{"title":"3.5 Inch Speakers","description":null,"products":[{"product_id":"cerwin-vega-h35-3-5-2-way-coaxial-speakers","title":"Cerwin-Vega H35 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega H35 is a pair of compact 3.5-inch, 2-way coaxial car speakers designed for replacing factory speakers in space-limited locations. Each speaker combines a woofer and tweeter in one assembly, helping simplify a full-range speaker upgrade. It is suited to vehicles with compatible 3.5-inch factory locations and adequate mounting clearance.\u003c\/p\u003e\u003cp\u003eWith 40 watts RMS and 120 watts maximum power handling per speaker, the H35 is intended for use with a compatible factory radio or an appropriately matched aftermarket amplifier. Its 4-ohm nominal impedance suits common car-audio speaker circuits. The 84 Hz to 20 kHz published frequency response covers midrange and high-frequency duties in a compact format.\u003c\/p\u003e\u003cp\u003eThe H35 uses a responsive polypropylene woofer cone with a UV-treated foam surround. This material combination is designed to support controlled cone movement while adding resistance to sun-related wear. A strontium ferrite woofer magnet provides the motor structure for the woofer section.\u003c\/p\u003e\u003cp\u003eHigh frequencies are handled by a dynamically balanced 1-inch PEI balanced-dome tweeter with a neodymium magnet. An integrated crossover directs the appropriate frequency range to the woofer and tweeter. Built-in tweeter protection is included to help protect the high-frequency driver during demanding playback.\u003c\/p\u003e\u003cp\u003eFor a clean installation, the H35 has a 3.11-inch cutout requirement and a 1.54-inch mounting depth. Its rigid stamped-steel basket is powder coated, and the pair does not include grilles according to the manufacturer specification chart. Confirm vehicle-specific fitment, panel clearance, and mounting-hole alignment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch 2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter functions in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40W RMS Per Speaker:\u003c\/strong\u003e Supports power matching with compatible head units or amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Woofer Cone:\u003c\/strong\u003e Provides a lightweight cone material for midrange and bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Treated Foam Surround:\u003c\/strong\u003e Helps support long-term durability in vehicle environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch PEI Dome Tweeter:\u003c\/strong\u003e Handles upper-frequency detail with a neodymium tweeter magnet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Protection:\u003c\/strong\u003e Routes frequencies between drivers and protects the tweeter.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe H35 uses a powder-coated, rigid stamped-steel basket with a strontium ferrite woofer magnet. Its woofer uses a polypropylene cone and UV-treated foam surround, while the centrally mounted PEI balanced-dome tweeter uses a neodymium magnet. The set is sold as a pair and is specified without grilles.\u003c\/p\u003e\u003cp\u003eVerify that the mounting location accepts a 3.11-inch cutout, 1.54-inch mounting depth, and 3.43-inch speaker diameter before ordering. Mount the speakers securely to a flat baffle and seal the frame to reduce air leaks around the mounting surface. Observe speaker polarity when wiring and use an amplifier or receiver compatible with 4-ohm speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614349189190,"sku":"CER-H35","price":73.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_IM6REBML.jpg?v=1784366746"},{"product_id":"cerwin-vega-v3-3-5-2-way-coaxial-speakers","title":"Cerwin-Vega V3 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Cerwin-Vega V3 is a compact 3.5-inch, 2-way coaxial speaker pair for upgrading factory-sized vehicle speaker locations. Its coaxial layout places the tweeter and woofer in one assembly, helping simplify installation where space is limited. The pair is designed for listeners who want clearer, more complete sound from small dashboard, corner, or factory speaker positions.\u003c\/p\u003e\u003cp\u003eWith 60 watts RMS and 180 watts maximum power handling, the V3 is suited to systems using either a compatible factory head unit or an appropriately matched aftermarket amplifier. Its 4-ohm nominal impedance is common in aftermarket car-audio applications. The 84 Hz to 20 kHz frequency-response specification supports midrange and high-frequency reproduction in a compact format.\u003c\/p\u003e\u003cp\u003eA hybrid carbon fiber\/polypropylene cone forms the woofer section, balancing rigidity with practical durability for everyday vehicle use. The Santoprene rubber surround is intended to support cone movement while resisting wear. Together, these materials support controlled output in a small-diameter speaker.\u003c\/p\u003e\u003cp\u003eThe V3 uses a dynamically balanced silk-dome tweeter with a neodymium magnet to reproduce upper-frequency detail. An integrated crossover directs frequencies between the woofer and tweeter within the coaxial assembly. Built-in tweeter protection is included to help safeguard the high-frequency driver during demanding playback.\u003c\/p\u003e\u003cp\u003eThis speaker pair can be used as a direct-size replacement where vehicle dimensions permit, or as part of a broader Cerwin-Vega VEGA Series system. Its compact nominal 3-inch driver size is sold as a 3.5-inch-class replacement speaker, so fitment should be checked carefully before purchase. Mesh steel grilles are included for installations where a protective grille is needed.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS Power Handling:\u003c\/strong\u003e Supports matched aftermarket amplification or head-unit power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone:\u003c\/strong\u003e Carbon fiber\/polypropylene construction supports accurate, responsive reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk-Dome Tweeter:\u003c\/strong\u003e Helps provide detailed high-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover:\u003c\/strong\u003e Routes frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel Mesh Grilles:\u003c\/strong\u003e Included for added driver protection where needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V3 uses a hybrid carbon fiber\/polypropylene cone, Santoprene rubber surround, dynamically balanced silk-dome tweeter, and a strontium ferrite woofer magnet. Its basket is a powder-coated, rigid stamped-steel design intended to reduce unwanted vibration. The included mesh steel grilles complement the speaker's compact coaxial construction.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting space before installation: the V3 has a 3.11-inch cutout requirement, 1.67-inch mounting depth, and 3.43-inch chassis diameter. It uses a 4-ohm nominal load, so any connected amplifier or receiver should be compatible with that impedance. Use the supplied speakers as a stereo pair and match amplifier output conservatively to the 60-watt RMS handling specification.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45617521033286,"sku":"CER-V3","price":98.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71xvxg8KaoL.jpg?v=1784369323"},{"product_id":"hertz-dcx87-3-3-5-two-way-coaxial-speakers","title":"Hertz DCX87-3 3.5\" Two-Way Coaxial Speakers","description":"\u003cp\u003eThe Hertz DCX87-3 Dieci Series speakers are compact 3.5-inch two-way coaxial speakers designed for vehicle locations with limited mounting space. They provide a direct speaker-upgrade option where a small round factory speaker is used. Their 4-ohm design makes them suitable for many standard car-audio speaker circuits.\u003c\/p\u003e\u003cp\u003eEach speaker combines an 87 mm water-repellent pressed-paper woofer with a centrally mounted PEI-dome tweeter. This coaxial layout brings low and high frequency reproduction together in one compact assembly. The specified 130 Hz to 21 kHz frequency response supports clear midrange and high-frequency reproduction in a small-speaker application.\u003c\/p\u003e\u003cp\u003eThe DCX87-3 is rated for 30 watts continuous power handling and 60 watts peak power handling. Its 92 dB SPL sensitivity can help it produce useful output from modest-power factory or aftermarket sources. Match the speakers with an amplifier or receiver that is appropriate for a 4-ohm speaker load and its continuous-power rating.\u003c\/p\u003e\u003cp\u003eHertz uses a high-density-flux ferrite woofer magnet and a neodymium tweeter magnet in this design. The woofer uses a pure-copper voice coil wound on a Conex former, while the fabric surround is intended to support excursion and damp resonance. Tin-plated high-current terminals and silver-plated lead wires are used for dependable signal connections.\u003c\/p\u003e\u003cp\u003eThese speakers fit well in a focused system refresh where compact factory speakers need replacement without moving to separate tweeters and external crossover hardware. Check the vehicle's speaker opening, mounting depth, and mounting-hole pattern before purchase. Their compact physical dimensions make installation planning especially important in dash, rear-panel, and other tight locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Way Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e87 mm Woofer:\u003c\/strong\u003e Fits applications designed for approximately 3.5-inch speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Dome Tweeter:\u003c\/strong\u003e Handles high-frequency reproduction in the coaxial design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the woofer diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches common vehicle speaker-system impedance requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 W Continuous Rating:\u003c\/strong\u003e Supports power matching with modest factory or aftermarket amplification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DCX87-3 uses a water-repellent pressed-paper woofer cone, fabric surround, high-density-flux ferrite woofer magnet, and neodymium tweeter magnet. Its basket is protected with abrasion-resistant dust paint, and Hertz specifies epoxy bonding between the basket and motor system. The compact speaker has a 20 mm pure-copper woofer voice coil on a Conex former.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts an approximately 87 mm round speaker and compare available clearance with the 45 mm mounting-depth dimension before installation. Use the mounting template and supplied hardware when compatible with the mounting location, and observe correct speaker polarity at the terminals. These speakers are sold as a pair; grilles are not included.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631728451654,"sku":"DCX87-3","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71hvq9P4NJL.jpg?v=1784380194"},{"product_id":"hifonics-hcc35cx-3-5-2-way-coaxial-car-speakers","title":"Hifonics HCC35CX 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Hifonics HCC35CX is a pair of 3.5-inch, 2-way coaxial car speakers designed to replace compatible factory speakers in compact dash, door, or rear-panel locations. They provide a straightforward upgrade path for vehicles whose original small speakers sound worn, dull, or limited in detail. With a 4-ohm design and 25 watts RMS handling per speaker, they are suited to factory radios and modest aftermarket amplification.\u003c\/p\u003e\u003cp\u003eA blue woven-fiber woofer cone handles the midrange, while the centrally mounted 1-inch aluminum dome tweeter reproduces upper frequencies. The stated 80 Hz to 20 kHz frequency response supports clear vocal and instrument detail across the speakers' intended operating range. Their 88 dB sensitivity helps them produce useful output from moderate power.\u003c\/p\u003e\u003cp\u003eThe HCC35CX uses a passive Butterworth crossover network to divide the signal between the woofer and tweeter. Its specified 6 kHz crossover point and 12 dB slope are intended to provide a controlled transition between the two drivers. This coaxial arrangement keeps both drivers together in a compact speaker footprint.\u003c\/p\u003e\u003cp\u003eConstruction includes butyl rubber surrounds, an epoxy-infused natural-fiber spider, and an anti-resonant stamped-steel basket. A ferrite magnet motor structure and pure copper voice coil provide the speaker's motor system. The voice coil uses a Kapton former and an overcoil cooling design to help manage heat during operation.\u003c\/p\u003e\u003cp\u003eThese speakers are a practical choice for replacing 3.5-inch factory locations where space is limited and a full component system is unnecessary. They are sold as a pair, allowing both speakers in a matched location to be upgraded together. Confirm the vehicle's opening size, available depth, mounting pattern, and wiring arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS Per Speaker:\u003c\/strong\u003e Matches moderate-power factory and aftermarket audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoven-Fiber Cone:\u003c\/strong\u003e Supports controlled midrange reproduction in a lightweight driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Dome Tweeter:\u003c\/strong\u003e Extends high-frequency reproduction to the stated 20 kHz limit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Butterworth Crossover:\u003c\/strong\u003e Directs frequencies between the woofer and tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOvercoil Cooling System:\u003c\/strong\u003e Helps dissipate voice-coil heat during extended listening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCC35CX combines a stamped-steel basket with a ferrite magnet motor, butyl rubber surround, epoxy-infused natural-fiber spider, and braided tinsel leads. Its woofer uses a blue woven-fiber cone, while the 1-inch dome tweeter uses aluminum. No speaker grilles are included.\u003c\/p\u003e\u003cp\u003eVerify a 3.41-inch cutout and at least 1.5 inches of top-mount depth at the intended location before ordering. The speakers support spade-terminal connections or direct soldering, so vehicle-specific adapters, mounting hardware, or wiring adapters may be needed depending on the installation. Use a compatible 4-ohm amplifier or head-unit speaker output and avoid exceeding the 25-watt RMS rating per speaker.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631920341062,"sku":"HCC35CX","price":27.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61RnrAGKREL.jpg?v=1784388785"},{"product_id":"hifonics-zs35cx-3-5-2-way-coaxial-car-speakers","title":"Hifonics ZS35CX 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Hifonics ZS35CX is a pair of 3.5-inch, 2-way coaxial car speakers designed to replace factory speakers or support a compact vehicle-audio upgrade. Their small format suits vehicles with 3.5-inch speaker locations where space is limited. Each speaker combines a woofer and tweeter in one assembly for a straightforward installation approach.\u003c\/p\u003e\u003cp\u003eWith 25 watts RMS and 125 watts peak power handling per speaker, the ZS35CX is intended for modest-power factory-radio or external-amplifier systems. Its 4-ohm impedance is common in automotive audio applications. The specified 80 Hz to 20 kHz frequency response covers midrange and high-frequency duties in a full-range speaker system.\u003c\/p\u003e\u003cp\u003eThe speaker uses a 1-inch Neo-Mylar soft-dome tweeter to handle high-frequency detail. A passive Butterworth crossover at 6 kHz with a 12 dB slope directs frequencies between the woofer and tweeter. This integrated crossover design helps provide a more controlled handoff between the two drivers.\u003c\/p\u003e\u003cp\u003eAn Alpha-Cellulose woofer cone and rubber surround form the low- and mid-frequency section of each speaker. The woofer is paired with a pure-copper voice coil on a Kapton former, while an overcoil air-exchange design supports heat dissipation around the voice coil. An epoxy-infused natural-fiber spider provides suspension support for the moving assembly.\u003c\/p\u003e\u003cp\u003eThe ZS35CX is a practical option for refreshing small factory speaker positions in compatible cars. Its stamped-steel basket and ferrite motor structure provide the basic mechanical foundation for the speaker assembly. Use it as a direct replacement where vehicle mounting diameter, cutout, depth, and wiring connections are verified before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in each compact speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS Handling:\u003c\/strong\u003e Supports moderate-power factory or amplified audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1-Inch Neo-Mylar Tweeter:\u003c\/strong\u003e Reproduces upper-frequency detail through a soft-dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlpha-Cellulose Woofer Cone:\u003c\/strong\u003e Provides a lightweight, rigid cone construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButterworth Crossover:\u003c\/strong\u003e Divides woofer and tweeter frequencies at 6 kHz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Adds durability and supports woofer movement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZS35CX uses an anti-resonant stamped-steel basket, ferrite magnet motor, Alpha-Cellulose cone, rubber surround, copper voice coil, Kapton former, and epoxy-infused natural-fiber spider. These materials support the speaker's compact coaxial construction. The pair is finished in black and does not include speaker grilles.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's available mounting location, cutout, depth clearance, and connector polarity before purchase or installation. Published installation dimensions list a 3.1-inch cutout and 1.63-inch top-mount depth; check clearance behind the mounting surface and around moving window mechanisms where applicable. The speakers can be used with a compatible factory head unit or amplifier, provided power is kept within their 25-watt RMS rating per speaker.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631963037766,"sku":"ZS35CX","price":28.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71X_Yr4xwqL.jpg?v=1784390770"},{"product_id":"infinity-ref307f-3-5-2-way-coaxial-car-speakers","title":"Infinity REF307F 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Infinity REF307F is a pair of 3.5-inch, 2-way coaxial car speakers designed to replace worn or limited factory speakers in compact vehicle locations. Its round 3.5-inch format suits applications where available mounting space is restricted. Each speaker combines a woofer and tweeter in one assembly for a straightforward full-range speaker upgrade.\u003c\/p\u003e\u003cp\u003eThese speakers are intended for drivers who want clearer everyday music reproduction from a compatible factory or aftermarket audio system. With 25 watts RMS power handling per speaker and 91dB sensitivity at 2.83V\/1m, the REF307F is sized appropriately for modest-power amplification. Its 3-ohm nominal impedance is designed to work with typical automotive speaker wiring and compatible source units or amplifiers.\u003c\/p\u003e\u003cp\u003eThe REF307F uses an edge-driven textile tweeter to reproduce high frequencies and a Plus One polypropylene woofer cone for the lower and midrange portions of the signal. The two-way coaxial layout keeps the drivers aligned in a compact assembly. Frequency response is rated at 85Hz to 21kHz, making these speakers suited to upper-range and full-range factory replacement positions rather than dedicated deep-bass duty.\u003c\/p\u003e\u003cp\u003eInfinity's Plus One woofer-cone architecture increases usable cone area compared with conventional cone geometry in its class. In practical terms, the design supports efficient output and low-frequency presence from a small speaker footprint. A rubber surround complements the polypropylene cone for a durable moving assembly.\u003c\/p\u003e\u003cp\u003eThe REF307F can be used as part of a staged factory-system refresh, including dashboard, rear-panel, or other compatible 3.5-inch locations. Its 1-7\/16-inch mounting depth and 3-inch cutout requirement should be checked against the vehicle before purchase. For systems needing stronger low bass or substantially higher output, these speakers can be paired with appropriately matched larger speakers, amplification, or a subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Format:\u003c\/strong\u003e Combines woofer and tweeter in a compact full-range speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS Handling:\u003c\/strong\u003e Supports 25 watts of continuous power per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEdge-Driven Textile Tweeter:\u003c\/strong\u003e Reproduces high frequencies with a textile dome design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Provides increased cone area within the speaker frame.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for use with compatible automotive audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Mounting Profile:\u003c\/strong\u003e Uses a 3-inch cutout and 1-7\/16-inch mounting depth.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe REF307F uses polypropylene Plus One woofer cones, rubber surrounds, and edge-driven textile tweeters in a two-way coaxial design. Its compact optimized frame is intended to fit standard 3.5-inch vehicle speaker locations. The pair is finished in black and does not include speaker grilles.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle has sufficient clearance for the 3-7\/16-inch external diameter, 3-inch mounting cutout, and 1-7\/16-inch mounting depth before installation. Observe speaker polarity when connecting the factory wiring or amplifier leads, and match amplifier output conservatively to the 25W RMS-per-speaker rating. The package includes foam mounting tape, but vehicle-specific adapters, wiring harnesses, and mounting hardware may be needed depending on the installation location.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632045121606,"sku":"INFSPKRF307FUS","price":114.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61lfOOqLRVL.jpg?v=1784392712"},{"product_id":"jbl-rallybar-xl2-35-outdoor-vehicle-soundbar","title":"JBL RALLYBAR XL2 35\" Outdoor Vehicle Soundbar","description":"\u003cp\u003eThe JBL RALLYBAR XL2 is a powered 35-inch outdoor vehicle soundbar designed for UTVs, golf carts, boats, and similar recreational vehicles. It combines amplification, speakers, passive radiators, lighting, and mounting hardware in one weather-resistant assembly. This makes it a practical audio upgrade where conventional in-cabin speakers or separate component systems are not appropriate.\u003c\/p\u003e\u003cp\u003eIts built-in Class-D amplifier is rated at 300 watts RMS and drives eight 2.75-inch woofers, two 1-inch tweeters, and four racetrack passive radiators. The system is engineered to produce broad-range sound with substantial low-frequency support from a compact overhead-bar format. AI Sound Boost automatically adjusts audio processing in real time to help maintain clear playback as volume and content change.\u003c\/p\u003e\u003cp\u003eFor outdoor use, the RALLYBAR XL2 carries an IP67 water- and dust-resistance rating. Its operating voltage range of 9 to 16 VDC supports installation on compatible vehicle electrical systems, while the included 10 AWG power\/ground harness is 12 feet long. A 40A fuse is specified for the XL2 power connection.\u003c\/p\u003e\u003cp\u003eMusic can be played through Bluetooth, a USB storage device, or an RCA input. The soundbar automatically prioritizes sources in the order of USB, Bluetooth, then RCA input. RCA input gain can be set for 2V, 4V, or 6V source levels to better match a compatible head unit or audio source.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR XL2 is also suited to expandable recreational-vehicle audio systems. Two XL2 soundbars can be paired for true stereo, and Auracast connectivity supports wireless linking with compatible JBL speakers. Dynamic RGB lighting and map lights add useful visual functionality without requiring a separate lighting accessory.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Class-D Amplifier:\u003c\/strong\u003e Built-in amplification eliminates the need for a separate external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35-Inch Multi-Driver Array:\u003c\/strong\u003e Eight woofers, two tweeters, and four passive radiators create full-range playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Water- and dust-resistant construction supports exposed recreational-vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Sound Boost:\u003c\/strong\u003e Real-time processing helps optimize audio output as music plays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuracast Connectivity:\u003c\/strong\u003e Link compatible JBL speakers or pair two XL2 units for stereo.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB And Map Lighting:\u003c\/strong\u003e Built-in lighting includes selectable RGB patterns and map-light brightness settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RALLYBAR XL2 uses an integrated soundbar layout measuring 35-11\/32 inches wide, 5 inches deep, and 4-5\/8 inches high. It weighs 16.75 pounds and includes a protective grille structure, LED lighting, bottom-panel controls, and a rotatable JBL logo badge. Its mounting system provides top- and back-mount positioning options, with eight cleat positions for the XL2.\u003c\/p\u003e\u003cp\u003eFor installation, mount the soundbar securely to a suitable 1.5-, 1.75-, or 2-inch vehicle pole using the supplied cleats, C-clamps, and rubber strips. Connect the included 12-foot, 10 AWG power\/ground harness to a compatible 9-16VDC electrical system and use the specified 40A fuse arrangement. Bluetooth is the simplest source connection, while USB playback and RCA input allow integration with stored music or a compatible audio source.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632134840390,"sku":"JBLRALLYBARXL2BLK","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Y9muIIPJL.jpg?v=1784396335"},{"product_id":"jbl-rallybar-xl2-35-outdoor-vehicle-bluetooth-soundbar","title":"JBL RALLYBAR XL2 35\" Outdoor Vehicle Bluetooth Soundbar","description":"\u003cp\u003eThe JBL RALLYBAR XL2 is a 35-inch powered Bluetooth soundbar designed for UTVs, golf carts, boats, and other recreational vehicles. It provides an all-in-one audio solution where conventional enclosed-car speakers are not practical. The Ghost White finish gives compatible open-air vehicles a clean, integrated appearance.\u003c\/p\u003e\u003cp\u003eA built-in 300W RMS Class-D amplifier powers an array of eight 2.75-inch woofers, two 1-inch tweeters, and four racetrack passive radiators. This integrated design eliminates the need to match the soundbar to a separate external amplifier. Its 45Hz-20kHz frequency response is suited to full-range music playback in open outdoor environments.\u003c\/p\u003e\u003cp\u003eThe RALLYBAR XL2 uses JBL AI Sound Boost to fine-tune playback in real time. Dynamic LED lighting can respond to music, with controls located on the bottom panel for adjusting the lighting mood. It is designed to add both sound and visual presence without requiring a separate lighting system.\u003c\/p\u003e\u003cp\u003eIts IP67-rated construction is intended for outdoor vehicle use where dust, rain, mud, and water exposure are concerns. The soundbar operates from a 9-16V DC electrical system and includes a 12-foot 10 AWG power\/ground harness. A lighter build than the prior generation helps make handling and installation more manageable.\u003c\/p\u003e\u003cp\u003eBluetooth 5.4, USB media playback, and RCA input provide several ways to connect music sources. USB has priority over Bluetooth, while Bluetooth has priority over RCA input when multiple sources are connected. For larger setups, two RALLYBAR XL2 soundbars can be paired for true stereo, or the system can connect with JBL Auracast-enabled speakers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Class-D Amplifier:\u003c\/strong\u003e Built-in amplification simplifies system design and eliminates the need for a separate amp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e35-Inch Full-Range Array:\u003c\/strong\u003e Eight woofers, two tweeters, and passive radiators deliver broad, open-air coverage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 Protection:\u003c\/strong\u003e Helps protect the soundbar against dust and water exposure in recreational vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuracast Connectivity:\u003c\/strong\u003e Pair two XL2 soundbars for stereo or link compatible JBL Auracast-enabled speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAI Sound Boost:\u003c\/strong\u003e Automatically adjusts audio processing in real time during playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic LED Lighting:\u003c\/strong\u003e Beat-responsive lighting and bottom-panel controls add visual customization.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe RALLYBAR XL2 combines a 35-inch soundbar format with integrated amplification, LED lighting, and a multi-driver speaker array. Its IP67 rating supports use on exposed recreational vehicles, while the Ghost White colorway complements light-colored UTV, golf cart, and marine installations. At 16.75 pounds, it is nearly 2 kg lighter than the previous-generation RALLYBAR XL.\u003c\/p\u003e\u003cp\u003eInstall the soundbar using the included mount cleats, clamps, rubber strips, straps, and hardware as appropriate for the vehicle's mounting surface or tube diameter. Connect the included 12-foot 10 AWG harness to a compatible 9-16V DC electrical system, then select Bluetooth, USB, or RCA as the music source. RCA input supports 2V, 4V, and 6V gain settings for integration with compatible source equipment.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632134971462,"sku":"JBLRALLYBARXL2WHT","price":1.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71fXJrgYuFL.jpg?v=1784396376"},{"product_id":"jbl-club-34f-3-5-two-way-car-speakers","title":"JBL Club 34F 3.5\" Two-Way Car Speakers","description":"\u003cp\u003eThe JBL Club 34F is a pair of 3-1\/2-inch two-way car speakers designed for compact factory speaker locations. They provide a practical replacement option when original small speakers have become worn, distorted, or lack clarity. With a 3-ohm nominal impedance and 89dB sensitivity, they are engineered for use in compatible vehicle audio systems.\u003c\/p\u003e\u003cp\u003eThese speakers suit drivers upgrading dash, door, or other compact speaker positions where a 3-1\/2-inch format is specified. Their two-way design combines low- and high-frequency reproduction in each speaker, helping simplify an upgrade where separate tweeters are not being added. Vehicle-specific fitment should always be checked before installation.\u003c\/p\u003e\u003cp\u003eThe Club 34F is rated for 25 watts RMS and 75 watts peak power handling per speaker. Its 90Hz to 20kHz frequency response is intended for full-range small-speaker duties, with clear upper-frequency coverage and midrange support. For systems seeking stronger low bass, these speakers can be paired with larger door speakers or a dedicated subwoofer.\u003c\/p\u003e\u003cp\u003eJBL uses its Plus One woofer cone architecture to increase cone area within the available speaker size. The woofer cone is made from acoustically damped, UV-resistant polypropylene to help maintain controlled sound while standing up to vehicle heat and humidity. A larger magnet design supports the speaker's stated power-handling capability.\u003c\/p\u003e\u003cp\u003eThe Club 34F can be used as part of a factory-speaker refresh or within a broader aftermarket system. Its 3-ohm nominal impedance should be matched with a compatible factory radio or amplifier. The pair includes a foam gasket to support installation, while vehicle-specific mounting hardware or adapters may be required depending on the application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-1\/2-Inch Two-Way Design:\u003c\/strong\u003e Fits applications requiring a compact full-range car speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25W RMS Power Handling:\u003c\/strong\u003e Supports appropriate power from a compatible audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for compatible factory or aftermarket amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Cone Architecture:\u003c\/strong\u003e Increases available woofer cone area in its class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-Resistant Polypropylene Cone:\u003c\/strong\u003e Helps withstand heat and humidity inside a vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4kHz Crossover Point:\u003c\/strong\u003e Divides frequencies between the speaker's two-way drivers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 34F uses an acoustically damped polypropylene woofer cone with UV resistance for automotive conditions. JBL's Plus One cone architecture maximizes cone area within the compact 3-1\/2-inch format, while the larger magnet design supports its 25W RMS and 75W peak ratings. The speakers are finished in black.\u003c\/p\u003e\u003cp\u003eConfirm the vehicle's speaker opening, mounting depth, terminal clearance, and impedance compatibility before purchase. JBL lists two speakers and one foam gasket in the package; grilles, screws, adapters, and wiring accessories are not listed. Use a compatible car stereo or amplifier and observe correct speaker polarity during installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632135364678,"sku":"JBLSPKCB34F","price":94.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61O0vg3p84L.jpg?v=1784396448"},{"product_id":"jbl-stage3-38f-3-5-2-way-coaxial-speakers","title":"JBL STAGE3 38F 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe JBL STAGE3 38F is a pair of 3.5-inch, 2-way coaxial car speakers made for replacing compatible factory speakers in compact locations. Its grille-free design is intended for installations behind existing vehicle panels, such as dash or corner-dash locations. This makes it a practical option for refreshing worn or limited-range factory speaker positions without adding separate tweeters.\u003c\/p\u003e\u003cp\u003eEach speaker is rated for 50 watts RMS and 400 watts peak power, with a 4-ohm nominal impedance. The 88 dB sensitivity rating and true 4-ohm design support use with a compatible factory radio or aftermarket amplifier. With a 90 Hz to 20 kHz frequency response, the pair is suited to delivering midrange and high-frequency detail in a compact speaker location.\u003c\/p\u003e\u003cp\u003eThe 2-way coaxial layout combines a woofer and tweeter in one assembly to simplify installation where space is limited. A 3\/4-inch PEI balanced dome tweeter handles high frequencies, while the polypropylene woofer is designed to provide the main midrange and upper-bass output. This integrated approach can help retain a clean factory-style installation while adding clearer treble reproduction.\u003c\/p\u003e\u003cp\u003eJBL's Plus One woofer cone architecture increases usable cone area compared with conventional woofer designs of a similar size. The polypropylene cone is reinforced with 10% glass fiber and uses a laser-etched surface treatment, while a rubber surround supports cone movement. These construction details are designed to balance compact fitment with controlled everyday playback.\u003c\/p\u003e\u003cp\u003eThe STAGE3 38F works well as part of a broader speaker upgrade, particularly where a vehicle uses small factory dash speakers alongside larger door or rear speakers. It can be connected to a compatible 4-ohm speaker output from a radio or amplifier. For systems with a subwoofer, these speakers can cover the vocal and treble range while the subwoofer handles lower bass frequencies.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50W RMS Power Handling:\u003c\/strong\u003e Supports amplifier or radio power up to 50 watts RMS per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrue 4-Ohm Load:\u003c\/strong\u003e Designed to work with compatible factory radios and amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Balanced Dome Tweeter:\u003c\/strong\u003e Provides dedicated high-frequency reproduction from a compact driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Woofer Cone:\u003c\/strong\u003e Uses increased cone area for efficient output in limited space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrille-Free Factory Fit:\u003c\/strong\u003e Intended for concealed placement behind compatible factory panels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STAGE3 38F uses a polypropylene woofer cone reinforced with 10% glass fiber, a rubber surround, and a 3\/4-inch PEI balanced dome tweeter. JBL also specifies post-consumer recycled plastic components, PVC-free wiring, and soy-ink packaging. The laser-etched cone design gives the woofer a distinctive finished appearance while retaining a compact coaxial layout.\u003c\/p\u003e\u003cp\u003eVerify the vehicle's speaker opening, mounting depth, mounting-hole pattern, and connector arrangement before purchase. The reported top-mount depth is 1.42 inches and the reported cutout diameter is 3.03 inches; adapters or a vehicle-specific wiring harness may be needed depending on the application. The package includes mounting hardware, foam gaskets, spade clips, logo badges, and a mini owner's manual, but it does not include grilles.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632139362374,"sku":"JBLSPKS338F","price":67.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61BykBUbq-L.jpg?v=1784397041"},{"product_id":"kenwood-kfc-835c-3-5-round-car-speaker-system","title":"Kenwood KFC-835C 3.5\" Round Car Speaker System","description":"\u003cp\u003eThe Kenwood KFC-835C is a pair of 3.5-inch round car speakers designed for compact factory speaker locations, especially dashboard applications. It provides a practical replacement option when original speakers have become worn, weak, or distorted. Its compact format is intended for vehicles that use a small custom-fit speaker opening.\u003c\/p\u003e\u003cp\u003eThis speaker system is suited to listeners seeking clear everyday sound from a factory head unit or a modestly powered car audio system. With 89 dB sensitivity and a 4-ohm impedance, it is designed to work with typical automotive speaker outputs. Rated input power is 10 watts per speaker, with 40 watts of peak power handling.\u003c\/p\u003e\u003cp\u003eThe KFC-835C covers a 96 Hz to 20 kHz frequency response range, supporting midrange detail and high-frequency information in a small speaker position. Its whizzer-cone design extends upper-frequency output without adding a large separate tweeter assembly. This makes it appropriate for dash locations where mounting depth is limited.\u003c\/p\u003e\u003cp\u003eKenwood specifies a water-resistant cone for added suitability in the variable conditions found inside a vehicle. The dual-cone speaker construction is paired with a compact 87.3 mm driver format and a shallow 38 mm mounting depth. These details help the KFC-835C serve as a space-conscious replacement speaker rather than a large-power system component.\u003c\/p\u003e\u003cp\u003eUse the KFC-835C as a direct-size upgrade in compatible 3.5-inch locations, or as part of a broader system refresh with matching front, rear, or door speakers. It is sold as a pair, allowing both left and right channels to be replaced together. Verify the vehicle opening, cutout, mounting depth, and factory wiring arrangement before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Custom-Fit Size:\u003c\/strong\u003e Designed for compact vehicle speaker locations, including many dash applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Watt Peak Handling:\u003c\/strong\u003e Supports short musical peaks up to 40 watts per speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Watt Rated Input:\u003c\/strong\u003e Suited to modest-power factory or aftermarket speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhizzer Cone:\u003c\/strong\u003e Helps extend high-frequency output from the compact dual-cone design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e96 Hz–20 kHz Response:\u003c\/strong\u003e Covers a broad range for everyday music and voice playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches the common impedance used by many car audio systems.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-835C uses a compact round, dual-cone layout with a water-resistant whizzer cone. Its specified 87.3 mm driver dimension, 38 mm mounting depth, and 385 g weight reflect its purpose as a shallow custom-fit speaker. The speaker is supplied as a left\/right pair and mounting material is included.\u003c\/p\u003e\u003cp\u003eConfirm that the vehicle accepts a 3.5-inch speaker and has enough clearance for the specified mounting depth before ordering. A 3-3\/16-inch cutout is listed for installation, but vehicle-specific openings and mounting patterns should always be checked. Connect each speaker to compatible 4-ohm speaker wiring with correct polarity, then secure it using the included mounting hardware.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633157333062,"sku":"KFC-835C","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71TdestEMIL.jpg?v=1784406088"},{"product_id":"mb-quart-xk2-108-3-5-2-way-coaxial-speakers","title":"MB Quart XK2-108 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe MB Quart XK2-108 is a pair of 3.5-inch 2-way coaxial car speakers designed for compact factory speaker locations. It is intended for drivers looking to replace worn or limited-range small speakers in a vehicle audio system. The coaxial format combines the speaker elements into a space-conscious assembly suited to small mounting positions.\u003c\/p\u003e\u003cp\u003eThis speaker system is rated for 70 watts RMS and 140 watts peak power per pair. Those pair-level ratings help shoppers match the speakers with an appropriate source unit or amplifier after confirming system compatibility. The compact format makes the XK2-108 a practical option where a larger replacement speaker is not possible.\u003c\/p\u003e\u003cp\u003eMB Quart lists an 88 dB sensitivity and a 55 Hz to 22 kHz frequency response for the XK2-108. This range is designed to cover midrange and high-frequency content within a small speaker location. For a system with greater low-frequency output, these speakers can be used alongside a properly matched subwoofer system.\u003c\/p\u003e\u003cp\u003eThe XK2-108 uses a 2-way coaxial design to place multiple frequency-producing elements in one speaker assembly. This approach simplifies installation compared with systems that require separate tweeter mounting locations. It is useful for vehicle locations that have limited space behind a grille or dashboard panel.\u003c\/p\u003e\u003cp\u003eBefore purchase, compare the vehicle's factory opening with the specified 3.41-inch cutout requirement and verify rear clearance for the 1.5-inch mounting depth from the flange. Confirm connector style, mounting-hole alignment, polarity, and available space behind the panel before installation. Vehicle-specific brackets, adapters, wiring harnesses, or spacers may be needed depending on the application.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Speaker Size:\u003c\/strong\u003e Fits compact speaker locations where space is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Coaxial Layout:\u003c\/strong\u003e Combines speaker elements in one mounting assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e70W RMS Per Pair:\u003c\/strong\u003e Provides a continuous power-handling reference for system matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140W Peak Per Pair:\u003c\/strong\u003e Indicates the listed short-term maximum power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e88 dB Sensitivity:\u003c\/strong\u003e Supplies a published efficiency reference for comparison.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e55 Hz–22 kHz Response:\u003c\/strong\u003e Covers a broad stated range for small car speakers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe XK2-108 is built as a compact coaxial speaker system with a 3.5-inch nominal diameter. MB Quart describes the construction as using high-quality materials for durability and reliability, but detailed cone, surround, magnet, and voice-coil specifications are not published in the confirmed product information. Its integrated 2-way layout is designed to keep the installation footprint compact.\u003c\/p\u003e\u003cp\u003eUse the 3.41-inch cutout diameter and 1.5-inch depth from the flange as starting points when checking fitment. Measure the opening, mounting-hole pattern, and clearance to HVAC ducts, window mechanisms, trim, or other components before installing. The listing does not confirm included mounting hardware, adapters, grilles, or wiring harnesses, so plan for vehicle-specific parts if required.\u003c\/p\u003e","brand":"MB Quart","offers":[{"title":"Default Title","offer_id":45633165459526,"sku":"XK2-108","price":34.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/713Epdw-I7L.jpg?v=1784407839"},{"product_id":"memphis-prxp3-3-5-2-way-coaxial-speakers","title":"Memphis PRXP3 3.5\" 2-Way Coaxial Speakers","description":"\u003cp\u003eThe Memphis PRXP3 is a compact 3.5-inch 2-way coaxial speaker designed as a direct sound-quality upgrade for many factory speaker locations. Its shallow profile helps address installations where space behind the factory grille is limited. This model is intended for listeners replacing small OEM speakers in dash, door, or other factory positions.\u003c\/p\u003e\u003cp\u003eWith 15 watts RMS and 30 watts peak power handling per speaker, the PRXP3 is suited to lower-power factory radios and modest aftermarket amplification. Its 87 dB sensitivity supports practical output from systems that do not use a high-power external amplifier. Match the speaker to a compatible 4-ohm audio channel and stay within its continuous power rating.\u003c\/p\u003e\u003cp\u003eThe speaker uses a low-profile point source tweeter to keep the coaxial assembly compact under factory grilles. A silk dome tweeter handles upper-frequency detail, while the integrated 6 dB tweeter crossover directs appropriate frequencies to the tweeter. This arrangement avoids the need for a separate external crossover for the tweeter section.\u003c\/p\u003e\u003cp\u003eA graphite-reinforced polypropylene woofer cone and rubber surround form the foundation of the PRXP3 design. These materials are selected for everyday automotive use and controlled cone movement. The result is a straightforward full-range replacement speaker with a smooth, balanced presentation for small factory locations.\u003c\/p\u003e\u003cp\u003eThe PRXP3 can be used as part of a factory-radio refresh or alongside larger replacement speakers elsewhere in the vehicle. Its 1.5-inch mounting depth and low-profile tweeter are useful where grille clearance is a concern. Confirm the available mounting depth, cutout size, wiring connection, and vehicle-specific fitment before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch 2-Way Design:\u003c\/strong\u003e Combines woofer and tweeter performance in one compact coaxial speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Source Tweeter:\u003c\/strong\u003e Low-profile tweeter design helps preserve clearance beneath factory grilles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSilk Dome Tweeter:\u003c\/strong\u003e Supports detailed high-frequency reproduction in a compact installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated 6 dB Crossover:\u003c\/strong\u003e Directs high frequencies to the tweeter without a separate crossover box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGraphite-Reinforced Polypropylene Cone:\u003c\/strong\u003e Provides a durable woofer cone for everyday vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber Surround:\u003c\/strong\u003e Helps support controlled cone movement and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PRXP3 uses a graphite-reinforced polypropylene cone, rubber surround, 7-ounce magnet, and low-profile point source tweeter. Its compact frame measures approximately 3.421 inches wide by 3.421 inches long. Grilles are not included.\u003c\/p\u003e\u003cp\u003eCheck for a 3.187-inch mounting cutout and at least 1.5 inches of top-mount depth before ordering. The speaker is rated at 4 ohms and 15 watts RMS per speaker, so it should be connected to a compatible factory-radio or amplifier channel. Vehicle-specific brackets, wiring adapters, or mounting hardware may be needed depending on the application.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633200455750,"sku":"PRXP3","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61z9Kdy0qCL.jpg?v=1784414768"},{"product_id":"pioneer-ts-a878-3-5-2-way-coaxial-car-speakers","title":"Pioneer TS-A878 3.5\" 2-Way Coaxial Car Speakers","description":"\u003cp\u003eThe Pioneer TS-A878 is a pair of compact 3.5-inch, 2-way coaxial car speakers designed for factory-speaker replacement in vehicles with limited mounting space. It is suited to drivers who want clearer sound from dash, rear-panel, or other small speaker locations without changing the rest of the audio system. The custom-fit design is intended for select GM, Ford, and Volkswagen applications, subject to measurement and vehicle-specific fitment verification.\u003c\/p\u003e\u003cp\u003eIts coaxial layout places a PEI hard-dome tweeter over the woofer, allowing a single speaker location to cover both midrange and high-frequency content. This arrangement helps provide direct, intelligible vocals and defined treble from compact factory locations. With a 60 Hz to 28 kHz frequency range, the TS-A878 is focused on full-range support rather than deep-bass duty.\u003c\/p\u003e\u003cp\u003eThe 3.5-inch carbon- and graphite-reinforced IMPP cone is made for rigidity in a compact driver, while the PEI dome tweeter is designed for smooth high-frequency reproduction. The speaker has a 4-ohm nominal impedance for use with typical car-audio speaker outputs. Its 88 dB sensitivity supports use with modest-power factory or aftermarket head units.\u003c\/p\u003e\u003cp\u003ePower handling is rated at 60 watts maximum per pair and 15 watts nominal per speaker when used with the included in-line filter. This makes the TS-A878 a sensible match for factory radio power or conservatively matched aftermarket amplification. It should be paired with appropriate high-pass filtering when system tuning allows, especially when high output is desired.\u003c\/p\u003e\u003cp\u003eFor a balanced upgrade, the TS-A878 can be used to replace small factory speakers while larger door speakers or a subwoofer handle more of the midbass and low bass. Its compact 1-3\/8-inch mounting depth helps where clearance behind the mounting surface is limited. Confirm cutout size, depth, mounting tabs, and connector compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Coaxial Design:\u003c\/strong\u003e Combines woofer and tweeter in one compact speaker assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Way Sound Reproduction:\u003c\/strong\u003e Separates high-frequency duties from the main cone for clearer detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Graphite IMPP Cone:\u003c\/strong\u003e Reinforced cone construction supports rigidity in a small driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePEI Hard-Dome Tweeter:\u003c\/strong\u003e Provides controlled, smooth high-frequency output from the center-mounted tweeter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with conventional car-radio and compatible amplifier speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom-Fit Basket:\u003c\/strong\u003e Designed for select GM, Ford, and Volkswagen speaker locations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-A878 uses a carbon- and graphite-reinforced IMPP woofer cone with a 26 mm polyetherimide hard-dome tweeter. Its compact coaxial construction places both drivers in a single round speaker chassis, and the black finish integrates discreetly into many factory locations. The speaker pair is supplied without grilles.\u003c\/p\u003e\u003cp\u003eVerify the 3-inch cutout requirement and 1-3\/8-inch mounting depth before ordering, since vehicle fitment guides are reference tools rather than guarantees. Use the included mounting hardware and speaker connection cables as applicable, maintain correct positive and negative polarity, and use the included in-line filters. These speakers are appropriate for direct replacement on a compatible head unit or for use on a conservatively power-matched amplified channel.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633235255366,"sku":"TS-A878","price":84.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61jSAo3B3CL.jpg?v=1784419715"},{"product_id":"pioneer-ts-b351pro-3-5-bullet-tweeters","title":"Pioneer TS-B351PRO 3.5\" Bullet Tweeters","description":"\u003cp\u003eThe Pioneer TS-B351PRO is a pair of 3.5-inch bullet tweeters designed to add focused high-frequency output to a car-audio system. It is built for listeners assembling high-sensitivity systems where clear upper-frequency reproduction is needed alongside mid-bass drivers and subwoofers. With a 3,000 Hz to 22,000 Hz frequency response, it is intended to handle the upper range rather than full-range or bass duties.\u003c\/p\u003e\u003cp\u003ePart of Pioneer’s P.R.O. Series, the TS-B351PRO is suited to open-show and high-SPL-oriented installations. Its 100 dB sensitivity rating helps it produce substantial output from available amplifier power. The 4-ohm nominal impedance makes it suitable for use with compatible car-audio amplification and crossover arrangements.\u003c\/p\u003e\u003cp\u003eThe tweeter uses a titanium diaphragm in a horn-style bullet design. This combination is designed for direct, efficient high-frequency projection in systems that need to remain audible at elevated listening levels. Pioneer rates the pair at 150 watts nominal power handling and 300 watts maximum power handling.\u003c\/p\u003e\u003cp\u003eAn aluminum die-cast chassis supports the tweeter assembly, while a ferrite magnet provides the motor structure. The field-serviceable tweeter unit can be repaired using Pioneer’s compatible replacement diaphragm repair kit. This makes the TS-B351PRO a practical choice for systems where serviceability is important.\u003c\/p\u003e\u003cp\u003eThese tweeters work best as part of a properly filtered multi-speaker setup, not as standalone speakers. Pioneer specifies a 3,000 Hz crossover frequency and instructs installers to use the specified network. Pair them with appropriately crossed-over mid-bass speakers, a compatible amplifier, and secure mounting hardware for a balanced system upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Bullet Tweeters:\u003c\/strong\u003e Focused high-frequency drivers for multi-speaker car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium Diaphragms:\u003c\/strong\u003e Provide a durable diaphragm material for upper-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Nominal Handling:\u003c\/strong\u003e Supports amplified systems with appropriate crossover protection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 dB Sensitivity:\u003c\/strong\u003e Helps deliver strong output with available amplifier power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Matches many compatible car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField-Serviceable Design:\u003c\/strong\u003e Allows replacement of the tweeter diaphragm assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TS-B351PRO combines a titanium tweeter diaphragm with an aluminum die-cast chassis and ferrite magnet. Its bullet-style, horn-oriented layout is made for efficient high-frequency output, and the chassis is designed to provide a rigid mounting structure. No speaker grilles are included.\u003c\/p\u003e\u003cp\u003eConfirm fitment before installation: each tweeter requires a 3-inch cutout and 1-3\/4-inch mounting depth, with a 4-inch outer diameter. Mounting screws are included, but the system must use the specified crossover network; Pioneer cautions against operating the speaker independently. Secure the capacitor body and lead wire after wiring, and keep capacitor leads away from metal parts.\u003c\/p\u003e","brand":"Pioneer","offers":[{"title":"Default Title","offer_id":45633235320902,"sku":"TS-B351PRO","price":91.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71YaxsnbEYL.jpg?v=1784419757"},{"product_id":"rockford-fosgate-gf-35-3-5-flush-mount-speaker-grilles","title":"Rockford Fosgate GF-35 3.5\" Flush-Mount Speaker Grilles","description":"\u003cp\u003eThe Rockford Fosgate GF-35 is a pair of 3.5-inch flush-mount grilles designed to protect compatible Punch V2 speakers while creating a clean, integrated panel finish. Unlike surface-mount grilles, the GF-35 installs into a cut opening so the grille sits flat against the mounting surface. It is intended for custom vehicle audio installations where exposed speaker hardware or added grille height is undesirable.\u003c\/p\u003e\u003cp\u003eThese grilles are made for owners installing compatible Rockford Fosgate speakers in doors, dash panels, kick panels, rear decks, or other custom panels. The flush design helps maintain a low-profile appearance while covering the speaker from incidental contact. They are grilles rather than speakers, so they do not add power handling or change the speaker's electrical specifications.\u003c\/p\u003e\u003cp\u003eThe GF-35 uses a removable grille mesh with keyed alignment slots and a metal bezel to create a finished installation. A C-Backer supports the mounting arrangement behind the panel, while the bezel fastens from the front. This construction conceals the primary mounting hardware once the mesh is installed.\u003c\/p\u003e\u003cp\u003eFitment is specific: the GF-35 is compatible with the Rockford Fosgate P1V2-3 and the midrange speakers in the P3V2-69C3 system. Its 4.13-inch cutout requirement and 0.93-inch mounting depth should be checked before cutting a panel. The included flange locator rings support compatible Twist-Lock speaker flanges.\u003c\/p\u003e\u003cp\u003eFor a coordinated Punch V2 upgrade, the GF-35 provides a purpose-built finishing solution instead of adapting a universal grille. It is supplied as a pair for left\/right speaker locations and includes the installation pieces needed for the flush-mount assembly. A cutout template is included to help establish the required opening before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-Mount Profile:\u003c\/strong\u003e Installs into the panel for a flat, low-profile finished appearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Fitment:\u003c\/strong\u003e Designed around compatible 3.5-inch Punch V2 speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel-Specific Compatibility:\u003c\/strong\u003e Fits P1V2-3 and P3V2-69C3 midrange speaker applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Bezel:\u003c\/strong\u003e Provides a structured front mounting and trim interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeyed Grille Mesh:\u003c\/strong\u003e Helps align the removable mesh correctly during final assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Pair Kit:\u003c\/strong\u003e Includes two grille assemblies, mounting components, and a cutout template.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GF-35 combines removable grille mesh, metal bezels, flange locator rings, and C-Backers in a flush-mount design. The grille mesh fits into keyed slots in the bezel, helping create a clean front surface with the mounting hardware covered after assembly. The black grille assembly is intended to provide physical protection while maintaining a restrained custom-install appearance.\u003c\/p\u003e\u003cp\u003eInstallation requires a 4.13-inch cutout and 0.93 inch of mounting depth. Confirm that the selected panel has no obstructions behind it before cutting, then use the included template, install the C-Backer and bezel, route speaker wiring, secure the compatible speaker, and press the aligned grille mesh into place. A drill with hole saw or jigsaw and a screwdriver are listed as required tools.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45633350959174,"sku":"GF-35","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61RBeG5O1xL_efd965c1-88a4-44e2-90be-13ab08ba9361.jpg?v=1784420829"},{"product_id":"rockford-fosgate-gs-35-3-5-surface-mount-speaker-grilles","title":"Rockford Fosgate GS-35 3.5\" Surface-Mount Speaker Grilles","description":"\u003cp\u003eThe Rockford Fosgate GS-35 is a pair of 3.5-inch surface-mount grilles made to give select Punch V2 speakers a finished, protective appearance. It installs over the compatible speaker and mounts directly to the panel surface. This makes it a practical option when a flush-mounted grille is not required.\u003c\/p\u003e\u003cp\u003eThese grilles are intended for owners of compatible Rockford Fosgate P1V2-3 speakers or the 3.5-inch midrange drivers in P3V2-69C3 component systems. They provide a dedicated-fit cosmetic and protective solution rather than a universal speaker grille. Speakers are sold separately.\u003c\/p\u003e\u003cp\u003eThe GS-35 is a passive speaker accessory and does not add power, alter impedance, or create sound on its own. Its role is to cover the speaker area while allowing the system to retain the intended installation layout. The surface-mount format adds approximately 0.96 inch of height above the mounting surface.\u003c\/p\u003e\u003cp\u003eA keyed grille mesh and bezel arrangement supports proper logo orientation and snap-in grille attachment after the speaker assembly is secured. Slotted holes in the base ring allow minor rotational adjustment for alignment. The result is a clean presentation for installations where grille height can be accommodated.\u003c\/p\u003e\u003cp\u003eThe pair includes the basic mounting components and a cutout template for installation planning. It fits into a Rockford Fosgate Punch V2 upgrade or restoration project when the specified speaker models are being used. Verify speaker model, panel clearance, and mounting dimensions before beginning the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface-Mount Format:\u003c\/strong\u003e Mounts on top of the speaker mounting surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Fitment:\u003c\/strong\u003e Designed for specified 3.5-inch Punch V2 applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated Compatibility:\u003c\/strong\u003e Fits P1V2-3 and P3V2-69C3 midrange speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSnap-In Mesh:\u003c\/strong\u003e Keyed grille mesh presses into the bezel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment Adjustment:\u003c\/strong\u003e Slotted base-ring holes allow minor rotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Pair:\u003c\/strong\u003e Includes two grilles, bezels, screws, and template.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GS-35 uses a two-piece grille arrangement consisting of grille mesh and grille bezel components. It is finished in black and is listed with Centrex and ASA plastic materials. Each grille has a 4.08-inch outer diameter and weighs 3.32 ounces.\u003c\/p\u003e\u003cp\u003eUse the supplied template to mark the opening, then confirm that no wiring, windows, or window tracks obstruct the mounting area. Position the speaker in the grille bezel, secure the assembly with the supplied self-tapping screws, and align the keyed mesh before snapping it into place. The GS-35 is intended only for compatible P1V2-3 speakers and the 3.5-inch midrange speakers used in P3V2-69C3 systems.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45633468465222,"sku":"GS-35","price":49.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81dgCS-vkJL.jpg?v=1784421737"},{"product_id":"rockford-fosgate-p1v2-3-3-5-3-way-coaxial-speakers","title":"Rockford Fosgate P1V2-3 3.5\" 3-Way Coaxial Speakers","description":"\u003cp\u003eThe Rockford Fosgate P1V2-3 is a pair of 3.5-inch, 4-ohm, 3-way coaxial car speakers designed as a replacement for small factory speakers. It is intended for vehicles with single-speaker locations such as dash, door, or rear-deck positions. The integrated tweeter and piezo super tweeter add high-frequency coverage that basic factory full-range drivers may not provide.\u003c\/p\u003e\u003cp\u003eEach pair is rated for 75 watts RMS and 150 watts peak power handling. With a 98 Hz to 25 kHz frequency response, these speakers are suited to reproducing midrange and treble detail in compact factory locations. Their 4-ohm nominal impedance is compatible with many factory and aftermarket car-audio systems.\u003c\/p\u003e\u003cp\u003eThe P1V2-3 uses a 3.5-inch mica-reinforced polypropylene curvilinear cone, Santoprene half-roll surround, and a Nomex spider. These materials are selected to support controlled cone movement and durability in a vehicle environment. A 1-inch voice coil on a vented Kapton former is used for heat dissipation during operation.\u003c\/p\u003e\u003cp\u003eA 3\/4-inch Tetolon inverted-dome tweeter and 3\/8-inch polypropylene piezo super tweeter are integrated into each coaxial speaker. The internal crossover network handles the tweeter section, while the included external bass blockers reduce low-frequency content sent to the small speakers. This arrangement helps tailor the speaker for locations where deep bass is better handled by larger speakers or a subwoofer.\u003c\/p\u003e\u003cp\u003eFor fitment flexibility, the P1V2-3 includes Twist-Lock adapters for several factory-style mounting arrangements. The speaker can be installed using front-loading or rear-loading Twist-Lock configurations, each with its own mounting-depth requirement. It is a practical choice for replacing factory 3.5-inch speakers while retaining a compact, integrated installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Way Coaxial Design:\u003c\/strong\u003e Combines a main driver, dome tweeter, and piezo super tweeter in each speaker.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e75W RMS Rating:\u003c\/strong\u003e Supports amplifier or head-unit power matched within its continuous rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with many standard factory and aftermarket car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Bass Blockers:\u003c\/strong\u003e High-pass filters reduce low-frequency demand on the compact speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist-Lock Adaptors:\u003c\/strong\u003e Helps accommodate several factory-style 3.5-inch mounting locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Crossover Network:\u003c\/strong\u003e Directs high frequencies to the tweeter section within each speaker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1V2-3 combines a mica-reinforced polypropylene cone with a chemically bonded Santoprene surround and a linear Nomex spider. Its injected-molded, glass-fiber-reinforced PA66 composite basket incorporates molded terminals for secure connections. The motor uses a Y35 ferrite structure, while the voice coil uses a vented Kapton former.\u003c\/p\u003e\u003cp\u003eConfirm the factory opening, available depth, and front-side clearance before installation. The required cutout diameter is 2.87 inches, and the included Twist-Lock adapters support front-loading and rear-loading installation methods. Use the supplied wiring hardware as appropriate, observe positive and negative terminal polarity, and check that windows, locks, and other moving vehicle parts clear the speaker before final mounting.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634213118022,"sku":"P1V2-3","price":179.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61jNcHW5aOL.jpg?v=1784428504"},{"product_id":"warzone-wz-37pti-3-5-super-midrange-speaker-pair","title":"WARZONE WZ-37PTI 3.5\" Super Midrange Speaker Pair","description":"\u003cp\u003eThe WARZONE WZ-37PTI is a pair of compact 3.5-inch super midrange speakers designed for car-audio installations where space is limited. They focus on the midrange frequencies that carry much of the detail in vocals, instruments, and spoken content. Their 4-ohm design makes them suitable for systems built around compatible car-audio amplification.\u003c\/p\u003e\u003cp\u003eThis speaker pair is intended for listeners upgrading factory locations or adding dedicated midrange drivers to a custom system. With a 60-watt RMS total system rating and 200-watt maximum system rating, the pair is suited to appropriately matched power. Its 90 dB sensitivity supports useful output without requiring excessive amplifier power.\u003c\/p\u003e\u003cp\u003eThe WZ-37PTI uses a glass fiber cone with a rubber edge to support controlled midrange reproduction and everyday durability. A 1-inch aluminum voice coil works with the 10-ounce ferrite magnet motor assembly. The specified 100 Hz to 20 kHz frequency response covers a broad range for a compact midrange driver.\u003c\/p\u003e\u003cp\u003eIts small mounting footprint helps address installations with shallow or restricted speaker locations. The speaker measures 3.36 inches in overall diameter, with a 3.1-inch cutout requirement and 1.66-inch mounting depth. Check the vehicle panel, grille clearance, and mounting surface before installation.\u003c\/p\u003e\u003cp\u003eFor a balanced system, use the WZ-37PTI pair alongside properly selected tweeters, larger midbass drivers, or a subwoofer as needed. Amplifier output, crossover settings, and installation quality will affect final performance. These speakers are a practical option when a compact dedicated midrange pair is needed in a 4-ohm car-audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5-Inch Midrange Pair:\u003c\/strong\u003e Compact drivers for space-conscious vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Designed for compatible 4-ohm car-audio amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e60W RMS System Rating:\u003c\/strong\u003e Helps guide appropriate amplifier power matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90 dB Sensitivity:\u003c\/strong\u003e Supports efficient output from modest compatible power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass Fiber Cone:\u003c\/strong\u003e Provides a rigid diaphragm for midrange reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Assembly:\u003c\/strong\u003e Uses a 10-ounce ferrite magnet and aluminum voice coil.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe WZ-37PTI combines a glass fiber cone, rubber edge, 1-inch aluminum voice coil, and 10-ounce ferrite magnet. These materials form the driver assembly used for its stated 100 Hz to 20 kHz response range. The compact round format is intended for installations where larger speakers cannot be accommodated.\u003c\/p\u003e\u003cp\u003eConfirm a 3.1-inch cutout, 1.66-inch mounting depth, and adequate clearance around the 3.36-inch overall diameter before ordering. Use secure mounting and appropriate wiring for the connected amplifier or audio system. Match amplifier gain and crossover settings carefully to the speaker pair's published power handling and intended midrange role.\u003c\/p\u003e","brand":"Warzone","offers":[{"title":"Default Title","offer_id":45668383227974,"sku":"WZ-37PTI","price":39.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71o9LFh8VeL.jpg?v=1784452155"}],"url":"https:\/\/audiowatt.store\/collections\/3-5-inch-speakers.oembed","provider":"Audio Watt Store","version":"1.0","type":"link"}