{"title":"2-Channel Amplifiers","description":null,"products":[{"product_id":"audiobank-ad1500-2-2-channel-class-ab-car-amplifier","title":"Audio360 AD1500.2 2-Channel Class AB Car Amplifier","description":"\u003cp\u003eThe Audio360 AD1500.2 is a compact 2-channel car audio amplifier designed to add dedicated power to an aftermarket speaker system or a single bridged subwoofer setup. It provides separate left and right channels for stereo operation, with the option to combine both channels for mono use. This flexibility makes it suitable for upgrades that need more output than a head unit's built-in amplification can provide.\u003c\/p\u003e\u003cp\u003eFor stereo systems, the AD1500.2 is rated at 120 watts RMS per channel at 4 ohms or 180 watts RMS per channel at 2 ohms. In bridged mode, it is rated for 360 watts RMS into a 4-ohm load. Match connected speakers or a subwoofer to these RMS ratings and supported impedance configurations for an appropriate installation.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a Class AB design and is specified with a 90 dB signal-to-noise ratio. Its adjustable gain control helps match the amplifier to the output level of a compatible source unit. Selectable high-pass, low-pass, and full-range crossover modes allow the amplifier to be configured for speakers or a subwoofer application.\u003c\/p\u003e\u003cp\u003eDual 25-amp fuses are fitted for amplifier protection, for a combined 50-amp fuse rating. The amplifier also includes an adjustable bass-boost control for system tuning. As with any car-audio amplifier, gain and bass boost should be set carefully to help avoid audible distortion and excessive speaker stress.\u003c\/p\u003e\u003cp\u003eAt 260 x 228 x 51 mm, the AD1500.2 is sized for installations where available mounting space is limited. It uses RCA signal inputs, a remote turn-on connection, and dedicated speaker output terminals. It can serve as a focused power upgrade for a pair of speakers, a component system, or one properly matched bridged subwoofer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Output:\u003c\/strong\u003e Powers a left and right speaker channel in stereo mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Configuration:\u003c\/strong\u003e Combines both channels for one 4-ohm mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass AB Circuitry:\u003c\/strong\u003e Uses a conventional Class AB amplifier design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRMS Power Ratings:\u003c\/strong\u003e Delivers up to 180 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Crossovers:\u003c\/strong\u003e Offers HPF, LPF, and full-range operating modes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 25A Fuses:\u003c\/strong\u003e Provides a combined onboard fuse rating of 50 amps.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD1500.2 uses a compact freestanding amplifier format measuring 260 x 228 x 51 mm. Published information confirms the compact chassis dimensions and control layout, including crossover selection, gain adjustment, and bass boost. Enclosure material and finish specifications are not published.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a dry, secure, well-ventilated location with clearance for wiring and cooling. Use RCA cables from a compatible source unit, connect the remote turn-on lead, and use suitably sized power and ground wiring; installation guidance calls for 8 AWG or larger power and ground cable and an external inline fuse near the battery. For bridged operation, use a single 4-ohm or higher load connected according to the amplifier's bridged terminal markings.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613441056838,"sku":"AD1500-2","price":132.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81VD0EG1a0L.jpg?v=1784350657"},{"product_id":"audiotek-at-1800s-2-channel-car-amplifier","title":"Audiotek AT-1800S 2-Channel Car Amplifier","description":"\u003cp\u003eThe Audiotek AT-1800S is a two-channel, full-range car audio amplifier for adding external amplification to speakers or subwoofers. It is designed for systems that need more output flexibility than a head unit's built-in amplifier can provide. The amplifier is rated at up to 1800 watts maximum power and supports stereo, bridged, and tri-mode system configurations.\u003c\/p\u003e\u003cp\u003eThis Class A\/B model is intended for listeners building a basic speaker upgrade, a subwoofer-focused setup, or a mixed car audio system. Its 2-ohm-stable design gives installers more options when matching compatible speaker loads. The full-range design also allows it to be used beyond dedicated bass duties when configured appropriately.\u003c\/p\u003e\u003cp\u003eThe AT-1800S provides a continuously variable low-pass crossover and bass-boost adjustment for tailoring low-frequency output. An included remote subwoofer control gives the driver convenient access to bass-level adjustment from the cabin. Variable input gain helps match the amplifier to the output level of the connected source unit.\u003c\/p\u003e\u003cp\u003eFor source integration, the amplifier offers nickel-plated RCA inputs as well as speaker-level inputs. This supports use with aftermarket receivers that provide RCA preouts and with systems that need a high-level input connection. A remote turn-on\/turn-off circuit is also included for coordinated amplifier operation with the vehicle audio system.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a MOSFET pulse-width-modulated power supply and includes thermal and speaker-short protection circuitry. Power and protection LED indicators provide a quick operating-status reference. These features make the AT-1800S a practical component for a planned car audio upgrade when matched with compatible speakers, wiring, and source equipment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class A\/B Design:\u003c\/strong\u003e Supports stereo amplification for speakers or a bridged configuration for a compatible load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Accommodates compatible low-impedance speaker wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1800-Watt Maximum Rating:\u003c\/strong\u003e Provides the manufacturer-marketed maximum power figure for system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Lets the driver adjust subwoofer-level output from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Supports speaker-level wiring and RCA source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection and Status LEDs:\u003c\/strong\u003e Helps identify power status and protection activation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-1800S uses a heavy-duty aluminum-alloy heat sink to support heat dissipation during operation. Its Class A\/B amplifier architecture, MOSFET power supply, and front-panel control layout are designed for conventional mobile-audio installations. Power and protection LED indicators provide visible status feedback.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry, ventilated location with clearance around the heat sink. Connect it through either the nickel-plated RCA inputs or speaker-level inputs, then set gain, crossover, and bass-boost controls to suit the connected speakers or subwoofers. Confirm final speaker impedance and bridged or tri-mode wiring with the amplifier documentation before powering the system.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614105002054,"sku":"AT-1800S","price":106.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/719mwjbqZCS.jpg?v=1784358992"},{"product_id":"audiotek-at-2400s-2-channel-car-amplifier","title":"Audiotek AT-2400S 2-Channel Car Amplifier","description":"\u003cp\u003eThe Audiotek AT-2400S is a 2-channel, full-range car amplifier designed to add external amplification to a 12V vehicle audio system. It is rated for 2400 watts of peak output and supports both speaker and subwoofer applications. Its 2-ohm-stable design provides flexibility when matching compatible speaker loads.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to installers building a basic two-channel system, adding power to front or rear speakers, or configuring an appropriate subwoofer setup. RCA and speaker-level inputs allow it to connect with a variety of source-unit signal configurations. A remote turn-on\/turn-off circuit supports integration with a vehicle audio system.\u003c\/p\u003e\u003cp\u003eThe AT-2400S uses Class A-B operation and is described as a full-range amplifier, allowing it to handle low, mid, and high-frequency program material. A continuously variable input gain control helps match the amplifier to the source signal. It also includes adjustable bass boost and a variable low-pass crossover for system tuning.\u003c\/p\u003e\u003cp\u003eA bridgeable MOSFET amplifier design and tri-mode capability provide configuration flexibility for compatible installations. Its MOSFET pulse-width-modulated power supply is intended to support stable amplifier operation. The published 2400-watt rating is a peak-power figure; an RMS power specification is not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eThe chassis uses a heavy-duty aluminum-alloy heat sink to manage heat during operation. Thermal and speaker-short protection circuitry help safeguard the amplifier, while LED power and protection indicators provide at-a-glance operating status. A remote subwoofer control with bass knob is included for convenient bass-level adjustment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Output:\u003c\/strong\u003e Supports stereo speaker systems or compatible subwoofer applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Accommodates compatible low-impedance speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A-B Design:\u003c\/strong\u003e Provides full-range amplification for varied system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Configuration:\u003c\/strong\u003e Adds flexibility for compatible single-channel setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Lets you adjust bass level from the included knob.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Includes thermal and speaker-short protection features.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-2400S has a surface-mount form factor with a heavy-duty aluminum-alloy heat sink. Its connection and control set includes nickel-plated RCA inputs, speaker-level inputs, LED status indicators, gain control, crossover adjustment, and bass adjustment. The amplifier also uses a soft turn-on circuit and remote turn-on\/turn-off capability.\u003c\/p\u003e\u003cp\u003eInstall the amplifier securely on an appropriate surface with adequate ventilation around the heat sink. It is intended for 12V vehicle systems and can accept either RCA or speaker-level audio input. Match connected speakers and subwoofers to the amplifier's supported load requirements, and use the gain, crossover, and bass controls to integrate it with the rest of the system.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614105526342,"sku":"AT-2400S","price":138.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81mzS_D2CVS.jpg?v=1784359055"},{"product_id":"audiotek-at-3500s-2-channel-car-amplifier","title":"Audiotek AT-3500S 2-Channel Car Amplifier","description":"\u003cp\u003eThe Audiotek AT-3500S is a 2-channel car amplifier designed to add dedicated amplification to a vehicle audio system. It is intended for powering a pair of speakers or supporting a compatible subwoofer setup through stereo or bridged operation. With 2-ohm-stable stereo operation, it gives installers flexibility when matching compatible speaker loads.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to listeners upgrading beyond head-unit power and seeking adjustable control over low-frequency output. Its Class A-B design and full-range capability allow it to be used in systems focused on amplified speakers, bass reinforcement, or a combination of both. The selectable operating modes and adjustable controls help tailor the amplifier to the role it serves in the system.\u003c\/p\u003e\u003cp\u003eThe AT-3500S is rated for up to 3500 watts maximum output. A continuously variable low-pass crossover provides a 35 Hz to 160 Hz adjustment range for subwoofer-oriented setups, while the bass boost control offers adjustment from 0 to +18 dB. An included remote bass knob provides a convenient way to adjust bass level from the listening position.\u003c\/p\u003e\u003cp\u003eIts power section uses a MOSFET pulse-width-modulated power supply, and the amplifier includes soft turn-on operation. Nickel-plated RCA inputs and speaker-level inputs support connection to source units with either low-level preamp outputs or speaker-level outputs. The amplifier also uses a remote turn-on\/turn-off circuit for integration with a vehicle audio system.\u003c\/p\u003e\u003cp\u003eFor protection during operation, the AT-3500S includes thermal and speaker-short protection circuitry, along with power and protection LED indicators. Its heavy-duty aluminum-alloy heatsink is designed to help dissipate heat during use. This makes it a practical component for a properly wired, ventilated aftermarket audio installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel Design:\u003c\/strong\u003e Supports stereo speaker systems or a bridged mono configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Accommodates compatible low-impedance stereo speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3500W Maximum Output:\u003c\/strong\u003e Provides a stated maximum-power rating for system planning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Low-Pass Crossover:\u003c\/strong\u003e Adjusts the low-pass point from 35 Hz to 160 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Knob:\u003c\/strong\u003e Lets the listener adjust bass level from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Helps protect against thermal and speaker-short fault conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-3500S uses a heavy-duty aluminum-alloy heatsink and a surface-mount amplifier format. Nickel-plated RCA connections are provided alongside speaker-level input capability. Power and protection LEDs provide at-a-glance operating-status feedback.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a secure surface with adequate airflow and keep it away from moisture and excessive heat. It requires connection to a 12V vehicle electrical system, including battery, ground, remote turn-on, input, and speaker wiring. Use stereo wiring with loads of 2 ohms or higher per channel, or use a 4-ohm-or-higher load when operating the amplifier bridged.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614173618246,"sku":"AT-3500S","price":148.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/710ZJpJQ76S.jpg?v=1784359154"},{"product_id":"audiotek-at-5000s-2-channel-car-amplifier","title":"Audiotek AT-5000S 2-Channel Car Amplifier","description":"\u003cp\u003eThe Audiotek AT-5000S is a 2-channel car audio amplifier designed to add external amplification to speakers or compatible subwoofer setups. It is intended for systems that need more output capability than a head unit’s built-in amplifier can provide. The amplifier is rated for up to 5000 watts of stated maximum power and supports 2-ohm-stable operation. Its full-range design allows it to be considered for speaker-focused or bass-focused installations.\u003c\/p\u003e\u003cp\u003eThis Class A-B amplifier is bridgeable, providing installation flexibility for users building a two-channel stereo system or a bridged single-channel configuration. It is also listed as tri-mode capable, which can support mixed speaker and subwoofer arrangements when the system is designed correctly. Matching speaker impedance and power handling remains important for a safe installation. The AT-5000S is suited to aftermarket car audio systems using an external amplifier rack or dedicated mounting location.\u003c\/p\u003e\u003cp\u003eThe AT-5000S uses a MOSFET pulse-width-modulated power supply to manage power conversion within the amplifier. A continuously variable input gain control helps match the amplifier to the output level of the connected source unit. It also includes a continuously variable low-pass crossover control and bass boost adjustment listed from 0 to +18 dB. These controls give the installer tools to tailor the amplifier’s role in the overall system.\u003c\/p\u003e\u003cp\u003eFor signal connection, the amplifier provides nickel-plated RCA inputs and speaker-level inputs. This gives installers options when connecting an aftermarket receiver or a factory-style source that requires speaker-level signal integration. A remote turn-on\/turn-off circuit supports switched operation with the vehicle audio system. Remote subwoofer control is also included for convenient adjustment of bass level from the cabin.\u003c\/p\u003e\u003cp\u003eThe chassis uses a heavy-duty aluminum alloy heat sink to help dissipate heat during operation. Thermal and speaker-short protection circuitry are included to help protect the amplifier and connected system when a fault condition occurs. LED power and protection indicators provide at-a-glance operating status. For a complete installation, the amplifier requires properly sized power, ground, remote-turn-on, signal, speaker, and fuse-protected battery wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel Design:\u003c\/strong\u003e Supports stereo speaker systems or a bridged amplifier configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stability:\u003c\/strong\u003e Designed to operate with 2-ohm speaker loads per channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A-B Operation:\u003c\/strong\u003e Provides a conventional full-range amplifier platform for aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOSFET PWM Power Supply:\u003c\/strong\u003e Manages internal power conversion for amplifier operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Lets the user adjust bass output from the listening position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Indicators:\u003c\/strong\u003e LED status lights show power and protection conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-5000S has an aluminum alloy heat-sink chassis with end-panel power and speaker terminals. Its design includes dedicated connections for battery power, ground, remote turn-on, stereo speaker outputs, RCA-level input, and speaker-level input. The external heat sink and integrated protection circuitry are intended to support dependable use in an automotive environment.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure, well-ventilated surface away from moisture and direct heat sources. Use a properly fused power cable at the battery, a short solid ground connection to bare vehicle metal, and wiring sized appropriately for the installation. Configure gain, crossover, bass boost, speaker impedance, and bridging only after confirming compatibility with the connected speakers or subwoofers.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614186594374,"sku":"AT-5000S","price":158.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/711OVbvvnOS.jpg?v=1784359551"},{"product_id":"cerwin-vega-cvm3-2-channel-bass-maximizer-processor","title":"Cerwin-Vega CVM3 2-Channel Bass Maximizer Processor","description":"\u003cp\u003eThe Cerwin-Vega CVM3 is a 2-channel bass maximizer processor designed to shape and restore low-frequency information before it reaches the next component in a car audio system. It is intended for systems that need more control over bass response than a source unit or amplifier adjustment alone can provide. RCA inputs and outputs allow it to be installed in the signal path ahead of an amplifier, equalizer, or crossover.\u003c\/p\u003e\u003cp\u003eIts bass driver circuit recreates low-frequency content and adds it back into the signal path, while the bass equalization circuit contours the restored bass for the connected speaker system. A Sweep control selects the center frequency affected by the restoration circuit, and a Wide control adjusts the range of frequencies it influences. This makes the CVM3 suitable for tailoring bass character to the vehicle, music, subwoofer system, and enclosure.\u003c\/p\u003e\u003cp\u003eThe CVM3 supports signals up to 15V RMS at its balanced differential RCA inputs and provides up to 13.2V peak output. Its high-headroom PWM power supply, 133 dB signal-to-noise ratio, and 0.0025% THD specification support clean signal handling within a properly configured system. The processor is designed for use with a full-range source signal.\u003c\/p\u003e\u003cp\u003eA wired dash-mount remote controller brings bass adjustment closer to the driver. Its LED indicator becomes brighter as bass effect is increased and dimmer as it is reduced. The processor also includes master volume, sub volume, bass output, Sweep, Wide, and adjustable subsonic controls for system-specific setup.\u003c\/p\u003e\u003cp\u003eFor subwoofer upgrades, the CVM3 fits between an RCA-equipped source or signal chain and the downstream crossover, equalizer, or amplifier. The manual specifies placing it before any crossover because it needs a full-range signal to operate properly. It can be a useful addition when building a dedicated bass section around a compatible amplifier and subwoofer system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Channel RCA Signal Path:\u003c\/strong\u003e Uses RCA preamp inputs and outputs for in-line system integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver Circuit:\u003c\/strong\u003e Recreates and injects low-frequency information into the audio signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSweep And Wide Controls:\u003c\/strong\u003e Adjust bass restoration center frequency and affected frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Subsonic Control:\u003c\/strong\u003e Sets the subsonic frequency from 35 Hz to 120 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDash-Mount Remote:\u003c\/strong\u003e Provides in-car bass adjustment with an LED level indicator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Differential Inputs:\u003c\/strong\u003e Help minimize induced noise in the RCA signal path.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVM3 uses a compact processor layout with RCA signal connections, a power connector, onboard bass controls, and a separate wired dash-mount remote controller. Cerwin-Vega does not publish a chassis-material specification. Its design includes balanced differential RCA inputs, a high-headroom PWM power supply, and selectable internal output and isolation settings for qualified installers.\u003c\/p\u003e\u003cp\u003eConnect the RCA outputs to the next component after the processor, such as an amplifier, equalizer, or crossover, and feed the CVM3 a full-range signal. Power wiring requires 12V B+, chassis ground, and a 12V remote turn-on lead; the manual advises placing the processor before any device with a crossover. Set the processor conservatively at first, then match its output setting and controls to the amplifier input voltage and connected subwoofer system.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614305968198,"sku":"CER-CVM3","price":163.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81di5WCb7uL.jpg?v=1784365552"},{"product_id":"cerwin-vega-cvp700-2-2-channel-class-d-car-amplifier","title":"Cerwin-Vega CVP700.2 2-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Cerwin-Vega CVP700.2 is a compact 2-channel Class D car amplifier for adding dedicated power to an aftermarket or factory-based audio system. It is designed for installations where space is limited but additional speaker or subwoofer amplification is needed. Its small chassis can be placed in locations such as under a seat or behind an interior panel when properly mounted and ventilated.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to drivers upgrading front speakers, rear speakers, or a single bridged subwoofer channel. It delivers 80 watts RMS per channel at 4 ohms, 160 watts RMS per channel at 2 ohms, or 310 watts RMS bridged at 4 ohms. These output options allow it to support a range of two-speaker and single-subwoofer system layouts.\u003c\/p\u003e\u003cp\u003eThe CVP700.2 uses a Class D amplifier platform with a full MOSFET DC-DC PWM power supply. Its rated frequency response spans 10 Hz to 30 kHz, supporting full-range speaker applications as well as filtered subwoofer duty. Adjustable high-pass and low-pass filters help tailor the amplifier output to the speakers being powered.\u003c\/p\u003e\u003cp\u003eHigh-level inputs with automatic turn-on support integration with compatible factory radios, while RCA inputs support aftermarket source units. The gain control provides a 0.25V to 6V input-sensitivity range for matching the amplifier to the source signal. A selectable HPF, LPF, or flat crossover mode helps adapt the channels to component speakers, coaxial speakers, or a bridged subwoofer.\u003c\/p\u003e\u003cp\u003eProtection features include short-circuit, low-impedance, reverse-polarity, and overheating protection. Power and protection status indication helps identify normal operation or a protection condition. For a complete upgrade, pair the CVP700.2 with speakers or a bridged 4-ohm subwoofer whose RMS handling and impedance are appropriate for its rated output.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Powers a pair of speakers or one bridged 4-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis:\u003c\/strong\u003e Fits more easily in space-limited vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e160W x 2 at 2 Ohms:\u003c\/strong\u003e Provides higher output for compatible stereo speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Input with Auto Turn-On:\u003c\/strong\u003e Supports compatible factory-radio integration without a separate remote signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e High-pass and low-pass filtering helps match the amplifier to the system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Protection Circuits:\u003c\/strong\u003e Helps protect against short circuit, heat, polarity, and low-impedance conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP700.2 has a small 7.28 x 4.92 x 1.93-inch chassis, a double-sided 2-layer circuit board, and surface-mount-device construction. Its Class D design and MOSFET DC-DC PWM power supply are intended to provide an efficient compact amplifier platform. The chassis includes power, speaker, RCA, and high-level input connections, along with crossover, gain, and bass-boost controls.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely to a stable vehicle surface with adequate ventilation, avoiding cardboard or flexible plastic trim panels. Use a properly fused power connection, a short solid chassis ground, and correctly sized wiring; a 4 AWG amplifier wiring kit is recommended for installation. Keep stereo speaker loads at 2 ohms or higher per channel, and use a 4-ohm or higher load when the amplifier is bridged.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614315274310,"sku":"CER-CVP700-2","price":170.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Un3DzUOmL.jpg?v=1784366067"},{"product_id":"cerwin-vega-s9500-2d-stroker-2-channel-class-d-amplifier","title":"Cerwin-Vega S9500.2D Stroker 2-Channel Class-D Amplifier","description":"\u003cp\u003eThe Cerwin-Vega S9500.2D is a two-channel, full-range Class-D car amplifier designed to add dedicated power to a pair of speakers or a compatible bridged subwoofer setup. It provides 200 watts RMS per channel at 4 ohms and 250 watts RMS per channel at 2 ohms. This makes it a practical choice for upgrading factory-powered speakers or building a compact amplified system.\u003c\/p\u003e\u003cp\u003eIts two-channel layout supports stereo speaker systems, including component sets and coaxial speakers, while its bridged mode can power one 4-ohm subwoofer. The amplifier is stable to 2 ohms per channel in stereo operation. Variable high-pass and low-pass filters help tailor the output for speakers or bass-focused applications.\u003c\/p\u003e\u003cp\u003eThe S9500.2D uses a full-range Class-D topology with a full PWM power supply. This design is intended to provide efficient power delivery in a compact chassis while helping manage heat during normal operation. Its published bandwidth extends from 10 Hz to 35 kHz, allowing use in full-range system designs.\u003c\/p\u003e\u003cp\u003eFor signal integration, the amplifier supports low-level RCA input and high-level input capability. It also provides REM, DC-offset, and VOX signal-sensing turn-on options, which can simplify installation with a variety of source units. A pass-through RCA output is available for sending signal to an additional amplifier.\u003c\/p\u003e\u003cp\u003eThe amplifier includes a wired bass-level control and an illuminated Cerwin-Vega logo. Its compact 11.81-inch-long chassis is suited to installations where available mounting space matters. Use it as a dedicated stereo amplifier, or bridge its channels for a single 4-ohm woofer in a properly matched system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class-D Design:\u003c\/strong\u003e Powers a stereo speaker pair or a bridged 4-ohm subwoofer configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Per Channel:\u003c\/strong\u003e Delivers rated stereo output at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 35 Hz to 350 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultiple Turn-On Modes:\u003c\/strong\u003e Supports REM, DC-offset, and VOX signal-sensing activation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Helps integrate the amplifier with aftermarket or compatible factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass-Level Control:\u003c\/strong\u003e Lets the user adjust bass output level from the listening position.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe S9500.2D uses a compact full-range Class-D platform with a 4-layer PCB and surface-mount component construction. Its chassis includes an illuminated Cerwin-Vega logo, onboard crossover controls, input-level selection, and power\/protection status indication. The published dimensions are 11.81 x 7.25 x 2.0 inches.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure, dry surface with airflow around the chassis, away from direct heat and moisture. The manual specifies a minimum 8 AWG power and ground connection, with terminals accepting up to 4 AWG wire; use a 50A battery-side fuse and keep speaker loads at or above 2 ohms stereo or 4 ohms bridged. Set the crossover mode, input level, gain, and turn-on method to match the connected source unit and speakers.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615937978438,"sku":"CER-S91100-5D","price":857.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71gBDXdqfhL.jpg?v=1784368451"},{"product_id":"crunch-cra-1000-2-2-channel-class-d-car-amplifier","title":"Crunch CRA-1000.2 2-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Crunch CRA-1000.2 is a compact two-channel car audio amplifier for adding external power to a vehicle sound system. It can be used to drive a pair of speakers in stereo or a compatible speaker load in bridged mono. Its high-level and RCA input options support use with many aftermarket and factory-style source-unit installations.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners building a system around upgraded full-range speakers, component speakers, or a bridged subwoofer application. It provides 250 watts per channel at 4 ohms, 500 watts per channel at 2 ohms, or 1,000 watts bridged at 4 ohms. Adjustable high-pass and low-pass crossovers help direct the appropriate frequency range to the connected speakers.\u003c\/p\u003e\u003cp\u003eThe CRA-1000.2 uses a Class D amplifier topology designed for efficient operation in a compact chassis. Crunch specifies a switch-mode power supply and SPEED-FET MOSFET output-device technology. A low-noise preamplifier circuit is used to help keep the incoming source signal clean through amplification.\u003c\/p\u003e\u003cp\u003eSystem tuning is handled through fully adjustable 12 dB-per-octave crossover controls. Both the high-pass and low-pass ranges are adjustable from 40 Hz to 400 Hz, allowing the amplifier to be configured for full-range speakers or a low-frequency application. The input sensitivity range is specified at 0.2 to 6 volts.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the amplifier offers RCA inputs for aftermarket signal sources and high-level inputs for systems without RCA outputs. Signal-sensing remote turn-on can simplify integration with compatible factory audio systems. An output connection can also provide signal to a second amplifier in a larger multi-amplifier setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Provides efficient power in a compact car-audio amplifier format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Power Configuration:\u003c\/strong\u003e Runs stereo at 2 or 4 ohms, or bridged at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable 12 dB Crossovers:\u003c\/strong\u003e Helps match output frequency range to speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports aftermarket radios and compatible factory-audio integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch-Mode Power Supply:\u003c\/strong\u003e Designed to provide stable amplifier power delivery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Status Indicator:\u003c\/strong\u003e LED diagnostics monitor overload and speaker-short protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CRA-1000.2 has a black compact chassis with an aluminum heat sink using Crunch Quick Thermal Dispersion Technology. Nickel-plated brass connection terminals are designed to resist corrosion, while screw-down connectors provide secure cable attachment. The amplifier is specified with 4 AWG power and ground terminals and 8 AWG speaker terminals.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a location with adequate ventilation and do not mount it upside down. Crunch specifies an external 50A fuse and recommends 4-gauge copper power and ground cable for this model. Use RCA inputs when available, or connect the high-level input for source units without RCA outputs; set crossover and level controls to suit the connected speakers and system design.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45621156675654,"sku":"CRA-1000-2","price":146.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51IUYIQAGYL.jpg?v=1784371401"},{"product_id":"crunch-dr-2125-2d-2-channel-class-d-car-amplifier","title":"Crunch DR-2125-2D 2-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Crunch DR-2125-2D is a compact two-channel car audio amplifier designed to add external amplification to a vehicle sound system. It can power a pair of speakers in stereo or a compatible subwoofer through its bridged-mono configuration. Its Class D design is suited to installations where output capability and a small mounting footprint both matter.\u003c\/p\u003e\u003cp\u003eThis amplifier is a practical option for listeners building a subwoofer-focused system or upgrading beyond head-unit power. The manufacturer lists output ratings of 2 x 530 watts at 4 ohms, 2 x 1060 watts at 2 ohms, or 1 x 2125 watts bridged at 4 ohms. Matching the amplifier to compatible speaker impedance and power handling is essential for a reliable installation.\u003c\/p\u003e\u003cp\u003eVariable high-pass and low-pass filters allow the DR-2125-2D to be configured for full-range speakers or bass duty. Both crossover sections adjust from 40Hz to 400Hz with a 12dB-per-octave slope. An onboard electronic equalizer and adjustable input sensitivity provide additional control when integrating with a source unit.\u003c\/p\u003e\u003cp\u003eCrunch uses proprietary SPEED-FET MOSFET output components and a pulse-width-modulated power supply in this V-DRIVE series model. Quick Thermal Dispersion technology adds an aluminum heat sink to help manage operating heat. The specified frequency response is 20Hz to 20kHz, with total harmonic distortion rated below 0.5%.\u003c\/p\u003e\u003cp\u003eThe built-in LED VU meter provides visual level feedback during setup, while selectable logo lighting supports VU-meter, constant-red, or off modes. RCA inputs, screw-down terminals, and LED protection diagnostics support a straightforward installation. It can be used in stereo, bridged mono, or stereo\/bridged-mono system configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass D Topology:\u003c\/strong\u003e Efficient amplification in a compact chassis for vehicle audio upgrades.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Power Modes:\u003c\/strong\u003e Runs stereo channels or a 4-ohm bridged mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e HPF and LPF controls tailor output from 40Hz to 400Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED VU Meter:\u003c\/strong\u003e Provides visual feedback to assist with level adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTD Aluminum Heat Sink:\u003c\/strong\u003e Helps manage heat during normal music playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Diagnostics:\u003c\/strong\u003e Lighted indicators monitor overload and speaker-short protection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DR-2125-2D has a black V-DRIVE chassis with an aluminum QTD heat sink, nickel-plated brass connection terminals, and screw-down connectors. Its compact listed chassis dimensions are 6.06 inches long, 5.83 inches wide, and 2.2 inches high. Selectable logo illumination can be set to constant red, VU-meter response, or off.\u003c\/p\u003e\u003cp\u003eUse 4 AWG cable for the 12V and ground terminals and 8 GA speaker wire at the amplifier terminals. The manufacturer specifies an external 100A fuse, with the power cable fused within 18 inches of the battery terminal. Mount the amplifier securely in a ventilated location, keep it right-side up, use a clean bare-metal chassis ground close to the amplifier, and set gain carefully after completing the wiring.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45622930276422,"sku":"DR-2125-2D","price":110.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71-1wvB0nlL.jpg?v=1784372358"},{"product_id":"crunch-dr-3125-2d-2-channel-class-d-car-amplifier","title":"Crunch DR-3125-2D 2-Channel Class D Car Amplifier","description":"\u003cp\u003eThe Crunch DR-3125.2D is a compact two-channel Class D car audio amplifier designed to add external amplification to a compatible vehicle sound system. It supports stereo operation or bridged mono operation, allowing it to be used with a pair of speakers or a compatible subwoofer setup. Its universal-fit format makes it suitable for custom car-audio installations rather than a direct replacement for a factory radio.\u003c\/p\u003e\u003cp\u003eCrunch rates this V-DRIVE amplifier at up to 2 x 1,560 watts at 2 ohms, 2 x 780 watts at 4 ohms, or 3,125 watts bridged at 4 ohms. These are manufacturer maximum-power ratings, so system matching should account for the impedance and power-handling limits of the connected speakers. The amplifier is stable to 2 ohms per channel in stereo and requires a 4-ohm load when bridged.\u003c\/p\u003e\u003cp\u003eFor system tuning, the DR-3125.2D includes variable electronic high-pass and low-pass crossovers. Both crossover controls adjust from 40 Hz to 400 Hz with a 12 dB-per-octave slope, giving installers flexibility when building full-range, component-speaker, or subwoofer-oriented systems. An onboard electronic equalizer function further supports frequency tailoring at the amplifier.\u003c\/p\u003e\u003cp\u003eThe amplifier uses proprietary Crunch SPEED-FET MOSFET output devices and a pulse-width-modulated power supply. Its Quick Thermal Dispersion aluminum heat sink is designed to manage operating heat in a compact chassis. A low-noise preamplifier circuit, RCA inputs, and specified signal performance figures support connection to a compatible aftermarket source unit.\u003c\/p\u003e\u003cp\u003eAn integrated LED VU meter provides a visual reference during gain adjustment, while selectable logo illumination can be set to constant red, VU-meter response, or off. Protection-status lighting is provided for overload and speaker-short monitoring. This amplifier is a practical choice for an installer building a wired, RCA-based upgrade system with appropriately matched speakers, subwoofers, wiring, and external fuse protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Provides stereo amplification or bridged mono capability in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3125-Watt Maximum Output:\u003c\/strong\u003e Supports up to 2 x 1,560 watts at 2 ohms or 3,125 watts bridged at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable 12 dB Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 40 Hz to 400 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED VU Meter:\u003c\/strong\u003e Gives a visual reference when setting amplifier gain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQTD Aluminum Heat Sink:\u003c\/strong\u003e Helps disperse heat during normal operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Logo Lighting:\u003c\/strong\u003e Choose constant red, VU response, or no logo illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DR-3125.2D has a black V-DRIVE chassis with an aluminum QTD heat sink, nickel-plated brass terminals, and screw-down connectors. Its compact amplifier dimensions are 7.64 inches long, 5.83 inches wide, and 2.2 inches high. The end panel includes LED diagnostics for overload and speaker-short protection, plus illumination and VU-meter functionality.\u003c\/p\u003e\u003cp\u003eInstall the amplifier on a secure surface with adequate ventilation and do not mount it upside down. It uses RCA signal inputs, 4 AWG power and ground terminals, 8 AWG speaker terminals, and an external 125A fuse requirement. Use a compatible 2-ohm-or-higher stereo load or a 4-ohm bridged load, and set gain and crossover controls after the source unit and speakers are connected.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45623491887174,"sku":"DR-3125-2D","price":124.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/7121pfGtOLL.jpg?v=1784372801"},{"product_id":"crunch-gp-1000-2-2-channel-car-audio-amplifier","title":"Crunch GP-1000.2 2-Channel Car Audio Amplifier","description":"\u003cp\u003eThe Crunch GP-1000.2 is a two-channel car audio amplifier designed to add external amplification to a vehicle sound system. It can power a pair of speakers in stereo or drive a compatible subwoofer through its bridged mono configuration. This flexibility makes it suitable for focused speaker upgrades, bass additions, or mixed system layouts.\u003c\/p\u003e\u003cp\u003eCrunch lists output ratings of 2 x 500 watts at 2 ohms, 2 x 250 watts at 4 ohms, and 1 x 1,000 watts bridged at 4 ohms. The amplifier can operate in stereo, bridged mono, or stereo\/bridged mono simultaneously. Its Class A\/B topology is intended for systems that prioritize conventional full-range amplification and installation versatility.\u003c\/p\u003e\u003cp\u003eA variable electronic crossover with a 12 dB-per-octave slope helps tailor the amplified signal to the speakers being used. Selectable full-range, high-pass, and low-pass crossover modes support common speaker and subwoofer applications. A built-in bass control and switchable bass boost settings provide additional low-frequency adjustment.\u003c\/p\u003e\u003cp\u003eThe GP-1000.2 accepts low-level RCA input and high-level speaker input, allowing it to work with many aftermarket or factory-source systems. Its low-noise preamplifier circuit is designed to process incoming source signals before amplification. RCA output connections can also pass signal to a second amplifier in an expanded system.\u003c\/p\u003e\u003cp\u003eCrunch equips this model with SPEED-FET MOSFET output devices, a pulse-width-modulated power supply, and a QTD aluminum heat sink. Nickel-plated brass terminals and screw-down connections support secure wiring connections. LED protection diagnostics provide visible indication of overload and speaker-short protection events.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Configuration:\u003c\/strong\u003e Powers a stereo speaker pair or supports a bridged subwoofer setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Operating Modes:\u003c\/strong\u003e Supports stereo, bridged mono, or simultaneous stereo\/bridged mono operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossover:\u003c\/strong\u003e Helps direct appropriate frequencies to speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Connects to RCA-equipped or factory-radio audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable Bass Boost:\u003c\/strong\u003e Offers 0, +6, and +12 dB bass adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection LED Diagnostics:\u003c\/strong\u003e Indicates overload and speaker-short protection conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GP-1000.2 uses a black and red chassis with a QTD aluminum heat sink for thermal management. Its Class A\/B circuit design includes SPEED-FET MOSFET output technology and a pulse-width-modulated power supply. Nickel-plated brass terminals and screw-down connectors are used for the power and speaker connections.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a location with adequate ventilation and do not install it upside down. The installation guide specifies 4 AWG power and ground cable connections, 12 AWG speaker-terminal wiring, and a 20A fuse; the battery-side power cable must be fused within 18 inches of the battery. Set the input level from minimum and use the crossover mode and frequency controls to match the connected speakers or subwoofer.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45623615160390,"sku":"GP-1000-2","price":103.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/6180Shlj6qL.jpg?v=1784372884"},{"product_id":"crunch-gp-1500-2-ground-pounder-2-channel-amplifier","title":"Crunch GP-1500.2 Ground Pounder 2-Channel Amplifier","description":"\u003cp\u003eThe Crunch GP-1500.2 Ground Pounder is a two-channel Class A\/B car audio amplifier for adding dedicated power to a vehicle sound system. It can run a pair of speakers in stereo or power a compatible subwoofer through its bridged output. This flexibility makes it suitable for systems that need more output than a head unit's built-in amplifier can provide.\u003c\/p\u003e\u003cp\u003eFor stereo applications, the GP-1500.2 is rated for 325 watts per channel at 4 ohms or 750 watts per channel at 2 ohms. When configured in bridged mono, it is rated for 1,500 watts at 4 ohms. Match the amplifier's operating mode and impedance requirements carefully to the speakers or subwoofer being used.\u003c\/p\u003e\u003cp\u003eThe amplifier includes a variable electronic crossover with a 12 dB-per-octave slope to help direct the appropriate frequency range to connected speakers. Its built-in bass control and switchable bass boost provide additional low-frequency adjustment. A 0.2-9V variable input range supports setup with a variety of source-unit signal levels.\u003c\/p\u003e\u003cp\u003eInstallation options include low-level RCA inputs for aftermarket receivers and speaker-level inputs for factory or aftermarket radios without RCA preouts. The amplifier can operate in stereo, bridged mono, or stereo\/bridged mono configurations as specified by Crunch. RCA outputs can also pass signal to another amplifier in a larger system.\u003c\/p\u003e\u003cp\u003eCrunch builds the GP-1500.2 with SPEED-FET MOSFET output devices, a high-energy pulse-width-modulated power supply, and a QTD aluminum heat sink. Nickel-plated brass terminals and screw-down connections support secure wiring. LED diagnostics provide visual indication of power and protection status during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class A\/B Design:\u003c\/strong\u003e Provides dedicated amplification for stereo speakers or a bridged subwoofer setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Capability:\u003c\/strong\u003e Delivers up to 750 watts per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Bridged Output:\u003c\/strong\u003e Provides a 1,500-watt mono configuration for a compatible subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossover:\u003c\/strong\u003e Helps tailor frequency output for speakers or subwoofer duty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Works with RCA-equipped receivers and radios with speaker outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Protection Diagnostics:\u003c\/strong\u003e Gives a visual indication of amplifier power and protection status.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GP-1500.2 has a black-and-red chassis with a QTD Technology aluminum heat sink for thermal management. Its Class A\/B topology uses Crunch SPEED-FET MOSFET output devices and a pulse-width-modulated power supply. Nickel-plated brass connection terminals and screw-down connectors are designed for secure, serviceable wiring.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure surface with adequate ventilation and do not install it upside down. Use 4 AWG power and ground wiring, a 25A fuse, and a properly prepared chassis ground close to the amplifier; the power cable should be fused within 18 inches of the battery. Use RCA inputs when available, or the high-level input harness with a source unit that lacks RCA outputs, then select stereo or bridged wiring only for a load compatible with the chosen configuration.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45623909974086,"sku":"GP-1500-2","price":116.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61VUE-a3-xL.jpg?v=1784373039"},{"product_id":"crunch-gp-2000-2-2-channel-car-amplifier","title":"Crunch GP-2000.2 2-Channel Car Amplifier","description":"\u003cp\u003eThe Crunch GP-2000.2 is a two-channel Class A\/B car audio amplifier for adding external power to a vehicle sound system. It is designed to run a pair of speakers in stereo or a compatible subwoofer setup in bridged mono. Its selectable crossover and level controls help tailor the amplifier to the speakers being used.\u003c\/p\u003e\u003cp\u003eThis amplifier suits listeners upgrading beyond head-unit power and installers building a straightforward speaker or subwoofer system. It accepts both low-level RCA and high-level speaker inputs, making it usable with many aftermarket or factory source units. A 2-ohm stereo minimum impedance and 4-ohm bridged minimum impedance provide practical wiring options.\u003c\/p\u003e\u003cp\u003eThe GP-2000.2 is rated for up to 1,000 watts per channel at 2 ohms, 500 watts per channel at 4 ohms, or 2,000 watts peak in 4-ohm bridged mono. These are manufacturer peak-power ratings rather than RMS ratings. Its Class A\/B design and low-noise preamplifier circuit are intended for full-range or subwoofer amplification applications.\u003c\/p\u003e\u003cp\u003eIts built-in Versa-Cross electronic crossover offers full-range, high-pass, and low-pass operating modes with a 12 dB-per-octave slope. Variable high-pass and low-pass controls span 40 to 400 Hz, helping separate bass from midrange and high-frequency duties. A selectable 0, 6, or 12 dB bass boost provides an additional low-frequency adjustment.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a high-energy PWM power supply, SPEED-FET MOSFET components, and an aluminum heat sink with Quick Thermal Dispersion technology. Power and protection indicators provide basic operating-status feedback, while overload and speaker-short protection help identify fault conditions. It is a compact option for an amplified two-speaker system or a bridged subwoofer installation with appropriate impedance matching.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class A\/B Design:\u003c\/strong\u003e Powers stereo speakers or a bridged mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Stability:\u003c\/strong\u003e Supports compatible 2-ohm loads on each channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Bridged Operation:\u003c\/strong\u003e Combines both channels for a mono subwoofer setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Versa-Cross Crossover:\u003c\/strong\u003e Select high-pass, low-pass, or full-range operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Works with speaker-level or RCA source signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Bass Boost:\u003c\/strong\u003e Offers 0, 6, and 12 dB settings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GP-2000.2 uses an aluminum heat sink, nickel-plated brass connection terminals, and screw-down connectors. Its internal design includes a PWM power supply, SPEED-FET MOSFET components, and thermal-dispersion engineering. LED power and protection indicators are located on the amplifier for system-status monitoring.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a dry, ventilated location and do not mount it upside down. Use 4 AWG power and ground cable, connect the ground to clean bare vehicle metal near the amplifier, and fuse the positive battery cable within 18 inches of the battery. Use RCA inputs when available, or connect the high-level input harness to factory speaker outputs; match speaker impedance to the selected stereo or bridged wiring configuration.\u003c\/p\u003e","brand":"Crunch","offers":[{"title":"Default Title","offer_id":45624089641030,"sku":"GP-2000-2","price":119.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71w5h0MLOnL.jpg?v=1784373133"},{"product_id":"gravity-gbr600-2d-2-channel-digital-amplifier","title":"Gravity GBR600-2D 2-Channel Digital Amplifier","description":"\u003cp\u003eThe Gravity GBR600-2D is a compact two-channel digital amplifier for adding dedicated power to a mobile audio system where installation room is limited. It is suited to front or rear speaker upgrades in cars, motorcycles, RVs, ATVs, boats, and similar applications. Its small chassis helps make amplifier placement more practical in tight spaces.\u003c\/p\u003e\u003cp\u003eThis full-range amplifier can be used in conventional stereo operation for a pair of speakers or bridged for a single compatible 4-ohm load. It is rated for 150 watts RMS per channel at 2 ohms, or 300 watts RMS when bridged at 4 ohms. That flexibility supports a focused speaker upgrade without requiring a large multi-channel amplifier.\u003c\/p\u003e\u003cp\u003eThe GBR600-2D uses digital amplification and is designed for efficient operation in compact mobile installations. Its RCA stereo input allows connection to an aftermarket source with RCA preamp outputs. The amplifier's compact format is intended to help simplify placement while retaining dedicated external amplification.\u003c\/p\u003e\u003cp\u003eSelectable low-pass, full-range, and high-pass crossover modes provide basic system-tuning flexibility. High-pass mode can be useful when powering mids or full-range speakers, while low-pass mode can support an appropriate bass-focused setup. Full-range mode leaves frequency selection to the connected source or system design.\u003c\/p\u003e\u003cp\u003eFor an upgrade path, the GBR600-2D is a practical choice for powering a stereo pair first, with the option to bridge the channels later if system requirements change. Match connected speakers and wiring to the amplifier's stated impedance ratings before installation. Proper power, ground, speaker, and signal connections are required for dependable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Design:\u003c\/strong\u003e Powers a stereo pair of front or rear speakers from one compact amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Output:\u003c\/strong\u003e Combines both channels for a compatible 4-ohm mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W x 2 RMS:\u003c\/strong\u003e Delivers its stated stereo rating into 2-ohm loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Stereo Input:\u003c\/strong\u003e Connects to compatible aftermarket source-unit preamp outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Crossover Modes:\u003c\/strong\u003e LPF, Full, and HPF modes support basic system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro-Compact Chassis:\u003c\/strong\u003e Fits applications with limited available mounting space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GBR600-2D has a compact digital-amplifier chassis measuring 1.5 x 4 x 6.75 inches. Its small footprint is intended for installations where a conventional full-size amplifier may be difficult to mount. The design is specified for use across vehicle, powersports, RV, and boat audio applications.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a location with appropriate clearance and route power, ground, speaker, and RCA signal wiring safely. Use stereo mode with two compatible 2-ohm or 4-ohm speaker loads, or use bridged mode only with a compatible 4-ohm load. Select HPF, LPF, or Full crossover mode according to the speakers and system role being powered.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626792312902,"sku":"GBR600-2D","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71KVvtdqxSL.jpg?v=1784375015"},{"product_id":"hertz-dp2-200-2-channel-class-ab-car-amplifier","title":"Hertz DP2-200 2-Channel Class AB Car Amplifier","description":"\u003cp\u003eThe Hertz DP2-200 is a compact two-channel Class AB car amplifier designed to add dedicated power to front speakers, rear speakers, or a single bridged subwoofer channel. It is intended for vehicle audio upgrades where a factory or aftermarket radio needs more output than its built-in amplifier can provide. Its two-channel layout supports stereo operation or bridged mono operation with compatible speaker loads.\u003c\/p\u003e\u003cp\u003eRated at 80 watts RMS per channel at 4 ohms and 110 watts RMS per channel at 2 ohms, the DP2-200 is suited to many component and coaxial speaker systems. It can also be bridged to deliver 220 watts RMS to one 4-ohm load. Variable high-pass and low-pass filters allow the amplifier to be configured for full-range speakers or a subwoofer application.\u003c\/p\u003e\u003cp\u003eThe amplifier uses Class AB circuitry and balanced preamp and speaker-level input stages for high noise rejection. Its -3 dB bandwidth is rated from 10 Hz to 45 kHz, while the amplifier also carries Hi-Res Audio certification with a stated 10 Hz to 50 kHz response capability. A 100 dBA A-weighted signal-to-noise ratio and 0.01% THD specification at 100 Hz and 70% rated power support clean signal reproduction.\u003c\/p\u003e\u003cp\u003eFor integration with modern factory systems, the DP2-200 accepts both RCA preamp input and speaker-level input signals. The speaker-level input sensitivity range extends from 1.6 to 40 Vrms, and built-in USS technology is designed to work with source units that monitor speaker-load presence. Automatic remote turn-on\/off is available from compatible BTL speaker-level outputs.\u003c\/p\u003e\u003cp\u003eThe DP2-200 fits neatly into a focused two-channel upgrade or can serve as a compact mono amplifier for a 4-ohm subwoofer. A full-range preamp output can pass signal to an additional amplifier as a system grows. Its compact chassis is intended for installations with limited available mounting space, including factory amplifier locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class AB Design:\u003c\/strong\u003e Powers a stereo speaker pair or one bridged 4-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e80W x 2 RMS at 4 Ohms:\u003c\/strong\u003e Adds dedicated power for compatible aftermarket speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Mono Output:\u003c\/strong\u003e Delivers 220W RMS into one 4-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHi-Res Audio Certification:\u003c\/strong\u003e Supports extended high-frequency playback capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-In and Speaker-In Inputs:\u003c\/strong\u003e Works with aftermarket and many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSS Integration Technology:\u003c\/strong\u003e Helps accommodate radios with speaker-load detection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DP2-200 uses a compact chassis with a removable top panel that protects its controls and connections. It includes a status LED and solid machined terminal block construction. The amplifier measures 240 mm by 190 mm by 50 mm at its main overall dimensions and weighs 1.95 kg.\u003c\/p\u003e\u003cp\u003eInstall the amplifier in a dry, ventilated vehicle location and maintain clearance around the chassis for airflow. Use it in stereo with 2-ohm or higher speakers per channel, or bridge it only to a 4-ohm load. RCA preamp inputs suit aftermarket receivers, while the supplied speaker-level harness supports integration with compatible factory-radio outputs.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631728582726,"sku":"DP2-200","price":228.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71gE6tRnvaL.jpg?v=1784380287"},{"product_id":"hertz-hcp2-compact-2-channel-ab-class-amplifier","title":"Hertz HCP2 Compact 2-Channel AB-Class Amplifier","description":"\u003cp\u003eThe Hertz HCP2 is a compact two-channel car audio amplifier designed to add dedicated power to an aftermarket or factory-based audio system. It supports stereo operation for a pair of speakers or bridged mono operation for a single compatible load. Pre-In and Speaker-In connections provide options for integrating it with a wide range of source units.\u003c\/p\u003e\u003cp\u003eFor stereo systems, the HCP2 delivers 55 watts RMS per channel into 4 ohms or 85 watts RMS per channel into 2 ohms at 1% THD. Its AB-Class amplifier stage is intended for drivers who want more controlled, externally amplified sound from front speakers, rear speakers, or component systems. The amplifier is stable down to 2 ohms per channel in stereo operation.\u003c\/p\u003e\u003cp\u003eThe HCP2 can also be configured in mono mode for a 4-ohm bridged load. In that configuration, it produces 170 watts RMS at 14.4 volts and 1% THD. This makes it suitable for a modest subwoofer channel when the connected load meets the amplifier's minimum bridged impedance requirement.\u003c\/p\u003e\u003cp\u003eHertz equips the HCP2 with balanced input circuitry to help reject electromagnetic interference at its preamplified and speaker-level inputs. Its selectable crossover section includes full-range operation, an 80 Hz high-pass filter, and a 50 to 500 Hz low-pass filter. A selectable 50 Hz bass boost offers 0, 6, or 12 dB of low-frequency adjustment.\u003c\/p\u003e\u003cp\u003eThe compact chassis measures 8.46 by 7.48 by 1.97 inches, allowing the amplifier to fit in many space-conscious vehicle installations. ART automatic remote turn-on and turn-off can operate with the Speaker-In connection, reducing the need for a separate remote signal from certain factory radios. A full-range pre-out is also provided for system expansion.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel or Bridged Operation:\u003c\/strong\u003e Run a stereo speaker pair or bridge the channels for a compatible 4-ohm mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-In and Speaker-In:\u003c\/strong\u003e Connect to aftermarket RCA outputs or speaker-level outputs from many factory radios.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eART Auto Turn-On:\u003c\/strong\u003e Automatically turns the amplifier on and off with a speaker-level input signal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossover Section:\u003c\/strong\u003e Select full-range, 80 Hz high-pass, or 50 to 500 Hz low-pass operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Bass Boost:\u003c\/strong\u003e Adjust 50 Hz boost to 0, 6, or 12 dB for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Input Circuitry:\u003c\/strong\u003e Helps reduce electromagnetic interference entering through the audio inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HCP2 uses an extruded aluminum heat sink designed to transfer heat away from its internal electronics and dissipate it through the amplifier's sides. Its compact 1.97-inch-high enclosure weighs 3.96 pounds and is sized for installations where amplifier space is limited. The amplifier includes a 20-amp onboard fuse requirement and operates from an 11 to 15 VDC vehicle electrical system.\u003c\/p\u003e\u003cp\u003eInstall the HCP2 securely with clearance around the chassis for heat dissipation, then connect the source through either Pre-In or Speaker-In. Use stereo speaker wiring with loads no lower than 2 ohms per channel, or use a single 4-ohm load when bridging the amplifier. Set the crossover, gain sensitivity, mono switch, and bass boost according to the speakers or subwoofer being powered.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631731695686,"sku":"HCP2","price":298.36,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61E90G6f43L.jpg?v=1784380754"},{"product_id":"hifonics-a1000-2d-2-channel-full-range-car-amplifier","title":"Hifonics A1000.2D 2-Channel Full-Range Car Amplifier","description":"\u003cp\u003eThe Hifonics A1000.2D is a compact two-channel car audio amplifier designed to add external power and tuning control to an upgraded vehicle sound system. Its full-range Super D-Class design allows it to power compatible speakers in stereo or operate as a bridged mono amplifier for a compatible subwoofer application. It is suited to systems that need more output capability than a head unit's built-in amplifier can provide.\u003c\/p\u003e\u003cp\u003eRated output is 250 watts per channel at 4 ohms or 500 watts per channel at 2 ohms, with a 1,000-watt bridged rating at 4 ohms. This gives installers flexibility when matching the amplifier to a pair of speakers or a single 4-ohm mono load. Proper speaker impedance and power handling should be confirmed before wiring the amplifier.\u003c\/p\u003e\u003cp\u003eFor sound shaping, the A1000.2D includes selectable low-pass, full-range, and high-pass crossover modes. Both the high-pass and low-pass crossover controls adjust from 50 Hz to 250 Hz at 12 dB per octave. A variable Bass EQ provides 0 to 12 dB of boost centered at 45 Hz for systems that need low-frequency adjustment.\u003c\/p\u003e\u003cp\u003eThe amplifier supports both RCA-level and speaker-level signal integration, making it practical for many aftermarket and factory-radio upgrade paths. Its variable input sensitivity range of 0.2 to 10 volts helps accommodate different source-unit output levels. Signal-sense turn-on capability can simplify installation when using a compatible high-level source signal.\u003c\/p\u003e\u003cp\u003eHifonics equips the A1000.2D with Ultra-Fi MOSFET output devices, a pulse-width-modulated power supply, and a heavy-duty aluminum alloy heat sink. The design also uses surface-mount technology and illuminated protection diagnostics for overload and speaker-short conditions. Its compact chassis is intended for installations where available amplifier mounting space is limited.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel or Bridged Operation:\u003c\/strong\u003e Run a stereo speaker pair or bridge the amplifier for one compatible 4-ohm mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull-Range Super D-Class Design:\u003c\/strong\u003e Provides a compact, efficient platform for full-range speaker or subwoofer system use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Accu-Cross Filters:\u003c\/strong\u003e Select LPF, full-range, or HPF operation and tailor the crossover from 50 to 250 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass EQ:\u003c\/strong\u003e Adds adjustable bass emphasis from 0 to 12 dB at 45 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Signal Inputs:\u003c\/strong\u003e Connect to compatible speaker-level outputs without requiring a separate line-output converter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-Sense Turn-On:\u003c\/strong\u003e Can power on from a compatible high-level input signal, reducing the need for a remote lead.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe A1000.2D uses a black compact chassis with a heavy-duty aluminum alloy heat sink to move heat away from its MOSFET output section. Nickel-plated RCA connectors and nickel-plated, high-temperature-resistant hex-screw terminals support secure signal and power connections. Angled connection points help improve access during installation.\u003c\/p\u003e\u003cp\u003eUse 4 AWG cable at the power and ground terminals, 18 AWG speaker wire at the speaker terminals, and an appropriately selected external fuse. Select stereo or bridged wiring only after verifying the connected speakers' impedance and power requirements. The amplifier may be turned on through switched remote turn-on or compatible signal-sense operation, and its crossover mode should be set for the role it serves in the system.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631896813638,"sku":"A1000-2D","price":218.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61TiRw8BRRL.jpg?v=1784385688"},{"product_id":"hifonics-tps-a500-2-thor-2-channel-powersports-amplifier","title":"Hifonics TPS-A500.2 THOR 2-Channel Powersports Amplifier","description":"\u003cp\u003eThe Hifonics TPS-A500.2 is a compact two-channel powersports amplifier designed to add dedicated amplification where space is limited. It is suited to ATV, UTV, side-by-side, golf cart, and marine-style audio installations using a 12-volt electrical system. Its full-range design lets it support a pair of speakers while keeping the amplifier footprint small.\u003c\/p\u003e\u003cp\u003eWith 250 watts RMS per channel at 2 ohms, the TPS-A500.2 provides useful output for appropriately matched full-range speakers. It also delivers 125 watts RMS per channel at 4 ohms, giving installers options when selecting speakers and configuring a system. A 2-ohm-stable design supports compact, high-output powersports speaker systems when wired correctly.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a full-range Class-D topology for efficient operation in a compact chassis. Its adjustable input level accepts source signals from 0.2 to 9 volts, helping it integrate with many RCA-equipped source units and preamplifiers. A low-noise preamplifier stage is intended to reduce incoming source noise before amplification.\u003c\/p\u003e\u003cp\u003eSelectable high-pass, full-range, and low-pass crossover modes help tailor the amplifier to the speakers being used. The high-pass filter adjusts from 15 to 300 Hz, while the low-pass filter adjusts from 50 to 300 Hz. This makes the TPS-A500.2 suitable for full-range speakers, high-passed tower speakers, or other system-specific applications within its rated operating limits.\u003c\/p\u003e\u003cp\u003eMarine-grade protection helps the amplifier suit installations exposed to moisture and outdoor conditions. The design uses a conformal-coated circuit board and is specified to meet ABYC and ASTM standards, while the aluminum heat sink aids heat dissipation. A detachable Molex-style wiring harness also simplifies installation and removal in tight powersports mounting locations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class-D Design:\u003c\/strong\u003e Efficient full-range amplification in a compact format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stability:\u003c\/strong\u003e Supports 250 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Protection:\u003c\/strong\u003e Conformal-coated circuit board resists moisture and corrosion exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Select high-pass, full-range, or low-pass signal routing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Noise Preamplifier:\u003c\/strong\u003e Helps reduce noise from the connected source unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Diagnostics:\u003c\/strong\u003e Lighted indicators monitor thermal, overload, DC, and short conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe TPS-A500.2 uses an aluminum heat sink and compact black chassis for installations where mounting space is restricted. Its marine-oriented construction includes a conformal-coated PCB for added resistance to salt spray and moisture exposure. The amplifier uses RCA signal input and detachable Molex-style power and speaker connections.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure surface with adequate ventilation; do not mount it upside down. Use 10-gauge power and ground cable, protect the positive power lead with a 30-amp fuse within 18 inches of the battery, and connect a compatible RCA-equipped source unit. Set the input level as a gain match rather than a volume control, then choose the crossover mode and frequency range that fit the connected speakers.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631931809862,"sku":"TPS-A500-2","price":156.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/810bG1x32VL.jpg?v=1784389994"},{"product_id":"hifonics-zg-1200-2-2-channel-class-a-b-car-amplifier","title":"Hifonics ZG-1200.2 2-Channel Class A\/B Car Amplifier","description":"\u003cp\u003eThe Hifonics ZG-1200.2 is a two-channel car audio amplifier designed to add substantial external power to a speaker system or a compatible subwoofer setup. It is a Class A\/B model with stereo and bridged-mono operating options, making it suitable for a range of upgrade paths. Use it when a factory or aftermarket receiver needs more output capability than its built-in amplifier can provide.\u003c\/p\u003e\u003cp\u003eIn stereo operation, the ZG-1200.2 is rated for 300 watts RMS per channel at 4 ohms or 600 watts RMS per channel at 2 ohms. It can also be bridged to deliver 1,200 watts RMS into a 4-ohm mono load. These configurations allow it to support two speakers, two subwoofers within its impedance limits, or one appropriately matched bridged subwoofer.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a PWM MOSFET power supply with Hifonics Simpatico Coil Design to support stable power delivery. Its Class A\/B architecture is paired with a low-noise preamplifier circuit and a stated 10 Hz to 22 kHz frequency response. Variable crossover controls and bass adjustment help tailor the amplifier for full-range speakers or a subwoofer-focused installation.\u003c\/p\u003e\u003cp\u003eIntegration is practical for both aftermarket and factory audio systems. The ZG-1200.2 provides RCA inputs along with speaker-level inputs, so it can accept either low-level preamp signal or a factory speaker-level signal. RCA outputs are also provided for passing signal to an additional amplifier in a larger system.\u003c\/p\u003e\u003cp\u003eBuilt for conventional vehicle installations, the amplifier uses an aluminum heat sink and angled connection terminals for accessible wiring. LED power and protection diagnostics help identify operating or fault conditions, including overload and speaker-short protection. A 4 AWG power\/ground terminal capacity and 12 AWG speaker terminal capacity support a properly planned installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class A\/B Design:\u003c\/strong\u003e Powers a stereo speaker pair or supports bridged mono operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W RMS Bridged Output:\u003c\/strong\u003e Delivers rated mono power into a 4-ohm bridged load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Electronic Crossovers:\u003c\/strong\u003e Helps match the amplifier to speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And Speaker-Level Inputs:\u003c\/strong\u003e Supports aftermarket radios and many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWM MOSFET Power Supply:\u003c\/strong\u003e Supports stable amplifier power delivery during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Protection Diagnostics:\u003c\/strong\u003e Indicates power and protection status at the amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ZG-1200.2 uses an aluminum heat sink to dissipate operating heat and a Class A\/B amplifier platform with a PWM MOSFET power supply. Its nickel-plated RCA inputs, molded connection terminals, and angled terminal layout are intended to support secure, accessible connections. The chassis measures 10.875 inches long, 8.25 inches wide, and 2.375 inches high.\u003c\/p\u003e\u003cp\u003eMount the amplifier on a secure, dry surface with adequate airflow and route power, signal, and speaker wiring carefully through the vehicle. Use 4 AWG-capable power and ground wiring, a properly sized fuse near the battery, and speakers wired within the amplifier's rated impedance limits. For bridged use, connect one 4-ohm load as specified and configure the crossover and input level conservatively before final tuning.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631950979142,"sku":"ZG-1200-2","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/513aYdJzG_L.jpg?v=1784390493"},{"product_id":"infinity-3002a-2-channel-powersports-amplifier","title":"Infinity 3002A 2-Channel Powersports Amplifier","description":"\u003cp\u003eThe Infinity Kappa Perfect 3002A is a compact two-channel Class D powersports amplifier designed to add clean external power where installation space is limited. It is suited to motorcycle, marine, and other powersports audio systems that need more output than a source unit can provide. Its two-channel layout can power a pair of speakers or be bridged for a single compatible subwoofer application.\u003c\/p\u003e\u003cp\u003eWith 100 watts RMS per channel at 4 ohms and 150 watts RMS per channel at 2 ohms, the 3002A is built for properly matched full-range speakers. When configured in bridged mode, it delivers 300 watts RMS at 4 ohms. The selectable crossover and bass-boost controls help tailor the amplifier to speaker-focused or subwoofer-focused system layouts.\u003c\/p\u003e\u003cp\u003eThe amplifier uses efficient Class D operation in an ultra-compact aluminum chassis measuring only 8.157 inches wide, 1.75 inches high, and 3.35 inches deep. Its outdoor-oriented construction includes a weather-resistant chassis and conformal-coated circuit board. This makes it a practical choice for installations exposed to the vibration and environmental demands common in powersports vehicles.\u003c\/p\u003e\u003cp\u003eIntegration is flexible because the 3002A accepts both RCA line-level and speaker-level input signals. The input selector accommodates low-level aftermarket source outputs or high-level factory-style speaker outputs. When speaker-level inputs are used, its DC-offset signal sensing can turn the amplifier on without a separate remote-turn-on connection.\u003c\/p\u003e\u003cp\u003eSystem tuning is straightforward with selectable full-range, high-pass, and low-pass crossover modes. The crossover frequency can be set to 60, 80, or 120 Hz with a 12 dB-per-octave slope, while the low-pass mode also enables selectable 0, +6, or +12 dB bass boost at 45 Hz. Use it as a compact speaker amplifier in a two-channel system, or bridge it into a 4-ohm subwoofer setup when appropriate.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Supplies efficient power for speakers or a bridged subwoofer configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100W x 2 RMS at 4 Ohms:\u003c\/strong\u003e Provides substantial power for matched full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Bridged Output:\u003c\/strong\u003e Supports one compatible 4-ohm subwoofer or mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Electronic Crossover:\u003c\/strong\u003e Chooses full-range, high-pass, or low-pass operation for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Works with RCA preamp outputs or speaker-wire signal inputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC-Offset Signal Sensing:\u003c\/strong\u003e Enables automatic turn-on when using speaker-level inputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 3002A combines an aluminum chassis with a compact footprint for installations where conventional amplifiers may not fit. Its weather-resistant construction and conformal-coated circuit board are intended for demanding powersports environments. Power and protection indicators provide visible operating-status feedback, while the amplifier includes a 25A fuse.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a secure location with adequate airflow and do not install it with the heat sink facing downward. Infinity recommends 10 AWG wire, and the main fuse and fuse holder should be located within 18 inches of the vehicle battery for direct-hardwire installations. Optional mating connectors can be used, or the supplied harness connections can be direct-wired; select HI or LO input level to match the source signal and set gain carefully before final tuning.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632082837574,"sku":"INFWSKP3002AM","price":230.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61MmdX8EMFL.jpg?v=1784393735"},{"product_id":"jbl-jblstagegt80021am-2-channel-class-d-car-amplifier","title":"JBL JBLSTAGEGT80021AM 2-Channel Class-D Car Amplifier","description":"\u003cp\u003eThe JBL JBLSTAGEGT80021AM is a compact two-channel Class-D car amplifier designed to add clean, controlled power to an upgraded vehicle audio system. It delivers 80 watts RMS per channel at 4 ohms or 130 watts RMS per channel at 2 ohms, making it suitable for powering a pair of speakers. It can also be bridged to provide 260 watts RMS to one 4-ohm full-range speaker load.\u003c\/p\u003e\u003cp\u003eThis amplifier is a practical choice for listeners who want more output and control than a factory head unit can provide. Its wide input-sensitivity range supports both low-level and high-level signal sources, helping it work with many aftermarket and factory-radio installations. A high-level input cable is included for systems that use speaker-level connections.\u003c\/p\u003e\u003cp\u003eThe STAGE GT 80021 provides full-range amplification from 20 Hz to 20 kHz, so it can be used with component speakers, coaxial speakers, or other appropriate full-range drivers. Variable high-pass and low-pass filters let the installer direct the frequency range sent to the connected speakers. This helps match the amplifier to the speakers and the role they serve in the system.\u003c\/p\u003e\u003cp\u003eFor tonal adjustment, the amplifier includes variable bass EQ centered at 45 Hz with a 0 to 12 dB adjustment range. The onboard controls allow sound tuning without requiring an external processor for basic crossover and bass-level setup. Its Class-D platform is designed for efficient operation in a compact chassis.\u003c\/p\u003e\u003cp\u003eThe JBLSTAGEGT80021AM is well suited to a front-stage or rear-speaker upgrade, or to a bridged single-speaker application within its rated load requirements. It operates from 9 to 16 volts and is compatible with start\/stop vehicle systems. Built-in protection circuits monitor electrical and thermal operating conditions for added system protection.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class-D Design:\u003c\/strong\u003e Powers a pair of speakers with compact, efficient amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged 4-Ohm Output:\u003c\/strong\u003e Delivers 260 watts RMS to one compatible full-range load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filtering helps tailor speaker frequency range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bass EQ:\u003c\/strong\u003e Provides 0 to 12 dB of boost at 45 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Supports factory-radio speaker outputs and RCA-level sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Circuitry:\u003c\/strong\u003e Helps guard against DC, voltage, current, and thermal faults.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier uses a compact JBL Stage GT chassis measuring 6-3\/16 inches wide, 1-15\/16 inches high, and 5-7\/32 inches deep. Its compact footprint can simplify placement where available mounting space is limited. The unit weighs 2.34 pounds and includes mounting screws with washers.\u003c\/p\u003e\u003cp\u003eInstall the amplifier using properly sized power, ground, speaker, and signal wiring selected for the vehicle and system design. Use the included high-level input cable when connecting to a speaker-level source, or use the line-level inputs with a compatible RCA source. Set the input level, crossover mode, crossover frequency, and bass EQ to suit the connected speakers and avoid operating below the amplifier's rated impedance configurations.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632186875974,"sku":"JBLSTAGEGT80021AM","price":162.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71EANb9tSEL.jpg?v=1784398176"},{"product_id":"memphis-mm600-v2-2-channel-marine-amplifier","title":"MEMPHIS MM600-V2 2-Channel Marine Amplifier","description":"\u003cp\u003eThe MEMPHIS MM600-V2 is a two-channel marine-grade amplifier designed to add clean, high-output power in boats and other exposed mobile-audio installations. It is suited to powering a pair of marine speakers or a single bridged subwoofer channel. Its water-resistant construction helps address the moisture and environmental exposure common in marine applications.\u003c\/p\u003e\u003cp\u003eAt 4 ohms, the amplifier delivers 200 watts RMS per channel, increasing to 300 watts RMS per channel at 2 ohms. It can also be bridged to provide 600 watts RMS into a 4-ohm mono load. This flexibility supports either a stereo speaker upgrade or a dedicated subwoofer application.\u003c\/p\u003e\u003cp\u003eThe MM600-V2 uses adjustable high-pass and low-pass crossover controls to help match amplifier output to the speakers or subwoofer being used. A selectable 12 dB-per-octave Butterworth crossover network provides practical frequency management. Variable bass boost and an infrasonic filter add further low-frequency setup control.\u003c\/p\u003e\u003cp\u003eMarine-focused details include an IPX5 rating, sealed top-mounted controls, removable sealed signal connectors, and a removable power terminal. The extruded aluminum heat sink, sealed chassis construction, and conformal-coated circuit boards are intended to support operation in demanding environments. Protection circuitry monitors overload, short-circuit, thermal, and reverse-polarity conditions.\u003c\/p\u003e\u003cp\u003eThis amplifier accepts both low-level and high-level input signals, allowing integration with many marine source units and audio systems. Signal-sensing auto turn-on can simplify installation where a conventional remote-turn-on lead is not available. A Memphis RG6 remote bass control is included for accessible level adjustment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Output:\u003c\/strong\u003e Provides 200 watts RMS per channel at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridged Capability:\u003c\/strong\u003e Delivers 600 watts RMS into a 4-ohm mono load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Rating:\u003c\/strong\u003e Supports use in water-exposed marine audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Connections:\u003c\/strong\u003e Removable power and signal connectors help protect connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters help match connected speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Includes an RG6 remote for convenient level adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MM600-V2 combines an extruded aluminum heat sink with marine-oriented sealing features, including a sealed top control panel and removable sealed signal connectors. Its chassis and coated circuit-board design are intended to improve resistance to environmental exposure. An LED light strip provides a visual accent while retaining the amplifier's compact, low-profile format.\u003c\/p\u003e\u003cp\u003eUse the amplifier with a minimum 2-ohm stereo load or a minimum 4-ohm bridged load. Memphis specifies a 4GKIT amplifier wiring kit recommendation, and the unit accepts low-level or high-level signal input. Mount it securely in a location with appropriate ventilation, keep the top control panel properly sealed in moisture-prone areas, and set crossover and gain controls to suit the connected speakers or subwoofer.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633186267206,"sku":"MM600-V2","price":399.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71YInc0HNCL.jpg?v=1784411082"},{"product_id":"memphis-mx150-2-24v-2-channel-24v-powersports-amplifier","title":"Memphis MX150.2-24V 2-Channel 24V Powersports Amplifier","description":"\u003cp\u003eThe Memphis MX150.2-24V is a compact two-channel powersports amplifier designed for vehicles that use an 8V to 24V DC electrical system. It is a practical option for golf carts and other equipment operating on 24V power where a conventional 12V amplifier may not be suitable. Its small footprint helps add amplified sound where mounting space is limited.\u003c\/p\u003e\u003cp\u003eRated at 75 watts RMS per channel at 2 ohms, this amplifier is intended to drive a pair of compatible speakers in a compact audio system. Its published 60Hz to 20kHz frequency response supports clear playback across the main listening range for speaker-based upgrades. The two-channel layout suits simple front-speaker, pod-speaker, or compact powersports installations.\u003c\/p\u003e\u003cp\u003eThe MX150.2-24V uses a sealed harness and sealed gain controls to support use in exposed powersports environments. It carries an IP66 rating and uses a textured black heatsink with injection-molded end plates. Memphis notes that the amplifier is water resistant, but it should not be mounted where it can be submerged.\u003c\/p\u003e\u003cp\u003eLow-level source input is supported, and the wiring diagram also shows use with a high-to-low converter when connecting to an appropriate source. The input range is specified at 450mV to 4.5V, allowing gain adjustment for compatible signal sources. A 20A fuse is shown in the supplied wiring diagram for circuit protection.\u003c\/p\u003e\u003cp\u003eThis amplifier fits a straightforward two-speaker upgrade path for a golf cart, side-by-side, motorcycle, marine application, or another compact vehicle using a compatible electrical system. It is not specified for bridged operation or 1-ohm loads. Memphis lists its 10GKIT amplifier kit as the recommended connection kit.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e8V-24V DC Operation:\u003c\/strong\u003e Supports a broad vehicle-voltage range, including 24V golf-cart systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Output:\u003c\/strong\u003e Provides 75 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Rating:\u003c\/strong\u003e Adds water and dust resistance for exposed powersports use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Controls And Harness:\u003c\/strong\u003e Helps protect adjustment and wiring connection areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Compact Chassis:\u003c\/strong\u003e Fits installations with limited available mounting space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20A Fusing:\u003c\/strong\u003e The wiring diagram specifies a 20A fused power connection.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MX150.2-24V combines a black textured heatsink with injection-molded end plates in a compact 4.8 x 3.2 x 1.5-inch housing. Its sealed gain pots and harness complement the IP66-rated design for applications exposed to weather, dust, and vibration. Memphis also identifies the amplifier as using a top-mounted control panel.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a location that remains dry and is not subject to submersion. Use the yellow power lead, black ground lead, and blue remote lead as shown in the wiring diagram, with a 20A fuse installed near the battery connection. Verify the speaker load before connection, use compatible 2-ohm speakers for the published power rating, and use a high-to-low converter when the source does not provide a suitable low-level signal.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633187872838,"sku":"MX150-2-24V","price":119.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61Yexd4DnJL.jpg?v=1784411875"},{"product_id":"memphis-audio-mxa300-2-ip66-2-channel-powersports-amplifier","title":"Memphis Audio MXA300.2 IP66 2-Channel Powersports Amplifier","description":"\u003cp\u003eThe Memphis Audio MXA300.2 is a compact two-channel powersports amplifier designed to add dedicated power where space and weather exposure are practical concerns. It is suited for motorcycles, ATVs, UTVs, side-by-sides, and marine-oriented audio installations. Its IP66-rated construction helps support installations exposed to dust, water spray, and changing outdoor conditions.\u003c\/p\u003e\u003cp\u003eIn stereo operation, the MXA300.2 delivers 115 watts RMS per channel at 4 ohms or 150 watts RMS per channel at 2 ohms. This makes it a practical match for a pair of appropriately rated full-range speakers, pods, or component speakers. For a single-subwoofer setup, it can be bridged to provide 300 watts RMS at 4 ohms.\u003c\/p\u003e\u003cp\u003eThe amplifier uses full-range Class D operation to provide efficient amplification in a small chassis. Its frequency response is rated from 20Hz to 20kHz, allowing it to support either full-range speaker duty or a focused bass channel when configured accordingly. Distortion is rated at less than 1% at 4 ohms.\u003c\/p\u003e\u003cp\u003eHigh-level and low-level inputs provide connection options for systems using either speaker-level outputs or RCA-style preamp outputs. A selectable crossover includes high-pass, low-pass, and full-range positions, with an adjustable frequency range from 50Hz to 200Hz. The adjustable level control helps match the amplifier to the source unit and connected speakers.\u003c\/p\u003e\u003cp\u003eThe MXA300.2 fits easily into a staged powersports audio upgrade, whether it is powering a first pair of speakers or serving as a compact bridged subwoofer amplifier. Sealed connectors, sealed tuning controls, and a conformal-coated board are intended for demanding installations. Its small footprint can help when mounting in a saddlebag, under a seat, or in a protected compartment.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Design:\u003c\/strong\u003e Powers a stereo speaker pair or a bridged mono subwoofer setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP66 Water Resistance:\u003c\/strong\u003e Supports use in weather-exposed powersports and marine applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W x 2 at 2 Ohms:\u003c\/strong\u003e Provides substantial stereo output for compatible speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Bridged Output:\u003c\/strong\u003e Delivers mono power to one 4-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Connects to RCA-equipped or speaker-level audio sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossover:\u003c\/strong\u003e Select high-pass, low-pass, or full-range operation for the system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MXA300.2 uses a sealed chassis, sealed connectors, sealed tuning controls, and a conformal-coated circuit board to support outdoor-oriented installations. Durable stainless-steel and aluminum hardware complement the compact enclosure. The amplifier measures 8.625 inches long, 3.25 inches wide, and 1.75 inches high.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a location protected from direct water contact while allowing ventilation for heat dissipation. Use either the low-level RCA input or high-level input, then select full, high-pass, or low-pass crossover operation to suit the connected speakers or subwoofer. Verify speaker impedance before wiring, use a properly fused power connection near the battery, and connect both supplied power and ground wire pairs as directed.\u003c\/p\u003e","brand":"Memphis","offers":[{"title":"Default Title","offer_id":45633188266054,"sku":"MXA300-2","price":140.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/616bkGBIX2L.jpg?v=1784412114"},{"product_id":"rockford-fosgate-m2-200x2-2-channel-marine-amplifier","title":"Rockford Fosgate M2-200X2 2-Channel Marine Amplifier","description":"\u003cp\u003eThe Rockford Fosgate M2-200X2 is a compact two-channel marine amplifier designed to add clean, dedicated power to an outdoor audio system. It is suited to boats, personal watercraft, and other open-air applications where equipment faces moisture, dust, sunlight, and vibration. Its Element Ready construction is intended to support dependable operation in these demanding environments.\u003c\/p\u003e\u003cp\u003eThis full-range Class D amplifier produces 50 watts RMS per channel at 4 ohms or 100 watts RMS per channel at 2 ohms. It can also be bridged to deliver 200 watts RMS to one 4-ohm load. That flexibility makes it useful for powering a pair of marine speakers or a compatible single speaker load in a compact system.\u003c\/p\u003e\u003cp\u003eThe M2-200X2 uses a full-range Class D design to reduce current demand compared with less-efficient amplifier designs. Its 20 Hz to 20 kHz frequency response supports music playback across the full audible range. Adjustable high-pass, low-pass, and all-pass crossover settings help tailor the amplifier to the speakers and system layout.\u003c\/p\u003e\u003cp\u003eRockford Fosgate C.L.E.A.N. input and output clip indicators assist with setting source volume and amplifier gain. The indicators identify when input or output clipping begins, helping the installer set levels more accurately. The amplifier also uses a P.O.W.E.R. supply design that increases output as supply voltage increases.\u003c\/p\u003e\u003cp\u003eFor system integration, the M2-200X2 accepts both RCA low-level and high-level speaker inputs. RCA pass-through outputs can feed an additional amplifier without requiring another long RCA run from the source unit. Auto remote turn-on capability is available when using high-level inputs, which can simplify integration with compatible factory or marine source units.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class D Power:\u003c\/strong\u003e Delivers efficient full-range amplification for marine speaker systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectable Power Modes:\u003c\/strong\u003e Runs stereo at 2 or 4 ohms, or bridged at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Uses marine-focused materials and protective circuit-board coating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Clip Indicators:\u003c\/strong\u003e Helps set gain and source levels with visual clipping feedback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e High-pass and low-pass filters adjust from 50 Hz to 250 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Pass-Through:\u003c\/strong\u003e Supports adding another amplifier without an extra source-level cable run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe M2-200X2 combines a UV-stable powder-coated cast-aluminum heatsink with a conformal-coated circuit board and zinc-nickel-plated marine-grade brass terminals. Its compact chassis measures 1.9 inches high by 6.8 inches wide by 8.1 inches deep. Convection cooling and corrosion-resistant connection hardware support installation in marine and outdoor audio environments.\u003c\/p\u003e\u003cp\u003eUse 4 AWG power and ground wiring, up to 8 AWG speaker wiring, and a separately purchased 30-amp fuse. Mount the amplifier where it remains accessible for adjustment and has at least 1 inch of air space around the heatsink for cooling; do not mount it in an engine compartment. Use either the high-level input or low-level RCA input, not both, and use a 4-ohm load when the amplifier is bridged.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45633803157574,"sku":"M2-200X2","price":299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71xfqKUKEGL.jpg?v=1784425345"},{"product_id":"rockford-fosgate-p1000x2-2-channel-car-amplifier","title":"Rockford Fosgate P1000X2 2-Channel Car Amplifier","description":"\u003cp\u003eThe Rockford Fosgate Punch P1000X2 is a full-size 2-channel car amplifier designed to add substantial power to an aftermarket audio system. It provides separate left and right channels for speakers or components, and it can be bridged into a single high-power channel for compatible subwoofer applications. This flexibility helps solve the common need for more output than a receiver or compact amplifier can provide.\u003c\/p\u003e\u003cp\u003eIt is a practical choice for listeners building a strong front-stage, component-speaker, or subwoofer-focused system. The amplifier delivers 300 watts RMS per channel at 4 ohms and 500 watts RMS per channel at 2 ohms. In bridged operation, it delivers 1,000 watts RMS at 4 ohms for a properly matched mono load.\u003c\/p\u003e\u003cp\u003eIts Class A\/B circuit topology is intended for full-range operation, with a rated frequency response of 20 Hz to 20 kHz. Variable high-pass, low-pass, and all-pass crossover selection helps tailor the amplifier to speakers, components, or subwoofers. The adjustable Punch EQ2 adds bass or treble shaping according to the selected crossover mode.\u003c\/p\u003e\u003cp\u003eThe P1000X2 includes Rockford Fosgate C.L.E.A.N. setup technology, using input and output clip indicators to assist with level setting. Its RCA input accepts either high-level speaker signal or low-level RCA signal, reducing the need for a separate line-output converter in many factory-radio installations. A passive RCA pass-through output can feed an additional amplifier.\u003c\/p\u003e\u003cp\u003eFor a larger system, the P1000X2 can power a stereo pair while its pass-through output supports signal distribution to another amplifier. It requires a correctly sized charging system, 4 AWG power wiring, a 140-amp fuse, and proper speaker-load planning. The compact full-chassis footprint allows installation on an amp rack, trunk panel, or other ventilated mounting location.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000-Watt RMS Total Power:\u003c\/strong\u003e Supplies high continuous output for demanding speaker or subwoofer systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Two-Channel Design:\u003c\/strong\u003e Combines both channels for a 4-ohm mono application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- and Low-Level Inputs:\u003c\/strong\u003e Connects to factory speaker wiring or aftermarket RCA outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup:\u003c\/strong\u003e Clip LEDs help set source and amplifier levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Butterworth Crossovers:\u003c\/strong\u003e Supports high-pass, low-pass, or all-pass system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePunch EQ2:\u003c\/strong\u003e Adds adjustable bass or treble contouring when needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P1000X2 uses a cast-aluminum heatsink with convection cooling and a stealth top-mounted control panel. Its captive C-clamp power and speaker terminals are designed for secure wiring connections, while Power, Protect, Thermal, input-clip, and output-clip indicators provide operating feedback. Short-circuit and over-current protection are included.\u003c\/p\u003e\u003cp\u003eUse 4 AWG power and ground wiring, install a 140-amp fuse near the battery, and maintain at least 1 inch of air space around the heatsink. The amplifier is rated for loads no lower than 2 ohms per channel in stereo or 4 ohms bridged. Mount it in a ventilated interior location, connect a compatible source signal, and match its RMS output and impedance capability to the connected speakers or subwoofers.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634132181062,"sku":"P1000X2","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ahirbMpAL.jpg?v=1784428176"},{"product_id":"rockford-fosgate-p300x2-2-channel-car-amplifier","title":"Rockford Fosgate P300X2 2-Channel Car Amplifier","description":"\u003cp\u003eThe Rockford Fosgate Punch P300X2 is a full-chassis, 2-channel car amplifier designed to add clean, controlled power to a pair of speakers or a compact subwoofer system. It is suited to listeners who need more output and headroom than a factory radio or low-power amplifier can provide. With stereo and bridged operating modes, it can support a focused front-stage upgrade or a single 4-ohm subwoofer application.\u003c\/p\u003e\u003cp\u003eIn stereo mode, the P300X2 supplies 100 watts RMS per channel at 4 ohms or 150 watts RMS per channel at 2 ohms. This makes it a practical match for appropriately rated coaxial or component speakers. When bridged, it delivers 300 watts RMS to one 4-ohm load for smaller subwoofer systems.\u003c\/p\u003e\u003cp\u003eThe amplifier uses a Class A\/B circuit topology for full-range amplification and covers a 20 Hz to 20 kHz frequency response. Variable high-pass and low-pass Butterworth crossovers help tailor the signal for speakers or subwoofer duty. Its onboard Punch EQ adds adjustable bass enhancement at 45 Hz, while a separate high-frequency tone control provides additional system tuning flexibility.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is supported by a single RCA input pair that accepts high-level or low-level signals, along with an auto turn-on circuit for high-level integration. A low-level RCA pass-through output can feed another amplifier in an expanded system. C.L.E.A.N. setup support and input\/output clip indicators help with gain adjustment.\u003c\/p\u003e\u003cp\u003eThe P300X2 is built for conventional 12-volt vehicle electrical systems and uses convection cooling through a cast-aluminum heatsink. Its compact 2.38 x 7.76 x 9.86 inch chassis can fit many under-seat, trunk, or cargo-area installations when adequate ventilation is provided. It is a flexible choice for a moderate-power speaker upgrade today with the option to reconfigure for a bridged subwoofer setup later.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Platform:\u003c\/strong\u003e Delivers rated stereo or bridged power for speaker or subwoofer systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stereo Capability:\u003c\/strong\u003e Provides up to 150 watts RMS per channel at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Bridged Mode:\u003c\/strong\u003e Supplies 300 watts RMS to one compatible subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh\/Low-Level Inputs:\u003c\/strong\u003e Works with many factory and aftermarket source units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Butterworth Crossovers:\u003c\/strong\u003e Helps direct appropriate frequencies to connected speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup Indicators:\u003c\/strong\u003e Supports more precise gain setting and clip monitoring.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P300X2 uses a cast-aluminum heatsink, convection cooling, captive C-clamp power and speaker terminals, and a stealth top-mounted control panel. Protection features include short-circuit and over-current protection, along with power, protect, and thermal status indication. The chassis measures 2.38 x 7.76 x 9.86 inches and has a listed shipping weight of 9.5 pounds.\u003c\/p\u003e\u003cp\u003eUse the amplifier in stereo with two 2-ohm or 4-ohm speaker loads, or bridge it only to a 4-ohm load. Rockford Fosgate specifies 4 to 8 AWG power wire, 8 to 18 AWG speaker wire, and a 50-amp external fuse, which is not included. Mount the amplifier securely in a ventilated location, use the selectable crossover mode appropriate to the speakers, and set gain with the C.L.E.A.N. and clip-indicator functions.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45634366046278,"sku":"P300X2","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71j9Yk2aq0L.jpg?v=1784431358"},{"product_id":"rockford-fosgate-p500x2-500w-2-channel-amplifier","title":"Rockford Fosgate P500X2 500W 2-Channel Amplifier","description":"\u003cp\u003eThe Rockford Fosgate Punch P500X2 is a two-channel car audio amplifier designed to add dedicated power to speakers, component systems, or a bridged subwoofer setup. It delivers 150 watts RMS per channel at 4 ohms, 250 watts RMS per channel at 2 ohms, or 500 watts RMS bridged at 4 ohms. This makes it a practical choice for systems that need more output than a factory or aftermarket receiver can provide.\u003c\/p\u003e\u003cp\u003eIts two-channel layout supports several upgrade paths. Use it in stereo for a pair of full-range speakers or component speakers, or bridge it to a compatible 4-ohm subwoofer load. The 2-ohm stereo stability gives installers flexibility when matching speaker impedance and amplifier output.\u003c\/p\u003e\u003cp\u003eThe P500X2 uses a Class A\/B circuit topology and covers a 20 Hz to 20 kHz frequency response range. Variable high-pass, low-pass, and all-pass crossover modes help direct the appropriate frequencies to the speakers or subwoofer being powered. Its adjustable Punch EQ can provide bass and treble contouring based on the selected crossover mode.\u003c\/p\u003e\u003cp\u003eHigh- and low-level input capability helps the amplifier work with either an aftermarket receiver or many factory audio systems. When a high-level signal is used, the amplifier's auto turn-on function is active. RCA pass-through outputs also make it easier to send the incoming signal to additional amplifiers in a multi-amp system.\u003c\/p\u003e\u003cp\u003eRockford Fosgate's C.L.E.A.N. setup features input and output clip indicators to assist with gain adjustment. The amplifier also includes short-circuit, over-current, and thermal protection functions. A compact full-chassis format, top-mounted controls, and an optional PLC2 remote level control support a tidy, adjustable installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Total Output:\u003c\/strong\u003e Supplies up to 250 watts RMS to each of two 2-ohm channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Two-Channel Design:\u003c\/strong\u003e Can power a compatible 4-ohm subwoofer with 500 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A\/B Topology:\u003c\/strong\u003e Provides full-range amplification for speaker or component-system applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Butterworth Crossovers:\u003c\/strong\u003e Helps tailor frequency delivery for speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Supports integration with factory or aftermarket source units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup Indicators:\u003c\/strong\u003e Input and output clip LEDs assist with gain setting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe P500X2 uses a cast-aluminum heatsink with convection cooling and a stealth top-mounted control panel. Nickel-plated captive C-clamp speaker terminals accept up to 8 AWG speaker wire, while the power and ground terminals accept 4 AWG wire. Power, protect, thermal, input-clip, and output-clip indicators provide visible system status during setup and operation.\u003c\/p\u003e\u003cp\u003ePlan for 4 AWG power and ground wiring, an 80-amp fuse near the vehicle battery, RCA cables or an appropriate speaker-wire-to-RCA input adapter, and compatible speakers or subwoofers. Mount the amplifier where airflow can circulate around the heatsink, with at least 1 inch of clearance recommended. Use the high-pass crossover for full-range speakers, the low-pass crossover for a bridged subwoofer application, and verify that the final load is no lower than 2 ohms stereo or 4 ohms bridged.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45636880597062,"sku":"P500X2","price":429.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71_YZeOHlIL.jpg?v=1784432985"},{"product_id":"rockford-fosgate-pbr300x2-2-channel-car-amplifier","title":"Rockford Fosgate PBR300X2 2-Channel Car Amplifier","description":"\u003cp\u003eThe Rockford Fosgate Punch PBR300X2 is an ultra-compact two-channel car amplifier designed for systems where installation space is limited. It provides dedicated power for a pair of speakers or components while fitting in locations that may not accommodate a conventional amplifier. Its compact format makes it suitable for vehicle audio upgrades that need added output without a large chassis.\u003c\/p\u003e\u003cp\u003eRated for 100 watts RMS per channel at 4 ohms or 150 watts RMS per channel at 2 ohms, the PBR300X2 can support a properly matched pair of full-range or component speakers. It can also be bridged to deliver 300 watts RMS to one 4-ohm load. This flexibility lets it serve as a speaker amplifier now or as a compact mono solution for a compatible small subwoofer system.\u003c\/p\u003e\u003cp\u003eThe amplifier uses Rockford Fosgate Class BR Boosted Rail Technology, a design intended to provide its rated output from a notably small enclosure. A MOSFET output stage and convection-cooled extruded aluminum heatsink support its compact, full-range design. The result is a practical amplifier for trucks, compact vehicles, motorcycles, and other installations with limited mounting room.\u003c\/p\u003e\u003cp\u003eHigh-level and low-level input capability allows the PBR300X2 to work with many aftermarket or factory audio sources. Its variable 4-6V high-level DC-offset turn-on control can simplify integration with compatible factory systems. Adjustable high-pass, low-pass, and all-pass crossover settings help tailor the amplifier to speakers, components, or a bridged subwoofer application.\u003c\/p\u003e\u003cp\u003eThe PBR300X2 is a useful foundation for a focused two-speaker upgrade or a compact system expansion. Its selectable crossover, optional remote Punch EQ capability, and bridgeable output allow it to adapt as system needs change. Proper power wiring, fusing, speaker impedance, and gain setup remain important for dependable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt RMS Total Output:\u003c\/strong\u003e Delivers 100W x 2 at 4 ohms or 150W x 2 at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Two-Channel Design:\u003c\/strong\u003e Combines channels for 300W RMS into one 4-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoosted Rail Technology:\u003c\/strong\u003e Supports compact amplifier packaging without a traditional switching power supply.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Supports RCA or speaker-level source connections through the input harness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Active Crossover:\u003c\/strong\u003e Select high-pass, low-pass, or all-pass operation from 50-500Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Chassis:\u003c\/strong\u003e Measures only 1.53 inches high, 4.25 inches wide, and 6.75 inches long.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PBR300X2 uses a compact extruded aluminum heatsink with convection cooling and a MOSFET output stage. Power\/Protect and Boosted Rail indicators provide operating-status feedback. Protection circuitry is specified to shut the amplifier down for overheating, very low impedance, or shorted speaker wiring.\u003c\/p\u003e\u003cp\u003eMount the amplifier in a dry, ventilated location with access to its wiring and controls. Use 10 AWG power and ground wiring as recommended, install the specified 30A external battery fuse close to the battery, and keep the ground connection short and secure. Use a 2-ohm-or-higher stereo load or a 4-ohm bridged load, then set the crossover and input level for the connected speakers and source unit.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45637152407622,"sku":"PBR300X2","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71qsN5RP-4L.jpg?v=1784433147"},{"product_id":"rockford-fosgate-pm300x2-300w-2-channel-marine-amplifier","title":"Rockford Fosgate PM300X2 300W 2-Channel Marine Amplifier","description":"\u003cp\u003eThe Rockford Fosgate PM300X2 is a compact 2-channel marine and motorsports amplifier designed to add dedicated power where a source unit alone is not enough. It delivers up to 100 watts RMS per channel at 4 ohms, making it suitable for powering a pair of compatible full-range speakers. It can also be bridged to run a single 4-ohm subwoofer with 300 watts RMS.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for boat, powersports, and other 12-volt audio systems exposed to demanding environments. Its Element Ready design uses a marine-grade two-part epoxy coating on the circuit board and stainless-steel hardware. These measures support installation in systems where moisture, corrosion, vibration, and outdoor conditions are practical concerns.\u003c\/p\u003e\u003cp\u003eThe PM300X2 uses a Class A\/B circuit topology and provides selectable high-pass, low-pass, and all-pass crossover operation. This gives installers flexibility to configure it for coaxial speakers, component speakers, or a subwoofer application. The crossover range from 50 Hz to 250 Hz helps tailor the amplifier to the speakers and system layout being used.\u003c\/p\u003e\u003cp\u003eFor system tuning, the amplifier includes onboard Punch EQ controls for bass and treble adjustment. Its C.L.E.A.N. setup system uses input and output clip indicators to help set levels with compatible equipment. High-level input capability with an Auto Turn-On circuit also supports integration with source units that do not provide conventional RCA preamp outputs.\u003c\/p\u003e\u003cp\u003eThe PM300X2 fits into a moderate-size audio upgrade where compact dimensions and flexible channel configuration are important. RCA pass-through outputs can feed an additional amplifier in an expanded system. It may also be used in stereo\/mono operation when passive crossovers are used on all speakers, allowing a more specialized system configuration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300-Watt Total RMS Power:\u003c\/strong\u003e Supplies 100 watts RMS to each of two 4-ohm channels or 300 watts RMS bridged at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A\/B Topology:\u003c\/strong\u003e Provides full-range amplification in a compact chassis for speaker or subwoofer use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Grade Construction:\u003c\/strong\u003e Uses epoxy-coated circuit boards and stainless-steel hardware for marine and motorsports applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup:\u003c\/strong\u003e Input and output clip indicators assist with setting amplifier gain levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e Selectable high-pass, low-pass, and all-pass modes support different speaker system layouts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Input Capability:\u003c\/strong\u003e Allows connection to compatible factory or aftermarket source units without RCA outputs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PM300X2 uses a cast aluminum heatsink with convection cooling and a stealth top-mounted control panel. Its circuit board has a marine-grade two-part epoxy coating, while the hardware is stainless steel. Protection features include over-current and short-circuit protection, plus a muted turn-on design.\u003c\/p\u003e\u003cp\u003eUse 8 AWG to 4 AWG power wire and 8 AWG to 18 AWG speaker wire with the amplifier's captive C-clamp terminals. A 50-amp fuse is recommended and is not included. Configure the amplifier in stereo for two compatible speaker channels, or bridge it only with a 4-ohm load; passive crossovers are required when using stereo\/mono operation simultaneously.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45637624266822,"sku":"PM300X2","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71snqCEPDfL.jpg?v=1784433386"},{"product_id":"rockford-fosgate-pm500x2-500-watt-2-channel-marine-amplifier","title":"Rockford Fosgate PM500X2 500-Watt 2-Channel Marine Amplifier","description":"\u003cp\u003eThe Rockford Fosgate Punch PM500X2 is a 2-channel marine and motorsports amplifier designed to add substantial power without requiring a large installation footprint. It delivers 150 watts RMS per channel at 4 ohms, 250 watts RMS per channel at 2 ohms, or 500 watts RMS when bridged into a 4-ohm load. Its flexible output configuration makes it suitable for powering speakers, component systems, or a compatible subwoofer setup.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for boats, motorcycles, ATVs, and other systems exposed to changing weather and demanding operating conditions. Its marine-grade two-part epoxy-coated circuit board, stainless-steel hardware, and Element Ready protection help support use around moisture, vibration, UV exposure, dust, and temperature changes. The compact chassis helps preserve available installation space.\u003c\/p\u003e\u003cp\u003eThe PM500X2 uses a Class A\/B output stage for a controlled, full-range sound character with high dynamic power. Its variable high-pass, low-pass, and all-pass crossover options allow the amplifier to be configured for full-range speakers or bass-focused duties. On-board Punch EQ2 provides selectable bass or treble adjustment according to crossover mode.\u003c\/p\u003e\u003cp\u003eRockford Fosgate C.L.E.A.N. setup technology helps simplify gain adjustment with input and output clip indicators. The lighting system gives installers a visual reference while setting source volume and amplifier level, helping identify clipping during setup. An optional PLC2 Punch Level Control can provide remote level adjustment and remote input-clip indication.\u003c\/p\u003e\u003cp\u003eFor system integration, the PM500X2 accepts either high-level or low-level input signals and includes an auto turn-on circuit for high-level connections. RCA pass-thru outputs can send signal onward to another amplifier without requiring a separate splitter. Captive C-clamp terminals accommodate substantial power and speaker wiring for a secure installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e500-Watt Total RMS Power:\u003c\/strong\u003e Provides flexible two-channel or bridged amplification for marine and powersports audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass A\/B Circuitry:\u003c\/strong\u003e Delivers full-range amplification with high dynamic power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElement Ready Construction:\u003c\/strong\u003e Uses marine-focused protection for demanding outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup:\u003c\/strong\u003e Input and output clip indicators assist with practical gain adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossover Network:\u003c\/strong\u003e High-pass, low-pass, and all-pass modes support different speaker system roles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Level Input Capability:\u003c\/strong\u003e Accepts speaker-level signals and supports automatic turn-on operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe PM500X2 uses a cast aluminum heatsink with convection cooling, a marine-grade epoxy-coated PCB, and marine-grade stainless-steel hardware. Its stealth top-mounted control panel keeps primary adjustments accessible while maintaining a clean installation appearance. Protection features include short-circuit and over-current protection, along with muted turn-on operation.\u003c\/p\u003e\u003cp\u003eUse 4 AWG power wiring and protect the power connection with the recommended 80-amp fuse, installed near the battery. The amplifier is rated for 2-ohm stereo operation or 4-ohm bridged operation; match connected speakers and wiring accordingly. Configure the crossover and gain controls during installation, then connect the optional PLC2 only after output clip adjustment if remote level control is desired.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45637898960966,"sku":"PM500X2","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61AFGZg4VML.jpg?v=1784433525"},{"product_id":"rockford-fosgate-r2-200x2-200w-2-channel-amplifier","title":"Rockford Fosgate R2-200X2 200W 2-Channel Amplifier","description":"\u003cp\u003eThe Rockford Fosgate Prime R2-200X2 is a compact full-range Class-D amplifier designed to add dedicated power to a two-speaker car audio system. It delivers up to 50 watts RMS per channel at 4 ohms, making it suitable for upgrading speakers beyond the output available from many factory radios. It can also be configured in bridged mono operation for a compatible 4-ohm load.\u003c\/p\u003e\u003cp\u003eThis amplifier is aimed at listeners building a straightforward speaker upgrade or a compact custom audio system. Its two-channel layout supports a pair of front, rear, or component speakers when power and impedance are matched appropriately. High-level and low-level input options help it work with either factory-style speaker outputs or aftermarket RCA-equipped sources.\u003c\/p\u003e\u003cp\u003eThe R2-200X2 uses full-range Class-D amplification, a topology intended to reduce demand on the vehicle electrical system compared with less-efficient amplifier designs. Its rated power is CTA-2006 compliant, with 100 watts RMS per channel available at 2 ohms. The amplifier has a 20 Hz to 20 kHz frequency response for full-range audio applications.\u003c\/p\u003e\u003cp\u003eRockford Fosgate C.L.E.A.N. setup circuitry uses input and output clip indicators to assist with gain adjustment. Balanced differential inputs are designed to reduce noise introduced through signal cables, while RCA pass-through outputs can send audio signal onward to another amplifier. The P.O.W.E.R. supply is designed to increase output as available vehicle voltage increases.\u003c\/p\u003e\u003cp\u003eThe R2-200X2 is a practical fit for compact systems because it measures 1.9 by 6.8 by 8.1 inches. Adjustable high-pass, low-pass, and all-pass crossover modes let it be tailored for speakers or a bridged compatible subwoofer application. It can serve as a focused two-channel upgrade or as part of a larger multi-amplifier system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class-D Design:\u003c\/strong\u003e Provides efficient full-range amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible RMS Output:\u003c\/strong\u003e Supports 4-ohm, 2-ohm stereo, or 4-ohm bridged operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Setup Circuitry:\u003c\/strong\u003e Clip indicators help set gain levels more accurately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e High-pass, low-pass, and all-pass modes support system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh- And Low-Level Inputs:\u003c\/strong\u003e Connects with factory or aftermarket audio sources.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA Pass-Through Outputs:\u003c\/strong\u003e Allows signal routing to an additional amplifier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier uses a cast-aluminum heatsink and convection cooling, with top-mounted controls for access after installation. Compression terminal blocks are used for power and speaker connections. Power, protect, and C.L.E.A.N. status indicators provide visible operating feedback.\u003c\/p\u003e\u003cp\u003eUse 4 AWG power wiring and a 30-amp fuse installed appropriately in the vehicle power run; the recommended fuse is not included. The amplifier supports RCA low-level input or a 4-pin Molex high-level input, and its crossover should be set according to the speakers or bridged 4-ohm load being used. Disconnect the vehicle battery negative terminal before installation and use secure mounting, correct polarity, and properly sized wiring.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45640018001990,"sku":"R2-200X2","price":239.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71YCrE_H0NL.jpg?v=1784434738"},{"product_id":"rockford-fosgate-t400x2ad-400-watt-2-channel-amplifier","title":"Rockford Fosgate T400X2ad 400-Watt 2-Channel Amplifier","description":"\u003cp\u003eThe Rockford Fosgate Power T400X2ad is an ultra-compact two-channel car amplifier designed for adding substantial full-range power where installation space is limited. It delivers 200 watts RMS per channel at either 2 or 4 ohms, making it suitable for powering upgraded component speakers, coaxial speakers, or a compact high-output system. Its small chassis helps make amplifier placement easier in cars, trucks, motorcycles, and side-by-side UTVs.\u003c\/p\u003e\u003cp\u003eThis amplifier is intended for listeners who need more clean output than a factory or aftermarket receiver can provide. Its Class-AD circuit topology is engineered for efficient operation, with average efficiency rated above 75 percent. The T400X2ad can be used as a stereo amplifier for a left and right speaker pair or bridged to power one compatible 4-ohm load.\u003c\/p\u003e\u003cp\u003eRockford Fosgate Constant Power technology allows the amplifier to produce its rated 200 watts RMS per channel at both 4-ohm and 2-ohm stereo loads. This gives installers flexibility when selecting compatible speakers without changing the rated stereo output. Dynamic Power ratings are specified at 223 watts x 2 at 4 ohms, 248 watts x 2 at 2 ohms, and 449 watts bridged at 4 ohms.\u003c\/p\u003e\u003cp\u003eSystem tuning is supported by variable high-pass and low-pass filters, each adjustable from 50 Hz to 250 Hz with 12 dB\/octave Butterworth slopes. A selectable all-pass setting is also available, while onboard treble and bass controls allow targeted adjustment at 12.5 kHz and 45 Hz. Input and output clip indicators support more careful gain setup.\u003c\/p\u003e\u003cp\u003eThe T400X2ad accepts high-level or low-level signal through its 4-pin input harness and supports automatic turn-on when using high-level input. Its compact housing includes top-mounted controls, dual fan cooling, and detachable power and speaker connectors. It is a practical choice for a focused two-speaker upgrade or as a bridged amplifier in a compact audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant Power Output:\u003c\/strong\u003e Delivers 200 watts RMS per channel at 2 or 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClass-AD Topology:\u003c\/strong\u003e Provides efficient full-range amplification in a compact chassis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridgeable Two-Channel Design:\u003c\/strong\u003e Supports 400 watts RMS to one 4-ohm bridged load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh\/Low-Level Inputs:\u003c\/strong\u003e Helps integrate with aftermarket or factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Crossovers:\u003c\/strong\u003e Tailor speaker frequency range from 50 Hz to 250 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eC.L.E.A.N. Clip Indicators:\u003c\/strong\u003e Helps identify input and output clipping during setup.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe T400X2ad uses a compact 1.6 x 4.3 x 7-inch chassis with top-mounted adjustment controls for convenient access after installation. Dual fan cooling and dual extruded heat sinks are used to manage heat in demanding installations. Blue power and red protect indicators provide at-a-glance operating status.\u003c\/p\u003e\u003cp\u003ePlan for 8 AWG power wiring, a properly sized 60-amp fuse, secure grounding, and adequate airflow around the amplifier. Use the high-pass filter for full-range speakers or the low-pass filter for appropriate bass-duty applications; select all-pass only when filtering is handled elsewhere in the system. For bridged use, connect only a compatible 4-ohm load to the specified left-positive and right-negative speaker terminals.\u003c\/p\u003e","brand":"Rockford Fosgate","offers":[{"title":"Default Title","offer_id":45657830260806,"sku":"T400X2AD","price":459.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61owNiaz_vL.jpg?v=1784444958"},{"product_id":"soundxtreme-st-2500-2-2-channel-class-ab-car-amplifier","title":"SoundXtreme ST-2500-2 2-Channel Class AB Car Amplifier","description":"\u003cp\u003eThe SoundXtreme ST-2500-2 is a 2-channel Class AB car audio amplifier designed for systems that need substantial output with adjustable crossover control. It can be used to power compatible full-range speakers or subwoofers, depending on system wiring and tuning. Its 2-ohm and 4-ohm operating capability gives installers flexibility when matching speakers to the amplifier.\u003c\/p\u003e\u003cp\u003eThis amplifier is suited to enthusiasts building a higher-output aftermarket audio system in a car, truck, RV, ATV, or similar 12-volt application. Separate high-pass and low-pass filter ranges help direct appropriate frequencies to the connected speakers. Variable gain adjustment also helps match the amplifier to the output level of the source unit.\u003c\/p\u003e\u003cp\u003eThe ST-2500-2 uses a Class AB MOSFET power supply design and is rated for up to 5,000 watts maximum output. Confirmed power figures are 2,500 watts per channel at 2 ohms and 1,250 watts per channel at 4 ohms, both specified at 1% THD. It is a stereo amplifier that can also be configured for bridgeable and tri-mode operation where the speaker setup supports it.\u003c\/p\u003e\u003cp\u003eFor signal management, the amplifier provides a continuously variable 12 dB\/octave high-pass crossover from 80 Hz to 1.2 kHz and a low-pass crossover from 50 Hz to 250 Hz. Its rated frequency response is 10 Hz to 30 kHz, supporting subwoofer-focused and full-range system applications. A remote subwoofer level control is included for convenient level adjustment from the listening position.\u003c\/p\u003e\u003cp\u003eThe ST-2500-2 fits into an upgrade path for systems that need more external amplification than a factory or aftermarket receiver can provide. Chrome-plated RCA connections, variable gain, LED status indicators, soft start, and muting functions support practical integration into a 12-volt car audio installation. Proper power wiring, fusing, speaker impedance, and gain setup are important for dependable operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-Channel Class AB Design:\u003c\/strong\u003e Provides stereo amplification for compatible speakers or subwoofers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Stable Operation:\u003c\/strong\u003e Supports compatible 2-ohm and 4-ohm speaker loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Crossovers:\u003c\/strong\u003e HPF and LPF controls help tailor frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Level Control:\u003c\/strong\u003e Lets the listener adjust subwoofer level conveniently.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Gain Control:\u003c\/strong\u003e Helps match amplifier input level to the source unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus And Protection Indicators:\u003c\/strong\u003e LED lights provide at-a-glance operating feedback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe amplifier uses a metal chassis with a Class AB MOSFET PWM power supply architecture. Chrome-plated RCA and power\/speaker terminal connections are specified, while soft-start and muting functions are included as part of its operating design. The chassis measures 9.5 inches wide, 2.5 inches high, and 24.3 inches deep.\u003c\/p\u003e\u003cp\u003eMount the amplifier securely in a ventilated location and use appropriately sized power, ground, speaker, and signal wiring for the installation. Set the gain only after the source unit and speakers are connected, then use the HPF or LPF controls to suit the speakers being powered. Verify final speaker impedance before wiring, as the amplifier is specified for 2-ohm and 4-ohm operation rather than 1-ohm operation.\u003c\/p\u003e","brand":"SoundXtreme","offers":[{"title":"Default Title","offer_id":45660509438022,"sku":"ST-2500-2","price":282.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61_-DMid5KL.jpg?v=1784447356"}],"url":"https:\/\/audiowatt.store\/collections\/2-channel-amplifiers.oembed?page=2","provider":"Audio Watt Store","version":"1.0","type":"link"}