1.0 II tweeter and a 70 Hz, 24 dB\/octave high-pass point for the AV 6.5 S II woofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers and tweeters support more flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125 W Continuous Woofer Rating:\u003c\/strong\u003e Supports matching with appropriately powered external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res AV 1.0 II Tweeters:\u003c\/strong\u003e Extends high-frequency response to a specified 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Woofer Voice Coil:\u003c\/strong\u003e A 36 mm coil supports excursion and thermal handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Dedicated woofer and tweeter networks simplify component placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Response Controls:\u003c\/strong\u003e Adjust tweeter level and woofer mid-contour for the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 6.5 S II woofer combines a pressed paper cone, butyl rubber surround, die-cast aluminum basket, and high-density-flux ferrite magnet assembly. Its motor includes an aluminum shorting ring to reduce inductance, while the 36 mm copper-clad aluminum voice coil is paired with a compact 61 mm mounting-depth specification. The AV 1.0 II uses a Tetolon fiber dome and AIF faceplate system with four supplied faceplates.\u003c\/p\u003e\u003cp\u003eConfirm available door clearance and the required 140.8 mm woofer mounting opening before installation; the woofer has a 165 mm outside diameter and 61 mm mounting depth. Install each AVCX 2 W and AVCX 2 T crossover in a dry, secure location and follow the labeled wiring layout for passive or bi-amplified operation. The kit includes mounting options for the tweeters, plus OEM-style two-pin pigtails that may be soldered or crimped to vehicle wiring.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242234438,"sku":"AVK6SII","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ql6H74ILL.jpg?v=1784363782"},{"product_id":"audison-avx-6-5-ii-6-5-2-way-coaxial-speakers","title":"Audison AVX 6.5 II 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Audison AVX 6.5 II is a 6.5-inch, 2-way coaxial speaker set from the VOCE II line. It combines a 165 mm woofer and centrally mounted 25.4 mm dome tweeter in each speaker, providing a compact solution where separate tweeter locations are not practical. The set is intended for vehicle audio upgrades that need broad bandwidth and a cohesive point-source layout.\u003c\/p\u003e\u003cp\u003eIts coaxial architecture places the tweeter at the center of the woofer, helping the two drivers originate sound from the same location. This is useful in door, rear-deck, or factory-style speaker positions where listening angles vary. The rated low-frequency response extends from 45 Hz, while high-frequency response reaches 40 kHz.\u003c\/p\u003e\u003cp\u003eThe woofer uses a semi-pressed paper cone, rubber surround, aluminum chassis, 40 mm CCAW voice coil, and high-density-flux ferrite magnet. The central tweeter uses a Tetolon fibre dome and surround, 25 mm CCAW voice coil, and neodymium magnet. These materials support the AVX 6.5 II's wide operating range in a compact coaxial format.\u003c\/p\u003e\u003cp\u003eAudison supplies separate passive crossover modules for the woofer and tweeter: AVCX 2 XW and AVCX 2 XT. This separates the filtering duties rather than using a single shared inline network. The speaker can alternatively be used in an active two-way system with DSP-based filtering and separate amplifier channels for the woofer and tweeter sections.\u003c\/p\u003e\u003cp\u003eThe AVX 6.5 II suits installations seeking an upgraded 6.5-inch coaxial solution with passive-crossover flexibility and an active-system upgrade path. OEM-style 2-pin connectors with bare-wire pigtails are included for serviceable vehicle wiring, while conventional speaker terminals remain available. Confirm available mounting clearance and the vehicle's speaker mounting arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Layout:\u003c\/strong\u003e Combines woofer and tweeter in one vehicle-friendly speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certification:\u003c\/strong\u003e Supports high-frequency reproduction extending to 40 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcentric 1-Inch Tweeter:\u003c\/strong\u003e Centers the tweeter within the woofer for point-source emission.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Includes dedicated AVCX 2 XW and AVCX 2 XT modules.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive-System Capability:\u003c\/strong\u003e Supports DSP-based active two-way filtering and tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Style Connections:\u003c\/strong\u003e Includes 2-pin pigtail connectors for serviceable vehicle wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVX 6.5 II uses an aluminum chassis, semi-pressed paper woofer cone, rubber surround, ferrite woofer motor, and neodymium tweeter motor. Its 25.4 mm Tetolon fibre dome tweeter is mounted concentrically, and the woofer uses a 40 mm CCAW voice coil on a glass-fiber former. Overall dimension A is 165 mm, with a listed overall depth of 74.2 mm.\u003c\/p\u003e\u003cp\u003eFor passive operation, connect the woofer and tweeter sections through the included AVCX 2 XW and AVCX 2 XT crossover modules. For an active DSP installation, Audison recommends a 70 Hz high-pass filter for the woofer and a 3 kHz high-pass point for the tweeter, both using 24 dB\/octave Linkwitz-Riley filters. Check mounting depth, mounting diameter, wiring polarity, and amplifier capability before fitting the speakers.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614242889798,"sku":"AVX6-5II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_wdvghMlL.jpg?v=1784363838"},{"product_id":"cerwin-vega-h652-6-5-2-way-coaxial-speakers","title":"Cerwin-Vega H652 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H652 is a pair of 6.5-inch, 2-way coaxial full-range car speakers designed for replacing compatible factory speakers or building a straightforward speaker upgrade. Each speaker combines a woofer and tweeter in one assembly, helping deliver a broad frequency range from a standard-size mounting location. The pair is rated for 90 watts RMS and 270 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eThis HED Series model is intended for listeners who want clearer full-range sound from a 6.5-inch speaker position without moving to a separate component-speaker setup. Its 4-ohm nominal impedance is suited to common car-audio speaker systems that support 4-ohm loads. Confirm your vehicle's opening, mounting depth, and wiring arrangement before installation.\u003c\/p\u003e\u003cp\u003eA responsive polypropylene woofer cone handles bass and midrange duties, while the 1-inch PEI tweeter reproduces higher frequencies. The tweeter uses a neodymium magnet and a dynamically balanced design. Together, the coaxial layout provides a compact full-range solution for front or rear speaker locations where fitment permits.\u003c\/p\u003e\u003cp\u003eThe H652 uses an integrated crossover with tweeter protection to manage the handoff between the woofer and tweeter. This design supports smoother frequency transitions while helping protect the tweeter during higher-volume operation. The speaker's specified frequency response is 89 Hz to 20 kHz, with an 88 dB sensitivity rating at 1W\/1M.\u003c\/p\u003e\u003cp\u003eFor a complete vehicle system, the H652 can be used as a compatible replacement pair or combined with additional speakers and appropriate amplification. Its 1.77-inch mounting depth can be useful where door or rear-deck clearance is limited, but vehicle fitment should always be measured. Mesh grilles are included for installations where the speakers are exposed rather than mounted behind factory panels.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 1-inch tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Power Handling:\u003c\/strong\u003e Supports systems matched to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Handles bass and midrange reproduction in a durable cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Provides the woofer with a durable, compliant outer suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter and includes tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped Steel Basket:\u003c\/strong\u003e Uses a rigid, powder-coated steel frame to support the speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H652 uses a polypropylene cone, UV-treated foam surround, dynamically balanced PEI tweeter, and strontium ferrite woofer magnet. Its basket is a powder-coated, rigid stamped-steel design. The speakers include mesh grilles and are sold as a pair.\u003c\/p\u003e\u003cp\u003eVerify a 4.88-inch cutout, 1.77-inch mounting-depth clearance, and 6.26-inch overall-diameter clearance at the intended location before purchase. Wire each speaker with correct polarity to a compatible 4-ohm car-audio channel. Use the included mesh grilles when the installation does not retain a suitable factory grille or panel.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614361935942,"sku":"CER-H652","price":121.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/710ZSqpN0iL.jpg?v=1784366950"},{"product_id":"cerwin-vega-h653-6-5-3-way-coaxial-speakers","title":"Cerwin-Vega H653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H653 is a pair of 6.5-inch, 3-way coaxial car speakers designed as a direct full-range upgrade from many factory door or rear-deck speakers. Each speaker combines a woofer, dedicated midrange driver, and tweeter in one assembly. This format helps add more complete sound coverage without requiring separate component crossovers.\u003c\/p\u003e\u003cp\u003eThe H653 uses a 6.5-inch polypropylene woofer for the lower frequencies, a 2.5-inch midrange for vocal and instrumental detail, and a 1-inch PEI balanced-dome tweeter for upper-frequency reproduction. Its published frequency response is 89 Hz to 20 kHz. With a 4-ohm nominal impedance, it is intended for conventional car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003ePower handling is rated at 90 watts RMS and 270 watts peak per speaker. The pair is rated for 180 watts RMS and 540 watts peak combined. Its 88 dB sensitivity rating and integrated crossover make it suitable for use with a compatible factory radio or an external amplifier matched appropriately to the speakers.\u003c\/p\u003e\u003cp\u003eDurability-focused construction includes polypropylene cones, UV-treated foam surrounds, ferrite woofer magnets, and powder-coated stamped-steel baskets. The coaxial layout keeps the midrange and tweeter integrated with the woofer, simplifying installation where space is limited. Built-in tweeter protection is included as part of the internal crossover network.\u003c\/p\u003e\u003cp\u003eThe H653 is suited to listeners replacing worn factory speakers or building a straightforward full-range system in compatible factory locations. It can be used in door or rear-deck positions when the mounting dimensions and available depth are confirmed. For systems seeking deeper low bass, these speakers can be paired with a separate subwoofer and properly configured amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90W RMS Handling:\u003c\/strong\u003e Supports 90 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a durable cone material for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5-Inch Midrange Driver:\u003c\/strong\u003e Handles important midrange information between bass and treble.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeter:\u003c\/strong\u003e Reproduces high-frequency detail with a neodymium magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover Protection:\u003c\/strong\u003e Includes tweeter protection without an external crossover box.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H653 uses a powder-coated, rigid stamped-steel basket with a ferrite woofer magnet, polypropylene cone, and UV-treated foam surround. Its 1-inch PEI tweeter and 2.5-inch midrange are mounted concentrically with the 6.5-inch woofer. The manufacturer specification sheet also lists grilles for this model.\u003c\/p\u003e\u003cp\u003eConfirm both the 4.88-inch cutout requirement and 1.77-inch mounting-depth requirement before installation, as factory 6.5-inch locations can vary by vehicle. Wire each speaker with correct polarity and use a compatible 4-ohm speaker channel. The integrated crossover simplifies hookup, but vehicle-specific mounting adapters, harnesses, or hardware may still be required depending on the installation location.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614362394694,"sku":"CER-H653","price":194.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71XYe0aitoL.jpg?v=1784366996"},{"product_id":"cerwin-vega-h65c-6-5-2-way-component-speaker-set","title":"Cerwin-Vega H65C 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega H65C is a 6.5-inch, 2-way component speaker set designed for upgrading a vehicle’s front-stage audio. It separates the woofer and tweeter so they can be positioned independently for a more focused listening area than a typical coaxial speaker. The set is suited to factory-speaker replacements and custom car-audio installations where mounting space permits.\u003c\/p\u003e\u003cp\u003eA 6.5-inch polypropylene woofer handles bass and midrange duties, while the separate 1-inch PEI tweeter handles upper-frequency detail. This arrangement is intended to produce balanced output across its rated 88 Hz to 20 kHz frequency response. With 87 dB sensitivity and a 4-ohm nominal impedance, it is designed for common car-audio speaker applications.\u003c\/p\u003e\u003cp\u003eThe H65C is rated for 120 watts RMS and 360 watts maximum power handling. Its 79 Hz free-air resonance and polypropylene-cone woofer support a clear, controlled midbass foundation within a properly installed system. The 1-inch tweeter uses a neodymium magnet and dynamically balanced PEI construction for high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eDurability-focused construction includes a UV-treated foam surround, ferrite woofer magnet, and powder-coated stamped-steel basket. The rigid basket provides a stable mounting structure for the woofer, while the treated surround is intended for automotive use. An integrated crossover with tweeter protection manages the handoff between the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eThis component set can be used when replacing separate factory woofer-and-tweeter systems or when building a custom front stage. Its 4.88-inch cutout diameter and 1.77-inch mounting depth should be checked against the vehicle’s available door, kick-panel, or custom-mounting space. Mesh grilles are included for installations where the drivers require added physical protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a more tailored installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched within the rated continuous-power range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Handles midbass and midrange reproduction with a responsive design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Tweeter:\u003c\/strong\u003e Reproduces high frequencies with a neodymium magnet assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected Crossover:\u003c\/strong\u003e Directs frequencies to the appropriate driver and protects the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Adds durability for long-term automotive speaker use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H65C uses polypropylene woofer cones, UV-treated foam surrounds, strontium ferrite woofer magnets, and dynamically balanced PEI tweeters with neodymium magnets. Each woofer is built around a powder-coated, rigid stamped-steel basket. The set also includes mesh grilles.\u003c\/p\u003e\u003cp\u003eConfirm the 4.88-inch cutout, 6.26-inch overall diameter, 1.77-inch mounting depth, and 2.13-inch overall height before installation. The component system uses crossovers between the amplifier or speaker-output connection, woofer, and tweeter, so correct polarity should be maintained throughout wiring. Install crossover components in a protected, ventilated location away from moisture and factory wiring looms where practical.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614381760582,"sku":"CER-H65C","price":212.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/719eAiubzgL.jpg?v=1784367351"},{"product_id":"cerwin-vega-h7652-6-5-2-way-coaxial-car-speakers","title":"Cerwin-Vega H7652 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7652 is a pair of 6.5-inch HED Series 2-way coaxial car speakers designed for replacing compatible factory door or rear-deck speakers. Its coaxial layout places a tweeter over the woofer, allowing both drivers to fit within a single speaker location. The result is a straightforward full-range speaker upgrade for vehicles with suitable mounting space.\u003c\/p\u003e\u003cp\u003eEach H7652 speaker is rated for 60 watts RMS and 320 watts maximum power handling. The pair is rated for 120 watts RMS and 640 watts maximum power handling. Its 4-ohm nominal impedance is suited to common vehicle audio systems and compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA polypropylene woofer cone and treated foam surround form the low- and mid-frequency section of the speaker. The centrally mounted 1-inch balanced PEI dome tweeter is intended to handle high-frequency detail within the same assembly. This 2-way arrangement keeps vocals, instruments, and high-frequency content together in one compact replacement speaker.\u003c\/p\u003e\u003cp\u003eThe H7652 uses a stamped-steel basket and ferrite magnet motor structure. It also has a 1-inch high-temperature voice coil and an internal crossover. These elements support a conventional coaxial-speaker design without requiring a separate external passive crossover.\u003c\/p\u003e\u003cp\u003eWith a 5.7-inch mounting cutout requirement and approximately 2.24 inches of mounting depth, the H7652 is intended for many 6.5-inch speaker locations. It can be used in doors or rear decks when the vehicle provides adequate clearance. Confirm mounting depth, cutout diameter, screw pattern, and grille clearance before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Driver System:\u003c\/strong\u003e Uses dedicated woofer and tweeter sections for full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Per Speaker:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common car-audio speaker output configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs frequencies within the coaxial speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7652 combines a polypropylene cone, treated foam surround, mylar diaphragm material, ferrite magnet, and stamped-steel basket. A balanced PEI dome tweeter is mounted concentrically with the woofer. Speaker grilles are included for installations where grille protection is needed.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts a 5.7-inch cutout and approximately 2.24 inches of top-mount depth before installation. Mount the speaker securely to a flat baffle and seal around the frame to reduce air leaks. When routing replacement wire through metal panels, use grommets and observe correct positive and negative polarity.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614754496582,"sku":"CER-H7652","price":75.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61OXfm3QZOL.jpg?v=1784367807"},{"product_id":"cerwin-vega-h7653-6-5-3-way-coaxial-speakers","title":"Cerwin-Vega H7653 6.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H7653 is a 6.5-inch, 3-way coaxial speaker set designed to replace compatible factory door or rear-deck speakers. Its all-in-one coaxial layout combines low-, mid-, and high-frequency drivers in each speaker, helping simplify an audio-system upgrade. It is intended for listeners seeking clearer, fuller sound from a standard 4-ohm car-audio speaker position.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS power handling and 340 watts maximum power handling, the H7653 is suited to appropriately matched factory radios or aftermarket amplification. Its 50 Hz to 20 kHz stated frequency response covers bass, vocal, and treble ranges within a compact speaker format. The 3-way arrangement is designed to add midrange detail and high-frequency definition beyond a basic single-cone factory speaker.\u003c\/p\u003e\u003cp\u003eThe H7653 uses a single 4-ohm voice coil, making it compatible with many conventional car-audio speaker outputs. An internal crossover is included to direct frequencies among the speaker's integrated drivers. This avoids the need to add a separate external crossover for the coaxial speaker assembly.\u003c\/p\u003e\u003cp\u003eIts construction includes a stamped-steel basket and ferrite ceramic magnet, with a polypropylene cone, treated-foam surround, and Mylar diaphragm listed in the manufacturer specifications. Other published product information identifies a treated red spider and a balanced PEI\/polypropylene dome tweeter. Together, these elements support a durable replacement-speaker design for everyday vehicle use.\u003c\/p\u003e\u003cp\u003eThe H7653 can be considered for vehicles with 6.5-inch speaker locations when the mounting cutout and behind-panel clearance are confirmed first. It works as a practical front-door or rear-deck upgrade and can be paired with an aftermarket head unit or amplifier matched to its 4-ohm load and RMS rating. For systems needing deeper low bass, a separate subwoofer remains the appropriate addition.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer, midrange, and tweeter elements into each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports amplifier or radio power matched to its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Load:\u003c\/strong\u003e Works with many standard car-audio speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Routes frequencies between the integrated speaker drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure for the speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Fitment:\u003c\/strong\u003e Designed for compatible 6.5-inch door or rear-deck locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H7653 uses a stamped-steel basket, ferrite ceramic magnet, polypropylene cone, treated-foam surround, and 1-inch voice coil. Its coaxial format places the additional midrange and high-frequency drivers over the main woofer, conserving space compared with a separate component-speaker layout. The speaker includes an internal crossover and uses a single 4-ohm voice coil.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's opening and clearance with the listed 5.7-inch (145 mm) mounting diameter and approximately 2.09-inch (53 mm) mounting depth. Mount the speaker securely to a flat baffle and seal around its frame to limit air leaks; check door-window travel before installation in a door. Use correct polarity and protect any new wiring with grommets where it passes through metal.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614853488710,"sku":"CER-H7653","price":88.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JI4nW0_8L.jpg?v=1784367856"},{"product_id":"cerwin-vega-h765c-6-5-2-way-component-speakers","title":"Cerwin-Vega H765C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe Cerwin-Vega H765C is a 6.5-inch, 2-way component speaker system designed to replace factory door or custom-location speakers. Its separate woofers and tweeters allow more flexible placement than a coaxial speaker, helping installers position high frequencies closer to the listener. It is intended for vehicle owners seeking a more detailed front-stage upgrade while retaining a conventional 4-ohm speaker load.\u003c\/p\u003e\u003cp\u003eEach side of the system combines a polypropylene woofer with a 1-inch PEI balanced-dome tweeter. This component layout separates midrange and high-frequency reproduction into dedicated drivers for clearer placement and tuning options. The published frequency response is 50 Hz to 20 kHz, covering the primary range used for music playback in a vehicle system.\u003c\/p\u003e\u003cp\u003eThe H765C is rated for 60 watts RMS and 400 watts maximum power handling per side. That makes it suitable for use with compatible factory-powered systems as well as aftermarket amplification matched appropriately to its 4-ohm impedance and RMS rating. Sensitivity is rated at 84.5 dB at 1 watt\/1 meter.\u003c\/p\u003e\u003cp\u003eIts woofer uses a polypropylene cone, treated-foam surround, stamped-steel basket, and ferrite magnet structure. The dedicated tweeter uses a PEI diaphragm and neodymium magnet. These materials support a practical replacement-speaker design focused on stable mounting and separate high-frequency placement.\u003c\/p\u003e\u003cp\u003eExternal crossover networks are included to divide the signal between the woofers and tweeters. The set can serve as a front-speaker upgrade in doors, kick panels, or custom installations where the published mounting dimensions are suitable. It can also be paired with a compatible rear-speaker upgrade, amplifier, and subwoofer system as part of a broader car-audio build.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component Set:\u003c\/strong\u003e Separate woofers and tweeters support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Dedicated drivers handle midrange and high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports power-matched factory or aftermarket system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cones:\u003c\/strong\u003e Provide a durable cone material for vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced-Dome Tweeters:\u003c\/strong\u003e Deliver dedicated high-frequency output through separate tweeters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct appropriate frequencies to each driver in the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H765C uses stamped-steel woofer baskets, polypropylene cones, treated-foam surrounds, ferrite woofer magnets, and neodymium tweeter magnets. Each woofer has a 1-inch voice coil, while the tweeters use PEI balanced-dome diaphragms. Grilles are included for installations where speaker protection or a finished appearance is needed.\u003c\/p\u003e\u003cp\u003eVerify vehicle fitment before purchase using the 5.7-inch mounting cutout requirement and published 2.45-inch mounting depth. The package includes two woofers, two tweeters, two external crossover networks, tweeter flush mounts, tweeter surface mounts, connection cables, and mounting hardware. For amplified use, select an amplifier and wiring configuration compatible with the system's 4-ohm impedance and 60-watt RMS-per-side rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614944845894,"sku":"CER-H765C","price":151.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91aPBrEKU0L.jpg?v=1784367897"},{"product_id":"cerwin-vega-sm65f4-6-5-2-way-marine-speakers","title":"Cerwin-Vega SM65F4 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Cerwin-Vega SM65F4 is a pair of 6.5-inch 2-way marine coaxial speakers designed for boats, motorcycles, and powersports applications. They provide a flush-mount audio upgrade where conventional interior speakers may not withstand moisture, sunlight, or outdoor exposure. The 4-ohm design suits systems using compatible marine or powersports amplifiers and source units.\u003c\/p\u003e\u003cp\u003eEach speaker combines a full-range woofer with a 25mm (1-inch) titanium dome tweeter. This 2-way arrangement is designed to cover midrange detail and high-frequency reproduction from a single mounting location. The Radial Zip Ring cone design is intended to support expanded high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe SM65F4 is rated for 125 watts RMS and 250 watts peak power handling per speaker. Its 92 dB sensitivity rating at 1W\/1m helps it produce useful output with appropriately matched amplification. A 4mm Xmax specification and Max Xmax suspension design support controlled cone travel.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the speaker uses a thermal-molded, UV-coated waterproof composite injection cone and a high-temperature injection-molded composite basket. Cerwin-Vega identifies the model as IP65 marine-grade compliant and 100% UV stable. These construction details are intended for installations exposed to water spray, dust, and sunlight.\u003c\/p\u003e\u003cp\u003eIntegrated digital RGB LED lighting adds illumination around the speaker for compatible marine and powersports builds. The speaker is a flush-mount model with a 5.63-inch mounting diameter and 2.56-inch mounting depth. It can be used as part of a full system with a compatible 4-ohm amplifier, source unit, wiring, and optional RGB lighting control equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines a woofer and titanium dome tweeter in one flush-mount speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25mm Titanium Dome Tweeter:\u003c\/strong\u003e Handles high-frequency detail in the coaxial speaker system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for higher-output marine and powersports systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine-Grade Compliance:\u003c\/strong\u003e Built for exposure to dust, water spray, and outdoor conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Coated Composite Cone:\u003c\/strong\u003e Helps the cone withstand prolonged outdoor and marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Digital RGB Lighting:\u003c\/strong\u003e Adds configurable lighting capability to compatible installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SM65F4 uses a ferrite magnetic motor, treated-cloth surround, high-temperature injection-molded composite basket, and thermal-molded UV-coated waterproof composite injection cone. Its titanium diaphragm material and 1.75-inch voice coil are paired with an internal 2-way speaker design. A grille is listed as optional.\u003c\/p\u003e\u003cp\u003eConfirm the available cutout and rear clearance before installation: the specified mounting diameter is 5.63 inches and mounting depth is 2.56 inches. Use compatible 4-ohm amplification and follow the vehicle, boat, or fairing manufacturer's mounting guidance. RGB lighting requires appropriate compatible control and wiring; Cerwin-Vega lists its RPMDLED multi-function digital RGB LED remote control as available.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45616814030918,"sku":"CER-SM65","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61zJ-xvqkNL.jpg?v=1784368882"},{"product_id":"cerwin-vega-v6525c-6-5-3-way-component-speakers","title":"Cerwin Vega V6525C 6.5\" 3-Way Component Speakers","description":"\u003cp\u003eThe Cerwin Vega V6525C is a 6.5-inch, 3-way component speaker system designed for vehicle owners replacing factory speakers with a more complete front-stage setup. It separates low, midrange, and high-frequency reproduction across dedicated drivers rather than combining them in one speaker. This configuration is suited to installations where clearer placement of vocals, instruments, and high frequencies is important.\u003c\/p\u003e\u003cp\u003eEach set combines 6.5-inch woofers, 2.5-inch midrange speakers, and 1-inch silk dome tweeters. The dedicated midrange driver helps cover the vocal and instrumental range while the separate tweeter handles upper-frequency detail. Passive crossover networks route the signal to the appropriate driver and include tweeter protection.\u003c\/p\u003e\u003cp\u003eThe V6525C is rated for 140 watts RMS and 420 watts maximum power handling, with a 4-ohm nominal impedance. Its specified frequency response is 89 Hz to 20 kHz, and sensitivity is rated at 88 dB at 1 watt\/1 meter. These ratings make it important to match the system with an appropriately configured source unit or amplifier.\u003c\/p\u003e\u003cp\u003eHybrid carbon fiber and polypropylene cones are used for the woofer and midrange drivers, while Santoprene rubber surrounds support driver excursion. The tweeters use dynamically balanced silk domes and neodymium magnets. A strontium ferrite woofer magnet and rigid stamped-steel basket support the main driver assembly.\u003c\/p\u003e\u003cp\u003eThis component set is intended for custom or upgraded vehicle speaker locations where separate woofer, midrange, tweeter, and crossover placement can be accommodated. The supplied fitment adapters and mesh steel grilles support installation flexibility. It can serve as the foundation of a front-speaker upgrade when paired with correct wiring, secure mounting, and amplifier power appropriate for its rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Way Component Layout:\u003c\/strong\u003e Separate woofer, midrange, and tweeter drivers cover distinct frequency ranges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W RMS Power Handling:\u003c\/strong\u003e Supports amplification matched to the system's continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Composite Cones:\u003c\/strong\u003e Carbon fiber and polypropylene cone construction supports responsive driver operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeters:\u003c\/strong\u003e Dynamically balanced 1-inch tweeters reproduce upper-frequency detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtected Passive Crossovers:\u003c\/strong\u003e Integrated crossovers divide frequencies and include tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Accessories Included:\u003c\/strong\u003e Mesh steel grilles and speaker fitment adapters are supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V6525C uses hybrid carbon fiber\/polypropylene cones, Santoprene rubber surrounds, neodymium tweeter magnets, strontium ferrite woofer magnets, and powder-coated stamped-steel baskets. The woofer measures 6.5 inches nominally and has a 1.79-inch mounting depth. Its listed cutout diameter is 4.88 inches, overall diameter is 6.26 inches, and overall height is 2.15 inches.\u003c\/p\u003e\u003cp\u003ePlan mounting locations for the 6.5-inch woofers, 2.5-inch midrange drivers, 1-inch tweeters, and two passive crossover networks before installation. Connect the amplifier or source output to the crossover input, then connect the labeled woofer, midrange, and tweeter outputs while observing polarity. For flush-mounted tweeters, the manual specifies a 1.85-inch round opening and at least 1 inch of clearance behind the panel.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45617949179974,"sku":"CER-V6525C","price":410.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61L5xDBTz1L.jpg?v=1784369568"},{"product_id":"cerwin-vega-v65c-6-5-2-way-component-speaker-set","title":"Cerwin-Vega V65C 6.5\" 2-Way Component Speaker Set","description":"\u003cp\u003eThe Cerwin-Vega V65C is a 6.5-inch, 2-way component speaker set designed to replace or upgrade factory vehicle speakers. Its separate woofer and tweeter layout helps place high frequencies where they are most useful in the cabin while retaining a conventional 6.5-inch woofer mounting format. It is intended for listeners who want a more detailed front-stage upgrade than a typical coaxial speaker arrangement.\u003c\/p\u003e\u003cp\u003eThis system uses a 6.5-inch woofer paired with a 1-inch silk dome tweeter. The component configuration is well suited to front-door installations where the woofer can remain low in the door and the tweeter can be mounted higher on a door panel, dash, or rear deck. An included passive crossover directs the appropriate frequencies to the woofer and tweeter.\u003c\/p\u003e\u003cp\u003eWith 140 watts RMS and 420 watts maximum power handling, the V65C is specified for systems using a compatible 4-ohm factory or aftermarket audio source. Its 88 dB sensitivity and 89 Hz to 20 kHz frequency response describe a balanced full-range role, with lower bass support best handled by a dedicated subwoofer when deeper low-frequency output is desired. The 92 Hz free-air resonance is also specified by the manufacturer.\u003c\/p\u003e\u003cp\u003eThe woofer uses a hybrid carbon fiber\/polypropylene cone and a Santoprene rubber surround. Cerwin-Vega pairs this with a strontium ferrite woofer magnet and a powder-coated, rigid stamped-steel basket. The 1-inch dynamically balanced silk dome tweeter uses a neodymium magnet to reproduce upper-frequency detail.\u003c\/p\u003e\u003cp\u003eThe V65C fits a broad range of custom and replacement speaker projects when vehicle clearance is verified before installation. Its 4.88-inch cutout requirement, 1.79-inch mounting depth, and 6.26-inch overall woofer diameter provide useful fitment references. Mesh steel grilles and speaker fitment adapters are included for added installation flexibility.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separates woofer and tweeter placement for a more configurable installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Woofer:\u003c\/strong\u003e Fits the common 6.5-inch speaker category with verified mounting dimensions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Silk Dome Tweeter:\u003c\/strong\u003e Handles high frequencies with a dynamically balanced silk dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone:\u003c\/strong\u003e Carbon fiber and polypropylene construction supports accurate midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Crossover:\u003c\/strong\u003e Routes signals between the woofer and tweeter and includes tweeter protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Installation Accessories:\u003c\/strong\u003e Mesh steel grilles and speaker fitment adapters are supplied.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V65C combines a hybrid carbon fiber\/polypropylene woofer cone with a Santoprene rubber surround, strontium ferrite woofer magnet, and powder-coated stamped-steel basket. Its silk dome tweeter uses a neodymium magnet, while the component system uses an outboard passive crossover with tweeter protection. The set is sold as a pair and includes mesh steel grilles and speaker fitment adapters.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available speaker opening, mounting depth, and window clearance before installation. The woofer requires a 4.88-inch cutout and 1.79 inches of mounting depth; its overall diameter is 6.26 inches. For flush tweeter mounting, the installation guide specifies a 1.85-inch opening and at least 1 inch of clearance behind the panel; wire the amplifier or source to the crossover input, then connect its midrange and tweeter outputs with correct polarity.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45618022907974,"sku":"CER-V65C","price":315.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Vf3fzd7lL.jpg?v=1784369605"},{"product_id":"cerwin-vega-xed62-6-5-2-way-coaxial-car-speakers","title":"Cerwin-Vega XED62 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Cerwin-Vega XED62 is a 6.5-inch 2-way coaxial speaker system designed to replace worn or basic factory speakers in compatible vehicle locations. It combines the woofer and tweeter in one assembly, simplifying an upgrade for door or rear-deck applications. The 4-ohm design is suited to typical car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers seeking more defined full-range playback from a straightforward speaker replacement. The polypropylene cone handles the main vocal and midrange region, while the balanced metal dome tweeter adds high-frequency detail. An internal crossover divides frequencies between the two drivers without requiring a separate external crossover box.\u003c\/p\u003e\u003cp\u003eThe XED62 is rated for 35 watts RMS and 300 watts maximum power handling. Its specified 50 Hz to 20 kHz frequency response supports a broad portion of the audible range for everyday music and spoken-word listening. It can be used with a factory head unit or an appropriately matched aftermarket amplifier.\u003c\/p\u003e\u003cp\u003eA stamped-steel basket provides the speaker's mounting structure, while the ferrite ceramic magnet supports the motor assembly. The treated foam surround is paired with the polypropylene cone for controlled cone movement. A 1-inch voice coil is specified for the woofer assembly.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the XED62 can serve as a replacement for compatible 6.5-inch factory speakers before or alongside a receiver or amplifier upgrade. Its 2.2-inch mounting depth and 4.96-inch mounting diameter should be checked against the vehicle's available mounting space. Speaker grilles are included for installations where they are needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Size:\u003c\/strong\u003e Fits many common vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Crossover:\u003c\/strong\u003e Directs appropriate frequencies to each driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Supports clear midrange and midbass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Metal Dome Tweeter:\u003c\/strong\u003e Adds high-frequency detail to the presentation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Speaker Grilles:\u003c\/strong\u003e Provides protection for exposed mounting locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XED62 uses a polypropylene cone, treated foam surround, aluminum tweeter diaphragm, stamped-steel basket, and ferrite ceramic magnet. This combination is built for standard in-vehicle speaker use. The integrated coaxial layout keeps the tweeter centered within the woofer assembly.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's mounting opening, mounting depth, screw pattern, and panel clearance before purchase. The specified mounting diameter is 4.96 inches and mounting depth is 2.2 inches, so adapters may be necessary in some vehicles. Observe correct speaker polarity and use a secure, sealed mounting surface to help prevent air leaks around the frame.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45620786004038,"sku":"CER-XED62","price":58.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61YpEt2PzBL.jpg?v=1784371196"},{"product_id":"cerwin-vega-xed650c-6-5-2-way-component-speakers","title":"Cerwin-Vega XED650C 6.5\" 2-Way Component Speakers","description":"\u003cp\u003eThe Cerwin-Vega XED650C is a 6.5-inch, 2-way component speaker system designed to replace factory door or rear-deck speakers with separately mounted woofers and tweeters. Its component layout lets the midrange drivers and high-frequency drivers be positioned independently, helping accommodate more customized vehicle installations. This set is intended for wired car-audio systems and uses external passive crossover networks.\u003c\/p\u003e\u003cp\u003eFor drivers seeking a practical front-stage upgrade, the XED650C combines 6.5-inch curvilinear polypropylene midrange woofers with separate balanced metal dome tweeters. The separate tweeters can be flush or surface mounted, allowing installation locations such as dash, door, or rear-deck panels when vehicle space permits. This flexibility can be useful when replacing a coaxial setup with a component system.\u003c\/p\u003e\u003cp\u003eThe system is rated for 30 watts RMS and 300 watts maximum power handling, with a 4-ohm impedance and 93 dB sensitivity. Its published frequency response is 60 Hz to 18 kHz. These specifications make it suitable for use with compatible factory or aftermarket amplified speaker outputs, provided the system is wired through the included crossovers.\u003c\/p\u003e\u003cp\u003eThe woofers use curvilinear polypropylene cones, butyl rubber surrounds, linear woven treated red spiders, and black-coated stamped-steel baskets. These materials support a conventional mobile-audio speaker design focused on everyday in-vehicle use. The balanced metal dome tweeters handle the high-frequency portion of the system through the external crossover network.\u003c\/p\u003e\u003cp\u003eThe XED650C is supplied as a component set with two woofers, two tweeters, crossover networks, grilles, and mounting hardware. It can serve as a direct component-system replacement where the vehicle has adequate mounting space, or as part of a broader audio upgrade that includes an aftermarket amplifier, sound treatment, and vehicle-specific mounting adapters. Verify vehicle fitment, mounting clearance, and wiring requirements before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Design:\u003c\/strong\u003e Separates the woofers and tweeters for flexible placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Woofers:\u003c\/strong\u003e Sized for many common car-speaker upgrade locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Crossovers:\u003c\/strong\u003e Direct frequencies to the appropriate woofer or tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cones:\u003c\/strong\u003e Curvilinear woofer cones support midrange and mid-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surrounds:\u003c\/strong\u003e Provide a durable flexible edge around each woofer cone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Dome Tweeters:\u003c\/strong\u003e Separate balanced dome tweeters reproduce high-frequency detail.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XED650C woofers use black-coated stamped-steel baskets with curvilinear polypropylene cones, butyl rubber surrounds, and linear woven treated red spiders. Separate balanced metal dome tweeters are used with high-grade external passive crossover networks. Grilles and mounting hardware are included with the set.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle has room for the 4.96-inch woofer cutout and 2.2-inch mounting depth before ordering. The manual specifies wiring the amplifier or head-unit speaker output to each crossover's AMP input, then connecting MID to the woofer and TWT to the tweeter with correct polarity. For flush-mounted tweeters, the manual calls for a 1.75-inch opening and at least 1 inch of clearance behind the panel; mount crossovers in a protected, well-ventilated location away from moisture.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45620877721670,"sku":"CER-XED650C","price":82.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61CnPYWOz-L.jpg?v=1784371252"},{"product_id":"crunch-cs653-6-5-3-way-coaxial-car-speakers","title":"Crunch CS653 6.5\" 3-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Crunch CS653 is a pair of 6.5-inch, 3-way coaxial car speakers designed to replace worn or limited factory speakers. Their all-in-one coaxial layout places the high-frequency element within the speaker assembly, helping simplify an everyday door or rear-deck audio upgrade. They are intended for universal vehicle applications, subject to confirming physical fitment in the vehicle.\u003c\/p\u003e\u003cp\u003eWith a published 4-ohm impedance, the CS653 is suited to common automotive speaker circuits. Crunch lists 150 watts RMS and 300 watts peak power handling for this model. The speaker uses a 1-inch Neo-Mylar soft-dome tweeter to reproduce upper-frequency detail alongside its 6.5-inch main driver.\u003c\/p\u003e\u003cp\u003eThe Silver Alpha-Cellulose Poly cone is designed to provide the midrange and mid-bass foundation of the speaker. A UV-resistant rubber surround supports cone movement and is paired with high-temperature adhesive at the cone-surround connection. This combination is intended for the temperature changes and vibration common in vehicle interiors.\u003c\/p\u003e\u003cp\u003eCrunch equips the CS653 with a pure-copper voice coil on a Kapton former, plus an over-coil ventilation arrangement through the spider. The design also uses an epoxy-infused natural-fiber spider for suspension support. A passive internal crossover directs frequencies between the main driver and tweeter elements.\u003c\/p\u003e\u003cp\u003eThese speakers can serve as a practical front- or rear-location upgrade in a factory-replacement system, or as part of a larger system with an appropriate amplifier. Check the vehicle's mounting opening, available depth, and panel clearance before installation. Grilles are included for installations where the speakers are not protected by an existing vehicle panel.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines multiple driver elements in each speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Size:\u003c\/strong\u003e Fits many common door and rear-deck locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeo-Mylar Tweeter:\u003c\/strong\u003e Uses a 1-inch soft-dome high-frequency driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Poly Cone:\u003c\/strong\u003e Supports midrange and mid-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Rubber Surround:\u003c\/strong\u003e Helps support long-term cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Internal Crossover:\u003c\/strong\u003e Separates frequencies within the coaxial speaker assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS653 uses an anti-resonant stamped-steel basket, ferrite magnet motor, textured ABS gasket, and a black finish. Its pure-copper voice coil uses a Kapton former, while the tweeter also uses a Kapton-based construction. The included grilles can help protect exposed speakers from accidental contact.\u003c\/p\u003e\u003cp\u003eConfirm a 5.59-inch cutout, 7.01-inch outside diameter, and 2.13-inch mounting-depth clearance before ordering. Use the supplied speaker connection cables or connect with suitable spade terminals or direct soldering, observing vehicle polarity. Mounting hardware, grilles, and connection cables are included; vehicle-specific adapters or wiring harnesses may be needed depending on the installation location.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45622577954886,"sku":"CS653","price":38.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/814IuFVojgL.jpg?v=1784372191"},{"product_id":"gravity-gr-1686h-6-5-2-way-coaxial-car-speakers","title":"Gravity GR-1686H 6.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Gravity GR-1686H is a pair of 6.5-inch 2-way coaxial car speakers designed to replace worn or basic factory door speakers. It provides a straightforward upgrade path for vehicles that accept 6.5-inch speakers. Its full-range coaxial format combines the woofer and tweeter into each speaker assembly for simplified installation.\u003c\/p\u003e\u003cp\u003eWith 230 watts maximum power handling per pair, the GR-1686H is intended for everyday in-car listening with either a compatible factory radio or an appropriately matched aftermarket system. The 4-ohm impedance supports common automotive speaker applications. Its 90 dB sensitivity rating is specified for efficient output from modest power sources.\u003c\/p\u003e\u003cp\u003eThe speaker uses a Nomex and silk cone woofer construction to support controlled midrange and low-frequency reproduction. A soft-dome tweeter is integrated into the coaxial design to reproduce upper-frequency detail. The specified 60 Hz to 20 kHz frequency response covers the core range of music, speech, and general entertainment playback.\u003c\/p\u003e\u003cp\u003eA 15-ounce magnet and 25 mm voice coil are specified for the GR-1686H. These components form the motor and moving-coil structure that drives the speaker cone. The design is suited to replacement and entry-level custom car-audio installations where space is limited.\u003c\/p\u003e\u003cp\u003eThe GR-1686H is a practical choice for cars, trucks, and SUVs with compatible 6.5-inch speaker locations. It can be used as a direct speaker replacement or as part of a broader system upgrade with a compatible head unit or amplifier. Confirm vehicle mounting dimensions, connector fitment, and available mounting depth before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter functions in each speaker for a compact full-range replacement solution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Speaker Design:\u003c\/strong\u003e Separates low\/midrange and high-frequency reproduction through dedicated driver elements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e230W Maximum Handling:\u003c\/strong\u003e Provides a stated maximum power capacity of 230 watts per pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNomex And Silk Cone:\u003c\/strong\u003e Uses the specified cone materials for responsive everyday music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports useful output with compatible factory radios and moderate aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common nominal impedance used by many automotive audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-1686H uses a 15-ounce magnet and 25 mm voice coil in a compact 6.5-inch speaker platform. Its coaxial layout places the tweeter within the woofer assembly, helping it fit applications where separate component-speaker mounting locations are not available. Spade-style speaker terminals are specified for connection.\u003c\/p\u003e\u003cp\u003eVerify that the vehicle accepts 6.5-inch speakers and confirm mounting depth, cutout diameter, screw locations, and door-panel clearance before purchasing. Use vehicle-specific adapter brackets or wiring harnesses when required, and match the speakers to a compatible 4-ohm radio or amplifier output. Product listings identify a pair of speakers with speaker wire, screws, and a user manual; contents should be checked upon receipt.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627421130822,"sku":"GR-1686H","price":47.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61MHu1k21BL.jpg?v=1784375354"},{"product_id":"gravity-mg660-lbk-6-5-2-way-marine-speakers","title":"Gravity MG660-LBK 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Gravity MG660-LBK is a pair of 6.5-inch two-way marine speakers designed for audio systems exposed to water, weather, and open-air use. It provides a practical replacement or upgrade option for boats, personal watercraft, and off-road vehicles that use a standard-size speaker location. The pair combines full-range speaker playback with integrated blue LED illumination.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners who want music in marine and outdoor vehicle applications without using conventional interior-only speakers. Their weather-resistant, waterproof-listed construction is made to handle heavy water splashes and outdoor conditions. The 6.5-inch format supports installation in many common OEM-style speaker positions, subject to verifying the actual opening and available mounting clearance.\u003c\/p\u003e\u003cp\u003eThe MG660-LBK uses a two-way speaker layout to cover both lower and higher portions of the audible range from each location. Gravity lists 350 watts of advertised power for the pair, though it does not publish an RMS rating or a power-rating test standard for this model. Match the speakers with a compatible marine or vehicle audio source and avoid relying on an unconfirmed continuous-power figure when selecting an amplifier.\u003c\/p\u003e\u003cp\u003eBuilt-in blue LED lighting adds visual accent lighting around the speaker area for marine and outdoor installations. This makes the speakers suitable for systems where lighting is part of the overall vessel or powersports presentation. The lighting feature should be connected and protected according to the vehicle's electrical system requirements.\u003c\/p\u003e\u003cp\u003eA low-profile design helps the MG660-LBK fit installations where rear-panel space is limited. It can be used as a direct replacement where fitment is confirmed, or as part of a larger system with a marine receiver, external amplifier, and additional speakers. Confirm mounting dimensions, wiring requirements, and speaker impedance before installation because detailed manufacturer installation specifications are not published for this SKU.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Size:\u003c\/strong\u003e Fits many standard marine and vehicle speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Design:\u003c\/strong\u003e Combines full-range playback from each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof Listing:\u003c\/strong\u003e Intended for wet marine and outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather Resistance:\u003c\/strong\u003e Built to handle water splashes and outdoor exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Adds illuminated styling to compatible installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Profile Form:\u003c\/strong\u003e Helps support installations with limited mounting space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MG660-LBK is a white marine speaker pair with a slim, low-profile exterior intended for exposed recreational-vehicle environments. Its listed waterproof and weather-resistant characteristics are intended for marine, watercraft, and off-road applications. No IP rating, cone material, grille material, or basket material has been published for the exact UPC-listed product.\u003c\/p\u003e\u003cp\u003eBefore mounting, compare the existing opening, screw pattern, and rear clearance with the actual speakers, since detailed cutout and mounting-depth figures are not published. Connect each speaker with correct positive and negative polarity to a compatible audio system, and plan separate protected wiring as needed for the LED lighting. These speakers are best used in boats, marine watercraft, and off-road vehicles where a 6.5-inch OEM-style replacement size is appropriate.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45630589075526,"sku":"MG660-LBK","price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/812zgGkLZWL.jpg?v=1784377323"},{"product_id":"gravity-mg670-lw-6-5-2-way-marine-speakers","title":"Gravity MG670-LW 6.5\" 2-Way Marine Speakers","description":"\u003cp\u003eThe Gravity MG670-LW is a pair of 6.5-inch 2-way marine speakers designed for boat, watercraft, and outdoor vehicle audio installations. They provide a compact replacement option where conventional vehicle speakers may be exposed to splashes, sun, and changing weather. The black low-profile format is intended for installations that need a standard-size marine speaker.\u003c\/p\u003e\u003cp\u003eThese speakers are suited to users upgrading sound on boats, personal watercraft, and off-road vehicles. Their 4-ohm impedance is compatible with common mobile-audio speaker systems. The pair is listed with a 350-watt maximum power rating, while an RMS rating is not specified in the available product information.\u003c\/p\u003e\u003cp\u003eThe MG670-LW uses a 2-way design to cover a broader range than a single-driver speaker. Available specifications list an 80 Hz to 20 kHz frequency response and 88 dB sensitivity. This gives the speakers a practical full-range role in a marine or outdoor stereo system.\u003c\/p\u003e\u003cp\u003eFor environmental durability, the speakers are described as waterproof and weather resistant, with UV protection also specified for the MG670-LW. Built-in blue LED illumination adds a visible accent around the speaker installation. No IP rating or LED wiring specification is published.\u003c\/p\u003e\u003cp\u003eThe MG670-LW can be used as a direct-size upgrade in installations designed around 6.5-inch speakers, subject to verifying the mounting opening and clearance. Its 60 mm mounting depth and spade-style terminals support straightforward planning before installation. Pair it with a compatible marine-capable stereo or external amplifier and appropriate wiring for the application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Pair:\u003c\/strong\u003e Includes two matching marine speakers for a stereo installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Design:\u003c\/strong\u003e Supports full-range sound reproduction from each speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Construction:\u003c\/strong\u003e Intended for exposed boat and outdoor vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Integrated illumination adds a visible accent to the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Fits common mobile and marine speaker-system configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpade Terminals:\u003c\/strong\u003e Provides a simple connection point for speaker wiring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MG670-LW combines a black low-profile exterior with a plastic outer construction, UV protection, and water-resistant design. It uses a 10-ounce magnet and an anti-resonant stamped basket. The built-in blue LEDs complement marine, watercraft, and off-road installations without changing the speaker's 6.5-inch form factor.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting location accepts a 6.5-inch speaker and provides at least 60 mm of mounting depth before cutting or fastening. Connect speaker leads to the spade terminals and plan LED wiring according to the vehicle's electrical system; LED wiring details are not published. Use the pair with compatible 4-ohm marine audio equipment, and protect all connections appropriately for the installation environment.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45630655463494,"sku":"MG670-LW","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/91vvdJ8vU6S.jpg?v=1784377363"},{"product_id":"gravity-mg680-lw-6-5-2-way-marine-speakers-with-blue-leds","title":"Gravity MG680-LW 6.5\" 2-Way Marine Speakers with Blue LEDs","description":"\u003cp\u003eThe Gravity MG680-LW is a pair of 6.5-inch, 2-way marine speakers designed for wired audio systems in boats, personal watercraft, and off-road vehicles. It provides a replacement option for worn or basic factory speakers where moisture resistance and a compact mounting profile are important. The white finish is suited to marine interiors and exterior panels.\u003c\/p\u003e\u003cp\u003eEach pair is specified with a 350-watt peak power rating, 4-ohm impedance, 88 dB sensitivity, and an 80 Hz to 20 kHz frequency response. This combination is intended for use with a compatible marine stereo or external amplifier that supports 4-ohm speakers. The 2-way design combines a 6.5-inch woofer with a 1-inch tweeter for full-range playback.\u003c\/p\u003e\u003cp\u003eBuilt-in blue LED illumination adds accent lighting around the speakers for nighttime boating or powersports use. The LEDs are integrated into the speaker assembly, so they should be connected as part of a properly planned installation. This makes the pair a practical choice for systems that combine sound reproduction with visible marine-style lighting.\u003c\/p\u003e\u003cp\u003eThe MG680-LW uses a water-resistant, weather-resistant design with UV protection for outdoor installations exposed to splashes and changing conditions. Its anti-resonant stamped basket is designed to support the speaker assembly, while spade terminals simplify connection to conventional speaker wiring. The listed 60 mm mounting depth supports installations where rear-panel clearance is limited.\u003c\/p\u003e\u003cp\u003eThese speakers can be used as a pair in a new marine audio installation or as replacements in compatible 6.5-inch OEM-style locations. They are intended to connect to an external audio source or amplifier; they do not function as a standalone Bluetooth speaker system. Confirm cutout size, mounting depth, wiring access, and available clearance before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch 2-Way Design:\u003c\/strong\u003e Combines a woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350-Watt Peak Rating:\u003c\/strong\u003e Provides the listed peak handling for the pair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible marine stereo or amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue LED Lighting:\u003c\/strong\u003e Adds integrated blue accent illumination around each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather-Resistant Construction:\u003c\/strong\u003e Supports use in marine and outdoor vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60 mm Mounting Depth:\u003c\/strong\u003e Helps fit installations with limited rear clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MG680-LW has a white, low-profile marine-speaker design with UV protection, water-resistant construction, and an anti-resonant stamped basket. It uses a 6.5-inch woofer, 1-inch tweeter, and built-in blue LED lighting. The speakers are sold as a pair for stereo installation.\u003c\/p\u003e\u003cp\u003eMount the speakers on a flat panel with at least 60 mm of depth behind the mounting surface, allowing additional clearance for wiring. Connect the speaker leads to a compatible 4-ohm stereo or amplifier using the spade terminals, observing polarity. Verify the vehicle's cutout size and plan separate wiring as needed for the integrated LED lighting before drilling or fastening the speakers.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45630721884230,"sku":"MG680-LW","price":55.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71VoXaylYdL.jpg?v=1784377410"},{"product_id":"gravity-sgr654-6-5-4-way-full-range-car-speakers","title":"Gravity SGR654 6.5\" 4-Way Full-Range Car Speakers","description":"\u003cp\u003eThe Gravity SGR654 is a pair of 6.5-inch full-range car speakers intended for vehicles that use this common speaker size. Their 4-way design combines multiple sound-producing elements in each speaker to cover a broad portion of the audible range. They are a practical option for replacing worn factory speakers or building an entry-level car-audio system.\u003c\/p\u003e\u003cp\u003eThese speakers are specified with a 60 Hz to 20 kHz frequency response, supporting bass, midrange, and high-frequency content within one coaxial-style assembly. A 92 dB sensitivity specification indicates they are designed to produce useful output without requiring unusually high amplifier power. The 4-ohm impedance suits many conventional car-audio amplifiers and compatible head-unit speaker outputs.\u003c\/p\u003e\u003cp\u003eGravity rates the SGR654 at up to 400 watts maximum per speaker, or 800 watts maximum for the pair. Maximum-power figures are not the same as continuous RMS ratings, so amplifier selection should be based on conservative gain setting and clean, unclipped output. Proper power matching is especially important when using an external amplifier.\u003c\/p\u003e\u003cp\u003eThe speaker uses a moisture-resistant rubber surround and an anti-resonant stamped-steel basket. These construction details are intended to help the assembly tolerate vibration and typical automotive environmental conditions. Spade-style speaker terminals provide a straightforward connection point for vehicle speaker wiring.\u003c\/p\u003e\u003cp\u003eWith a listed mounting depth of 2-7\/8 inches, the SGR654 should be measured against the available clearance behind the intended mounting location before installation. It can be used as a pair for front or rear speaker replacement where fitment permits. For a more complete system, it can be paired with a compatible amplifier, wiring, and a separate subwoofer if additional low-bass output is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Speaker Size:\u003c\/strong\u003e Fits applications designed for 6.5-inch speakers when mounting clearance permits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Way Full-Range Design:\u003c\/strong\u003e Uses a multi-element design to reproduce a broad frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800-Watt Pair Maximum:\u003c\/strong\u003e The pair is specified for up to 800 watts maximum power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many compatible car stereo and amplifier speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture-Resistant Rubber Surround:\u003c\/strong\u003e Helps support durability in automotive listening environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a rigid mounting structure intended to limit unwanted resonance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe SGR654 combines a stamped-steel basket with a moisture-resistant rubber surround and a 2-3\/8-inch voice coil specification. Its listed magnet size is 3-1\/8 inches, and the speaker is specified at 92 dB sensitivity. The compact full-range format keeps the sound-producing elements together in a single 6.5-inch speaker assembly.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6.5-inch speaker and has at least 2-7\/8 inches of mounting-depth clearance before purchase. Connect the speakers with correct polarity using the spade terminals, secure them with suitable vehicle-specific hardware, and set amplifier gain carefully to avoid distortion. Mounting adapters, harness adapters, wiring, and other installation parts may be required depending on the vehicle.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45631366365254,"sku":"SGR654","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_d11b70d8-f432-4a47-9a0c-1a90728d6cca.jpg?v=1784377790"},{"product_id":"hertz-ck-165-6-5-two-way-component-speaker-system","title":"Hertz CK 165 6.5\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CK 165 is a 6.5-inch two-way component speaker system designed for vehicle owners replacing factory front speakers with separate woofers, tweeters, and passive crossovers. Separating the high-frequency drivers from the door woofers gives installers more flexibility to position the tweeters near the listening area. The system is rated at 95 watts continuous and uses a 4-ohm nominal impedance.\u003c\/p\u003e\u003cp\u003eThis kit is suited to listeners seeking a more detailed front soundstage than a conventional coaxial speaker can provide. Its 26 mm Tetolon dome tweeters are engineered for natural medium- and high-frequency reproduction, while the 165 mm woofers handle the lower and midrange registers. The stated system frequency response is 55 Hz to 22.5 kHz.\u003c\/p\u003e\u003cp\u003eThe C 165 woofers use Hertz SPP-M semi-pressed paper-mica cones, combining semi-pressed paper with mica powder for a balance of low mass and damping. A high-density-flux ferrite motor and low-carbon polar plates support woofer control and reduced distortion at higher power levels. Each woofer uses a 25 mm voice coil on an aluminum former.\u003c\/p\u003e\u003cp\u003eFor the upper range, the C 26 tweeter uses a 26 mm soft Tetolon fiber dome, a 20 mm voice coil, and a neodymium magnet. Its faceplate geometry is optimized for off-axis installations, which is relevant when tweeters must be mounted in factory sail panels, dashboards, or other angled locations. The supplied passive crossover divides the system at 2.5 kHz with 12 dB-per-octave high-pass filtering.\u003c\/p\u003e\u003cp\u003eThe included CCX 2 crossover provides a selectable tweeter output level of 0 dB or +3 dB, allowing the high-frequency balance to be adjusted for vehicle acoustics and mounting position. CK 165 can be used with a compatible factory-radio upgrade or an external amplifier that is appropriate for its 4-ohm load and power rating. It is intended as a component-system upgrade, rather than a single drop-in coaxial replacement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers and tweeters support flexible driver placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cones:\u003c\/strong\u003e Paper-mica cones balance damping and rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeters:\u003c\/strong\u003e Soft 26 mm domes reproduce upper frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive CCX 2 Crossover:\u003c\/strong\u003e Directs frequencies to the appropriate driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Select 0 dB or +3 dB output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles:\u003c\/strong\u003e Supplied ABS-and-metal-mesh grilles protect the woofers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C 165 woofer combines a semi-pressed paper-mica cone, ferrite magnet, aluminum voice-coil former, compact three-spoke basket, and rubber magnet cover. The C 26 tweeter uses a neodymium motor and soft Tetolon dome. Supplied CG 165 grilles use a high-resistance ABS structure with a metallic finish and removable metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm available door-panel clearance before installation: the C 165 woofer has a 142 mm mounting diameter and 62.5 mm mounting depth. Route the amplifier or head-unit speaker output to each CCX 2 crossover, then connect its woofer and tweeter outputs to their corresponding drivers with correct polarity. The C 26 supports flush, angled, and OEM-location mounting options, and Hertz illustrates a suggested equal-distance tweeter layout for display-style or in-car placement.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631721078854,"sku":"CK165","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81rrN0TWZTL.jpg?v=1784378581"},{"product_id":"hertz-ck-165-f-6-5-shallow-component-speaker-system","title":"Hertz CK 165 F 6.5\" Shallow Component Speaker System","description":"\u003cp\u003eThe Hertz CK 165 F is a 6.5-inch, two-way component speaker system designed for vehicle locations where conventional replacement speakers may be too deep. Its flat-profile C 165 F woofers are intended to simplify upgrades in shallow factory door and panel locations. The kit combines separate woofers, tweeters, and passive crossovers for a more flexible installation than a coaxial speaker arrangement.\u003c\/p\u003e\u003cp\u003eThis system is suited to listeners replacing factory speakers while retaining practical fitment in vehicles with limited mounting depth. The 4-ohm system is rated for 90 watts continuous power handling and 270 watts peak power, making it appropriate for compatible aftermarket amplification or a capable factory or aftermarket radio. Its 93 dB SPL sensitivity supports efficient output from modest-power systems.\u003c\/p\u003e\u003cp\u003eThe C 165 F woofer uses an SPP-M semi-pressed paper cone reinforced with mica, balancing low moving mass with controlled rigidity. Its shallow basket and optimized moving assembly help address limited-depth installations without changing the basic 6.5-inch format. The woofer uses a high-density ferrite magnet and a pure-copper voice coil on an aluminum former.\u003c\/p\u003e\u003cp\u003eFor upper-frequency reproduction, the CK 165 F includes separate C 26 tweeters with 26 mm soft Tetolon domes and neodymium magnets. The tweeter design is intended to provide detailed, natural high-frequency reproduction, while the separate placement can help installers aim the high frequencies more effectively. The complete system covers a specified 65 Hz to 22.5 kHz frequency range.\u003c\/p\u003e\u003cp\u003eCompact CCX 2 passive crossovers divide frequencies between the woofer and tweeter at 2.5 kHz with a 12 dB-per-octave slope. The crossover provides 0 dB and +3 dB tweeter-level settings to help balance the high frequencies for the installation location. This makes the CK 165 F a practical front-stage upgrade when shallow 6.5-inch woofer fitment and separately mounted tweeters are desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Profile Woofers:\u003c\/strong\u003e Reduced-depth baskets support installation in constrained factory speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers allow flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cones:\u003c\/strong\u003e Mica-reinforced semi-pressed paper supports rigidity and controlled response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeters:\u003c\/strong\u003e Soft 26 mm domes reproduce upper-frequency detail naturally.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCX 2 Passive Crossovers:\u003c\/strong\u003e External crossovers manage frequency division at 2.5 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter-Level Adjustment:\u003c\/strong\u003e Selectable 0 dB or +3 dB output helps tailor treble balance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C 165 F woofer uses a high-density ferrite magnet, low-carbon pole plates, and a 25 mm pure-copper voice coil wound on an aluminum former. Its semi-pressed paper-mica cone is paired with a shallow basket profile, while the C 26 tweeter uses a Tetolon dome, 20 mm voice coil, and neodymium magnet. Included woofer grilles use an ABS frame with a metal mesh grille for speaker protection.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, available depth, mounting-hole pattern, and factory wiring before installation. The woofer's listed mounting depth is 43.5 mm (1.71 inches), while the external crossovers require a secure, dry mounting location and wiring from the amplifier or head unit to each crossover. Use the supplied tweeter mounting hardware as appropriate, observe polarity markings, and select the crossover tweeter level after listening from the driver's seat.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631721144390,"sku":"CK165F","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81q-YwVVetL.jpg?v=1784378630"},{"product_id":"hertz-ck165l-6-5-2-way-component-speaker-system","title":"Hertz CK165L 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CK165L is a 6.5-inch, 2-way component speaker system designed for vehicle audio upgrades where separate woofers and tweeters are preferred over factory full-range speakers. Its 4-ohm design suits many aftermarket amplifiers and compatible factory-replacement installations. The system pairs C 165 L woofers with C 26 dome tweeters and dedicated passive crossover networks.\u003c\/p\u003e\u003cp\u003eThis kit is intended for listeners seeking a more defined front soundstage, with bass and midrange handled by door-mounted woofers and high frequencies placed separately. The 165 mm woofers use non-pressed paper cones to provide controlled low-frequency response. A 26 mm Tetolon fiber tweeter supports detailed upper-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe CK165L is rated for 100 watts continuous power handling and 300 watts peak power handling. Its complete system frequency response is specified at 50 Hz to 22.5 kHz. Woofer sensitivity is rated at 91 dB SPL, while tweeter sensitivity is rated at 92 dB SPL.\u003c\/p\u003e\u003cp\u003eHertz uses a high-density-flux ferrite motor with low-carbon polar plates on the C 165 L woofer. Its 25 mm voice coil is wound on an aluminum former and is designed for extended excursion. The woofer also uses a three-spoke basket and rubber magnet cover to help control unwanted mechanical vibration.\u003c\/p\u003e\u003cp\u003eSeparate CCX 2W and CCX 2T crossovers simplify placement compared with a single large network. The woofer network uses a 6 dB-per-octave low-pass section, while the tweeter network uses a 12 dB-per-octave high-pass section. This makes the CK165L a practical component-system upgrade for installations with suitable door locations, tweeter locations, and amplifier or receiver power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Pressed Paper Woofer Cone:\u003c\/strong\u003e Helps deliver natural midrange and controlled low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e Soft 26 mm dome reproduces detailed high frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate Passive Crossovers:\u003c\/strong\u003e Compact woofer and tweeter filters simplify system routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Tweeter Level:\u003c\/strong\u003e Choose 0 dB or +3 dB treble attenuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grilles Included:\u003c\/strong\u003e Supplied ABS grilles add protection for exposed woofer installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe C 165 L woofer combines a water-repellent non-pressed paper cone, high-density-flux ferrite magnet, low-carbon polar plates, and a 25 mm aluminum-former voice coil. The C 26 tweeter uses a Tetolon fiber dome and neodymium magnet. Hertz also supplies high-resistance ABS grilles with a metallic finish and removable metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm available door-panel clearance and mounting opening dimensions before purchase. The woofer requires a 142 mm mounting hole and 62.5 mm mounting depth, while the C 26 tweeter supports OEM, flush, or angled mounting approaches with its installation accessories. Connect the amplifier or head-unit speaker output to the separate crossover inputs, then route each crossover output only to its designated woofer or tweeter.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631721177158,"sku":"CK165L","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81cePpoRACL.jpg?v=1784378681"},{"product_id":"hertz-cpk-165-6-5-two-way-component-speaker-system","title":"Hertz CPK 165 6.5\" Two-Way Component Speaker System","description":"\u003cp\u003eThe Hertz CPK 165 is a 6.5-inch two-way component speaker system designed for car audio upgrades that separate the woofer and tweeter for more flexible placement. It combines CP 165 woofers, CP 25 dome tweeters, and CPCX 2 passive crossover networks. The system is intended for vehicles where improved front-stage detail and clearer placement of high frequencies are desired.\u003c\/p\u003e\u003cp\u003eWith 105 watts continuous power handling, 315 watts peak power handling, and a 4-ohm nominal impedance, the CPK 165 is suited to compatible aftermarket amplification or a properly matched factory-upgrade system. Its published frequency response is 45 Hz to 22.5 kHz, covering midbass through upper-frequency detail. The 92.5 dB SPL sensitivity rating supports efficient output from a suitably matched amplifier.\u003c\/p\u003e\u003cp\u003eThe CP 165 woofer uses a pressed-paper cone with FEM-optimized geometry and a butyl-rubber surround. Its high-density ferrite magnet and low-carbon pole plates are designed to maintain control at higher power levels. A 25 mm pure-copper voice coil supports the woofer's moving assembly.\u003c\/p\u003e\u003cp\u003eThe included CP 25 tweeter uses a 29 mm Tetolon fiber dome, a neodymium magnet, and a 25 mm voice coil cooled with ferrofluid. Hertz's Center Tuning Duct geometry is used to manage air exchange between the dome and rear chamber. The tweeter's low 1,200 Hz resonance frequency supports the system's 2.8 kHz crossover point.\u003c\/p\u003e\u003cp\u003eThe CPCX 2 passive crossover divides the signal at 2.8 kHz with a 12 dB-per-octave slope. Its three-position tweeter-level control provides -2 dB, 0 dB, and +2 dB settings for system tuning. This makes the kit appropriate for front-door and dash or sail-panel installations where tweeter location can affect tonal balance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Design:\u003c\/strong\u003e Separates woofer and tweeter placement for a more focused front stage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e105 W Continuous Handling:\u003c\/strong\u003e Supports use with a suitably matched aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 mm Tetolon Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction with a soft dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Tuning Duct:\u003c\/strong\u003e Helps lower tweeter resonance and reduce harmonic distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Woofer Cone:\u003c\/strong\u003e Balances low mass and rigidity for controlled midbass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossover:\u003c\/strong\u003e Offers -2 dB, 0 dB, and +2 dB tweeter settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CP 165 woofer uses a compact three-spoke basket with a rubber magnet cover, a pressed-paper cone, and a butyl-rubber surround. The CP 25 tweeter uses a Tetolon dome and neodymium motor structure. Supplied woofer grilles combine a high-resistance ABS frame with removable metallic mesh.\u003c\/p\u003e\u003cp\u003eConfirm available mounting depth, cutout diameter, and door-panel clearance before installation, since vehicle fitment varies. Connect each woofer and tweeter through its included CPCX 2 passive crossover rather than directly paralleling the drivers. The crossover provides separate amplifier input, woofer output, and tweeter output connections, while its tweeter-level switch can be set during final tuning.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631721635910,"sku":"CPK165","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/815_ElUCUnL.jpg?v=1784378904"},{"product_id":"hertz-cpx165-6-5-two-way-coaxial-speakers","title":"Hertz CPX165 6.5\" Two-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz CPX165 is a 6.5-inch two-way coaxial speaker designed for vehicle audio upgrades where a compact full-range speaker is needed. Its coaxial layout places the tweeter and woofer in one assembly, helping simplify installation in compatible factory speaker locations. The 4-ohm design makes it suited to systems built around compatible aftermarket or factory amplification.\u003c\/p\u003e\u003cp\u003eThis model is intended for listeners seeking clearer, more controlled reproduction than worn or basic factory speakers can provide. It combines a pressed-paper woofer cone with a soft Tetolon dome tweeter to cover midrange and high-frequency duties from one mounting position. With a specified frequency response of 45 Hz to 22 kHz, it is designed to handle a broad portion of the audible range.\u003c\/p\u003e\u003cp\u003eThe CPX165 is rated for 95 watts continuous power handling and 285 watts peak power handling. Its 25 mm pure-copper woofer voice coil is paired with a high-density-flux ferrite magnet assembly. The tweeter uses a neodymium magnet and a ferrofluid-cooled 20 mm voice coil.\u003c\/p\u003e\u003cp\u003eHertz uses a Radial Venting System with eight venting holes to promote voice-coil cooling and air exchange behind the tweeter. The speaker also uses a 3-spoke basket and an anti-vibration rubber magnet cover to help manage unwanted mechanical vibration. An integrated crossover is specified at 4 kHz with a 6 dB-per-octave slope.\u003c\/p\u003e\u003cp\u003eThese speakers can serve as a practical upgrade in compatible front-door, rear-door, or rear-deck locations, subject to vehicle fitment verification. Their 165 mm nominal size, 65.5 mm mounting-depth dimension, and 171 mm outside dimension should be checked against the vehicle before installation. Hertz lists the CPG165 protective grille as an optional accessory for installations where a grille is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e95W Continuous Handling:\u003c\/strong\u003e Supports compatible amplified audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Balances cone rigidity with low moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e Reproduces upper-frequency detail with a soft dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadial Venting System:\u003c\/strong\u003e Uses eight vents for voice-coil cooling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CPX165 uses a pressed-paper woofer cone, high-density-flux ferrite woofer magnet, neodymium tweeter magnet, and Tetolon dome. Its woofer has a 25 mm pure-copper voice coil, while the tweeter uses a 20 mm ferrofluid-cooled voice coil. The compact 3-spoke basket is paired with an anti-vibration rubber magnet cover.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, available mounting depth, mounting-hole pattern, and trim clearance before purchase. The manufacturer drawing lists a 65.5 mm mounting-depth dimension and 171 mm outside dimension, so adapters or spacers may be required depending on the vehicle. Connect the speakers to a compatible 4-ohm source and match amplifier output responsibly to the 95-watt continuous power rating.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631721799750,"sku":"CPX165","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61h7daXhUzL.jpg?v=1784378996"},{"product_id":"hertz-cx-165-6-5-two-way-coaxial-speakers","title":"Hertz CX 165 6.5\" Two-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz CX 165 is a pair of 6.5-inch two-way coaxial car speakers designed for factory-location audio upgrades. Its integrated tweeter layout provides a practical replacement option where separate tweeter mounting is not desired. The 4-ohm design is suited to systems built around compatible car audio amplification or speaker outputs.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for listeners seeking a fuller and more detailed presentation from a standard 6.5-inch mounting location. The coaxial format combines the woofer and tweeter in each speaker, simplifying installation compared with a separate-component system. They can be used in front or rear locations when vehicle fitment and mounting clearance are verified.\u003c\/p\u003e\u003cp\u003eThe CX 165 is rated for 70 watts continuous power handling and 210 watts peak power handling. Its specified frequency response extends from 55 Hz to 22 kHz, while the 93 dB SPL sensitivity specification supports efficient output. A 165 mm semi-pressed paper-mica woofer cone is engineered to balance low moving mass with damping.\u003c\/p\u003e\u003cp\u003eFor high-frequency reproduction, Hertz uses a 24 mm Tetolon dome tweeter with a neodymium magnet. The RHFC rotary high-frequency contour design allows the tweeter to be angled and directed toward the listener. Hertz also specifies a faceplate geometry developed for more linear off-axis response.\u003c\/p\u003e\u003cp\u003eThe woofer uses a 25 mm voice coil on an aluminum former and a high-density ferrite magnet assembly. Its compact three-spoke basket and rubber magnet cover are designed to help control unwanted vibration. As a pair, the CX 165 can serve as a direct coaxial upgrade or complement a larger Hertz-based vehicle audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Integrates woofer and tweeter in each speaker for a compact upgrade format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W Continuous Power:\u003c\/strong\u003e Supports systems with up to 70 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e24 mm Tetolon Tweeter:\u003c\/strong\u003e Provides high-frequency reproduction with a soft Tetolon dome.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRHFC Tweeter Adjustment:\u003c\/strong\u003e Allows the tweeter to be angled toward the listening area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSPP-M Woofer Cone:\u003c\/strong\u003e Semi-pressed paper and mica construction balances lightness and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Woofer Magnet:\u003c\/strong\u003e Uses a high-density ferrite motor with low-carbon polar plates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CX 165 combines a semi-pressed paper-mica woofer cone, Tetolon dome tweeter, high-density ferrite woofer magnet, and neodymium tweeter magnet. Its woofer has a 25 mm aluminum-former voice coil, while the tweeter assembly is ferrofluid cooled. The three-spoke basket includes a rubber magnet cover, and the optional CG 165 grille uses an ABS structure with protective metal mesh.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, and mounting-hole pattern before purchase. Hertz lists a 165 mm overall diameter, 142 mm dimension B, and 71 mm dimension C for the CX 165; installation adapters or brackets may be required depending on the vehicle. Wire each 4-ohm speaker with correct polarity and use an amplifier or source unit compatible with its impedance and power requirements.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631723405382,"sku":"CX165","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71xg88UIwrL.jpg?v=1784379588"},{"product_id":"hertz-dcx-165-3-6-5-2-way-coaxial-speakers","title":"Hertz DCX 165.3 6.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz Dieci DCX 165.3 is a pair of 6.5-inch, 2-way coaxial car speakers designed to replace worn or limited factory door speakers. Each speaker combines a woofer and tweeter in one assembly, making it a practical option where a separate component-speaker installation is not needed. With 4-ohm impedance and 60 watts RMS power handling, these speakers can be used with many factory radios or appropriately matched aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThis coaxial design is aimed at drivers who want a straightforward upgrade with fuller midrange and clearer high-frequency detail than aging original speakers may provide. The water-repellent pressed-paper woofer cone is paired with a TPU surround for controlled movement and everyday automotive use. A PEI dome tweeter handles high frequencies, while the integrated crossover directs the appropriate frequency range to each driver.\u003c\/p\u003e\u003cp\u003eThe DCX 165.3 has a specified frequency response of 60 Hz to 21 kHz and a 93 dB sensitivity rating. Its performance profile supports broad, usable coverage for front or rear speaker locations, although it is not intended to replace a dedicated subwoofer for deep bass. The 120-watt peak rating provides additional headroom above its 60-watt continuous rating.\u003c\/p\u003e\u003cp\u003eHertz uses a high-density-flux ferrite woofer magnet and a neodymium tweeter magnet in this model. The 25 mm woofer voice coil and 135 mm effective diaphragm diameter are part of the speaker's documented electro-acoustic design. These details support a compact coaxial format without requiring an external passive crossover box.\u003c\/p\u003e\u003cp\u003eThe DCX 165.3 is suited to vehicles that accept a 165 mm-class speaker, but fitment should always be checked against the specific vehicle's mounting opening, depth, and adapter requirements. Its 72 mm mounting depth and 144 mm physical B dimension should be considered before purchase. Optional Hertz DG 165.3 grilles are available separately for installations where speaker protection or a finished appearance is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Handling:\u003c\/strong\u003e Supports properly matched factory or aftermarket power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Reproduces the upper-frequency range through an integrated tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Paper Cone:\u003c\/strong\u003e Water-repellent cone material supports everyday vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Crossover:\u003c\/strong\u003e Routes appropriate frequencies to the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Compatible with common car-audio speaker wiring systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DCX 165.3 uses a water-repellent pressed-paper cone, TPU surround, high-density-flux ferrite woofer magnet, and neodymium tweeter magnet. Its 25 mm woofer voice coil and integrated PEI dome tweeter are contained in a round 165 mm coaxial speaker format. Each speaker weighs 0.77 kg.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific fitment before installation, including mounting-hole diameter, available mounting depth, factory speaker bracket shape, and connector type. The speakers use 4-ohm impedance and should be connected with correct polarity to a compatible radio or amplifier channel. Grilles are not included; the optional Hertz DG 165.3 grille may be used where appropriate.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631728091206,"sku":"DCX165-3","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/6151OmXnbeL.jpg?v=1784379983"},{"product_id":"hertz-dpk165-3-6-5-component-speaker-system","title":"Hertz DPK165-3 6.5\" Component Speaker System","description":"\u003cp\u003eThe Hertz DPK165-3 is a 6.5-inch, 2-way component speaker system designed for upgrading factory front-stage speakers with separately mounted woofers, tweeters, and passive crossovers. Its 4-ohm design works with compatible aftermarket amplifiers or car-stereo power, while its 80-watt RMS system rating provides useful headroom for a properly matched installation. The separate-driver layout allows the tweeters to be positioned higher in the cabin than door-mounted coaxial speakers.\u003c\/p\u003e\u003cp\u003eThis set is intended for listeners who want clearer vocal placement and more controlled midrange response from a conventional 6.5-inch speaker location. The 165 mm DPV 165.3 woofer uses a water-repellent pressed-paper cone and a V-cone profile intended to support off-axis listening in vehicle doors. Its stated 45 Hz to 23 kHz system frequency response covers low bass, midrange, and high-frequency detail within a component setup.\u003c\/p\u003e\u003cp\u003eA 26 mm DPT 26.3 soft Tetolon dome tweeter handles upper-frequency reproduction. The tweeter's 1.5 kHz resonance frequency supports use with the supplied passive crossover network, which divides the signal at 5 kHz. Separating the high-frequency driver from the woofer also gives installers flexibility to aim the tweeters toward the listening area.\u003c\/p\u003e\u003cp\u003eThe DPCX 2.3 external crossover uses a 6 dB\/octave low-pass section for the woofer and a 12 dB\/octave high-pass section for the tweeter, both at 5 kHz. Its vented enclosure and gold-plated terminal block provide dedicated connection points for amplifier input, woofer output, and tweeter output. This keeps frequency-routing components outside the speaker baskets for a more traditional component-system layout.\u003c\/p\u003e\u003cp\u003eThe DPK165-3 can serve as a front-speaker upgrade in a system using a compatible head unit or external amplifier. With 93 dB SPL sensitivity and 4-ohm nominal impedance, it is suited to installations where amplifier power and mounting depth have been checked before purchase. A subwoofer may be added separately when deeper low-frequency output is desired.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support flexible front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W RMS Handling:\u003c\/strong\u003e Supports compatible amplification up to 80 watts continuous per system rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e A 26 mm soft dome handles high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e Woofer profile is designed to support smooth off-axis midrange response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal DPCX 2.3 Crossover:\u003c\/strong\u003e Routes bass and treble frequencies to their respective drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Pressed-paper woofer cone is made for automotive speaker applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe system combines a high-density-flux ferrite woofer motor, neodymium tweeter motor, water-repellent pressed-paper woofer cone, and soft Tetolon tweeter dome. The DPV 165.3 woofer has a 165 mm outer diameter, 144 mm mounting cutout, and 72 mm mounting depth. The compact DPCX 2.3 crossover measures 102 x 76.5 x 32.5 mm.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 6.5-inch speaker, a 144 mm cutout, and 72 mm of mounting depth before installation. Mount each woofer in a rigid door or speaker location, position the tweeter where it can be directed toward occupants, and wire the amplifier or head-unit output to the crossover input before connecting its dedicated woofer and tweeter outputs. Observe polarity at every connection and use the crossover supplied for this system.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631728746566,"sku":"DPK165-3","price":275.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61DJ-gMsEzL.jpg?v=1784380387"},{"product_id":"hertz-dsk165-3-dieci-6-5-2-way-component-speaker-system","title":"Hertz DSK165.3 Dieci 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz DSK165.3 is a 6.5-inch, two-way component speaker system designed for upgrading factory front-stage audio with separate woofers, tweeters, and crossover components. Its component layout allows the tweeters to be positioned higher in the cabin than a coaxial speaker typically permits. This helps create a more focused presentation for vocals and upper-frequency detail.\u003c\/p\u003e\u003cp\u003eBuilt for vehicles using 6.5-inch speaker locations, the DSK165.3 combines 4-ohm impedance with 93 dB SPL sensitivity. Hertz rates the system for 80 watts continuous power handling and 160 watts peak power handling. It is suited to installations driven by a compatible factory or aftermarket source, as well as systems using appropriately configured external amplification.\u003c\/p\u003e\u003cp\u003eThe woofer uses a water-repellent pressed-paper V-cone design with a TPU surround. This construction is intended to support controlled cone movement, useful midrange detail, and bass output within the speaker's operating range. The specified frequency response is 50 Hz to 23 kHz.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the system uses 24 mm PEI dome tweeters with neodymium magnets. The supplied high-pass crossover is specified at 3.5 kHz with a 12 dB-per-octave slope. Separating the tweeter and woofer lets the system direct the appropriate frequency range to each driver.\u003c\/p\u003e\u003cp\u003eThe DSK165.3 is a practical choice for a front-door and dash, sail-panel, or A-pillar upgrade where separate tweeter placement is possible. Its 144 mm woofer mounting cutout and 64 mm mounting depth should be checked against the vehicle before installation. Optional grilles are available, while tweeter mounting accessories are included.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separates woofer and tweeter placement for a more flexible front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Woofer:\u003c\/strong\u003e Fits many common aftermarket speaker locations when mounting measurements allow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer Profile:\u003c\/strong\u003e Supports off-axis response and detailed mid-to-high frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses a 24 mm dome and neodymium magnet for high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive High-Pass Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter at a 3.5 kHz crossover point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Adds moisture resistance to the woofer cone material.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe woofer combines a water-repellent pressed-paper cone, TPU surround, high-density-flux ferrite magnet, pure-copper voice coil, and DIN-size basket with abrasion-resistant dust paint. The tweeter uses a PEI dome and neodymium magnet. Tin-plated high-current terminals, silver-plated lead wires, and a butyl-rubber protective cover are specified for the woofer assembly.\u003c\/p\u003e\u003cp\u003eConfirm a 144 mm mounting cutout and at least 64 mm of woofer mounting depth before purchase, while allowing room for the separate tweeters and crossover components. The included double-angle cup, tweeter cup, and tweeter gasket support external or flush-style tweeter mounting approaches. Use the specified crossover with the system and verify amplifier or head-unit compatibility with a 4-ohm speaker load.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631730810950,"sku":"DSK165-3","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71qQu9En_5L.jpg?v=1784380660"},{"product_id":"hertz-hex6-5m-tc-6-5-marine-coaxial-speakers","title":"Hertz HEX6-5M-TC 6.5\" Marine Coaxial Speakers","description":"\u003cp\u003eThe Hertz HEX6-5M-TC is a pair of 6.5-inch, 4-ohm two-way coaxial marine speakers with total-black grilles. They are designed for boat audio systems where conventional speakers may be exposed to water spray, sun, salt fog, and changing outdoor conditions. Their coaxial layout combines the woofer and tweeter in each speaker for a compact full-range installation.\u003c\/p\u003e\u003cp\u003eWith 50 watts continuous and 100 watts peak power handling, these speakers are suited to marine head units or appropriately matched external amplifiers. The 88 dB sensitivity and 50 Hz to 23 kHz frequency response support clear midrange, high-frequency detail, and usable bass output from a 6.5-inch speaker. A 4-ohm nominal impedance makes them compatible with many marine audio amplifiers and source units designed for 4-ohm speaker loads.\u003c\/p\u003e\u003cp\u003eThe HEX6-5M-TC uses a high-efficiency tweeter engineered for off-axis sound emission, which is useful in typical boat installations where listeners are not directly in front of the speakers. Its 24 mm PEI tweeter diaphragm is paired with a neodymium magnet for compact high-frequency reproduction. The woofer uses a polypropylene cone with UV inhibitors and a high-density-flux ferrite magnet.\u003c\/p\u003e\u003cp\u003eMarine-specific construction includes an IP65 protection rating, UV-resistance testing to ASTM-D4329, and salt-fog testing to ASTM-B117. Silicone-insulated lead wires, nickel-plated corrosion-resistant terminals, and a sealed built-in crossover are intended to support use in marine environments. The crossover also incorporates a resettable solid-state tweeter protection circuit.\u003c\/p\u003e\u003cp\u003eThese speakers are optimized for infinite-baffle applications, making them appropriate for installation in properly supported boat panels, consoles, or speaker locations without a dedicated enclosure. The tone-on-tone mesh grille uses a twist-and-lock retention system for a finished appearance and speaker protection. Their 60.5 mm mounting depth can help when planning an upgrade in locations with limited behind-panel clearance.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine Protection:\u003c\/strong\u003e Helps protect the speakers from water jets in marine installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV And Salt-Fog Tested:\u003c\/strong\u003e Built for exposure to sun and corrosive marine conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-Axis Tweeter:\u003c\/strong\u003e Supports high-frequency coverage in typical in-boat mounting positions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Crossover:\u003c\/strong\u003e Includes resettable solid-state tweeter protection for added reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-And-Lock Grille:\u003c\/strong\u003e Total-black mesh grille provides protection and secure retention.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HEX6-5M-TC combines a polypropylene woofer cone with UV inhibitors, a PEI tweeter dome, a ferrite woofer magnet, and a neodymium tweeter magnet. Its total-black, sound-transparent mesh grille is designed to complement dark marine interiors and exterior panels. Corrosion-resistant nickel-plated terminals and silicone-insulated lead wires support the speaker's marine-oriented construction.\u003c\/p\u003e\u003cp\u003eConfirm the available cutout diameter, mounting depth, and front clearance before installation. The speaker requires a 128 mm mounting cutout and 60.5 mm mounting depth, while the overall outside diameter is 172 mm. Use a compatible 4-ohm marine source unit or amplifier, observe correct polarity at the terminals, and install the speakers in a rigid infinite-baffle panel for their intended application.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631735562310,"sku":"HEX6-5M-TC","price":229.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-bRdvorPL.jpg?v=1784381176"},{"product_id":"hertz-hex6-5s-ld-g-6-5-rgb-marine-coaxial-speakers","title":"Hertz HEX6-5S-LD-G 6.5\" RGB Marine Coaxial Speakers","description":"\u003cp\u003eThe Hertz HEX6-5S-LD-G is a 6.5-inch two-way marine coaxial speaker set designed for boat audio systems that need weather-resistant sound and integrated RGB illumination. Its 4-ohm design works with compatible marine receivers and amplifiers, while the coaxial layout combines the woofer and tweeter in one mounting location. The SPORT-style grille gives the speaker a distinct appearance while protecting the driver assembly.\u003c\/p\u003e\u003cp\u003eThis set is intended for marine installations where conventional car speakers may not provide suitable protection from moisture, UV exposure, and salt fog. Hertz specifies IP65 protection along with ASTM-D4329 UV-resistance and ASTM-B117 salt-fog testing standards. It is suitable for properly protected in-wall or panel-mounted locations, but it is not intended for submersion.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 50 watts continuous power handling and 100 watts peak power handling. The 50 Hz to 23 kHz frequency response covers bass, midrange, and treble for a full-range coaxial installation. An 88 dB sensitivity rating and 4-ohm impedance support use with appropriately matched marine amplification.\u003c\/p\u003e\u003cp\u003eThe woofer uses a polypropylene cone with UV inhibitors and a 25 mm voice coil designed for infinite-baffle applications. Its PEI dome tweeter uses a neodymium motor and a 13 mm voice coil, while the woofer uses a high-density ferrite magnet. A sealed built-in crossover includes resettable solid-state tweeter protection to help protect the high-frequency driver during overload conditions.\u003c\/p\u003e\u003cp\u003eIntegrated RGB LEDs provide selectable accent lighting through the grille assembly. The lighting circuit uses switched 12 VDC power, with a specified maximum supply of 12.5 VDC and a 100 mA fuse requirement per speaker. The shallow 60.5 mm mounting depth and 155 mm cutout requirement make this set a practical option for compatible marine speaker openings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Certification:\u003c\/strong\u003e IP65 protection and tested resistance to UV exposure and salt fog support marine use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines a 6.5-inch woofer and 0.9-inch tweeter in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Built-in grille lighting can be wired for multiple color selections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W Continuous Handling:\u003c\/strong\u003e Matches well with appropriately rated marine receiver or amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Crossover:\u003c\/strong\u003e Built-in crossover includes resettable protection for the tweeter circuit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePaintable SPORT Grille:\u003c\/strong\u003e The removable grille can be customized to complement a boat's finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HEX6-5S-LD-G uses a sound-transparent mesh SPORT grille with a twist-and-lock retention system. Its polypropylene woofer cone includes UV inhibitors, while silicone-insulated lead wires and nickel-plated terminals are intended to support long-term marine installation. The grille-mounted RGB lighting is permanently attached to the grille assembly and should not be operated without it.\u003c\/p\u003e\u003cp\u003eVerify the available mounting depth, 155 mm cutout diameter, and 171 mm outside diameter before cutting an installation panel. Connect the speaker channels to a compatible 4-ohm marine receiver or amplifier, and route the LED circuit separately to switched 12 VDC with 100 mA protection per speaker. For RGB lighting, use a suitable control method and keep LED supply voltage at or below 12.5 VDC.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631741493318,"sku":"HEX6-5S-LD-G","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71RwCzrwIVL.jpg?v=1784381225"},{"product_id":"hertz-hmx6-5-ld-tw-6-5-rgb-marine-coaxial-speakers","title":"HERTZ HMX6-5-LD-TW 6.5\" RGB Marine Coaxial Speakers","description":"\u003cp\u003eThe HERTZ HMX6-5-LD-TW is a 6.5-inch, 4-ohm marine coaxial speaker set designed for installations where exposure to water spray, UV light, dust, and salt air is a concern. Its white grille and tone-on-tone front mesh suit marine audio systems with a clean all-white appearance. Integrated RGB LED lighting adds illumination without requiring a separate light assembly at the speaker location.\u003c\/p\u003e\u003cp\u003eWith 75 watts continuous and 150 watts peak power handling, these speakers are suited to marine stereo upgrades that need more output capability than basic factory speakers. The 50 Hz to 25 kHz frequency response covers midbass through high frequencies in a single coaxial design. A 89 dB sensitivity specification supports useful output from appropriately matched 4-ohm amplification.\u003c\/p\u003e\u003cp\u003eThe coaxial layout places a 1.4-inch PEI dome tweeter at the center of the polypropylene woofer. Its acoustic lens and faceplate are designed to support off-axis high-frequency dispersion, which is useful when speakers are mounted away from the primary listening position. A sealed built-in crossover directs frequencies between the woofer and tweeter and includes resettable solid-state tweeter protection.\u003c\/p\u003e\u003cp\u003eThe woofer uses a UV-inhibitor polypropylene cone with a co-molded Santoprene surround and a 1-inch voice coil. An aramid-fiber spider and silicone-insulated lead wires support long-term operation in demanding outdoor environments. The high-density ferrite woofer magnet and FEM-optimized high-excursion motor are designed for infinite-baffle applications common in marine speaker mounting locations.\u003c\/p\u003e\u003cp\u003eThe HMX6-5-LD-TW is part of Hertz's HMX LD speaker family and can be paired with the optional HM RGB 1 BK controller for RGB lighting control. It is intended for systems using standard 4-ohm speaker channels, including compatible marine source units and external amplifiers. Its IP65 rating and stated UV and salt-fog testing support use in marine and powersports-oriented installations when installed correctly.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Built-in multicolor lighting is positioned below the tweeter behind a transparent polypropylene diffuser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine Environmental Protection:\u003c\/strong\u003e IP65 protection, UV-resistance testing, and salt-fog testing support exposed installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Coaxial Layout:\u003c\/strong\u003e Combines a woofer and centrally mounted tweeter in one speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Handling:\u003c\/strong\u003e Supports appropriately matched amplification for higher-output marine audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustic Lens Tweeter:\u003c\/strong\u003e The PEI dome tweeter and lens are engineered for off-axis high-frequency dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Protection:\u003c\/strong\u003e A sealed crossover includes a resettable solid-state circuit for tweeter protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HMX6-5-LD-TW uses a UV-inhibitor polypropylene cone, co-molded Santoprene surround, aramid-fiber spider, and a marine-grade polymer basket and grille. Its tweeter uses a neodymium magnet, PEI dome, and sound-transparent stainless-steel mesh grille. Gold-plated corrosion-resistant terminals are provided for speaker connections.\u003c\/p\u003e\u003cp\u003eConfirm the available mounting area against the published physical dimensions before cutting a panel: the outer diameter is 172.2 mm, dimension B is 128 mm, mounting depth is 69 mm, and overall depth is 95.6 mm. Use a 4-ohm-compatible source unit or amplifier and account for the 75-watt continuous rating per speaker when system matching. The integrated RGB lighting is designed for use with the Hertz HM RGB 1 BK controller accessory.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631746048070,"sku":"HMX6-5-LD-TW","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71zc0BwnoaL.jpg?v=1784381399"},{"product_id":"hertz-hmx6-5s-ld-g-6-5-marine-rgb-speakers","title":"Hertz HMX6-5S-LD-G 6.5\" Marine RGB Speakers","description":"\u003cp\u003eThe Hertz HMX6-5S-LD-G is a pair of 6.5-inch two-way marine and powersports coaxial speakers with gray sport grilles and integrated RGB LED illumination. They are designed for open-air installations where water exposure, UV, vibration, dust, and temperature changes are practical concerns. Their 4-ohm design makes them suitable for many marine, ATV, UTV, and off-road audio systems.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 75 watts continuous power handling and 150 watts peak power handling. The 50 Hz to 25 kHz frequency response is intended to cover bass, midrange, and treble from a single coaxial location. With 89 dB SPL sensitivity, these speakers can be paired with a properly matched marine-rated amplifier or compatible head-unit power.\u003c\/p\u003e\u003cp\u003eThe HMX6-5S-LD-G uses a 1.4-inch PEI dome tweeter with a neodymium magnet, acoustic lens, and protective stainless-steel mesh grille. This arrangement is designed to support off-axis high-frequency dispersion, which can be useful when speakers are mounted low in a boat panel or away from the listening position. A sealed built-in crossover separates the woofer and tweeter sections.\u003c\/p\u003e\u003cp\u003eIts woofer uses a UV-inhibitor polypropylene cone, co-molded Santoprene surround, aramid-fiber spider, and silicone-insulated lead wires. The long-throw 25 mm woofer voice coil is tuned for infinite-baffle applications, such as boat side panels, consoles, and other open mounting surfaces. A high-density ferrite woofer magnet provides the motor structure for the moving assembly.\u003c\/p\u003e\u003cp\u003eIntegrated RGB lighting sits beneath the tweeter and uses a transparent polypropylene diffuser. Lighting control requires the optional Hertz HM RGB 1 BK accessory rather than being built into the speaker package. The HMX6-5S-LD-G can serve as a direct marine speaker upgrade or as part of a larger Hertz marine and powersports audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Handling:\u003c\/strong\u003e Supports properly matched amplification for marine and powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds lighting capability with the optional HM RGB 1 BK controller.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one 6.5-inch speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Uses an acoustic lens for broad off-axis high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e IP65-rated design is tested for UV and salt-fog exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfinite-Baffle Woofer:\u003c\/strong\u003e Optimized for open-panel marine and powersports mounting applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe speaker combines a UV-inhibitor polypropylene cone, Santoprene surround, marine-grade polymer basket, stainless-steel tweeter mesh, and gold-plated corrosion-resistant terminals. Hertz specifies IP65 protection, ASTM-D4329 UV-resistance testing, and ASTM-B117 salt-fog operability. The gray sport grille provides the finished appearance for exposed installations.\u003c\/p\u003e\u003cp\u003eVerify the available mounting surface before installation: the listed cutout diameter is 128 mm (5.04 inches), mounting depth is 69 mm (2.72 inches), and overall depth is 95.6 mm (3.76 inches). Use the supplied mounting hardware where appropriate and match the amplifier or source to the 4-ohm load and 75-watt continuous rating. For RGB illumination, plan separate wiring and add the optional Hertz HM RGB 1 BK controller.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631754600518,"sku":"HMX6-5S-LD-G","price":479.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71ldYiWRFML.jpg?v=1784381736"},{"product_id":"hertz-k165-6-5-2-way-component-speaker-system","title":"Hertz K165 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz K165 is a 6.5-inch, two-way component speaker system designed for front-stage upgrades in vehicles with separate woofer and tweeter locations. It replaces basic factory speakers with dedicated woofers and tweeters for more defined placement of midrange and high-frequency sound. Its 4-ohm design is suited to compatible factory radios or aftermarket amplification.\u003c\/p\u003e\u003cp\u003eThe system uses separate V 165 woofers and T 24 tweeters, allowing the tweeters to be positioned higher in the vehicle when suitable mounting locations are available. This layout can help direct higher frequencies toward the listening area rather than keeping all sound low in the doors. It is a practical option for OEM-style upgrades where component-speaker mounting provisions already exist.\u003c\/p\u003e\u003cp\u003eEach woofer uses a water-repellent pressed-paper V-cone with a foam surround. The cone profile is engineered for off-axis response, while the foam surround supports the woofer's sensitivity and bass response. A 25 mm pure-copper voice coil and high-flux ferrite magnet support its stated 75-watt continuous power handling.\u003c\/p\u003e\u003cp\u003eThe T 24 tweeter combines a 24 mm PEI dome with a neodymium magnet in a compact design. Its annular acoustic lens is designed to improve off-axis performance, which is useful where tweeters cannot be aimed directly at the listener. The tweeter wiring includes the system's integrated 6 dB\/octave crossover.\u003c\/p\u003e\u003cp\u003eWith a 55 Hz to 23 kHz stated frequency response and 93.5 dB SPL sensitivity, the K165 is intended as a full-range component set for a vehicle's front channels. It can be used as the primary speaker upgrade in a simple system or paired with a separate subwoofer for deeper low-frequency output. Verify the vehicle's mounting diameter, mounting depth, factory wiring, and available tweeter locations before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component Layout:\u003c\/strong\u003e Separate 6.5-inch woofers and tweeters allow placement appropriate to the vehicle's speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W Continuous Handling:\u003c\/strong\u003e Supports use with amplification rated appropriately for a 4-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e The pressed-paper cone profile is engineered for useful off-axis response and midrange detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e A compact 24 mm dome handles high frequencies with a neodymium magnet assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Tweeter Crossover:\u003c\/strong\u003e The 6 dB\/octave crossover is built into the tweeter wiring to simplify installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Tweeter Mounting:\u003c\/strong\u003e Included accessories support external or embedded tweeter mounting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V 165 woofer uses a water-repellent pressed-paper cone, foam surround, pure-copper voice coil, high-density-flux ferrite magnet, and DIN-size basket with abrasion-resistant dust paint. The T 24 uses a PEI dome, neodymium magnet, and annular acoustic lens. Hertz specifies a 25 mm woofer voice coil, a 14 mm tweeter voice coil, and ±3.5 mm mechanical excursion.\u003c\/p\u003e\u003cp\u003eInstall the woofers in compatible 6.5-inch locations only after confirming clearance against the listed physical dimensions. Connect the integrated crossover-equipped tweeter wiring as directed in the owner's manual, and use the supplied tweeter mounting parts for flush or surface-style placement. The set is appropriate for vehicles that can accommodate separate woofer and tweeter locations; vehicle-specific brackets, harnesses, or adapters may still be required.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631758598214,"sku":"K165","price":99.99,"currency_code":"USD","in_stock":true}]},{"product_id":"hertz-ml1650-3-6-5-mille-legend-woofers","title":"Hertz ML1650-3 6.5\" Mille Legend Woofers","description":"\u003cp\u003eThe Hertz ML1650-3 Mille Legend is a pair of 6.5-inch component woofers designed for high-quality car audio door installations. Each woofer is built to reproduce the low and mid-bass range with controlled output in a dedicated component-speaker system. It is a suitable upgrade for listeners building a more capable front-stage system than factory full-range door speakers provide.\u003c\/p\u003e\u003cp\u003eWith 125 watts continuous power handling and a 4-ohm nominal impedance, these woofers are intended for use with appropriately matched amplification. Their 40 Hz to 6.5 kHz frequency response supports use as the woofer section of a multi-driver system. The 93 dB SPL sensitivity specification helps support strong output from a properly configured amplifier and crossover setup.\u003c\/p\u003e\u003cp\u003eThe ML1650-3 uses a pressed-pulp cone reinforced with cotton fibers to balance low moving mass with controlled behavior across its operating range. Hertz pairs this cone with an exponential V-cone profile intended to maintain cone stability during excursion and support midrange dispersion. A Boundary Free IIR rubber surround increases the usable cone area within the 165 mm frame size.\u003c\/p\u003e\u003cp\u003eA 36 mm double-layer CCAW voice coil on a polyamide former is engineered for thermal stability and power handling. The neodymium motor uses CNC-machined low-carbon plates and an aluminum-covered pole piece. These construction details are intended to help control impedance behavior and reduce distortion at higher output levels.\u003c\/p\u003e\u003cp\u003eThe ML1650-3 is a standalone woofer component rather than a complete coaxial speaker or full component set. It can be paired with compatible tweeters and suitable passive or active crossover filtering to create a tailored two-way front system. Factory-supplied die-cast aluminum grilles add protection where the installation location requires exposed speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5-Inch Woofer:\u003c\/strong\u003e Fits applications designed around 165 mm speaker locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e125 W Continuous Handling:\u003c\/strong\u003e Supports use with appropriately matched external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 mm CCAW Voice Coil:\u003c\/strong\u003e Helps manage heat and maintain response under demand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Profile:\u003c\/strong\u003e Supports controlled cone motion and midrange dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeodymium Motor:\u003c\/strong\u003e Provides a compact magnetic motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Aluminum Grilles:\u003c\/strong\u003e Protect exposed woofer installations with a factory-matched finish.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ML1650-3 combines a pressed-pulp and cotton-fiber cone with a Boundary Free IIR rubber surround, a three-spoke aluminum-alloy basket, and integrated basket venting. Its motor structure includes CNC-machined plates, an aluminum-covered pole, and a neodymium magnet measuring 80 x 45 x 5 mm. Each speaker weighs 1.29 kg (2.84 lb), and the supplied grille is die-cast aluminum with a diamond-cut Hertz logo.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific door clearance, mounting-hole placement, and panel depth before installation. Hertz specifies a 156 mm (6.14-inch) center-to-center mounting pattern and 5 mm (0.2-inch) mounting holes. Use these woofers with appropriate high-pass\/low-pass crossover filtering and securely route protected speaker wire away from sharp edges, moving parts, moisture, and heat sources.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631760597062,"sku":"ML1650-3","price":999.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61WK7-36r7L.jpg?v=1784381994"},{"product_id":"hertz-mlk165-3-6-5-two-way-component-speakers","title":"Hertz MLK165-3 6.5\" Two-Way Component Speakers","description":"\u003cp\u003eThe Hertz MLK165-3, identified by Hertz as the MLK 165.3 Legend, is a 6.5-inch two-way component speaker system for upgrading a vehicle’s front-stage sound. It combines separate woofers, tweeters, and passive crossovers rather than using a single coaxial speaker. This layout allows the high-frequency drivers to be mounted independently for a more tailored installation.\u003c\/p\u003e\u003cp\u003eThe system is rated for 150 watts continuous power handling and 300 watts peak at 4 ohms. Its stated 40 Hz to 25 kHz frequency response supports a broad range from low midbass through upper treble. It is intended for installations using compatible speaker-channel amplification or a suitable factory or aftermarket audio source.\u003c\/p\u003e\u003cp\u003eThe ML 165.3 woofer uses a cotton-injected paper cone with an exponential V-cone profile and a Boundary Free IIR rubber surround. Its 36 mm CCAW double-layer voice coil is wound on a Kapton former, while the high-density flux ferrite motor is designed for the woofer’s midrange operation. A three-spoke aluminum-alloy basket with integrated venting supports the driver structure.\u003c\/p\u003e\u003cp\u003eThe ML 28.3 tweeter uses a 35 mm Tetolon fiber dome and a double-neodymium magnet assembly. Hertz specifies FEA-optimized dome geometry and a larger rear chamber, with a listed tweeter resonant frequency of 900 Hz. These design elements support controlled high-frequency output and installation flexibility in component-system layouts.\u003c\/p\u003e\u003cp\u003eThe included MLCX 165.3 passive crossover divides the system at 3.5 kHz with a 12 dB-per-octave low-pass\/high-pass network. Its three tweeter-level terminals provide +2 dB, 0 dB, and -2 dB settings, and the Hi-Contour switch changes the tweeter high-pass behavior for different tweeter positions and angles. This makes the set suited to custom door-and-dash, door-and-sail-panel, or similar component-speaker upgrades.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers, tweeters, and crossovers support flexible speaker placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous Rating:\u003c\/strong\u003e Handles substantial continuous system power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fiber Tweeters:\u003c\/strong\u003e 35 mm domes provide dedicated high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCotton-Injected Paper Woofers:\u003c\/strong\u003e Lightweight, stiff cone material supports responsive midbass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossovers:\u003c\/strong\u003e Tweeter level and Hi-Contour settings help tailor tonal balance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Surround:\u003c\/strong\u003e IIR rubber surround is engineered for improved woofer efficiency.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ML 165.3 woofer uses a high-density flux ferrite magnet, CCAW voice coil on a Kapton former, cotton-injected paper cone, and vented three-spoke aluminum-alloy basket. The ML 28.3 tweeter combines a Tetolon fiber dome, natural-fiber non-woven damping material, and a double-neodymium magnet assembly. A die-cast aluminum grille with a diamond-cut Hertz logo is included.\u003c\/p\u003e\u003cp\u003eVerify vehicle-specific mounting clearance, speaker-opening diameter, and tweeter mounting options before installation. Wire each woofer and tweeter through its supplied MLCX 165.3 passive crossover, observing polarity and selecting the appropriate tweeter-level terminal. Use the Hi-Contour control and the +2\/0\/-2 dB tweeter setting to help accommodate the tweeter’s final location and listening angle.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631768264774,"sku":"MLK165-3","price":1049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TB4nIXtWL.jpg?v=1784382227"},{"product_id":"hertz-mlk1650-3-6-5-component-speaker-system","title":"Hertz MLK1650-3 6.5\" Component Speaker System","description":"\u003cp\u003eThe Hertz MLK1650-3 Mille Legend is a 6.5-inch two-way component speaker system designed for front-stage car-audio upgrades. It separates mid-bass and high-frequency reproduction between dedicated woofers and tweeters, using external passive crossovers to direct the appropriate frequencies to each driver. This arrangement is suited to listeners building a more detailed, properly staged system than a coaxial-speaker installation provides.\u003c\/p\u003e\u003cp\u003eThe kit combines ML 1650.3 woofers with ML 280.3 Tetolon-dome tweeters and MLCX 2 TW.3 crossover networks. Its 4-ohm system impedance, 150-watt continuous power handling, and 300-watt peak rating make it appropriate for use with a suitably matched aftermarket amplifier. The system is intended to cover the critical front-stage range from mid-bass through treble.\u003c\/p\u003e\u003cp\u003eThe woofer uses a pressed-pulp cone with cotton fibers and an exponential V-Cone profile. These materials and geometry are designed to maintain controlled midrange behavior while providing useful mid-bass output from a 6.5-inch driver. A Boundary Free IIR rubber surround increases the active cone area relative to a conventional surround profile.\u003c\/p\u003e\u003cp\u003eThe 35 mm ML 280.3 tweeter uses a Tetolon fiber dome, neodymium motor, and die-cast aluminum faceplate. Its compact mounting format supports flush installation where a dedicated factory or custom tweeter location is available. The included crossover provides selectable tweeter-level adjustment as well as Hi-Boost, Mid-Contour, and Hi-Contour controls for tailoring the response to placement and vehicle acoustics.\u003c\/p\u003e\u003cp\u003eThe MLCX 2 TW.3 crossover also supports a selectable bi-amplified configuration. In this setup, separate amplifier channels can feed the woofer and tweeter sections through the crossover network. This makes the MLK1650-3 a flexible choice for a conventional component-speaker installation now or a more involved amplified system later.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates woofer and tweeter duties for a focused front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous Handling:\u003c\/strong\u003e Supports use with a properly matched aftermarket amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed-Pulp Cotton-Fiber Cone:\u003c\/strong\u003e Balances low moving mass with controlled cone behavior.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Rubber Surround:\u003c\/strong\u003e Expands usable cone area for mid-bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMLCX 2 TW.3 Crossover:\u003c\/strong\u003e Provides passive filtering and selectable response adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Bi-Amplification:\u003c\/strong\u003e Allows separate amplifier channels for woofer and tweeter sections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ML 1650.3 woofer uses a neodymium magnet, low-carbon CNC-machined plates, an aluminum-covered pole, and a 36 mm CCAW dual-layer voice coil on a polyamide former. Its three-spoke aluminum-alloy basket includes venting holes, while the supplied grille uses die-cast aluminum construction. The ML 280.3 tweeter combines a Tetolon fiber dome, neodymium motor, and die-cast aluminum faceplate.\u003c\/p\u003e\u003cp\u003eConfirm vehicle-specific fitment before purchase, including the woofer cutout, mounting depth, door-panel clearance, and a suitable location for each crossover. Install the passive crossovers between the amplifier or head-unit speaker output and the individual woofer\/tweeter drivers, observing marked polarity. For bi-amplified use, move the crossover's bi-amplification selector to ON and connect separate amplifier channels to the woofer and tweeter inputs as shown in the Hertz instructions.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631770591302,"sku":"MLK1650-3","price":1899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71LSJbZYnLL.jpg?v=1784382283"},{"product_id":"hertz-mp165p-3-6-5-3-ohm-component-woofer","title":"Hertz MP165P-3 6.5\" 3-Ohm Component Woofer","description":"\u003cp\u003eThe Hertz MP165P-3 is a 6.5-inch component woofer designed to bring focused mid-bass performance to a custom car audio system. It is intended for installations where a separate woofer, tweeter, and crossover—or an active DSP-based setup—are used instead of a coaxial speaker. Its 3-ohm nominal impedance helps compatible amplifiers deliver more output than a comparable 4-ohm driver.\u003c\/p\u003e\u003cp\u003eThis woofer is suited to listeners building a front-stage system with strong kick-drum impact, bass guitar definition, and clear lower-midrange presence. Its rated 45 Hz to 4.5 kHz operating range makes it appropriate for use with a properly selected tweeter or midrange. A subwoofer can be added below it for deeper bass extension and higher overall system output.\u003c\/p\u003e\u003cp\u003eThe MP165P-3 uses a 25 mm pure-copper voice coil wound on a polyamide former. The voice coil has a 14 mm winding height and is paired with a 95 mm high-density-flux ferrite magnet. This motor design supports 100 W continuous power handling and controlled cone movement.\u003c\/p\u003e\u003cp\u003eA pressed-pulp cone reinforced with cotton fibers is formed in Hertz's exponential V-cone profile. The profile is designed to support linear midrange behavior and broader off-axis dispersion, which is useful in door-mounted automotive installations. Its Boundary Free rubber surround is engineered to support efficient mid-bass output and extended cone travel.\u003c\/p\u003e\u003cp\u003eThe woofer is built on a low-depth aluminum-alloy basket that is designed to remain acoustically open behind the cone. With a 141 mm cutout requirement and 64 mm mounting depth, fitment should be checked against the vehicle door or speaker enclosure before purchase. It can be used as part of a Hertz Mille Pro component system or in a carefully tuned active system with compatible amplification and crossover settings.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Helps compatible amplifiers produce strong output from each channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 W Continuous Handling:\u003c\/strong\u003e Supports amplified front-stage and component-system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure Copper Voice Coil:\u003c\/strong\u003e Uses a polyamide former for dependable high-power operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExponential V-Cone:\u003c\/strong\u003e Supports linear midrange response and off-axis dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Rubber Surround:\u003c\/strong\u003e Allows efficient movement for fuller mid-bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Assembly:\u003c\/strong\u003e Uses a 95 mm high-density-flux ferrite magnet.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP165P-3 combines a pressed-pulp-and-cotton-fiber cone with a rubber surround, pure-copper voice coil, ferrite magnet, and aluminum-alloy basket. Its basket uses an acoustically transparent structure and a low-depth design intended to reduce installation constraints. The speaker weighs 1.2 kg and has a 165 mm nominal frame diameter.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle or enclosure provides a 141 mm mounting cutout and at least 64 mm of mounting depth, while also allowing clearance for the 74.5 mm overall depth dimension. Use a compatible amplifier and crossover or DSP to limit low-frequency excursion and set an appropriate upper crossover point for the companion tweeter or midrange. Optional grilles are listed by Hertz for installations where the cone needs added protection.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631774392390,"sku":"MP165P-3","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71y7A19K8zL_0739d67f-b742-416c-8bea-cec694e6c244.jpg?v=1784382436"},{"product_id":"hertz-mpg165-3-6-5-mille-pro-speaker-grilles","title":"Hertz MPG165-3 6.5\" Mille PRO Speaker Grilles","description":"\u003cp\u003eThe Hertz MPG 165.3 PRO is a 165 mm (6.5-inch) protective grille set for compatible Mille PRO speaker installations. It provides a finished, exposed-speaker mounting solution where a factory door panel or existing grille does not protect the driver. This accessory is intended for custom car-audio installations that need a dedicated speaker cover.\u003c\/p\u003e\u003cp\u003eDesigned around the Mille PRO 165 mm format, the MPG 165.3 PRO is associated with Hertz MPX 165.3 coaxial speakers and Mille PRO woofer applications. Its 6.5-inch format helps it coordinate with compatible Hertz drivers while adding a protective barrier in front of the speaker. Verify available panel clearance and mounting surface dimensions before installation.\u003c\/p\u003e\u003cp\u003eThis is a passive physical accessory, not a speaker, crossover, or amplifier. It does not require power, signal wiring, or amplifier matching. Its role is to help guard the exposed speaker area from incidental contact while presenting a clean, integrated appearance.\u003c\/p\u003e\u003cp\u003eThe grille uses a multi-piece design with mesh, frame, and inner-grille elements. Hertz identifies the MPG 165.3 PRO as an optional Mille PRO woofer grille, while the design includes a Hertz logo detail. The construction supports flexible visual treatment for custom door, kick-panel, or display-style installations.\u003c\/p\u003e\u003cp\u003eUse the MPG 165.3 PRO when building or refreshing a compatible 165 mm Hertz Mille PRO speaker installation. It is especially useful when speakers are mounted where they remain visible after trim work is completed. The included installation hardware and grille putty support a more complete custom-mounting setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e165 mm Format:\u003c\/strong\u003e Sized for compatible 6.5-inch Mille PRO speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grille:\u003c\/strong\u003e Adds a physical cover over an exposed speaker location.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-Piece Design:\u003c\/strong\u003e Combines mesh, frame, and inner-grille components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum:\u003c\/strong\u003e Uses aluminum grille construction with a finished appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHertz Logo:\u003c\/strong\u003e Features a diamond-cut aluminum Hertz logo detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation Hardware:\u003c\/strong\u003e Includes screws, speed clips, and grille putty.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPG 165.3 PRO uses black steel mesh, black plastic grille frames, and gray plastic inner grilles in a layered assembly. The grille is described as die-cast aluminum and carries a diamond-cut aluminum Hertz logo. Its listed finish is aluminum, with black and anthracite color elements.\u003c\/p\u003e\u003cp\u003eConfirm that the mounting surface accommodates the listed 7.225-inch outer diameter and 1.125-inch mounting height before cutting or drilling. The set includes mounting screws, speed clips, and grille putty; secure all components firmly and check that the grille does not interfere with vehicle trim, window travel, or the speaker cone. It is intended for compatible 165 mm Mille PRO applications, including the MPX 165.3 series.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631789400134,"sku":"MPG165-3","price":31.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UfeBn6qcL.jpg?v=1784382893"},{"product_id":"hertz-mpk-165-3-6-5-2-way-component-speaker-system","title":"Hertz MPK 165.3 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz MPK 165.3 is a 6.5-inch, 2-way component speaker system for replacing factory front-stage speakers with separately mounted woofers and tweeters. It combines the MP 165.3 woofer, MP 25.3 tweeter, and MPCX 2.3 passive crossover. This format allows more flexible tweeter placement than a coaxial speaker for a more focused front soundstage.\u003c\/p\u003e\u003cp\u003eDesigned for systems that need strong mid-bass from compact door locations, the MPK 165.3 has a rated frequency response of 40 Hz to 22.5 kHz. Its 110-watt continuous power rating and 4-ohm nominal impedance make it suitable for use with a properly matched aftermarket amplifier. The 92 dB system sensitivity also supports use in many upgraded factory-radio systems, though external amplification can provide greater output headroom.\u003c\/p\u003e\u003cp\u003eThe MP 165.3 woofer uses an exponential V-cone pressed-pulp cone with cotton fibers and a Boundary Free rubber surround. This construction is intended to maintain useful cone area and controlled mid-bass response while supporting broad midrange dispersion. A pure-copper voice coil on a Polyamide former and a high-density ferrite motor support the woofer section.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by the MP 25.3, a 29 mm Tetolon fiber soft-dome tweeter with a neodymium magnet and 25 mm voice coil. Its rear chamber and Center Tuning Duct geometry are designed to support a low crossover region with the woofer. The dedicated MPCX 2.3 crossover divides the system at 3.5 kHz and offers a 0 or +2 dB tweeter-level setting.\u003c\/p\u003e\u003cp\u003eThis system is a practical fit for a front-door and dash, sail-panel, or A-pillar upgrade where separate tweeter positioning is possible. The woofer's 63 mm mounting depth can help in installations with limited door clearance, but vehicle-specific fitment should always be checked before purchase. Full-protection metal mesh grilles and mineral powder-coated inner grilles are included for installation options where the woofers are exposed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Component Layout:\u003c\/strong\u003e Separates woofer and tweeter placement for a tailored front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110W Continuous Handling:\u003c\/strong\u003e Supports amplification matched to the system's continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eV-Cone Woofer:\u003c\/strong\u003e Pressed-pulp cone with cotton fibers supports wide midrange dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Surround:\u003c\/strong\u003e Rubber surround helps maximize effective cone area for mid-bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Dome Tweeter:\u003c\/strong\u003e A 29 mm soft dome handles detailed high-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossover:\u003c\/strong\u003e Selectable 0 or +2 dB tweeter level helps balance the installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 165.3 woofer uses a high-density flux ferrite magnet, low-carbon iron plates, a pure-copper voice coil, and an acoustically transparent aluminum-alloy basket. The MP 25.3 tweeter uses a Tetolon fiber soft dome, neodymium magnet, ferrofluid-cooled voice coil, and rear chamber. The compact MPCX 2.3 crossover uses 160V bi-metallized polyester film capacitors, 1 mm pure-copper-wire inductors, and a vented top grille for heat dissipation.\u003c\/p\u003e\u003cp\u003eMount the 6.5-inch woofers in a rigid, properly sealed door or speaker location with sufficient clearance for their 63 mm mounting depth and 141 mm cutout diameter. Install the tweeters behind their protective grilles and use the supplied passive crossovers between the amplifier or head unit and each woofer\/tweeter set; do not connect the tweeters directly to full-range power. Confirm polarity, secure all wiring away from moving parts and sharp edges, and select the 0 or +2 dB tweeter setting after listening from the driver's seat.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631816794182,"sku":"MPK165-3","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81eCQjmFpYL.jpg?v=1784383074"},{"product_id":"hertz-mpk1650-3-pro-6-5-component-speaker-system","title":"Hertz MPK1650-3 PRO 6.5\" Component Speaker System","description":"\u003cp\u003eThe Hertz MPK 1650.3 PRO is a 6.5-inch, two-way component speaker system designed for front-stage vehicle audio upgrades. It separates the woofer and tweeter so each driver can be placed where it performs most effectively. The kit is intended for listeners seeking stronger mid-bass presence, clearer upper detail, and more controllable imaging than typical coaxial replacements.\u003c\/p\u003e\u003cp\u003eThis system combines the MP 165P.3 woofer, MP 28.3 tweeter, and MPCX 165.3 passive crossover network. Its 3-ohm nominal impedance is designed to make effective use of compatible amplification, including 2-ohm-stable electronics. With 125 watts continuous power handling and 250 watts peak handling for the system, it is suited to a properly matched amplified installation.\u003c\/p\u003e\u003cp\u003eThe MP 165P.3 woofer uses a pressed-pulp cone with cotton fibers, an exponential V-cone profile, and a Boundary Free rubber surround. These elements support a controlled, solid mid-bass character while helping maintain dispersion through the midrange. Its 95 mm ferrite magnet and 14 mm-high copper voice coil are engineered for power handling and controlled excursion.\u003c\/p\u003e\u003cp\u003eFor high frequencies, the MP 28.3 uses a 28 mm CCAW voice coil, Tetolon fiber dome, rear acoustic chamber, and neodymium motor structure. The rear chamber is damped and lowers tweeter resonance to 900 Hz, allowing the crossover point to be selected at 3 kHz or 4 kHz. This flexibility helps accommodate different tweeter locations and listening angles in a vehicle.\u003c\/p\u003e\u003cp\u003eThe included MPCX 165.3 crossover manages the transition between the woofer and tweeter with 12 dB-per-octave low-pass and high-pass sections. It provides selectable Hi-Contour operation and tweeter output adjustment at +2 dB, 0 dB, or -2 dB. The system is a practical foundation for a dedicated front-stage upgrade when paired with appropriate installation hardware, wiring, and amplification.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separate woofers, tweeters, and passive crossovers support tailored front-stage placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Load:\u003c\/strong\u003e Helps compatible amplifiers deliver more available output power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fiber Dome:\u003c\/strong\u003e The MP 28.3 tweeter is designed for wide off-axis dispersion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Surround:\u003c\/strong\u003e Rubber surround design supports efficient mid-bass air movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Hi-Contour:\u003c\/strong\u003e Choose a 3 kHz or 4 kHz crossover point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTweeter Level Adjustment:\u003c\/strong\u003e Select +2 dB, 0 dB, or -2 dB output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 165P.3 woofer features an acoustically transparent aluminum-alloy basket with diamond-cut detailing, a 95 mm ferrite magnet, and a pressed-pulp cone reinforced with cotton fibers. The MP 28.3 tweeter uses a Tetolon fiber dome and neodymium motor, while the crossover uses polyester film capacitors, air-core copper inductors, and wirewound resistors. Full-protection metal mesh grilles and mineral powder-coated inner grilles are included for multiple installation approaches.\u003c\/p\u003e\u003cp\u003eInstall the 6.5-inch woofers in rigid, properly prepared door or kick-panel locations with adequate mounting clearance, and place the tweeters where their angle toward the listener can be optimized. Hertz illustrates tweeter placement on the A-pillars or dashboard and suggests a 12 to 15 cm spacing relationship for display-style placement. Connect each woofer and tweeter through its supplied MPCX 165.3 crossover, observe polarity, and select the Hi-Contour and tweeter-level settings after listening from the driver position.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631818399814,"sku":"MPK1650-3","price":787.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71oXCoVpiWL.jpg?v=1784383127"},{"product_id":"hertz-mpk165p-3-6-5-2-way-component-speaker-system","title":"Hertz MPK165P-3 6.5\" 2-Way Component Speaker System","description":"\u003cp\u003eThe Hertz MPK 165P.3 is a 6.5-inch, two-way component speaker system designed for upgrading a vehicle's front-stage sound. It separates the woofer and tweeter so each driver can be placed where it works most effectively in the cabin. The included passive crossover manages the frequency split between them for a coordinated installation.\u003c\/p\u003e\u003cp\u003eThis system is intended for listeners building a detailed front stage with strong mid-bass support. Its 3-ohm nominal impedance is designed to make effective use of compatible amplifier power, while its 115-watt continuous power handling supports amplified systems. With a 45 Hz to 22.5 kHz system frequency response, it covers the core musical range while pairing naturally with a dedicated subwoofer for lower bass duties.\u003c\/p\u003e\u003cp\u003eThe MP 165P.3 woofer uses an exponential V-cone pressed-pulp cone reinforced with cotton fibers. Its Boundary Free rubber surround is engineered to support efficient movement and broad mid-bass output. A 14 mm pure-copper voice coil on a polyamide former and a 95 mm ferrite magnet support controlled operation during dynamic passages.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by the separate MP 25.3 tweeter, which uses a 29 mm Tetolon fiber soft dome. Its Center Tuning Duct geometry, ferrofluid-cooled 25 mm voice coil, and rear damping chamber are designed for controlled high-frequency response. The tweeter's neodymium motor and optimized faceplate also support flexible off-axis installation.\u003c\/p\u003e\u003cp\u003eThe MPCX 2P.3 passive crossover joins the system together at 4 kHz. Its woofer section uses a 1 mm pure-copper-wire inductor, while the tweeter section uses a 160 V bi-metallized polyester film capacitor and air-core inductor. A selectable 0 or +2.5 dB tweeter setting allows the upper-frequency level to be adjusted for vehicle acoustics and tweeter placement.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Component System:\u003c\/strong\u003e Separates woofer and tweeter placement for a more focused front-stage installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Helps compatible amplifiers deliver strong output from available power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTetolon Fiber Soft-Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction with a 29 mm diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePure-Copper Woofer Voice Coil:\u003c\/strong\u003e Uses a 14 mm coil on a polyamide former for power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Rubber Surround:\u003c\/strong\u003e Supports woofer excursion and broad mid-bass performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Passive Crossover:\u003c\/strong\u003e Offers a 0 or +2.5 dB tweeter-level setting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 165P.3 woofer combines a pressed-pulp-and-cotton-fiber V-cone with a Boundary Free rubber surround, high-density ferrite magnet, and acoustically transparent aluminum-alloy basket. The MP 25.3 tweeter uses a Tetolon fiber dome, neodymium magnet, and ferrofluid-cooled voice coil. A metal mesh grille with an aluminum Hertz logo and mineral-powder-coated inner grille is included, along with tweeter mounting accessories.\u003c\/p\u003e\u003cp\u003eConfirm available door depth and a 141 mm cutout before installation; the woofer has a 64 mm mounting depth and 74.5 mm overall depth. Mount the MPCX 2P.3 crossover in a dry, protected location and wire the amplifier to its input terminals, then connect its dedicated woofer and tweeter outputs to the matching drivers. The crossover measures 102 x 76.5 x 37 mm, and the tweeter level can be set to 0 or +2.5 dB after listening from the driver's seat.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631820300358,"sku":"MPK165P-3","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81tKk2G23vL.jpg?v=1784383183"}],"url":"https:\/\/audiowatt.store\/collections\/6-5-inch-speakers.oembed?page=4","provider":"Audio Watt Store","version":"1.0","type":"link"}