{"title":"10 Inch Subwoofers","description":null,"products":[{"product_id":"audio360-ad1500us-10-powered-under-seat-subwoofer","title":"Audio360 AD1500US 10\" Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe AUDIO360 AD1500US is a compact powered subwoofer system designed to add low-frequency output to vehicle audio systems without requiring a separate subwoofer enclosure and external amplifier. Its integrated 10-inch, 4-ohm woofer and built-in amplifier are housed in a shallow enclosure intended for under-seat or limited-space installations. It is a practical option for drivers who want more bass while preserving usable cargo and cabin space.\u003c\/p\u003e\u003cp\u003eRated for up to 1500 watts of peak power, the AD1500US is intended to provide added bass impact for factory and aftermarket sound systems. Its published frequency response is 55Hz to 20kHz, with a signal-to-noise ratio above 90dB and total harmonic distortion below 0.4%. These specifications support a clean, controlled addition of low-end reinforcement when the system is set up correctly.\u003c\/p\u003e\u003cp\u003eAn adjustable low-pass filter from 50Hz to 150Hz lets the subwoofer be matched to the frequency range handled by the vehicle's main speakers. This allows the installer to set the handoff point according to the speakers, source unit, and listening preference. A 20Hz subsonic filter is also specified to limit very low frequencies outside the intended operating range.\u003c\/p\u003e\u003cp\u003eThe AD1500US includes variable bass boost adjustment from 0 to +24dB for tailoring bass emphasis. High-level and low-level input options support integration with either factory speaker-output signals or aftermarket receiver preamp signals. Published input sensitivity is 0.9V for high-level input and 300mV for low-level input.\u003c\/p\u003e\u003cp\u003eAt 345 x 262 x 68mm, the enclosure is built for installations where conventional subwoofer boxes are impractical. The slim 68mm profile can suit many under-seat and shallow cargo-area locations, subject to vehicle clearance and safe mounting access. Integrated circuit protection and a 25A fuse are specified to help protect the powered subwoofer during operation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Woofer:\u003c\/strong\u003e Combines a 10-inch 4-ohm woofer and built-in amplifier in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Peak Rating:\u003c\/strong\u003e Provides a published maximum peak-power rating for added bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Offers 50Hz to 150Hz tuning for blending with full-range speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Adjusts bass emphasis from 0 to +24dB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Compatibility:\u003c\/strong\u003e Supports high-level and low-level source connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Enclosure:\u003c\/strong\u003e Measures 68mm deep for space-conscious vehicle installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AD1500US uses an all-in-one powered-subwoofer enclosure design, combining the woofer and amplifier in a compact 345 x 262 x 68mm housing. The published information confirms integrated circuit protection and a 25A fuse, but does not identify the enclosure, cone, or surround materials. Its shallow form factor is designed for applications with restricted mounting depth.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a location with adequate clearance, ventilation, and protection from cargo or passenger contact. Use the supplied power and signal wiring harness as applicable, choose high-level input for speaker-output signals or low-level input for receiver preamp signals, and set the low-pass filter and bass boost conservatively before final tuning. Confirm under-seat clearance, wiring routes, and vehicle electrical requirements before installation.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45613491093574,"sku":"AD1500US","price":183.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71W8-sfWDzL.jpg?v=1784350681"},{"product_id":"audio360-ads1040-shallow-10-shallow-mount-car-subwoofer","title":"AUDIO360 ADS1040-SHALLOW 10\" Shallow-Mount Car Subwoofer","description":"\u003cp\u003eThe AUDIO360 ADS1040-SHALLOW is a 10-inch shallow-mount car subwoofer designed for vehicle audio systems with limited installation depth. Its low-profile form factor helps make bass upgrades practical in trucks, compact vehicles, under-seat locations, and custom enclosures where a conventional deep subwoofer may not fit. The driver uses a 4-ohm configuration for integration with compatible aftermarket amplification.\u003c\/p\u003e\u003cp\u003eRated for 600 watts RMS and 1,200 watts maximum power, the ADS1040 is intended for systems that need substantial low-frequency output from a compact driver. Its shallow design focuses on installation flexibility without changing the basic role of a dedicated subwoofer in a car audio system. Proper amplifier gain setting and enclosure construction remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe subwoofer has a 3.62-inch mounting depth, providing a space-conscious option for builds with restricted rear clearance. A 9.25-inch cutout diameter is specified for enclosure planning and fitment. These dimensions should be checked against the available mounting surface, enclosure depth, and clearance behind the speaker before installation.\u003c\/p\u003e\u003cp\u003eAUDIO360 specifies a rigid, low-profile cone for the ADS1040. This construction is intended to support controlled bass reproduction while fitting the shallow-mount format. The available product information does not identify the cone's exact material composition, voice-coil details, magnet specifications, or frequency-response measurements.\u003c\/p\u003e\u003cp\u003eThe ADS1040 can be used in either sealed or ported enclosure designs according to the available listing information. A sealed enclosure may suit listeners seeking a compact installation, while a ported design can be selected when the enclosure is engineered for the subwoofer and the available space. Pair it with a compatible 4-ohm amplifier setup and an enclosure designed with the specified mounting dimensions in mind.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow-Mount Design:\u003c\/strong\u003e Provides subwoofer capability for installations with limited mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,200W Maximum Power:\u003c\/strong\u003e States the product's listed peak power-handling rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Supports connection with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.62-Inch Mounting Depth:\u003c\/strong\u003e Helps accommodate compact and space-restricted enclosure locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Allows enclosure selection based on installation goals and available space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1040 uses a rigid low-profile cone and a shallow-mount driver layout. This design is intended to reduce mounting-depth requirements while retaining a dedicated 10-inch woofer format. Exact material composition, magnet data, voice-coil specifications, and included mounting hardware are not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003ePlan the enclosure around the specified 9.25-inch cutout diameter and allow at least 3.62 inches of mounting depth, plus practical clearance for terminals and wiring. Verify physical clearance in the intended truck, under-seat, or custom location before cutting a panel. Use a compatible 4-ohm amplifier configuration and follow the amplifier and enclosure manufacturer's wiring and setup guidance.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614097924166,"sku":"ADS1040-SHALLOW","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61AZcUDJSNL.jpg?v=1784358434"},{"product_id":"audio360-ads1050-10-inch-car-subwoofer","title":"Audio360 ADS1050 10-Inch Car Subwoofer","description":"\u003cp\u003eThe Audio360 ADS1050 is a 10-inch car subwoofer designed for adding dedicated low-frequency output to a custom vehicle audio system. It is a raw subwoofer driver, so it is intended to be installed in a compatible enclosure and powered by an external amplifier. Its 4-ohm impedance and 750-watt RMS power-handling rating make it suited to systems planned around a single subwoofer channel.\u003c\/p\u003e\u003cp\u003eThis model is for listeners who want to supplement factory or aftermarket full-range speakers with deeper bass reproduction. The 10-inch format offers a compact alternative to larger subwoofers while still supporting substantial power handling. It can be used in a range of vehicle applications when enclosure space and mounting clearance are verified first.\u003c\/p\u003e\u003cp\u003eThe ADS1050 is rated for 750 watts RMS and 1,500 watts maximum power handling. These ratings help guide amplifier selection, with the RMS figure being the more useful number for continuous power matching. A properly adjusted amplifier and correctly configured crossover are important for dependable system operation.\u003c\/p\u003e\u003cp\u003eAudio360 specifies the ADS1050 for either sealed or ported enclosures. A sealed enclosure is generally chosen when a more controlled bass character is desired, while a ported enclosure can be selected when the enclosure is designed for greater output. Enclosure volume, port tuning, and installation details are not specified in the confirmed product data and should be planned separately.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses heavy-duty cone and surround construction for high-output use. Its 5.12-inch mounting depth and 9.06-inch cutout diameter provide the key fitment measurements needed when selecting or building an enclosure. Confirm available depth, cutout size, mounting-hole pattern, and enclosure suitability before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e750W RMS Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous power capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1500W Maximum Power:\u003c\/strong\u003e Provides a stated peak power-handling reference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Adds dedicated bass capability in a space-conscious format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with compatible aftermarket amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed or Ported Use:\u003c\/strong\u003e Supports different enclosure approaches for system tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Fitment:\u003c\/strong\u003e Uses a 5.12-inch mounting depth and 9.06-inch cutout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe ADS1050 is built around a heavy-duty cone and surround assembly intended for car-audio subwoofer duty. Audio360 identifies the driver as suitable for high-output conditions, while the 10-inch size helps it fit installations where larger subwoofers may not be practical. Specific cone material, surround material, voice-coil details, magnet specifications, and sensitivity are not confirmed in the available product information.\u003c\/p\u003e\u003cp\u003eInstall the ADS1050 in a properly constructed sealed or ported enclosure that accommodates its 9.06-inch cutout diameter and at least 5.12 inches of mounting depth. Pair it with a compatible external amplifier, set gain conservatively, and use appropriate filtering to limit the driver to bass frequencies. An enclosure, amplifier, wiring, and mounting hardware should be planned separately unless supplied by the selling package.\u003c\/p\u003e","brand":"Audio360","offers":[{"title":"Default Title","offer_id":45614099398726,"sku":"ADS1050","price":66.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/716f0RT12cL.jpg?v=1784358468"},{"product_id":"audiotek-at-800us-10-slim-powered-under-seat-subwoofer","title":"Audiotek AT-800US 10\" Slim Powered Under-Seat Subwoofer","description":"\u003cp\u003eThe Audiotek AT-800US is a 10-inch powered subwoofer enclosure designed to add low-frequency output to a car or truck audio system without requiring a separate external amplifier. Its slim, angled enclosure is intended for space-conscious installations, including under-seat, trunk, or behind-seat locations where clearance permits. The integrated amplifier and enclosure simplify a bass upgrade compared with assembling separate subwoofer, box, and amplifier components.\u003c\/p\u003e\u003cp\u003eThis model is suited to drivers who want more bass presence from factory or aftermarket speakers while retaining usable cabin and cargo space. It accepts both RCA low-level and speaker-level signals, allowing it to work with many head units and factory-radio integration setups. Check available clearance and plan the power, ground, and turn-on connections before installation.\u003c\/p\u003e\u003cp\u003eConfirmed published specifications list 200 watts RMS and 400 watts peak output for the AT-800US. Its bass adjustments include variable gain, a built-in low-pass filter, selectable phase, and a variable bass boost control. These controls help match bass level and blend the subwoofer with the vehicle's main speakers.\u003c\/p\u003e\u003cp\u003eThe AT-800US uses an aluminum chassis intended to help dissipate heat during operation, while a front metal grille helps protect the subwoofer driver. Power and protection LED indicators provide basic operating-status feedback. Overheat and reverse-polarity protection are also listed for the integrated powered enclosure.\u003c\/p\u003e\u003cp\u003eAs an active subwoofer, the AT-800US is a self-contained addition to a vehicle audio system rather than a passive subwoofer requiring an outboard amplifier. A wired remote level control is included for convenient bass adjustment from the cabin. It can be used as a compact bass foundation in an OEM-radio upgrade or paired with an aftermarket receiver that has RCA preamp outputs.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Active Subwoofer:\u003c\/strong\u003e Combines a subwoofer, enclosure, and amplifier in one unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlim Angled Enclosure:\u003c\/strong\u003e Supports space-conscious under-seat, trunk, or behind-seat placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Provides continuous power handling listed for the integrated system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Input Options:\u003c\/strong\u003e Accepts RCA low-level or speaker-level audio signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Bass Controls:\u003c\/strong\u003e Includes gain, low-pass filter, phase, and bass boost adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Remote Level Control:\u003c\/strong\u003e Lets the listener adjust bass level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AT-800US is built around a slim aluminum chassis with an angled enclosure profile. Its aluminum construction is listed to assist heat dissipation, and the front metal grille helps shield the driver from incidental contact. Power and protection indicators provide visible operating feedback.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a ventilated location with sufficient clearance, such as under a seat, in a trunk, or behind a rear seat. Connect fused battery power, a short chassis ground, remote turn-on, and either RCA low-level or speaker-level signal wiring as appropriate for the vehicle. Set gain, low-pass filter, bass boost, and phase gradually after installation to blend the subwoofer with the rest of the system.\u003c\/p\u003e","brand":"Audiotek","offers":[{"title":"Default Title","offer_id":45614188560454,"sku":"AT-800US","price":158.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81d4-UCal6L.jpg?v=1784359768"},{"product_id":"audison-apbx10ds-prima-10-sealed-subwoofer-enclosure","title":"Audison APBX10DS Prima 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Audison APBX10DS is a passive 10-inch subwoofer system supplied in a compact, sealed enclosure. It is designed for adding controlled low-frequency output to a vehicle audio system without building a custom subwoofer box. Its 12-liter enclosure and shallow overall profile help make it practical for trunk installations where available space is limited.\u003c\/p\u003e\u003cp\u003eThis model uses a dual 4-ohm subwoofer configuration and is rated for 400 watts continuous power handling and 800 watts peak power handling. It is intended for use with an external subwoofer amplifier, rather than operating as a powered enclosure. The sealed-box design supports a concise, controlled bass character suited to a wide range of music.\u003c\/p\u003e\u003cp\u003eThe enclosure uses Audison's 2S², or 2 Sides\/2 Sounds, layout. It can be installed with the driver facing down to emphasize low-frequency extension, or facing up for a more direct presentation with added punch and definition. This gives installers flexibility to tune placement around cargo-space and listening priorities.\u003c\/p\u003e\u003cp\u003eThe APBX10DS is built around the APS 10 D driver, with a high-density flux ferrite motor and a water-repellent pressed-paper cone. Its cone, dustcap, and basket geometry is engineered for long linear excursion, specified at 11 mm one-way. A substantial motor assembly optimized with FEM modeling helps maintain driver control during higher-excursion operation.\u003c\/p\u003e\u003cp\u003eFor system integration, the enclosure includes Audison's SSP Sub Smart Plug connection system, combining conventional push terminals with a plug-and-play terminal block. It was developed to pair with compatible Audison amplified and DSP-based systems, while its passive design also leaves amplifier selection to the installer. Leveling feet with Velcro inserts and a supplied metal protection grille support practical everyday installation and use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Sealed Enclosure:\u003c\/strong\u003e Delivers installed bass reinforcement in a compact 12-liter cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Handling:\u003c\/strong\u003e Supports matching with a suitably rated external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Configuration:\u003c\/strong\u003e Provides impedance setup flexibility through the enclosure connection system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Mounting Design:\u003c\/strong\u003e Allows down-firing or up-firing installation to suit the application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSP Sub Smart Plug:\u003c\/strong\u003e Combines push terminals and a quick-release plug-and-play terminal block.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal Driver Grille:\u003c\/strong\u003e Helps protect the subwoofer driver in cargo-area installations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APBX10DS uses a sealed, ultra-low-profile cabinet with rounded corners that aid positioning and help reinforce the enclosure structure. Its 10-inch driver combines a high-density flux ferrite magnet with a water-repellent pressed-paper cone. The supplied metal grille provides driver protection, while leveling feet with Velcro inserts help keep the enclosure stable on carpeted surfaces.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer enclosure and requires an external amplifier plus appropriate signal routing and power wiring. Confirm amplifier stability and configure the 4+4-ohm impedance through the SSP connection system before final wiring. The enclosure may be mounted driver-up or driver-down, but allow clearance for the grille, feet, wiring connection, and driver movement.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614221295686,"sku":"APBX10DS","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71pmR6NyCjL.jpg?v=1784362282"},{"product_id":"audison-aps10d-prima-10-dual-4-ohm-subwoofer","title":"Audison APS10D Prima 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Audison APS 10 D is a 10-inch dual-voice-coil subwoofer from the Prima series, designed for vehicle bass upgrades where enclosure space is limited. It is intended for sealed enclosures beginning at 10 liters, making it suitable for compact trunk, hatch, and custom-install applications. Its 4+4-ohm voice-coil arrangement gives installers wiring flexibility when matching an appropriate amplifier.\u003c\/p\u003e\u003cp\u003eThis driver is built for listeners who want to add low-frequency foundation without committing to a deep, large-volume subwoofer installation. It handles 400 watts continuous power and 800 watts peak power, with a 27 Hz resonant frequency and 84 dB sensitivity. The design focuses on controlled bass performance from a compact sealed enclosure rather than requiring a large box.\u003c\/p\u003e\u003cp\u003eAudison uses a cone, dustcap, and basket geometry designed to support substantial excursion while limiting installation depth. The APS 10 D has a 12.6 mm maximum linear excursion rating and an 88 mm mounting depth. This combination helps make the driver practical for installations where rear clearance is restricted.\u003c\/p\u003e\u003cp\u003eA water-repellent pressed-paper cone is paired with a high-density flux ferrite motor assembly. The motor is optimized with finite element modeling to maintain control under high-power and high-excursion use. Venting beneath the spider eliminates the need for a central pole vent, allowing the driver to sit closer to the enclosure's rear wall when properly installed.\u003c\/p\u003e\u003cp\u003eThe APS 10 D can complement an OEM-integration or aftermarket audio system when paired with a compatible external amplifier and sealed enclosure. Its dual 4-ohm coils can be wired to suit the amplifier's supported load. A steel mesh grille and plastic gasket are included to support a finished installation and help protect the driver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Delivers bass performance in sealed enclosures starting at 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Handling:\u003c\/strong\u003e Supports appropriately matched external amplification for sustained listening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow Mounting Depth:\u003c\/strong\u003e The 88 mm mounting depth helps fit restricted installation locations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses a durable cone material developed for subwoofer operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasket-Integrated Venting:\u003c\/strong\u003e Allows closer placement to the enclosure rear wall.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 D uses a high-density flux ferrite magnet, 60 mm voice coil, water-repellent pressed-paper cone, and a steel mesh grille. Its basket geometry and surround\/spider design are engineered to support linear cone travel while helping limit rocking motion. The included plastic gasket helps provide a neat interface between the driver and mounting surface.\u003c\/p\u003e\u003cp\u003eUse this subwoofer in a sealed enclosure with an internal volume starting at 10 liters; a 10 to 12 liter enclosure is specified for compact applications. Confirm the 270 mm outside diameter, 233 mm cutout diameter, and 88 mm mounting depth before building or modifying an enclosure. Wire the dual 4-ohm coils only in a configuration supported by the connected amplifier, and set amplifier gain and filtering appropriately during installation.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614230208582,"sku":"APS10D","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71RnLhIPHoL.jpg?v=1784362997"},{"product_id":"audison-aps-10-s4s-10-4-ohm-shallow-subwoofer","title":"Audison APS 10 S4S 10\" 4-Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Audison APS 10 S4S is a 10-inch shallow subwoofer driver designed for car-audio systems that need meaningful low-frequency reinforcement without requiring a large enclosure. Its single 4-ohm voice coil configuration makes it a straightforward choice for a dedicated subwoofer amplifier channel or a bridged amplifier setup. It is intended for custom sealed enclosures with internal volume starting at 10 liters.\u003c\/p\u003e\u003cp\u003eThis Prima-series subwoofer addresses installations where mounting depth and enclosure space are limited, such as compact trunks, underfloor areas, and vehicle-specific build locations. Its 120 mm ultra-low-profile design helps reduce the space required behind the driver. Basket ventilation beneath the spider also eliminates the need for a central pole vent, helping support close placement to an enclosure’s rear wall.\u003c\/p\u003e\u003cp\u003eRated for 400 watts continuous power and 800 watts peak power, the APS 10 S4S is built for properly amplified bass duty in a sealed system. Its 4-ohm nominal impedance and single voice coil simplify amplifier matching compared with multi-coil wiring arrangements. The driver uses a 60 mm voice coil, a high-density-flux ferrite motor, and a water-repellent pressed-paper cone.\u003c\/p\u003e\u003cp\u003eAudison engineers the cone, dustcap, and basket geometry to support long linear excursion while maintaining a compact mounting profile. The driver has 12.6 mm Xmax and an 18 mm mechanical excursion specification. Its motor assembly is optimized using finite-element modeling for control under high-power, high-excursion operating conditions.\u003c\/p\u003e\u003cp\u003eThe APS 10 S4S is a component subwoofer, so a separate enclosure, amplifier, wiring, and installation hardware are needed to complete a system. It can serve as a compact bass upgrade alongside factory or aftermarket speakers when installed in a correctly sized sealed enclosure. A steel mesh grille and plastic gasket are included to help protect the driver and finish the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Design:\u003c\/strong\u003e Provides compact bass capability with a 120 mm ultra-low profile.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Rating:\u003c\/strong\u003e Supports sustained subwoofer power handling in a properly configured system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Simplifies wiring to a compatible 4-ohm amplifier channel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Optimization:\u003c\/strong\u003e Designed for sealed enclosures starting at 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Uses treated pressed paper for the moving cone assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Protection Grille:\u003c\/strong\u003e Steel mesh grille helps protect the installed subwoofer driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 S4S combines a high-density-flux ferrite magnet with a 60 mm voice coil and water-repellent pressed-paper cone. Its basket includes vents beneath the spider, while the shallow geometry is designed to retain excursion capability in a compact format. The supplied steel mesh grille and plastic gasket provide practical finishing and protection components.\u003c\/p\u003e\u003cp\u003eInstall this driver in a custom sealed enclosure with at least 10 liters of volume, allowing for the driver’s 1.12-liter displacement during enclosure planning. Verify the 270 mm outside diameter, 233 mm Dimension B, and 88 mm mounting-depth measurement against the available mounting location before cutting. Use an amplifier that is stable at 4 ohms, set gains carefully, and configure the system’s crossover and enclosure construction for subwoofer use.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614230732870,"sku":"APS10S4S","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Exi-yjeZL.jpg?v=1784363040"},{"product_id":"audison-av-10-d2-ii-10-shallow-subwoofer","title":"Audison AV 10 D2 II 10\" Shallow Subwoofer","description":"\u003cp\u003eThe Audison AV 10 D2 II is a 10-inch shallow subwoofer designed to add controlled low-frequency output where installation depth and enclosure space are limited. Its dual 2-ohm voice-coil design gives system builders flexibility when matching the subwoofer to a compatible amplifier. It is a focused option for listeners building a compact, sound-quality-oriented car audio system.\u003c\/p\u003e\u003cp\u003eWith 550 watts RMS continuous power handling and an 1,100-watt peak rating, the AV 10 D2 II is built for substantial bass output without requiring an oversized driver. Its stated 25 Hz to 400 Hz frequency response supports low bass reproduction as well as flexible crossover integration. The sound character is intended to be deep, articulate, and controlled rather than loose or boomy.\u003c\/p\u003e\u003cp\u003eA 38.6 mm CCAW voice coil combines copper-clad aluminum wire construction with a glass-fiber former to support thermal management and moving-mass control. Audison's Airflow Venting Cooling system is designed to improve internal airflow around the motor structure. This helps the driver maintain more consistent operation during extended high-output use.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a die-cast aluminum chassis, high-density-flux ferrite magnet, polypropylene cone, and nitrile rubber surround. Its extended-profile dust cap and internal Radial Reinforcement Framework are intended to reinforce cone and basket behavior during high-excursion operation. The result is a rigid shallow-driver platform designed for accurate cone control.\u003c\/p\u003e\u003cp\u003eThe AV 10 D2 II is optimized for compact sealed enclosures, with Audison listing a 13.2 L recommended enclosure and also providing sealed and reflex enclosure designs. It can serve as the low-frequency foundation of a VOCE II speaker system or complement other quality front-stage components. A protective metal mesh grille and mounting screws are included for cone protection and installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Design:\u003c\/strong\u003e Fits systems where available mounting depth is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W RMS Handling:\u003c\/strong\u003e Supports sustained bass output with appropriate amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Balances thermal capability with reduced moving mass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Helps manage heat during extended listening sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Enclosure Optimization:\u003c\/strong\u003e Delivers controlled bass from small sealed-box designs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 10 D2 II uses a die-cast aluminum basket for rigidity and heat dissipation, paired with a high-density-flux ferrite motor. Its polypropylene cone, nitrile rubber surround, glass-fiber voice-coil former, and reinforced mechanical structure are selected for stable operation at higher excursion. A black protective metal mesh grille is included to help protect the cone after installation.\u003c\/p\u003e\u003cp\u003eUse an enclosure designed around Audison's published recommendations and confirm the mounting cutout, depth, and clearance in the intended vehicle before installation. The dual 2-ohm coils should be wired only to an amplifier that is stable at the resulting load, with crossover and subsonic-filter settings matched to the enclosure type. Audison suggests a 70-80 Hz low-pass filter at 24 dB\/octave and a 15 Hz subsonic filter at 24 dB\/octave for its sealed-box design.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614234009670,"sku":"AV 10 D2 II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71RyxIU_0L.jpg?v=1784363310"},{"product_id":"audison-av-10-d4-ii-10-shallow-subwoofer","title":"Audison AV 10 D4 II 10\" Shallow Subwoofer","description":"\u003cp\u003eThe Audison AV 10 D4 II is a 10-inch shallow subwoofer driver designed for car audio systems that need authoritative low-frequency support without requiring a large enclosure. Its dual 4-ohm voice coil layout gives installers flexibility when matching the subwoofer to a compatible amplifier. It is intended for listeners building refined OEM-upgrade or custom systems where available cargo space is limited.\u003c\/p\u003e\u003cp\u003eThis VOCE II subwoofer is voiced for deep, controlled bass with a quick and defined character. Its 25-400 Hz frequency response and 550-watt continuous power handling make it suitable for systems that need a solid low-end foundation while maintaining clear integration with the front speakers. The compact sealed-box focus makes it especially practical for space-conscious installations.\u003c\/p\u003e\u003cp\u003eA 38.6 mm CCAW voice coil combines copper-clad aluminum wire construction with a glass-fiber former. Audison pairs this assembly with its Airflow Venting Cooling system to help manage heat during sustained playback. The result is a design intended to retain consistent behavior when driven by an appropriately matched amplifier.\u003c\/p\u003e\u003cp\u003eThe AV 10 D4 II uses a die-cast aluminum basket, high-density-flux ferrite magnet, polypropylene cone, and extended-profile dust cap. Its Radial Reinforcement Framework is designed to add structural support beneath the cone, while the FEM-optimized magnetic circuit concentrates magnetic flux at the voice-coil gap. These construction details support controlled excursion and mechanical stability.\u003c\/p\u003e\u003cp\u003eFor a straightforward upgrade path, the AV 10 D4 II can be installed in a custom sealed enclosure or paired with a compatible Audison enclosure solution. Audison specifies compact sealed enclosures around 12-14 liters for its intended performance character. Heavy-duty spring terminals and integrated cable-routing hooks help support a clean, serviceable installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible mono amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Supports sustained power in properly configured systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCCAW Voice Coil:\u003c\/strong\u003e Balances low moving mass with thermal capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Venting Cooling:\u003c\/strong\u003e Helps manage voice-coil heat during extended playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Delivers controlled bass from smaller enclosure volumes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Metal Grille:\u003c\/strong\u003e Helps protect the cone after installation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AV 10 D4 II is built around a die-cast aluminum chassis with a magnet cover, a high-density-flux ferrite motor, and a polypropylene cone. Its extended-profile dust cap and Radial Reinforcement Framework are engineered to increase cone rigidity and damping. Audison also includes a black metal mesh grille and mounting screws for cone protection and finishing detail.\u003c\/p\u003e\u003cp\u003eUse this subwoofer with an amplifier whose output and minimum stable impedance suit the selected dual-voice-coil wiring configuration. Audison recommends compact sealed enclosures in the 12-14 L range, with published compact and performance sealed-box plans available for custom fabrication. Set a low-pass filter around 70-80 Hz at 24 dB\/octave, and use adequate enclosure clearance for the driver and its wiring terminals.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614234370118,"sku":"AV 10 D4 II","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71RyxIU_0L_17519553-d352-4766-858d-c66c00f3c5bc.jpg?v=1784363349"},{"product_id":"audison-avbx-10-d4-ii-10-sealed-subwoofer-enclosure","title":"Audison AVBX 10 D4 II 10\" Sealed Subwoofer Enclosure","description":"\u003cp\u003eThe Audison AVBX 10 D4 II is a compact, passive 10-inch sealed subwoofer enclosure designed for vehicle audio systems where installation space is limited. It combines a factory-loaded AV 10 D4 II dual-voice-coil subwoofer with an enclosure acoustically matched to the driver. This makes it a practical low-frequency upgrade for OEM-integrated and custom car audio systems.\u003c\/p\u003e\u003cp\u003eIts sealed, ultra-shallow enclosure is intended to produce controlled and articulate bass while taking up less space than a conventional large subwoofer box. The 25-400 Hz frequency response supports low-bass reproduction as well as integration with a properly configured front speaker system. With 550 watts continuous power handling, it is suited to an external amplifier selected and set up for the subwoofer's dual 4-ohm voice-coil configuration.\u003c\/p\u003e\u003cp\u003eThe AVBX 10 D4 II uses a 4+4-ohm dual voice coil, giving an installer flexibility when planning amplifier and system wiring. The loaded AV 10 D4 II driver uses a CCAW voice coil, glass-fiber former, polypropylene cone with mica injection, and rubber surround. Its 16.8 mm Xmax and 20 mm Xmech specifications support controlled cone travel within the enclosure design.\u003c\/p\u003e\u003cp\u003eAudison builds the enclosure from 15 mm high-density MDF and adds internal bracing to help limit panel vibration and unwanted enclosure resonance. The driver uses an aluminum chassis and high-density-flux ferrite magnet assembly. Together, these construction details support a rigid platform for the installed subwoofer.\u003c\/p\u003e\u003cp\u003eFor placement flexibility, Audison's 2S² architecture allows the AVBX 10 D4 II to be used in either down-firing or up-firing orientation. Its Sub Smart Plug terminal combines a plug-and-play quick-release connection with conventional push terminals. This makes the enclosure appropriate for installations that require accessible wiring or periodic removal for cargo-space use.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Loaded Enclosure:\u003c\/strong\u003e A complete sealed subwoofer box with a 250 mm AV 10 D4 II driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e550W Continuous Handling:\u003c\/strong\u003e Supports systems using an appropriately matched external subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Design:\u003c\/strong\u003e Helps fit bass reinforcement into space-conscious vehicle installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm MDF Construction:\u003c\/strong\u003e High-density panels and internal bracing help control enclosure vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation System:\u003c\/strong\u003e Supports either down-firing or up-firing placement in the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe AVBX 10 D4 II uses a sealed enclosure constructed from 15 mm high-density MDF with internal bracing. The installed subwoofer features an aluminum chassis, high-density-flux ferrite magnet, CCAW voice coil, glass-fiber former, polypropylene-with-mica cone, and rubber surround. Audison specifies a compact enclosure footprint with dimensions identified as A: 531 mm, B: 361 mm, and C: 160 mm.\u003c\/p\u003e\u003cp\u003eThis is a passive subwoofer box, so it requires an external amplifier and proper speaker wiring; an installer should account for the dual 4-ohm voice coils when designing the final load. Use the Sub Smart Plug connection for quick removal where appropriate, or use the integrated push terminals for conventional wiring. Confirm vehicle clearance, mounting security, amplifier compatibility, and the intended up-firing or down-firing orientation before installation.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":45614239252550,"sku":"AVBX 10 D4 II","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81NZcuA8DHL.jpg?v=1784363628"},{"product_id":"cerwin-vega-cvp10s4-10-4-ohm-subwoofer","title":"Cerwin-Vega CVP10S4 10\" 4-Ohm Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CVP10S4 is a 10-inch passive car subwoofer designed to add dedicated low-frequency output to an aftermarket vehicle audio system. Its single 4-ohm voice coil provides a straightforward load for a compatible amplifier. It is intended for drivers who want to build or refresh a bass system with a separate subwoofer and enclosure.\u003c\/p\u003e\u003cp\u003eWith 150 watts RMS and 450 watts maximum power handling, the CVP10S4 is suited to amplifier matching based on continuous power rather than peak ratings. Its 87.1 dB sensitivity and 8 mm one-way Xmax support responsive bass performance within its operating limits. The 10-inch format can be a practical option where enclosure space is more limited than a larger subwoofer installation.\u003c\/p\u003e\u003cp\u003eA polypropylene cone and treated foam surround form the moving assembly. The surround uses a dual-stitched connection and ribbed design intended to support cone movement. A structure-reinforcing dust cap is also used as part of the driver assembly.\u003c\/p\u003e\u003cp\u003eThe CVP10S4 uses a ferrite magnet motor, stamped-steel basket, and perimeter-vented voice-coil design. Its bumped backplate is engineered to allow increased excursion, while the venting supports heat dissipation. Large-gauge spring terminals simplify connection of speaker wire during installation.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be used in sealed or ported enclosures, allowing the system design to be tailored to available space and listening goals. A sealed enclosure is commonly selected for a more compact installation, while a ported enclosure changes the system's output character. Confirm enclosure dimensions, amplifier capability, and vehicle clearances before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass without requiring a larger driver format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides simple amplifier and wiring compatibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Handling:\u003c\/strong\u003e Supports appropriate continuous-power amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a light, rigid cone material.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerimeter Voice-Coil Venting:\u003c\/strong\u003e Helps dissipate heat during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStamped-Steel Basket:\u003c\/strong\u003e Provides a stable mounting structure for the driver.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CVP10S4 combines a polypropylene cone, treated foam surround, ferrite magnet, and CAD-optimized stamped-steel basket. Its dual-stitched, ribbed surround and structure-reinforcing dust cap are part of the driver design. The subwoofer uses large-gauge spring terminals for speaker-wire connections.\u003c\/p\u003e\u003cp\u003ePlan for a 236 mm mounting diameter, 253 mm hole diameter, and 134 mm mounting depth when designing the enclosure and checking vehicle clearance. Pair the subwoofer with an external amplifier compatible with a 4-ohm single-voice-coil load and size the amplifier around its 150-watt RMS rating. Use it in a properly designed sealed or ported enclosure; an enclosure and amplifier are required for operation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614308196422,"sku":"CER-CVP10S4","price":86.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61JBvsL4JxL.jpg?v=1784365601"},{"product_id":"cerwin-vega-h6e10dv-dual-10-vented-subwoofer-enclosure","title":"Cerwin-Vega H6E10DV Dual 10\" Vented Subwoofer Enclosure","description":"\u003cp\u003eThe Cerwin-Vega H6E10DV is a loaded passive subwoofer enclosure built around two 10-inch HED Series subwoofers. It gives a car audio system a dedicated low-frequency foundation without requiring the buyer to select an enclosure and separate woofers. The preloaded design is intended for drivers who want a straightforward bass upgrade from a single enclosure.\u003c\/p\u003e\u003cp\u003eThis enclosure is suited to listeners who want more bass presence for daily driving and bass-forward music. Its dual-subwoofer layout provides greater cone area than a single 10-inch enclosure. The finished assembly keeps the system focused on low-frequency reproduction while leaving the main speakers to handle mids and highs.\u003c\/p\u003e\u003cp\u003eThe H6E10DV uses a factory-tuned vented enclosure, a design that uses a port to support efficient low-frequency output. Cerwin-Vega rates the complete enclosure for 500 watts RMS and 2,000 watts maximum power handling. Its final wired impedance is 2 ohms, so amplifier compatibility should be confirmed before installation.\u003c\/p\u003e\u003cp\u003eEach subwoofer uses a polypropylene cone with a treated-foam surround, stamped-steel basket, ferrite magnet, and 2-inch voice coil. The stated frequency response is 20 Hz to 500 Hz. These material choices are paired with a 3\/4-inch MDF enclosure to provide a substantial platform for the loaded drivers.\u003c\/p\u003e\u003cp\u003eThe H6E10DV is a passive enclosure rather than a powered subwoofer, so it requires a separate external car amplifier and appropriate wiring. It can be used with an aftermarket receiver or a factory-audio integration setup that provides a suitable amplifier signal path. With its 30-inch length, check available cargo-area space before purchasing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Drivers:\u003c\/strong\u003e Two HED Series subwoofers are preinstalled in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports substantial continuous amplifier power when properly matched.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Final Impedance:\u003c\/strong\u003e Designed for an amplifier stable at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented MDF Enclosure:\u003c\/strong\u003e Factory-tuned ported construction supports efficient bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cones:\u003c\/strong\u003e Durable cone material paired with treated-foam surrounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtective Grille:\u003c\/strong\u003e Includes a grille to help protect the subwoofer area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe enclosure uses 3\/4-inch medium-density fiberboard with a black carpet exterior. It has a rectangular form factor, factory-embroidered Cerwin-Vega Mobile branding, and a protective grille. The internal subwoofers use stamped-steel baskets and ferrite ceramic magnets.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in the vehicle cargo area so it cannot move during driving or high-output playback. Connect its single binding-post terminal to a compatible external amplifier, and verify that the amplifier is stable at the enclosure's 2-ohm final impedance. Measure the planned location against the 30-inch long by 13-inch high by 13-inch wide enclosure dimensions before installation.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45614397456454,"sku":"CER-H6E10DV","price":270.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UXcFiip7L.jpg?v=1784367567"},{"product_id":"cerwin-vega-cer-hs10dv4-10-shallow-dvc-subwoofer","title":"Cerwin Vega CER-HS10DV4 10\" Shallow DVC Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega CER-HS10DV4 is a 10-inch shallow-mount car subwoofer designed to add low-frequency output where installation depth is limited. Its compact profile makes it suitable for shallow truck boxes, under-seat enclosures, and space-conscious trunk installations. Dual 4-ohm voice coils provide wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eThis HED Slim Series subwoofer is intended for listeners who want a dedicated bass upgrade without committing to a deep enclosure. Its 350-watt RMS power rating supports use in a properly matched amplified subwoofer system. The 10-inch format balances compact enclosure compatibility with meaningful bass reinforcement.\u003c\/p\u003e\u003cp\u003eThe CER-HS10DV4 uses a hybrid polypropylene and treated-paper cone structure to support controlled cone movement. Its treated foam surround is designed to allow excursion while supporting the cone assembly. With an 8 mm Xmax specification, it is engineered for low-frequency duty rather than full-range speaker use.\u003c\/p\u003e\u003cp\u003eA ferrite motor structure and stamped-steel basket provide the foundation for the driver assembly. The 2.5-inch voice coils are configured as a dual-voice-coil design, enabling series or parallel wiring options. This makes the subwoofer adaptable to amplifiers designed for either a 2-ohm or 8-ohm final load from one driver.\u003c\/p\u003e\u003cp\u003eThe CER-HS10DV4 can be incorporated into sealed or ported custom enclosures, depending on the system goal and enclosure design. Its 3.74-inch mounting depth helps address installations with limited clearance behind the mounting surface. Pair it with a compatible mono or multi-channel amplifier used within the subwoofer's RMS power capability.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount 10-Inch Design:\u003c\/strong\u003e Fits installations where conventional subwoofer depth is limited.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports flexible series or parallel amplifier wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Accommodates a properly matched amplified bass system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Combines polypropylene and treated paper in the cone assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated Foam Surround:\u003c\/strong\u003e Supports cone travel for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFerrite Motor Structure:\u003c\/strong\u003e Provides magnetic control for the moving assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe subwoofer uses a stamped-steel basket, ferrite magnet structure, treated foam surround, and 2.5-inch voice coils. Its round 10-inch driver format has a 10.35-inch overall diameter and a 4.33-inch overall height. The shallow 3.74-inch mounting depth is intended to simplify fitment in compact enclosure designs.\u003c\/p\u003e\u003cp\u003eConfirm the enclosure's mounting cutout and rear clearance before installation, and use an enclosure designed for a 10-inch shallow subwoofer. The dual 4-ohm coils may be wired in parallel for a 2-ohm final load or in series for an 8-ohm final load; amplifier stability must match the selected load. Use a compatible amplifier and set gain conservatively to keep operation aligned with the 350-watt RMS rating.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45615681437766,"sku":"CER-HS10DV4","price":176.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61K_MYTfzdL.jpg?v=1784368342"},{"product_id":"cerwin-vega-v10dv2-10-dual-2-ohm-voice-coil-subwoofer","title":"Cerwin-Vega V10DV2 10\" Dual 2-Ohm Voice Coil Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega V10DV2 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to an upgraded vehicle sound system. Its dual 2-ohm voice coil configuration provides wiring flexibility for compatible mono or multi-channel amplifiers. It is intended for listeners building a bass-focused system rather than relying on factory full-range speakers for low-end reproduction.\u003c\/p\u003e\u003cp\u003eWith a 1,000-watt RMS power rating and 3,000-watt maximum rating, the V10DV2 is built for systems using substantial amplifier power. Its 85 dB sensitivity and 45 Hz free-air resonance describe a subwoofer engineered around controlled bass reproduction in an appropriately designed enclosure. Proper gain setting and amplifier load compatibility remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe V10DV2 uses a hybrid carbon fiber and polypropylene cone with a stitch-reinforced Santoprene surround. This combination is designed to keep the moving assembly stable while accommodating bass excursion. A ferrite motor structure supplies the magnetic drive behind the woofer.\u003c\/p\u003e\u003cp\u003eA vented pole piece supports heat management during extended playback, while the 3-inch voice coil is sized for high-power use. The subwoofer also uses a single terminal impedance selector to simplify connection of its dual voice coils. When wired in parallel, its dual 2-ohm coils present a 1-ohm load; series wiring presents a 4-ohm load.\u003c\/p\u003e\u003cp\u003eThis subwoofer fits custom sealed or ported car audio builds when the enclosure and amplifier are selected for the vehicle and desired output. Its 5.94-inch mounting depth and 9.17-inch cutout requirement should be checked before installation. It can serve as a single-subwoofer upgrade or as part of a multi-subwoofer system with appropriate impedance planning.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Supports 1-ohm parallel or 4-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Handling:\u003c\/strong\u003e Accommodates high-power amplification when configured and tuned correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHybrid Cone Construction:\u003c\/strong\u003e Carbon fiber and polypropylene construction supports stable cone movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSantoprene Surround:\u003c\/strong\u003e Stitch-reinforced surround supports excursion and long-term durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Pole Piece:\u003c\/strong\u003e Helps manage heat during extended high-output playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle Terminal Selector:\u003c\/strong\u003e Simplifies access to the dual-voice-coil wiring configuration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe V10DV2 combines a cast aluminum basket, ferrite magnet structure, polypropylene-based cone construction, and Santoprene surround. Its 3-inch voice coil, vented pole piece, and concealed mounting gasket are part of a design focused on high-power car audio use. The overall diameter is 10.89 inches, with an overall height of 6.69 inches.\u003c\/p\u003e\u003cp\u003eConfirm available mounting space before cutting, using the 9.17-inch cutout diameter and 5.94-inch mounting-depth requirements. Both voice coils must be connected to an amplifier, and the amplifier must be stable at the final wired impedance. Use a properly designed subwoofer enclosure and set amplifier gain conservatively to avoid speaker damage.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45617028333638,"sku":"CER-V10DV2","price":293.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71kJ1wVBhfL.jpg?v=1784369048"},{"product_id":"cerwin-vega-cer-vmax10d4-10-dvc-car-subwoofer","title":"Cerwin-Vega CER-VMAX10D4 10\" DVC Car Subwoofer","description":"\u003cp\u003eThe Cerwin-Vega VMAX10D4 is a 10-inch dual-voice-coil car subwoofer for adding dedicated low-frequency output to a vehicle audio system. It is a passive driver, so it is intended for use with a separate compatible amplifier and subwoofer enclosure. Its dual 4-ohm coils provide wiring flexibility for system planning.\u003c\/p\u003e\u003cp\u003eWith an 800-watt RMS power rating and 1,600-watt maximum rating, this subwoofer is designed for systems that need substantial bass capacity from a 10-inch driver. The 15 mm Xmax specification supports meaningful cone travel for low-frequency reproduction. Its 84.4 dB sensitivity and 36.9 Hz free-air resonance are useful reference points when matching the driver and enclosure to the desired response.\u003c\/p\u003e\u003cp\u003eThe VMAX10D4 uses a treated semi-pressed pulped-paper cone, treated-foam surround, and oversized spider. These components support controlled movement while the motor system is engineered for high-excursion operation. A shorting ring and Klippel DA optimized motor and suspension symmetry are included to support lower distortion and consistent operation.\u003c\/p\u003e\u003cp\u003eIts cast-aluminum basket provides a rigid foundation for the driver assembly, while the elevated motor structure is designed to aid cooling. The black-coated voice coil is intended to improve thermal capability during higher-power use. Oversized polished black-chrome terminals provide connection points for the two voice coils.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be installed in either a sealed or ported enclosure according to the manufacturer’s enclosure guidance. A sealed design is suited to a compact, controlled-bass system, while the recommended ported design provides a larger enclosure option with a slot port. It is a practical choice for a custom car-audio bass upgrade when amplifier impedance, enclosure volume, and vehicle space are planned together.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W RMS Handling:\u003c\/strong\u003e Supports higher-output bass systems when paired with an appropriately rated amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows 2-ohm parallel or 8-ohm series wiring configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e15 mm Xmax:\u003c\/strong\u003e Provides capacity for extended cone movement at low frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Basket:\u003c\/strong\u003e Adds a rigid platform for the moving assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShorting Ring:\u003c\/strong\u003e Helps reduce distortion from the motor system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevated Motor Cooling:\u003c\/strong\u003e Supports heat management during demanding operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VMAX10D4 combines a treated paper cone, treated-foam surround, oversized spider, and heavy-duty cast-aluminum frame. Its ferrite motor uses a polished bumped backplate, black-coated voice coil, and elevated cooling-oriented structure. The 10-inch driver has an 11.06-inch overall diameter and a 6.89-inch magnet diameter.\u003c\/p\u003e\u003cp\u003eConfirm a 9.47-inch mounting cutout and at least 5.39 inches of mounting depth before installation. The manufacturer recommends a 1.0 cu. ft. net sealed enclosure or a 1.25 cu. ft. net ported enclosure, both calculated with 3\/4-inch MDF. Match the amplifier to the final 2-ohm or 8-ohm coil wiring load, and use a subsonic filter of at least 30 Hz with the recommended vented enclosure.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45619256819782,"sku":"CER-VMAX10D4","price":259.18,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/618l0D8BB2L.jpg?v=1784370288"},{"product_id":"cerwin-vega-vpas10v2-10-low-profile-powered-subwoofer","title":"Cerwin Vega VPAS10V2 10\" Low-Profile Powered Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VPAS10V2 is a compact 10-inch powered subwoofer designed to add low-frequency support without requiring a separate enclosure and external amplifier. Its low-profile format is intended for locations with limited space, including many under-seat or confined mounting areas. It is a practical upgrade for drivers who want more bass presence from a factory or aftermarket audio system.\u003c\/p\u003e\u003cp\u003eThis active subwoofer combines the woofer, enclosure, and amplifier module in one unit. It supports both RCA low-level and high-level speaker input connections, helping it integrate with a variety of source units. That flexibility makes it suitable for systems with dedicated subwoofer outputs as well as many factory radios without RCA pre-outs.\u003c\/p\u003e\u003cp\u003eThe built-in amplifier is rated at 200 watts RMS and 550 watts maximum. An adjustable low-pass filter helps blend the subwoofer with door or dash speakers, while the selectable phase control can help improve bass integration from the listening position. The adjustable VEGA Bass boost provides additional low-frequency emphasis when used carefully.\u003c\/p\u003e\u003cp\u003eA cast-aluminum enclosure serves as the unit's housing and heat-dissipation structure. The VPAS10V2 also uses a PWM MOSFET power supply and thermal-protection circuitry. Soft delayed remote turn-on is included to support controlled startup with compatible vehicle audio systems.\u003c\/p\u003e\u003cp\u003eThe included remote level knob allows the subwoofer output to be adjusted from an accessible driver location. Its high-level input and auto-power-on capability can simplify installation with compatible OEM systems. For aftermarket systems, the RCA input and remote turn-on connection provide a conventional powered-subwoofer setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Amplifier:\u003c\/strong\u003e Combines amplification and bass reproduction in one enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Provides continuous power for the built-in 10-inch subwoofer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports aftermarket and many factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Helps match bass output to the main speakers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Level Knob:\u003c\/strong\u003e Allows convenient subwoofer-level adjustment from the cabin.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast-Aluminum Enclosure:\u003c\/strong\u003e Provides a compact housing with heat-dissipation capability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VPAS10V2 uses a low-profile rectangular enclosure constructed from cast aluminum. Its integrated amplifier module, 10-inch subwoofer, and enclosure are packaged together to reduce the number of separate components required for a bass upgrade. The unit measures 13.6 inches long, 9.6 inches wide, and 2.6 inches high.\u003c\/p\u003e\u003cp\u003eMount the subwoofer securely in a location with adequate ventilation and verify clearance before installation. Connect it to the vehicle's 12-volt electrical system with a properly fused power connection and solid chassis ground, then use either RCA or high-level audio inputs as appropriate. Set gain, low-pass filter, bass boost, and phase after installation to blend the bass with the rest of the system.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45619602128966,"sku":"CER-VPAS10V2","price":378.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81UpCPbjI9L.jpg?v=1784370540"},{"product_id":"cerwin-vega-vr10-10-powered-underseat-subwoofer","title":"Cerwin Vega VR10 10\" Powered Underseat Subwoofer","description":"\u003cp\u003eThe Cerwin Vega VR10 is a compact 10-inch active subwoofer enclosure made for adding low-frequency reinforcement without dedicating a large portion of the vehicle to a separate subwoofer box and amplifier. Its slim 12.2 x 9.0 x 3.0-inch enclosure is intended for underseat or other tight-space installations. The integrated amplifier creates a self-contained bass upgrade for compatible factory or aftermarket audio systems.\u003c\/p\u003e\u003cp\u003eThis model is designed for drivers who want fuller bass response while maintaining usable cargo and cabin space. It combines a 10-inch, 2-ohm subwoofer with a built-in passive radiator to extend low-frequency performance from its compact enclosure. The result is a focused bass addition suited to everyday music listening rather than a large, externally amplified enclosure installation.\u003c\/p\u003e\u003cp\u003eThe VR10 is rated for 200 watts RMS at 2 ohms and 450 watts maximum power. Its specified frequency response is 35Hz to 150Hz, with an adjustable low-pass filter covering 75Hz to 150Hz. A 0 to 12dB bass boost and 35Hz subsonic filter provide adjustment options for matching the subwoofer to the vehicle and music preferences.\u003c\/p\u003e\u003cp\u003eFor system integration, the VR10 provides both RCA low-level and high-level signal inputs. This allows it to connect with many aftermarket receivers as well as systems that use speaker-level outputs. Adjustable input sensitivity, delayed soft remote turn-on, and thermal-protection circuitry support practical installation and daily operation.\u003c\/p\u003e\u003cp\u003eA wired remote subwoofer control and remote bass knob are included for convenient level adjustment from the front of the vehicle. The amplifier is integrated into a cast-aluminum heat-sink structure, helping manage heat in the compact design. The VR10 can serve as a straightforward standalone bass upgrade without requiring a separate external subwoofer amplifier.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Active Subwoofer:\u003c\/strong\u003e Combines the subwoofer, enclosure, and amplifier in one compact unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Output:\u003c\/strong\u003e Delivers 200 watts RMS at 2 ohms and 100Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-In Passive Radiator:\u003c\/strong\u003e Supports extended bass response from the slim enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports connection to many factory and aftermarket systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets you set the bass blend from 75Hz to 150Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Bass Control:\u003c\/strong\u003e Provides convenient adjustment of subwoofer level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe VR10 uses a slim enclosure format measuring 12.2 x 9.0 x 3.0 inches. Its integrated amplifier is housed with a cast-aluminum heat-sink design, while a built-in passive radiator supports the enclosure's low-frequency performance. PWM MOSFET power-supply design and a thermal-protection circuit are specified for the powered system.\u003c\/p\u003e\u003cp\u003eConfirm available clearance before mounting under a seat or in another compact location, including space for wiring and ventilation. Connect the unit using either its RCA low-level inputs or high-level inputs, then use the adjustable input sensitivity, low-pass filter, bass boost, and included remote level control to blend output with the rest of the audio system. Professional installation is recommended when vehicle power, ground, remote-turn-on, or factory-system integration is required.\u003c\/p\u003e","brand":"Cerwin Vega","offers":[{"title":"Default Title","offer_id":45619997704262,"sku":"CER-VR10","price":432.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/51l3Ko8fHML.jpg?v=1784370747"},{"product_id":"gravity-g3-10d2-10-dual-2-ohm-car-subwoofer","title":"Gravity G3-10D2 10\" Dual 2-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-10D2 is a 10-inch component car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. It is intended for listeners who want more bass authority than factory full-range speakers can provide. Because it is a passive subwoofer driver, it is designed to be used with an external amplifier and a properly built enclosure.\u003c\/p\u003e\u003cp\u003eThis model uses dual 2-ohm voice coils, giving installers wiring flexibility when matching the subwoofer to a compatible mono or multi-channel amplifier. Its 750-watt RMS power rating and 1,500-watt maximum power handling make amplifier selection and gain setup important. The DVC design can support series or parallel wiring arrangements, depending on the amplifier's supported impedance load.\u003c\/p\u003e\u003cp\u003eThe G3-10D2 uses a pressed paper cone and high-roll foam surround. This combination is intended to provide cone support and controlled movement during bass reproduction. It is suited to music systems focused on low-end impact while retaining a conventional 10-inch subwoofer format.\u003c\/p\u003e\u003cp\u003eAn airflow cooling design is specified to help manage heat around the voice-coil assembly during sustained use. The subwoofer also uses a high-flux motor design to support its low-frequency operation. These construction details are aimed at maintaining consistent operation when the driver is installed and powered appropriately.\u003c\/p\u003e\u003cp\u003eThe G3-10D2 can serve as a single-subwoofer bass upgrade or as part of a multi-subwoofer system. Final performance depends on enclosure design, amplifier capability, electrical-system condition, crossover settings, and correct wiring. Confirm available mounting depth, cutout dimensions, and amplifier load compatibility before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated bass output in a commonly used car-audio size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Allows flexible series or parallel wiring options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750-Watt RMS Rating:\u003c\/strong\u003e Supports sustained power matching with a suitable external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500-Watt Maximum Handling:\u003c\/strong\u003e Indicates the listed short-term maximum power figure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a rigid cone material for bass-driver operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during extended listening sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-10D2 combines a competition-grade pressed paper cone with a high-roll foam surround and high-flux motor design. Its dual voice-coil terminals are intended for flexible system wiring, while the cooling design supports thermal management during use. It is a passive driver rather than a self-powered enclosure.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in an enclosure designed for its application and verify physical fit before cutting or mounting. Use an amplifier that is stable at the final impedance created by the selected voice-coil wiring and set gains conservatively. An enclosure, amplifier, wiring, fuse protection, and installation hardware should be selected separately unless specifically included by the seller.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626030293062,"sku":"G3-10D2","price":152.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81gus_k19kL.jpg?v=1784374426"},{"product_id":"gravity-g3-10d4-10-dual-4-ohm-car-subwoofer","title":"Gravity G3-10D4 10\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Gravity G3-10D4 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. It is intended for listeners building or upgrading a system that needs more bass extension than full-range speakers can provide. Its dual 4-ohm voice-coil layout gives installers useful wiring flexibility when matching the subwoofer to a compatible amplifier.\u003c\/p\u003e\u003cp\u003eWith a rated frequency response of 30-500 Hz, the G3-10D4 is built to cover the bass range while integrating with the rest of a car audio system. Its 750-watt RMS and 1,500-watt peak power ratings provide a clear starting point for amplifier selection and gain setup. Careful power matching remains important for dependable operation and controlled bass performance.\u003c\/p\u003e\u003cp\u003eThe subwoofer uses a competition-grade pressed paper cone paired with a high-roll foam surround. This combination is designed to provide a rigid moving surface and the excursion capability needed for low-frequency reproduction. The foam surround also supports the cone through repeated movement during normal use.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling design helps manage heat around the voice-coil assembly during extended playback. Thermal management is especially relevant in high-output systems, where sustained amplifier power can raise operating temperatures. The G3-10D4 is therefore suited to installations that prioritize a dedicated bass driver with serviceable wiring options.\u003c\/p\u003e\u003cp\u003eThis is a component subwoofer, so it should be installed in a properly selected enclosure and powered by a separate compatible amplifier. It can be used as a single-subwoofer upgrade or as part of a multi-subwoofer system. Enclosure selection, final wiring impedance, amplifier capability, and vehicle space should all be confirmed before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds a dedicated bass driver to a vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Supports series or parallel wiring choices with a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e750-Watt RMS Rating:\u003c\/strong\u003e Provides a continuous-power reference for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,500-Watt Peak Rating:\u003c\/strong\u003e Indicates short-term maximum power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Uses a competition-grade cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during extended high-output playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe G3-10D4 combines a pressed paper cone, high-roll foam surround, dual voice coils, and an airflow-focused cooling design. Its 10-inch format is intended for conventional car-audio subwoofer enclosures. The design is focused on dedicated low-frequency reproduction rather than full-range speaker duty.\u003c\/p\u003e\u003cp\u003eUse an enclosure designed for a 10-inch subwoofer and verify all physical fitment details before cutting or mounting, as manufacturer mounting dimensions were not confirmed. The two 4-ohm voice coils may be wired in parallel for a 2-ohm nominal load or in series for an 8-ohm nominal load. Select an amplifier that is stable at the chosen final impedance, use appropriate wiring, and set gains conservatively to match the subwoofer's 750-watt RMS rating.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45626095763526,"sku":"G3-10D4","price":148.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_7210250e-6103-45b0-aa60-0b9d57c77d61.webp?v=1784374473"},{"product_id":"gravity-gr-10pw-10-dual-4-ohm-car-audio-subwoofer","title":"Gravity GR-10PW 10\" Dual 4-Ohm Car Audio Subwoofer","description":"\u003cp\u003eThe Gravity GR-10PW is a 10-inch car audio subwoofer intended to add dedicated low-frequency output to an aftermarket sound system. It is a passive speaker driver, so it requires a compatible external amplifier and a properly designed enclosure. This makes it suitable for vehicle owners building or refreshing a system that needs bass reinforcement beyond full-range speakers.\u003c\/p\u003e\u003cp\u003eThe GR-10PW is listed with 1000 watts maximum power handling and a dual 4-ohm voice-coil configuration. Dual voice coils provide installation flexibility because final system impedance depends on how the coils are wired. Amplifier selection should therefore be based on the completed wiring load rather than the model name alone.\u003c\/p\u003e\u003cp\u003eIts 10-inch format can suit systems where enclosure space is more limited than with larger subwoofers. A properly matched enclosure and amplifier help the driver operate as part of a balanced system. The final bass character will depend substantially on enclosure design, amplifier settings, vehicle acoustics, and source material.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for custom car-audio installations rather than direct connection to a factory radio's speaker outputs. It can be paired with an aftermarket mono amplifier or another suitable amplified subwoofer channel that is stable at the final impedance. Professional installation is useful when planning power wiring, signal integration, enclosure construction, and tuning.\u003c\/p\u003e\u003cp\u003eThe available product listing confirms the core size, maximum-power, and dual-voice-coil details, but does not provide a full technical data sheet. Important setup details such as mounting dimensions, enclosure volume, sensitivity, and continuous RMS power should be verified before purchase or installation. This approach helps ensure the GR-10PW is matched appropriately to the rest of the audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides a dedicated driver size for custom low-frequency car-audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W Maximum Rating:\u003c\/strong\u003e Indicates the listed maximum power-handling figure for the driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Voice Coils:\u003c\/strong\u003e Supports multiple wiring approaches when system impedance is planned correctly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Coil Rating:\u003c\/strong\u003e Gives installers a starting point for amplifier-load calculations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive Driver Design:\u003c\/strong\u003e Works with an external amplifier rather than containing built-in amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom-System Fit:\u003c\/strong\u003e Can be integrated into an enclosure-based aftermarket bass upgrade.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GR-10PW uses a 10-inch subwoofer-driver format with dual voice coils. Detailed information about its cone material, surround material, basket construction, magnet assembly, cooling design, and voice-coil dimensions is not confirmed in the available product listing. Verify those construction details with the seller before making enclosure or power-system decisions based on them.\u003c\/p\u003e\u003cp\u003eInstall the GR-10PW in an enclosure designed for the driver after confirming its required cutout, mounting depth, and enclosure recommendations. Wire both voice coils according to the target final impedance and use an amplifier rated to operate safely at that load. Because the listing does not confirm continuous RMS power or recommended enclosure specifications, confirm those details before selecting amplifier output or building a box.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45627069923398,"sku":"GR-10PW","price":104.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/a_e53bf157-48c0-41d9-b586-a9fd770fdb9e.jpg?v=1784375160"},{"product_id":"gravity-gw-10d2-10-dual-voice-coil-car-subwoofer","title":"Gravity GW-10D2 10\" Dual Voice Coil Car Subwoofer","description":"\u003cp\u003eThe Gravity GW-10D2 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. It is intended for listeners building a bass-focused upgrade rather than relying on full-range speakers alone. With a published 1,000-watt RMS rating and 2,000-watt peak rating, it is suited to systems with appropriately matched external amplification.\u003c\/p\u003e\u003cp\u003eThis subwoofer uses a dual voice coil configuration, giving installers wiring flexibility when matching the speaker to a compatible mono amplifier. The available product information identifies the coils as 4 ohms each. Final system impedance depends on whether the coils are wired in series or parallel and should be confirmed against the amplifier's supported load.\u003c\/p\u003e\u003cp\u003eThe GW-10D2 uses a pressed paper cone with a high-roll foam surround. This combination is designed to support cone movement while maintaining the durable construction needed for mobile-audio use. Its listed frequency response of 30 Hz to 500 Hz covers the low-bass and upper-bass range normally assigned to a subwoofer.\u003c\/p\u003e\u003cp\u003eAn airflow cooling design is listed to help manage heat during extended operation. Thermal management is especially important when a subwoofer is used near its continuous power rating. Proper gain setting and a clean amplifier signal remain important for reliable operation.\u003c\/p\u003e\u003cp\u003eThe GW-10D2 can serve as the bass foundation of a single-subwoofer system or as part of a multi-subwoofer installation. It requires a suitable enclosure, amplifier, wiring, and installation hardware, which are not identified as included. Choose an enclosure and amplifier configuration based on the vehicle, available space, and the final impedance created by the voice-coil wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Provides dedicated low-frequency reproduction for an aftermarket car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1,000W RMS Rating:\u003c\/strong\u003e Supports continuous-power system designs with a properly matched amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2,000W Peak Rating:\u003c\/strong\u003e Indicates short-duration maximum power handling as published.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows series or parallel wiring options for compatible amplifier loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Forms the primary moving surface for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during sustained playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GW-10D2 combines a competition-grade pressed paper cone with a high-roll foam surround. Its design also includes an airflow cooling system intended to support operation during demanding listening sessions. The published sensitivity is 87 dB, and the stated frequency response is 30 Hz to 500 Hz.\u003c\/p\u003e\u003cp\u003eInstall the subwoofer in an enclosure designed for the driver and securely mount it in the vehicle. Use an external amplifier whose power and minimum stable impedance are appropriate for the final dual-voice-coil wiring configuration. An enclosure, amplifier, wiring, and mounting hardware are required for a complete installation and are not listed as included.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45629378428998,"sku":"GW10D2","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_bdf61b75-b2a7-4039-b128-bb8eff9edcb0.webp?v=1784376589"},{"product_id":"gravity-gw-10d4-10-dual-4-ohm-car-audio-subwoofer","title":"Gravity GW-10D4 10\" Dual 4-Ohm Car Audio Subwoofer","description":"\u003cp\u003eThe Gravity GW-10D4 is a 10-inch component car-audio subwoofer designed to add dedicated low-frequency output to a vehicle sound system. It is intended for listeners building or upgrading a system that needs bass reproduction beyond what smaller full-range speakers typically provide. Its single-subwoofer format makes it suitable for custom enclosure projects and systems where space is limited.\u003c\/p\u003e\u003cp\u003eThis model uses a dual 4-ohm voice-coil configuration, giving an installer wiring flexibility when matching the subwoofer to a compatible amplifier. The rated continuous power handling is 1000 watts RMS, with a 2000-watt peak rating. Careful amplifier selection and gain setting are important for using its power capability appropriately.\u003c\/p\u003e\u003cp\u003eThe GW-10D4 is specified for a 30 Hz to 500 Hz frequency-response range and an 87 dB sensitivity rating. Its performance focus is on the lower registers that provide weight and impact in music. A properly configured subwoofer enclosure, crossover, and amplifier setup will determine how it integrates with the rest of the vehicle audio system.\u003c\/p\u003e\u003cp\u003eGravity builds the GW-10D4 around a competition-grade pressed paper cone and a high-roll foam surround. This material combination is designed to support controlled cone movement while providing durability in a high-output subwoofer application. The subwoofer also uses a high-flux motor structure to support its bass-focused design.\u003c\/p\u003e\u003cp\u003eAn advanced airflow cooling design is part of the GW-10D4 construction. This feature is intended to help manage heat during sustained playback. The result is a component subwoofer suited to enthusiasts who want to add a dedicated bass driver to a compatible amplified car-audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Compact bass-driver size for custom vehicle audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000W RMS Rating:\u003c\/strong\u003e Supports sustained power handling in properly matched systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2000W Peak Rating:\u003c\/strong\u003e Indicates short-duration maximum power-handling capability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressed Paper Cone:\u003c\/strong\u003e Competition-grade cone material supports bass-focused performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirflow Cooling Design:\u003c\/strong\u003e Helps manage heat during extended operation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe GW-10D4 combines a pressed paper cone, high-roll foam surround, high-flux motor, and airflow cooling design. These elements are intended for a durable, bass-oriented component subwoofer build. The 10-inch driver format is designed for installation in a separate, compatible enclosure rather than as a self-powered speaker system.\u003c\/p\u003e\u003cp\u003eUse this subwoofer with an external amplifier that is compatible with its dual 4-ohm voice-coil configuration and power ratings. The final load presented to the amplifier depends on how the voice coils are wired, so wiring should be planned around the amplifier's supported impedance range. Confirm enclosure dimensions, mounting requirements, and system crossover settings before installation, as mounting depth and cutout specifications were not confirmed.\u003c\/p\u003e","brand":"Gravity","offers":[{"title":"Default Title","offer_id":45629509009478,"sku":"GW10D4","price":200.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/1_987b1ae2-dff8-4c89-8520-67764fa83134.webp?v=1784376648"},{"product_id":"hertz-cs-250-s2-10-2-ohm-component-subwoofer","title":"Hertz CS 250 S2 10\" 2-Ohm Component Subwoofer","description":"\u003cp\u003eThe Hertz CS 250 S2 is a 10-inch component car subwoofer designed to add low-frequency output to a custom vehicle audio system. Its single 2-ohm voice coil configuration is intended for use with an external subwoofer amplifier. The driver is engineered for installations where enclosure space is limited.\u003c\/p\u003e\u003cp\u003eIt is a practical choice for listeners building a compact bass upgrade in a trunk, cargo area, or under-seat-style custom enclosure where fitment allows. Hertz specifies enclosure designs beginning at 16 liters for this model. That compact-box focus helps simplify integration into systems that cannot accommodate a large subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eThe CS 250 S2 handles 300 watts continuous power and 600 watts peak power. Its 2-ohm nominal impedance can be matched with an amplifier that is stable at 2 ohms. The 84 dB SPL sensitivity and 30 Hz resonance frequency provide useful design information when selecting amplification and enclosure parameters.\u003c\/p\u003e\u003cp\u003eHertz uses a polypropylene cone and a shaped dust cap developed through FEM simulation to help reduce low-frequency distortion. The 35 mm voice coil uses six layers of pure copper wire on a high-thermal-resistance glass-fiber support. Its magnetic-group geometry and airflow-focused design are intended to support controlled operation at higher excursion levels.\u003c\/p\u003e\u003cp\u003eThis subwoofer fits naturally into a system with a dedicated mono amplifier, low-pass filtering, and a properly built sealed enclosure. The manufacturer publishes a 16-liter sealed-box design with a 231 mm mounting hole. Solid push terminals accept speaker cable up to 8 AWG for straightforward connection in single- or multi-subwoofer installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Continuous Power:\u003c\/strong\u003e Supports amplifier matching around its 300-watt RMS rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 2-Ohm Voice Coil:\u003c\/strong\u003e Provides a 2-ohm nominal load for compatible amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed-Box Design:\u003c\/strong\u003e Optimized for sealed enclosures starting at 16 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a durable cone material for low-frequency reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Layer Copper Voice Coil:\u003c\/strong\u003e Helps manage thermal demands during sustained operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 AWG Push Terminals:\u003c\/strong\u003e Accepts substantial speaker wire for secure amplifier connections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS 250 S2 combines a polypropylene cone with a high-density-flux ferrite magnet and rubber protection around the magnetic assembly. Its 35 mm voice coil is wound on a glass-fiber support, while the high-strength ABS gasket is designed to accommodate the optional grille. The driver has a 270 mm overall diameter and a 115 mm mounting depth.\u003c\/p\u003e\u003cp\u003ePlan for a 231 mm mounting cutout and at least 115 mm of mounting-depth clearance behind the mounting surface. Hertz publishes a 16-liter sealed enclosure with 19 mm wood, 385 x 385 x 180 mm external dimensions, and damping material on the rear panel. Match it to an amplifier rated for a 2-ohm load, and use the published 15 Hz subsonic and 70-80 Hz low-pass filter guidance for that sealed-box design.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631722094662,"sku":"CS250S2","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71a70dsw9vL.jpg?v=1784379396"},{"product_id":"hertz-cs-250-s4-10-4-ohm-car-subwoofer","title":"Hertz CS 250 S4 10\" 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Hertz CS 250 S4 is a 10-inch passive car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. It uses a single 4-ohm voice coil and handles up to 300 watts RMS continuous power. This makes it a suitable choice for systems that need bass reinforcement without requiring an unusually large enclosure.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners building or upgrading a car audio system with a compatible external amplifier. Its 4-ohm configuration works with amplifiers designed to drive a 4-ohm subwoofer load. The CS 250 S4 can also be used in multi-subwoofer installations when the amplifier and final wiring load are properly matched.\u003c\/p\u003e\u003cp\u003eHertz specifies 300 watts continuous power handling, 600 watts peak power handling, and 84 dB sensitivity. The driver has a 30 Hz free-air resonance frequency and 12.5 mm of Xmax. These characteristics support low-frequency reproduction in a properly designed enclosure.\u003c\/p\u003e\u003cp\u003eThe CS 250 S4 uses a polypropylene cone and a high-density flux ferrite magnet assembly. Its 35 mm voice coil is wound in six layers of pure copper on a high-temperature glass-fiber former. Hertz also uses fluid-dynamic optimization and FEM-developed cone and dust-cap geometry intended to reduce distortion during higher-excursion operation.\u003c\/p\u003e\u003cp\u003eFor enclosure design, Hertz provides a sealed-box recommendation starting at 16 liters (0.57 cubic feet). The specified compact sealed enclosure uses a 231 mm mounting hole and 19 mm wood. Solid push terminals accept cable up to 8 AWG, helping simplify wiring in single- or multi-subwoofer systems.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 W RMS Handling:\u003c\/strong\u003e Supports amplifier matching around its 300-watt continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Single Voice Coil:\u003c\/strong\u003e Provides a straightforward load for compatible mono or bridged amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Driver:\u003c\/strong\u003e Adds dedicated bass output while fitting a compact sealed enclosure design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Uses a durable cone material engineered for low-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12.5 mm Xmax:\u003c\/strong\u003e Provides linear excursion capability for bass reproduction at higher output levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 AWG Push Terminals:\u003c\/strong\u003e Accepts substantial speaker cable without separate terminal hardware.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CS 250 S4 combines a polypropylene cone with a high-density flux ferrite magnet, a six-layer pure-copper voice coil, and a high-temperature glass-fiber coil former. Its magnetic assembly includes rubber protection, while the mounting gasket is made from high-strength ABS plastic. An optional Hertz CG 250 metal-mesh grille can be fitted for driver protection and finishing.\u003c\/p\u003e\u003cp\u003ePlan for a 231 mm (9.09-inch) mounting cutout and 115 mm (4.53-inch) mounting depth, while allowing additional clearance for the overall driver depth. Hertz provides a sealed enclosure design of 16 liters (0.57 cubic feet), with 19 mm (0.75-inch) wood and external dimensions of 385 x 385 x 180 mm. Use an amplifier compatible with a 4-ohm load, set gain appropriately for the subwoofer's 300-watt RMS rating, and follow the recommended crossover settings for the selected enclosure.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631722127430,"sku":"CS250S4","price":279.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71a70dsw9vL_e34706c8-e793-4081-875b-45d49c446fdd.jpg?v=1784379458"},{"product_id":"hertz-dbx25-3-10-car-subwoofer-enclosure","title":"Hertz DBX25-3 10\" Car Subwoofer Enclosure","description":"\u003cp\u003eThe Hertz DBX25-3 is a complete 10-inch car subwoofer enclosure designed to add low-frequency output to an existing vehicle audio system. It provides a practical way to introduce bass without designing and building a separate enclosure. The 4-ohm passive configuration is intended for connection to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis subwoofer box is suited to listeners who want fuller bass response from factory or aftermarket speakers while keeping the installation relatively contained. Its 32-400 Hz frequency-response specification supports use as the low-frequency portion of a multi-speaker car audio system. With 150 W continuous power handling and 600 W peak power handling, it should be matched carefully with an amplifier and correctly configured crossover.\u003c\/p\u003e\u003cp\u003eThe DBX25-3 uses a 250 mm (10-inch) subwoofer with a polypropylene cone reinforced with mica injection. Its high-excursion butyl rubber surround and ribbed cone surface support controlled cone movement and rigidity. The result is a bass-focused driver built for integration in a dedicated enclosure.\u003c\/p\u003e\u003cp\u003eA high-density-flux ferrite magnet and 38 mm voice coil are part of the driver design. The enclosure uses a very thick MDF cabinet to provide a rigid mounting structure for the subwoofer. Its angled rear wall is designed to reduce rear-wave reflections while helping the enclosure fit more easily in vehicle cargo areas.\u003c\/p\u003e\u003cp\u003eThe DBX25-3 can serve as a compact bass upgrade alongside full-range door speakers, component speakers, or an aftermarket head unit. Its plated high-current terminals provide the connection point for speaker wire from the amplifier. Secure mounting, sensible gain adjustment, and a low-pass crossover are important for reliable system integration.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated low-frequency output to a vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Connects to an amplifier rated for a 4-ohm speaker load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 W Continuous Handling:\u003c\/strong\u003e Supports amplifier matching for sustained playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Mica Cone:\u003c\/strong\u003e Uses a stiffened cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick MDF Enclosure:\u003c\/strong\u003e Provides a rigid cabinet structure for the installed driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAngled Rear Panel:\u003c\/strong\u003e Helps placement while reducing rear-wave reflections.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DBX25-3 combines a polypropylene cone with mica injection, a high-excursion butyl rubber surround, and a high-density-flux ferrite magnet. Its enclosure is constructed from thick MDF and uses an angled rear panel. The cabinet includes plated high-current terminals for the speaker-level connection from an external amplifier.\u003c\/p\u003e\u003cp\u003eInstall the enclosure in a secure location where it cannot shift during driving and where it does not interfere with vehicle equipment. Connect it only to an amplifier that is stable at 4 ohms, then set amplifier gain and low-pass filtering appropriately for the rest of the system. Use appropriately sized, protected speaker cable and keep wiring clear of sharp edges, moving parts, moisture, and heat sources.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631724159046,"sku":"DBX25-3","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81b9Frkm3qL.jpg?v=1784379782"},{"product_id":"hertz-ds25-3-10-4-ohm-car-audio-subwoofer","title":"Hertz DS25-3 10\" 4-Ohm Car Audio Subwoofer","description":"\u003cp\u003eThe Hertz DS25-3 is a 10-inch, 4-ohm car audio subwoofer from the Dieci series designed to add dedicated low-frequency output to an aftermarket sound system. It is intended for listeners who want stronger bass response than factory full-range speakers can provide. Its 250 mm driver size makes it suitable for many compact subwoofer enclosure installations.\u003c\/p\u003e\u003cp\u003eThis subwoofer uses a polypropylene cone with mica injection and a high-excursion butyl rubber surround. The cone includes deep surface ribbing to increase rigidity, while the surround supports controlled driver movement. Together, these construction choices are designed for low-frequency reproduction in a car audio environment.\u003c\/p\u003e\u003cp\u003eThe DS25-3 is rated by Hertz for 150 watts continuous\/program power handling and 600 watts peak power handling at 4 ohms. Its 89 dB sensitivity and 32-400 Hz frequency-response specification support use as a dedicated bass driver. A 38 mm copper voice coil on an aluminum former helps manage thermal and mechanical demands during operation.\u003c\/p\u003e\u003cp\u003eA high-density ferrite magnet and venting system are used in the motor structure. The venting design is intended to improve heat dissipation and help maintain consistent performance. Hertz specifies 9 mm Xmax and 16 mm maximum mechanical excursion for the driver.\u003c\/p\u003e\u003cp\u003eThe DS25-3 is designed for compact sealed or reflex enclosure applications, making it a flexible option for a custom trunk, hatch, or cargo-area bass upgrade. Hertz publishes enclosure data for both 15.3-liter sealed and 18-liter reflex designs. Pair it with a compatible 4-ohm subwoofer amplifier and a properly designed enclosure for a complete low-frequency system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Works with amplifiers stable at a 4-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W Continuous\/Program Rating:\u003c\/strong\u003e Supports appropriately matched external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMica-Injected Polypropylene Cone:\u003c\/strong\u003e Provides a rigid, purpose-built bass diaphragm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButyl Rubber Surround:\u003c\/strong\u003e Supports high-excursion driver movement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Enclosure Compatibility:\u003c\/strong\u003e Designed for sealed or reflex box applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe DS25-3 combines a high-density flux ferrite magnet with a 38 mm pure-copper voice coil wound on an aluminum former. Its polypropylene cone is reinforced with mineral powder and uses deep ribbing for added rigidity. The butyl rubber surround and vented motor system complete a design focused on controlled excursion and heat management.\u003c\/p\u003e\u003cp\u003ePlan the installation around the 234 mm mounting-hole diameter and 116 mm mounting depth, while allowing clearance for the rear magnet structure and wiring. Hertz provides sealed and reflex enclosure data, so the driver should be mounted in a properly built enclosure rather than used without one. An external amplifier, subwoofer wiring, enclosure, and installation hardware are required for operation; the optional Hertz DSG 250.3 grille can be added for driver protection.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631729139782,"sku":"DS25-3","price":129.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71UXmB3rHfL.jpg?v=1784380428"},{"product_id":"hertz-hms-10-s2-ld-g-10-2-ohm-marine-subwoofer","title":"Hertz HMS 10 S2-LD-G 10\" 2-Ohm Marine Subwoofer","description":"\u003cp\u003eThe Hertz HMS 10 S2-LD-G is a 10-inch, 2-ohm marine subwoofer made to add dedicated low-frequency output to boat and marine audio systems. Its gray sport grille incorporates RGB LED lighting for a coordinated illuminated installation. The subwoofer is designed for installations where a dedicated enclosure is not practical, helping bring fuller bass response to open-air marine environments.\u003c\/p\u003e\u003cp\u003eThis model is suited to boat owners building or upgrading a marine sound system with a compatible 2-ohm amplifier channel. With 300 watts continuous power handling and 600 watts peak power handling, it is intended for systems that need more low-end capacity than full-range speakers can provide alone. Adding a subwoofer also lets the main speakers focus on midrange and high-frequency reproduction.\u003c\/p\u003e\u003cp\u003eThe HMS 10 S2-LD-G uses a long-throw 50 mm voice coil, high-density-flux ferrite magnet, and high-excursion moving assembly. Its 12.3 mm Xmax and ±16.3 mm mechanical excursion are designed to support controlled cone travel. The polypropylene cone with UV inhibitors and co-molded Santoprene surround are selected for marine exposure and sustained operation.\u003c\/p\u003e\u003cp\u003eMarine-focused construction includes a polymer-injected basket, aramid-fiber spider, silicone-insulated lead wires, and gold-plated corrosion-resistant brass terminals. A silicone cap protects the lead-wire junction point. Hertz rates the model IP65 and identifies UV-resistance testing to ASTM-D4329 and salt-fog operability testing to ASTM-B117.\u003c\/p\u003e\u003cp\u003eThe sound-transparent gray sport grille is removable and can be painted to suit a vessel's finish. Integrated RGB lighting can be used with the optional Hertz HM RGB 1 BK controller. For system design flexibility, Hertz engineers this subwoofer for infinite-baffle use and also publishes compact and performance sealed-box configurations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a marine audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Single Voice Coil:\u003c\/strong\u003e Matches amplifiers designed for a 2-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W Continuous Power:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated RGB LEDs:\u003c\/strong\u003e Adds configurable illumination with the optional HM RGB 1 BK.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 Marine Protection:\u003c\/strong\u003e Built for water-jet, UV, and salt-fog exposure requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInfinite-Baffle Design:\u003c\/strong\u003e Enables installation without a dedicated subwoofer enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe HMS 10 S2-LD-G combines a UV-inhibited polypropylene cone, co-molded Santoprene surround, aramid-fiber spider, ferrite magnetic assembly, and marine-grade polymer basket. Its gray polymer sport grille is sound-transparent, removable, and paintable. Gold-plated brass terminals and a silicone protective cap address connection-point durability in marine installations.\u003c\/p\u003e\u003cp\u003eVerify the 2-ohm amplifier compatibility, available mounting space, and mounting-hole requirements before installation. Hertz lists a 230 mm (9.06-inch) mounting hole for its sealed-box designs and a 116 mm (4.56-inch) product depth. The subwoofer can be used in an infinite-baffle location or in one of Hertz's published sealed enclosure alignments; RGB lighting requires the separately available HM RGB 1 BK controller.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631744966726,"sku":"HMS-10-S2-LD-G","price":647.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61zGHbeXWUL.jpg?v=1784381351"},{"product_id":"hertz-mp-250-d2-3-10-dual-2-ohm-subwoofer","title":"Hertz MP 250 D2.3 10\" Dual 2-Ohm Subwoofer","description":"\u003cp\u003eThe Hertz MP 250 D2.3 is a 10-inch Mille Pro Series component subwoofer designed for custom car-audio enclosures. Its dual 2-ohm voice coils provide wiring flexibility for compatible mono or multi-channel amplification. It is intended for listeners building a system that needs substantial low-frequency output without moving to a larger woofer.\u003c\/p\u003e\u003cp\u003eRated for 600 watts continuous power and 1,200 watts peak power, this subwoofer is suited to an appropriately matched external amplifier. The dual 2-ohm configuration can be wired to a 1-ohm parallel load or a 4-ohm series load with one subwoofer. Proper amplifier load capability, gain setting, enclosure construction, and crossover setup remain important to system performance.\u003c\/p\u003e\u003cp\u003eThe pressed-pulp cone incorporates mineral powders to combine rigidity with damping. Hertz uses an exponential V-cone profile intended to help the cone maintain controlled piston-like behavior through its operating range. A Boundary Free IIR rubber surround increases available radiating area while retaining a compact nominal frame diameter.\u003c\/p\u003e\u003cp\u003eThe MP 250 D2.3 uses a 65 mm, four-layer CCAW voice coil and a high-density ferrite motor. Its TIL-P voice-coil former includes venting behind the winding to support heat dissipation. The published electro-acoustic specifications include a 30 Hz resonant frequency, 83.5 dB sensitivity, and ±17 mm Xmax.\u003c\/p\u003e\u003cp\u003eThis driver can be used in a manufacturer-specified 17 L sealed enclosure or a 22 L reflex enclosure. A sealed setup is the more compact option, while the reflex design follows Hertz's specified tuning and port dimensions. It is a component subwoofer, so an enclosure, amplifier, wiring, and installation hardware should be planned as part of the complete system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 W Continuous Power:\u003c\/strong\u003e Supports use with a suitably matched external amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 2-Ohm Voice Coils:\u003c\/strong\u003e Allows 1-ohm parallel or 4-ohm series wiring for one driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMineral-Injected Pulp Cone:\u003c\/strong\u003e Combines a pressed-pulp diaphragm with mineral powders for rigidity and damping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free Surround:\u003c\/strong\u003e IIR rubber surround increases usable emission area within the nominal frame size.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65 mm CCAW Voice Coil:\u003c\/strong\u003e Four-layer coil construction is designed for the published power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Spoke Alloy Basket:\u003c\/strong\u003e Aluminum alloy basket provides a rigid, vented mounting structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 250 D2.3 is built around a high-density flux ferrite magnet, pressed-pulp mineral cone, and Boundary Free IIR rubber surround. Its six-spoke aluminum alloy basket includes venting beneath the spider, while the basket edge has a CNC-machined diamond-cut finish. The terminal block accepts up to 8 AWG speaker cable and includes a protective plastic cover.\u003c\/p\u003e\u003cp\u003eAllow for a 236 mm (9.29 in.) mounting cutout and 141 mm (5.55 in.) mounting depth when designing an enclosure. Hertz specifies a 17 L (0.60 cu. ft.) sealed enclosure or a 22 L (0.78 cu. ft.) reflex enclosure, each using 19 mm (0.75 in.) wood in its published examples. For one subwoofer, wire the coils in parallel only with an amplifier rated for a 1-ohm load, or wire them in series for a 4-ohm load.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631776817222,"sku":"MP250D2-3","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71A6zTH6fdL.jpg?v=1784382529"},{"product_id":"hertz-mp-250-d4-3-10-dual-4-ohm-subwoofer","title":"Hertz MP 250 D4.3 10\" Dual 4-Ohm Subwoofer","description":"\u003cp\u003eThe Hertz MP 250 D4.3 is a 10-inch component subwoofer designed for car audio systems that need substantial low-frequency output without requiring an oversized enclosure. Its dual 4-ohm voice coil configuration gives system designers flexibility when matching the subwoofer to a compatible amplifier. It is intended for custom enclosures and aftermarket bass upgrades rather than factory replacement locations.\u003c\/p\u003e\u003cp\u003eWith 600 watts continuous power handling and 1,200 watts peak power handling, the MP 250 D4.3 is suited to dedicated subwoofer amplification. Its 83.5 dB sensitivity and 27 Hz resonant frequency support a low-frequency-focused system design. The subwoofer uses a 65 mm, four-layer CCAW voice coil to manage sustained power demands.\u003c\/p\u003e\u003cp\u003eThe pressed-pulp cone incorporates mineral powders for rigidity and damping, while the exponential V-cone profile is shaped to resist deformation during high excursion. A Boundary Free IIR rubber surround increases the available radiating area while maintaining the nominal 10-inch format. Together, these elements support controlled cone motion for bass reproduction in sealed or reflex enclosures.\u003c\/p\u003e\u003cp\u003eHertz builds the MP 250 D4.3 around a high-density-flux ferrite motor and a vented TIL-P voice-coil former. Venting behind the winding helps dissipate heat from the coil assembly. The aluminium alloy basket uses a six-spoke structure with venting beneath the spider to support airflow and reduce basket resonance.\u003c\/p\u003e\u003cp\u003eThis subwoofer can be the bass foundation for a Mille Pro-based system or a standalone upgraded subwoofer stage. Hertz specifies sealed-box use starting at 17 liters, with a 22-liter reflex design also provided by the manufacturer. Its compact enclosure recommendations make it appropriate where controlled bass performance and practical box size both matter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e600W Continuous Power:\u003c\/strong\u003e Supports use with a properly matched dedicated subwoofer amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMineral-Injected Pulp Cone:\u003c\/strong\u003e Combines damping characteristics with structural rigidity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoundary Free IIR Surround:\u003c\/strong\u003e Expands effective radiating area within the 10-inch format.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65 mm Four-Layer Voice Coil:\u003c\/strong\u003e Uses CCAW windings for sustained power handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Aluminium Alloy Basket:\u003c\/strong\u003e Supports airflow and a rigid mounting structure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MP 250 D4.3 uses a high-density-flux ferrite magnet, pressed-pulp mineral cone, IIR rubber surround, and anti-resonant aluminium alloy basket. Its basket has six spokes, built-in venting below the spider, and a CNC-machined diamond-cut edge. The terminal block includes a protective plastic cover and accepts speaker cable up to 8 AWG.\u003c\/p\u003e\u003cp\u003ePlan for a 236 mm (9.29-inch) mounting cutout and approximately 141 mm (5.55 inches) of mounting depth behind the mounting surface. Hertz specifies a sealed enclosure starting at 17 liters (0.60 cu. ft.) and also publishes a 22-liter (0.78 cu. ft.) reflex enclosure design. Confirm available enclosure clearance, amplifier stability at the selected voice-coil wiring configuration, and enclosure construction before installation.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631777964102,"sku":"MP250D4-3","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71I6DlOJKuL.jpg?v=1784382579"},{"product_id":"hertz-mpbx-250-s2-10-sealed-loaded-subwoofer-enclosure","title":"Hertz MPBX 250 S2 10\" Sealed Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe Hertz MPBX 250 S2 is a loaded 10-inch passive subwoofer enclosure designed for vehicle systems that need meaningful bass output without requiring a large box. Its sealed, ultra-shallow enclosure format helps it fit where conventional subwoofer enclosures may be impractical. It is built around the 2-ohm MPS 250 S2 shallow subwoofer platform.\u003c\/p\u003e\u003cp\u003eThis enclosure is intended for listeners building a compact amplified subwoofer system in cars, trucks, and other vehicles with limited installation height. With 500 watts continuous power handling and a 2-ohm nominal impedance, it should be paired with an amplifier that is stable at 2 ohms and appropriately power-matched. Its specified frequency response is 25 to 400 Hz.\u003c\/p\u003e\u003cp\u003eThe MPBX 250 S2 uses a sealed cabinet to provide a controlled bass foundation in a compact footprint. Hertz specifies a polypropylene cone, a single 38 mm voice coil, and a high-density flux ferrite magnet in the loaded subwoofer. The shallow enclosure measures 160 mm deep externally, helping accommodate under-seat and other low-clearance applications.\u003c\/p\u003e\u003cp\u003eIts enclosure construction uses 15 mm wood panels, panel-to-panel internal bracing, solid corners, and internal sound-absorbing material. These elements are designed to limit cabinet resonances while supporting the enclosed driver. Rounded cabinet corners also make placement easier in tighter vehicle spaces.\u003c\/p\u003e\u003cp\u003eHertz 2S² (2 Sides\/2 Sounds) design supports either up-firing or down-firing placement. The supplied leveling feet use hook-and-loop inserts for down-firing installation, while the SSP Sub Smart Plug system provides a removable Plug-\u0026amp;-Play terminal block alongside traditional push terminals. A screw-less mesh grille is included to help protect the driver.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltra-Shallow Sealed Enclosure:\u003c\/strong\u003e A 160 mm external depth supports installations with limited available height.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Continuous Handling:\u003c\/strong\u003e Supports amplifier matching for substantial low-frequency system output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Loaded Design:\u003c\/strong\u003e Uses a single 2-ohm shallow 10-inch subwoofer configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2S² Orientation Options:\u003c\/strong\u003e Allows up-firing or down-firing placement to suit the installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced Wood Cabinet:\u003c\/strong\u003e 15 mm wood panels and internal bracing help control enclosure resonance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSP Connection System:\u003c\/strong\u003e Combines a removable Plug-\u0026amp;-Play block with traditional push terminals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPBX 250 S2 combines a polypropylene-cone subwoofer with a high-density flux ferrite magnet in a rigid sealed box. Its cabinet includes 15 mm wood construction, internal sound-absorbing material, panel-to-panel bracing, solid corners, and rounded exterior corners. The included mesh grille has an adjustable logo position for installation orientation.\u003c\/p\u003e\u003cp\u003eMeasure the available space before installation using the 531 x 160 x 361 mm overall dimensions. For down-firing use, install the supplied leveling feet with their hook-and-loop inserts on a suitable carpeted surface; up-firing can be used when that placement better suits the system. Connect the enclosure to a compatible 2-ohm-stable subwoofer amplifier using either the SSP Plug-\u0026amp;-Play terminal block or the conventional push terminals, and secure the enclosure so it cannot move while driving.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631786057798,"sku":"MPBX250S2-1","price":707.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81gf7kAFBPL.jpg?v=1784382818"},{"product_id":"hertz-mpg250-3-10-mille-pro-subwoofer-grille","title":"Hertz MPG250-3 10\" Mille Pro Subwoofer Grille","description":"\u003cp\u003eThe Hertz MPG250-3 is an optional protective grille for compatible 10-inch Mille PRO subwoofers. It provides a finished appearance while helping shield the subwoofer from incidental contact inside a vehicle installation. This is a passive accessory, not a subwoofer or an amplified audio component.\u003c\/p\u003e\u003cp\u003eIt is intended for builders who want to retain visible subwoofer installation while adding front-side protection. The grille is suited to trunk, cargo-area, and custom enclosure applications where the woofer may be exposed. Its 250 mm format matches the size class of compatible Mille PRO subwoofers.\u003c\/p\u003e\u003cp\u003eBecause it is a grille rather than a sound-producing component, it has no power rating, impedance, or wiring requirement. Its role is physical protection and presentation within the system. The open grille format allows it to be used in front of the compatible subwoofer without requiring a separate electrical connection.\u003c\/p\u003e\u003cp\u003eThe MPG250-3 uses die-cast aluminum construction and carries an aluminum Hertz logo with a diamond-cut finish. These details give the accessory a coordinated appearance with Mille PRO equipment while providing a rigid protective structure. The product is specified as an optional Mille PRO subwoofer grille.\u003c\/p\u003e\u003cp\u003eUse the MPG250-3 as part of a Mille PRO 10-inch subwoofer upgrade or enclosure finishing plan. Confirm the subwoofer model and available mounting clearance before ordering, particularly when using a custom enclosure. Hertz documentation identifies this grille as the optional grille for MP 250 D2.3 and MP 250 D4.3 subwoofers.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Format:\u003c\/strong\u003e Designed for the 250 mm subwoofer size class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMille PRO Accessory:\u003c\/strong\u003e Coordinates with Hertz Mille PRO subwoofer installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDie-Cast Aluminum:\u003c\/strong\u003e Provides a rigid, protective grille structure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiamond-Cut Logo:\u003c\/strong\u003e Features an aluminum Hertz logo detail.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Grille:\u003c\/strong\u003e Adds protection to compatible subwoofer installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo Wiring Needed:\u003c\/strong\u003e Installs as a passive physical accessory.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPG250-3 is built as a 250 mm grille with die-cast aluminum construction and an aluminum Hertz badge finished with a diamond-cut treatment. It is designed as an exterior protective accessory for a Mille PRO subwoofer installation. The grille does not add amplification, electrical load, or signal-processing functions.\u003c\/p\u003e\u003cp\u003eInstall it only after confirming fitment with the compatible MP 250 D2.3 or MP 250 D4.3 subwoofer and the enclosure or mounting surface being used. Check that the grille will clear the subwoofer surround and any enclosure trim before fastening it in place. No speaker wiring is required for the grille itself; package contents and mounting hardware should be verified with the selling dealer before installation.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631806341190,"sku":"MPG250-3","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61d1FXCcc3L.jpg?v=1784382939"},{"product_id":"hertz-mps250s2-1-10-2-ohm-shallow-subwoofer","title":"Hertz MPS250S2-1 10\" 2-Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Hertz MPS250S2-1 is a 10-inch shallow-mount car subwoofer designed for systems where enclosure depth is limited. Its compact mounting depth helps make low-frequency upgrades practical in locations such as under-seat and behind-seat installations. It uses a single 2-ohm voice coil for straightforward amplifier matching.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners who want meaningful bass output without dedicating a large amount of vehicle space to a conventional deep enclosure. Hertz specifies it for ultra-compact sealed enclosures starting at 14.2 liters (0.5 cu. ft.). A reflex enclosure design is also provided for installations with more available space.\u003c\/p\u003e\u003cp\u003eWith 500 watts continuous power handling and 1,000 watts peak power handling, the MPS250S2-1 is built for a properly matched external amplifier. Its 25-400 Hz frequency response and 28 Hz free-air resonance support use as the bass foundation in a full-range car audio system. The recommended sealed enclosure alignment is designed for controlled, accurate bass reproduction.\u003c\/p\u003e\u003cp\u003eIts shallow design uses a dedicated suspension structure that moves the magnetic assembly inward while preserving cone travel. The driver has 16.8 mm of Xmax and 20 mm of mechanical excursion, helping it maintain controlled movement in a compact form factor. Hertz also uses its Air Intercooling Revolution design to reduce internal air compression and assist voice-coil cooling.\u003c\/p\u003e\u003cp\u003eThe MPS250S2-1 can be paired with a 2-ohm-stable mono amplifier and an appropriate low-pass crossover for a focused bass upgrade. Its 8 AWG push terminals simplify connection with substantial speaker cable. The included metal grille and compact driver profile make it well suited to visible or space-conscious custom installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Profile:\u003c\/strong\u003e Fits installations with limited enclosure depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W RMS Handling:\u003c\/strong\u003e Supports substantial amplifier power with proper setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 2-Ohm Voice Coil:\u003c\/strong\u003e Enables direct matching to compatible mono amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16.8 mm Xmax:\u003c\/strong\u003e Provides controlled linear cone travel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA.I.R. Cooling Design:\u003c\/strong\u003e Helps reduce air-compression effects inside the motor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Metal Grille:\u003c\/strong\u003e Adds protection and a finished installation appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPS250S2-1 uses a polypropylene cone, high-density-flux ferrite magnet, and a 38 mm six-layer copper voice coil. Its die-cast aluminum construction is paired with a full-metal grille assembly using a cast aluminum ring and black steel mesh. The non-vented rear design helps reduce required enclosure depth.\u003c\/p\u003e\u003cp\u003eConfirm the 231.6 mm mounting cutout and 82.6 mm mounting depth before building or selecting an enclosure. For a sealed installation, Hertz specifies 14.2 liters (0.5 cu. ft.); for its reflex alignment, it specifies 17 liters (0.6 cu. ft.) tuned to 35 Hz. Use an amplifier stable at 2 ohms, set a suitable low-pass filter, and observe the enclosure and wiring requirements for the installation.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631823249478,"sku":"MPS250S2-1","price":575.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71QCOHiV9zL.jpg?v=1784383257"},{"product_id":"hertz-mps250s4-1-10-shallow-4-ohm-subwoofer","title":"HERTZ MPS250S4-1 10\" Shallow 4-Ohm Subwoofer","description":"\u003cp\u003eThe HERTZ MPS250S4-1 is a 10-inch shallow-mount car subwoofer designed for systems where enclosure depth is limited. Its 4-ohm single voice coil configuration and 500-watt continuous power rating make it suitable for a dedicated mono amplifier channel. It is intended for compact subwoofer installations such as under-seat or rear-bench enclosures.\u003c\/p\u003e\u003cp\u003eThis Mille PRO shallow subwoofer is optimized for small sealed enclosures, with a manufacturer-developed sealed design using 14.2 liters (0.5 cu. ft.) of internal volume. That makes it a practical option when a traditional deep subwoofer box will not fit. The design can provide low-frequency support without requiring a large enclosure footprint.\u003c\/p\u003e\u003cp\u003eThe polypropylene cone and high-density flux ferrite magnet are paired with a 38 mm, six-layer copper voice coil. Hertz specifies 1,000 watts peak handling and a 25 Hz to 400 Hz frequency response. Its 83.5 dB sensitivity and 29 Hz resonant frequency help define the driver’s system requirements.\u003c\/p\u003e\u003cp\u003eHertz uses a dedicated spider and voice-coil support structure to move the magnetic assembly inward and preserve cone travel in a shallow format. The MPS250S4-1 has 20 mm of Xmech mechanical excursion and 16.8 mm Xmax. Its Air Intercooling Revolution design is intended to reduce air-compression-related limitations inside compact enclosures.\u003c\/p\u003e\u003cp\u003eThe subwoofer can be used in a sealed or reflex enclosure when built to Hertz’s published designs. A sealed enclosure favors a compact installation, while the published reflex design uses more space and is tuned for stronger output in its intended operating range. Pair it with an amplifier suited to a 4-ohm load and configure crossover settings appropriate for the rest of the vehicle audio system.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Format:\u003c\/strong\u003e 82.6 mm depth supports installations with limited enclosure depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500W Continuous Handling:\u003c\/strong\u003e Supports amplification matched for 500 watts RMS at 4 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a straightforward load for compatible mono amplifiers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Sealed Enclosure:\u003c\/strong\u003e Designed for a 14.2 L \/ 0.5 cu. ft. sealed box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSix-Layer Copper Voice Coil:\u003c\/strong\u003e Supports thermal capacity during sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Mesh Grille:\u003c\/strong\u003e Adds driver protection with a screw-less grille design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe MPS250S4-1 uses a die-cast aluminum frame, polypropylene cone, high-density flux ferrite magnet, and non-vented rear structure. It includes a robust mesh grille with black mounting screws. Horizontal spring-loaded terminals accept up to 8 AWG speaker cable.\u003c\/p\u003e\u003cp\u003eConfirm available mounting depth, enclosure volume, and a 232 mm mounting cutout before installation. Hertz publishes sealed and reflex enclosure designs for this model, both using 16 mm wood; the compact sealed design is the more space-efficient option. Use a compatible 4-ohm amplifier, secure the driver with the specified mounting hardware, and set the low-pass and subsonic filters according to the enclosure type.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631824494662,"sku":"MPS250S4-1","price":575.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71QCOHiV9zL_c45c0924-7436-4109-88c3-7c1672c46e38.jpg?v=1784383308"},{"product_id":"audison-aps-10-s4s-10-4-ohm-shallow-subwoofer-1","title":"Audison APS 10 S4S 10\" 4 Ohm Shallow Subwoofer","description":"\u003cp\u003eThe Audison APS 10 S4S is a 10-inch shallow-mount subwoofer driver designed for compact car-audio bass upgrades. Its single 4-ohm voice coil and 400-watt continuous power rating make it suitable for systems that need controlled low-frequency output without requiring a large enclosure. It is optimized for sealed enclosures beginning at 10 liters, or about 0.35 cubic feet.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for installers and enthusiasts working with limited mounting depth in trunks, custom side panels, under-floor spaces, or other compact locations. The 88 mm mounting depth helps make installation possible where conventional full-depth woofers may not fit. Its compact enclosure requirements also support space-conscious system designs.\u003c\/p\u003e\u003cp\u003eThe APS 10 S4S is built to cover bass frequencies with a specified free-air resonance of 28.5 Hz and an excursion capability rated at 12.6 mm Xmax. Its water-repellent pressed-paper cone is engineered to provide a practical balance of low-frequency response and durability for mobile environments. A 60 mm voice coil and high-density flux ferrite motor support power handling and cone control.\u003c\/p\u003e\u003cp\u003eAudison uses a ventilated basket arrangement beneath the spider, eliminating the need for a center-pole vent. This design helps enable installation close to the rear wall of an enclosure while retaining a shallow overall profile. The cone and dust-cap geometry is also designed to support linear movement while keeping mounting depth low.\u003c\/p\u003e\u003cp\u003eAs a passive subwoofer driver, the APS 10 S4S requires a separate compatible amplifier and a properly built enclosure. It can be used as a single 4-ohm subwoofer, or two units can be wired in parallel for a 2-ohm load when matched with an appropriate amplifier. A steel mesh grille and plastic gasket are included to help protect the driver and finish the installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow Driver:\u003c\/strong\u003e Fits compact custom subwoofer applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400W Continuous Power:\u003c\/strong\u003e Supports properly matched external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides straightforward amplifier load matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed-Enclosure Design:\u003c\/strong\u003e Optimized for enclosures from 10 liters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater-Repellent Paper Cone:\u003c\/strong\u003e Supports durable mobile-audio use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Density Ferrite Motor:\u003c\/strong\u003e Helps control the cone at excursion.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe APS 10 S4S uses a water-repellent pressed-paper cone, a 60 mm voice coil, and a high-density flux ferrite magnet. Its basket includes air venting beneath the spider, while the motor assembly is designed for control under higher-excursion operation. The included steel mesh grille and plastic gasket provide added driver protection and installation finishing hardware.\u003c\/p\u003e\u003cp\u003eInstall this driver in a sealed enclosure with an internal volume of at least 10 liters (approximately 0.35 cubic feet). Confirm the available mounting depth of 88 mm and the listed driver dimensions before cutting a mounting opening. Use an amplifier designed to operate safely with a 4-ohm speaker load, observe correct polarity, and ensure the enclosure is rigid and airtight for intended performance.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":45631859589190,"sku":"ST35KNEO","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Exi-yjeZL_355a8d8c-08c4-4bfe-adf9-e3544bd59a89.jpg?v=1784384229"},{"product_id":"hifonics-brw10d4-10-dual-4-ohm-car-subwoofer","title":"Hifonics BRW10D4 10\" Dual 4-Ohm Car Subwoofer","description":"\u003cp\u003eThe Hifonics BRW10D4 is a 10-inch component car subwoofer built to add dedicated low-frequency output to a vehicle audio system. It is intended for listeners who want more bass depth and impact than typical full-range car speakers can provide. Because it is a component subwoofer, it requires a separate enclosure and an external amplifier.\u003c\/p\u003e\u003cp\u003eThis Brutus-series model uses a dual 4-ohm voice-coil configuration for system-design flexibility. Its listed 1600-watt power handling supports use in higher-output bass systems when paired with an appropriately matched amplifier. The dual-coil layout lets an installer select a final wiring load that is compatible with the amplifier being used.\u003c\/p\u003e\u003cp\u003eThe BRW10D4 is engineered around a vented aluminum voice-coil former and a 3-inch voice coil. The vented former is designed to exchange heat during operation, helping manage heat buildup at the voice coil. This construction supports sustained bass playback while prioritizing controlled piston movement.\u003c\/p\u003e\u003cp\u003eA pressure-treated, double-stitched ribbed foam surround works with a dual poly-cotton spider assembly. The double-centered spider design is intended to help keep cone travel linear under power. Together, these parts support the subwoofer's moving assembly during bass-heavy listening.\u003c\/p\u003e\u003cp\u003eFor a complete upgrade, install the BRW10D4 in a correctly built subwoofer enclosure and power it with a compatible external amplifier. Its heavy-duty basket and vented motor structure make it suited to custom trunk, hatch, or cargo-area bass systems. Select the enclosure, amplifier output, and wiring configuration as a matched system rather than treating the subwoofer as a direct replacement for a full-range speaker.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Component Subwoofer:\u003c\/strong\u003e Adds dedicated bass reproduction to a custom car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Provides wiring flexibility for compatible amplifier loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1600-Watt Listed Power Handling:\u003c\/strong\u003e Supports use in higher-output amplified bass systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-Inch Vented Aluminum Former:\u003c\/strong\u003e Helps exchange heat around the voice-coil assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 70-Ounce Magnets:\u003c\/strong\u003e Forms part of the high-energy motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Poly-Cotton Spider:\u003c\/strong\u003e Helps support centered, controlled cone movement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BRW10D4 uses a heavy-gauge, powder-coated aluminum die-cast basket with back venting. Its moving assembly includes a pressure-treated double-stitched ribbed foam surround, dual poly-cotton spider, vented aluminum former, and dual 70-ounce magnets. These components are designed for a durable installation in a car-audio subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eThis is a passive component subwoofer, so an enclosure and external amplifier are required for operation. Wire its dual 4-ohm coils according to the amplifier's approved impedance capability, and use an enclosure designed for the selected system goals. Confirm mounting clearance, enclosure volume, and amplifier compatibility before installation.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631908511814,"sku":"BRW10D4","price":202.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/818HF4DutDL.jpg?v=1784386751"},{"product_id":"hifonics-bw-110a-10-low-profile-powered-subwoofer","title":"Hifonics BW-110A 10\" Low-Profile Powered Subwoofer","description":"\u003cp\u003eThe Hifonics Brutus BW-110A is a 10-inch amplified subwoofer designed to add low-frequency reinforcement where conventional subwoofer enclosures will not fit. Its low-profile, under-seat-oriented format is suited to cars and trucks with limited available cargo or cabin space. The integrated amplifier and enclosed design provide a compact path to adding bass without selecting a separate amplifier and enclosure.\u003c\/p\u003e\u003cp\u003eWith a stated 150-watt RMS rating and 800-watt maximum power rating, the BW-110A is intended for bass support rather than a large, high-output trunk installation. Its sound can be tailored using a variable bass boost, variable low-pass filter, fixed 35 Hz subsonic filter, and selectable phase control. These adjustments help blend the subwoofer with the vehicle's existing speakers and listening preferences.\u003c\/p\u003e\u003cp\u003eThe BW-110A accepts both RCA low-level and high-level speaker-level signals. This gives installers options for connecting an aftermarket receiver with preamp outputs or integrating with many factory audio systems. Adjustable input sensitivity further supports matching the subwoofer to the source unit's signal level.\u003c\/p\u003e\u003cp\u003eA PWM MOSFET power supply supports the onboard amplification, while a thermal-protection circuit is specified to help protect the unit during operation. Delayed soft remote turn-on is designed to reduce turn-on noise when the system powers up. The included remote subwoofer control allows convenient bass-level adjustment from the cabin.\u003c\/p\u003e\u003cp\u003eThis powered enclosure is a practical upgrade for drivers who want fuller bass response while retaining usable vehicle space. Its 4-ohm design, compact enclosure, and 12V DC operation make it appropriate for mobile-audio installations. Professional installation is recommended to confirm clearance, secure mounting, power wiring, grounding, and signal routing.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Powered Subwoofer:\u003c\/strong\u003e Combines a 10-inch woofer and built-in amplifier in one compact enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150W RMS Power:\u003c\/strong\u003e Provides rated continuous power for everyday bass reinforcement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRCA And High-Level Inputs:\u003c\/strong\u003e Supports connection to aftermarket or compatible factory audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Bass Boost:\u003c\/strong\u003e Offers 0 to +12 dB adjustment for added low-frequency emphasis.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Low-Pass Filter:\u003c\/strong\u003e Lets you set the upper bass cutoff from 85 to 150 Hz.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired Bass Remote:\u003c\/strong\u003e Allows convenient adjustment of subwoofer level from the cabin.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe BW-110A uses a low-profile enclosed format intended for space-conscious vehicle installations. It is specified with a glass-fiber enclosure material and a heavy-duty aluminum-alloy heat sink. The integrated PWM MOSFET power supply and thermal-protection circuit support the powered design.\u003c\/p\u003e\u003cp\u003eBefore purchase, measure the intended mounting area and allow room for wiring and ventilation. Connect it through either its RCA inputs or high-level inputs, use an appropriate fused 12V power connection and ground, and set the low-pass filter, phase, input sensitivity, and bass boost after installation. The included wired bass remote can be mounted within reach for routine level adjustment.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":45631911985222,"sku":"BW-110A","price":217.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/813LxEY6iFL.jpg?v=1784387401"},{"product_id":"infinity-1022mlt-10-marine-subwoofer-with-rgb-lighting","title":"Infinity 1022MLT 10\" Marine Subwoofer with RGB Lighting","description":"\u003cp\u003eThe Infinity 1022MLT is a 10-inch marine audio subwoofer designed to add low-frequency output to boat and outdoor audio systems. Its 4-ohm design and 250-watt RMS power handling make it suitable for use with a compatible external marine amplifier. The titanium-colored grille and integrated RGB lighting help it coordinate with Infinity Reference Marine speaker installations.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for boat, powersports, and other open-air applications where conventional car-audio equipment may be exposed to water, salt spray, sun, and washdowns. It carries an IPX5 marine rating and uses marine-oriented materials throughout its construction. The design focuses on delivering bass from 25 Hz to 500 Hz while supporting the durability needs of exterior installations.\u003c\/p\u003e\u003cp\u003eWith 89 dB sensitivity at 2.83V\/1m, the 1022MLT is engineered for solid output in open-air listening environments. Its 10-inch polypropylene cone and rubber surround are paired with a sealed motor structure and sealed magnet. These elements help support consistent bass reproduction while protecting key components from marine exposure.\u003c\/p\u003e\u003cp\u003eRGB LED lighting is integrated into the subwoofer and supports up to seven wiring-selected color options. Lighting can be operated through a manual hardwired connection or an external lighting controller, which is not included. An RGB lighting pigtail harness is supplied for installation.\u003c\/p\u003e\u003cp\u003eThe 1022MLT is a practical match for an Infinity Reference Marine system when a dedicated low-frequency driver is needed. It mounts in a 9-3\/16-inch cutout and requires 4-7\/16 inches of mounting depth. Pair it with an amplifier that is appropriate for a 4-ohm subwoofer and rated around its 250-watt RMS continuous power capability.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass output to a compatible marine audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Helps suit the speaker for wet outdoor environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB LED Lighting:\u003c\/strong\u003e Provides up to seven wiring-selected illumination color options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Motor Structure:\u003c\/strong\u003e Helps protect internal components from sea spray and washdowns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone and Rubber Surround:\u003c\/strong\u003e Uses weather-conscious materials for marine-duty bass reproduction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 1022MLT combines a titanium-colored grille with a UV-resistant, one-piece cast-polymer basket, sealed magnet, sealed motor structure, polypropylene cone, and rubber surround. Its 10-9\/16-inch external diameter and grille-mounted design provide a finished appearance on a suitable mounting surface. Stainless-steel mounting hardware and a foam gasket are included.\u003c\/p\u003e\u003cp\u003eUse the supplied template and verify the 9-3\/16-inch mounting cutout plus 4-7\/16 inches of mounting depth before cutting. Connect the subwoofer to a compatible 4-ohm amplifier, observing the marked positive and negative speaker terminals. Connect the included RGB pigtail harness for manual lighting wiring, or use a compatible external lighting controller if controller-based operation is desired.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45631981748294,"sku":"1022MLT","price":307.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71Ppqp6jKKL.jpg?v=1784391237"},{"product_id":"infinity-1022mlw-10-marine-subwoofer-with-rgb-lighting","title":"Infinity 1022MLW 10\" Marine Subwoofer with RGB Lighting","description":"\u003cp\u003eThe Infinity 1022MLW is a 10-inch marine subwoofer designed to add low-frequency output to a boat or other outdoor audio system. Its white finish, included grille, and integrated RGB LED lighting help it coordinate with marine speaker installations. It is built for applications where conventional car-audio subwoofers may not be suited to exposure from sun, salt, sea spray, and washdowns.\u003c\/p\u003e\u003cp\u003eThis passive 4-ohm subwoofer is intended for listeners who want fuller bass from a marine sound system without changing the visible character of the installation. With 250 watts RMS and 750 watts peak power handling, it is designed to pair with an appropriately matched external amplifier. Its 25Hz to 500Hz frequency response supports bass reproduction while leaving higher frequencies to the system's full-range speakers.\u003c\/p\u003e\u003cp\u003eThe 1022MLW uses a polypropylene cone and rubber surround to support durable low-frequency operation in marine environments. Its listed sensitivity is 89dB at 2.83V\/1m, and its free-air resonance is 35.60Hz. The single 4-ohm voice-coil configuration provides a straightforward load for a compatible marine amplifier.\u003c\/p\u003e\u003cp\u003eInfinity equips this model with an IPX5 marine rating and a sealed motor structure for outdoor use. The design also includes a sealed magnet and a UV-resistant one-piece cast-polymer basket. These construction details are intended to help the subwoofer withstand demanding marine installation conditions.\u003c\/p\u003e\u003cp\u003eIntegrated seven-color RGB LED lighting adds visual accent lighting around the subwoofer, and an RGB lighting pigtail harness is included. The 1022MLW can serve as the bass foundation in an Infinity Reference Marine system or as a subwoofer addition to an existing marine audio setup. Its 9-3\/16-inch mounting cutout and 4-7\/16-inch mounting depth should be checked against the available mounting surface before installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass output to compatible marine audio systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Power Handling:\u003c\/strong\u003e Matches with appropriately rated external amplification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Voice Coil:\u003c\/strong\u003e Provides a standard amplifier load configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Supports use in harsh outdoor marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeven-Color RGB Lighting:\u003c\/strong\u003e Adds selectable multi-color visual accent lighting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone And Rubber Surround:\u003c\/strong\u003e Uses weather-conscious materials for low-frequency playback.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe 1022MLW has a white marine-grade presentation with an included grille, polypropylene cone, rubber surround, sealed magnet, and sealed motor structure. Its one-piece cast-polymer basket is UV resistant, while stainless steel mounting hardware is supplied for installation. The 10-9\/16-inch external diameter and 1-7\/16-inch top height should be considered when planning panel clearance.\u003c\/p\u003e\u003cp\u003eUse the supplied foam gasket and stainless steel hardware when mounting the subwoofer in a surface with a 9-3\/16-inch cutout and at least 4-7\/16 inches of mounting depth. Connect it to an amplifier designed for a 4-ohm subwoofer load and size amplifier output around the subwoofer's 250-watt RMS rating. The included RGB lighting pigtail harness is used to connect the integrated lighting to a compatible lighting setup.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45631984205894,"sku":"1022MLW","price":307.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/712yOb-O2qL.jpg?v=1784391283"},{"product_id":"infinity-kappa-103wdssi-10-car-audio-subwoofer","title":"Infinity Kappa 103WDSSI 10\" Car Audio Subwoofer","description":"\u003cp\u003eThe Infinity Kappa 103WDSSI is a 10-inch component car audio subwoofer designed for adding dedicated low-frequency output to a custom vehicle audio system. It is intended for use with an external amplifier and an appropriate enclosure rather than as a powered, all-in-one bass solution. Its selectable impedance design helps simplify matching the subwoofer to different amplifier configurations.\u003c\/p\u003e\u003cp\u003eThis model is a practical choice for listeners building or updating a system that needs a compact 10-inch woofer with substantial continuous power capacity. It handles 450 watts RMS and 1,350 watts peak, with a 30 Hz to 175 Hz frequency-response rating. A 91 dB sensitivity rating supports efficient output when it is paired with suitable amplification.\u003c\/p\u003e\u003cp\u003eThe Kappa 103WDSSI uses Infinity's SSI, or Selectable Smart Impedance, system. A switch on the terminal assembly selects either a 2-ohm or 4-ohm impedance setting, allowing the same subwoofer to work with amplifiers optimized for either load. The amplifier should be turned off before changing the impedance selection.\u003c\/p\u003e\u003cp\u003eIts glass-fiber cone is designed to provide rigidity and damping for detailed bass reproduction, while the rubber surround supports cone movement. An aero-cooled 2-inch voice coil uses a two-sided ducted-airflow design to help manage heat during operation. This construction is intended to support reliable performance at its rated power level.\u003c\/p\u003e\u003cp\u003eThe Kappa 103WDSSI can be used in sealed, ported, or free-air installations. Infinity's published dimensions call for an 8-15\/16-inch cutout and 6-1\/4 inches of mounting depth, so enclosure and vehicle clearance should be confirmed before installation. It is supplied as a raw subwoofer for a custom system, allowing the enclosure and amplifier to be selected around the desired installation approach.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI Selectable Impedance:\u003c\/strong\u003e Switch between 2-ohm and 4-ohm operation to suit the amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e450W RMS Handling:\u003c\/strong\u003e Supports an amplifier delivering up to 450 watts RMS.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAero-Cooled Voice Coil:\u003c\/strong\u003e Ducted airflow helps cool the voice coil during use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlass-Fiber Cone:\u003c\/strong\u003e Rigid cone construction supports accurate, detailed bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Inch Voice Coil:\u003c\/strong\u003e Oversized coil design supports thermal management and control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8-Gauge Push Terminals:\u003c\/strong\u003e Integrated terminals accept speaker wire up to 8 gauge.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Kappa 103WDSSI combines a glass-fiber-over-paper cone, rubber surround, steel basket, and 2-inch voice coil. Its terminal assembly includes the SSI impedance selector and integrated push terminals for up to 8-gauge speaker wire. The round 10-inch driver has a black finish and does not include a grille.\u003c\/p\u003e\u003cp\u003eFor installation, confirm the 8-15\/16-inch cutout requirement and allow at least 6-1\/4 inches of mounting depth. A 0.8-cubic-foot sealed enclosure is recommended for a compact, controlled setup, while a 1.5-cubic-foot ported enclosure is recommended for a vented design. Match the amplifier to the selected 2-ohm or 4-ohm setting and the subwoofer's 450-watt RMS rating; an enclosure, amplifier, and wiring are not included.\u003c\/p\u003e","brand":"Infinity","offers":[{"title":"Default Title","offer_id":45632082542662,"sku":"INFSUBKA103WDSSIAM","price":338.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/711Qvq4antL.jpg?v=1784393617"},{"product_id":"jbl-jblmarsubsd102gam-10-stadium-marine-subwoofer","title":"JBL JBLMARSUBSD102GAM 10\" Stadium Marine Subwoofer","description":"\u003cp\u003eThe JBL JBLMARSUBSD102GAM is a 10-inch Stadium Marine woofer designed to add low-frequency output to boat and watercraft audio systems. It is intended for installations where open-water conditions, engine noise, and wind can make it difficult for music to sound full and balanced. With 300 watts RMS power handling, it is suited to a dedicated marine amplifier and subwoofer-capable system.\u003c\/p\u003e\u003cp\u003eThis marine woofer uses a Plus One polypropylene cone to provide increased effective cone area. The larger cone area helps move more air for stronger bass output while retaining the durable characteristics needed for marine use. Its 20Hz to 2kHz frequency response gives it the range to handle bass and lower midbass duties in an appropriate system.\u003c\/p\u003e\u003cp\u003eSelectable Smart Impedance, or SSI, lets the installer select either a 2-ohm or 4-ohm load using the woofer's built-in switch. This provides flexibility when matching the woofer to an amplifier or planning a system with multiple subwoofers. Choose the impedance setting before connecting the amplifier and configure the amplifier for the selected load.\u003c\/p\u003e\u003cp\u003eRGB perimeter illumination adds visible accent lighting around the woofer for nighttime use. The woofer can display seven colors without an external controller, while an optional compatible lighting controller can expand color customization. An integrated grille is included to help protect the front of the woofer in a marine installation.\u003c\/p\u003e\u003cp\u003eIts one-piece polymer basket, rubber surround, UV-resistant grille, and marine-oriented construction are designed for exposure to sun, moisture, and salt-air conditions. The woofer is suited for infinite-baffle, sealed-enclosure, or ported-enclosure applications. It can be used as the bass foundation for a Stadium Marine speaker system or as an upgrade to an existing amplified marine audio setup.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Power Handling:\u003c\/strong\u003e Supports use with a properly matched marine amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI Impedance Switch:\u003c\/strong\u003e Select 2-ohm or 4-ohm operation for system flexibility.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlus One Polypropylene Cone:\u003c\/strong\u003e Provides increased cone area for bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB Perimeter Illumination:\u003c\/strong\u003e Adds seven onboard lighting color options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMarine-Ready Construction:\u003c\/strong\u003e Polymer basket and rubber surround support outdoor use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Grille:\u003c\/strong\u003e Helps protect the woofer's front mounting surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe JBLMARSUBSD102GAM combines a dark-gray polypropylene cone, rubber surround, one-piece polymer basket, and integrated grille. Its grille is UV resistant, and the marine speaker platform is designed for weather exposure with IPX3 protection overall and IPX5 protection from the front. JBL also specifies 300 hours of salt-spray testing for the Stadium Marine speaker line.\u003c\/p\u003e\u003cp\u003eVerify a 9-9\/16-inch cutout and at least 4-7\/8 inches of mounting depth before installation. Use the included foam gasket, screws, and speed clips as appropriate for the mounting surface, connect the supplied LED cable for illumination, and use a compatible external amplifier. Set the SSI switch to 2 or 4 ohms before wiring the woofer, then match the amplifier's rated load and power output to the selected setting.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632130285638,"sku":"JBLMARSUBSD102GAM","price":207.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61zPGiaC5pL.jpg?v=1784395589"},{"product_id":"jbl-jblmarsubst10gryam-10-marine-audio-subwoofer","title":"JBL JBLMARSUBST10GRYAM 10\" Marine Audio Subwoofer","description":"\u003cp\u003eThe JBL JBLMARSUBST10GRYAM is a 10-inch marine audio subwoofer designed to add low-frequency output to a boat sound system. It is a passive 4-ohm subwoofer, so it requires a compatible external amplifier. The gray finish coordinates with marine installations while providing dedicated bass support for open-air listening.\u003c\/p\u003e\u003cp\u003eBuilt for marine environments, this Stage Marine subwoofer uses an IPX5-rated design with marine-grade materials and components. Its polypropylene cone, rubber surround, one-piece polymer basket, stainless-steel mounting hardware, and UV-resistant grille are intended for exposure to spray, sunlight, and washdowns. These construction details make it suited to boats where conventional car-audio components may not be appropriate.\u003c\/p\u003e\u003cp\u003eThe driver handles 200 watts RMS and 600 watts peak, with a 30 Hz to 250 Hz frequency response. JBL rates sensitivity at 88 dB measured at 2.83V. This combination is intended to reinforce bass frequencies that can be harder to hear in an open-air marine setting.\u003c\/p\u003e\u003cp\u003eInstallation flexibility is a central part of the design. The JBLMARSUBST10GRYAM can be used in an infinite-baffle\/free-air location, a sealed enclosure, or a vented enclosure. That gives installers options based on available boat space and the desired enclosure approach.\u003c\/p\u003e\u003cp\u003eUse this subwoofer as the low-frequency section of a marine system with full-range marine speakers and an amplifier matched for a 4-ohm load. Its 10-inch format offers a practical size for many helm, cockpit, cabin, and storage-compartment installations. JBL includes the primary mounting and connection accessories needed to prepare the driver for installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Marine Subwoofer:\u003c\/strong\u003e Adds dedicated bass reproduction to a compatible boat audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e200W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching up to its continuous power rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPX5 Marine Rating:\u003c\/strong\u003e Helps suit the subwoofer to wet outdoor marine environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a marine-ready cone material for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Enclosure Use:\u003c\/strong\u003e Supports free-air, sealed, or vented installation approaches.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGray UV-Resistant Grille:\u003c\/strong\u003e Provides a finished appearance with protection from sunlight exposure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe JBLMARSUBST10GRYAM combines a polypropylene cone and rubber surround with a one-piece polymer basket. Its attached grille is sealed and UV resistant, while the included mounting hardware is stainless steel. These materials are selected for marine use where moisture, salt spray, and sunlight are common concerns.\u003c\/p\u003e\u003cp\u003eConfirm the 9-11\/64-inch mounting cutout and 4-13\/32-inch mounting-depth requirements before cutting a panel. Connect the subwoofer to an amplifier that is stable at its 4-ohm nominal impedance, then select free-air, sealed, or vented mounting according to available space and system goals. The package includes a foam gasket, subwoofer pigtail harness, drill bit, and mounting hardware to assist with installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632130383942,"sku":"JBLMARSUBST10GRYAM","price":308.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61EiNMvqQXS.jpg?v=1784395631"},{"product_id":"jbl-club1000d-dual-10-ported-subwoofer-enclosure","title":"JBL CLUB1000D Dual 10\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe JBL CLUB1000D is a loaded, ported car subwoofer enclosure with two 10-inch polypropylene drivers. It is designed for vehicle audio systems that need added low-frequency output without separately selecting subwoofers and building a box. Its 2-ohm nominal impedance makes it intended for use with a compatible external car amplifier.\u003c\/p\u003e\u003cp\u003eWith 700 watts RMS and 1,400 watts peak power handling, the CLUB1000D is suited to bass-focused upgrades in cars, trucks, and SUVs with sufficient cargo-space clearance. The enclosure’s specified frequency response extends from 30Hz to 400Hz at -6dB. JBL rates sensitivity at 86dB measured at 1W\/1m.\u003c\/p\u003e\u003cp\u003eThe enclosure uses JBL Slipstream Port Technology, a double-flared port design intended to reduce air turbulence in the port. This design helps limit port noise and distortion associated with moving air through a conventional port. It is a practical choice for listeners seeking a ported enclosure character with strong low-end presence.\u003c\/p\u003e\u003cp\u003eIts wedge-shaped cabinet and rounded-corner design allow flexibility when positioning the enclosure in a trunk or cargo area. The cabinet measures 26 inches wide and uses two different depths, helping it fit against angled seating or cargo-area surfaces. A removable JBL logo badge lets the visible branding be positioned to suit the installation.\u003c\/p\u003e\u003cp\u003eThe CLUB1000D can be integrated into a system with an aftermarket amplifier, wiring, and source unit. JBL specifies at least 10 AWG speaker wire for connections to this dual-subwoofer enclosure. Secure mounting in a trunk or cargo-area corner helps keep the enclosure stable while preserving usable vehicle space.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual 10-Inch Drivers:\u003c\/strong\u003e Two polypropylene subwoofers provide a ready-to-install bass enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e700W RMS Handling:\u003c\/strong\u003e Supports substantial continuous power from a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Load:\u003c\/strong\u003e Designed for an amplifier stable at 2 ohms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlipstream Port Technology:\u003c\/strong\u003e Double-flared port design helps reduce turbulence and port noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedge Cabinet Shape:\u003c\/strong\u003e Supports flexible placement in trunks and cargo areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Lets you choose the JBL badge placement.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CLUB1000D uses a 13\/16-inch (21mm) MDF enclosure with a black carpet covering. Its wedge-box profile incorporates rounded corners and a ported design, while the two 10-inch drivers use polypropylene cones. The black finish is suited to a traditional trunk or cargo-area installation.\u003c\/p\u003e\u003cp\u003eConnect the enclosure’s positive and negative terminals to a compatible amplifier while observing correct polarity. JBL specifies a minimum 10 AWG (5mm²) speaker wire for the CLUB1000D, and recommends securing the enclosure to its mounting surface in a trunk or cargo-area location that does not interfere with cargo, folding rear seats, or the trunk lid. Confirm available clearance using its 26-inch width, 17-inch maximum depth, and 14-1\/8-inch height before installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632217317446,"sku":"JBLSUBCB1000D","price":494.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/615c8a7HmiL.jpg?v=1784398397"},{"product_id":"jbl-club1000p-10-ported-subwoofer-enclosure","title":"JBL CLUB1000P 10\" Ported Subwoofer Enclosure","description":"\u003cp\u003eThe JBL CLUB1000P is a loaded, ported car subwoofer enclosure built around one 10-inch polypropylene driver. It provides a ready-made bass upgrade for vehicles where adding a separate enclosure and subwoofer is not preferred. The enclosure presents a 2-ohm nominal load and is designed for use with an external car audio amplifier.\u003c\/p\u003e\u003cp\u003eThis model is suited to listeners who want added low-frequency extension in a compact wedge-style enclosure. Its rated frequency response is 35Hz to 400Hz at -6dB, giving it a range intended for bass reinforcement rather than full-range playback. JBL rates the CLUB1000P at 350 watts RMS and 1,050 watts peak power handling.\u003c\/p\u003e\u003cp\u003eThe CLUB1000P uses JBL Slipstream Port Technology, a double-flared port design intended to reduce air turbulence inside the port. Reducing turbulence helps limit audible port noise during bass playback. This design supports the use of a compact ported enclosure while maintaining low-frequency output.\u003c\/p\u003e\u003cp\u003eA wedge enclosure profile with rounded corners allows flexible placement in a trunk or cargo area. The angled cabinet shape can make it easier to position the enclosure around available vehicle space. A removable JBL logo badge lets the visible branding be oriented to suit the selected placement.\u003c\/p\u003e\u003cp\u003eThe enclosure uses 18mm MDF construction with a black carpet covering for an integrated automotive appearance. It connects directly to an amplifier's speaker outputs using the enclosure's positive and negative terminals. For a complete system, pair it with a properly configured amplifier and suitable power, ground, signal, and speaker wiring.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoaded 10-Inch Enclosure:\u003c\/strong\u003e Includes one installed 10-inch polypropylene subwoofer driver.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching for substantial bass output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-Ohm Nominal Impedance:\u003c\/strong\u003e Designed for an amplifier stable at a 2-ohm load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlipstream Port Technology:\u003c\/strong\u003e Double-flared port design helps reduce air turbulence and port noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedge Cabinet Profile:\u003c\/strong\u003e Rounded-corner shape supports flexible trunk or cargo-area positioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Allows the JBL badge to be positioned for the installation layout.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CLUB1000P enclosure is constructed from 11\/16-inch (18mm) MDF and finished in black carpet. Its wedge-shaped cabinet measures 17-5\/8 inches wide by 14-15\/16 inches high, with shallow and deep depths of 10-7\/16 and 13-5\/8 inches. The installed driver uses a 2-inch voice coil and a polypropylene cone.\u003c\/p\u003e\u003cp\u003eMount the enclosure securely in a location that does not interfere with cargo, folding rear seats, or the trunk lid; a trunk or cargo-area corner is commonly suitable. Connect its positive and negative terminals to an amplifier while observing polarity, and use at least 11 AWG (4mm²) speaker wire. JBL recommends professional installation when the required tools or vehicle-specific installation experience are not available.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632221806662,"sku":"JBLSUBCB1000P","price":340.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61ulb3nNJdL.jpg?v=1784398444"},{"product_id":"jbl-jblsubcb1000ssl-10-shallow-loaded-subwoofer-enclosure","title":"JBL JBLSUBCB1000SSL 10\" Shallow Loaded Subwoofer Enclosure","description":"\u003cp\u003eThe JBL Club 1000SSL is a compact loaded subwoofer enclosure designed to add low-frequency output where vehicle space is limited. It combines a single 10-inch shallow aluminum driver with an integrated passive radiator in a prebuilt enclosure. This makes it a practical option for drivers who want a finished bass solution rather than sourcing a separate subwoofer and box.\u003c\/p\u003e\u003cp\u003eThe enclosure uses a sealed, down-firing layout intended to deliver controlled bass response while keeping the cabinet profile low. Its specified frequency response is 35Hz to 400Hz at -6dB, supporting sub-bass and upper-bass reinforcement in a car audio system. With a 2-ohm nominal impedance, it is designed to connect to a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThe Club 1000SSL is rated to handle 350 watts RMS and 1,050 watts peak. Its 82.5dB sensitivity rating is measured at 1W\/1m, and it uses a 2-inch voice coil. These specifications provide clear amplifier-matching reference points when planning a system upgrade.\u003c\/p\u003e\u003cp\u003eJBL builds the enclosure from 3\/4-inch MDF and covers it in black carpet for everyday vehicle use. The cabinet measures only 4-1\/2 inches high, helping it fit in locations where a conventional subwoofer box may be impractical. A down-firing driver arrangement helps keep the woofer integrated into the enclosure design.\u003c\/p\u003e\u003cp\u003eRemovable feet allow the enclosure to be positioned in different orientations to suit available cargo-area space. The included removable JBL logo badge can be installed where desired, while the supplied steel plates and hardware support secure mounting. Use the Club 1000SSL as the bass section of an amplified car audio system with an amplifier that is appropriate for its 2-ohm load and power-handling rating.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Aluminum Driver:\u003c\/strong\u003e A shallow 250mm subwoofer is preinstalled in the enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDown-Firing Sealed Design:\u003c\/strong\u003e Keeps the driver facing downward in a compact sealed cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated Passive Radiator:\u003c\/strong\u003e Works with the enclosure design to support low-frequency output.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Provides a clear continuous-power target for amplifier matching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Feet:\u003c\/strong\u003e Allow flexible enclosure orientation for available vehicle space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Logo Badge:\u003c\/strong\u003e Lets you choose where to place the JBL branding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 1000SSL uses 3\/4-inch (18mm) MDF construction with a rugged black carpet covering. Its shallow cabinet measures 24-7\/8 inches wide, 4-1\/2 inches high, and 13-1\/8 inches deep. The enclosure includes a down-firing subwoofer, passive radiator, removable feet, removable badge, and supplied mounting hardware.\u003c\/p\u003e\u003cp\u003eConnect the enclosure's positive and negative terminals to an external amplifier while observing correct polarity. JBL specifies at least 4mm² (11 AWG) speaker wire for the enclosure connection, and the enclosure should be securely mounted where it will not obstruct cargo, folding seats, or the trunk lid. Confirm adequate clearance and avoid routing hardware or wiring near vehicle brake lines, fuel lines, or wiring harnesses.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632227606598,"sku":"JBLSUBCB1000SSL","price":460.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71s2OBp8zML.jpg?v=1784398494"},{"product_id":"jbl-club-102-10-car-audio-subwoofer","title":"JBL Club 102 10\" Car Audio Subwoofer","description":"\u003cp\u003eThe JBL Club 102 is a 10-inch car audio subwoofer designed to add dedicated low-frequency output to an aftermarket vehicle sound system. It is a passive driver, so it requires a separate compatible subwoofer amplifier and enclosure. With 350 watts RMS power handling, it is suited to systems that need stronger bass without stepping up to a larger 12-inch driver.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners building a trunk, cargo-area, or custom enclosure installation. Its Selectable Smart Impedance (SSI™) switch lets the installer choose either a 2-ohm or 4-ohm nominal load to better match an amplifier. That flexibility can also be useful when planning future amplifier or subwoofer-system changes.\u003c\/p\u003e\u003cp\u003eThe Club 102 uses a polypropylene driver with a 2-inch voice coil, high-roll rubber surround, and double-stack magnet design. Its vented basket is designed to promote airflow around the voice coil during operation. The result is a subwoofer engineered for controlled bass reproduction and sustained use within its rated power range.\u003c\/p\u003e\u003cp\u003eJBL rates the Club 102 for a 35Hz–500Hz frequency response at -6dB and 83dB sensitivity at 1W\/1m. A sealed enclosure can support a compact, controlled installation, while a properly designed vented enclosure can emphasize output in the upper-bass region. Enclosure selection, amplifier setup, and crossover settings will strongly affect final in-vehicle performance.\u003c\/p\u003e\u003cp\u003eThe Club 102 installs from the outside of its enclosure and uses a 9-inch cutout with a 5-1\/8-inch mounting depth. An EVA foam gasket is included to help create an airtight seal between the frame and enclosure. It is a practical choice for custom systems where enclosure space, amplifier impedance, and clean installation appearance all matter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Impedance Switch:\u003c\/strong\u003e Select 2-ohm or 4-ohm operation to match a compatible amplifier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e350W RMS Handling:\u003c\/strong\u003e Supports substantial continuous power in a properly configured system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Polypropylene Driver:\u003c\/strong\u003e Provides dedicated bass output for car audio installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-Stack Magnet:\u003c\/strong\u003e Supports the driver’s power-handling and excursion-focused design.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Steel Basket:\u003c\/strong\u003e Promotes airflow around the voice coil during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Supports cone travel while maintaining stable edge suspension.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe Club 102 combines a polypropylene cone with a large inverted dust cap, high-roll rubber surround, steel basket, and vented basket construction. Its trim-ring design is intended to conceal mounting hardware for a cleaner finished appearance. The included EVA foam gasket helps seal the subwoofer frame against the enclosure mounting surface.\u003c\/p\u003e\u003cp\u003eUse a compatible external amplifier rated to operate safely at the selected 2-ohm or 4-ohm setting, and turn the amplifier off before changing the SSI™ switch position. JBL specifies a 9-inch cutout and 5-1\/8-inch mounting depth; confirm clearance behind the mounting surface before installation. The terminals accept bare or tinned speaker wire, with 14 AWG to 8 AWG wire recommended depending on run length.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632266010694,"sku":"JBLSUBCB102","price":163.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61cf72_ODQL.jpg?v=1784398850"},{"product_id":"jbl-club-102sl-10-shallow-mount-subwoofer","title":"JBL CLUB 102SL 10\" Shallow-Mount Subwoofer","description":"\u003cp\u003eThe JBL CLUB 102SL is a 10-inch shallow-mount car subwoofer designed for systems where mounting depth is limited. It adds dedicated low-frequency output without requiring the depth of a conventional full-size subwoofer. Its 3-1\/4-inch mounting depth helps it suit compact enclosures and space-conscious vehicle installations.\u003c\/p\u003e\u003cp\u003eThis subwoofer is intended for listeners building or upgrading a powered car audio bass system with an external amplifier. It handles 350 watts RMS and 1,050 watts peak, giving installers a clear continuous-power target when matching an amplifier. The selectable impedance switch supports either a 2-ohm or 4-ohm nominal load to better match compatible amplifier configurations.\u003c\/p\u003e\u003cp\u003eAn aluminum woofer cone is used to maintain cone shape through its operating range. JBL pairs it with a high-roll rubber surround that supports cone movement and helps maximize usable cone area. The result is a focused bass foundation for music systems that need low-end reinforcement from a shallow driver.\u003c\/p\u003e\u003cp\u003eThe CLUB 102SL uses JBL SSI™ Selectable Smart Impedance technology, with a switch that selects 2-ohm or 4-ohm operation. This provides system-planning flexibility without changing the subwoofer. A vented basket is incorporated to help manage voice-coil heat during higher-output use.\u003c\/p\u003e\u003cp\u003eFor enclosure-based installations, JBL provides guidance for both sealed and vented boxes. A 0.53 ft³ enclosure is specified for either format, while the vented design adds a 2.76-inch diameter, 9.84-inch long port tuned to 43.4 Hz. This makes the CLUB 102SL a practical option for a custom bass upgrade where amplifier load, enclosure space, and mounting depth all matter.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSI™ Selectable Smart Impedance:\u003c\/strong\u003e Select 2-ohm or 4-ohm nominal impedance to match a compatible amplifier setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Woofer Cone:\u003c\/strong\u003e The aluminum cone is engineered to retain its shape through excursion for controlled bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVented Basket:\u003c\/strong\u003e Basket venting helps keep the voice coil cooler during sustained higher-output operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e The rubber surround supports cone travel while providing stable edge suspension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShallow-Mount Profile:\u003c\/strong\u003e A 3-1\/4-inch mounting depth helps fit installations with limited mounting clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurposeful Cosmetic Design:\u003c\/strong\u003e The integrated trim-ring fitment is designed to conceal mounting fasteners when installed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe CLUB 102SL combines an aluminum driver cone, high-roll rubber surround, inverted dust cap, and vented basket structure. Its 2-inch voice coil and 10-inch driver are housed in a shallow-mount format. The surround is shaped to accept the trim ring and provide a clean installed appearance.\u003c\/p\u003e\u003cp\u003eUse a compatible external amplifier and set the SSI™ switch for its appropriate 2-ohm or 4-ohm load. The subwoofer requires a 9-inch cutout and 3-1\/4 inches of mounting depth; verify clearance behind the mounting surface before cutting. JBL specifies a 0.53 ft³ sealed box or a 0.53 ft³ vented box with the stated port dimensions, and the package includes an EVA foam gasket for installation.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632272203846,"sku":"JBLSUBCB102SL","price":209.26,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61_Lg9zgB7L.jpg?v=1784398907"},{"product_id":"jbl-stage102-10-car-audio-subwoofer","title":"JBL STAGE102 10\" Car Audio Subwoofer","description":"\u003cp\u003eThe JBL STAGE102 is a 10-inch passive car audio subwoofer designed to add dedicated low-frequency output to an aftermarket sound system. It is intended for shoppers building a bass upgrade around a separate amplifier and enclosure. With a 4-ohm nominal impedance and 225-watt RMS power handling, it provides a practical match for appropriately rated mono or multi-channel amplifier systems.\u003c\/p\u003e\u003cp\u003eThis subwoofer is suited to drivers who want more weight and impact from kick drums, bass guitar, electronic music, and movie soundtracks than typical full-range car speakers can provide. Its rated frequency response is 35Hz to 200Hz, allowing it to cover the low-bass range while a crossover directs higher frequencies to the main speakers. The final bass character depends on the enclosure, amplifier setup, vehicle cabin, and crossover settings.\u003c\/p\u003e\u003cp\u003eA lightweight, stiff polypropylene cone is paired with a high-roll rubber surround for controlled movement and long-term durability in a vehicle environment. JBL rates the Stage 102 at 89dB sensitivity at 2.83V\/1m, with a 1.5-inch voice coil and 900-watt peak power handling. These elements support bass reproduction in systems designed around moderate amplifier power.\u003c\/p\u003e\u003cp\u003eThe STAGE102 can be used in sealed or vented enclosures, giving installers flexibility when balancing cargo-space needs and bass preferences. JBL specifies a 1.23-cubic-foot sealed enclosure for a compact, controlled setup. Its recommended vented alignment uses a 1.0-cubic-foot enclosure tuned to 30Hz for greater efficiency in the upper-bass region.\u003c\/p\u003e\u003cp\u003eAs a component subwoofer, the STAGE102 is not a self-powered enclosure and requires an external amplifier, speaker wire, and a suitable enclosure. It can serve as the low-frequency foundation of a first aftermarket audio system or as a straightforward replacement for an existing 10-inch subwoofer. A foam mounting gasket is included to help create a sealed installation between the driver frame and enclosure.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a car audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e225W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained listening levels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with compatible 4-ohm amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolypropylene Cone:\u003c\/strong\u003e Provides a lightweight, stiff diaphragm for bass reproduction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Roll Rubber Surround:\u003c\/strong\u003e Supports cone movement and durable vehicle use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealed Or Vented Compatibility:\u003c\/strong\u003e Allows enclosure selection based on space and output goals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe STAGE102 uses a polypropylene cone and rubber surround in a 10-inch frame with a 1.5-inch voice coil. Its outer diameter is 10 inches, while its mounting depth is 4-7\/16 inches. JBL includes a foam gasket, two two-color brand stickers, and an owner’s manual; a protective grille is not included.\u003c\/p\u003e\u003cp\u003eMount the subwoofer from the outside of a properly built enclosure and use the included gasket to help make the frame-to-box connection airtight. The terminals accept bare or tinned wire, with JBL recommending 14 AWG to 8 AWG speaker wire depending on run length; heavier wire is preferred for runs over 6 feet. Use an amplifier compatible with a 4-ohm load and set the system crossover and gain carefully for the enclosure and vehicle.\u003c\/p\u003e","brand":"JBL","offers":[{"title":"Default Title","offer_id":45632407797830,"sku":"STAGE102","price":114.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/71tl8dh66JL.jpg?v=1784399935"},{"product_id":"kenwood-kfc-w2541-10-4-ohm-component-subwoofer","title":"Kenwood KFC-W2541 10\" 4-Ohm Component Subwoofer","description":"\u003cp\u003eThe Kenwood KFC-W2541 is a 10-inch, 4-ohm component subwoofer designed to add low-frequency output to a vehicle audio system. It is intended for listeners who want deeper bass than factory full-range speakers can produce. As a passive subwoofer, it is installed in a suitable enclosure and powered by a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eWith 300 watts RMS power handling and a 33 to 300 Hz frequency response, the KFC-W2541 is built for dedicated bass reproduction. Its 84 dB sensitivity specification provides useful context when matching it with an amplifier and enclosure. The single 4-ohm configuration keeps system planning straightforward for a compatible mono or subwoofer amplifier channel.\u003c\/p\u003e\u003cp\u003eKenwood uses an injection polypropylene X-motif cone with a Diamond Array Pattern to help control resonance. The speaker also incorporates a stress-controlled spider, which is computer optimized to manage mechanical stress during operation. These design elements support consistent movement of the woofer assembly when reproducing bass material.\u003c\/p\u003e\u003cp\u003eThermal management is addressed through an aluminum bobbin, closed-yoke design, and advanced airflow control. The closed-yoke structure is paired with a ferrite magnet and steel basket. Together, these components form a durable platform for a custom subwoofer enclosure installation.\u003c\/p\u003e\u003cp\u003eThe KFC-W2541 can be used in either a sealed or ported enclosure based on the desired system approach. Kenwood specifies a 0.65-cubic-foot sealed enclosure or a 0.9-cubic-foot ported enclosure. It is also identified by Kenwood as a power match for the KAC-D5101 amplifier, making it a practical option for a matched Kenwood bass upgrade.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Subwoofer:\u003c\/strong\u003e Adds dedicated bass capability to a custom vehicle audio system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Handling:\u003c\/strong\u003e Supports amplifier matching for sustained bass playback.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Impedance:\u003c\/strong\u003e Simplifies pairing with compatible mono amplifier channels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX-Motif Cone:\u003c\/strong\u003e Helps control resonance for solid bass response.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal Management:\u003c\/strong\u003e Aluminum bobbin and airflow design manage heat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Enclosure Options:\u003c\/strong\u003e Supports Kenwood-specified sealed or ported box designs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-W2541 uses a steel basket, ferrite magnet, urethane surround, ABS gasket, paper diaphragm, and injection polypropylene cap. Its special features include the injection PP X-motif cone with Diamond Array Pattern, closed yoke with advanced airflow control, aluminum bobbin, and stress-controlled spider. The speaker measures 10-13\/16 inches wide and high, with an overall depth of 5-5\/8 inches.\u003c\/p\u003e\u003cp\u003ePlan the enclosure and vehicle location before installation. The subwoofer requires a 9-1\/16-inch cutout diameter and 4-7\/8 inches of mounting depth, while Kenwood specifies 0.65 cubic feet for a sealed enclosure or 0.9 cubic feet for a ported enclosure. Use a compatible external amplifier and wiring installation appropriate for a 4-ohm passive subwoofer; the optional CA-101G grille is available separately.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633158250566,"sku":"KFC-W2541","price":134.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/81sqoHKgv6L.jpg?v=1784406366"},{"product_id":"kenwood-kfc-w2542-10-subwoofer","title":"Kenwood KFC-W2542 10\" Subwoofer","description":"\u003cp\u003eThe Kenwood KFC-W2542 is a 10-inch passive car subwoofer designed to add dedicated low-frequency output to an aftermarket audio system. It is a practical choice for listeners who want more bass impact than full-range door speakers can provide. With a 4-ohm nominal impedance and 300-watt RMS power rating, it is intended for use with a compatible external amplifier.\u003c\/p\u003e\u003cp\u003eThis subwoofer is suited to single-subwoofer systems, compact custom installations, and upgrades where a 10-inch driver is the preferred fit. Its specified 44-300 Hz frequency response focuses its role on bass reproduction rather than full-range playback. The 82 dB sensitivity specification and 300-watt RMS rating give installers clear targets when selecting amplification.\u003c\/p\u003e\u003cp\u003eKenwood uses a polypropylene cone with a foam surround to support controlled cone movement. A steel basket provides the mounting structure, while the ferrite magnet assembly weighs 61.4 ounces. Together, these elements create a durable driver platform for a properly designed subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eThe KFC-W2542 uses a 6-layer copper voice coil on an aluminum former. Kenwood's heat-dissipation design uses air convection created by diaphragm movement to help cool the voice coil during operation. This construction is intended to support heat resistance and sustained power handling.\u003c\/p\u003e\u003cp\u003eFor system planning, the KFC-W2542 requires an enclosure, an external amplifier, wiring, and an audio signal source or receiver with appropriate subwoofer connectivity. Its 9-1\/16-inch cutout requirement and 5-1\/4-inch mounting depth should be checked before building or selecting an enclosure. It can be used in recommended sealed or ported enclosure designs, depending on available space and the desired system approach.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e300W RMS Power Handling:\u003c\/strong\u003e Matches with an amplifier rated appropriately for continuous 4-ohm operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1300W Peak Power:\u003c\/strong\u003e Provides a published maximum short-term power-handling rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 4-Ohm Configuration:\u003c\/strong\u003e Offers straightforward amplifier matching for a single-subwoofer system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6-Layer Copper Voice Coil:\u003c\/strong\u003e Uses a multi-layer coil construction for heat resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum Voice-Coil Former:\u003c\/strong\u003e Supports the voice coil within the motor assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePP Cone and Foam Surround:\u003c\/strong\u003e Combines a polypropylene diaphragm with a compliant foam surround.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-W2542 combines a polypropylene cone, foam surround, steel basket, and ferrite magnet structure. Its 61.4-ounce magnet and 6-layer copper voice coil with aluminum former are paired with a convection-based cooling approach. The driver has an overall width and height of 10-13\/16 inches and a net weight of 10.14 pounds.\u003c\/p\u003e\u003cp\u003ePlan for a 9-1\/16-inch mounting cutout and at least 5-1\/4 inches of mounting depth. Use an enclosure designed for a 10-inch subwoofer and pair the driver with a suitable external amplifier at its 4-ohm impedance. Confirm enclosure clearance, amplifier load capability, wiring, and crossover settings before installation.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633158709318,"sku":"KFC-W2542","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/516nSzGUfCL.jpg?v=1784406412"},{"product_id":"kenwood-kfc-wps1000f-10-shallow-mount-component-subwoofer","title":"Kenwood KFC-WPS1000F 10\" Shallow-Mount Component Subwoofer","description":"\u003cp\u003eThe Kenwood KFC-WPS1000F is a 10-inch shallow-mount component subwoofer designed to add dedicated low-frequency output where conventional full-depth subwoofers may not fit. Its compact mounting profile helps solve installation challenges in vehicles with limited enclosure depth. It is intended for use with a compatible external amplifier and properly designed subwoofer enclosure.\u003c\/p\u003e\u003cp\u003eThis model is a practical choice for listeners building a compact bass upgrade around a 4-ohm subwoofer load. With 250 watts RMS rated input power and 1,000 watts peak input power, it is suited to systems that prioritize correct power matching over headline wattage alone. Its 35 Hz to 800 Hz frequency response supports bass and upper-bass duties when integrated with a suitable crossover setup.\u003c\/p\u003e\u003cp\u003eThe KFC-WPS1000F uses a carbon-glass fiber honeycomb cone to provide a rigid diaphragm structure for low-frequency reproduction. A smooth linear surround and Super Linear Spider support controlled cone movement. Kenwood rates sensitivity at 90 dB\/W at 1 meter and specifies a 39 Hz free-air resonance.\u003c\/p\u003e\u003cp\u003eIts shallow-mount architecture is supported by an 85 mm mounting depth, making it useful for tight custom enclosures and installations with restricted behind-panel clearance. The driver has a 232 mm mounting-hole diameter and a 275 mm overall diameter. These measurements should be checked carefully against the available mounting surface and enclosure design before installation.\u003c\/p\u003e\u003cp\u003eKenwood incorporates a heat-transfer structure, ventilated die-cast aluminum basket, and push terminals into the KFC-WPS1000F design. The driver can be used in a manufacturer-recommended 0.6 cubic foot sealed enclosure. It can serve as a single-subwoofer upgrade or as part of a multi-subwoofer system when total impedance and amplifier capability are properly considered.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10-Inch Shallow-Mount Driver:\u003c\/strong\u003e Provides bass capability while requiring only 85 mm of mounting depth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e250W RMS Power Handling:\u003c\/strong\u003e Supports amplifier matching based on continuous rated input power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4-Ohm Nominal Impedance:\u003c\/strong\u003e Works with amplifiers designed to drive a 4-ohm subwoofer load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarbon-Glass Fiber Honeycomb Cone:\u003c\/strong\u003e Uses a rigid cone structure for controlled low-frequency operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat-Transfer Structure:\u003c\/strong\u003e Helps move heat away from the motor system during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush-Terminal Connections:\u003c\/strong\u003e Provides straightforward speaker-wire connection at the subwoofer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDesign \u0026amp; Installation\u003c\/h3\u003e\u003cp\u003eThe KFC-WPS1000F combines a carbon-glass fiber honeycomb cone with a smooth linear surround and Super Linear Spider. Its die-cast aluminum basket uses multiple ventilation openings and is paired with a heat-transfer motor structure. A removable rubber gasket is also specified by Kenwood.\u003c\/p\u003e\u003cp\u003ePlan the installation around the 232 mm mounting cutout, 85 mm mounting depth, and 4-ohm nominal impedance. Kenwood specifies a 0.6 cubic foot, or 17.0 liter, sealed enclosure recommendation for this model. Use an external amplifier whose output and impedance capability are appropriate for the subwoofer, and confirm clearance, enclosure volume, and wiring configuration before final assembly.\u003c\/p\u003e","brand":"Kenwood","offers":[{"title":"Default Title","offer_id":45633159331910,"sku":"KFC-WPS1000F","price":207.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0048\/4163\/5910\/files\/61WbQMDdf3L.jpg?v=1784406542"}],"url":"https:\/\/audiowatt.store\/collections\/10-inch-subwoofers.oembed?page=5","provider":"Audio Watt Store","version":"1.0","type":"link"}